+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
+static struct pxa2xx_spi_master corgi_spi_info = {
+ .num_chipselect = 3,
+};
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = CORGI_GPIO_TP_INT,
+};
+
+static void corgi_ads7846_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+ .cs_control = corgi_ads7846_cs,
+};
+
+static void corgi_notify_intensity(int intensity)
+{
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+ else
+ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+}
+
+static void corgi_bl_kick_battery(void)
+{
+ void (*kick_batt)(void);
+
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
+ }
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+ .init_mode = CORGI_LCD_MODE_VGA,
+ .max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
+ .notify = corgi_notify_intensity,
+ .kick_battery = corgi_bl_kick_battery,
+};
+
+static void corgi_lcdcon_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+ .cs_control = corgi_lcdcon_cs,
+};
+
+static void corgi_max1111_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+ .cs_control = corgi_max1111_cs,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &corgi_ads7846_info,
+ .controller_data= &corgi_ads7846_chip,
+ .irq = gpio_to_irq(CORGI_GPIO_TP_INT),
+ }, {
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 1,
+ .chip_select = 1,
+ .platform_data = &corgi_lcdcon_info,
+ .controller_data= &corgi_lcdcon_chip,
+ }, {
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &corgi_max1111_chip,
+ },
+};
+
+static void __init corgi_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
+ if (err)
+ return;
+
+ err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
+ if (err)
+ goto err_free_1;
+
+ err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
+ if (err)
+ goto err_free_2;
+
+ gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
+ gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
+ gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
+
+ pxa2xx_set_spi_info(1, &corgi_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+ return;
+
+err_free_2:
+ gpio_free(CORGI_GPIO_LCDCON_CS);
+err_free_1:
+ gpio_free(CORGI_GPIO_ADS7846_CS);
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif