m68k: drop unused Kconfig symbols

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index d964dc4..dbff941 100644 (file)
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -77,32 +77,6 @@ config MULTIFACE_III_TTY
 
          To compile this driver as a module, choose M here.
 
 
          To compile this driver as a module, choose M here.
 

-config GVPIOEXT
-       tristate "GVP IO-Extender support"
-       depends on PARPORT=n && ZORRO
-       help
-         If you want to use a GVP IO-Extender serial card in Linux, say Y.
-         Otherwise, say N.
-
-config GVPIOEXT_LP
-       tristate "GVP IO-Extender parallel printer support"
-       depends on GVPIOEXT
-       help
-         Say Y to enable driving a printer from the parallel port on your
-         GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
-       tristate "GVP IO-Extender PLIP support"
-       depends on GVPIOEXT
-       help
-         Say Y to enable doing IP over the parallel port on your GVP
-         IO-Extender card, N otherwise.
-
-config MAC_HID
-       bool
-       depends on INPUT_ADBHID
-       default y
-

 config HPDCA
        tristate "HP DCA serial support"
        depends on DIO && SERIAL_8250
 config HPDCA
        tristate "HP DCA serial support"
        depends on DIO && SERIAL_8250


@@ -145,7 +119,7 @@ config DN_SERIAL
 
 config SERIAL_CONSOLE
        bool "Support for serial port console"
 
 config SERIAL_CONSOLE
        bool "Support for serial port console"

-       depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+       depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)

        ---help---
          If you say Y here, it will be possible to use a serial port as the
          system console (the system console is the device which receives all
        ---help---
          If you say Y here, it will be possible to use a serial port as the
          system console (the system console is the device which receives all

diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 7d5c20b..ef4a26a 100644 (file)
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -303,9 +303,6 @@ config COBRA5282
        help
          Support for the senTec COBRA5282 board.
 
        help
          Support for the senTec COBRA5282 board.
 

-config EMAC_INC
-       bool
-

 config SOM5282EM
        bool "EMAC.Inc SOM5282EM board support"
        depends on M528x
 config SOM5282EM
        bool "EMAC.Inc SOM5282EM board support"
        depends on M528x


@@ -371,27 +368,21 @@ config FIREBEE
        help
          Support for the FireBee ColdFire 5475 based board.
 
        help
          Support for the FireBee ColdFire 5475 based board.
 

-config HW_FEITH
-       bool
-

 config CLEOPATRA
        bool "Feith CLEOPATRA board support"
        depends on (M5307 || M5407)
 config CLEOPATRA
        bool "Feith CLEOPATRA board support"
        depends on (M5307 || M5407)

-       select HW_FEITH

        help
          Support for the Feith Cleopatra boards.
 
 config CANCam
        bool "Feith CANCam board support"
        depends on M5272
        help
          Support for the Feith Cleopatra boards.
 
 config CANCam
        bool "Feith CANCam board support"
        depends on M5272

-       select HW_FEITH

        help
          Support for the Feith CANCam board.
 
 config SCALES
        bool "Feith SCALES board support"
        depends on M5272
        help
          Support for the Feith CANCam board.
 
 config SCALES
        bool "Feith SCALES board support"
        depends on M5272

-       select HW_FEITH

        help
          Support for the Feith SCALES board.
 
        help
          Support for the Feith SCALES board.
 


@@ -438,13 +429,6 @@ if !MMU || COLDFIRE
 
 comment "Machine Options"
 
 
 comment "Machine Options"
 

-config ROMFS_FROM_ROM
-       bool "ROMFS image not RAM resident"
-       depends on (NETtel || SNAPGEAR)
-       help
-         The ROMfs filesystem will stay resident in the FLASH/ROM, not be
-         moved into RAM.
-

 config UBOOT
        bool "Support for U-Boot command line parameters"
        help
 config UBOOT
        bool "Support for U-Boot command line parameters"
        help


@@ -524,33 +508,6 @@ config KERNELBASE
          a system with the RAM based at address 0, and leaving enough room
          for the theoretical maximum number of 256 vectors.
 
          a system with the RAM based at address 0, and leaving enough room
          for the theoretical maximum number of 256 vectors.
 

-choice
-       prompt "RAM bus width"
-       default RAMAUTOBIT
-
-config RAMAUTOBIT
-       bool "AUTO"
-       help
-         Select the physical RAM data bus size. Not needed on most platforms,
-         so you can generally choose AUTO.
-
-config RAM8BIT
-       bool "8bit"
-       help
-         Configure RAM bus to be 8 bits wide.
-
-config RAM16BIT
-       bool "16bit"
-       help
-         Configure RAM bus to be 16 bits wide.
-
-config RAM32BIT
-       bool "32bit"
-       help
-         Configure RAM bus to be 32 bits wide.
-
-endchoice
-

 comment "ROM configuration"
 
 config ROM
 comment "ROM configuration"
 
 config ROM