i2c: Remove trailing whitespaces in busses/Kconfig

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d01d0b1..495c971 100644 (file)
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -135,7 +135,7 @@ config I2C_ELEKTOR
          This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
          such an adapter.
 
          This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
          such an adapter.
 

-         This support is also available as a module.  If so, the module 
+         This support is also available as a module.  If so, the module

          will be called i2c-elektor.
 
 config I2C_GPIO
          will be called i2c-elektor.
 
 config I2C_GPIO


@@ -190,7 +190,7 @@ config I2C_I810
        select I2C_ALGOBIT
        help
          If you say yes to this option, support will be included for the Intel
        select I2C_ALGOBIT
        help
          If you say yes to this option, support will be included for the Intel

-         810/815 family of mainboard I2C interfaces.  Specifically, the 
+         810/815 family of mainboard I2C interfaces.  Specifically, the

          following versions of the chipset are supported:
            i810AA
            i810AB
          following versions of the chipset are supported:
            i810AA
            i810AB


@@ -248,8 +248,8 @@ config I2C_IBM_IIC
        tristate "IBM PPC 4xx on-chip I2C interface"
        depends on 4xx
        help
        tristate "IBM PPC 4xx on-chip I2C interface"
        depends on 4xx
        help

-         Say Y here if you want to use IIC peripheral found on 
-         embedded IBM PPC 4xx based systems. 
+         Say Y here if you want to use IIC peripheral found on
+         embedded IBM PPC 4xx based systems.

 
          This driver can also be built as a module.  If so, the module
          will be called i2c-ibm_iic.
 
          This driver can also be built as a module.  If so, the module
          will be called i2c-ibm_iic.


@@ -269,7 +269,7 @@ config I2C_IXP2000
        depends on ARCH_IXP2000
        select I2C_ALGOBIT
        help
        depends on ARCH_IXP2000
        select I2C_ALGOBIT
        help

-         Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based 
+         Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based

          system and are using GPIO lines for an I2C bus.
 
          This support is also available as a module. If so, the module
          system and are using GPIO lines for an I2C bus.
 
          This support is also available as a module. If so, the module


@@ -354,7 +354,7 @@ config I2C_PARPORT
          on the parport driver.  This is meant for embedded systems. Don't say
          Y here if you intend to say Y or M there.
 
          on the parport driver.  This is meant for embedded systems. Don't say
          Y here if you intend to say Y or M there.
 

-         This support is also available as a module.  If so, the module 
+         This support is also available as a module.  If so, the module

          will be called i2c-parport.
 
 config I2C_PARPORT_LIGHT
          will be called i2c-parport.
 
 config I2C_PARPORT_LIGHT


@@ -372,12 +372,12 @@ config I2C_PARPORT_LIGHT
          the clean but heavy parport handling is not an option.  The
          drawback is a reduced portability and the impossibility to
          daisy-chain other parallel port devices.
          the clean but heavy parport handling is not an option.  The
          drawback is a reduced portability and the impossibility to
          daisy-chain other parallel port devices.

-         
+

          Don't say Y here if you said Y or M to i2c-parport.  Saying M to
          both is possible but both modules should not be loaded at the same
          time.
 
          Don't say Y here if you said Y or M to i2c-parport.  Saying M to
          both is possible but both modules should not be loaded at the same
          time.
 

-         This support is also available as a module.  If so, the module 
+         This support is also available as a module.  If so, the module

          will be called i2c-parport-light.
 
 config I2C_PASEMI
          will be called i2c-parport-light.
 
 config I2C_PASEMI


@@ -401,7 +401,7 @@ config I2C_PROSAVAGE
 
          This driver is deprecated in favor of the savagefb driver.
 
 
          This driver is deprecated in favor of the savagefb driver.
 

-         This support is also available as a module.  If so, the module 
+         This support is also available as a module.  If so, the module

          will be called i2c-prosavage.
 
 config I2C_S3C2410
          will be called i2c-prosavage.
 
 config I2C_S3C2410


@@ -417,7 +417,7 @@ config I2C_SAVAGE4
        depends on PCI
        select I2C_ALGOBIT
        help
        depends on PCI
        select I2C_ALGOBIT
        help

-         If you say yes to this option, support will be included for the 
+         If you say yes to this option, support will be included for the

          S3 Savage 4 I2C interface.
 
          This driver is deprecated in favor of the savagefb driver.
          S3 Savage 4 I2C interface.
 
          This driver is deprecated in favor of the savagefb driver.


@@ -452,7 +452,7 @@ config SCx200_I2C
 
          If you don't know what to do here, say N.
 
 
          If you don't know what to do here, say N.
 

-         This support is also available as a module.  If so, the module 
+         This support is also available as a module.  If so, the module

          will be called scx200_i2c.
 
          This driver is deprecated and will be dropped soon. Use i2c-gpio
          will be called scx200_i2c.
 
          This driver is deprecated and will be dropped soon. Use i2c-gpio


@@ -483,14 +483,14 @@ config SCx200_ACB
 
          If you don't know what to do here, say N.
 
 
          If you don't know what to do here, say N.
 

-         This support is also available as a module.  If so, the module 
+         This support is also available as a module.  If so, the module

          will be called scx200_acb.
 
 config I2C_SIS5595
        tristate "SiS 5595"
        depends on PCI
        help
          will be called scx200_acb.
 
 config I2C_SIS5595
        tristate "SiS 5595"
        depends on PCI
        help

-         If you say yes to this option, support will be included for the 
+         If you say yes to this option, support will be included for the

          SiS5595 SMBus (a subset of I2C) interface.
 
          This driver can also be built as a module.  If so, the module
          SiS5595 SMBus (a subset of I2C) interface.
 
          This driver can also be built as a module.  If so, the module


@@ -500,7 +500,7 @@ config I2C_SIS630
        tristate "SiS 630/730"
        depends on PCI
        help
        tristate "SiS 630/730"
        depends on PCI
        help

-         If you say yes to this option, support will be included for the 
+         If you say yes to this option, support will be included for the

          SiS630 and SiS730 SMBus (a subset of I2C) interface.
 
          This driver can also be built as a module.  If so, the module
          SiS630 and SiS730 SMBus (a subset of I2C) interface.
 
          This driver can also be built as a module.  If so, the module


@@ -634,7 +634,7 @@ config I2C_PCA_ISA
        help
          This driver supports ISA boards using the Philips PCA9564
          parallel bus to I2C bus controller.
        help
          This driver supports ISA boards using the Philips PCA9564
          parallel bus to I2C bus controller.

-         
+

          This driver can also be built as a module.  If so, the module
          will be called i2c-pca-isa.
 
          This driver can also be built as a module.  If so, the module
          will be called i2c-pca-isa.