commit
aaa10eb1d0034eccc096f583fe308f0921617598 upstream.
The rules used to make 8250_pci "ignore" the PCH uarts are lacking pci subids
entries, preventing it to match and thus is breaking serial port support for
theses systems.
This has been tested on a nanoETXexpress-TT, which has a specifici uart clock.
Tested-by: Erwan Velu <Erwan.Velu@zodiacaerospace.com>
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8812,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8812,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8813,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8813,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8814,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8814,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8027,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8027,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8028,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8028,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8029,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8029,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800C,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800C,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800D,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800D,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
.init = pci_eg20t_init,
.setup = pci_default_setup,
},