1 //------------------------------------------------------------------------------
2 // Copyright (c) 2004-2010 Atheros Communications Inc.
3 // All rights reserved.
7 // Permission to use, copy, modify, and/or distribute this software for any
8 // purpose with or without fee is hereby granted, provided that the above
9 // copyright notice and this permission notice appear in all copies.
11 // THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 // WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 // MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 // ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 // WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 // ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 // OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
21 // Author(s): ="Atheros"
22 //------------------------------------------------------------------------------
25 * This driver is a pseudo ethernet driver to access the Atheros AR6000
29 #include "ar6000_drv.h"
30 #ifdef ATH6K_CONFIG_CFG80211
32 #endif /* ATH6K_CONFIG_CFG80211 */
34 #include "wmi_filter_linux.h"
35 #include "epping_test.h"
36 #include "wlan_config.h"
37 #include "ar3kconfig.h"
39 #include "AR6002/addrs.h"
42 /* LINUX_HACK_FUDGE_FACTOR -- this is used to provide a workaround for linux behavior. When
43 * the meta data was added to the header it was found that linux did not correctly provide
44 * enough headroom. However when more headroom was requested beyond what was truly needed
45 * Linux gave the requested headroom. Therefore to get the necessary headroom from Linux
46 * the driver requests more than is needed by the amount = LINUX_HACK_FUDGE_FACTOR */
47 #define LINUX_HACK_FUDGE_FACTOR 16
48 #define BDATA_BDADDR_OFFSET 28
50 A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
51 A_UINT8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
55 #define ATH_DEBUG_DBG_LOG ATH_DEBUG_MAKE_MODULE_MASK(0)
56 #define ATH_DEBUG_WLAN_CONNECT ATH_DEBUG_MAKE_MODULE_MASK(1)
57 #define ATH_DEBUG_WLAN_SCAN ATH_DEBUG_MAKE_MODULE_MASK(2)
58 #define ATH_DEBUG_WLAN_TX ATH_DEBUG_MAKE_MODULE_MASK(3)
59 #define ATH_DEBUG_WLAN_RX ATH_DEBUG_MAKE_MODULE_MASK(4)
60 #define ATH_DEBUG_HTC_RAW ATH_DEBUG_MAKE_MODULE_MASK(5)
61 #define ATH_DEBUG_HCI_BRIDGE ATH_DEBUG_MAKE_MODULE_MASK(6)
63 static ATH_DEBUG_MASK_DESCRIPTION driver_debug_desc[] = {
64 { ATH_DEBUG_DBG_LOG , "Target Debug Logs"},
65 { ATH_DEBUG_WLAN_CONNECT , "WLAN connect"},
66 { ATH_DEBUG_WLAN_SCAN , "WLAN scan"},
67 { ATH_DEBUG_WLAN_TX , "WLAN Tx"},
68 { ATH_DEBUG_WLAN_RX , "WLAN Rx"},
69 { ATH_DEBUG_HTC_RAW , "HTC Raw IF tracing"},
70 { ATH_DEBUG_HCI_BRIDGE , "HCI Bridge Setup"},
71 { ATH_DEBUG_HCI_RECV , "HCI Recv tracing"},
72 { ATH_DEBUG_HCI_DUMP , "HCI Packet dumps"},
75 ATH_DEBUG_INSTANTIATE_MODULE_VAR(driver,
77 "Linux Driver Interface",
78 ATH_DEBUG_MASK_DEFAULTS | ATH_DEBUG_WLAN_SCAN |
80 ATH_DEBUG_DESCRIPTION_COUNT(driver_debug_desc),
86 #define IS_MAC_NULL(mac) (mac[0]==0 && mac[1]==0 && mac[2]==0 && mac[3]==0 && mac[4]==0 && mac[5]==0)
87 #define IS_MAC_BCAST(mac) (*mac==0xff)
89 #define DESCRIPTION "Driver to access the Atheros AR600x Device, version " __stringify(__VER_MAJOR_) "." __stringify(__VER_MINOR_) "." __stringify(__VER_PATCH_) "." __stringify(__BUILD_NUMBER_)
91 MODULE_AUTHOR("Atheros Communications, Inc.");
92 MODULE_DESCRIPTION(DESCRIPTION);
93 MODULE_LICENSE("Dual BSD/GPL");
95 #ifndef REORG_APTC_HEURISTICS
96 #undef ADAPTIVE_POWER_THROUGHPUT_CONTROL
97 #endif /* REORG_APTC_HEURISTICS */
99 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
100 #define APTC_TRAFFIC_SAMPLING_INTERVAL 100 /* msec */
101 #define APTC_UPPER_THROUGHPUT_THRESHOLD 3000 /* Kbps */
102 #define APTC_LOWER_THROUGHPUT_THRESHOLD 2000 /* Kbps */
104 typedef struct aptc_traffic_record {
105 A_BOOL timerScheduled;
106 struct timeval samplingTS;
107 unsigned long bytesReceived;
108 unsigned long bytesTransmitted;
109 } APTC_TRAFFIC_RECORD;
112 APTC_TRAFFIC_RECORD aptcTR;
113 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
115 #ifdef EXPORT_HCI_BRIDGE_INTERFACE
116 // callbacks registered by HCI transport driver
117 HCI_TRANSPORT_CALLBACKS ar6kHciTransCallbacks = { NULL };
120 unsigned int processDot11Hdr = 0;
121 int bmienable = BMIENABLE_DEFAULT;
123 char ifname[IFNAMSIZ] = {0,};
125 int wlaninitmode = WLAN_INIT_MODE_DEFAULT;
126 unsigned int bypasswmi = 0;
127 unsigned int debuglevel = 0;
128 int tspecCompliance = ATHEROS_COMPLIANCE;
129 unsigned int busspeedlow = 0;
130 unsigned int onebitmode = 0;
131 unsigned int skipflash = 0;
132 unsigned int wmitimeout = 2;
133 unsigned int wlanNodeCaching = 1;
134 unsigned int enableuartprint = ENABLEUARTPRINT_DEFAULT;
135 unsigned int logWmiRawMsgs = 0;
136 unsigned int enabletimerwar = 0;
137 unsigned int fwmode = 1;
138 unsigned int mbox_yield_limit = 99;
139 unsigned int enablerssicompensation = 0;
140 int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF;
141 int allow_trace_signal = 0;
142 #ifdef CONFIG_HOST_TCMD_SUPPORT
143 unsigned int testmode =0;
146 unsigned int irqprocmode = HIF_DEVICE_IRQ_SYNC_ONLY;//HIF_DEVICE_IRQ_ASYNC_SYNC;
147 unsigned int panic_on_assert = 1;
148 unsigned int nohifscattersupport = NOHIFSCATTERSUPPORT_DEFAULT;
150 unsigned int setuphci = SETUPHCI_DEFAULT;
151 unsigned int setuphcipal = SETUPHCIPAL_DEFAULT;
152 unsigned int loghci = 0;
153 unsigned int setupbtdev = SETUPBTDEV_DEFAULT;
154 #ifndef EXPORT_HCI_BRIDGE_INTERFACE
155 unsigned int ar3khcibaud = AR3KHCIBAUD_DEFAULT;
156 unsigned int hciuartscale = HCIUARTSCALE_DEFAULT;
157 unsigned int hciuartstep = HCIUARTSTEP_DEFAULT;
159 #ifdef CONFIG_CHECKSUM_OFFLOAD
160 unsigned int csumOffload=0;
161 unsigned int csumOffloadTest=0;
163 unsigned int eppingtest=0;
165 module_param_string(ifname, ifname, sizeof(ifname), 0644);
166 module_param(wlaninitmode, int, 0644);
167 module_param(bmienable, int, 0644);
168 module_param(bypasswmi, uint, 0644);
169 module_param(debuglevel, uint, 0644);
170 module_param(tspecCompliance, int, 0644);
171 module_param(onebitmode, uint, 0644);
172 module_param(busspeedlow, uint, 0644);
173 module_param(skipflash, uint, 0644);
174 module_param(wmitimeout, uint, 0644);
175 module_param(wlanNodeCaching, uint, 0644);
176 module_param(logWmiRawMsgs, uint, 0644);
177 module_param(enableuartprint, uint, 0644);
178 module_param(enabletimerwar, uint, 0644);
179 module_param(fwmode, uint, 0644);
180 module_param(mbox_yield_limit, uint, 0644);
181 module_param(reduce_credit_dribble, int, 0644);
182 module_param(allow_trace_signal, int, 0644);
183 module_param(enablerssicompensation, uint, 0644);
184 module_param(processDot11Hdr, uint, 0644);
185 #ifdef CONFIG_CHECKSUM_OFFLOAD
186 module_param(csumOffload, uint, 0644);
188 #ifdef CONFIG_HOST_TCMD_SUPPORT
189 module_param(testmode, uint, 0644);
191 module_param(irqprocmode, uint, 0644);
192 module_param(nohifscattersupport, uint, 0644);
193 module_param(panic_on_assert, uint, 0644);
194 module_param(setuphci, uint, 0644);
195 module_param(setuphcipal, uint, 0644);
196 module_param(loghci, uint, 0644);
197 module_param(setupbtdev, uint, 0644);
198 #ifndef EXPORT_HCI_BRIDGE_INTERFACE
199 module_param(ar3khcibaud, uint, 0644);
200 module_param(hciuartscale, uint, 0644);
201 module_param(hciuartstep, uint, 0644);
203 module_param(eppingtest, uint, 0644);
205 /* in 2.6.10 and later this is now a pointer to a uint */
206 unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX;
207 #define mboxnum &_mboxnum
210 A_UINT32 g_dbg_flags = DBG_DEFAULTS;
211 unsigned int debugflags = 0;
213 unsigned int debughtc = 0;
214 unsigned int debugbmi = 0;
215 unsigned int debughif = 0;
216 unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0};
217 unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0};
218 unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0};
219 unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0};
220 module_param(debugflags, uint, 0644);
221 module_param(debugdriver, int, 0644);
222 module_param(debughtc, uint, 0644);
223 module_param(debugbmi, uint, 0644);
224 module_param(debughif, uint, 0644);
225 module_param_array(txcreditsavailable, uint, mboxnum, 0644);
226 module_param_array(txcreditsconsumed, uint, mboxnum, 0644);
227 module_param_array(txcreditintrenable, uint, mboxnum, 0644);
228 module_param_array(txcreditintrenableaggregate, uint, mboxnum, 0644);
232 unsigned int resetok = 1;
233 unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0};
234 unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0};
235 unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0};
236 unsigned int hifBusRequestNumMax = 40;
237 unsigned int war23838_disabled = 0;
238 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
239 unsigned int enableAPTCHeuristics = 1;
240 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
241 module_param_array(tx_attempt, uint, mboxnum, 0644);
242 module_param_array(tx_post, uint, mboxnum, 0644);
243 module_param_array(tx_complete, uint, mboxnum, 0644);
244 module_param(hifBusRequestNumMax, uint, 0644);
245 module_param(war23838_disabled, uint, 0644);
246 module_param(resetok, uint, 0644);
247 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
248 module_param(enableAPTCHeuristics, uint, 0644);
249 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
251 #ifdef BLOCK_TX_PATH_FLAG
253 module_param(blocktx, int, 0644);
254 #endif /* BLOCK_TX_PATH_FLAG */
256 typedef struct user_rssi_compensation_t {
268 } USER_RSSI_CPENSATION;
270 static USER_RSSI_CPENSATION rssi_compensation_param;
272 static A_INT16 rssi_compensation_table[96];
274 int reconnect_flag = 0;
275 static ar6k_pal_config_t ar6k_pal_config_g;
277 /* Function declarations */
278 static int ar6000_init_module(void);
279 static void ar6000_cleanup_module(void);
281 int ar6000_init(struct net_device *dev);
282 static int ar6000_open(struct net_device *dev);
283 static int ar6000_close(struct net_device *dev);
284 static void ar6000_init_control_info(AR_SOFTC_T *ar);
285 static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev);
287 void ar6000_destroy(struct net_device *dev, unsigned int unregister);
288 static void ar6000_detect_error(unsigned long ptr);
289 static void ar6000_set_multicast_list(struct net_device *dev);
290 static struct net_device_stats *ar6000_get_stats(struct net_device *dev);
291 static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev);
293 static void disconnect_timer_handler(unsigned long ptr);
295 void read_rssi_compensation_param(AR_SOFTC_T *ar);
297 /* for android builds we call external APIs that handle firmware download and configuration */
299 /* !!!! Interim android support to make it easier to patch the default driver for
300 * android use. You must define an external source file ar6000_android.c that handles the following
302 extern void android_module_init(OSDRV_CALLBACKS *osdrvCallbacks);
303 extern void android_module_exit(void);
306 * HTC service connection handlers
308 static A_STATUS ar6000_avail_ev(void *context, void *hif_handle);
310 static A_STATUS ar6000_unavail_ev(void *context, void *hif_handle);
312 A_STATUS ar6000_configure_target(AR_SOFTC_T *ar);
314 static void ar6000_target_failure(void *Instance, A_STATUS Status);
316 static void ar6000_rx(void *Context, HTC_PACKET *pPacket);
318 static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint);
320 static void ar6000_tx_complete(void *Context, HTC_PACKET_QUEUE *pPackets);
322 static HTC_SEND_FULL_ACTION ar6000_tx_queue_full(void *Context, HTC_PACKET *pPacket);
324 #ifdef ATH_AR6K_11N_SUPPORT
325 static void ar6000_alloc_netbufs(A_NETBUF_QUEUE_T *q, A_UINT16 num);
327 static void ar6000_deliver_frames_to_nw_stack(void * dev, void *osbuf);
328 //static void ar6000_deliver_frames_to_bt_stack(void * dev, void *osbuf);
330 static HTC_PACKET *ar6000_alloc_amsdu_rxbuf(void *Context, HTC_ENDPOINT_ID Endpoint, int Length);
332 static void ar6000_refill_amsdu_rxbufs(AR_SOFTC_T *ar, int Count);
334 static void ar6000_cleanup_amsdu_rxbufs(AR_SOFTC_T *ar);
337 ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj,
338 struct bin_attribute *bin_attr,
339 char *buf, loff_t pos, size_t count);
342 ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj,
343 struct bin_attribute *bin_attr,
344 char *buf, loff_t pos, size_t count);
347 ar6000_sysfs_bmi_init(AR_SOFTC_T *ar);
349 /* HCI PAL callback function declarations */
350 A_STATUS ar6k_setup_hci_pal(AR_SOFTC_T *ar);
351 void ar6k_cleanup_hci_pal(AR_SOFTC_T *ar);
354 ar6000_sysfs_bmi_deinit(AR_SOFTC_T *ar);
357 ar6000_sysfs_bmi_get_config(AR_SOFTC_T *ar, A_UINT32 mode);
363 struct net_device *ar6000_devices[MAX_AR6000];
364 static int is_netdev_registered;
365 extern struct iw_handler_def ath_iw_handler_def;
366 DECLARE_WAIT_QUEUE_HEAD(arEvent);
367 static void ar6000_cookie_init(AR_SOFTC_T *ar);
368 static void ar6000_cookie_cleanup(AR_SOFTC_T *ar);
369 static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie);
370 static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar);
373 static A_STATUS ar6000_reinstall_keys(AR_SOFTC_T *ar,A_UINT8 key_op_ctrl);
376 #ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT
377 struct net_device *arApNetDev;
378 #endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
380 static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM];
382 #define HOST_INTEREST_ITEM_ADDRESS(ar, item) \
383 (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_HOST_INTEREST_ITEM_ADDRESS(item) : \
384 (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_HOST_INTEREST_ITEM_ADDRESS(item) : 0))
387 static struct net_device_ops ar6000_netdev_ops = {
389 .ndo_open = ar6000_open,
390 .ndo_stop = ar6000_close,
391 .ndo_get_stats = ar6000_get_stats,
392 .ndo_do_ioctl = ar6000_ioctl,
393 .ndo_start_xmit = ar6000_data_tx,
394 .ndo_set_multicast_list = ar6000_set_multicast_list,
397 /* Debug log support */
400 * Flag to govern whether the debug logs should be parsed in the kernel
401 * or reported to the application.
403 #define REPORT_DEBUG_LOGS_TO_APP
406 ar6000_set_host_app_area(AR_SOFTC_T *ar)
408 A_UINT32 address, data;
409 struct host_app_area_s host_app_area;
411 /* Fetch the address of the host_app_area_s instance in the host interest area */
412 address = TARG_VTOP(ar->arTargetType, HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest));
413 if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) {
416 address = TARG_VTOP(ar->arTargetType, data);
417 host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION;
418 if (ar6000_WriteDataDiag(ar->arHifDevice, address,
419 (A_UCHAR *)&host_app_area,
420 sizeof(struct host_app_area_s)) != A_OK)
429 dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar)
435 address = TARG_VTOP(ar->arTargetType, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr));
436 if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address,
437 (A_UCHAR *)¶m, 4)) != A_OK)
446 * The dbglog module has been initialized. Its ok to access the relevant
447 * data stuctures over the diagnostic window.
450 ar6000_dbglog_init_done(AR_SOFTC_T *ar)
452 ar->dbglog_init_done = TRUE;
456 dbglog_get_debug_fragment(A_INT8 *datap, A_UINT32 len, A_UINT32 limit)
465 buffer = (A_INT32 *)datap;
466 length = (limit >> 2);
471 while (count < length) {
472 numargs = DBGLOG_GET_NUMARGS(buffer[count]);
473 fraglen = (count << 2);
474 count += numargs + 1;
482 dbglog_parse_debug_logs(A_INT8 *datap, A_UINT32 len)
493 buffer = (A_INT32 *)datap;
495 while (count < length) {
496 debugid = DBGLOG_GET_DBGID(buffer[count]);
497 moduleid = DBGLOG_GET_MODULEID(buffer[count]);
498 numargs = DBGLOG_GET_NUMARGS(buffer[count]);
499 timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]);
502 AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d)\n", moduleid, debugid, timestamp));
506 AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d): 0x%x\n", moduleid, debugid,
507 timestamp, buffer[count+1]));
511 AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid,
512 timestamp, buffer[count+1], buffer[count+2]));
516 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid args: %d\n", numargs));
518 count += numargs + 1;
523 ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar)
525 A_UINT32 data[8]; /* Should be able to accomodate struct dbglog_buf_s */
530 A_UINT32 debug_hdr_ptr;
532 if (!ar->dbglog_init_done) return A_ERROR;
535 AR6000_SPIN_LOCK(&ar->arLock, 0);
537 if (ar->dbgLogFetchInProgress) {
538 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
542 /* block out others */
543 ar->dbgLogFetchInProgress = TRUE;
545 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
547 debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar);
548 printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr);
550 /* Get the contents of the ring buffer */
552 address = TARG_VTOP(ar->arTargetType, debug_hdr_ptr);
553 length = 4 /* sizeof(dbuf) */ + 4 /* sizeof(dropped) */;
554 A_MEMZERO(data, sizeof(data));
555 ar6000_ReadDataDiag(ar->arHifDevice, address, (A_UCHAR *)data, length);
556 address = TARG_VTOP(ar->arTargetType, data[0] /* dbuf */);
558 dropped = data[1]; /* dropped */
559 length = 4 /* sizeof(next) */ + 4 /* sizeof(buffer) */ + 4 /* sizeof(bufsize) */ + 4 /* sizeof(length) */ + 4 /* sizeof(count) */ + 4 /* sizeof(free) */;
560 A_MEMZERO(data, sizeof(data));
561 ar6000_ReadDataDiag(ar->arHifDevice, address, (A_UCHAR *)&data, length);
564 address = TARG_VTOP(ar->arTargetType, data[1] /* buffer*/);
565 length = data[3]; /* length */
566 if ((length) && (length <= data[2] /* bufsize*/)) {
567 /* Rewind the index if it is about to overrun the buffer */
568 if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) {
571 if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
572 (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length))
576 ar6000_dbglog_event(ar, dropped, (A_INT8*)&ar->log_buffer[ar->log_cnt], length);
577 ar->log_cnt += length;
579 AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("Length: %d (Total size: %d)\n",
583 address = TARG_VTOP(ar->arTargetType, data[0] /* next */);
584 length = 4 /* sizeof(next) */ + 4 /* sizeof(buffer) */ + 4 /* sizeof(bufsize) */ + 4 /* sizeof(length) */ + 4 /* sizeof(count) */ + 4 /* sizeof(free) */;
585 A_MEMZERO(data, sizeof(data));
586 if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
587 (A_UCHAR *)&data, length))
592 } while (address != firstbuf);
595 ar->dbgLogFetchInProgress = FALSE;
601 ar6000_dbglog_event(AR_SOFTC_T *ar, A_UINT32 dropped,
602 A_INT8 *buffer, A_UINT32 length)
604 #ifdef REPORT_DEBUG_LOGS_TO_APP
605 #define MAX_WIRELESS_EVENT_SIZE 252
607 * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages.
608 * There seems to be a limitation on the length of message that could be
609 * transmitted to the user app via this mechanism.
614 send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
615 MAX_WIRELESS_EVENT_SIZE);
617 ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, (A_UINT8*)&buffer[sent], send);
619 send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
620 MAX_WIRELESS_EVENT_SIZE);
623 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Dropped logs: 0x%x\nDebug info length: %d\n",
626 /* Interpret the debug logs */
627 dbglog_parse_debug_logs((A_INT8*)buffer, length);
628 #endif /* REPORT_DEBUG_LOGS_TO_APP */
633 ar6000_init_module(void)
635 static int probed = 0;
637 OSDRV_CALLBACKS osdrvCallbacks;
639 a_module_debug_support_init();
642 /* check for debug mask overrides */
644 ATH_DEBUG_SET_DEBUG_MASK(htc,debughtc);
647 ATH_DEBUG_SET_DEBUG_MASK(bmi,debugbmi);
650 ATH_DEBUG_SET_DEBUG_MASK(hif,debughif);
652 if (debugdriver != 0) {
653 ATH_DEBUG_SET_DEBUG_MASK(driver,debugdriver);
658 A_REGISTER_MODULE_DEBUG_INFO(driver);
660 A_MEMZERO(&osdrvCallbacks,sizeof(osdrvCallbacks));
661 osdrvCallbacks.deviceInsertedHandler = ar6000_avail_ev;
662 osdrvCallbacks.deviceRemovedHandler = ar6000_unavail_ev;
664 osdrvCallbacks.deviceSuspendHandler = ar6000_suspend_ev;
665 osdrvCallbacks.deviceResumeHandler = ar6000_resume_ev;
666 osdrvCallbacks.devicePowerChangeHandler = ar6000_power_change_ev;
672 android_module_init(&osdrvCallbacks);
676 /* Set the debug flags if specified at load time */
679 g_dbg_flags = debugflags;
688 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
689 memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD));
690 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
692 #ifdef CONFIG_HOST_GPIO_SUPPORT
694 #endif /* CONFIG_HOST_GPIO_SUPPORT */
696 status = HIFInit(&osdrvCallbacks);
704 ar6000_cleanup_module(void)
707 struct net_device *ar6000_netdev;
709 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
710 /* Delete the Adaptive Power Control timer */
711 if (timer_pending(&aptcTimer)) {
712 del_timer_sync(&aptcTimer);
714 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
716 for (i=0; i < MAX_AR6000; i++) {
717 if (ar6000_devices[i] != NULL) {
718 ar6000_netdev = ar6000_devices[i];
719 ar6000_devices[i] = NULL;
720 ar6000_destroy(ar6000_netdev, 1);
724 HIFShutDownDevice(NULL);
726 a_module_debug_support_cleanup();
731 android_module_exit();
734 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_cleanup: success\n"));
737 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
739 aptcTimerHandler(unsigned long arg)
746 ar = (AR_SOFTC_T *)arg;
747 A_ASSERT(ar != NULL);
748 A_ASSERT(!timer_pending(&aptcTimer));
750 AR6000_SPIN_LOCK(&ar->arLock, 0);
752 /* Get the number of bytes transferred */
753 numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
754 aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
756 /* Calculate and decide based on throughput thresholds */
757 throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */
758 if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) {
759 /* Enable Sleep and delete the timer */
760 A_ASSERT(ar->arWmiReady == TRUE);
761 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
762 status = wmi_powermode_cmd(ar->arWmi, REC_POWER);
763 AR6000_SPIN_LOCK(&ar->arLock, 0);
764 A_ASSERT(status == A_OK);
765 aptcTR.timerScheduled = FALSE;
767 A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
770 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
772 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
774 #ifdef ATH_AR6K_11N_SUPPORT
776 ar6000_alloc_netbufs(A_NETBUF_QUEUE_T *q, A_UINT16 num)
781 if((osbuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE))) {
782 A_NETBUF_ENQUEUE(q, osbuf);
790 A_PRINTF("%s(), allocation of netbuf failed", __func__);
795 static struct bin_attribute bmi_attr = {
796 .attr = {.name = "bmi", .mode = 0600},
797 .read = ar6000_sysfs_bmi_read,
798 .write = ar6000_sysfs_bmi_write,
802 ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj,
803 struct bin_attribute *bin_attr,
804 char *buf, loff_t pos, size_t count)
808 HIF_DEVICE_OS_DEVICE_INFO *osDevInfo;
810 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Read %d bytes\n", (A_UINT32)count));
811 for (index=0; index < MAX_AR6000; index++) {
812 ar = (AR_SOFTC_T *)ar6k_priv(ar6000_devices[index]);
813 osDevInfo = &ar->osDevInfo;
814 if (kobj == (&(((struct device *)osDevInfo->pOSDevice)->kobj))) {
819 if (index == MAX_AR6000) return 0;
821 if ((BMIRawRead(ar->arHifDevice, (A_UCHAR*)buf, count, TRUE)) != A_OK) {
829 ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj,
830 struct bin_attribute *bin_attr,
831 char *buf, loff_t pos, size_t count)
835 HIF_DEVICE_OS_DEVICE_INFO *osDevInfo;
837 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Write %d bytes\n", (A_UINT32)count));
838 for (index=0; index < MAX_AR6000; index++) {
839 ar = (AR_SOFTC_T *)ar6k_priv(ar6000_devices[index]);
840 osDevInfo = &ar->osDevInfo;
841 if (kobj == (&(((struct device *)osDevInfo->pOSDevice)->kobj))) {
846 if (index == MAX_AR6000) return 0;
848 if ((BMIRawWrite(ar->arHifDevice, (A_UCHAR*)buf, count)) != A_OK) {
856 ar6000_sysfs_bmi_init(AR_SOFTC_T *ar)
860 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Creating sysfs entry\n"));
861 A_MEMZERO(&ar->osDevInfo, sizeof(HIF_DEVICE_OS_DEVICE_INFO));
863 /* Get the underlying OS device */
864 status = HIFConfigureDevice(ar->arHifDevice,
865 HIF_DEVICE_GET_OS_DEVICE,
867 sizeof(HIF_DEVICE_OS_DEVICE_INFO));
869 if (A_FAILED(status)) {
870 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Failed to get OS device info from HIF\n"));
874 /* Create a bmi entry in the sysfs filesystem */
875 if ((sysfs_create_bin_file(&(((struct device *)ar->osDevInfo.pOSDevice)->kobj), &bmi_attr)) < 0)
877 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMI: Failed to create entry for bmi in sysfs filesystem\n"));
885 ar6000_sysfs_bmi_deinit(AR_SOFTC_T *ar)
887 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Deleting sysfs entry\n"));
889 sysfs_remove_bin_file(&(((struct device *)ar->osDevInfo.pOSDevice)->kobj), &bmi_attr);
892 #define bmifn(fn) do { \
894 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); \
899 #ifdef INIT_MODE_DRV_ENABLED
901 #ifdef SOFTMAC_FILE_USED
902 #define AR6002_MAC_ADDRESS_OFFSET 0x0A
903 #define AR6003_MAC_ADDRESS_OFFSET 0x16
905 void calculate_crc(A_UINT32 TargetType, A_UCHAR *eeprom_data)
908 A_UINT16 *ptr16_eeprom;
911 A_UINT32 eeprom_size;
913 if (TargetType == TARGET_TYPE_AR6001)
916 ptr_crc = (A_UINT16 *)eeprom_data;
918 else if (TargetType == TARGET_TYPE_AR6003)
921 ptr_crc = (A_UINT16 *)((A_UCHAR *)eeprom_data + 0x04);
926 ptr_crc = (A_UINT16 *)((A_UCHAR *)eeprom_data + 0x04);
933 // Recalculate new CRC
935 ptr16_eeprom = (A_UINT16 *)eeprom_data;
936 for (i = 0;i < eeprom_size; i += 2)
938 checksum = checksum ^ (*ptr16_eeprom);
941 checksum = 0xFFFF ^ checksum;
946 ar6000_softmac_update(AR_SOFTC_T *ar, A_UCHAR *eeprom_data, size_t size)
948 const char *source = "random generated";
949 const struct firmware *softmac_entry;
951 switch (ar->arTargetType) {
952 case TARGET_TYPE_AR6002:
953 ptr_mac = (A_UINT8 *)((A_UCHAR *)eeprom_data + AR6002_MAC_ADDRESS_OFFSET);
955 case TARGET_TYPE_AR6003:
956 ptr_mac = (A_UINT8 *)((A_UCHAR *)eeprom_data + AR6003_MAC_ADDRESS_OFFSET);
959 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Target Type\n"));
962 printk(KERN_DEBUG "MAC from EEPROM %pM\n", &ptr_mac[0]);
964 /* create a random MAC in case we cannot read file from system */
968 ptr_mac[3] = random32() & 0xff;
969 ptr_mac[4] = random32() & 0xff;
970 ptr_mac[5] = random32() & 0xff;
971 if ((A_REQUEST_FIRMWARE(&softmac_entry, "softmac", ((struct device *)ar->osDevInfo.pOSDevice))) == 0)
973 A_CHAR *macbuf = A_MALLOC_NOWAIT(softmac_entry->size+1);
975 unsigned int softmac[6];
976 memcpy(macbuf, softmac_entry->data, softmac_entry->size);
977 macbuf[softmac_entry->size] = '\0';
978 if (sscanf(macbuf, "%02x:%02x:%02x:%02x:%02x:%02x",
979 &softmac[0], &softmac[1], &softmac[2],
980 &softmac[3], &softmac[4], &softmac[5])==6) {
982 for (i=0; i<6; ++i) {
983 ptr_mac[i] = softmac[i] & 0xff;
985 source = "softmac file";
989 A_RELEASE_FIRMWARE(softmac_entry);
991 printk(KERN_DEBUG "MAC from %s %pM\n", source, &ptr_mac[0]);
992 calculate_crc(ar->arTargetType, eeprom_data);
994 #endif /* SOFTMAC_FILE_USED */
997 ar6000_transfer_bin_file(AR_SOFTC_T *ar, AR6K_BIN_FILE file, A_UINT32 address, A_BOOL compressed)
1000 const char *filename;
1001 const struct firmware *fw_entry;
1002 A_UINT32 fw_entry_size;
1006 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1007 filename = AR6003_REV1_OTP_FILE;
1008 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1009 filename = AR6003_REV2_OTP_FILE;
1011 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1016 case AR6K_FIRMWARE_FILE:
1017 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1018 filename = AR6003_REV1_FIRMWARE_FILE;
1019 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1020 filename = AR6003_REV2_FIRMWARE_FILE;
1022 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1028 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1029 filename = AR6003_REV1_EPPING_FIRMWARE_FILE;
1030 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1031 filename = AR6003_REV2_EPPING_FIRMWARE_FILE;
1033 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("eppingtest : unsupported firmware revision: %d\n",
1034 ar->arVersion.target_ver));
1040 #ifdef CONFIG_HOST_TCMD_SUPPORT
1042 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1043 filename = AR6003_REV1_TCMD_FIRMWARE_FILE;
1044 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1045 filename = AR6003_REV2_TCMD_FIRMWARE_FILE;
1047 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1053 #ifdef HTC_RAW_INTERFACE
1054 if (!eppingtest && bypasswmi) {
1055 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1056 filename = AR6003_REV1_ART_FIRMWARE_FILE;
1057 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1058 filename = AR6003_REV2_ART_FIRMWARE_FILE;
1060 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1068 case AR6K_PATCH_FILE:
1069 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1070 filename = AR6003_REV1_PATCH_FILE;
1071 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1072 filename = AR6003_REV2_PATCH_FILE;
1074 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1079 case AR6K_BOARD_DATA_FILE:
1080 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1081 filename = AR6003_REV1_BOARD_DATA_FILE;
1082 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1083 filename = AR6003_REV2_BOARD_DATA_FILE;
1085 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1091 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown file type: %d\n", file));
1094 if ((A_REQUEST_FIRMWARE(&fw_entry, filename, ((struct device *)ar->osDevInfo.pOSDevice))) != 0)
1096 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to get %s\n", filename));
1100 #ifdef SOFTMAC_FILE_USED
1101 if (file==AR6K_BOARD_DATA_FILE && fw_entry->data) {
1102 ar6000_softmac_update(ar, (A_UCHAR *)fw_entry->data, fw_entry->size);
1107 fw_entry_size = fw_entry->size;
1109 /* Load extended board data for AR6003 */
1110 if ((file==AR6K_BOARD_DATA_FILE) && (fw_entry->data)) {
1111 A_UINT32 board_ext_address;
1112 A_UINT32 board_ext_data_size;
1113 A_UINT32 board_data_size;
1115 board_ext_data_size = (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_BOARD_EXT_DATA_SZ : \
1116 (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_EXT_DATA_SZ : 0));
1118 board_data_size = (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_BOARD_DATA_SZ : \
1119 (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_DATA_SZ : 0));
1121 /* Determine where in Target RAM to write Board Data */
1122 bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data), (A_UCHAR *)&board_ext_address, 4));
1123 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board extended Data download address: 0x%x\n", board_ext_address));
1125 /* check whether the target has allocated memory for extended board data and file contains extended board data */
1126 if ((board_ext_address) && (fw_entry->size == (board_data_size + board_ext_data_size))) {
1129 status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(((A_UINT32)fw_entry->data) + board_data_size), board_ext_data_size);
1131 if (status != A_OK) {
1132 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
1133 A_RELEASE_FIRMWARE(fw_entry);
1137 /* Record the fact that extended board Data IS initialized */
1139 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data_initialized), (A_UCHAR *)¶m, 4));
1141 fw_entry_size = board_data_size;
1145 status = BMIFastDownload(ar->arHifDevice, address, (A_UCHAR *)fw_entry->data, fw_entry_size);
1147 status = BMIWriteMemory(ar->arHifDevice, address, (A_UCHAR *)fw_entry->data, fw_entry_size);
1150 if (status != A_OK) {
1151 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
1152 A_RELEASE_FIRMWARE(fw_entry);
1155 A_RELEASE_FIRMWARE(fw_entry);
1158 #endif /* INIT_MODE_DRV_ENABLED */
1161 ar6000_update_bdaddr(AR_SOFTC_T *ar)
1164 if (setupbtdev != 0) {
1167 if (BMIReadMemory(ar->arHifDevice,
1168 HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (A_UCHAR *)&address, 4) != A_OK)
1170 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for hi_board_data failed\n"));
1174 if (BMIReadMemory(ar->arHifDevice, address + BDATA_BDADDR_OFFSET, (A_UCHAR *)ar->bdaddr, 6) != A_OK)
1176 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for BD address failed\n"));
1179 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BDADDR 0x%x:0x%x:0x%x:0x%x:0x%x:0x%x\n", ar->bdaddr[0],
1180 ar->bdaddr[1], ar->bdaddr[2], ar->bdaddr[3],
1181 ar->bdaddr[4], ar->bdaddr[5]));
1188 ar6000_sysfs_bmi_get_config(AR_SOFTC_T *ar, A_UINT32 mode)
1190 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Requesting device specific configuration\n"));
1192 if (mode == WLAN_INIT_MODE_UDEV) {
1194 const struct firmware *fw_entry;
1196 /* Get config using udev through a script in user space */
1197 sprintf(version, "%2.2x", ar->arVersion.target_ver);
1198 if ((A_REQUEST_FIRMWARE(&fw_entry, version, ((struct device *)ar->osDevInfo.pOSDevice))) != 0)
1200 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Failure to get configuration for target version: %s\n", version));
1204 A_RELEASE_FIRMWARE(fw_entry);
1205 #ifdef INIT_MODE_DRV_ENABLED
1207 /* The config is contained within the driver itself */
1209 A_UINT32 param, options, sleep, address;
1211 /* Temporarily disable system sleep */
1212 address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS;
1213 bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
1215 param |= AR6K_OPTION_SLEEP_DISABLE;
1216 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1218 address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS;
1219 bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
1221 param |= WLAN_SYSTEM_SLEEP_DISABLE_SET(1);
1222 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1223 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("old options: %d, old sleep: %d\n", options, sleep));
1225 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1226 /* Program analog PLL register */
1227 bmifn(BMIWriteSOCRegister(ar->arHifDevice, ANALOG_INTF_BASE_ADDRESS + 0x284, 0xF9104001));
1228 /* Run at 80/88MHz by default */
1229 param = CPU_CLOCK_STANDARD_SET(1);
1231 /* Run at 40/44MHz by default */
1232 param = CPU_CLOCK_STANDARD_SET(0);
1234 address = RTC_BASE_ADDRESS + CPU_CLOCK_ADDRESS;
1235 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1238 if (ar->arTargetType == TARGET_TYPE_AR6002) {
1239 bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (A_UCHAR *)¶m, 4));
1242 /* LPO_CAL.ENABLE = 1 if no external clk is detected */
1244 address = RTC_BASE_ADDRESS + LPO_CAL_ADDRESS;
1245 param = LPO_CAL_ENABLE_SET(1);
1246 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1249 /* Venus2.0: Lower SDIO pad drive strength,
1250 * temporary WAR to avoid SDIO CRC error */
1251 if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1252 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("AR6K: Temporary WAR to avoid SDIO CRC error\n"));
1254 address = GPIO_BASE_ADDRESS + GPIO_PIN10_ADDRESS;
1255 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1257 address = GPIO_BASE_ADDRESS + GPIO_PIN11_ADDRESS;
1258 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1260 address = GPIO_BASE_ADDRESS + GPIO_PIN12_ADDRESS;
1261 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1263 address = GPIO_BASE_ADDRESS + GPIO_PIN13_ADDRESS;
1264 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1267 #ifdef FORCE_INTERNAL_CLOCK
1268 /* Ignore external clock, if any, and force use of internal clock */
1269 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1270 /* hi_ext_clk_detected = 0 */
1272 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (A_UCHAR *)¶m, 4));
1274 /* CLOCK_CONTROL &= ~LF_CLK32 */
1275 address = RTC_BASE_ADDRESS + CLOCK_CONTROL_ADDRESS;
1276 bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
1277 param &= (~CLOCK_CONTROL_LF_CLK32_SET(1));
1278 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1280 #endif /* FORCE_INTERNAL_CLOCK */
1282 /* Transfer Board Data from Target EEPROM to Target RAM */
1283 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1284 /* Determine where in Target RAM to write Board Data */
1285 bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (A_UCHAR *)&address, 4));
1286 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board Data download address: 0x%x\n", address));
1288 /* Write EEPROM data to Target RAM */
1289 if ((ar6000_transfer_bin_file(ar, AR6K_BOARD_DATA_FILE, address, FALSE)) != A_OK) {
1293 /* Record the fact that Board Data IS initialized */
1295 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data_initialized), (A_UCHAR *)¶m, 4));
1297 /* Transfer One time Programmable data */
1298 AR6K_DATA_DOWNLOAD_ADDRESS(address, ar->arVersion.target_ver);
1299 status = ar6000_transfer_bin_file(ar, AR6K_OTP_FILE, address, TRUE);
1300 if (status == A_OK) {
1301 /* Execute the OTP code */
1303 AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver);
1304 bmifn(BMIExecute(ar->arHifDevice, address, ¶m));
1305 } else if (status != A_ENOENT) {
1309 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Programming of board data for chip %d not supported\n", ar->arTargetType));
1313 /* Download Target firmware */
1314 AR6K_DATA_DOWNLOAD_ADDRESS(address, ar->arVersion.target_ver);
1315 if ((ar6000_transfer_bin_file(ar, AR6K_FIRMWARE_FILE, address, TRUE)) != A_OK) {
1319 /* Set starting address for firmware */
1320 AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver);
1321 bmifn(BMISetAppStart(ar->arHifDevice, address));
1323 /* Apply the patches */
1324 AR6K_PATCH_DOWNLOAD_ADDRESS(address, ar->arVersion.target_ver);
1325 if ((ar6000_transfer_bin_file(ar, AR6K_PATCH_FILE, address, FALSE)) != A_OK) {
1330 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dset_list_head), (A_UCHAR *)¶m, 4));
1332 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1333 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1334 /* Reserve 5.5K of RAM */
1336 } else { /* AR6003_REV2_VERSION */
1337 /* Reserve 6.5K of RAM */
1340 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_end_RAM_reserve_sz), (A_UCHAR *)¶m, 4));
1343 /* Restore system sleep */
1344 address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS;
1345 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, sleep));
1347 address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS;
1348 param = options | 0x20;
1349 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1351 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1352 /* Configure GPIO AR6003 UART */
1353 #ifndef CONFIG_AR600x_DEBUG_UART_TX_PIN
1354 #define CONFIG_AR600x_DEBUG_UART_TX_PIN 8
1356 param = CONFIG_AR600x_DEBUG_UART_TX_PIN;
1357 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbg_uart_txpin), (A_UCHAR *)¶m, 4));
1359 #if (CONFIG_AR600x_DEBUG_UART_TX_PIN == 23)
1361 address = GPIO_BASE_ADDRESS + CLOCK_GPIO_ADDRESS;
1362 bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
1363 param |= CLOCK_GPIO_BT_CLK_OUT_EN_SET(1);
1364 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1368 /* Configure GPIO for BT Reset */
1369 #ifdef ATH6KL_CONFIG_GPIO_BT_RESET
1370 #define CONFIG_AR600x_BT_RESET_PIN 0x16
1371 param = CONFIG_AR600x_BT_RESET_PIN;
1372 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_support_pins), (A_UCHAR *)¶m, 4));
1373 #endif /* ATH6KL_CONFIG_GPIO_BT_RESET */
1375 /* Configure UART flow control polarity */
1376 #ifndef CONFIG_ATH6KL_BT_UART_FC_POLARITY
1377 #define CONFIG_ATH6KL_BT_UART_FC_POLARITY 0
1380 #if (CONFIG_ATH6KL_BT_UART_FC_POLARITY == 1)
1381 if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1382 param = ((CONFIG_ATH6KL_BT_UART_FC_POLARITY << 1) & 0x2);
1383 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_pwr_mgmt_params), (A_UCHAR *)¶m, 4));
1385 #endif /* CONFIG_ATH6KL_BT_UART_FC_POLARITY */
1388 #ifdef HTC_RAW_INTERFACE
1389 if (!eppingtest && bypasswmi) {
1390 /* Don't run BMIDone for ART mode and force resetok=0 */
1394 #endif /* HTC_RAW_INTERFACE */
1396 #endif /* INIT_MODE_DRV_ENABLED */
1403 ar6000_configure_target(AR_SOFTC_T *ar)
1406 if (enableuartprint) {
1408 if (BMIWriteMemory(ar->arHifDevice,
1409 HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable),
1413 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enableuartprint failed \n"));
1416 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Serial console prints enabled\n"));
1419 /* Tell target which HTC version it is used*/
1420 param = HTC_PROTOCOL_VERSION;
1421 if (BMIWriteMemory(ar->arHifDevice,
1422 HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest),
1426 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for htc version failed \n"));
1430 #ifdef CONFIG_HOST_TCMD_SUPPORT
1432 ar->arTargetMode = AR6000_TCMD_MODE;
1434 ar->arTargetMode = AR6000_WLAN_MODE;
1437 if (enabletimerwar) {
1440 if (BMIReadMemory(ar->arHifDevice,
1441 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1445 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for enabletimerwar failed \n"));
1449 param |= HI_OPTION_TIMER_WAR;
1451 if (BMIWriteMemory(ar->arHifDevice,
1452 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1456 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enabletimerwar failed \n"));
1459 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Timer WAR enabled\n"));
1462 /* set the firmware mode to STA/IBSS/AP */
1466 if (BMIReadMemory(ar->arHifDevice,
1467 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1471 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for setting fwmode failed \n"));
1475 param |= (fwmode << HI_OPTION_FW_MODE_SHIFT);
1477 if (BMIWriteMemory(ar->arHifDevice,
1478 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1482 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for setting fwmode failed \n"));
1485 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n"));
1488 #ifdef ATH6KL_DISABLE_TARGET_DBGLOGS
1492 if (BMIReadMemory(ar->arHifDevice,
1493 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1497 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for disabling debug logs failed\n"));
1501 param |= HI_OPTION_DISABLE_DBGLOG;
1503 if (BMIWriteMemory(ar->arHifDevice,
1504 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1508 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for HI_OPTION_DISABLE_DBGLOG\n"));
1511 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n"));
1513 #endif /* ATH6KL_DISABLE_TARGET_DBGLOGS */
1516 * Hardcode the address use for the extended board data
1517 * Ideally this should be pre-allocate by the OS at boot time
1518 * But since it is a new feature and board data is loaded
1519 * at init time, we have to workaround this from host.
1520 * It is difficult to patch the firmware boot code,
1521 * but possible in theory.
1523 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1524 param = AR6003_BOARD_EXT_DATA_ADDRESS;
1525 if (BMIWriteMemory(ar->arHifDevice,
1526 HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data),
1530 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for hi_board_ext_data failed \n"));
1536 /* since BMIInit is called in the driver layer, we have to set the block
1537 * size here for the target */
1539 if (A_FAILED(ar6000_set_htc_params(ar->arHifDevice,
1542 0 /* use default number of control buffers */
1547 if (setupbtdev != 0) {
1548 if (A_FAILED(ar6000_set_hci_bridge_flags(ar->arHifDevice,
1558 init_netdev(struct net_device *dev, char *name)
1560 dev->netdev_ops = &ar6000_netdev_ops;
1561 dev->watchdog_timeo = AR6000_TX_TIMEOUT;
1562 dev->wireless_handlers = &ath_iw_handler_def;
1564 ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */
1567 * We need the OS to provide us with more headroom in order to
1568 * perform dix to 802.3, WMI header encap, and the HTC header
1570 if (processDot11Hdr) {
1571 dev->hard_header_len = sizeof(struct ieee80211_qosframe) + sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN + WMI_MAX_TX_META_SZ + LINUX_HACK_FUDGE_FACTOR;
1573 dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) +
1574 sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN + WMI_MAX_TX_META_SZ + LINUX_HACK_FUDGE_FACTOR;
1579 strcpy(dev->name, name);
1582 #ifdef SET_MODULE_OWNER
1583 SET_MODULE_OWNER(dev);
1586 #ifdef CONFIG_CHECKSUM_OFFLOAD
1588 dev->features |= NETIF_F_IP_CSUM; /*advertise kernel capability to do TCP/UDP CSUM offload for IPV4*/
1596 * HTC Event handlers
1599 ar6000_avail_ev(void *context, void *hif_handle)
1602 struct net_device *dev;
1605 int device_index = 0;
1606 HTC_INIT_INFO htcInfo;
1607 #ifdef ATH6K_CONFIG_CFG80211
1608 struct wireless_dev *wdev;
1609 #endif /* ATH6K_CONFIG_CFG80211 */
1610 A_STATUS init_status = A_OK;
1612 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_available\n"));
1614 for (i=0; i < MAX_AR6000; i++) {
1615 if (ar6000_devices[i] == NULL) {
1620 if (i == MAX_AR6000) {
1621 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_available: max devices reached\n"));
1625 /* Save this. It gives a bit better readability especially since */
1626 /* we use another local "i" variable below. */
1629 #ifdef ATH6K_CONFIG_CFG80211
1630 wdev = ar6k_cfg80211_init(NULL);
1632 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: ar6k_cfg80211_init failed\n", __func__));
1635 ar_netif = wdev_priv(wdev);
1637 dev = alloc_etherdev(sizeof(AR_SOFTC_T));
1639 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_available: can't alloc etherdev\n"));
1643 ar_netif = ar6k_priv(dev);
1644 #endif /* ATH6K_CONFIG_CFG80211 */
1646 if (ar_netif == NULL) {
1647 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Can't allocate ar6k priv memory\n", __func__));
1651 A_MEMZERO(ar_netif, sizeof(AR_SOFTC_T));
1652 ar = (AR_SOFTC_T *)ar_netif;
1654 #ifdef ATH6K_CONFIG_CFG80211
1656 wdev->iftype = NL80211_IFTYPE_STATION;
1658 dev = alloc_netdev_mq(0, "wlan%d", ether_setup, 1);
1660 printk(KERN_CRIT "AR6K: no memory for network device instance\n");
1661 ar6k_cfg80211_deinit(ar);
1665 dev->ieee80211_ptr = wdev;
1666 SET_NETDEV_DEV(dev, wiphy_dev(wdev->wiphy));
1668 ar->arNetworkType = INFRA_NETWORK;
1669 #endif /* ATH6K_CONFIG_CFG80211 */
1671 init_netdev(dev, ifname);
1673 #ifdef SET_NETDEV_DEV
1675 HIF_DEVICE_OS_DEVICE_INFO osDevInfo;
1676 A_MEMZERO(&osDevInfo, sizeof(osDevInfo));
1677 if ( A_SUCCESS( HIFConfigureDevice(hif_handle, HIF_DEVICE_GET_OS_DEVICE,
1678 &osDevInfo, sizeof(osDevInfo))) ) {
1679 SET_NETDEV_DEV(dev, osDevInfo.pOSDevice);
1685 ar->arHifDevice = hif_handle;
1686 ar->arWlanState = WLAN_ENABLED;
1687 ar->arDeviceIndex = device_index;
1689 ar->arWlanPowerState = WLAN_POWER_STATE_ON;
1690 ar->arWlanOff = FALSE; /* We are in ON state */
1692 ar->arWowState = WLAN_WOW_STATE_NONE;
1693 ar->arBTOff = TRUE; /* BT chip assumed to be OFF */
1694 ar->arBTSharing = WLAN_CONFIG_BT_SHARING;
1695 ar->arWlanOffConfig = WLAN_CONFIG_WLAN_OFF;
1696 ar->arSuspendConfig = WLAN_CONFIG_PM_SUSPEND;
1697 ar->arWow2Config = WLAN_CONFIG_PM_WOW2;
1698 #endif /* CONFIG_PM */
1700 A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev);
1701 ar->arHBChallengeResp.seqNum = 0;
1702 ar->arHBChallengeResp.outstanding = FALSE;
1703 ar->arHBChallengeResp.missCnt = 0;
1704 ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT;
1705 ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT;
1707 ar6000_init_control_info(ar);
1708 init_waitqueue_head(&arEvent);
1709 sema_init(&ar->arSem, 1);
1710 ar->bIsDestroyProgress = FALSE;
1712 INIT_HTC_PACKET_QUEUE(&ar->amsdu_rx_buffer_queue);
1714 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
1715 A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar);
1716 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
1718 A_INIT_TIMER(&ar->disconnect_timer, disconnect_timer_handler, dev);
1723 ar6000_sysfs_bmi_init(ar);
1727 struct bmi_target_info targ_info;
1729 if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) {
1730 init_status = A_ERROR;
1731 goto avail_ev_failed;
1734 ar->arVersion.target_ver = targ_info.target_ver;
1735 ar->arTargetType = targ_info.target_type;
1737 /* do any target-specific preparation that can be done through BMI */
1738 if (ar6000_prepare_target(ar->arHifDevice,
1739 targ_info.target_type,
1740 targ_info.target_ver) != A_OK) {
1741 init_status = A_ERROR;
1742 goto avail_ev_failed;
1747 if (ar6000_configure_target(ar) != A_OK) {
1748 init_status = A_ERROR;
1749 goto avail_ev_failed;
1752 A_MEMZERO(&htcInfo,sizeof(htcInfo));
1753 htcInfo.pContext = ar;
1754 htcInfo.TargetFailure = ar6000_target_failure;
1756 ar->arHtcTarget = HTCCreate(ar->arHifDevice,&htcInfo);
1758 if (ar->arHtcTarget == NULL) {
1759 init_status = A_ERROR;
1760 goto avail_ev_failed;
1763 spin_lock_init(&ar->arLock);
1766 ar->arWapiEnable = 0;
1770 #ifdef CONFIG_CHECKSUM_OFFLOAD
1772 /*if external frame work is also needed, change and use an extended rxMetaVerion*/
1773 ar->rxMetaVersion=WMI_META_VERSION_2;
1777 #ifdef ATH_AR6K_11N_SUPPORT
1778 if((ar->aggr_cntxt = aggr_init(ar6000_alloc_netbufs)) == NULL) {
1779 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Failed to initialize aggr.\n", __func__));
1780 init_status = A_ERROR;
1781 goto avail_ev_failed;
1784 aggr_register_rx_dispatcher(ar->aggr_cntxt, (void *)dev, ar6000_deliver_frames_to_nw_stack);
1787 HIFClaimDevice(ar->arHifDevice, ar);
1789 /* We only register the device in the global list if we succeed. */
1790 /* If the device is in the global list, it will be destroyed */
1791 /* when the module is unloaded. */
1792 ar6000_devices[device_index] = dev;
1794 /* Don't install the init function if BMI is requested */
1796 ar6000_netdev_ops.ndo_init = ar6000_init;
1798 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("BMI enabled: %d\n", wlaninitmode));
1799 if ((wlaninitmode == WLAN_INIT_MODE_UDEV) ||
1800 (wlaninitmode == WLAN_INIT_MODE_DRV))
1802 A_STATUS status = A_OK;
1804 if ((status = ar6000_sysfs_bmi_get_config(ar, wlaninitmode)) != A_OK)
1806 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_sysfs_bmi_get_config failed\n"));
1809 #ifdef HTC_RAW_INTERFACE
1810 break; /* Don't call ar6000_init for ART */
1813 status = (ar6000_init(dev)==0) ? A_OK : A_ERROR;
1815 if (status != A_OK) {
1816 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_init\n"));
1820 if (status != A_OK) {
1821 init_status = status;
1822 goto avail_ev_failed;
1827 /* This runs the init function if registered */
1828 if (register_netdev(dev)) {
1829 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: register_netdev failed\n"));
1830 ar6000_destroy(dev, 0);
1834 is_netdev_registered = 1;
1836 #ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT
1838 #endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
1839 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_avail: name=%s hifdevice=0x%lx, dev=0x%lx (%d), ar=0x%lx\n",
1840 dev->name, (unsigned long)ar->arHifDevice, (unsigned long)dev, device_index,
1841 (unsigned long)ar));
1844 if (A_FAILED(init_status)) {
1846 ar6000_sysfs_bmi_deinit(ar);
1853 static void ar6000_target_failure(void *Instance, A_STATUS Status)
1855 AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
1856 WMI_TARGET_ERROR_REPORT_EVENT errEvent;
1857 static A_BOOL sip = FALSE;
1859 if (Status != A_OK) {
1861 printk(KERN_ERR "ar6000_target_failure: target asserted \n");
1863 if (timer_pending(&ar->arHBChallengeResp.timer)) {
1864 A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
1867 /* try dumping target assertion information (if any) */
1868 ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType);
1871 * Fetch the logs from the target via the diagnostic
1874 ar6000_dbglog_get_debug_logs(ar);
1876 /* Report the error only once */
1879 errEvent.errorVal = WMI_TARGET_COM_ERR |
1880 WMI_TARGET_FATAL_ERR;
1881 ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
1882 (A_UINT8 *)&errEvent,
1883 sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
1889 ar6000_unavail_ev(void *context, void *hif_handle)
1891 AR_SOFTC_T *ar = (AR_SOFTC_T *)context;
1892 /* NULL out it's entry in the global list */
1893 ar6000_devices[ar->arDeviceIndex] = NULL;
1894 ar6000_destroy(ar->arNetDev, 1);
1900 ar6000_restart_endpoint(struct net_device *dev)
1902 A_STATUS status = A_OK;
1903 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
1907 if ( (status=ar6000_configure_target(ar))!=A_OK)
1909 if ( (status=ar6000_sysfs_bmi_get_config(ar, wlaninitmode)) != A_OK)
1911 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_sysfs_bmi_get_config failed\n"));
1915 status = (ar6000_init(dev)==0) ? A_OK : A_ERROR;
1921 if (ar->arSsidLen && ar->arWlanState == WLAN_ENABLED) {
1922 ar6000_connect_to_ap(ar);
1930 ar6000_devices[ar->arDeviceIndex] = NULL;
1931 ar6000_destroy(ar->arNetDev, 1);
1935 ar6000_stop_endpoint(struct net_device *dev, A_BOOL keepprofile, A_BOOL getdbglogs)
1937 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
1939 /* Stop the transmit queues */
1940 netif_stop_queue(dev);
1942 /* Disable the target and the interrupts associated with it */
1943 if (ar->arWmiReady == TRUE)
1947 if (ar->arConnected == TRUE || ar->arConnectPending == TRUE)
1949 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): Disconnect\n", __func__));
1951 AR6000_SPIN_LOCK(&ar->arLock, 0);
1952 ar6000_init_profile_info(ar);
1953 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
1955 wmi_disconnect_cmd(ar->arWmi);
1958 A_UNTIMEOUT(&ar->disconnect_timer);
1961 ar6000_dbglog_get_debug_logs(ar);
1964 ar->arWmiReady = FALSE;
1965 wmi_shutdown(ar->arWmi);
1966 ar->arWmiEnabled = FALSE;
1969 * After wmi_shudown all WMI events will be dropped.
1970 * We need to cleanup the buffers allocated in AP mode
1971 * and give disconnect notification to stack, which usually
1972 * happens in the disconnect_event.
1973 * Simulate the disconnect_event by calling the function directly.
1974 * Sometimes disconnect_event will be received when the debug logs
1977 if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) {
1978 if(ar->arNetworkType & AP_NETWORK) {
1979 ar6000_disconnect_event(ar, DISCONNECT_CMD, bcast_mac, 0, NULL, 0);
1981 ar6000_disconnect_event(ar, DISCONNECT_CMD, ar->arBssid, 0, NULL, 0);
1983 ar->arConnected = FALSE;
1984 ar->arConnectPending = FALSE;
1987 ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
1988 ar->user_key_ctrl = 0;
1992 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): WMI stopped\n", __func__));
1996 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): WMI not ready 0x%lx 0x%lx\n",
1997 __func__, (unsigned long) ar, (unsigned long) ar->arWmi));
1999 /* Shut down WMI if we have started it */
2000 if(ar->arWmiEnabled == TRUE)
2002 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): Shut down WMI\n", __func__));
2003 wmi_shutdown(ar->arWmi);
2004 ar->arWmiEnabled = FALSE;
2009 if (ar->arHtcTarget != NULL) {
2010 #ifdef EXPORT_HCI_BRIDGE_INTERFACE
2011 if (NULL != ar6kHciTransCallbacks.cleanupTransport) {
2012 ar6kHciTransCallbacks.cleanupTransport(NULL);
2015 // FIXME: workaround to reset BT's UART baud rate to default
2016 if (NULL != ar->exitCallback) {
2017 AR3K_CONFIG_INFO ar3kconfig;
2020 A_MEMZERO(&ar3kconfig,sizeof(ar3kconfig));
2021 ar6000_set_default_ar3kconfig(ar, (void *)&ar3kconfig);
2022 status = ar->exitCallback(&ar3kconfig);
2023 if (A_OK != status) {
2024 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to reset AR3K baud rate! \n"));
2029 ar6000_cleanup_hci(ar);
2031 #ifdef EXPORT_HCI_PAL_INTERFACE
2032 if (setuphcipal && (NULL != ar6kHciPalCallbacks_g.cleanupTransport)) {
2033 ar6kHciPalCallbacks_g.cleanupTransport(ar);
2036 /* cleanup hci pal driver data structures */
2038 ar6k_cleanup_hci_pal(ar);
2040 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Shutting down HTC .... \n"));
2042 HTCStop(ar->arHtcTarget);
2046 /* try to reset the device if we can
2047 * The driver may have been configure NOT to reset the target during
2048 * a debug session */
2049 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Attempting to reset target on instance destroy.... \n"));
2050 if (ar->arHifDevice != NULL) {
2051 A_BOOL coldReset = (ar->arTargetType == TARGET_TYPE_AR6003) ? TRUE: FALSE;
2052 ar6000_reset_device(ar->arHifDevice, ar->arTargetType, TRUE, coldReset);
2055 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Host does not want target reset. \n"));
2057 /* Done with cookies */
2058 ar6000_cookie_cleanup(ar);
2061 * We need to differentiate between the surprise and planned removal of the
2062 * device because of the following consideration:
2063 * - In case of surprise removal, the hcd already frees up the pending
2064 * for the device and hence there is no need to unregister the function
2065 * driver inorder to get these requests. For planned removal, the function
2066 * driver has to explictly unregister itself to have the hcd return all the
2067 * pending requests before the data structures for the devices are freed up.
2068 * Note that as per the current implementation, the function driver will
2069 * end up releasing all the devices since there is no API to selectively
2070 * release a particular device.
2071 * - Certain commands issued to the target can be skipped for surprise
2072 * removal since they will anyway not go through.
2075 ar6000_destroy(struct net_device *dev, unsigned int unregister)
2079 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("+ar6000_destroy \n"));
2081 if((dev == NULL) || ((ar = ar6k_priv(dev)) == NULL))
2083 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s(): Failed to get device structure.\n", __func__));
2087 ar->bIsDestroyProgress = TRUE;
2089 if (down_interruptible(&ar->arSem)) {
2090 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s(): down_interruptible failed \n", __func__));
2094 if (ar->arWlanPowerState != WLAN_POWER_STATE_CUT_PWR) {
2095 /* only stop endpoint if we are not stop it in suspend_ev */
2096 ar6000_stop_endpoint(dev, FALSE, TRUE);
2098 /* clear up the platform power state before rmmod */
2099 plat_setup_power(1,0);
2102 ar->arWlanState = WLAN_DISABLED;
2103 if (ar->arHtcTarget != NULL) {
2105 HTCDestroy(ar->arHtcTarget);
2107 if (ar->arHifDevice != NULL) {
2108 /*release the device so we do not get called back on remove incase we
2109 * we're explicity destroyed by module unload */
2110 HIFReleaseDevice(ar->arHifDevice);
2111 HIFShutDownDevice(ar->arHifDevice);
2113 #ifdef ATH_AR6K_11N_SUPPORT
2114 aggr_module_destroy(ar->aggr_cntxt);
2117 /* Done with cookies */
2118 ar6000_cookie_cleanup(ar);
2120 /* cleanup any allocated AMSDU buffers */
2121 ar6000_cleanup_amsdu_rxbufs(ar);
2124 ar6000_sysfs_bmi_deinit(ar);
2130 /* Clear the tx counters */
2131 memset(tx_attempt, 0, sizeof(tx_attempt));
2132 memset(tx_post, 0, sizeof(tx_post));
2133 memset(tx_complete, 0, sizeof(tx_complete));
2135 #ifdef HTC_RAW_INTERFACE
2137 A_FREE(ar->arRawHtc);
2138 ar->arRawHtc = NULL;
2141 /* Free up the device data structure */
2142 if (unregister && is_netdev_registered) {
2143 unregister_netdev(dev);
2144 is_netdev_registered = 0;
2152 #ifdef ATH6K_CONFIG_CFG80211
2153 ar6k_cfg80211_deinit(ar);
2154 #endif /* ATH6K_CONFIG_CFG80211 */
2156 #ifdef CONFIG_AP_VIRTUL_ADAPTER_SUPPORT
2157 ar6000_remove_ap_interface();
2158 #endif /*CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
2160 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("-ar6000_destroy \n"));
2163 static void disconnect_timer_handler(unsigned long ptr)
2165 struct net_device *dev = (struct net_device *)ptr;
2166 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2168 A_UNTIMEOUT(&ar->disconnect_timer);
2170 ar6000_init_profile_info(ar);
2171 wmi_disconnect_cmd(ar->arWmi);
2174 static void ar6000_detect_error(unsigned long ptr)
2176 struct net_device *dev = (struct net_device *)ptr;
2177 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2178 WMI_TARGET_ERROR_REPORT_EVENT errEvent;
2180 AR6000_SPIN_LOCK(&ar->arLock, 0);
2182 if (ar->arHBChallengeResp.outstanding) {
2183 ar->arHBChallengeResp.missCnt++;
2185 ar->arHBChallengeResp.missCnt = 0;
2188 if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) {
2189 /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */
2190 ar->arHBChallengeResp.missCnt = 0;
2191 ar->arHBChallengeResp.seqNum = 0;
2192 errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR;
2193 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
2194 ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
2195 (A_UINT8 *)&errEvent,
2196 sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
2200 /* Generate the sequence number for the next challenge */
2201 ar->arHBChallengeResp.seqNum++;
2202 ar->arHBChallengeResp.outstanding = TRUE;
2204 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
2206 /* Send the challenge on the control channel */
2207 if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) {
2208 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to send heart beat challenge\n"));
2212 /* Reschedule the timer for the next challenge */
2213 A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
2216 void ar6000_init_profile_info(AR_SOFTC_T *ar)
2219 A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
2222 case HI_OPTION_FW_MODE_IBSS:
2223 ar->arNetworkType = ar->arNextMode = ADHOC_NETWORK;
2225 case HI_OPTION_FW_MODE_BSS_STA:
2226 ar->arNetworkType = ar->arNextMode = INFRA_NETWORK;
2228 case HI_OPTION_FW_MODE_AP:
2229 ar->arNetworkType = ar->arNextMode = AP_NETWORK;
2233 ar->arDot11AuthMode = OPEN_AUTH;
2234 ar->arAuthMode = NONE_AUTH;
2235 ar->arPairwiseCrypto = NONE_CRYPT;
2236 ar->arPairwiseCryptoLen = 0;
2237 ar->arGroupCrypto = NONE_CRYPT;
2238 ar->arGroupCryptoLen = 0;
2239 A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
2240 A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
2241 A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
2242 ar->arBssChannel = 0;
2243 ar->arConnected = FALSE;
2247 ar6000_init_control_info(AR_SOFTC_T *ar)
2249 ar->arWmiEnabled = FALSE;
2250 ar6000_init_profile_info(ar);
2251 ar->arDefTxKeyIndex = 0;
2252 A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
2253 ar->arChannelHint = 0;
2254 ar->arListenIntervalT = A_DEFAULT_LISTEN_INTERVAL;
2255 ar->arListenIntervalB = 0;
2256 ar->arVersion.host_ver = AR6K_SW_VERSION;
2259 ar->arTxPwrSet = FALSE;
2261 ar->arBeaconInterval = 0;
2263 ar->arMaxRetries = 0;
2264 ar->arWmmEnabled = TRUE;
2266 ar->scan_triggered = 0;
2267 A_MEMZERO(&ar->scParams, sizeof(ar->scParams));
2268 ar->scParams.shortScanRatio = WMI_SHORTSCANRATIO_DEFAULT;
2269 ar->scParams.scanCtrlFlags = DEFAULT_SCAN_CTRL_FLAGS;
2271 /* Initialize the AP mode state info */
2274 A_MEMZERO((A_UINT8 *)ar->sta_list, AP_MAX_NUM_STA * sizeof(sta_t));
2276 /* init the Mutexes */
2277 A_MUTEX_INIT(&ar->mcastpsqLock);
2279 /* Init the PS queues */
2280 for (ctr=0; ctr < AP_MAX_NUM_STA ; ctr++) {
2281 A_MUTEX_INIT(&ar->sta_list[ctr].psqLock);
2282 A_NETBUF_QUEUE_INIT(&ar->sta_list[ctr].psq);
2285 ar->ap_profile_flag = 0;
2286 A_NETBUF_QUEUE_INIT(&ar->mcastpsq);
2288 A_MEMCPY(ar->ap_country_code, DEF_AP_COUNTRY_CODE, 3);
2289 ar->ap_wmode = DEF_AP_WMODE_G;
2290 ar->ap_dtim_period = DEF_AP_DTIM;
2291 ar->ap_beacon_interval = DEF_BEACON_INTERVAL;
2296 ar6000_open(struct net_device *dev)
2298 unsigned long flags;
2299 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2301 spin_lock_irqsave(&ar->arLock, flags);
2303 #ifdef ATH6K_CONFIG_CFG80211
2304 if(ar->arWlanState == WLAN_DISABLED) {
2305 ar->arWlanState = WLAN_ENABLED;
2307 #endif /* ATH6K_CONFIG_CFG80211 */
2309 if( ar->arConnected || bypasswmi) {
2310 netif_carrier_on(dev);
2311 /* Wake up the queues */
2312 netif_wake_queue(dev);
2315 netif_carrier_off(dev);
2317 spin_unlock_irqrestore(&ar->arLock, flags);
2322 ar6000_close(struct net_device *dev)
2324 #ifdef ATH6K_CONFIG_CFG80211
2325 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2326 #endif /* ATH6K_CONFIG_CFG80211 */
2327 netif_stop_queue(dev);
2329 #ifdef ATH6K_CONFIG_CFG80211
2330 AR6000_SPIN_LOCK(&ar->arLock, 0);
2331 if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) {
2332 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
2333 wmi_disconnect_cmd(ar->arWmi);
2335 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
2338 if(ar->arWmiReady == TRUE) {
2339 if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0,
2340 0, 0, 0, 0, 0, 0, 0, 0) != A_OK) {
2343 ar->arWlanState = WLAN_DISABLED;
2345 #endif /* ATH6K_CONFIG_CFG80211 */
2350 /* connect to a service */
2351 static A_STATUS ar6000_connectservice(AR_SOFTC_T *ar,
2352 HTC_SERVICE_CONNECT_REQ *pConnect,
2356 HTC_SERVICE_CONNECT_RESP response;
2360 A_MEMZERO(&response,sizeof(response));
2362 status = HTCConnectService(ar->arHtcTarget,
2366 if (A_FAILED(status)) {
2367 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" Failed to connect to %s service status:%d \n",
2371 switch (pConnect->ServiceID) {
2372 case WMI_CONTROL_SVC :
2373 if (ar->arWmiEnabled) {
2374 /* set control endpoint for WMI use */
2375 wmi_set_control_ep(ar->arWmi, response.Endpoint);
2377 /* save EP for fast lookup */
2378 ar->arControlEp = response.Endpoint;
2380 case WMI_DATA_BE_SVC :
2381 arSetAc2EndpointIDMap(ar, WMM_AC_BE, response.Endpoint);
2383 case WMI_DATA_BK_SVC :
2384 arSetAc2EndpointIDMap(ar, WMM_AC_BK, response.Endpoint);
2386 case WMI_DATA_VI_SVC :
2387 arSetAc2EndpointIDMap(ar, WMM_AC_VI, response.Endpoint);
2389 case WMI_DATA_VO_SVC :
2390 arSetAc2EndpointIDMap(ar, WMM_AC_VO, response.Endpoint);
2393 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ServiceID not mapped %d\n", pConnect->ServiceID));
2403 void ar6000_TxDataCleanup(AR_SOFTC_T *ar)
2405 /* flush all the data (non-control) streams
2406 * we only flush packets that are tagged as data, we leave any control packets that
2407 * were in the TX queues alone */
2408 HTCFlushEndpoint(ar->arHtcTarget,
2409 arAc2EndpointID(ar, WMM_AC_BE),
2411 HTCFlushEndpoint(ar->arHtcTarget,
2412 arAc2EndpointID(ar, WMM_AC_BK),
2414 HTCFlushEndpoint(ar->arHtcTarget,
2415 arAc2EndpointID(ar, WMM_AC_VI),
2417 HTCFlushEndpoint(ar->arHtcTarget,
2418 arAc2EndpointID(ar, WMM_AC_VO),
2423 ar6000_ac2_endpoint_id ( void * devt, A_UINT8 ac)
2425 AR_SOFTC_T *ar = (AR_SOFTC_T *) devt;
2426 return(arAc2EndpointID(ar, ac));
2430 ar6000_endpoint_id2_ac(void * devt, HTC_ENDPOINT_ID ep )
2432 AR_SOFTC_T *ar = (AR_SOFTC_T *) devt;
2433 return(arEndpoint2Ac(ar, ep ));
2436 /* This function does one time initialization for the lifetime of the device */
2437 int ar6000_init(struct net_device *dev)
2444 #if defined(INIT_MODE_DRV_ENABLED) && defined(ENABLE_COEXISTENCE)
2445 WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD sbcb_cmd;
2446 WMI_SET_BTCOEX_FE_ANT_CMD sbfa_cmd;
2447 #endif /* INIT_MODE_DRV_ENABLED && ENABLE_COEXISTENCE */
2449 if((ar = ar6k_priv(dev)) == NULL)
2454 if (wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) {
2456 ar6000_update_bdaddr(ar);
2458 if (enablerssicompensation) {
2459 ar6000_copy_cust_data_from_target(ar->arHifDevice, ar->arTargetType);
2460 read_rssi_compensation_param(ar);
2461 for (i=-95; i<=0; i++) {
2462 rssi_compensation_table[0-i] = rssi_compensation_calc(ar,i);
2470 /* Do we need to finish the BMI phase */
2471 if ((wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) &&
2472 (BMIDone(ar->arHifDevice) != A_OK))
2475 goto ar6000_init_done;
2481 if (ar->arVersion.host_ver != ar->arVersion.target_ver) {
2482 A_PRINTF("WARNING: Host version 0x%x does not match Target "
2484 ar->arVersion.host_ver, ar->arVersion.target_ver);
2488 /* Indicate that WMI is enabled (although not ready yet) */
2489 ar->arWmiEnabled = TRUE;
2490 if ((ar->arWmi = wmi_init((void *) ar)) == NULL)
2492 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Failed to initialize WMI.\n", __func__));
2494 goto ar6000_init_done;
2497 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Got WMI @ 0x%lx.\n", __func__,
2498 (unsigned long) ar->arWmi));
2502 HTC_SERVICE_CONNECT_REQ connect;
2504 /* the reason we have to wait for the target here is that the driver layer
2505 * has to init BMI in order to set the host block size,
2507 status = HTCWaitTarget(ar->arHtcTarget);
2509 if (A_FAILED(status)) {
2513 A_MEMZERO(&connect,sizeof(connect));
2514 /* meta data is unused for now */
2515 connect.pMetaData = NULL;
2516 connect.MetaDataLength = 0;
2517 /* these fields are the same for all service endpoints */
2518 connect.EpCallbacks.pContext = ar;
2519 connect.EpCallbacks.EpTxCompleteMultiple = ar6000_tx_complete;
2520 connect.EpCallbacks.EpRecv = ar6000_rx;
2521 connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill;
2522 connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full;
2523 /* set the max queue depth so that our ar6000_tx_queue_full handler gets called.
2524 * Linux has the peculiarity of not providing flow control between the
2525 * NIC and the network stack. There is no API to indicate that a TX packet
2526 * was sent which could provide some back pressure to the network stack.
2527 * Under linux you would have to wait till the network stack consumed all sk_buffs
2528 * before any back-flow kicked in. Which isn't very friendly.
2529 * So we have to manage this ourselves */
2530 connect.MaxSendQueueDepth = MAX_DEFAULT_SEND_QUEUE_DEPTH;
2531 connect.EpCallbacks.RecvRefillWaterMark = AR6000_MAX_RX_BUFFERS / 4; /* set to 25 % */
2532 if (0 == connect.EpCallbacks.RecvRefillWaterMark) {
2533 connect.EpCallbacks.RecvRefillWaterMark++;
2535 /* connect to control service */
2536 connect.ServiceID = WMI_CONTROL_SVC;
2537 status = ar6000_connectservice(ar,
2540 if (A_FAILED(status)) {
2544 connect.LocalConnectionFlags |= HTC_LOCAL_CONN_FLAGS_ENABLE_SEND_BUNDLE_PADDING;
2545 /* limit the HTC message size on the send path, although we can receive A-MSDU frames of
2546 * 4K, we will only send ethernet-sized (802.3) frames on the send path. */
2547 connect.MaxSendMsgSize = WMI_MAX_TX_DATA_FRAME_LENGTH;
2549 /* to reduce the amount of committed memory for larger A_MSDU frames, use the recv-alloc threshold
2550 * mechanism for larger packets */
2551 connect.EpCallbacks.RecvAllocThreshold = AR6000_BUFFER_SIZE;
2552 connect.EpCallbacks.EpRecvAllocThresh = ar6000_alloc_amsdu_rxbuf;
2554 /* for the remaining data services set the connection flag to reduce dribbling,
2555 * if configured to do so */
2556 if (reduce_credit_dribble) {
2557 connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE;
2558 /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value
2560 connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
2561 connect.ConnectionFlags |=
2562 ((A_UINT16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
2564 /* connect to best-effort service */
2565 connect.ServiceID = WMI_DATA_BE_SVC;
2567 status = ar6000_connectservice(ar,
2570 if (A_FAILED(status)) {
2574 /* connect to back-ground
2575 * map this to WMI LOW_PRI */
2576 connect.ServiceID = WMI_DATA_BK_SVC;
2577 status = ar6000_connectservice(ar,
2580 if (A_FAILED(status)) {
2584 /* connect to Video service, map this to
2586 connect.ServiceID = WMI_DATA_VI_SVC;
2587 status = ar6000_connectservice(ar,
2590 if (A_FAILED(status)) {
2594 /* connect to VO service, this is currently not
2595 * mapped to a WMI priority stream due to historical reasons.
2596 * WMI originally defined 3 priorities over 3 mailboxes
2597 * We can change this when WMI is reworked so that priorities are not
2598 * dependent on mailboxes */
2599 connect.ServiceID = WMI_DATA_VO_SVC;
2600 status = ar6000_connectservice(ar,
2603 if (A_FAILED(status)) {
2607 A_ASSERT(arAc2EndpointID(ar,WMM_AC_BE) != 0);
2608 A_ASSERT(arAc2EndpointID(ar,WMM_AC_BK) != 0);
2609 A_ASSERT(arAc2EndpointID(ar,WMM_AC_VI) != 0);
2610 A_ASSERT(arAc2EndpointID(ar,WMM_AC_VO) != 0);
2612 /* setup access class priority mappings */
2613 ar->arAcStreamPriMap[WMM_AC_BK] = 0; /* lowest */
2614 ar->arAcStreamPriMap[WMM_AC_BE] = 1; /* */
2615 ar->arAcStreamPriMap[WMM_AC_VI] = 2; /* */
2616 ar->arAcStreamPriMap[WMM_AC_VO] = 3; /* highest */
2618 #ifdef EXPORT_HCI_BRIDGE_INTERFACE
2619 if (setuphci && (NULL != ar6kHciTransCallbacks.setupTransport)) {
2620 HCI_TRANSPORT_MISC_HANDLES hciHandles;
2622 hciHandles.netDevice = ar->arNetDev;
2623 hciHandles.hifDevice = ar->arHifDevice;
2624 hciHandles.htcHandle = ar->arHtcTarget;
2625 status = (A_STATUS)(ar6kHciTransCallbacks.setupTransport(&hciHandles));
2630 status = ar6000_setup_hci(ar);
2633 #ifdef EXPORT_HCI_PAL_INTERFACE
2634 if (setuphcipal && (NULL != ar6kHciPalCallbacks_g.setupTransport))
2635 status = ar6kHciPalCallbacks_g.setupTransport(ar);
2638 status = ar6k_setup_hci_pal(ar);
2643 if (A_FAILED(status)) {
2645 goto ar6000_init_done;
2649 * give our connected endpoints some buffers
2652 ar6000_rx_refill(ar, ar->arControlEp);
2653 ar6000_rx_refill(ar, arAc2EndpointID(ar,WMM_AC_BE));
2656 * We will post the receive buffers only for SPE or endpoint ping testing so we are
2657 * making it conditional on the 'bypasswmi' flag.
2660 ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_BK));
2661 ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_VI));
2662 ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_VO));
2665 /* allocate some buffers that handle larger AMSDU frames */
2666 ar6000_refill_amsdu_rxbufs(ar,AR6000_MAX_AMSDU_RX_BUFFERS);
2668 /* setup credit distribution */
2669 ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo);
2671 /* Since cookies are used for HTC transports, they should be */
2672 /* initialized prior to enabling HTC. */
2673 ar6000_cookie_init(ar);
2676 status = HTCStart(ar->arHtcTarget);
2678 if (status != A_OK) {
2679 if (ar->arWmiEnabled == TRUE) {
2680 wmi_shutdown(ar->arWmi);
2681 ar->arWmiEnabled = FALSE;
2684 ar6000_cookie_cleanup(ar);
2686 goto ar6000_init_done;
2690 /* Wait for Wmi event to be ready */
2691 timeleft = wait_event_interruptible_timeout(arEvent,
2692 (ar->arWmiReady == TRUE), wmitimeout * HZ);
2694 if (ar->arVersion.abi_ver != AR6K_ABI_VERSION) {
2695 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ABI Version mismatch: Host(0x%x), Target(0x%x)\n", AR6K_ABI_VERSION, ar->arVersion.abi_ver));
2696 #ifndef ATH6K_SKIP_ABI_VERSION_CHECK
2698 goto ar6000_init_done;
2699 #endif /* ATH6K_SKIP_ABI_VERSION_CHECK */
2702 if(!timeleft || signal_pending(current))
2704 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI is not ready or wait was interrupted\n"));
2706 goto ar6000_init_done;
2709 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() WMI is ready\n", __func__));
2711 /* Communicate the wmi protocol verision to the target */
2712 if ((ar6000_set_host_app_area(ar)) != A_OK) {
2713 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the host app area\n"));
2716 /* configure the device for rx dot11 header rules 0,0 are the default values
2717 * therefore this command can be skipped if the inputs are 0,FALSE,FALSE.Required
2718 if checksum offload is needed. Set RxMetaVersion to 2*/
2719 if ((wmi_set_rx_frame_format_cmd(ar->arWmi,ar->rxMetaVersion, processDot11Hdr, processDot11Hdr)) != A_OK) {
2720 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the rx frame format.\n"));
2723 #if defined(INIT_MODE_DRV_ENABLED) && defined(ENABLE_COEXISTENCE)
2724 /* Configure the type of BT collocated with WLAN */
2725 A_MEMZERO(&sbcb_cmd, sizeof(WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD));
2726 #ifdef CONFIG_AR600x_BT_QCOM
2727 sbcb_cmd.btcoexCoLocatedBTdev = 1;
2728 #elif defined(CONFIG_AR600x_BT_CSR)
2729 sbcb_cmd.btcoexCoLocatedBTdev = 2;
2730 #elif defined(CONFIG_AR600x_BT_AR3001)
2731 sbcb_cmd.btcoexCoLocatedBTdev = 3;
2733 #error Unsupported Bluetooth Type
2734 #endif /* Collocated Bluetooth Type */
2736 if ((wmi_set_btcoex_colocated_bt_dev_cmd(ar->arWmi, &sbcb_cmd)) != A_OK)
2738 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set collocated BT type\n"));
2741 /* Configure the type of BT collocated with WLAN */
2742 A_MEMZERO(&sbfa_cmd, sizeof(WMI_SET_BTCOEX_FE_ANT_CMD));
2743 #ifdef CONFIG_AR600x_DUAL_ANTENNA
2744 sbfa_cmd.btcoexFeAntType = 2;
2745 #elif defined(CONFIG_AR600x_SINGLE_ANTENNA)
2746 sbfa_cmd.btcoexFeAntType = 1;
2748 #error Unsupported Front-End Antenna Configuration
2749 #endif /* AR600x Front-End Antenna Configuration */
2751 if ((wmi_set_btcoex_fe_ant_cmd(ar->arWmi, &sbfa_cmd)) != A_OK) {
2752 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set fornt end antenna configuration\n"));
2754 #endif /* INIT_MODE_DRV_ENABLED && ENABLE_COEXISTENCE */
2757 ar->arNumDataEndPts = 1;
2760 /* for tests like endpoint ping, the MAC address needs to be non-zero otherwise
2761 * the data path through a raw socket is disabled */
2762 dev->dev_addr[0] = 0x00;
2763 dev->dev_addr[1] = 0x01;
2764 dev->dev_addr[2] = 0x02;
2765 dev->dev_addr[3] = 0xAA;
2766 dev->dev_addr[4] = 0xBB;
2767 dev->dev_addr[5] = 0xCC;
2779 ar6000_bitrate_rx(void *devt, A_INT32 rateKbps)
2781 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
2783 ar->arBitRate = rateKbps;
2788 ar6000_ratemask_rx(void *devt, A_UINT32 ratemask)
2790 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
2792 ar->arRateMask = ratemask;
2797 ar6000_txPwr_rx(void *devt, A_UINT8 txPwr)
2799 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
2801 ar->arTxPwr = txPwr;
2807 ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList)
2809 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
2811 A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (A_UINT16));
2812 ar->arNumChannels = numChan;
2818 ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, A_UINT32 * mapNo)
2820 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2822 ATH_MAC_HDR *macHdr;
2826 datap = A_NETBUF_DATA(skb);
2827 macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR));
2828 if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) {
2833 for (i = 0; i < ar->arNodeNum; i ++) {
2834 if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) {
2836 ar->arNodeMap[i].txPending ++;
2837 return ar->arNodeMap[i].epId;
2840 if ((eptMap == -1) && !ar->arNodeMap[i].txPending) {
2846 eptMap = ar->arNodeNum;
2848 A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM);
2851 A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN);
2853 for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) {
2854 if (!ar->arTxPending[i]) {
2855 ar->arNodeMap[eptMap].epId = i;
2858 // No free endpoint is available, start redistribution on the inuse endpoints.
2859 if (i == ENDPOINT_5) {
2860 ar->arNodeMap[eptMap].epId = ar->arNexEpId;
2862 if (ar->arNexEpId > ENDPOINT_5) {
2863 ar->arNexEpId = ENDPOINT_2;
2868 (*mapNo) = eptMap + 1;
2869 ar->arNodeMap[eptMap].txPending ++;
2871 return ar->arNodeMap[eptMap].epId;
2875 static void ar6000_dump_skb(struct sk_buff *skb)
2878 for (ch = A_NETBUF_DATA(skb);
2879 (unsigned long)ch < ((unsigned long)A_NETBUF_DATA(skb) +
2880 A_NETBUF_LEN(skb)); ch++)
2882 AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("%2.2x ", *ch));
2884 AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("\n"));
2888 #ifdef HTC_TEST_SEND_PKTS
2889 static void DoHTCSendPktsTest(AR_SOFTC_T *ar, int MapNo, HTC_ENDPOINT_ID eid, struct sk_buff *skb);
2893 ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
2895 #define AC_NOT_MAPPED 99
2896 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2897 A_UINT8 ac = AC_NOT_MAPPED;
2898 HTC_ENDPOINT_ID eid = ENDPOINT_UNUSED;
2901 struct ar_cookie *cookie;
2902 A_BOOL checkAdHocPsMapping = FALSE,bMoreData = FALSE;
2903 HTC_TX_TAG htc_tag = AR6K_DATA_PKT_TAG;
2904 A_UINT8 dot11Hdr = processDot11Hdr;
2906 if (ar->arWowState != WLAN_WOW_STATE_NONE) {
2910 #endif /* CONFIG_PM */
2912 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar6000_data_tx start - skb=0x%lx, data=0x%lx, len=0x%x\n",
2913 (unsigned long)skb, (unsigned long)A_NETBUF_DATA(skb),
2914 A_NETBUF_LEN(skb)));
2916 /* If target is not associated */
2917 if( (!ar->arConnected && !bypasswmi)
2918 #ifdef CONFIG_HOST_TCMD_SUPPORT
2919 /* TCMD doesnt support any data, free the buf and return */
2920 || (ar->arTargetMode == AR6000_TCMD_MODE)
2929 if (ar->arWmiReady == FALSE && bypasswmi == 0) {
2933 #ifdef BLOCK_TX_PATH_FLAG
2937 #endif /* BLOCK_TX_PATH_FLAG */
2939 /* AP mode Power save processing */
2940 /* If the dst STA is in sleep state, queue the pkt in its PS queue */
2942 if (ar->arNetworkType == AP_NETWORK) {
2943 ATH_MAC_HDR *datap = (ATH_MAC_HDR *)A_NETBUF_DATA(skb);
2946 /* If the dstMac is a Multicast address & atleast one of the
2947 * associated STA is in PS mode, then queue the pkt to the
2950 if (IEEE80211_IS_MULTICAST(datap->dstMac)) {
2952 A_BOOL qMcast=FALSE;
2955 for (ctr=0; ctr<AP_MAX_NUM_STA; ctr++) {
2956 if (STA_IS_PWR_SLEEP((&ar->sta_list[ctr]))) {
2962 /* If this transmit is not because of a Dtim Expiry q it */
2963 if (ar->DTIMExpired == FALSE) {
2964 A_BOOL isMcastqEmpty = FALSE;
2966 A_MUTEX_LOCK(&ar->mcastpsqLock);
2967 isMcastqEmpty = A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq);
2968 A_NETBUF_ENQUEUE(&ar->mcastpsq, skb);
2969 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
2971 /* If this is the first Mcast pkt getting queued
2972 * indicate to the target to set the BitmapControl LSB
2975 if (isMcastqEmpty) {
2976 wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 1);
2980 /* This transmit is because of Dtim expiry. Determine if
2981 * MoreData bit has to be set.
2983 A_MUTEX_LOCK(&ar->mcastpsqLock);
2984 if(!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) {
2987 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
2991 conn = ieee80211_find_conn(ar, datap->dstMac);
2993 if (STA_IS_PWR_SLEEP(conn)) {
2994 /* If this transmit is not because of a PsPoll q it*/
2995 if (!STA_IS_PS_POLLED(conn)) {
2996 A_BOOL isPsqEmpty = FALSE;
2997 /* Queue the frames if the STA is sleeping */
2998 A_MUTEX_LOCK(&conn->psqLock);
2999 isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq);
3000 A_NETBUF_ENQUEUE(&conn->psq, skb);
3001 A_MUTEX_UNLOCK(&conn->psqLock);
3003 /* If this is the first pkt getting queued
3004 * for this STA, update the PVB for this STA
3007 wmi_set_pvb_cmd(ar->arWmi, conn->aid, 1);
3012 /* This tx is because of a PsPoll. Determine if
3013 * MoreData bit has to be set
3015 A_MUTEX_LOCK(&conn->psqLock);
3016 if (!A_NETBUF_QUEUE_EMPTY(&conn->psq)) {
3019 A_MUTEX_UNLOCK(&conn->psqLock);
3024 /* non existent STA. drop the frame */
3031 if (ar->arWmiEnabled) {
3032 #ifdef CONFIG_CHECKSUM_OFFLOAD
3033 A_UINT8 csumStart=0;
3035 A_UINT8 csum=skb->ip_summed;
3036 if(csumOffload && (csum==CHECKSUM_PARTIAL)){
3037 csumStart=skb->csum_start-(skb->network_header-skb->head)+sizeof(ATH_LLC_SNAP_HDR);
3038 csumDest=skb->csum_offset+csumStart;
3041 if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len - LINUX_HACK_FUDGE_FACTOR) {
3042 struct sk_buff *newbuf;
3045 * We really should have gotten enough headroom but sometimes
3046 * we still get packets with not enough headroom. Copy the packet.
3048 len = A_NETBUF_LEN(skb);
3049 newbuf = A_NETBUF_ALLOC(len);
3050 if (newbuf == NULL) {
3053 A_NETBUF_PUT(newbuf, len);
3054 A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len);
3057 /* fall through and assemble header */
3061 if (wmi_dot11_hdr_add(ar->arWmi,skb,ar->arNetworkType) != A_OK) {
3062 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx-wmi_dot11_hdr_add failed\n"));
3066 if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) {
3067 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_dix_2_dot3 failed\n"));
3071 #ifdef CONFIG_CHECKSUM_OFFLOAD
3072 if(csumOffload && (csum ==CHECKSUM_PARTIAL)){
3073 WMI_TX_META_V2 metaV2;
3074 metaV2.csumStart =csumStart;
3075 metaV2.csumDest = csumDest;
3076 metaV2.csumFlags = 0x1;/*instruct target to calculate checksum*/
3077 if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE, bMoreData, dot11Hdr,
3078 WMI_META_VERSION_2,&metaV2) != A_OK) {
3079 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_data_hdr_add failed\n"));
3087 if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE, bMoreData, dot11Hdr,0,NULL) != A_OK) {
3088 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_data_hdr_add failed\n"));
3094 if ((ar->arNetworkType == ADHOC_NETWORK) &&
3095 ar->arIbssPsEnable && ar->arConnected) {
3096 /* flag to check adhoc mapping once we take the lock below: */
3097 checkAdHocPsMapping = TRUE;
3100 /* get the stream mapping */
3101 ac = wmi_implicit_create_pstream(ar->arWmi, skb, 0, ar->arWmmEnabled);
3105 EPPING_HEADER *eppingHdr;
3107 eppingHdr = A_NETBUF_DATA(skb);
3109 if (IS_EPPING_PACKET(eppingHdr)) {
3110 /* the stream ID is mapped to an access class */
3111 ac = eppingHdr->StreamNo_h;
3112 /* some EPPING packets cannot be dropped no matter what access class it was
3113 * sent on. We can change the packet tag to guarantee it will not get dropped */
3114 if (IS_EPING_PACKET_NO_DROP(eppingHdr)) {
3115 htc_tag = AR6K_CONTROL_PKT_TAG;
3118 if (ac == HCI_TRANSPORT_STREAM_NUM) {
3119 /* pass this to HCI */
3120 #ifndef EXPORT_HCI_BRIDGE_INTERFACE
3121 if (A_SUCCESS(hci_test_send(ar,skb))) {
3125 /* set AC to discard this skb */
3128 /* a quirk of linux, the payload of the frame is 32-bit aligned and thus the addition
3129 * of the HTC header will mis-align the start of the HTC frame, so we add some
3130 * padding which will be stripped off in the target */
3131 if (EPPING_ALIGNMENT_PAD > 0) {
3132 A_NETBUF_PUSH(skb, EPPING_ALIGNMENT_PAD);
3137 /* not a ping packet, drop it */
3144 /* did we succeed ? */
3145 if ((ac == AC_NOT_MAPPED) && !checkAdHocPsMapping) {
3146 /* cleanup and exit */
3148 AR6000_STAT_INC(ar, tx_dropped);
3149 AR6000_STAT_INC(ar, tx_aborted_errors);
3155 /* take the lock to protect driver data */
3156 AR6000_SPIN_LOCK(&ar->arLock, 0);
3160 if (checkAdHocPsMapping) {
3161 eid = ar6000_ibss_map_epid(skb, dev, &mapNo);
3163 eid = arAc2EndpointID (ar, ac);
3165 /* validate that the endpoint is connected */
3166 if (eid == 0 || eid == ENDPOINT_UNUSED ) {
3167 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" eid %d is NOT mapped!\n", eid));
3170 /* allocate resource for this packet */
3171 cookie = ar6000_alloc_cookie(ar);
3173 if (cookie != NULL) {
3174 /* update counts while the lock is held */
3175 ar->arTxPending[eid]++;
3176 ar->arTotalTxDataPending++;
3181 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3183 if (cookie != NULL) {
3184 cookie->arc_bp[0] = (unsigned long)skb;
3185 cookie->arc_bp[1] = mapNo;
3186 SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
3194 if (debugdriver >= 3) {
3195 ar6000_dump_skb(skb);
3198 #ifdef HTC_TEST_SEND_PKTS
3199 DoHTCSendPktsTest(ar,mapNo,eid,skb);
3201 /* HTC interface is asynchronous, if this fails, cleanup will happen in
3202 * the ar6000_tx_complete callback */
3203 HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
3205 /* no packet to send, cleanup */
3207 AR6000_STAT_INC(ar, tx_dropped);
3208 AR6000_STAT_INC(ar, tx_aborted_errors);
3215 ar6000_acl_data_tx(struct sk_buff *skb, struct net_device *dev)
3217 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
3218 struct ar_cookie *cookie;
3219 HTC_ENDPOINT_ID eid = ENDPOINT_UNUSED;
3222 AR6000_SPIN_LOCK(&ar->arLock, 0);
3224 /* For now we send ACL on BE endpoint: We can also have a dedicated EP */
3225 eid = arAc2EndpointID (ar, 0);
3226 /* allocate resource for this packet */
3227 cookie = ar6000_alloc_cookie(ar);
3229 if (cookie != NULL) {
3230 /* update counts while the lock is held */
3231 ar->arTxPending[eid]++;
3232 ar->arTotalTxDataPending++;
3236 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3238 if (cookie != NULL) {
3239 cookie->arc_bp[0] = (unsigned long)skb;
3240 cookie->arc_bp[1] = 0;
3241 SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
3248 /* HTC interface is asynchronous, if this fails, cleanup will happen in
3249 * the ar6000_tx_complete callback */
3250 HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
3252 /* no packet to send, cleanup */
3254 AR6000_STAT_INC(ar, tx_dropped);
3255 AR6000_STAT_INC(ar, tx_aborted_errors);
3261 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
3263 tvsub(register struct timeval *out, register struct timeval *in)
3265 if((out->tv_usec -= in->tv_usec) < 0) {
3267 out->tv_usec += 1000000;
3269 out->tv_sec -= in->tv_sec;
3273 applyAPTCHeuristics(AR_SOFTC_T *ar)
3277 A_UINT32 throughput;
3281 AR6000_SPIN_LOCK(&ar->arLock, 0);
3283 if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) {
3284 do_gettimeofday(&ts);
3285 tvsub(&ts, &aptcTR.samplingTS);
3286 duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */
3287 numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
3289 if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) {
3290 /* Initialize the time stamp and byte count */
3291 aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
3292 do_gettimeofday(&aptcTR.samplingTS);
3294 /* Calculate and decide based on throughput thresholds */
3295 throughput = ((numbytes * 8) / duration);
3296 if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) {
3297 /* Disable Sleep and schedule a timer */
3298 A_ASSERT(ar->arWmiReady == TRUE);
3299 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3300 status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
3301 AR6000_SPIN_LOCK(&ar->arLock, 0);
3302 A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
3303 aptcTR.timerScheduled = TRUE;
3308 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3310 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
3312 static HTC_SEND_FULL_ACTION ar6000_tx_queue_full(void *Context, HTC_PACKET *pPacket)
3314 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
3315 HTC_SEND_FULL_ACTION action = HTC_SEND_FULL_KEEP;
3316 A_BOOL stopNet = FALSE;
3317 HTC_ENDPOINT_ID Endpoint = HTC_GET_ENDPOINT_FROM_PKT(pPacket);
3324 if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_CONTROL_PKT_TAG) {
3325 /* don't drop special control packets */
3329 accessClass = arEndpoint2Ac(ar,Endpoint);
3330 /* for endpoint ping testing drop Best Effort and Background */
3331 if ((accessClass == WMM_AC_BE) || (accessClass == WMM_AC_BK)) {
3332 action = HTC_SEND_FULL_DROP;
3335 /* keep but stop the netqueues */
3341 if (Endpoint == ar->arControlEp) {
3342 /* under normal WMI if this is getting full, then something is running rampant
3343 * the host should not be exhausting the WMI queue with too many commands
3344 * the only exception to this is during testing using endpointping */
3345 AR6000_SPIN_LOCK(&ar->arLock, 0);
3346 /* set flag to handle subsequent messages */
3347 ar->arWMIControlEpFull = TRUE;
3348 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3349 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI Control Endpoint is FULL!!! \n"));
3350 /* no need to stop the network */
3355 /* if we get here, we are dealing with data endpoints getting full */
3357 if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_CONTROL_PKT_TAG) {
3358 /* don't drop control packets issued on ANY data endpoint */
3362 if (ar->arNetworkType == ADHOC_NETWORK) {
3363 /* in adhoc mode, we cannot differentiate traffic priorities so there is no need to
3364 * continue, however we should stop the network */
3368 /* the last MAX_HI_COOKIE_NUM "batch" of cookies are reserved for the highest
3370 if (ar->arAcStreamPriMap[arEndpoint2Ac(ar,Endpoint)] < ar->arHiAcStreamActivePri &&
3371 ar->arCookieCount <= MAX_HI_COOKIE_NUM) {
3372 /* this stream's priority is less than the highest active priority, we
3373 * give preference to the highest priority stream by directing
3374 * HTC to drop the packet that overflowed */
3375 action = HTC_SEND_FULL_DROP;
3376 /* since we are dropping packets, no need to stop the network */
3384 AR6000_SPIN_LOCK(&ar->arLock, 0);
3385 ar->arNetQueueStopped = TRUE;
3386 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3387 /* one of the data endpoints queues is getting full..need to stop network stack
3388 * the queue will resume in ar6000_tx_complete() */
3389 netif_stop_queue(ar->arNetDev);
3397 ar6000_tx_complete(void *Context, HTC_PACKET_QUEUE *pPacketQueue)
3399 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
3402 struct ar_cookie * ar_cookie;
3403 HTC_ENDPOINT_ID eid;
3404 A_BOOL wakeEvent = FALSE;
3405 struct sk_buff_head skb_queue;
3406 HTC_PACKET *pPacket;
3407 struct sk_buff *pktSkb;
3408 A_BOOL flushing = FALSE;
3410 skb_queue_head_init(&skb_queue);
3412 /* lock the driver as we update internal state */
3413 AR6000_SPIN_LOCK(&ar->arLock, 0);
3415 /* reap completed packets */
3416 while (!HTC_QUEUE_EMPTY(pPacketQueue)) {
3418 pPacket = HTC_PACKET_DEQUEUE(pPacketQueue);
3420 ar_cookie = (struct ar_cookie *)pPacket->pPktContext;
3421 A_ASSERT(ar_cookie);
3423 status = pPacket->Status;
3424 pktSkb = (struct sk_buff *)ar_cookie->arc_bp[0];
3425 eid = pPacket->Endpoint;
3426 mapNo = ar_cookie->arc_bp[1];
3429 A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(pktSkb));
3431 /* add this to the list, use faster non-lock API */
3432 __skb_queue_tail(&skb_queue,pktSkb);
3434 if (A_SUCCESS(status)) {
3435 A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(pktSkb));
3438 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar6000_tx_complete skb=0x%lx data=0x%lx len=0x%x eid=%d ",
3439 (unsigned long)pktSkb, (unsigned long)pPacket->pBuffer,
3440 pPacket->ActualLength,
3443 ar->arTxPending[eid]--;
3445 if ((eid != ar->arControlEp) || bypasswmi) {
3446 ar->arTotalTxDataPending--;
3449 if (eid == ar->arControlEp)
3451 if (ar->arWMIControlEpFull) {
3452 /* since this packet completed, the WMI EP is no longer full */
3453 ar->arWMIControlEpFull = FALSE;
3456 if (ar->arTxPending[eid] == 0) {
3461 if (A_FAILED(status)) {
3462 if (status == A_ECANCELED) {
3463 /* a packet was flushed */
3466 AR6000_STAT_INC(ar, tx_errors);
3467 if (status != A_NO_RESOURCE) {
3468 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() -TX ERROR, status: 0x%x\n", __func__,
3472 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("OK\n"));
3474 AR6000_STAT_INC(ar, tx_packets);
3475 ar->arNetStats.tx_bytes += A_NETBUF_LEN(pktSkb);
3476 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
3477 aptcTR.bytesTransmitted += a_netbuf_to_len(pktSkb);
3478 applyAPTCHeuristics(ar);
3479 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
3482 // TODO this needs to be looked at
3483 if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable
3484 && (eid != ar->arControlEp) && mapNo)
3487 ar->arNodeMap[mapNo].txPending --;
3489 if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) {
3491 for (i = ar->arNodeNum; i > 0; i --) {
3492 if (!ar->arNodeMap[i - 1].txPending) {
3493 A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping));
3502 ar6000_free_cookie(ar, ar_cookie);
3504 if (ar->arNetQueueStopped) {
3505 ar->arNetQueueStopped = FALSE;
3509 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3511 /* lock is released, we can freely call other kernel APIs */
3513 /* free all skbs in our local list */
3514 while (!skb_queue_empty(&skb_queue)) {
3515 /* use non-lock version */
3516 pktSkb = __skb_dequeue(&skb_queue);
3517 A_NETBUF_FREE(pktSkb);
3520 if ((ar->arConnected == TRUE) || (bypasswmi)) {
3522 /* don't wake the queue if we are flushing, other wise it will just
3523 * keep queueing packets, which will keep failing */
3524 netif_wake_queue(ar->arNetDev);
3535 ieee80211_find_conn(AR_SOFTC_T *ar, A_UINT8 *node_addr)
3538 A_UINT8 i, max_conn;
3540 switch(ar->arNetworkType) {
3542 max_conn = AP_MAX_NUM_STA;
3549 for (i = 0; i < max_conn; i++) {
3550 if (IEEE80211_ADDR_EQ(node_addr, ar->sta_list[i].mac)) {
3551 conn = &ar->sta_list[i];
3559 sta_t *ieee80211_find_conn_for_aid(AR_SOFTC_T *ar, A_UINT8 aid)
3564 for (ctr = 0; ctr < AP_MAX_NUM_STA; ctr++) {
3565 if (ar->sta_list[ctr].aid == aid) {
3566 conn = &ar->sta_list[ctr];
3574 * Receive event handler. This is called by HTC when a packet is received
3578 ar6000_rx(void *Context, HTC_PACKET *pPacket)
3580 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
3581 struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext;
3583 A_UINT8 containsDot11Hdr = 0;
3584 A_STATUS status = pPacket->Status;
3585 HTC_ENDPOINT_ID ept = pPacket->Endpoint;
3587 A_ASSERT((status != A_OK) ||
3588 (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN)));
3590 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx ar=0x%lx eid=%d, skb=0x%lx, data=0x%lx, len=0x%x status:%d",
3591 (unsigned long)ar, ept, (unsigned long)skb, (unsigned long)pPacket->pBuffer,
3592 pPacket->ActualLength, status));
3593 if (status != A_OK) {
3594 if (status != A_ECANCELED) {
3595 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("RX ERR (%d) \n",status));
3599 /* take lock to protect buffer counts
3600 * and adaptive power throughput state */
3601 AR6000_SPIN_LOCK(&ar->arLock, 0);
3603 if (A_SUCCESS(status)) {
3604 AR6000_STAT_INC(ar, rx_packets);
3605 ar->arNetStats.rx_bytes += pPacket->ActualLength;
3606 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
3607 aptcTR.bytesReceived += a_netbuf_to_len(skb);
3608 applyAPTCHeuristics(ar);
3609 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
3611 A_NETBUF_PUT(skb, pPacket->ActualLength + HTC_HEADER_LEN);
3612 A_NETBUF_PULL(skb, HTC_HEADER_LEN);
3615 if (debugdriver >= 2) {
3616 ar6000_dump_skb(skb);
3621 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3623 skb->dev = ar->arNetDev;
3624 if (status != A_OK) {
3625 AR6000_STAT_INC(ar, rx_errors);
3627 } else if (ar->arWmiEnabled == TRUE) {
3628 if (ept == ar->arControlEp) {
3630 * this is a wmi control msg
3633 ar6000_check_wow_status(ar, skb, TRUE);
3634 #endif /* CONFIG_PM */
3635 wmi_control_rx(ar->arWmi, skb);
3637 WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb);
3638 A_UINT8 is_amsdu, tid, is_acl_data_frame;
3639 is_acl_data_frame = WMI_DATA_HDR_GET_DATA_TYPE(dhdr) == WMI_DATA_HDR_DATA_TYPE_ACL;
3641 ar6000_check_wow_status(ar, NULL, FALSE);
3642 #endif /* CONFIG_PM */
3644 * this is a wmi data packet
3648 if (processDot11Hdr) {
3649 minHdrLen = sizeof(WMI_DATA_HDR) + sizeof(struct ieee80211_frame) + sizeof(ATH_LLC_SNAP_HDR);
3651 minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) +
3652 sizeof(ATH_LLC_SNAP_HDR);
3655 /* In the case of AP mode we may receive NULL data frames
3656 * that do not have LLC hdr. They are 16 bytes in size.
3657 * Allow these frames in the AP mode.
3658 * ACL data frames don't follow ethernet frame bounds for
3661 if (ar->arNetworkType != AP_NETWORK && !is_acl_data_frame &&
3662 ((pPacket->ActualLength < minHdrLen) ||
3663 (pPacket->ActualLength > AR6000_MAX_RX_MESSAGE_SIZE)))
3666 * packet is too short or too long
3668 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("TOO SHORT or TOO LONG\n"));
3669 AR6000_STAT_INC(ar, rx_errors);
3670 AR6000_STAT_INC(ar, rx_length_errors);
3677 /* Access RSSI values here */
3678 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("RSSI %d\n",
3679 ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi));
3681 /* Get the Power save state of the STA */
3682 if (ar->arNetworkType == AP_NETWORK) {
3684 A_UINT8 psState=0,prevPsState;
3685 ATH_MAC_HDR *datap=NULL;
3688 meta_type = WMI_DATA_HDR_GET_META(dhdr);
3690 psState = (((WMI_DATA_HDR *)A_NETBUF_DATA(skb))->info
3691 >> WMI_DATA_HDR_PS_SHIFT) & WMI_DATA_HDR_PS_MASK;
3693 offset = sizeof(WMI_DATA_HDR);
3695 switch (meta_type) {
3698 case WMI_META_VERSION_1:
3699 offset += sizeof(WMI_RX_META_V1);
3701 #ifdef CONFIG_CHECKSUM_OFFLOAD
3702 case WMI_META_VERSION_2:
3703 offset += sizeof(WMI_RX_META_V2);
3710 datap = (ATH_MAC_HDR *)(A_NETBUF_DATA(skb)+offset);
3711 conn = ieee80211_find_conn(ar, datap->srcMac);
3714 /* if there is a change in PS state of the STA,
3715 * take appropriate steps.
3716 * 1. If Sleep-->Awake, flush the psq for the STA
3717 * Clear the PVB for the STA.
3718 * 2. If Awake-->Sleep, Starting queueing frames
3721 prevPsState = STA_IS_PWR_SLEEP(conn);
3723 STA_SET_PWR_SLEEP(conn);
3725 STA_CLR_PWR_SLEEP(conn);
3728 if (prevPsState ^ STA_IS_PWR_SLEEP(conn)) {
3730 if (!STA_IS_PWR_SLEEP(conn)) {
3732 A_MUTEX_LOCK(&conn->psqLock);
3733 while (!A_NETBUF_QUEUE_EMPTY(&conn->psq)) {
3734 struct sk_buff *skb=NULL;
3736 skb = A_NETBUF_DEQUEUE(&conn->psq);
3737 A_MUTEX_UNLOCK(&conn->psqLock);
3738 ar6000_data_tx(skb,ar->arNetDev);
3739 A_MUTEX_LOCK(&conn->psqLock);
3741 A_MUTEX_UNLOCK(&conn->psqLock);
3742 /* Clear the PVB for this STA */
3743 wmi_set_pvb_cmd(ar->arWmi, conn->aid, 0);
3747 /* This frame is from a STA that is not associated*/
3751 /* Drop NULL data frames here */
3752 if((pPacket->ActualLength < minHdrLen) ||
3753 (pPacket->ActualLength > AR6000_MAX_RX_MESSAGE_SIZE)) {
3759 is_amsdu = WMI_DATA_HDR_IS_AMSDU(dhdr);
3760 tid = WMI_DATA_HDR_GET_UP(dhdr);
3761 seq_no = WMI_DATA_HDR_GET_SEQNO(dhdr);
3762 meta_type = WMI_DATA_HDR_GET_META(dhdr);
3763 containsDot11Hdr = WMI_DATA_HDR_GET_DOT11(dhdr);
3765 wmi_data_hdr_remove(ar->arWmi, skb);
3767 switch (meta_type) {
3768 case WMI_META_VERSION_1:
3770 WMI_RX_META_V1 *pMeta = (WMI_RX_META_V1 *)A_NETBUF_DATA(skb);
3771 A_PRINTF("META %d %d %d %d %x\n", pMeta->status, pMeta->rix, pMeta->rssi, pMeta->channel, pMeta->flags);
3772 A_NETBUF_PULL((void*)skb, sizeof(WMI_RX_META_V1));
3775 #ifdef CONFIG_CHECKSUM_OFFLOAD
3776 case WMI_META_VERSION_2:
3778 WMI_RX_META_V2 *pMeta = (WMI_RX_META_V2 *)A_NETBUF_DATA(skb);
3779 if(pMeta->csumFlags & 0x1){
3780 skb->ip_summed=CHECKSUM_COMPLETE;
3781 skb->csum=(pMeta->csum);
3783 A_NETBUF_PULL((void*)skb, sizeof(WMI_RX_META_V2));
3791 A_ASSERT(status == A_OK);
3793 /* NWF: print the 802.11 hdr bytes */
3794 if(containsDot11Hdr) {
3795 status = wmi_dot11_hdr_remove(ar->arWmi,skb);
3796 } else if(!is_amsdu && !is_acl_data_frame) {
3797 status = wmi_dot3_2_dix(skb);
3800 if (status != A_OK) {
3801 /* Drop frames that could not be processed (lack of memory, etc.) */
3806 if (is_acl_data_frame) {
3807 A_NETBUF_PUSH(skb, sizeof(int));
3808 *((short *)A_NETBUF_DATA(skb)) = WMI_ACL_DATA_EVENTID;
3809 /* send the data packet to PAL driver */
3810 if(ar6k_pal_config_g.fpar6k_pal_recv_pkt) {
3811 if((*ar6k_pal_config_g.fpar6k_pal_recv_pkt)(ar->hcipal_info, skb) == TRUE)
3816 if ((ar->arNetDev->flags & IFF_UP) == IFF_UP) {
3817 if (ar->arNetworkType == AP_NETWORK) {
3818 struct sk_buff *skb1 = NULL;
3821 datap = (ATH_MAC_HDR *)A_NETBUF_DATA(skb);
3822 if (IEEE80211_IS_MULTICAST(datap->dstMac)) {
3823 /* Bcast/Mcast frames should be sent to the OS
3824 * stack as well as on the air.
3826 skb1 = skb_copy(skb,GFP_ATOMIC);
3828 /* Search for a connected STA with dstMac as
3829 * the Mac address. If found send the frame to
3830 * it on the air else send the frame up the
3834 conn = ieee80211_find_conn(ar, datap->dstMac);
3836 if (conn && ar->intra_bss) {
3839 } else if(conn && !ar->intra_bss) {
3845 ar6000_data_tx(skb1, ar->arNetDev);
3849 #ifdef ATH_AR6K_11N_SUPPORT
3850 aggr_process_recv_frm(ar->aggr_cntxt, tid, seq_no, is_amsdu, (void **)&skb);
3852 ar6000_deliver_frames_to_nw_stack((void *) ar->arNetDev, (void *)skb);
3856 if (EPPING_ALIGNMENT_PAD > 0) {
3857 A_NETBUF_PULL(skb, EPPING_ALIGNMENT_PAD);
3859 ar6000_deliver_frames_to_nw_stack((void *)ar->arNetDev, (void *)skb);
3868 ar6000_deliver_frames_to_nw_stack(void *dev, void *osbuf)
3870 struct sk_buff *skb = (struct sk_buff *)osbuf;
3874 if ((skb->dev->flags & IFF_UP) == IFF_UP) {
3876 ar6000_check_wow_status((AR_SOFTC_T *)ar6k_priv(dev), skb, FALSE);
3877 #endif /* CONFIG_PM */
3878 skb->protocol = eth_type_trans(skb, skb->dev);
3880 * If this routine is called on a ISR (Hard IRQ) or DSR (Soft IRQ)
3881 * or tasklet use the netif_rx to deliver the packet to the stack
3882 * netif_rx will queue the packet onto the receive queue and mark
3883 * the softirq thread has a pending action to complete. Kernel will
3884 * schedule the softIrq kernel thread after processing the DSR.
3886 * If this routine is called on a process context, use netif_rx_ni
3887 * which will schedle the softIrq kernel thread after queuing the packet.
3889 if (in_interrupt()) {
3902 ar6000_deliver_frames_to_bt_stack(void *dev, void *osbuf)
3904 struct sk_buff *skb = (struct sk_buff *)osbuf;
3908 if ((skb->dev->flags & IFF_UP) == IFF_UP) {
3909 skb->protocol = htons(ETH_P_CONTROL);
3919 ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint)
3921 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
3924 int buffersToRefill;
3925 HTC_PACKET *pPacket;
3926 HTC_PACKET_QUEUE queue;
3928 buffersToRefill = (int)AR6000_MAX_RX_BUFFERS -
3929 HTCGetNumRecvBuffers(ar->arHtcTarget, Endpoint);
3931 if (buffersToRefill <= 0) {
3932 /* fast return, nothing to fill */
3936 INIT_HTC_PACKET_QUEUE(&queue);
3938 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n",
3939 buffersToRefill, Endpoint));
3941 for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) {
3942 osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE);
3943 if (NULL == osBuf) {
3946 /* the HTC packet wrapper is at the head of the reserved area
3948 pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
3949 /* set re-fill info */
3950 SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint);
3952 HTC_PACKET_ENQUEUE(&queue,pPacket);
3955 if (!HTC_QUEUE_EMPTY(&queue)) {
3957 HTCAddReceivePktMultiple(ar->arHtcTarget, &queue);
3962 /* clean up our amsdu buffer list */
3963 static void ar6000_cleanup_amsdu_rxbufs(AR_SOFTC_T *ar)
3965 HTC_PACKET *pPacket;
3968 /* empty AMSDU buffer queue and free OS bufs */
3971 AR6000_SPIN_LOCK(&ar->arLock, 0);
3972 pPacket = HTC_PACKET_DEQUEUE(&ar->amsdu_rx_buffer_queue);
3973 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3975 if (NULL == pPacket) {
3979 osBuf = pPacket->pPktContext;
3980 if (NULL == osBuf) {
3985 A_NETBUF_FREE(osBuf);
3991 /* refill the amsdu buffer list */
3992 static void ar6000_refill_amsdu_rxbufs(AR_SOFTC_T *ar, int Count)
3994 HTC_PACKET *pPacket;
3998 osBuf = A_NETBUF_ALLOC(AR6000_AMSDU_BUFFER_SIZE);
3999 if (NULL == osBuf) {
4002 /* the HTC packet wrapper is at the head of the reserved area
4004 pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
4005 /* set re-fill info */
4006 SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_AMSDU_BUFFER_SIZE,0);
4008 AR6000_SPIN_LOCK(&ar->arLock, 0);
4009 /* put it in the list */
4010 HTC_PACKET_ENQUEUE(&ar->amsdu_rx_buffer_queue,pPacket);
4011 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
4017 /* callback to allocate a large receive buffer for a pending packet. This function is called when
4018 * an HTC packet arrives whose length exceeds a threshold value
4020 * We use a pre-allocated list of buffers of maximum AMSDU size (4K). Under linux it is more optimal to
4021 * keep the allocation size the same to optimize cached-slab allocations.
4024 static HTC_PACKET *ar6000_alloc_amsdu_rxbuf(void *Context, HTC_ENDPOINT_ID Endpoint, int Length)
4026 HTC_PACKET *pPacket = NULL;
4027 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
4028 int refillCount = 0;
4030 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_alloc_amsdu_rxbuf: eid=%d, Length:%d\n",Endpoint,Length));
4034 if (Length <= AR6000_BUFFER_SIZE) {
4035 /* shouldn't be getting called on normal sized packets */
4040 if (Length > AR6000_AMSDU_BUFFER_SIZE) {
4045 AR6000_SPIN_LOCK(&ar->arLock, 0);
4046 /* allocate a packet from the list */
4047 pPacket = HTC_PACKET_DEQUEUE(&ar->amsdu_rx_buffer_queue);
4048 /* see if we need to refill again */
4049 refillCount = AR6000_MAX_AMSDU_RX_BUFFERS - HTC_PACKET_QUEUE_DEPTH(&ar->amsdu_rx_buffer_queue);
4050 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
4052 if (NULL == pPacket) {
4055 /* set actual endpoint ID */
4056 pPacket->Endpoint = Endpoint;
4060 if (refillCount >= AR6000_AMSDU_REFILL_THRESHOLD) {
4061 ar6000_refill_amsdu_rxbufs(ar,refillCount);
4068 ar6000_set_multicast_list(struct net_device *dev)
4070 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000: Multicast filter not supported\n"));
4073 static struct net_device_stats *
4074 ar6000_get_stats(struct net_device *dev)
4076 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
4077 return &ar->arNetStats;
4080 static struct iw_statistics *
4081 ar6000_get_iwstats(struct net_device * dev)
4083 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
4084 TARGET_STATS *pStats = &ar->arTargetStats;
4085 struct iw_statistics * pIwStats = &ar->arIwStats;
4088 if (ar->bIsDestroyProgress || ar->arWmiReady == FALSE || ar->arWlanState == WLAN_DISABLED)
4090 pIwStats->status = 0;
4091 pIwStats->qual.qual = 0;
4092 pIwStats->qual.level =0;
4093 pIwStats->qual.noise = 0;
4094 pIwStats->discard.code =0;
4095 pIwStats->discard.retries=0;
4096 pIwStats->miss.beacon =0;
4101 * The in_atomic function is used to determine if the scheduling is
4102 * allowed in the current context or not. This was introduced in 2.6
4103 * From what I have read on the differences between 2.4 and 2.6, the
4104 * 2.4 kernel did not support preemption and so this check might not
4105 * be required for 2.4 kernels.
4109 wmi_get_stats_cmd(ar->arWmi);
4111 pIwStats->status = 1 ;
4112 pIwStats->qual.qual = pStats->cs_aveBeacon_rssi - 161;
4113 pIwStats->qual.level =pStats->cs_aveBeacon_rssi; /* noise is -95 dBm */
4114 pIwStats->qual.noise = pStats->noise_floor_calibation;
4115 pIwStats->discard.code = pStats->rx_decrypt_err;
4116 pIwStats->discard.retries = pStats->tx_retry_cnt;
4117 pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
4122 rtnllocked = rtnl_is_locked();
4126 pIwStats->status = 0;
4128 if (down_interruptible(&ar->arSem)) {
4134 if (ar->bIsDestroyProgress || ar->arWlanState == WLAN_DISABLED) {
4138 ar->statsUpdatePending = TRUE;
4140 if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
4144 wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
4145 if (signal_pending(current)) {
4146 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000 : WMI get stats timeout \n"));
4149 pIwStats->status = 1 ;
4150 pIwStats->qual.qual = pStats->cs_aveBeacon_rssi - 161;
4151 pIwStats->qual.level =pStats->cs_aveBeacon_rssi; /* noise is -95 dBm */
4152 pIwStats->qual.noise = pStats->noise_floor_calibation;
4153 pIwStats->discard.code = pStats->rx_decrypt_err;
4154 pIwStats->discard.retries = pStats->tx_retry_cnt;
4155 pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
4168 ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap, A_UINT32 sw_ver, A_UINT32 abi_ver)
4170 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
4171 struct net_device *dev = ar->arNetDev;
4173 ar->arWmiReady = TRUE;
4175 A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN);
4176 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
4177 dev->dev_addr[0], dev->dev_addr[1],
4178 dev->dev_addr[2], dev->dev_addr[3],
4179 dev->dev_addr[4], dev->dev_addr[5]));
4181 ar->arPhyCapability = phyCap;
4182 ar->arVersion.wlan_ver = sw_ver;
4183 ar->arVersion.abi_ver = abi_ver;
4185 #if WLAN_CONFIG_IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN
4186 wmi_pmparams_cmd(ar->arWmi, 0, 1, 0, 0, 1, IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN);
4188 #if WLAN_CONFIG_DONOT_IGNORE_BARKER_IN_ERP
4189 wmi_set_lpreamble_cmd(ar->arWmi, 0, WMI_DONOT_IGNORE_BARKER_IN_ERP);
4191 wmi_set_keepalive_cmd(ar->arWmi, WLAN_CONFIG_KEEP_ALIVE_INTERVAL);
4192 #if WLAN_CONFIG_DISABLE_11N
4194 WMI_SET_HT_CAP_CMD htCap;
4196 A_MEMZERO(&htCap, sizeof(WMI_SET_HT_CAP_CMD));
4198 wmi_set_ht_cap_cmd(ar->arWmi, &htCap);
4201 wmi_set_ht_cap_cmd(ar->arWmi, &htCap);
4203 #endif /* WLAN_CONFIG_DISABLE_11N */
4205 #ifdef ATH6K_CONFIG_OTA_MODE
4206 wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
4208 wmi_disctimeout_cmd(ar->arWmi, WLAN_CONFIG_DISCONNECT_TIMEOUT);
4212 add_new_sta(AR_SOFTC_T *ar, A_UINT8 *mac, A_UINT16 aid, A_UINT8 *wpaie,
4213 A_UINT8 ielen, A_UINT8 keymgmt, A_UINT8 ucipher, A_UINT8 auth)
4215 A_UINT8 free_slot=aid-1;
4217 A_MEMCPY(ar->sta_list[free_slot].mac, mac, ATH_MAC_LEN);
4218 A_MEMCPY(ar->sta_list[free_slot].wpa_ie, wpaie, ielen);
4219 ar->sta_list[free_slot].aid = aid;
4220 ar->sta_list[free_slot].keymgmt = keymgmt;
4221 ar->sta_list[free_slot].ucipher = ucipher;
4222 ar->sta_list[free_slot].auth = auth;
4223 ar->sta_list_index = ar->sta_list_index | (1 << free_slot);
4224 ar->arAPStats.sta[free_slot].aid = aid;
4228 ar6000_connect_event(AR_SOFTC_T *ar, A_UINT16 channel, A_UINT8 *bssid,
4229 A_UINT16 listenInterval, A_UINT16 beaconInterval,
4230 NETWORK_TYPE networkType, A_UINT8 beaconIeLen,
4231 A_UINT8 assocReqLen, A_UINT8 assocRespLen,
4234 union iwreq_data wrqu;
4235 int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos;
4236 static const char *tag1 = "ASSOCINFO(ReqIEs=";
4237 static const char *tag2 = "ASSOCRESPIE=";
4238 static const char *beaconIetag = "BEACONIE=";
4239 char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + strlen(tag1) + 1];
4241 A_UINT8 key_op_ctrl;
4242 unsigned long flags;
4243 struct ieee80211req_key *ik;
4244 CRYPTO_TYPE keyType = NONE_CRYPT;
4246 if(ar->arNetworkType & AP_NETWORK) {
4247 struct net_device *dev = ar->arNetDev;
4248 if(A_MEMCMP(dev->dev_addr, bssid, ATH_MAC_LEN)==0) {
4249 ar->arACS = channel;
4250 ik = &ar->ap_mode_bkey;
4252 switch(ar->arAuthMode) {
4254 if(ar->arPairwiseCrypto == WEP_CRYPT) {
4255 ar6000_install_static_wep_keys(ar);
4258 else if(ar->arPairwiseCrypto == WAPI_CRYPT) {
4259 ap_set_wapi_key(ar, ik);
4265 case (WPA_PSK_AUTH|WPA2_PSK_AUTH):
4266 switch (ik->ik_type) {
4267 case IEEE80211_CIPHER_TKIP:
4268 keyType = TKIP_CRYPT;
4270 case IEEE80211_CIPHER_AES_CCM:
4271 keyType = AES_CRYPT;
4276 wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, GROUP_USAGE,
4277 ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc,
4278 ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr,
4284 ar->arConnected = TRUE;
4288 A_PRINTF("NEW STA %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x \n "
4289 " AID=%d \n", bssid[0], bssid[1], bssid[2],
4290 bssid[3], bssid[4], bssid[5], channel);
4291 switch ((listenInterval>>8)&0xFF) {
4293 A_PRINTF("AUTH: OPEN\n");
4296 A_PRINTF("AUTH: SHARED\n");
4299 A_PRINTF("AUTH: Unknown\n");
4302 switch (listenInterval&0xFF) {
4304 A_PRINTF("KeyMgmt: WPA-PSK\n");
4307 A_PRINTF("KeyMgmt: WPA2-PSK\n");
4310 A_PRINTF("KeyMgmt: NONE\n");
4313 switch (beaconInterval) {
4315 A_PRINTF("Cipher: AES\n");
4318 A_PRINTF("Cipher: TKIP\n");
4321 A_PRINTF("Cipher: WEP\n");
4325 A_PRINTF("Cipher: WAPI\n");
4329 A_PRINTF("Cipher: NONE\n");
4333 add_new_sta(ar, bssid, channel /*aid*/,
4334 assocInfo /* WPA IE */, assocRespLen /* IE len */,
4335 listenInterval&0xFF /* Keymgmt */, beaconInterval /* cipher */,
4336 (listenInterval>>8)&0xFF /* auth alg */);
4338 /* Send event to application */
4339 A_MEMZERO(&wrqu, sizeof(wrqu));
4340 A_MEMCPY(wrqu.addr.sa_data, bssid, ATH_MAC_LEN);
4341 wireless_send_event(ar->arNetDev, IWEVREGISTERED, &wrqu, NULL);
4342 /* In case the queue is stopped when we switch modes, this will
4345 netif_wake_queue(ar->arNetDev);
4349 #ifdef ATH6K_CONFIG_CFG80211
4350 ar6k_cfg80211_connect_event(ar, channel, bssid,
4351 listenInterval, beaconInterval,
4352 networkType, beaconIeLen,
4353 assocReqLen, assocRespLen,
4355 #endif /* ATH6K_CONFIG_CFG80211 */
4357 A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid));
4358 ar->arBssChannel = channel;
4360 A_PRINTF("AR6000 connected event on freq %d ", channel);
4361 A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
4362 " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d"
4363 " assocRespLen =%d\n",
4364 bssid[0], bssid[1], bssid[2],
4365 bssid[3], bssid[4], bssid[5],
4366 listenInterval, beaconInterval,
4367 beaconIeLen, assocReqLen, assocRespLen);
4368 if (networkType & ADHOC_NETWORK) {
4369 if (networkType & ADHOC_CREATOR) {
4370 A_PRINTF("Network: Adhoc (Creator)\n");
4372 A_PRINTF("Network: Adhoc (Joiner)\n");
4375 A_PRINTF("Network: Infrastructure\n");
4378 if ((ar->arNetworkType == INFRA_NETWORK)) {
4379 wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB);
4382 if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) {
4383 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nBeaconIEs= "));
4386 A_MEMZERO(buf, sizeof(buf));
4387 sprintf(buf, "%s", beaconIetag);
4389 for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) {
4390 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
4391 sprintf(pos, "%2.2x", assocInfo[i]);
4394 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4396 A_MEMZERO(&wrqu, sizeof(wrqu));
4397 wrqu.data.length = strlen(buf);
4398 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4401 if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2))))
4403 assoc_resp_ie_pos = beaconIeLen + assocReqLen +
4404 sizeof(A_UINT16) + /* capinfo*/
4405 sizeof(A_UINT16) + /* status Code */
4406 sizeof(A_UINT16) ; /* associd */
4407 A_MEMZERO(buf, sizeof(buf));
4408 sprintf(buf, "%s", tag2);
4410 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nAssocRespIEs= "));
4412 * The Association Response Frame w.o. the WLAN header is delivered to
4413 * the host, so skip over to the IEs
4415 for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++)
4417 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
4418 sprintf(pos, "%2.2x", assocInfo[i]);
4421 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4423 A_MEMZERO(&wrqu, sizeof(wrqu));
4424 wrqu.data.length = strlen(buf);
4425 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4428 if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) {
4430 * assoc Request includes capability and listen interval. Skip these.
4432 assoc_req_ie_pos = beaconIeLen +
4433 sizeof(A_UINT16) + /* capinfo*/
4434 sizeof(A_UINT16); /* listen interval */
4436 A_MEMZERO(buf, sizeof(buf));
4437 sprintf(buf, "%s", tag1);
4439 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("AssocReqIEs= "));
4440 for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) {
4441 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
4442 sprintf(pos, "%2.2x", assocInfo[i]);
4445 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4447 A_MEMZERO(&wrqu, sizeof(wrqu));
4448 wrqu.data.length = strlen(buf);
4449 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4453 if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN &&
4454 ar->user_saved_keys.keyOk == TRUE)
4456 key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC;
4458 if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) {
4459 key_op_ctrl &= ~KEY_OP_INIT_RSC;
4461 key_op_ctrl |= KEY_OP_INIT_RSC;
4463 ar6000_reinstall_keys(ar, key_op_ctrl);
4465 #endif /* USER_KEYS */
4467 netif_wake_queue(ar->arNetDev);
4469 /* For CFG80211 the key configuration and the default key comes in after connect so no point in plumbing invalid keys */
4470 #ifndef ATH6K_CONFIG_CFG80211
4471 if ((networkType & ADHOC_NETWORK) &&
4472 (OPEN_AUTH == ar->arDot11AuthMode) &&
4473 (NONE_AUTH == ar->arAuthMode) &&
4474 (WEP_CRYPT == ar->arPairwiseCrypto))
4476 if (!ar->arConnected) {
4477 wmi_addKey_cmd(ar->arWmi,
4478 ar->arDefTxKeyIndex,
4480 GROUP_USAGE | TX_USAGE,
4481 ar->arWepKeyList[ar->arDefTxKeyIndex].arKeyLen,
4483 ar->arWepKeyList[ar->arDefTxKeyIndex].arKey, KEY_OP_INIT_VAL, NULL,
4487 #endif /* ATH6K_CONFIG_CFG80211 */
4489 /* Update connect & link status atomically */
4490 spin_lock_irqsave(&ar->arLock, flags);
4491 ar->arConnected = TRUE;
4492 ar->arConnectPending = FALSE;
4493 netif_carrier_on(ar->arNetDev);
4494 spin_unlock_irqrestore(&ar->arLock, flags);
4495 /* reset the rx aggr state */
4496 aggr_reset_state(ar->aggr_cntxt);
4499 A_MEMZERO(&wrqu, sizeof(wrqu));
4500 A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN);
4501 wrqu.addr.sa_family = ARPHRD_ETHER;
4502 wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
4503 if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) {
4504 A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap));
4506 ar->arNexEpId = ENDPOINT_2;
4508 if (!ar->arUserBssFilter) {
4509 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
4514 void ar6000_set_numdataendpts(AR_SOFTC_T *ar, A_UINT32 num)
4516 A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1));
4517 ar->arNumDataEndPts = num;
4521 sta_cleanup(AR_SOFTC_T *ar, A_UINT8 i)
4523 struct sk_buff *skb;
4525 /* empty the queued pkts in the PS queue if any */
4526 A_MUTEX_LOCK(&ar->sta_list[i].psqLock);
4527 while (!A_NETBUF_QUEUE_EMPTY(&ar->sta_list[i].psq)) {
4528 skb = A_NETBUF_DEQUEUE(&ar->sta_list[i].psq);
4531 A_MUTEX_UNLOCK(&ar->sta_list[i].psqLock);
4533 /* Zero out the state fields */
4534 A_MEMZERO(&ar->arAPStats.sta[ar->sta_list[i].aid-1], sizeof(WMI_PER_STA_STAT));
4535 A_MEMZERO(&ar->sta_list[i].mac, ATH_MAC_LEN);
4536 A_MEMZERO(&ar->sta_list[i].wpa_ie, IEEE80211_MAX_IE);
4537 ar->sta_list[i].aid = 0;
4538 ar->sta_list[i].flags = 0;
4540 ar->sta_list_index = ar->sta_list_index & ~(1 << i);
4545 remove_sta(AR_SOFTC_T *ar, A_UINT8 *mac, A_UINT16 reason)
4547 A_UINT8 i, removed=0;
4549 if(IS_MAC_NULL(mac)) {
4553 if(IS_MAC_BCAST(mac)) {
4554 A_PRINTF("DEL ALL STA\n");
4555 for(i=0; i < AP_MAX_NUM_STA; i++) {
4556 if(!IS_MAC_NULL(ar->sta_list[i].mac)) {
4562 for(i=0; i < AP_MAX_NUM_STA; i++) {
4563 if(A_MEMCMP(ar->sta_list[i].mac, mac, ATH_MAC_LEN)==0) {
4564 A_PRINTF("DEL STA %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
4565 " aid=%d REASON=%d\n", mac[0], mac[1], mac[2],
4566 mac[3], mac[4], mac[5], ar->sta_list[i].aid, reason);
4578 ar6000_disconnect_event(AR_SOFTC_T *ar, A_UINT8 reason, A_UINT8 *bssid,
4579 A_UINT8 assocRespLen, A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus)
4582 unsigned long flags;
4583 union iwreq_data wrqu;
4585 if(ar->arNetworkType & AP_NETWORK) {
4586 union iwreq_data wrqu;
4587 struct sk_buff *skb;
4589 if(!remove_sta(ar, bssid, protocolReasonStatus)) {
4593 /* If there are no more associated STAs, empty the mcast PS q */
4594 if (ar->sta_list_index == 0) {
4595 A_MUTEX_LOCK(&ar->mcastpsqLock);
4596 while (!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) {
4597 skb = A_NETBUF_DEQUEUE(&ar->mcastpsq);
4600 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
4602 /* Clear the LSB of the BitMapCtl field of the TIM IE */
4603 if (ar->arWmiReady) {
4604 wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 0);
4608 if(!IS_MAC_BCAST(bssid)) {
4609 /* Send event to application */
4610 A_MEMZERO(&wrqu, sizeof(wrqu));
4611 A_MEMCPY(wrqu.addr.sa_data, bssid, ATH_MAC_LEN);
4612 wireless_send_event(ar->arNetDev, IWEVEXPIRED, &wrqu, NULL);
4617 #ifdef ATH6K_CONFIG_CFG80211
4618 ar6k_cfg80211_disconnect_event(ar, reason, bssid,
4619 assocRespLen, assocInfo,
4620 protocolReasonStatus);
4621 #endif /* ATH6K_CONFIG_CFG80211 */
4623 /* Send disconnect event to supplicant */
4624 A_MEMZERO(&wrqu, sizeof(wrqu));
4625 wrqu.addr.sa_family = ARPHRD_ETHER;
4626 wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
4628 /* it is necessary to clear the host-side rx aggregation state */
4629 aggr_reset_state(ar->aggr_cntxt);
4631 A_UNTIMEOUT(&ar->disconnect_timer);
4633 A_PRINTF("AR6000 disconnected");
4634 if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) {
4635 A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
4636 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
4639 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nDisconnect Reason is %d", reason));
4640 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nProtocol Reason/Status Code is %d", protocolReasonStatus));
4641 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nAssocResp Frame = %s",
4642 assocRespLen ? " " : "NULL"));
4643 for (i = 0; i < assocRespLen; i++) {
4645 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4647 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
4649 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4651 * If the event is due to disconnect cmd from the host, only they the target
4652 * would stop trying to connect. Under any other condition, target would
4653 * keep trying to connect.
4656 if( reason == DISCONNECT_CMD)
4658 ar->arConnectPending = FALSE;
4659 if ((!ar->arUserBssFilter) && (ar->arWmiReady)) {
4660 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
4663 ar->arConnectPending = TRUE;
4664 if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) ||
4665 ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) {
4666 ar->arConnected = TRUE;
4671 if ((reason == NO_NETWORK_AVAIL) && (ar->arWmiReady))
4673 bss_t *pWmiSsidnode = NULL;
4675 /* remove the current associated bssid node */
4676 wmi_free_node (ar->arWmi, bssid);
4679 * In case any other same SSID nodes are present
4680 * remove it, since those nodes also not available now
4685 * Find the nodes based on SSID and remove it
4686 * NOTE :: This case will not work out for Hidden-SSID
4688 pWmiSsidnode = wmi_find_Ssidnode (ar->arWmi, ar->arSsid, ar->arSsidLen, FALSE, TRUE);
4692 wmi_free_node (ar->arWmi, pWmiSsidnode->ni_macaddr);
4695 } while (pWmiSsidnode);
4698 /* Update connect & link status atomically */
4699 spin_lock_irqsave(&ar->arLock, flags);
4700 ar->arConnected = FALSE;
4701 netif_carrier_off(ar->arNetDev);
4702 spin_unlock_irqrestore(&ar->arLock, flags);
4704 if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) {
4709 if (reason != CSERV_DISCONNECT)
4711 ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
4712 ar->user_key_ctrl = 0;
4714 #endif /* USER_KEYS */
4716 netif_stop_queue(ar->arNetDev);
4717 A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
4718 ar->arBssChannel = 0;
4719 ar->arBeaconInterval = 0;
4721 ar6000_TxDataCleanup(ar);
4725 ar6000_regDomain_event(AR_SOFTC_T *ar, A_UINT32 regCode)
4727 A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode);
4728 ar->arRegCode = regCode;
4731 #ifdef ATH_AR6K_11N_SUPPORT
4733 ar6000_aggr_rcv_addba_req_evt(AR_SOFTC_T *ar, WMI_ADDBA_REQ_EVENT *evt)
4735 if(evt->status == 0) {
4736 aggr_recv_addba_req_evt(ar->aggr_cntxt, evt->tid, evt->st_seq_no, evt->win_sz);
4741 ar6000_aggr_rcv_addba_resp_evt(AR_SOFTC_T *ar, WMI_ADDBA_RESP_EVENT *evt)
4743 A_PRINTF("ADDBA RESP. tid %d status %d, sz %d\n", evt->tid, evt->status, evt->amsdu_sz);
4744 if(evt->status == 0) {
4749 ar6000_aggr_rcv_delba_req_evt(AR_SOFTC_T *ar, WMI_DELBA_EVENT *evt)
4751 aggr_recv_delba_req_evt(ar->aggr_cntxt, evt->tid);
4755 void register_pal_cb(ar6k_pal_config_t *palConfig_p)
4757 ar6k_pal_config_g = *palConfig_p;
4761 ar6000_hci_event_rcv_evt(struct ar6_softc *ar, WMI_HCI_EVENT *cmd)
4766 A_STATUS ret = A_OK;
4768 size = cmd->evt_buf_sz + 4;
4769 osbuf = A_NETBUF_ALLOC(size);
4770 if (osbuf == NULL) {
4772 A_PRINTF("Error in allocating netbuf \n");
4776 A_NETBUF_PUT(osbuf, size);
4777 buf = (A_UINT8 *)A_NETBUF_DATA(osbuf);
4778 /* First 2-bytes carry HCI event/ACL data type
4779 * the next 2 are free
4781 *((short *)buf) = WMI_HCI_EVENT_EVENTID;
4783 A_MEMCPY(buf, cmd->buf, cmd->evt_buf_sz);
4785 if(ar6k_pal_config_g.fpar6k_pal_recv_pkt)
4787 /* pass the cmd packet to PAL driver */
4788 if((*ar6k_pal_config_g.fpar6k_pal_recv_pkt)(ar->hcipal_info, osbuf) == TRUE)
4791 ar6000_deliver_frames_to_nw_stack(ar->arNetDev, osbuf);
4793 A_PRINTF_LOG("HCI Event From PAL <-- \n");
4794 for(i = 0; i < cmd->evt_buf_sz; i++) {
4795 A_PRINTF_LOG("0x%02x ", cmd->buf[i]);
4801 A_PRINTF_LOG("==================================\n");
4806 ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info)
4808 #if WIRELESS_EXT >= 18
4809 struct iw_pmkid_cand *pmkcand;
4810 #else /* WIRELESS_EXT >= 18 */
4811 static const char *tag = "PRE-AUTH";
4813 #endif /* WIRELESS_EXT >= 18 */
4815 union iwreq_data wrqu;
4818 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("AR6000 Neighbor Report Event\n"));
4819 for (i=0; i < numAps; info++, i++) {
4820 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
4821 info->bssid[0], info->bssid[1], info->bssid[2],
4822 info->bssid[3], info->bssid[4], info->bssid[5]));
4823 if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) {
4824 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("preauth-cap"));
4826 if (info->bssFlags & WMI_PMKID_VALID_BSS) {
4827 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,(" pmkid-valid\n"));
4828 continue; /* we skip bss if the pmkid is already valid */
4830 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("\n"));
4831 A_MEMZERO(&wrqu, sizeof(wrqu));
4832 #if WIRELESS_EXT >= 18
4833 pmkcand = A_MALLOC_NOWAIT(sizeof(struct iw_pmkid_cand));
4834 A_MEMZERO(pmkcand, sizeof(struct iw_pmkid_cand));
4836 pmkcand->flags = info->bssFlags;
4837 A_MEMCPY(pmkcand->bssid.sa_data, info->bssid, ATH_MAC_LEN);
4838 wrqu.data.length = sizeof(struct iw_pmkid_cand);
4839 wireless_send_event(ar->arNetDev, IWEVPMKIDCAND, &wrqu, (char *)pmkcand);
4841 #else /* WIRELESS_EXT >= 18 */
4842 snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x",
4844 info->bssid[0], info->bssid[1], info->bssid[2],
4845 info->bssid[3], info->bssid[4], info->bssid[5],
4847 wrqu.data.length = strlen(buf);
4848 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4849 #endif /* WIRELESS_EXT >= 18 */
4854 ar6000_tkip_micerr_event(AR_SOFTC_T *ar, A_UINT8 keyid, A_BOOL ismcast)
4856 static const char *tag = "MLME-MICHAELMICFAILURE.indication";
4858 union iwreq_data wrqu;
4861 * For AP case, keyid will have aid of STA which sent pkt with
4862 * MIC error. Use this aid to get MAC & send it to hostapd.
4864 if (ar->arNetworkType == AP_NETWORK) {
4865 sta_t *s = ieee80211_find_conn_for_aid(ar, (keyid >> 2));
4867 A_PRINTF("AP TKIP MIC error received from Invalid aid / STA not found =%d\n", keyid);
4870 A_PRINTF("AP TKIP MIC error received from aid=%d\n", keyid);
4871 snprintf(buf,sizeof(buf), "%s addr=%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
4872 tag, s->mac[0],s->mac[1],s->mac[2],s->mac[3],s->mac[4],s->mac[5]);
4875 #ifdef ATH6K_CONFIG_CFG80211
4876 ar6k_cfg80211_tkip_micerr_event(ar, keyid, ismcast);
4877 #endif /* ATH6K_CONFIG_CFG80211 */
4879 A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n",
4880 keyid & 0x3, ismcast ? "multi": "uni");
4881 snprintf(buf, sizeof(buf), "%s(keyid=%d %sicast)", tag, keyid & 0x3,
4882 ismcast ? "mult" : "un");
4885 memset(&wrqu, 0, sizeof(wrqu));
4886 wrqu.data.length = strlen(buf);
4887 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4891 ar6000_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status)
4894 #ifdef ATH6K_CONFIG_CFG80211
4895 ar6k_cfg80211_scanComplete_event(ar, status);
4896 #endif /* ATH6K_CONFIG_CFG80211 */
4898 if (!ar->arUserBssFilter) {
4899 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
4901 if (ar->scan_triggered) {
4903 union iwreq_data wrqu;
4904 A_MEMZERO(&wrqu, sizeof(wrqu));
4905 wireless_send_event(ar->arNetDev, SIOCGIWSCAN, &wrqu, NULL);
4907 ar->scan_triggered = 0;
4910 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,( "AR6000 scan complete: %d\n", status));
4914 ar6000_targetStats_event(AR_SOFTC_T *ar, A_UINT8 *ptr, A_UINT32 len)
4918 if(ar->arNetworkType == AP_NETWORK) {
4919 WMI_AP_MODE_STAT *p = (WMI_AP_MODE_STAT *)ptr;
4920 WMI_AP_MODE_STAT *ap = &ar->arAPStats;
4922 if (len < sizeof(*p)) {
4926 for(ac=0;ac<AP_MAX_NUM_STA;ac++) {
4927 ap->sta[ac].tx_bytes += p->sta[ac].tx_bytes;
4928 ap->sta[ac].tx_pkts += p->sta[ac].tx_pkts;
4929 ap->sta[ac].tx_error += p->sta[ac].tx_error;
4930 ap->sta[ac].tx_discard += p->sta[ac].tx_discard;
4931 ap->sta[ac].rx_bytes += p->sta[ac].rx_bytes;
4932 ap->sta[ac].rx_pkts += p->sta[ac].rx_pkts;
4933 ap->sta[ac].rx_error += p->sta[ac].rx_error;
4934 ap->sta[ac].rx_discard += p->sta[ac].rx_discard;
4938 WMI_TARGET_STATS *pTarget = (WMI_TARGET_STATS *)ptr;
4939 TARGET_STATS *pStats = &ar->arTargetStats;
4941 if (len < sizeof(*pTarget)) {
4945 // Update the RSSI of the connected bss.
4946 if (ar->arConnected) {
4947 bss_t *pConnBss = NULL;
4949 pConnBss = wmi_find_node(ar->arWmi,ar->arBssid);
4952 pConnBss->ni_rssi = pTarget->cservStats.cs_aveBeacon_rssi;
4953 pConnBss->ni_snr = pTarget->cservStats.cs_aveBeacon_snr;
4954 wmi_node_return(ar->arWmi, pConnBss);
4958 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 updating target stats\n"));
4959 pStats->tx_packets += pTarget->txrxStats.tx_stats.tx_packets;
4960 pStats->tx_bytes += pTarget->txrxStats.tx_stats.tx_bytes;
4961 pStats->tx_unicast_pkts += pTarget->txrxStats.tx_stats.tx_unicast_pkts;
4962 pStats->tx_unicast_bytes += pTarget->txrxStats.tx_stats.tx_unicast_bytes;
4963 pStats->tx_multicast_pkts += pTarget->txrxStats.tx_stats.tx_multicast_pkts;
4964 pStats->tx_multicast_bytes += pTarget->txrxStats.tx_stats.tx_multicast_bytes;
4965 pStats->tx_broadcast_pkts += pTarget->txrxStats.tx_stats.tx_broadcast_pkts;
4966 pStats->tx_broadcast_bytes += pTarget->txrxStats.tx_stats.tx_broadcast_bytes;
4967 pStats->tx_rts_success_cnt += pTarget->txrxStats.tx_stats.tx_rts_success_cnt;
4968 for(ac = 0; ac < WMM_NUM_AC; ac++)
4969 pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac];
4970 pStats->tx_errors += pTarget->txrxStats.tx_stats.tx_errors;
4971 pStats->tx_failed_cnt += pTarget->txrxStats.tx_stats.tx_failed_cnt;
4972 pStats->tx_retry_cnt += pTarget->txrxStats.tx_stats.tx_retry_cnt;
4973 pStats->tx_mult_retry_cnt += pTarget->txrxStats.tx_stats.tx_mult_retry_cnt;
4974 pStats->tx_rts_fail_cnt += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt;
4975 pStats->tx_unicast_rate = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate);
4977 pStats->rx_packets += pTarget->txrxStats.rx_stats.rx_packets;
4978 pStats->rx_bytes += pTarget->txrxStats.rx_stats.rx_bytes;
4979 pStats->rx_unicast_pkts += pTarget->txrxStats.rx_stats.rx_unicast_pkts;
4980 pStats->rx_unicast_bytes += pTarget->txrxStats.rx_stats.rx_unicast_bytes;
4981 pStats->rx_multicast_pkts += pTarget->txrxStats.rx_stats.rx_multicast_pkts;
4982 pStats->rx_multicast_bytes += pTarget->txrxStats.rx_stats.rx_multicast_bytes;
4983 pStats->rx_broadcast_pkts += pTarget->txrxStats.rx_stats.rx_broadcast_pkts;
4984 pStats->rx_broadcast_bytes += pTarget->txrxStats.rx_stats.rx_broadcast_bytes;
4985 pStats->rx_fragment_pkt += pTarget->txrxStats.rx_stats.rx_fragment_pkt;
4986 pStats->rx_errors += pTarget->txrxStats.rx_stats.rx_errors;
4987 pStats->rx_crcerr += pTarget->txrxStats.rx_stats.rx_crcerr;
4988 pStats->rx_key_cache_miss += pTarget->txrxStats.rx_stats.rx_key_cache_miss;
4989 pStats->rx_decrypt_err += pTarget->txrxStats.rx_stats.rx_decrypt_err;
4990 pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames;
4991 pStats->rx_unicast_rate = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate);
4994 pStats->tkip_local_mic_failure
4995 += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure;
4996 pStats->tkip_counter_measures_invoked
4997 += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked;
4998 pStats->tkip_replays += pTarget->txrxStats.tkipCcmpStats.tkip_replays;
4999 pStats->tkip_format_errors += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors;
5000 pStats->ccmp_format_errors += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors;
5001 pStats->ccmp_replays += pTarget->txrxStats.tkipCcmpStats.ccmp_replays;
5003 pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt;
5004 pStats->noise_floor_calibation = pTarget->noise_floor_calibation;
5006 pStats->cs_bmiss_cnt += pTarget->cservStats.cs_bmiss_cnt;
5007 pStats->cs_lowRssi_cnt += pTarget->cservStats.cs_lowRssi_cnt;
5008 pStats->cs_connect_cnt += pTarget->cservStats.cs_connect_cnt;
5009 pStats->cs_disconnect_cnt += pTarget->cservStats.cs_disconnect_cnt;
5010 pStats->cs_aveBeacon_snr = pTarget->cservStats.cs_aveBeacon_snr;
5011 pStats->cs_aveBeacon_rssi = pTarget->cservStats.cs_aveBeacon_rssi;
5013 if (enablerssicompensation) {
5014 pStats->cs_aveBeacon_rssi =
5015 rssi_compensation_calc(ar, pStats->cs_aveBeacon_rssi);
5017 pStats->cs_lastRoam_msec = pTarget->cservStats.cs_lastRoam_msec;
5018 pStats->cs_snr = pTarget->cservStats.cs_snr;
5019 pStats->cs_rssi = pTarget->cservStats.cs_rssi;
5021 pStats->lq_val = pTarget->lqVal;
5023 pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped;
5024 pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups;
5025 pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups;
5026 pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded;
5027 pStats->arp_received += pTarget->arpStats.arp_received;
5028 pStats->arp_matched += pTarget->arpStats.arp_matched;
5029 pStats->arp_replied += pTarget->arpStats.arp_replied;
5031 if (ar->statsUpdatePending) {
5032 ar->statsUpdatePending = FALSE;
5039 ar6000_rssiThreshold_event(AR_SOFTC_T *ar, WMI_RSSI_THRESHOLD_VAL newThreshold, A_INT16 rssi)
5041 USER_RSSI_THOLD userRssiThold;
5043 rssi = rssi + SIGNAL_QUALITY_NOISE_FLOOR;
5045 if (enablerssicompensation) {
5046 rssi = rssi_compensation_calc(ar, rssi);
5049 /* Send an event to the app */
5050 userRssiThold.tag = ar->rssi_map[newThreshold].tag;
5051 userRssiThold.rssi = rssi;
5052 A_PRINTF("rssi Threshold range = %d tag = %d rssi = %d\n", newThreshold,
5053 userRssiThold.tag, userRssiThold.rssi);
5055 ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(A_UINT8 *)&userRssiThold, sizeof(USER_RSSI_THOLD));
5060 ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, A_UINT32 cookie, A_UINT32 source)
5062 if (source == APP_HB_CHALLENGE) {
5063 /* Report it to the app in case it wants a positive acknowledgement */
5064 ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID,
5065 (A_UINT8 *)&cookie, sizeof(cookie));
5067 /* This would ignore the replys that come in after their due time */
5068 if (cookie == ar->arHBChallengeResp.seqNum) {
5069 ar->arHBChallengeResp.outstanding = FALSE;
5076 ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal)
5078 char *errString[] = {
5079 [WMI_TARGET_PM_ERR_FAIL] "WMI_TARGET_PM_ERR_FAIL",
5080 [WMI_TARGET_KEY_NOT_FOUND] "WMI_TARGET_KEY_NOT_FOUND",
5081 [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR",
5082 [WMI_TARGET_BMISS] "WMI_TARGET_BMISS",
5083 [WMI_PSDISABLE_NODE_JOIN] "WMI_PSDISABLE_NODE_JOIN"
5086 A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal);
5088 /* One error is reported at a time, and errorval is a bitmask */
5089 if(errorVal & (errorVal - 1))
5092 A_PRINTF("AR6000 Error type = ");
5095 case WMI_TARGET_PM_ERR_FAIL:
5096 case WMI_TARGET_KEY_NOT_FOUND:
5097 case WMI_TARGET_DECRYPTION_ERR:
5098 case WMI_TARGET_BMISS:
5099 case WMI_PSDISABLE_NODE_JOIN:
5100 A_PRINTF("%s\n", errString[errorVal]);
5103 A_PRINTF("INVALID\n");
5111 ar6000_cac_event(AR_SOFTC_T *ar, A_UINT8 ac, A_UINT8 cacIndication,
5112 A_UINT8 statusCode, A_UINT8 *tspecSuggestion)
5114 WMM_TSPEC_IE *tspecIe;
5117 * This is the TSPEC IE suggestion from AP.
5118 * Suggestion provided by AP under some error
5119 * cases, could be helpful for the host app.
5120 * Check documentation.
5122 tspecIe = (WMM_TSPEC_IE *)tspecSuggestion;
5125 * What do we do, if we get TSPEC rejection? One thought
5126 * that comes to mind is implictly delete the pstream...
5128 A_PRINTF("AR6000 CAC notification. "
5129 "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n",
5130 ac, cacIndication, statusCode);
5134 ar6000_channel_change_event(AR_SOFTC_T *ar, A_UINT16 oldChannel,
5135 A_UINT16 newChannel)
5137 A_PRINTF("Channel Change notification\nOld Channel: %d, New Channel: %d\n",
5138 oldChannel, newChannel);
5141 #define AR6000_PRINT_BSSID(_pBss) do { \
5142 A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\
5143 (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\
5144 (_pBss)[4],(_pBss)[5]); \
5148 ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl)
5152 A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n",
5153 pTbl->numEntries, pTbl->roamMode);
5154 for (i= 0; i < pTbl->numEntries; i++) {
5155 A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i,
5156 pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1],
5157 pTbl->bssRoamInfo[i].bssid[2],
5158 pTbl->bssRoamInfo[i].bssid[3],
5159 pTbl->bssRoamInfo[i].bssid[4],
5160 pTbl->bssRoamInfo[i].bssid[5]);
5161 A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d"
5163 pTbl->bssRoamInfo[i].rssi,
5164 pTbl->bssRoamInfo[i].rssidt,
5165 pTbl->bssRoamInfo[i].last_rssi,
5166 pTbl->bssRoamInfo[i].util,
5167 pTbl->bssRoamInfo[i].roam_util,
5168 pTbl->bssRoamInfo[i].bias);
5173 ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply)
5177 /*Each event now contains exactly one filter, see bug 26613*/
5178 A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num, wow_reply->num_filters);
5179 A_PRINTF("wow mode = %s host mode = %s\n",
5180 (wow_reply->wow_mode == 0? "disabled":"enabled"),
5181 (wow_reply->host_mode == 1 ? "awake":"asleep"));
5184 /*If there are no patterns, the reply will only contain generic
5185 WoW information. Pattern information will exist only if there are
5186 patterns present. Bug 26716*/
5188 /* If this event contains pattern information, display it*/
5189 if (wow_reply->this_filter_num) {
5191 A_PRINTF("id=%d size=%d offset=%d\n",
5192 wow_reply->wow_filters[i].wow_filter_id,
5193 wow_reply->wow_filters[i].wow_filter_size,
5194 wow_reply->wow_filters[i].wow_filter_offset);
5195 A_PRINTF("wow pattern = ");
5196 for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
5197 A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]);
5200 A_PRINTF("\nwow mask = ");
5201 for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
5202 A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]);
5209 * Report the Roaming related data collected on the target
5212 ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p)
5214 A_PRINTF("Disconnect Data : BSSID: ");
5215 AR6000_PRINT_BSSID(p->disassoc_bssid);
5216 A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n",
5217 p->disassoc_bss_rssi,p->disassoc_time,
5219 A_PRINTF("Connect Data: BSSID: ");
5220 AR6000_PRINT_BSSID(p->assoc_bssid);
5221 A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n",
5222 p->assoc_bss_rssi,p->assoc_time,
5223 p->allow_txrx_time);
5227 ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p)
5229 switch (p->roamDataType) {
5230 case ROAM_DATA_TIME:
5231 ar6000_display_roam_time(&p->u.roamTime);
5239 ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, A_UINT8 *datap, int len)
5241 struct sk_buff *skb;
5242 WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap;
5245 if (!ar->arMgmtFilter) {
5248 if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) &&
5249 (bih->frameType != BEACON_FTYPE)) ||
5250 ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) &&
5251 (bih->frameType != PROBERESP_FTYPE)))
5256 if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) {
5258 A_NETBUF_PUT(skb, len);
5259 A_MEMCPY(A_NETBUF_DATA(skb), datap, len);
5260 skb->dev = ar->arNetDev;
5261 A_MEMCPY(skb_mac_header(skb), A_NETBUF_DATA(skb), 6);
5262 skb->ip_summed = CHECKSUM_NONE;
5263 skb->pkt_type = PACKET_OTHERHOST;
5264 skb->protocol = __constant_htons(0x0019);
5269 A_UINT32 wmiSendCmdNum;
5272 ar6000_control_tx(void *devt, void *osbuf, HTC_ENDPOINT_ID eid)
5274 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
5275 A_STATUS status = A_OK;
5276 struct ar_cookie *cookie = NULL;
5279 if (ar->arWowState != WLAN_WOW_STATE_NONE) {
5280 A_NETBUF_FREE(osbuf);
5283 #endif /* CONFIG_PM */
5284 /* take lock to protect ar6000_alloc_cookie() */
5285 AR6000_SPIN_LOCK(&ar->arLock, 0);
5289 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar_contrstatus = ol_tx: skb=0x%lx, len=0x%x eid =%d\n",
5290 (unsigned long)osbuf, A_NETBUF_LEN(osbuf), eid));
5292 if (ar->arWMIControlEpFull && (eid == ar->arControlEp)) {
5293 /* control endpoint is full, don't allocate resources, we
5294 * are just going to drop this packet */
5296 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" WMI Control EP full, dropping packet : 0x%lX, len:%d \n",
5297 (unsigned long)osbuf, A_NETBUF_LEN(osbuf)));
5299 cookie = ar6000_alloc_cookie(ar);
5302 if (cookie == NULL) {
5303 status = A_NO_MEMORY;
5308 A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum);
5309 for(i = 0; i < a_netbuf_to_len(osbuf); i++)
5310 A_PRINTF("%x ", ((A_UINT8 *)a_netbuf_to_data(osbuf))[i]);
5318 if (cookie != NULL) {
5319 /* got a structure to send it out on */
5320 ar->arTxPending[eid]++;
5322 if (eid != ar->arControlEp) {
5323 ar->arTotalTxDataPending++;
5327 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
5329 if (cookie != NULL) {
5330 cookie->arc_bp[0] = (unsigned long)osbuf;
5331 cookie->arc_bp[1] = 0;
5332 SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
5334 A_NETBUF_DATA(osbuf),
5335 A_NETBUF_LEN(osbuf),
5337 AR6K_CONTROL_PKT_TAG);
5338 /* this interface is asynchronous, if there is an error, cleanup will happen in the
5339 * TX completion callback */
5340 HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
5344 if (status != A_OK) {
5345 A_NETBUF_FREE(osbuf);
5350 /* indicate tx activity or inactivity on a WMI stream */
5351 void ar6000_indicate_tx_activity(void *devt, A_UINT8 TrafficClass, A_BOOL Active)
5353 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
5354 HTC_ENDPOINT_ID eid ;
5357 if (ar->arWmiEnabled) {
5358 eid = arAc2EndpointID(ar, TrafficClass);
5360 AR6000_SPIN_LOCK(&ar->arLock, 0);
5362 ar->arAcStreamActive[TrafficClass] = Active;
5365 /* when a stream goes active, keep track of the active stream with the highest priority */
5367 if (ar->arAcStreamPriMap[TrafficClass] > ar->arHiAcStreamActivePri) {
5368 /* set the new highest active priority */
5369 ar->arHiAcStreamActivePri = ar->arAcStreamPriMap[TrafficClass];
5373 /* when a stream goes inactive, we may have to search for the next active stream
5374 * that is the highest priority */
5376 if (ar->arHiAcStreamActivePri == ar->arAcStreamPriMap[TrafficClass]) {
5378 /* the highest priority stream just went inactive */
5380 /* reset and search for the "next" highest "active" priority stream */
5381 ar->arHiAcStreamActivePri = 0;
5382 for (i = 0; i < WMM_NUM_AC; i++) {
5383 if (ar->arAcStreamActive[i]) {
5384 if (ar->arAcStreamPriMap[i] > ar->arHiAcStreamActivePri) {
5385 /* set the new highest active priority */
5386 ar->arHiAcStreamActivePri = ar->arAcStreamPriMap[i];
5393 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
5396 /* for mbox ping testing, the traffic class is mapped directly as a stream ID,
5397 * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c
5398 * convert the stream ID to a endpoint */
5399 eid = arAc2EndpointID(ar, TrafficClass);
5402 /* notify HTC, this may cause credit distribution changes */
5404 HTCIndicateActivityChange(ar->arHtcTarget,
5411 ar6000_btcoex_config_event(struct ar6_softc *ar, A_UINT8 *ptr, A_UINT32 len)
5414 WMI_BTCOEX_CONFIG_EVENT *pBtcoexConfig = (WMI_BTCOEX_CONFIG_EVENT *)ptr;
5415 WMI_BTCOEX_CONFIG_EVENT *pArbtcoexConfig =&ar->arBtcoexConfig;
5417 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 BTCOEX CONFIG EVENT \n"));
5419 A_PRINTF("received config event\n");
5420 pArbtcoexConfig->btProfileType = pBtcoexConfig->btProfileType;
5421 pArbtcoexConfig->linkId = pBtcoexConfig->linkId;
5423 switch (pBtcoexConfig->btProfileType) {
5424 case WMI_BTCOEX_BT_PROFILE_SCO:
5425 A_MEMCPY(&pArbtcoexConfig->info.scoConfigCmd, &pBtcoexConfig->info.scoConfigCmd,
5426 sizeof(WMI_SET_BTCOEX_SCO_CONFIG_CMD));
5428 case WMI_BTCOEX_BT_PROFILE_A2DP:
5429 A_MEMCPY(&pArbtcoexConfig->info.a2dpConfigCmd, &pBtcoexConfig->info.a2dpConfigCmd,
5430 sizeof(WMI_SET_BTCOEX_A2DP_CONFIG_CMD));
5432 case WMI_BTCOEX_BT_PROFILE_ACLCOEX:
5433 A_MEMCPY(&pArbtcoexConfig->info.aclcoexConfig, &pBtcoexConfig->info.aclcoexConfig,
5434 sizeof(WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD));
5436 case WMI_BTCOEX_BT_PROFILE_INQUIRY_PAGE:
5437 A_MEMCPY(&pArbtcoexConfig->info.btinquiryPageConfigCmd, &pBtcoexConfig->info.btinquiryPageConfigCmd,
5438 sizeof(WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD));
5441 if (ar->statsUpdatePending) {
5442 ar->statsUpdatePending = FALSE;
5448 ar6000_btcoex_stats_event(struct ar6_softc *ar, A_UINT8 *ptr, A_UINT32 len)
5450 WMI_BTCOEX_STATS_EVENT *pBtcoexStats = (WMI_BTCOEX_STATS_EVENT *)ptr;
5452 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 BTCOEX CONFIG EVENT \n"));
5454 A_MEMCPY(&ar->arBtcoexStats, pBtcoexStats, sizeof(WMI_BTCOEX_STATS_EVENT));
5456 if (ar->statsUpdatePending) {
5457 ar->statsUpdatePending = FALSE;
5462 module_init(ar6000_init_module);
5463 module_exit(ar6000_cleanup_module);
5465 /* Init cookie queue */
5467 ar6000_cookie_init(AR_SOFTC_T *ar)
5471 ar->arCookieList = NULL;
5472 ar->arCookieCount = 0;
5474 A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem));
5476 for (i = 0; i < MAX_COOKIE_NUM; i++) {
5477 ar6000_free_cookie(ar, &s_ar_cookie_mem[i]);
5481 /* cleanup cookie queue */
5483 ar6000_cookie_cleanup(AR_SOFTC_T *ar)
5485 /* It is gone .... */
5486 ar->arCookieList = NULL;
5487 ar->arCookieCount = 0;
5490 /* Init cookie queue */
5492 ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie)
5495 A_ASSERT(ar != NULL);
5496 A_ASSERT(cookie != NULL);
5498 cookie->arc_list_next = ar->arCookieList;
5499 ar->arCookieList = cookie;
5500 ar->arCookieCount++;
5503 /* cleanup cookie queue */
5504 static struct ar_cookie *
5505 ar6000_alloc_cookie(AR_SOFTC_T *ar)
5507 struct ar_cookie *cookie;
5509 cookie = ar->arCookieList;
5512 ar->arCookieList = cookie->arc_list_next;
5513 ar->arCookieCount--;
5519 #ifdef SEND_EVENT_TO_APP
5521 * This function is used to send event which come from taget to
5522 * the application. The buf which send to application is include
5523 * the event ID and event content.
5525 #define EVENT_ID_LEN 2
5526 void ar6000_send_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId,
5527 A_UINT8 *datap, int len)
5530 #if (WIRELESS_EXT >= 15)
5532 /* note: IWEVCUSTOM only exists in wireless extensions after version 15 */
5536 union iwreq_data wrqu;
5538 size = len + EVENT_ID_LEN;
5540 if (size > IW_CUSTOM_MAX) {
5541 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n",
5542 eventId, size, IW_CUSTOM_MAX));
5546 buf = A_MALLOC_NOWAIT(size);
5548 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: failed to allocate %d bytes\n", __func__, size));
5552 A_MEMZERO(buf, size);
5553 A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
5554 A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
5556 //AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("event ID = %d,len = %d\n",*(A_UINT16*)buf, size));
5557 A_MEMZERO(&wrqu, sizeof(wrqu));
5558 wrqu.data.length = size;
5559 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
5567 * This function is used to send events larger than 256 bytes
5568 * to the application. The buf which is sent to application
5569 * includes the event ID and event content.
5571 void ar6000_send_generic_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId,
5572 A_UINT8 *datap, int len)
5575 #if (WIRELESS_EXT >= 18)
5577 /* IWEVGENIE exists in wireless extensions version 18 onwards */
5581 union iwreq_data wrqu;
5583 size = len + EVENT_ID_LEN;
5585 if (size > IW_GENERIC_IE_MAX) {
5586 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI event ID : 0x%4.4X, len = %d too big for IWEVGENIE (max=%d) \n",
5587 eventId, size, IW_GENERIC_IE_MAX));
5591 buf = A_MALLOC_NOWAIT(size);
5593 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: failed to allocate %d bytes\n", __func__, size));
5597 A_MEMZERO(buf, size);
5598 A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
5599 A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
5601 A_MEMZERO(&wrqu, sizeof(wrqu));
5602 wrqu.data.length = size;
5603 wireless_send_event(ar->arNetDev, IWEVGENIE, &wrqu, buf);
5607 #endif /* (WIRELESS_EXT >= 18) */
5610 #endif /* SEND_EVENT_TO_APP */
5614 ar6000_tx_retry_err_event(void *devt)
5616 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Tx retries reach maximum!\n"));
5620 ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, A_UINT8 snr)
5622 WMI_SNR_THRESHOLD_EVENT event;
5623 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
5625 event.range = newThreshold;
5628 ar6000_send_event_to_app(ar, WMI_SNR_THRESHOLD_EVENTID, (A_UINT8 *)&event,
5629 sizeof(WMI_SNR_THRESHOLD_EVENT));
5633 ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, A_UINT8 lq)
5635 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("lq threshold range %d, lq %d\n", newThreshold, lq));
5641 a_copy_to_user(void *to, const void *from, A_UINT32 n)
5643 return(copy_to_user(to, from, n));
5647 a_copy_from_user(void *to, const void *from, A_UINT32 n)
5649 return(copy_from_user(to, from, n));
5654 ar6000_get_driver_cfg(struct net_device *dev,
5663 case AR6000_DRIVER_CFG_GET_WLANNODECACHING:
5664 *((A_UINT32 *)result) = wlanNodeCaching;
5666 case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS:
5667 *((A_UINT32 *)result) = logWmiRawMsgs;
5678 ar6000_keepalive_rx(void *devt, A_UINT8 configured)
5680 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
5682 ar->arKeepaliveConfigured = configured;
5687 ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, WMI_PMKID *pmkidList,
5692 A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID);
5694 for (i = 0; i < numPMKID; i++) {
5695 A_PRINTF("\nBSSID %d ", i);
5696 for (j = 0; j < ATH_MAC_LEN; j++) {
5697 A_PRINTF("%2.2x", bssidList[j]);
5699 bssidList += (ATH_MAC_LEN + WMI_PMKID_LEN);
5700 A_PRINTF("\nPMKID %d ", i);
5701 for (j = 0; j < WMI_PMKID_LEN; j++) {
5702 A_PRINTF("%2.2x", pmkidList->pmkid[j]);
5704 pmkidList = (WMI_PMKID *)((A_UINT8 *)pmkidList + ATH_MAC_LEN +
5709 void ar6000_pspoll_event(AR_SOFTC_T *ar,A_UINT8 aid)
5712 A_BOOL isPsqEmpty = FALSE;
5714 conn = ieee80211_find_conn_for_aid(ar, aid);
5716 /* If the PS q for this STA is not empty, dequeue and send a pkt from
5717 * the head of the q. Also update the More data bit in the WMI_DATA_HDR
5718 * if there are more pkts for this STA in the PS q. If there are no more
5719 * pkts for this STA, update the PVB for this STA.
5721 A_MUTEX_LOCK(&conn->psqLock);
5722 isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq);
5723 A_MUTEX_UNLOCK(&conn->psqLock);
5726 /* TODO:No buffered pkts for this STA. Send out a NULL data frame */
5728 struct sk_buff *skb = NULL;
5730 A_MUTEX_LOCK(&conn->psqLock);
5731 skb = A_NETBUF_DEQUEUE(&conn->psq);
5732 A_MUTEX_UNLOCK(&conn->psqLock);
5733 /* Set the STA flag to PSPolled, so that the frame will go out */
5734 STA_SET_PS_POLLED(conn);
5735 ar6000_data_tx(skb, ar->arNetDev);
5736 STA_CLR_PS_POLLED(conn);
5738 /* Clear the PVB for this STA if the queue has become empty */
5739 A_MUTEX_LOCK(&conn->psqLock);
5740 isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq);
5741 A_MUTEX_UNLOCK(&conn->psqLock);
5744 wmi_set_pvb_cmd(ar->arWmi, conn->aid, 0);
5749 void ar6000_dtimexpiry_event(AR_SOFTC_T *ar)
5751 A_BOOL isMcastQueued = FALSE;
5752 struct sk_buff *skb = NULL;
5754 /* If there are no associated STAs, ignore the DTIM expiry event.
5755 * There can be potential race conditions where the last associated
5756 * STA may disconnect & before the host could clear the 'Indicate DTIM'
5757 * request to the firmware, the firmware would have just indicated a DTIM
5758 * expiry event. The race is between 'clear DTIM expiry cmd' going
5759 * from the host to the firmware & the DTIM expiry event happening from
5760 * the firmware to the host.
5762 if (ar->sta_list_index == 0) {
5766 A_MUTEX_LOCK(&ar->mcastpsqLock);
5767 isMcastQueued = A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq);
5768 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
5770 A_ASSERT(isMcastQueued == FALSE);
5772 /* Flush the mcast psq to the target */
5773 /* Set the STA flag to DTIMExpired, so that the frame will go out */
5774 ar->DTIMExpired = TRUE;
5776 A_MUTEX_LOCK(&ar->mcastpsqLock);
5777 while (!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) {
5778 skb = A_NETBUF_DEQUEUE(&ar->mcastpsq);
5779 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
5781 ar6000_data_tx(skb, ar->arNetDev);
5783 A_MUTEX_LOCK(&ar->mcastpsqLock);
5785 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
5787 /* Reset the DTIMExpired flag back to 0 */
5788 ar->DTIMExpired = FALSE;
5790 /* Clear the LSB of the BitMapCtl field of the TIM IE */
5791 wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 0);
5795 read_rssi_compensation_param(AR_SOFTC_T *ar)
5797 A_UINT8 *cust_data_ptr;
5799 //#define RSSICOMPENSATION_PRINT
5801 #ifdef RSSICOMPENSATION_PRINT
5803 cust_data_ptr = ar6000_get_cust_data_buffer(ar->arTargetType);
5804 for (i=0; i<16; i++) {
5805 A_PRINTF("cust_data_%d = %x \n", i, *(A_UINT8 *)cust_data_ptr);
5810 cust_data_ptr = ar6000_get_cust_data_buffer(ar->arTargetType);
5812 rssi_compensation_param.customerID = *(A_UINT16 *)cust_data_ptr & 0xffff;
5813 rssi_compensation_param.enable = *(A_UINT16 *)(cust_data_ptr+2) & 0xffff;
5814 rssi_compensation_param.bg_param_a = *(A_UINT16 *)(cust_data_ptr+4) & 0xffff;
5815 rssi_compensation_param.bg_param_b = *(A_UINT16 *)(cust_data_ptr+6) & 0xffff;
5816 rssi_compensation_param.a_param_a = *(A_UINT16 *)(cust_data_ptr+8) & 0xffff;
5817 rssi_compensation_param.a_param_b = *(A_UINT16 *)(cust_data_ptr+10) &0xffff;
5818 rssi_compensation_param.reserved = *(A_UINT32 *)(cust_data_ptr+12);
5820 #ifdef RSSICOMPENSATION_PRINT
5821 A_PRINTF("customerID = 0x%x \n", rssi_compensation_param.customerID);
5822 A_PRINTF("enable = 0x%x \n", rssi_compensation_param.enable);
5823 A_PRINTF("bg_param_a = 0x%x and %d \n", rssi_compensation_param.bg_param_a, rssi_compensation_param.bg_param_a);
5824 A_PRINTF("bg_param_b = 0x%x and %d \n", rssi_compensation_param.bg_param_b, rssi_compensation_param.bg_param_b);
5825 A_PRINTF("a_param_a = 0x%x and %d \n", rssi_compensation_param.a_param_a, rssi_compensation_param.a_param_a);
5826 A_PRINTF("a_param_b = 0x%x and %d \n", rssi_compensation_param.a_param_b, rssi_compensation_param.a_param_b);
5827 A_PRINTF("Last 4 bytes = 0x%x \n", rssi_compensation_param.reserved);
5830 if (rssi_compensation_param.enable != 0x1) {
5831 rssi_compensation_param.enable = 0;
5838 rssi_compensation_calc_tcmd(A_UINT32 freq, A_INT32 rssi, A_UINT32 totalPkt)
5843 if (rssi_compensation_param.enable)
5845 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n"));
5846 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d, totalPkt = %d\n", rssi,totalPkt));
5847 rssi = rssi * rssi_compensation_param.a_param_a + totalPkt * rssi_compensation_param.a_param_b;
5848 rssi = (rssi-50) /100;
5849 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi));
5854 if (rssi_compensation_param.enable)
5856 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n"));
5857 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d, totalPkt = %d\n", rssi,totalPkt));
5858 rssi = rssi * rssi_compensation_param.bg_param_a + totalPkt * rssi_compensation_param.bg_param_b;
5859 rssi = (rssi-50) /100;
5860 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi));
5868 rssi_compensation_calc(AR_SOFTC_T *ar, A_INT16 rssi)
5870 if (ar->arBssChannel > 5000)
5872 if (rssi_compensation_param.enable)
5874 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n"));
5875 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d\n", rssi));
5876 rssi = rssi * rssi_compensation_param.a_param_a + rssi_compensation_param.a_param_b;
5877 rssi = (rssi-50) /100;
5878 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi));
5883 if (rssi_compensation_param.enable)
5885 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n"));
5886 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d\n", rssi));
5887 rssi = rssi * rssi_compensation_param.bg_param_a + rssi_compensation_param.bg_param_b;
5888 rssi = (rssi-50) /100;
5889 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi));
5897 rssi_compensation_reverse_calc(AR_SOFTC_T *ar, A_INT16 rssi, A_BOOL Above)
5901 if (ar->arBssChannel > 5000)
5903 if (rssi_compensation_param.enable)
5905 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n"));
5906 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before rev compensation = %d\n", rssi));
5908 rssi = (rssi - rssi_compensation_param.a_param_b) / rssi_compensation_param.a_param_a;
5909 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after rev compensation = %d\n", rssi));
5914 if (rssi_compensation_param.enable)
5916 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n"));
5917 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before rev compensation = %d\n", rssi));
5920 for (i=95; i>=0; i--) {
5921 if (rssi <= rssi_compensation_table[i]) {
5927 for (i=0; i<=95; i++) {
5928 if (rssi >= rssi_compensation_table[i]) {
5934 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after rev compensation = %d\n", rssi));
5942 void ap_wapi_rekey_event(AR_SOFTC_T *ar, A_UINT8 type, A_UINT8 *mac)
5944 union iwreq_data wrqu;
5947 A_MEMZERO(buf, sizeof(buf));
5949 strcpy(buf, "WAPI_REKEY");
5951 A_MEMCPY(&buf[11], mac, ATH_MAC_LEN);
5953 A_MEMZERO(&wrqu, sizeof(wrqu));
5954 wrqu.data.length = 10+1+ATH_MAC_LEN;
5955 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
5957 A_PRINTF("WAPI REKEY - %d - %02x:%02x\n", type, mac[4], mac[5]);
5964 ar6000_reinstall_keys(AR_SOFTC_T *ar, A_UINT8 key_op_ctrl)
5966 A_STATUS status = A_OK;
5967 struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik;
5968 struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik;
5969 CRYPTO_TYPE keyType = ar->user_saved_keys.keyType;
5971 if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) {
5972 if (NONE_CRYPT == keyType) {
5973 goto _reinstall_keys_out;
5976 if (uik->ik_keylen) {
5977 status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix,
5978 ar->user_saved_keys.keyType, PAIRWISE_USAGE,
5979 uik->ik_keylen, (A_UINT8 *)&uik->ik_keyrsc,
5980 uik->ik_keydata, key_op_ctrl, uik->ik_macaddr, SYNC_BEFORE_WMIFLAG);
5984 status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata);
5987 if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) {
5988 if (NONE_CRYPT == keyType) {
5989 goto _reinstall_keys_out;
5992 if (bik->ik_keylen) {
5993 status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix,
5994 ar->user_saved_keys.keyType, GROUP_USAGE,
5995 bik->ik_keylen, (A_UINT8 *)&bik->ik_keyrsc,
5996 bik->ik_keydata, key_op_ctrl, bik->ik_macaddr, NO_SYNC_WMIFLAG);
5999 status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata);
6002 _reinstall_keys_out:
6003 ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
6004 ar->user_key_ctrl = 0;
6008 #endif /* USER_KEYS */
6012 ar6000_dset_open_req(
6015 A_UINT32 targHandle,
6016 A_UINT32 targReplyFn,
6017 A_UINT32 targReplyArg)
6024 A_UINT32 access_cookie)
6030 ar6000_dset_data_req(
6032 A_UINT32 accessCookie,
6036 A_UINT32 targReplyFn,
6037 A_UINT32 targReplyArg)
6042 ar6000_ap_mode_profile_commit(struct ar6_softc *ar)
6045 unsigned long flags;
6047 /* No change in AP's profile configuration */
6048 if(ar->ap_profile_flag==0) {
6049 A_PRINTF("COMMIT: No change in profile!!!\n");
6053 if(!ar->arSsidLen) {
6054 A_PRINTF("SSID not set!!!\n");
6058 switch(ar->arAuthMode) {
6060 if((ar->arPairwiseCrypto != NONE_CRYPT) &&
6062 (ar->arPairwiseCrypto != WAPI_CRYPT) &&
6064 (ar->arPairwiseCrypto != WEP_CRYPT)) {
6065 A_PRINTF("Cipher not supported in AP mode Open auth\n");
6071 case (WPA_PSK_AUTH|WPA2_PSK_AUTH):
6074 A_PRINTF("This key mgmt type not supported in AP mode\n");
6078 /* Update the arNetworkType */
6079 ar->arNetworkType = ar->arNextMode;
6081 A_MEMZERO(&p,sizeof(p));
6082 p.ssidLength = ar->arSsidLen;
6083 A_MEMCPY(p.ssid,ar->arSsid,p.ssidLength);
6084 p.channel = ar->arChannelHint;
6085 p.networkType = ar->arNetworkType;
6087 p.dot11AuthMode = ar->arDot11AuthMode;
6088 p.authMode = ar->arAuthMode;
6089 p.pairwiseCryptoType = ar->arPairwiseCrypto;
6090 p.pairwiseCryptoLen = ar->arPairwiseCryptoLen;
6091 p.groupCryptoType = ar->arGroupCrypto;
6092 p.groupCryptoLen = ar->arGroupCryptoLen;
6093 p.ctrl_flags = ar->arConnectCtrlFlags;
6095 ar->arConnected = FALSE;
6097 wmi_ap_profile_commit(ar->arWmi, &p);
6098 spin_lock_irqsave(&ar->arLock, flags);
6099 ar->arConnected = TRUE;
6100 netif_carrier_on(ar->arNetDev);
6101 spin_unlock_irqrestore(&ar->arLock, flags);
6102 ar->ap_profile_flag = 0;
6107 ar6000_connect_to_ap(struct ar6_softc *ar)
6109 /* The ssid length check prevents second "essid off" from the user,
6110 to be treated as a connect cmd. The second "essid off" is ignored.
6112 if((ar->arWmiReady == TRUE) && (ar->arSsidLen > 0) && ar->arNetworkType!=AP_NETWORK)
6115 if((ADHOC_NETWORK != ar->arNetworkType) &&
6116 (NONE_AUTH==ar->arAuthMode) &&
6117 (WEP_CRYPT==ar->arPairwiseCrypto)) {
6118 ar6000_install_static_wep_keys(ar);
6121 if (!ar->arUserBssFilter) {
6122 if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) {
6127 if (ar->arWapiEnable) {
6128 ar->arPairwiseCrypto = WAPI_CRYPT;
6129 ar->arPairwiseCryptoLen = 0;
6130 ar->arGroupCrypto = WAPI_CRYPT;
6131 ar->arGroupCryptoLen = 0;
6132 ar->arAuthMode = NONE_AUTH;
6133 ar->arConnectCtrlFlags |= CONNECT_IGNORE_WPAx_GROUP_CIPHER;
6136 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("Connect called with authmode %d dot11 auth %d"\
6137 " PW crypto %d PW crypto Len %d GRP crypto %d"\
6138 " GRP crypto Len %d\n",
6139 ar->arAuthMode, ar->arDot11AuthMode,
6140 ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
6141 ar->arGroupCrypto, ar->arGroupCryptoLen));
6143 /* Set the listen interval into 1000TUs or more. This value will be indicated to Ap in the conn.
6144 later set it back locally at the STA to 100/1000 TUs depending on the power mode */
6145 if ((ar->arNetworkType == INFRA_NETWORK)) {
6146 wmi_listeninterval_cmd(ar->arWmi, max(ar->arListenIntervalT, (A_UINT16)A_MAX_WOW_LISTEN_INTERVAL), 0);
6148 status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
6149 ar->arDot11AuthMode, ar->arAuthMode,
6150 ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
6151 ar->arGroupCrypto,ar->arGroupCryptoLen,
6152 ar->arSsidLen, ar->arSsid,
6153 ar->arReqBssid, ar->arChannelHint,
6154 ar->arConnectCtrlFlags);
6155 if (status != A_OK) {
6156 wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB);
6157 if (!ar->arUserBssFilter) {
6158 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
6163 if ((!(ar->arConnectCtrlFlags & CONNECT_DO_WPA_OFFLOAD)) &&
6164 ((WPA_PSK_AUTH == ar->arAuthMode) || (WPA2_PSK_AUTH == ar->arAuthMode)))
6166 A_TIMEOUT_MS(&ar->disconnect_timer, A_DISCONNECT_TIMER_INTERVAL, 0);
6169 ar->arConnectCtrlFlags &= ~CONNECT_DO_WPA_OFFLOAD;
6171 ar->arConnectPending = TRUE;
6178 ar6000_ap_mode_get_wpa_ie(struct ar6_softc *ar, struct ieee80211req_wpaie *wpaie)
6181 conn = ieee80211_find_conn(ar, wpaie->wpa_macaddr);
6183 A_MEMZERO(wpaie->wpa_ie, IEEE80211_MAX_IE);
6184 A_MEMZERO(wpaie->rsn_ie, IEEE80211_MAX_IE);
6187 A_MEMCPY(wpaie->wpa_ie, conn->wpa_ie, IEEE80211_MAX_IE);
6194 is_iwioctl_allowed(A_UINT8 mode, A_UINT16 cmd)
6196 if(cmd >= SIOCSIWCOMMIT && cmd <= SIOCGIWPOWER) {
6197 cmd -= SIOCSIWCOMMIT;
6198 if(sioctl_filter[cmd] == 0xFF) return A_OK;
6199 if(sioctl_filter[cmd] & mode) return A_OK;
6200 } else if(cmd >= SIOCIWFIRSTPRIV && cmd <= (SIOCIWFIRSTPRIV+30)) {
6201 cmd -= SIOCIWFIRSTPRIV;
6202 if(pioctl_filter[cmd] == 0xFF) return A_OK;
6203 if(pioctl_filter[cmd] & mode) return A_OK;
6211 is_xioctl_allowed(A_UINT8 mode, int cmd)
6213 if(sizeof(xioctl_filter)-1 < cmd) {
6214 A_PRINTF("Filter for this cmd=%d not defined\n",cmd);
6217 if(xioctl_filter[cmd] == 0xFF) return A_OK;
6218 if(xioctl_filter[cmd] & mode) return A_OK;
6224 ap_set_wapi_key(struct ar6_softc *ar, void *ikey)
6226 struct ieee80211req_key *ik = (struct ieee80211req_key *)ikey;
6227 KEY_USAGE keyUsage = 0;
6230 if (A_MEMCMP(ik->ik_macaddr, bcast_mac, IEEE80211_ADDR_LEN) == 0) {
6231 keyUsage = GROUP_USAGE;
6233 keyUsage = PAIRWISE_USAGE;
6235 A_PRINTF("WAPI_KEY: Type:%d ix:%d mac:%02x:%02x len:%d\n",
6236 keyUsage, ik->ik_keyix, ik->ik_macaddr[4], ik->ik_macaddr[5],
6239 status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, WAPI_CRYPT, keyUsage,
6240 ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc,
6241 ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr,
6244 if (A_OK != status) {
6251 void ar6000_peer_event(
6258 for (pos=0;pos<6;pos++)
6259 printk("%02x: ",*(macAddr+pos));
6263 #ifdef HTC_TEST_SEND_PKTS
6264 #define HTC_TEST_DUPLICATE 8
6265 static void DoHTCSendPktsTest(AR_SOFTC_T *ar, int MapNo, HTC_ENDPOINT_ID eid, struct sk_buff *dupskb)
6267 struct ar_cookie *cookie;
6268 struct ar_cookie *cookieArray[HTC_TEST_DUPLICATE];
6269 struct sk_buff *new_skb;
6272 HTC_PACKET_QUEUE pktQueue;
6273 EPPING_HEADER *eppingHdr;
6275 eppingHdr = A_NETBUF_DATA(dupskb);
6277 if (eppingHdr->Cmd_h == EPPING_CMD_NO_ECHO) {
6278 /* skip test if this is already a tx perf test */
6282 for (i = 0; i < HTC_TEST_DUPLICATE; i++,pkts++) {
6283 AR6000_SPIN_LOCK(&ar->arLock, 0);
6284 cookie = ar6000_alloc_cookie(ar);
6285 if (cookie != NULL) {
6286 ar->arTxPending[eid]++;
6287 ar->arTotalTxDataPending++;
6290 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
6292 if (NULL == cookie) {
6296 new_skb = A_NETBUF_ALLOC(A_NETBUF_LEN(dupskb));
6298 if (new_skb == NULL) {
6299 AR6000_SPIN_LOCK(&ar->arLock, 0);
6300 ar6000_free_cookie(ar,cookie);
6301 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
6305 A_NETBUF_PUT_DATA(new_skb, A_NETBUF_DATA(dupskb), A_NETBUF_LEN(dupskb));
6306 cookie->arc_bp[0] = (unsigned long)new_skb;
6307 cookie->arc_bp[1] = MapNo;
6308 SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
6310 A_NETBUF_DATA(new_skb),
6311 A_NETBUF_LEN(new_skb),
6315 cookieArray[i] = cookie;
6318 EPPING_HEADER *pHdr = (EPPING_HEADER *)A_NETBUF_DATA(new_skb);
6319 pHdr->Cmd_h = EPPING_CMD_NO_ECHO; /* do not echo the packet */
6327 INIT_HTC_PACKET_QUEUE(&pktQueue);
6329 for (i = 0; i < pkts; i++) {
6330 HTC_PACKET_ENQUEUE(&pktQueue,&cookieArray[i]->HtcPkt);
6333 HTCSendPktsMultiple(ar->arHtcTarget, &pktQueue);
6338 #ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT
6340 * Add support for adding and removing a virtual adapter for soft AP.
6341 * Some OS requires different adapters names for station and soft AP mode.
6342 * To support these requirement, create and destory a netdevice instance
6343 * when the AP mode is operational. A full fledged support for virual device
6344 * is not implemented. Rather a virtual interface is created and is linked
6345 * with the existing physical device instance during the operation of the
6349 A_STATUS ar6000_start_ap_interface(AR_SOFTC_T *ar)
6351 AR_VIRTUAL_INTERFACE_T *arApDev;
6353 /* Change net_device to point to AP instance */
6354 arApDev = (AR_VIRTUAL_INTERFACE_T *)ar->arApDev;
6355 ar->arNetDev = arApDev->arNetDev;
6360 A_STATUS ar6000_stop_ap_interface(AR_SOFTC_T *ar)
6362 AR_VIRTUAL_INTERFACE_T *arApDev;
6364 /* Change net_device to point to sta instance */
6365 arApDev = (AR_VIRTUAL_INTERFACE_T *)ar->arApDev;
6367 ar->arNetDev = arApDev->arStaNetDev;
6374 A_STATUS ar6000_create_ap_interface(AR_SOFTC_T *ar, char *ap_ifname)
6376 struct net_device *dev;
6377 AR_VIRTUAL_INTERFACE_T *arApDev;
6379 dev = alloc_etherdev(sizeof(AR_VIRTUAL_INTERFACE_T));
6381 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: can't alloc etherdev\n"));
6386 init_netdev(dev, ap_ifname);
6388 if (register_netdev(dev)) {
6389 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: register_netdev failed\n"));
6393 arApDev = netdev_priv(dev);
6394 arApDev->arDev = ar;
6395 arApDev->arNetDev = dev;
6396 arApDev->arStaNetDev = ar->arNetDev;
6398 ar->arApDev = arApDev;
6401 /* Copy the MAC address */
6402 A_MEMCPY(dev->dev_addr, ar->arNetDev->dev_addr, AR6000_ETH_ADDR_LEN);
6407 A_STATUS ar6000_add_ap_interface(AR_SOFTC_T *ar, char *ap_ifname)
6409 /* Interface already added, need not proceed further */
6410 if (ar->arApDev != NULL) {
6411 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_add_ap_interface: interface already present \n"));
6415 if (ar6000_create_ap_interface(ar, ap_ifname) != A_OK) {
6419 A_PRINTF("Add AP interface %s \n",ap_ifname);
6421 return ar6000_start_ap_interface(ar);
6424 A_STATUS ar6000_remove_ap_interface(AR_SOFTC_T *ar)
6427 ar6000_stop_ap_interface(ar);
6429 unregister_netdev(arApNetDev);
6433 free_netdev(apApNetDev);
6436 A_PRINTF("Remove AP interface\n");
6444 #endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
6447 #ifdef EXPORT_HCI_BRIDGE_INTERFACE
6448 EXPORT_SYMBOL(setupbtdev);