arm64: zynqmp: Enable capsule update

Enable EFI capsule update features to be enabled by default also with all
dfu valid options for ZynqMP.

This feature was tested on Xilinx ZynqMP zcu104 board with defining
dfu_alt_info="mmc 0:1=boot.bin fat 0 1;u-boot.itb fat 0 1"
and
dfu_alt_info="sf 0:0=boot.bin raw 0 0x50000;u-boot.itb raw 0x80000
0x500000".

There is a need to increase malloc size for getting dfu mmc to work.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
CC: Sughosh Ganu <sughosh.ganu@linaro.org>
CC: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CC: Heinrich Schuchardt <xypron.glpk@gmx.de>

diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index c94e6b3..9414b26 100644 (file)
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -84,7 +84,11 @@ CONFIG_SATA_CEVA=y
 CONFIG_CLK_ZYNQMP=y
 CONFIG_DFU_TFTP=y
 CONFIG_DFU_TIMEOUT=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_NAND=y
 CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_DFU_MTD=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
@@ -177,3 +181,8 @@ CONFIG_TPM=y
 CONFIG_SPL_GZIP=y
 # CONFIG_SPL_HEXDUMP is not set
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_ON_DISK_EARLY=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 36f3d96..986af2b 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -27,7 +27,7 @@
 #endif
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 0x2000000)
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 0x4000000)
 
 /* Serial setup */
 #define CONFIG_CPU_ARMV8