* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
MAINTAINERS: Add PowerPC patterns
powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
powerpc: Make "intspec" pointers in irq_host->xlate() const
powerpc/8xx: DTLB Miss cleanup
powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
powerpc/8xx: Start using dcbX instructions in various copy routines
powerpc/8xx: Restore _PAGE_WRITETHRU
powerpc/8xx: Add missing Guarded setting in DTLB Error.
powerpc/8xx: Fixup DAR from buggy dcbX instructions.
powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
powerpc/8xx: Invalidate non present TLBs
powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
pseries/pseries: Add code to online/offline CPUs of a DLPAR node
powerpc: stop_this_cpu: remove the cpu from the online map.
powerpc/pseries: Add kernel based CPU DLPAR handling
sysfs/cpu: Add probe/release files
powerpc/pseries: Kernel DLPAR Infrastructure
...
See Documentation/cputopology.txt for more information.
+What: /sys/devices/system/cpu/probe
+ /sys/devices/system/cpu/release
+Date: November 2009
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description: Dynamic addition and removal of CPU's. This is not hotplug
+ removal, this is meant complete removal/addition of the CPU
+ from the system.
+
+ probe: writes to this file will dynamically add a CPU to the
+ system. Information written to the file to add CPU's is
+ architecture specific.
+
+ release: writes to this file dynamically remove a CPU from
+ the system. Information writtento the file to remove CPU's
+ is architecture specific.
What: /sys/devices/system/cpu/cpu#/node
Date: October 2009
additional_cpus=n (*) Use this to limit hotpluggable cpus. This option sets
cpu_possible_map = cpu_present_map + additional_cpus
+cede_offline={"off","on"} Use this option to disable/enable putting offlined
+ processors to an extended H_CEDE state on
+ supported pseries platforms.
+ If nothing is specified,
+ cede_offline is set to "on".
+
(*) Option valid only for following architectures
- ia64
- compatible : should be "fsl,fpga-pixis".
- reg : should contain the address and the length of the FPPGA register
set.
+- interrupt-parent: should specify phandle for the interrupt controller.
+- interrupts : should specify event (wakeup) IRQ.
Example (MPC8610HPCD):
board-control@e8000000 {
compatible = "fsl,fpga-pixis";
reg = <0xe8000000 32>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8>;
};
* Freescale BCSR GPIO banks
---------------------
On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board
design supports the internal wdt, then the device node for GPT0 should
-include the empty property 'fsl,has-wdt'.
+include the empty property 'fsl,has-wdt'. Note that this does not activate
+the watchdog. The timer will function as a GPT if the timer api is used, and
+it will function as watchdog if the watchdog device is used. The watchdog
+mode has priority over the gpt mode, i.e. if the watchdog is activated, any
+gpt api call to this timer will fail with -EBUSY.
+
+If you add the property
+ fsl,wdt-on-boot = <n>;
+GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it.
+If n>0, the watchdog is started with a timeout of n seconds. If n=0, the
+configuration of the watchdog is not touched. This is useful in two cases:
+- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later;
+- do not touch a configuration assigned by the boot loader which supervises
+ the boot process itself.
+
+The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
An mpc5200-gpt can be used as a single line GPIO controller. To do so,
add the following properties to the gpt node:
M: Paul Mackerras <paulus@au.ibm.com>
W: http://www.ibm.com/linux/ltc/projects/ppc
S: Supported
+F: arch/powerpc/boot/rs6000.h
LINUX FOR POWERPC (32-BIT AND 64-BIT)
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
L: linuxppc-dev@ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
S: Supported
+F: Documentation/powerpc/
+F: arch/powerpc/
LINUX FOR POWER MACINTOSH
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
S: Maintained
+F: arch/powerpc/platforms/powermac/
+F: drivers/macintosh/
LINUX FOR POWERPC EMBEDDED MPC5XXX
M: Grant Likely <grant.likely@secretlab.ca>
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
+F: arch/powerpc/platforms/512x/
+F: arch/powerpc/platforms/52xx/
LINUX FOR POWERPC EMBEDDED PPC4XX
M: Josh Boyer <jwboyer@linux.vnet.ibm.com>
L: linuxppc-dev@ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
+F: arch/powerpc/platforms/40x/
+F: arch/powerpc/platforms/44x/
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
M: Grant Likely <grant.likely@secretlab.ca>
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
+F: arch/powerpc/*/*virtex*
+F: arch/powerpc/*/*/*virtex*
LINUX FOR POWERPC EMBEDDED PPC8XX
M: Vitaly Bordug <vitb@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
S: Maintained
+F: arch/powerpc/platforms/83xx/
LINUX FOR POWERPC PA SEMI PWRFICIENT
M: Olof Johansson <olof@lixom.net>
W: http://www.pasemi.com/
L: linuxppc-dev@ozlabs.org
S: Supported
+F: arch/powerpc/platforms/pasemi/
+F: drivers/*/*pasemi*
+F: drivers/*/*/*pasemi*
LINUX SECURITY MODULE (LSM) FRAMEWORK
M: Chris Wright <chrisw@sous-sol.org>
bool
default y
+config NR_IRQS
+ int "Number of virtual interrupt numbers"
+ range 32 512
+ default "512"
+ help
+ This defines the number of virtual interrupt numbers the kernel
+ can manage. Virtual interrupt numbers are what you see in
+ /proc/interrupts. If you configure your system to have too few,
+ drivers will fail to load or worse - handle with care.
+
config STACKTRACE_SUPPORT
bool
default y
config REDBOOT
bool
-config HIBERNATE_32
- bool
- depends on (PPC_PMAC && !SMP) || BROKEN
- default y
-
-config HIBERNATE_64
- bool
- depends on BROKEN || (PPC_PMAC64 && EXPERIMENTAL)
- default y
-
config ARCH_HIBERNATION_POSSIBLE
bool
- depends on (PPC64 && HIBERNATE_64) || (PPC32 && HIBERNATE_32)
default y
config ARCH_SUSPEND_POSSIBLE
def_bool y
- depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
+ depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
+ PPC_85xx || PPC_86xx
config PPC_DCR_NATIVE
bool
Say N if you are unsure.
+config ARCH_CPU_PROBE_RELEASE
+ def_bool y
+ depends on HOTPLUG_CPU
+
config ARCH_ENABLE_MEMORY_HOTPLUG
def_bool y
CPU. Generally saying Y is safe, although some problems have been
reported with SMP Power Macintoshes with this option enabled.
+config SPARSE_IRQ
+ bool "Support sparse irq numbering"
+ default y
+ help
+ This enables support for sparse irqs. This is useful for distro
+ kernels that want to define a high CONFIG_NR_CPUS value but still
+ want to have low kernel memory footprint on smaller machines.
+
+ ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
+ out the irq_desc[] array in a more NUMA-friendly way. )
+
+ If you don't know what to do here, say Y.
+
config NUMA
bool "NUMA support"
depends on PPC64
select PPC_INDIRECT_PCI
select PCI_QUIRKS
+config FSL_PMC
+ bool
+ default y
+ depends on SUSPEND && (PPC_85xx || PPC_86xx)
+ help
+ Freescale MPC85xx/MPC86xx power management controller support
+ (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
+
config 4xx_SOC
bool
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
};
};
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
fpga@4,0 {
compatible = "gef,ppc9a-fpga-regs";
reg = <0x4 0x0 0x40>;
};
};
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
fpga@4,0 {
compatible = "gef,fpga-regs";
reg = <0x4 0x0 0x40>;
6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
fpga@4,0 {
compatible = "gef,fpga-regs";
reg = <0x4 0x0 0x40>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
/ {
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
model = "amcc,katmai";
compatible = "amcc,katmai";
dcr-parent = <&{/cpus/cpu@0}>;
memory {
device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+ reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
- ranges;
+ /* addr-child addr-parent size */
+ ranges = <0x4 0xe0000000 0x4 0xe0000000 0x20000000
+ 0xc 0x00000000 0xc 0x00000000 0x20000000
+ 0xd 0x00000000 0xd 0x00000000 0x80000000
+ 0xd 0x80000000 0xd 0x80000000 0x80000000
+ 0xe 0x00000000 0xe 0x00000000 0x80000000
+ 0xe 0x80000000 0xe 0x80000000 0x80000000
+ 0xf 0x00000000 0xf 0x00000000 0x80000000
+ 0xf 0x80000000 0xf 0x80000000 0x80000000>;
clock-frequency = <0>; /* Filled in by zImage */
SDRAM0: sdram {
ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
- /* Inbound 2GB range starting at 0 */
- dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
- /* Inbound 2GB range starting at 0 */
- dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
- /* This drives busses 10 to 0x1f */
+ /* This drives busses 0x10 to 0x1f */
bus-range = <0x10 0x1f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
- /* Inbound 2GB range starting at 0 */
- dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
- /* This drives busses 10 to 0x1f */
+ /* This drives busses 0x20 to 0x2f */
bus-range = <0x20 0x2f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
- /* Inbound 2GB range starting at 0 */
- dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
- /* This drives busses 10 to 0x1f */
+ /* This drives busses 0x30 to 0x3f */
bus-range = <0x30 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; /* Filled in by U-Boot */
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x0000003f>; /* Start at 6 */
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
+ sleep = <&pmc 0x03000000>;
};
ipic: pic@700 {
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
+ sleep = <&pmc 0x03000000>;
};
ipic:pic@700 {
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
+ sleep = <&pmc 0x03000000>;
};
ipic: pic@700 {
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
+ sleep = <&pmc 0x03000000>;
};
ipic: interrupt-controller@700 {
0xa800 0 0 2 &ipic 20 8
0xa800 0 0 3 &ipic 21 8
0xa800 0 0 4 &ipic 18 8>;
+ sleep = <&pmc 0x00010000>;
/* filled by u-boot */
bus-range = <0 0>;
clock-frequency = <0>;
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <16 2>;
};
- i2c@3000 {
+ i2c-sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <3 1>;
+ interrupt-parent = <&mpic>;
+ };
};
- };
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
};
dma@21300 {
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
+ sleep = <&pmc 0x00000400>;
+
dma-channel@0 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0x00000080>;
mdio@520 {
#address-cells = <1>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+ sleep = <&pmc 0x00000040>;
mdio@520 {
#address-cells = <1>;
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ duart-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
};
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
+ global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
- };
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ pmc: power@70 {
+ compatible = "fsl,mpc8568-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
};
crypto@30000 {
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xfe>;
fsl,descriptor-types-mask = <0x12b0ebf>;
+ sleep = <&pmc 0x01000000>;
};
mpic: pic@40000 {
compatible = "fsl,qe";
ranges = <0x0 0xe0080000 0x40000>;
reg = <0xe0080000 0x480>;
+ sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <396000000>;
fsl,qe-num-riscs = <2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+ sleep = <&pmc 0x80000000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+ sleep = <&pmc 0x20000000>;
clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
55 2 /* msg2_tx */
56 2 /* msg2_rx */>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00080000 /* controller */
+ &pmc 0x00040000>; /* message unit */
};
};
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
reg = <0xe0005000 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x08000000>;
ranges = <0x0 0x0 0xfe000000 0x02000000
0x1 0x0 0xf8000000 0x00008000
interrupts = <18 2>;
};
- i2c@3000 {
+ i2c-sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <3 1>;
+ interrupt-parent = <&mpic>;
+ };
+ };
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
};
};
- i2c@3100 {
+ duart-sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
};
L2: l2-cache-controller@20000 {
reg = <0x2e000 0x1000>;
interrupts = <72 0x8>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00200000>;
/* Filled in by U-Boot */
clock-frequency = <0>;
status = "disabled";
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xbfe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
+ sleep = <&pmc 0x01000000>;
};
mpic: pic@40000 {
};
global-utilities@e0000 {
- compatible = "fsl,mpc8569-guts";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8569-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
};
par_io@e0100 {
compatible = "fsl,qe";
ranges = <0x0 0xe0080000 0x40000>;
reg = <0xe0080000 0x480>;
+ sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <0>;
fsl,qe-num-riscs = <4>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+ sleep = <&pmc 0x20000000>;
clock-frequency = <33333333>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
55 2 /* msg2_tx */
56 2 /* msg2_rx */>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00080000>;
};
};
i-cache-line-size = <32>;
d-cache-size = <32768>; // L1
i-cache-size = <32768>; // L1
+ sleep = <&pmc 0x00008000 0 // core
+ &pmc 0x00004000 0>; // timebase
timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
5 0 0xe8480000 0x00008000
6 0 0xe84c0000 0x00008000
3 0 0xe8000000 0x00000020>;
+ sleep = <&pmc 0x08000000 0>;
flash@0,0 {
compatible = "cfi-flash";
compatible = "fsl,fpga-pixis";
reg = <3 0 0x20>;
ranges = <0 3 0 0x20>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8>;
sdcsr_pio: gpio-controller@a {
#gpio-cells = <2>;
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000004 0>;
dfsrr;
};
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000002 0>;
};
serial1: serial@4600 {
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000008 0>;
};
spi@7000 {
interrupt-parent = <&mpic>;
mode = "cpu";
gpios = <&sdcsr_pio 7 0>;
+ sleep = <&pmc 0x00000800 0>;
mmc-slot@0 {
compatible = "fsl,mpc8610hpcd-mmc-slot",
reg = <0x2c000 100>;
interrupts = <72 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x04000000 0>;
};
mpic: interrupt-controller@40000 {
};
global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,mpc8610-guts";
reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8610-pmc",
+ "fsl,mpc8641d-pmc";
+ reg = <0x70 0x20>;
+ };
};
wdt@e4000 {
fsl,playback-dma = <&dma00>;
fsl,capture-dma = <&dma01>;
fsl,fifo-depth = <8>;
+ sleep = <&pmc 0 0x08000000>;
};
ssi@16100 {
interrupt-parent = <&mpic>;
interrupts = <63 2>;
fsl,fifo-depth = <8>;
+ sleep = <&pmc 0 0x04000000>;
};
dma@21300 {
cell-index = <0>;
reg = <0x21300 0x4>; /* DMA general status register */
ranges = <0x0 0x21100 0x200>;
+ sleep = <&pmc 0x00000400 0>;
dma00: dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <1>;
reg = <0xc300 0x4>; /* DMA general status register */
ranges = <0x0 0xc100 0x200>;
+ sleep = <&pmc 0x00000200 0>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
+ sleep = <&pmc 0x80000000 0>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
bus-range = <1 3>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ sleep = <&pmc 0x40000000 0>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
0x0000 0 0 4 &mpic 7 1>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
+ sleep = <&pmc 0x20000000 0>;
clock-frequency = <33333333>;
};
};
--- /dev/null
+/*
+ * P1020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P1020";
+ compatible = "fsl,P1020RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ modal = "s25sl128b";
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI (RO) DTB Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI (RW) JFFS2 RFS";
+ };
+ };
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <46 0x2>;
+ phy_type = "ulpi";
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi@41600 {
+ compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * P2020 RDB Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
+ * eth1, eth2, sdhc, crypto, global-util, pci0.
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P2020";
+ compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ serial0 = &serial0;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ modal = "s25sl128b";
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI (RO) DTB Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI (RW) JFFS2 RFS";
+ };
+ };
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+
+ };
+
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ protected-sources = <
+ 42 76 77 78 79 /* serial1 , dma2 */
+ 29 30 34 26 /* enet0, pci1 */
+ 0xe0 0xe1 0xe2 0xe3 /* msi */
+ 0xe4 0xe5 0xe6 0xe7
+ >;
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * P2020 RDB Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, dma2, eth0, pci1, msi.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P2020";
+ compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ serial0 = &serial0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ serial0: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ };
+
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupt-parent = <&mpic>;
+ };
+
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ protected-sources = <
+ 17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
+ 16 20 21 22 23 28 /* L2, dma1, USB */
+ 03 35 36 40 31 32 33 /* mdio, enet1, enet2 */
+ 72 45 58 25 /* sdhci, crypto , pci */
+ >;
+ };
+
+ msi@41600 {
+ compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * P4080DS Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "fsl,P4080DS";
+ compatible = "fsl,P4080DS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ccsr = &soc;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+
+ rio0 = &rapidio0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,4080@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ };
+ };
+ cpu1: PowerPC,4080@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ };
+ };
+ cpu2: PowerPC,4080@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ };
+ };
+ cpu3: PowerPC,4080@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ };
+ };
+ cpu4: PowerPC,4080@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ };
+ };
+ cpu5: PowerPC,4080@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ };
+ };
+ cpu6: PowerPC,4080@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ };
+ };
+ cpu7: PowerPC,4080@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ };
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc: soc@ffe000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ memory-controller@8000 {
+ compatible = "fsl,p4080-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x12 2>;
+ };
+
+ memory-controller@9000 {
+ compatible = "fsl,p4080-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x12 2>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,p4080-pamu";
+ reg = <0x20000 0x10000>;
+ interrupts = <24 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <29 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <30 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <31 2>;
+ };
+ };
+
+ dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <32 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <33 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <34 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <35 2>;
+ };
+ };
+
+ spi@110000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2>;
+ interrupt-parent = <&mpic>;
+ espi,num-ss-bits = <4>;
+ mode = "cpu";
+
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ };
+
+ sdhc: sdhc@114000 {
+ compatible = "fsl,p4080-esdhc", "fsl,esdhc";
+ reg = <0x114000 0x1000>;
+ interrupts = <48 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i2c@118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ eeprom@51 {
+ compatible = "at24,24c256";
+ reg = <0x51>;
+ };
+ eeprom@52 {
+ compatible = "at24,24c256";
+ reg = <0x52>;
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0 0x1>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ i2c@119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial2: serial@11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial3: serial@11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ gpio0: gpio@130000 {
+ compatible = "fsl,p4080-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2>;
+ interrupt-parent = <&mpic>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ usb0: usb@210000 {
+ compatible = "fsl,p4080-usb2-mph",
+ "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <44 0x2>;
+ phy_type = "ulpi";
+ };
+
+ usb1: usb@211000 {
+ compatible = "fsl,p4080-usb2-dr",
+ "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <45 0x2>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+ };
+
+ rapidio0: rapidio@ffe0c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ reg = <0xf 0xfe0c0000 0 0x20000>;
+ ranges = <0 0 0xf 0xf5000000 0 0x01000000>;
+ interrupt-parent = <&mpic>;
+ /* err_irq bell_outb_irq bell_inb_irq
+ msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
+ interrupts = <16 2 56 2 57 2 60 2 61 2 62 2 63 2>;
+ };
+
+ localbus@ffe124000 {
+ compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xf 0xfe124000 0 0x1000>;
+ interrupts = <25 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xf 0xe8000000 0x08000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xfe200000 0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ clock-frequency = <0x1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1
+ 0000 0 0 2 &mpic 1 1
+ 0000 0 0 3 &mpic 2 1
+ 0000 0 0 4 &mpic 3 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xfe201000 0 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ clock-frequency = <0x1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1
+ 0000 0 0 2 &mpic 5 1
+ 0000 0 0 3 &mpic 6 1
+ 0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe202000 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xfe202000 0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ clock-frequency = <0x1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1
+ 0000 0 0 2 &mpic 9 1
+ 0000 0 0 3 &mpic 10 1
+ 0000 0 0 4 &mpic 11 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+};
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
- /* Bamboo has all 4 IRQ pins tied together per slot */
interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
- /* IDSEL 1 */
- 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-
- /* IDSEL 2 */
- 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
-
- /* IDSEL 3 */
- 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
-
- /* IDSEL 4 */
- 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
+ /* IDSEL 12 */
+ 0x6000 0x0 0x0 0x0 &UIC0 0x19 0x8
>;
};
};
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
+CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#include <linux/compiler.h>
#include <linux/types.h>
+#include <linux/errno.h>
#include <linux/of.h>
+/*
+ * USB Controller pram common to QE and CPM.
+ */
+struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep[4];
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ /* Fields down below are QE-only */
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
+/*
+ * Function code bits, usually generic to devices.
+ */
+#ifdef CONFIG_CPM1
+#define CPMFCR_GBL ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_TC2 ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_DTB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_BDB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#else
+#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
+#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
+#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
+#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
+#endif
+#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
+
/* Opcodes common to CPM1 and CPM2
*/
#define CPM_CR_INIT_TRX ((ushort)0x0000)
#define BD_I2C_START (0x0400)
int cpm_muram_init(void);
+
+#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
int cpm_muram_free(unsigned long offset);
unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
void __iomem *cpm_muram_addr(unsigned long offset);
unsigned long cpm_muram_offset(void __iomem *addr);
dma_addr_t cpm_muram_dma(void __iomem *addr);
+#else
+static inline unsigned long cpm_muram_alloc(unsigned long size,
+ unsigned long align)
+{
+ return -ENOSYS;
+}
+
+static inline int cpm_muram_free(unsigned long offset)
+{
+ return -ENOSYS;
+}
+
+static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
+ unsigned long size)
+{
+ return -ENOSYS;
+}
+
+static inline void __iomem *cpm_muram_addr(unsigned long offset)
+{
+ return NULL;
+}
+
+static inline unsigned long cpm_muram_offset(void __iomem *addr)
+{
+ return -ENOSYS;
+}
+
+static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+ return 0;
+}
+#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
+
+#ifdef CONFIG_CPM
int cpm_command(u32 command, u8 opcode);
+#else
+static inline int cpm_command(u32 command, u8 opcode)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_CPM */
int cpm2_gpiochip_add32(struct device_node *np);
char res2[2]; /* Reserved */
} iic_t;
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res;
- ushort spi_rpbase; /* Relocation pointer */
- ushort spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */
-#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */
-#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-/* SPIE fields */
-#define SPIE_MME 0x20
-#define SPIE_TXE 0x10
-#define SPIE_BSY 0x04
-#define SPIE_TXB 0x02
-#define SPIE_RXB 0x01
-
/*
* RISC Controller Configuration Register definitons
*/
__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
}
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
-#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
-#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
-#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
-#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
-
/* Parameter RAM offsets from the base.
*/
#define PROFF_SCC1 ((uint)0x8000)
uint iic_txtmp; /* Internal */
} iic_t;
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res; /* Tx temp. */
- uint spi_res1[4]; /* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x) ((x) &0xF)
-
-#define SPI_EB ((u_char)0x10) /* big endian byte order */
-
/* IDMA parameter RAM
*/
typedef struct idma {
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
+ DO_KVM n; \
mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
+ DO_KVM n; \
mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \
std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \
#include <asm/page.h>
+pte_t *huge_pte_offset_and_shift(struct mm_struct *mm,
+ unsigned long addr, unsigned *shift);
+
+void flush_dcache_icache_hugepage(struct page *page);
int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
unsigned long len);
unsigned long end, unsigned long floor,
unsigned long ceiling);
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte);
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep);
-
/*
* The version of vma_mmu_pagesize() in arch/powerpc/mm/hugetlbpage.c needs
* to override the version in mm/hugetlb.c
{
}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
+ return __pte(old);
+}
+
static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
+ pte_t pte;
+ pte = huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+ flush_tlb_page(vma, addr);
}
static inline int huge_pte_none(pte_t pte)
#define H_QUERY_INT_STATE 0x1E4
#define H_POLL_PENDING 0x1D8
#define H_ILLAN_ATTRIBUTES 0x244
+#define H_MODIFY_HEA_QP 0x250
+#define H_QUERY_HEA_QP 0x254
+#define H_QUERY_HEA 0x258
+#define H_QUERY_HEA_PORT 0x25C
+#define H_MODIFY_HEA_PORT 0x260
+#define H_REG_BCMC 0x264
+#define H_DEREG_BCMC 0x268
+#define H_REGISTER_HEA_RPAGES 0x26C
+#define H_DISABLE_AND_GET_HEA 0x270
+#define H_GET_HEA_INFO 0x274
+#define H_ALLOC_HEA_RESOURCE 0x278
+#define H_ADD_CONN 0x284
+#define H_DEL_CONN 0x288
#define H_JOIN 0x298
#define H_VASI_STATE 0x2A4
#define H_ENABLE_CRQ 0x2B0
get_paca()->hard_enabled = 0; \
} while(0)
-static inline int irqs_disabled_flags(unsigned long flags)
-{
- return flags == 0;
-}
-
#else
#if defined(CONFIG_BOOKE)
/* USB Controller.
*/
-typedef struct usb_ctlr {
+typedef struct cpm_usb_ctlr {
u8 usb_usmod;
u8 usb_usadr;
u8 usb_uscom;
} __attribute__ ((packed));
/* USB Controller */
-struct usb_ctlr {
+struct qe_usb_ctlr {
u8 usb_usmod;
u8 usb_usadr;
u8 usb_uscom;
} __attribute__ ((packed));
/* MCC */
-struct mcc {
+struct qe_mcc {
__be32 mcce; /* MCC event register */
__be32 mccm; /* MCC mask register */
__be32 mccf; /* MCC configuration register */
struct qe_mux qmx; /* QE Multiplexer */
struct qe_timers qet; /* QE Timers */
struct spi spi[0x2]; /* spi */
- struct mcc mcc; /* mcc */
+ struct qe_mcc mcc; /* mcc */
struct qe_brg brg; /* brg */
- struct usb_ctlr usb; /* USB */
+ struct qe_usb_ctlr usb; /* USB */
struct si1 si1; /* SI */
u8 res11[0x800];
struct sir sir; /* SI Routing Tables */
#include <asm/atomic.h>
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
/* Define a way to iterate across irqs. */
#define for_each_irq(i) \
for ((i) = 0; (i) < NR_IRQS; ++(i))
*/
#define NO_IRQ_IGNORE ((unsigned int)-1)
-/* Total number of virq in the platform (make it a CONFIG_* option ? */
-#define NR_IRQS 512
+/* Total number of virq in the platform */
+#define NR_IRQS CONFIG_NR_IRQS
/* Number of irqs reserved for the legacy controller */
#define NUM_ISA_INTERRUPTS 16
+/* Same thing, used by the generic IRQ code */
+#define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS
+
/* This type is the placeholder for a hardware interrupt number. It has to
* be big enough to enclose whatever representation is used by a given
* platform.
* interrupt controller has for that line)
*/
int (*xlate)(struct irq_host *h, struct device_node *ctrler,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type);
};
* of the of_irq_map_*() functions.
*/
extern unsigned int irq_create_of_mapping(struct device_node *controller,
- u32 *intspec, unsigned int intsize);
+ const u32 *intspec, unsigned int intsize);
/**
* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
};
struct kvm_sregs {
+ __u32 pvr;
+ union {
+ struct {
+ __u64 sdr1;
+ struct {
+ struct {
+ __u64 slbe;
+ __u64 slbv;
+ } slb[64];
+ } ppc64;
+ struct {
+ __u32 sr[16];
+ __u64 ibat[8];
+ __u64 dbat[8];
+ } ppc32;
+ } s;
+ __u8 pad[1020];
+ } u;
};
struct kvm_fpu {
#define BOOKE_INTERRUPT_SPE_FP_ROUND 34
#define BOOKE_INTERRUPT_PERFORMANCE_MONITOR 35
+/* book3s */
+
+#define BOOK3S_INTERRUPT_SYSTEM_RESET 0x100
+#define BOOK3S_INTERRUPT_MACHINE_CHECK 0x200
+#define BOOK3S_INTERRUPT_DATA_STORAGE 0x300
+#define BOOK3S_INTERRUPT_DATA_SEGMENT 0x380
+#define BOOK3S_INTERRUPT_INST_STORAGE 0x400
+#define BOOK3S_INTERRUPT_INST_SEGMENT 0x480
+#define BOOK3S_INTERRUPT_EXTERNAL 0x500
+#define BOOK3S_INTERRUPT_ALIGNMENT 0x600
+#define BOOK3S_INTERRUPT_PROGRAM 0x700
+#define BOOK3S_INTERRUPT_FP_UNAVAIL 0x800
+#define BOOK3S_INTERRUPT_DECREMENTER 0x900
+#define BOOK3S_INTERRUPT_SYSCALL 0xc00
+#define BOOK3S_INTERRUPT_TRACE 0xd00
+#define BOOK3S_INTERRUPT_PERFMON 0xf00
+#define BOOK3S_INTERRUPT_ALTIVEC 0xf20
+#define BOOK3S_INTERRUPT_VSX 0xf40
+
+#define BOOK3S_IRQPRIO_SYSTEM_RESET 0
+#define BOOK3S_IRQPRIO_DATA_SEGMENT 1
+#define BOOK3S_IRQPRIO_INST_SEGMENT 2
+#define BOOK3S_IRQPRIO_DATA_STORAGE 3
+#define BOOK3S_IRQPRIO_INST_STORAGE 4
+#define BOOK3S_IRQPRIO_ALIGNMENT 5
+#define BOOK3S_IRQPRIO_PROGRAM 6
+#define BOOK3S_IRQPRIO_FP_UNAVAIL 7
+#define BOOK3S_IRQPRIO_ALTIVEC 8
+#define BOOK3S_IRQPRIO_VSX 9
+#define BOOK3S_IRQPRIO_SYSCALL 10
+#define BOOK3S_IRQPRIO_MACHINE_CHECK 11
+#define BOOK3S_IRQPRIO_DEBUG 12
+#define BOOK3S_IRQPRIO_EXTERNAL 13
+#define BOOK3S_IRQPRIO_DECREMENTER 14
+#define BOOK3S_IRQPRIO_PERFORMANCE_MONITOR 15
+#define BOOK3S_IRQPRIO_MAX 16
+
+#define BOOK3S_HFLAG_DCBZ32 0x1
+#define BOOK3S_HFLAG_SLB 0x2
+
#define RESUME_FLAG_NV (1<<0) /* Reload guest nonvolatile state? */
#define RESUME_FLAG_HOST (1<<1) /* Resume host? */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_H__
+#define __ASM_KVM_BOOK3S_H__
+
+#include <linux/types.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_ppc.h>
+
+struct kvmppc_slb {
+ u64 esid;
+ u64 vsid;
+ u64 orige;
+ u64 origv;
+ bool valid;
+ bool Ks;
+ bool Kp;
+ bool nx;
+ bool large;
+ bool class;
+};
+
+struct kvmppc_sr {
+ u32 raw;
+ u32 vsid;
+ bool Ks;
+ bool Kp;
+ bool nx;
+};
+
+struct kvmppc_bat {
+ u64 raw;
+ u32 bepi;
+ u32 bepi_mask;
+ bool vs;
+ bool vp;
+ u32 brpn;
+ u8 wimg;
+ u8 pp;
+};
+
+struct kvmppc_sid_map {
+ u64 guest_vsid;
+ u64 guest_esid;
+ u64 host_vsid;
+ bool valid;
+};
+
+#define SID_MAP_BITS 9
+#define SID_MAP_NUM (1 << SID_MAP_BITS)
+#define SID_MAP_MASK (SID_MAP_NUM - 1)
+
+struct kvmppc_vcpu_book3s {
+ struct kvm_vcpu vcpu;
+ struct kvmppc_sid_map sid_map[SID_MAP_NUM];
+ struct kvmppc_slb slb[64];
+ struct {
+ u64 esid;
+ u64 vsid;
+ } slb_shadow[64];
+ u8 slb_shadow_max;
+ struct kvmppc_sr sr[16];
+ struct kvmppc_bat ibat[8];
+ struct kvmppc_bat dbat[8];
+ u64 hid[6];
+ int slb_nr;
+ u64 sdr1;
+ u64 dsisr;
+ u64 hior;
+ u64 msr_mask;
+ u64 vsid_first;
+ u64 vsid_next;
+ u64 vsid_max;
+ int context_id;
+};
+
+#define CONTEXT_HOST 0
+#define CONTEXT_GUEST 1
+#define CONTEXT_GUEST_END 2
+
+#define VSID_REAL 0xfffffffffff00000
+#define VSID_REAL_DR 0xffffffffffe00000
+#define VSID_REAL_IR 0xffffffffffd00000
+#define VSID_BAT 0xffffffffffc00000
+#define VSID_PR 0x8000000000000000
+
+extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
+extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask);
+extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end);
+extern void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 new_msr);
+extern void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu);
+extern void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu);
+extern int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte);
+extern int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr);
+extern void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu);
+extern struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data);
+extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr, bool data);
+extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr);
+extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec);
+extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat,
+ bool upper, u32 val);
+
+extern u32 kvmppc_trampoline_lowmem;
+extern u32 kvmppc_trampoline_enter;
+
+static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
+{
+ return container_of(vcpu, struct kvmppc_vcpu_book3s, vcpu);
+}
+
+static inline ulong dsisr(void)
+{
+ ulong r;
+ asm ( "mfdsisr %0 " : "=r" (r) );
+ return r;
+}
+
+extern void kvm_return_point(void);
+
+#define INS_DCBZ 0x7c0007ec
+
+#endif /* __ASM_KVM_BOOK3S_H__ */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_ASM_H__
+#define __ASM_KVM_BOOK3S_ASM_H__
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+
+#include <asm/kvm_asm.h>
+
+.macro DO_KVM intno
+ .if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \
+ (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \
+ (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \
+ (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \
+ (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
+ (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
+ (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+ (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
+ (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
+ (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
+ (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \
+ (\intno == BOOK3S_INTERRUPT_SYSCALL) || \
+ (\intno == BOOK3S_INTERRUPT_TRACE) || \
+ (\intno == BOOK3S_INTERRUPT_PERFMON) || \
+ (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \
+ (\intno == BOOK3S_INTERRUPT_VSX)
+
+ b kvmppc_trampoline_\intno
+kvmppc_resume_\intno:
+
+ .endif
+.endm
+
+#else
+
+.macro DO_KVM intno
+.endm
+
+#endif /* CONFIG_KVM_BOOK3S_64_HANDLER */
+
+#endif /* __ASM_KVM_BOOK3S_ASM_H__ */
#define __POWERPC_KVM_HOST_H__
#include <linux/mutex.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/kvm_types.h>
#include <asm/kvm_asm.h>
#define KVM_NR_PAGE_SIZES 1
#define KVM_PAGES_PER_HPAGE(x) (1UL<<31)
+#define HPTEG_CACHE_NUM 1024
+
struct kvm;
struct kvm_run;
struct kvm_vcpu;
u32 dec_exits;
u32 ext_intr_exits;
u32 halt_wakeup;
+#ifdef CONFIG_PPC64
+ u32 pf_storage;
+ u32 pf_instruc;
+ u32 sp_storage;
+ u32 sp_instruc;
+ u32 queue_intr;
+ u32 ld;
+ u32 ld_slow;
+ u32 st;
+ u32 st_slow;
+#endif
};
enum kvm_exit_types {
struct kvm_arch {
};
+struct kvmppc_pte {
+ u64 eaddr;
+ u64 vpage;
+ u64 raddr;
+ bool may_read;
+ bool may_write;
+ bool may_execute;
+};
+
+struct kvmppc_mmu {
+ /* book3s_64 only */
+ void (*slbmte)(struct kvm_vcpu *vcpu, u64 rb, u64 rs);
+ u64 (*slbmfee)(struct kvm_vcpu *vcpu, u64 slb_nr);
+ u64 (*slbmfev)(struct kvm_vcpu *vcpu, u64 slb_nr);
+ void (*slbie)(struct kvm_vcpu *vcpu, u64 slb_nr);
+ void (*slbia)(struct kvm_vcpu *vcpu);
+ /* book3s */
+ void (*mtsrin)(struct kvm_vcpu *vcpu, u32 srnum, ulong value);
+ u32 (*mfsrin)(struct kvm_vcpu *vcpu, u32 srnum);
+ int (*xlate)(struct kvm_vcpu *vcpu, gva_t eaddr, struct kvmppc_pte *pte, bool data);
+ void (*reset_msr)(struct kvm_vcpu *vcpu);
+ void (*tlbie)(struct kvm_vcpu *vcpu, ulong addr, bool large);
+ int (*esid_to_vsid)(struct kvm_vcpu *vcpu, u64 esid, u64 *vsid);
+ u64 (*ea_to_vp)(struct kvm_vcpu *vcpu, gva_t eaddr, bool data);
+ bool (*is_dcbz32)(struct kvm_vcpu *vcpu);
+};
+
+struct hpte_cache {
+ u64 host_va;
+ u64 pfn;
+ ulong slot;
+ struct kvmppc_pte pte;
+};
+
struct kvm_vcpu_arch {
- u32 host_stack;
+ ulong host_stack;
u32 host_pid;
+#ifdef CONFIG_PPC64
+ ulong host_msr;
+ ulong host_r2;
+ void *host_retip;
+ ulong trampoline_lowmem;
+ ulong trampoline_enter;
+ ulong highmem_handler;
+ ulong host_paca_phys;
+ struct kvmppc_mmu mmu;
+#endif
u64 fpr[32];
ulong gpr[32];
ulong xer;
ulong msr;
+#ifdef CONFIG_PPC64
+ ulong shadow_msr;
+ ulong hflags;
+#endif
u32 mmucr;
ulong sprg0;
ulong sprg1;
u32 ivor[64];
ulong ivpr;
u32 pir;
+ u32 pvr;
u32 shadow_pid;
u32 pid;
#endif
u32 last_inst;
+#ifdef CONFIG_PPC64
+ ulong fault_dsisr;
+#endif
ulong fault_dear;
ulong fault_esr;
gpa_t paddr_accessed;
u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
- struct timer_list dec_timer;
+ struct hrtimer dec_timer;
+ struct tasklet_struct tasklet;
+ u64 dec_jiffies;
unsigned long pending_exceptions;
+
+#ifdef CONFIG_PPC64
+ struct hpte_cache hpte_cache[HPTEG_CACHE_NUM];
+ int hpte_cache_offset;
+#endif
};
#endif /* __POWERPC_KVM_HOST_H__ */
extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
extern char kvmppc_handlers_start[];
extern unsigned long kvmppc_handler_len;
+extern void kvmppc_handler_highmem(void);
extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
// Used to pass parms from the OS to PLIC for SetAsrAndRfid
u64 saved_gpr3; // Saved GPR3 x20-x27
u64 saved_gpr4; // Saved GPR4 x28-x2F
- u64 saved_gpr5; // Saved GPR5 x30-x37
+ union {
+ u64 saved_gpr5; /* Saved GPR5 x30-x37 */
+ struct {
+ u8 cede_latency_hint; /* x30 */
+ u8 reserved[7]; /* x31-x36 */
+ } fields;
+ } gpr5_dword;
+
u8 dtl_enable_mask; // Dispatch Trace Log mask x38-x38
u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39
void (*suspend_disable_irqs)(void);
void (*suspend_enable_irqs)(void);
#endif
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+ ssize_t (*cpu_probe)(const char *, size_t);
+ ssize_t (*cpu_release)(const char *, size_t);
+#endif
};
extern void e500_idle(void);
struct macio_bus *bus; /* macio bus this device is on */
struct macio_dev *media_bay; /* Device is part of a media bay */
struct of_device ofdev;
+ struct device_dma_parameters dma_parms; /* ide needs that */
int n_resources;
struct resource resource[MACIO_DEV_COUNT_RESOURCES];
int n_interrupts;
return res->end - res->start + 1;
}
+extern int macio_enable_devres(struct macio_dev *dev);
+
extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
extern void macio_release_resource(struct macio_dev *dev, int resource_no);
extern int macio_request_resources(struct macio_dev *dev, const char *name);
int (*resume)(struct macio_dev* dev);
int (*shutdown)(struct macio_dev* dev);
+#ifdef CONFIG_PMAC_MEDIABAY
+ void (*mediabay_event)(struct macio_dev* dev, int mb_state);
+#endif
struct device_driver driver;
};
#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
#define MB_POWER 6 /* media bay contains a Power device (???) */
#define MB_NO 7 /* media bay contains nothing */
-/* Number of bays in the machine or 0 */
-extern int media_bay_count;
+struct macio_dev;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-#include <linux/ide.h>
+#ifdef CONFIG_PMAC_MEDIABAY
-int check_media_bay_by_base(unsigned long base, int what);
-/* called by IDE PMAC host driver to register IDE controller for media bay */
-int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
- int irq, ide_hwif_t *hwif);
+/* Check the content type of the bay, returns MB_NO if the bay is still
+ * transitionning
+ */
+extern int check_media_bay(struct macio_dev *bay);
-int check_media_bay(struct device_node *which_bay, int what);
+/* The ATA driver uses the calls below to temporarily hold on the
+ * media bay callbacks while initializing the interface
+ */
+extern void lock_media_bay(struct macio_dev *bay);
+extern void unlock_media_bay(struct macio_dev *bay);
#else
-static inline int check_media_bay(struct device_node *which_bay, int what)
+static inline int check_media_bay(struct macio_dev *bay)
{
- return -ENODEV;
+ return MB_NO;
}
+static inline void lock_media_bay(struct macio_dev *bay) { }
+static inline void unlock_media_bay(struct macio_dev *bay) { }
+
#endif
#endif /* __KERNEL__ */
*/
extern int mmu_ci_restrictions;
-#ifdef CONFIG_HUGETLB_PAGE
-/*
- * The page size indexes of the huge pages for use by hugetlbfs
- */
-extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT];
-
-#endif /* CONFIG_HUGETLB_PAGE */
-
/*
* This function sets the AVPN and L fields of the HPTE appropriately
* for the page size
unsigned long vsid, pte_t *ptep, unsigned long trap,
unsigned int local, int ssize);
struct mm_struct;
+unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap);
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
-extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
- unsigned long ea, unsigned long vsid, int local,
- unsigned long trap);
+int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
+ pte_t *ptep, unsigned long trap, int local, int ssize,
+ unsigned int shift, unsigned int mmu_psize);
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+/*
+ * For the sub-page protection option, we extend the PGD with one of
+ * these. Basically we have a 3-level tree, with the top level being
+ * the protptrs array. To optimize speed and memory consumption when
+ * only addresses < 4GB are being protected, pointers to the first
+ * four pages of sub-page protection words are stored in the low_prot
+ * array.
+ * Each page of sub-page protection words protects 1GB (4 bytes
+ * protects 64k). For the 3-level tree, each page of pointers then
+ * protects 8TB.
+ */
+struct subpage_prot_table {
+ unsigned long maxaddr; /* only addresses < this are protected */
+ unsigned int **protptrs[2];
+ unsigned int *low_prot[4];
+};
+
+#define SBP_L1_BITS (PAGE_SHIFT - 2)
+#define SBP_L2_BITS (PAGE_SHIFT - 3)
+#define SBP_L1_COUNT (1 << SBP_L1_BITS)
+#define SBP_L2_COUNT (1 << SBP_L2_BITS)
+#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS)
+#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS)
+
+extern void subpage_prot_free(struct mm_struct *mm);
+extern void subpage_prot_init_new_context(struct mm_struct *mm);
+#else
+static inline void subpage_prot_free(struct mm_struct *mm) {}
+static inline void subpage_prot_init_new_context(struct mm_struct *mm) { }
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
+
typedef unsigned long mm_context_id_t;
typedef struct {
u16 sllp; /* SLB page size encoding */
#endif
unsigned long vdso_base;
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+ struct subpage_prot_table spt;
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
} mm_context_t;
extern void set_context(unsigned long id, pgd_t *pgd);
#ifdef CONFIG_PPC_BOOK3S_64
+extern int __init_new_context(void);
+extern void __destroy_context(int context_id);
static inline void mmu_context_init(void) { }
#else
extern void mmu_context_init(void);
extern unsigned int mpc52xx_get_xtal_freq(struct device_node *node);
extern void mpc52xx_restart(char *cmd);
+/* mpc52xx_gpt.c */
+struct mpc52xx_gpt_priv;
+extern struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq);
+extern int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period,
+ int continuous);
+extern u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt);
+extern int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt);
+
+/* mpc52xx_lpbfifo.c */
+#define MPC52XX_LPBFIFO_FLAG_READ (0)
+#define MPC52XX_LPBFIFO_FLAG_WRITE (1<<0)
+#define MPC52XX_LPBFIFO_FLAG_NO_INCREMENT (1<<1)
+#define MPC52XX_LPBFIFO_FLAG_NO_DMA (1<<2)
+#define MPC52XX_LPBFIFO_FLAG_POLL_DMA (1<<3)
+
+struct mpc52xx_lpbfifo_request {
+ struct list_head list;
+
+ /* localplus bus address */
+ unsigned int cs;
+ size_t offset;
+
+ /* Memory address */
+ void *data;
+ phys_addr_t data_phys;
+
+ /* Details of transfer */
+ size_t size;
+ size_t pos; /* current position of transfer */
+ int flags;
+
+ /* What to do when finished */
+ void (*callback)(struct mpc52xx_lpbfifo_request *);
+
+ void *priv; /* Driver private data */
+
+ /* statistics */
+ int irq_count;
+ int irq_ticks;
+ u8 last_byte;
+ int buffer_not_done_cnt;
+};
+
+extern int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req);
+extern void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req);
+extern void mpc52xx_lpbfifo_poll(void);
+
/* mpc52xx_pic.c */
extern void mpc52xx_init_irq(void);
extern unsigned int mpc52xx_get_irq(void);
extern int nvram_read_error_log(char * buff, int length,
unsigned int * err_type, unsigned int *err_seq);
extern int nvram_clear_error_log(void);
-extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
extern int pSeries_nvram_init(void);
#ifdef CONFIG_PPC_PSERIES
extern int pSeries_reconfig_notifier_register(struct notifier_block *);
extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
+extern struct blocking_notifier_head pSeries_reconfig_chain;
#else /* !CONFIG_PPC_PSERIES */
static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
{
u64 system_time; /* accumulated system TB ticks */
u64 startpurr; /* PURR/TB value snapshot */
u64 startspurr; /* SPURR value snapshot */
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+ struct {
+ u64 esid;
+ u64 vsid;
+ } kvm_slb[64]; /* guest SLB */
+ u8 kvm_slb_max; /* highest used guest slb entry */
+ u8 kvm_in_guest; /* are we inside the guest? */
+#endif
};
extern struct paca_struct paca[];
#endif
+typedef struct { signed long pd; } hugepd_t;
+#define HUGEPD_SHIFT_MASK 0x3f
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline int hugepd_ok(hugepd_t hpd)
+{
+ return (hpd.pd > 0);
+}
+
+#define is_hugepd(pdep) (hugepd_ok(*((hugepd_t *)(pdep))))
+#else /* CONFIG_HUGETLB_PAGE */
+#define is_hugepd(pdep) 0
+#endif /* CONFIG_HUGETLB_PAGE */
+
struct page;
extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long vaddr,
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
-#define HUGE_MAX_HSTATE 3
+#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1)
#endif /* __ASSEMBLY__ */
#include <linux/threads.h>
-#define PTE_NONCACHE_NUM 0 /* dummy for now to share code w/ppc64 */
+/* For 32-bit, all levels of page tables are just drawn from get_free_page() */
+#define MAX_PGTABLE_INDEX_SIZE 0
extern void __bad_pte(pmd_t *pmd);
extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
-static inline void pgtable_free(pgtable_free_t pgf)
+static inline void pgtable_free(void *table, unsigned index_size)
{
- void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
-
- free_page((unsigned long)p);
+ BUG_ON(index_size); /* 32-bit doesn't use this */
+ free_page((unsigned long)table);
}
#define check_pgt_cache() do { } while (0)
#include <linux/cpumask.h>
#include <linux/percpu.h>
-#ifndef CONFIG_PPC_SUBPAGE_PROT
-static inline void subpage_prot_free(pgd_t *pgd) {}
-#endif
+/*
+ * Functions that deal with pagetables that could be at any level of
+ * the table need to be passed an "index_size" so they know how to
+ * handle allocation. For PTE pages (which are linked to a struct
+ * page for now, and drawn from the main get_free_pages() pool), the
+ * allocation size will be (2^index_size * sizeof(pointer)) and
+ * allocations are drawn from the kmem_cache in PGT_CACHE(index_size).
+ *
+ * The maximum index size needs to be big enough to allow any
+ * pagetable sizes we need, but small enough to fit in the low bits of
+ * any page table pointer. In other words all pagetables, even tiny
+ * ones, must be aligned to allow at least enough low 0 bits to
+ * contain this value. This value is also used as a mask, so it must
+ * be one less than a power of two.
+ */
+#define MAX_PGTABLE_INDEX_SIZE 0xf
extern struct kmem_cache *pgtable_cache[];
-
-#define PGD_CACHE_NUM 0
-#define PUD_CACHE_NUM 1
-#define PMD_CACHE_NUM 1
-#define HUGEPTE_CACHE_NUM 2
-#define PTE_NONCACHE_NUM 7 /* from GFP rather than kmem_cache */
+#define PGT_CACHE(shift) (pgtable_cache[(shift)-1])
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
- return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
+ return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), GFP_KERNEL);
}
static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
- subpage_prot_free(pgd);
- kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
+ kmem_cache_free(PGT_CACHE(PGD_INDEX_SIZE), pgd);
}
#ifndef CONFIG_PPC_64K_PAGES
static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
+ return kmem_cache_alloc(PGT_CACHE(PUD_INDEX_SIZE),
GFP_KERNEL|__GFP_REPEAT);
}
static inline void pud_free(struct mm_struct *mm, pud_t *pud)
{
- kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
+ kmem_cache_free(PGT_CACHE(PUD_INDEX_SIZE), pud);
}
static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
+ return kmem_cache_alloc(PGT_CACHE(PMD_INDEX_SIZE),
GFP_KERNEL|__GFP_REPEAT);
}
static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
{
- kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
+ kmem_cache_free(PGT_CACHE(PMD_INDEX_SIZE), pmd);
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
return page;
}
-static inline void pgtable_free(pgtable_free_t pgf)
+static inline void pgtable_free(void *table, unsigned index_size)
{
- void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
- int cachenum = pgf.val & PGF_CACHENUM_MASK;
-
- if (cachenum == PTE_NONCACHE_NUM)
- free_page((unsigned long)p);
- else
- kmem_cache_free(pgtable_cache[cachenum], p);
+ if (!index_size)
+ free_page((unsigned long)table);
+ else {
+ BUG_ON(index_size > MAX_PGTABLE_INDEX_SIZE);
+ kmem_cache_free(PGT_CACHE(index_size), table);
+ }
}
-#define __pmd_free_tlb(tlb, pmd,addr) \
- pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
- PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
+#define __pmd_free_tlb(tlb, pmd, addr) \
+ pgtable_free_tlb(tlb, pmd, PMD_INDEX_SIZE)
#ifndef CONFIG_PPC_64K_PAGES
#define __pud_free_tlb(tlb, pud, addr) \
- pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
- PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
+ pgtable_free_tlb(tlb, pud, PUD_INDEX_SIZE)
+
#endif /* CONFIG_PPC_64K_PAGES */
#define check_pgt_cache() do { } while (0)
__free_page(ptepage);
}
-typedef struct pgtable_free {
- unsigned long val;
-} pgtable_free_t;
-
-/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored
- * and small enough to fit in the low bits of any naturally aligned page
- * table cache entry. Arbitrarily set to 0x1f, that should give us some
- * room to grow
- */
-#define PGF_CACHENUM_MASK 0x1f
-
-static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
- unsigned long mask)
-{
- BUG_ON(cachenum > PGF_CACHENUM_MASK);
-
- return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
-}
-
#ifdef CONFIG_PPC64
#include <asm/pgalloc-64.h>
#else
#endif
#ifdef CONFIG_SMP
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift);
extern void pte_free_finish(void);
#else /* CONFIG_SMP */
-static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
{
- pgtable_free(pgf);
+ pgtable_free(table, shift);
}
static inline void pte_free_finish(void) { }
#endif /* !CONFIG_SMP */
static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage,
unsigned long address)
{
- pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage),
- PTE_NONCACHE_NUM,
- PTE_TABLE_SIZE-1);
tlb_flush_pgtable(tlb, address);
pgtable_page_dtor(ptepage);
- pgtable_free_tlb(tlb, pgf);
+ pgtable_free_tlb(tlb, page_address(ptepage), 0);
}
#endif /* __KERNEL__ */
#define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT)
+void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
void pgtable_cache_init(void);
/*
return pt;
}
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+#ifdef CONFIG_HUGETLB_PAGE
+pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
+ unsigned *shift);
+#else
+static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
+ unsigned *shift)
+{
+ if (shift)
+ *shift = 0;
+ return find_linux_pte(pgdir, ea);
+}
+#endif /* !CONFIG_HUGETLB_PAGE */
#endif /* __ASSEMBLY__ */
*/
extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, unsigned long addr,
+ unsigned long end, int write, struct page **pages, int *nr);
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
#define _PAGE_SPECIAL 0x0008 /* SW entry, forced to 0 by the TLB miss */
+#define _PAGE_DIRTY 0x0100 /* C: page changed */
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
+/* These 4 software bits must be masked out when the entry is loaded
+ * into the TLB, 1 SW bit left(0x0080).
*/
#define _PAGE_GUARDED 0x0010 /* software: guarded access */
-#define _PAGE_DIRTY 0x0020 /* software: page changed */
-#define _PAGE_RW 0x0040 /* software: user write access allowed */
-#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
+#define _PAGE_ACCESSED 0x0020 /* software: page referenced */
+#define _PAGE_WRITETHRU 0x0040 /* software: caching is write through */
/* Setting any bits in the nibble with the follow two controls will
* require a TLB exception handler change. It is assumed unused bits
* are always zero.
*/
-#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
+#define _PAGE_RW 0x0400 /* lsb PP bits, inverted in HW */
+#define _PAGE_USER 0x0800 /* msb PP bits */
#define _PMD_PRESENT 0x0001
#define _PMD_BAD 0x0ff0
remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
-
-#ifdef CONFIG_PPC_SUBPAGE_PROT
-/*
- * For the sub-page protection option, we extend the PGD with one of
- * these. Basically we have a 3-level tree, with the top level being
- * the protptrs array. To optimize speed and memory consumption when
- * only addresses < 4GB are being protected, pointers to the first
- * four pages of sub-page protection words are stored in the low_prot
- * array.
- * Each page of sub-page protection words protects 1GB (4 bytes
- * protects 64k). For the 3-level tree, each page of pointers then
- * protects 8TB.
- */
-struct subpage_prot_table {
- unsigned long maxaddr; /* only addresses < this are protected */
- unsigned int **protptrs[2];
- unsigned int *low_prot[4];
-};
-
-#undef PGD_TABLE_SIZE
-#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \
- sizeof(struct subpage_prot_table))
-
-#define SBP_L1_BITS (PAGE_SHIFT - 2)
-#define SBP_L2_BITS (PAGE_SHIFT - 3)
-#define SBP_L1_COUNT (1 << SBP_L1_BITS)
-#define SBP_L2_COUNT (1 << SBP_L2_BITS)
-#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS)
-#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS)
-
-extern void subpage_prot_free(pgd_t *pgd);
-
-static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
-{
- return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD);
-}
-#endif /* CONFIG_PPC_SUBPAGE_PROT */
#endif /* __ASSEMBLY__ */
/* Export QE common operations */
#ifdef CONFIG_QUICC_ENGINE
-extern void __init qe_reset(void);
+extern void qe_reset(void);
#else
static inline void qe_reset(void) {}
#endif
static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
#endif /* CONFIG_QE_GPIO */
-/* QE internal API */
+#ifdef CONFIG_QUICC_ENGINE
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+#else
+static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
+ u32 cmd_input)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* QE internal API */
enum qe_clock qe_clock_source(const char *source);
unsigned int qe_get_brg_clk(void);
int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
void qe_put_snum(u8 snum);
unsigned int qe_get_num_of_risc(void);
unsigned int qe_get_num_of_snums(void);
-int qe_alive_during_sleep(void);
+
+static inline int qe_alive_during_sleep(void)
+{
+ /*
+ * MPC8568E reference manual says:
+ *
+ * "...power down sequence waits for all I/O interfaces to become idle.
+ * In some applications this may happen eventually without actively
+ * shutting down interfaces, but most likely, software will have to
+ * take steps to shut down the eTSEC, QUICC Engine Block, and PCI
+ * interfaces before issuing the command (either the write to the core
+ * MSR[WE] as described above or writing to POWMGTCSR) to put the
+ * device into sleep state."
+ *
+ * MPC8569E reference manual has a similar paragraph.
+ */
+#ifdef CONFIG_PPC_85xx
+ return 0;
+#else
+ return 1;
+#endif
+}
/* we actually use cpm_muram implementation, define this for convenience */
#define qe_muram_init cpm_muram_init
u64 extended_modes; /* Extended modes */
};
+#ifdef CONFIG_QUICC_ENGINE
/* Upload a firmware to the QE */
int qe_upload_firmware(const struct qe_firmware *firmware);
+#else
+static inline int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
/* Obtain information on the uploaded firmware */
struct qe_firmware_info *qe_get_firmware_info(void);
SYSCALL_SPU(setfsgid)
SYSCALL_SPU(llseek)
COMPAT_SYS_SPU(getdents)
-SYSX_SPU(sys_select,ppc32_select,ppc_select)
+SYSX_SPU(sys_select,ppc32_select,sys_select)
SYSCALL_SPU(flock)
SYSCALL_SPU(msync)
COMPAT_SYS_SPU(readv)
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK) += clock.o
-procfs-$(CONFIG_PPC64) := proc_ppc64.o
+procfs-y := proc_powerpc.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y)
+obj-$(CONFIG_PPC_RTAS_DAEMON) += rtasd.o
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+ DEFINE(PACA_KVM_IN_GUEST, offsetof(struct paca_struct, kvm_in_guest));
+ DEFINE(PACA_KVM_SLB, offsetof(struct paca_struct, kvm_slb));
+ DEFINE(PACA_KVM_SLB_MAX, offsetof(struct paca_struct, kvm_slb_max));
+#endif
#endif /* CONFIG_PPC64 */
/* RTAS */
DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
+
+ /* book3s_64 */
+#ifdef CONFIG_PPC64
+ DEFINE(VCPU_FAULT_DSISR, offsetof(struct kvm_vcpu, arch.fault_dsisr));
+ DEFINE(VCPU_HOST_RETIP, offsetof(struct kvm_vcpu, arch.host_retip));
+ DEFINE(VCPU_HOST_R2, offsetof(struct kvm_vcpu, arch.host_r2));
+ DEFINE(VCPU_HOST_MSR, offsetof(struct kvm_vcpu, arch.host_msr));
+ DEFINE(VCPU_SHADOW_MSR, offsetof(struct kvm_vcpu, arch.shadow_msr));
+ DEFINE(VCPU_TRAMPOLINE_LOWMEM, offsetof(struct kvm_vcpu, arch.trampoline_lowmem));
+ DEFINE(VCPU_TRAMPOLINE_ENTER, offsetof(struct kvm_vcpu, arch.trampoline_enter));
+ DEFINE(VCPU_HIGHMEM_HANDLER, offsetof(struct kvm_vcpu, arch.highmem_handler));
+ DEFINE(VCPU_HFLAGS, offsetof(struct kvm_vcpu, arch.hflags));
+#endif
#endif
#ifdef CONFIG_44x
DEFINE(PGD_T_LOG2, PGD_T_LOG2);
DEFINE(PTE_T_LOG2, PTE_T_LOG2);
#endif
-#ifdef CONFIG_FSL_BOOKE
- DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
-#endif
#ifdef CONFIG_KVM_EXIT_TIMING
DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
hard_irq_disable();
for_each_irq(i) {
- struct irq_desc *desc = irq_desc + i;
+ struct irq_desc *desc = irq_to_desc(i);
if (desc->status & IRQ_INPROGRESS)
desc->chip->eoi(i);
#include <asm/dma.h>
#include <asm/abs_addr.h>
-int swiotlb __read_mostly;
unsigned int ppc_swiotlb_enable;
/*
. = 0x200
_machine_check_pSeries:
HMT_MEDIUM
+ DO_KVM 0x200
mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
.globl data_access_pSeries
data_access_pSeries:
HMT_MEDIUM
+ DO_KVM 0x300
mtspr SPRN_SPRG_SCRATCH0,r13
BEGIN_FTR_SECTION
mfspr r13,SPRN_SPRG_PACA
.globl data_access_slb_pSeries
data_access_slb_pSeries:
HMT_MEDIUM
+ DO_KVM 0x380
mtspr SPRN_SPRG_SCRATCH0,r13
mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
.globl instruction_access_slb_pSeries
instruction_access_slb_pSeries:
HMT_MEDIUM
+ DO_KVM 0x480
mtspr SPRN_SPRG_SCRATCH0,r13
mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
.globl system_call_pSeries
system_call_pSeries:
HMT_MEDIUM
+ DO_KVM 0xc00
BEGIN_FTR_SECTION
cmpdi r0,0x1ebe
beq- 1f
*/
performance_monitor_pSeries_1:
. = 0xf00
+ DO_KVM 0xf00
b performance_monitor_pSeries
altivec_unavailable_pSeries_1:
. = 0xf20
+ DO_KVM 0xf20
b altivec_unavailable_pSeries
vsx_unavailable_pSeries_1:
. = 0xf40
+ DO_KVM 0xf40
b vsx_unavailable_pSeries
#ifdef CONFIG_CBE_RAS
#include <asm/firmware.h>
#include <asm/page_64.h>
#include <asm/irqflags.h>
+#include <asm/kvm_book3s_64_asm.h>
/* The physical memory is layed out such that the secondary processor
* spin code sits at 0x0000...0x00ff. On server, the vectors follow
#include "exceptions-64s.S"
#endif
+/* KVM trampoline code needs to be close to the interrupt handlers */
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+#include "../kvm/book3s_64_rmhandlers.S"
+#endif
+
_GLOBAL(generic_secondary_thread_init)
mr r24,r3
EXCEPTION_PROLOG
mfspr r4,SPRN_DAR
stw r4,_DAR(r11)
+ li r5,0x00f0
+ mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */
mfspr r5,SPRN_DSISR
stw r5,_DSISR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
stw r10,_DSISR(r11)
mr r5,r10
mfspr r4,SPRN_DAR
+ li r10,0x00f0
+ mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */
EXC_XFER_EE_LITE(0x300, handle_page_fault)
/* Instruction access exception.
EXCEPTION_PROLOG
mfspr r4,SPRN_DAR
stw r4,_DAR(r11)
+ li r5,0x00f0
+ mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */
mfspr r5,SPRN_DSISR
stw r5,_DSISR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
-#ifdef CONFIG_SWAP
- /* do not set the _PAGE_ACCESSED bit of a non-present page */
- andi. r11, r10, _PAGE_PRESENT
- beq 4f
- ori r10, r10, _PAGE_ACCESSED
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
- stw r10, 0(r11)
-4:
-#else
- ori r10, r10, _PAGE_ACCESSED
- stw r10, 0(r11)
-#endif
+ andi. r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
+ cmpwi cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
+ bne- cr0, 2f
+
+ /* Clear PP lsb, 0x400 */
+ rlwinm r10, r10, 0, 22, 20
/* The Linux PTE won't go exactly into the MMU TLB.
- * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 22 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.
*/
-2: li r11, 0x00f0
+ li r11, 0x00f0
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
DO_8xx_CPU6(0x2d80, r3)
mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
lwz r3, 8(r0)
#endif
rfi
+2:
+ mfspr r11, SPRN_SRR1
+ /* clear all error bits as TLB Miss
+ * sets a few unconditionally
+ */
+ rlwinm r11, r11, 0, 0xffff
+ mtspr SPRN_SRR1, r11
+
+ mfspr r10, SPRN_M_TW /* Restore registers */
+ lwz r11, 0(r0)
+ mtcr r11
+ lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0)
+#endif
+ b InstructionAccess
. = 0x1200
DataStoreTLBMiss:
* above.
*/
rlwimi r11, r10, 0, 27, 27
+ /* Insert the WriteThru flag into the TWC from the Linux PTE.
+ * It is bit 25 in the Linux PTE and bit 30 in the TWC
+ */
+ rlwimi r11, r10, 32-5, 30, 30
DO_8xx_CPU6(0x3b80, r3)
mtspr SPRN_MD_TWC, r11
-#ifdef CONFIG_SWAP
- /* do not set the _PAGE_ACCESSED bit of a non-present page */
- andi. r11, r10, _PAGE_PRESENT
- beq 4f
- ori r10, r10, _PAGE_ACCESSED
-4:
- /* and update pte in table */
-#else
- ori r10, r10, _PAGE_ACCESSED
-#endif
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
- stw r10, 0(r11)
+ /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
+ * We also need to know if the insn is a load/store, so:
+ * Clear _PAGE_PRESENT and load that which will
+ * trap into DTLB Error with store bit set accordinly.
+ */
+ /* PRESENT=0x1, ACCESSED=0x20
+ * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
+ * r10 = (r10 & ~PRESENT) | r11;
+ */
+ rlwinm r11, r10, 32-5, _PAGE_PRESENT
+ and r11, r11, r10
+ rlwimi r10, r11, 0, _PAGE_PRESENT
+
+ /* Honour kernel RO, User NA */
+ /* 0x200 == Extended encoding, bit 22 */
+ /* r11 = (r10 & _PAGE_USER) >> 2 */
+ rlwinm r11, r10, 32-2, 0x200
+ or r10, r11, r10
+ /* r11 = (r10 & _PAGE_RW) >> 1 */
+ rlwinm r11, r10, 32-1, 0x200
+ or r10, r11, r10
+ /* invert RW and 0x200 bits */
+ xori r10, r10, _PAGE_RW | 0x200
/* The Linux PTE won't go exactly into the MMU TLB.
- * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 22 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.
*/
2: li r11, 0x00f0
+ mtspr SPRN_DAR,r11 /* Tag DAR */
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
DO_8xx_CPU6(0x3d80, r3)
mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
stw r10, 0(r0)
stw r11, 4(r0)
- /* First, make sure this was a store operation.
- */
- mfspr r10, SPRN_DSISR
- andis. r11, r10, 0x0200 /* If set, indicates store op */
- beq 2f
-
- /* The EA of a data TLB miss is automatically stored in the MD_EPN
- * register. The EA of a data TLB error is automatically stored in
- * the DAR, but not the MD_EPN register. We must copy the 20 most
- * significant bits of the EA from the DAR to MD_EPN before we
- * start walking the page tables. We also need to copy the CASID
- * value from the M_CASID register.
- * Addendum: The EA of a data TLB error is _supposed_ to be stored
- * in DAR, but it seems that this doesn't happen in some cases, such
- * as when the error is due to a dcbi instruction to a page with a
- * TLB that doesn't have the changed bit set. In such cases, there
- * does not appear to be any way to recover the EA of the error
- * since it is neither in DAR nor MD_EPN. As a workaround, the
- * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
- * are initialized in mapin_ram(). This will avoid the problem,
- * assuming we only use the dcbi instruction on kernel addresses.
- */
mfspr r10, SPRN_DAR
- rlwinm r11, r10, 0, 0, 19
- ori r11, r11, MD_EVALID
- mfspr r10, SPRN_M_CASID
- rlwimi r11, r10, 0, 28, 31
- DO_8xx_CPU6(0x3780, r3)
- mtspr SPRN_MD_EPN, r11
-
- mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- andi. r11, r10, 0x0800
- beq 3f
- lis r11, swapper_pg_dir@h
- ori r11, r11, swapper_pg_dir@l
- rlwimi r10, r11, 0, 2, 19
-3:
- lwz r11, 0(r10) /* Get the level 1 entry */
- rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
- beq 2f /* If zero, bail */
-
- /* We have a pte table, so fetch the pte from the table.
- */
- ori r11, r11, 1 /* Set valid bit in physical L2 page */
- DO_8xx_CPU6(0x3b80, r3)
- mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
- mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
- lwz r10, 0(r11) /* Get the pte */
-
- andi. r11, r10, _PAGE_RW /* Is it writeable? */
- beq 2f /* Bail out if not */
-
- /* Update 'changed', among others.
- */
-#ifdef CONFIG_SWAP
- ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
- /* do not set the _PAGE_ACCESSED bit of a non-present page */
- andi. r11, r10, _PAGE_PRESENT
- beq 4f
- ori r10, r10, _PAGE_ACCESSED
-4:
-#else
- ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-#endif
- mfspr r11, SPRN_MD_TWC /* Get pte address again */
- stw r10, 0(r11) /* and update pte in table */
-
- /* The Linux PTE won't go exactly into the MMU TLB.
- * Software indicator bits 21, 22 and 28 must be clear.
- * Software indicator bits 24, 25, 26, and 27 must be
- * set. All other Linux PTE bits control the behavior
- * of the MMU.
- */
- li r11, 0x00f0
- rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
- DO_8xx_CPU6(0x3d80, r3)
- mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
-
- mfspr r10, SPRN_M_TW /* Restore registers */
- lwz r11, 0(r0)
- mtcr r11
- lwz r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
- lwz r3, 8(r0)
-#endif
- rfi
-2:
+ cmpwi cr0, r10, 0x00f0
+ beq- FixupDAR /* must be a buggy dcbX, icbi insn. */
+DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR */
mfspr r10, SPRN_M_TW /* Restore registers */
lwz r11, 0(r0)
mtcr r11
. = 0x2000
+/* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions
+ * by decoding the registers used by the dcbx instruction and adding them.
+ * DAR is set to the calculated address and r10 also holds the EA on exit.
+ */
+ /* define if you don't want to use self modifying code */
+#define NO_SELF_MODIFYING_CODE
+FixupDAR:/* Entry point for dcbx workaround. */
+ /* fetch instruction from memory. */
+ mfspr r10, SPRN_SRR0
+ DO_8xx_CPU6(0x3780, r3)
+ mtspr SPRN_MD_EPN, r10
+ mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */
+ cmplwi cr0, r11, 0x0800
+ blt- 3f /* Branch if user space */
+ lis r11, (swapper_pg_dir-PAGE_OFFSET)@h
+ ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
+ rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */
+3: lwz r11, 0(r11) /* Get the level 1 entry */
+ DO_8xx_CPU6(0x3b80, r3)
+ mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
+ mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
+ lwz r11, 0(r11) /* Get the pte */
+ /* concat physical page address(r11) and page offset(r10) */
+ rlwimi r11, r10, 0, 20, 31
+ lwz r11,0(r11)
+/* Check if it really is a dcbx instruction. */
+/* dcbt and dcbtst does not generate DTLB Misses/Errors,
+ * no need to include them here */
+ srwi r10, r11, 26 /* check if major OP code is 31 */
+ cmpwi cr0, r10, 31
+ bne- 141f
+ rlwinm r10, r11, 0, 21, 30
+ cmpwi cr0, r10, 2028 /* Is dcbz? */
+ beq+ 142f
+ cmpwi cr0, r10, 940 /* Is dcbi? */
+ beq+ 142f
+ cmpwi cr0, r10, 108 /* Is dcbst? */
+ beq+ 144f /* Fix up store bit! */
+ cmpwi cr0, r10, 172 /* Is dcbf? */
+ beq+ 142f
+ cmpwi cr0, r10, 1964 /* Is icbi? */
+ beq+ 142f
+141: mfspr r10, SPRN_DAR /* r10 must hold DAR at exit */
+ b DARFixed /* Nope, go back to normal TLB processing */
+
+144: mfspr r10, SPRN_DSISR
+ rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */
+ mtspr SPRN_DSISR, r10
+142: /* continue, it was a dcbx, dcbi instruction. */
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0) /* restore r3 from memory */
+#endif
+#ifndef NO_SELF_MODIFYING_CODE
+ andis. r10,r11,0x1f /* test if reg RA is r0 */
+ li r10,modified_instr@l
+ dcbtst r0,r10 /* touch for store */
+ rlwinm r11,r11,0,0,20 /* Zero lower 10 bits */
+ oris r11,r11,640 /* Transform instr. to a "add r10,RA,RB" */
+ ori r11,r11,532
+ stw r11,0(r10) /* store add/and instruction */
+ dcbf 0,r10 /* flush new instr. to memory. */
+ icbi 0,r10 /* invalidate instr. cache line */
+ lwz r11, 4(r0) /* restore r11 from memory */
+ mfspr r10, SPRN_M_TW /* restore r10 from M_TW */
+ isync /* Wait until new instr is loaded from memory */
+modified_instr:
+ .space 4 /* this is where the add instr. is stored */
+ bne+ 143f
+ subf r10,r0,r10 /* r10=r10-r0, only if reg RA is r0 */
+143: mtdar r10 /* store faulting EA in DAR */
+ b DARFixed /* Go back to normal TLB handling */
+#else
+ mfctr r10
+ mtdar r10 /* save ctr reg in DAR */
+ rlwinm r10, r11, 24, 24, 28 /* offset into jump table for reg RB */
+ addi r10, r10, 150f@l /* add start of table */
+ mtctr r10 /* load ctr with jump address */
+ xor r10, r10, r10 /* sum starts at zero */
+ bctr /* jump into table */
+150:
+ add r10, r10, r0 ;b 151f
+ add r10, r10, r1 ;b 151f
+ add r10, r10, r2 ;b 151f
+ add r10, r10, r3 ;b 151f
+ add r10, r10, r4 ;b 151f
+ add r10, r10, r5 ;b 151f
+ add r10, r10, r6 ;b 151f
+ add r10, r10, r7 ;b 151f
+ add r10, r10, r8 ;b 151f
+ add r10, r10, r9 ;b 151f
+ mtctr r11 ;b 154f /* r10 needs special handling */
+ mtctr r11 ;b 153f /* r11 needs special handling */
+ add r10, r10, r12 ;b 151f
+ add r10, r10, r13 ;b 151f
+ add r10, r10, r14 ;b 151f
+ add r10, r10, r15 ;b 151f
+ add r10, r10, r16 ;b 151f
+ add r10, r10, r17 ;b 151f
+ add r10, r10, r18 ;b 151f
+ add r10, r10, r19 ;b 151f
+ add r10, r10, r20 ;b 151f
+ add r10, r10, r21 ;b 151f
+ add r10, r10, r22 ;b 151f
+ add r10, r10, r23 ;b 151f
+ add r10, r10, r24 ;b 151f
+ add r10, r10, r25 ;b 151f
+ add r10, r10, r26 ;b 151f
+ add r10, r10, r27 ;b 151f
+ add r10, r10, r28 ;b 151f
+ add r10, r10, r29 ;b 151f
+ add r10, r10, r30 ;b 151f
+ add r10, r10, r31
+151:
+ rlwinm. r11,r11,19,24,28 /* offset into jump table for reg RA */
+ beq 152f /* if reg RA is zero, don't add it */
+ addi r11, r11, 150b@l /* add start of table */
+ mtctr r11 /* load ctr with jump address */
+ rlwinm r11,r11,0,16,10 /* make sure we don't execute this more than once */
+ bctr /* jump into table */
+152:
+ mfdar r11
+ mtctr r11 /* restore ctr reg from DAR */
+ mtdar r10 /* save fault EA to DAR */
+ b DARFixed /* Go back to normal TLB handling */
+
+ /* special handling for r10,r11 since these are modified already */
+153: lwz r11, 4(r0) /* load r11 from memory */
+ b 155f
+154: mfspr r11, SPRN_M_TW /* load r10 from M_TW */
+155: add r10, r10, r11 /* add it */
+ mfctr r11 /* restore r11 */
+ b 151b
+#endif
+
.globl giveup_fpu
giveup_fpu:
blr
sync
blr
-/*
- * extern void loadcam_entry(unsigned int index)
- *
- * Load TLBCAM[index] entry in to the L2 CAM MMU
- */
-_GLOBAL(loadcam_entry)
- lis r4,TLBCAM@ha
- addi r4,r4,TLBCAM@l
- mulli r5,r3,TLBCAM_SIZE
- add r3,r5,r4
- lwz r4,0(r3)
- mtspr SPRN_MAS0,r4
- lwz r4,4(r3)
- mtspr SPRN_MAS1,r4
- lwz r4,8(r3)
- mtspr SPRN_MAS2,r4
- lwz r4,12(r3)
- mtspr SPRN_MAS3,r4
- tlbwe
- isync
- blr
-
/*
* extern void giveup_altivec(struct task_struct *prev)
*
dest++;
n--;
}
- while(n > 4) {
+ while(n >= 4) {
*((u32 *)dest) = *((volatile u32 *)vsrc);
eieio();
vsrc += 4;
vdest++;
n--;
}
- while(n > 4) {
+ while(n >= 4) {
*((volatile u32 *)vdest) = *((volatile u32 *)src);
src += 4;
vdest += 4;
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
+
+#ifndef CONFIG_SPARSE_IRQ
EXPORT_SYMBOL(irq_desc);
+#endif
int distribute_irqs = 1;
for_each_online_cpu(j)
seq_printf(p, "CPU%d ", j);
seq_putc(p, '\n');
- }
-
- if (i < NR_IRQS) {
- desc = get_irq_desc(i);
- spin_lock_irqsave(&desc->lock, flags);
- action = desc->action;
- if (!action || !action->handler)
- goto skip;
- seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-#else
- seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
- if (desc->chip)
- seq_printf(p, " %s ", desc->chip->typename);
- else
- seq_puts(p, " None ");
- seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge ");
- seq_printf(p, " %s", action->name);
- for (action = action->next; action; action = action->next)
- seq_printf(p, ", %s", action->name);
- seq_putc(p, '\n');
-skip:
- spin_unlock_irqrestore(&desc->lock, flags);
- } else if (i == NR_IRQS) {
+ } else if (i == nr_irqs) {
#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
if (tau_initialized){
seq_puts(p, "TAU: ");
}
#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
+
+ return 0;
}
+
+ desc = irq_to_desc(i);
+ if (!desc)
+ return 0;
+
+ spin_lock_irqsave(&desc->lock, flags);
+
+ action = desc->action;
+ if (!action || !action->handler)
+ goto skip;
+
+ seq_printf(p, "%3d: ", i);
+#ifdef CONFIG_SMP
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+#else
+ seq_printf(p, "%10u ", kstat_irqs(i));
+#endif /* CONFIG_SMP */
+
+ if (desc->chip)
+ seq_printf(p, " %s ", desc->chip->name);
+ else
+ seq_puts(p, " None ");
+
+ seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge ");
+ seq_printf(p, " %s", action->name);
+
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+ seq_putc(p, '\n');
+
+skip:
+ spin_unlock_irqrestore(&desc->lock, flags);
+
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(cpumask_t map)
{
+ struct irq_desc *desc;
unsigned int irq;
static int warned;
for_each_irq(irq) {
cpumask_t mask;
- if (irq_desc[irq].status & IRQ_PER_CPU)
+ desc = irq_to_desc(irq);
+ if (desc && desc->status & IRQ_PER_CPU)
continue;
- cpumask_and(&mask, irq_desc[irq].affinity, &map);
+ cpumask_and(&mask, desc->affinity, &map);
if (any_online_cpu(mask) == NR_CPUS) {
printk("Breaking affinity for irq %i\n", irq);
mask = map;
}
- if (irq_desc[irq].chip->set_affinity)
- irq_desc[irq].chip->set_affinity(irq, &mask);
- else if (irq_desc[irq].action && !(warned++))
+ if (desc->chip->set_affinity)
+ desc->chip->set_affinity(irq, &mask);
+ else if (desc->action && !(warned++))
printk("Cannot set affinity for irq %i\n", irq);
}
return;
}
- desc = irq_desc + irq;
+ desc = irq_to_desc(irq);
saved_sp_limit = current->thread.ksp_limit;
irqtp->task = curtp->task;
smp_wmb();
/* Clear norequest flags */
- get_irq_desc(i)->status &= ~IRQ_NOREQUEST;
+ irq_to_desc(i)->status &= ~IRQ_NOREQUEST;
/* Legacy flags are left to default at this point,
* one can then use irq_create_mapping() to
static int irq_setup_virq(struct irq_host *host, unsigned int virq,
irq_hw_number_t hwirq)
{
+ struct irq_desc *desc;
+
+ desc = irq_to_desc_alloc_node(virq, 0);
+ if (!desc) {
+ pr_debug("irq: -> allocating desc failed\n");
+ goto error;
+ }
+
/* Clear IRQ_NOREQUEST flag */
- get_irq_desc(virq)->status &= ~IRQ_NOREQUEST;
+ desc->status &= ~IRQ_NOREQUEST;
/* map it */
smp_wmb();
if (host->ops->map(host, virq, hwirq)) {
pr_debug("irq: -> mapping failed, freeing\n");
- irq_free_virt(virq, 1);
- return -1;
+ goto error;
}
return 0;
+
+error:
+ irq_free_virt(virq, 1);
+ return -1;
}
unsigned int irq_create_direct_mapping(struct irq_host *host)
EXPORT_SYMBOL_GPL(irq_create_mapping);
unsigned int irq_create_of_mapping(struct device_node *controller,
- u32 *intspec, unsigned int intsize)
+ const u32 *intspec, unsigned int intsize)
{
struct irq_host *host;
irq_hw_number_t hwirq;
/* Set type if specified and different than the current one */
if (type != IRQ_TYPE_NONE &&
- type != (get_irq_desc(virq)->status & IRQF_TRIGGER_MASK))
+ type != (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK))
set_irq_type(virq, type);
return virq;
}
irq_map[virq].hwirq = host->inval_irq;
/* Set some flags */
- get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+ irq_to_desc(virq)->status |= IRQ_NOREQUEST;
/* Free it */
irq_free_virt(virq, 1);
spin_unlock_irqrestore(&irq_big_lock, flags);
}
-void irq_early_init(void)
+int arch_early_irq_init(void)
{
- unsigned int i;
+ struct irq_desc *desc;
+ int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ desc = irq_to_desc(i);
+ if (desc)
+ desc->status |= IRQ_NOREQUEST;
+ }
- for (i = 0; i < NR_IRQS; i++)
- get_irq_desc(i)->status |= IRQ_NOREQUEST;
+ return 0;
+}
+
+int arch_init_chip_data(struct irq_desc *desc, int node)
+{
+ desc->status |= IRQ_NOREQUEST;
+ return 0;
}
/* We need to create the radix trees late */
seq_printf(m, "%-5s %-7s %-15s %s\n", "virq", "hwirq",
"chip name", "host name");
- for (i = 1; i < NR_IRQS; i++) {
- desc = get_irq_desc(i);
+ for (i = 1; i < nr_irqs; i++) {
+ desc = irq_to_desc(i);
+ if (!desc)
+ continue;
+
spin_lock_irqsave(&desc->lock, flags);
if (desc->action && desc->action->handler) {
seq_printf(m, "%5d ", i);
seq_printf(m, "0x%05lx ", virq_to_hw(i));
- if (desc->chip && desc->chip->typename)
- p = desc->chip->typename;
+ if (desc->chip && desc->chip->name)
+ p = desc->chip->name;
else
p = none;
seq_printf(m, "%-15s ", p);
!firmware_has_feature(FW_FEATURE_ISERIES))
mode |= S_IWUSR;
- ent = proc_create("ppc64/lparcfg", mode, NULL, &lparcfg_fops);
+ ent = proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_fops);
if (!ent) {
- printk(KERN_ERR "Failed to create ppc64/lparcfg\n");
+ printk(KERN_ERR "Failed to create powerpc/lparcfg\n");
return -EIO;
}
li r0,PAGE_SIZE/L1_CACHE_BYTES
slw r0,r0,r4
mtctr r0
-#ifdef CONFIG_8xx
- li r4, 0
-1: stw r4, 0(r3)
- stw r4, 4(r3)
- stw r4, 8(r3)
- stw r4, 12(r3)
-#else
1: dcbz 0,r3
-#endif
addi r3,r3,L1_CACHE_BYTES
bdnz 1b
blr
addi r3,r3,-4
addi r4,r4,-4
-#ifdef CONFIG_8xx
- /* don't use prefetch on 8xx */
- li r0,4096/L1_CACHE_BYTES
- mtctr r0
-1: COPY_16_BYTES
- bdnz 1b
- blr
-
-#else /* not 8xx, we can prefetch */
li r5,4
#if MAX_COPY_PREFETCH > 1
li r0,MAX_COPY_PREFETCH
li r11,4
b 2b
-#endif /* CONFIG_8xx */
/*
* void atomic_clear_mask(atomic_t mask, atomic_t *addr)
}
-static int dev_nvram_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long dev_nvram_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
switch(cmd) {
#ifdef CONFIG_PPC_PMAC
}
const struct file_operations nvram_fops = {
- .owner = THIS_MODULE,
- .llseek = dev_nvram_llseek,
- .read = dev_nvram_read,
- .write = dev_nvram_write,
- .ioctl = dev_nvram_ioctl,
+ .owner = THIS_MODULE,
+ .llseek = dev_nvram_llseek,
+ .read = dev_nvram_read,
+ .write = dev_nvram_write,
+ .unlocked_ioctl = dev_nvram_ioctl,
};
static struct miscdevice nvram_dev = {
#ifdef DEBUG_NVRAM
-static void nvram_print_partitions(char * label)
+static void __init nvram_print_partitions(char * label)
{
struct list_head * p;
struct nvram_partition * tmp_part;
#endif
-static int nvram_write_header(struct nvram_partition * part)
+static int __init nvram_write_header(struct nvram_partition * part)
{
loff_t tmp_index;
int rc;
}
-static unsigned char nvram_checksum(struct nvram_header *p)
+static unsigned char __init nvram_checksum(struct nvram_header *p)
{
unsigned int c_sum, c_sum2;
unsigned short *sp = (unsigned short *)p->name; /* assume 6 shorts */
return c_sum;
}
-
-/*
- * Find an nvram partition, sig can be 0 for any
- * partition or name can be NULL for any name, else
- * tries to match both
- */
-struct nvram_partition *nvram_find_partition(int sig, const char *name)
-{
- struct nvram_partition * part;
- struct list_head * p;
-
- list_for_each(p, &nvram_part->partition) {
- part = list_entry(p, struct nvram_partition, partition);
-
- if (sig && part->header.signature != sig)
- continue;
- if (name && 0 != strncmp(name, part->header.name, 12))
- continue;
- return part;
- }
- return NULL;
-}
-EXPORT_SYMBOL(nvram_find_partition);
-
-
-static int nvram_remove_os_partition(void)
+static int __init nvram_remove_os_partition(void)
{
struct list_head *i;
struct list_head *j;
* Will create a partition starting at the first free
* space found if space has enough room.
*/
-static int nvram_create_os_partition(void)
+static int __init nvram_create_os_partition(void)
{
struct nvram_partition *part;
struct nvram_partition *new_part;
* 5.) If the max chunk cannot be allocated then try finding a chunk
* that will satisfy the minum needed (NVRAM_MIN_REQ).
*/
-static int nvram_setup_partition(void)
+static int __init nvram_setup_partition(void)
{
struct list_head * p;
struct nvram_partition * part;
}
-static int nvram_scan_partitions(void)
+static int __init nvram_scan_partitions(void)
{
loff_t cur_index = 0;
struct nvram_header phead;
int clear_word = ERR_FLAG_ALREADY_LOGGED;
int rc;
+ if (nvram_error_log_index == -1)
+ return -1;
+
tmp_index = nvram_error_log_index;
rc = ppc_md.nvram_write((char *)&clear_word, sizeof(int), &tmp_index);
}
#ifdef CONFIG_PPC64
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define is_huge_psize(pagesize) (HPAGE_SHIFT && mmu_huge_psizes[pagesize])
-#else
-#define is_huge_psize(pagesize) 0
-#endif
-
/*
* On 64-bit we don't want to invoke hash_page on user addresses from
* interrupt context, so if the access faults, we read the page tables
{
pgd_t *pgdir;
pte_t *ptep, pte;
- int pagesize;
+ unsigned shift;
unsigned long addr = (unsigned long) ptr;
unsigned long offset;
unsigned long pfn;
if (!pgdir)
return -EFAULT;
- pagesize = get_slice_psize(current->mm, addr);
+ ptep = find_linux_pte_or_hugepte(pgdir, addr, &shift);
+ if (!shift)
+ shift = PAGE_SHIFT;
/* align address to page boundary */
- offset = addr & ((1ul << mmu_psize_defs[pagesize].shift) - 1);
+ offset = addr & ((1UL << shift) - 1);
addr -= offset;
- if (is_huge_psize(pagesize))
- ptep = huge_pte_offset(current->mm, addr);
- else
- ptep = find_linux_pte(pgdir, addr);
-
if (ptep == NULL)
return -EFAULT;
pte = *ptep;
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
EXPORT_SYMBOL(pci_dram_offset);
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
#endif /* CONFIG_PCI */
EXPORT_SYMBOL(start_thread);
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(timer_interrupt);
-EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
EXPORT_SYMBOL(cacheable_memcpy);
EXPORT_SYMBOL(cacheable_memzero);
#include <asm/uaccess.h>
#include <asm/prom.h>
-static loff_t page_map_seek( struct file *file, loff_t off, int whence);
-static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes,
- loff_t *ppos);
-static int page_map_mmap( struct file *file, struct vm_area_struct *vma );
-
-static const struct file_operations page_map_fops = {
- .llseek = page_map_seek,
- .read = page_map_read,
- .mmap = page_map_mmap
-};
-
-/*
- * Create the ppc64 and ppc64/rtas directories early. This allows us to
- * assume that they have been previously created in drivers.
- */
-static int __init proc_ppc64_create(void)
-{
- struct proc_dir_entry *root;
-
- root = proc_mkdir("ppc64", NULL);
- if (!root)
- return 1;
-
- if (!of_find_node_by_path("/rtas"))
- return 0;
-
- if (!proc_mkdir("rtas", root))
- return 1;
-
- if (!proc_symlink("rtas", NULL, "ppc64/rtas"))
- return 1;
-
- return 0;
-}
-core_initcall(proc_ppc64_create);
-
-static int __init proc_ppc64_init(void)
-{
- struct proc_dir_entry *pde;
-
- pde = proc_create_data("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL,
- &page_map_fops, vdso_data);
- if (!pde)
- return 1;
- pde->size = PAGE_SIZE;
-
- return 0;
-}
-__initcall(proc_ppc64_init);
+#ifdef CONFIG_PPC64
static loff_t page_map_seek( struct file *file, loff_t off, int whence)
{
return 0;
}
+static const struct file_operations page_map_fops = {
+ .llseek = page_map_seek,
+ .read = page_map_read,
+ .mmap = page_map_mmap
+};
+
+
+static int __init proc_ppc64_init(void)
+{
+ struct proc_dir_entry *pde;
+
+ pde = proc_create_data("powerpc/systemcfg", S_IFREG|S_IRUGO, NULL,
+ &page_map_fops, vdso_data);
+ if (!pde)
+ return 1;
+ pde->size = PAGE_SIZE;
+
+ return 0;
+}
+__initcall(proc_ppc64_init);
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * Create the ppc64 and ppc64/rtas directories early. This allows us to
+ * assume that they have been previously created in drivers.
+ */
+static int __init proc_ppc64_create(void)
+{
+ struct proc_dir_entry *root;
+
+ root = proc_mkdir("powerpc", NULL);
+ if (!root)
+ return 1;
+
+#ifdef CONFIG_PPC64
+ if (!proc_symlink("ppc64", NULL, "powerpc"))
+ pr_err("Failed to create link /proc/ppc64 -> /proc/powerpc\n");
+#endif
+
+ if (!of_find_node_by_path("/rtas"))
+ return 0;
+
+ if (!proc_mkdir("rtas", root))
+ return 1;
+
+ if (!proc_symlink("rtas", NULL, "powerpc/rtas"))
+ return 1;
+
+ return 0;
+}
+core_initcall(proc_ppc64_create);
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * /proc/ppc64/rtas/firmware_flash interface
+ * /proc/powerpc/rtas/firmware_flash interface
*
* This file implements a firmware_flash interface to pump a firmware
* image into the kernel. At reboot time rtas_restart() will see the
return 1;
}
- firmware_flash_pde = create_flash_pde("ppc64/rtas/"
+ firmware_flash_pde = create_flash_pde("powerpc/rtas/"
FIRMWARE_FLASH_NAME,
&rtas_flash_operations);
if (firmware_flash_pde == NULL) {
if (rc != 0)
goto cleanup;
- firmware_update_pde = create_flash_pde("ppc64/rtas/"
+ firmware_update_pde = create_flash_pde("powerpc/rtas/"
FIRMWARE_UPDATE_NAME,
&rtas_flash_operations);
if (firmware_update_pde == NULL) {
if (rc != 0)
goto cleanup;
- validate_pde = create_flash_pde("ppc64/rtas/" VALIDATE_FLASH_NAME,
+ validate_pde = create_flash_pde("powerpc/rtas/" VALIDATE_FLASH_NAME,
&validate_flash_operations);
if (validate_pde == NULL) {
rc = -ENOMEM;
if (rc != 0)
goto cleanup;
- manage_pde = create_flash_pde("ppc64/rtas/" MANAGE_FLASH_NAME,
+ manage_pde = create_flash_pde("powerpc/rtas/" MANAGE_FLASH_NAME,
&manage_flash_operations);
if (manage_pde == NULL) {
rc = -ENOMEM;
static unsigned long rtas_log_size;
static int surveillance_timeout = -1;
+
static unsigned int rtas_error_log_max;
static unsigned int rtas_error_log_buffer_max;
return;
}
+#ifdef CONFIG_PPC64
/* Write error to NVRAM */
if (logging_enabled && !(err_type & ERR_FLAG_BOOT))
nvram_write_error_log(buf, len, err_type, error_log_cnt);
+#endif /* CONFIG_PPC64 */
/*
* rtas errors can occur during boot, and we do want to capture
}
-
static int rtas_log_open(struct inode * inode, struct file * file)
{
return 0;
return -ENOMEM;
spin_lock_irqsave(&rtasd_log_lock, s);
+
/* if it's 0, then we know we got the last one (the one in NVRAM) */
while (rtas_log_size == 0) {
if (file->f_flags & O_NONBLOCK) {
error = -ENODATA;
goto out;
}
+#ifdef CONFIG_PPC64
nvram_clear_error_log();
+#endif /* CONFIG_PPC64 */
spin_unlock_irqrestore(&rtasd_log_lock, s);
error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
put_online_cpus();
}
-static void start_event_scan(void)
+#ifdef CONFIG_PPC64
+static void retreive_nvram_error_log(void)
{
- unsigned int err_type;
- int rc;
-
- printk(KERN_DEBUG "RTAS daemon started\n");
- pr_debug("rtasd: will sleep for %d milliseconds\n",
- (30000 / rtas_event_scan_rate));
+ unsigned int err_type ;
+ int rc ;
/* See if we have any error stored in NVRAM */
memset(logdata, 0, rtas_error_log_max);
&err_type, &error_log_cnt);
/* We can use rtas_log_buf now */
logging_enabled = 1;
-
if (!rc) {
if (err_type != ERR_FLAG_ALREADY_LOGGED) {
pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0);
}
}
+}
+#else /* CONFIG_PPC64 */
+static void retreive_nvram_error_log(void)
+{
+}
+#endif /* CONFIG_PPC64 */
+
+static void start_event_scan(void)
+{
+ printk(KERN_DEBUG "RTAS daemon started\n");
+ pr_debug("rtasd: will sleep for %d milliseconds\n",
+ (30000 / rtas_event_scan_rate));
+
+ /* Retreive errors from nvram if any */
+ retreive_nvram_error_log();
schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
event_scan_delay);
{
struct proc_dir_entry *entry;
- if (!machine_is(pseries))
+ if (!machine_is(pseries) && !machine_is(chrp))
return 0;
/* No RTAS */
event_scan = rtas_token("event-scan");
if (event_scan == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_DEBUG "rtasd: no event-scan on system\n");
+ printk(KERN_INFO "rtasd: No event-scan on system\n");
return -ENODEV;
}
return -ENOMEM;
}
- entry = proc_create("ppc64/rtas/error_log", S_IRUSR, NULL,
+ entry = proc_create("powerpc/rtas/error_log", S_IRUSR, NULL,
&proc_rtas_log_operations);
if (!entry)
printk(KERN_ERR "Failed to create error_log proc entry\n");
return 0;
}
+__initcall(rtas_init);
static int __init surveillance_setup(char *str)
{
int i;
+ /* We only do surveillance on pseries */
+ if (!machine_is(pseries))
+ return 0;
+
if (get_option(&str,&i)) {
if (i >= 0 && i <= 255)
surveillance_timeout = i;
return 1;
}
+__setup("surveillance=", surveillance_setup);
static int __init rtasmsgs_setup(char *str)
{
return 1;
}
-__initcall(rtas_init);
-__setup("surveillance=", surveillance_setup);
__setup("rtasmsgs=", rtasmsgs_setup);
*/
initialize_cache_info();
- /*
- * Initialize irq remapping subsystem
- */
- irq_early_init();
-
#ifdef CONFIG_PPC_RTAS
/*
* Initialize RTAS if available
static void stop_this_cpu(void *dummy)
{
+ /* Remove this CPU */
+ set_cpu_online(smp_processor_id(), false);
+
local_irq_disable();
while (1)
;
cacheinfo_cpu_offline(cpu);
}
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+ssize_t arch_cpu_probe(const char *buf, size_t count)
+{
+ if (ppc_md.cpu_probe)
+ return ppc_md.cpu_probe(buf, count);
+
+ return -EINVAL;
+}
+
+ssize_t arch_cpu_release(const char *buf, size_t count)
+{
+ if (ppc_md.cpu_release)
+ return ppc_md.cpu_release(buf, count);
+
+ return -EINVAL;
+}
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
#endif /* CONFIG_HOTPLUG_CPU */
static int __cpuinit sysfs_cpu_notify(struct notifier_block *self,
per_cpu(cputime_scaled_last_delta, smp_processor_id()) = deltascaled;
local_irq_restore(flags);
}
+EXPORT_SYMBOL_GPL(account_system_vtime);
/*
* Transfer the user and system times accumulated in the paca
info.si_code = code;
info.si_addr = (void __user *) addr;
force_sig_info(signr, &info, current);
-
- /*
- * Init gets no signals that it doesn't have a handler for.
- * That's all very well, but if it has caused a synchronous
- * exception and we ignore the resulting signal, it will just
- * generate the same exception over and over again and we get
- * nowhere. Better to kill it and let the kernel panic.
- */
- if (is_global_init(current)) {
- __sighandler_t handler;
-
- spin_lock_irq(¤t->sighand->siglock);
- handler = current->sighand->action[signr-1].sa.sa_handler;
- spin_unlock_irq(¤t->sighand->siglock);
- if (handler == SIG_DFL) {
- /* init has generated a synchronous exception
- and it doesn't have a handler for the signal */
- printk(KERN_CRIT "init has generated signal %d "
- "but has no handler for it\n", signr);
- do_exit(signr);
- }
- }
}
#ifdef CONFIG_PPC64
* all 1's
*/
mfspr r4,SPRN_VRSAVE
- cmpdi 0,r4,0
+ cmpwi 0,r4,0
bne+ 1f
li r4,-1
mtspr SPRN_VRSAVE,r4
select PREEMPT_NOTIFIERS
select ANON_INODES
+config KVM_BOOK3S_64_HANDLER
+ bool
+
+config KVM_BOOK3S_64
+ tristate "KVM support for PowerPC book3s_64 processors"
+ depends on EXPERIMENTAL && PPC64
+ select KVM
+ select KVM_BOOK3S_64_HANDLER
+ ---help---
+ Support running unmodified book3s_64 and book3s_32 guest kernels
+ in virtual machines on book3s_64 host processors.
+
+ This module provides access to the hardware capabilities through
+ a character device node named /dev/kvm.
+
+ If unsure, say N.
+
config KVM_440
bool "KVM support for PowerPC 440 processors"
depends on EXPERIMENTAL && 44x
CFLAGS_e500_tlb.o := -I.
CFLAGS_emulate.o := -I.
-kvm-objs := $(common-objs-y) powerpc.o emulate.o
+common-objs-y += powerpc.o emulate.o
obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
-obj-$(CONFIG_KVM) += kvm.o
+obj-$(CONFIG_KVM_BOOK3S_64_HANDLER) += book3s_64_exports.o
AFLAGS_booke_interrupts.o := -I$(obj)
kvm-440-objs := \
+ $(common-objs-y) \
booke.o \
booke_emulate.o \
booke_interrupts.o \
44x.o \
44x_tlb.o \
44x_emulate.o
-obj-$(CONFIG_KVM_440) += kvm-440.o
+kvm-objs-$(CONFIG_KVM_440) := $(kvm-440-objs)
kvm-e500-objs := \
+ $(common-objs-y) \
booke.o \
booke_emulate.o \
booke_interrupts.o \
e500.o \
e500_tlb.o \
e500_emulate.o
-obj-$(CONFIG_KVM_E500) += kvm-e500.o
+kvm-objs-$(CONFIG_KVM_E500) := $(kvm-e500-objs)
+
+kvm-book3s_64-objs := \
+ $(common-objs-y) \
+ book3s.o \
+ book3s_64_emulate.o \
+ book3s_64_interrupts.o \
+ book3s_64_mmu_host.o \
+ book3s_64_mmu.o \
+ book3s_32_mmu.o
+kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-objs)
+
+kvm-objs := $(kvm-objs-m) $(kvm-objs-y)
+
+obj-$(CONFIG_KVM_440) += kvm.o
+obj-$(CONFIG_KVM_E500) += kvm.o
+obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o
+
--- /dev/null
+/*
+ * Copyright (C) 2009. SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ * Alexander Graf <agraf@suse.de>
+ * Kevin Wolf <mail@kevin-wolf.de>
+ *
+ * Description:
+ * This file is derived from arch/powerpc/kvm/44x.c,
+ * by Hollis Blanchard <hollisb@us.ibm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/err.h>
+
+#include <asm/reg.h>
+#include <asm/cputable.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu_context.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+
+#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
+
+/* #define EXIT_DEBUG */
+/* #define EXIT_DEBUG_SIMPLE */
+
+/* Without AGGRESSIVE_DEC we only fire off a DEC interrupt when DEC turns 0.
+ * When set, we retrigger a DEC interrupt after that if DEC <= 0.
+ * PPC32 Linux runs faster without AGGRESSIVE_DEC, PPC64 Linux requires it. */
+
+/* #define AGGRESSIVE_DEC */
+
+struct kvm_stats_debugfs_item debugfs_entries[] = {
+ { "exits", VCPU_STAT(sum_exits) },
+ { "mmio", VCPU_STAT(mmio_exits) },
+ { "sig", VCPU_STAT(signal_exits) },
+ { "sysc", VCPU_STAT(syscall_exits) },
+ { "inst_emu", VCPU_STAT(emulated_inst_exits) },
+ { "dec", VCPU_STAT(dec_exits) },
+ { "ext_intr", VCPU_STAT(ext_intr_exits) },
+ { "queue_intr", VCPU_STAT(queue_intr) },
+ { "halt_wakeup", VCPU_STAT(halt_wakeup) },
+ { "pf_storage", VCPU_STAT(pf_storage) },
+ { "sp_storage", VCPU_STAT(sp_storage) },
+ { "pf_instruc", VCPU_STAT(pf_instruc) },
+ { "sp_instruc", VCPU_STAT(sp_instruc) },
+ { "ld", VCPU_STAT(ld) },
+ { "ld_slow", VCPU_STAT(ld_slow) },
+ { "st", VCPU_STAT(st) },
+ { "st_slow", VCPU_STAT(st_slow) },
+ { NULL }
+};
+
+void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
+ memcpy(get_paca()->kvm_slb, to_book3s(vcpu)->slb_shadow, sizeof(get_paca()->kvm_slb));
+ get_paca()->kvm_slb_max = to_book3s(vcpu)->slb_shadow_max;
+}
+
+void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu)
+{
+ memcpy(to_book3s(vcpu)->slb_shadow, get_paca()->kvm_slb, sizeof(get_paca()->kvm_slb));
+ to_book3s(vcpu)->slb_shadow_max = get_paca()->kvm_slb_max;
+}
+
+#if defined(AGGRESSIVE_DEC) || defined(EXIT_DEBUG)
+static u32 kvmppc_get_dec(struct kvm_vcpu *vcpu)
+{
+ u64 jd = mftb() - vcpu->arch.dec_jiffies;
+ return vcpu->arch.dec - jd;
+}
+#endif
+
+void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
+{
+ ulong old_msr = vcpu->arch.msr;
+
+#ifdef EXIT_DEBUG
+ printk(KERN_INFO "KVM: Set MSR to 0x%llx\n", msr);
+#endif
+ msr &= to_book3s(vcpu)->msr_mask;
+ vcpu->arch.msr = msr;
+ vcpu->arch.shadow_msr = msr | MSR_USER32;
+ vcpu->arch.shadow_msr &= ( MSR_VEC | MSR_VSX | MSR_FP | MSR_FE0 |
+ MSR_USER64 | MSR_SE | MSR_BE | MSR_DE |
+ MSR_FE1);
+
+ if (msr & (MSR_WE|MSR_POW)) {
+ if (!vcpu->arch.pending_exceptions) {
+ kvm_vcpu_block(vcpu);
+ vcpu->stat.halt_wakeup++;
+ }
+ }
+
+ if (((vcpu->arch.msr & (MSR_IR|MSR_DR)) != (old_msr & (MSR_IR|MSR_DR))) ||
+ (vcpu->arch.msr & MSR_PR) != (old_msr & MSR_PR)) {
+ kvmppc_mmu_flush_segments(vcpu);
+ kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+ }
+}
+
+void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags)
+{
+ vcpu->arch.srr0 = vcpu->arch.pc;
+ vcpu->arch.srr1 = vcpu->arch.msr | flags;
+ vcpu->arch.pc = to_book3s(vcpu)->hior + vec;
+ vcpu->arch.mmu.reset_msr(vcpu);
+}
+
+void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec)
+{
+ unsigned int prio;
+
+ vcpu->stat.queue_intr++;
+ switch (vec) {
+ case 0x100: prio = BOOK3S_IRQPRIO_SYSTEM_RESET; break;
+ case 0x200: prio = BOOK3S_IRQPRIO_MACHINE_CHECK; break;
+ case 0x300: prio = BOOK3S_IRQPRIO_DATA_STORAGE; break;
+ case 0x380: prio = BOOK3S_IRQPRIO_DATA_SEGMENT; break;
+ case 0x400: prio = BOOK3S_IRQPRIO_INST_STORAGE; break;
+ case 0x480: prio = BOOK3S_IRQPRIO_INST_SEGMENT; break;
+ case 0x500: prio = BOOK3S_IRQPRIO_EXTERNAL; break;
+ case 0x600: prio = BOOK3S_IRQPRIO_ALIGNMENT; break;
+ case 0x700: prio = BOOK3S_IRQPRIO_PROGRAM; break;
+ case 0x800: prio = BOOK3S_IRQPRIO_FP_UNAVAIL; break;
+ case 0x900: prio = BOOK3S_IRQPRIO_DECREMENTER; break;
+ case 0xc00: prio = BOOK3S_IRQPRIO_SYSCALL; break;
+ case 0xd00: prio = BOOK3S_IRQPRIO_DEBUG; break;
+ case 0xf20: prio = BOOK3S_IRQPRIO_ALTIVEC; break;
+ case 0xf40: prio = BOOK3S_IRQPRIO_VSX; break;
+ default: prio = BOOK3S_IRQPRIO_MAX; break;
+ }
+
+ set_bit(prio, &vcpu->arch.pending_exceptions);
+#ifdef EXIT_DEBUG
+ printk(KERN_INFO "Queueing interrupt %x\n", vec);
+#endif
+}
+
+
+void kvmppc_core_queue_program(struct kvm_vcpu *vcpu)
+{
+ kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_PROGRAM);
+}
+
+void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu)
+{
+ kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_DECREMENTER);
+}
+
+int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu)
+{
+ return test_bit(BOOK3S_INTERRUPT_DECREMENTER >> 7, &vcpu->arch.pending_exceptions);
+}
+
+void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
+ struct kvm_interrupt *irq)
+{
+ kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
+}
+
+int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
+{
+ int deliver = 1;
+ int vec = 0;
+
+ switch (priority) {
+ case BOOK3S_IRQPRIO_DECREMENTER:
+ deliver = vcpu->arch.msr & MSR_EE;
+ vec = BOOK3S_INTERRUPT_DECREMENTER;
+ break;
+ case BOOK3S_IRQPRIO_EXTERNAL:
+ deliver = vcpu->arch.msr & MSR_EE;
+ vec = BOOK3S_INTERRUPT_EXTERNAL;
+ break;
+ case BOOK3S_IRQPRIO_SYSTEM_RESET:
+ vec = BOOK3S_INTERRUPT_SYSTEM_RESET;
+ break;
+ case BOOK3S_IRQPRIO_MACHINE_CHECK:
+ vec = BOOK3S_INTERRUPT_MACHINE_CHECK;
+ break;
+ case BOOK3S_IRQPRIO_DATA_STORAGE:
+ vec = BOOK3S_INTERRUPT_DATA_STORAGE;
+ break;
+ case BOOK3S_IRQPRIO_INST_STORAGE:
+ vec = BOOK3S_INTERRUPT_INST_STORAGE;
+ break;
+ case BOOK3S_IRQPRIO_DATA_SEGMENT:
+ vec = BOOK3S_INTERRUPT_DATA_SEGMENT;
+ break;
+ case BOOK3S_IRQPRIO_INST_SEGMENT:
+ vec = BOOK3S_INTERRUPT_INST_SEGMENT;
+ break;
+ case BOOK3S_IRQPRIO_ALIGNMENT:
+ vec = BOOK3S_INTERRUPT_ALIGNMENT;
+ break;
+ case BOOK3S_IRQPRIO_PROGRAM:
+ vec = BOOK3S_INTERRUPT_PROGRAM;
+ break;
+ case BOOK3S_IRQPRIO_VSX:
+ vec = BOOK3S_INTERRUPT_VSX;
+ break;
+ case BOOK3S_IRQPRIO_ALTIVEC:
+ vec = BOOK3S_INTERRUPT_ALTIVEC;
+ break;
+ case BOOK3S_IRQPRIO_FP_UNAVAIL:
+ vec = BOOK3S_INTERRUPT_FP_UNAVAIL;
+ break;
+ case BOOK3S_IRQPRIO_SYSCALL:
+ vec = BOOK3S_INTERRUPT_SYSCALL;
+ break;
+ case BOOK3S_IRQPRIO_DEBUG:
+ vec = BOOK3S_INTERRUPT_TRACE;
+ break;
+ case BOOK3S_IRQPRIO_PERFORMANCE_MONITOR:
+ vec = BOOK3S_INTERRUPT_PERFMON;
+ break;
+ default:
+ deliver = 0;
+ printk(KERN_ERR "KVM: Unknown interrupt: 0x%x\n", priority);
+ break;
+ }
+
+#if 0
+ printk(KERN_INFO "Deliver interrupt 0x%x? %x\n", vec, deliver);
+#endif
+
+ if (deliver)
+ kvmppc_inject_interrupt(vcpu, vec, 0ULL);
+
+ return deliver;
+}
+
+void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu)
+{
+ unsigned long *pending = &vcpu->arch.pending_exceptions;
+ unsigned int priority;
+
+ /* XXX be more clever here - no need to mftb() on every entry */
+ /* Issue DEC again if it's still active */
+#ifdef AGGRESSIVE_DEC
+ if (vcpu->arch.msr & MSR_EE)
+ if (kvmppc_get_dec(vcpu) & 0x80000000)
+ kvmppc_core_queue_dec(vcpu);
+#endif
+
+#ifdef EXIT_DEBUG
+ if (vcpu->arch.pending_exceptions)
+ printk(KERN_EMERG "KVM: Check pending: %lx\n", vcpu->arch.pending_exceptions);
+#endif
+ priority = __ffs(*pending);
+ while (priority <= (sizeof(unsigned int) * 8)) {
+ if (kvmppc_book3s_irqprio_deliver(vcpu, priority)) {
+ clear_bit(priority, &vcpu->arch.pending_exceptions);
+ break;
+ }
+
+ priority = find_next_bit(pending,
+ BITS_PER_BYTE * sizeof(*pending),
+ priority + 1);
+ }
+}
+
+void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
+{
+ vcpu->arch.hflags &= ~BOOK3S_HFLAG_SLB;
+ vcpu->arch.pvr = pvr;
+ if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
+ kvmppc_mmu_book3s_64_init(vcpu);
+ to_book3s(vcpu)->hior = 0xfff00000;
+ to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
+ } else {
+ kvmppc_mmu_book3s_32_init(vcpu);
+ to_book3s(vcpu)->hior = 0;
+ to_book3s(vcpu)->msr_mask = 0xffffffffULL;
+ }
+
+ /* If we are in hypervisor level on 970, we can tell the CPU to
+ * treat DCBZ as 32 bytes store */
+ vcpu->arch.hflags &= ~BOOK3S_HFLAG_DCBZ32;
+ if (vcpu->arch.mmu.is_dcbz32(vcpu) && (mfmsr() & MSR_HV) &&
+ !strcmp(cur_cpu_spec->platform, "ppc970"))
+ vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+
+}
+
+/* Book3s_32 CPUs always have 32 bytes cache line size, which Linux assumes. To
+ * make Book3s_32 Linux work on Book3s_64, we have to make sure we trap dcbz to
+ * emulate 32 bytes dcbz length.
+ *
+ * The Book3s_64 inventors also realized this case and implemented a special bit
+ * in the HID5 register, which is a hypervisor ressource. Thus we can't use it.
+ *
+ * My approach here is to patch the dcbz instruction on executing pages.
+ */
+static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
+{
+ bool touched = false;
+ hva_t hpage;
+ u32 *page;
+ int i;
+
+ hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+ if (kvm_is_error_hva(hpage))
+ return;
+
+ hpage |= pte->raddr & ~PAGE_MASK;
+ hpage &= ~0xFFFULL;
+
+ page = vmalloc(HW_PAGE_SIZE);
+
+ if (copy_from_user(page, (void __user *)hpage, HW_PAGE_SIZE))
+ goto out;
+
+ for (i=0; i < HW_PAGE_SIZE / 4; i++)
+ if ((page[i] & 0xff0007ff) == INS_DCBZ) {
+ page[i] &= 0xfffffff7; // reserved instruction, so we trap
+ touched = true;
+ }
+
+ if (touched)
+ copy_to_user((void __user *)hpage, page, HW_PAGE_SIZE);
+
+out:
+ vfree(page);
+}
+
+static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
+ struct kvmppc_pte *pte)
+{
+ int relocated = (vcpu->arch.msr & (data ? MSR_DR : MSR_IR));
+ int r;
+
+ if (relocated) {
+ r = vcpu->arch.mmu.xlate(vcpu, eaddr, pte, data);
+ } else {
+ pte->eaddr = eaddr;
+ pte->raddr = eaddr & 0xffffffff;
+ pte->vpage = eaddr >> 12;
+ switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+ case 0:
+ pte->vpage |= VSID_REAL;
+ case MSR_DR:
+ pte->vpage |= VSID_REAL_DR;
+ case MSR_IR:
+ pte->vpage |= VSID_REAL_IR;
+ }
+ pte->may_read = true;
+ pte->may_write = true;
+ pte->may_execute = true;
+ r = 0;
+ }
+
+ return r;
+}
+
+static hva_t kvmppc_bad_hva(void)
+{
+ return PAGE_OFFSET;
+}
+
+static hva_t kvmppc_pte_to_hva(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte,
+ bool read)
+{
+ hva_t hpage;
+
+ if (read && !pte->may_read)
+ goto err;
+
+ if (!read && !pte->may_write)
+ goto err;
+
+ hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+ if (kvm_is_error_hva(hpage))
+ goto err;
+
+ return hpage | (pte->raddr & ~PAGE_MASK);
+err:
+ return kvmppc_bad_hva();
+}
+
+int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr)
+{
+ struct kvmppc_pte pte;
+ hva_t hva = eaddr;
+
+ vcpu->stat.st++;
+
+ if (kvmppc_xlate(vcpu, eaddr, false, &pte))
+ goto err;
+
+ hva = kvmppc_pte_to_hva(vcpu, &pte, false);
+ if (kvm_is_error_hva(hva))
+ goto err;
+
+ if (copy_to_user((void __user *)hva, ptr, size)) {
+ printk(KERN_INFO "kvmppc_st at 0x%lx failed\n", hva);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ return -ENOENT;
+}
+
+int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr,
+ bool data)
+{
+ struct kvmppc_pte pte;
+ hva_t hva = eaddr;
+
+ vcpu->stat.ld++;
+
+ if (kvmppc_xlate(vcpu, eaddr, data, &pte))
+ goto err;
+
+ hva = kvmppc_pte_to_hva(vcpu, &pte, true);
+ if (kvm_is_error_hva(hva))
+ goto err;
+
+ if (copy_from_user(ptr, (void __user *)hva, size)) {
+ printk(KERN_INFO "kvmppc_ld at 0x%lx failed\n", hva);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ return -ENOENT;
+}
+
+static int kvmppc_visible_gfn(struct kvm_vcpu *vcpu, gfn_t gfn)
+{
+ return kvm_is_visible_gfn(vcpu->kvm, gfn);
+}
+
+int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
+ ulong eaddr, int vec)
+{
+ bool data = (vec == BOOK3S_INTERRUPT_DATA_STORAGE);
+ int r = RESUME_GUEST;
+ int relocated;
+ int page_found = 0;
+ struct kvmppc_pte pte;
+ bool is_mmio = false;
+
+ if ( vec == BOOK3S_INTERRUPT_DATA_STORAGE ) {
+ relocated = (vcpu->arch.msr & MSR_DR);
+ } else {
+ relocated = (vcpu->arch.msr & MSR_IR);
+ }
+
+ /* Resolve real address if translation turned on */
+ if (relocated) {
+ page_found = vcpu->arch.mmu.xlate(vcpu, eaddr, &pte, data);
+ } else {
+ pte.may_execute = true;
+ pte.may_read = true;
+ pte.may_write = true;
+ pte.raddr = eaddr & 0xffffffff;
+ pte.eaddr = eaddr;
+ pte.vpage = eaddr >> 12;
+ switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+ case 0:
+ pte.vpage |= VSID_REAL;
+ case MSR_DR:
+ pte.vpage |= VSID_REAL_DR;
+ case MSR_IR:
+ pte.vpage |= VSID_REAL_IR;
+ }
+ }
+
+ if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+ (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) {
+ /*
+ * If we do the dcbz hack, we have to NX on every execution,
+ * so we can patch the executing code. This renders our guest
+ * NX-less.
+ */
+ pte.may_execute = !data;
+ }
+
+ if (page_found == -ENOENT) {
+ /* Page not found in guest PTE entries */
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
+ vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL);
+ kvmppc_book3s_queue_irqprio(vcpu, vec);
+ } else if (page_found == -EPERM) {
+ /* Storage protection */
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr & ~DSISR_NOHPTE;
+ to_book3s(vcpu)->dsisr |= DSISR_PROTFAULT;
+ vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL);
+ kvmppc_book3s_queue_irqprio(vcpu, vec);
+ } else if (page_found == -EINVAL) {
+ /* Page not found in guest SLB */
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ kvmppc_book3s_queue_irqprio(vcpu, vec + 0x80);
+ } else if (!is_mmio &&
+ kvmppc_visible_gfn(vcpu, pte.raddr >> PAGE_SHIFT)) {
+ /* The guest's PTE is not mapped yet. Map on the host */
+ kvmppc_mmu_map_page(vcpu, &pte);
+ if (data)
+ vcpu->stat.sp_storage++;
+ else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+ (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32)))
+ kvmppc_patch_dcbz(vcpu, &pte);
+ } else {
+ /* MMIO */
+ vcpu->stat.mmio_exits++;
+ vcpu->arch.paddr_accessed = pte.raddr;
+ r = kvmppc_emulate_mmio(run, vcpu);
+ if ( r == RESUME_HOST_NV )
+ r = RESUME_HOST;
+ if ( r == RESUME_GUEST_NV )
+ r = RESUME_GUEST;
+ }
+
+ return r;
+}
+
+int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
+ unsigned int exit_nr)
+{
+ int r = RESUME_HOST;
+
+ vcpu->stat.sum_exits++;
+
+ run->exit_reason = KVM_EXIT_UNKNOWN;
+ run->ready_for_interrupt_injection = 1;
+#ifdef EXIT_DEBUG
+ printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | dec=0x%x | msr=0x%lx\n",
+ exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
+ kvmppc_get_dec(vcpu), vcpu->arch.msr);
+#elif defined (EXIT_DEBUG_SIMPLE)
+ if ((exit_nr != 0x900) && (exit_nr != 0x500))
+ printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | msr=0x%lx\n",
+ exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
+ vcpu->arch.msr);
+#endif
+ kvm_resched(vcpu);
+ switch (exit_nr) {
+ case BOOK3S_INTERRUPT_INST_STORAGE:
+ vcpu->stat.pf_instruc++;
+ /* only care about PTEG not found errors, but leave NX alone */
+ if (vcpu->arch.shadow_msr & 0x40000000) {
+ r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.pc, exit_nr);
+ vcpu->stat.sp_instruc++;
+ } else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+ (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) {
+ /*
+ * XXX If we do the dcbz hack we use the NX bit to flush&patch the page,
+ * so we can't use the NX bit inside the guest. Let's cross our fingers,
+ * that no guest that needs the dcbz hack does NX.
+ */
+ kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+ } else {
+ vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x58000000);
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+ r = RESUME_GUEST;
+ }
+ break;
+ case BOOK3S_INTERRUPT_DATA_STORAGE:
+ vcpu->stat.pf_storage++;
+ /* The only case we need to handle is missing shadow PTEs */
+ if (vcpu->arch.fault_dsisr & DSISR_NOHPTE) {
+ r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.fault_dear, exit_nr);
+ } else {
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ kvmppc_mmu_pte_flush(vcpu, vcpu->arch.dear, ~0xFFFULL);
+ r = RESUME_GUEST;
+ }
+ break;
+ case BOOK3S_INTERRUPT_DATA_SEGMENT:
+ if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.fault_dear) < 0) {
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ kvmppc_book3s_queue_irqprio(vcpu,
+ BOOK3S_INTERRUPT_DATA_SEGMENT);
+ }
+ r = RESUME_GUEST;
+ break;
+ case BOOK3S_INTERRUPT_INST_SEGMENT:
+ if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc) < 0) {
+ kvmppc_book3s_queue_irqprio(vcpu,
+ BOOK3S_INTERRUPT_INST_SEGMENT);
+ }
+ r = RESUME_GUEST;
+ break;
+ /* We're good on these - the host merely wanted to get our attention */
+ case BOOK3S_INTERRUPT_DECREMENTER:
+ vcpu->stat.dec_exits++;
+ r = RESUME_GUEST;
+ break;
+ case BOOK3S_INTERRUPT_EXTERNAL:
+ vcpu->stat.ext_intr_exits++;
+ r = RESUME_GUEST;
+ break;
+ case BOOK3S_INTERRUPT_PROGRAM:
+ {
+ enum emulation_result er;
+
+ if (vcpu->arch.msr & MSR_PR) {
+#ifdef EXIT_DEBUG
+ printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", vcpu->arch.pc, vcpu->arch.last_inst);
+#endif
+ if ((vcpu->arch.last_inst & 0xff0007ff) !=
+ (INS_DCBZ & 0xfffffff7)) {
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+ }
+ }
+
+ vcpu->stat.emulated_inst_exits++;
+ er = kvmppc_emulate_instruction(run, vcpu);
+ switch (er) {
+ case EMULATE_DONE:
+ r = RESUME_GUEST;
+ break;
+ case EMULATE_FAIL:
+ printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n",
+ __func__, vcpu->arch.pc, vcpu->arch.last_inst);
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+ default:
+ BUG();
+ }
+ break;
+ }
+ case BOOK3S_INTERRUPT_SYSCALL:
+#ifdef EXIT_DEBUG
+ printk(KERN_INFO "Syscall Nr %d\n", (int)vcpu->arch.gpr[0]);
+#endif
+ vcpu->stat.syscall_exits++;
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+ case BOOK3S_INTERRUPT_MACHINE_CHECK:
+ case BOOK3S_INTERRUPT_FP_UNAVAIL:
+ case BOOK3S_INTERRUPT_TRACE:
+ case BOOK3S_INTERRUPT_ALTIVEC:
+ case BOOK3S_INTERRUPT_VSX:
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+ default:
+ /* Ugh - bork here! What did we get? */
+ printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n", exit_nr, vcpu->arch.pc, vcpu->arch.shadow_msr);
+ r = RESUME_HOST;
+ BUG();
+ break;
+ }
+
+
+ if (!(r & RESUME_HOST)) {
+ /* To avoid clobbering exit_reason, only check for signals if
+ * we aren't already exiting to userspace for some other
+ * reason. */
+ if (signal_pending(current)) {
+#ifdef EXIT_DEBUG
+ printk(KERN_EMERG "KVM: Going back to host\n");
+#endif
+ vcpu->stat.signal_exits++;
+ run->exit_reason = KVM_EXIT_INTR;
+ r = -EINTR;
+ } else {
+ /* In case an interrupt came in that was triggered
+ * from userspace (like DEC), we need to check what
+ * to inject now! */
+ kvmppc_core_deliver_interrupts(vcpu);
+ }
+ }
+
+#ifdef EXIT_DEBUG
+ printk(KERN_EMERG "KVM exit: vcpu=0x%p pc=0x%lx r=0x%x\n", vcpu, vcpu->arch.pc, r);
+#endif
+
+ return r;
+}
+
+int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
+{
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+ int i;
+
+ regs->pc = vcpu->arch.pc;
+ regs->cr = vcpu->arch.cr;
+ regs->ctr = vcpu->arch.ctr;
+ regs->lr = vcpu->arch.lr;
+ regs->xer = vcpu->arch.xer;
+ regs->msr = vcpu->arch.msr;
+ regs->srr0 = vcpu->arch.srr0;
+ regs->srr1 = vcpu->arch.srr1;
+ regs->pid = vcpu->arch.pid;
+ regs->sprg0 = vcpu->arch.sprg0;
+ regs->sprg1 = vcpu->arch.sprg1;
+ regs->sprg2 = vcpu->arch.sprg2;
+ regs->sprg3 = vcpu->arch.sprg3;
+ regs->sprg5 = vcpu->arch.sprg4;
+ regs->sprg6 = vcpu->arch.sprg5;
+ regs->sprg7 = vcpu->arch.sprg6;
+
+ for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
+ regs->gpr[i] = vcpu->arch.gpr[i];
+
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+ int i;
+
+ vcpu->arch.pc = regs->pc;
+ vcpu->arch.cr = regs->cr;
+ vcpu->arch.ctr = regs->ctr;
+ vcpu->arch.lr = regs->lr;
+ vcpu->arch.xer = regs->xer;
+ kvmppc_set_msr(vcpu, regs->msr);
+ vcpu->arch.srr0 = regs->srr0;
+ vcpu->arch.srr1 = regs->srr1;
+ vcpu->arch.sprg0 = regs->sprg0;
+ vcpu->arch.sprg1 = regs->sprg1;
+ vcpu->arch.sprg2 = regs->sprg2;
+ vcpu->arch.sprg3 = regs->sprg3;
+ vcpu->arch.sprg5 = regs->sprg4;
+ vcpu->arch.sprg6 = regs->sprg5;
+ vcpu->arch.sprg7 = regs->sprg6;
+
+ for (i = 0; i < ARRAY_SIZE(vcpu->arch.gpr); i++)
+ vcpu->arch.gpr[i] = regs->gpr[i];
+
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
+ struct kvm_sregs *sregs)
+{
+ struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+ int i;
+
+ sregs->pvr = vcpu->arch.pvr;
+
+ sregs->u.s.sdr1 = to_book3s(vcpu)->sdr1;
+ if (vcpu->arch.hflags & BOOK3S_HFLAG_SLB) {
+ for (i = 0; i < 64; i++) {
+ sregs->u.s.ppc64.slb[i].slbe = vcpu3s->slb[i].orige | i;
+ sregs->u.s.ppc64.slb[i].slbv = vcpu3s->slb[i].origv;
+ }
+ } else {
+ for (i = 0; i < 16; i++) {
+ sregs->u.s.ppc32.sr[i] = vcpu3s->sr[i].raw;
+ sregs->u.s.ppc32.sr[i] = vcpu3s->sr[i].raw;
+ }
+ for (i = 0; i < 8; i++) {
+ sregs->u.s.ppc32.ibat[i] = vcpu3s->ibat[i].raw;
+ sregs->u.s.ppc32.dbat[i] = vcpu3s->dbat[i].raw;
+ }
+ }
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
+ struct kvm_sregs *sregs)
+{
+ struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+ int i;
+
+ kvmppc_set_pvr(vcpu, sregs->pvr);
+
+ vcpu3s->sdr1 = sregs->u.s.sdr1;
+ if (vcpu->arch.hflags & BOOK3S_HFLAG_SLB) {
+ for (i = 0; i < 64; i++) {
+ vcpu->arch.mmu.slbmte(vcpu, sregs->u.s.ppc64.slb[i].slbv,
+ sregs->u.s.ppc64.slb[i].slbe);
+ }
+ } else {
+ for (i = 0; i < 16; i++) {
+ vcpu->arch.mmu.mtsrin(vcpu, i, sregs->u.s.ppc32.sr[i]);
+ }
+ for (i = 0; i < 8; i++) {
+ kvmppc_set_bat(vcpu, &(vcpu3s->ibat[i]), false,
+ (u32)sregs->u.s.ppc32.ibat[i]);
+ kvmppc_set_bat(vcpu, &(vcpu3s->ibat[i]), true,
+ (u32)(sregs->u.s.ppc32.ibat[i] >> 32));
+ kvmppc_set_bat(vcpu, &(vcpu3s->dbat[i]), false,
+ (u32)sregs->u.s.ppc32.dbat[i]);
+ kvmppc_set_bat(vcpu, &(vcpu3s->dbat[i]), true,
+ (u32)(sregs->u.s.ppc32.dbat[i] >> 32));
+ }
+ }
+
+ /* Flush the MMU after messing with the segments */
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+ return -ENOTSUPP;
+}
+
+int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+ return -ENOTSUPP;
+}
+
+int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
+ struct kvm_translation *tr)
+{
+ return 0;
+}
+
+/*
+ * Get (and clear) the dirty memory log for a memory slot.
+ */
+int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
+ struct kvm_dirty_log *log)
+{
+ struct kvm_memory_slot *memslot;
+ struct kvm_vcpu *vcpu;
+ ulong ga, ga_end;
+ int is_dirty = 0;
+ int r, n;
+
+ down_write(&kvm->slots_lock);
+
+ r = kvm_get_dirty_log(kvm, log, &is_dirty);
+ if (r)
+ goto out;
+
+ /* If nothing is dirty, don't bother messing with page tables. */
+ if (is_dirty) {
+ memslot = &kvm->memslots[log->slot];
+
+ ga = memslot->base_gfn << PAGE_SHIFT;
+ ga_end = ga + (memslot->npages << PAGE_SHIFT);
+
+ kvm_for_each_vcpu(n, vcpu, kvm)
+ kvmppc_mmu_pte_pflush(vcpu, ga, ga_end);
+
+ n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ memset(memslot->dirty_bitmap, 0, n);
+ }
+
+ r = 0;
+out:
+ up_write(&kvm->slots_lock);
+ return r;
+}
+
+int kvmppc_core_check_processor_compat(void)
+{
+ return 0;
+}
+
+struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s;
+ struct kvm_vcpu *vcpu;
+ int err;
+
+ vcpu_book3s = (struct kvmppc_vcpu_book3s *)__get_free_pages( GFP_KERNEL | __GFP_ZERO,
+ get_order(sizeof(struct kvmppc_vcpu_book3s)));
+ if (!vcpu_book3s) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ vcpu = &vcpu_book3s->vcpu;
+ err = kvm_vcpu_init(vcpu, kvm, id);
+ if (err)
+ goto free_vcpu;
+
+ vcpu->arch.host_retip = kvm_return_point;
+ vcpu->arch.host_msr = mfmsr();
+ /* default to book3s_64 (970fx) */
+ vcpu->arch.pvr = 0x3C0301;
+ kvmppc_set_pvr(vcpu, vcpu->arch.pvr);
+ vcpu_book3s->slb_nr = 64;
+
+ /* remember where some real-mode handlers are */
+ vcpu->arch.trampoline_lowmem = kvmppc_trampoline_lowmem;
+ vcpu->arch.trampoline_enter = kvmppc_trampoline_enter;
+ vcpu->arch.highmem_handler = (ulong)kvmppc_handler_highmem;
+
+ vcpu->arch.shadow_msr = MSR_USER64;
+
+ err = __init_new_context();
+ if (err < 0)
+ goto free_vcpu;
+ vcpu_book3s->context_id = err;
+
+ vcpu_book3s->vsid_max = ((vcpu_book3s->context_id + 1) << USER_ESID_BITS) - 1;
+ vcpu_book3s->vsid_first = vcpu_book3s->context_id << USER_ESID_BITS;
+ vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+
+ return vcpu;
+
+free_vcpu:
+ free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+out:
+ return ERR_PTR(err);
+}
+
+void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+
+ __destroy_context(vcpu_book3s->context_id);
+ kvm_vcpu_uninit(vcpu);
+ free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+}
+
+extern int __kvmppc_vcpu_entry(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
+int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+{
+ int ret;
+
+ /* No need to go into the guest when all we do is going out */
+ if (signal_pending(current)) {
+ kvm_run->exit_reason = KVM_EXIT_INTR;
+ return -EINTR;
+ }
+
+ /* XXX we get called with irq disabled - change that! */
+ local_irq_enable();
+
+ ret = __kvmppc_vcpu_entry(kvm_run, vcpu);
+
+ local_irq_disable();
+
+ return ret;
+}
+
+static int kvmppc_book3s_init(void)
+{
+ return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), THIS_MODULE);
+}
+
+static void kvmppc_book3s_exit(void)
+{
+ kvm_exit();
+}
+
+module_init(kvmppc_book3s_init);
+module_exit(kvmppc_book3s_exit);
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/highmem.h>
+
+#include <asm/tlbflush.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+
+/* #define DEBUG_MMU */
+/* #define DEBUG_MMU_PTE */
+/* #define DEBUG_MMU_PTE_IP 0xfff14c40 */
+
+#ifdef DEBUG_MMU
+#define dprintk(X...) printk(KERN_INFO X)
+#else
+#define dprintk(X...) do { } while(0)
+#endif
+
+#ifdef DEBUG_PTE
+#define dprintk_pte(X...) printk(KERN_INFO X)
+#else
+#define dprintk_pte(X...) do { } while(0)
+#endif
+
+#define PTEG_FLAG_ACCESSED 0x00000100
+#define PTEG_FLAG_DIRTY 0x00000080
+
+static inline bool check_debug_ip(struct kvm_vcpu *vcpu)
+{
+#ifdef DEBUG_MMU_PTE_IP
+ return vcpu->arch.pc == DEBUG_MMU_PTE_IP;
+#else
+ return true;
+#endif
+}
+
+static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *pte, bool data);
+
+static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t eaddr)
+{
+ return &vcpu_book3s->sr[(eaddr >> 28) & 0xf];
+}
+
+static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
+ bool data)
+{
+ struct kvmppc_sr *sre = find_sr(to_book3s(vcpu), eaddr);
+ struct kvmppc_pte pte;
+
+ if (!kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, &pte, data))
+ return pte.vpage;
+
+ return (((u64)eaddr >> 12) & 0xffff) | (((u64)sre->vsid) << 16);
+}
+
+static void kvmppc_mmu_book3s_32_reset_msr(struct kvm_vcpu *vcpu)
+{
+ kvmppc_set_msr(vcpu, 0);
+}
+
+static hva_t kvmppc_mmu_book3s_32_get_pteg(struct kvmppc_vcpu_book3s *vcpu_book3s,
+ struct kvmppc_sr *sre, gva_t eaddr,
+ bool primary)
+{
+ u32 page, hash, pteg, htabmask;
+ hva_t r;
+
+ page = (eaddr & 0x0FFFFFFF) >> 12;
+ htabmask = ((vcpu_book3s->sdr1 & 0x1FF) << 16) | 0xFFC0;
+
+ hash = ((sre->vsid ^ page) << 6);
+ if (!primary)
+ hash = ~hash;
+ hash &= htabmask;
+
+ pteg = (vcpu_book3s->sdr1 & 0xffff0000) | hash;
+
+ dprintk("MMU: pc=0x%lx eaddr=0x%lx sdr1=0x%llx pteg=0x%x vsid=0x%x\n",
+ vcpu_book3s->vcpu.arch.pc, eaddr, vcpu_book3s->sdr1, pteg,
+ sre->vsid);
+
+ r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT);
+ if (kvm_is_error_hva(r))
+ return r;
+ return r | (pteg & ~PAGE_MASK);
+}
+
+static u32 kvmppc_mmu_book3s_32_get_ptem(struct kvmppc_sr *sre, gva_t eaddr,
+ bool primary)
+{
+ return ((eaddr & 0x0fffffff) >> 22) | (sre->vsid << 7) |
+ (primary ? 0 : 0x40) | 0x80000000;
+}
+
+static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *pte, bool data)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_bat *bat;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (data)
+ bat = &vcpu_book3s->dbat[i];
+ else
+ bat = &vcpu_book3s->ibat[i];
+
+ if (vcpu->arch.msr & MSR_PR) {
+ if (!bat->vp)
+ continue;
+ } else {
+ if (!bat->vs)
+ continue;
+ }
+
+ if (check_debug_ip(vcpu))
+ {
+ dprintk_pte("%cBAT %02d: 0x%lx - 0x%x (0x%x)\n",
+ data ? 'd' : 'i', i, eaddr, bat->bepi,
+ bat->bepi_mask);
+ }
+ if ((eaddr & bat->bepi_mask) == bat->bepi) {
+ pte->raddr = bat->brpn | (eaddr & ~bat->bepi_mask);
+ pte->vpage = (eaddr >> 12) | VSID_BAT;
+ pte->may_read = bat->pp;
+ pte->may_write = bat->pp > 1;
+ pte->may_execute = true;
+ if (!pte->may_read) {
+ printk(KERN_INFO "BAT is not readable!\n");
+ continue;
+ }
+ if (!pte->may_write) {
+ /* let's treat r/o BATs as not-readable for now */
+ dprintk_pte("BAT is read-only!\n");
+ continue;
+ }
+
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
+static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *pte, bool data,
+ bool primary)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_sr *sre;
+ hva_t ptegp;
+ u32 pteg[16];
+ u64 ptem = 0;
+ int i;
+ int found = 0;
+
+ sre = find_sr(vcpu_book3s, eaddr);
+
+ dprintk_pte("SR 0x%lx: vsid=0x%x, raw=0x%x\n", eaddr >> 28,
+ sre->vsid, sre->raw);
+
+ pte->vpage = kvmppc_mmu_book3s_32_ea_to_vp(vcpu, eaddr, data);
+
+ ptegp = kvmppc_mmu_book3s_32_get_pteg(vcpu_book3s, sre, eaddr, primary);
+ if (kvm_is_error_hva(ptegp)) {
+ printk(KERN_INFO "KVM: Invalid PTEG!\n");
+ goto no_page_found;
+ }
+
+ ptem = kvmppc_mmu_book3s_32_get_ptem(sre, eaddr, primary);
+
+ if(copy_from_user(pteg, (void __user *)ptegp, sizeof(pteg))) {
+ printk(KERN_ERR "KVM: Can't copy data from 0x%lx!\n", ptegp);
+ goto no_page_found;
+ }
+
+ for (i=0; i<16; i+=2) {
+ if (ptem == pteg[i]) {
+ u8 pp;
+
+ pte->raddr = (pteg[i+1] & ~(0xFFFULL)) | (eaddr & 0xFFF);
+ pp = pteg[i+1] & 3;
+
+ if ((sre->Kp && (vcpu->arch.msr & MSR_PR)) ||
+ (sre->Ks && !(vcpu->arch.msr & MSR_PR)))
+ pp |= 4;
+
+ pte->may_write = false;
+ pte->may_read = false;
+ pte->may_execute = true;
+ switch (pp) {
+ case 0:
+ case 1:
+ case 2:
+ case 6:
+ pte->may_write = true;
+ case 3:
+ case 5:
+ case 7:
+ pte->may_read = true;
+ break;
+ }
+
+ if ( !pte->may_read )
+ continue;
+
+ dprintk_pte("MMU: Found PTE -> %x %x - %x\n",
+ pteg[i], pteg[i+1], pp);
+ found = 1;
+ break;
+ }
+ }
+
+ /* Update PTE C and A bits, so the guest's swapper knows we used the
+ page */
+ if (found) {
+ u32 oldpte = pteg[i+1];
+
+ if (pte->may_read)
+ pteg[i+1] |= PTEG_FLAG_ACCESSED;
+ if (pte->may_write)
+ pteg[i+1] |= PTEG_FLAG_DIRTY;
+ else
+ dprintk_pte("KVM: Mapping read-only page!\n");
+
+ /* Write back into the PTEG */
+ if (pteg[i+1] != oldpte)
+ copy_to_user((void __user *)ptegp, pteg, sizeof(pteg));
+
+ return 0;
+ }
+
+no_page_found:
+
+ if (check_debug_ip(vcpu)) {
+ dprintk_pte("KVM MMU: No PTE found (sdr1=0x%llx ptegp=0x%lx)\n",
+ to_book3s(vcpu)->sdr1, ptegp);
+ for (i=0; i<16; i+=2) {
+ dprintk_pte(" %02d: 0x%x - 0x%x (0x%llx)\n",
+ i, pteg[i], pteg[i+1], ptem);
+ }
+ }
+
+ return -ENOENT;
+}
+
+static int kvmppc_mmu_book3s_32_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *pte, bool data)
+{
+ int r;
+
+ pte->eaddr = eaddr;
+ r = kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, pte, data);
+ if (r < 0)
+ r = kvmppc_mmu_book3s_32_xlate_pte(vcpu, eaddr, pte, data, true);
+ if (r < 0)
+ r = kvmppc_mmu_book3s_32_xlate_pte(vcpu, eaddr, pte, data, false);
+
+ return r;
+}
+
+
+static u32 kvmppc_mmu_book3s_32_mfsrin(struct kvm_vcpu *vcpu, u32 srnum)
+{
+ return to_book3s(vcpu)->sr[srnum].raw;
+}
+
+static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
+ ulong value)
+{
+ struct kvmppc_sr *sre;
+
+ sre = &to_book3s(vcpu)->sr[srnum];
+
+ /* Flush any left-over shadows from the previous SR */
+
+ /* XXX Not necessary? */
+ /* kvmppc_mmu_pte_flush(vcpu, ((u64)sre->vsid) << 28, 0xf0000000ULL); */
+
+ /* And then put in the new SR */
+ sre->raw = value;
+ sre->vsid = (value & 0x0fffffff);
+ sre->Ks = (value & 0x40000000) ? true : false;
+ sre->Kp = (value & 0x20000000) ? true : false;
+ sre->nx = (value & 0x10000000) ? true : false;
+
+ /* Map the new segment */
+ kvmppc_mmu_map_segment(vcpu, srnum << SID_SHIFT);
+}
+
+static void kvmppc_mmu_book3s_32_tlbie(struct kvm_vcpu *vcpu, ulong ea, bool large)
+{
+ kvmppc_mmu_pte_flush(vcpu, ea, ~0xFFFULL);
+}
+
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+ u64 *vsid)
+{
+ /* In case we only have one of MSR_IR or MSR_DR set, let's put
+ that in the real-mode context (and hope RM doesn't access
+ high memory) */
+ switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+ case 0:
+ *vsid = (VSID_REAL >> 16) | esid;
+ break;
+ case MSR_IR:
+ *vsid = (VSID_REAL_IR >> 16) | esid;
+ break;
+ case MSR_DR:
+ *vsid = (VSID_REAL_DR >> 16) | esid;
+ break;
+ case MSR_DR|MSR_IR:
+ {
+ ulong ea;
+ ea = esid << SID_SHIFT;
+ *vsid = find_sr(to_book3s(vcpu), ea)->vsid;
+ break;
+ }
+ default:
+ BUG();
+ }
+
+ return 0;
+}
+
+static bool kvmppc_mmu_book3s_32_is_dcbz32(struct kvm_vcpu *vcpu)
+{
+ return true;
+}
+
+
+void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_mmu *mmu = &vcpu->arch.mmu;
+
+ mmu->mtsrin = kvmppc_mmu_book3s_32_mtsrin;
+ mmu->mfsrin = kvmppc_mmu_book3s_32_mfsrin;
+ mmu->xlate = kvmppc_mmu_book3s_32_xlate;
+ mmu->reset_msr = kvmppc_mmu_book3s_32_reset_msr;
+ mmu->tlbie = kvmppc_mmu_book3s_32_tlbie;
+ mmu->esid_to_vsid = kvmppc_mmu_book3s_32_esid_to_vsid;
+ mmu->ea_to_vp = kvmppc_mmu_book3s_32_ea_to_vp;
+ mmu->is_dcbz32 = kvmppc_mmu_book3s_32_is_dcbz32;
+
+ mmu->slbmte = NULL;
+ mmu->slbmfee = NULL;
+ mmu->slbmfev = NULL;
+ mmu->slbie = NULL;
+ mmu->slbia = NULL;
+}
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/kvm_ppc.h>
+#include <asm/disassemble.h>
+#include <asm/kvm_book3s.h>
+#include <asm/reg.h>
+
+#define OP_19_XOP_RFID 18
+#define OP_19_XOP_RFI 50
+
+#define OP_31_XOP_MFMSR 83
+#define OP_31_XOP_MTMSR 146
+#define OP_31_XOP_MTMSRD 178
+#define OP_31_XOP_MTSRIN 242
+#define OP_31_XOP_TLBIEL 274
+#define OP_31_XOP_TLBIE 306
+#define OP_31_XOP_SLBMTE 402
+#define OP_31_XOP_SLBIE 434
+#define OP_31_XOP_SLBIA 498
+#define OP_31_XOP_MFSRIN 659
+#define OP_31_XOP_SLBMFEV 851
+#define OP_31_XOP_EIOIO 854
+#define OP_31_XOP_SLBMFEE 915
+
+/* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
+#define OP_31_XOP_DCBZ 1010
+
+int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
+ unsigned int inst, int *advance)
+{
+ int emulated = EMULATE_DONE;
+
+ switch (get_op(inst)) {
+ case 19:
+ switch (get_xop(inst)) {
+ case OP_19_XOP_RFID:
+ case OP_19_XOP_RFI:
+ vcpu->arch.pc = vcpu->arch.srr0;
+ kvmppc_set_msr(vcpu, vcpu->arch.srr1);
+ *advance = 0;
+ break;
+
+ default:
+ emulated = EMULATE_FAIL;
+ break;
+ }
+ break;
+ case 31:
+ switch (get_xop(inst)) {
+ case OP_31_XOP_MFMSR:
+ vcpu->arch.gpr[get_rt(inst)] = vcpu->arch.msr;
+ break;
+ case OP_31_XOP_MTMSRD:
+ {
+ ulong rs = vcpu->arch.gpr[get_rs(inst)];
+ if (inst & 0x10000) {
+ vcpu->arch.msr &= ~(MSR_RI | MSR_EE);
+ vcpu->arch.msr |= rs & (MSR_RI | MSR_EE);
+ } else
+ kvmppc_set_msr(vcpu, rs);
+ break;
+ }
+ case OP_31_XOP_MTMSR:
+ kvmppc_set_msr(vcpu, vcpu->arch.gpr[get_rs(inst)]);
+ break;
+ case OP_31_XOP_MFSRIN:
+ {
+ int srnum;
+
+ srnum = (vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf;
+ if (vcpu->arch.mmu.mfsrin) {
+ u32 sr;
+ sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+ vcpu->arch.gpr[get_rt(inst)] = sr;
+ }
+ break;
+ }
+ case OP_31_XOP_MTSRIN:
+ vcpu->arch.mmu.mtsrin(vcpu,
+ (vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf,
+ vcpu->arch.gpr[get_rs(inst)]);
+ break;
+ case OP_31_XOP_TLBIE:
+ case OP_31_XOP_TLBIEL:
+ {
+ bool large = (inst & 0x00200000) ? true : false;
+ ulong addr = vcpu->arch.gpr[get_rb(inst)];
+ vcpu->arch.mmu.tlbie(vcpu, addr, large);
+ break;
+ }
+ case OP_31_XOP_EIOIO:
+ break;
+ case OP_31_XOP_SLBMTE:
+ if (!vcpu->arch.mmu.slbmte)
+ return EMULATE_FAIL;
+
+ vcpu->arch.mmu.slbmte(vcpu, vcpu->arch.gpr[get_rs(inst)],
+ vcpu->arch.gpr[get_rb(inst)]);
+ break;
+ case OP_31_XOP_SLBIE:
+ if (!vcpu->arch.mmu.slbie)
+ return EMULATE_FAIL;
+
+ vcpu->arch.mmu.slbie(vcpu, vcpu->arch.gpr[get_rb(inst)]);
+ break;
+ case OP_31_XOP_SLBIA:
+ if (!vcpu->arch.mmu.slbia)
+ return EMULATE_FAIL;
+
+ vcpu->arch.mmu.slbia(vcpu);
+ break;
+ case OP_31_XOP_SLBMFEE:
+ if (!vcpu->arch.mmu.slbmfee) {
+ emulated = EMULATE_FAIL;
+ } else {
+ ulong t, rb;
+
+ rb = vcpu->arch.gpr[get_rb(inst)];
+ t = vcpu->arch.mmu.slbmfee(vcpu, rb);
+ vcpu->arch.gpr[get_rt(inst)] = t;
+ }
+ break;
+ case OP_31_XOP_SLBMFEV:
+ if (!vcpu->arch.mmu.slbmfev) {
+ emulated = EMULATE_FAIL;
+ } else {
+ ulong t, rb;
+
+ rb = vcpu->arch.gpr[get_rb(inst)];
+ t = vcpu->arch.mmu.slbmfev(vcpu, rb);
+ vcpu->arch.gpr[get_rt(inst)] = t;
+ }
+ break;
+ case OP_31_XOP_DCBZ:
+ {
+ ulong rb = vcpu->arch.gpr[get_rb(inst)];
+ ulong ra = 0;
+ ulong addr;
+ u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+
+ if (get_ra(inst))
+ ra = vcpu->arch.gpr[get_ra(inst)];
+
+ addr = (ra + rb) & ~31ULL;
+ if (!(vcpu->arch.msr & MSR_SF))
+ addr &= 0xffffffff;
+
+ if (kvmppc_st(vcpu, addr, 32, zeros)) {
+ vcpu->arch.dear = addr;
+ vcpu->arch.fault_dear = addr;
+ to_book3s(vcpu)->dsisr = DSISR_PROTFAULT |
+ DSISR_ISSTORE;
+ kvmppc_book3s_queue_irqprio(vcpu,
+ BOOK3S_INTERRUPT_DATA_STORAGE);
+ kvmppc_mmu_pte_flush(vcpu, addr, ~0xFFFULL);
+ }
+
+ break;
+ }
+ default:
+ emulated = EMULATE_FAIL;
+ }
+ break;
+ default:
+ emulated = EMULATE_FAIL;
+ }
+
+ return emulated;
+}
+
+void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
+ u32 val)
+{
+ if (upper) {
+ /* Upper BAT */
+ u32 bl = (val >> 2) & 0x7ff;
+ bat->bepi_mask = (~bl << 17);
+ bat->bepi = val & 0xfffe0000;
+ bat->vs = (val & 2) ? 1 : 0;
+ bat->vp = (val & 1) ? 1 : 0;
+ bat->raw = (bat->raw & 0xffffffff00000000ULL) | val;
+ } else {
+ /* Lower BAT */
+ bat->brpn = val & 0xfffe0000;
+ bat->wimg = (val >> 3) & 0xf;
+ bat->pp = val & 3;
+ bat->raw = (bat->raw & 0x00000000ffffffffULL) | ((u64)val << 32);
+ }
+}
+
+static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_bat *bat;
+
+ switch (sprn) {
+ case SPRN_IBAT0U ... SPRN_IBAT3L:
+ bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+ break;
+ case SPRN_IBAT4U ... SPRN_IBAT7L:
+ bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT4U) / 2];
+ break;
+ case SPRN_DBAT0U ... SPRN_DBAT3L:
+ bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+ break;
+ case SPRN_DBAT4U ... SPRN_DBAT7L:
+ bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT4U) / 2];
+ break;
+ default:
+ BUG();
+ }
+
+ kvmppc_set_bat(vcpu, bat, !(sprn % 2), val);
+}
+
+int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
+{
+ int emulated = EMULATE_DONE;
+
+ switch (sprn) {
+ case SPRN_SDR1:
+ to_book3s(vcpu)->sdr1 = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_DSISR:
+ to_book3s(vcpu)->dsisr = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_DAR:
+ vcpu->arch.dear = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HIOR:
+ to_book3s(vcpu)->hior = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_IBAT0U ... SPRN_IBAT3L:
+ case SPRN_IBAT4U ... SPRN_IBAT7L:
+ case SPRN_DBAT0U ... SPRN_DBAT3L:
+ case SPRN_DBAT4U ... SPRN_DBAT7L:
+ kvmppc_write_bat(vcpu, sprn, (u32)vcpu->arch.gpr[rs]);
+ /* BAT writes happen so rarely that we're ok to flush
+ * everything here */
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+ break;
+ case SPRN_HID0:
+ to_book3s(vcpu)->hid[0] = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HID1:
+ to_book3s(vcpu)->hid[1] = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HID2:
+ to_book3s(vcpu)->hid[2] = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HID4:
+ to_book3s(vcpu)->hid[4] = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HID5:
+ to_book3s(vcpu)->hid[5] = vcpu->arch.gpr[rs];
+ /* guest HID5 set can change is_dcbz32 */
+ if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+ (mfmsr() & MSR_HV))
+ vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+ break;
+ case SPRN_ICTC:
+ case SPRN_THRM1:
+ case SPRN_THRM2:
+ case SPRN_THRM3:
+ case SPRN_CTRLF:
+ case SPRN_CTRLT:
+ break;
+ default:
+ printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn);
+#ifndef DEBUG_SPR
+ emulated = EMULATE_FAIL;
+#endif
+ break;
+ }
+
+ return emulated;
+}
+
+int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
+{
+ int emulated = EMULATE_DONE;
+
+ switch (sprn) {
+ case SPRN_SDR1:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->sdr1;
+ break;
+ case SPRN_DSISR:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->dsisr;
+ break;
+ case SPRN_DAR:
+ vcpu->arch.gpr[rt] = vcpu->arch.dear;
+ break;
+ case SPRN_HIOR:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hior;
+ break;
+ case SPRN_HID0:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[0];
+ break;
+ case SPRN_HID1:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[1];
+ break;
+ case SPRN_HID2:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[2];
+ break;
+ case SPRN_HID4:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[4];
+ break;
+ case SPRN_HID5:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[5];
+ break;
+ case SPRN_THRM1:
+ case SPRN_THRM2:
+ case SPRN_THRM3:
+ case SPRN_CTRLF:
+ case SPRN_CTRLT:
+ vcpu->arch.gpr[rt] = 0;
+ break;
+ default:
+ printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn);
+#ifndef DEBUG_SPR
+ emulated = EMULATE_FAIL;
+#endif
+ break;
+ }
+
+ return emulated;
+}
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/module.h>
+#include <asm/kvm_book3s.h>
+
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_enter);
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_lowmem);
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/exception-64s.h>
+
+#define KVMPPC_HANDLE_EXIT .kvmppc_handle_exit
+#define ULONG_SIZE 8
+#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
+
+.macro mfpaca tmp_reg, src_reg, offset, vcpu_reg
+ ld \tmp_reg, (PACA_EXMC+\offset)(r13)
+ std \tmp_reg, VCPU_GPR(\src_reg)(\vcpu_reg)
+.endm
+
+.macro DISABLE_INTERRUPTS
+ mfmsr r0
+ rldicl r0,r0,48,1
+ rotldi r0,r0,16
+ mtmsrd r0,1
+.endm
+
+/*****************************************************************************
+ * *
+ * Guest entry / exit code that is in kernel module memory (highmem) *
+ * *
+ ****************************************************************************/
+
+/* Registers:
+ * r3: kvm_run pointer
+ * r4: vcpu pointer
+ */
+_GLOBAL(__kvmppc_vcpu_entry)
+
+kvm_start_entry:
+ /* Write correct stack frame */
+ mflr r0
+ std r0,16(r1)
+
+ /* Save host state to the stack */
+ stdu r1, -SWITCH_FRAME_SIZE(r1)
+
+ /* Save r3 (kvm_run) and r4 (vcpu) */
+ SAVE_2GPRS(3, r1)
+
+ /* Save non-volatile registers (r14 - r31) */
+ SAVE_NVGPRS(r1)
+
+ /* Save LR */
+ mflr r14
+ std r14, _LINK(r1)
+
+/* XXX optimize non-volatile loading away */
+kvm_start_lightweight:
+
+ DISABLE_INTERRUPTS
+
+ /* Save R1/R2 in the PACA */
+ std r1, PACAR1(r13)
+ std r2, (PACA_EXMC+EX_SRR0)(r13)
+ ld r3, VCPU_HIGHMEM_HANDLER(r4)
+ std r3, PACASAVEDMSR(r13)
+
+ /* Load non-volatile guest state from the vcpu */
+ ld r14, VCPU_GPR(r14)(r4)
+ ld r15, VCPU_GPR(r15)(r4)
+ ld r16, VCPU_GPR(r16)(r4)
+ ld r17, VCPU_GPR(r17)(r4)
+ ld r18, VCPU_GPR(r18)(r4)
+ ld r19, VCPU_GPR(r19)(r4)
+ ld r20, VCPU_GPR(r20)(r4)
+ ld r21, VCPU_GPR(r21)(r4)
+ ld r22, VCPU_GPR(r22)(r4)
+ ld r23, VCPU_GPR(r23)(r4)
+ ld r24, VCPU_GPR(r24)(r4)
+ ld r25, VCPU_GPR(r25)(r4)
+ ld r26, VCPU_GPR(r26)(r4)
+ ld r27, VCPU_GPR(r27)(r4)
+ ld r28, VCPU_GPR(r28)(r4)
+ ld r29, VCPU_GPR(r29)(r4)
+ ld r30, VCPU_GPR(r30)(r4)
+ ld r31, VCPU_GPR(r31)(r4)
+
+ ld r9, VCPU_PC(r4) /* r9 = vcpu->arch.pc */
+ ld r10, VCPU_SHADOW_MSR(r4) /* r10 = vcpu->arch.shadow_msr */
+
+ ld r3, VCPU_TRAMPOLINE_ENTER(r4)
+ mtsrr0 r3
+
+ LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+ mtsrr1 r3
+
+ /* Load guest state in the respective registers */
+ lwz r3, VCPU_CR(r4) /* r3 = vcpu->arch.cr */
+ stw r3, (PACA_EXMC + EX_CCR)(r13)
+
+ ld r3, VCPU_CTR(r4) /* r3 = vcpu->arch.ctr */
+ mtctr r3 /* CTR = r3 */
+
+ ld r3, VCPU_LR(r4) /* r3 = vcpu->arch.lr */
+ mtlr r3 /* LR = r3 */
+
+ ld r3, VCPU_XER(r4) /* r3 = vcpu->arch.xer */
+ std r3, (PACA_EXMC + EX_R3)(r13)
+
+ /* Some guests may need to have dcbz set to 32 byte length.
+ *
+ * Usually we ensure that by patching the guest's instructions
+ * to trap on dcbz and emulate it in the hypervisor.
+ *
+ * If we can, we should tell the CPU to use 32 byte dcbz though,
+ * because that's a lot faster.
+ */
+
+ ld r3, VCPU_HFLAGS(r4)
+ rldicl. r3, r3, 0, 63 /* CR = ((r3 & 1) == 0) */
+ beq no_dcbz32_on
+
+ mfspr r3,SPRN_HID5
+ ori r3, r3, 0x80 /* XXX HID5_dcbz32 = 0x80 */
+ mtspr SPRN_HID5,r3
+
+no_dcbz32_on:
+ /* Load guest GPRs */
+
+ ld r3, VCPU_GPR(r9)(r4)
+ std r3, (PACA_EXMC + EX_R9)(r13)
+ ld r3, VCPU_GPR(r10)(r4)
+ std r3, (PACA_EXMC + EX_R10)(r13)
+ ld r3, VCPU_GPR(r11)(r4)
+ std r3, (PACA_EXMC + EX_R11)(r13)
+ ld r3, VCPU_GPR(r12)(r4)
+ std r3, (PACA_EXMC + EX_R12)(r13)
+ ld r3, VCPU_GPR(r13)(r4)
+ std r3, (PACA_EXMC + EX_R13)(r13)
+
+ ld r0, VCPU_GPR(r0)(r4)
+ ld r1, VCPU_GPR(r1)(r4)
+ ld r2, VCPU_GPR(r2)(r4)
+ ld r3, VCPU_GPR(r3)(r4)
+ ld r5, VCPU_GPR(r5)(r4)
+ ld r6, VCPU_GPR(r6)(r4)
+ ld r7, VCPU_GPR(r7)(r4)
+ ld r8, VCPU_GPR(r8)(r4)
+ ld r4, VCPU_GPR(r4)(r4)
+
+ /* This sets the Magic value for the trampoline */
+
+ li r11, 1
+ stb r11, PACA_KVM_IN_GUEST(r13)
+
+ /* Jump to SLB patching handlder and into our guest */
+ RFI
+
+/*
+ * This is the handler in module memory. It gets jumped at from the
+ * lowmem trampoline code, so it's basically the guest exit code.
+ *
+ */
+
+.global kvmppc_handler_highmem
+kvmppc_handler_highmem:
+
+ /*
+ * Register usage at this point:
+ *
+ * R00 = guest R13
+ * R01 = host R1
+ * R02 = host R2
+ * R10 = guest PC
+ * R11 = guest MSR
+ * R12 = exit handler id
+ * R13 = PACA
+ * PACA.exmc.R9 = guest R1
+ * PACA.exmc.R10 = guest R10
+ * PACA.exmc.R11 = guest R11
+ * PACA.exmc.R12 = guest R12
+ * PACA.exmc.R13 = guest R2
+ * PACA.exmc.DAR = guest DAR
+ * PACA.exmc.DSISR = guest DSISR
+ * PACA.exmc.LR = guest instruction
+ * PACA.exmc.CCR = guest CR
+ * PACA.exmc.SRR0 = guest R0
+ *
+ */
+
+ std r3, (PACA_EXMC+EX_R3)(r13)
+
+ /* save the exit id in R3 */
+ mr r3, r12
+
+ /* R12 = vcpu */
+ ld r12, GPR4(r1)
+
+ /* Now save the guest state */
+
+ std r0, VCPU_GPR(r13)(r12)
+ std r4, VCPU_GPR(r4)(r12)
+ std r5, VCPU_GPR(r5)(r12)
+ std r6, VCPU_GPR(r6)(r12)
+ std r7, VCPU_GPR(r7)(r12)
+ std r8, VCPU_GPR(r8)(r12)
+ std r9, VCPU_GPR(r9)(r12)
+
+ /* get registers from PACA */
+ mfpaca r5, r0, EX_SRR0, r12
+ mfpaca r5, r3, EX_R3, r12
+ mfpaca r5, r1, EX_R9, r12
+ mfpaca r5, r10, EX_R10, r12
+ mfpaca r5, r11, EX_R11, r12
+ mfpaca r5, r12, EX_R12, r12
+ mfpaca r5, r2, EX_R13, r12
+
+ lwz r5, (PACA_EXMC+EX_LR)(r13)
+ stw r5, VCPU_LAST_INST(r12)
+
+ lwz r5, (PACA_EXMC+EX_CCR)(r13)
+ stw r5, VCPU_CR(r12)
+
+ ld r5, VCPU_HFLAGS(r12)
+ rldicl. r5, r5, 0, 63 /* CR = ((r5 & 1) == 0) */
+ beq no_dcbz32_off
+
+ mfspr r5,SPRN_HID5
+ rldimi r5,r5,6,56
+ mtspr SPRN_HID5,r5
+
+no_dcbz32_off:
+
+ /* XXX maybe skip on lightweight? */
+ std r14, VCPU_GPR(r14)(r12)
+ std r15, VCPU_GPR(r15)(r12)
+ std r16, VCPU_GPR(r16)(r12)
+ std r17, VCPU_GPR(r17)(r12)
+ std r18, VCPU_GPR(r18)(r12)
+ std r19, VCPU_GPR(r19)(r12)
+ std r20, VCPU_GPR(r20)(r12)
+ std r21, VCPU_GPR(r21)(r12)
+ std r22, VCPU_GPR(r22)(r12)
+ std r23, VCPU_GPR(r23)(r12)
+ std r24, VCPU_GPR(r24)(r12)
+ std r25, VCPU_GPR(r25)(r12)
+ std r26, VCPU_GPR(r26)(r12)
+ std r27, VCPU_GPR(r27)(r12)
+ std r28, VCPU_GPR(r28)(r12)
+ std r29, VCPU_GPR(r29)(r12)
+ std r30, VCPU_GPR(r30)(r12)
+ std r31, VCPU_GPR(r31)(r12)
+
+ /* Restore non-volatile host registers (r14 - r31) */
+ REST_NVGPRS(r1)
+
+ /* Save guest PC (R10) */
+ std r10, VCPU_PC(r12)
+
+ /* Save guest msr (R11) */
+ std r11, VCPU_SHADOW_MSR(r12)
+
+ /* Save guest CTR (in R12) */
+ mfctr r5
+ std r5, VCPU_CTR(r12)
+
+ /* Save guest LR */
+ mflr r5
+ std r5, VCPU_LR(r12)
+
+ /* Save guest XER */
+ mfxer r5
+ std r5, VCPU_XER(r12)
+
+ /* Save guest DAR */
+ ld r5, (PACA_EXMC+EX_DAR)(r13)
+ std r5, VCPU_FAULT_DEAR(r12)
+
+ /* Save guest DSISR */
+ lwz r5, (PACA_EXMC+EX_DSISR)(r13)
+ std r5, VCPU_FAULT_DSISR(r12)
+
+ /* Restore host msr -> SRR1 */
+ ld r7, VCPU_HOST_MSR(r12)
+ mtsrr1 r7
+
+ /* Restore host IP -> SRR0 */
+ ld r6, VCPU_HOST_RETIP(r12)
+ mtsrr0 r6
+
+ /*
+ * For some interrupts, we need to call the real Linux
+ * handler, so it can do work for us. This has to happen
+ * as if the interrupt arrived from the kernel though,
+ * so let's fake it here where most state is restored.
+ *
+ * Call Linux for hardware interrupts/decrementer
+ * r3 = address of interrupt handler (exit reason)
+ */
+
+ cmpwi r3, BOOK3S_INTERRUPT_EXTERNAL
+ beq call_linux_handler
+ cmpwi r3, BOOK3S_INTERRUPT_DECREMENTER
+ beq call_linux_handler
+
+ /* Back to Interruptable Mode! (goto kvm_return_point) */
+ RFI
+
+call_linux_handler:
+
+ /*
+ * If we land here we need to jump back to the handler we
+ * came from.
+ *
+ * We have a page that we can access from real mode, so let's
+ * jump back to that and use it as a trampoline to get back into the
+ * interrupt handler!
+ *
+ * R3 still contains the exit code,
+ * R6 VCPU_HOST_RETIP and
+ * R7 VCPU_HOST_MSR
+ */
+
+ mtlr r3
+
+ ld r5, VCPU_TRAMPOLINE_LOWMEM(r12)
+ mtsrr0 r5
+ LOAD_REG_IMMEDIATE(r5, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+ mtsrr1 r5
+
+ RFI
+
+.global kvm_return_point
+kvm_return_point:
+
+ /* Jump back to lightweight entry if we're supposed to */
+ /* go back into the guest */
+ mr r5, r3
+ /* Restore r3 (kvm_run) and r4 (vcpu) */
+ REST_2GPRS(3, r1)
+ bl KVMPPC_HANDLE_EXIT
+
+#if 0 /* XXX get lightweight exits back */
+ cmpwi r3, RESUME_GUEST
+ bne kvm_exit_heavyweight
+
+ /* put VCPU and KVM_RUN back into place and roll again! */
+ REST_2GPRS(3, r1)
+ b kvm_start_lightweight
+
+kvm_exit_heavyweight:
+ /* Restore non-volatile host registers */
+ ld r14, _LINK(r1)
+ mtlr r14
+ REST_NVGPRS(r1)
+
+ addi r1, r1, SWITCH_FRAME_SIZE
+#else
+ ld r4, _LINK(r1)
+ mtlr r4
+
+ cmpwi r3, RESUME_GUEST
+ bne kvm_exit_heavyweight
+
+ REST_2GPRS(3, r1)
+
+ addi r1, r1, SWITCH_FRAME_SIZE
+
+ b kvm_start_entry
+
+kvm_exit_heavyweight:
+
+ addi r1, r1, SWITCH_FRAME_SIZE
+#endif
+
+ blr
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/highmem.h>
+
+#include <asm/tlbflush.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+
+/* #define DEBUG_MMU */
+
+#ifdef DEBUG_MMU
+#define dprintk(X...) printk(KERN_INFO X)
+#else
+#define dprintk(X...) do { } while(0)
+#endif
+
+static void kvmppc_mmu_book3s_64_reset_msr(struct kvm_vcpu *vcpu)
+{
+ kvmppc_set_msr(vcpu, MSR_SF);
+}
+
+static struct kvmppc_slb *kvmppc_mmu_book3s_64_find_slbe(
+ struct kvmppc_vcpu_book3s *vcpu_book3s,
+ gva_t eaddr)
+{
+ int i;
+ u64 esid = GET_ESID(eaddr);
+ u64 esid_1t = GET_ESID_1T(eaddr);
+
+ for (i = 0; i < vcpu_book3s->slb_nr; i++) {
+ u64 cmp_esid = esid;
+
+ if (!vcpu_book3s->slb[i].valid)
+ continue;
+
+ if (vcpu_book3s->slb[i].large)
+ cmp_esid = esid_1t;
+
+ if (vcpu_book3s->slb[i].esid == cmp_esid)
+ return &vcpu_book3s->slb[i];
+ }
+
+ dprintk("KVM: No SLB entry found for 0x%lx [%llx | %llx]\n",
+ eaddr, esid, esid_1t);
+ for (i = 0; i < vcpu_book3s->slb_nr; i++) {
+ if (vcpu_book3s->slb[i].vsid)
+ dprintk(" %d: %c%c %llx %llx\n", i,
+ vcpu_book3s->slb[i].valid ? 'v' : ' ',
+ vcpu_book3s->slb[i].large ? 'l' : ' ',
+ vcpu_book3s->slb[i].esid,
+ vcpu_book3s->slb[i].vsid);
+ }
+
+ return NULL;
+}
+
+static u64 kvmppc_mmu_book3s_64_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
+ bool data)
+{
+ struct kvmppc_slb *slb;
+
+ slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), eaddr);
+ if (!slb)
+ return 0;
+
+ if (slb->large)
+ return (((u64)eaddr >> 12) & 0xfffffff) |
+ (((u64)slb->vsid) << 28);
+
+ return (((u64)eaddr >> 12) & 0xffff) | (((u64)slb->vsid) << 16);
+}
+
+static int kvmppc_mmu_book3s_64_get_pagesize(struct kvmppc_slb *slbe)
+{
+ return slbe->large ? 24 : 12;
+}
+
+static u32 kvmppc_mmu_book3s_64_get_page(struct kvmppc_slb *slbe, gva_t eaddr)
+{
+ int p = kvmppc_mmu_book3s_64_get_pagesize(slbe);
+ return ((eaddr & 0xfffffff) >> p);
+}
+
+static hva_t kvmppc_mmu_book3s_64_get_pteg(
+ struct kvmppc_vcpu_book3s *vcpu_book3s,
+ struct kvmppc_slb *slbe, gva_t eaddr,
+ bool second)
+{
+ u64 hash, pteg, htabsize;
+ u32 page;
+ hva_t r;
+
+ page = kvmppc_mmu_book3s_64_get_page(slbe, eaddr);
+ htabsize = ((1 << ((vcpu_book3s->sdr1 & 0x1f) + 11)) - 1);
+
+ hash = slbe->vsid ^ page;
+ if (second)
+ hash = ~hash;
+ hash &= ((1ULL << 39ULL) - 1ULL);
+ hash &= htabsize;
+ hash <<= 7ULL;
+
+ pteg = vcpu_book3s->sdr1 & 0xfffffffffffc0000ULL;
+ pteg |= hash;
+
+ dprintk("MMU: page=0x%x sdr1=0x%llx pteg=0x%llx vsid=0x%llx\n",
+ page, vcpu_book3s->sdr1, pteg, slbe->vsid);
+
+ r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT);
+ if (kvm_is_error_hva(r))
+ return r;
+ return r | (pteg & ~PAGE_MASK);
+}
+
+static u64 kvmppc_mmu_book3s_64_get_avpn(struct kvmppc_slb *slbe, gva_t eaddr)
+{
+ int p = kvmppc_mmu_book3s_64_get_pagesize(slbe);
+ u64 avpn;
+
+ avpn = kvmppc_mmu_book3s_64_get_page(slbe, eaddr);
+ avpn |= slbe->vsid << (28 - p);
+
+ if (p < 24)
+ avpn >>= ((80 - p) - 56) - 8;
+ else
+ avpn <<= 8;
+
+ return avpn;
+}
+
+static int kvmppc_mmu_book3s_64_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *gpte, bool data)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_slb *slbe;
+ hva_t ptegp;
+ u64 pteg[16];
+ u64 avpn = 0;
+ int i;
+ u8 key = 0;
+ bool found = false;
+ bool perm_err = false;
+ int second = 0;
+
+ slbe = kvmppc_mmu_book3s_64_find_slbe(vcpu_book3s, eaddr);
+ if (!slbe)
+ goto no_seg_found;
+
+do_second:
+ ptegp = kvmppc_mmu_book3s_64_get_pteg(vcpu_book3s, slbe, eaddr, second);
+ if (kvm_is_error_hva(ptegp))
+ goto no_page_found;
+
+ avpn = kvmppc_mmu_book3s_64_get_avpn(slbe, eaddr);
+
+ if(copy_from_user(pteg, (void __user *)ptegp, sizeof(pteg))) {
+ printk(KERN_ERR "KVM can't copy data from 0x%lx!\n", ptegp);
+ goto no_page_found;
+ }
+
+ if ((vcpu->arch.msr & MSR_PR) && slbe->Kp)
+ key = 4;
+ else if (!(vcpu->arch.msr & MSR_PR) && slbe->Ks)
+ key = 4;
+
+ for (i=0; i<16; i+=2) {
+ u64 v = pteg[i];
+ u64 r = pteg[i+1];
+
+ /* Valid check */
+ if (!(v & HPTE_V_VALID))
+ continue;
+ /* Hash check */
+ if ((v & HPTE_V_SECONDARY) != second)
+ continue;
+
+ /* AVPN compare */
+ if (HPTE_V_AVPN_VAL(avpn) == HPTE_V_AVPN_VAL(v)) {
+ u8 pp = (r & HPTE_R_PP) | key;
+ int eaddr_mask = 0xFFF;
+
+ gpte->eaddr = eaddr;
+ gpte->vpage = kvmppc_mmu_book3s_64_ea_to_vp(vcpu,
+ eaddr,
+ data);
+ if (slbe->large)
+ eaddr_mask = 0xFFFFFF;
+ gpte->raddr = (r & HPTE_R_RPN) | (eaddr & eaddr_mask);
+ gpte->may_execute = ((r & HPTE_R_N) ? false : true);
+ gpte->may_read = false;
+ gpte->may_write = false;
+
+ switch (pp) {
+ case 0:
+ case 1:
+ case 2:
+ case 6:
+ gpte->may_write = true;
+ /* fall through */
+ case 3:
+ case 5:
+ case 7:
+ gpte->may_read = true;
+ break;
+ }
+
+ if (!gpte->may_read) {
+ perm_err = true;
+ continue;
+ }
+
+ dprintk("KVM MMU: Translated 0x%lx [0x%llx] -> 0x%llx "
+ "-> 0x%llx\n",
+ eaddr, avpn, gpte->vpage, gpte->raddr);
+ found = true;
+ break;
+ }
+ }
+
+ /* Update PTE R and C bits, so the guest's swapper knows we used the
+ * page */
+ if (found) {
+ u32 oldr = pteg[i+1];
+
+ if (gpte->may_read) {
+ /* Set the accessed flag */
+ pteg[i+1] |= HPTE_R_R;
+ }
+ if (gpte->may_write) {
+ /* Set the dirty flag */
+ pteg[i+1] |= HPTE_R_C;
+ } else {
+ dprintk("KVM: Mapping read-only page!\n");
+ }
+
+ /* Write back into the PTEG */
+ if (pteg[i+1] != oldr)
+ copy_to_user((void __user *)ptegp, pteg, sizeof(pteg));
+
+ return 0;
+ } else {
+ dprintk("KVM MMU: No PTE found (ea=0x%lx sdr1=0x%llx "
+ "ptegp=0x%lx)\n",
+ eaddr, to_book3s(vcpu)->sdr1, ptegp);
+ for (i = 0; i < 16; i += 2)
+ dprintk(" %02d: 0x%llx - 0x%llx (0x%llx)\n",
+ i, pteg[i], pteg[i+1], avpn);
+
+ if (!second) {
+ second = HPTE_V_SECONDARY;
+ goto do_second;
+ }
+ }
+
+
+no_page_found:
+
+
+ if (perm_err)
+ return -EPERM;
+
+ return -ENOENT;
+
+no_seg_found:
+
+ dprintk("KVM MMU: Trigger segment fault\n");
+ return -EINVAL;
+}
+
+static void kvmppc_mmu_book3s_64_slbmte(struct kvm_vcpu *vcpu, u64 rs, u64 rb)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s;
+ u64 esid, esid_1t;
+ int slb_nr;
+ struct kvmppc_slb *slbe;
+
+ dprintk("KVM MMU: slbmte(0x%llx, 0x%llx)\n", rs, rb);
+
+ vcpu_book3s = to_book3s(vcpu);
+
+ esid = GET_ESID(rb);
+ esid_1t = GET_ESID_1T(rb);
+ slb_nr = rb & 0xfff;
+
+ if (slb_nr > vcpu_book3s->slb_nr)
+ return;
+
+ slbe = &vcpu_book3s->slb[slb_nr];
+
+ slbe->large = (rs & SLB_VSID_L) ? 1 : 0;
+ slbe->esid = slbe->large ? esid_1t : esid;
+ slbe->vsid = rs >> 12;
+ slbe->valid = (rb & SLB_ESID_V) ? 1 : 0;
+ slbe->Ks = (rs & SLB_VSID_KS) ? 1 : 0;
+ slbe->Kp = (rs & SLB_VSID_KP) ? 1 : 0;
+ slbe->nx = (rs & SLB_VSID_N) ? 1 : 0;
+ slbe->class = (rs & SLB_VSID_C) ? 1 : 0;
+
+ slbe->orige = rb & (ESID_MASK | SLB_ESID_V);
+ slbe->origv = rs;
+
+ /* Map the new segment */
+ kvmppc_mmu_map_segment(vcpu, esid << SID_SHIFT);
+}
+
+static u64 kvmppc_mmu_book3s_64_slbmfee(struct kvm_vcpu *vcpu, u64 slb_nr)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_slb *slbe;
+
+ if (slb_nr > vcpu_book3s->slb_nr)
+ return 0;
+
+ slbe = &vcpu_book3s->slb[slb_nr];
+
+ return slbe->orige;
+}
+
+static u64 kvmppc_mmu_book3s_64_slbmfev(struct kvm_vcpu *vcpu, u64 slb_nr)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_slb *slbe;
+
+ if (slb_nr > vcpu_book3s->slb_nr)
+ return 0;
+
+ slbe = &vcpu_book3s->slb[slb_nr];
+
+ return slbe->origv;
+}
+
+static void kvmppc_mmu_book3s_64_slbie(struct kvm_vcpu *vcpu, u64 ea)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_slb *slbe;
+
+ dprintk("KVM MMU: slbie(0x%llx)\n", ea);
+
+ slbe = kvmppc_mmu_book3s_64_find_slbe(vcpu_book3s, ea);
+
+ if (!slbe)
+ return;
+
+ dprintk("KVM MMU: slbie(0x%llx, 0x%llx)\n", ea, slbe->esid);
+
+ slbe->valid = false;
+
+ kvmppc_mmu_map_segment(vcpu, ea);
+}
+
+static void kvmppc_mmu_book3s_64_slbia(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ int i;
+
+ dprintk("KVM MMU: slbia()\n");
+
+ for (i = 1; i < vcpu_book3s->slb_nr; i++)
+ vcpu_book3s->slb[i].valid = false;
+
+ if (vcpu->arch.msr & MSR_IR) {
+ kvmppc_mmu_flush_segments(vcpu);
+ kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+ }
+}
+
+static void kvmppc_mmu_book3s_64_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
+ ulong value)
+{
+ u64 rb = 0, rs = 0;
+
+ /* ESID = srnum */
+ rb |= (srnum & 0xf) << 28;
+ /* Set the valid bit */
+ rb |= 1 << 27;
+ /* Index = ESID */
+ rb |= srnum;
+
+ /* VSID = VSID */
+ rs |= (value & 0xfffffff) << 12;
+ /* flags = flags */
+ rs |= ((value >> 27) & 0xf) << 9;
+
+ kvmppc_mmu_book3s_64_slbmte(vcpu, rs, rb);
+}
+
+static void kvmppc_mmu_book3s_64_tlbie(struct kvm_vcpu *vcpu, ulong va,
+ bool large)
+{
+ u64 mask = 0xFFFFFFFFFULL;
+
+ dprintk("KVM MMU: tlbie(0x%lx)\n", va);
+
+ if (large)
+ mask = 0xFFFFFF000ULL;
+ kvmppc_mmu_pte_vflush(vcpu, va >> 12, mask);
+}
+
+static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+ u64 *vsid)
+{
+ switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+ case 0:
+ *vsid = (VSID_REAL >> 16) | esid;
+ break;
+ case MSR_IR:
+ *vsid = (VSID_REAL_IR >> 16) | esid;
+ break;
+ case MSR_DR:
+ *vsid = (VSID_REAL_DR >> 16) | esid;
+ break;
+ case MSR_DR|MSR_IR:
+ {
+ ulong ea;
+ struct kvmppc_slb *slb;
+ ea = esid << SID_SHIFT;
+ slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), ea);
+ if (slb)
+ *vsid = slb->vsid;
+ else
+ return -ENOENT;
+
+ break;
+ }
+ default:
+ BUG();
+ break;
+ }
+
+ return 0;
+}
+
+static bool kvmppc_mmu_book3s_64_is_dcbz32(struct kvm_vcpu *vcpu)
+{
+ return (to_book3s(vcpu)->hid[5] & 0x80);
+}
+
+void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_mmu *mmu = &vcpu->arch.mmu;
+
+ mmu->mfsrin = NULL;
+ mmu->mtsrin = kvmppc_mmu_book3s_64_mtsrin;
+ mmu->slbmte = kvmppc_mmu_book3s_64_slbmte;
+ mmu->slbmfee = kvmppc_mmu_book3s_64_slbmfee;
+ mmu->slbmfev = kvmppc_mmu_book3s_64_slbmfev;
+ mmu->slbie = kvmppc_mmu_book3s_64_slbie;
+ mmu->slbia = kvmppc_mmu_book3s_64_slbia;
+ mmu->xlate = kvmppc_mmu_book3s_64_xlate;
+ mmu->reset_msr = kvmppc_mmu_book3s_64_reset_msr;
+ mmu->tlbie = kvmppc_mmu_book3s_64_tlbie;
+ mmu->esid_to_vsid = kvmppc_mmu_book3s_64_esid_to_vsid;
+ mmu->ea_to_vp = kvmppc_mmu_book3s_64_ea_to_vp;
+ mmu->is_dcbz32 = kvmppc_mmu_book3s_64_is_dcbz32;
+
+ vcpu->arch.hflags |= BOOK3S_HFLAG_SLB;
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ * Alexander Graf <agraf@suse.de>
+ * Kevin Wolf <mail@kevin-wolf.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu-hash64.h>
+#include <asm/machdep.h>
+#include <asm/mmu_context.h>
+#include <asm/hw_irq.h>
+
+#define PTE_SIZE 12
+#define VSID_ALL 0
+
+/* #define DEBUG_MMU */
+/* #define DEBUG_SLB */
+
+#ifdef DEBUG_MMU
+#define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_mmu(a, ...) do { } while(0)
+#endif
+
+#ifdef DEBUG_SLB
+#define dprintk_slb(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_slb(a, ...) do { } while(0)
+#endif
+
+static void invalidate_pte(struct hpte_cache *pte)
+{
+ dprintk_mmu("KVM: Flushing SPT %d: 0x%llx (0x%llx) -> 0x%llx\n",
+ i, pte->pte.eaddr, pte->pte.vpage, pte->host_va);
+
+ ppc_md.hpte_invalidate(pte->slot, pte->host_va,
+ MMU_PAGE_4K, MMU_SEGSIZE_256M,
+ false);
+ pte->host_va = 0;
+ kvm_release_pfn_dirty(pte->pfn);
+}
+
+void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 guest_ea, u64 ea_mask)
+{
+ int i;
+
+ dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%llx & 0x%llx\n",
+ vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
+ BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+ guest_ea &= ea_mask;
+ for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+ struct hpte_cache *pte;
+
+ pte = &vcpu->arch.hpte_cache[i];
+ if (!pte->host_va)
+ continue;
+
+ if ((pte->pte.eaddr & ea_mask) == guest_ea) {
+ invalidate_pte(pte);
+ }
+ }
+
+ /* Doing a complete flush -> start from scratch */
+ if (!ea_mask)
+ vcpu->arch.hpte_cache_offset = 0;
+}
+
+void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
+{
+ int i;
+
+ dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n",
+ vcpu->arch.hpte_cache_offset, guest_vp, vp_mask);
+ BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+ guest_vp &= vp_mask;
+ for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+ struct hpte_cache *pte;
+
+ pte = &vcpu->arch.hpte_cache[i];
+ if (!pte->host_va)
+ continue;
+
+ if ((pte->pte.vpage & vp_mask) == guest_vp) {
+ invalidate_pte(pte);
+ }
+ }
+}
+
+void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end)
+{
+ int i;
+
+ dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n",
+ vcpu->arch.hpte_cache_offset, guest_pa, pa_mask);
+ BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+ for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+ struct hpte_cache *pte;
+
+ pte = &vcpu->arch.hpte_cache[i];
+ if (!pte->host_va)
+ continue;
+
+ if ((pte->pte.raddr >= pa_start) &&
+ (pte->pte.raddr < pa_end)) {
+ invalidate_pte(pte);
+ }
+ }
+}
+
+struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data)
+{
+ int i;
+ u64 guest_vp;
+
+ guest_vp = vcpu->arch.mmu.ea_to_vp(vcpu, ea, false);
+ for (i=0; i<vcpu->arch.hpte_cache_offset; i++) {
+ struct hpte_cache *pte;
+
+ pte = &vcpu->arch.hpte_cache[i];
+ if (!pte->host_va)
+ continue;
+
+ if (pte->pte.vpage == guest_vp)
+ return &pte->pte;
+ }
+
+ return NULL;
+}
+
+static int kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu)
+{
+ if (vcpu->arch.hpte_cache_offset == HPTEG_CACHE_NUM)
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+
+ return vcpu->arch.hpte_cache_offset++;
+}
+
+/* We keep 512 gvsid->hvsid entries, mapping the guest ones to the array using
+ * a hash, so we don't waste cycles on looping */
+static u16 kvmppc_sid_hash(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+ return (u16)(((gvsid >> (SID_MAP_BITS * 7)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 6)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 5)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 4)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 3)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 2)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 1)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 0)) & SID_MAP_MASK));
+}
+
+
+static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+ struct kvmppc_sid_map *map;
+ u16 sid_map_mask;
+
+ if (vcpu->arch.msr & MSR_PR)
+ gvsid |= VSID_PR;
+
+ sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+ map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+ if (map->guest_vsid == gvsid) {
+ dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n",
+ gvsid, map->host_vsid);
+ return map;
+ }
+
+ map = &to_book3s(vcpu)->sid_map[SID_MAP_MASK - sid_map_mask];
+ if (map->guest_vsid == gvsid) {
+ dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n",
+ gvsid, map->host_vsid);
+ return map;
+ }
+
+ dprintk_slb("SLB: Searching 0x%llx -> not found\n", gvsid);
+ return NULL;
+}
+
+int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
+{
+ pfn_t hpaddr;
+ ulong hash, hpteg, va;
+ u64 vsid;
+ int ret;
+ int rflags = 0x192;
+ int vflags = 0;
+ int attempt = 0;
+ struct kvmppc_sid_map *map;
+
+ /* Get host physical address for gpa */
+ hpaddr = gfn_to_pfn(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+ if (kvm_is_error_hva(hpaddr)) {
+ printk(KERN_INFO "Couldn't get guest page for gfn %llx!\n", orig_pte->eaddr);
+ return -EINVAL;
+ }
+ hpaddr <<= PAGE_SHIFT;
+#if PAGE_SHIFT == 12
+#elif PAGE_SHIFT == 16
+ hpaddr |= orig_pte->raddr & 0xf000;
+#else
+#error Unknown page size
+#endif
+
+ /* and write the mapping ea -> hpa into the pt */
+ vcpu->arch.mmu.esid_to_vsid(vcpu, orig_pte->eaddr >> SID_SHIFT, &vsid);
+ map = find_sid_vsid(vcpu, vsid);
+ if (!map) {
+ kvmppc_mmu_map_segment(vcpu, orig_pte->eaddr);
+ map = find_sid_vsid(vcpu, vsid);
+ }
+ BUG_ON(!map);
+
+ vsid = map->host_vsid;
+ va = hpt_va(orig_pte->eaddr, vsid, MMU_SEGSIZE_256M);
+
+ if (!orig_pte->may_write)
+ rflags |= HPTE_R_PP;
+ else
+ mark_page_dirty(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+
+ if (!orig_pte->may_execute)
+ rflags |= HPTE_R_N;
+
+ hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M);
+
+map_again:
+ hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+
+ /* In case we tried normal mapping already, let's nuke old entries */
+ if (attempt > 1)
+ if (ppc_md.hpte_remove(hpteg) < 0)
+ return -1;
+
+ ret = ppc_md.hpte_insert(hpteg, va, hpaddr, rflags, vflags, MMU_PAGE_4K, MMU_SEGSIZE_256M);
+
+ if (ret < 0) {
+ /* If we couldn't map a primary PTE, try a secondary */
+#ifdef USE_SECONDARY
+ hash = ~hash;
+ attempt++;
+ if (attempt % 2)
+ vflags = HPTE_V_SECONDARY;
+ else
+ vflags = 0;
+#else
+ attempt = 2;
+#endif
+ goto map_again;
+ } else {
+ int hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
+ struct hpte_cache *pte = &vcpu->arch.hpte_cache[hpte_id];
+
+ dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%lx (0x%llx) -> %lx\n",
+ ((rflags & HPTE_R_PP) == 3) ? '-' : 'w',
+ (rflags & HPTE_R_N) ? '-' : 'x',
+ orig_pte->eaddr, hpteg, va, orig_pte->vpage, hpaddr);
+
+ pte->slot = hpteg + (ret & 7);
+ pte->host_va = va;
+ pte->pte = *orig_pte;
+ pte->pfn = hpaddr >> PAGE_SHIFT;
+ }
+
+ return 0;
+}
+
+static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+ struct kvmppc_sid_map *map;
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ u16 sid_map_mask;
+ static int backwards_map = 0;
+
+ if (vcpu->arch.msr & MSR_PR)
+ gvsid |= VSID_PR;
+
+ /* We might get collisions that trap in preceding order, so let's
+ map them differently */
+
+ sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+ if (backwards_map)
+ sid_map_mask = SID_MAP_MASK - sid_map_mask;
+
+ map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+
+ /* Make sure we're taking the other map next time */
+ backwards_map = !backwards_map;
+
+ /* Uh-oh ... out of mappings. Let's flush! */
+ if (vcpu_book3s->vsid_next == vcpu_book3s->vsid_max) {
+ vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+ memset(vcpu_book3s->sid_map, 0,
+ sizeof(struct kvmppc_sid_map) * SID_MAP_NUM);
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+ kvmppc_mmu_flush_segments(vcpu);
+ }
+ map->host_vsid = vcpu_book3s->vsid_next++;
+
+ map->guest_vsid = gvsid;
+ map->valid = true;
+
+ return map;
+}
+
+static int kvmppc_mmu_next_segment(struct kvm_vcpu *vcpu, ulong esid)
+{
+ int i;
+ int max_slb_size = 64;
+ int found_inval = -1;
+ int r;
+
+ if (!get_paca()->kvm_slb_max)
+ get_paca()->kvm_slb_max = 1;
+
+ /* Are we overwriting? */
+ for (i = 1; i < get_paca()->kvm_slb_max; i++) {
+ if (!(get_paca()->kvm_slb[i].esid & SLB_ESID_V))
+ found_inval = i;
+ else if ((get_paca()->kvm_slb[i].esid & ESID_MASK) == esid)
+ return i;
+ }
+
+ /* Found a spare entry that was invalidated before */
+ if (found_inval > 0)
+ return found_inval;
+
+ /* No spare invalid entry, so create one */
+
+ if (mmu_slb_size < 64)
+ max_slb_size = mmu_slb_size;
+
+ /* Overflowing -> purge */
+ if ((get_paca()->kvm_slb_max) == max_slb_size)
+ kvmppc_mmu_flush_segments(vcpu);
+
+ r = get_paca()->kvm_slb_max;
+ get_paca()->kvm_slb_max++;
+
+ return r;
+}
+
+int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr)
+{
+ u64 esid = eaddr >> SID_SHIFT;
+ u64 slb_esid = (eaddr & ESID_MASK) | SLB_ESID_V;
+ u64 slb_vsid = SLB_VSID_USER;
+ u64 gvsid;
+ int slb_index;
+ struct kvmppc_sid_map *map;
+
+ slb_index = kvmppc_mmu_next_segment(vcpu, eaddr & ESID_MASK);
+
+ if (vcpu->arch.mmu.esid_to_vsid(vcpu, esid, &gvsid)) {
+ /* Invalidate an entry */
+ get_paca()->kvm_slb[slb_index].esid = 0;
+ return -ENOENT;
+ }
+
+ map = find_sid_vsid(vcpu, gvsid);
+ if (!map)
+ map = create_sid_map(vcpu, gvsid);
+
+ map->guest_esid = esid;
+
+ slb_vsid |= (map->host_vsid << 12);
+ slb_vsid &= ~SLB_VSID_KP;
+ slb_esid |= slb_index;
+
+ get_paca()->kvm_slb[slb_index].esid = slb_esid;
+ get_paca()->kvm_slb[slb_index].vsid = slb_vsid;
+
+ dprintk_slb("slbmte %#llx, %#llx\n", slb_vsid, slb_esid);
+
+ return 0;
+}
+
+void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
+{
+ get_paca()->kvm_slb_max = 1;
+ get_paca()->kvm_slb[0].esid = 0;
+}
+
+void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
+{
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+}
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/exception-64s.h>
+
+/*****************************************************************************
+ * *
+ * Real Mode handlers that need to be in low physical memory *
+ * *
+ ****************************************************************************/
+
+
+.macro INTERRUPT_TRAMPOLINE intno
+
+.global kvmppc_trampoline_\intno
+kvmppc_trampoline_\intno:
+
+ mtspr SPRN_SPRG_SCRATCH0, r13 /* Save r13 */
+
+ /*
+ * First thing to do is to find out if we're coming
+ * from a KVM guest or a Linux process.
+ *
+ * To distinguish, we check a magic byte in the PACA
+ */
+ mfspr r13, SPRN_SPRG_PACA /* r13 = PACA */
+ std r12, (PACA_EXMC + EX_R12)(r13)
+ mfcr r12
+ stw r12, (PACA_EXMC + EX_CCR)(r13)
+ lbz r12, PACA_KVM_IN_GUEST(r13)
+ cmpwi r12, 0
+ bne ..kvmppc_handler_hasmagic_\intno
+ /* No KVM guest? Then jump back to the Linux handler! */
+ lwz r12, (PACA_EXMC + EX_CCR)(r13)
+ mtcr r12
+ ld r12, (PACA_EXMC + EX_R12)(r13)
+ mfspr r13, SPRN_SPRG_SCRATCH0 /* r13 = original r13 */
+ b kvmppc_resume_\intno /* Get back original handler */
+
+ /* Now we know we're handling a KVM guest */
+..kvmppc_handler_hasmagic_\intno:
+ /* Unset guest state */
+ li r12, 0
+ stb r12, PACA_KVM_IN_GUEST(r13)
+
+ std r1, (PACA_EXMC+EX_R9)(r13)
+ std r10, (PACA_EXMC+EX_R10)(r13)
+ std r11, (PACA_EXMC+EX_R11)(r13)
+ std r2, (PACA_EXMC+EX_R13)(r13)
+
+ mfsrr0 r10
+ mfsrr1 r11
+
+ /* Restore R1/R2 so we can handle faults */
+ ld r1, PACAR1(r13)
+ ld r2, (PACA_EXMC+EX_SRR0)(r13)
+
+ /* Let's store which interrupt we're handling */
+ li r12, \intno
+
+ /* Jump into the SLB exit code that goes to the highmem handler */
+ b kvmppc_handler_trampoline_exit
+
+.endm
+
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_SYSTEM_RESET
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_MACHINE_CHECK
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DATA_STORAGE
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DATA_SEGMENT
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_INST_STORAGE
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_INST_SEGMENT
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_EXTERNAL
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_ALIGNMENT
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_PROGRAM
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_FP_UNAVAIL
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DECREMENTER
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_SYSCALL
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_TRACE
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_PERFMON
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_ALTIVEC
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_VSX
+
+/*
+ * This trampoline brings us back to a real mode handler
+ *
+ * Input Registers:
+ *
+ * R6 = SRR0
+ * R7 = SRR1
+ * LR = real-mode IP
+ *
+ */
+.global kvmppc_handler_lowmem_trampoline
+kvmppc_handler_lowmem_trampoline:
+
+ mtsrr0 r6
+ mtsrr1 r7
+ blr
+kvmppc_handler_lowmem_trampoline_end:
+
+.global kvmppc_trampoline_lowmem
+kvmppc_trampoline_lowmem:
+ .long kvmppc_handler_lowmem_trampoline - _stext
+
+.global kvmppc_trampoline_enter
+kvmppc_trampoline_enter:
+ .long kvmppc_handler_trampoline_enter - _stext
+
+#include "book3s_64_slb.S"
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#define SHADOW_SLB_ESID(num) (SLBSHADOW_SAVEAREA + (num * 0x10))
+#define SHADOW_SLB_VSID(num) (SLBSHADOW_SAVEAREA + (num * 0x10) + 0x8)
+#define UNBOLT_SLB_ENTRY(num) \
+ ld r9, SHADOW_SLB_ESID(num)(r12); \
+ /* Invalid? Skip. */; \
+ rldicl. r0, r9, 37, 63; \
+ beq slb_entry_skip_ ## num; \
+ xoris r9, r9, SLB_ESID_V@h; \
+ std r9, SHADOW_SLB_ESID(num)(r12); \
+ slb_entry_skip_ ## num:
+
+#define REBOLT_SLB_ENTRY(num) \
+ ld r10, SHADOW_SLB_ESID(num)(r11); \
+ cmpdi r10, 0; \
+ beq slb_exit_skip_1; \
+ oris r10, r10, SLB_ESID_V@h; \
+ ld r9, SHADOW_SLB_VSID(num)(r11); \
+ slbmte r9, r10; \
+ std r10, SHADOW_SLB_ESID(num)(r11); \
+slb_exit_skip_ ## num:
+
+/******************************************************************************
+ * *
+ * Entry code *
+ * *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_enter
+kvmppc_handler_trampoline_enter:
+
+ /* Required state:
+ *
+ * MSR = ~IR|DR
+ * R13 = PACA
+ * R9 = guest IP
+ * R10 = guest MSR
+ * R11 = free
+ * R12 = free
+ * PACA[PACA_EXMC + EX_R9] = guest R9
+ * PACA[PACA_EXMC + EX_R10] = guest R10
+ * PACA[PACA_EXMC + EX_R11] = guest R11
+ * PACA[PACA_EXMC + EX_R12] = guest R12
+ * PACA[PACA_EXMC + EX_R13] = guest R13
+ * PACA[PACA_EXMC + EX_CCR] = guest CR
+ * PACA[PACA_EXMC + EX_R3] = guest XER
+ */
+
+ mtsrr0 r9
+ mtsrr1 r10
+
+ mtspr SPRN_SPRG_SCRATCH0, r0
+
+ /* Remove LPAR shadow entries */
+
+#if SLB_NUM_BOLTED == 3
+
+ ld r12, PACA_SLBSHADOWPTR(r13)
+
+ /* Save off the first entry so we can slbie it later */
+ ld r10, SHADOW_SLB_ESID(0)(r12)
+ ld r11, SHADOW_SLB_VSID(0)(r12)
+
+ /* Remove bolted entries */
+ UNBOLT_SLB_ENTRY(0)
+ UNBOLT_SLB_ENTRY(1)
+ UNBOLT_SLB_ENTRY(2)
+
+#else
+#error unknown number of bolted entries
+#endif
+
+ /* Flush SLB */
+
+ slbia
+
+ /* r0 = esid & ESID_MASK */
+ rldicr r10, r10, 0, 35
+ /* r0 |= CLASS_BIT(VSID) */
+ rldic r12, r11, 56 - 36, 36
+ or r10, r10, r12
+ slbie r10
+
+ isync
+
+ /* Fill SLB with our shadow */
+
+ lbz r12, PACA_KVM_SLB_MAX(r13)
+ mulli r12, r12, 16
+ addi r12, r12, PACA_KVM_SLB
+ add r12, r12, r13
+
+ /* for (r11 = kvm_slb; r11 < kvm_slb + kvm_slb_size; r11+=slb_entry) */
+ li r11, PACA_KVM_SLB
+ add r11, r11, r13
+
+slb_loop_enter:
+
+ ld r10, 0(r11)
+
+ rldicl. r0, r10, 37, 63
+ beq slb_loop_enter_skip
+
+ ld r9, 8(r11)
+ slbmte r9, r10
+
+slb_loop_enter_skip:
+ addi r11, r11, 16
+ cmpd cr0, r11, r12
+ blt slb_loop_enter
+
+slb_do_enter:
+
+ /* Enter guest */
+
+ mfspr r0, SPRN_SPRG_SCRATCH0
+
+ ld r9, (PACA_EXMC+EX_R9)(r13)
+ ld r10, (PACA_EXMC+EX_R10)(r13)
+ ld r12, (PACA_EXMC+EX_R12)(r13)
+
+ lwz r11, (PACA_EXMC+EX_CCR)(r13)
+ mtcr r11
+
+ ld r11, (PACA_EXMC+EX_R3)(r13)
+ mtxer r11
+
+ ld r11, (PACA_EXMC+EX_R11)(r13)
+ ld r13, (PACA_EXMC+EX_R13)(r13)
+
+ RFI
+kvmppc_handler_trampoline_enter_end:
+
+
+
+/******************************************************************************
+ * *
+ * Exit code *
+ * *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_exit
+kvmppc_handler_trampoline_exit:
+
+ /* Register usage at this point:
+ *
+ * SPRG_SCRATCH0 = guest R13
+ * R01 = host R1
+ * R02 = host R2
+ * R10 = guest PC
+ * R11 = guest MSR
+ * R12 = exit handler id
+ * R13 = PACA
+ * PACA.exmc.CCR = guest CR
+ * PACA.exmc.R9 = guest R1
+ * PACA.exmc.R10 = guest R10
+ * PACA.exmc.R11 = guest R11
+ * PACA.exmc.R12 = guest R12
+ * PACA.exmc.R13 = guest R2
+ *
+ */
+
+ /* Save registers */
+
+ std r0, (PACA_EXMC+EX_SRR0)(r13)
+ std r9, (PACA_EXMC+EX_R3)(r13)
+ std r10, (PACA_EXMC+EX_LR)(r13)
+ std r11, (PACA_EXMC+EX_DAR)(r13)
+
+ /*
+ * In order for us to easily get the last instruction,
+ * we got the #vmexit at, we exploit the fact that the
+ * virtual layout is still the same here, so we can just
+ * ld from the guest's PC address
+ */
+
+ /* We only load the last instruction when it's safe */
+ cmpwi r12, BOOK3S_INTERRUPT_DATA_STORAGE
+ beq ld_last_inst
+ cmpwi r12, BOOK3S_INTERRUPT_PROGRAM
+ beq ld_last_inst
+
+ b no_ld_last_inst
+
+ld_last_inst:
+ /* Save off the guest instruction we're at */
+ /* 1) enable paging for data */
+ mfmsr r9
+ ori r11, r9, MSR_DR /* Enable paging for data */
+ mtmsr r11
+ /* 2) fetch the instruction */
+ lwz r0, 0(r10)
+ /* 3) disable paging again */
+ mtmsr r9
+
+no_ld_last_inst:
+
+ /* Restore bolted entries from the shadow and fix it along the way */
+
+ /* We don't store anything in entry 0, so we don't need to take care of it */
+ slbia
+ isync
+
+#if SLB_NUM_BOLTED == 3
+
+ ld r11, PACA_SLBSHADOWPTR(r13)
+
+ REBOLT_SLB_ENTRY(0)
+ REBOLT_SLB_ENTRY(1)
+ REBOLT_SLB_ENTRY(2)
+
+#else
+#error unknown number of bolted entries
+#endif
+
+slb_do_exit:
+
+ /* Restore registers */
+
+ ld r11, (PACA_EXMC+EX_DAR)(r13)
+ ld r10, (PACA_EXMC+EX_LR)(r13)
+ ld r9, (PACA_EXMC+EX_R3)(r13)
+
+ /* Save last inst */
+ stw r0, (PACA_EXMC+EX_LR)(r13)
+
+ /* Save DAR and DSISR before going to paged mode */
+ mfdar r0
+ std r0, (PACA_EXMC+EX_DAR)(r13)
+ mfdsisr r0
+ stw r0, (PACA_EXMC+EX_DSISR)(r13)
+
+ /* RFI into the highmem handler */
+ mfmsr r0
+ ori r0, r0, MSR_IR|MSR_DR|MSR_RI /* Enable paging */
+ mtsrr1 r0
+ ld r0, PACASAVEDMSR(r13) /* Highmem handler address */
+ mtsrr0 r0
+
+ mfspr r0, SPRN_SPRG_SCRATCH0
+
+ RFI
+kvmppc_handler_trampoline_exit_end:
+
return kvmppc_core_vcpu_translate(vcpu, tr);
}
+int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
+{
+ return -ENOTSUPP;
+}
+
int __init kvmppc_booke_init(void)
{
unsigned long ivor[16];
*/
#include <linux/jiffies.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kvm_host.h>
#include "trace.h"
#define OP_TRAP 3
+#define OP_TRAP_64 2
#define OP_31_XOP_LWZX 23
#define OP_31_XOP_LBZX 87
#define OP_STH 44
#define OP_STHU 45
+#ifdef CONFIG_PPC64
+static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
+{
+ return 1;
+}
+#else
+static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
+{
+ return vcpu->arch.tcr & TCR_DIE;
+}
+#endif
+
void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
{
- if (vcpu->arch.tcr & TCR_DIE) {
+ unsigned long dec_nsec;
+
+ pr_debug("mtDEC: %x\n", vcpu->arch.dec);
+#ifdef CONFIG_PPC64
+ /* POWER4+ triggers a dec interrupt if the value is < 0 */
+ if (vcpu->arch.dec & 0x80000000) {
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+ kvmppc_core_queue_dec(vcpu);
+ return;
+ }
+#endif
+ if (kvmppc_dec_enabled(vcpu)) {
/* The decrementer ticks at the same rate as the timebase, so
* that's how we convert the guest DEC value to the number of
* host ticks. */
- unsigned long nr_jiffies;
- nr_jiffies = vcpu->arch.dec / tb_ticks_per_jiffy;
- mod_timer(&vcpu->arch.dec_timer,
- get_jiffies_64() + nr_jiffies);
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+ dec_nsec = vcpu->arch.dec;
+ dec_nsec *= 1000;
+ dec_nsec /= tb_ticks_per_usec;
+ hrtimer_start(&vcpu->arch.dec_timer, ktime_set(0, dec_nsec),
+ HRTIMER_MODE_REL);
+ vcpu->arch.dec_jiffies = get_tb();
} else {
- del_timer(&vcpu->arch.dec_timer);
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
}
}
/* this default type might be overwritten by subcategories */
kvmppc_set_exit_type(vcpu, EMULATED_INST_EXITS);
+ pr_debug(KERN_INFO "Emulating opcode %d / %d\n", get_op(inst), get_xop(inst));
+
switch (get_op(inst)) {
case OP_TRAP:
+#ifdef CONFIG_PPC64
+ case OP_TRAP_64:
+#else
vcpu->arch.esr |= ESR_PTR;
+#endif
kvmppc_core_queue_program(vcpu);
advance = 0;
break;
case SPRN_SRR1:
vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
case SPRN_PVR:
- vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break;
+ vcpu->arch.gpr[rt] = vcpu->arch.pvr; break;
case SPRN_PIR:
- vcpu->arch.gpr[rt] = mfspr(SPRN_PIR); break;
+ vcpu->arch.gpr[rt] = vcpu->vcpu_id; break;
+ case SPRN_MSSSR0:
+ vcpu->arch.gpr[rt] = 0; break;
/* Note: mftb and TBRL/TBWL are user-accessible, so
* the guest can always access the real TB anyways.
* In fact, we probably will never see these traps. */
case SPRN_TBWL:
- vcpu->arch.gpr[rt] = mftbl(); break;
+ vcpu->arch.gpr[rt] = get_tb() >> 32; break;
case SPRN_TBWU:
- vcpu->arch.gpr[rt] = mftbu(); break;
+ vcpu->arch.gpr[rt] = get_tb(); break;
case SPRN_SPRG0:
vcpu->arch.gpr[rt] = vcpu->arch.sprg0; break;
/* Note: SPRG4-7 are user-readable, so we don't get
* a trap. */
+ case SPRN_DEC:
+ {
+ u64 jd = get_tb() - vcpu->arch.dec_jiffies;
+ vcpu->arch.gpr[rt] = vcpu->arch.dec - jd;
+ pr_debug(KERN_INFO "mfDEC: %x - %llx = %lx\n", vcpu->arch.dec, jd, vcpu->arch.gpr[rt]);
+ break;
+ }
default:
emulated = kvmppc_core_emulate_mfspr(vcpu, sprn, rt);
if (emulated == EMULATE_FAIL) {
case SPRN_TBWL: break;
case SPRN_TBWU: break;
+ case SPRN_MSSSR0: break;
+
case SPRN_DEC:
vcpu->arch.dec = vcpu->arch.gpr[rs];
kvmppc_emulate_dec(vcpu);
#include <linux/kvm_host.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
+#include <linux/hrtimer.h>
#include <linux/fs.h>
#include <asm/cputable.h>
#include <asm/uaccess.h>
int r;
switch (ext) {
+ case KVM_CAP_PPC_SEGSTATE:
+ r = 1;
+ break;
case KVM_CAP_COALESCED_MMIO:
r = KVM_COALESCED_MMIO_PAGE_OFFSET;
break;
}
}
+/*
+ * low level hrtimer wake routine. Because this runs in hardirq context
+ * we schedule a tasklet to do the real work.
+ */
+enum hrtimer_restart kvmppc_decrementer_wakeup(struct hrtimer *timer)
+{
+ struct kvm_vcpu *vcpu;
+
+ vcpu = container_of(timer, struct kvm_vcpu, arch.dec_timer);
+ tasklet_schedule(&vcpu->arch.tasklet);
+
+ return HRTIMER_NORESTART;
+}
+
int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
{
- setup_timer(&vcpu->arch.dec_timer, kvmppc_decrementer_func,
- (unsigned long)vcpu);
+ hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ tasklet_init(&vcpu->arch.tasklet, kvmppc_decrementer_func, (ulong)vcpu);
+ vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup;
return 0;
}
return r;
}
-int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
-{
- return -ENOTSUPP;
-}
-
long kvm_arch_vm_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <asm/time.h>
#include <asm-generic/div64.h>
* Tracepoint for guest mode entry.
*/
TRACE_EVENT(kvm_ppc_instr,
- TP_PROTO(unsigned int inst, unsigned long pc, unsigned int emulate),
- TP_ARGS(inst, pc, emulate),
+ TP_PROTO(unsigned int inst, unsigned long _pc, unsigned int emulate),
+ TP_ARGS(inst, _pc, emulate),
TP_STRUCT__entry(
__field( unsigned int, inst )
TP_fast_assign(
__entry->inst = inst;
- __entry->pc = pc;
+ __entry->pc = _pc;
__entry->emulate = emulate;
),
bdnz 4b
3: mtctr r9
li r7,4
-#if !defined(CONFIG_8xx)
10: dcbz r7,r6
-#else
-10: stw r4, 4(r6)
- stw r4, 8(r6)
- stw r4, 12(r6)
- stw r4, 16(r6)
-#if CACHE_LINE_SIZE >= 32
- stw r4, 20(r6)
- stw r4, 24(r6)
- stw r4, 28(r6)
- stw r4, 32(r6)
-#endif /* CACHE_LINE_SIZE */
-#endif
addi r6,r6,CACHELINE_BYTES
bdnz 10b
clrlwi r5,r8,32-LG_CACHELINE_BYTES
mtctr r0
beq 63f
53:
-#if !defined(CONFIG_8xx)
dcbz r11,r6
-#endif
COPY_16_BYTES
#if L1_CACHE_BYTES >= 32
COPY_16_BYTES
li r11,4
beq 63f
-#ifdef CONFIG_8xx
- /* Don't use prefetch on 8xx */
- mtctr r0
- li r0,0
-53: COPY_16_BYTES_WITHEX(0)
- bdnz 53b
-
-#else /* not CONFIG_8xx */
/* Here we decide how far ahead to prefetch the source */
li r3,4
cmpwi r0,1
li r3,4
li r7,0
bne 114b
-#endif /* CONFIG_8xx */
63: srwi. r0,r5,2
mtctr r0
obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o
obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+ifeq ($(CONFIG_HUGETLB_PAGE),y)
+obj-y += hugetlbpage.o
+obj-$(CONFIG_PPC_STD_MMU_64) += hugetlbpage-hash64.o
+endif
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
obj-$(CONFIG_HIGHMEM) += highmem.o
#include <asm/uaccess.h>
#include <asm/tlbflush.h>
#include <asm/siginfo.h>
-
+#include <mm/mmu_decl.h>
#ifdef CONFIG_KPROBES
static inline int notify_page_fault(struct pt_regs *regs)
goto bad_area;
#endif /* CONFIG_6xx */
#if defined(CONFIG_8xx)
+ /* 8xx sometimes need to load a invalid/non-present TLBs.
+ * These must be invalidated separately as linux mm don't.
+ */
+ if (error_code & 0x40000000) /* no translation? */
+ _tlbil_va(address, 0, 0, 0);
+
/* The MPC8xx seems to always set 0x80000000, which is
* "undefined". Of those that can be set, this is the only
* one which seems bad.
#include "mmu_decl.h"
-extern void loadcam_entry(unsigned int index);
unsigned int tlbcam_index;
-static unsigned long cam[CONFIG_LOWMEM_CAM_NUM];
-#define NUM_TLBCAMS (16)
+#define NUM_TLBCAMS (64)
#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
#endif
-struct tlbcam TLBCAM[NUM_TLBCAMS];
+struct tlbcam {
+ u32 MAS0;
+ u32 MAS1;
+ unsigned long MAS2;
+ u32 MAS3;
+ u32 MAS7;
+} TLBCAM[NUM_TLBCAMS];
struct tlbcamrange {
- unsigned long start;
+ unsigned long start;
unsigned long limit;
phys_addr_t phys;
} tlbcam_addrs[NUM_TLBCAMS];
extern unsigned int tlbcam_index;
+unsigned long tlbcam_sz(int idx)
+{
+ return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
+}
+
/*
* Return PA for this VA if it is mapped by a CAM, or 0
*/
int b;
for (b = 0; b < tlbcam_index; ++b)
if (pa >= tlbcam_addrs[b].phys
- && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+ && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+tlbcam_addrs[b].phys)
return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
return 0;
}
+void loadcam_entry(int idx)
+{
+ mtspr(SPRN_MAS0, TLBCAM[idx].MAS0);
+ mtspr(SPRN_MAS1, TLBCAM[idx].MAS1);
+ mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
+ mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
+
+ if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+ mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
+
+ asm volatile("isync;tlbwe;isync" : : : "memory");
+}
+
/*
* Set up one of the I/D BAT (block address translation) register pairs.
* The parameters are not checked; in particular size must be a power
* of 4 between 4k and 256M.
*/
-void settlbcam(int index, unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags, unsigned int pid)
+static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+ unsigned long size, unsigned long flags, unsigned int pid)
{
unsigned int tsize, lz;
- asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+ asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size));
tsize = 21 - lz;
#ifdef CONFIG_SMP
TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
- TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
+ TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR;
TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
+ if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+ TLBCAM[index].MAS7 = (u64)phys >> 32;
#ifndef CONFIG_KGDB /* want user access for breakpoints */
if (flags & _PAGE_USER) {
loadcam_entry(index);
}
-void invalidate_tlbcam_entry(int index)
-{
- TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
- TLBCAM[index].MAS1 = ~MAS1_VALID;
-
- loadcam_entry(index);
-}
-
-unsigned long __init mmu_mapin_ram(void)
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
{
+ int i;
unsigned long virt = PAGE_OFFSET;
phys_addr_t phys = memstart_addr;
+ unsigned long amount_mapped = 0;
+ unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+
+ /* Convert (4^max) kB to (2^max) bytes */
+ max_cam = max_cam * 2 + 10;
- while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) {
- settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
- virt += cam[tlbcam_index];
- phys += cam[tlbcam_index];
- tlbcam_index++;
+ /* Calculate CAM values */
+ for (i = 0; ram && i < max_cam_idx; i++) {
+ unsigned int camsize = __ilog2(ram) & ~1U;
+ unsigned int align = __ffs(virt | phys) & ~1U;
+ unsigned long cam_sz;
+
+ if (camsize > align)
+ camsize = align;
+ if (camsize > max_cam)
+ camsize = max_cam;
+
+ cam_sz = 1UL << camsize;
+ settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);
+
+ ram -= cam_sz;
+ amount_mapped += cam_sz;
+ virt += cam_sz;
+ phys += cam_sz;
}
+ tlbcam_index = i;
+
+ return amount_mapped;
+}
- return virt - PAGE_OFFSET;
+unsigned long __init mmu_mapin_ram(void)
+{
+ return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
}
/*
flush_instruction_cache();
}
-void __init
-adjust_total_lowmem(void)
+void __init adjust_total_lowmem(void)
{
- phys_addr_t ram;
- unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff;
- char buf[ARRAY_SIZE(cam) * 5 + 1], *p = buf;
+ unsigned long ram;
int i;
- unsigned long virt = PAGE_OFFSET & 0xffffffffUL;
- unsigned long phys = memstart_addr & 0xffffffffUL;
-
- /* Convert (4^max) kB to (2^max) bytes */
- max_cam = max_cam * 2 + 10;
/* adjust lowmem size to __max_low_memory */
ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
- /* Calculate CAM values */
- __max_low_memory = 0;
- for (i = 0; ram && i < ARRAY_SIZE(cam); i++) {
- unsigned int camsize = __ilog2(ram) & ~1U;
- unsigned int align = __ffs(virt | phys) & ~1U;
+ __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
- if (camsize > align)
- camsize = align;
- if (camsize > max_cam)
- camsize = max_cam;
-
- cam[i] = 1UL << camsize;
- ram -= cam[i];
- __max_low_memory += cam[i];
- virt += cam[i];
- phys += cam[i];
-
- p += sprintf(p, "%lu/", cam[i] >> 20);
- }
- for (; i < ARRAY_SIZE(cam); i++)
- p += sprintf(p, "0/");
- p[-1] = '\0';
-
- pr_info("Memory CAM mapping: %s Mb, residual: %dMb\n", buf,
+ pr_info("Memory CAM mapping: ");
+ for (i = 0; i < tlbcam_index - 1; i++)
+ pr_cont("%lu/", tlbcam_sz(i) >> 20);
+ pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20,
(unsigned int)((total_lowmem - __max_low_memory) >> 20));
+
__initial_memory_limit_addr = memstart_addr + __max_low_memory;
}
return 1;
}
-#ifdef CONFIG_HUGETLB_PAGE
-static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
- unsigned long *addr, unsigned long end,
- int write, struct page **pages, int *nr)
-{
- unsigned long mask;
- unsigned long pte_end;
- struct page *head, *page;
- pte_t pte;
- int refs;
-
- pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
- if (pte_end < end)
- end = pte_end;
-
- pte = *ptep;
- mask = _PAGE_PRESENT|_PAGE_USER;
- if (write)
- mask |= _PAGE_RW;
- if ((pte_val(pte) & mask) != mask)
- return 0;
- /* hugepages are never "special" */
- VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
-
- refs = 0;
- head = pte_page(pte);
- page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
- do {
- VM_BUG_ON(compound_head(page) != head);
- pages[*nr] = page;
- (*nr)++;
- page++;
- refs++;
- } while (*addr += PAGE_SIZE, *addr != end);
-
- if (!page_cache_add_speculative(head, refs)) {
- *nr -= refs;
- return 0;
- }
- if (unlikely(pte_val(pte) != pte_val(*ptep))) {
- /* Could be optimized better */
- while (*nr) {
- put_page(page);
- (*nr)--;
- }
- }
-
- return 1;
-}
-#endif /* CONFIG_HUGETLB_PAGE */
-
static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
int write, struct page **pages, int *nr)
{
next = pmd_addr_end(addr, end);
if (pmd_none(pmd))
return 0;
- if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+ if (is_hugepd(pmdp)) {
+ if (!gup_hugepd((hugepd_t *)pmdp, PMD_SHIFT,
+ addr, next, write, pages, nr))
+ return 0;
+ } else if (!gup_pte_range(pmd, addr, next, write, pages, nr))
return 0;
} while (pmdp++, addr = next, addr != end);
next = pud_addr_end(addr, end);
if (pud_none(pud))
return 0;
- if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+ if (is_hugepd(pudp)) {
+ if (!gup_hugepd((hugepd_t *)pudp, PUD_SHIFT,
+ addr, next, write, pages, nr))
+ return 0;
+ } else if (!gup_pmd_range(pud, addr, next, write, pages, nr))
return 0;
} while (pudp++, addr = next, addr != end);
unsigned long next;
pgd_t *pgdp;
int nr = 0;
-#ifdef CONFIG_PPC64
- unsigned int shift;
- int psize;
-#endif
pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
pr_devel(" aligned: %lx .. %lx\n", start, end);
-#ifdef CONFIG_HUGETLB_PAGE
- /* We bail out on slice boundary crossing when hugetlb is
- * enabled in order to not have to deal with two different
- * page table formats
- */
- if (addr < SLICE_LOW_TOP) {
- if (end > SLICE_LOW_TOP)
- goto slow_irqon;
-
- if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
- GET_LOW_SLICE_INDEX(end - 1)))
- goto slow_irqon;
- } else {
- if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
- GET_HIGH_SLICE_INDEX(end - 1)))
- goto slow_irqon;
- }
-#endif /* CONFIG_HUGETLB_PAGE */
-
/*
* XXX: batch / limit 'nr', to avoid large irq off latency
* needs some instrumenting to determine the common sizes used by
*/
local_irq_disable();
-#ifdef CONFIG_PPC64
- /* Those bits are related to hugetlbfs implementation and only exist
- * on 64-bit for now
- */
- psize = get_slice_psize(mm, addr);
- shift = mmu_psize_defs[psize].shift;
-#endif /* CONFIG_PPC64 */
-
-#ifdef CONFIG_HUGETLB_PAGE
- if (unlikely(mmu_huge_psizes[psize])) {
- pte_t *ptep;
- unsigned long a = addr;
- unsigned long sz = ((1UL) << shift);
- struct hstate *hstate = size_to_hstate(sz);
-
- BUG_ON(!hstate);
- /*
- * XXX: could be optimized to avoid hstate
- * lookup entirely (just use shift)
- */
-
- do {
- VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
- ptep = huge_pte_offset(mm, a);
- pr_devel(" %016lx: huge ptep %p\n", a, ptep);
- if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
- &nr))
- goto slow;
- } while (a != end);
- } else
-#endif /* CONFIG_HUGETLB_PAGE */
- {
- pgdp = pgd_offset(mm, addr);
- do {
- pgd_t pgd = *pgdp;
-
-#ifdef CONFIG_PPC64
- VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
-#endif
- pr_devel(" %016lx: normal pgd %p\n", addr,
- (void *)pgd_val(pgd));
- next = pgd_addr_end(addr, end);
- if (pgd_none(pgd))
- goto slow;
- if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ pgdp = pgd_offset(mm, addr);
+ do {
+ pgd_t pgd = *pgdp;
+
+ pr_devel(" %016lx: normal pgd %p\n", addr,
+ (void *)pgd_val(pgd));
+ next = pgd_addr_end(addr, end);
+ if (pgd_none(pgd))
+ goto slow;
+ if (is_hugepd(pgdp)) {
+ if (!gup_hugepd((hugepd_t *)pgdp, PGDIR_SHIFT,
+ addr, next, write, pages, &nr))
goto slow;
- } while (pgdp++, addr = next, addr != end);
- }
+ } else if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ goto slow;
+ } while (pgdp++, addr = next, addr != end);
+
local_irq_enable();
VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
struct hash_pte *htab_address;
unsigned long htab_size_bytes;
unsigned long htab_hash_mask;
+EXPORT_SYMBOL_GPL(htab_hash_mask);
int mmu_linear_psize = MMU_PAGE_4K;
int mmu_virtual_psize = MMU_PAGE_4K;
int mmu_vmalloc_psize = MMU_PAGE_4K;
int mmu_kernel_ssize = MMU_SEGSIZE_256M;
int mmu_highuser_ssize = MMU_SEGSIZE_256M;
u16 mmu_slb_size = 64;
+EXPORT_SYMBOL_GPL(mmu_slb_size);
#ifdef CONFIG_HUGETLB_PAGE
unsigned int HPAGE_SHIFT;
#endif
#ifdef CONFIG_HUGETLB_PAGE
/* Reserve 16G huge page memory sections for huge pages */
of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
-
-/* Set default large page size. Currently, we pick 16M or 1M depending
- * on what is available
- */
- if (mmu_psize_defs[MMU_PAGE_16M].shift)
- HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
- /* With 4k/4level pagetables, we can't (for now) cope with a
- * huge page size < PMD_SIZE */
- else if (mmu_psize_defs[MMU_PAGE_1M].shift)
- HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
#endif /* CONFIG_HUGETLB_PAGE */
}
/* page is dirty */
if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
if (trap == 0x400) {
- __flush_dcache_icache(page_address(page));
+ flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
} else
pp |= HPTE_R_N;
* Result is 0: full permissions, _PAGE_RW: read-only,
* _PAGE_USER or _PAGE_USER|_PAGE_RW: no access.
*/
-static int subpage_protection(pgd_t *pgdir, unsigned long ea)
+static int subpage_protection(struct mm_struct *mm, unsigned long ea)
{
- struct subpage_prot_table *spt = pgd_subpage_prot(pgdir);
+ struct subpage_prot_table *spt = &mm->context.spt;
u32 spp = 0;
u32 **sbpm, *sbpp;
}
#else /* CONFIG_PPC_SUBPAGE_PROT */
-static inline int subpage_protection(pgd_t *pgdir, unsigned long ea)
+static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)
{
return 0;
}
unsigned long vsid;
struct mm_struct *mm;
pte_t *ptep;
+ unsigned hugeshift;
const struct cpumask *tmp;
int rc, user_region = 0, local = 0;
int psize, ssize;
if (user_region && cpumask_equal(mm_cpumask(mm), tmp))
local = 1;
-#ifdef CONFIG_HUGETLB_PAGE
- /* Handle hugepage regions */
- if (HPAGE_SHIFT && mmu_huge_psizes[psize]) {
- DBG_LOW(" -> huge page !\n");
- return hash_huge_page(mm, access, ea, vsid, local, trap);
- }
-#endif /* CONFIG_HUGETLB_PAGE */
-
#ifndef CONFIG_PPC_64K_PAGES
- /* If we use 4K pages and our psize is not 4K, then we are hitting
- * a special driver mapping, we need to align the address before
- * we fetch the PTE
+ /* If we use 4K pages and our psize is not 4K, then we might
+ * be hitting a special driver mapping, and need to align the
+ * address before we fetch the PTE.
+ *
+ * It could also be a hugepage mapping, in which case this is
+ * not necessary, but it's not harmful, either.
*/
if (psize != MMU_PAGE_4K)
ea &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
#endif /* CONFIG_PPC_64K_PAGES */
/* Get PTE and page size from page tables */
- ptep = find_linux_pte(pgdir, ea);
+ ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugeshift);
if (ptep == NULL || !pte_present(*ptep)) {
DBG_LOW(" no PTE !\n");
return 1;
}
+#ifdef CONFIG_HUGETLB_PAGE
+ if (hugeshift)
+ return __hash_page_huge(ea, access, vsid, ptep, trap, local,
+ ssize, hugeshift, psize);
+#endif /* CONFIG_HUGETLB_PAGE */
+
#ifndef CONFIG_PPC_64K_PAGES
DBG_LOW(" i-pte: %016lx\n", pte_val(*ptep));
#else
--- /dev/null
+/*
+ * PPC64 Huge TLB Page Support for hash based MMUs (POWER4 and later)
+ *
+ * Copyright (C) 2003 David Gibson, IBM Corporation.
+ *
+ * Based on the IA-32 version:
+ * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/machdep.h>
+
+int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
+ pte_t *ptep, unsigned long trap, int local, int ssize,
+ unsigned int shift, unsigned int mmu_psize)
+{
+ unsigned long old_pte, new_pte;
+ unsigned long va, rflags, pa, sz;
+ long slot;
+ int err = 1;
+
+ BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
+
+ /* Search the Linux page table for a match with va */
+ va = hpt_va(ea, vsid, ssize);
+
+ /*
+ * Check the user's access rights to the page. If access should be
+ * prevented then send the problem up to do_page_fault.
+ */
+ if (unlikely(access & ~pte_val(*ptep)))
+ goto out;
+ /*
+ * At this point, we have a pte (old_pte) which can be used to build
+ * or update an HPTE. There are 2 cases:
+ *
+ * 1. There is a valid (present) pte with no associated HPTE (this is
+ * the most common case)
+ * 2. There is a valid (present) pte with an associated HPTE. The
+ * current values of the pp bits in the HPTE prevent access
+ * because we are doing software DIRTY bit management and the
+ * page is currently not DIRTY.
+ */
+
+
+ do {
+ old_pte = pte_val(*ptep);
+ if (old_pte & _PAGE_BUSY)
+ goto out;
+ new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+ } while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
+ old_pte, new_pte));
+
+ rflags = 0x2 | (!(new_pte & _PAGE_RW));
+ /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
+ rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
+ sz = ((1UL) << shift);
+ if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ /* No CPU has hugepages but lacks no execute, so we
+ * don't need to worry about that case */
+ rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
+
+ /* Check if pte already has an hpte (case 2) */
+ if (unlikely(old_pte & _PAGE_HASHPTE)) {
+ /* There MIGHT be an HPTE for this pte */
+ unsigned long hash, slot;
+
+ hash = hpt_hash(va, shift, ssize);
+ if (old_pte & _PAGE_F_SECOND)
+ hash = ~hash;
+ slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+ slot += (old_pte & _PAGE_F_GIX) >> 12;
+
+ if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
+ ssize, local) == -1)
+ old_pte &= ~_PAGE_HPTEFLAGS;
+ }
+
+ if (likely(!(old_pte & _PAGE_HASHPTE))) {
+ unsigned long hash = hpt_hash(va, shift, ssize);
+ unsigned long hpte_group;
+
+ pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
+
+repeat:
+ hpte_group = ((hash & htab_hash_mask) *
+ HPTES_PER_GROUP) & ~0x7UL;
+
+ /* clear HPTE slot informations in new PTE */
+#ifdef CONFIG_PPC_64K_PAGES
+ new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
+#else
+ new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
+#endif
+ /* Add in WIMG bits */
+ rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
+ _PAGE_COHERENT | _PAGE_GUARDED));
+
+ /* Insert into the hash table, primary slot */
+ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
+ mmu_psize, ssize);
+
+ /* Primary is full, try the secondary */
+ if (unlikely(slot == -1)) {
+ hpte_group = ((~hash & htab_hash_mask) *
+ HPTES_PER_GROUP) & ~0x7UL;
+ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
+ HPTE_V_SECONDARY,
+ mmu_psize, ssize);
+ if (slot == -1) {
+ if (mftb() & 0x1)
+ hpte_group = ((hash & htab_hash_mask) *
+ HPTES_PER_GROUP)&~0x7UL;
+
+ ppc_md.hpte_remove(hpte_group);
+ goto repeat;
+ }
+ }
+
+ if (unlikely(slot == -2))
+ panic("hash_huge_page: pte_insert failed\n");
+
+ new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
+ }
+
+ /*
+ * No need to use ldarx/stdcx here
+ */
+ *ptep = __pte(new_pte & ~_PAGE_BUSY);
+
+ err = 0;
+
+ out:
+ return err;
+}
* Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
*/
-#include <linux/init.h>
-#include <linux/fs.h>
#include <linux/mm.h>
+#include <linux/io.h>
#include <linux/hugetlb.h>
-#include <linux/pagemap.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/sysctl.h>
-#include <asm/mman.h>
+#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <asm/machdep.h>
-#include <asm/cputable.h>
-#include <asm/spu.h>
#define PAGE_SHIFT_64K 16
#define PAGE_SHIFT_16M 24
#define PAGE_SHIFT_16G 34
-#define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT)
-#define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT)
#define MAX_NUMBER_GPAGES 1024
/* Tracks the 16G pages after the device tree is scanned and before the
static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
static unsigned nr_gpages;
-/* Array of valid huge page sizes - non-zero value(hugepte_shift) is
- * stored for the huge page sizes that are valid.
- */
-unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
-
-#define hugepte_shift mmu_huge_psizes
-#define PTRS_PER_HUGEPTE(psize) (1 << hugepte_shift[psize])
-#define HUGEPTE_TABLE_SIZE(psize) (sizeof(pte_t) << hugepte_shift[psize])
-
-#define HUGEPD_SHIFT(psize) (mmu_psize_to_shift(psize) \
- + hugepte_shift[psize])
-#define HUGEPD_SIZE(psize) (1UL << HUGEPD_SHIFT(psize))
-#define HUGEPD_MASK(psize) (~(HUGEPD_SIZE(psize)-1))
-
-/* Subtract one from array size because we don't need a cache for 4K since
- * is not a huge page size */
-#define HUGE_PGTABLE_INDEX(psize) (HUGEPTE_CACHE_NUM + psize - 1)
-#define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize])
-
-static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
- [MMU_PAGE_64K] = "hugepte_cache_64K",
- [MMU_PAGE_1M] = "hugepte_cache_1M",
- [MMU_PAGE_16M] = "hugepte_cache_16M",
- [MMU_PAGE_16G] = "hugepte_cache_16G",
-};
-
/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad()
* will choke on pointers to hugepte tables, which is handy for
* catching screwups early. */
-#define HUGEPD_OK 0x1
-
-typedef struct { unsigned long pd; } hugepd_t;
-
-#define hugepd_none(hpd) ((hpd).pd == 0)
static inline int shift_to_mmu_psize(unsigned int shift)
{
- switch (shift) {
-#ifndef CONFIG_PPC_64K_PAGES
- case PAGE_SHIFT_64K:
- return MMU_PAGE_64K;
-#endif
- case PAGE_SHIFT_16M:
- return MMU_PAGE_16M;
- case PAGE_SHIFT_16G:
- return MMU_PAGE_16G;
- }
+ int psize;
+
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize)
+ if (mmu_psize_defs[psize].shift == shift)
+ return psize;
return -1;
}
BUG();
}
+#define hugepd_none(hpd) ((hpd).pd == 0)
+
static inline pte_t *hugepd_page(hugepd_t hpd)
{
- BUG_ON(!(hpd.pd & HUGEPD_OK));
- return (pte_t *)(hpd.pd & ~HUGEPD_OK);
+ BUG_ON(!hugepd_ok(hpd));
+ return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | 0xc000000000000000);
+}
+
+static inline unsigned int hugepd_shift(hugepd_t hpd)
+{
+ return hpd.pd & HUGEPD_SHIFT_MASK;
}
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
- struct hstate *hstate)
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift)
{
- unsigned int shift = huge_page_shift(hstate);
- int psize = shift_to_mmu_psize(shift);
- unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1));
+ unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
pte_t *dir = hugepd_page(*hpdp);
return dir + idx;
}
+pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
+{
+ pgd_t *pg;
+ pud_t *pu;
+ pmd_t *pm;
+ hugepd_t *hpdp = NULL;
+ unsigned pdshift = PGDIR_SHIFT;
+
+ if (shift)
+ *shift = 0;
+
+ pg = pgdir + pgd_index(ea);
+ if (is_hugepd(pg)) {
+ hpdp = (hugepd_t *)pg;
+ } else if (!pgd_none(*pg)) {
+ pdshift = PUD_SHIFT;
+ pu = pud_offset(pg, ea);
+ if (is_hugepd(pu))
+ hpdp = (hugepd_t *)pu;
+ else if (!pud_none(*pu)) {
+ pdshift = PMD_SHIFT;
+ pm = pmd_offset(pu, ea);
+ if (is_hugepd(pm))
+ hpdp = (hugepd_t *)pm;
+ else if (!pmd_none(*pm)) {
+ return pte_offset_map(pm, ea);
+ }
+ }
+ }
+
+ if (!hpdp)
+ return NULL;
+
+ if (shift)
+ *shift = hugepd_shift(*hpdp);
+ return hugepte_offset(hpdp, ea, pdshift);
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+ return find_linux_pte_or_hugepte(mm->pgd, addr, NULL);
+}
+
static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
- unsigned long address, unsigned int psize)
+ unsigned long address, unsigned pdshift, unsigned pshift)
{
- pte_t *new = kmem_cache_zalloc(pgtable_cache[HUGE_PGTABLE_INDEX(psize)],
- GFP_KERNEL|__GFP_REPEAT);
+ pte_t *new = kmem_cache_zalloc(PGT_CACHE(pdshift - pshift),
+ GFP_KERNEL|__GFP_REPEAT);
+
+ BUG_ON(pshift > HUGEPD_SHIFT_MASK);
+ BUG_ON((unsigned long)new & HUGEPD_SHIFT_MASK);
if (! new)
return -ENOMEM;
spin_lock(&mm->page_table_lock);
if (!hugepd_none(*hpdp))
- kmem_cache_free(pgtable_cache[HUGE_PGTABLE_INDEX(psize)], new);
+ kmem_cache_free(PGT_CACHE(pdshift - pshift), new);
else
- hpdp->pd = (unsigned long)new | HUGEPD_OK;
+ hpdp->pd = ((unsigned long)new & ~0x8000000000000000) | pshift;
spin_unlock(&mm->page_table_lock);
return 0;
}
-
-static pud_t *hpud_offset(pgd_t *pgd, unsigned long addr, struct hstate *hstate)
-{
- if (huge_page_shift(hstate) < PUD_SHIFT)
- return pud_offset(pgd, addr);
- else
- return (pud_t *) pgd;
-}
-static pud_t *hpud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long addr,
- struct hstate *hstate)
+pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
{
- if (huge_page_shift(hstate) < PUD_SHIFT)
- return pud_alloc(mm, pgd, addr);
- else
- return (pud_t *) pgd;
-}
-static pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
-{
- if (huge_page_shift(hstate) < PMD_SHIFT)
- return pmd_offset(pud, addr);
- else
- return (pmd_t *) pud;
-}
-static pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
- struct hstate *hstate)
-{
- if (huge_page_shift(hstate) < PMD_SHIFT)
- return pmd_alloc(mm, pud, addr);
- else
- return (pmd_t *) pud;
+ pgd_t *pg;
+ pud_t *pu;
+ pmd_t *pm;
+ hugepd_t *hpdp = NULL;
+ unsigned pshift = __ffs(sz);
+ unsigned pdshift = PGDIR_SHIFT;
+
+ addr &= ~(sz-1);
+
+ pg = pgd_offset(mm, addr);
+ if (pshift >= PUD_SHIFT) {
+ hpdp = (hugepd_t *)pg;
+ } else {
+ pdshift = PUD_SHIFT;
+ pu = pud_alloc(mm, pg, addr);
+ if (pshift >= PMD_SHIFT) {
+ hpdp = (hugepd_t *)pu;
+ } else {
+ pdshift = PMD_SHIFT;
+ pm = pmd_alloc(mm, pu, addr);
+ hpdp = (hugepd_t *)pm;
+ }
+ }
+
+ if (!hpdp)
+ return NULL;
+
+ BUG_ON(!hugepd_none(*hpdp) && !hugepd_ok(*hpdp));
+
+ if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, pdshift, pshift))
+ return NULL;
+
+ return hugepte_offset(hpdp, addr, pdshift);
}
/* Build list of addresses of gigantic pages. This function is used in early
return 1;
}
-
-/* Modelled after find_linux_pte() */
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
-{
- pgd_t *pg;
- pud_t *pu;
- pmd_t *pm;
-
- unsigned int psize;
- unsigned int shift;
- unsigned long sz;
- struct hstate *hstate;
- psize = get_slice_psize(mm, addr);
- shift = mmu_psize_to_shift(psize);
- sz = ((1UL) << shift);
- hstate = size_to_hstate(sz);
-
- addr &= hstate->mask;
-
- pg = pgd_offset(mm, addr);
- if (!pgd_none(*pg)) {
- pu = hpud_offset(pg, addr, hstate);
- if (!pud_none(*pu)) {
- pm = hpmd_offset(pu, addr, hstate);
- if (!pmd_none(*pm))
- return hugepte_offset((hugepd_t *)pm, addr,
- hstate);
- }
- }
-
- return NULL;
-}
-
-pte_t *huge_pte_alloc(struct mm_struct *mm,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pg;
- pud_t *pu;
- pmd_t *pm;
- hugepd_t *hpdp = NULL;
- struct hstate *hstate;
- unsigned int psize;
- hstate = size_to_hstate(sz);
-
- psize = get_slice_psize(mm, addr);
- BUG_ON(!mmu_huge_psizes[psize]);
-
- addr &= hstate->mask;
-
- pg = pgd_offset(mm, addr);
- pu = hpud_alloc(mm, pg, addr, hstate);
-
- if (pu) {
- pm = hpmd_alloc(mm, pu, addr, hstate);
- if (pm)
- hpdp = (hugepd_t *)pm;
- }
-
- if (! hpdp)
- return NULL;
-
- if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize))
- return NULL;
-
- return hugepte_offset(hpdp, addr, hstate);
-}
-
int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
{
return 0;
}
-static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp,
- unsigned int psize)
+static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshift,
+ unsigned long start, unsigned long end,
+ unsigned long floor, unsigned long ceiling)
{
pte_t *hugepte = hugepd_page(*hpdp);
+ unsigned shift = hugepd_shift(*hpdp);
+ unsigned long pdmask = ~((1UL << pdshift) - 1);
+
+ start &= pdmask;
+ if (start < floor)
+ return;
+ if (ceiling) {
+ ceiling &= pdmask;
+ if (! ceiling)
+ return;
+ }
+ if (end - 1 > ceiling - 1)
+ return;
hpdp->pd = 0;
tlb->need_flush = 1;
- pgtable_free_tlb(tlb, pgtable_free_cache(hugepte,
- HUGEPTE_CACHE_NUM+psize-1,
- PGF_CACHENUM_MASK));
+ pgtable_free_tlb(tlb, hugepte, pdshift - shift);
}
static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
unsigned long addr, unsigned long end,
- unsigned long floor, unsigned long ceiling,
- unsigned int psize)
+ unsigned long floor, unsigned long ceiling)
{
pmd_t *pmd;
unsigned long next;
next = pmd_addr_end(addr, end);
if (pmd_none(*pmd))
continue;
- free_hugepte_range(tlb, (hugepd_t *)pmd, psize);
+ free_hugepd_range(tlb, (hugepd_t *)pmd, PMD_SHIFT,
+ addr, next, floor, ceiling);
} while (pmd++, addr = next, addr != end);
start &= PUD_MASK;
pud_t *pud;
unsigned long next;
unsigned long start;
- unsigned int shift;
- unsigned int psize = get_slice_psize(tlb->mm, addr);
- shift = mmu_psize_to_shift(psize);
start = addr;
pud = pud_offset(pgd, addr);
do {
next = pud_addr_end(addr, end);
- if (shift < PMD_SHIFT) {
+ if (!is_hugepd(pud)) {
if (pud_none_or_clear_bad(pud))
continue;
hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
- ceiling, psize);
+ ceiling);
} else {
- if (pud_none(*pud))
- continue;
- free_hugepte_range(tlb, (hugepd_t *)pud, psize);
+ free_hugepd_range(tlb, (hugepd_t *)pud, PUD_SHIFT,
+ addr, next, floor, ceiling);
}
} while (pud++, addr = next, addr != end);
{
pgd_t *pgd;
unsigned long next;
- unsigned long start;
/*
- * Comments below take from the normal free_pgd_range(). They
- * apply here too. The tests against HUGEPD_MASK below are
- * essential, because we *don't* test for this at the bottom
- * level. Without them we'll attempt to free a hugepte table
- * when we unmap just part of it, even if there are other
- * active mappings using it.
- *
- * The next few lines have given us lots of grief...
- *
- * Why are we testing HUGEPD* at this top level? Because
- * often there will be no work to do at all, and we'd prefer
- * not to go all the way down to the bottom just to discover
- * that.
- *
- * Why all these "- 1"s? Because 0 represents both the bottom
- * of the address space and the top of it (using -1 for the
- * top wouldn't help much: the masks would do the wrong thing).
- * The rule is that addr 0 and floor 0 refer to the bottom of
- * the address space, but end 0 and ceiling 0 refer to the top
- * Comparisons need to use "end - 1" and "ceiling - 1" (though
- * that end 0 case should be mythical).
+ * Because there are a number of different possible pagetable
+ * layouts for hugepage ranges, we limit knowledge of how
+ * things should be laid out to the allocation path
+ * (huge_pte_alloc(), above). Everything else works out the
+ * structure as it goes from information in the hugepd
+ * pointers. That means that we can't here use the
+ * optimization used in the normal page free_pgd_range(), of
+ * checking whether we're actually covering a large enough
+ * range to have to do anything at the top level of the walk
+ * instead of at the bottom.
*
- * Wherever addr is brought up or ceiling brought down, we
- * must be careful to reject "the opposite 0" before it
- * confuses the subsequent tests. But what about where end is
- * brought down by HUGEPD_SIZE below? no, end can't go down to
- * 0 there.
- *
- * Whereas we round start (addr) and ceiling down, by different
- * masks at different levels, in order to test whether a table
- * now has no other vmas using it, so can be freed, we don't
- * bother to round floor or end up - the tests don't need that.
+ * To make sense of this, you should probably go read the big
+ * block comment at the top of the normal free_pgd_range(),
+ * too.
*/
- unsigned int psize = get_slice_psize(tlb->mm, addr);
-
- addr &= HUGEPD_MASK(psize);
- if (addr < floor) {
- addr += HUGEPD_SIZE(psize);
- if (!addr)
- return;
- }
- if (ceiling) {
- ceiling &= HUGEPD_MASK(psize);
- if (!ceiling)
- return;
- }
- if (end - 1 > ceiling - 1)
- end -= HUGEPD_SIZE(psize);
- if (addr > end - 1)
- return;
- start = addr;
pgd = pgd_offset(tlb->mm, addr);
do {
- psize = get_slice_psize(tlb->mm, addr);
- BUG_ON(!mmu_huge_psizes[psize]);
next = pgd_addr_end(addr, end);
- if (mmu_psize_to_shift(psize) < PUD_SHIFT) {
+ if (!is_hugepd(pgd)) {
if (pgd_none_or_clear_bad(pgd))
continue;
hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
} else {
- if (pgd_none(*pgd))
- continue;
- free_hugepte_range(tlb, (hugepd_t *)pgd, psize);
+ free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT,
+ addr, next, floor, ceiling);
}
} while (pgd++, addr = next, addr != end);
}
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
- if (pte_present(*ptep)) {
- /* We open-code pte_clear because we need to pass the right
- * argument to hpte_need_flush (huge / !huge). Might not be
- * necessary anymore if we make hpte_need_flush() get the
- * page size from the slices
- */
- unsigned int psize = get_slice_psize(mm, addr);
- unsigned int shift = mmu_psize_to_shift(psize);
- unsigned long sz = ((1UL) << shift);
- struct hstate *hstate = size_to_hstate(sz);
- pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1);
- }
- *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
-}
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
- return __pte(old);
-}
-
struct page *
follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
{
pte_t *ptep;
struct page *page;
- unsigned int mmu_psize = get_slice_psize(mm, address);
+ unsigned shift;
+ unsigned long mask;
+
+ ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
/* Verify it is a huge page else bail. */
- if (!mmu_huge_psizes[mmu_psize])
+ if (!ptep || !shift)
return ERR_PTR(-EINVAL);
- ptep = huge_pte_offset(mm, address);
+ mask = (1UL << shift) - 1;
page = pte_page(*ptep);
- if (page) {
- unsigned int shift = mmu_psize_to_shift(mmu_psize);
- unsigned long sz = ((1UL) << shift);
- page += (address % sz) / PAGE_SIZE;
- }
+ if (page)
+ page += (address & mask) / PAGE_SIZE;
return page;
}
return NULL;
}
+static noinline int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr,
+ unsigned long end, int write, struct page **pages, int *nr)
+{
+ unsigned long mask;
+ unsigned long pte_end;
+ struct page *head, *page;
+ pte_t pte;
+ int refs;
+
+ pte_end = (addr + sz) & ~(sz-1);
+ if (pte_end < end)
+ end = pte_end;
+
+ pte = *ptep;
+ mask = _PAGE_PRESENT | _PAGE_USER;
+ if (write)
+ mask |= _PAGE_RW;
+
+ if ((pte_val(pte) & mask) != mask)
+ return 0;
+
+ /* hugepages are never "special" */
+ VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+ refs = 0;
+ head = pte_page(pte);
+
+ page = head + ((addr & (sz-1)) >> PAGE_SHIFT);
+ do {
+ VM_BUG_ON(compound_head(page) != head);
+ pages[*nr] = page;
+ (*nr)++;
+ page++;
+ refs++;
+ } while (addr += PAGE_SIZE, addr != end);
+
+ if (!page_cache_add_speculative(head, refs)) {
+ *nr -= refs;
+ return 0;
+ }
+
+ if (unlikely(pte_val(pte) != pte_val(*ptep))) {
+ /* Could be optimized better */
+ while (*nr) {
+ put_page(page);
+ (*nr)--;
+ }
+ }
+
+ return 1;
+}
+
+static unsigned long hugepte_addr_end(unsigned long addr, unsigned long end,
+ unsigned long sz)
+{
+ unsigned long __boundary = (addr + sz) & ~(sz-1);
+ return (__boundary - 1 < end - 1) ? __boundary : end;
+}
+
+int gup_hugepd(hugepd_t *hugepd, unsigned pdshift,
+ unsigned long addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ pte_t *ptep;
+ unsigned long sz = 1UL << hugepd_shift(*hugepd);
+ unsigned long next;
+
+ ptep = hugepte_offset(hugepd, addr, pdshift);
+ do {
+ next = hugepte_addr_end(addr, end, sz);
+ if (!gup_hugepte(ptep, sz, addr, end, write, pages, nr))
+ return 0;
+ } while (ptep++, addr = next, addr != end);
+
+ return 1;
+}
unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
unsigned long len, unsigned long pgoff,
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
- if (!mmu_huge_psizes[mmu_psize])
- return -EINVAL;
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
}
return 1UL << mmu_psize_to_shift(psize);
}
-/*
- * Called by asm hashtable.S for doing lazy icache flush
- */
-static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
- pte_t pte, int trap, unsigned long sz)
+static int __init add_huge_page_size(unsigned long long size)
{
- struct page *page;
- int i;
-
- if (!pfn_valid(pte_pfn(pte)))
- return rflags;
-
- page = pte_page(pte);
-
- /* page is dirty */
- if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
- if (trap == 0x400) {
- for (i = 0; i < (sz / PAGE_SIZE); i++)
- __flush_dcache_icache(page_address(page+i));
- set_bit(PG_arch_1, &page->flags);
- } else {
- rflags |= HPTE_R_N;
- }
- }
- return rflags;
-}
+ int shift = __ffs(size);
+ int mmu_psize;
-int hash_huge_page(struct mm_struct *mm, unsigned long access,
- unsigned long ea, unsigned long vsid, int local,
- unsigned long trap)
-{
- pte_t *ptep;
- unsigned long old_pte, new_pte;
- unsigned long va, rflags, pa, sz;
- long slot;
- int err = 1;
- int ssize = user_segment_size(ea);
- unsigned int mmu_psize;
- int shift;
- mmu_psize = get_slice_psize(mm, ea);
-
- if (!mmu_huge_psizes[mmu_psize])
- goto out;
- ptep = huge_pte_offset(mm, ea);
-
- /* Search the Linux page table for a match with va */
- va = hpt_va(ea, vsid, ssize);
+ /* Check that it is a page size supported by the hardware and
+ * that it fits within pagetable and slice limits. */
+ if (!is_power_of_2(size)
+ || (shift > SLICE_HIGH_SHIFT) || (shift <= PAGE_SHIFT))
+ return -EINVAL;
- /*
- * If no pte found or not present, send the problem up to
- * do_page_fault
- */
- if (unlikely(!ptep || pte_none(*ptep)))
- goto out;
+ if ((mmu_psize = shift_to_mmu_psize(shift)) < 0)
+ return -EINVAL;
- /*
- * Check the user's access rights to the page. If access should be
- * prevented then send the problem up to do_page_fault.
+#ifdef CONFIG_SPU_FS_64K_LS
+ /* Disable support for 64K huge pages when 64K SPU local store
+ * support is enabled as the current implementation conflicts.
*/
- if (unlikely(access & ~pte_val(*ptep)))
- goto out;
- /*
- * At this point, we have a pte (old_pte) which can be used to build
- * or update an HPTE. There are 2 cases:
- *
- * 1. There is a valid (present) pte with no associated HPTE (this is
- * the most common case)
- * 2. There is a valid (present) pte with an associated HPTE. The
- * current values of the pp bits in the HPTE prevent access
- * because we are doing software DIRTY bit management and the
- * page is currently not DIRTY.
- */
-
-
- do {
- old_pte = pte_val(*ptep);
- if (old_pte & _PAGE_BUSY)
- goto out;
- new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
- } while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
- old_pte, new_pte));
-
- rflags = 0x2 | (!(new_pte & _PAGE_RW));
- /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
- rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
- shift = mmu_psize_to_shift(mmu_psize);
- sz = ((1UL) << shift);
- if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
- /* No CPU has hugepages but lacks no execute, so we
- * don't need to worry about that case */
- rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte),
- trap, sz);
-
- /* Check if pte already has an hpte (case 2) */
- if (unlikely(old_pte & _PAGE_HASHPTE)) {
- /* There MIGHT be an HPTE for this pte */
- unsigned long hash, slot;
-
- hash = hpt_hash(va, shift, ssize);
- if (old_pte & _PAGE_F_SECOND)
- hash = ~hash;
- slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
- slot += (old_pte & _PAGE_F_GIX) >> 12;
-
- if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
- ssize, local) == -1)
- old_pte &= ~_PAGE_HPTEFLAGS;
- }
-
- if (likely(!(old_pte & _PAGE_HASHPTE))) {
- unsigned long hash = hpt_hash(va, shift, ssize);
- unsigned long hpte_group;
-
- pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
-
-repeat:
- hpte_group = ((hash & htab_hash_mask) *
- HPTES_PER_GROUP) & ~0x7UL;
-
- /* clear HPTE slot informations in new PTE */
-#ifdef CONFIG_PPC_64K_PAGES
- new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
-#else
- new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-#endif
- /* Add in WIMG bits */
- rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
- _PAGE_COHERENT | _PAGE_GUARDED));
-
- /* Insert into the hash table, primary slot */
- slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
- mmu_psize, ssize);
-
- /* Primary is full, try the secondary */
- if (unlikely(slot == -1)) {
- hpte_group = ((~hash & htab_hash_mask) *
- HPTES_PER_GROUP) & ~0x7UL;
- slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
- HPTE_V_SECONDARY,
- mmu_psize, ssize);
- if (slot == -1) {
- if (mftb() & 0x1)
- hpte_group = ((hash & htab_hash_mask) *
- HPTES_PER_GROUP)&~0x7UL;
-
- ppc_md.hpte_remove(hpte_group);
- goto repeat;
- }
- }
-
- if (unlikely(slot == -2))
- panic("hash_huge_page: pte_insert failed\n");
-
- new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
- }
+ if (shift == PAGE_SHIFT_64K)
+ return -EINVAL;
+#endif /* CONFIG_SPU_FS_64K_LS */
- /*
- * No need to use ldarx/stdcx here
- */
- *ptep = __pte(new_pte & ~_PAGE_BUSY);
+ BUG_ON(mmu_psize_defs[mmu_psize].shift != shift);
- err = 0;
+ /* Return if huge page size has already been setup */
+ if (size_to_hstate(size))
+ return 0;
- out:
- return err;
-}
+ hugetlb_add_hstate(shift - PAGE_SHIFT);
-static void __init set_huge_psize(int psize)
-{
- /* Check that it is a page size supported by the hardware and
- * that it fits within pagetable limits. */
- if (mmu_psize_defs[psize].shift &&
- mmu_psize_defs[psize].shift < SID_SHIFT_1T &&
- (mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
- mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
- mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
- /* Return if huge page size has already been setup or is the
- * same as the base page size. */
- if (mmu_huge_psizes[psize] ||
- mmu_psize_defs[psize].shift == PAGE_SHIFT)
- return;
- if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL))
- return;
- hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
-
- switch (mmu_psize_defs[psize].shift) {
- case PAGE_SHIFT_64K:
- /* We only allow 64k hpages with 4k base page,
- * which was checked above, and always put them
- * at the PMD */
- hugepte_shift[psize] = PMD_SHIFT;
- break;
- case PAGE_SHIFT_16M:
- /* 16M pages can be at two different levels
- * of pagestables based on base page size */
- if (PAGE_SHIFT == PAGE_SHIFT_64K)
- hugepte_shift[psize] = PMD_SHIFT;
- else /* 4k base page */
- hugepte_shift[psize] = PUD_SHIFT;
- break;
- case PAGE_SHIFT_16G:
- /* 16G pages are always at PGD level */
- hugepte_shift[psize] = PGDIR_SHIFT;
- break;
- }
- hugepte_shift[psize] -= mmu_psize_defs[psize].shift;
- } else
- hugepte_shift[psize] = 0;
+ return 0;
}
static int __init hugepage_setup_sz(char *str)
{
unsigned long long size;
- int mmu_psize;
- int shift;
size = memparse(str, &str);
- shift = __ffs(size);
- mmu_psize = shift_to_mmu_psize(shift);
- if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift)
- set_huge_psize(mmu_psize);
- else
+ if (add_huge_page_size(size) != 0)
printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
return 1;
static int __init hugetlbpage_init(void)
{
- unsigned int psize;
+ int psize;
if (!cpu_has_feature(CPU_FTR_16M_PAGE))
return -ENODEV;
- /* Add supported huge page sizes. Need to change HUGE_MAX_HSTATE
- * and adjust PTE_NONCACHE_NUM if the number of supported huge page
- * sizes changes.
- */
- set_huge_psize(MMU_PAGE_16M);
- set_huge_psize(MMU_PAGE_16G);
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+ unsigned shift;
+ unsigned pdshift;
- /* Temporarily disable support for 64K huge pages when 64K SPU local
- * store support is enabled as the current implementation conflicts.
- */
-#ifndef CONFIG_SPU_FS_64K_LS
- set_huge_psize(MMU_PAGE_64K);
-#endif
+ if (!mmu_psize_defs[psize].shift)
+ continue;
- for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
- if (mmu_huge_psizes[psize]) {
- pgtable_cache[HUGE_PGTABLE_INDEX(psize)] =
- kmem_cache_create(
- HUGEPTE_CACHE_NAME(psize),
- HUGEPTE_TABLE_SIZE(psize),
- HUGEPTE_TABLE_SIZE(psize),
- 0,
- NULL);
- if (!pgtable_cache[HUGE_PGTABLE_INDEX(psize)])
- panic("hugetlbpage_init(): could not create %s"\
- "\n", HUGEPTE_CACHE_NAME(psize));
- }
+ shift = mmu_psize_to_shift(psize);
+
+ if (add_huge_page_size(1ULL << shift) < 0)
+ continue;
+
+ if (shift < PMD_SHIFT)
+ pdshift = PMD_SHIFT;
+ else if (shift < PUD_SHIFT)
+ pdshift = PUD_SHIFT;
+ else
+ pdshift = PGDIR_SHIFT;
+
+ pgtable_cache_add(pdshift - shift, NULL);
+ if (!PGT_CACHE(pdshift - shift))
+ panic("hugetlbpage_init(): could not create "
+ "pgtable cache for %d bit pagesize\n", shift);
}
+ /* Set default large page size. Currently, we pick 16M or 1M
+ * depending on what is available
+ */
+ if (mmu_psize_defs[MMU_PAGE_16M].shift)
+ HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
+ else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+ HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
+
return 0;
}
module_init(hugetlbpage_init);
+
+void flush_dcache_icache_hugepage(struct page *page)
+{
+ int i;
+
+ BUG_ON(!PageCompound(page));
+
+ for (i = 0; i < (1UL << compound_order(page)); i++)
+ __flush_dcache_icache(page_address(page+i));
+}
#include <linux/module.h>
#include <linux/poison.h>
#include <linux/lmb.h>
+#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
memset(addr, 0, PMD_TABLE_SIZE);
}
-static const unsigned int pgtable_cache_size[2] = {
- PGD_TABLE_SIZE, PMD_TABLE_SIZE
-};
-static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
-#ifdef CONFIG_PPC_64K_PAGES
- "pgd_cache", "pmd_cache",
-#else
- "pgd_cache", "pud_pmd_cache",
-#endif /* CONFIG_PPC_64K_PAGES */
-};
-
-#ifdef CONFIG_HUGETLB_PAGE
-/* Hugepages need an extra cache per hugepagesize, initialized in
- * hugetlbpage.c. We can't put into the tables above, because HPAGE_SHIFT
- * is not compile time constant. */
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT];
-#else
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
-#endif
+struct kmem_cache *pgtable_cache[MAX_PGTABLE_INDEX_SIZE];
+
+/*
+ * Create a kmem_cache() for pagetables. This is not used for PTE
+ * pages - they're linked to struct page, come from the normal free
+ * pages pool and have a different entry size (see real_pte_t) to
+ * everything else. Caches created by this function are used for all
+ * the higher level pagetables, and for hugepage pagetables.
+ */
+void pgtable_cache_add(unsigned shift, void (*ctor)(void *))
+{
+ char *name;
+ unsigned long table_size = sizeof(void *) << shift;
+ unsigned long align = table_size;
+
+ /* When batching pgtable pointers for RCU freeing, we store
+ * the index size in the low bits. Table alignment must be
+ * big enough to fit it.
+ *
+ * Likewise, hugeapge pagetable pointers contain a (different)
+ * shift value in the low bits. All tables must be aligned so
+ * as to leave enough 0 bits in the address to contain it. */
+ unsigned long minalign = max(MAX_PGTABLE_INDEX_SIZE + 1,
+ HUGEPD_SHIFT_MASK + 1);
+ struct kmem_cache *new;
+
+ /* It would be nice if this was a BUILD_BUG_ON(), but at the
+ * moment, gcc doesn't seem to recognize is_power_of_2 as a
+ * constant expression, so so much for that. */
+ BUG_ON(!is_power_of_2(minalign));
+ BUG_ON((shift < 1) || (shift > MAX_PGTABLE_INDEX_SIZE));
+
+ if (PGT_CACHE(shift))
+ return; /* Already have a cache of this size */
+
+ align = max_t(unsigned long, align, minalign);
+ name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift);
+ new = kmem_cache_create(name, table_size, align, 0, ctor);
+ PGT_CACHE(shift) = new;
+
+ pr_debug("Allocated pgtable cache for order %d\n", shift);
+}
+
void pgtable_cache_init(void)
{
- pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
- pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
+ pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor);
+ pgtable_cache_add(PMD_INDEX_SIZE, pmd_ctor);
+ if (!PGT_CACHE(PGD_INDEX_SIZE) || !PGT_CACHE(PMD_INDEX_SIZE))
+ panic("Couldn't allocate pgtable caches");
+
+ /* In all current configs, when the PUD index exists it's the
+ * same size as either the pgd or pmd index. Verify that the
+ * initialization above has also created a PUD cache. This
+ * will need re-examiniation if we add new possibilities for
+ * the pagetable layout. */
+ BUG_ON(PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE));
}
#ifdef CONFIG_SPARSEMEM_VMEMMAP
#include <linux/pagemap.h>
#include <linux/suspend.h>
#include <linux/lmb.h>
+#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
void flush_dcache_icache_page(struct page *page)
{
+#ifdef CONFIG_HUGETLB_PAGE
+ if (PageCompound(page)) {
+ flush_dcache_icache_hugepage(page);
+ return;
+ }
+#endif
#ifdef CONFIG_BOOKE
- void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
- __flush_dcache_icache(start);
- kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+ {
+ void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
+ __flush_dcache_icache(start);
+ kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+ }
#elif defined(CONFIG_8xx) || defined(CONFIG_PPC64)
/* On 8xx there is no need to kmap since highmem is not supported */
__flush_dcache_icache(page_address(page));
#else
__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
#endif
-
}
+
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
clear_page(page);
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
+#include <linux/module.h>
#include <asm/mmu_context.h>
#define NO_CONTEXT 0
#define MAX_CONTEXT ((1UL << 19) - 1)
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+int __init_new_context(void)
{
int index;
int err;
return -ENOMEM;
}
+ return index;
+}
+EXPORT_SYMBOL_GPL(__init_new_context);
+
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ int index;
+
+ index = __init_new_context();
+ if (index < 0)
+ return index;
+
/* The old code would re-promote on fork, we don't do that
* when using slices as it could cause problem promoting slices
* that have been forced down to 4K
*/
if (slice_mm_new_context(mm))
slice_set_user_psize(mm, mmu_virtual_psize);
+ subpage_prot_init_new_context(mm);
mm->context.id = index;
return 0;
}
-void destroy_context(struct mm_struct *mm)
+void __destroy_context(int context_id)
{
spin_lock(&mmu_context_lock);
- idr_remove(&mmu_context_idr, mm->context.id);
+ idr_remove(&mmu_context_idr, context_id);
spin_unlock(&mmu_context_lock);
+}
+EXPORT_SYMBOL_GPL(__destroy_context);
+void destroy_context(struct mm_struct *mm)
+{
+ __destroy_context(mm->context.id);
+ subpage_prot_free(mm);
mm->context.id = NO_CONTEXT;
}
#ifdef CONFIG_PPC32
-struct tlbcam {
- u32 MAS0;
- u32 MAS1;
- u32 MAS2;
- u32 MAS3;
- u32 MAS7;
-};
-
extern void mapin_ram(void);
extern int map_page(unsigned long va, phys_addr_t pa, int flags);
extern void setbat(int index, unsigned long virt, phys_addr_t phys,
unsigned int size, int flags);
-extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags, unsigned int pid);
-extern void invalidate_tlbcam_entry(int index);
extern int __map_without_bats;
extern unsigned long ioremap_base;
{
struct rcu_head rcu;
unsigned int index;
- pgtable_free_t tables[0];
+ unsigned long tables[0];
};
#define PTE_FREELIST_SIZE \
((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \
- / sizeof(pgtable_free_t))
+ / sizeof(unsigned long))
static void pte_free_smp_sync(void *arg)
{
/* This is only called when we are critically out of memory
* (and fail to get a page in pte_free_tlb).
*/
-static void pgtable_free_now(pgtable_free_t pgf)
+static void pgtable_free_now(void *table, unsigned shift)
{
pte_freelist_forced_free++;
smp_call_function(pte_free_smp_sync, NULL, 1);
- pgtable_free(pgf);
+ pgtable_free(table, shift);
}
static void pte_free_rcu_callback(struct rcu_head *head)
container_of(head, struct pte_freelist_batch, rcu);
unsigned int i;
- for (i = 0; i < batch->index; i++)
- pgtable_free(batch->tables[i]);
+ for (i = 0; i < batch->index; i++) {
+ void *table = (void *)(batch->tables[i] & ~MAX_PGTABLE_INDEX_SIZE);
+ unsigned shift = batch->tables[i] & MAX_PGTABLE_INDEX_SIZE;
+
+ pgtable_free(table, shift);
+ }
free_page((unsigned long)batch);
}
call_rcu(&batch->rcu, pte_free_rcu_callback);
}
-void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
{
/* This is safe since tlb_gather_mmu has disabled preemption */
struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur);
+ unsigned long pgf;
if (atomic_read(&tlb->mm->mm_users) < 2 ||
cpumask_equal(mm_cpumask(tlb->mm), cpumask_of(smp_processor_id()))){
- pgtable_free(pgf);
+ pgtable_free(table, shift);
return;
}
if (*batchp == NULL) {
*batchp = (struct pte_freelist_batch *)__get_free_page(GFP_ATOMIC);
if (*batchp == NULL) {
- pgtable_free_now(pgf);
+ pgtable_free_now(table, shift);
return;
}
(*batchp)->index = 0;
}
+ BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE);
+ pgf = (unsigned long)table | shift;
(*batchp)->tables[(*batchp)->index++] = pgf;
if ((*batchp)->index == PTE_FREELIST_SIZE) {
pte_free_submit(*batchp);
* Also makes sure that the subpage_prot_table structure is
* reinitialized for the next user.
*/
-void subpage_prot_free(pgd_t *pgd)
+void subpage_prot_free(struct mm_struct *mm)
{
- struct subpage_prot_table *spt = pgd_subpage_prot(pgd);
+ struct subpage_prot_table *spt = &mm->context.spt;
unsigned long i, j, addr;
u32 **p;
spt->maxaddr = 0;
}
+void subpage_prot_init_new_context(struct mm_struct *mm)
+{
+ struct subpage_prot_table *spt = &mm->context.spt;
+
+ memset(spt, 0, sizeof(*spt));
+}
+
static void hpte_flush_range(struct mm_struct *mm, unsigned long addr,
int npages)
{
static void subpage_prot_clear(unsigned long addr, unsigned long len)
{
struct mm_struct *mm = current->mm;
- struct subpage_prot_table *spt = pgd_subpage_prot(mm->pgd);
+ struct subpage_prot_table *spt = &mm->context.spt;
u32 **spm, *spp;
int i, nw;
unsigned long next, limit;
long sys_subpage_prot(unsigned long addr, unsigned long len, u32 __user *map)
{
struct mm_struct *mm = current->mm;
- struct subpage_prot_table *spt = pgd_subpage_prot(mm->pgd);
+ struct subpage_prot_table *spt = &mm->context.spt;
u32 **spm, *spp;
int i, nw;
unsigned long next, limit;
i = batch->index;
- /* We mask the address for the base page size. Huge pages will
- * have applied their own masking already
- */
- addr &= PAGE_MASK;
-
/* Get page size (maybe move back to caller).
*
* NOTE: when using special 64K mappings in 4K environment like
} else
psize = pte_pagesize_index(mm, addr, pte);
+ /* Mask the address for the correct page size */
+ addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
+
/* Build full vaddr */
if (!is_kernel_addr(addr)) {
ssize = user_segment_size(addr);
}
static struct irq_chip cpld_pic = {
- .typename = " CPLD PIC ",
+ .name = " CPLD PIC ",
.mask = cpld_mask_irq,
.ack = cpld_mask_irq,
.unmask = cpld_unmask_irq,
cpld_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq);
return 0;
}
select GENERIC_GPIO
help
Enable gpiolib support for mpc5200 based boards
+
+config PPC_MPC5200_LPBFIFO
+ tristate "MPC5200 LocalPlus bus FIFO driver"
+ depends on PPC_MPC52xx
+ select PPC_BESTCOMM_GEN_BD
endif
obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o
+obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o
}
static struct irq_chip media5200_irq_chip = {
- .typename = "Media5200 FPGA",
+ .name = "Media5200 FPGA",
.unmask = media5200_irq_unmask,
.mask = media5200_irq_mask,
.mask_ack = media5200_irq_mask,
static int media5200_irq_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
pr_debug("%s: h=%p, virq=%i, hwirq=%i\n", __func__, h, virq, (int)hw);
set_irq_chip_data(virq, &media5200_irq);
}
static int media5200_irq_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
* output signals or measure input signals.
*
* This driver supports the GPIO and IRQ controller functions of the GPT
- * device. Timer functions are not yet supported, nor is the watchdog
- * timer.
+ * device. Timer functions are not yet supported.
+ *
+ * The timer gpt0 can be used as watchdog (wdt). If the wdt mode is used,
+ * this prevents the use of any gpt0 gpt function (i.e. they will fail with
+ * -EBUSY). Thus, the safety wdt function always has precedence over the gpt
+ * function. If the kernel has been compiled with CONFIG_WATCHDOG_NOWAYOUT,
+ * this means that gpt0 is locked in wdt mode until the next reboot - this
+ * may be a requirement in safety applications.
*
* To use the GPIO function, the following two properties must be added
* to the device tree node for the gpt device (typically in the .dts file
* the output mode. This driver does not change the output mode setting.
*/
+#include <linux/device.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <asm/div64.h>
#include <asm/mpc52xx.h>
MODULE_DESCRIPTION("Freescale MPC52xx gpt driver");
-MODULE_AUTHOR("Sascha Hauer, Grant Likely");
+MODULE_AUTHOR("Sascha Hauer, Grant Likely, Albrecht Dreß");
MODULE_LICENSE("GPL");
/**
* @lock: spinlock to coordinate between different functions.
* @of_gc: of_gpio_chip instance structure; used when GPIO is enabled
* @irqhost: Pointer to irq_host instance; used when IRQ mode is supported
+ * @wdt_mode: only relevant for gpt0: bit 0 (MPC52xx_GPT_CAN_WDT) indicates
+ * if the gpt may be used as wdt, bit 1 (MPC52xx_GPT_IS_WDT) indicates
+ * if the timer is actively used as wdt which blocks gpt functions
*/
struct mpc52xx_gpt_priv {
+ struct list_head list; /* List of all GPT devices */
struct device *dev;
struct mpc52xx_gpt __iomem *regs;
spinlock_t lock;
struct irq_host *irqhost;
+ u32 ipb_freq;
+ u8 wdt_mode;
#if defined(CONFIG_GPIOLIB)
struct of_gpio_chip of_gc;
#endif
};
+LIST_HEAD(mpc52xx_gpt_list);
+DEFINE_MUTEX(mpc52xx_gpt_list_mutex);
+
#define MPC52xx_GPT_MODE_MS_MASK (0x07)
#define MPC52xx_GPT_MODE_MS_IC (0x01)
#define MPC52xx_GPT_MODE_MS_OC (0x02)
#define MPC52xx_GPT_MODE_GPIO_OUT_LOW (0x20)
#define MPC52xx_GPT_MODE_GPIO_OUT_HIGH (0x30)
+#define MPC52xx_GPT_MODE_COUNTER_ENABLE (0x1000)
+#define MPC52xx_GPT_MODE_CONTINUOUS (0x0400)
+#define MPC52xx_GPT_MODE_OPEN_DRAIN (0x0200)
#define MPC52xx_GPT_MODE_IRQ_EN (0x0100)
+#define MPC52xx_GPT_MODE_WDT_EN (0x8000)
#define MPC52xx_GPT_MODE_ICT_MASK (0x030000)
#define MPC52xx_GPT_MODE_ICT_RISING (0x010000)
#define MPC52xx_GPT_MODE_ICT_FALLING (0x020000)
#define MPC52xx_GPT_MODE_ICT_TOGGLE (0x030000)
+#define MPC52xx_GPT_MODE_WDT_PING (0xa5)
+
#define MPC52xx_GPT_STATUS_IRQMASK (0x000f)
+#define MPC52xx_GPT_CAN_WDT (1 << 0)
+#define MPC52xx_GPT_IS_WDT (1 << 1)
+
+
/* ---------------------------------------------------------------------
* Cascaded interrupt controller hooks
*/
}
static struct irq_chip mpc52xx_gpt_irq_chip = {
- .typename = "MPC52xx GPT",
+ .name = "MPC52xx GPT",
.unmask = mpc52xx_gpt_irq_unmask,
.mask = mpc52xx_gpt_irq_mask,
.ack = mpc52xx_gpt_irq_ack,
}
static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]);
- if ((intsize < 1) || (intspec[0] < 1) || (intspec[0] > 3)) {
+ if ((intsize < 1) || (intspec[0] > 3)) {
dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name);
return -EINVAL;
}
{
int cascade_virq;
unsigned long flags;
-
- /* Only setup cascaded IRQ if device tree claims the GPT is
- * an interrupt controller */
- if (!of_find_property(node, "interrupt-controller", NULL))
- return;
+ u32 mode;
cascade_virq = irq_of_parse_and_map(node, 0);
+ if (!cascade_virq)
+ return;
gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1,
&mpc52xx_gpt_irq_ops, -1);
}
gpt->irqhost->host_data = gpt;
-
set_irq_data(cascade_virq, gpt);
set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade);
- /* Set to Input Capture mode */
+ /* If the GPT is currently disabled, then change it to be in Input
+ * Capture mode. If the mode is non-zero, then the pin could be
+ * already in use for something. */
spin_lock_irqsave(&gpt->lock, flags);
- clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
- MPC52xx_GPT_MODE_MS_IC);
+ mode = in_be32(&gpt->regs->mode);
+ if ((mode & MPC52xx_GPT_MODE_MS_MASK) == 0)
+ out_be32(&gpt->regs->mode, mode | MPC52xx_GPT_MODE_MS_IC);
spin_unlock_irqrestore(&gpt->lock, flags);
dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq);
mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { }
#endif /* defined(CONFIG_GPIOLIB) */
+/***********************************************************************
+ * Timer API
+ */
+
+/**
+ * mpc52xx_gpt_from_irq - Return the GPT device associated with an IRQ number
+ * @irq: irq of timer.
+ */
+struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq)
+{
+ struct mpc52xx_gpt_priv *gpt;
+ struct list_head *pos;
+
+ /* Iterate over the list of timers looking for a matching device */
+ mutex_lock(&mpc52xx_gpt_list_mutex);
+ list_for_each(pos, &mpc52xx_gpt_list) {
+ gpt = container_of(pos, struct mpc52xx_gpt_priv, list);
+ if (gpt->irqhost && irq == irq_linear_revmap(gpt->irqhost, 0)) {
+ mutex_unlock(&mpc52xx_gpt_list_mutex);
+ return gpt;
+ }
+ }
+ mutex_unlock(&mpc52xx_gpt_list_mutex);
+
+ return NULL;
+}
+EXPORT_SYMBOL(mpc52xx_gpt_from_irq);
+
+static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period,
+ int continuous, int as_wdt)
+{
+ u32 clear, set;
+ u64 clocks;
+ u32 prescale;
+ unsigned long flags;
+
+ clear = MPC52xx_GPT_MODE_MS_MASK | MPC52xx_GPT_MODE_CONTINUOUS;
+ set = MPC52xx_GPT_MODE_MS_GPIO | MPC52xx_GPT_MODE_COUNTER_ENABLE;
+ if (as_wdt) {
+ clear |= MPC52xx_GPT_MODE_IRQ_EN;
+ set |= MPC52xx_GPT_MODE_WDT_EN;
+ } else if (continuous)
+ set |= MPC52xx_GPT_MODE_CONTINUOUS;
+
+ /* Determine the number of clocks in the requested period. 64 bit
+ * arithmatic is done here to preserve the precision until the value
+ * is scaled back down into the u32 range. Period is in 'ns', bus
+ * frequency is in Hz. */
+ clocks = period * (u64)gpt->ipb_freq;
+ do_div(clocks, 1000000000); /* Scale it down to ns range */
+
+ /* This device cannot handle a clock count greater than 32 bits */
+ if (clocks > 0xffffffff)
+ return -EINVAL;
+
+ /* Calculate the prescaler and count values from the clocks value.
+ * 'clocks' is the number of clock ticks in the period. The timer
+ * has 16 bit precision and a 16 bit prescaler. Prescaler is
+ * calculated by integer dividing the clocks by 0x10000 (shifting
+ * down 16 bits) to obtain the smallest possible divisor for clocks
+ * to get a 16 bit count value.
+ *
+ * Note: the prescale register is '1' based, not '0' based. ie. a
+ * value of '1' means divide the clock by one. 0xffff divides the
+ * clock by 0xffff. '0x0000' does not divide by zero, but wraps
+ * around and divides by 0x10000. That is why prescale must be
+ * a u32 variable, not a u16, for this calculation. */
+ prescale = (clocks >> 16) + 1;
+ do_div(clocks, prescale);
+ if (clocks > 0xffff) {
+ pr_err("calculation error; prescale:%x clocks:%llx\n",
+ prescale, clocks);
+ return -EINVAL;
+ }
+
+ /* Set and enable the timer, reject an attempt to use a wdt as gpt */
+ spin_lock_irqsave(&gpt->lock, flags);
+ if (as_wdt)
+ gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
+ else if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) {
+ spin_unlock_irqrestore(&gpt->lock, flags);
+ return -EBUSY;
+ }
+ out_be32(&gpt->regs->count, prescale << 16 | clocks);
+ clrsetbits_be32(&gpt->regs->mode, clear, set);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+
+ return 0;
+}
+
+/**
+ * mpc52xx_gpt_start_timer - Set and enable the GPT timer
+ * @gpt: Pointer to gpt private data structure
+ * @period: period of timer in ns; max. ~130s @ 33MHz IPB clock
+ * @continuous: set to 1 to make timer continuous free running
+ *
+ * An interrupt will be generated every time the timer fires
+ */
+int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period,
+ int continuous)
+{
+ return mpc52xx_gpt_do_start(gpt, period, continuous, 0);
+}
+EXPORT_SYMBOL(mpc52xx_gpt_start_timer);
+
+/**
+ * mpc52xx_gpt_stop_timer - Stop a gpt
+ * @gpt: Pointer to gpt private data structure
+ *
+ * Returns an error if attempting to stop a wdt
+ */
+int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt)
+{
+ unsigned long flags;
+
+ /* reject the operation if the timer is used as watchdog (gpt 0 only) */
+ spin_lock_irqsave(&gpt->lock, flags);
+ if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) {
+ spin_unlock_irqrestore(&gpt->lock, flags);
+ return -EBUSY;
+ }
+
+ clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_COUNTER_ENABLE);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(mpc52xx_gpt_stop_timer);
+
+/**
+ * mpc52xx_gpt_timer_period - Read the timer period
+ * @gpt: Pointer to gpt private data structure
+ *
+ * Returns the timer period in ns
+ */
+u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt)
+{
+ u64 period;
+ u64 prescale;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpt->lock, flags);
+ period = in_be32(&gpt->regs->count);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+
+ prescale = period >> 16;
+ period &= 0xffff;
+ if (prescale == 0)
+ prescale = 0x10000;
+ period = period * prescale * 1000000000ULL;
+ do_div(period, (u64)gpt->ipb_freq);
+ return period;
+}
+EXPORT_SYMBOL(mpc52xx_gpt_timer_period);
+
+#if defined(CONFIG_MPC5200_WDT)
+/***********************************************************************
+ * Watchdog API for gpt0
+ */
+
+#define WDT_IDENTITY "mpc52xx watchdog on GPT0"
+
+/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
+static unsigned long wdt_is_active;
+
+/* wdt-capable gpt */
+static struct mpc52xx_gpt_priv *mpc52xx_gpt_wdt;
+
+/* low-level wdt functions */
+static inline void mpc52xx_gpt_wdt_ping(struct mpc52xx_gpt_priv *gpt_wdt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpt_wdt->lock, flags);
+ out_8((u8 *) &gpt_wdt->regs->mode, MPC52xx_GPT_MODE_WDT_PING);
+ spin_unlock_irqrestore(&gpt_wdt->lock, flags);
+}
+
+/* wdt misc device api */
+static ssize_t mpc52xx_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
+ mpc52xx_gpt_wdt_ping(gpt_wdt);
+ return 0;
+}
+
+static struct watchdog_info mpc5200_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = WDT_IDENTITY,
+};
+
+static long mpc52xx_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
+ int __user *data = (int __user *)arg;
+ int timeout;
+ u64 real_timeout;
+ int ret = 0;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user(data, &mpc5200_wdt_info,
+ sizeof(mpc5200_wdt_info));
+ if (ret)
+ ret = -EFAULT;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(0, data);
+ break;
+
+ case WDIOC_KEEPALIVE:
+ mpc52xx_gpt_wdt_ping(gpt_wdt);
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(timeout, data);
+ if (ret)
+ break;
+ real_timeout = (u64) timeout * 1000000000ULL;
+ ret = mpc52xx_gpt_do_start(gpt_wdt, real_timeout, 0, 1);
+ if (ret)
+ break;
+ /* fall through and return the timeout */
+
+ case WDIOC_GETTIMEOUT:
+ /* we need to round here as to avoid e.g. the following
+ * situation:
+ * - timeout requested is 1 second;
+ * - real timeout @33MHz is 999997090ns
+ * - the int divide by 10^9 will return 0.
+ */
+ real_timeout =
+ mpc52xx_gpt_timer_period(gpt_wdt) + 500000000ULL;
+ do_div(real_timeout, 1000000000ULL);
+ timeout = (int) real_timeout;
+ ret = put_user(timeout, data);
+ break;
+
+ default:
+ ret = -ENOTTY;
+ }
+ return ret;
+}
+
+static int mpc52xx_wdt_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ /* sanity check */
+ if (!mpc52xx_gpt_wdt)
+ return -ENODEV;
+
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &wdt_is_active))
+ return -EBUSY;
+
+ /* Set and activate the watchdog with 30 seconds timeout */
+ ret = mpc52xx_gpt_do_start(mpc52xx_gpt_wdt, 30ULL * 1000000000ULL,
+ 0, 1);
+ if (ret) {
+ clear_bit(0, &wdt_is_active);
+ return ret;
+ }
+
+ file->private_data = mpc52xx_gpt_wdt;
+ return nonseekable_open(inode, file);
+}
+
+static int mpc52xx_wdt_release(struct inode *inode, struct file *file)
+{
+ /* note: releasing the wdt in NOWAYOUT-mode does not stop it */
+#if !defined(CONFIG_WATCHDOG_NOWAYOUT)
+ struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpt_wdt->lock, flags);
+ clrbits32(&gpt_wdt->regs->mode,
+ MPC52xx_GPT_MODE_COUNTER_ENABLE | MPC52xx_GPT_MODE_WDT_EN);
+ gpt_wdt->wdt_mode &= ~MPC52xx_GPT_IS_WDT;
+ spin_unlock_irqrestore(&gpt_wdt->lock, flags);
+#endif
+ clear_bit(0, &wdt_is_active);
+ return 0;
+}
+
+
+static const struct file_operations mpc52xx_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = mpc52xx_wdt_write,
+ .unlocked_ioctl = mpc52xx_wdt_ioctl,
+ .open = mpc52xx_wdt_open,
+ .release = mpc52xx_wdt_release,
+};
+
+static struct miscdevice mpc52xx_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &mpc52xx_wdt_fops,
+};
+
+static int __devinit mpc52xx_gpt_wdt_init(void)
+{
+ int err;
+
+ /* try to register the watchdog misc device */
+ err = misc_register(&mpc52xx_wdt_miscdev);
+ if (err)
+ pr_err("%s: cannot register watchdog device\n", WDT_IDENTITY);
+ else
+ pr_info("%s: watchdog device registered\n", WDT_IDENTITY);
+ return err;
+}
+
+static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
+ const u32 *period)
+{
+ u64 real_timeout;
+
+ /* remember the gpt for the wdt operation */
+ mpc52xx_gpt_wdt = gpt;
+
+ /* configure the wdt if the device tree contained a timeout */
+ if (!period || *period == 0)
+ return 0;
+
+ real_timeout = (u64) *period * 1000000000ULL;
+ if (mpc52xx_gpt_do_start(gpt, real_timeout, 0, 1))
+ dev_warn(gpt->dev, "starting as wdt failed\n");
+ else
+ dev_info(gpt->dev, "watchdog set to %us timeout\n", *period);
+ return 0;
+}
+
+#else
+
+static int __devinit mpc52xx_gpt_wdt_init(void)
+{
+ return 0;
+}
+
+#define mpc52xx_gpt_wdt_setup(x, y) (0)
+
+#endif /* CONFIG_MPC5200_WDT */
+
/* ---------------------------------------------------------------------
* of_platform bus binding code
*/
spin_lock_init(&gpt->lock);
gpt->dev = &ofdev->dev;
+ gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->node);
gpt->regs = of_iomap(ofdev->node, 0);
if (!gpt->regs) {
kfree(gpt);
mpc52xx_gpt_gpio_setup(gpt, ofdev->node);
mpc52xx_gpt_irq_setup(gpt, ofdev->node);
+ mutex_lock(&mpc52xx_gpt_list_mutex);
+ list_add(&gpt->list, &mpc52xx_gpt_list);
+ mutex_unlock(&mpc52xx_gpt_list_mutex);
+
+ /* check if this device could be a watchdog */
+ if (of_get_property(ofdev->node, "fsl,has-wdt", NULL) ||
+ of_get_property(ofdev->node, "has-wdt", NULL)) {
+ const u32 *on_boot_wdt;
+
+ gpt->wdt_mode = MPC52xx_GPT_CAN_WDT;
+ on_boot_wdt = of_get_property(ofdev->node, "fsl,wdt-on-boot",
+ NULL);
+ if (on_boot_wdt) {
+ dev_info(gpt->dev, "used as watchdog\n");
+ gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
+ } else
+ dev_info(gpt->dev, "can function as watchdog\n");
+ mpc52xx_gpt_wdt_setup(gpt, on_boot_wdt);
+ }
+
return 0;
}
/* Make sure GPIOs and IRQs get set up before anyone tries to use them */
subsys_initcall(mpc52xx_gpt_init);
+device_initcall(mpc52xx_gpt_wdt_init);
--- /dev/null
+/*
+ * LocalPlus Bus FIFO driver for the Freescale MPC52xx.
+ *
+ * Copyright (C) 2009 Secret Lab Technologies Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * Todo:
+ * - Add support for multiple requests to be queued.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/mpc52xx.h>
+#include <asm/time.h>
+
+#include <sysdev/bestcomm/bestcomm.h>
+#include <sysdev/bestcomm/bestcomm_priv.h>
+#include <sysdev/bestcomm/gen_bd.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver");
+MODULE_LICENSE("GPL");
+
+#define LPBFIFO_REG_PACKET_SIZE (0x00)
+#define LPBFIFO_REG_START_ADDRESS (0x04)
+#define LPBFIFO_REG_CONTROL (0x08)
+#define LPBFIFO_REG_ENABLE (0x0C)
+#define LPBFIFO_REG_BYTES_DONE_STATUS (0x14)
+#define LPBFIFO_REG_FIFO_DATA (0x40)
+#define LPBFIFO_REG_FIFO_STATUS (0x44)
+#define LPBFIFO_REG_FIFO_CONTROL (0x48)
+#define LPBFIFO_REG_FIFO_ALARM (0x4C)
+
+struct mpc52xx_lpbfifo {
+ struct device *dev;
+ phys_addr_t regs_phys;
+ void __iomem *regs;
+ int irq;
+ spinlock_t lock;
+
+ struct bcom_task *bcom_tx_task;
+ struct bcom_task *bcom_rx_task;
+ struct bcom_task *bcom_cur_task;
+
+ /* Current state data */
+ struct mpc52xx_lpbfifo_request *req;
+ int dma_irqs_enabled;
+};
+
+/* The MPC5200 has only one fifo, so only need one instance structure */
+static struct mpc52xx_lpbfifo lpbfifo;
+
+/**
+ * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transfered
+ */
+static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
+{
+ size_t transfer_size = req->size - req->pos;
+ struct bcom_bd *bd;
+ void __iomem *reg;
+ u32 *data;
+ int i;
+ int bit_fields;
+ int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
+ int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
+ int poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA;
+
+ /* Set and clear the reset bits; is good practice in User Manual */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+ /* set master enable bit */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000001);
+ if (!dma) {
+ /* While the FIFO can be setup for transfer sizes as large as
+ * 16M-1, the FIFO itself is only 512 bytes deep and it does
+ * not generate interrupts for FIFO full events (only transfer
+ * complete will raise an IRQ). Therefore when not using
+ * Bestcomm to drive the FIFO it needs to either be polled, or
+ * transfers need to constrained to the size of the fifo.
+ *
+ * This driver restricts the size of the transfer
+ */
+ if (transfer_size > 512)
+ transfer_size = 512;
+
+ /* Load the FIFO with data */
+ if (write) {
+ reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA;
+ data = req->data + req->pos;
+ for (i = 0; i < transfer_size; i += 4)
+ out_be32(reg, *data++);
+ }
+
+ /* Unmask both error and completion irqs */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000301);
+ } else {
+ /* Choose the correct direction
+ *
+ * Configure the watermarks so DMA will always complete correctly.
+ * It may be worth experimenting with the ALARM value to see if
+ * there is a performance impacit. However, if it is wrong there
+ * is a risk of DMA not transferring the last chunk of data
+ */
+ if (write) {
+ out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1e4);
+ out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 7);
+ lpbfifo.bcom_cur_task = lpbfifo.bcom_tx_task;
+ } else {
+ out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1ff);
+ out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 0);
+ lpbfifo.bcom_cur_task = lpbfifo.bcom_rx_task;
+
+ if (poll_dma) {
+ if (lpbfifo.dma_irqs_enabled) {
+ disable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task));
+ lpbfifo.dma_irqs_enabled = 0;
+ }
+ } else {
+ if (!lpbfifo.dma_irqs_enabled) {
+ enable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task));
+ lpbfifo.dma_irqs_enabled = 1;
+ }
+ }
+ }
+
+ bd = bcom_prepare_next_buffer(lpbfifo.bcom_cur_task);
+ bd->status = transfer_size;
+ if (!write) {
+ /*
+ * In the DMA read case, the DMA doesn't complete,
+ * possibly due to incorrect watermarks in the ALARM
+ * and CONTROL regs. For now instead of trying to
+ * determine the right watermarks that will make this
+ * work, just increase the number of bytes the FIFO is
+ * expecting.
+ *
+ * When submitting another operation, the FIFO will get
+ * reset, so the condition of the FIFO waiting for a
+ * non-existent 4 bytes will get cleared.
+ */
+ transfer_size += 4; /* BLECH! */
+ }
+ bd->data[0] = req->data_phys + req->pos;
+ bcom_submit_next_buffer(lpbfifo.bcom_cur_task, NULL);
+
+ /* error irq & master enabled bit */
+ bit_fields = 0x00000201;
+
+ /* Unmask irqs */
+ if (write && (!poll_dma))
+ bit_fields |= 0x00000100; /* completion irq too */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, bit_fields);
+ }
+
+ /* Set transfer size, width, chip select and READ mode */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_START_ADDRESS,
+ req->offset + req->pos);
+ out_be32(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, transfer_size);
+
+ bit_fields = req->cs << 24 | 0x000008;
+ if (!write)
+ bit_fields |= 0x010000; /* read mode */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_CONTROL, bit_fields);
+
+ /* Kick it off */
+ out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01);
+ if (dma)
+ bcom_enable(lpbfifo.bcom_cur_task);
+}
+
+/**
+ * mpc52xx_lpbfifo_irq - IRQ handler for LPB FIFO
+ *
+ * On transmit, the dma completion irq triggers before the fifo completion
+ * triggers. Handle the dma completion here instead of the LPB FIFO Bestcomm
+ * task completion irq becuase everyting is not really done until the LPB FIFO
+ * completion irq triggers.
+ *
+ * In other words:
+ * For DMA, on receive, the "Fat Lady" is the bestcom completion irq. on
+ * transmit, the fifo completion irq is the "Fat Lady". The opera (or in this
+ * case the DMA/FIFO operation) is not finished until the "Fat Lady" sings.
+ *
+ * Reasons for entering this routine:
+ * 1) PIO mode rx and tx completion irq
+ * 2) DMA interrupt mode tx completion irq
+ * 3) DMA polled mode tx
+ *
+ * Exit conditions:
+ * 1) Transfer aborted
+ * 2) FIFO complete without DMA; more data to do
+ * 3) FIFO complete without DMA; all data transfered
+ * 4) FIFO complete using DMA
+ *
+ * Condition 1 can occur regardless of whether or not DMA is used.
+ * It requires executing the callback to report the error and exiting
+ * immediately.
+ *
+ * Condition 2 requires programming the FIFO with the next block of data
+ *
+ * Condition 3 requires executing the callback to report completion
+ *
+ * Condition 4 means the same as 3, except that we also retrieve the bcom
+ * buffer so DMA doesn't get clogged up.
+ *
+ * To make things trickier, the spinlock must be dropped before
+ * executing the callback, otherwise we could end up with a deadlock
+ * or nested spinlock condition. The out path is non-trivial, so
+ * extra fiddling is done to make sure all paths lead to the same
+ * outbound code.
+ */
+static irqreturn_t mpc52xx_lpbfifo_irq(int irq, void *dev_id)
+{
+ struct mpc52xx_lpbfifo_request *req;
+ u32 status = in_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS);
+ void __iomem *reg;
+ u32 *data;
+ int count, i;
+ int do_callback = 0;
+ u32 ts;
+ unsigned long flags;
+ int dma, write, poll_dma;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+ ts = get_tbl();
+
+ req = lpbfifo.req;
+ if (!req) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ pr_err("bogus LPBFIFO IRQ\n");
+ return IRQ_HANDLED;
+ }
+
+ dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
+ write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
+ poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA;
+
+ if (dma && !write) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ pr_err("bogus LPBFIFO IRQ (dma and not writting)\n");
+ return IRQ_HANDLED;
+ }
+
+ if ((status & 0x01) == 0) {
+ goto out;
+ }
+
+ /* check abort bit */
+ if (status & 0x10) {
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+ do_callback = 1;
+ goto out;
+ }
+
+ /* Read result from hardware */
+ count = in_be32(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS);
+ count &= 0x00ffffff;
+
+ if (!dma && !write) {
+ /* copy the data out of the FIFO */
+ reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA;
+ data = req->data + req->pos;
+ for (i = 0; i < count; i += 4)
+ *data++ = in_be32(reg);
+ }
+
+ /* Update transfer position and count */
+ req->pos += count;
+
+ /* Decide what to do next */
+ if (req->size - req->pos)
+ mpc52xx_lpbfifo_kick(req); /* more work to do */
+ else
+ do_callback = 1;
+
+ out:
+ /* Clear the IRQ */
+ out_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS, 0x01);
+
+ if (dma && (status & 0x11)) {
+ /*
+ * Count the DMA as complete only when the FIFO completion
+ * status or abort bits are set.
+ *
+ * (status & 0x01) should always be the case except sometimes
+ * when using polled DMA.
+ *
+ * (status & 0x10) {transfer aborted}: This case needs more
+ * testing.
+ */
+ bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL);
+ }
+ req->last_byte = ((u8 *)req->data)[req->size - 1];
+
+ /* When the do_callback flag is set; it means the transfer is finished
+ * so set the FIFO as idle */
+ if (do_callback)
+ lpbfifo.req = NULL;
+
+ if (irq != 0) /* don't increment on polled case */
+ req->irq_count++;
+
+ req->irq_ticks += get_tbl() - ts;
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ /* Spinlock is released; it is now safe to call the callback */
+ if (do_callback && req->callback)
+ req->callback(req);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * mpc52xx_lpbfifo_bcom_irq - IRQ handler for LPB FIFO Bestcomm task
+ *
+ * Only used when receiving data.
+ */
+static irqreturn_t mpc52xx_lpbfifo_bcom_irq(int irq, void *dev_id)
+{
+ struct mpc52xx_lpbfifo_request *req;
+ unsigned long flags;
+ u32 status;
+ u32 ts;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+ ts = get_tbl();
+
+ req = lpbfifo.req;
+ if (!req || (req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA)) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ if (irq != 0) /* don't increment on polled case */
+ req->irq_count++;
+
+ if (!bcom_buffer_done(lpbfifo.bcom_cur_task)) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ req->buffer_not_done_cnt++;
+ if ((req->buffer_not_done_cnt % 1000) == 0)
+ pr_err("transfer stalled\n");
+
+ return IRQ_HANDLED;
+ }
+
+ bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL);
+
+ req->last_byte = ((u8 *)req->data)[req->size - 1];
+
+ req->pos = status & 0x00ffffff;
+
+ /* Mark the FIFO as idle */
+ lpbfifo.req = NULL;
+
+ /* Release the lock before calling out to the callback. */
+ req->irq_ticks += get_tbl() - ts;
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ if (req->callback)
+ req->callback(req);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * mpc52xx_lpbfifo_bcom_poll - Poll for DMA completion
+ */
+void mpc52xx_lpbfifo_poll(void)
+{
+ struct mpc52xx_lpbfifo_request *req = lpbfifo.req;
+ int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
+ int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
+
+ /*
+ * For more information, see comments on the "Fat Lady"
+ */
+ if (dma && write)
+ mpc52xx_lpbfifo_irq(0, NULL);
+ else
+ mpc52xx_lpbfifo_bcom_irq(0, NULL);
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_poll);
+
+/**
+ * mpc52xx_lpbfifo_submit - Submit an LPB FIFO transfer request.
+ * @req: Pointer to request structure
+ */
+int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req)
+{
+ unsigned long flags;
+
+ if (!lpbfifo.regs)
+ return -ENODEV;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+
+ /* If the req pointer is already set, then a transfer is in progress */
+ if (lpbfifo.req) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ return -EBUSY;
+ }
+
+ /* Setup the transfer */
+ lpbfifo.req = req;
+ req->irq_count = 0;
+ req->irq_ticks = 0;
+ req->buffer_not_done_cnt = 0;
+ req->pos = 0;
+
+ mpc52xx_lpbfifo_kick(req);
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_submit);
+
+void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+ if (lpbfifo.req == req) {
+ /* Put it into reset and clear the state */
+ bcom_gen_bd_rx_reset(lpbfifo.bcom_rx_task);
+ bcom_gen_bd_tx_reset(lpbfifo.bcom_tx_task);
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+ lpbfifo.req = NULL;
+ }
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_abort);
+
+static int __devinit
+mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
+{
+ struct resource res;
+ int rc = -ENOMEM;
+
+ if (lpbfifo.dev != NULL)
+ return -ENOSPC;
+
+ lpbfifo.irq = irq_of_parse_and_map(op->node, 0);
+ if (!lpbfifo.irq)
+ return -ENODEV;
+
+ if (of_address_to_resource(op->node, 0, &res))
+ return -ENODEV;
+ lpbfifo.regs_phys = res.start;
+ lpbfifo.regs = of_iomap(op->node, 0);
+ if (!lpbfifo.regs)
+ return -ENOMEM;
+
+ spin_lock_init(&lpbfifo.lock);
+
+ /* Put FIFO into reset */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+ /* Register the interrupt handler */
+ rc = request_irq(lpbfifo.irq, mpc52xx_lpbfifo_irq, 0,
+ "mpc52xx-lpbfifo", &lpbfifo);
+ if (rc)
+ goto err_irq;
+
+ /* Request the Bestcomm receive (fifo --> memory) task and IRQ */
+ lpbfifo.bcom_rx_task =
+ bcom_gen_bd_rx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
+ BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC,
+ 16*1024*1024);
+ if (!lpbfifo.bcom_rx_task)
+ goto err_bcom_rx;
+
+ rc = request_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task),
+ mpc52xx_lpbfifo_bcom_irq, 0,
+ "mpc52xx-lpbfifo-rx", &lpbfifo);
+ if (rc)
+ goto err_bcom_rx_irq;
+
+ /* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
+ lpbfifo.bcom_tx_task =
+ bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
+ BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC);
+ if (!lpbfifo.bcom_tx_task)
+ goto err_bcom_tx;
+
+ lpbfifo.dev = &op->dev;
+ return 0;
+
+ err_bcom_tx:
+ free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo);
+ err_bcom_rx_irq:
+ bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
+ err_bcom_rx:
+ err_irq:
+ iounmap(lpbfifo.regs);
+ lpbfifo.regs = NULL;
+
+ dev_err(&op->dev, "mpc52xx_lpbfifo_probe() failed\n");
+ return -ENODEV;
+}
+
+
+static int __devexit mpc52xx_lpbfifo_remove(struct of_device *op)
+{
+ if (lpbfifo.dev != &op->dev)
+ return 0;
+
+ /* Put FIFO in reset */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+ /* Release the bestcomm transmit task */
+ free_irq(bcom_get_task_irq(lpbfifo.bcom_tx_task), &lpbfifo);
+ bcom_gen_bd_tx_release(lpbfifo.bcom_tx_task);
+
+ /* Release the bestcomm receive task */
+ free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo);
+ bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
+
+ free_irq(lpbfifo.irq, &lpbfifo);
+ iounmap(lpbfifo.regs);
+ lpbfifo.regs = NULL;
+ lpbfifo.dev = NULL;
+
+ return 0;
+}
+
+static struct of_device_id mpc52xx_lpbfifo_match[] __devinitconst = {
+ { .compatible = "fsl,mpc5200-lpbfifo", },
+ {},
+};
+
+static struct of_platform_driver mpc52xx_lpbfifo_driver = {
+ .owner = THIS_MODULE,
+ .name = "mpc52xx-lpbfifo",
+ .match_table = mpc52xx_lpbfifo_match,
+ .probe = mpc52xx_lpbfifo_probe,
+ .remove = __devexit_p(mpc52xx_lpbfifo_remove),
+};
+
+/***********************************************************************
+ * Module init/exit
+ */
+static int __init mpc52xx_lpbfifo_init(void)
+{
+ pr_debug("Registering LocalPlus bus FIFO driver\n");
+ return of_register_platform_driver(&mpc52xx_lpbfifo_driver);
+}
+module_init(mpc52xx_lpbfifo_init);
+
+static void __exit mpc52xx_lpbfifo_exit(void)
+{
+ pr_debug("Unregistering LocalPlus bus FIFO driver\n");
+ of_unregister_platform_driver(&mpc52xx_lpbfifo_driver);
+}
+module_exit(mpc52xx_lpbfifo_exit);
}
static struct irq_chip mpc52xx_extirq_irqchip = {
- .typename = "MPC52xx External",
+ .name = "MPC52xx External",
.mask = mpc52xx_extirq_mask,
.unmask = mpc52xx_extirq_unmask,
.ack = mpc52xx_extirq_ack,
}
static struct irq_chip mpc52xx_main_irqchip = {
- .typename = "MPC52xx Main",
+ .name = "MPC52xx Main",
.mask = mpc52xx_main_mask,
.mask_ack = mpc52xx_main_mask,
.unmask = mpc52xx_main_unmask,
}
static struct irq_chip mpc52xx_periph_irqchip = {
- .typename = "MPC52xx Peripherals",
+ .name = "MPC52xx Peripherals",
.mask = mpc52xx_periph_mask,
.mask_ack = mpc52xx_periph_mask,
.unmask = mpc52xx_periph_unmask,
}
static struct irq_chip mpc52xx_sdma_irqchip = {
- .typename = "MPC52xx SDMA",
+ .name = "MPC52xx SDMA",
.mask = mpc52xx_sdma_mask,
.unmask = mpc52xx_sdma_unmask,
.ack = mpc52xx_sdma_ack,
* mpc52xx_irqhost_xlate - translate virq# from device tree interrupts property
*/
static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
}
static struct irq_chip pq2ads_pci_ic = {
- .typename = "PQ2 ADS PCI",
.name = "PQ2 ADS PCI",
.end = pq2ads_pci_unmask_irq,
.mask = pq2ads_pci_mask_irq,
static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_data(virq, h->host_data);
set_irq_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq);
return 0;
prop = of_get_property(np, "mode", NULL);
if (prop && !strcmp(prop, "cpu-qe"))
- pdata.qe_mode = 1;
+ pdata.flags = SPI_QE_CPU_MODE;
for (j = 0; j < num_board_infos; j++) {
if (board_infos[j].bus_num == pdata.bus_num)
{
return deep_sleeping;
}
+EXPORT_SYMBOL(fsl_deep_sleep);
static int mpc83xx_change_state(void)
{
-menuconfig MPC85xx
- bool "Machine Type"
- depends on PPC_85xx
+menuconfig FSL_SOC_BOOKE
+ bool "Freescale Book-E Machine Type"
+ depends on PPC_85xx || PPC_BOOK3E
+ select FSL_SOC
select PPC_UDBG_16550
select MPIC
select PPC_PCI_CHOICE
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y
-if MPC85xx
+if FSL_SOC_BOOKE
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
help
This option enables support for the Wind River SBC8560 board
-endif # MPC85xx
+config P4080_DS
+ bool "Freescale P4080 DS"
+ select DEFAULT_UIMAGE
+ select PPC_FSL_BOOK3E
+ select PPC_E500MC
+ select PHYS_64BIT
+ select SWIOTLB
+ select MPC8xxx_GPIO
+ select HAS_RAPIDIO
+ help
+ This option enables support for the P4080 DS board
+
+endif # FSL_SOC_BOOKE
config TQM85xx
bool
obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
+obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
--- /dev/null
+/*
+ * Corenet based SoC DS Setup
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/lmb.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+void __init corenet_ds_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+ unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN |
+ MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU;
+
+ np = of_find_node_by_type(np, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Failed to map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ if (ppc_md.get_irq == mpic_get_coreint_irq)
+ flags |= MPIC_ENABLE_COREINT;
+
+ mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+
+ mpic_init(mpic);
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#endif
+
+void __init corenet_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+ struct pci_controller *hose;
+#endif
+ dma_addr_t max = 0xffffffff;
+
+#ifdef CONFIG_SMP
+ mpc85xx_smp_init();
+#endif
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,p4080-pcie") {
+ struct resource rsrc;
+ of_address_to_resource(np, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) == primary_phb_addr)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+
+ hose = pci_find_hose_for_OF_device(np);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
+#endif
+
+#ifdef CONFIG_SWIOTLB
+ if (lmb_end_of_DRAM() > max) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+ pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
+}
+
+static const struct of_device_id of_device_ids[] __devinitconst = {
+ {
+ .compatible = "simple-bus"
+ },
+ {
+ .compatible = "fsl,rapidio-delta",
+ },
+ {}
+};
+
+int __init corenet_ds_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, of_device_ids, NULL);
+}
--- /dev/null
+/*
+ * Corenet based SoC DS Setup
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef CORENET_DS_H
+#define CORENET_DS_H
+
+extern void __init corenet_ds_pic_init(void);
+extern void __init corenet_ds_setup_arch(void);
+extern int __init corenet_ds_publish_devices(void);
+
+#endif
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
{ .compatible = "fsl,rapidio-delta", },
+ { .compatible = "fsl,mpc8548-guts", },
{},
};
struct mpic *mpic;
struct resource r;
struct device_node *np;
+ unsigned long root = of_get_flat_dt_root();
np = of_find_node_by_type(NULL, "open-pic");
if (np == NULL) {
return;
}
- mpic = mpic_alloc(np, r.start,
+ if (of_flat_dt_is_compatible(root, "fsl,85XXRDB-CAMP")) {
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY |
+ MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+ 0, 256, " OpenPIC ");
+ } else {
+ mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
+ }
BUG_ON(mpic == NULL);
of_node_put(np);
return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
}
machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
+machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
/*
* Called very early, device-tree isn't unflattened
return 0;
}
+static int __init p1020_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,P1020RDB"))
+ return 1;
+ return 0;
+}
+
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1020_rdb) {
+ .name = "P1020 RDB",
+ .probe = p1020_rdb_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--- /dev/null
+/*
+ * P4080 DS Setup
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "corenet_ds.h"
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p4080_ds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,P4080DS")) {
+#ifdef CONFIG_PCI
+ /* treat PCIe1 as primary,
+ * shouldn't matter as we have no ISA on the board
+ */
+ primary_phb_addr = 0x0000;
+#endif
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+define_machine(p4080_ds) {
+ .name = "P4080 DS",
+ .probe = p4080_ds_probe,
+ .setup_arch = corenet_ds_setup_arch,
+ .init_IRQ = corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_coreint_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+machine_device_initcall(p4080_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
}
static struct irq_chip socrates_fpga_pic_chip = {
- .typename = " FPGA-PIC ",
+ .name = " FPGA-PIC ",
.ack = socrates_fpga_pic_ack,
.mask = socrates_fpga_pic_mask,
.mask_ack = socrates_fpga_pic_mask_ack,
irq_hw_number_t hwirq)
{
/* All interrupts are LEVEL sensitive */
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &socrates_fpga_pic_chip,
handle_fasteoi_irq);
}
static int socrates_fpga_pic_host_xlate(struct irq_host *h,
- struct device_node *ct, u32 *intspec, unsigned int intsize,
+ struct device_node *ct, const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
config GEF_PPC9A
bool "GE Fanuc PPC9A"
select DEFAULT_UIMAGE
+ select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
config GEF_SBC310
bool "GE Fanuc SBC310"
select DEFAULT_UIMAGE
+ select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
config GEF_SBC610
bool "GE Fanuc SBC610"
select DEFAULT_UIMAGE
+ select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAS_RAPIDIO
}
static struct irq_chip gef_pic_chip = {
- .typename = "gefp",
+ .name = "gefp",
.mask = gef_pic_mask,
.mask_ack = gef_pic_mask_ack,
.unmask = gef_pic_unmask,
irq_hw_number_t hwirq)
{
/* All interrupts are LEVEL sensitive */
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
return 0;
}
static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/nvram.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
printk(KERN_WARNING "Unable to map board registers\n");
of_node_put(regs);
}
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
}
/* Return the PCB revision */
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/nvram.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
printk(KERN_WARNING "Unable to map board registers\n");
of_node_put(regs);
}
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
}
/* Return the PCB revision */
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/nvram.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
printk(KERN_WARNING "Unable to map board registers\n");
of_node_put(regs);
}
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
}
/* Return the PCB revision */
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include "mpc86xx.h"
+static struct device_node *pixis_node;
static unsigned char *pixis_bdcfg0, *pixis_arch;
+#ifdef CONFIG_SUSPEND
+static irqreturn_t mpc8610_sw9_irq(int irq, void *data)
+{
+ pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__);
+ return IRQ_HANDLED;
+}
+
+static void __init mpc8610_suspend_init(void)
+{
+ int irq;
+ int ret;
+
+ if (!pixis_node)
+ return;
+
+ irq = irq_of_parse_and_map(pixis_node, 0);
+ if (!irq) {
+ pr_err("%s: can't map pixis event IRQ.\n", __func__);
+ return;
+ }
+
+ ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL);
+ if (ret) {
+ pr_err("%s: can't request pixis event IRQ: %d\n",
+ __func__, ret);
+ irq_dispose_mapping(irq);
+ }
+
+ enable_irq_wake(irq);
+}
+#else
+static inline void mpc8610_suspend_init(void) { }
+#endif /* CONFIG_SUSPEND */
+
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
+ { .compatible = "fsl,mpc8610-guts", },
{ .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}
/* Firstly, register PIXIS GPIOs. */
simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
+ /* Enable wakeup on PIXIS' event IRQ. */
+ mpc8610_suspend_init();
+
/* Without this call, the SSI device driver won't get probed. */
of_platform_bus_probe(NULL, mpc8610_ids, NULL);
diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
#endif
- np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
- if (np) {
- of_address_to_resource(np, 0, &r);
- of_node_put(np);
+ pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
+ if (pixis_node) {
+ of_address_to_resource(pixis_node, 0, &r);
+ of_node_put(pixis_node);
pixis = ioremap(r.start, 32);
if (!pixis) {
printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
int cascade_irq;
if ((cascade_irq = cpm_get_irq()) >= 0) {
- struct irq_desc *cdesc = irq_desc + cascade_irq;
+ struct irq_desc *cdesc = irq_to_desc(cascade_irq);
generic_handle_irq(cascade_irq);
cdesc->chip->eoi(cascade_irq);
depends on PPC_RTAS
default n
+config PPC_RTAS_DAEMON
+ bool
+ depends on PPC_RTAS
+ default n
+
config RTAS_PROC
bool "Proc interface to RTAS"
depends on PPC_RTAS
config CPM2
bool "Enable support for the CPM2 (Communications Processor Module)"
- depends on MPC85xx || 8260
+ depends on (FSL_SOC_BOOKE && PPC32) || 8260
select CPM
select PPC_LIB_RHEAP
select PPC_PCI_CHOICE
config MPC8xxx_GPIO
bool "MPC8xxx GPIO support"
- depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
+ depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
config PPC_85xx
bool "Freescale 85xx"
select E500
- select FSL_SOC
- select MPC85xx
config PPC_8xx
bool "Freescale 8xx"
bool
default y if PPC64
+config FSL_EMB_PERFMON
+ bool "Freescale Embedded Perfmon"
+ depends on E500 || PPC_83xx
+ help
+ This is the Performance Monitor support found on the e500 core
+ and some e300 cores (c3 and c4). Select this only if your
+ core supports the Embedded Performance Monitor APU
+
config 4xx
bool
depends on 40x || 44x
depends on E200 || E500
default y
-config FSL_EMB_PERFMON
- bool "Freescale Embedded Perfmon"
- depends on E500 || PPC_83xx
- help
- This is the Performance Monitor support found on the e500 core
- and some e300 cores (c3 and c4). Select this only if your
- core supports the Embedded Performance Monitor APU
config PTE_64BIT
bool
obj-$(CONFIG_PPC_8xx) += 8xx/
obj-$(CONFIG_PPC_82xx) += 82xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
-obj-$(CONFIG_PPC_85xx) += 85xx/
+obj-$(CONFIG_FSL_SOC_BOOKE) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/
obj-$(CONFIG_PPC_PSERIES) += pseries/
obj-$(CONFIG_PPC_ISERIES) += iseries/
.mask = mask_msi_irq,
.unmask = unmask_msi_irq,
.shutdown = unmask_msi_irq,
- .typename = "AXON-MSI",
+ .name = "AXON-MSI",
};
static int msic_host_map(struct irq_host *h, unsigned int virq,
}
static struct irq_chip beatic_pic = {
- .typename = " CELL-BEAT ",
+ .name = " CELL-BEAT ",
.unmask = beatic_unmask_irq,
.mask = beatic_mask_irq,
.eoi = beatic_end_irq,
static int beatic_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
int64_t err;
err = beat_construct_and_connect_irq_plug(virq, hw);
* Note: We have only 1 entry to translate.
*/
static int beatic_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
- u64 *intspec2 = (u64 *)intspec;
+ const u64 *intspec2 = (const u64 *)intspec;
*out_hwirq = *intspec2;
*out_flags |= IRQ_TYPE_LEVEL_LOW;
}
static struct irq_chip iic_chip = {
- .typename = " CELL-IIC ",
+ .name = " CELL-IIC ",
.mask = iic_mask,
.unmask = iic_unmask,
.eoi = iic_eoi,
static struct irq_chip iic_ioexc_chip = {
- .typename = " CELL-IOEX",
+ .name = " CELL-IOEX",
.mask = iic_mask,
.unmask = iic_unmask,
.eoi = iic_ioexc_eoi,
}
static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
/* Reset edge detection logic if necessary
*/
- if (get_irq_desc(virq)->status & IRQ_LEVEL)
+ if (irq_to_desc(virq)->status & IRQ_LEVEL)
return;
/* Only interrupts 47 to 50 can be set to edge */
struct spider_pic *pic = spider_virq_to_pic(virq);
unsigned int hw = irq_map[virq].hwirq;
void __iomem *cfg = spider_get_irq_config(pic, hw);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
u32 old_mask;
u32 ic;
}
static struct irq_chip spider_pic = {
- .typename = " SPIDER ",
+ .name = " SPIDER ",
.unmask = spider_unmask_irq,
.mask = spider_mask_irq,
.ack = spider_ack_irq,
}
static int spider_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
int error = 0, cnt = 0;
- if (!buf || len < 0)
+ if (!buf)
return -EINVAL;
error = spu_acquire(ctx);
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_RTAS
+ select PPC_RTAS_DAEMON
+ select RTAS_ERROR_LOGGING
select PPC_MPC106
select PPC_UDBG_16550
select PPC_NATIVE
if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
}
-void
-chrp_event_scan(unsigned long unused)
-{
- unsigned char log[1024];
- int ret = 0;
-
- /* XXX: we should loop until the hardware says no more error logs -- Cort */
- rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
- __pa(log), 1024);
- mod_timer(&__get_cpu_var(heartbeat_timer),
- jiffies + event_scan_interval);
-}
-
static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc)
{
unsigned int cascade_irq = i8259_irq();
void __init
chrp_init2(void)
{
- struct device_node *device;
- const unsigned int *p = NULL;
-
#ifdef CONFIG_NVRAM
chrp_nvram_init();
#endif
request_region(0x80,0x10,"dma page reg");
request_region(0xc0,0x20,"dma2");
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- device = of_find_node_by_name(NULL, "rtas");
- if (device)
- p = of_get_property(device, "rtas-event-scan-rate", NULL);
- if (p && *p) {
- /*
- * Arrange to call chrp_event_scan at least *p times
- * per minute. We use 59 rather than 60 here so that
- * the rate will be slightly higher than the minimum.
- * This all assumes we don't do hotplug CPU on any
- * machine that needs the event scans done.
- */
- unsigned long interval, offset;
- int cpu, ncpus;
- struct timer_list *timer;
-
- interval = HZ * 59 / *p;
- offset = HZ;
- ncpus = num_online_cpus();
- event_scan_interval = ncpus * interval;
- for (cpu = 0; cpu < ncpus; ++cpu) {
- timer = &per_cpu(heartbeat_timer, cpu);
- setup_timer(timer, chrp_event_scan, 0);
- timer->expires = jiffies + offset;
- add_timer_on(timer, cpu);
- offset += interval;
- }
- printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
- *p, interval);
- }
- of_node_put(device);
-
if (ppc_md.progress)
ppc_md.progress(" Have fun! ", 0x7777);
}
#include "call_hpt.h"
-static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp =
- { [0 ... 63] = SPIN_LOCK_UNLOCKED};
+static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp;
/*
* Very primitive algorithm for picking up a lock
void __init hpte_init_iSeries(void)
{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(iSeries_hlocks); i++)
+ spin_lock_init(&iSeries_hlocks[i]);
+
ppc_md.hpte_invalidate = iSeries_hpte_invalidate;
ppc_md.hpte_updatepp = iSeries_hpte_updatepp;
ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp;
unsigned long flags;
for_each_irq (irq) {
- struct irq_desc *desc = get_irq_desc(irq);
+ struct irq_desc *desc = irq_to_desc(irq);
if (desc && desc->chip && desc->chip->startup) {
spin_lock_irqsave(&desc->lock, flags);
}
static struct irq_chip iseries_pic = {
- .typename = "iSeries irq controller",
+ .name = "iSeries irq controller",
.startup = iseries_startup_IRQ,
.shutdown = iseries_shutdown_IRQ,
.unmask = iseries_enable_IRQ,
unsigned long bit = 1UL << (src & 0x1f);
int i = src >> 5;
- spin_lock_irqsave(&pmac_pic_lock, flags);
- if ((irq_desc[virq].status & IRQ_LEVEL) == 0)
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ if ((irq_to_desc(virq)->status & IRQ_LEVEL) == 0)
out_le32(&pmac_irq_hw[i]->ack, bit);
__set_bit(src, ppc_cached_irq_mask);
__pmac_set_irq_mask(src, 0);
- spin_unlock_irqrestore(&pmac_pic_lock, flags);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
return 0;
}
}
static struct irq_chip pmac_pic = {
- .typename = " PMAC-PIC ",
+ .name = " PMAC-PIC ",
.startup = pmac_startup_irq,
.mask = pmac_mask_irq,
.ack = pmac_ack_irq,
static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
int level;
if (hw >= max_irqs)
}
static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
*/
static struct irq_chip ps3_irq_chip = {
- .typename = "ps3",
+ .name = "ps3",
.mask = ps3_chip_mask,
.unmask = ps3_chip_unmask,
.eoi = ps3_chip_eoi,
#if defined(DEBUG)
#define DBG udbg_printf
#else
-#define DBG pr_debug
+#define DBG pr_devel
#endif
enum {
select MPIC
select PPC_I8259
select PPC_RTAS
+ select PPC_RTAS_DAEMON
select RTAS_ERROR_LOGGING
select PPC_UDBG_16550
select PPC_NATIVE
config CMM
tristate "Collaborative memory management"
- depends on PPC_SMLPAR && !CRASH_DUMP
+ depends on PPC_SMLPAR
default y
help
Select this option, if you want to enable the kernel interface
endif
obj-y := lpar.o hvCall.o nvram.o reconfig.o \
- setup.o iommu.o ras.o rtasd.o \
- firmware.o power.o
+ setup.o iommu.o ras.o \
+ firmware.o power.o dlpar.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_SCANLOG) += scanlog.o
{
int rc;
struct hvcall_mpp_data mpp_data;
- unsigned long active_pages_target;
- signed long page_loan_request;
+ signed long active_pages_target, page_loan_request, target;
+ signed long total_pages = totalram_pages + loaned_pages;
+ signed long min_mem_pages = (min_mem_mb * 1024 * 1024) / PAGE_SIZE;
rc = h_get_mpp(&mpp_data);
return;
page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
- loaned_pages_target = page_loan_request + loaned_pages;
- if (loaned_pages_target > oom_freed_pages)
- loaned_pages_target -= oom_freed_pages;
+ target = page_loan_request + (signed long)loaned_pages;
+
+ if (target < 0 || total_pages < min_mem_pages)
+ target = 0;
+
+ if (target > oom_freed_pages)
+ target -= oom_freed_pages;
else
- loaned_pages_target = 0;
+ target = 0;
+
+ active_pages_target = total_pages - target;
+
+ if (min_mem_pages > active_pages_target)
+ target = total_pages - min_mem_pages;
- active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+ if (target < 0)
+ target = 0;
- if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
- loaned_pages_target = totalram_pages + loaned_pages -
- ((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+ loaned_pages_target = target;
cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
page_loan_request, loaned_pages, loaned_pages_target,
--- /dev/null
+/*
+ * Support for dynamic reconfiguration for PCI, Memory, and CPU
+ * Hotplug and Dynamic Logical Partitioning on RPA platforms.
+ *
+ * Copyright (C) 2009 Nathan Fontenot
+ * Copyright (C) 2009 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+#include "offline_states.h"
+
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/rtas.h>
+#include <asm/pSeries_reconfig.h>
+
+struct cc_workarea {
+ u32 drc_index;
+ u32 zero;
+ u32 name_offset;
+ u32 prop_length;
+ u32 prop_offset;
+};
+
+static void dlpar_free_cc_property(struct property *prop)
+{
+ kfree(prop->name);
+ kfree(prop->value);
+ kfree(prop);
+}
+
+static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
+{
+ struct property *prop;
+ char *name;
+ char *value;
+
+ prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ return NULL;
+
+ name = (char *)ccwa + ccwa->name_offset;
+ prop->name = kstrdup(name, GFP_KERNEL);
+
+ prop->length = ccwa->prop_length;
+ value = (char *)ccwa + ccwa->prop_offset;
+ prop->value = kzalloc(prop->length, GFP_KERNEL);
+ if (!prop->value) {
+ dlpar_free_cc_property(prop);
+ return NULL;
+ }
+
+ memcpy(prop->value, value, prop->length);
+ return prop;
+}
+
+static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
+{
+ struct device_node *dn;
+ char *name;
+
+ dn = kzalloc(sizeof(*dn), GFP_KERNEL);
+ if (!dn)
+ return NULL;
+
+ /* The configure connector reported name does not contain a
+ * preceeding '/', so we allocate a buffer large enough to
+ * prepend this to the full_name.
+ */
+ name = (char *)ccwa + ccwa->name_offset;
+ dn->full_name = kmalloc(strlen(name) + 2, GFP_KERNEL);
+ if (!dn->full_name) {
+ kfree(dn);
+ return NULL;
+ }
+
+ sprintf(dn->full_name, "/%s", name);
+ return dn;
+}
+
+static void dlpar_free_one_cc_node(struct device_node *dn)
+{
+ struct property *prop;
+
+ while (dn->properties) {
+ prop = dn->properties;
+ dn->properties = prop->next;
+ dlpar_free_cc_property(prop);
+ }
+
+ kfree(dn->full_name);
+ kfree(dn);
+}
+
+static void dlpar_free_cc_nodes(struct device_node *dn)
+{
+ if (dn->child)
+ dlpar_free_cc_nodes(dn->child);
+
+ if (dn->sibling)
+ dlpar_free_cc_nodes(dn->sibling);
+
+ dlpar_free_one_cc_node(dn);
+}
+
+#define NEXT_SIBLING 1
+#define NEXT_CHILD 2
+#define NEXT_PROPERTY 3
+#define PREV_PARENT 4
+#define MORE_MEMORY 5
+#define CALL_AGAIN -2
+#define ERR_CFG_USE -9003
+
+struct device_node *dlpar_configure_connector(u32 drc_index)
+{
+ struct device_node *dn;
+ struct device_node *first_dn = NULL;
+ struct device_node *last_dn = NULL;
+ struct property *property;
+ struct property *last_property = NULL;
+ struct cc_workarea *ccwa;
+ int cc_token;
+ int rc;
+
+ cc_token = rtas_token("ibm,configure-connector");
+ if (cc_token == RTAS_UNKNOWN_SERVICE)
+ return NULL;
+
+ spin_lock(&rtas_data_buf_lock);
+ ccwa = (struct cc_workarea *)&rtas_data_buf[0];
+ ccwa->drc_index = drc_index;
+ ccwa->zero = 0;
+
+ rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL);
+ while (rc) {
+ switch (rc) {
+ case NEXT_SIBLING:
+ dn = dlpar_parse_cc_node(ccwa);
+ if (!dn)
+ goto cc_error;
+
+ dn->parent = last_dn->parent;
+ last_dn->sibling = dn;
+ last_dn = dn;
+ break;
+
+ case NEXT_CHILD:
+ dn = dlpar_parse_cc_node(ccwa);
+ if (!dn)
+ goto cc_error;
+
+ if (!first_dn)
+ first_dn = dn;
+ else {
+ dn->parent = last_dn;
+ if (last_dn)
+ last_dn->child = dn;
+ }
+
+ last_dn = dn;
+ break;
+
+ case NEXT_PROPERTY:
+ property = dlpar_parse_cc_property(ccwa);
+ if (!property)
+ goto cc_error;
+
+ if (!last_dn->properties)
+ last_dn->properties = property;
+ else
+ last_property->next = property;
+
+ last_property = property;
+ break;
+
+ case PREV_PARENT:
+ last_dn = last_dn->parent;
+ break;
+
+ case CALL_AGAIN:
+ break;
+
+ case MORE_MEMORY:
+ case ERR_CFG_USE:
+ default:
+ printk(KERN_ERR "Unexpected Error (%d) "
+ "returned from configure-connector\n", rc);
+ goto cc_error;
+ }
+
+ rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL);
+ }
+
+ spin_unlock(&rtas_data_buf_lock);
+ return first_dn;
+
+cc_error:
+ if (first_dn)
+ dlpar_free_cc_nodes(first_dn);
+ spin_unlock(&rtas_data_buf_lock);
+ return NULL;
+}
+
+static struct device_node *derive_parent(const char *path)
+{
+ struct device_node *parent;
+ char *last_slash;
+
+ last_slash = strrchr(path, '/');
+ if (last_slash == path) {
+ parent = of_find_node_by_path("/");
+ } else {
+ char *parent_path;
+ int parent_path_len = last_slash - path + 1;
+ parent_path = kmalloc(parent_path_len, GFP_KERNEL);
+ if (!parent_path)
+ return NULL;
+
+ strlcpy(parent_path, path, parent_path_len);
+ parent = of_find_node_by_path(parent_path);
+ kfree(parent_path);
+ }
+
+ return parent;
+}
+
+int dlpar_attach_node(struct device_node *dn)
+{
+ struct proc_dir_entry *ent;
+ int rc;
+
+ of_node_set_flag(dn, OF_DYNAMIC);
+ kref_init(&dn->kref);
+ dn->parent = derive_parent(dn->full_name);
+ if (!dn->parent)
+ return -ENOMEM;
+
+ rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
+ PSERIES_RECONFIG_ADD, dn);
+ if (rc == NOTIFY_BAD) {
+ printk(KERN_ERR "Failed to add device node %s\n",
+ dn->full_name);
+ return -ENOMEM; /* For now, safe to assume kmalloc failure */
+ }
+
+ of_attach_node(dn);
+
+#ifdef CONFIG_PROC_DEVICETREE
+ ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde);
+ if (ent)
+ proc_device_tree_add_node(dn, ent);
+#endif
+
+ of_node_put(dn->parent);
+ return 0;
+}
+
+int dlpar_detach_node(struct device_node *dn)
+{
+ struct device_node *parent = dn->parent;
+ struct property *prop = dn->properties;
+
+#ifdef CONFIG_PROC_DEVICETREE
+ while (prop) {
+ remove_proc_entry(prop->name, dn->pde);
+ prop = prop->next;
+ }
+
+ if (dn->pde)
+ remove_proc_entry(dn->pde->name, parent->pde);
+#endif
+
+ blocking_notifier_call_chain(&pSeries_reconfig_chain,
+ PSERIES_RECONFIG_REMOVE, dn);
+ of_detach_node(dn);
+ of_node_put(dn); /* Must decrement the refcount */
+
+ return 0;
+}
+
+#define DR_ENTITY_SENSE 9003
+#define DR_ENTITY_PRESENT 1
+#define DR_ENTITY_UNUSABLE 2
+#define ALLOCATION_STATE 9003
+#define ALLOC_UNUSABLE 0
+#define ALLOC_USABLE 1
+#define ISOLATION_STATE 9001
+#define ISOLATE 0
+#define UNISOLATE 1
+
+int dlpar_acquire_drc(u32 drc_index)
+{
+ int dr_status, rc;
+
+ rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
+ DR_ENTITY_SENSE, drc_index);
+ if (rc || dr_status != DR_ENTITY_UNUSABLE)
+ return -1;
+
+ rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_USABLE);
+ if (rc)
+ return rc;
+
+ rc = rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
+ if (rc) {
+ rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE);
+ return rc;
+ }
+
+ return 0;
+}
+
+int dlpar_release_drc(u32 drc_index)
+{
+ int dr_status, rc;
+
+ rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
+ DR_ENTITY_SENSE, drc_index);
+ if (rc || dr_status != DR_ENTITY_PRESENT)
+ return -1;
+
+ rc = rtas_set_indicator(ISOLATION_STATE, drc_index, ISOLATE);
+ if (rc)
+ return rc;
+
+ rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE);
+ if (rc) {
+ rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
+ return rc;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+
+static DEFINE_MUTEX(pseries_cpu_hotplug_mutex);
+
+void cpu_hotplug_driver_lock()
+{
+ mutex_lock(&pseries_cpu_hotplug_mutex);
+}
+
+void cpu_hotplug_driver_unlock()
+{
+ mutex_unlock(&pseries_cpu_hotplug_mutex);
+}
+
+static int dlpar_online_cpu(struct device_node *dn)
+{
+ int rc = 0;
+ unsigned int cpu;
+ int len, nthreads, i;
+ const u32 *intserv;
+
+ intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ return -EINVAL;
+
+ nthreads = len / sizeof(u32);
+
+ cpu_maps_update_begin();
+ for (i = 0; i < nthreads; i++) {
+ for_each_present_cpu(cpu) {
+ if (get_hard_smp_processor_id(cpu) != intserv[i])
+ continue;
+ BUG_ON(get_cpu_current_state(cpu)
+ != CPU_STATE_OFFLINE);
+ cpu_maps_update_done();
+ rc = cpu_up(cpu);
+ if (rc)
+ goto out;
+ cpu_maps_update_begin();
+
+ break;
+ }
+ if (cpu == num_possible_cpus())
+ printk(KERN_WARNING "Could not find cpu to online "
+ "with physical id 0x%x\n", intserv[i]);
+ }
+ cpu_maps_update_done();
+
+out:
+ return rc;
+
+}
+
+static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
+{
+ struct device_node *dn;
+ unsigned long drc_index;
+ char *cpu_name;
+ int rc;
+
+ cpu_hotplug_driver_lock();
+ rc = strict_strtoul(buf, 0, &drc_index);
+ if (rc) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ dn = dlpar_configure_connector(drc_index);
+ if (!dn) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* configure-connector reports cpus as living in the base
+ * directory of the device tree. CPUs actually live in the
+ * cpus directory so we need to fixup the full_name.
+ */
+ cpu_name = kzalloc(strlen(dn->full_name) + strlen("/cpus") + 1,
+ GFP_KERNEL);
+ if (!cpu_name) {
+ dlpar_free_cc_nodes(dn);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ sprintf(cpu_name, "/cpus%s", dn->full_name);
+ kfree(dn->full_name);
+ dn->full_name = cpu_name;
+
+ rc = dlpar_acquire_drc(drc_index);
+ if (rc) {
+ dlpar_free_cc_nodes(dn);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rc = dlpar_attach_node(dn);
+ if (rc) {
+ dlpar_release_drc(drc_index);
+ dlpar_free_cc_nodes(dn);
+ }
+
+ rc = dlpar_online_cpu(dn);
+out:
+ cpu_hotplug_driver_unlock();
+
+ return rc ? rc : count;
+}
+
+static int dlpar_offline_cpu(struct device_node *dn)
+{
+ int rc = 0;
+ unsigned int cpu;
+ int len, nthreads, i;
+ const u32 *intserv;
+
+ intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ return -EINVAL;
+
+ nthreads = len / sizeof(u32);
+
+ cpu_maps_update_begin();
+ for (i = 0; i < nthreads; i++) {
+ for_each_present_cpu(cpu) {
+ if (get_hard_smp_processor_id(cpu) != intserv[i])
+ continue;
+
+ if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE)
+ break;
+
+ if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
+ cpu_maps_update_done();
+ rc = cpu_down(cpu);
+ if (rc)
+ goto out;
+ cpu_maps_update_begin();
+ break;
+
+ }
+
+ /*
+ * The cpu is in CPU_STATE_INACTIVE.
+ * Upgrade it's state to CPU_STATE_OFFLINE.
+ */
+ set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
+ BUG_ON(plpar_hcall_norets(H_PROD, intserv[i])
+ != H_SUCCESS);
+ __cpu_die(cpu);
+ break;
+ }
+ if (cpu == num_possible_cpus())
+ printk(KERN_WARNING "Could not find cpu to offline "
+ "with physical id 0x%x\n", intserv[i]);
+ }
+ cpu_maps_update_done();
+
+out:
+ return rc;
+
+}
+
+static ssize_t dlpar_cpu_release(const char *buf, size_t count)
+{
+ struct device_node *dn;
+ const u32 *drc_index;
+ int rc;
+
+ dn = of_find_node_by_path(buf);
+ if (!dn)
+ return -EINVAL;
+
+ drc_index = of_get_property(dn, "ibm,my-drc-index", NULL);
+ if (!drc_index) {
+ of_node_put(dn);
+ return -EINVAL;
+ }
+
+ cpu_hotplug_driver_lock();
+ rc = dlpar_offline_cpu(dn);
+ if (rc) {
+ of_node_put(dn);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rc = dlpar_release_drc(*drc_index);
+ if (rc) {
+ of_node_put(dn);
+ goto out;
+ }
+
+ rc = dlpar_detach_node(dn);
+ if (rc) {
+ dlpar_acquire_drc(*drc_index);
+ goto out;
+ }
+
+ of_node_put(dn);
+out:
+ cpu_hotplug_driver_unlock();
+ return rc ? rc : count;
+}
+
+static int __init pseries_dlpar_init(void)
+{
+ ppc_md.cpu_probe = dlpar_cpu_probe;
+ ppc_md.cpu_release = dlpar_cpu_release;
+
+ return 0;
+}
+machine_device_initcall(pseries, pseries_dlpar_init);
+
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
}
#endif
-/**
- * irq_in_use - return true if this irq is being used
- */
-static int irq_in_use(unsigned int irq)
-{
- int rc = 0;
- unsigned long flags;
- struct irq_desc *desc = irq_desc + irq;
-
- spin_lock_irqsave(&desc->lock, flags);
- if (desc->action)
- rc = 1;
- spin_unlock_irqrestore(&desc->lock, flags);
- return rc;
-}
-
/**
* eeh_disable_irq - disable interrupt for the recovering device
*/
if (dev->msi_enabled || dev->msix_enabled)
return;
- if (!irq_in_use(dev->irq))
+ if (!irq_has_action(dev->irq))
return;
PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
#include <asm/pSeries_reconfig.h>
#include "xics.h"
#include "plpar_wrappers.h"
+#include "offline_states.h"
/* This version can't take the spinlock, because it never returns */
static struct rtas_args rtas_stop_self_args = {
.rets = &rtas_stop_self_args.args[0],
};
+static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) =
+ CPU_STATE_OFFLINE;
+static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE;
+
+static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE;
+
+static int cede_offline_enabled __read_mostly = 1;
+
+/*
+ * Enable/disable cede_offline when available.
+ */
+static int __init setup_cede_offline(char *str)
+{
+ if (!strcmp(str, "off"))
+ cede_offline_enabled = 0;
+ else if (!strcmp(str, "on"))
+ cede_offline_enabled = 1;
+ else
+ return 0;
+ return 1;
+}
+
+__setup("cede_offline=", setup_cede_offline);
+
+enum cpu_state_vals get_cpu_current_state(int cpu)
+{
+ return per_cpu(current_state, cpu);
+}
+
+void set_cpu_current_state(int cpu, enum cpu_state_vals state)
+{
+ per_cpu(current_state, cpu) = state;
+}
+
+enum cpu_state_vals get_preferred_offline_state(int cpu)
+{
+ return per_cpu(preferred_offline_state, cpu);
+}
+
+void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
+{
+ per_cpu(preferred_offline_state, cpu) = state;
+}
+
+void set_default_offline_state(int cpu)
+{
+ per_cpu(preferred_offline_state, cpu) = default_offline_state;
+}
+
static void rtas_stop_self(void)
{
struct rtas_args *args = &rtas_stop_self_args;
static void pseries_mach_cpu_die(void)
{
+ unsigned int cpu = smp_processor_id();
+ unsigned int hwcpu = hard_smp_processor_id();
+ u8 cede_latency_hint = 0;
+
local_irq_disable();
idle_task_exit();
xics_teardown_cpu();
- unregister_slb_shadow(hard_smp_processor_id(), __pa(get_slb_shadow()));
- rtas_stop_self();
+
+ if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+ set_cpu_current_state(cpu, CPU_STATE_INACTIVE);
+ cede_latency_hint = 2;
+
+ get_lppaca()->idle = 1;
+ if (!get_lppaca()->shared_proc)
+ get_lppaca()->donate_dedicated_cpu = 1;
+
+ printk(KERN_INFO
+ "cpu %u (hwid %u) ceding for offline with hint %d\n",
+ cpu, hwcpu, cede_latency_hint);
+ while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+ extended_cede_processor(cede_latency_hint);
+ printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n",
+ cpu, hwcpu);
+ printk(KERN_INFO
+ "Decrementer value = %x Timebase value = %llx\n",
+ get_dec(), get_tb());
+ }
+
+ printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n",
+ cpu, hwcpu);
+
+ if (!get_lppaca()->shared_proc)
+ get_lppaca()->donate_dedicated_cpu = 0;
+ get_lppaca()->idle = 0;
+ }
+
+ if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
+ unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+
+ /*
+ * NOTE: Calling start_secondary() here for now to
+ * start new context.
+ * However, need to do it cleanly by resetting the
+ * stack pointer.
+ */
+ start_secondary();
+
+ } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
+
+ set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
+ unregister_slb_shadow(hard_smp_processor_id(),
+ __pa(get_slb_shadow()));
+ rtas_stop_self();
+ }
+
/* Should never get here... */
BUG();
for(;;);
return 0;
}
+/*
+ * pseries_cpu_die: Wait for the cpu to die.
+ * @cpu: logical processor id of the CPU whose death we're awaiting.
+ *
+ * This function is called from the context of the thread which is performing
+ * the cpu-offline. Here we wait for long enough to allow the cpu in question
+ * to self-destroy so that the cpu-offline thread can send the CPU_DEAD
+ * notifications.
+ *
+ * OTOH, pseries_mach_cpu_die() is called by the @cpu when it wants to
+ * self-destruct.
+ */
static void pseries_cpu_die(unsigned int cpu)
{
int tries;
- int cpu_status;
+ int cpu_status = 1;
unsigned int pcpu = get_hard_smp_processor_id(cpu);
- for (tries = 0; tries < 25; tries++) {
- cpu_status = query_cpu_stopped(pcpu);
- if (cpu_status == 0 || cpu_status == -1)
- break;
- cpu_relax();
+ if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+ cpu_status = 1;
+ for (tries = 0; tries < 1000; tries++) {
+ if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) {
+ cpu_status = 0;
+ break;
+ }
+ cpu_relax();
+ }
+ } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
+
+ for (tries = 0; tries < 25; tries++) {
+ cpu_status = query_cpu_stopped(pcpu);
+ if (cpu_status == 0 || cpu_status == -1)
+ break;
+ cpu_relax();
+ }
}
+
if (cpu_status != 0) {
printk("Querying DEAD? cpu %i (%i) shows %i\n",
cpu, pcpu, cpu_status);
.notifier_call = pseries_smp_notifier,
};
+#define MAX_CEDE_LATENCY_LEVELS 4
+#define CEDE_LATENCY_PARAM_LENGTH 10
+#define CEDE_LATENCY_PARAM_MAX_LENGTH \
+ (MAX_CEDE_LATENCY_LEVELS * CEDE_LATENCY_PARAM_LENGTH * sizeof(char))
+#define CEDE_LATENCY_TOKEN 45
+
+static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH];
+
+static int parse_cede_parameters(void)
+{
+ int call_status;
+
+ memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH);
+ call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+ NULL,
+ CEDE_LATENCY_TOKEN,
+ __pa(cede_parameters),
+ CEDE_LATENCY_PARAM_MAX_LENGTH);
+
+ if (call_status != 0)
+ printk(KERN_INFO "CEDE_LATENCY: \
+ %s %s Error calling get-system-parameter(0x%x)\n",
+ __FILE__, __func__, call_status);
+ else
+ printk(KERN_INFO "CEDE_LATENCY: \
+ get-system-parameter successful.\n");
+
+ return call_status;
+}
+
static int __init pseries_cpu_hotplug_init(void)
{
struct device_node *np;
const char *typep;
+ int cpu;
for_each_node_by_name(np, "interrupt-controller") {
typep = of_get_property(np, "compatible", NULL);
smp_ops->cpu_die = pseries_cpu_die;
/* Processors can be added/removed only on LPAR */
- if (firmware_has_feature(FW_FEATURE_LPAR))
+ if (firmware_has_feature(FW_FEATURE_LPAR)) {
pSeries_reconfig_notifier_register(&pseries_smp_nb);
+ cpu_maps_update_begin();
+ if (cede_offline_enabled && parse_cede_parameters() == 0) {
+ default_offline_state = CPU_STATE_INACTIVE;
+ for_each_online_cpu(cpu)
+ set_default_offline_state(cpu);
+ }
+ cpu_maps_update_done();
+ }
return 0;
}
--- /dev/null
+#ifndef _OFFLINE_STATES_H_
+#define _OFFLINE_STATES_H_
+
+/* Cpu offline states go here */
+enum cpu_state_vals {
+ CPU_STATE_OFFLINE,
+ CPU_STATE_INACTIVE,
+ CPU_STATE_ONLINE,
+ CPU_MAX_OFFLINE_STATES
+};
+
+extern enum cpu_state_vals get_cpu_current_state(int cpu);
+extern void set_cpu_current_state(int cpu, enum cpu_state_vals state);
+extern enum cpu_state_vals get_preferred_offline_state(int cpu);
+extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state);
+extern void set_default_offline_state(int cpu);
+extern int start_secondary(void);
+#endif
return plpar_hcall_norets(H_POLL_PENDING);
}
+static inline u8 get_cede_latency_hint(void)
+{
+ return get_lppaca()->gpr5_dword.fields.cede_latency_hint;
+}
+
+static inline void set_cede_latency_hint(u8 latency_hint)
+{
+ get_lppaca()->gpr5_dword.fields.cede_latency_hint = latency_hint;
+}
+
static inline long cede_processor(void)
{
return plpar_hcall_norets(H_CEDE);
}
+static inline long extended_cede_processor(unsigned long latency_hint)
+{
+ long rc;
+ u8 old_latency_hint = get_cede_latency_hint();
+
+ set_cede_latency_hint(latency_hint);
+ rc = cede_processor();
+ set_cede_latency_hint(old_latency_hint);
+
+ return rc;
+}
+
static inline long vpa_call(unsigned long flags, unsigned long cpu,
unsigned long vpa)
{
return parent;
}
-static BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain);
+BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain);
int pSeries_reconfig_notifier_register(struct notifier_block *nb)
{
}
/*
- * /proc/ppc64/ofdt - yucky binary interface for adding and removing
+ * /proc/powerpc/ofdt - yucky binary interface for adding and removing
* OF device nodes. Should be deprecated as soon as we get an
* in-kernel wrapper for the RTAS ibm,configure-connector call.
*/
.write = ofdt_write
};
-/* create /proc/ppc64/ofdt write-only by root */
+/* create /proc/powerpc/ofdt write-only by root */
static int proc_ppc64_create_ofdt(void)
{
struct proc_dir_entry *ent;
if (!machine_is(pseries))
return 0;
- ent = proc_create("ppc64/ofdt", S_IWUSR, NULL, &ofdt_fops);
+ ent = proc_create("powerpc/ofdt", S_IWUSR, NULL, &ofdt_fops);
if (ent)
ent->size = 0;
* of this data using this driver. A dump exists if the device-tree
* /chosen/ibm,scan-log-data property exists.
*
- * This driver exports /proc/ppc64/scan-log-dump which can be read.
+ * This driver exports /proc/powerpc/scan-log-dump which can be read.
* The driver supports only sequential reads.
*
* The driver looks at a write to the driver for the single word "reset".
if (!data)
goto err;
- ent = proc_create_data("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+ ent = proc_create_data("powerpc/rtas/scan-log-dump", S_IRUSR, NULL,
&scanlog_fops, data);
if (!ent)
goto err;
#include "plpar_wrappers.h"
#include "pseries.h"
#include "xics.h"
+#include "offline_states.h"
/*
/* Fixup atomic count: it exited inside IRQ handler. */
task_thread_info(paca[lcpu].__current)->preempt_count = 0;
+ if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
+ goto out;
+
/*
* If the RTAS start-cpu token does not exist then presume the
* cpu is already spinning.
return 0;
}
+out:
return 1;
}
vpa_init(cpu);
cpu_clear(cpu, of_spin_map);
+ set_cpu_current_state(cpu, CPU_STATE_ONLINE);
+ set_default_offline_state(cpu);
}
#endif /* CONFIG_XICS */
static void __devinit smp_pSeries_kick_cpu(int nr)
{
+ long rc;
+ unsigned long hcpuid;
BUG_ON(nr < 0 || nr >= NR_CPUS);
if (!smp_startup_cpu(nr))
* the processor will continue on to secondary_start
*/
paca[nr].cpu_start = 1;
+
+ set_preferred_offline_state(nr, CPU_STATE_ONLINE);
+
+ if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
+ hcpuid = get_hard_smp_processor_id(nr);
+ rc = plpar_hcall_norets(H_PROD, hcpuid);
+ if (rc != H_SUCCESS)
+ panic("Error: Prod to wake up processor %d Ret= %ld\n",
+ nr, rc);
+ }
}
static int smp_pSeries_cpu_bootable(unsigned int nr)
#include <linux/cpu.h>
#include <linux/msi.h>
#include <linux/of.h>
+#include <linux/percpu.h>
#include <asm/firmware.h>
#include <asm/io.h>
*/
#define IPI_PRIORITY 4
+/* The least favored priority */
+#define LOWEST_PRIORITY 0xFF
+
+/* The number of priorities defined above */
+#define MAX_NUM_PRIORITIES 3
+
static unsigned int default_server = 0xFF;
static unsigned int default_distrib_server = 0;
static unsigned int interrupt_server_size = 8;
static int ibm_int_on;
static int ibm_int_off;
+struct xics_cppr {
+ unsigned char stack[MAX_NUM_PRIORITIES];
+ int index;
+};
+
+static DEFINE_PER_CPU(struct xics_cppr, xics_cppr);
/* Direct hardware low level accessors */
cpumask_t cpumask;
cpumask_t tmp = CPU_MASK_NONE;
- cpumask_copy(&cpumask, irq_desc[virq].affinity);
+ cpumask_copy(&cpumask, irq_to_desc(virq)->affinity);
if (!distribute_irqs)
return default_server;
return xirr & 0x00ffffff;
}
+static void push_cppr(unsigned int vec)
+{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+ if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1))
+ return;
+
+ if (vec == XICS_IPI)
+ os_cppr->stack[++os_cppr->index] = IPI_PRIORITY;
+ else
+ os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY;
+}
+
static unsigned int xics_get_irq_direct(void)
{
unsigned int xirr = direct_xirr_info_get();
return NO_IRQ;
irq = irq_radix_revmap_lookup(xics_host, vec);
- if (likely(irq != NO_IRQ))
+ if (likely(irq != NO_IRQ)) {
+ push_cppr(vec);
return irq;
+ }
/* We don't have a linux mapping, so have rtas mask it. */
xics_mask_unknown_vec(vec);
return NO_IRQ;
irq = irq_radix_revmap_lookup(xics_host, vec);
- if (likely(irq != NO_IRQ))
+ if (likely(irq != NO_IRQ)) {
+ push_cppr(vec);
return irq;
+ }
/* We don't have a linux mapping, so have RTAS mask it. */
xics_mask_unknown_vec(vec);
return NO_IRQ;
}
+static unsigned char pop_cppr(void)
+{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+ if (WARN_ON(os_cppr->index < 1))
+ return LOWEST_PRIORITY;
+
+ return os_cppr->stack[--os_cppr->index];
+}
+
static void xics_eoi_direct(unsigned int virq)
{
unsigned int irq = (unsigned int)irq_map[virq].hwirq;
iosync();
- direct_xirr_info_set((0xff << 24) | irq);
+ direct_xirr_info_set((pop_cppr() << 24) | irq);
}
static void xics_eoi_lpar(unsigned int virq)
unsigned int irq = (unsigned int)irq_map[virq].hwirq;
iosync();
- lpar_xirr_info_set((0xff << 24) | irq);
+ lpar_xirr_info_set((pop_cppr() << 24) | irq);
}
static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
}
static struct irq_chip xics_pic_direct = {
- .typename = " XICS ",
+ .name = " XICS ",
.startup = xics_startup,
.mask = xics_mask_irq,
.unmask = xics_unmask_irq,
};
static struct irq_chip xics_pic_lpar = {
- .typename = " XICS ",
+ .name = " XICS ",
.startup = xics_startup,
.mask = xics_mask_irq,
.unmask = xics_unmask_irq,
/* Insert the interrupt mapping into the radix tree for fast lookup */
irq_radix_revmap_insert(xics_host, virq, hw);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
return 0;
}
static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
static void xics_set_cpu_priority(unsigned char cppr)
{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+ BUG_ON(os_cppr->index != 0);
+
+ os_cppr->stack[os_cppr->index] = cppr;
+
if (firmware_has_feature(FW_FEATURE_LPAR))
lpar_cppr_info(cppr);
else
void xics_setup_cpu(void)
{
- xics_set_cpu_priority(0xff);
+ xics_set_cpu_priority(LOWEST_PRIORITY);
xics_set_cpu_giq(default_distrib_server, 1);
}
/* We need to get IPIs still. */
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
continue;
- desc = get_irq_desc(virq);
+ desc = irq_to_desc(virq);
/* We only need to migrate enabled IRQS */
if (desc == NULL || desc->chip == NULL
virq, cpu);
/* Reset affinity to all cpus */
- cpumask_setall(irq_desc[virq].affinity);
+ cpumask_setall(irq_to_desc(virq)->affinity);
desc->chip->set_affinity(virq, cpu_all_mask);
unlock:
spin_unlock_irqrestore(&desc->lock, flags);
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
+obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
}
static struct irq_chip cpm_pic = {
- .typename = " CPM PIC ",
+ .name = " CPM PIC ",
.mask = cpm_mask_irq,
.unmask = cpm_unmask_irq,
.eoi = cpm_end_irq,
{
pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
return 0;
}
static void cpm2_end_irq(unsigned int virq)
{
+ struct irq_desc *desc;
int bit, word;
unsigned int irq_nr = virq_to_hw(virq);
- if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
- && irq_desc[irq_nr].action) {
+ desc = irq_to_desc(irq_nr);
+ if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))
+ && desc->action) {
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
{
unsigned int src = virq_to_hw(virq);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
unsigned int vold, vnew, edibit;
if (flow_type == IRQ_TYPE_NONE)
}
static struct irq_chip cpm2_pic = {
- .typename = " CPM2 SIU ",
+ .name = " CPM2 SIU ",
.mask = cpm2_mask_irq,
.unmask = cpm2_unmask_irq,
.ack = cpm2_ack,
{
pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq);
return 0;
}
static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
*out_hwirq = intspec[0];
/* Max address size we deal with */
#define OF_MAX_ADDR_CELLS 4
-int __init cpm_muram_init(void)
+int cpm_muram_init(void)
{
struct device_node *np;
struct resource r;
int i = 0;
int ret = 0;
+ if (muram_pbase)
+ return 0;
+
spin_lock_init(&cpm_muram_lock);
/* initialize the info header */
rh_init(&cpm_muram_info, 1,
.mask = mask_msi_irq,
.unmask = unmask_msi_irq,
.ack = fsl_msi_end_irq,
- .typename = " FSL-MSI ",
+ .name = " FSL-MSI ",
};
static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
{
struct irq_chip *chip = &fsl_msi_chip;
- get_irq_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
+ irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
set_irq_chip_and_handler(virq, chip, handle_edge_irq);
return 0;
}
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
-#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header);
+#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
--- /dev/null
+/*
+ * Suspend/resume support
+ *
+ * Copyright 2009 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/suspend.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+
+struct pmc_regs {
+ __be32 devdisr;
+ __be32 devdisr2;
+ __be32 :32;
+ __be32 :32;
+ __be32 pmcsr;
+#define PMCSR_SLP (1 << 17)
+};
+
+static struct device *pmc_dev;
+static struct pmc_regs __iomem *pmc_regs;
+
+static int pmc_suspend_enter(suspend_state_t state)
+{
+ int ret;
+
+ setbits32(&pmc_regs->pmcsr, PMCSR_SLP);
+ /* At this point, the CPU is asleep. */
+
+ /* Upon resume, wait for SLP bit to be clear. */
+ ret = spin_event_timeout((in_be32(&pmc_regs->pmcsr) & PMCSR_SLP) == 0,
+ 10000, 10) ? 0 : -ETIMEDOUT;
+ if (ret)
+ dev_err(pmc_dev, "tired waiting for SLP bit to clear\n");
+ return ret;
+}
+
+static int pmc_suspend_valid(suspend_state_t state)
+{
+ if (state != PM_SUSPEND_STANDBY)
+ return 0;
+ return 1;
+}
+
+static struct platform_suspend_ops pmc_suspend_ops = {
+ .valid = pmc_suspend_valid,
+ .enter = pmc_suspend_enter,
+};
+
+static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+ pmc_regs = of_iomap(ofdev->node, 0);
+ if (!pmc_regs)
+ return -ENOMEM;
+
+ pmc_dev = &ofdev->dev;
+ suspend_set_ops(&pmc_suspend_ops);
+ return 0;
+}
+
+static const struct of_device_id pmc_ids[] = {
+ { .compatible = "fsl,mpc8548-pmc", },
+ { .compatible = "fsl,mpc8641d-pmc", },
+ { },
+};
+
+static struct of_platform_driver pmc_driver = {
+ .driver.name = "fsl-pmc",
+ .match_table = pmc_ids,
+ .probe = pmc_probe,
+};
+
+static int __init pmc_init(void)
+{
+ return of_register_platform_driver(&pmc_driver);
+}
+device_initcall(pmc_init);
arch_initcall(fsl_usb_of_init);
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static __be32 __iomem *rstcr;
static int __init setup_rstcr(void)
}
static struct irq_chip i8259_pic = {
- .typename = " i8259 ",
+ .name = " i8259 ",
.mask = i8259_mask_irq,
.disable = i8259_mask_irq,
.unmask = i8259_unmask_irq,
/* We block the internal cascade */
if (hw == 2)
- get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+ irq_to_desc(virq)->status |= IRQ_NOREQUEST;
/* We use the level handler only for now, we might want to
* be more cautious here but that works for now
*/
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq);
return 0;
}
}
static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
static unsigned char map_isa_senses[4] = {
{
struct ipic *ipic = ipic_from_irq(virq);
unsigned int src = ipic_irq_to_hw(virq);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
unsigned int vold, vnew, edibit;
if (flow_type == IRQ_TYPE_NONE)
/* level interrupts and edge interrupts have different ack operations */
static struct irq_chip ipic_level_irq_chip = {
- .typename = " IPIC ",
+ .name = " IPIC ",
.unmask = ipic_unmask_irq,
.mask = ipic_mask_irq,
.mask_ack = ipic_mask_irq,
};
static struct irq_chip ipic_edge_irq_chip = {
- .typename = " IPIC ",
+ .name = " IPIC ",
.unmask = ipic_unmask_irq,
.mask = ipic_mask_irq,
.mask_ack = ipic_mask_irq_and_ack,
}
static int ipic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
}
static struct irq_chip mpc8xx_pic = {
- .typename = " MPC8XX SIU ",
+ .name = " MPC8XX SIU ",
.unmask = mpc8xx_unmask_irq,
.mask = mpc8xx_mask_irq,
.ack = mpc8xx_ack,
static int mpc8xx_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
static unsigned char map_pic_senses[4] = {
cpumask_t mask;
int cpuid;
- cpumask_copy(&mask, irq_desc[virt_irq].affinity);
+ cpumask_copy(&mask, irq_to_desc(virt_irq)->affinity);
if (cpus_equal(mask, CPU_MASK_ALL)) {
static int irq_rover;
static DEFINE_SPINLOCK(irq_rover_lock);
if (irq < NUM_ISA_INTERRUPTS)
return NULL;
- return irq_desc[irq].chip_data;
+ return irq_to_desc(irq)->chip_data;
}
/* Determine if the linux irq is an IPI */
/* Get the mpic structure from the IPI number */
static inline struct mpic * mpic_from_ipi(unsigned int ipi)
{
- return irq_desc[ipi].chip_data;
+ return irq_to_desc(ipi)->chip_data;
}
#endif
/* Get the mpic structure from the irq number */
static inline struct mpic * mpic_from_irq(unsigned int irq)
{
- return irq_desc[irq].chip_data;
+ return irq_to_desc(irq)->chip_data;
}
/* Send an EOI */
mpic_unmask_irq(irq);
- if (irq_desc[irq].status & IRQ_LEVEL)
+ if (irq_to_desc(irq)->status & IRQ_LEVEL)
mpic_ht_end_irq(mpic, src);
}
unsigned int src = mpic_irq_to_hw(irq);
mpic_unmask_irq(irq);
- mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
+ mpic_startup_ht_interrupt(mpic, src, irq_to_desc(irq)->status);
return 0;
}
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
- mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+ mpic_shutdown_ht_interrupt(mpic, src, irq_to_desc(irq)->status);
mpic_mask_irq(irq);
}
* latched another edge interrupt coming in anyway
*/
- if (irq_desc[irq].status & IRQ_LEVEL)
+ if (irq_to_desc(irq)->status & IRQ_LEVEL)
mpic_ht_end_irq(mpic, src);
mpic_eoi(mpic);
}
{
struct mpic *mpic = mpic_from_irq(virq);
unsigned int src = mpic_irq_to_hw(virq);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
unsigned int vecpri, vold, vnew;
DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
}
static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
mpic->name = name;
mpic->hc_irq = mpic_irq_chip;
- mpic->hc_irq.typename = name;
+ mpic->hc_irq.name = name;
if (flags & MPIC_PRIMARY)
mpic->hc_irq.set_affinity = mpic_set_affinity;
#ifdef CONFIG_MPIC_U3_HT_IRQS
mpic->hc_ht_irq = mpic_irq_ht_chip;
- mpic->hc_ht_irq.typename = name;
+ mpic->hc_ht_irq.name = name;
if (flags & MPIC_PRIMARY)
mpic->hc_ht_irq.set_affinity = mpic_set_affinity;
#endif /* CONFIG_MPIC_U3_HT_IRQS */
#ifdef CONFIG_SMP
mpic->hc_ipi = mpic_ipi_chip;
- mpic->hc_ipi.typename = name;
+ mpic->hc_ipi.name = name;
#endif /* CONFIG_SMP */
mpic->flags = flags;
.eoi = mpic_end_irq,
.set_type = mpic_set_irq_type,
.set_affinity = mpic_set_affinity,
- .typename = "PASEMI-MSI ",
+ .name = "PASEMI-MSI ",
};
static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type)
.eoi = mpic_end_irq,
.set_type = mpic_set_irq_type,
.set_affinity = mpic_set_affinity,
- .typename = "MPIC-U3MSI",
+ .name = "MPIC-U3MSI",
};
static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos)
{
int level1;
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET;
BUG_ON(level1 > MV64x60_LEVEL1_GPP);
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
static phys_addr_t qebase = -1;
-int qe_alive_during_sleep(void)
-{
- static int ret = -1;
-
- if (ret != -1)
- return ret;
-
- ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc");
-
- return ret;
-}
-EXPORT_SYMBOL(qe_alive_during_sleep);
-
phys_addr_t get_qe_base(void)
{
struct device_node *qe;
EXPORT_SYMBOL(get_qe_base);
-void __init qe_reset(void)
+void qe_reset(void)
{
if (qe_immr == NULL)
qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
static int qe_sdma_init(void)
{
struct sdma __iomem *sdma = &qe_immr->sdma;
- unsigned long sdma_buf_offset;
+ static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
if (!sdma)
return -ENODEV;
/* allocate 2 internal temporary buffers (512 bytes size each) for
* the SDMA */
- sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
- if (IS_ERR_VALUE(sdma_buf_offset))
- return -ENOMEM;
+ if (IS_ERR_VALUE(sdma_buf_offset)) {
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
+ if (IS_ERR_VALUE(sdma_buf_offset))
+ return -ENOMEM;
+ }
out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
}
/* The maximum number of RISCs we support */
-#define MAX_QE_RISC 2
+#define MAX_QE_RISC 4
/* Firmware information stored here for qe_get_firmware_info() */
static struct qe_firmware_info qe_firmware_info;
return num_of_snums;
}
EXPORT_SYMBOL(qe_get_num_of_snums);
+
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
+static int qe_resume(struct of_device *ofdev)
+{
+ if (!qe_alive_during_sleep())
+ qe_reset();
+ return 0;
+}
+
+static int qe_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+ return 0;
+}
+
+static const struct of_device_id qe_ids[] = {
+ { .compatible = "fsl,qe", },
+ { },
+};
+
+static struct of_platform_driver qe_driver = {
+ .driver.name = "fsl-qe",
+ .match_table = qe_ids,
+ .probe = qe_probe,
+ .resume = qe_resume,
+};
+
+static int __init qe_drv_init(void)
+{
+ return of_register_platform_driver(&qe_driver);
+}
+device_initcall(qe_drv_init);
+#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
{
- return irq_desc[virq].chip_data;
+ return irq_to_desc(virq)->chip_data;
}
#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
}
static struct irq_chip qe_ic_irq_chip = {
- .typename = " QEIC ",
+ .name = " QEIC ",
.unmask = qe_ic_unmask_irq,
.mask = qe_ic_mask_irq,
.mask_ack = qe_ic_mask_irq,
chip = &qe_ic->hc_irq;
set_irq_chip_data(virq, qe_ic);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, chip, handle_level_irq);
}
static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 * intspec, unsigned int intsize,
+ const u32 * intspec, unsigned int intsize,
irq_hw_number_t * out_hwirq,
unsigned int *out_flags)
{
*/
static struct irq_chip tsi108_pci_irq = {
- .typename = "tsi108_PCI_int",
+ .name = "tsi108_PCI_int",
.mask = tsi108_pci_irq_disable,
.ack = tsi108_pci_irq_ack,
.end = tsi108_pci_irq_end,
};
static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
*out_hwirq = intspec[0];
DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
if ((virq >= 1) && (virq <= 4)){
irq = virq + IRQ_PCI_INTAD_BASE - 1;
- get_irq_desc(irq)->status |= IRQ_LEVEL;
+ irq_to_desc(irq)->status |= IRQ_LEVEL;
set_irq_chip(irq, &tsi108_pci_irq);
}
return 0;
static void uic_unmask_irq(unsigned int virq)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
unsigned long flags;
static void uic_mask_ack_irq(unsigned int virq)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
unsigned long flags;
{
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
unsigned long flags;
int trigger, polarity;
u32 tr, pr, mask;
}
static struct irq_chip uic_irq_chip = {
- .typename = " UIC ",
+ .name = " UIC ",
.unmask = uic_unmask_irq,
.mask = uic_mask_irq,
.mask_ack = uic_mask_ack_irq,
}
static int uic_host_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type)
{
static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
}
static struct irq_chip xilinx_intc_level_irqchip = {
- .typename = "Xilinx Level INTC",
+ .name = "Xilinx Level INTC",
.mask = xilinx_intc_mask,
.mask_ack = xilinx_intc_mask,
.unmask = xilinx_intc_level_unmask,
}
static struct irq_chip xilinx_intc_edge_irqchip = {
- .typename = "Xilinx Edge INTC",
+ .name = "Xilinx Edge INTC",
.mask = xilinx_intc_mask,
.unmask = xilinx_intc_edge_unmask,
.ack = xilinx_intc_edge_ack,
* xilinx_intc_xlate - translate virq# from device tree interrupts property
*/
static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
- u32 *intspec, unsigned int intsize,
+ const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
ptrLpPaca->saved_srr0, ptrLpPaca->saved_srr1);
printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n",
ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
- printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
+ printf(" Saved Gpr5=%.16lx \n",
+ ptrLpPaca->gpr5_dword.saved_gpr5);
}
#endif
If unsure, say N.
+config PATA_MACIO
+ tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
+ depends on PPC_PMAC
+ help
+ Most IDE capable PowerMacs have IDE busses driven by a variant
+ of this controller which is part of the Apple chipset used on
+ most PowerMac models. Some models have multiple busses using
+ different chipsets, though generally, MacIO is one of them.
+
+
endif # ATA_SFF
endif # ATA
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
+obj-$(CONFIG_PATA_MACIO) += pata_macio.o
obj-$(CONFIG_PATA_ALI) += pata_ali.o
obj-$(CONFIG_PATA_AMD) += pata_amd.o
--- /dev/null
+/*
+ * Libata based driver for Apple "macio" family of PATA controllers
+ *
+ * Copyright 2008/2009 Benjamin Herrenschmidt, IBM Corp
+ * <benh@kernel.crashing.org>
+ *
+ * Some bits and pieces from drivers/ide/ppc/pmac.c
+ *
+ */
+
+#undef DEBUG
+#undef DEBUG_DMA
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/scatterlist.h>
+#include <linux/of.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+
+#include <asm/macio.h>
+#include <asm/io.h>
+#include <asm/dbdma.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/mediabay.h>
+
+#ifdef DEBUG_DMA
+#define dev_dbgdma(dev, format, arg...) \
+ dev_printk(KERN_DEBUG , dev , format , ## arg)
+#else
+#define dev_dbgdma(dev, format, arg...) \
+ ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; })
+#endif
+
+#define DRV_NAME "pata_macio"
+#define DRV_VERSION "0.9"
+
+/* Models of macio ATA controller */
+enum {
+ controller_ohare, /* OHare based */
+ controller_heathrow, /* Heathrow/Paddington */
+ controller_kl_ata3, /* KeyLargo ATA-3 */
+ controller_kl_ata4, /* KeyLargo ATA-4 */
+ controller_un_ata6, /* UniNorth2 ATA-6 */
+ controller_k2_ata6, /* K2 ATA-6 */
+ controller_sh_ata6, /* Shasta ATA-6 */
+};
+
+static const char* macio_ata_names[] = {
+ "OHare ATA", /* OHare based */
+ "Heathrow ATA", /* Heathrow/Paddington */
+ "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */
+ "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */
+ "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */
+ "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */
+ "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */
+};
+
+/*
+ * Extra registers, both 32-bit little-endian
+ */
+#define IDE_TIMING_CONFIG 0x200
+#define IDE_INTERRUPT 0x300
+
+/* Kauai (U2) ATA has different register setup */
+#define IDE_KAUAI_PIO_CONFIG 0x200
+#define IDE_KAUAI_ULTRA_CONFIG 0x210
+#define IDE_KAUAI_POLL_CONFIG 0x220
+
+/*
+ * Timing configuration register definitions
+ */
+
+/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
+#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
+#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
+#define IDE_SYSCLK_NS 30 /* 33Mhz cell */
+#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
+
+/* 133Mhz cell, found in shasta.
+ * See comments about 100 Mhz Uninorth 2...
+ * Note that PIO_MASK and MDMA_MASK seem to overlap, that's just
+ * weird and I don't now why .. at this stage
+ */
+#define TR_133_PIOREG_PIO_MASK 0xff000fff
+#define TR_133_PIOREG_MDMA_MASK 0x00fff800
+#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff
+#define TR_133_UDMAREG_UDMA_EN 0x00000001
+
+/* 100Mhz cell, found in Uninorth 2 and K2. It appears as a pci device
+ * (106b/0033) on uninorth or K2 internal PCI bus and it's clock is
+ * controlled like gem or fw. It appears to be an evolution of keylargo
+ * ATA4 with a timing register extended to 2x32bits registers (one
+ * for PIO & MWDMA and one for UDMA, and a similar DBDMA channel.
+ * It has it's own local feature control register as well.
+ *
+ * After scratching my mind over the timing values, at least for PIO
+ * and MDMA, I think I've figured the format of the timing register,
+ * though I use pre-calculated tables for UDMA as usual...
+ */
+#define TR_100_PIO_ADDRSETUP_MASK 0xff000000 /* Size of field unknown */
+#define TR_100_PIO_ADDRSETUP_SHIFT 24
+#define TR_100_MDMA_MASK 0x00fff000
+#define TR_100_MDMA_RECOVERY_MASK 0x00fc0000
+#define TR_100_MDMA_RECOVERY_SHIFT 18
+#define TR_100_MDMA_ACCESS_MASK 0x0003f000
+#define TR_100_MDMA_ACCESS_SHIFT 12
+#define TR_100_PIO_MASK 0xff000fff
+#define TR_100_PIO_RECOVERY_MASK 0x00000fc0
+#define TR_100_PIO_RECOVERY_SHIFT 6
+#define TR_100_PIO_ACCESS_MASK 0x0000003f
+#define TR_100_PIO_ACCESS_SHIFT 0
+
+#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff
+#define TR_100_UDMAREG_UDMA_EN 0x00000001
+
+
+/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
+ * 40 connector cable and to 4 on 80 connector one.
+ * Clock unit is 15ns (66Mhz)
+ *
+ * 3 Values can be programmed:
+ * - Write data setup, which appears to match the cycle time. They
+ * also call it DIOW setup.
+ * - Ready to pause time (from spec)
+ * - Address setup. That one is weird. I don't see where exactly
+ * it fits in UDMA cycles, I got it's name from an obscure piece
+ * of commented out code in Darwin. They leave it to 0, we do as
+ * well, despite a comment that would lead to think it has a
+ * min value of 45ns.
+ * Apple also add 60ns to the write data setup (or cycle time ?) on
+ * reads.
+ */
+#define TR_66_UDMA_MASK 0xfff00000
+#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
+#define TR_66_PIO_ADDRSETUP_MASK 0xe0000000 /* Address setup */
+#define TR_66_PIO_ADDRSETUP_SHIFT 29
+#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
+#define TR_66_UDMA_RDY2PAUS_SHIFT 25
+#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
+#define TR_66_UDMA_WRDATASETUP_SHIFT 21
+#define TR_66_MDMA_MASK 0x000ffc00
+#define TR_66_MDMA_RECOVERY_MASK 0x000f8000
+#define TR_66_MDMA_RECOVERY_SHIFT 15
+#define TR_66_MDMA_ACCESS_MASK 0x00007c00
+#define TR_66_MDMA_ACCESS_SHIFT 10
+#define TR_66_PIO_MASK 0xe00003ff
+#define TR_66_PIO_RECOVERY_MASK 0x000003e0
+#define TR_66_PIO_RECOVERY_SHIFT 5
+#define TR_66_PIO_ACCESS_MASK 0x0000001f
+#define TR_66_PIO_ACCESS_SHIFT 0
+
+/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
+ * Can do pio & mdma modes, clock unit is 30ns (33Mhz)
+ *
+ * The access time and recovery time can be programmed. Some older
+ * Darwin code base limit OHare to 150ns cycle time. I decided to do
+ * the same here fore safety against broken old hardware ;)
+ * The HalfTick bit, when set, adds half a clock (15ns) to the access
+ * time and removes one from recovery. It's not supported on KeyLargo
+ * implementation afaik. The E bit appears to be set for PIO mode 0 and
+ * is used to reach long timings used in this mode.
+ */
+#define TR_33_MDMA_MASK 0x003ff800
+#define TR_33_MDMA_RECOVERY_MASK 0x001f0000
+#define TR_33_MDMA_RECOVERY_SHIFT 16
+#define TR_33_MDMA_ACCESS_MASK 0x0000f800
+#define TR_33_MDMA_ACCESS_SHIFT 11
+#define TR_33_MDMA_HALFTICK 0x00200000
+#define TR_33_PIO_MASK 0x000007ff
+#define TR_33_PIO_E 0x00000400
+#define TR_33_PIO_RECOVERY_MASK 0x000003e0
+#define TR_33_PIO_RECOVERY_SHIFT 5
+#define TR_33_PIO_ACCESS_MASK 0x0000001f
+#define TR_33_PIO_ACCESS_SHIFT 0
+
+/*
+ * Interrupt register definitions. Only present on newer cells
+ * (Keylargo and later afaik) so we don't use it.
+ */
+#define IDE_INTR_DMA 0x80000000
+#define IDE_INTR_DEVICE 0x40000000
+
+/*
+ * FCR Register on Kauai. Not sure what bit 0x4 is ...
+ */
+#define KAUAI_FCR_UATA_MAGIC 0x00000004
+#define KAUAI_FCR_UATA_RESET_N 0x00000002
+#define KAUAI_FCR_UATA_ENABLE 0x00000001
+
+
+/* Allow up to 256 DBDMA commands per xfer */
+#define MAX_DCMDS 256
+
+/* Don't let a DMA segment go all the way to 64K */
+#define MAX_DBDMA_SEG 0xff00
+
+
+/*
+ * Wait 1s for disk to answer on IDE bus after a hard reset
+ * of the device (via GPIO/FCR).
+ *
+ * Some devices seem to "pollute" the bus even after dropping
+ * the BSY bit (typically some combo drives slave on the UDMA
+ * bus) after a hard reset. Since we hard reset all drives on
+ * KeyLargo ATA66, we have to keep that delay around. I may end
+ * up not hard resetting anymore on these and keep the delay only
+ * for older interfaces instead (we have to reset when coming
+ * from MacOS...) --BenH.
+ */
+#define IDE_WAKEUP_DELAY_MS 1000
+
+struct pata_macio_timing;
+
+struct pata_macio_priv {
+ int kind;
+ int aapl_bus_id;
+ int mediabay : 1;
+ struct device_node *node;
+ struct macio_dev *mdev;
+ struct pci_dev *pdev;
+ struct device *dev;
+ int irq;
+ u32 treg[2][2];
+ void __iomem *tfregs;
+ void __iomem *kauai_fcr;
+ struct dbdma_cmd * dma_table_cpu;
+ dma_addr_t dma_table_dma;
+ struct ata_host *host;
+ const struct pata_macio_timing *timings;
+};
+
+/* Previous variants of this driver used to calculate timings
+ * for various variants of the chip and use tables for others.
+ *
+ * Not only was this confusing, but in addition, it isn't clear
+ * whether our calculation code was correct. It didn't entirely
+ * match the darwin code and whatever documentation I could find
+ * on these cells
+ *
+ * I decided to entirely rely on a table instead for this version
+ * of the driver. Also, because I don't really care about derated
+ * modes and really old HW other than making it work, I'm not going
+ * to calculate / snoop timing values for something else than the
+ * standard modes.
+ */
+struct pata_macio_timing {
+ int mode;
+ u32 reg1; /* Bits to set in first timing reg */
+ u32 reg2; /* Bits to set in second timing reg */
+};
+
+static const struct pata_macio_timing pata_macio_ohare_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00074000, 0, },
+ { XFER_MW_DMA_1, 0x00221000, 0, },
+ { XFER_MW_DMA_2, 0x00211000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_heathrow_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00074000, 0, },
+ { XFER_MW_DMA_1, 0x00221000, 0, },
+ { XFER_MW_DMA_2, 0x00211000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kl33_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00084000, 0, },
+ { XFER_MW_DMA_1, 0x00021800, 0, },
+ { XFER_MW_DMA_2, 0x00011800, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kl66_timings[] = {
+ { XFER_PIO_0, 0x0000038c, 0, },
+ { XFER_PIO_1, 0x0000020a, 0, },
+ { XFER_PIO_2, 0x00000127, 0, },
+ { XFER_PIO_3, 0x000000c6, 0, },
+ { XFER_PIO_4, 0x00000065, 0, },
+ { XFER_MW_DMA_0, 0x00084000, 0, },
+ { XFER_MW_DMA_1, 0x00029800, 0, },
+ { XFER_MW_DMA_2, 0x00019400, 0, },
+ { XFER_UDMA_0, 0x19100000, 0, },
+ { XFER_UDMA_1, 0x14d00000, 0, },
+ { XFER_UDMA_2, 0x10900000, 0, },
+ { XFER_UDMA_3, 0x0c700000, 0, },
+ { XFER_UDMA_4, 0x0c500000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kauai_timings[] = {
+ { XFER_PIO_0, 0x08000a92, 0, },
+ { XFER_PIO_1, 0x0800060f, 0, },
+ { XFER_PIO_2, 0x0800038b, 0, },
+ { XFER_PIO_3, 0x05000249, 0, },
+ { XFER_PIO_4, 0x04000148, 0, },
+ { XFER_MW_DMA_0, 0x00618000, 0, },
+ { XFER_MW_DMA_1, 0x00209000, 0, },
+ { XFER_MW_DMA_2, 0x00148000, 0, },
+ { XFER_UDMA_0, 0, 0x000070c1, },
+ { XFER_UDMA_1, 0, 0x00005d81, },
+ { XFER_UDMA_2, 0, 0x00004a61, },
+ { XFER_UDMA_3, 0, 0x00003a51, },
+ { XFER_UDMA_4, 0, 0x00002a31, },
+ { XFER_UDMA_5, 0, 0x00002921, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_shasta_timings[] = {
+ { XFER_PIO_0, 0x0a000c97, 0, },
+ { XFER_PIO_1, 0x07000712, 0, },
+ { XFER_PIO_2, 0x040003cd, 0, },
+ { XFER_PIO_3, 0x0500028b, 0, },
+ { XFER_PIO_4, 0x0400010a, 0, },
+ { XFER_MW_DMA_0, 0x00820800, 0, },
+ { XFER_MW_DMA_1, 0x0028b000, 0, },
+ { XFER_MW_DMA_2, 0x001ca000, 0, },
+ { XFER_UDMA_0, 0, 0x00035901, },
+ { XFER_UDMA_1, 0, 0x000348b1, },
+ { XFER_UDMA_2, 0, 0x00033881, },
+ { XFER_UDMA_3, 0, 0x00033861, },
+ { XFER_UDMA_4, 0, 0x00033841, },
+ { XFER_UDMA_5, 0, 0x00033031, },
+ { XFER_UDMA_6, 0, 0x00033021, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing *pata_macio_find_timing(
+ struct pata_macio_priv *priv,
+ int mode)
+{
+ int i;
+
+ for (i = 0; priv->timings[i].mode > 0; i++) {
+ if (priv->timings[i].mode == mode)
+ return &priv->timings[i];
+ }
+ return NULL;
+}
+
+
+static void pata_macio_apply_timings(struct ata_port *ap, unsigned int device)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ void __iomem *rbase = ap->ioaddr.cmd_addr;
+
+ if (priv->kind == controller_sh_ata6 ||
+ priv->kind == controller_un_ata6 ||
+ priv->kind == controller_k2_ata6) {
+ writel(priv->treg[device][0], rbase + IDE_KAUAI_PIO_CONFIG);
+ writel(priv->treg[device][1], rbase + IDE_KAUAI_ULTRA_CONFIG);
+ } else
+ writel(priv->treg[device][0], rbase + IDE_TIMING_CONFIG);
+}
+
+static void pata_macio_dev_select(struct ata_port *ap, unsigned int device)
+{
+ ata_sff_dev_select(ap, device);
+
+ /* Apply timings */
+ pata_macio_apply_timings(ap, device);
+}
+
+static void pata_macio_set_timings(struct ata_port *ap,
+ struct ata_device *adev)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ const struct pata_macio_timing *t;
+
+ dev_dbg(priv->dev, "Set timings: DEV=%d,PIO=0x%x (%s),DMA=0x%x (%s)\n",
+ adev->devno,
+ adev->pio_mode,
+ ata_mode_string(ata_xfer_mode2mask(adev->pio_mode)),
+ adev->dma_mode,
+ ata_mode_string(ata_xfer_mode2mask(adev->dma_mode)));
+
+ /* First clear timings */
+ priv->treg[adev->devno][0] = priv->treg[adev->devno][1] = 0;
+
+ /* Now get the PIO timings */
+ t = pata_macio_find_timing(priv, adev->pio_mode);
+ if (t == NULL) {
+ dev_warn(priv->dev, "Invalid PIO timing requested: 0x%x\n",
+ adev->pio_mode);
+ t = pata_macio_find_timing(priv, XFER_PIO_0);
+ }
+ BUG_ON(t == NULL);
+
+ /* PIO timings only ever use the first treg */
+ priv->treg[adev->devno][0] |= t->reg1;
+
+ /* Now get DMA timings */
+ t = pata_macio_find_timing(priv, adev->dma_mode);
+ if (t == NULL || (t->reg1 == 0 && t->reg2 == 0)) {
+ dev_dbg(priv->dev, "DMA timing not set yet, using MW_DMA_0\n");
+ t = pata_macio_find_timing(priv, XFER_MW_DMA_0);
+ }
+ BUG_ON(t == NULL);
+
+ /* DMA timings can use both tregs */
+ priv->treg[adev->devno][0] |= t->reg1;
+ priv->treg[adev->devno][1] |= t->reg2;
+
+ dev_dbg(priv->dev, " -> %08x %08x\n",
+ priv->treg[adev->devno][0],
+ priv->treg[adev->devno][1]);
+
+ /* Apply to hardware */
+ pata_macio_apply_timings(ap, adev->devno);
+}
+
+/*
+ * Blast some well known "safe" values to the timing registers at init or
+ * wakeup from sleep time, before we do real calculation
+ */
+static void pata_macio_default_timings(struct pata_macio_priv *priv)
+{
+ unsigned int value, value2 = 0;
+
+ switch(priv->kind) {
+ case controller_sh_ata6:
+ value = 0x0a820c97;
+ value2 = 0x00033031;
+ break;
+ case controller_un_ata6:
+ case controller_k2_ata6:
+ value = 0x08618a92;
+ value2 = 0x00002921;
+ break;
+ case controller_kl_ata4:
+ value = 0x0008438c;
+ break;
+ case controller_kl_ata3:
+ value = 0x00084526;
+ break;
+ case controller_heathrow:
+ case controller_ohare:
+ default:
+ value = 0x00074526;
+ break;
+ }
+ priv->treg[0][0] = priv->treg[1][0] = value;
+ priv->treg[0][1] = priv->treg[1][1] = value2;
+}
+
+static int pata_macio_cable_detect(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ /* Get cable type from device-tree */
+ if (priv->kind == controller_kl_ata4 ||
+ priv->kind == controller_un_ata6 ||
+ priv->kind == controller_k2_ata6 ||
+ priv->kind == controller_sh_ata6) {
+ const char* cable = of_get_property(priv->node, "cable-type",
+ NULL);
+ struct device_node *root = of_find_node_by_path("/");
+ const char *model = of_get_property(root, "model", NULL);
+
+ if (cable && !strncmp(cable, "80-", 3)) {
+ /* Some drives fail to detect 80c cable in PowerBook
+ * These machine use proprietary short IDE cable
+ * anyway
+ */
+ if (!strncmp(model, "PowerBook", 9))
+ return ATA_CBL_PATA40_SHORT;
+ else
+ return ATA_CBL_PATA80;
+ }
+ }
+
+ /* G5's seem to have incorrect cable type in device-tree.
+ * Let's assume they always have a 80 conductor cable, this seem to
+ * be always the case unless the user mucked around
+ */
+ if (of_device_is_compatible(priv->node, "K2-UATA") ||
+ of_device_is_compatible(priv->node, "shasta-ata"))
+ return ATA_CBL_PATA80;
+
+ /* Anything else is 40 connectors */
+ return ATA_CBL_PATA40;
+}
+
+static void pata_macio_qc_prep(struct ata_queued_cmd *qc)
+{
+ unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE);
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct scatterlist *sg;
+ struct dbdma_cmd *table;
+ unsigned int si, pi;
+
+ dev_dbgdma(priv->dev, "%s: qc %p flags %lx, write %d dev %d\n",
+ __func__, qc, qc->flags, write, qc->dev->devno);
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ table = (struct dbdma_cmd *) priv->dma_table_cpu;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, sg_len, len;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ /* table overflow should never happen */
+ BUG_ON (pi++ >= MAX_DCMDS);
+
+ len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG;
+ st_le16(&table->command, write ? OUTPUT_MORE: INPUT_MORE);
+ st_le16(&table->req_count, len);
+ st_le32(&table->phy_addr, addr);
+ table->cmd_dep = 0;
+ table->xfer_status = 0;
+ table->res_count = 0;
+ addr += len;
+ sg_len -= len;
+ ++table;
+ }
+ }
+
+ /* Should never happen according to Tejun */
+ BUG_ON(!pi);
+
+ /* Convert the last command to an input/output */
+ table--;
+ st_le16(&table->command, write ? OUTPUT_LAST: INPUT_LAST);
+ table++;
+
+ /* Add the stop command to the end of the list */
+ memset(table, 0, sizeof(struct dbdma_cmd));
+ st_le16(&table->command, DBDMA_STOP);
+
+ dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi);
+}
+
+
+static void pata_macio_freeze(struct ata_port *ap)
+{
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+
+ if (dma_regs) {
+ unsigned int timeout = 1000000;
+
+ /* Make sure DMA controller is stopped */
+ writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma_regs->control);
+ while (--timeout && (readl(&dma_regs->status) & RUN))
+ udelay(1);
+ }
+
+ ata_sff_freeze(ap);
+}
+
+
+static void pata_macio_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ int dev = qc->dev->devno;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ /* Make sure DMA commands updates are visible */
+ writel(priv->dma_table_dma, &dma_regs->cmdptr);
+
+ /* On KeyLargo 66Mhz cell, we need to add 60ns to wrDataSetup on
+ * UDMA reads
+ */
+ if (priv->kind == controller_kl_ata4 &&
+ (priv->treg[dev][0] & TR_66_UDMA_EN)) {
+ void __iomem *rbase = ap->ioaddr.cmd_addr;
+ u32 reg = priv->treg[dev][0];
+
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ reg += 0x00800000;
+ writel(reg, rbase + IDE_TIMING_CONFIG);
+ }
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+
+static void pata_macio_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ writel((RUN << 16) | RUN, &dma_regs->control);
+ /* Make sure it gets to the controller right now */
+ (void)readl(&dma_regs->control);
+}
+
+static void pata_macio_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ unsigned int timeout = 1000000;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ /* Stop the DMA engine and wait for it to full halt */
+ writel (((RUN|WAKE|DEAD) << 16), &dma_regs->control);
+ while (--timeout && (readl(&dma_regs->status) & RUN))
+ udelay(1);
+}
+
+static u8 pata_macio_bmdma_status(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ u32 dstat, rstat = ATA_DMA_INTR;
+ unsigned long timeout = 0;
+
+ dstat = readl(&dma_regs->status);
+
+ dev_dbgdma(priv->dev, "%s: dstat=%x\n", __func__, dstat);
+
+ /* We have two things to deal with here:
+ *
+ * - The dbdma won't stop if the command was started
+ * but completed with an error without transferring all
+ * datas. This happens when bad blocks are met during
+ * a multi-block transfer.
+ *
+ * - The dbdma fifo hasn't yet finished flushing to
+ * to system memory when the disk interrupt occurs.
+ *
+ */
+
+ /* First check for errors */
+ if ((dstat & (RUN|DEAD)) != RUN)
+ rstat |= ATA_DMA_ERR;
+
+ /* If ACTIVE is cleared, the STOP command has been hit and
+ * the transfer is complete. If not, we have to flush the
+ * channel.
+ */
+ if ((dstat & ACTIVE) == 0)
+ return rstat;
+
+ dev_dbgdma(priv->dev, "%s: DMA still active, flushing...\n", __func__);
+
+ /* If dbdma didn't execute the STOP command yet, the
+ * active bit is still set. We consider that we aren't
+ * sharing interrupts (which is hopefully the case with
+ * those controllers) and so we just try to flush the
+ * channel for pending data in the fifo
+ */
+ udelay(1);
+ writel((FLUSH << 16) | FLUSH, &dma_regs->control);
+ for (;;) {
+ udelay(1);
+ dstat = readl(&dma_regs->status);
+ if ((dstat & FLUSH) == 0)
+ break;
+ if (++timeout > 1000) {
+ dev_warn(priv->dev, "timeout flushing DMA\n");
+ rstat |= ATA_DMA_ERR;
+ break;
+ }
+ }
+ return rstat;
+}
+
+/* port_start is when we allocate the DMA command list */
+static int pata_macio_port_start(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ if (ap->ioaddr.bmdma_addr == NULL)
+ return 0;
+
+ /* Allocate space for the DBDMA commands.
+ *
+ * The +2 is +1 for the stop command and +1 to allow for
+ * aligning the start address to a multiple of 16 bytes.
+ */
+ priv->dma_table_cpu =
+ dmam_alloc_coherent(priv->dev,
+ (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
+ &priv->dma_table_dma, GFP_KERNEL);
+ if (priv->dma_table_cpu == NULL) {
+ dev_err(priv->dev, "Unable to allocate DMA command list\n");
+ ap->ioaddr.bmdma_addr = NULL;
+ }
+ return 0;
+}
+
+static void pata_macio_irq_clear(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ /* Nothing to do here */
+
+ dev_dbgdma(priv->dev, "%s\n", __func__);
+}
+
+static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
+{
+ dev_dbg(priv->dev, "Enabling & resetting... \n");
+
+ if (priv->mediabay)
+ return;
+
+ if (priv->kind == controller_ohare && !resume) {
+ /* The code below is having trouble on some ohare machines
+ * (timing related ?). Until I can put my hand on one of these
+ * units, I keep the old way
+ */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 0, 1);
+ } else {
+ int rc;
+
+ /* Reset and enable controller */
+ rc = ppc_md.feature_call(PMAC_FTR_IDE_RESET,
+ priv->node, priv->aapl_bus_id, 1);
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE,
+ priv->node, priv->aapl_bus_id, 1);
+ msleep(10);
+ /* Only bother waiting if there's a reset control */
+ if (rc == 0) {
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET,
+ priv->node, priv->aapl_bus_id, 0);
+ msleep(IDE_WAKEUP_DELAY_MS);
+ }
+ }
+
+ /* If resuming a PCI device, restore the config space here */
+ if (priv->pdev && resume) {
+ int rc;
+
+ pci_restore_state(priv->pdev);
+ rc = pcim_enable_device(priv->pdev);
+ if (rc)
+ dev_printk(KERN_ERR, &priv->pdev->dev,
+ "Failed to enable device after resume (%d)\n", rc);
+ else
+ pci_set_master(priv->pdev);
+ }
+
+ /* On Kauai, initialize the FCR. We don't perform a reset, doesn't really
+ * seem necessary and speeds up the boot process
+ */
+ if (priv->kauai_fcr)
+ writel(KAUAI_FCR_UATA_MAGIC |
+ KAUAI_FCR_UATA_RESET_N |
+ KAUAI_FCR_UATA_ENABLE, priv->kauai_fcr);
+}
+
+/* Hook the standard slave config to fixup some HW related alignment
+ * restrictions
+ */
+static int pata_macio_slave_config(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct pata_macio_priv *priv = ap->private_data;
+ struct ata_device *dev;
+ u16 cmd;
+ int rc;
+
+ /* First call original */
+ rc = ata_scsi_slave_config(sdev);
+ if (rc)
+ return rc;
+
+ /* This is lifted from sata_nv */
+ dev = &ap->link.device[sdev->id];
+
+ /* OHare has issues with non cache aligned DMA on some chipsets */
+ if (priv->kind == controller_ohare) {
+ blk_queue_update_dma_alignment(sdev->request_queue, 31);
+ blk_queue_update_dma_pad(sdev->request_queue, 31);
+
+ /* Tell the world about it */
+ ata_dev_printk(dev, KERN_INFO, "OHare alignment limits applied\n");
+ return 0;
+ }
+
+ /* We only have issues with ATAPI */
+ if (dev->class != ATA_DEV_ATAPI)
+ return 0;
+
+ /* Shasta and K2 seem to have "issues" with reads ... */
+ if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
+ /* Allright these are bad, apply restrictions */
+ blk_queue_update_dma_alignment(sdev->request_queue, 15);
+ blk_queue_update_dma_pad(sdev->request_queue, 15);
+
+ /* We enable MWI and hack cache line size directly here, this
+ * is specific to this chipset and not normal values, we happen
+ * to somewhat know what we are doing here (which is basically
+ * to do the same Apple does and pray they did not get it wrong :-)
+ */
+ BUG_ON(!priv->pdev);
+ pci_write_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, 0x08);
+ pci_read_config_word(priv->pdev, PCI_COMMAND, &cmd);
+ pci_write_config_word(priv->pdev, PCI_COMMAND,
+ cmd | PCI_COMMAND_INVALIDATE);
+
+ /* Tell the world about it */
+ ata_dev_printk(dev, KERN_INFO,
+ "K2/Shasta alignment limits applied\n");
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_do_suspend(struct pata_macio_priv *priv, pm_message_t mesg)
+{
+ int rc;
+
+ /* First, core libata suspend to do most of the work */
+ rc = ata_host_suspend(priv->host, mesg);
+ if (rc)
+ return rc;
+
+ /* Restore to default timings */
+ pata_macio_default_timings(priv);
+
+ /* Mask interrupt. Not strictly necessary but old driver did
+ * it and I'd rather not change that here */
+ disable_irq(priv->irq);
+
+ /* The media bay will handle itself just fine */
+ if (priv->mediabay)
+ return 0;
+
+ /* Kauai has bus control FCRs directly here */
+ if (priv->kauai_fcr) {
+ u32 fcr = readl(priv->kauai_fcr);
+ fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
+ writel(fcr, priv->kauai_fcr);
+ }
+
+ /* For PCI, save state and disable DMA. No need to call
+ * pci_set_power_state(), the HW doesn't do D states that
+ * way, the platform code will take care of suspending the
+ * ASIC properly
+ */
+ if (priv->pdev) {
+ pci_save_state(priv->pdev);
+ pci_disable_device(priv->pdev);
+ }
+
+ /* Disable the bus on older machines and the cell on kauai */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node,
+ priv->aapl_bus_id, 0);
+
+ return 0;
+}
+
+static int pata_macio_do_resume(struct pata_macio_priv *priv)
+{
+ /* Reset and re-enable the HW */
+ pata_macio_reset_hw(priv, 1);
+
+ /* Sanitize drive timings */
+ pata_macio_apply_timings(priv->host->ports[0], 0);
+
+ /* We want our IRQ back ! */
+ enable_irq(priv->irq);
+
+ /* Let the libata core take it from there */
+ ata_host_resume(priv->host);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct scsi_host_template pata_macio_sht = {
+ ATA_BASE_SHT(DRV_NAME),
+ .sg_tablesize = MAX_DCMDS,
+ /* We may not need that strict one */
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = pata_macio_slave_config,
+};
+
+static struct ata_port_operations pata_macio_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .freeze = pata_macio_freeze,
+ .set_piomode = pata_macio_set_timings,
+ .set_dmamode = pata_macio_set_timings,
+ .cable_detect = pata_macio_cable_detect,
+ .sff_dev_select = pata_macio_dev_select,
+ .qc_prep = pata_macio_qc_prep,
+ .mode_filter = ata_bmdma_mode_filter,
+ .bmdma_setup = pata_macio_bmdma_setup,
+ .bmdma_start = pata_macio_bmdma_start,
+ .bmdma_stop = pata_macio_bmdma_stop,
+ .bmdma_status = pata_macio_bmdma_status,
+ .port_start = pata_macio_port_start,
+ .sff_irq_clear = pata_macio_irq_clear,
+};
+
+static void __devinit pata_macio_invariants(struct pata_macio_priv *priv)
+{
+ const int *bidp;
+
+ /* Identify the type of controller */
+ if (of_device_is_compatible(priv->node, "shasta-ata")) {
+ priv->kind = controller_sh_ata6;
+ priv->timings = pata_macio_shasta_timings;
+ } else if (of_device_is_compatible(priv->node, "kauai-ata")) {
+ priv->kind = controller_un_ata6;
+ priv->timings = pata_macio_kauai_timings;
+ } else if (of_device_is_compatible(priv->node, "K2-UATA")) {
+ priv->kind = controller_k2_ata6;
+ priv->timings = pata_macio_kauai_timings;
+ } else if (of_device_is_compatible(priv->node, "keylargo-ata")) {
+ if (strcmp(priv->node->name, "ata-4") == 0) {
+ priv->kind = controller_kl_ata4;
+ priv->timings = pata_macio_kl66_timings;
+ } else {
+ priv->kind = controller_kl_ata3;
+ priv->timings = pata_macio_kl33_timings;
+ }
+ } else if (of_device_is_compatible(priv->node, "heathrow-ata")) {
+ priv->kind = controller_heathrow;
+ priv->timings = pata_macio_heathrow_timings;
+ } else {
+ priv->kind = controller_ohare;
+ priv->timings = pata_macio_ohare_timings;
+ }
+
+ /* XXX FIXME --- setup priv->mediabay here */
+
+ /* Get Apple bus ID (for clock and ASIC control) */
+ bidp = of_get_property(priv->node, "AAPL,bus-id", NULL);
+ priv->aapl_bus_id = bidp ? *bidp : 0;
+
+ /* Fixup missing Apple bus ID in case of media-bay */
+ if (priv->mediabay && bidp == 0)
+ priv->aapl_bus_id = 1;
+}
+
+static void __devinit pata_macio_setup_ios(struct ata_ioports *ioaddr,
+ void __iomem * base,
+ void __iomem * dma)
+{
+ /* cmd_addr is the base of regs for that port */
+ ioaddr->cmd_addr = base;
+
+ /* taskfile registers */
+ ioaddr->data_addr = base + (ATA_REG_DATA << 4);
+ ioaddr->error_addr = base + (ATA_REG_ERR << 4);
+ ioaddr->feature_addr = base + (ATA_REG_FEATURE << 4);
+ ioaddr->nsect_addr = base + (ATA_REG_NSECT << 4);
+ ioaddr->lbal_addr = base + (ATA_REG_LBAL << 4);
+ ioaddr->lbam_addr = base + (ATA_REG_LBAM << 4);
+ ioaddr->lbah_addr = base + (ATA_REG_LBAH << 4);
+ ioaddr->device_addr = base + (ATA_REG_DEVICE << 4);
+ ioaddr->status_addr = base + (ATA_REG_STATUS << 4);
+ ioaddr->command_addr = base + (ATA_REG_CMD << 4);
+ ioaddr->altstatus_addr = base + 0x160;
+ ioaddr->ctl_addr = base + 0x160;
+ ioaddr->bmdma_addr = dma;
+}
+
+static void __devinit pmac_macio_calc_timing_masks(struct pata_macio_priv *priv,
+ struct ata_port_info *pinfo)
+{
+ int i = 0;
+
+ pinfo->pio_mask = 0;
+ pinfo->mwdma_mask = 0;
+ pinfo->udma_mask = 0;
+
+ while (priv->timings[i].mode > 0) {
+ unsigned int mask = 1U << (priv->timings[i].mode & 0x0f);
+ switch(priv->timings[i].mode & 0xf0) {
+ case 0x00: /* PIO */
+ pinfo->pio_mask |= (mask >> 8);
+ break;
+ case 0x20: /* MWDMA */
+ pinfo->mwdma_mask |= mask;
+ break;
+ case 0x40: /* UDMA */
+ pinfo->udma_mask |= mask;
+ break;
+ }
+ i++;
+ }
+ dev_dbg(priv->dev, "Supported masks: PIO=%lx, MWDMA=%lx, UDMA=%lx\n",
+ pinfo->pio_mask, pinfo->mwdma_mask, pinfo->udma_mask);
+}
+
+static int __devinit pata_macio_common_init(struct pata_macio_priv *priv,
+ resource_size_t tfregs,
+ resource_size_t dmaregs,
+ resource_size_t fcregs,
+ unsigned long irq)
+{
+ struct ata_port_info pinfo;
+ const struct ata_port_info *ppi[] = { &pinfo, NULL };
+ void __iomem *dma_regs = NULL;
+
+ /* Fill up privates with various invariants collected from the
+ * device-tree
+ */
+ pata_macio_invariants(priv);
+
+ /* Make sure we have sane initial timings in the cache */
+ pata_macio_default_timings(priv);
+
+ /* Not sure what the real max is but we know it's less than 64K, let's
+ * use 64K minus 256
+ */
+ dma_set_max_seg_size(priv->dev, MAX_DBDMA_SEG);
+
+ /* Allocate libata host for 1 port */
+ memset(&pinfo, 0, sizeof(struct ata_port_info));
+ pmac_macio_calc_timing_masks(priv, &pinfo);
+ pinfo.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO |
+ ATA_FLAG_NO_LEGACY;
+ pinfo.port_ops = &pata_macio_ops;
+ pinfo.private_data = priv;
+
+ priv->host = ata_host_alloc_pinfo(priv->dev, ppi, 1);
+ if (priv->host == NULL) {
+ dev_err(priv->dev, "Failed to allocate ATA port structure\n");
+ return -ENOMEM;
+ }
+
+ /* Setup the private data in host too */
+ priv->host->private_data = priv;
+
+ /* Map base registers */
+ priv->tfregs = devm_ioremap(priv->dev, tfregs, 0x100);
+ if (priv->tfregs == NULL) {
+ dev_err(priv->dev, "Failed to map ATA ports\n");
+ return -ENOMEM;
+ }
+ priv->host->iomap = &priv->tfregs;
+
+ /* Map DMA regs */
+ if (dmaregs != 0) {
+ dma_regs = devm_ioremap(priv->dev, dmaregs,
+ sizeof(struct dbdma_regs));
+ if (dma_regs == NULL)
+ dev_warn(priv->dev, "Failed to map ATA DMA registers\n");
+ }
+
+ /* If chip has local feature control, map those regs too */
+ if (fcregs != 0) {
+ priv->kauai_fcr = devm_ioremap(priv->dev, fcregs, 4);
+ if (priv->kauai_fcr == NULL) {
+ dev_err(priv->dev, "Failed to map ATA FCR register\n");
+ return -ENOMEM;
+ }
+ }
+
+ /* Setup port data structure */
+ pata_macio_setup_ios(&priv->host->ports[0]->ioaddr,
+ priv->tfregs, dma_regs);
+ priv->host->ports[0]->private_data = priv;
+
+ /* hard-reset the controller */
+ pata_macio_reset_hw(priv, 0);
+ pata_macio_apply_timings(priv->host->ports[0], 0);
+
+ /* Enable bus master if necessary */
+ if (priv->pdev && dma_regs)
+ pci_set_master(priv->pdev);
+
+ dev_info(priv->dev, "Activating pata-macio chipset %s, Apple bus ID %d\n",
+ macio_ata_names[priv->kind], priv->aapl_bus_id);
+
+ /* Start it up */
+ priv->irq = irq;
+ return ata_host_activate(priv->host, irq, ata_sff_interrupt, 0,
+ &pata_macio_sht);
+}
+
+static int __devinit pata_macio_attach(struct macio_dev *mdev,
+ const struct of_device_id *match)
+{
+ struct pata_macio_priv *priv;
+ resource_size_t tfregs, dmaregs = 0;
+ unsigned long irq;
+ int rc;
+
+ /* Check for broken device-trees */
+ if (macio_resource_count(mdev) == 0) {
+ dev_err(&mdev->ofdev.dev,
+ "No addresses for controller\n");
+ return -ENXIO;
+ }
+
+ /* Enable managed resources */
+ macio_enable_devres(mdev);
+
+ /* Allocate and init private data structure */
+ priv = devm_kzalloc(&mdev->ofdev.dev,
+ sizeof(struct pata_macio_priv), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&mdev->ofdev.dev,
+ "Failed to allocate private memory\n");
+ return -ENOMEM;
+ }
+ priv->node = of_node_get(mdev->ofdev.node);
+ priv->mdev = mdev;
+ priv->dev = &mdev->ofdev.dev;
+
+ /* Request memory resource for taskfile registers */
+ if (macio_request_resource(mdev, 0, "pata-macio")) {
+ dev_err(&mdev->ofdev.dev,
+ "Cannot obtain taskfile resource\n");
+ return -EBUSY;
+ }
+ tfregs = macio_resource_start(mdev, 0);
+
+ /* Request resources for DMA registers if any */
+ if (macio_resource_count(mdev) >= 2) {
+ if (macio_request_resource(mdev, 1, "pata-macio-dma"))
+ dev_err(&mdev->ofdev.dev,
+ "Cannot obtain DMA resource\n");
+ else
+ dmaregs = macio_resource_start(mdev, 1);
+ }
+
+ /*
+ * Fixup missing IRQ for some old implementations with broken
+ * device-trees.
+ *
+ * This is a bit bogus, it should be fixed in the device-tree itself,
+ * via the existing macio fixups, based on the type of interrupt
+ * controller in the machine. However, I have no test HW for this case,
+ * and this trick works well enough on those old machines...
+ */
+ if (macio_irq_count(mdev) == 0) {
+ dev_warn(&mdev->ofdev.dev,
+ "No interrupts for controller, using 13\n");
+ irq = irq_create_mapping(NULL, 13);
+ } else
+ irq = macio_irq(mdev, 0);
+
+ /* Prevvent media bay callbacks until fully registered */
+ lock_media_bay(priv->mdev->media_bay);
+
+ /* Get register addresses and call common initialization */
+ rc = pata_macio_common_init(priv,
+ tfregs, /* Taskfile regs */
+ dmaregs, /* DBDMA regs */
+ 0, /* Feature control */
+ irq);
+ unlock_media_bay(priv->mdev->media_bay);
+
+ return rc;
+}
+
+static int __devexit pata_macio_detach(struct macio_dev *mdev)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+ struct pata_macio_priv *priv = host->private_data;
+
+ lock_media_bay(priv->mdev->media_bay);
+
+ /* Make sure the mediabay callback doesn't try to access
+ * dead stuff
+ */
+ priv->host->private_data = NULL;
+
+ ata_host_detach(host);
+
+ unlock_media_bay(priv->mdev->media_bay);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+
+ return pata_macio_do_suspend(host->private_data, mesg);
+}
+
+static int pata_macio_resume(struct macio_dev *mdev)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+
+ return pata_macio_do_resume(host->private_data);
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PMAC_MEDIABAY
+static void pata_macio_mb_event(struct macio_dev* mdev, int mb_state)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+ struct ata_port *ap;
+ struct ata_eh_info *ehi;
+ struct ata_device *dev;
+ unsigned long flags;
+
+ if (!host || !host->private_data)
+ return;
+ ap = host->ports[0];
+ spin_lock_irqsave(ap->lock, flags);
+ ehi = &ap->link.eh_info;
+ if (mb_state == MB_CD) {
+ ata_ehi_push_desc(ehi, "mediabay plug");
+ ata_ehi_hotplugged(ehi);
+ ata_port_freeze(ap);
+ } else {
+ ata_ehi_push_desc(ehi, "mediabay unplug");
+ ata_for_each_dev(dev, &ap->link, ALL)
+ dev->flags |= ATA_DFLAG_DETACH;
+ ata_port_abort(ap);
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+
+}
+#endif /* CONFIG_PMAC_MEDIABAY */
+
+
+static int __devinit pata_macio_pci_attach(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct pata_macio_priv *priv;
+ struct device_node *np;
+ resource_size_t rbase;
+
+ /* We cannot use a MacIO controller without its OF device node */
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL) {
+ dev_err(&pdev->dev,
+ "Cannot find OF device node for controller\n");
+ return -ENODEV;
+ }
+
+ /* Check that it can be enabled */
+ if (pcim_enable_device(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot enable controller PCI device\n");
+ return -ENXIO;
+ }
+
+ /* Allocate and init private data structure */
+ priv = devm_kzalloc(&pdev->dev,
+ sizeof(struct pata_macio_priv), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&pdev->dev,
+ "Failed to allocate private memory\n");
+ return -ENOMEM;
+ }
+ priv->node = of_node_get(np);
+ priv->pdev = pdev;
+ priv->dev = &pdev->dev;
+
+ /* Get MMIO regions */
+ if (pci_request_regions(pdev, "pata-macio")) {
+ dev_err(&pdev->dev,
+ "Cannot obtain PCI resources\n");
+ return -EBUSY;
+ }
+
+ /* Get register addresses and call common initialization */
+ rbase = pci_resource_start(pdev, 0);
+ if (pata_macio_common_init(priv,
+ rbase + 0x2000, /* Taskfile regs */
+ rbase + 0x1000, /* DBDMA regs */
+ rbase, /* Feature control */
+ pdev->irq))
+ return -ENXIO;
+
+ return 0;
+}
+
+static void __devexit pata_macio_pci_detach(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ ata_host_detach(host);
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ return pata_macio_do_suspend(host->private_data, mesg);
+}
+
+static int pata_macio_pci_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ return pata_macio_do_resume(host->private_data);
+}
+
+#endif /* CONFIG_PM */
+
+static struct of_device_id pata_macio_match[] =
+{
+ {
+ .name = "IDE",
+ },
+ {
+ .name = "ATA",
+ },
+ {
+ .type = "ide",
+ },
+ {
+ .type = "ata",
+ },
+ {},
+};
+
+static struct macio_driver pata_macio_driver =
+{
+ .name = "pata-macio",
+ .match_table = pata_macio_match,
+ .probe = pata_macio_attach,
+ .remove = pata_macio_detach,
+#ifdef CONFIG_PM
+ .suspend = pata_macio_suspend,
+ .resume = pata_macio_resume,
+#endif
+#ifdef CONFIG_PMAC_MEDIABAY
+ .mediabay_event = pata_macio_mb_event,
+#endif
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+static const struct pci_device_id pata_macio_pci_match[] = {
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 },
+ {},
+};
+
+static struct pci_driver pata_macio_pci_driver = {
+ .name = "pata-pci-macio",
+ .id_table = pata_macio_pci_match,
+ .probe = pata_macio_pci_attach,
+ .remove = pata_macio_pci_detach,
+#ifdef CONFIG_PM
+ .suspend = pata_macio_pci_suspend,
+ .resume = pata_macio_pci_resume,
+#endif
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+MODULE_DEVICE_TABLE(pci, pata_macio_pci_match);
+
+
+static int __init pata_macio_init(void)
+{
+ int rc;
+
+ if (!machine_is(powermac))
+ return -ENODEV;
+
+ rc = pci_register_driver(&pata_macio_pci_driver);
+ if (rc)
+ return rc;
+ rc = macio_register_driver(&pata_macio_driver);
+ if (rc) {
+ pci_unregister_driver(&pata_macio_pci_driver);
+ return rc;
+ }
+ return 0;
+}
+
+static void __exit pata_macio_exit(void)
+{
+ macio_unregister_driver(&pata_macio_driver);
+ pci_unregister_driver(&pata_macio_pci_driver);
+}
+
+module_init(pata_macio_init);
+module_exit(pata_macio_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt");
+MODULE_DESCRIPTION("Apple MacIO PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
struct cpu *cpu = container_of(dev, struct cpu, sysdev);
ssize_t ret;
+ cpu_hotplug_driver_lock();
switch (buf[0]) {
case '0':
ret = cpu_down(cpu->sysdev.id);
default:
ret = -EINVAL;
}
+ cpu_hotplug_driver_unlock();
if (ret >= 0)
ret = count;
per_cpu(cpu_sys_devices, logical_cpu) = NULL;
return;
}
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+static ssize_t cpu_probe_store(struct class *class, const char *buf,
+ size_t count)
+{
+ return arch_cpu_probe(buf, count);
+}
+
+static ssize_t cpu_release_store(struct class *class, const char *buf,
+ size_t count)
+{
+ return arch_cpu_release(buf, count);
+}
+
+static CLASS_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
+static CLASS_ATTR(release, S_IWUSR, NULL, cpu_release_store);
+
+int __init cpu_probe_release_init(void)
+{
+ int rc;
+
+ rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+ &class_attr_probe.attr);
+ if (!rc)
+ rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+ &class_attr_release.attr);
+
+ return rc;
+}
+device_initcall(cpu_probe_release_init);
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
#else /* ... !CONFIG_HOTPLUG_CPU */
static inline void register_cpu_control(struct cpu *cpu)
{
int ejected;
wait_queue_head_t wait;
int wanted;
- struct device_node* media_bay; /* NULL when not in bay */
+ struct macio_dev *mdev;
char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)];
};
static void do_fd_request(struct request_queue * q)
{
int i;
- for(i=0;i<floppy_count;i++)
- {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (floppy_states[i].media_bay &&
- check_media_bay(floppy_states[i].media_bay, MB_FD))
+
+ for(i=0; i<floppy_count; i++) {
+ struct floppy_state *fs = &floppy_states[i];
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
continue;
-#endif /* CONFIG_PMAC_MEDIABAY */
- start_request(&floppy_states[i]);
+ start_request(fs);
}
}
if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))
return -EPERM;
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
switch (cmd) {
case FDEJECT:
int n, err = 0;
if (fs->ref_count == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
out_8(&sw->setup, S_IBM_DRIVE | S_FCLK_DIV2);
out_8(&sw->control_bic, 0xff);
out_8(&sw->mode, 0x95);
struct swim3 __iomem *sw;
int ret, n;
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
sw = fs->swim3;
grab_drive(fs, revalidating, 0);
static int swim3_add_device(struct macio_dev *mdev, int index)
{
struct device_node *swim = mdev->ofdev.node;
- struct device_node *mediabay;
struct floppy_state *fs = &floppy_states[index];
int rc = -EBUSY;
}
dev_set_drvdata(&mdev->ofdev.dev, fs);
- mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
- swim->parent : NULL;
- if (mediabay == NULL)
+ if (mdev->media_bay == NULL)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
memset(fs, 0, sizeof(*fs));
fs->secpercyl = 36;
fs->secpertrack = 18;
fs->total_secs = 2880;
- fs->media_bay = mediabay;
+ fs->mdev = mdev;
init_waitqueue_head(&fs->wait);
fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space);
init_timer(&fs->timeout);
printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
- mediabay ? "in media bay" : "");
+ mdev->media_bay ? "in media bay" : "");
return 0;
return 0;
}
-static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start,
- int type)
+static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
{
- int i, j, num_entries;
+ int i, num_entries;
void *temp;
+ u32 *gp;
int mask_type;
- temp = agp_bridge->current_size;
- num_entries = A_SIZE_32(temp)->num_entries;
-
if (type != mem->type)
return -EINVAL;
return -EINVAL;
}
- if ((pg_start + mem->page_count) > num_entries)
- return -EINVAL;
-
- j = pg_start;
-
- while (j < (pg_start + mem->page_count)) {
- if (agp_bridge->gatt_table[j])
- return -EBUSY;
- j++;
- }
-
- for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
- agp_bridge->gatt_table[j] =
- cpu_to_le32((page_to_phys(mem->pages[i]) & 0xFFFFF000UL) | 0x1UL);
- flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])),
- (unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000);
- }
- (void)in_le32((volatile u32*)&agp_bridge->gatt_table[pg_start]);
- mb();
-
- uninorth_tlbflush(mem);
- return 0;
-}
-
-static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
-{
- int i, num_entries;
- void *temp;
- u32 *gp;
- int mask_type;
+ if (mem->page_count == 0)
+ return 0;
temp = agp_bridge->current_size;
num_entries = A_SIZE_32(temp)->num_entries;
- if (type != mem->type)
- return -EINVAL;
-
- mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type);
- if (mask_type != 0) {
- /* We know nothing of memory types */
- return -EINVAL;
- }
-
if ((pg_start + mem->page_count) > num_entries)
return -EINVAL;
for (i = 0; i < mem->page_count; ++i) {
if (gp[i]) {
dev_info(&agp_bridge->dev->dev,
- "u3_insert_memory: entry 0x%x occupied (%x)\n",
+ "uninorth_insert_memory: entry 0x%x occupied (%x)\n",
i, gp[i]);
return -EBUSY;
}
}
for (i = 0; i < mem->page_count; i++) {
- gp[i] = (page_to_phys(mem->pages[i]) >> PAGE_SHIFT) | 0x80000000UL;
+ if (is_u3)
+ gp[i] = (page_to_phys(mem->pages[i]) >> PAGE_SHIFT) | 0x80000000UL;
+ else
+ gp[i] = cpu_to_le32((page_to_phys(mem->pages[i]) & 0xFFFFF000UL) |
+ 0x1UL);
flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])),
(unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000);
}
return 0;
}
-int u3_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
+int uninorth_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
{
size_t i;
u32 *gp;
+ int mask_type;
+
+ if (type != mem->type)
+ return -EINVAL;
- if (type != 0 || mem->type != 0)
+ mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type);
+ if (mask_type != 0) {
/* We know nothing of memory types */
return -EINVAL;
+ }
+
+ if (mem->page_count == 0)
+ return 0;
gp = (u32 *) &agp_bridge->gatt_table[pg_start];
for (i = 0; i < mem->page_count; ++i)
.create_gatt_table = uninorth_create_gatt_table,
.free_gatt_table = uninorth_free_gatt_table,
.insert_memory = uninorth_insert_memory,
- .remove_memory = agp_generic_remove_memory,
+ .remove_memory = uninorth_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_enable = uninorth_agp_enable,
.create_gatt_table = uninorth_create_gatt_table,
.free_gatt_table = uninorth_free_gatt_table,
- .insert_memory = u3_insert_memory,
- .remove_memory = u3_remove_memory,
+ .insert_memory = uninorth_insert_memory,
+ .remove_memory = uninorth_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
tty_hangup(tty);
return 0;
}
+EXPORT_SYMBOL_GPL(hvc_remove);
/* Driver initialization: called as soon as someone uses hvc_alloc(). */
static int hvc_init(void)
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/irq.h>
-
-#ifndef CONFIG_PPC64
#include <asm/mediabay.h>
-#endif
#define DRV_NAME "ide-pmac"
int irq;
int kind;
int aapl_bus_id;
- unsigned mediabay : 1;
unsigned broken_dma : 1;
unsigned broken_dma_warn : 1;
struct device_node* node;
struct macio_dev *mdev;
u32 timings[4];
volatile u32 __iomem * *kauai_fcr;
+ ide_hwif_t *hwif;
+
/* Those fields are duplicating what is in hwif. We currently
* can't use the hwif ones because of some assumptions that are
* beeing done by the generic code about the kind of dma controller
pmif->timings[2] = pmif->timings[3] = value2;
}
+static int on_media_bay(pmac_ide_hwif_t *pmif)
+{
+ return pmif->mdev && pmif->mdev->media_bay != NULL;
+}
+
/* Suspend call back, should be called after the child devices
* have actually been suspended
*/
disable_irq(pmif->irq);
/* The media bay will handle itself just fine */
- if (pmif->mediabay)
+ if (on_media_bay(pmif))
return 0;
/* Kauai has bus control FCRs directly here */
static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
{
/* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
- if (!pmif->mediabay) {
+ if (!on_media_bay(pmif)) {
ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1);
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1);
msleep(10);
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) {
+ if (on_media_bay(pmif)) {
+ if (check_media_bay(pmif->mdev->media_bay) == MB_CD) {
drive->dev_flags &= ~IDE_DFLAG_NOPROBE;
return;
}
-#endif
drive->dev_flags |= IDE_DFLAG_NOPROBE;
}
}
writel(KAUAI_FCR_UATA_MAGIC |
KAUAI_FCR_UATA_RESET_N |
KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr);
-
- pmif->mediabay = 0;
/* Make sure we have sane timings */
sanitize_timings(pmif);
+ /* If we are on a media bay, wait for it to settle and lock it */
+ if (pmif->mdev)
+ lock_media_bay(pmif->mdev->media_bay);
+
host = ide_host_alloc(&d, hws, 1);
- if (host == NULL)
- return -ENOMEM;
- hwif = host->ports[0];
+ if (host == NULL) {
+ rc = -ENOMEM;
+ goto bail;
+ }
+ hwif = pmif->hwif = host->ports[0];
-#ifndef CONFIG_PPC64
- /* XXX FIXME: Media bay stuff need re-organizing */
- if (np->parent && np->parent->name
- && strcasecmp(np->parent->name, "media-bay") == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
- media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
- hwif);
-#endif /* CONFIG_PMAC_MEDIABAY */
- pmif->mediabay = 1;
+ if (on_media_bay(pmif)) {
+ /* Fixup bus ID for media bay */
if (!bidp)
pmif->aapl_bus_id = 1;
} else if (pmif->kind == controller_ohare) {
* units, I keep the old way
*/
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1);
- } else
-#endif
- {
+ } else {
/* This is necessary to enable IDE when net-booting */
ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1);
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1);
}
printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
- "bus ID %d%s, irq %d\n", model_name[pmif->kind],
- pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
- pmif->mediabay ? " (mediabay)" : "", hw->irq);
+ "bus ID %d%s, irq %d\n", model_name[pmif->kind],
+ pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
+ on_media_bay(pmif) ? " (mediabay)" : "", hw->irq);
rc = ide_host_register(host, &d, hws);
- if (rc) {
- ide_host_free(host);
- return rc;
- }
+ if (rc)
+ pmif->hwif = NULL;
- return 0;
+ if (pmif->mdev)
+ unlock_media_bay(pmif->mdev->media_bay);
+
+ bail:
+ if (rc && host)
+ ide_host_free(host);
+ return rc;
}
static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
return rc;
}
+#ifdef CONFIG_PMAC_MEDIABAY
+static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state)
+{
+ pmac_ide_hwif_t *pmif =
+ (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
+
+ switch(mb_state) {
+ case MB_CD:
+ if (!pmif->hwif->present)
+ ide_port_scan(pmif->hwif);
+ break;
+ default:
+ if (pmif->hwif->present)
+ ide_port_unregister_devices(pmif->hwif);
+ }
+}
+#endif /* CONFIG_PMAC_MEDIABAY */
+
+
static struct of_device_id pmac_ide_macio_match[] =
{
{
.probe = pmac_ide_macio_attach,
.suspend = pmac_ide_macio_suspend,
.resume = pmac_ide_macio_resume,
+#ifdef CONFIG_PMAC_MEDIABAY
+ .mediabay_event = pmac_ide_macio_mb_event,
+#endif
};
static const struct pci_device_id pmac_ide_pci_match[] = {
dev->ofdev.dev.parent = parent;
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
+ dev->ofdev.dev.dma_parms = &dev->dma_parms;
+
+ /* Standard DMA paremeters */
+ dma_set_max_seg_size(&dev->ofdev.dev, 65536);
+ dma_set_seg_boundary(&dev->ofdev.dev, 0xffffffff);
#ifdef CONFIG_PCI
/* Set the DMA ops to the ones from the PCI device, this could be
driver_unregister(&drv->driver);
}
+/* Managed MacIO resources */
+struct macio_devres {
+ u32 res_mask;
+};
+
+static void maciom_release(struct device *gendev, void *res)
+{
+ struct macio_dev *dev = to_macio_device(gendev);
+ struct macio_devres *dr = res;
+ int i, max;
+
+ max = min(dev->n_resources, 32);
+ for (i = 0; i < max; i++) {
+ if (dr->res_mask & (1 << i))
+ macio_release_resource(dev, i);
+ }
+}
+
+int macio_enable_devres(struct macio_dev *dev)
+{
+ struct macio_devres *dr;
+
+ dr = devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL);
+ if (!dr) {
+ dr = devres_alloc(maciom_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+ }
+ return devres_get(&dev->ofdev.dev, dr, NULL, NULL) != NULL;
+}
+
+static struct macio_devres * find_macio_dr(struct macio_dev *dev)
+{
+ return devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL);
+}
+
/**
* macio_request_resource - Request an MMIO resource
* @dev: pointer to the device holding the resource
int macio_request_resource(struct macio_dev *dev, int resource_no,
const char *name)
{
+ struct macio_devres *dr = find_macio_dr(dev);
+
if (macio_resource_len(dev, resource_no) == 0)
return 0;
macio_resource_len(dev, resource_no),
name))
goto err_out;
+
+ if (dr && resource_no < 32)
+ dr->res_mask |= 1 << resource_no;
return 0;
*/
void macio_release_resource(struct macio_dev *dev, int resource_no)
{
+ struct macio_devres *dr = find_macio_dr(dev);
+
if (macio_resource_len(dev, resource_no) == 0)
return;
release_mem_region(macio_resource_start(dev, resource_no),
macio_resource_len(dev, resource_no));
+ if (dr && resource_no < 32)
+ dr->res_mask &= ~(1 << resource_no);
}
/**
EXPORT_SYMBOL(macio_release_resource);
EXPORT_SYMBOL(macio_request_resources);
EXPORT_SYMBOL(macio_release_resources);
+EXPORT_SYMBOL(macio_enable_devres);
+
#include <linux/adb.h>
#include <linux/pmu.h>
-
-#define MB_DEBUG
-
-#ifdef MB_DEBUG
-#define MBDBG(fmt, arg...) printk(KERN_INFO fmt , ## arg)
-#else
-#define MBDBG(fmt, arg...) do { } while (0)
-#endif
-
#define MB_FCR32(bay, r) ((bay)->base + ((r) >> 2))
#define MB_FCR8(bay, r) (((volatile u8 __iomem *)((bay)->base)) + (r))
int index;
int cached_gpio;
int sleeping;
+ int user_lock;
struct mutex lock;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ide_hwif_t *cd_port;
- void __iomem *cd_base;
- int cd_irq;
- int cd_retry;
-#endif
-#if defined(CONFIG_BLK_DEV_IDE_PMAC)
- int cd_index;
-#endif
};
#define MAX_BAYS 2
static struct media_bay_info media_bays[MAX_BAYS];
-int media_bay_count = 0;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-/* check the busy bit in the media-bay ide interface
- (assumes the media-bay contains an ide device) */
-#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
-#endif
+static int media_bay_count = 0;
/*
* Wait that number of ms between each step in normal polling mode
/*
* Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted
- * (or until the device is ready) before waiting for busy bit to disappear
+ * (or until the device is ready) before calling into the driver
*/
#define MB_IDE_WAIT 1000
-/*
- * Timeout waiting for busy bit of an IDE device to go down
- */
-#define MB_IDE_TIMEOUT 5000
-
-/*
- * Max retries of the full power up/down sequence for an IDE device
- */
-#define MAX_CD_RETRIES 3
-
/*
* States of a media bay
*/
mb_enabling_bay, /* enable bits set, waiting MB_RESET_DELAY */
mb_resetting, /* reset bit unset, waiting MB_SETUP_DELAY */
mb_ide_resetting, /* IDE reset bit unser, waiting MB_IDE_WAIT */
- mb_ide_waiting, /* Waiting for BUSY bit to go away until MB_IDE_TIMEOUT */
mb_up, /* Media bay full */
mb_powering_down /* Powering down (avoid too fast down/up) */
};
if (onoff) {
bay->ops->power(bay, 1);
bay->state = mb_powering_up;
- MBDBG("mediabay%d: powering up\n", bay->index);
+ pr_debug("mediabay%d: powering up\n", bay->index);
} else {
/* Make sure everything is powered down & disabled */
bay->ops->power(bay, 0);
bay->state = mb_powering_down;
- MBDBG("mediabay%d: powering down\n", bay->index);
+ pr_debug("mediabay%d: powering down\n", bay->index);
}
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
}
{
int id = bay->ops->content(bay);
- if (id == bay->last_value) {
- if (id != bay->content_id) {
- bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
- if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
- /* If the device type changes without going thru
- * "MB_NO", we force a pass by "MB_NO" to make sure
- * things are properly reset
- */
- if ((id != MB_NO) && (bay->content_id != MB_NO)) {
- id = MB_NO;
- MBDBG("mediabay%d: forcing MB_NO\n", bay->index);
- }
- MBDBG("mediabay%d: switching to %d\n", bay->index, id);
- set_mb_power(bay, id != MB_NO);
- bay->content_id = id;
- if (id == MB_NO) {
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- bay->cd_retry = 0;
-#endif
- printk(KERN_INFO "media bay %d is empty\n", bay->index);
- }
- }
- }
- } else {
+ static char *mb_content_types[] = {
+ "a floppy drive",
+ "a floppy drive",
+ "an unsuported audio device",
+ "an ATA device",
+ "an unsupported PCI device",
+ "an unknown device",
+ };
+
+ if (id != bay->last_value) {
bay->last_value = id;
bay->value_count = 0;
+ return;
+ }
+ if (id == bay->content_id)
+ return;
+
+ bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
+ if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
+ /* If the device type changes without going thru
+ * "MB_NO", we force a pass by "MB_NO" to make sure
+ * things are properly reset
+ */
+ if ((id != MB_NO) && (bay->content_id != MB_NO)) {
+ id = MB_NO;
+ pr_debug("mediabay%d: forcing MB_NO\n", bay->index);
+ }
+ pr_debug("mediabay%d: switching to %d\n", bay->index, id);
+ set_mb_power(bay, id != MB_NO);
+ bay->content_id = id;
+ if (id >= MB_NO || id < 0)
+ printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index);
+ else
+ printk(KERN_INFO "mediabay%d: Bay contains %s\n",
+ bay->index, mb_content_types[id]);
}
}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-int check_media_bay(struct device_node *which_bay, int what)
+int check_media_bay(struct macio_dev *baydev)
{
- int i;
+ struct media_bay_info* bay;
+ int id;
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && which_bay == media_bays[i].mdev->ofdev.node) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
- return -ENODEV;
+ if (baydev == NULL)
+ return MB_NO;
+
+ /* This returns an instant snapshot, not locking, sine
+ * we may be called with the bay lock held. The resulting
+ * fuzzyness of the result if called at the wrong time is
+ * not actually a huge deal
+ */
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return MB_NO;
+ id = bay->content_id;
+ if (bay->state != mb_up)
+ return MB_NO;
+ if (id == MB_FD1)
+ return MB_FD;
+ return id;
}
-EXPORT_SYMBOL(check_media_bay);
+EXPORT_SYMBOL_GPL(check_media_bay);
-int check_media_bay_by_base(unsigned long base, int what)
+void lock_media_bay(struct macio_dev *baydev)
{
- int i;
-
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && base == (unsigned long) media_bays[i].cd_base) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
+ struct media_bay_info* bay;
- return -ENODEV;
+ if (baydev == NULL)
+ return;
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return;
+ mutex_lock(&bay->lock);
+ bay->user_lock = 1;
}
-EXPORT_SYMBOL_GPL(check_media_bay_by_base);
+EXPORT_SYMBOL_GPL(lock_media_bay);
-int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
- int irq, ide_hwif_t *hwif)
+void unlock_media_bay(struct macio_dev *baydev)
{
- int i;
+ struct media_bay_info* bay;
- for (i=0; i<media_bay_count; i++) {
- struct media_bay_info* bay = &media_bays[i];
-
- if (bay->mdev && which_bay == bay->mdev->ofdev.node) {
- int timeout = 5000, index = hwif->index;
-
- mutex_lock(&bay->lock);
-
- bay->cd_port = hwif;
- bay->cd_base = (void __iomem *) base;
- bay->cd_irq = irq;
-
- if ((MB_CD != bay->content_id) || bay->state != mb_up) {
- mutex_unlock(&bay->lock);
- return 0;
- }
- printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i);
- do {
- if (MB_IDE_READY(i)) {
- bay->cd_index = index;
- mutex_unlock(&bay->lock);
- return 0;
- }
- mdelay(1);
- } while(--timeout);
- printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i);
- mutex_unlock(&bay->lock);
- return -ENODEV;
- }
+ if (baydev == NULL)
+ return;
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return;
+ if (bay->user_lock) {
+ bay->user_lock = 0;
+ mutex_unlock(&bay->lock);
}
+}
+EXPORT_SYMBOL_GPL(unlock_media_bay);
- return -ENODEV;
+static int mb_broadcast_hotplug(struct device *dev, void *data)
+{
+ struct media_bay_info* bay = data;
+ struct macio_dev *mdev;
+ struct macio_driver *drv;
+ int state;
+
+ if (dev->bus != &macio_bus_type)
+ return 0;
+
+ state = bay->state == mb_up ? bay->content_id : MB_NO;
+ if (state == MB_FD1)
+ state = MB_FD;
+ mdev = to_macio_device(dev);
+ drv = to_macio_driver(dev->driver);
+ if (dev->driver && drv->mediabay_event)
+ drv->mediabay_event(mdev, state);
+ return 0;
}
-EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
{
if (bay->state != mb_powering_down)
poll_media_bay(bay);
- /* If timer expired or polling IDE busy, run state machine */
- if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) {
+ /* If timer expired run state machine */
+ if (bay->timer != 0) {
bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
if (bay->timer > 0)
return;
switch(bay->state) {
case mb_powering_up:
if (bay->ops->setup_bus(bay, bay->last_value) < 0) {
- MBDBG("mediabay%d: device not supported (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: device not supported (kind:%d)\n",
+ i, bay->content_id);
set_mb_power(bay, 0);
break;
}
bay->timer = msecs_to_jiffies(MB_RESET_DELAY);
bay->state = mb_enabling_bay;
- MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
break;
case mb_enabling_bay:
bay->ops->un_reset(bay);
bay->timer = msecs_to_jiffies(MB_SETUP_DELAY);
bay->state = mb_resetting;
- MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: releasing bay reset (kind:%d)\n",
+ i, bay->content_id);
break;
case mb_resetting:
if (bay->content_id != MB_CD) {
- MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: bay is up (kind:%d)\n", i,
+ bay->content_id);
bay->state = mb_up;
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
break;
}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: releasing ATA reset (kind:%d)\n",
+ i, bay->content_id);
bay->ops->un_reset_ide(bay);
bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
bay->state = mb_ide_resetting;
-#else
- printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);
- set_mb_power(bay, 0);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
break;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
+
case mb_ide_resetting:
- bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
- bay->state = mb_ide_waiting;
- MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+ bay->state = mb_up;
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
break;
- case mb_ide_waiting:
- if (bay->cd_base == NULL) {
- bay->timer = 0;
- bay->state = mb_up;
- MBDBG("mediabay%d: up before IDE init\n", i);
- break;
- } else if (MB_IDE_READY(i)) {
- bay->timer = 0;
- bay->state = mb_up;
- if (bay->cd_index < 0) {
- printk("mediabay %d, registering IDE...\n", i);
- pmu_suspend();
- ide_port_scan(bay->cd_port);
- if (bay->cd_port->present)
- bay->cd_index = bay->cd_port->index;
- pmu_resume();
- }
- if (bay->cd_index == -1) {
- /* We eventually do a retry */
- bay->cd_retry++;
- printk("IDE register error\n");
- set_mb_power(bay, 0);
- } else {
- printk(KERN_DEBUG "media-bay %d is ide%d\n", i, bay->cd_index);
- MBDBG("mediabay %d IDE ready\n", i);
- }
- break;
- } else if (bay->timer > 0)
- bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
- if (bay->timer <= 0) {
- printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n",
- i, readb(bay->cd_base + 0x70));
- MBDBG("mediabay%d: nIDE Timeout !\n", i);
- set_mb_power(bay, 0);
- bay->timer = 0;
- }
- break;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+
case mb_powering_down:
bay->state = mb_empty;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- if (bay->cd_index >= 0) {
- printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
- bay->cd_index);
- ide_port_unregister_devices(bay->cd_port);
- bay->cd_index = -1;
- }
- if (bay->cd_retry) {
- if (bay->cd_retry > MAX_CD_RETRIES) {
- /* Should add an error sound (sort of beep in dmasound) */
- printk("\nmedia-bay %d, IDE device badly inserted or unrecognised\n", i);
- } else {
- /* Force a new power down/up sequence */
- bay->content_id = MB_NO;
- }
- }
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
- MBDBG("mediabay%d: end of power down\n", i);
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
+ pr_debug("mediabay%d: end of power down\n", i);
break;
}
}
bay->last_value = bay->ops->content(bay);
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->state = mb_empty;
- do {
- msleep(MB_POLL_DELAY);
- media_bay_step(i);
- } while((bay->state != mb_empty) &&
- (bay->state != mb_up));
/* Mark us ready by filling our mdev data */
macio_set_drvdata(mdev, bay);
set_mb_power(bay, 0);
msleep(MB_POWER_DELAY);
if (bay->ops->content(bay) != bay->content_id) {
- printk("mediabay%d: content changed during sleep...\n", bay->index);
+ printk("mediabay%d: Content changed during sleep...\n", bay->index);
mutex_unlock(&bay->lock);
return 0;
}
bay->last_value = bay->content_id;
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- bay->cd_retry = 0;
-#endif
do {
msleep(MB_POLL_DELAY);
media_bay_step(bay->index);
for (i=0; i<MAX_BAYS; i++) {
memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info));
media_bays[i].content_id = -1;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- media_bays[i].cd_index = -1;
-#endif
}
if (!machine_is(powermac))
return 0;
#include <linux/fcntl.h>
#include <linux/nvram.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/nvram.h>
static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
{
- lock_kernel();
switch (origin) {
case 1:
offset += file->f_pos;
offset += NVRAM_SIZE;
break;
}
- if (offset < 0) {
- unlock_kernel();
+ if (offset < 0)
return -EINVAL;
- }
+
file->f_pos = offset;
- unlock_kernel();
return file->f_pos;
}
return p - buf;
}
-static int nvram_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long nvram_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
switch(cmd) {
case PMAC_NVRAM_GET_OFFSET:
u8 limits[3];
int last_speed[2];
int last_var[2];
+ int pwm_inv[2];
};
static enum {ADT7460, ADT7467} therm_type;
if (speed >= 0) {
manual = read_reg(th, MANUAL_MODE[fan]);
+ manual &= ~INVERT_MASK;
write_reg(th, MANUAL_MODE[fan],
- (manual|MANUAL_MASK) & (~INVERT_MASK));
+ manual | MANUAL_MASK | th->pwm_inv[fan]);
write_reg(th, FAN_SPD_SET[fan], speed);
} else {
/* back to automatic */
if(therm_type == ADT7460) {
manual = read_reg(th,
MANUAL_MODE[fan]) & (~MANUAL_MASK);
-
+ manual &= ~INVERT_MASK;
+ manual |= th->pwm_inv[fan];
write_reg(th,
MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
} else {
manual = read_reg(th, MANUAL_MODE[fan]);
+ manual &= ~INVERT_MASK;
+ manual |= th->pwm_inv[fan];
write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
}
}
i2c_set_clientdata(client, th);
th->clt = client;
- rc = read_reg(th, 0);
+ rc = read_reg(th, CONFIG_REG);
if (rc < 0) {
dev_err(&client->dev, "Thermostat failed to read config!\n");
kfree(th);
thermostat = th;
+ /* record invert bit status because fw can corrupt it after suspend */
+ th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
+ th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
+
/* be sure to really write fan speed the first time */
th->last_speed[0] = -2;
th->last_speed[1] = -2;
#include <linux/spinlock.h>
#include <linux/pm.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
static void pmu_start(void);
static irqreturn_t via_pmu_interrupt(int irq, void *arg);
static irqreturn_t gpio1_interrupt(int irq, void *arg);
-static int proc_get_info(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-static int proc_get_irqstats(char *page, char **start, off_t off,
- int count, int *eof, void *data);
+static const struct file_operations pmu_info_proc_fops;
+static const struct file_operations pmu_irqstats_proc_fops;
static void pmu_pass_intr(unsigned char *data, int len);
-static int proc_get_batt(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-static int proc_read_options(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-static int proc_write_options(struct file *file, const char __user *buffer,
- unsigned long count, void *data);
+static const struct file_operations pmu_battery_proc_fops;
+static const struct file_operations pmu_options_proc_fops;
#ifdef CONFIG_ADB
struct adb_driver via_pmu_driver = {
for (i=0; i<pmu_battery_count; i++) {
char title[16];
sprintf(title, "battery_%ld", i);
- proc_pmu_batt[i] = create_proc_read_entry(title, 0, proc_pmu_root,
- proc_get_batt, (void *)i);
+ proc_pmu_batt[i] = proc_create_data(title, 0, proc_pmu_root,
+ &pmu_battery_proc_fops, (void *)i);
}
- proc_pmu_info = create_proc_read_entry("info", 0, proc_pmu_root,
- proc_get_info, NULL);
- proc_pmu_irqstats = create_proc_read_entry("interrupts", 0, proc_pmu_root,
- proc_get_irqstats, NULL);
- proc_pmu_options = create_proc_entry("options", 0600, proc_pmu_root);
- if (proc_pmu_options) {
- proc_pmu_options->read_proc = proc_read_options;
- proc_pmu_options->write_proc = proc_write_options;
- }
+ proc_pmu_info = proc_create("info", 0, proc_pmu_root, &pmu_info_proc_fops);
+ proc_pmu_irqstats = proc_create("interrupts", 0, proc_pmu_root,
+ &pmu_irqstats_proc_fops);
+ proc_pmu_options = proc_create("options", 0600, proc_pmu_root,
+ &pmu_options_proc_fops);
}
return 0;
}
2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
}
-static int
-proc_get_info(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int pmu_info_proc_show(struct seq_file *m, void *v)
{
- char* p = page;
-
- p += sprintf(p, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
- p += sprintf(p, "PMU firmware version : %02x\n", pmu_version);
- p += sprintf(p, "AC Power : %d\n",
+ seq_printf(m, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
+ seq_printf(m, "PMU firmware version : %02x\n", pmu_version);
+ seq_printf(m, "AC Power : %d\n",
((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
- p += sprintf(p, "Battery count : %d\n", pmu_battery_count);
+ seq_printf(m, "Battery count : %d\n", pmu_battery_count);
+
+ return 0;
+}
- return p - page;
+static int pmu_info_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pmu_info_proc_show, NULL);
}
-static int
-proc_get_irqstats(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static const struct file_operations pmu_info_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pmu_info_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
{
int i;
- char* p = page;
static const char *irq_names[] = {
"Total CB1 triggered events",
"Total GPIO1 triggered events",
};
for (i=0; i<11; i++) {
- p += sprintf(p, " %2u: %10u (%s)\n",
+ seq_printf(m, " %2u: %10u (%s)\n",
i, pmu_irq_stats[i], irq_names[i]);
}
- return p - page;
+ return 0;
}
-static int
-proc_get_batt(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int pmu_irqstats_proc_open(struct inode *inode, struct file *file)
{
- long batnum = (long)data;
- char *p = page;
+ return single_open(file, pmu_irqstats_proc_show, NULL);
+}
+
+static const struct file_operations pmu_irqstats_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pmu_irqstats_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pmu_battery_proc_show(struct seq_file *m, void *v)
+{
+ long batnum = (long)m->private;
- p += sprintf(p, "\n");
- p += sprintf(p, "flags : %08x\n",
- pmu_batteries[batnum].flags);
- p += sprintf(p, "charge : %d\n",
- pmu_batteries[batnum].charge);
- p += sprintf(p, "max_charge : %d\n",
- pmu_batteries[batnum].max_charge);
- p += sprintf(p, "current : %d\n",
- pmu_batteries[batnum].amperage);
- p += sprintf(p, "voltage : %d\n",
- pmu_batteries[batnum].voltage);
- p += sprintf(p, "time rem. : %d\n",
- pmu_batteries[batnum].time_remaining);
-
- return p - page;
+ seq_putc(m, '\n');
+ seq_printf(m, "flags : %08x\n", pmu_batteries[batnum].flags);
+ seq_printf(m, "charge : %d\n", pmu_batteries[batnum].charge);
+ seq_printf(m, "max_charge : %d\n", pmu_batteries[batnum].max_charge);
+ seq_printf(m, "current : %d\n", pmu_batteries[batnum].amperage);
+ seq_printf(m, "voltage : %d\n", pmu_batteries[batnum].voltage);
+ seq_printf(m, "time rem. : %d\n", pmu_batteries[batnum].time_remaining);
+ return 0;
}
-static int
-proc_read_options(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int pmu_battery_proc_open(struct inode *inode, struct file *file)
{
- char *p = page;
+ return single_open(file, pmu_battery_proc_show, PDE(inode)->data);
+}
+static const struct file_operations pmu_battery_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pmu_battery_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pmu_options_proc_show(struct seq_file *m, void *v)
+{
#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
if (pmu_kind == PMU_KEYLARGO_BASED &&
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
- p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
+ seq_printf(m, "lid_wakeup=%d\n", option_lid_wakeup);
#endif
if (pmu_kind == PMU_KEYLARGO_BASED)
- p += sprintf(p, "server_mode=%d\n", option_server_mode);
+ seq_printf(m, "server_mode=%d\n", option_server_mode);
- return p - page;
+ return 0;
}
-
-static int
-proc_write_options(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+
+static int pmu_options_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pmu_options_proc_show, NULL);
+}
+
+static ssize_t pmu_options_proc_write(struct file *file,
+ const char __user *buffer, size_t count, loff_t *pos)
{
char tmp[33];
char *label, *val;
- unsigned long fcount = count;
+ size_t fcount = count;
if (!count)
return -EINVAL;
return fcount;
}
+static const struct file_operations pmu_options_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pmu_options_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = pmu_options_proc_write,
+};
+
#ifdef CONFIG_ADB
/* Send an ADB command */
static int pmu_send_request(struct adb_request *req, int sync)
fct->ctrl.name = "cpu-front-fan-1";
else if (!strcmp(l, "CPU A PUMP"))
fct->ctrl.name = "cpu-pump-0";
+ else if (!strcmp(l, "CPU B PUMP"))
+ fct->ctrl.name = "cpu-pump-1";
else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan") ||
!strcmp(l, "EXPANSION SLOTS INTAKE"))
fct->ctrl.name = "slots-fan";
#include <linux/mmc/core.h>
#include <linux/mmc/host.h>
+MODULE_LICENSE("GPL");
+
enum {
CD_GPIO = 0,
WP_GPIO,
+++ /dev/null
-/*
- * linux/drivers/net/ehea/ehea_hcall.h
- *
- * eHEA ethernet device driver for IBM eServer System p
- *
- * (C) Copyright IBM Corp. 2006
- *
- * Authors:
- * Christoph Raisch <raisch@de.ibm.com>
- * Jan-Bernd Themann <themann@de.ibm.com>
- * Thomas Klein <tklein@de.ibm.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __EHEA_HCALL_H__
-#define __EHEA_HCALL_H__
-
-/**
- * This file contains HCALL defines that are to be included in the appropriate
- * kernel files later
- */
-
-#define H_ALLOC_HEA_RESOURCE 0x278
-#define H_MODIFY_HEA_QP 0x250
-#define H_QUERY_HEA_QP 0x254
-#define H_QUERY_HEA 0x258
-#define H_QUERY_HEA_PORT 0x25C
-#define H_MODIFY_HEA_PORT 0x260
-#define H_REG_BCMC 0x264
-#define H_DEREG_BCMC 0x268
-#define H_REGISTER_HEA_RPAGES 0x26C
-#define H_DISABLE_AND_GET_HEA 0x270
-#define H_GET_HEA_INFO 0x274
-#define H_ADD_CONN 0x284
-#define H_DEL_CONN 0x288
-
-#endif /* __EHEA_HCALL_H__ */
#include <asm/hvcall.h>
#include "ehea.h"
#include "ehea_hw.h"
-#include "ehea_hcall.h"
/* Some abbreviations used here:
*
return 0;
}
-static int of_platform_device_suspend(struct device *dev, pm_message_t state)
+static void of_platform_device_shutdown(struct device *dev)
{
struct of_device *of_dev = to_of_device(dev);
struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
- int error = 0;
- if (dev->driver && drv->suspend)
- error = drv->suspend(of_dev, state);
- return error;
+ if (dev->driver && drv->shutdown)
+ drv->shutdown(of_dev);
}
-static int of_platform_device_resume(struct device * dev)
+#ifdef CONFIG_PM_SLEEP
+
+static int of_platform_legacy_suspend(struct device *dev, pm_message_t mesg)
{
struct of_device *of_dev = to_of_device(dev);
struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
- int error = 0;
+ int ret = 0;
- if (dev->driver && drv->resume)
- error = drv->resume(of_dev);
- return error;
+ if (dev->driver && drv->suspend)
+ ret = drv->suspend(of_dev, mesg);
+ return ret;
}
-static void of_platform_device_shutdown(struct device *dev)
+static int of_platform_legacy_resume(struct device *dev)
{
struct of_device *of_dev = to_of_device(dev);
struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
+ int ret = 0;
- if (dev->driver && drv->shutdown)
- drv->shutdown(of_dev);
+ if (dev->driver && drv->resume)
+ ret = drv->resume(of_dev);
+ return ret;
+}
+
+static int of_platform_pm_prepare(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm && drv->pm->prepare)
+ ret = drv->pm->prepare(dev);
+
+ return ret;
+}
+
+static void of_platform_pm_complete(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->pm && drv->pm->complete)
+ drv->pm->complete(dev);
+}
+
+#ifdef CONFIG_SUSPEND
+
+static int of_platform_pm_suspend(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->suspend)
+ ret = drv->pm->suspend(dev);
+ } else {
+ ret = of_platform_legacy_suspend(dev, PMSG_SUSPEND);
+ }
+
+ return ret;
}
+static int of_platform_pm_suspend_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->suspend_noirq)
+ ret = drv->pm->suspend_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_resume(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->resume)
+ ret = drv->pm->resume(dev);
+ } else {
+ ret = of_platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_resume_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->resume_noirq)
+ ret = drv->pm->resume_noirq(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define of_platform_pm_suspend NULL
+#define of_platform_pm_resume NULL
+#define of_platform_pm_suspend_noirq NULL
+#define of_platform_pm_resume_noirq NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+
+static int of_platform_pm_freeze(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze)
+ ret = drv->pm->freeze(dev);
+ } else {
+ ret = of_platform_legacy_suspend(dev, PMSG_FREEZE);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_freeze_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze_noirq)
+ ret = drv->pm->freeze_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_thaw(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->thaw)
+ ret = drv->pm->thaw(dev);
+ } else {
+ ret = of_platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_thaw_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->thaw_noirq)
+ ret = drv->pm->thaw_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_poweroff(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->poweroff)
+ ret = drv->pm->poweroff(dev);
+ } else {
+ ret = of_platform_legacy_suspend(dev, PMSG_HIBERNATE);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_poweroff_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->poweroff_noirq)
+ ret = drv->pm->poweroff_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_restore(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->restore)
+ ret = drv->pm->restore(dev);
+ } else {
+ ret = of_platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_restore_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->restore_noirq)
+ ret = drv->pm->restore_noirq(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_HIBERNATION */
+
+#define of_platform_pm_freeze NULL
+#define of_platform_pm_thaw NULL
+#define of_platform_pm_poweroff NULL
+#define of_platform_pm_restore NULL
+#define of_platform_pm_freeze_noirq NULL
+#define of_platform_pm_thaw_noirq NULL
+#define of_platform_pm_poweroff_noirq NULL
+#define of_platform_pm_restore_noirq NULL
+
+#endif /* !CONFIG_HIBERNATION */
+
+static struct dev_pm_ops of_platform_dev_pm_ops = {
+ .prepare = of_platform_pm_prepare,
+ .complete = of_platform_pm_complete,
+ .suspend = of_platform_pm_suspend,
+ .resume = of_platform_pm_resume,
+ .freeze = of_platform_pm_freeze,
+ .thaw = of_platform_pm_thaw,
+ .poweroff = of_platform_pm_poweroff,
+ .restore = of_platform_pm_restore,
+ .suspend_noirq = of_platform_pm_suspend_noirq,
+ .resume_noirq = of_platform_pm_resume_noirq,
+ .freeze_noirq = of_platform_pm_freeze_noirq,
+ .thaw_noirq = of_platform_pm_thaw_noirq,
+ .poweroff_noirq = of_platform_pm_poweroff_noirq,
+ .restore_noirq = of_platform_pm_restore_noirq,
+};
+
+#define OF_PLATFORM_PM_OPS_PTR (&of_platform_dev_pm_ops)
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define OF_PLATFORM_PM_OPS_PTR NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
int of_bus_type_init(struct bus_type *bus, const char *name)
{
bus->name = name;
bus->match = of_platform_bus_match;
bus->probe = of_platform_device_probe;
bus->remove = of_platform_device_remove;
- bus->suspend = of_platform_device_suspend;
- bus->resume = of_platform_device_resume;
bus->shutdown = of_platform_device_shutdown;
bus->dev_attrs = of_platform_device_attrs;
+ bus->pm = OF_PLATFORM_PM_OPS_PTR;
return bus_register(bus);
}
which interfaces to an LM70 temperature sensor using
a parallel port.
+config SPI_MPC52xx
+ tristate "Freescale MPC52xx SPI (non-PSC) controller support"
+ depends on PPC_MPC52xx && SPI
+ select SPI_MASTER_OF
+ help
+ This drivers supports the MPC52xx SPI controller in master SPI
+ mode.
+
config SPI_MPC52xx_PSC
tristate "Freescale MPC52xx PSC SPI controller"
depends on PPC_MPC52xx && EXPERIMENTAL
This enables using the Freescale MPC8xxx SPI controllers in master
mode.
- This driver uses a simple set of shift registers for data (opposed
- to the CPM based descriptor model).
-
config SPI_OMAP_UWIRE
tristate "OMAP1 MicroWire"
depends on ARCH_OMAP1
obj-$(CONFIG_SPI_ORION) += orion_spi.o
obj-$(CONFIG_SPI_PL022) += amba-pl022.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
+obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o
obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o
obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
+#include <linux/of_spi.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
#include <linux/io.h>
struct mpc52xx_psc __iomem *psc = mps->psc;
struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo;
u32 mclken_div;
- int ret = 0;
+ int ret;
/* default sysclk is 512MHz */
mclken_div = (mps->sysclk ? mps->sysclk : 512000000) / MCLK;
- mpc52xx_set_psc_clkdiv(psc_id, mclken_div);
+ ret = mpc52xx_set_psc_clkdiv(psc_id, mclken_div);
+ if (ret)
+ return ret;
/* Reset the PSC into a known state */
out_8(&psc->command, MPC52xx_PSC_RST_RX);
mps->bits_per_word = 8;
- return ret;
+ return 0;
}
static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id)
goto free_master;
ret = mpc52xx_psc_spi_port_config(master->bus_num, mps);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(dev, "can't configure PSC! Is it capable of SPI?\n");
goto free_irq;
+ }
spin_lock_init(&mps->lock);
init_completion(&mps->done);
const u32 *regaddr_p;
u64 regaddr64, size64;
s16 id = -1;
+ int rc;
regaddr_p = of_get_address(op->node, 0, &size64, NULL);
if (!regaddr_p) {
- printk(KERN_ERR "Invalid PSC address\n");
+ dev_err(&op->dev, "Invalid PSC address\n");
return -EINVAL;
}
regaddr64 = of_translate_address(op->node, regaddr_p);
psc_nump = of_get_property(op->node, "cell-index", NULL);
if (!psc_nump || *psc_nump > 5) {
- printk(KERN_ERR "mpc52xx_psc_spi: Device node %s has invalid "
- "cell-index property\n", op->node->full_name);
+ dev_err(&op->dev, "Invalid cell-index property\n");
return -EINVAL;
}
id = *psc_nump + 1;
}
- return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64,
+ rc = mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64,
irq_of_parse_and_map(op->node, 0), id);
+ if (rc == 0)
+ of_register_spi_devices(dev_get_drvdata(&op->dev), op->node);
+
+ return rc;
}
static int __exit mpc52xx_psc_spi_of_remove(struct of_device *op)
--- /dev/null
+/*
+ * MPC52xx SPI bus driver.
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * This is the driver for the MPC5200's dedicated SPI controller.
+ *
+ * Note: this driver does not support the MPC5200 PSC in SPI mode. For
+ * that driver see drivers/spi/mpc52xx_psc_spi.c
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mpc52xx_spi.h>
+#include <linux/of_spi.h>
+#include <linux/io.h>
+#include <asm/time.h>
+#include <asm/mpc52xx.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("MPC52xx SPI (non-PSC) Driver");
+MODULE_LICENSE("GPL");
+
+/* Register offsets */
+#define SPI_CTRL1 0x00
+#define SPI_CTRL1_SPIE (1 << 7)
+#define SPI_CTRL1_SPE (1 << 6)
+#define SPI_CTRL1_MSTR (1 << 4)
+#define SPI_CTRL1_CPOL (1 << 3)
+#define SPI_CTRL1_CPHA (1 << 2)
+#define SPI_CTRL1_SSOE (1 << 1)
+#define SPI_CTRL1_LSBFE (1 << 0)
+
+#define SPI_CTRL2 0x01
+#define SPI_BRR 0x04
+
+#define SPI_STATUS 0x05
+#define SPI_STATUS_SPIF (1 << 7)
+#define SPI_STATUS_WCOL (1 << 6)
+#define SPI_STATUS_MODF (1 << 4)
+
+#define SPI_DATA 0x09
+#define SPI_PORTDATA 0x0d
+#define SPI_DATADIR 0x10
+
+/* FSM state return values */
+#define FSM_STOP 0 /* Nothing more for the state machine to */
+ /* do. If something interesting happens */
+ /* then and IRQ will be received */
+#define FSM_POLL 1 /* need to poll for completion, an IRQ is */
+ /* not expected */
+#define FSM_CONTINUE 2 /* Keep iterating the state machine */
+
+/* Driver internal data */
+struct mpc52xx_spi {
+ struct spi_master *master;
+ u32 sysclk;
+ void __iomem *regs;
+ int irq0; /* MODF irq */
+ int irq1; /* SPIF irq */
+ int ipb_freq;
+
+ /* Statistics */
+ int msg_count;
+ int wcol_count;
+ int wcol_ticks;
+ u32 wcol_tx_timestamp;
+ int modf_count;
+ int byte_count;
+
+ struct list_head queue; /* queue of pending messages */
+ spinlock_t lock;
+ struct work_struct work;
+
+
+ /* Details of current transfer (length, and buffer pointers) */
+ struct spi_message *message; /* current message */
+ struct spi_transfer *transfer; /* current transfer */
+ int (*state)(int irq, struct mpc52xx_spi *ms, u8 status, u8 data);
+ int len;
+ int timestamp;
+ u8 *rx_buf;
+ const u8 *tx_buf;
+ int cs_change;
+};
+
+/*
+ * CS control function
+ */
+static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value)
+{
+ out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08);
+}
+
+/*
+ * Start a new transfer. This is called both by the idle state
+ * for the first transfer in a message, and by the wait state when the
+ * previous transfer in a message is complete.
+ */
+static void mpc52xx_spi_start_transfer(struct mpc52xx_spi *ms)
+{
+ ms->rx_buf = ms->transfer->rx_buf;
+ ms->tx_buf = ms->transfer->tx_buf;
+ ms->len = ms->transfer->len;
+
+ /* Activate the chip select */
+ if (ms->cs_change)
+ mpc52xx_spi_chipsel(ms, 1);
+ ms->cs_change = ms->transfer->cs_change;
+
+ /* Write out the first byte */
+ ms->wcol_tx_timestamp = get_tbl();
+ if (ms->tx_buf)
+ out_8(ms->regs + SPI_DATA, *ms->tx_buf++);
+ else
+ out_8(ms->regs + SPI_DATA, 0);
+}
+
+/* Forward declaration of state handlers */
+static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms,
+ u8 status, u8 data);
+static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms,
+ u8 status, u8 data);
+
+/*
+ * IDLE state
+ *
+ * No transfers are in progress; if another transfer is pending then retrieve
+ * it and kick it off. Otherwise, stop processing the state machine
+ */
+static int
+mpc52xx_spi_fsmstate_idle(int irq, struct mpc52xx_spi *ms, u8 status, u8 data)
+{
+ struct spi_device *spi;
+ int spr, sppr;
+ u8 ctrl1;
+
+ if (status && (irq != NO_IRQ))
+ dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n",
+ status);
+
+ /* Check if there is another transfer waiting. */
+ if (list_empty(&ms->queue))
+ return FSM_STOP;
+
+ /* get the head of the queue */
+ ms->message = list_first_entry(&ms->queue, struct spi_message, queue);
+ list_del_init(&ms->message->queue);
+
+ /* Setup the controller parameters */
+ ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR;
+ spi = ms->message->spi;
+ if (spi->mode & SPI_CPHA)
+ ctrl1 |= SPI_CTRL1_CPHA;
+ if (spi->mode & SPI_CPOL)
+ ctrl1 |= SPI_CTRL1_CPOL;
+ if (spi->mode & SPI_LSB_FIRST)
+ ctrl1 |= SPI_CTRL1_LSBFE;
+ out_8(ms->regs + SPI_CTRL1, ctrl1);
+
+ /* Setup the controller speed */
+ /* minimum divider is '2'. Also, add '1' to force rounding the
+ * divider up. */
+ sppr = ((ms->ipb_freq / ms->message->spi->max_speed_hz) + 1) >> 1;
+ spr = 0;
+ if (sppr < 1)
+ sppr = 1;
+ while (((sppr - 1) & ~0x7) != 0) {
+ sppr = (sppr + 1) >> 1; /* add '1' to force rounding up */
+ spr++;
+ }
+ sppr--; /* sppr quantity in register is offset by 1 */
+ if (spr > 7) {
+ /* Don't overrun limits of SPI baudrate register */
+ spr = 7;
+ sppr = 7;
+ }
+ out_8(ms->regs + SPI_BRR, sppr << 4 | spr); /* Set speed */
+
+ ms->cs_change = 1;
+ ms->transfer = container_of(ms->message->transfers.next,
+ struct spi_transfer, transfer_list);
+
+ mpc52xx_spi_start_transfer(ms);
+ ms->state = mpc52xx_spi_fsmstate_transfer;
+
+ return FSM_CONTINUE;
+}
+
+/*
+ * TRANSFER state
+ *
+ * In the middle of a transfer. If the SPI core has completed processing
+ * a byte, then read out the received data and write out the next byte
+ * (unless this transfer is finished; in which case go on to the wait
+ * state)
+ */
+static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms,
+ u8 status, u8 data)
+{
+ if (!status)
+ return ms->irq0 ? FSM_STOP : FSM_POLL;
+
+ if (status & SPI_STATUS_WCOL) {
+ /* The SPI controller is stoopid. At slower speeds, it may
+ * raise the SPIF flag before the state machine is actually
+ * finished, which causes a collision (internal to the state
+ * machine only). The manual recommends inserting a delay
+ * between receiving the interrupt and sending the next byte,
+ * but it can also be worked around simply by retrying the
+ * transfer which is what we do here. */
+ ms->wcol_count++;
+ ms->wcol_ticks += get_tbl() - ms->wcol_tx_timestamp;
+ ms->wcol_tx_timestamp = get_tbl();
+ data = 0;
+ if (ms->tx_buf)
+ data = *(ms->tx_buf-1);
+ out_8(ms->regs + SPI_DATA, data); /* try again */
+ return FSM_CONTINUE;
+ } else if (status & SPI_STATUS_MODF) {
+ ms->modf_count++;
+ dev_err(&ms->master->dev, "mode fault\n");
+ mpc52xx_spi_chipsel(ms, 0);
+ ms->message->status = -EIO;
+ ms->message->complete(ms->message->context);
+ ms->state = mpc52xx_spi_fsmstate_idle;
+ return FSM_CONTINUE;
+ }
+
+ /* Read data out of the spi device */
+ ms->byte_count++;
+ if (ms->rx_buf)
+ *ms->rx_buf++ = data;
+
+ /* Is the transfer complete? */
+ ms->len--;
+ if (ms->len == 0) {
+ ms->timestamp = get_tbl();
+ ms->timestamp += ms->transfer->delay_usecs * tb_ticks_per_usec;
+ ms->state = mpc52xx_spi_fsmstate_wait;
+ return FSM_CONTINUE;
+ }
+
+ /* Write out the next byte */
+ ms->wcol_tx_timestamp = get_tbl();
+ if (ms->tx_buf)
+ out_8(ms->regs + SPI_DATA, *ms->tx_buf++);
+ else
+ out_8(ms->regs + SPI_DATA, 0);
+
+ return FSM_CONTINUE;
+}
+
+/*
+ * WAIT state
+ *
+ * A transfer has completed; need to wait for the delay period to complete
+ * before starting the next transfer
+ */
+static int
+mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data)
+{
+ if (status && irq)
+ dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n",
+ status);
+
+ if (((int)get_tbl()) - ms->timestamp < 0)
+ return FSM_POLL;
+
+ ms->message->actual_length += ms->transfer->len;
+
+ /* Check if there is another transfer in this message. If there
+ * aren't then deactivate CS, notify sender, and drop back to idle
+ * to start the next message. */
+ if (ms->transfer->transfer_list.next == &ms->message->transfers) {
+ ms->msg_count++;
+ mpc52xx_spi_chipsel(ms, 0);
+ ms->message->status = 0;
+ ms->message->complete(ms->message->context);
+ ms->state = mpc52xx_spi_fsmstate_idle;
+ return FSM_CONTINUE;
+ }
+
+ /* There is another transfer; kick it off */
+
+ if (ms->cs_change)
+ mpc52xx_spi_chipsel(ms, 0);
+
+ ms->transfer = container_of(ms->transfer->transfer_list.next,
+ struct spi_transfer, transfer_list);
+ mpc52xx_spi_start_transfer(ms);
+ ms->state = mpc52xx_spi_fsmstate_transfer;
+ return FSM_CONTINUE;
+}
+
+/**
+ * mpc52xx_spi_fsm_process - Finite State Machine iteration function
+ * @irq: irq number that triggered the FSM or 0 for polling
+ * @ms: pointer to mpc52xx_spi driver data
+ */
+static void mpc52xx_spi_fsm_process(int irq, struct mpc52xx_spi *ms)
+{
+ int rc = FSM_CONTINUE;
+ u8 status, data;
+
+ while (rc == FSM_CONTINUE) {
+ /* Interrupt cleared by read of STATUS followed by
+ * read of DATA registers */
+ status = in_8(ms->regs + SPI_STATUS);
+ data = in_8(ms->regs + SPI_DATA);
+ rc = ms->state(irq, ms, status, data);
+ }
+
+ if (rc == FSM_POLL)
+ schedule_work(&ms->work);
+}
+
+/**
+ * mpc52xx_spi_irq - IRQ handler
+ */
+static irqreturn_t mpc52xx_spi_irq(int irq, void *_ms)
+{
+ struct mpc52xx_spi *ms = _ms;
+ spin_lock(&ms->lock);
+ mpc52xx_spi_fsm_process(irq, ms);
+ spin_unlock(&ms->lock);
+ return IRQ_HANDLED;
+}
+
+/**
+ * mpc52xx_spi_wq - Workqueue function for polling the state machine
+ */
+static void mpc52xx_spi_wq(struct work_struct *work)
+{
+ struct mpc52xx_spi *ms = container_of(work, struct mpc52xx_spi, work);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ms->lock, flags);
+ mpc52xx_spi_fsm_process(0, ms);
+ spin_unlock_irqrestore(&ms->lock, flags);
+}
+
+/*
+ * spi_master ops
+ */
+
+static int mpc52xx_spi_setup(struct spi_device *spi)
+{
+ if (spi->bits_per_word % 8)
+ return -EINVAL;
+
+ if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST))
+ return -EINVAL;
+
+ if (spi->chip_select >= spi->master->num_chipselect)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int mpc52xx_spi_transfer(struct spi_device *spi, struct spi_message *m)
+{
+ struct mpc52xx_spi *ms = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+ spin_lock_irqsave(&ms->lock, flags);
+ list_add_tail(&m->queue, &ms->queue);
+ spin_unlock_irqrestore(&ms->lock, flags);
+ schedule_work(&ms->work);
+
+ return 0;
+}
+
+/*
+ * OF Platform Bus Binding
+ */
+static int __devinit mpc52xx_spi_probe(struct of_device *op,
+ const struct of_device_id *match)
+{
+ struct spi_master *master;
+ struct mpc52xx_spi *ms;
+ void __iomem *regs;
+ int rc;
+
+ /* MMIO registers */
+ dev_dbg(&op->dev, "probing mpc5200 SPI device\n");
+ regs = of_iomap(op->node, 0);
+ if (!regs)
+ return -ENODEV;
+
+ /* initialize the device */
+ out_8(regs+SPI_CTRL1, SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR);
+ out_8(regs + SPI_CTRL2, 0x0);
+ out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */
+ out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */
+
+ /* Clear the status register and re-read it to check for a MODF
+ * failure. This driver cannot currently handle multiple masters
+ * on the SPI bus. This fault will also occur if the SPI signals
+ * are not connected to any pins (port_config setting) */
+ in_8(regs + SPI_STATUS);
+ in_8(regs + SPI_DATA);
+ if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) {
+ dev_err(&op->dev, "mode fault; is port_config correct?\n");
+ rc = -EIO;
+ goto err_init;
+ }
+
+ dev_dbg(&op->dev, "allocating spi_master struct\n");
+ master = spi_alloc_master(&op->dev, sizeof *ms);
+ if (!master) {
+ rc = -ENOMEM;
+ goto err_alloc;
+ }
+ master->bus_num = -1;
+ master->num_chipselect = 1;
+ master->setup = mpc52xx_spi_setup;
+ master->transfer = mpc52xx_spi_transfer;
+ dev_set_drvdata(&op->dev, master);
+
+ ms = spi_master_get_devdata(master);
+ ms->master = master;
+ ms->regs = regs;
+ ms->irq0 = irq_of_parse_and_map(op->node, 0);
+ ms->irq1 = irq_of_parse_and_map(op->node, 1);
+ ms->state = mpc52xx_spi_fsmstate_idle;
+ ms->ipb_freq = mpc5xxx_get_bus_frequency(op->node);
+ spin_lock_init(&ms->lock);
+ INIT_LIST_HEAD(&ms->queue);
+ INIT_WORK(&ms->work, mpc52xx_spi_wq);
+
+ /* Decide if interrupts can be used */
+ if (ms->irq0 && ms->irq1) {
+ rc = request_irq(ms->irq0, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM,
+ "mpc5200-spi-modf", ms);
+ rc |= request_irq(ms->irq1, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM,
+ "mpc5200-spi-spiF", ms);
+ if (rc) {
+ free_irq(ms->irq0, ms);
+ free_irq(ms->irq1, ms);
+ ms->irq0 = ms->irq1 = 0;
+ }
+ } else {
+ /* operate in polled mode */
+ ms->irq0 = ms->irq1 = 0;
+ }
+
+ if (!ms->irq0)
+ dev_info(&op->dev, "using polled mode\n");
+
+ dev_dbg(&op->dev, "registering spi_master struct\n");
+ rc = spi_register_master(master);
+ if (rc)
+ goto err_register;
+
+ of_register_spi_devices(master, op->node);
+ dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n");
+
+ return rc;
+
+ err_register:
+ dev_err(&ms->master->dev, "initialization failed\n");
+ spi_master_put(master);
+ err_alloc:
+ err_init:
+ iounmap(regs);
+ return rc;
+}
+
+static int __devexit mpc52xx_spi_remove(struct of_device *op)
+{
+ struct spi_master *master = dev_get_drvdata(&op->dev);
+ struct mpc52xx_spi *ms = spi_master_get_devdata(master);
+
+ free_irq(ms->irq0, ms);
+ free_irq(ms->irq1, ms);
+
+ spi_unregister_master(master);
+ spi_master_put(master);
+ iounmap(ms->regs);
+
+ return 0;
+}
+
+static struct of_device_id mpc52xx_spi_match[] __devinitdata = {
+ { .compatible = "fsl,mpc5200-spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mpc52xx_spi_match);
+
+static struct of_platform_driver mpc52xx_spi_of_driver = {
+ .owner = THIS_MODULE,
+ .name = "mpc52xx-spi",
+ .match_table = mpc52xx_spi_match,
+ .probe = mpc52xx_spi_probe,
+ .remove = __exit_p(mpc52xx_spi_remove),
+};
+
+static int __init mpc52xx_spi_init(void)
+{
+ return of_register_platform_driver(&mpc52xx_spi_of_driver);
+}
+module_init(mpc52xx_spi_init);
+
+static void __exit mpc52xx_spi_exit(void)
+{
+ of_unregister_platform_driver(&mpc52xx_spi_of_driver);
+}
+module_exit(mpc52xx_spi_exit);
+
*
* Copyright (C) 2006 Polycom, Inc.
*
+ * CPM SPI and QE buffer descriptors mode support:
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
#include <linux/spi/spi_bitbang.h>
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/of_spi.h>
#include <sysdev/fsl_soc.h>
+#include <asm/cpm.h>
+#include <asm/qe.h>
#include <asm/irq.h>
+/* CPM1 and CPM2 are mutually exclusive. */
+#ifdef CONFIG_CPM1
+#include <asm/cpm1.h>
+#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_CH_SPI, 0)
+#else
+#include <asm/cpm2.h>
+#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK, 0, 0)
+#endif
+
/* SPI Controller registers */
struct mpc8xxx_spi_reg {
u8 res1[0x20];
__be32 receive;
};
+/* SPI Parameter RAM */
+struct spi_pram {
+ __be16 rbase; /* Rx Buffer descriptor base address */
+ __be16 tbase; /* Tx Buffer descriptor base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ __be16 mrblr; /* Max receive buffer length */
+ __be32 rstate; /* Internal */
+ __be32 rdp; /* Internal */
+ __be16 rbptr; /* Internal */
+ __be16 rbc; /* Internal */
+ __be32 rxtmp; /* Internal */
+ __be32 tstate; /* Internal */
+ __be32 tdp; /* Internal */
+ __be16 tbptr; /* Internal */
+ __be16 tbc; /* Internal */
+ __be32 txtmp; /* Internal */
+ __be32 res; /* Tx temp. */
+ __be16 rpbase; /* Relocation pointer (CPM1 only) */
+ __be16 res1; /* Reserved */
+};
+
/* SPI Controller mode register definitions */
#define SPMODE_LOOP (1 << 30)
#define SPMODE_CI_INACTIVEHIGH (1 << 29)
#define SPIM_NE 0x00000200 /* Not empty */
#define SPIM_NF 0x00000100 /* Not full */
+#define SPIE_TXB 0x00000200 /* Last char is written to tx fifo */
+#define SPIE_RXB 0x00000100 /* Last char is written to rx buf */
+
+/* SPCOM register values */
+#define SPCOM_STR (1 << 23) /* Start transmit */
+
+#define SPI_PRAM_SIZE 0x100
+#define SPI_MRBLR ((unsigned int)PAGE_SIZE)
+
/* SPI Controller driver's private data. */
struct mpc8xxx_spi {
+ struct device *dev;
struct mpc8xxx_spi_reg __iomem *base;
/* rx & tx bufs from the spi_transfer */
const void *tx;
void *rx;
+ int subblock;
+ struct spi_pram __iomem *pram;
+ struct cpm_buf_desc __iomem *tx_bd;
+ struct cpm_buf_desc __iomem *rx_bd;
+
+ struct spi_transfer *xfer_in_progress;
+
+ /* dma addresses for CPM transfers */
+ dma_addr_t tx_dma;
+ dma_addr_t rx_dma;
+ bool map_tx_dma;
+ bool map_rx_dma;
+
+ dma_addr_t dma_dummy_tx;
+ dma_addr_t dma_dummy_rx;
+
/* functions to deal with different sized buffers */
void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *);
u32(*get_tx) (struct mpc8xxx_spi *);
u32 rx_shift; /* RX data reg shift when in qe mode */
u32 tx_shift; /* TX data reg shift when in qe mode */
- bool qe_mode;
+ unsigned int flags;
struct workqueue_struct *workqueue;
struct work_struct work;
struct completion done;
};
+static void *mpc8xxx_dummy_rx;
+static DEFINE_MUTEX(mpc8xxx_dummy_rx_lock);
+static int mpc8xxx_dummy_rx_refcnt;
+
struct spi_mpc8xxx_cs {
/* functions to deal with different sized buffers */
void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *);
MPC83XX_SPI_TX_BUF(u16)
MPC83XX_SPI_TX_BUF(u32)
+static void mpc8xxx_spi_change_mode(struct spi_device *spi)
+{
+ struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
+ struct spi_mpc8xxx_cs *cs = spi->controller_state;
+ __be32 __iomem *mode = &mspi->base->mode;
+ unsigned long flags;
+
+ if (cs->hw_mode == mpc8xxx_spi_read_reg(mode))
+ return;
+
+ /* Turn off IRQs locally to minimize time that SPI is disabled. */
+ local_irq_save(flags);
+
+ /* Turn off SPI unit prior changing mode */
+ mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE);
+ mpc8xxx_spi_write_reg(mode, cs->hw_mode);
+
+ /* When in CPM mode, we need to reinit tx and rx. */
+ if (mspi->flags & SPI_CPM_MODE) {
+ if (mspi->flags & SPI_QE) {
+ qe_issue_cmd(QE_INIT_TX_RX, mspi->subblock,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+ } else {
+ cpm_command(CPM_SPI_CMD, CPM_CR_INIT_TRX);
+ if (mspi->flags & SPI_CPM1) {
+ out_be16(&mspi->pram->rbptr,
+ in_be16(&mspi->pram->rbase));
+ out_be16(&mspi->pram->tbptr,
+ in_be16(&mspi->pram->tbase));
+ }
+ }
+ }
+
+ local_irq_restore(flags);
+}
+
static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
}
if (value == BITBANG_CS_ACTIVE) {
- u32 regval = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
-
mpc8xxx_spi->rx_shift = cs->rx_shift;
mpc8xxx_spi->tx_shift = cs->tx_shift;
mpc8xxx_spi->get_rx = cs->get_rx;
mpc8xxx_spi->get_tx = cs->get_tx;
- if (cs->hw_mode != regval) {
- unsigned long flags;
- __be32 __iomem *mode = &mpc8xxx_spi->base->mode;
-
- regval = cs->hw_mode;
- /* Turn off IRQs locally to minimize time that
- * SPI is disabled
- */
- local_irq_save(flags);
- /* Turn off SPI unit prior changing mode */
- mpc8xxx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
- mpc8xxx_spi_write_reg(mode, regval);
- local_irq_restore(flags);
- }
+ mpc8xxx_spi_change_mode(spi);
+
if (pdata->cs_control)
pdata->cs_control(spi, pol);
}
int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
{
struct mpc8xxx_spi *mpc8xxx_spi;
- u32 regval;
u8 bits_per_word, pm;
u32 hz;
struct spi_mpc8xxx_cs *cs = spi->controller_state;
if (bits_per_word <= 8) {
cs->get_rx = mpc8xxx_spi_rx_buf_u8;
cs->get_tx = mpc8xxx_spi_tx_buf_u8;
- if (mpc8xxx_spi->qe_mode) {
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
cs->rx_shift = 16;
cs->tx_shift = 24;
}
} else if (bits_per_word <= 16) {
cs->get_rx = mpc8xxx_spi_rx_buf_u16;
cs->get_tx = mpc8xxx_spi_tx_buf_u16;
- if (mpc8xxx_spi->qe_mode) {
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
cs->rx_shift = 16;
cs->tx_shift = 16;
}
} else
return -EINVAL;
- if (mpc8xxx_spi->qe_mode && spi->mode & SPI_LSB_FIRST) {
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE &&
+ spi->mode & SPI_LSB_FIRST) {
cs->tx_shift = 0;
if (bits_per_word <= 8)
cs->rx_shift = 8;
pm--;
cs->hw_mode |= SPMODE_PM(pm);
- regval = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
- if (cs->hw_mode != regval) {
- unsigned long flags;
- __be32 __iomem *mode = &mpc8xxx_spi->base->mode;
-
- regval = cs->hw_mode;
- /* Turn off IRQs locally to minimize time
- * that SPI is disabled
- */
- local_irq_save(flags);
- /* Turn off SPI unit prior changing mode */
- mpc8xxx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
- mpc8xxx_spi_write_reg(mode, regval);
- local_irq_restore(flags);
+
+ mpc8xxx_spi_change_mode(spi);
+ return 0;
+}
+
+static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi)
+{
+ struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd;
+ struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd;
+ unsigned int xfer_len = min(mspi->count, SPI_MRBLR);
+ unsigned int xfer_ofs;
+
+ xfer_ofs = mspi->xfer_in_progress->len - mspi->count;
+
+ out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs);
+ out_be16(&rx_bd->cbd_datlen, 0);
+ out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP);
+
+ out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs);
+ out_be16(&tx_bd->cbd_datlen, xfer_len);
+ out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP |
+ BD_SC_LAST);
+
+ /* start transfer */
+ mpc8xxx_spi_write_reg(&mspi->base->command, SPCOM_STR);
+}
+
+static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi,
+ struct spi_transfer *t, bool is_dma_mapped)
+{
+ struct device *dev = mspi->dev;
+
+ if (is_dma_mapped) {
+ mspi->map_tx_dma = 0;
+ mspi->map_rx_dma = 0;
+ } else {
+ mspi->map_tx_dma = 1;
+ mspi->map_rx_dma = 1;
+ }
+
+ if (!t->tx_buf) {
+ mspi->tx_dma = mspi->dma_dummy_tx;
+ mspi->map_tx_dma = 0;
+ }
+
+ if (!t->rx_buf) {
+ mspi->rx_dma = mspi->dma_dummy_rx;
+ mspi->map_rx_dma = 0;
}
+
+ if (mspi->map_tx_dma) {
+ void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */
+
+ mspi->tx_dma = dma_map_single(dev, nonconst_tx, t->len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, mspi->tx_dma)) {
+ dev_err(dev, "unable to map tx dma\n");
+ return -ENOMEM;
+ }
+ } else {
+ mspi->tx_dma = t->tx_dma;
+ }
+
+ if (mspi->map_rx_dma) {
+ mspi->rx_dma = dma_map_single(dev, mspi->rx, t->len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, mspi->rx_dma)) {
+ dev_err(dev, "unable to map rx dma\n");
+ goto err_rx_dma;
+ }
+ } else {
+ mspi->rx_dma = t->rx_dma;
+ }
+
+ /* enable rx ints */
+ mpc8xxx_spi_write_reg(&mspi->base->mask, SPIE_RXB);
+
+ mspi->xfer_in_progress = t;
+ mspi->count = t->len;
+
+ /* start CPM transfers */
+ mpc8xxx_spi_cpm_bufs_start(mspi);
+
return 0;
+
+err_rx_dma:
+ if (mspi->map_tx_dma)
+ dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE);
+ return -ENOMEM;
}
-static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi)
{
- struct mpc8xxx_spi *mpc8xxx_spi;
- u32 word, len, bits_per_word;
+ struct device *dev = mspi->dev;
+ struct spi_transfer *t = mspi->xfer_in_progress;
+
+ if (mspi->map_tx_dma)
+ dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE);
+ if (mspi->map_tx_dma)
+ dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE);
+ mspi->xfer_in_progress = NULL;
+}
- mpc8xxx_spi = spi_master_get_devdata(spi->master);
+static int mpc8xxx_spi_cpu_bufs(struct mpc8xxx_spi *mspi,
+ struct spi_transfer *t, unsigned int len)
+{
+ u32 word;
+
+ mspi->count = len;
+
+ /* enable rx ints */
+ mpc8xxx_spi_write_reg(&mspi->base->mask, SPIM_NE);
+
+ /* transmit word */
+ word = mspi->get_tx(mspi);
+ mpc8xxx_spi_write_reg(&mspi->base->transmit, word);
+
+ return 0;
+}
+
+static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t,
+ bool is_dma_mapped)
+{
+ struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
+ unsigned int len = t->len;
+ u8 bits_per_word;
+ int ret;
- mpc8xxx_spi->tx = t->tx_buf;
- mpc8xxx_spi->rx = t->rx_buf;
bits_per_word = spi->bits_per_word;
if (t->bits_per_word)
bits_per_word = t->bits_per_word;
- len = t->len;
+
if (bits_per_word > 8) {
/* invalid length? */
if (len & 1)
return -EINVAL;
len /= 2;
}
- mpc8xxx_spi->count = len;
- INIT_COMPLETION(mpc8xxx_spi->done);
+ mpc8xxx_spi->tx = t->tx_buf;
+ mpc8xxx_spi->rx = t->rx_buf;
- /* enable rx ints */
- mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, SPIM_NE);
+ INIT_COMPLETION(mpc8xxx_spi->done);
- /* transmit word */
- word = mpc8xxx_spi->get_tx(mpc8xxx_spi);
- mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->transmit, word);
+ if (mpc8xxx_spi->flags & SPI_CPM_MODE)
+ ret = mpc8xxx_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped);
+ else
+ ret = mpc8xxx_spi_cpu_bufs(mpc8xxx_spi, t, len);
+ if (ret)
+ return ret;
wait_for_completion(&mpc8xxx_spi->done);
/* disable rx ints */
mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0);
+ if (mpc8xxx_spi->flags & SPI_CPM_MODE)
+ mpc8xxx_spi_cpm_bufs_complete(mpc8xxx_spi);
+
return mpc8xxx_spi->count;
}
}
cs_change = t->cs_change;
if (t->len)
- status = mpc8xxx_spi_bufs(spi, t);
+ status = mpc8xxx_spi_bufs(spi, t, m->is_dma_mapped);
if (status) {
status = -EMSGSIZE;
break;
return 0;
}
-static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data)
+static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events)
{
- struct mpc8xxx_spi *mpc8xxx_spi = context_data;
- u32 event;
- irqreturn_t ret = IRQ_NONE;
+ u16 len;
- /* Get interrupt events(tx/rx) */
- event = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->event);
+ dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__,
+ in_be16(&mspi->rx_bd->cbd_datlen), mspi->count);
- /* We need handle RX first */
- if (event & SPIE_NE) {
- u32 rx_data = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->receive);
+ len = in_be16(&mspi->rx_bd->cbd_datlen);
+ if (len > mspi->count) {
+ WARN_ON(1);
+ len = mspi->count;
+ }
- if (mpc8xxx_spi->rx)
- mpc8xxx_spi->get_rx(rx_data, mpc8xxx_spi);
+ /* Clear the events */
+ mpc8xxx_spi_write_reg(&mspi->base->event, events);
- ret = IRQ_HANDLED;
+ mspi->count -= len;
+ if (mspi->count)
+ mpc8xxx_spi_cpm_bufs_start(mspi);
+ else
+ complete(&mspi->done);
+}
+
+static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
+{
+ /* We need handle RX first */
+ if (events & SPIE_NE) {
+ u32 rx_data = mpc8xxx_spi_read_reg(&mspi->base->receive);
+
+ if (mspi->rx)
+ mspi->get_rx(rx_data, mspi);
}
- if ((event & SPIE_NF) == 0)
+ if ((events & SPIE_NF) == 0)
/* spin until TX is done */
- while (((event =
- mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->event)) &
+ while (((events =
+ mpc8xxx_spi_read_reg(&mspi->base->event)) &
SPIE_NF) == 0)
cpu_relax();
- mpc8xxx_spi->count -= 1;
- if (mpc8xxx_spi->count) {
- u32 word = mpc8xxx_spi->get_tx(mpc8xxx_spi);
- mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->transmit, word);
+ /* Clear the events */
+ mpc8xxx_spi_write_reg(&mspi->base->event, events);
+
+ mspi->count -= 1;
+ if (mspi->count) {
+ u32 word = mspi->get_tx(mspi);
+
+ mpc8xxx_spi_write_reg(&mspi->base->transmit, word);
} else {
- complete(&mpc8xxx_spi->done);
+ complete(&mspi->done);
}
+}
- /* Clear the events */
- mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, event);
+static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data)
+{
+ struct mpc8xxx_spi *mspi = context_data;
+ irqreturn_t ret = IRQ_NONE;
+ u32 events;
+
+ /* Get interrupt events(tx/rx) */
+ events = mpc8xxx_spi_read_reg(&mspi->base->event);
+ if (events)
+ ret = IRQ_HANDLED;
+
+ dev_dbg(mspi->dev, "%s: events %x\n", __func__, events);
+
+ if (mspi->flags & SPI_CPM_MODE)
+ mpc8xxx_spi_cpm_irq(mspi, events);
+ else
+ mpc8xxx_spi_cpu_irq(mspi, events);
return ret;
}
+
static int mpc8xxx_spi_transfer(struct spi_device *spi,
struct spi_message *m)
{
kfree(spi->controller_state);
}
+static void *mpc8xxx_spi_alloc_dummy_rx(void)
+{
+ mutex_lock(&mpc8xxx_dummy_rx_lock);
+
+ if (!mpc8xxx_dummy_rx)
+ mpc8xxx_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL);
+ if (mpc8xxx_dummy_rx)
+ mpc8xxx_dummy_rx_refcnt++;
+
+ mutex_unlock(&mpc8xxx_dummy_rx_lock);
+
+ return mpc8xxx_dummy_rx;
+}
+
+static void mpc8xxx_spi_free_dummy_rx(void)
+{
+ mutex_lock(&mpc8xxx_dummy_rx_lock);
+
+ switch (mpc8xxx_dummy_rx_refcnt) {
+ case 0:
+ WARN_ON(1);
+ break;
+ case 1:
+ kfree(mpc8xxx_dummy_rx);
+ mpc8xxx_dummy_rx = NULL;
+ /* fall through */
+ default:
+ mpc8xxx_dummy_rx_refcnt--;
+ break;
+ }
+
+ mutex_unlock(&mpc8xxx_dummy_rx_lock);
+}
+
+static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi)
+{
+ struct device *dev = mspi->dev;
+ struct device_node *np = dev_archdata_get_node(&dev->archdata);
+ const u32 *iprop;
+ int size;
+ unsigned long spi_base_ofs;
+ unsigned long pram_ofs = -ENOMEM;
+
+ /* Can't use of_address_to_resource(), QE muram isn't at 0. */
+ iprop = of_get_property(np, "reg", &size);
+
+ /* QE with a fixed pram location? */
+ if (mspi->flags & SPI_QE && iprop && size == sizeof(*iprop) * 4)
+ return cpm_muram_alloc_fixed(iprop[2], SPI_PRAM_SIZE);
+
+ /* QE but with a dynamic pram location? */
+ if (mspi->flags & SPI_QE) {
+ pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, mspi->subblock,
+ QE_CR_PROTOCOL_UNSPECIFIED, pram_ofs);
+ return pram_ofs;
+ }
+
+ /* CPM1 and CPM2 pram must be at a fixed addr. */
+ if (!iprop || size != sizeof(*iprop) * 4)
+ return -ENOMEM;
+
+ spi_base_ofs = cpm_muram_alloc_fixed(iprop[2], 2);
+ if (IS_ERR_VALUE(spi_base_ofs))
+ return -ENOMEM;
+
+ if (mspi->flags & SPI_CPM2) {
+ pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
+ if (!IS_ERR_VALUE(pram_ofs)) {
+ u16 __iomem *spi_base = cpm_muram_addr(spi_base_ofs);
+
+ out_be16(spi_base, pram_ofs);
+ }
+ } else {
+ struct spi_pram __iomem *pram = cpm_muram_addr(spi_base_ofs);
+ u16 rpbase = in_be16(&pram->rpbase);
+
+ /* Microcode relocation patch applied? */
+ if (rpbase)
+ pram_ofs = rpbase;
+ else
+ return spi_base_ofs;
+ }
+
+ cpm_muram_free(spi_base_ofs);
+ return pram_ofs;
+}
+
+static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi)
+{
+ struct device *dev = mspi->dev;
+ struct device_node *np = dev_archdata_get_node(&dev->archdata);
+ const u32 *iprop;
+ int size;
+ unsigned long pram_ofs;
+ unsigned long bds_ofs;
+
+ if (!(mspi->flags & SPI_CPM_MODE))
+ return 0;
+
+ if (!mpc8xxx_spi_alloc_dummy_rx())
+ return -ENOMEM;
+
+ if (mspi->flags & SPI_QE) {
+ iprop = of_get_property(np, "cell-index", &size);
+ if (iprop && size == sizeof(*iprop))
+ mspi->subblock = *iprop;
+
+ switch (mspi->subblock) {
+ default:
+ dev_warn(dev, "cell-index unspecified, assuming SPI1");
+ /* fall through */
+ case 0:
+ mspi->subblock = QE_CR_SUBBLOCK_SPI1;
+ break;
+ case 1:
+ mspi->subblock = QE_CR_SUBBLOCK_SPI2;
+ break;
+ }
+ }
+
+ pram_ofs = mpc8xxx_spi_cpm_get_pram(mspi);
+ if (IS_ERR_VALUE(pram_ofs)) {
+ dev_err(dev, "can't allocate spi parameter ram\n");
+ goto err_pram;
+ }
+
+ bds_ofs = cpm_muram_alloc(sizeof(*mspi->tx_bd) +
+ sizeof(*mspi->rx_bd), 8);
+ if (IS_ERR_VALUE(bds_ofs)) {
+ dev_err(dev, "can't allocate bds\n");
+ goto err_bds;
+ }
+
+ mspi->dma_dummy_tx = dma_map_single(dev, empty_zero_page, PAGE_SIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, mspi->dma_dummy_tx)) {
+ dev_err(dev, "unable to map dummy tx buffer\n");
+ goto err_dummy_tx;
+ }
+
+ mspi->dma_dummy_rx = dma_map_single(dev, mpc8xxx_dummy_rx, SPI_MRBLR,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, mspi->dma_dummy_rx)) {
+ dev_err(dev, "unable to map dummy rx buffer\n");
+ goto err_dummy_rx;
+ }
+
+ mspi->pram = cpm_muram_addr(pram_ofs);
+
+ mspi->tx_bd = cpm_muram_addr(bds_ofs);
+ mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd));
+
+ /* Initialize parameter ram. */
+ out_be16(&mspi->pram->tbase, cpm_muram_offset(mspi->tx_bd));
+ out_be16(&mspi->pram->rbase, cpm_muram_offset(mspi->rx_bd));
+ out_8(&mspi->pram->tfcr, CPMFCR_EB | CPMFCR_GBL);
+ out_8(&mspi->pram->rfcr, CPMFCR_EB | CPMFCR_GBL);
+ out_be16(&mspi->pram->mrblr, SPI_MRBLR);
+ out_be32(&mspi->pram->rstate, 0);
+ out_be32(&mspi->pram->rdp, 0);
+ out_be16(&mspi->pram->rbptr, 0);
+ out_be16(&mspi->pram->rbc, 0);
+ out_be32(&mspi->pram->rxtmp, 0);
+ out_be32(&mspi->pram->tstate, 0);
+ out_be32(&mspi->pram->tdp, 0);
+ out_be16(&mspi->pram->tbptr, 0);
+ out_be16(&mspi->pram->tbc, 0);
+ out_be32(&mspi->pram->txtmp, 0);
+
+ return 0;
+
+err_dummy_rx:
+ dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE);
+err_dummy_tx:
+ cpm_muram_free(bds_ofs);
+err_bds:
+ cpm_muram_free(pram_ofs);
+err_pram:
+ mpc8xxx_spi_free_dummy_rx();
+ return -ENOMEM;
+}
+
+static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi)
+{
+ struct device *dev = mspi->dev;
+
+ dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE);
+ dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE);
+ cpm_muram_free(cpm_muram_offset(mspi->tx_bd));
+ cpm_muram_free(cpm_muram_offset(mspi->pram));
+ mpc8xxx_spi_free_dummy_rx();
+}
+
+static const char *mpc8xxx_spi_strmode(unsigned int flags)
+{
+ if (flags & SPI_QE_CPU_MODE) {
+ return "QE CPU";
+ } else if (flags & SPI_CPM_MODE) {
+ if (flags & SPI_QE)
+ return "QE";
+ else if (flags & SPI_CPM2)
+ return "CPM2";
+ else
+ return "CPM1";
+ }
+ return "CPU";
+}
+
static struct spi_master * __devinit
mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
{
master->cleanup = mpc8xxx_spi_cleanup;
mpc8xxx_spi = spi_master_get_devdata(master);
- mpc8xxx_spi->qe_mode = pdata->qe_mode;
+ mpc8xxx_spi->dev = dev;
mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8;
mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8;
+ mpc8xxx_spi->flags = pdata->flags;
mpc8xxx_spi->spibrg = pdata->sysclk;
+ ret = mpc8xxx_spi_cpm_init(mpc8xxx_spi);
+ if (ret)
+ goto err_cpm_init;
+
mpc8xxx_spi->rx_shift = 0;
mpc8xxx_spi->tx_shift = 0;
- if (mpc8xxx_spi->qe_mode) {
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
mpc8xxx_spi->rx_shift = 16;
mpc8xxx_spi->tx_shift = 24;
}
mpc8xxx_spi->base = ioremap(mem->start, mem->end - mem->start + 1);
if (mpc8xxx_spi->base == NULL) {
ret = -ENOMEM;
- goto put_master;
+ goto err_ioremap;
}
mpc8xxx_spi->irq = irq;
/* Enable SPI interface */
regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
- if (pdata->qe_mode)
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE)
regval |= SPMODE_OP;
mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval);
if (ret < 0)
goto unreg_master;
- printk(KERN_INFO
- "%s: MPC8xxx SPI Controller driver at 0x%p (irq = %d)\n",
- dev_name(dev), mpc8xxx_spi->base, mpc8xxx_spi->irq);
+ dev_info(dev, "at 0x%p (irq = %d), %s mode\n", mpc8xxx_spi->base,
+ mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags));
return master;
free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
unmap_io:
iounmap(mpc8xxx_spi->base);
-put_master:
+err_ioremap:
+ mpc8xxx_spi_cpm_free(mpc8xxx_spi);
+err_cpm_init:
spi_master_put(master);
err:
return ERR_PTR(ret);
free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
iounmap(mpc8xxx_spi->base);
+ mpc8xxx_spi_cpm_free(mpc8xxx_spi);
return 0;
}
gpio = of_get_gpio_flags(np, i, &flags);
if (!gpio_is_valid(gpio)) {
dev_err(dev, "invalid gpio #%d: %d\n", i, gpio);
+ ret = gpio;
goto err_loop;
}
prop = of_get_property(np, "mode", NULL);
if (prop && !strcmp(prop, "cpu-qe"))
- pdata->qe_mode = 1;
+ pdata->flags = SPI_QE_CPU_MODE;
+ else if (prop && !strcmp(prop, "qe"))
+ pdata->flags = SPI_CPM_MODE | SPI_QE;
+ else if (of_device_is_compatible(np, "fsl,cpm2-spi"))
+ pdata->flags = SPI_CPM_MODE | SPI_CPM2;
+ else if (of_device_is_compatible(np, "fsl,cpm1-spi"))
+ pdata->flags = SPI_CPM_MODE | SPI_CPM1;
ret = of_mpc8xxx_spi_get_chipselects(dev);
if (ret)
{
u8 bits_per_word;
- bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
+ bits_per_word = (t && t->bits_per_word)
+ ? t->bits_per_word : spi->bits_per_word;
if (bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
#define CPM_USB_RESTART_TX_OPCODE 0x0b
#define CPM_USB_EP_SHIFT 5
-#ifndef CONFIG_CPM
-inline int cpm_command(u32 command, u8 opcode)
-{
- return -EOPNOTSUPP;
-}
-#endif
-
-#ifndef CONFIG_QUICC_ENGINE
-inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
- u32 cmd_input)
-{
- return -EOPNOTSUPP;
-}
-#endif
-
#endif /* __FSL_QE_UDC_H */
return 0;
}
+static void offb_destroy(struct fb_info *info)
+{
+ if (info->screen_base)
+ iounmap(info->screen_base);
+ release_mem_region(info->aperture_base, info->aperture_size);
+ framebuffer_release(info);
+}
+
static struct fb_ops offb_ops = {
.owner = THIS_MODULE,
+ .fb_destroy = offb_destroy,
.fb_setcolreg = offb_setcolreg,
.fb_set_par = offb_set_par,
.fb_blank = offb_blank,
var->sync = 0;
var->vmode = FB_VMODE_NONINTERLACED;
+ /* set offb aperture size for generic probing */
+ info->aperture_base = address;
+ info->aperture_size = fix->smem_len;
+
info->fbops = &offb_ops;
info->screen_base = ioremap(address, fix->smem_len);
info->pseudo_palette = (void *) (info + 1);
- info->flags = FBINFO_DEFAULT | foreign_endian;
+ info->flags = FBINFO_DEFAULT | FBINFO_MISC_FIRMWARE | foreign_endian;
fb_alloc_cmap(&info->cmap, 256, 0);
Watchdog timer found in a number of GE Fanuc single board computers.
config MPC5200_WDT
- tristate "MPC5200 Watchdog Timer"
+ bool "MPC52xx Watchdog Timer"
depends on PPC_MPC52xx
+ help
+ Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
config 8xxx_WDT
tristate "MPC8xxx Platform Watchdog Timer"
# POWERPC Architecture
obj-$(CONFIG_GEF_WDT) += gef_wdt.o
-obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o
obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
obj-$(CONFIG_PIKA_WDT) += pika_wdt.o
+++ /dev/null
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/of_platform.h>
-#include <linux/uaccess.h>
-#include <asm/mpc52xx.h>
-
-
-#define GPT_MODE_WDT (1 << 15)
-#define GPT_MODE_CE (1 << 12)
-#define GPT_MODE_MS_TIMER (0x4)
-
-
-struct mpc5200_wdt {
- unsigned count; /* timer ticks before watchdog kicks in */
- long ipb_freq;
- struct miscdevice miscdev;
- struct resource mem;
- struct mpc52xx_gpt __iomem *regs;
- spinlock_t io_lock;
-};
-
-/* is_active stores wether or not the /dev/watchdog device is opened */
-static unsigned long is_active;
-
-/* misc devices don't provide a way, to get back to 'dev' or 'miscdev' from
- * file operations, which sucks. But there can be max 1 watchdog anyway, so...
- */
-static struct mpc5200_wdt *wdt_global;
-
-
-/* helper to calculate timeout in timer counts */
-static void mpc5200_wdt_set_timeout(struct mpc5200_wdt *wdt, int timeout)
-{
- /* use biggest prescaler of 64k */
- wdt->count = (wdt->ipb_freq + 0xffff) / 0x10000 * timeout;
-
- if (wdt->count > 0xffff)
- wdt->count = 0xffff;
-}
-/* return timeout in seconds (calculated from timer count) */
-static int mpc5200_wdt_get_timeout(struct mpc5200_wdt *wdt)
-{
- return wdt->count * 0x10000 / wdt->ipb_freq;
-}
-
-
-/* watchdog operations */
-static int mpc5200_wdt_start(struct mpc5200_wdt *wdt)
-{
- spin_lock(&wdt->io_lock);
- /* disable */
- out_be32(&wdt->regs->mode, 0);
- /* set timeout, with maximum prescaler */
- out_be32(&wdt->regs->count, 0x0 | wdt->count);
- /* enable watchdog */
- out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT |
- GPT_MODE_MS_TIMER);
- spin_unlock(&wdt->io_lock);
-
- return 0;
-}
-static int mpc5200_wdt_ping(struct mpc5200_wdt *wdt)
-{
- spin_lock(&wdt->io_lock);
- /* writing A5 to OCPW resets the watchdog */
- out_be32(&wdt->regs->mode, 0xA5000000 |
- (0xffffff & in_be32(&wdt->regs->mode)));
- spin_unlock(&wdt->io_lock);
- return 0;
-}
-static int mpc5200_wdt_stop(struct mpc5200_wdt *wdt)
-{
- spin_lock(&wdt->io_lock);
- /* disable */
- out_be32(&wdt->regs->mode, 0);
- spin_unlock(&wdt->io_lock);
- return 0;
-}
-
-
-/* file operations */
-static ssize_t mpc5200_wdt_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- struct mpc5200_wdt *wdt = file->private_data;
- mpc5200_wdt_ping(wdt);
- return 0;
-}
-static struct watchdog_info mpc5200_wdt_info = {
- .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .identity = "mpc5200 watchdog on GPT0",
-};
-static long mpc5200_wdt_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- struct mpc5200_wdt *wdt = file->private_data;
- int __user *data = (int __user *)arg;
- int timeout;
- int ret = 0;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- ret = copy_to_user(data, &mpc5200_wdt_info,
- sizeof(mpc5200_wdt_info));
- if (ret)
- ret = -EFAULT;
- break;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- ret = put_user(0, data);
- break;
-
- case WDIOC_KEEPALIVE:
- mpc5200_wdt_ping(wdt);
- break;
-
- case WDIOC_SETTIMEOUT:
- ret = get_user(timeout, data);
- if (ret)
- break;
- mpc5200_wdt_set_timeout(wdt, timeout);
- mpc5200_wdt_start(wdt);
- /* fall through and return the timeout */
-
- case WDIOC_GETTIMEOUT:
- timeout = mpc5200_wdt_get_timeout(wdt);
- ret = put_user(timeout, data);
- break;
-
- default:
- ret = -ENOTTY;
- }
- return ret;
-}
-
-static int mpc5200_wdt_open(struct inode *inode, struct file *file)
-{
- /* /dev/watchdog can only be opened once */
- if (test_and_set_bit(0, &is_active))
- return -EBUSY;
-
- /* Set and activate the watchdog */
- mpc5200_wdt_set_timeout(wdt_global, 30);
- mpc5200_wdt_start(wdt_global);
- file->private_data = wdt_global;
- return nonseekable_open(inode, file);
-}
-static int mpc5200_wdt_release(struct inode *inode, struct file *file)
-{
-#if WATCHDOG_NOWAYOUT == 0
- struct mpc5200_wdt *wdt = file->private_data;
- mpc5200_wdt_stop(wdt);
- wdt->count = 0; /* == disabled */
-#endif
- clear_bit(0, &is_active);
- return 0;
-}
-
-static const struct file_operations mpc5200_wdt_fops = {
- .owner = THIS_MODULE,
- .write = mpc5200_wdt_write,
- .unlocked_ioctl = mpc5200_wdt_ioctl,
- .open = mpc5200_wdt_open,
- .release = mpc5200_wdt_release,
-};
-
-/* module operations */
-static int mpc5200_wdt_probe(struct of_device *op,
- const struct of_device_id *match)
-{
- struct mpc5200_wdt *wdt;
- int err;
- const void *has_wdt;
- int size;
-
- has_wdt = of_get_property(op->node, "has-wdt", NULL);
- if (!has_wdt)
- has_wdt = of_get_property(op->node, "fsl,has-wdt", NULL);
- if (!has_wdt)
- return -ENODEV;
-
- wdt = kzalloc(sizeof(*wdt), GFP_KERNEL);
- if (!wdt)
- return -ENOMEM;
-
- wdt->ipb_freq = mpc5xxx_get_bus_frequency(op->node);
-
- err = of_address_to_resource(op->node, 0, &wdt->mem);
- if (err)
- goto out_free;
- size = wdt->mem.end - wdt->mem.start + 1;
- if (!request_mem_region(wdt->mem.start, size, "mpc5200_wdt")) {
- err = -ENODEV;
- goto out_free;
- }
- wdt->regs = ioremap(wdt->mem.start, size);
- if (!wdt->regs) {
- err = -ENODEV;
- goto out_release;
- }
-
- dev_set_drvdata(&op->dev, wdt);
- spin_lock_init(&wdt->io_lock);
-
- wdt->miscdev = (struct miscdevice) {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &mpc5200_wdt_fops,
- .parent = &op->dev,
- };
- wdt_global = wdt;
- err = misc_register(&wdt->miscdev);
- if (!err)
- return 0;
-
- iounmap(wdt->regs);
-out_release:
- release_mem_region(wdt->mem.start, size);
-out_free:
- kfree(wdt);
- return err;
-}
-
-static int mpc5200_wdt_remove(struct of_device *op)
-{
- struct mpc5200_wdt *wdt = dev_get_drvdata(&op->dev);
-
- mpc5200_wdt_stop(wdt);
- misc_deregister(&wdt->miscdev);
- iounmap(wdt->regs);
- release_mem_region(wdt->mem.start, wdt->mem.end - wdt->mem.start + 1);
- kfree(wdt);
-
- return 0;
-}
-static int mpc5200_wdt_suspend(struct of_device *op, pm_message_t state)
-{
- struct mpc5200_wdt *wdt = dev_get_drvdata(&op->dev);
- mpc5200_wdt_stop(wdt);
- return 0;
-}
-static int mpc5200_wdt_resume(struct of_device *op)
-{
- struct mpc5200_wdt *wdt = dev_get_drvdata(&op->dev);
- if (wdt->count)
- mpc5200_wdt_start(wdt);
- return 0;
-}
-static int mpc5200_wdt_shutdown(struct of_device *op)
-{
- struct mpc5200_wdt *wdt = dev_get_drvdata(&op->dev);
- mpc5200_wdt_stop(wdt);
- return 0;
-}
-
-static struct of_device_id mpc5200_wdt_match[] = {
- { .compatible = "mpc5200-gpt", },
- { .compatible = "fsl,mpc5200-gpt", },
- {},
-};
-static struct of_platform_driver mpc5200_wdt_driver = {
- .owner = THIS_MODULE,
- .name = "mpc5200-gpt-wdt",
- .match_table = mpc5200_wdt_match,
- .probe = mpc5200_wdt_probe,
- .remove = mpc5200_wdt_remove,
- .suspend = mpc5200_wdt_suspend,
- .resume = mpc5200_wdt_resume,
- .shutdown = mpc5200_wdt_shutdown,
-};
-
-
-static int __init mpc5200_wdt_init(void)
-{
- return of_register_platform_driver(&mpc5200_wdt_driver);
-}
-
-static void __exit mpc5200_wdt_exit(void)
-{
- of_unregister_platform_driver(&mpc5200_wdt_driver);
-}
-
-module_init(mpc5200_wdt_init);
-module_exit(mpc5200_wdt_exit);
-
-MODULE_AUTHOR("Domen Puncer <domen.puncer@telargo.com>");
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
#include <linux/init.h>
#include <linux/time.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/stat.h>
#include <linux/string.h>
#include <asm/prom.h>
/*
* Supply data on a read from /proc/device-tree/node/property.
*/
-static int property_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int property_proc_show(struct seq_file *m, void *v)
{
- struct property *pp = data;
- int n;
+ struct property *pp = m->private;
- if (off >= pp->length) {
- *eof = 1;
- return 0;
- }
- n = pp->length - off;
- if (n > count)
- n = count;
- else
- *eof = 1;
- memcpy(page, (char *)pp->value + off, n);
- *start = page;
- return n;
+ seq_write(m, pp->value, pp->length);
+ return 0;
+}
+
+static int property_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, property_proc_show, PDE(inode)->data);
}
+static const struct file_operations property_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = property_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* For a node with a name like "gc@10", we make symlinks called "gc"
* and "@10" to it.
* Unfortunately proc_register puts each new entry
* at the beginning of the list. So we rearrange them.
*/
- ent = create_proc_read_entry(name,
- strncmp(name, "security-", 9)
- ? S_IRUGO : S_IRUSR, de,
- property_read_proc, pp);
+ ent = proc_create_data(name,
+ strncmp(name, "security-", 9) ? S_IRUGO : S_IRUSR,
+ de, &property_proc_fops, pp);
if (ent == NULL)
return NULL;
#ifdef CONFIG_HOTPLUG_CPU
extern void unregister_cpu(struct cpu *cpu);
+extern ssize_t arch_cpu_probe(const char *, size_t);
+extern ssize_t arch_cpu_release(const char *, size_t);
#endif
struct notifier_block;
#define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb)
int cpu_down(unsigned int cpu);
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+extern void cpu_hotplug_driver_lock(void);
+extern void cpu_hotplug_driver_unlock(void);
+#else
+static inline void cpu_hotplug_driver_lock(void)
+{
+}
+
+static inline void cpu_hotplug_driver_unlock(void)
+{
+}
+#endif
+
#else /* CONFIG_HOTPLUG_CPU */
#define get_online_cpus() do { } while (0)
struct fsl_spi_platform_data {
u32 initial_spmode; /* initial SPMODE value */
s16 bus_num;
- bool qe_mode;
+ unsigned int flags;
+#define SPI_QE_CPU_MODE (1 << 0) /* QE CPU ("PIO") mode */
+#define SPI_CPM_MODE (1 << 1) /* CPM/QE ("DMA") mode */
+#define SPI_CPM1 (1 << 2) /* SPI unit is in CPM1 block */
+#define SPI_CPM2 (1 << 3) /* SPI unit is in CPM2 block */
+#define SPI_QE (1 << 4) /* SPI unit is in QE block */
/* board specific information */
u16 max_chipselect;
void (*cs_control)(struct spi_device *spi, bool on);
* lead to a deep sleep (i.e. power removed from the core,
* instead of just the clock).
*/
+#if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND)
int fsl_deep_sleep(void);
+#else
+static inline int fsl_deep_sleep(void) { return 0; }
+#endif
#endif /* _FSL_DEVICE_H_ */
#define KVM_CAP_VCPU_EVENTS 41
#endif
#define KVM_CAP_S390_PSW 42
+#define KVM_CAP_PPC_SEGSTATE 43
#ifdef KVM_CAP_IRQ_ROUTING
#define PCI_DEVICE_ID_MPC8536 0x0051
#define PCI_DEVICE_ID_P2020E 0x0070
#define PCI_DEVICE_ID_P2020 0x0071
+#define PCI_DEVICE_ID_P2010E 0x0078
+#define PCI_DEVICE_ID_P2010 0x0079
+#define PCI_DEVICE_ID_P1020E 0x0100
+#define PCI_DEVICE_ID_P1020 0x0101
+#define PCI_DEVICE_ID_P1011E 0x0108
+#define PCI_DEVICE_ID_P1011 0x0109
+#define PCI_DEVICE_ID_P1022E 0x0110
+#define PCI_DEVICE_ID_P1022 0x0111
+#define PCI_DEVICE_ID_P1013E 0x0118
+#define PCI_DEVICE_ID_P1013 0x0119
+#define PCI_DEVICE_ID_P4080E 0x0400
+#define PCI_DEVICE_ID_P4080 0x0401
+#define PCI_DEVICE_ID_P4040E 0x0408
+#define PCI_DEVICE_ID_P4040 0x0409
#define PCI_DEVICE_ID_MPC8641 0x7010
#define PCI_DEVICE_ID_MPC8641D 0x7011
#define PCI_DEVICE_ID_MPC8610 0x7018
--- /dev/null
+
+#ifndef INCLUDE_MPC5200_SPI_H
+#define INCLUDE_MPC5200_SPI_H
+
+extern void mpc52xx_spi_set_premessage_hook(struct spi_master *master,
+ void (*hook)(struct spi_message *m,
+ void *context),
+ void *hook_context);
+
+#endif
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
+#include <asm-generic/bitops/le.h>
#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
#include "coalesced_mmio.h"
unsigned long rel_gfn = gfn - memslot->base_gfn;
/* avoid RMW */
- if (!test_bit(rel_gfn, memslot->dirty_bitmap))
- set_bit(rel_gfn, memslot->dirty_bitmap);
+ if (!generic_test_le_bit(rel_gfn, memslot->dirty_bitmap))
+ generic___set_le_bit(rel_gfn, memslot->dirty_bitmap);
}
}
git.openpandora.org / pandora-kernel.git / commitdiff