arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
authorJagan Teki <jagan@amarulasolutions.com>
Fri, 24 Feb 2017 10:02:54 +0000 (15:32 +0530)
committerStefano Babic <sbabic@denx.de>
Fri, 17 Mar 2017 08:27:08 +0000 (09:27 +0100)
commite9dfa1e1e521218fc893cea6731f482cfd2193d4
tree3f424a881628c5a166ab80ba6e40c341de679e24
parent85392deda184a57e8b61c1e524288bed3f81d400
arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support

Boot from MMC:
-------------
U-Boot SPL 2017.01-rc2-gba3c151-dirty (Jan 02 2017 - 16:59:33)
Trying to boot from MMC1

U-Boot 2017.01-rc2-gba3c151-dirty (Jan 02 2017 - 16:59:33 +0100)

CPU:   Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 33C
Reset cause: POR
Model: Engicam Is.IoT MX6UL Starterkit
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
isiotmx6ul>

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
arch/arm/cpu/armv7/mx6/Kconfig
arch/arm/dts/Makefile
arch/arm/dts/imx6ul-isiot-mmc.dts [new file with mode: 0644]
arch/arm/dts/imx6ul-isiot.dtsi [new file with mode: 0644]
board/engicam/isiotmx6ul/Kconfig [new file with mode: 0644]
board/engicam/isiotmx6ul/MAINTAINERS [new file with mode: 0644]
board/engicam/isiotmx6ul/Makefile [new file with mode: 0644]
board/engicam/isiotmx6ul/README [new file with mode: 0644]
board/engicam/isiotmx6ul/isiotmx6ul.c [new file with mode: 0644]
configs/imx6ul_isiot_mmc_defconfig [new file with mode: 0644]
include/configs/imx6ul_isiot.h [new file with mode: 0644]