+Booting
+^^^^^^^
+
+The default boot process is to load and boot the files ``/uImage`` and
+``/k210.dtb`` off of the first partition of the MMC. For Linux, this will result
+in an output like
+
+.. code-block:: none
+
+ U-Boot 2020.10-00691-gd1d651d988-dirty (Oct 16 2020 - 17:05:24 -0400)
+
+ DRAM: 8 MiB
+ MMC: spi@53000000:slot@0: 0
+ Loading Environment from SPIFlash... SF: Detected w25q128fw with page size 256 Bytes, erase size 4 KiB, total 16 MiB
+ OK
+ In: serial@38000000
+ Out: serial@38000000
+ Err: serial@38000000
+ Hit any key to stop autoboot: 0
+ 1827380 bytes read in 1044 ms (1.7 MiB/s)
+ 13428 bytes read in 10 ms (1.3 MiB/s)
+ ## Booting kernel from Legacy Image at 80060000 ...
+ Image Name: linux
+ Image Type: RISC-V Linux Kernel Image (uncompressed)
+ Data Size: 1827316 Bytes = 1.7 MiB
+ Load Address: 80000000
+ Entry Point: 80000000
+ Verifying Checksum ... OK
+ ## Flattened Device Tree blob at 80400000
+ Booting using the fdt blob at 0x80400000
+ Loading Kernel Image
+ Loading Device Tree to 00000000803f9000, end 00000000803ff473 ... OK
+
+ Starting kernel ...
+
+ [ 0.000000] Linux version 5.9.0-00021-g6dcc2f0814c6-dirty (sean@godwin) (riscv64-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #34 SMP Fri Oct 16 14:40:57 EDT 2020
+ [ 0.000000] earlycon: sifive0 at MMIO 0x0000000038000000 (options '115200n8')
+ [ 0.000000] printk: bootconsole [sifive0] enabled
+ [ 0.000000] Zone ranges:
+ [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000807fffff]
+ [ 0.000000] Normal empty
+ [ 0.000000] Movable zone start for each node
+ [ 0.000000] Early memory node ranges
+ [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000807fffff]
+ [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000807fffff]
+ [ 0.000000] riscv: ISA extensions acdfgim
+ [ 0.000000] riscv: ELF capabilities acdfim
+ [ 0.000000] percpu: max_distance=0x18000 too large for vmalloc space 0x0
+ [ 0.000000] percpu: Embedded 12 pages/cpu s18848 r0 d30304 u49152
+ [ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 2020
+ [ 0.000000] Kernel command line: earlycon console=ttySIF0
+ [ 0.000000] Dentry cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
+ [ 0.000000] Inode-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
+ [ 0.000000] Sorting __ex_table...
+ [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
+ [ 0.000000] Memory: 6004K/8192K available (1139K kernel code, 126K rwdata, 198K rodata, 90K init, 81K bss, 2188K reserved, 0K cma-reserved)
+ [ 0.000000] rcu: Hierarchical RCU implementation.
+ [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
+ [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
+ [ 0.000000] riscv-intc: 64 local interrupts mapped
+ [ 0.000000] plic: interrupt-controller@C000000: mapped 65 interrupts with 2 handlers for 2 contexts.
+ [ 0.000000] random: get_random_bytes called from 0x00000000800019a8 with crng_init=0
+ [ 0.000000] k210-clk: clock-controller
+ [ 0.000000] k210-clk: clock-controller: fixed-rate 26 MHz osc base clock
+ [ 0.000000] clint: clint@2000000: timer running at 7800000 Hz
+ [ 0.000000] clocksource: clint_clocksource: mask: 0xffffffffffffffff max_cycles: 0x3990be68b, max_idle_ns: 881590404272 ns
+ [ 0.000014] sched_clock: 64 bits at 7MHz, resolution 128ns, wraps every 4398046511054ns
+ [ 0.008450] Console: colour dummy device 80x25
+ [ 0.012494] Calibrating delay loop (skipped), value calculated using timer frequency.. 15.60 BogoMIPS (lpj=31200)
+ [ 0.022693] pid_max: default: 4096 minimum: 301
+ [ 0.027352] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
+ [ 0.034428] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
+ [ 0.045099] rcu: Hierarchical SRCU implementation.
+ [ 0.050048] smp: Bringing up secondary CPUs ...
+ [ 0.055417] smp: Brought up 1 node, 2 CPUs
+ [ 0.059602] devtmpfs: initialized
+ [ 0.082796] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+ [ 0.091820] futex hash table entries: 16 (order: -2, 1024 bytes, linear)
+ [ 0.098507] pinctrl core: initialized pinctrl subsystem
+ [ 0.140938] clocksource: Switched to clocksource clint_clocksource
+ [ 0.247216] workingset: timestamp_bits=62 max_order=11 bucket_order=0
+ [ 0.277392] k210-fpioa 502b0000.pinmux: K210 FPIOA pin controller
+ [ 0.291724] k210-sysctl 50440000.syscon: K210 system controller
+ [ 0.305317] k210-rst 50440000.syscon:reset-controller: K210 reset controller
+ [ 0.313808] 38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1, base_baud = 115200) is a SiFive UART v0
+ [ 0.322712] printk: console [ttySIF0] enabled
+ [ 0.322712] printk: console [ttySIF0] enabled
+ [ 0.331328] printk: bootconsole [sifive0] disabled
+ [ 0.331328] printk: bootconsole [sifive0] disabled
+ [ 0.353347] Freeing unused kernel memory: 88K
+ [ 0.357004] This architecture does not have kernel memory protection.
+ [ 0.363397] Run /init as init process
+
+Loading, Booting, and Storing Images
+------------------------------------
+
+.. _loading:
+