/*
- lm85.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
-
Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
- Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
- Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
- Copyright (C) 2007--2009 Jean Delvare <khali@linux-fr.org>
-
- Chip details at <http://www.national.com/ds/LM/LM85.pdf>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * lm85.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
+
* Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
+ * Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
+ * Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
+ * Copyright (C) 2007--2009 Jean Delvare <khali@linux-fr.org>
+ *
+ * Chip details at <http://www.national.com/ds/LM/LM85.pdf>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
#include <linux/module.h>
#include <linux/init.h>
/* The LM85 registers */
-#define LM85_REG_IN(nr) (0x20 + (nr))
-#define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2)
-#define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2)
+#define LM85_REG_IN(nr) (0x20 + (nr))
+#define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2)
+#define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2)
-#define LM85_REG_TEMP(nr) (0x25 + (nr))
-#define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2)
-#define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2)
+#define LM85_REG_TEMP(nr) (0x25 + (nr))
+#define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2)
+#define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2)
/* Fan speeds are LSB, MSB (2 bytes) */
-#define LM85_REG_FAN(nr) (0x28 + (nr) * 2)
-#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) * 2)
+#define LM85_REG_FAN(nr) (0x28 + (nr) * 2)
+#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) * 2)
-#define LM85_REG_PWM(nr) (0x30 + (nr))
+#define LM85_REG_PWM(nr) (0x30 + (nr))
-#define LM85_REG_COMPANY 0x3e
-#define LM85_REG_VERSTEP 0x3f
+#define LM85_REG_COMPANY 0x3e
+#define LM85_REG_VERSTEP 0x3f
-#define ADT7468_REG_CFG5 0x7c
-#define ADT7468_OFF64 (1 << 0)
-#define ADT7468_HFPWM (1 << 1)
-#define IS_ADT7468_OFF64(data) \
+#define ADT7468_REG_CFG5 0x7c
+#define ADT7468_OFF64 (1 << 0)
+#define ADT7468_HFPWM (1 << 1)
+#define IS_ADT7468_OFF64(data) \
((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
-#define IS_ADT7468_HFPWM(data) \
+#define IS_ADT7468_HFPWM(data) \
((data)->type == adt7468 && !((data)->cfg5 & ADT7468_HFPWM))
/* These are the recognized values for the above regs */
-#define LM85_COMPANY_NATIONAL 0x01
-#define LM85_COMPANY_ANALOG_DEV 0x41
-#define LM85_COMPANY_SMSC 0x5c
-#define LM85_VERSTEP_VMASK 0xf0
-#define LM85_VERSTEP_GENERIC 0x60
-#define LM85_VERSTEP_GENERIC2 0x70
-#define LM85_VERSTEP_LM85C 0x60
-#define LM85_VERSTEP_LM85B 0x62
-#define LM85_VERSTEP_LM96000_1 0x68
-#define LM85_VERSTEP_LM96000_2 0x69
-#define LM85_VERSTEP_ADM1027 0x60
-#define LM85_VERSTEP_ADT7463 0x62
-#define LM85_VERSTEP_ADT7463C 0x6A
-#define LM85_VERSTEP_ADT7468_1 0x71
-#define LM85_VERSTEP_ADT7468_2 0x72
-#define LM85_VERSTEP_EMC6D100_A0 0x60
-#define LM85_VERSTEP_EMC6D100_A1 0x61
-#define LM85_VERSTEP_EMC6D102 0x65
-#define LM85_VERSTEP_EMC6D103_A0 0x68
-#define LM85_VERSTEP_EMC6D103_A1 0x69
-#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */
-
-#define LM85_REG_CONFIG 0x40
-
-#define LM85_REG_ALARM1 0x41
-#define LM85_REG_ALARM2 0x42
-
-#define LM85_REG_VID 0x43
+#define LM85_COMPANY_NATIONAL 0x01
+#define LM85_COMPANY_ANALOG_DEV 0x41
+#define LM85_COMPANY_SMSC 0x5c
+#define LM85_VERSTEP_VMASK 0xf0
+#define LM85_VERSTEP_GENERIC 0x60
+#define LM85_VERSTEP_GENERIC2 0x70
+#define LM85_VERSTEP_LM85C 0x60
+#define LM85_VERSTEP_LM85B 0x62
+#define LM85_VERSTEP_LM96000_1 0x68
+#define LM85_VERSTEP_LM96000_2 0x69
+#define LM85_VERSTEP_ADM1027 0x60
+#define LM85_VERSTEP_ADT7463 0x62
+#define LM85_VERSTEP_ADT7463C 0x6A
+#define LM85_VERSTEP_ADT7468_1 0x71
+#define LM85_VERSTEP_ADT7468_2 0x72
+#define LM85_VERSTEP_EMC6D100_A0 0x60
+#define LM85_VERSTEP_EMC6D100_A1 0x61
+#define LM85_VERSTEP_EMC6D102 0x65
+#define LM85_VERSTEP_EMC6D103_A0 0x68
+#define LM85_VERSTEP_EMC6D103_A1 0x69
+#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */
+
+#define LM85_REG_CONFIG 0x40
+
+#define LM85_REG_ALARM1 0x41
+#define LM85_REG_ALARM2 0x42
+
+#define LM85_REG_VID 0x43
/* Automated FAN control */
-#define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr))
-#define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr))
-#define LM85_REG_AFAN_SPIKE1 0x62
-#define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr))
-#define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr))
-#define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr))
-#define LM85_REG_AFAN_HYST1 0x6d
-#define LM85_REG_AFAN_HYST2 0x6e
-
-#define ADM1027_REG_EXTEND_ADC1 0x76
-#define ADM1027_REG_EXTEND_ADC2 0x77
+#define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr))
+#define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr))
+#define LM85_REG_AFAN_SPIKE1 0x62
+#define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr))
+#define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr))
+#define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr))
+#define LM85_REG_AFAN_HYST1 0x6d
+#define LM85_REG_AFAN_HYST2 0x6e
+
+#define ADM1027_REG_EXTEND_ADC1 0x76
+#define ADM1027_REG_EXTEND_ADC2 0x77
#define EMC6D100_REG_ALARM3 0x7d
/* IN5, IN6 and IN7 */
-#define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5))
-#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr) - 5) * 2)
-#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr) - 5) * 2)
-#define EMC6D102_REG_EXTEND_ADC1 0x85
-#define EMC6D102_REG_EXTEND_ADC2 0x86
-#define EMC6D102_REG_EXTEND_ADC3 0x87
-#define EMC6D102_REG_EXTEND_ADC4 0x88
-
-
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
+#define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5))
+#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr) - 5) * 2)
+#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr) - 5) * 2)
+#define EMC6D102_REG_EXTEND_ADC1 0x85
+#define EMC6D102_REG_EXTEND_ADC2 0x86
+#define EMC6D102_REG_EXTEND_ADC3 0x87
+#define EMC6D102_REG_EXTEND_ADC4 0x88
+
+
+/*
+ * Conversions. Rounding and limit checking is only done on the TO_REG
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
*/
/* IN are scaled according to built-in resistors */
#define PWM_FROM_REG(val) (val)
-/* ZONEs have the following parameters:
+/*
+ * ZONEs have the following parameters:
* Limit (low) temp, 1. degC
* Hysteresis (below limit), 1. degC (0-15)
* Range of speed control, .1 degC (2-80)
return map[reg & 0x07];
}
-/* Since we can't use strings, I'm abusing these numbers
+/*
+ * Since we can't use strings, I'm abusing these numbers
* to stand in for the following meanings:
* 1 -- PWM responds to Zone 1
* 2 -- PWM responds to Zone 2
#define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15)
#define HYST_FROM_REG(val) ((val) * 1000)
-/* Chip sampling rates
+/*
+ * Chip sampling rates
*
* Some sensors are not updated more frequently than once per second
* so it doesn't make sense to read them more often than that.
#define LM85_DATA_INTERVAL (HZ + HZ / 2)
#define LM85_CONFIG_INTERVAL (1 * 60 * HZ)
-/* LM85 can automatically adjust fan speeds based on temperature
+/*
+ * LM85 can automatically adjust fan speeds based on temperature
* This structure encapsulates an entire Zone config. There are
* three zones (one for each temperature input) on the lm85
*/
u8 hyst; /* Low limit hysteresis. (0-15) */
u8 range; /* Temp range, encoded */
s8 critical; /* "All fans ON" temp limit */
- u8 max_desired; /* Actual "max" temperature specified. Preserved
+ u8 max_desired; /*
+ * Actual "max" temperature specified. Preserved
* to prevent "drift" as other autofan control
* values change.
*/
u8 min_off; /* Min PWM or OFF below "limit", flag */
};
-/* For each registered chip, we need to keep some data in memory.
- The structure is dynamically allocated. */
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
struct lm85_data {
struct device *hwmon_dev;
const int *freq_map;
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- unsigned long val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val);
const char *buf, size_t count)
{
struct lm85_data *data = dev_get_drvdata(dev);
- data->vrm = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ data->vrm = val;
return count;
}
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->pwm[nr] = PWM_TO_REG(val);
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
u8 config;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
switch (val) {
case 0:
config = 7;
break;
case 2:
- /* Here we have to choose arbitrarily one of the 5 possible
- configurations; I go for the safest */
+ /*
+ * Here we have to choose arbitrarily one of the 5 possible
+ * configurations; I go for the safest
+ */
config = 6;
break;
default:
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
- /* The ADT7468 has a special high-frequency PWM output mode,
+ /*
+ * The ADT7468 has a special high-frequency PWM output mode,
* where all PWM outputs are driven by a 22.5 kHz clock.
- * This might confuse the user, but there's not much we can do. */
+ * This might confuse the user, but there's not much we can do.
+ */
if (data->type == adt7468 && val >= 11300) { /* High freq. mode */
data->cfg5 &= ~ADT7468_HFPWM;
lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->in_min[nr] = INS_TO_REG(nr, val);
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->in_max[nr] = INS_TO_REG(nr, val);
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
if (IS_ADT7468_OFF64(data))
val += 64;
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
if (IS_ADT7468_OFF64(data))
val += 64;
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->autofan[nr].min_pwm = PWM_TO_REG(val);
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
u8 tmp;
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->autofan[nr].min_off = val;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
int min;
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
min = TEMP_FROM_REG(data->zone[nr].limit);
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->zone[nr].limit = TEMP_TO_REG(val);
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
int min;
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
min = TEMP_FROM_REG(data->zone[nr].limit);
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->zone[nr].critical = TEMP_TO_REG(val);
goto err_remove_files;
}
- /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
- as a sixth digital VID input rather than an analog input. */
+ /*
+ * The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
+ * as a sixth digital VID input rather than an analog input.
+ */
if (data->type == adt7463 || data->type == adt7468) {
u8 vid = lm85_read_value(client, LM85_REG_VID);
if (vid & 0x80)
data->has_vid5 = true;
}
- if (!data->has_vid5)
- if ((err = sysfs_create_group(&client->dev.kobj,
- &lm85_group_in4)))
+ if (!data->has_vid5) {
+ err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4);
+ if (err)
goto err_remove_files;
+ }
/* The EMC6D100 has 3 additional voltage inputs */
- if (data->type == emc6d100)
- if ((err = sysfs_create_group(&client->dev.kobj,
- &lm85_group_in567)))
+ if (data->type == emc6d100) {
+ err = sysfs_create_group(&client->dev.kobj, &lm85_group_in567);
+ if (err)
goto err_remove_files;
+ }
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
/* Things that change quickly */
dev_dbg(&client->dev, "Reading sensor values\n");
- /* Have to read extended bits first to "freeze" the
+ /*
+ * Have to read extended bits first to "freeze" the
* more significant bits that are read later.
* There are 2 additional resolution bits per channel and we
* have room for 4, so we shift them to the left.
EMC6D100_REG_ALARM3) << 16;
} else if (data->type == emc6d102 || data->type == emc6d103 ||
data->type == emc6d103s) {
- /* Have to read LSB bits after the MSB ones because
- the reading of the MSB bits has frozen the
- LSBs (backward from the ADM1027).
+ /*
+ * Have to read LSB bits after the MSB ones because
+ * the reading of the MSB bits has frozen the
+ * LSBs (backward from the ADM1027).
*/
int ext1 = lm85_read_value(client,
EMC6D102_REG_EXTEND_ADC1);
git.openpandora.org / pandora-kernel.git / commitdiff