mx7ulp: Remove the _RUN notation from the PMC1 LDOVL definitions

The LDOVL definitions is common to all the modes, not only RUN mode,
so in order to avoid confusion, remove the _RUN notation from the PMC1
LDOVL definitions.

Signed-off-by: Fabio Estevam <festevam@gmail.com>

diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c
index fd40af7..8345b01 100644 (file)
--- a/arch/arm/mach-imx/mx7ulp/soc.c
+++ b/arch/arm/mach-imx/mx7ulp/soc.c
@@ -19,10 +19,10 @@
 #define PMC1_RUN               0x8
 #define PMC1_STOP              0x10
 #define PMC1_VLPS              0x14
-#define PMC1_RUN_LDOVL_SHIFT   16
-#define PMC1_RUN_LDOVL_MASK    (0x3f << PMC1_RUN_LDOVL_SHIFT)
-#define PMC1_RUN_LDOVL_900     0x1e
-#define PMC1_RUN_LDOVL_950     0x23
+#define PMC1_LDOVL_SHIFT       16
+#define PMC1_LDOVL_MASK                (0x3f << PMC1_LDOVL_SHIFT)
+#define PMC1_LDOVL_900         0x1e
+#define PMC1_LDOVL_950         0x23
 #define PMC1_STATUS            0x20
 #define PMC1_STATUS_LDOVLF     BIT(8)
 
@@ -127,8 +127,8 @@ static void init_ldo_mode(void)
 
        /* Set LDOVL to 0.95V in PMC1_RUN */
        reg = readl(PMC1_BASE_ADDR + PMC1_RUN);
-       reg &= ~PMC1_RUN_LDOVL_MASK;
-       reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT);
+       reg &= ~PMC1_LDOVL_MASK;
+       reg |= (PMC1_LDOVL_950 << PMC1_LDOVL_SHIFT);
        writel(PMC1_BASE_ADDR + PMC1_RUN, reg);
 
        /* Wait for LDOVLF to be cleared */
@@ -138,14 +138,14 @@ static void init_ldo_mode(void)
 
        /* Set LDOVL to 0.95V in PMC1_STOP */
        reg = readl(PMC1_BASE_ADDR + PMC1_STOP);
-       reg &= ~PMC1_RUN_LDOVL_MASK;
-       reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT);
+       reg &= ~PMC1_LDOVL_MASK;
+       reg |= (PMC1_LDOVL_950 << PMC1_LDOVL_SHIFT);
        writel(PMC1_BASE_ADDR + PMC1_STOP, reg);
 
        /* Set LDOVL to 0.90V in PMC1_VLPS */
        reg = readl(PMC1_BASE_ADDR + PMC1_VLPS);
-       reg &= ~PMC1_RUN_LDOVL_MASK;
-       reg |= (PMC1_RUN_LDOVL_900 << PMC1_RUN_LDOVL_SHIFT);
+       reg &= ~PMC1_LDOVL_MASK;
+       reg |= (PMC1_LDOVL_900 << PMC1_LDOVL_SHIFT);
        writel(PMC1_BASE_ADDR + PMC1_VLPS, reg);
 
        /* Set LDOEN bit */