The AT91SAM9 microcontrollers with master clock higher then 105 MHz
and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This
lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver
does not detect ATA device.
Signed-off-by: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
#define DRV_NAME "pata_at91"
#define DRV_NAME "pata_at91"
-#define DRV_VERSION "0.1"
+#define DRV_VERSION "0.2"
#define CF_IDE_OFFSET 0x00c00000
#define CF_ALT_IDE_OFFSET 0x00e00000
#define CF_IDE_RES_SIZE 0x08
#define CF_IDE_OFFSET 0x00c00000
#define CF_ALT_IDE_OFFSET 0x00e00000
#define CF_IDE_RES_SIZE 0x08
+#define NCS_RD_PULSE_LIMIT 0x3f /* maximal value for pulse bitfields */
struct at91_ide_info {
unsigned long mode;
struct at91_ide_info {
unsigned long mode;
/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
ncs_read_setup = 1;
ncs_read_pulse = read_cycle - 2;
/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
ncs_read_setup = 1;
ncs_read_pulse = read_cycle - 2;
+ if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) {
+ ncs_read_pulse = NCS_RD_PULSE_LIMIT;
+ dev_warn(dev, "ncs_read_pulse limited to maximal value %lu\n",
+ ncs_read_pulse);
+ }
/* Write timings same as read timings */
write_cycle = read_cycle;
/* Write timings same as read timings */
write_cycle = read_cycle;