2 * sd.c Copyright (C) 1992 Drew Eckhardt
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
5 * Linux scsi disk driver
6 * Initial versions: Drew Eckhardt
7 * Subsequent revisions: Eric Youngdale
8 * Modification history:
9 * - Drew Eckhardt <drew@colorado.edu> original
10 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
11 * outstanding request, and other enhancements.
12 * Support loadable low-level scsi drivers.
13 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
14 * eight major numbers.
15 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
16 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
17 * sd_init and cleanups.
18 * - Alex Davis <letmein@erols.com> Fix problem where partition info
19 * not being read in sd_open. Fix problem where removable media
20 * could be ejected after sd_open.
21 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
22 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
23 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
24 * Support 32k/1M disks.
26 * Logging policy (needs CONFIG_SCSI_LOGGING defined):
27 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
28 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
29 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1
30 * - entering other commands: SCSI_LOG_HLQUEUE level 3
31 * Note: when the logging level is set by the user, it must be greater
32 * than the level indicated above to trigger output.
35 #include <linux/module.h>
37 #include <linux/kernel.h>
39 #include <linux/bio.h>
40 #include <linux/genhd.h>
41 #include <linux/hdreg.h>
42 #include <linux/errno.h>
43 #include <linux/idr.h>
44 #include <linux/interrupt.h>
45 #include <linux/init.h>
46 #include <linux/blkdev.h>
47 #include <linux/blkpg.h>
48 #include <linux/delay.h>
49 #include <linux/mutex.h>
50 #include <linux/string_helpers.h>
51 #include <linux/async.h>
52 #include <linux/slab.h>
53 #include <asm/uaccess.h>
54 #include <asm/unaligned.h>
56 #include <scsi/scsi.h>
57 #include <scsi/scsi_cmnd.h>
58 #include <scsi/scsi_dbg.h>
59 #include <scsi/scsi_device.h>
60 #include <scsi/scsi_driver.h>
61 #include <scsi/scsi_eh.h>
62 #include <scsi/scsi_host.h>
63 #include <scsi/scsi_ioctl.h>
64 #include <scsi/scsicam.h>
67 #include "scsi_logging.h"
69 MODULE_AUTHOR("Eric Youngdale");
70 MODULE_DESCRIPTION("SCSI disk (sd) driver");
71 MODULE_LICENSE("GPL");
73 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
74 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
75 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
76 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
77 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
89 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
90 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
91 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
93 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
99 static void sd_config_discard(struct scsi_disk *, unsigned int);
100 static int sd_revalidate_disk(struct gendisk *);
101 static void sd_unlock_native_capacity(struct gendisk *disk);
102 static int sd_probe(struct device *);
103 static int sd_remove(struct device *);
104 static void sd_shutdown(struct device *);
105 static int sd_suspend(struct device *, pm_message_t state);
106 static int sd_resume(struct device *);
107 static void sd_rescan(struct device *);
108 static int sd_done(struct scsi_cmnd *);
109 static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
110 static void scsi_disk_release(struct device *cdev);
111 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
112 static void sd_print_result(struct scsi_disk *, int);
114 static DEFINE_SPINLOCK(sd_index_lock);
115 static DEFINE_IDA(sd_index_ida);
117 /* This semaphore is used to mediate the 0->1 reference get in the
118 * face of object destruction (i.e. we can't allow a get on an
119 * object after last put) */
120 static DEFINE_MUTEX(sd_ref_mutex);
122 static struct kmem_cache *sd_cdb_cache;
123 static mempool_t *sd_cdb_pool;
125 static const char *sd_cache_types[] = {
126 "write through", "none", "write back",
127 "write back, no read (daft)"
131 sd_store_cache_type(struct device *dev, struct device_attribute *attr,
132 const char *buf, size_t count)
134 int i, ct = -1, rcd, wce, sp;
135 struct scsi_disk *sdkp = to_scsi_disk(dev);
136 struct scsi_device *sdp = sdkp->device;
139 struct scsi_mode_data data;
140 struct scsi_sense_hdr sshdr;
141 static const char temp[] = "temporary ";
144 if (sdp->type != TYPE_DISK)
145 /* no cache control on RBC devices; theoretically they
146 * can do it, but there's probably so many exceptions
147 * it's not worth the risk */
150 if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
151 buf += sizeof(temp) - 1;
152 sdkp->cache_override = 1;
154 sdkp->cache_override = 0;
157 for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
158 len = strlen(sd_cache_types[i]);
159 if (strncmp(sd_cache_types[i], buf, len) == 0 &&
167 rcd = ct & 0x01 ? 1 : 0;
168 wce = ct & 0x02 ? 1 : 0;
170 if (sdkp->cache_override) {
176 if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
177 SD_MAX_RETRIES, &data, NULL))
179 len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
180 data.block_descriptor_length);
181 buffer_data = buffer + data.header_length +
182 data.block_descriptor_length;
183 buffer_data[2] &= ~0x05;
184 buffer_data[2] |= wce << 2 | rcd;
185 sp = buffer_data[0] & 0x80 ? 1 : 0;
187 if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
188 SD_MAX_RETRIES, &data, &sshdr)) {
189 if (scsi_sense_valid(&sshdr))
190 sd_print_sense_hdr(sdkp, &sshdr);
193 revalidate_disk(sdkp->disk);
198 sd_store_manage_start_stop(struct device *dev, struct device_attribute *attr,
199 const char *buf, size_t count)
201 struct scsi_disk *sdkp = to_scsi_disk(dev);
202 struct scsi_device *sdp = sdkp->device;
204 if (!capable(CAP_SYS_ADMIN))
207 sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
213 sd_store_allow_restart(struct device *dev, struct device_attribute *attr,
214 const char *buf, size_t count)
216 struct scsi_disk *sdkp = to_scsi_disk(dev);
217 struct scsi_device *sdp = sdkp->device;
219 if (!capable(CAP_SYS_ADMIN))
222 if (sdp->type != TYPE_DISK)
225 sdp->allow_restart = simple_strtoul(buf, NULL, 10);
231 sd_show_cache_type(struct device *dev, struct device_attribute *attr,
234 struct scsi_disk *sdkp = to_scsi_disk(dev);
235 int ct = sdkp->RCD + 2*sdkp->WCE;
237 return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
241 sd_show_fua(struct device *dev, struct device_attribute *attr, char *buf)
243 struct scsi_disk *sdkp = to_scsi_disk(dev);
245 return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
249 sd_show_manage_start_stop(struct device *dev, struct device_attribute *attr,
252 struct scsi_disk *sdkp = to_scsi_disk(dev);
253 struct scsi_device *sdp = sdkp->device;
255 return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
259 sd_show_allow_restart(struct device *dev, struct device_attribute *attr,
262 struct scsi_disk *sdkp = to_scsi_disk(dev);
264 return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
268 sd_show_protection_type(struct device *dev, struct device_attribute *attr,
271 struct scsi_disk *sdkp = to_scsi_disk(dev);
273 return snprintf(buf, 20, "%u\n", sdkp->protection_type);
277 sd_show_protection_mode(struct device *dev, struct device_attribute *attr,
280 struct scsi_disk *sdkp = to_scsi_disk(dev);
281 struct scsi_device *sdp = sdkp->device;
282 unsigned int dif, dix;
284 dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
285 dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
287 if (!dix && scsi_host_dix_capable(sdp->host, SD_DIF_TYPE0_PROTECTION)) {
293 return snprintf(buf, 20, "none\n");
295 return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif);
299 sd_show_app_tag_own(struct device *dev, struct device_attribute *attr,
302 struct scsi_disk *sdkp = to_scsi_disk(dev);
304 return snprintf(buf, 20, "%u\n", sdkp->ATO);
308 sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr,
311 struct scsi_disk *sdkp = to_scsi_disk(dev);
313 return snprintf(buf, 20, "%u\n", sdkp->lbpme);
316 static const char *lbp_mode[] = {
317 [SD_LBP_FULL] = "full",
318 [SD_LBP_UNMAP] = "unmap",
319 [SD_LBP_WS16] = "writesame_16",
320 [SD_LBP_WS10] = "writesame_10",
321 [SD_LBP_ZERO] = "writesame_zero",
322 [SD_LBP_DISABLE] = "disabled",
326 sd_show_provisioning_mode(struct device *dev, struct device_attribute *attr,
329 struct scsi_disk *sdkp = to_scsi_disk(dev);
331 return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]);
335 sd_store_provisioning_mode(struct device *dev, struct device_attribute *attr,
336 const char *buf, size_t count)
338 struct scsi_disk *sdkp = to_scsi_disk(dev);
339 struct scsi_device *sdp = sdkp->device;
341 if (!capable(CAP_SYS_ADMIN))
344 if (sdp->type != TYPE_DISK)
347 if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20))
348 sd_config_discard(sdkp, SD_LBP_UNMAP);
349 else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20))
350 sd_config_discard(sdkp, SD_LBP_WS16);
351 else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20))
352 sd_config_discard(sdkp, SD_LBP_WS10);
353 else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20))
354 sd_config_discard(sdkp, SD_LBP_ZERO);
355 else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20))
356 sd_config_discard(sdkp, SD_LBP_DISABLE);
363 static struct device_attribute sd_disk_attrs[] = {
364 __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
365 sd_store_cache_type),
366 __ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
367 __ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
368 sd_store_allow_restart),
369 __ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
370 sd_store_manage_start_stop),
371 __ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL),
372 __ATTR(protection_mode, S_IRUGO, sd_show_protection_mode, NULL),
373 __ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL),
374 __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL),
375 __ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode,
376 sd_store_provisioning_mode),
380 static struct class sd_disk_class = {
382 .owner = THIS_MODULE,
383 .dev_release = scsi_disk_release,
384 .dev_attrs = sd_disk_attrs,
387 static struct scsi_driver sd_template = {
388 .owner = THIS_MODULE,
393 .suspend = sd_suspend,
395 .shutdown = sd_shutdown,
402 * Device no to disk mapping:
404 * major disc2 disc p1
405 * |............|.............|....|....| <- dev_t
408 * Inside a major, we have 16k disks, however mapped non-
409 * contiguously. The first 16 disks are for major0, the next
410 * ones with major1, ... Disk 256 is for major0 again, disk 272
412 * As we stay compatible with our numbering scheme, we can reuse
413 * the well-know SCSI majors 8, 65--71, 136--143.
415 static int sd_major(int major_idx)
419 return SCSI_DISK0_MAJOR;
421 return SCSI_DISK1_MAJOR + major_idx - 1;
423 return SCSI_DISK8_MAJOR + major_idx - 8;
426 return 0; /* shut up gcc */
430 static struct scsi_disk *__scsi_disk_get(struct gendisk *disk)
432 struct scsi_disk *sdkp = NULL;
434 if (disk->private_data) {
435 sdkp = scsi_disk(disk);
436 if (scsi_device_get(sdkp->device) == 0)
437 get_device(&sdkp->dev);
444 static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
446 struct scsi_disk *sdkp;
448 mutex_lock(&sd_ref_mutex);
449 sdkp = __scsi_disk_get(disk);
450 mutex_unlock(&sd_ref_mutex);
454 static struct scsi_disk *scsi_disk_get_from_dev(struct device *dev)
456 struct scsi_disk *sdkp;
458 mutex_lock(&sd_ref_mutex);
459 sdkp = dev_get_drvdata(dev);
461 sdkp = __scsi_disk_get(sdkp->disk);
462 mutex_unlock(&sd_ref_mutex);
466 static void scsi_disk_put(struct scsi_disk *sdkp)
468 struct scsi_device *sdev = sdkp->device;
470 mutex_lock(&sd_ref_mutex);
471 put_device(&sdkp->dev);
472 scsi_device_put(sdev);
473 mutex_unlock(&sd_ref_mutex);
476 static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
478 unsigned int prot_op = SCSI_PROT_NORMAL;
479 unsigned int dix = scsi_prot_sg_count(scmd);
481 if (scmd->sc_data_direction == DMA_FROM_DEVICE) {
483 prot_op = SCSI_PROT_READ_PASS;
484 else if (dif && !dix)
485 prot_op = SCSI_PROT_READ_STRIP;
486 else if (!dif && dix)
487 prot_op = SCSI_PROT_READ_INSERT;
490 prot_op = SCSI_PROT_WRITE_PASS;
491 else if (dif && !dix)
492 prot_op = SCSI_PROT_WRITE_INSERT;
493 else if (!dif && dix)
494 prot_op = SCSI_PROT_WRITE_STRIP;
497 scsi_set_prot_op(scmd, prot_op);
498 scsi_set_prot_type(scmd, dif);
501 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
503 struct request_queue *q = sdkp->disk->queue;
504 unsigned int logical_block_size = sdkp->device->sector_size;
505 unsigned int max_blocks = 0;
507 q->limits.discard_zeroes_data = sdkp->lbprz;
508 q->limits.discard_alignment = sdkp->unmap_alignment *
510 q->limits.discard_granularity =
511 max(sdkp->physical_block_size,
512 sdkp->unmap_granularity * logical_block_size);
517 q->limits.max_discard_sectors = 0;
518 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
522 max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff);
526 max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff);
530 max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
534 max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
535 q->limits.discard_zeroes_data = 1;
539 q->limits.max_discard_sectors = max_blocks * (logical_block_size >> 9);
540 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
542 sdkp->provisioning_mode = mode;
546 * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
547 * @sdp: scsi device to operate one
548 * @rq: Request to prepare
550 * Will issue either UNMAP or WRITE SAME(16) depending on preference
551 * indicated by target device.
553 static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
555 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
556 struct bio *bio = rq->bio;
557 sector_t sector = bio->bi_sector;
558 unsigned int nr_sectors = bio_sectors(bio);
564 if (sdkp->device->sector_size == 4096) {
569 rq->timeout = SD_TIMEOUT;
571 memset(rq->cmd, 0, rq->cmd_len);
573 page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
575 return BLKPREP_DEFER;
577 switch (sdkp->provisioning_mode) {
579 buf = page_address(page);
585 put_unaligned_be16(6 + 16, &buf[0]);
586 put_unaligned_be16(16, &buf[2]);
587 put_unaligned_be64(sector, &buf[8]);
588 put_unaligned_be32(nr_sectors, &buf[16]);
595 rq->cmd[0] = WRITE_SAME_16;
596 rq->cmd[1] = 0x8; /* UNMAP */
597 put_unaligned_be64(sector, &rq->cmd[2]);
598 put_unaligned_be32(nr_sectors, &rq->cmd[10]);
600 len = sdkp->device->sector_size;
606 rq->cmd[0] = WRITE_SAME;
607 if (sdkp->provisioning_mode == SD_LBP_WS10)
608 rq->cmd[1] = 0x8; /* UNMAP */
609 put_unaligned_be32(sector, &rq->cmd[2]);
610 put_unaligned_be16(nr_sectors, &rq->cmd[7]);
612 len = sdkp->device->sector_size;
620 blk_add_request_payload(rq, page, len);
621 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
622 rq->buffer = page_address(page);
625 if (ret != BLKPREP_OK) {
632 static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
634 rq->timeout = SD_FLUSH_TIMEOUT;
635 rq->retries = SD_MAX_RETRIES;
636 rq->cmd[0] = SYNCHRONIZE_CACHE;
639 return scsi_setup_blk_pc_cmnd(sdp, rq);
642 static void sd_unprep_fn(struct request_queue *q, struct request *rq)
644 struct scsi_cmnd *SCpnt = rq->special;
646 if (rq->cmd_flags & REQ_DISCARD) {
647 free_page((unsigned long)rq->buffer);
650 if (SCpnt->cmnd != rq->cmd) {
651 mempool_free(SCpnt->cmnd, sd_cdb_pool);
658 * sd_init_command - build a scsi (read or write) command from
659 * information in the request structure.
660 * @SCpnt: pointer to mid-level's per scsi command structure that
661 * contains request and into which the scsi command is written
663 * Returns 1 if successful and 0 if error (or cannot be done now).
665 static int sd_prep_fn(struct request_queue *q, struct request *rq)
667 struct scsi_cmnd *SCpnt;
668 struct scsi_device *sdp = q->queuedata;
669 struct gendisk *disk = rq->rq_disk;
670 struct scsi_disk *sdkp;
671 sector_t block = blk_rq_pos(rq);
673 unsigned int this_count = blk_rq_sectors(rq);
675 unsigned char protect;
678 * Discard request come in as REQ_TYPE_FS but we turn them into
679 * block PC requests to make life easier.
681 if (rq->cmd_flags & REQ_DISCARD) {
682 ret = scsi_setup_discard_cmnd(sdp, rq);
684 } else if (rq->cmd_flags & REQ_FLUSH) {
685 ret = scsi_setup_flush_cmnd(sdp, rq);
687 } else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
688 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
690 } else if (rq->cmd_type != REQ_TYPE_FS) {
694 ret = scsi_setup_fs_cmnd(sdp, rq);
695 if (ret != BLKPREP_OK)
698 sdkp = scsi_disk(disk);
700 /* from here on until we're complete, any goto out
701 * is used for a killable error condition */
704 SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
705 "sd_init_command: block=%llu, "
707 (unsigned long long)block,
710 if (!sdp || !scsi_device_online(sdp) ||
711 block + blk_rq_sectors(rq) > get_capacity(disk)) {
712 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
713 "Finishing %u sectors\n",
714 blk_rq_sectors(rq)));
715 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
716 "Retry with 0x%p\n", SCpnt));
722 * quietly refuse to do anything to a changed disc until
723 * the changed bit has been reset
725 /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
730 * Some SD card readers can't handle multi-sector accesses which touch
731 * the last one or two hardware sectors. Split accesses as needed.
733 threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
734 (sdp->sector_size / 512);
736 if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
737 if (block < threshold) {
738 /* Access up to the threshold but not beyond */
739 this_count = threshold - block;
741 /* Access only a single hardware sector */
742 this_count = sdp->sector_size / 512;
746 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
747 (unsigned long long)block));
750 * If we have a 1K hardware sectorsize, prevent access to single
751 * 512 byte sectors. In theory we could handle this - in fact
752 * the scsi cdrom driver must be able to handle this because
753 * we typically use 1K blocksizes, and cdroms typically have
754 * 2K hardware sectorsizes. Of course, things are simpler
755 * with the cdrom, since it is read-only. For performance
756 * reasons, the filesystems should be able to handle this
757 * and not force the scsi disk driver to use bounce buffers
760 if (sdp->sector_size == 1024) {
761 if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
762 scmd_printk(KERN_ERR, SCpnt,
763 "Bad block number requested\n");
767 this_count = this_count >> 1;
770 if (sdp->sector_size == 2048) {
771 if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
772 scmd_printk(KERN_ERR, SCpnt,
773 "Bad block number requested\n");
777 this_count = this_count >> 2;
780 if (sdp->sector_size == 4096) {
781 if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
782 scmd_printk(KERN_ERR, SCpnt,
783 "Bad block number requested\n");
787 this_count = this_count >> 3;
790 if (rq_data_dir(rq) == WRITE) {
791 if (!sdp->writeable) {
794 SCpnt->cmnd[0] = WRITE_6;
795 SCpnt->sc_data_direction = DMA_TO_DEVICE;
797 if (blk_integrity_rq(rq) &&
798 sd_dif_prepare(rq, block, sdp->sector_size) == -EIO)
801 } else if (rq_data_dir(rq) == READ) {
802 SCpnt->cmnd[0] = READ_6;
803 SCpnt->sc_data_direction = DMA_FROM_DEVICE;
805 scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
809 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
810 "%s %d/%u 512 byte blocks.\n",
811 (rq_data_dir(rq) == WRITE) ?
812 "writing" : "reading", this_count,
813 blk_rq_sectors(rq)));
815 /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
816 host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
822 if (host_dif == SD_DIF_TYPE2_PROTECTION) {
823 SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
825 if (unlikely(SCpnt->cmnd == NULL)) {
830 SCpnt->cmd_len = SD_EXT_CDB_SIZE;
831 memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
832 SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
833 SCpnt->cmnd[7] = 0x18;
834 SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
835 SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
838 SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
839 SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
840 SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
841 SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
842 SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
843 SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
844 SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
845 SCpnt->cmnd[19] = (unsigned char) block & 0xff;
847 /* Expected Indirect LBA */
848 SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
849 SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
850 SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
851 SCpnt->cmnd[23] = (unsigned char) block & 0xff;
853 /* Transfer length */
854 SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
855 SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
856 SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
857 SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
858 } else if (block > 0xffffffff) {
859 SCpnt->cmnd[0] += READ_16 - READ_6;
860 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
861 SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
862 SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
863 SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
864 SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
865 SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
866 SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
867 SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
868 SCpnt->cmnd[9] = (unsigned char) block & 0xff;
869 SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
870 SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
871 SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
872 SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
873 SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
874 } else if ((this_count > 0xff) || (block > 0x1fffff) ||
875 scsi_device_protection(SCpnt->device) ||
876 SCpnt->device->use_10_for_rw) {
877 if (this_count > 0xffff)
880 SCpnt->cmnd[0] += READ_10 - READ_6;
881 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
882 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
883 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
884 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
885 SCpnt->cmnd[5] = (unsigned char) block & 0xff;
886 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
887 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
888 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
890 if (unlikely(rq->cmd_flags & REQ_FUA)) {
892 * This happens only if this drive failed
893 * 10byte rw command with ILLEGAL_REQUEST
894 * during operation and thus turned off
897 scmd_printk(KERN_ERR, SCpnt,
898 "FUA write on READ/WRITE(6) drive\n");
902 SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
903 SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
904 SCpnt->cmnd[3] = (unsigned char) block & 0xff;
905 SCpnt->cmnd[4] = (unsigned char) this_count;
908 SCpnt->sdb.length = this_count * sdp->sector_size;
910 /* If DIF or DIX is enabled, tell HBA how to handle request */
911 if (host_dif || scsi_prot_sg_count(SCpnt))
912 sd_prot_op(SCpnt, host_dif);
915 * We shouldn't disconnect in the middle of a sector, so with a dumb
916 * host adapter, it's safe to assume that we can at least transfer
917 * this many bytes between each connect / disconnect.
919 SCpnt->transfersize = sdp->sector_size;
920 SCpnt->underflow = this_count << 9;
921 SCpnt->allowed = SD_MAX_RETRIES;
924 * This indicates that the command is ready from our end to be
929 return scsi_prep_return(q, rq, ret);
933 * sd_open - open a scsi disk device
934 * @inode: only i_rdev member may be used
935 * @filp: only f_mode and f_flags may be used
937 * Returns 0 if successful. Returns a negated errno value in case
940 * Note: This can be called from a user context (e.g. fsck(1) )
941 * or from within the kernel (e.g. as a result of a mount(1) ).
942 * In the latter case @inode and @filp carry an abridged amount
943 * of information as noted above.
945 * Locking: called with bdev->bd_mutex held.
947 static int sd_open(struct block_device *bdev, fmode_t mode)
949 struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
950 struct scsi_device *sdev;
956 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
960 retval = scsi_autopm_get_device(sdev);
965 * If the device is in error recovery, wait until it is done.
966 * If the device is offline, then disallow any access to it.
969 if (!scsi_block_when_processing_errors(sdev))
972 if (sdev->removable || sdkp->write_prot)
973 check_disk_change(bdev);
976 * If the drive is empty, just let the open fail.
979 if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
983 * If the device has the write protect tab set, have the open fail
984 * if the user expects to be able to write to the thing.
987 if (sdkp->write_prot && (mode & FMODE_WRITE))
991 * It is possible that the disk changing stuff resulted in
992 * the device being taken offline. If this is the case,
993 * report this to the user, and don't pretend that the
994 * open actually succeeded.
997 if (!scsi_device_online(sdev))
1000 if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
1001 if (scsi_block_when_processing_errors(sdev))
1002 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
1008 scsi_autopm_put_device(sdev);
1010 scsi_disk_put(sdkp);
1015 * sd_release - invoked when the (last) close(2) is called on this
1017 * @inode: only i_rdev member may be used
1018 * @filp: only f_mode and f_flags may be used
1022 * Note: may block (uninterruptible) if error recovery is underway
1025 * Locking: called with bdev->bd_mutex held.
1027 static int sd_release(struct gendisk *disk, fmode_t mode)
1029 struct scsi_disk *sdkp = scsi_disk(disk);
1030 struct scsi_device *sdev = sdkp->device;
1032 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1034 if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1035 if (scsi_block_when_processing_errors(sdev))
1036 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1040 * XXX and what if there are packets in flight and this close()
1041 * XXX is followed by a "rmmod sd_mod"?
1044 scsi_autopm_put_device(sdev);
1045 scsi_disk_put(sdkp);
1049 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1051 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1052 struct scsi_device *sdp = sdkp->device;
1053 struct Scsi_Host *host = sdp->host;
1056 /* default to most commonly used values */
1057 diskinfo[0] = 0x40; /* 1 << 6 */
1058 diskinfo[1] = 0x20; /* 1 << 5 */
1059 diskinfo[2] = sdkp->capacity >> 11;
1061 /* override with calculated, extended default, or driver values */
1062 if (host->hostt->bios_param)
1063 host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
1065 scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
1067 geo->heads = diskinfo[0];
1068 geo->sectors = diskinfo[1];
1069 geo->cylinders = diskinfo[2];
1074 * sd_ioctl - process an ioctl
1075 * @inode: only i_rdev/i_bdev members may be used
1076 * @filp: only f_mode and f_flags may be used
1077 * @cmd: ioctl command number
1078 * @arg: this is third argument given to ioctl(2) system call.
1079 * Often contains a pointer.
1081 * Returns 0 if successful (some ioctls return positive numbers on
1082 * success as well). Returns a negated errno value in case of error.
1084 * Note: most ioctls are forward onto the block subsystem or further
1085 * down in the scsi subsystem.
1087 static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1088 unsigned int cmd, unsigned long arg)
1090 struct gendisk *disk = bdev->bd_disk;
1091 struct scsi_disk *sdkp = scsi_disk(disk);
1092 struct scsi_device *sdp = sdkp->device;
1093 void __user *p = (void __user *)arg;
1096 SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
1097 "cmd=0x%x\n", disk->disk_name, cmd));
1099 error = scsi_verify_blk_ioctl(bdev, cmd);
1104 * If we are in the middle of error recovery, don't let anyone
1105 * else try and use this device. Also, if error recovery fails, it
1106 * may try and take the device offline, in which case all further
1107 * access to the device is prohibited.
1109 error = scsi_nonblockable_ioctl(sdp, cmd, p,
1110 (mode & FMODE_NDELAY) != 0);
1111 if (!scsi_block_when_processing_errors(sdp) || !error)
1115 * Send SCSI addressing ioctls directly to mid level, send other
1116 * ioctls to block level and then onto mid level if they can't be
1120 case SCSI_IOCTL_GET_IDLUN:
1121 case SCSI_IOCTL_GET_BUS_NUMBER:
1122 error = scsi_ioctl(sdp, cmd, p);
1125 error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p);
1126 if (error != -ENOTTY)
1128 error = scsi_ioctl(sdp, cmd, p);
1135 static void set_media_not_present(struct scsi_disk *sdkp)
1137 if (sdkp->media_present)
1138 sdkp->device->changed = 1;
1140 if (sdkp->device->removable) {
1141 sdkp->media_present = 0;
1146 static int media_not_present(struct scsi_disk *sdkp,
1147 struct scsi_sense_hdr *sshdr)
1149 if (!scsi_sense_valid(sshdr))
1152 /* not invoked for commands that could return deferred errors */
1153 switch (sshdr->sense_key) {
1154 case UNIT_ATTENTION:
1156 /* medium not present */
1157 if (sshdr->asc == 0x3A) {
1158 set_media_not_present(sdkp);
1166 * sd_check_events - check media events
1167 * @disk: kernel device descriptor
1168 * @clearing: disk events currently being cleared
1170 * Returns mask of DISK_EVENT_*.
1172 * Note: this function is invoked from the block subsystem.
1174 static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1176 struct scsi_disk *sdkp = scsi_disk(disk);
1177 struct scsi_device *sdp = sdkp->device;
1178 struct scsi_sense_hdr *sshdr = NULL;
1181 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1184 * If the device is offline, don't send any commands - just pretend as
1185 * if the command failed. If the device ever comes back online, we
1186 * can deal with it then. It is only because of unrecoverable errors
1187 * that we would ever take a device offline in the first place.
1189 if (!scsi_device_online(sdp)) {
1190 set_media_not_present(sdkp);
1195 * Using TEST_UNIT_READY enables differentiation between drive with
1196 * no cartridge loaded - NOT READY, drive with changed cartridge -
1197 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1199 * Drives that auto spin down. eg iomega jaz 1G, will be started
1200 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1201 * sd_revalidate() is called.
1205 if (scsi_block_when_processing_errors(sdp)) {
1206 sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
1207 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
1211 /* failed to execute TUR, assume media not present */
1212 if (host_byte(retval)) {
1213 set_media_not_present(sdkp);
1217 if (media_not_present(sdkp, sshdr))
1221 * For removable scsi disk we have to recognise the presence
1222 * of a disk in the drive.
1224 if (!sdkp->media_present)
1226 sdkp->media_present = 1;
1229 * sdp->changed is set under the following conditions:
1231 * Medium present state has changed in either direction.
1232 * Device has indicated UNIT_ATTENTION.
1235 retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1240 static int sd_sync_cache(struct scsi_disk *sdkp)
1243 struct scsi_device *sdp = sdkp->device;
1244 struct scsi_sense_hdr sshdr;
1246 if (!scsi_device_online(sdp))
1250 for (retries = 3; retries > 0; --retries) {
1251 unsigned char cmd[10] = { 0 };
1253 cmd[0] = SYNCHRONIZE_CACHE;
1255 * Leave the rest of the command zero to indicate
1258 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
1259 SD_FLUSH_TIMEOUT, SD_MAX_RETRIES, NULL);
1265 sd_print_result(sdkp, res);
1266 if (driver_byte(res) & DRIVER_SENSE)
1267 sd_print_sense_hdr(sdkp, &sshdr);
1275 static void sd_rescan(struct device *dev)
1277 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
1280 revalidate_disk(sdkp->disk);
1281 scsi_disk_put(sdkp);
1286 #ifdef CONFIG_COMPAT
1288 * This gets directly called from VFS. When the ioctl
1289 * is not recognized we go back to the other translation paths.
1291 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
1292 unsigned int cmd, unsigned long arg)
1294 struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1297 ret = scsi_verify_blk_ioctl(bdev, cmd);
1299 return -ENOIOCTLCMD;
1302 * If we are in the middle of error recovery, don't let anyone
1303 * else try and use this device. Also, if error recovery fails, it
1304 * may try and take the device offline, in which case all further
1305 * access to the device is prohibited.
1307 if (!scsi_block_when_processing_errors(sdev))
1310 if (sdev->host->hostt->compat_ioctl) {
1311 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
1317 * Let the static ioctl translation table take care of it.
1319 return -ENOIOCTLCMD;
1323 static const struct block_device_operations sd_fops = {
1324 .owner = THIS_MODULE,
1326 .release = sd_release,
1328 .getgeo = sd_getgeo,
1329 #ifdef CONFIG_COMPAT
1330 .compat_ioctl = sd_compat_ioctl,
1332 .check_events = sd_check_events,
1333 .revalidate_disk = sd_revalidate_disk,
1334 .unlock_native_capacity = sd_unlock_native_capacity,
1337 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1339 u64 start_lba = blk_rq_pos(scmd->request);
1340 u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
1344 * resid is optional but mostly filled in. When it's unused,
1345 * its value is zero, so we assume the whole buffer transferred
1347 unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1348 unsigned int good_bytes;
1350 if (scmd->request->cmd_type != REQ_TYPE_FS)
1353 info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
1354 SCSI_SENSE_BUFFERSIZE,
1359 if (scsi_bufflen(scmd) <= scmd->device->sector_size)
1362 if (scmd->device->sector_size < 512) {
1363 /* only legitimate sector_size here is 256 */
1367 /* be careful ... don't want any overflows */
1368 u64 factor = scmd->device->sector_size / 512;
1369 do_div(start_lba, factor);
1370 do_div(end_lba, factor);
1373 /* The bad lba was reported incorrectly, we have no idea where
1376 if (bad_lba < start_lba || bad_lba >= end_lba)
1379 /* This computation should always be done in terms of
1380 * the resolution of the device's medium.
1382 good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
1383 return min(good_bytes, transferred);
1387 * sd_done - bottom half handler: called when the lower level
1388 * driver has completed (successfully or otherwise) a scsi command.
1389 * @SCpnt: mid-level's per command structure.
1391 * Note: potentially run from within an ISR. Must not block.
1393 static int sd_done(struct scsi_cmnd *SCpnt)
1395 int result = SCpnt->result;
1396 unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1397 struct scsi_sense_hdr sshdr;
1398 struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
1399 int sense_valid = 0;
1400 int sense_deferred = 0;
1401 unsigned char op = SCpnt->cmnd[0];
1403 if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result)
1404 scsi_set_resid(SCpnt, 0);
1407 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
1409 sense_deferred = scsi_sense_is_deferred(&sshdr);
1411 #ifdef CONFIG_SCSI_LOGGING
1412 SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
1414 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
1415 "sd_done: sb[respc,sk,asc,"
1416 "ascq]=%x,%x,%x,%x\n",
1417 sshdr.response_code,
1418 sshdr.sense_key, sshdr.asc,
1422 if (driver_byte(result) != DRIVER_SENSE &&
1423 (!sense_valid || sense_deferred))
1426 switch (sshdr.sense_key) {
1427 case HARDWARE_ERROR:
1429 good_bytes = sd_completed_bytes(SCpnt);
1431 case RECOVERED_ERROR:
1432 good_bytes = scsi_bufflen(SCpnt);
1435 /* This indicates a false check condition, so ignore it. An
1436 * unknown amount of data was transferred so treat it as an
1439 scsi_print_sense("sd", SCpnt);
1441 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1443 case ABORTED_COMMAND:
1444 if (sshdr.asc == 0x10) /* DIF: Target detected corruption */
1445 good_bytes = sd_completed_bytes(SCpnt);
1447 case ILLEGAL_REQUEST:
1448 if (sshdr.asc == 0x10) /* DIX: Host detected corruption */
1449 good_bytes = sd_completed_bytes(SCpnt);
1450 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
1451 if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
1452 (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME))
1453 sd_config_discard(sdkp, SD_LBP_DISABLE);
1459 if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
1460 sd_dif_complete(SCpnt, good_bytes);
1466 * spinup disk - called only in sd_revalidate_disk()
1469 sd_spinup_disk(struct scsi_disk *sdkp)
1471 unsigned char cmd[10];
1472 unsigned long spintime_expire = 0;
1473 int retries, spintime;
1474 unsigned int the_result;
1475 struct scsi_sense_hdr sshdr;
1476 int sense_valid = 0;
1480 /* Spin up drives, as required. Only do this at boot time */
1481 /* Spinup needs to be done for module loads too. */
1486 cmd[0] = TEST_UNIT_READY;
1487 memset((void *) &cmd[1], 0, 9);
1489 the_result = scsi_execute_req(sdkp->device, cmd,
1492 SD_MAX_RETRIES, NULL);
1495 * If the drive has indicated to us that it
1496 * doesn't have any media in it, don't bother
1497 * with any more polling.
1499 if (media_not_present(sdkp, &sshdr))
1503 sense_valid = scsi_sense_valid(&sshdr);
1505 } while (retries < 3 &&
1506 (!scsi_status_is_good(the_result) ||
1507 ((driver_byte(the_result) & DRIVER_SENSE) &&
1508 sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
1510 if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
1511 /* no sense, TUR either succeeded or failed
1512 * with a status error */
1513 if(!spintime && !scsi_status_is_good(the_result)) {
1514 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1515 sd_print_result(sdkp, the_result);
1521 * The device does not want the automatic start to be issued.
1523 if (sdkp->device->no_start_on_add)
1526 if (sense_valid && sshdr.sense_key == NOT_READY) {
1527 if (sshdr.asc == 4 && sshdr.ascq == 3)
1528 break; /* manual intervention required */
1529 if (sshdr.asc == 4 && sshdr.ascq == 0xb)
1530 break; /* standby */
1531 if (sshdr.asc == 4 && sshdr.ascq == 0xc)
1532 break; /* unavailable */
1534 * Issue command to spin up drive when not ready
1537 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
1538 cmd[0] = START_STOP;
1539 cmd[1] = 1; /* Return immediately */
1540 memset((void *) &cmd[2], 0, 8);
1541 cmd[4] = 1; /* Start spin cycle */
1542 if (sdkp->device->start_stop_pwr_cond)
1544 scsi_execute_req(sdkp->device, cmd, DMA_NONE,
1546 SD_TIMEOUT, SD_MAX_RETRIES,
1548 spintime_expire = jiffies + 100 * HZ;
1551 /* Wait 1 second for next try */
1556 * Wait for USB flash devices with slow firmware.
1557 * Yes, this sense key/ASC combination shouldn't
1558 * occur here. It's characteristic of these devices.
1560 } else if (sense_valid &&
1561 sshdr.sense_key == UNIT_ATTENTION &&
1562 sshdr.asc == 0x28) {
1564 spintime_expire = jiffies + 5 * HZ;
1567 /* Wait 1 second for next try */
1570 /* we don't understand the sense code, so it's
1571 * probably pointless to loop */
1573 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1574 sd_print_sense_hdr(sdkp, &sshdr);
1579 } while (spintime && time_before_eq(jiffies, spintime_expire));
1582 if (scsi_status_is_good(the_result))
1585 printk("not responding...\n");
1591 * Determine whether disk supports Data Integrity Field.
1593 static void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
1595 struct scsi_device *sdp = sdkp->device;
1598 if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
1601 type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
1603 if (type == sdkp->protection_type || !sdkp->first_scan)
1606 sdkp->protection_type = type;
1608 if (type > SD_DIF_TYPE3_PROTECTION) {
1609 sd_printk(KERN_ERR, sdkp, "formatted with unsupported " \
1610 "protection type %u. Disabling disk!\n", type);
1615 if (scsi_host_dif_capable(sdp->host, type))
1616 sd_printk(KERN_NOTICE, sdkp,
1617 "Enabling DIF Type %u protection\n", type);
1619 sd_printk(KERN_NOTICE, sdkp,
1620 "Disabling DIF Type %u protection\n", type);
1623 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
1624 struct scsi_sense_hdr *sshdr, int sense_valid,
1627 sd_print_result(sdkp, the_result);
1628 if (driver_byte(the_result) & DRIVER_SENSE)
1629 sd_print_sense_hdr(sdkp, sshdr);
1631 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
1634 * Set dirty bit for removable devices if not ready -
1635 * sometimes drives will not report this properly.
1637 if (sdp->removable &&
1638 sense_valid && sshdr->sense_key == NOT_READY)
1639 set_media_not_present(sdkp);
1642 * We used to set media_present to 0 here to indicate no media
1643 * in the drive, but some drives fail read capacity even with
1644 * media present, so we can't do that.
1646 sdkp->capacity = 0; /* unknown mapped to zero - as usual */
1650 #if RC16_LEN > SD_BUF_SIZE
1651 #error RC16_LEN must not be more than SD_BUF_SIZE
1654 #define READ_CAPACITY_RETRIES_ON_RESET 10
1656 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
1657 unsigned char *buffer)
1659 unsigned char cmd[16];
1660 struct scsi_sense_hdr sshdr;
1661 int sense_valid = 0;
1663 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
1664 unsigned int alignment;
1665 unsigned long long lba;
1666 unsigned sector_size;
1668 if (sdp->no_read_capacity_16)
1673 cmd[0] = SERVICE_ACTION_IN;
1674 cmd[1] = SAI_READ_CAPACITY_16;
1676 memset(buffer, 0, RC16_LEN);
1678 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1679 buffer, RC16_LEN, &sshdr,
1680 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1682 if (media_not_present(sdkp, &sshdr))
1686 sense_valid = scsi_sense_valid(&sshdr);
1688 sshdr.sense_key == ILLEGAL_REQUEST &&
1689 (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
1691 /* Invalid Command Operation Code or
1692 * Invalid Field in CDB, just retry
1693 * silently with RC10 */
1696 sshdr.sense_key == UNIT_ATTENTION &&
1697 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
1698 /* Device reset might occur several times,
1699 * give it one more chance */
1700 if (--reset_retries > 0)
1705 } while (the_result && retries);
1708 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
1709 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
1713 sector_size = get_unaligned_be32(&buffer[8]);
1714 lba = get_unaligned_be64(&buffer[0]);
1716 sd_read_protection_type(sdkp, buffer);
1718 if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
1719 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
1720 "kernel compiled with support for large block "
1726 /* Logical blocks per physical block exponent */
1727 sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
1729 /* Lowest aligned logical block */
1730 alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
1731 blk_queue_alignment_offset(sdp->request_queue, alignment);
1732 if (alignment && sdkp->first_scan)
1733 sd_printk(KERN_NOTICE, sdkp,
1734 "physical block alignment offset: %u\n", alignment);
1736 if (buffer[14] & 0x80) { /* LBPME */
1739 if (buffer[14] & 0x40) /* LBPRZ */
1742 sd_config_discard(sdkp, SD_LBP_WS16);
1745 sdkp->capacity = lba + 1;
1749 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
1750 unsigned char *buffer)
1752 unsigned char cmd[16];
1753 struct scsi_sense_hdr sshdr;
1754 int sense_valid = 0;
1756 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
1758 unsigned sector_size;
1761 cmd[0] = READ_CAPACITY;
1762 memset(&cmd[1], 0, 9);
1763 memset(buffer, 0, 8);
1765 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1767 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1769 if (media_not_present(sdkp, &sshdr))
1773 sense_valid = scsi_sense_valid(&sshdr);
1775 sshdr.sense_key == UNIT_ATTENTION &&
1776 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
1777 /* Device reset might occur several times,
1778 * give it one more chance */
1779 if (--reset_retries > 0)
1784 } while (the_result && retries);
1787 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
1788 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
1792 sector_size = get_unaligned_be32(&buffer[4]);
1793 lba = get_unaligned_be32(&buffer[0]);
1795 if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
1796 /* Some buggy (usb cardreader) devices return an lba of
1797 0xffffffff when the want to report a size of 0 (with
1798 which they really mean no media is present) */
1800 sdkp->physical_block_size = sector_size;
1804 if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
1805 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
1806 "kernel compiled with support for large block "
1812 sdkp->capacity = lba + 1;
1813 sdkp->physical_block_size = sector_size;
1817 static int sd_try_rc16_first(struct scsi_device *sdp)
1819 if (sdp->host->max_cmd_len < 16)
1821 if (sdp->scsi_level > SCSI_SPC_2)
1823 if (scsi_device_protection(sdp))
1829 * read disk capacity
1832 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
1835 struct scsi_device *sdp = sdkp->device;
1836 sector_t old_capacity = sdkp->capacity;
1838 if (sd_try_rc16_first(sdp)) {
1839 sector_size = read_capacity_16(sdkp, sdp, buffer);
1840 if (sector_size == -EOVERFLOW)
1842 if (sector_size == -ENODEV)
1844 if (sector_size < 0)
1845 sector_size = read_capacity_10(sdkp, sdp, buffer);
1846 if (sector_size < 0)
1849 sector_size = read_capacity_10(sdkp, sdp, buffer);
1850 if (sector_size == -EOVERFLOW)
1852 if (sector_size < 0)
1854 if ((sizeof(sdkp->capacity) > 4) &&
1855 (sdkp->capacity > 0xffffffffULL)) {
1856 int old_sector_size = sector_size;
1857 sd_printk(KERN_NOTICE, sdkp, "Very big device. "
1858 "Trying to use READ CAPACITY(16).\n");
1859 sector_size = read_capacity_16(sdkp, sdp, buffer);
1860 if (sector_size < 0) {
1861 sd_printk(KERN_NOTICE, sdkp,
1862 "Using 0xffffffff as device size\n");
1863 sdkp->capacity = 1 + (sector_t) 0xffffffff;
1864 sector_size = old_sector_size;
1870 /* Some devices are known to return the total number of blocks,
1871 * not the highest block number. Some devices have versions
1872 * which do this and others which do not. Some devices we might
1873 * suspect of doing this but we don't know for certain.
1875 * If we know the reported capacity is wrong, decrement it. If
1876 * we can only guess, then assume the number of blocks is even
1877 * (usually true but not always) and err on the side of lowering
1880 if (sdp->fix_capacity ||
1881 (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
1882 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
1883 "from its reported value: %llu\n",
1884 (unsigned long long) sdkp->capacity);
1889 if (sector_size == 0) {
1891 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
1895 if (sector_size != 512 &&
1896 sector_size != 1024 &&
1897 sector_size != 2048 &&
1898 sector_size != 4096 &&
1899 sector_size != 256) {
1900 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
1903 * The user might want to re-format the drive with
1904 * a supported sectorsize. Once this happens, it
1905 * would be relatively trivial to set the thing up.
1906 * For this reason, we leave the thing in the table.
1910 * set a bogus sector size so the normal read/write
1911 * logic in the block layer will eventually refuse any
1912 * request on this device without tripping over power
1913 * of two sector size assumptions
1917 blk_queue_logical_block_size(sdp->request_queue, sector_size);
1920 char cap_str_2[10], cap_str_10[10];
1921 u64 sz = (u64)sdkp->capacity << ilog2(sector_size);
1923 string_get_size(sz, STRING_UNITS_2, cap_str_2,
1925 string_get_size(sz, STRING_UNITS_10, cap_str_10,
1926 sizeof(cap_str_10));
1928 if (sdkp->first_scan || old_capacity != sdkp->capacity) {
1929 sd_printk(KERN_NOTICE, sdkp,
1930 "%llu %d-byte logical blocks: (%s/%s)\n",
1931 (unsigned long long)sdkp->capacity,
1932 sector_size, cap_str_10, cap_str_2);
1934 if (sdkp->physical_block_size != sector_size)
1935 sd_printk(KERN_NOTICE, sdkp,
1936 "%u-byte physical blocks\n",
1937 sdkp->physical_block_size);
1941 /* Rescale capacity to 512-byte units */
1942 if (sector_size == 4096)
1943 sdkp->capacity <<= 3;
1944 else if (sector_size == 2048)
1945 sdkp->capacity <<= 2;
1946 else if (sector_size == 1024)
1947 sdkp->capacity <<= 1;
1948 else if (sector_size == 256)
1949 sdkp->capacity >>= 1;
1951 blk_queue_physical_block_size(sdp->request_queue,
1952 sdkp->physical_block_size);
1953 sdkp->device->sector_size = sector_size;
1956 /* called with buffer of length 512 */
1958 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
1959 unsigned char *buffer, int len, struct scsi_mode_data *data,
1960 struct scsi_sense_hdr *sshdr)
1962 return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
1963 SD_TIMEOUT, SD_MAX_RETRIES, data,
1968 * read write protect setting, if possible - called only in sd_revalidate_disk()
1969 * called with buffer of length SD_BUF_SIZE
1972 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
1975 struct scsi_device *sdp = sdkp->device;
1976 struct scsi_mode_data data;
1977 int old_wp = sdkp->write_prot;
1979 set_disk_ro(sdkp->disk, 0);
1980 if (sdp->skip_ms_page_3f) {
1981 sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
1985 if (sdp->use_192_bytes_for_3f) {
1986 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
1989 * First attempt: ask for all pages (0x3F), but only 4 bytes.
1990 * We have to start carefully: some devices hang if we ask
1991 * for more than is available.
1993 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
1996 * Second attempt: ask for page 0 When only page 0 is
1997 * implemented, a request for page 3F may return Sense Key
1998 * 5: Illegal Request, Sense Code 24: Invalid field in
2001 if (!scsi_status_is_good(res))
2002 res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
2005 * Third attempt: ask 255 bytes, as we did earlier.
2007 if (!scsi_status_is_good(res))
2008 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
2012 if (!scsi_status_is_good(res)) {
2013 sd_printk(KERN_WARNING, sdkp,
2014 "Test WP failed, assume Write Enabled\n");
2016 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2017 set_disk_ro(sdkp->disk, sdkp->write_prot);
2018 if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2019 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2020 sdkp->write_prot ? "on" : "off");
2021 sd_printk(KERN_DEBUG, sdkp,
2022 "Mode Sense: %02x %02x %02x %02x\n",
2023 buffer[0], buffer[1], buffer[2], buffer[3]);
2029 * sd_read_cache_type - called only from sd_revalidate_disk()
2030 * called with buffer of length SD_BUF_SIZE
2033 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2036 struct scsi_device *sdp = sdkp->device;
2041 struct scsi_mode_data data;
2042 struct scsi_sense_hdr sshdr;
2043 int old_wce = sdkp->WCE;
2044 int old_rcd = sdkp->RCD;
2045 int old_dpofua = sdkp->DPOFUA;
2048 if (sdkp->cache_override)
2052 if (sdp->skip_ms_page_8) {
2053 if (sdp->type == TYPE_RBC)
2056 if (sdp->skip_ms_page_3f)
2059 if (sdp->use_192_bytes_for_3f)
2063 } else if (sdp->type == TYPE_RBC) {
2071 /* cautiously ask */
2072 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
2075 if (!scsi_status_is_good(res))
2078 if (!data.header_length) {
2081 sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n");
2084 /* that went OK, now ask for the proper length */
2088 * We're only interested in the first three bytes, actually.
2089 * But the data cache page is defined for the first 20.
2093 else if (len > SD_BUF_SIZE) {
2094 sd_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2095 "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2098 if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2102 if (len > first_len)
2103 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
2106 if (scsi_status_is_good(res)) {
2107 int offset = data.header_length + data.block_descriptor_length;
2109 while (offset < len) {
2110 u8 page_code = buffer[offset] & 0x3F;
2111 u8 spf = buffer[offset] & 0x40;
2113 if (page_code == 8 || page_code == 6) {
2114 /* We're interested only in the first 3 bytes.
2116 if (len - offset <= 2) {
2117 sd_printk(KERN_ERR, sdkp, "Incomplete "
2118 "mode parameter data\n");
2121 modepage = page_code;
2125 /* Go to the next page */
2126 if (spf && len - offset > 3)
2127 offset += 4 + (buffer[offset+2] << 8) +
2129 else if (!spf && len - offset > 1)
2130 offset += 2 + buffer[offset+1];
2132 sd_printk(KERN_ERR, sdkp, "Incomplete "
2133 "mode parameter data\n");
2139 sd_printk(KERN_ERR, sdkp, "No Caching mode page found\n");
2143 if (modepage == 8) {
2144 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2145 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2147 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2151 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2152 if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
2153 sd_printk(KERN_NOTICE, sdkp,
2154 "Uses READ/WRITE(6), disabling FUA\n");
2158 if (sdkp->first_scan || old_wce != sdkp->WCE ||
2159 old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2160 sd_printk(KERN_NOTICE, sdkp,
2161 "Write cache: %s, read cache: %s, %s\n",
2162 sdkp->WCE ? "enabled" : "disabled",
2163 sdkp->RCD ? "disabled" : "enabled",
2164 sdkp->DPOFUA ? "supports DPO and FUA"
2165 : "doesn't support DPO or FUA");
2171 if (scsi_sense_valid(&sshdr) &&
2172 sshdr.sense_key == ILLEGAL_REQUEST &&
2173 sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2174 /* Invalid field in CDB */
2175 sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2177 sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n");
2180 sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n");
2187 * The ATO bit indicates whether the DIF application tag is available
2188 * for use by the operating system.
2190 static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2193 struct scsi_device *sdp = sdkp->device;
2194 struct scsi_mode_data data;
2195 struct scsi_sense_hdr sshdr;
2197 if (sdp->type != TYPE_DISK)
2200 if (sdkp->protection_type == 0)
2203 res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2204 SD_MAX_RETRIES, &data, &sshdr);
2206 if (!scsi_status_is_good(res) || !data.header_length ||
2208 sd_printk(KERN_WARNING, sdkp,
2209 "getting Control mode page failed, assume no ATO\n");
2211 if (scsi_sense_valid(&sshdr))
2212 sd_print_sense_hdr(sdkp, &sshdr);
2217 offset = data.header_length + data.block_descriptor_length;
2219 if ((buffer[offset] & 0x3f) != 0x0a) {
2220 sd_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2224 if ((buffer[offset + 5] & 0x80) == 0)
2233 * sd_read_block_limits - Query disk device for preferred I/O sizes.
2234 * @disk: disk to query
2236 static void sd_read_block_limits(struct scsi_disk *sdkp)
2238 unsigned int sector_sz = sdkp->device->sector_size;
2239 const int vpd_len = 64;
2240 unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
2243 /* Block Limits VPD */
2244 scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
2247 blk_queue_io_min(sdkp->disk->queue,
2248 get_unaligned_be16(&buffer[6]) * sector_sz);
2249 blk_queue_io_opt(sdkp->disk->queue,
2250 get_unaligned_be32(&buffer[12]) * sector_sz);
2252 if (buffer[3] == 0x3c) {
2253 unsigned int lba_count, desc_count;
2255 sdkp->max_ws_blocks =
2256 (u32) min_not_zero(get_unaligned_be64(&buffer[36]),
2262 lba_count = get_unaligned_be32(&buffer[20]);
2263 desc_count = get_unaligned_be32(&buffer[24]);
2265 if (lba_count && desc_count)
2266 sdkp->max_unmap_blocks = lba_count;
2268 sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
2270 if (buffer[32] & 0x80)
2271 sdkp->unmap_alignment =
2272 get_unaligned_be32(&buffer[32]) & ~(1 << 31);
2274 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2276 if (sdkp->max_unmap_blocks)
2277 sd_config_discard(sdkp, SD_LBP_UNMAP);
2279 sd_config_discard(sdkp, SD_LBP_WS16);
2281 } else { /* LBP VPD page tells us what to use */
2283 if (sdkp->lbpu && sdkp->max_unmap_blocks)
2284 sd_config_discard(sdkp, SD_LBP_UNMAP);
2285 else if (sdkp->lbpws)
2286 sd_config_discard(sdkp, SD_LBP_WS16);
2287 else if (sdkp->lbpws10)
2288 sd_config_discard(sdkp, SD_LBP_WS10);
2290 sd_config_discard(sdkp, SD_LBP_DISABLE);
2299 * sd_read_block_characteristics - Query block dev. characteristics
2300 * @disk: disk to query
2302 static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2304 unsigned char *buffer;
2306 const int vpd_len = 64;
2308 buffer = kmalloc(vpd_len, GFP_KERNEL);
2311 /* Block Device Characteristics VPD */
2312 scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
2315 rot = get_unaligned_be16(&buffer[4]);
2318 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
2325 * sd_read_block_provisioning - Query provisioning VPD page
2326 * @disk: disk to query
2328 static void sd_read_block_provisioning(struct scsi_disk *sdkp)
2330 unsigned char *buffer;
2331 const int vpd_len = 8;
2333 if (sdkp->lbpme == 0)
2336 buffer = kmalloc(vpd_len, GFP_KERNEL);
2338 if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
2342 sdkp->lbpu = (buffer[5] >> 7) & 1; /* UNMAP */
2343 sdkp->lbpws = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */
2344 sdkp->lbpws10 = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */
2350 static int sd_try_extended_inquiry(struct scsi_device *sdp)
2353 * Although VPD inquiries can go to SCSI-2 type devices,
2354 * some USB ones crash on receiving them, and the pages
2355 * we currently ask for are for SPC-3 and beyond
2357 if (sdp->scsi_level > SCSI_SPC_2)
2363 * sd_revalidate_disk - called the first time a new disk is seen,
2364 * performs disk spin up, read_capacity, etc.
2365 * @disk: struct gendisk we care about
2367 static int sd_revalidate_disk(struct gendisk *disk)
2369 struct scsi_disk *sdkp = scsi_disk(disk);
2370 struct scsi_device *sdp = sdkp->device;
2371 unsigned char *buffer;
2374 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
2375 "sd_revalidate_disk\n"));
2378 * If the device is offline, don't try and read capacity or any
2379 * of the other niceties.
2381 if (!scsi_device_online(sdp))
2384 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
2386 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
2387 "allocation failure.\n");
2391 sd_spinup_disk(sdkp);
2394 * Without media there is no reason to ask; moreover, some devices
2395 * react badly if we do.
2397 if (sdkp->media_present) {
2398 sd_read_capacity(sdkp, buffer);
2400 if (sd_try_extended_inquiry(sdp)) {
2401 sd_read_block_provisioning(sdkp);
2402 sd_read_block_limits(sdkp);
2403 sd_read_block_characteristics(sdkp);
2406 sd_read_write_protect_flag(sdkp, buffer);
2407 sd_read_cache_type(sdkp, buffer);
2408 sd_read_app_tag_own(sdkp, buffer);
2411 sdkp->first_scan = 0;
2414 * We now have all cache related info, determine how we deal
2415 * with flush requests.
2423 blk_queue_flush(sdkp->disk->queue, flush);
2425 set_capacity(disk, sdkp->capacity);
2433 * sd_unlock_native_capacity - unlock native capacity
2434 * @disk: struct gendisk to set capacity for
2436 * Block layer calls this function if it detects that partitions
2437 * on @disk reach beyond the end of the device. If the SCSI host
2438 * implements ->unlock_native_capacity() method, it's invoked to
2439 * give it a chance to adjust the device capacity.
2442 * Defined by block layer. Might sleep.
2444 static void sd_unlock_native_capacity(struct gendisk *disk)
2446 struct scsi_device *sdev = scsi_disk(disk)->device;
2448 if (sdev->host->hostt->unlock_native_capacity)
2449 sdev->host->hostt->unlock_native_capacity(sdev);
2453 * sd_format_disk_name - format disk name
2454 * @prefix: name prefix - ie. "sd" for SCSI disks
2455 * @index: index of the disk to format name for
2456 * @buf: output buffer
2457 * @buflen: length of the output buffer
2459 * SCSI disk names starts at sda. The 26th device is sdz and the
2460 * 27th is sdaa. The last one for two lettered suffix is sdzz
2461 * which is followed by sdaaa.
2463 * This is basically 26 base counting with one extra 'nil' entry
2464 * at the beginning from the second digit on and can be
2465 * determined using similar method as 26 base conversion with the
2466 * index shifted -1 after each digit is computed.
2472 * 0 on success, -errno on failure.
2474 static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
2476 const int base = 'z' - 'a' + 1;
2477 char *begin = buf + strlen(prefix);
2478 char *end = buf + buflen;
2488 *--p = 'a' + (index % unit);
2489 index = (index / unit) - 1;
2490 } while (index >= 0);
2492 memmove(begin, p, end - p);
2493 memcpy(buf, prefix, strlen(prefix));
2499 * The asynchronous part of sd_probe
2501 static void sd_probe_async(void *data, async_cookie_t cookie)
2503 struct scsi_disk *sdkp = data;
2504 struct scsi_device *sdp;
2511 index = sdkp->index;
2512 dev = &sdp->sdev_gendev;
2514 gd->major = sd_major((index & 0xf0) >> 4);
2515 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
2516 gd->minors = SD_MINORS;
2518 gd->fops = &sd_fops;
2519 gd->private_data = &sdkp->driver;
2520 gd->queue = sdkp->device->request_queue;
2522 /* defaults, until the device tells us otherwise */
2523 sdp->sector_size = 512;
2525 sdkp->media_present = 1;
2526 sdkp->write_prot = 0;
2527 sdkp->cache_override = 0;
2531 sdkp->first_scan = 1;
2533 sd_revalidate_disk(gd);
2535 blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
2536 blk_queue_unprep_rq(sdp->request_queue, sd_unprep_fn);
2538 gd->driverfs_dev = &sdp->sdev_gendev;
2539 gd->flags = GENHD_FL_EXT_DEVT;
2540 if (sdp->removable) {
2541 gd->flags |= GENHD_FL_REMOVABLE;
2542 gd->events |= DISK_EVENT_MEDIA_CHANGE;
2546 sd_dif_config_host(sdkp);
2548 sd_revalidate_disk(gd);
2550 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
2551 sdp->removable ? "removable " : "");
2552 scsi_autopm_put_device(sdp);
2553 put_device(&sdkp->dev);
2557 * sd_probe - called during driver initialization and whenever a
2558 * new scsi device is attached to the system. It is called once
2559 * for each scsi device (not just disks) present.
2560 * @dev: pointer to device object
2562 * Returns 0 if successful (or not interested in this scsi device
2563 * (e.g. scanner)); 1 when there is an error.
2565 * Note: this function is invoked from the scsi mid-level.
2566 * This function sets up the mapping between a given
2567 * <host,channel,id,lun> (found in sdp) and new device name
2568 * (e.g. /dev/sda). More precisely it is the block device major
2569 * and minor number that is chosen here.
2571 * Assume sd_attach is not re-entrant (for time being)
2572 * Also think about sd_attach() and sd_remove() running coincidentally.
2574 static int sd_probe(struct device *dev)
2576 struct scsi_device *sdp = to_scsi_device(dev);
2577 struct scsi_disk *sdkp;
2583 if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
2586 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
2590 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
2594 gd = alloc_disk(SD_MINORS);
2599 if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
2602 spin_lock(&sd_index_lock);
2603 error = ida_get_new(&sd_index_ida, &index);
2604 spin_unlock(&sd_index_lock);
2605 } while (error == -EAGAIN);
2608 sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
2612 error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
2614 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
2615 goto out_free_index;
2619 sdkp->driver = &sd_template;
2621 sdkp->index = index;
2622 atomic_set(&sdkp->openers, 0);
2624 if (!sdp->request_queue->rq_timeout) {
2625 if (sdp->type != TYPE_MOD)
2626 blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
2628 blk_queue_rq_timeout(sdp->request_queue,
2632 device_initialize(&sdkp->dev);
2633 sdkp->dev.parent = dev;
2634 sdkp->dev.class = &sd_disk_class;
2635 dev_set_name(&sdkp->dev, dev_name(dev));
2637 if (device_add(&sdkp->dev))
2638 goto out_free_index;
2641 dev_set_drvdata(dev, sdkp);
2643 get_device(&sdkp->dev); /* prevent release before async_schedule */
2644 async_schedule(sd_probe_async, sdkp);
2649 spin_lock(&sd_index_lock);
2650 ida_remove(&sd_index_ida, index);
2651 spin_unlock(&sd_index_lock);
2661 * sd_remove - called whenever a scsi disk (previously recognized by
2662 * sd_probe) is detached from the system. It is called (potentially
2663 * multiple times) during sd module unload.
2664 * @sdp: pointer to mid level scsi device object
2666 * Note: this function is invoked from the scsi mid-level.
2667 * This function potentially frees up a device name (e.g. /dev/sdc)
2668 * that could be re-used by a subsequent sd_probe().
2669 * This function is not called when the built-in sd driver is "exit-ed".
2671 static int sd_remove(struct device *dev)
2673 struct scsi_disk *sdkp;
2675 sdkp = dev_get_drvdata(dev);
2676 scsi_autopm_get_device(sdkp->device);
2678 async_synchronize_full();
2679 blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
2680 blk_queue_unprep_rq(sdkp->device->request_queue, NULL);
2681 device_del(&sdkp->dev);
2682 del_gendisk(sdkp->disk);
2685 mutex_lock(&sd_ref_mutex);
2686 dev_set_drvdata(dev, NULL);
2687 put_device(&sdkp->dev);
2688 mutex_unlock(&sd_ref_mutex);
2694 * scsi_disk_release - Called to free the scsi_disk structure
2695 * @dev: pointer to embedded class device
2697 * sd_ref_mutex must be held entering this routine. Because it is
2698 * called on last put, you should always use the scsi_disk_get()
2699 * scsi_disk_put() helpers which manipulate the semaphore directly
2700 * and never do a direct put_device.
2702 static void scsi_disk_release(struct device *dev)
2704 struct scsi_disk *sdkp = to_scsi_disk(dev);
2705 struct gendisk *disk = sdkp->disk;
2707 spin_lock(&sd_index_lock);
2708 ida_remove(&sd_index_ida, sdkp->index);
2709 spin_unlock(&sd_index_lock);
2711 disk->private_data = NULL;
2713 put_device(&sdkp->device->sdev_gendev);
2718 static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
2720 unsigned char cmd[6] = { START_STOP }; /* START_VALID */
2721 struct scsi_sense_hdr sshdr;
2722 struct scsi_device *sdp = sdkp->device;
2726 cmd[4] |= 1; /* START */
2728 if (sdp->start_stop_pwr_cond)
2729 cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */
2731 if (!scsi_device_online(sdp))
2734 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
2735 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2737 sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
2738 sd_print_result(sdkp, res);
2739 if (driver_byte(res) & DRIVER_SENSE)
2740 sd_print_sense_hdr(sdkp, &sshdr);
2747 * Send a SYNCHRONIZE CACHE instruction down to the device through
2748 * the normal SCSI command structure. Wait for the command to
2751 static void sd_shutdown(struct device *dev)
2753 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2756 return; /* this can happen */
2759 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
2760 sd_sync_cache(sdkp);
2763 if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
2764 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
2765 sd_start_stop_device(sdkp, 0);
2768 scsi_disk_put(sdkp);
2771 static int sd_suspend(struct device *dev, pm_message_t mesg)
2773 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2777 return 0; /* this can happen */
2780 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
2781 ret = sd_sync_cache(sdkp);
2786 if ((mesg.event & PM_EVENT_SLEEP) && sdkp->device->manage_start_stop) {
2787 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
2788 ret = sd_start_stop_device(sdkp, 0);
2792 scsi_disk_put(sdkp);
2796 static int sd_resume(struct device *dev)
2798 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2801 if (!sdkp->device->manage_start_stop)
2804 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
2805 ret = sd_start_stop_device(sdkp, 1);
2808 scsi_disk_put(sdkp);
2813 * init_sd - entry point for this driver (both when built in or when
2816 * Note: this function registers this driver with the scsi mid-level.
2818 static int __init init_sd(void)
2820 int majors = 0, i, err;
2822 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
2824 for (i = 0; i < SD_MAJORS; i++)
2825 if (register_blkdev(sd_major(i), "sd") == 0)
2831 err = class_register(&sd_disk_class);
2835 sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
2837 if (!sd_cdb_cache) {
2838 printk(KERN_ERR "sd: can't init extended cdb cache\n");
2842 sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
2844 printk(KERN_ERR "sd: can't init extended cdb pool\n");
2848 err = scsi_register_driver(&sd_template.gendrv);
2850 goto err_out_driver;
2855 mempool_destroy(sd_cdb_pool);
2858 kmem_cache_destroy(sd_cdb_cache);
2861 class_unregister(&sd_disk_class);
2863 for (i = 0; i < SD_MAJORS; i++)
2864 unregister_blkdev(sd_major(i), "sd");
2869 * exit_sd - exit point for this driver (when it is a module).
2871 * Note: this function unregisters this driver from the scsi mid-level.
2873 static void __exit exit_sd(void)
2877 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
2879 scsi_unregister_driver(&sd_template.gendrv);
2880 mempool_destroy(sd_cdb_pool);
2881 kmem_cache_destroy(sd_cdb_cache);
2883 class_unregister(&sd_disk_class);
2885 for (i = 0; i < SD_MAJORS; i++)
2886 unregister_blkdev(sd_major(i), "sd");
2889 module_init(init_sd);
2890 module_exit(exit_sd);
2892 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
2893 struct scsi_sense_hdr *sshdr)
2895 sd_printk(KERN_INFO, sdkp, " ");
2896 scsi_show_sense_hdr(sshdr);
2897 sd_printk(KERN_INFO, sdkp, " ");
2898 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
2901 static void sd_print_result(struct scsi_disk *sdkp, int result)
2903 sd_printk(KERN_INFO, sdkp, " ");
2904 scsi_show_result(result);