2 * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
3 * remains copyright by the original authors
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h> /* ARRAY_SIZE */
28 #include <linux/version.h>
29 #include <linux/module.h>
30 #include <linux/jiffies.h>
31 #include <linux/timer.h>
32 #include <linux/sched.h>
34 #include <linux/delay.h>
35 #include <linux/wireless.h>
37 #include "rtl819x_HT.h"
38 #include "rtl819x_BA.h"
39 #include "rtl819x_TS.h"
42 #ifndef IW_MODE_MONITOR
43 #define IW_MODE_MONITOR 6
47 #define IWEVCUSTOM 0x8c02
53 * container_of - cast a member of a structure out to the containing structure
55 * @ptr: the pointer to the member.
56 * @type: the type of the container struct this is embedded in.
57 * @member: the name of the member within the struct.
60 #define container_of(ptr, type, member) ({ \
61 const typeof( ((type *)0)->member ) *__mptr = (ptr); \
62 (type *)( (char *)__mptr - offsetof(type,member) );})
65 #define KEY_TYPE_NA 0x0
66 #define KEY_TYPE_WEP40 0x1
67 #define KEY_TYPE_TKIP 0x2
68 #define KEY_TYPE_CCMP 0x4
69 #define KEY_TYPE_WEP104 0x5
71 /* added for rtl819x tx procedure */
72 #define MAX_QUEUE_SIZE 0x10
85 #define BEACON_QUEUE 8
87 #define LOW_QUEUE BE_QUEUE
88 #define NORMAL_QUEUE MGNT_QUEUE
91 #define SWRF_TIMEOUT 50
93 //added by amy for LEAP related
94 #define IE_CISCO_FLAG_POSITION 0x08 // Flag byte: byte 8, numbered from 0.
95 #define SUPPORT_CKIP_MIC 0x08 // bit3
96 #define SUPPORT_CKIP_PK 0x10 // bit4
97 /* defined for skb cb field */
99 typedef struct cb_desc {
100 /* Tx Desc Related flags (8-9) */
106 u8 bTxDisableRateFallBack:1;
107 u8 bTxUseDriverAssingedRate:1;
108 u8 bHwSec:1; //indicate whether use Hw security. WB
112 /* Tx Firmware Relaged flags (10-11)*/
116 u8 bUseShortPreamble:1;
117 u8 bTxEnableFwCalcDur:1;
124 u8 bRTSUseShortPreamble:1;
132 /* Tx Desc related element(12-19) */
144 /* Tx firmware related element(20-27) */
157 /*--------------------------Define -------------------------------------------*/
160 #define MGN_5_5M 0x0b
172 #define MGN_MCS0 0x80
173 #define MGN_MCS1 0x81
174 #define MGN_MCS2 0x82
175 #define MGN_MCS3 0x83
176 #define MGN_MCS4 0x84
177 #define MGN_MCS5 0x85
178 #define MGN_MCS6 0x86
179 #define MGN_MCS7 0x87
180 #define MGN_MCS8 0x88
181 #define MGN_MCS9 0x89
182 #define MGN_MCS10 0x8a
183 #define MGN_MCS11 0x8b
184 #define MGN_MCS12 0x8c
185 #define MGN_MCS13 0x8d
186 #define MGN_MCS14 0x8e
187 #define MGN_MCS15 0x8f
189 //----------------------------------------------------------------------------
190 // 802.11 Management frame Reason Code field
191 //----------------------------------------------------------------------------
194 auth_not_valid = 0x2,
207 // Reason code defined in 802.11i D10.0 p.28.
209 four_way_tmout = 0x0f,
210 two_way_tmout = 0x10,
212 invalid_Gcipher = 0x12,
213 invalid_Pcipher = 0x13,
215 unsup_RSNIEver = 0x15,
216 invalid_RSNIE = 0x16,
217 auth_802_1x_fail= 0x17,
220 // Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
221 QoS_unspec = 0x20, // 32
222 QAP_bandwidth = 0x21, // 33
223 poor_condition = 0x22, // 34
224 no_facility = 0x23, // 35
226 req_declined = 0x25, // 37
227 invalid_param = 0x26, // 38
228 req_not_honored= 0x27, // 39
229 TS_not_created = 0x2F, // 47
230 DL_not_allowed = 0x30, // 48
231 dest_not_exist = 0x31, // 49
232 dest_not_QSTA = 0x32, // 50
237 #define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10
239 #define MGMT_QUEUE_NUM 5
241 #define IEEE_CMD_SET_WPA_PARAM 1
242 #define IEEE_CMD_SET_WPA_IE 2
243 #define IEEE_CMD_SET_ENCRYPTION 3
244 #define IEEE_CMD_MLME 4
246 #define IEEE_PARAM_WPA_ENABLED 1
247 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2
248 #define IEEE_PARAM_DROP_UNENCRYPTED 3
249 #define IEEE_PARAM_PRIVACY_INVOKED 4
250 #define IEEE_PARAM_AUTH_ALGS 5
251 #define IEEE_PARAM_IEEE_802_1X 6
252 //It should consistent with the driver_XXX.c
254 #define IEEE_PARAM_WPAX_SELECT 7
255 //Added for notify the encryption type selection
257 #define IEEE_PROTO_WPA 1
258 #define IEEE_PROTO_RSN 2
259 //Added for notify the encryption type selection
261 #define IEEE_WPAX_USEGROUP 0
262 #define IEEE_WPAX_WEP40 1
263 #define IEEE_WPAX_TKIP 2
264 #define IEEE_WPAX_WRAP 3
265 #define IEEE_WPAX_CCMP 4
266 #define IEEE_WPAX_WEP104 5
268 #define IEEE_KEY_MGMT_IEEE8021X 1
269 #define IEEE_KEY_MGMT_PSK 2
271 #define IEEE_MLME_STA_DEAUTH 1
272 #define IEEE_MLME_STA_DISASSOC 2
275 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
276 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
277 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
278 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
279 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
280 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
283 #define IEEE_CRYPT_ALG_NAME_LEN 16
285 #define MAX_IE_LEN 0xff
287 // added for kernel conflict
288 #define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl
289 #define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl
290 #define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl
291 #define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rsl
292 #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
293 #define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rsl
295 #define ieee80211_ccmp_null ieee80211_ccmp_null_rsl
297 #define ieee80211_tkip_null ieee80211_tkip_null_rsl
299 #define ieee80211_wep_null ieee80211_wep_null_rsl
301 #define free_ieee80211 free_ieee80211_rsl
302 #define alloc_ieee80211 alloc_ieee80211_rsl
304 #define ieee80211_rx ieee80211_rx_rsl
305 #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl
307 #define ieee80211_get_beacon ieee80211_get_beacon_rsl
308 #define ieee80211_wake_queue ieee80211_wake_queue_rsl
309 #define ieee80211_stop_queue ieee80211_stop_queue_rsl
310 #define ieee80211_reset_queue ieee80211_reset_queue_rsl
311 #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl
312 #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
313 #define ieee80211_is_shortslot ieee80211_is_shortslot_rsl
314 #define ieee80211_is_54g ieee80211_is_54g_rsl
315 #define ieee80211_wpa_supplicant_ioctl ieee80211_wpa_supplicant_ioctl_rsl
316 #define ieee80211_ps_tx_ack ieee80211_ps_tx_ack_rsl
317 #define ieee80211_softmac_xmit ieee80211_softmac_xmit_rsl
318 #define ieee80211_stop_send_beacons ieee80211_stop_send_beacons_rsl
319 #define notify_wx_assoc_event notify_wx_assoc_event_rsl
320 #define SendDisassociation SendDisassociation_rsl
321 #define ieee80211_disassociate ieee80211_disassociate_rsl
322 #define ieee80211_start_send_beacons ieee80211_start_send_beacons_rsl
323 #define ieee80211_stop_scan ieee80211_stop_scan_rsl
324 #define ieee80211_send_probe_requests ieee80211_send_probe_requests_rsl
325 #define ieee80211_softmac_scan_syncro ieee80211_softmac_scan_syncro_rsl
326 #define ieee80211_start_scan_syncro ieee80211_start_scan_syncro_rsl
328 #define ieee80211_wx_get_essid ieee80211_wx_get_essid_rsl
329 #define ieee80211_wx_set_essid ieee80211_wx_set_essid_rsl
330 #define ieee80211_wx_set_rate ieee80211_wx_set_rate_rsl
331 #define ieee80211_wx_get_rate ieee80211_wx_get_rate_rsl
332 #define ieee80211_wx_set_wap ieee80211_wx_set_wap_rsl
333 #define ieee80211_wx_get_wap ieee80211_wx_get_wap_rsl
334 #define ieee80211_wx_set_mode ieee80211_wx_set_mode_rsl
335 #define ieee80211_wx_get_mode ieee80211_wx_get_mode_rsl
336 #define ieee80211_wx_set_scan ieee80211_wx_set_scan_rsl
337 #define ieee80211_wx_get_freq ieee80211_wx_get_freq_rsl
338 #define ieee80211_wx_set_freq ieee80211_wx_set_freq_rsl
339 #define ieee80211_wx_set_rawtx ieee80211_wx_set_rawtx_rsl
340 #define ieee80211_wx_get_name ieee80211_wx_get_name_rsl
341 #define ieee80211_wx_set_power ieee80211_wx_set_power_rsl
342 #define ieee80211_wx_get_power ieee80211_wx_get_power_rsl
343 #define ieee80211_wlan_frequencies ieee80211_wlan_frequencies_rsl
344 #define ieee80211_wx_set_rts ieee80211_wx_set_rts_rsl
345 #define ieee80211_wx_get_rts ieee80211_wx_get_rts_rsl
347 #define ieee80211_txb_free ieee80211_txb_free_rsl
349 #define ieee80211_wx_set_gen_ie ieee80211_wx_set_gen_ie_rsl
350 #define ieee80211_wx_get_scan ieee80211_wx_get_scan_rsl
351 #define ieee80211_wx_set_encode ieee80211_wx_set_encode_rsl
352 #define ieee80211_wx_get_encode ieee80211_wx_get_encode_rsl
353 #if WIRELESS_EXT >= 18
354 #define ieee80211_wx_set_mlme ieee80211_wx_set_mlme_rsl
355 #define ieee80211_wx_set_auth ieee80211_wx_set_auth_rsl
356 #define ieee80211_wx_set_encode_ext ieee80211_wx_set_encode_ext_rsl
357 #define ieee80211_wx_get_encode_ext ieee80211_wx_get_encode_ext_rsl
361 typedef struct ieee_param {
363 u8 sta_addr[ETH_ALEN];
379 u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
383 u8 seq[8]; /* sequence counter (set: RX, get: TX) */
391 #if WIRELESS_EXT < 17
392 #define IW_QUAL_QUAL_INVALID 0x10
393 #define IW_QUAL_LEVEL_INVALID 0x20
394 #define IW_QUAL_NOISE_INVALID 0x40
395 #define IW_QUAL_QUAL_UPDATED 0x1
396 #define IW_QUAL_LEVEL_UPDATED 0x2
397 #define IW_QUAL_NOISE_UPDATED 0x4
401 // linux under 2.6.9 release may not support it, so modify it for common use
402 #define MSECS(t) msecs_to_jiffies(t)
403 #define msleep_interruptible_rsl msleep_interruptible
405 #define IEEE80211_DATA_LEN 2304
406 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
409 The figure in section 7.1.2 suggests a body size of up to 2312
410 bytes is allowed, which is a bit confusing, I suspect this
411 represents the 2304 bytes of real data, plus a possible 8 bytes of
412 WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
413 #define IEEE80211_1ADDR_LEN 10
414 #define IEEE80211_2ADDR_LEN 16
415 #define IEEE80211_3ADDR_LEN 24
416 #define IEEE80211_4ADDR_LEN 30
417 #define IEEE80211_FCS_LEN 4
418 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
419 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
420 #define IEEE80211_MGMT_HDR_LEN 24
421 #define IEEE80211_DATA_HDR3_LEN 24
422 #define IEEE80211_DATA_HDR4_LEN 30
424 #define MIN_FRAG_THRESHOLD 256U
425 #define MAX_FRAG_THRESHOLD 2346U
428 /* Frame control field constants */
429 #define IEEE80211_FCTL_VERS 0x0003
430 #define IEEE80211_FCTL_FTYPE 0x000c
431 #define IEEE80211_FCTL_STYPE 0x00f0
432 #define IEEE80211_FCTL_FRAMETYPE 0x00fc
433 #define IEEE80211_FCTL_TODS 0x0100
434 #define IEEE80211_FCTL_FROMDS 0x0200
435 #define IEEE80211_FCTL_DSTODS 0x0300 //added by david
436 #define IEEE80211_FCTL_MOREFRAGS 0x0400
437 #define IEEE80211_FCTL_RETRY 0x0800
438 #define IEEE80211_FCTL_PM 0x1000
439 #define IEEE80211_FCTL_MOREDATA 0x2000
440 #define IEEE80211_FCTL_WEP 0x4000
441 #define IEEE80211_FCTL_ORDER 0x8000
443 #define IEEE80211_FTYPE_MGMT 0x0000
444 #define IEEE80211_FTYPE_CTL 0x0004
445 #define IEEE80211_FTYPE_DATA 0x0008
448 #define IEEE80211_STYPE_ASSOC_REQ 0x0000
449 #define IEEE80211_STYPE_ASSOC_RESP 0x0010
450 #define IEEE80211_STYPE_REASSOC_REQ 0x0020
451 #define IEEE80211_STYPE_REASSOC_RESP 0x0030
452 #define IEEE80211_STYPE_PROBE_REQ 0x0040
453 #define IEEE80211_STYPE_PROBE_RESP 0x0050
454 #define IEEE80211_STYPE_BEACON 0x0080
455 #define IEEE80211_STYPE_ATIM 0x0090
456 #define IEEE80211_STYPE_DISASSOC 0x00A0
457 #define IEEE80211_STYPE_AUTH 0x00B0
458 #define IEEE80211_STYPE_DEAUTH 0x00C0
459 #define IEEE80211_STYPE_MANAGE_ACT 0x00D0
462 #define IEEE80211_STYPE_PSPOLL 0x00A0
463 #define IEEE80211_STYPE_RTS 0x00B0
464 #define IEEE80211_STYPE_CTS 0x00C0
465 #define IEEE80211_STYPE_ACK 0x00D0
466 #define IEEE80211_STYPE_CFEND 0x00E0
467 #define IEEE80211_STYPE_CFENDACK 0x00F0
468 #define IEEE80211_STYPE_BLOCKACK 0x0094
471 #define IEEE80211_STYPE_DATA 0x0000
472 #define IEEE80211_STYPE_DATA_CFACK 0x0010
473 #define IEEE80211_STYPE_DATA_CFPOLL 0x0020
474 #define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
475 #define IEEE80211_STYPE_NULLFUNC 0x0040
476 #define IEEE80211_STYPE_CFACK 0x0050
477 #define IEEE80211_STYPE_CFPOLL 0x0060
478 #define IEEE80211_STYPE_CFACKPOLL 0x0070
479 #define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2
480 #define IEEE80211_STYPE_QOS_NULL 0x00C0
482 #define IEEE80211_SCTL_FRAG 0x000F
483 #define IEEE80211_SCTL_SEQ 0xFFF0
486 #define IEEE80211_QCTL_TID 0x000F
488 #define FC_QOS_BIT BIT7
489 #define IsDataFrame(pdu) ( ((pdu[0] & 0x0C)==0x08) ? true : false )
490 #define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
491 //added by wb. Is this right?
492 #define IsQoSDataFrame(pframe) ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
493 #define Frame_Order(pframe) (*(u16*)pframe&IEEE80211_FCTL_ORDER)
494 #define SN_LESS(a, b) (((a-b)&0x800)!=0)
495 #define SN_EQUAL(a, b) (a == b)
496 #define MAX_DEV_ADDR_SIZE 8
497 typedef enum _ACT_CATEGORY{
503 } ACT_CATEGORY, *PACT_CATEGORY;
505 typedef enum _TS_ACTION{
510 } TS_ACTION, *PTS_ACTION;
512 typedef enum _BA_ACTION{
516 } BA_ACTION, *PBA_ACTION;
518 typedef enum _InitialGainOpType{
525 #define CONFIG_IEEE80211_DEBUG
526 #ifdef CONFIG_IEEE80211_DEBUG
527 extern u32 ieee80211_debug_level;
528 #define IEEE80211_DEBUG(level, fmt, args...) \
529 do { if (ieee80211_debug_level & (level)) \
530 printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
531 //wb added to debug out data buf
532 //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
533 #define IEEE80211_DEBUG_DATA(level, data, datalen) \
534 do{ if ((ieee80211_debug_level & (level)) == (level)) \
537 u8* pdata = (u8*) data; \
538 printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__); \
539 for(i=0; i<(int)(datalen); i++) \
541 printk("%2x ", pdata[i]); \
542 if ((i+1)%16 == 0) printk("\n"); \
548 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
549 #define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
550 #endif /* CONFIG_IEEE80211_DEBUG */
552 /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
555 * To use the debug system;
557 * If you are defining a new debug classification, simply add it to the #define
558 * list here in the form of:
560 * #define IEEE80211_DL_xxxx VALUE
562 * shifting value to the left one bit from the previous entry. xxxx should be
563 * the name of the classification (for example, WEP)
565 * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
566 * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
567 * to send output to that classification.
569 * To add your debug level to the list of levels seen when you perform
571 * % cat /proc/net/ipw/debug_level
573 * you simply need to add your entry to the ipw_debug_levels array.
575 * If you do not see debug_level in /proc/net/ipw then you do not have
576 * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
580 #define IEEE80211_DL_INFO (1<<0)
581 #define IEEE80211_DL_WX (1<<1)
582 #define IEEE80211_DL_SCAN (1<<2)
583 #define IEEE80211_DL_STATE (1<<3)
584 #define IEEE80211_DL_MGMT (1<<4)
585 #define IEEE80211_DL_FRAG (1<<5)
586 #define IEEE80211_DL_EAP (1<<6)
587 #define IEEE80211_DL_DROP (1<<7)
589 #define IEEE80211_DL_TX (1<<8)
590 #define IEEE80211_DL_RX (1<<9)
592 #define IEEE80211_DL_HT (1<<10) //HT
593 #define IEEE80211_DL_BA (1<<11) //ba
594 #define IEEE80211_DL_TS (1<<12) //TS
595 #define IEEE80211_DL_QOS (1<<13)
596 #define IEEE80211_DL_REORDER (1<<14)
597 #define IEEE80211_DL_IOT (1<<15)
598 #define IEEE80211_DL_IPS (1<<16)
599 #define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
600 #define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
601 #define IEEE80211_DL_ERR (1<<31) //always open
602 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
603 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
604 #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
606 #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
607 #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
608 #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
609 #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
610 #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
611 #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
612 #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
613 #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
614 #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
615 #define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
617 #ifdef CONFIG_IEEE80211_DEBUG
618 /* Added by Annie, 2005-11-22. */
619 #define MAX_STR_LEN 64
620 /* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
621 #define PRINTABLE(_ch) (_ch>'!' && _ch<'~')
622 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \
623 if((_Comp) & level) \
626 u8 buffer[MAX_STR_LEN]; \
627 int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
628 memset(buffer, 0, MAX_STR_LEN); \
629 memcpy(buffer, (u8 *)_Ptr, length ); \
630 for( __i=0; __i<MAX_STR_LEN; __i++ ) \
632 if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
634 buffer[length] = '\0'; \
635 printk("Rtl819x: "); \
636 printk(_TitleString); \
637 printk(": %d, <%s>\n", _Len, buffer); \
640 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) do {} while (0)
643 #include <linux/netdevice.h>
644 #include <linux/if_arp.h> /* ARPHRD_ETHER */
647 #define WIRELESS_SPY // enable iwspy support
649 #include <net/iw_handler.h> // new driver API
652 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
653 #endif /* ETH_P_PAE */
655 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
657 #ifndef ETH_P_80211_RAW
658 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
661 /* IEEE 802.11 defines */
663 #define P80211_OUI_LEN 3
665 struct ieee80211_snap_hdr {
667 u8 dsap; /* always 0xAA */
668 u8 ssap; /* always 0xAA */
669 u8 ctrl; /* always 0x03 */
670 u8 oui[P80211_OUI_LEN]; /* organizational universal id */
672 } __attribute__ ((packed));
674 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
676 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
677 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
678 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
680 #define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
681 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
682 #define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
684 /* Authentication algorithms */
685 #define WLAN_AUTH_OPEN 0
686 #define WLAN_AUTH_SHARED_KEY 1
687 #define WLAN_AUTH_LEAP 2
689 #define WLAN_AUTH_CHALLENGE_LEN 128
691 #define WLAN_CAPABILITY_BSS (1<<0)
692 #define WLAN_CAPABILITY_IBSS (1<<1)
693 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
694 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
695 #define WLAN_CAPABILITY_PRIVACY (1<<4)
696 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
697 #define WLAN_CAPABILITY_PBCC (1<<6)
698 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
699 #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
700 #define WLAN_CAPABILITY_QOS (1<<9)
701 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
702 #define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
704 /* 802.11g ERP information element */
705 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
706 #define WLAN_ERP_USE_PROTECTION (1<<1)
707 #define WLAN_ERP_BARKER_PREAMBLE (1<<2)
710 enum ieee80211_statuscode {
711 WLAN_STATUS_SUCCESS = 0,
712 WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
713 WLAN_STATUS_CAPS_UNSUPPORTED = 10,
714 WLAN_STATUS_REASSOC_NO_ASSOC = 11,
715 WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
716 WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
717 WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
718 WLAN_STATUS_CHALLENGE_FAIL = 15,
719 WLAN_STATUS_AUTH_TIMEOUT = 16,
720 WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
721 WLAN_STATUS_ASSOC_DENIED_RATES = 18,
723 WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
724 WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
725 WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
727 WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
728 WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
729 WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
731 WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
732 WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
734 WLAN_STATUS_INVALID_IE = 40,
735 WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
736 WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
737 WLAN_STATUS_INVALID_AKMP = 43,
738 WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
739 WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
740 WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
744 enum ieee80211_reasoncode {
745 WLAN_REASON_UNSPECIFIED = 1,
746 WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
747 WLAN_REASON_DEAUTH_LEAVING = 3,
748 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
749 WLAN_REASON_DISASSOC_AP_BUSY = 5,
750 WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
751 WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
752 WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
753 WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
755 WLAN_REASON_DISASSOC_BAD_POWER = 10,
756 WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
758 WLAN_REASON_INVALID_IE = 13,
759 WLAN_REASON_MIC_FAILURE = 14,
760 WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
761 WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
762 WLAN_REASON_IE_DIFFERENT = 17,
763 WLAN_REASON_INVALID_GROUP_CIPHER = 18,
764 WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
765 WLAN_REASON_INVALID_AKMP = 20,
766 WLAN_REASON_UNSUPP_RSN_VERSION = 21,
767 WLAN_REASON_INVALID_RSN_IE_CAP = 22,
768 WLAN_REASON_IEEE8021X_FAILED = 23,
769 WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
772 #define IEEE80211_STATMASK_SIGNAL (1<<0)
773 #define IEEE80211_STATMASK_RSSI (1<<1)
774 #define IEEE80211_STATMASK_NOISE (1<<2)
775 #define IEEE80211_STATMASK_RATE (1<<3)
776 #define IEEE80211_STATMASK_WEMASK 0x7
778 #define IEEE80211_CCK_MODULATION (1<<0)
779 #define IEEE80211_OFDM_MODULATION (1<<1)
781 #define IEEE80211_24GHZ_BAND (1<<0)
782 #define IEEE80211_52GHZ_BAND (1<<1)
784 #define IEEE80211_CCK_RATE_LEN 4
785 #define IEEE80211_CCK_RATE_1MB 0x02
786 #define IEEE80211_CCK_RATE_2MB 0x04
787 #define IEEE80211_CCK_RATE_5MB 0x0B
788 #define IEEE80211_CCK_RATE_11MB 0x16
789 #define IEEE80211_OFDM_RATE_LEN 8
790 #define IEEE80211_OFDM_RATE_6MB 0x0C
791 #define IEEE80211_OFDM_RATE_9MB 0x12
792 #define IEEE80211_OFDM_RATE_12MB 0x18
793 #define IEEE80211_OFDM_RATE_18MB 0x24
794 #define IEEE80211_OFDM_RATE_24MB 0x30
795 #define IEEE80211_OFDM_RATE_36MB 0x48
796 #define IEEE80211_OFDM_RATE_48MB 0x60
797 #define IEEE80211_OFDM_RATE_54MB 0x6C
798 #define IEEE80211_BASIC_RATE_MASK 0x80
800 #define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
801 #define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
802 #define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
803 #define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
804 #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
805 #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
806 #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
807 #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
808 #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
809 #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
810 #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
811 #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
813 #define IEEE80211_CCK_RATES_MASK 0x0000000F
814 #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
815 IEEE80211_CCK_RATE_2MB_MASK)
816 #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
817 IEEE80211_CCK_RATE_5MB_MASK | \
818 IEEE80211_CCK_RATE_11MB_MASK)
820 #define IEEE80211_OFDM_RATES_MASK 0x00000FF0
821 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
822 IEEE80211_OFDM_RATE_12MB_MASK | \
823 IEEE80211_OFDM_RATE_24MB_MASK)
824 #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
825 IEEE80211_OFDM_RATE_9MB_MASK | \
826 IEEE80211_OFDM_RATE_18MB_MASK | \
827 IEEE80211_OFDM_RATE_36MB_MASK | \
828 IEEE80211_OFDM_RATE_48MB_MASK | \
829 IEEE80211_OFDM_RATE_54MB_MASK)
830 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
831 IEEE80211_CCK_DEFAULT_RATES_MASK)
833 #define IEEE80211_NUM_OFDM_RATES 8
834 #define IEEE80211_NUM_CCK_RATES 4
835 #define IEEE80211_OFDM_SHIFT_MASK_A 4
838 /* this is stolen and modified from the madwifi driver*/
839 #define IEEE80211_FC0_TYPE_MASK 0x0c
840 #define IEEE80211_FC0_TYPE_DATA 0x08
841 #define IEEE80211_FC0_SUBTYPE_MASK 0xB0
842 #define IEEE80211_FC0_SUBTYPE_QOS 0x80
844 #define IEEE80211_QOS_HAS_SEQ(fc) \
845 (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
846 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
848 /* this is stolen from ipw2200 driver */
849 #define IEEE_IBSS_MAC_HASH_SIZE 31
850 struct ieee_ibss_seq {
854 unsigned long packet_time[17];
855 struct list_head list;
858 /* NOTE: This data is for statistical purposes; not all hardware provides this
859 * information for frames received. Not setting these will not cause
860 * any adverse affects. */
861 struct ieee80211_rx_stats {
866 u16 rate; /* in 100 kbps */
876 // u8 DataRate; // In 0.5 Mbps
877 u8 SignalQuality; // in 0-100 index.
878 s32 RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
879 s8 RxPower; // in dBm Translate from PWdB
880 u8 SignalStrength; // in 0-100 index.
884 u16 bShortPreamble:1;
885 u16 Antenna:1; //for rtl8185
886 u16 Decrypted:1; //for rtl8185, rtl8187
887 u16 Wakeup:1; //for rtl8185
888 u16 Reserved0:1; //for rtl8185
893 bool bIsQosData; // Added by Annie, 2005-12-22.
896 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
897 //1Attention Please!!!<11n or 8190 specific code should be put below this line>
898 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
905 bool RxIs40MHzPacket;
907 u8 RxMIMOSignalStrength[4]; // in 0~100 index
908 s8 RxMIMOSignalQuality[2];
909 bool bPacketMatchBSSID;
914 u16 packetlength; // Total packet length: Must equal to sum of all FragLength
915 u16 fraglength; // FragLength should equal to PacketLength in non-fragment case
916 u16 fragoffset; // Data offset for this fragment
918 bool bisrxaggrsubframe;
919 bool bPacketBeacon; //cosa add for rssi
920 bool bToSelfBA; //cosa add for rssi
921 char cck_adc_pwdb[4]; //cosa add for rx path selection
926 /* IEEE 802.11 requires that STA supports concurrent reception of at least
927 * three fragmented frames. This define can be increased to support more
928 * concurrent frames, but it should be noted that each entry can consume about
929 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
930 #define IEEE80211_FRAG_CACHE_LEN 4
932 struct ieee80211_frag_entry {
933 unsigned long first_frag_time;
935 unsigned int last_frag;
937 u8 src_addr[ETH_ALEN];
938 u8 dst_addr[ETH_ALEN];
941 struct ieee80211_stats {
942 unsigned int tx_unicast_frames;
943 unsigned int tx_multicast_frames;
944 unsigned int tx_fragments;
945 unsigned int tx_unicast_octets;
946 unsigned int tx_multicast_octets;
947 unsigned int tx_deferred_transmissions;
948 unsigned int tx_single_retry_frames;
949 unsigned int tx_multiple_retry_frames;
950 unsigned int tx_retry_limit_exceeded;
951 unsigned int tx_discards;
952 unsigned int rx_unicast_frames;
953 unsigned int rx_multicast_frames;
954 unsigned int rx_fragments;
955 unsigned int rx_unicast_octets;
956 unsigned int rx_multicast_octets;
957 unsigned int rx_fcs_errors;
958 unsigned int rx_discards_no_buffer;
959 unsigned int tx_discards_wrong_sa;
960 unsigned int rx_discards_undecryptable;
961 unsigned int rx_message_in_msg_fragments;
962 unsigned int rx_message_in_bad_msg_fragments;
965 struct ieee80211_device;
967 #include "ieee80211_crypt.h"
969 #define SEC_KEY_1 (1<<0)
970 #define SEC_KEY_2 (1<<1)
971 #define SEC_KEY_3 (1<<2)
972 #define SEC_KEY_4 (1<<3)
973 #define SEC_ACTIVE_KEY (1<<4)
974 #define SEC_AUTH_MODE (1<<5)
975 #define SEC_UNICAST_GROUP (1<<6)
976 #define SEC_LEVEL (1<<7)
977 #define SEC_ENABLED (1<<8)
978 #define SEC_ENCRYPT (1<<9)
980 #define SEC_LEVEL_0 0 /* None */
981 #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
982 #define SEC_LEVEL_2 2 /* Level 1 + TKIP */
983 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
984 #define SEC_LEVEL_3 4 /* Level 2 + CCMP */
986 #define SEC_ALG_NONE 0
987 #define SEC_ALG_WEP 1
988 #define SEC_ALG_TKIP 2
989 #define SEC_ALG_CCMP 3
992 #define WEP_KEY_LEN 13
993 #define SCM_KEY_LEN 32
994 #define SCM_TEMPORAL_KEY_LENGTH 16
996 struct ieee80211_security {
1001 unicast_uses_group:1,
1003 u8 key_sizes[WEP_KEYS];
1004 u8 keys[WEP_KEYS][SCM_KEY_LEN];
1007 } __attribute__ ((packed));
1011 802.11 data frame from AP
1012 ,-------------------------------------------------------------------.
1013 Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
1014 |------|------|---------|---------|---------|------|---------|------|
1015 Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
1016 | | tion | (BSSID) | | | ence | data | |
1017 `-------------------------------------------------------------------'
1018 Total: 28-2340 bytes
1021 /* Management Frame Information Element Types */
1022 enum ieee80211_mfie {
1024 MFIE_TYPE_RATES = 1,
1025 MFIE_TYPE_FH_SET = 2,
1026 MFIE_TYPE_DS_SET = 3,
1027 MFIE_TYPE_CF_SET = 4,
1029 MFIE_TYPE_IBSS_SET = 6,
1030 MFIE_TYPE_COUNTRY = 7,
1031 MFIE_TYPE_HOP_PARAMS = 8,
1032 MFIE_TYPE_HOP_TABLE = 9,
1033 MFIE_TYPE_REQUEST = 10,
1034 MFIE_TYPE_CHALLENGE = 16,
1035 MFIE_TYPE_POWER_CONSTRAINT = 32,
1036 MFIE_TYPE_POWER_CAPABILITY = 33,
1037 MFIE_TYPE_TPC_REQUEST = 34,
1038 MFIE_TYPE_TPC_REPORT = 35,
1039 MFIE_TYPE_SUPP_CHANNELS = 36,
1041 MFIE_TYPE_MEASURE_REQUEST = 38,
1042 MFIE_TYPE_MEASURE_REPORT = 39,
1043 MFIE_TYPE_QUIET = 40,
1044 MFIE_TYPE_IBSS_DFS = 41,
1047 MFIE_TYPE_RATES_EX = 50,
1048 MFIE_TYPE_HT_CAP= 45,
1049 MFIE_TYPE_HT_INFO= 61,
1050 MFIE_TYPE_AIRONET=133,
1051 MFIE_TYPE_GENERIC = 221,
1052 MFIE_TYPE_QOS_PARAMETER = 222,
1055 /* Minimal header; can be used for passing 802.11 frames with sufficient
1056 * information to determine what type of underlying data type is actually
1057 * stored in the data. */
1058 struct ieee80211_hdr {
1062 } __attribute__ ((packed));
1064 struct ieee80211_hdr_1addr {
1069 } __attribute__ ((packed));
1071 struct ieee80211_hdr_2addr {
1077 } __attribute__ ((packed));
1079 struct ieee80211_hdr_3addr {
1087 } __attribute__ ((packed));
1089 struct ieee80211_hdr_4addr {
1098 } __attribute__ ((packed));
1100 struct ieee80211_hdr_3addrqos {
1109 } __attribute__ ((packed));
1111 struct ieee80211_hdr_4addrqos {
1121 } __attribute__ ((packed));
1123 struct ieee80211_info_element {
1127 } __attribute__ ((packed));
1129 struct ieee80211_authentication {
1130 struct ieee80211_hdr_3addr header;
1135 struct ieee80211_info_element info_element[0];
1136 } __attribute__ ((packed));
1138 struct ieee80211_disassoc {
1139 struct ieee80211_hdr_3addr header;
1141 } __attribute__ ((packed));
1143 struct ieee80211_probe_request {
1144 struct ieee80211_hdr_3addr header;
1145 /* SSID, supported rates */
1146 struct ieee80211_info_element info_element[0];
1147 } __attribute__ ((packed));
1149 struct ieee80211_probe_response {
1150 struct ieee80211_hdr_3addr header;
1152 __le16 beacon_interval;
1154 /* SSID, supported rates, FH params, DS params,
1155 * CF params, IBSS params, TIM (if beacon), RSN */
1156 struct ieee80211_info_element info_element[0];
1157 } __attribute__ ((packed));
1159 /* Alias beacon for probe_response */
1160 #define ieee80211_beacon ieee80211_probe_response
1162 struct ieee80211_assoc_request_frame {
1163 struct ieee80211_hdr_3addr header;
1165 __le16 listen_interval;
1166 /* SSID, supported rates, RSN */
1167 struct ieee80211_info_element info_element[0];
1168 } __attribute__ ((packed));
1170 struct ieee80211_reassoc_request_frame {
1171 struct ieee80211_hdr_3addr header;
1173 __le16 listen_interval;
1174 u8 current_ap[ETH_ALEN];
1175 /* SSID, supported rates, RSN */
1176 struct ieee80211_info_element info_element[0];
1177 } __attribute__ ((packed));
1179 struct ieee80211_assoc_response_frame {
1180 struct ieee80211_hdr_3addr header;
1184 struct ieee80211_info_element info_element[0]; /* supported rates */
1185 } __attribute__ ((packed));
1187 struct ieee80211_txb {
1194 __le16 payload_size;
1195 struct sk_buff *fragments[0];
1198 #define MAX_TX_AGG_COUNT 16
1199 struct ieee80211_drv_agg_txb {
1200 u8 nr_drv_agg_frames;
1201 struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
1202 }__attribute__((packed));
1204 #define MAX_SUBFRAME_COUNT 64
1205 struct ieee80211_rxb {
1207 struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
1210 }__attribute__((packed));
1212 typedef union _frameqos {
1222 }frameqos,*pframeqos;
1224 /* SWEEP TABLE ENTRIES NUMBER*/
1225 #define MAX_SWEEP_TAB_ENTRIES 42
1226 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
1227 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
1228 * only use 8, and then use extended rates for the remaining supported
1229 * rates. Other APs, however, stick all of their supported rates on the
1230 * main rates information element... */
1231 #define MAX_RATES_LENGTH ((u8)12)
1232 #define MAX_RATES_EX_LENGTH ((u8)16)
1233 #define MAX_NETWORK_COUNT 128
1235 #define MAX_CHANNEL_NUMBER 161
1236 #define IEEE80211_SOFTMAC_SCAN_TIME 100
1238 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
1240 #define CRC_LENGTH 4U
1242 #define MAX_WPA_IE_LEN 64
1244 #define NETWORK_EMPTY_ESSID (1<<0)
1245 #define NETWORK_HAS_OFDM (1<<1)
1246 #define NETWORK_HAS_CCK (1<<2)
1249 #define NETWORK_HAS_QOS_PARAMETERS (1<<3)
1250 #define NETWORK_HAS_QOS_INFORMATION (1<<4)
1251 #define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
1252 NETWORK_HAS_QOS_INFORMATION)
1254 #define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
1255 #define NETWORK_HAS_CSA (1<<6)
1256 #define NETWORK_HAS_QUIET (1<<7)
1257 #define NETWORK_HAS_IBSS_DFS (1<<8)
1258 #define NETWORK_HAS_TPC_REPORT (1<<9)
1260 #define NETWORK_HAS_ERP_VALUE (1<<10)
1262 #define QOS_QUEUE_NUM 4
1263 #define QOS_OUI_LEN 3
1264 #define QOS_OUI_TYPE 2
1265 #define QOS_ELEMENT_ID 221
1266 #define QOS_OUI_INFO_SUB_TYPE 0
1267 #define QOS_OUI_PARAM_SUB_TYPE 1
1268 #define QOS_VERSION_1 1
1269 #define QOS_AIFSN_MIN_VALUE 2
1270 struct ieee80211_qos_information_element {
1273 u8 qui[QOS_OUI_LEN];
1278 } __attribute__ ((packed));
1280 struct ieee80211_qos_ac_parameter {
1284 } __attribute__ ((packed));
1286 struct ieee80211_qos_parameter_info {
1287 struct ieee80211_qos_information_element info_element;
1289 struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
1290 } __attribute__ ((packed));
1292 struct ieee80211_qos_parameters {
1293 __le16 cw_min[QOS_QUEUE_NUM];
1294 __le16 cw_max[QOS_QUEUE_NUM];
1295 u8 aifs[QOS_QUEUE_NUM];
1296 u8 flag[QOS_QUEUE_NUM];
1297 __le16 tx_op_limit[QOS_QUEUE_NUM];
1298 } __attribute__ ((packed));
1300 struct ieee80211_qos_data {
1301 struct ieee80211_qos_parameters parameters;
1308 struct ieee80211_tim_parameters {
1311 } __attribute__ ((packed));
1314 struct ieee80211_wmm_ac_param {
1315 u8 ac_aci_acm_aifsn;
1316 u8 ac_ecwmin_ecwmax;
1320 struct ieee80211_wmm_ts_info {
1324 } __attribute__ ((packed));
1326 struct ieee80211_wmm_tspec_elem {
1327 struct ieee80211_wmm_ts_info ts_info;
1334 u32 serv_start_time;
1341 u16 surp_band_allow;
1343 }__attribute__((packed));
1349 EAPOL_ENCAP_ASF_ALERT
1352 static const char *eap_types[] = {
1353 [EAP_PACKET] = "EAP-Packet",
1354 [EAPOL_START] = "EAPOL-Start",
1355 [EAPOL_LOGOFF] = "EAPOL-Logoff",
1356 [EAPOL_KEY] = "EAPOL-Key",
1357 [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert"
1360 static inline const char *eap_get_type(int type)
1362 return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
1364 //added by amy for reorder
1365 static inline u8 Frame_QoSTID(u8* buf)
1367 struct ieee80211_hdr_3addr *hdr;
1369 hdr = (struct ieee80211_hdr_3addr *)buf;
1370 fc = le16_to_cpu(hdr->frame_ctl);
1371 return (u8)((frameqos*)(buf + (((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24)))->field.tid;
1374 //added by amy for reorder
1382 } __attribute__ ((packed));
1384 struct ieee80211_softmac_stats{
1385 unsigned int rx_ass_ok;
1386 unsigned int rx_ass_err;
1387 unsigned int rx_probe_rq;
1388 unsigned int tx_probe_rs;
1389 unsigned int tx_beacons;
1390 unsigned int rx_auth_rq;
1391 unsigned int rx_auth_rs_ok;
1392 unsigned int rx_auth_rs_err;
1393 unsigned int tx_auth_rq;
1394 unsigned int no_auth_rs;
1395 unsigned int no_ass_rs;
1396 unsigned int tx_ass_rq;
1397 unsigned int rx_ass_rq;
1398 unsigned int tx_probe_rq;
1399 unsigned int reassoc;
1400 unsigned int swtxstop;
1401 unsigned int swtxawake;
1402 unsigned char CurrentShowTxate;
1403 unsigned char last_packet_rate;
1404 unsigned int txretrycount;
1407 #define BEACON_PROBE_SSID_ID_POSITION 12
1409 struct ieee80211_info_element_hdr {
1412 } __attribute__ ((packed));
1415 * These are the data types that can make up management packets
1419 u16 beacon_interval;
1421 u8 current_ap[ETH_ALEN];
1422 u16 listen_interval;
1424 u16 association_id:14, reserved:2;
1425 } __attribute__ ((packed));
1431 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
1432 #define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
1434 enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
1435 #define MAX_SP_Len (WMM_all_frame << 4)
1436 #define IEEE80211_QOS_TID 0x0f
1437 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
1439 #define IEEE80211_DTIM_MBCAST 4
1440 #define IEEE80211_DTIM_UCAST 2
1441 #define IEEE80211_DTIM_VALID 1
1442 #define IEEE80211_DTIM_INVALID 0
1444 #define IEEE80211_PS_DISABLED 0
1445 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
1446 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
1448 //added by David for QoS 2006/6/30
1449 //#define WMM_Hang_8187
1450 #ifdef WMM_Hang_8187
1451 #undef WMM_Hang_8187
1454 #define WME_AC_BK 0x00
1455 #define WME_AC_BE 0x01
1456 #define WME_AC_VI 0x02
1457 #define WME_AC_VO 0x03
1458 #define WME_ACI_MASK 0x03
1459 #define WME_AIFSN_MASK 0x03
1460 #define WME_AC_PRAM_LEN 16
1462 #define MAX_RECEIVE_BUFFER_SIZE 9100
1464 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
1465 //#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
1466 #define UP2AC(up) ( \
1467 ((up) < 1) ? WME_AC_BE : \
1468 ((up) < 3) ? WME_AC_BK : \
1469 ((up) < 4) ? WME_AC_BE : \
1470 ((up) < 6) ? WME_AC_VI : \
1472 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
1473 #define AC2UP(_ac) ( \
1474 ((_ac) == WME_AC_VO) ? 6 : \
1475 ((_ac) == WME_AC_VI) ? 5 : \
1476 ((_ac) == WME_AC_BK) ? 1 : \
1479 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
1480 #define ETHERNET_HEADER_SIZE 14 /* length of two Ethernet address plus ether type*/
1482 struct ether_header {
1483 u8 ether_dhost[ETHER_ADDR_LEN];
1484 u8 ether_shost[ETHER_ADDR_LEN];
1486 } __attribute__((packed));
1488 #ifndef ETHERTYPE_PAE
1489 #define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
1491 #ifndef ETHERTYPE_IP
1492 #define ETHERTYPE_IP 0x0800 /* IP protocol */
1495 typedef struct _bss_ht{
1499 // HT related elements
1505 HT_SPEC_VER ht_spec_ver;
1506 //HT_CAPABILITY_ELE bdHTCapEle;
1507 //HT_INFORMATION_ELE bdHTInfoEle;
1510 bool long_slot_time;
1513 typedef enum _erp_t{
1514 ERP_NonERPpresent = 0x01,
1515 ERP_UseProtection = 0x02,
1516 ERP_BarkerPreambleMode = 0x04,
1520 struct ieee80211_network {
1521 /* These entries are used to identify a unique network */
1524 /* Ensure null-terminated for any debug msgs */
1525 u8 ssid[IW_ESSID_MAX_SIZE + 1];
1527 struct ieee80211_qos_data qos_data;
1529 //added by amy for LEAP
1530 bool bWithAironetIE;
1531 bool bCkipSupported;
1534 // CCXv4 S59, MBSSID.
1538 // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
1539 bool bWithCcxVerNum;
1541 /* These are network statistics */
1542 struct ieee80211_rx_stats stats;
1544 u8 rates[MAX_RATES_LENGTH];
1546 u8 rates_ex[MAX_RATES_EX_LENGTH];
1548 unsigned long last_scanned;
1553 u16 beacon_interval;
1554 u16 listen_interval;
1557 u8 wpa_ie[MAX_WPA_IE_LEN];
1559 u8 rsn_ie[MAX_WPA_IE_LEN];
1562 struct ieee80211_tim_parameters tim;
1565 u32 last_dtim_sta_time[2];
1569 struct ieee80211_wmm_ac_param wmm_param[4];
1572 u8 Turbo_Enable;//enable turbo mode, added by thomas
1574 #ifdef ENABLE_DOT11D
1576 u8 CountryIeBuf[MAX_IE_LEN];
1578 // HT Related, by amy, 2008.04.29
1580 // Add to handle broadcom AP management frame CCK rate.
1581 bool broadcom_cap_exist;
1582 bool ralink_cap_exist;
1583 bool atheros_cap_exist;
1584 bool cisco_cap_exist;
1585 bool unknown_cap_exist;
1587 bool berp_info_valid;
1588 bool buseprotection;
1589 //put at the end of the structure.
1590 struct list_head list;
1593 enum ieee80211_state {
1595 /* the card is not linked at all */
1596 IEEE80211_NOLINK = 0,
1598 /* IEEE80211_ASSOCIATING* are for BSS client mode
1599 * the driver shall not perform RX filtering unless
1600 * the state is LINKED.
1601 * The driver shall just check for the state LINKED and
1602 * defaults to NOLINK for ALL the other states (including
1606 /* the association procedure will start (wq scheduling)*/
1607 IEEE80211_ASSOCIATING,
1608 IEEE80211_ASSOCIATING_RETRY,
1610 /* the association procedure is sending AUTH request*/
1611 IEEE80211_ASSOCIATING_AUTHENTICATING,
1613 /* the association procedure has successfully authentcated
1614 * and is sending association request
1616 IEEE80211_ASSOCIATING_AUTHENTICATED,
1618 /* the link is ok. the card associated to a BSS or linked
1619 * to a ibss cell or acting as an AP and creating the bss
1623 /* same as LINKED, but the driver shall apply RX filter
1624 * rules as we are in NO_LINK mode. As the card is still
1625 * logically linked, but it is doing a syncro site survey
1626 * then it will be back to LINKED state.
1628 IEEE80211_LINKED_SCANNING,
1632 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1633 #define DEFAULT_FTS 2346
1635 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
1636 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1637 #define CFG_IEEE80211_RTS (1<<2)
1639 #define IEEE80211_24GHZ_MIN_CHANNEL 1
1640 #define IEEE80211_24GHZ_MAX_CHANNEL 14
1641 #define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1642 IEEE80211_24GHZ_MIN_CHANNEL + 1)
1644 #define IEEE80211_52GHZ_MIN_CHANNEL 34
1645 #define IEEE80211_52GHZ_MAX_CHANNEL 165
1646 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1647 IEEE80211_52GHZ_MIN_CHANNEL + 1)
1651 typedef struct tx_pending_t{
1653 struct ieee80211_txb *txb;
1656 typedef struct _bandwidth_autoswitch
1658 long threshold_20Mhzto40Mhz;
1659 long threshold_40Mhzto20Mhz;
1660 bool bforced_tx20Mhz;
1661 bool bautoswitch_enable;
1662 }bandwidth_autoswitch,*pbandwidth_autoswitch;
1665 //added by amy for order
1667 #define REORDER_WIN_SIZE 128
1668 #define REORDER_ENTRY_NUM 128
1669 typedef struct _RX_REORDER_ENTRY
1671 struct list_head List;
1673 struct ieee80211_rxb* prxb;
1674 } RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
1675 //added by amy for order
1676 typedef enum _Fsync_State{
1682 // Power save mode configured.
1683 typedef enum _RT_PS_MODE
1685 eActive, // Active/Continuous access.
1686 eMaxPs, // Max power save mode.
1687 eFastPs // Fast power save mode.
1690 typedef enum _IPS_CALLBACK_FUNCION
1692 IPS_CALLBACK_NONE = 0,
1693 IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
1694 IPS_CALLBACK_JOIN_REQUEST = 2,
1695 }IPS_CALLBACK_FUNCION;
1697 typedef enum _RT_JOIN_ACTION{
1704 typedef struct _IbssParms{
1706 }IbssParms, *PIbssParms;
1707 #define MAX_NUM_RATES 264 // Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko.
1710 typedef enum _RT_RF_POWER_STATE
1717 typedef struct _RT_POWER_SAVE_CONTROL
1721 // Inactive Power Save(IPS) : Disable RF when disconnected
1724 bool bIPSModeBackup;
1725 bool bSwRfProcessing;
1726 RT_RF_POWER_STATE eInactivePowerState;
1727 struct work_struct InactivePsWorkItem;
1728 struct timer_list InactivePsTimer;
1730 // Return point for join action
1731 IPS_CALLBACK_FUNCION ReturnPoint;
1733 // Recored Parameters for rescheduled JoinRequest
1735 RT_JOIN_ACTION tmpJoinAction;
1736 struct ieee80211_network tmpBssDesc;
1738 // Recored Parameters for rescheduled MgntLinkRequest
1740 bool bTmpActiveScan;
1741 bool bTmpFilterHiddenAP;
1742 bool bTmpUpdateParms;
1744 OCTET_STRING tmpSsid2Scan;
1747 u8 tmpChannelNumber;
1751 OCTET_STRING tmpSuppRateSet;
1752 u8 tmpSuppRateBuf[MAX_NUM_RATES];
1758 // Leisre Poswer Save : Disable RF if connected but traffic is not busy
1762 }RT_POWER_SAVE_CONTROL,*PRT_POWER_SAVE_CONTROL;
1764 typedef u32 RT_RF_CHANGE_SOURCE;
1765 #define RF_CHANGE_BY_SW BIT31
1766 #define RF_CHANGE_BY_HW BIT30
1767 #define RF_CHANGE_BY_PS BIT29
1768 #define RF_CHANGE_BY_IPS BIT28
1769 #define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
1771 #ifdef ENABLE_DOT11D
1774 COUNTRY_CODE_FCC = 0,
1775 COUNTRY_CODE_IC = 1,
1776 COUNTRY_CODE_ETSI = 2,
1777 COUNTRY_CODE_SPAIN = 3,
1778 COUNTRY_CODE_FRANCE = 4,
1779 COUNTRY_CODE_MKK = 5,
1780 COUNTRY_CODE_MKK1 = 6,
1781 COUNTRY_CODE_ISRAEL = 7,
1784 COUNTRY_CODE_GLOBAL_DOMAIN
1785 }country_code_type_t;
1788 #define RT_MAX_LD_SLOT_NUM 10
1789 typedef struct _RT_LINK_DETECT_T{
1791 u32 NumRecvBcnInPeriod;
1792 u32 NumRecvDataInPeriod;
1794 u32 RxBcnNum[RT_MAX_LD_SLOT_NUM]; // number of Rx beacon / CheckForHang_period to determine link status
1795 u32 RxDataNum[RT_MAX_LD_SLOT_NUM]; // number of Rx data / CheckForHang_period to determine link status
1796 u16 SlotNum; // number of CheckForHang period to determine link status
1799 u32 NumTxOkInPeriod;
1800 u32 NumRxOkInPeriod;
1802 }RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
1805 struct ieee80211_device {
1806 struct net_device *dev;
1807 struct ieee80211_security sec;
1809 //hw security related
1810 // u8 hwsec_support; //support?
1811 u8 hwsec_active; //hw security active.
1812 bool is_silent_reset;
1815 bool bSupportRemoteWakeUp;
1816 RT_PS_MODE dot11PowerSaveMode; // Power save mode configured.
1819 RT_RF_POWER_STATE eRFPowerState;
1820 RT_RF_CHANGE_SOURCE RfOffReason;
1822 //11n spec related I wonder if These info structure need to be moved out of ieee80211_device
1825 PRT_HIGH_THROUGHPUT pHTInfo;
1826 //struct timer_list SwBwTimer;
1827 // spinlock_t chnlop_spinlock;
1828 spinlock_t bw_spinlock;
1830 spinlock_t reorder_spinlock;
1831 // for HT operation rate set. we use this one for HT data rate to seperate different descriptors
1832 //the way fill this is the same as in the IE
1833 u8 Regdot11HTOperationalRateSet[16]; //use RATR format
1834 u8 dot11HTOperationalRateSet[16]; //use RATR format
1835 u8 RegHTSuppRateSet[16];
1836 u8 HTCurrentOperaRate;
1837 u8 HTHighestOperaRate;
1838 //wb added for rate operation mode to firmware
1839 u8 bTxDisableRateFallBack;
1840 u8 bTxUseDriverAssingedRate;
1841 atomic_t atm_chnlop;
1843 // u8 HTHighestOperaRate;
1844 // u8 HTCurrentOperaRate;
1846 // 802.11e and WMM Traffic Stream Info (TX)
1847 struct list_head Tx_TS_Admit_List;
1848 struct list_head Tx_TS_Pending_List;
1849 struct list_head Tx_TS_Unused_List;
1850 TX_TS_RECORD TxTsRecord[TOTAL_TS_NUM];
1851 // 802.11e and WMM Traffic Stream Info (RX)
1852 struct list_head Rx_TS_Admit_List;
1853 struct list_head Rx_TS_Pending_List;
1854 struct list_head Rx_TS_Unused_List;
1855 RX_TS_RECORD RxTsRecord[TOTAL_TS_NUM];
1857 RX_REORDER_ENTRY RxReorderEntry[128];
1858 struct list_head RxReorder_Unused_List;
1860 // Qos related. Added by Annie, 2005-11-01.
1861 // PSTA_QOS pStaQos;
1862 u8 ForcedPriority; // Force per-packet priority 1~7. (default: 0, not to force it.)
1865 /* Bookkeeping structures */
1866 struct net_device_stats stats;
1867 struct ieee80211_stats ieee_stats;
1868 struct ieee80211_softmac_stats softmac_stats;
1870 /* Probe / Beacon management */
1871 struct list_head network_free_list;
1872 struct list_head network_list;
1873 struct ieee80211_network *networks;
1877 int iw_mode; /* operating mode (IW_MODE_*) */
1878 struct iw_spy_data spy_data;
1881 spinlock_t wpax_suitlist_lock;
1883 int tx_headroom; /* Set to size of any additional room needed at front
1884 * of allocated Tx SKBs */
1887 /* WEP and other encryption related settings at the device level */
1888 int open_wep; /* Set to 1 to allow unencrypted frames */
1890 int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
1891 * WEP key changes */
1893 /* If the host performs {en,de}cryption, then set to 1 */
1895 int host_encrypt_msdu;
1897 /* host performs multicast decryption */
1898 int host_mc_decrypt;
1900 /* host should strip IV and ICV from protected frames */
1901 /* meaningful only when hardware decryption is being used */
1902 int host_strip_iv_icv;
1906 int ieee802_1x; /* is IEEE 802.1X used */
1909 bool bHalfWirelessN24GMode;
1911 int drop_unencrypted;
1912 int tkip_countermeasures;
1913 int privacy_invoked;
1917 u16 pairwise_key_type;
1919 struct list_head crypt_deinit_list;
1920 struct ieee80211_crypt_data *crypt[WEP_KEYS];
1921 int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
1922 struct timer_list crypt_deinit_timer;
1925 int bcrx_sta_key; /* use individual keys to override default keys even
1926 * with RX of broad/multicast frames */
1928 /* Fragmentation structures */
1929 // each streaming contain a entry
1930 struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
1931 unsigned int frag_next_idx[17];
1932 u16 fts; /* Fragmentation Threshold */
1933 #define DEFAULT_RTS_THRESHOLD 2346U
1934 #define MIN_RTS_THRESHOLD 1
1935 #define MAX_RTS_THRESHOLD 2346U
1936 u16 rts; /* RTS threshold */
1938 /* Association info */
1941 /* This stores infos for the current network.
1942 * Either the network we are associated in INFRASTRUCTURE
1943 * or the network that we are creating in MASTER mode.
1944 * ad-hoc is a mixture ;-).
1945 * Note that in infrastructure mode, even when not associated,
1946 * fields bssid and essid may be valid (if wpa_set and essid_set
1947 * are true) as thy carry the value set by the user via iwconfig
1949 struct ieee80211_network current_network;
1951 enum ieee80211_state state;
1955 int mode; /* A, B, G */
1956 int modulation; /* CCK, OFDM */
1957 int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */
1958 int abg_true; /* ABG flag */
1960 /* used for forcing the ibss workqueue to terminate
1961 * without wait for the syncro scan to terminate
1963 short sync_scan_hurryup;
1968 u16 prev_seq_ctl; /* used to drop duplicate frames */
1970 /* map of allowed channels. 0 is dummy */
1971 // FIXME: remeber to default to a basic channel plan depending of the PHY type
1972 #ifdef ENABLE_DOT11D
1976 int channel_map[MAX_CHANNEL_NUMBER+1];
1978 int rate; /* current rate */
1980 //FIXME: pleace callback, see if redundant with softmac_features
1983 /* this contains flags for selectively enable softmac support */
1984 u16 softmac_features;
1986 /* if the sequence control field is not filled by HW */
1989 /* association procedure transaction sequence number */
1992 /* AID for RTXed association responses */
1995 /* power save mode related*/
2000 struct tasklet_struct ps_task;
2005 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2008 short proto_started;
2010 struct semaphore wx_sem;
2011 struct semaphore scan_sem;
2013 spinlock_t mgmt_tx_lock;
2014 spinlock_t beacon_lock;
2021 u8 wpax_type_set; //{added by David, 2006.9.28}
2022 u32 wpax_type_notify; //{added by David, 2006.9.26}
2024 /* QoS related flag */
2025 char init_wmmparam_flag;
2026 /* set on initialization */
2029 /* for discarding duplicated packets in IBSS */
2030 struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
2032 /* for discarding duplicated packets in BSS */
2033 u16 last_rxseq_num[17]; /* rx seq previous per-tid */
2034 u16 last_rxfrag_num[17];/* tx frag previous per-tid */
2035 unsigned long last_packet_time[17];
2038 unsigned long last_rx_ps_time;
2040 /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
2041 struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
2042 int mgmt_queue_head;
2043 int mgmt_queue_tail;
2044 //{ added for rtl819x
2045 #define IEEE80211_QUEUE_LIMIT 128
2047 unsigned int hw_header;
2048 struct sk_buff_head skb_waitQ[MAX_QUEUE_SIZE];
2049 struct sk_buff_head skb_aggQ[MAX_QUEUE_SIZE];
2050 struct sk_buff_head skb_drv_aggQ[MAX_QUEUE_SIZE];
2051 u32 sta_edca_param[4];
2053 // Enable/Disable Rx immediate BA capability.
2054 bool enable_rx_imm_BA;
2055 bool bibsscoordinator;
2057 //+by amy for DM ,080515
2058 //Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15
2059 bool bdynamic_txpower_enable;
2061 bool bCTSToSelfEnable;
2064 u32 fsync_time_interval;
2065 u32 fsync_rate_bitmap;
2066 u8 fsync_rssi_threshold;
2069 u8 fsync_multiple_timeinterval; // FsyncMultipleTimeInterval * FsyncTimeInterval
2070 u32 fsync_firstdiff_ratethreshold; // low threshold
2071 u32 fsync_seconddiff_ratethreshold; // decrease threshold
2072 Fsync_State fsync_state;
2073 bool bis_any_nonbepkts;
2074 //20Mhz 40Mhz AutoSwitch Threshold
2075 bandwidth_autoswitch bandwidth_auto_switch;
2076 //for txpower tracking
2079 //added by amy for AP roaming
2080 RT_LINK_DETECT_T LinkDetectInfo;
2081 //added by amy for ps
2082 RT_POWER_SAVE_CONTROL PowerSaveControl;
2084 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2085 struct tx_pending_t tx_pending;
2087 /* used if IEEE_SOFTMAC_ASSOCIATE is set */
2088 struct timer_list associate_timer;
2090 /* used if IEEE_SOFTMAC_BEACONS is set */
2091 struct timer_list beacon_timer;
2092 struct work_struct associate_complete_wq;
2093 struct work_struct associate_procedure_wq;
2094 struct delayed_work softmac_scan_wq;
2095 struct delayed_work associate_retry_wq;
2096 struct delayed_work start_ibss_wq;
2097 struct work_struct wx_sync_scan_wq;
2098 struct workqueue_struct *wq;
2099 // Qos related. Added by Annie, 2005-11-01.
2102 //u32 STA_EDCA_PARAM[4];
2103 //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
2106 /* Callback functions */
2107 void (*set_security)(struct net_device *dev,
2108 struct ieee80211_security *sec);
2110 /* Used to TX data frame by using txb structs.
2111 * this is not used if in the softmac_features
2112 * is set the flag IEEE_SOFTMAC_TX_QUEUE
2114 int (*hard_start_xmit)(struct ieee80211_txb *txb,
2115 struct net_device *dev);
2117 int (*reset_port)(struct net_device *dev);
2118 int (*is_queue_full) (struct net_device * dev, int pri);
2120 int (*handle_management) (struct net_device * dev,
2121 struct ieee80211_network * network, u16 type);
2122 int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
2124 /* Softmac-generated frames (mamagement) are TXed via this
2125 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
2126 * not set. As some cards may have different HW queues that
2127 * one might want to use for data and management frames
2128 * the option to have two callbacks might be useful.
2129 * This fucntion can't sleep.
2131 int (*softmac_hard_start_xmit)(struct sk_buff *skb,
2132 struct net_device *dev);
2134 /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
2135 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
2136 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
2137 * then also management frames are sent via this callback.
2138 * This function can't sleep.
2140 void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
2141 struct net_device *dev,int rate);
2143 /* stops the HW queue for DATA frames. Useful to avoid
2144 * waste time to TX data frame when we are reassociating
2145 * This function can sleep.
2147 void (*data_hard_stop)(struct net_device *dev);
2149 /* OK this is complementar to data_poll_hard_stop */
2150 void (*data_hard_resume)(struct net_device *dev);
2152 /* ask to the driver to retune the radio .
2153 * This function can sleep. the driver should ensure
2154 * the radio has been swithced before return.
2156 void (*set_chan)(struct net_device *dev,short ch);
2158 /* These are not used if the ieee stack takes care of
2159 * scanning (IEEE_SOFTMAC_SCAN feature set).
2160 * In this case only the set_chan is used.
2162 * The syncro version is similar to the start_scan but
2163 * does not return until all channels has been scanned.
2164 * this is called in user context and should sleep,
2165 * it is called in a work_queue when swithcing to ad-hoc mode
2166 * or in behalf of iwlist scan when the card is associated
2167 * and root user ask for a scan.
2168 * the fucntion stop_scan should stop both the syncro and
2169 * background scanning and can sleep.
2170 * The fucntion start_scan should initiate the background
2171 * scanning and can't sleep.
2173 void (*scan_syncro)(struct net_device *dev);
2174 void (*start_scan)(struct net_device *dev);
2175 void (*stop_scan)(struct net_device *dev);
2177 /* indicate the driver that the link state is changed
2178 * for example it may indicate the card is associated now.
2179 * Driver might be interested in this to apply RX filter
2180 * rules or simply light the LINK led
2182 void (*link_change)(struct net_device *dev);
2184 /* these two function indicates to the HW when to start
2185 * and stop to send beacons. This is used when the
2186 * IEEE_SOFTMAC_BEACONS is not set. For now the
2187 * stop_send_bacons is NOT guaranteed to be called only
2188 * after start_send_beacons.
2190 void (*start_send_beacons) (struct net_device *dev,u16 tx_rate);
2191 void (*stop_send_beacons) (struct net_device *dev);
2193 /* power save mode related */
2194 void (*sta_wake_up) (struct net_device *dev);
2195 void (*ps_request_tx_ack) (struct net_device *dev);
2196 void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
2197 short (*ps_is_queue_empty) (struct net_device *dev);
2198 int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
2199 int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
2202 /* check whether Tx hw resouce available */
2203 short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
2204 //added by wb for HT related
2205 // void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
2206 void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
2207 // void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
2208 bool (*GetNmodeSupportBySecCfg)(struct net_device* dev);
2209 void (*SetWirelessMode)(struct net_device* dev, u8 wireless_mode);
2210 bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device* dev);
2211 void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
2213 /* This must be the last item so that it points to the data
2214 * allocated beyond this structure by alloc_ieee80211 */
2218 #define IEEE_A (1<<0)
2219 #define IEEE_B (1<<1)
2220 #define IEEE_G (1<<2)
2221 #define IEEE_N_24G (1<<4)
2222 #define IEEE_N_5G (1<<5)
2223 #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
2225 /* Generate a 802.11 header */
2227 /* Uses the channel change callback directly
2228 * instead of [start/stop] scan callbacks
2230 #define IEEE_SOFTMAC_SCAN (1<<2)
2232 /* Perform authentication and association handshake */
2233 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
2235 /* Generate probe requests */
2236 #define IEEE_SOFTMAC_PROBERQ (1<<4)
2238 /* Generate respones to probe requests */
2239 #define IEEE_SOFTMAC_PROBERS (1<<5)
2241 /* The ieee802.11 stack will manages the netif queue
2242 * wake/stop for the driver, taking care of 802.11
2243 * fragmentation. See softmac.c for details. */
2244 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
2246 /* Uses only the softmac_data_hard_start_xmit
2247 * even for TX management frames.
2249 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
2251 /* Generate beacons. The stack will enqueue beacons
2254 #define IEEE_SOFTMAC_BEACONS (1<<6)
2256 static inline void *ieee80211_priv(struct net_device *dev)
2258 return ((struct ieee80211_device *)netdev_priv(dev))->priv;
2261 extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
2263 /* Single white space is for Linksys APs */
2264 if (essid_len == 1 && essid[0] == ' ')
2267 /* Otherwise, if the entire essid is 0, we assume it is hidden */
2270 if (essid[essid_len] != '\0')
2277 extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
2280 * It is possible for both access points and our device to support
2281 * combinations of modes, so as long as there is one valid combination
2282 * of ap/device supported modes, then return success
2285 if ((mode & IEEE_A) &&
2286 (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
2287 (ieee->freq_band & IEEE80211_52GHZ_BAND))
2290 if ((mode & IEEE_G) &&
2291 (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
2292 (ieee->freq_band & IEEE80211_24GHZ_BAND))
2295 if ((mode & IEEE_B) &&
2296 (ieee->modulation & IEEE80211_CCK_MODULATION) &&
2297 (ieee->freq_band & IEEE80211_24GHZ_BAND))
2303 extern inline int ieee80211_get_hdrlen(u16 fc)
2305 int hdrlen = IEEE80211_3ADDR_LEN;
2307 switch (WLAN_FC_GET_TYPE(fc)) {
2308 case IEEE80211_FTYPE_DATA:
2309 if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
2310 hdrlen = IEEE80211_4ADDR_LEN; /* Addr4 */
2311 if(IEEE80211_QOS_HAS_SEQ(fc))
2312 hdrlen += 2; /* QOS ctrl*/
2314 case IEEE80211_FTYPE_CTL:
2315 switch (WLAN_FC_GET_STYPE(fc)) {
2316 case IEEE80211_STYPE_CTS:
2317 case IEEE80211_STYPE_ACK:
2318 hdrlen = IEEE80211_1ADDR_LEN;
2321 hdrlen = IEEE80211_2ADDR_LEN;
2330 static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
2332 switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
2333 case IEEE80211_1ADDR_LEN:
2334 return ((struct ieee80211_hdr_1addr *)hdr)->payload;
2335 case IEEE80211_2ADDR_LEN:
2336 return ((struct ieee80211_hdr_2addr *)hdr)->payload;
2337 case IEEE80211_3ADDR_LEN:
2338 return ((struct ieee80211_hdr_3addr *)hdr)->payload;
2339 case IEEE80211_4ADDR_LEN:
2340 return ((struct ieee80211_hdr_4addr *)hdr)->payload;
2345 static inline int ieee80211_is_ofdm_rate(u8 rate)
2347 switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
2348 case IEEE80211_OFDM_RATE_6MB:
2349 case IEEE80211_OFDM_RATE_9MB:
2350 case IEEE80211_OFDM_RATE_12MB:
2351 case IEEE80211_OFDM_RATE_18MB:
2352 case IEEE80211_OFDM_RATE_24MB:
2353 case IEEE80211_OFDM_RATE_36MB:
2354 case IEEE80211_OFDM_RATE_48MB:
2355 case IEEE80211_OFDM_RATE_54MB:
2361 static inline int ieee80211_is_cck_rate(u8 rate)
2363 switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
2364 case IEEE80211_CCK_RATE_1MB:
2365 case IEEE80211_CCK_RATE_2MB:
2366 case IEEE80211_CCK_RATE_5MB:
2367 case IEEE80211_CCK_RATE_11MB:
2375 extern void free_ieee80211(struct net_device *dev);
2376 extern struct net_device *alloc_ieee80211(int sizeof_priv);
2378 extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
2380 /* ieee80211_tx.c */
2382 extern int ieee80211_encrypt_fragment(
2383 struct ieee80211_device *ieee,
2384 struct sk_buff *frag,
2387 extern int ieee80211_xmit(struct sk_buff *skb,
2388 struct net_device *dev);
2389 extern void ieee80211_txb_free(struct ieee80211_txb *);
2392 /* ieee80211_rx.c */
2393 extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
2394 struct ieee80211_rx_stats *rx_stats);
2395 extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
2396 struct ieee80211_hdr_4addr *header,
2397 struct ieee80211_rx_stats *stats);
2399 /* ieee80211_wx.c */
2400 extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
2401 struct iw_request_info *info,
2402 union iwreq_data *wrqu, char *key);
2403 extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
2404 struct iw_request_info *info,
2405 union iwreq_data *wrqu, char *key);
2406 extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
2407 struct iw_request_info *info,
2408 union iwreq_data *wrqu, char *key);
2409 #if WIRELESS_EXT >= 18
2410 extern int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
2411 struct iw_request_info *info,
2412 union iwreq_data* wrqu, char *extra);
2413 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
2414 struct iw_request_info *info,
2415 union iwreq_data* wrqu, char *extra);
2416 extern int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
2417 struct iw_request_info *info,
2418 struct iw_param *data, char *extra);
2419 extern int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
2420 struct iw_request_info *info,
2421 union iwreq_data *wrqu, char *extra);
2423 extern int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
2425 /* ieee80211_softmac.c */
2426 extern short ieee80211_is_54g(struct ieee80211_network net);
2427 extern short ieee80211_is_shortslot(struct ieee80211_network net);
2428 extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
2429 struct ieee80211_rx_stats *rx_stats, u16 type,
2431 extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net);
2433 void SendDisassociation(struct ieee80211_device *ieee, u8* asSta, u8 asRsn);
2434 extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee);
2436 extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
2437 extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
2438 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
2439 extern void ieee80211_start_bss(struct ieee80211_device *ieee);
2440 extern void ieee80211_start_master_bss(struct ieee80211_device *ieee);
2441 extern void ieee80211_start_ibss(struct ieee80211_device *ieee);
2442 extern void ieee80211_softmac_init(struct ieee80211_device *ieee);
2443 extern void ieee80211_softmac_free(struct ieee80211_device *ieee);
2444 extern void ieee80211_associate_abort(struct ieee80211_device *ieee);
2445 extern void ieee80211_disassociate(struct ieee80211_device *ieee);
2446 extern void ieee80211_stop_scan(struct ieee80211_device *ieee);
2447 extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
2448 extern void ieee80211_check_all_nets(struct ieee80211_device *ieee);
2449 extern void ieee80211_start_protocol(struct ieee80211_device *ieee);
2450 extern void ieee80211_stop_protocol(struct ieee80211_device *ieee);
2451 extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
2452 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee);
2453 extern void ieee80211_reset_queue(struct ieee80211_device *ieee);
2454 extern void ieee80211_wake_queue(struct ieee80211_device *ieee);
2455 extern void ieee80211_stop_queue(struct ieee80211_device *ieee);
2456 extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
2457 extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
2458 extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
2459 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p);
2460 extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
2461 extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
2463 extern void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee);
2465 /* ieee80211_crypt_ccmp&tkip&wep.c */
2466 extern void ieee80211_tkip_null(void);
2467 extern void ieee80211_wep_null(void);
2468 extern void ieee80211_ccmp_null(void);
2470 /* ieee80211_softmac_wx.c */
2472 extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
2473 struct iw_request_info *info,
2474 union iwreq_data *wrqu, char *ext);
2476 extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
2477 struct iw_request_info *info,
2478 union iwreq_data *awrq,
2481 extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b);
2483 extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
2484 struct iw_request_info *info,
2485 union iwreq_data *wrqu, char *extra);
2487 extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
2488 struct iw_request_info *info,
2489 union iwreq_data *wrqu, char *extra);
2491 extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
2492 union iwreq_data *wrqu, char *b);
2494 extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a,
2495 union iwreq_data *wrqu, char *b);
2497 extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
2498 struct iw_request_info *a,
2499 union iwreq_data *wrqu, char *extra);
2501 extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
2502 union iwreq_data *wrqu, char *b);
2504 extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
2505 union iwreq_data *wrqu, char *b);
2507 extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
2508 union iwreq_data *wrqu, char *b);
2510 //extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
2511 extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
2514 extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
2515 struct iw_request_info *info,
2516 union iwreq_data *wrqu, char *extra);
2518 extern int ieee80211_wx_get_name(struct ieee80211_device *ieee,
2519 struct iw_request_info *info,
2520 union iwreq_data *wrqu, char *extra);
2522 extern int ieee80211_wx_set_power(struct ieee80211_device *ieee,
2523 struct iw_request_info *info,
2524 union iwreq_data *wrqu, char *extra);
2526 extern int ieee80211_wx_get_power(struct ieee80211_device *ieee,
2527 struct iw_request_info *info,
2528 union iwreq_data *wrqu, char *extra);
2530 extern int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
2531 struct iw_request_info *info,
2532 union iwreq_data *wrqu, char *extra);
2534 extern int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
2535 struct iw_request_info *info,
2536 union iwreq_data *wrqu, char *extra);
2538 #define MAX_RECEIVE_BUFFER_SIZE 9100 //
2539 extern void HTDebugHTCapability(u8* CapIE, u8* TitleString );
2540 extern void HTDebugHTInfo(u8* InfoIE, u8* TitleString);
2542 void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
2543 extern void HTUpdateDefaultSetting(struct ieee80211_device* ieee);
2544 extern void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 isEncrypt);
2545 extern void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* len, u8 isEncrypt);
2546 extern void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, u8* len);
2547 extern void HTOnAssocRsp(struct ieee80211_device *ieee);
2548 extern void HTInitializeHTInfo(struct ieee80211_device* ieee);
2549 extern void HTInitializeBssDesc(PBSS_HT pBssHT);
2550 extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
2551 extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
2552 extern u8 HTGetHighestMCSRate(struct ieee80211_device* ieee, u8* pMCSRateSet, u8* pMCSFilter);
2553 extern u8 MCS_FILTER_ALL[];
2554 extern u16 MCS_DATA_RATE[2][2][77] ;
2555 extern u8 HTCCheck(struct ieee80211_device* ieee, u8* pFrame);
2556 //extern void HTSetConnectBwModeCallback(unsigned long data);
2557 extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo);
2558 extern bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee);
2559 extern u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee, u8 nMcsRate);
2560 extern u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate);
2561 extern u16 TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate);
2562 //function in BAPROC.c
2563 extern int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb);
2564 extern int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb);
2565 extern int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb);
2566 extern void TsInitAddBA( struct ieee80211_device* ieee, PTX_TS_RECORD pTS, u8 Policy, u8 bOverwritePending);
2567 extern void TsInitDelBA( struct ieee80211_device* ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
2568 extern void BaSetupTimeOut(unsigned long data);
2569 extern void TxBaInactTimeout(unsigned long data);
2570 extern void RxBaInactTimeout(unsigned long data);
2571 extern void ResetBaEntry( PBA_RECORD pBA);
2574 struct ieee80211_device* ieee,
2575 PTS_COMMON_INFO *ppTS,
2578 TR_SELECT TxRxSelect, //Rx:1, Tx:0
2581 extern void TSInitialize(struct ieee80211_device *ieee);
2582 extern void TsStartAddBaProcess(struct ieee80211_device* ieee, PTX_TS_RECORD pTxTS);
2583 extern void RemovePeerTS(struct ieee80211_device* ieee, u8* Addr);
2584 extern void RemoveAllTS(struct ieee80211_device* ieee);
2585 void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
2587 extern const long ieee80211_wlan_frequencies[];
2589 extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
2594 extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
2599 static inline const char *escape_essid(const char *essid, u8 essid_len) {
2600 static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
2601 const char *s = essid;
2604 if (ieee80211_is_empty_essid(essid, essid_len)) {
2605 memcpy(escaped, "<hidden>", sizeof("<hidden>"));
2609 essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
2610 while (essid_len--) {
2623 /* For the function is more related to hardware setting, it's better to use the
2624 * ieee handler to refer to it.
2626 extern short check_nic_enough_desc(struct net_device *dev, int queue_index);
2627 extern int ieee80211_data_xmit(struct sk_buff *skb, struct net_device *dev);
2628 extern int ieee80211_parse_info_param(struct ieee80211_device *ieee,
2629 struct ieee80211_info_element *info_element,
2631 struct ieee80211_network *network,
2632 struct ieee80211_rx_stats *stats);
2634 void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb** prxbIndicateArray,u8 index);
2635 #define RT_ASOC_RETRY_LIMIT 5
2636 #endif /* IEEE80211_H */