[POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dts
authorWade Farnsworth <wfarnsworth@mvista.com>
Tue, 22 Jan 2008 20:13:39 +0000 (13:13 -0700)
committerKumar Gala <galak@kernel.crashing.org>
Thu, 24 Jan 2008 01:34:59 +0000 (19:34 -0600)
Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts

Also add compatible field for the soc node, so that it will be picked up
by of_platform_bus_probe().

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/mpc8641_hpcn.dts

index a719179..556a9ca 100644 (file)
                reg = <00000000 40000000>;      // 1G at 0x0
        };
 
+       localbus@f8005000 {
+               #address-cells = <2>;
+               #size-cells = <1>;
+               compatible = "fsl,mpc8641-localbus", "simple-bus";
+               reg = <f8005000 1000>;
+               interrupts = <13 2>;
+               interrupt-parent = <&mpic>;
+
+               ranges = <0 0 ff800000 00800000
+                         1 0 fe000000 01000000
+                         2 0 f8200000 00100000
+                         3 0 f8100000 00100000>;
+
+               flash@0,0 {
+                       compatible = "cfi-flash";
+                       reg = <0 0 00800000>;
+                       bank-width = <2>;
+                       device-width = <2>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       partition@0 {
+                               label = "kernel";
+                               reg = <00000000 00300000>;
+                       };
+                       partition@300000 {
+                               label = "firmware b";
+                               reg = <00300000 00100000>;
+                               read-only;
+                       };
+                       partition@400000 {
+                               label = "fs";
+                               reg = <00400000 00300000>;
+                       };
+                       partition@700000 {
+                               label = "firmware a";
+                               reg = <00700000 00100000>;
+                               read-only;
+                       };
+               };
+       };
+
        soc8641@f8000000 {
                #address-cells = <1>;
                #size-cells = <1>;
                device_type = "soc";
+               compatible = "simple-bus";
                ranges = <00000000 f8000000 00100000>;
                reg = <f8000000 00001000>;      // CCSRBAR
                bus-frequency = <0>;