1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Enterprise Fibre Channel Host Bus Adapters. *
4 * Refer to the README file included with this package for *
5 * driver version and adapter support. *
6 * Copyright (C) 2004 Emulex Corporation. *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of the GNU General Public License *
11 * as published by the Free Software Foundation; either version 2 *
12 * of the License, or (at your option) any later version. *
14 * This program is distributed in the hope that it will be useful, *
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
17 * GNU General Public License for more details, a copy of which *
18 * can be found in the file COPYING included with this package. *
19 *******************************************************************/
22 * $Id: lpfc_sli.c 1.232 2005/04/13 11:59:16EDT sf_support Exp $
25 #include <linux/blkdev.h>
26 #include <linux/pci.h>
27 #include <linux/interrupt.h>
28 #include <linux/delay.h>
30 #include <scsi/scsi_cmnd.h>
31 #include <scsi/scsi_device.h>
32 #include <scsi/scsi_host.h>
36 #include "lpfc_disc.h"
37 #include "lpfc_scsi.h"
39 #include "lpfc_crtn.h"
40 #include "lpfc_logmsg.h"
41 #include "lpfc_compat.h"
44 * Define macro to log: Mailbox command x%x cannot issue Data
45 * This allows multiple uses of lpfc_msgBlk0311
46 * w/o perturbing log msg utility.
48 #define LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag) \
49 lpfc_printf_log(phba, \
52 "%d:0311 Mailbox command x%x cannot issue " \
53 "Data: x%x x%x x%x\n", \
61 /* There are only four IOCB completion types. */
62 typedef enum _lpfc_iocb_type {
70 * Translate the iocb command to an iocb command type used to decide the final
71 * disposition of each completed IOCB.
74 lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
76 lpfc_iocb_type type = LPFC_UNKNOWN_IOCB;
78 if (iocb_cmnd > CMD_MAX_IOCB_CMD)
82 case CMD_XMIT_SEQUENCE_CR:
83 case CMD_XMIT_SEQUENCE_CX:
84 case CMD_XMIT_BCAST_CN:
85 case CMD_XMIT_BCAST_CX:
86 case CMD_ELS_REQUEST_CR:
87 case CMD_ELS_REQUEST_CX:
88 case CMD_CREATE_XRI_CR:
89 case CMD_CREATE_XRI_CX:
91 case CMD_XMIT_ELS_RSP_CX:
93 case CMD_FCP_IWRITE_CR:
94 case CMD_FCP_IWRITE_CX:
95 case CMD_FCP_IREAD_CR:
96 case CMD_FCP_IREAD_CX:
97 case CMD_FCP_ICMND_CR:
98 case CMD_FCP_ICMND_CX:
100 case CMD_ADAPTER_DUMP:
101 case CMD_XMIT_SEQUENCE64_CR:
102 case CMD_XMIT_SEQUENCE64_CX:
103 case CMD_XMIT_BCAST64_CN:
104 case CMD_XMIT_BCAST64_CX:
105 case CMD_ELS_REQUEST64_CR:
106 case CMD_ELS_REQUEST64_CX:
107 case CMD_FCP_IWRITE64_CR:
108 case CMD_FCP_IWRITE64_CX:
109 case CMD_FCP_IREAD64_CR:
110 case CMD_FCP_IREAD64_CX:
111 case CMD_FCP_ICMND64_CR:
112 case CMD_FCP_ICMND64_CX:
113 case CMD_GEN_REQUEST64_CR:
114 case CMD_GEN_REQUEST64_CX:
115 case CMD_XMIT_ELS_RSP64_CX:
116 type = LPFC_SOL_IOCB;
118 case CMD_ABORT_XRI_CN:
119 case CMD_ABORT_XRI_CX:
120 case CMD_CLOSE_XRI_CN:
121 case CMD_CLOSE_XRI_CX:
122 case CMD_XRI_ABORTED_CX:
123 case CMD_ABORT_MXRI64_CN:
124 type = LPFC_ABORT_IOCB;
126 case CMD_RCV_SEQUENCE_CX:
127 case CMD_RCV_ELS_REQ_CX:
128 case CMD_RCV_SEQUENCE64_CX:
129 case CMD_RCV_ELS_REQ64_CX:
130 type = LPFC_UNSOL_IOCB;
133 type = LPFC_UNKNOWN_IOCB;
141 lpfc_sli_ring_map(struct lpfc_hba * phba, LPFC_MBOXQ_t *pmb)
143 struct lpfc_sli *psli = &phba->sli;
144 MAILBOX_t *pmbox = &pmb->mb;
147 for (i = 0; i < psli->num_rings; i++) {
148 phba->hba_state = LPFC_INIT_MBX_CMDS;
149 lpfc_config_ring(phba, i, pmb);
150 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
151 if (rc != MBX_SUCCESS) {
152 lpfc_printf_log(phba,
155 "%d:0446 Adapter failed to init, "
156 "mbxCmd x%x CFG_RING, mbxStatus x%x, "
162 phba->hba_state = LPFC_HBA_ERROR;
170 lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba,
171 struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb)
175 list_add_tail(&piocb->list, &pring->txcmplq);
176 pring->txcmplq_cnt++;
177 if (unlikely(pring->ringno == LPFC_ELS_RING))
178 mod_timer(&phba->els_tmofunc,
179 jiffies + HZ * (phba->fc_ratov << 1));
181 if (pring->fast_lookup) {
182 /* Setup fast lookup based on iotag for completion */
183 iotag = piocb->iocb.ulpIoTag;
184 if (iotag && (iotag < pring->fast_iotag))
185 *(pring->fast_lookup + iotag) = piocb;
188 /* Cmd ring <ringno> put: iotag <iotag> greater then
189 configured max <fast_iotag> wd0 <icmd> */
190 lpfc_printf_log(phba,
193 "%d:0316 Cmd ring %d put: iotag x%x "
194 "greater then configured max x%x "
197 pring->ringno, iotag,
199 *(((uint32_t *)(&piocb->iocb)) + 7));
205 static struct lpfc_iocbq *
206 lpfc_sli_ringtx_get(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
208 struct list_head *dlp;
209 struct lpfc_iocbq *cmd_iocb;
213 list_remove_head((&pring->txq), cmd_iocb,
217 /* If the first ptr is not equal to the list header,
218 * deque the IOCBQ_t and return it.
226 lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
228 MAILBOX_t *mbox = (MAILBOX_t *)phba->sli.MBhostaddr;
229 PGP *pgp = (PGP *)&mbox->us.s2.port[pring->ringno];
230 uint32_t max_cmd_idx = pring->numCiocb;
233 if ((pring->next_cmdidx == pring->cmdidx) &&
234 (++pring->next_cmdidx >= max_cmd_idx))
235 pring->next_cmdidx = 0;
237 if (unlikely(pring->local_getidx == pring->next_cmdidx)) {
239 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
241 if (unlikely(pring->local_getidx >= max_cmd_idx)) {
242 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
243 "%d:0315 Ring %d issue: portCmdGet %d "
244 "is bigger then cmd ring %d\n",
245 phba->brd_no, pring->ringno,
246 pring->local_getidx, max_cmd_idx);
248 phba->hba_state = LPFC_HBA_ERROR;
250 * All error attention handlers are posted to
253 phba->work_ha |= HA_ERATT;
254 phba->work_hs = HS_FFER3;
256 wake_up(phba->work_wait);
261 if (pring->local_getidx == pring->next_cmdidx)
265 iocb = IOCB_ENTRY(pring->cmdringaddr, pring->cmdidx);
271 lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
273 uint32_t search_start;
275 if (pring->fast_lookup == NULL) {
277 if (pring->iotag_ctr >= pring->iotag_max)
278 pring->iotag_ctr = 1;
279 return pring->iotag_ctr;
282 search_start = pring->iotag_ctr;
286 if (pring->iotag_ctr >= pring->fast_iotag)
287 pring->iotag_ctr = 1;
289 if (*(pring->fast_lookup + pring->iotag_ctr) == NULL)
290 return pring->iotag_ctr;
292 } while (pring->iotag_ctr != search_start);
295 * Outstanding I/O count for ring <ringno> is at max <fast_iotag>
297 lpfc_printf_log(phba,
300 "%d:0318 Outstanding I/O count for ring %d is at max x%x\n",
308 lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
309 IOCB_t *iocb, struct lpfc_iocbq *nextiocb)
312 * Allocate and set up an iotag
314 nextiocb->iocb.ulpIoTag =
315 lpfc_sli_next_iotag(phba, &phba->sli.ring[phba->sli.fcp_ring]);
318 * Issue iocb command to adapter
320 lpfc_sli_pcimem_bcopy(&nextiocb->iocb, iocb, sizeof (IOCB_t));
322 pring->stats.iocb_cmd++;
325 * If there is no completion routine to call, we can release the
326 * IOCB buffer back right now. For IOCBs, like QUE_RING_BUF,
327 * that have no rsp ring completion, iocb_cmpl MUST be NULL.
329 if (nextiocb->iocb_cmpl)
330 lpfc_sli_ringtxcmpl_put(phba, pring, nextiocb);
332 list_add_tail(&nextiocb->list, &phba->lpfc_iocb_list);
336 * Let the HBA know what IOCB slot will be the next one the
337 * driver will put a command into.
339 pring->cmdidx = pring->next_cmdidx;
340 writeb(pring->cmdidx, phba->MBslimaddr
341 + (SLIMOFF + (pring->ringno * 2)) * 4);
345 lpfc_sli_update_full_ring(struct lpfc_hba * phba,
346 struct lpfc_sli_ring *pring)
348 int ringno = pring->ringno;
350 pring->flag |= LPFC_CALL_RING_AVAILABLE;
355 * Set ring 'ringno' to SET R0CE_REQ in Chip Att register.
356 * The HBA will tell us when an IOCB entry is available.
358 writel((CA_R0ATT|CA_R0CE_REQ) << (ringno*4), phba->CAregaddr);
359 readl(phba->CAregaddr); /* flush */
361 pring->stats.iocb_cmd_full++;
365 lpfc_sli_update_ring(struct lpfc_hba * phba,
366 struct lpfc_sli_ring *pring)
368 int ringno = pring->ringno;
371 * Tell the HBA that there is work to do in this ring.
374 writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
375 readl(phba->CAregaddr); /* flush */
379 lpfc_sli_resume_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
382 struct lpfc_iocbq *nextiocb;
386 * (a) there is anything on the txq to send
388 * (c) link attention events can be processed (fcp ring only)
389 * (d) IOCB processing is not blocked by the outstanding mbox command.
391 if (pring->txq_cnt &&
392 (phba->hba_state > LPFC_LINK_DOWN) &&
393 (pring->ringno != phba->sli.fcp_ring ||
394 phba->sli.sli_flag & LPFC_PROCESS_LA) &&
395 !(pring->flag & LPFC_STOP_IOCB_MBX)) {
397 while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
398 (nextiocb = lpfc_sli_ringtx_get(phba, pring)))
399 lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
402 lpfc_sli_update_ring(phba, pring);
404 lpfc_sli_update_full_ring(phba, pring);
410 /* lpfc_sli_turn_on_ring is only called by lpfc_sli_handle_mb_event below */
412 lpfc_sli_turn_on_ring(struct lpfc_hba * phba, int ringno)
416 (((MAILBOX_t *)phba->sli.MBhostaddr)->us.s2.port[ringno]));
418 /* If the ring is active, flag it */
419 if (phba->sli.ring[ringno].cmdringaddr) {
420 if (phba->sli.ring[ringno].flag & LPFC_STOP_IOCB_MBX) {
421 phba->sli.ring[ringno].flag &= ~LPFC_STOP_IOCB_MBX;
423 * Force update of the local copy of cmdGetInx
425 phba->sli.ring[ringno].local_getidx
426 = le32_to_cpu(pgp->cmdGetInx);
427 spin_lock_irq(phba->host->host_lock);
428 lpfc_sli_resume_iocb(phba, &phba->sli.ring[ringno]);
429 spin_unlock_irq(phba->host->host_lock);
435 lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
439 switch (mbxCommand) {
443 case MBX_RUN_BIU_DIAG:
446 case MBX_CONFIG_LINK:
447 case MBX_CONFIG_RING:
449 case MBX_READ_CONFIG:
450 case MBX_READ_RCONFIG:
452 case MBX_READ_STATUS:
456 case MBX_READ_LNK_STAT:
458 case MBX_UNREG_LOGIN:
461 case MBX_DUMP_MEMORY:
462 case MBX_DUMP_CONTEXT:
467 case MBX_DEL_LD_ENTRY:
468 case MBX_RUN_PROGRAM:
472 case MBX_CONFIG_FARP:
474 case MBX_RUN_BIU_DIAG64:
475 case MBX_CONFIG_PORT:
476 case MBX_READ_SPARM64:
478 case MBX_REG_LOGIN64:
480 case MBX_FLASH_WR_ULA:
482 case MBX_LOAD_EXP_ROM:
492 lpfc_sli_wake_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
494 wait_queue_head_t *pdone_q;
497 * If pdone_q is empty, the driver thread gave up waiting and
500 pdone_q = (wait_queue_head_t *) pmboxq->context1;
502 wake_up_interruptible(pdone_q);
507 lpfc_sli_def_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
509 struct lpfc_dmabuf *mp;
510 mp = (struct lpfc_dmabuf *) (pmb->context1);
512 lpfc_mbuf_free(phba, mp->virt, mp->phys);
515 mempool_free( pmb, phba->mbox_mem_pool);
520 lpfc_sli_handle_mb_event(struct lpfc_hba * phba)
525 struct lpfc_sli *psli;
527 uint32_t process_next;
530 /* We should only get here if we are in SLI2 mode */
531 if (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE)) {
535 phba->sli.slistat.mbox_event++;
537 /* Get a Mailbox buffer to setup mailbox commands for callback */
538 if ((pmb = phba->sli.mbox_active)) {
540 mbox = (MAILBOX_t *) phba->sli.MBhostaddr;
542 /* First check out the status word */
543 lpfc_sli_pcimem_bcopy(mbox, pmbox, sizeof (uint32_t));
545 /* Sanity check to ensure the host owns the mailbox */
546 if (pmbox->mbxOwner != OWN_HOST) {
547 /* Lets try for a while */
548 for (i = 0; i < 10240; i++) {
549 /* First copy command data */
550 lpfc_sli_pcimem_bcopy(mbox, pmbox,
552 if (pmbox->mbxOwner == OWN_HOST)
555 /* Stray Mailbox Interrupt, mbxCommand <cmd> mbxStatus
557 lpfc_printf_log(phba,
560 "%d:0304 Stray Mailbox Interrupt "
561 "mbxCommand x%x mbxStatus x%x\n",
566 spin_lock_irq(phba->host->host_lock);
567 phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
568 spin_unlock_irq(phba->host->host_lock);
573 del_timer_sync(&phba->sli.mbox_tmo);
574 phba->work_hba_events &= ~WORKER_MBOX_TMO;
577 * It is a fatal error if unknown mbox command completion.
579 if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
582 /* Unknow mailbox command compl */
583 lpfc_printf_log(phba,
586 "%d:0323 Unknown Mailbox command %x Cmpl\n",
589 phba->hba_state = LPFC_HBA_ERROR;
590 phba->work_hs = HS_FFER3;
591 lpfc_handle_eratt(phba);
595 phba->sli.mbox_active = NULL;
596 if (pmbox->mbxStatus) {
597 phba->sli.slistat.mbox_stat_err++;
598 if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
599 /* Mbox cmd cmpl error - RETRYing */
600 lpfc_printf_log(phba,
603 "%d:0305 Mbox cmd cmpl error - "
604 "RETRYing Data: x%x x%x x%x x%x\n",
608 pmbox->un.varWords[0],
610 pmbox->mbxStatus = 0;
611 pmbox->mbxOwner = OWN_HOST;
612 spin_lock_irq(phba->host->host_lock);
613 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
614 spin_unlock_irq(phba->host->host_lock);
615 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
616 if (rc == MBX_SUCCESS)
621 /* Mailbox cmd <cmd> Cmpl <cmpl> */
622 lpfc_printf_log(phba,
625 "%d:0307 Mailbox cmd x%x Cmpl x%p "
626 "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
630 *((uint32_t *) pmbox),
631 pmbox->un.varWords[0],
632 pmbox->un.varWords[1],
633 pmbox->un.varWords[2],
634 pmbox->un.varWords[3],
635 pmbox->un.varWords[4],
636 pmbox->un.varWords[5],
637 pmbox->un.varWords[6],
638 pmbox->un.varWords[7]);
640 if (pmb->mbox_cmpl) {
641 lpfc_sli_pcimem_bcopy(mbox, pmbox, MAILBOX_CMD_SIZE);
642 pmb->mbox_cmpl(phba,pmb);
648 process_next = 0; /* by default don't loop */
649 spin_lock_irq(phba->host->host_lock);
650 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
652 /* Process next mailbox command if there is one */
653 if ((pmb = lpfc_mbox_get(phba))) {
654 spin_unlock_irq(phba->host->host_lock);
655 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
656 if (rc == MBX_NOT_FINISHED) {
657 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
658 pmb->mbox_cmpl(phba,pmb);
660 continue; /* loop back */
663 spin_unlock_irq(phba->host->host_lock);
664 /* Turn on IOCB processing */
665 for (i = 0; i < phba->sli.num_rings; i++) {
666 lpfc_sli_turn_on_ring(phba, i);
669 /* Free any lpfc_dmabuf's waiting for mbox cmd cmpls */
670 while (!list_empty(&phba->freebufList)) {
671 struct lpfc_dmabuf *mp;
674 list_remove_head((&phba->freebufList),
679 lpfc_mbuf_free(phba, mp->virt,
686 } while (process_next);
691 lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
692 struct lpfc_iocbq *saveq)
700 irsp = &(saveq->iocb);
701 if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX)
702 || (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX)) {
707 (WORD5 *) & (saveq->iocb.un.
709 Rctl = w5p->hcsw.Rctl;
710 Type = w5p->hcsw.Type;
712 /* Firmware Workaround */
713 if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) &&
714 (irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX)) {
717 w5p->hcsw.Rctl = Rctl;
718 w5p->hcsw.Type = Type;
721 /* unSolicited Responses */
722 if (pring->prt[0].profile) {
723 (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring, saveq);
726 /* We must search, based on rctl / type
727 for the right routine */
728 for (i = 0; i < pring->num_mask;
730 if ((pring->prt[i].rctl ==
734 (pring->prt[i].lpfc_sli_rcv_unsol_event)
735 (phba, pring, saveq);
742 /* Unexpected Rctl / Type received */
743 /* Ring <ringno> handler: unexpected
744 Rctl <Rctl> Type <Type> received */
745 lpfc_printf_log(phba,
748 "%d:0313 Ring %d handler: unexpected Rctl x%x "
749 "Type x%x received \n",
758 static struct lpfc_iocbq *
759 lpfc_sli_txcmpl_ring_search_slow(struct lpfc_sli_ring * pring,
760 struct lpfc_iocbq * prspiocb)
764 struct lpfc_iocbq *cmd_iocb;
765 struct lpfc_iocbq *iocb, *next_iocb;
768 irsp = &prspiocb->iocb;
769 iotag = irsp->ulpIoTag;
772 /* Search through txcmpl from the begining */
773 list_for_each_entry_safe(iocb, next_iocb, &(pring->txcmplq), list) {
775 if (iotag == icmd->ulpIoTag) {
778 list_del(&iocb->list);
779 pring->txcmplq_cnt--;
787 static struct lpfc_iocbq *
788 lpfc_sli_txcmpl_ring_iotag_lookup(struct lpfc_hba * phba,
789 struct lpfc_sli_ring * pring,
790 struct lpfc_iocbq * prspiocb)
793 struct lpfc_iocbq *cmd_iocb = NULL;
796 if (unlikely(pring->fast_lookup == NULL))
799 /* Use fast lookup based on iotag for completion */
800 irsp = &prspiocb->iocb;
801 iotag = irsp->ulpIoTag;
802 if (iotag < pring->fast_iotag) {
803 cmd_iocb = *(pring->fast_lookup + iotag);
804 *(pring->fast_lookup + iotag) = NULL;
806 list_del(&cmd_iocb->list);
807 pring->txcmplq_cnt--;
811 * This is clearly an error. A ring that uses iotags
812 * should never have a interrupt for a completion that
813 * is not on the ring. Return NULL and log a error.
815 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
816 "%d:0327 Rsp ring %d error - command "
817 "completion for iotag x%x not found\n",
818 phba->brd_no, pring->ringno, iotag);
824 * Rsp ring <ringno> get: iotag <iotag> greater then
825 * configured max <fast_iotag> wd0 <irsp>. This is an
826 * error. Just return NULL.
828 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
829 "%d:0317 Rsp ring %d get: iotag x%x greater then "
830 "configured max x%x wd0 x%x\n",
831 phba->brd_no, pring->ringno, iotag, pring->fast_iotag,
832 *(((uint32_t *) irsp) + 7));
837 lpfc_sli_process_sol_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
838 struct lpfc_iocbq *saveq)
840 struct lpfc_iocbq * cmdiocbp;
844 /* Based on the iotag field, get the cmd IOCB from the txcmplq */
845 spin_lock_irqsave(phba->host->host_lock, iflag);
846 cmdiocbp = lpfc_sli_txcmpl_ring_search_slow(pring, saveq);
848 if (cmdiocbp->iocb_cmpl) {
850 * Post all ELS completions to the worker thread.
851 * All other are passed to the completion callback.
853 if (pring->ringno == LPFC_ELS_RING) {
854 spin_unlock_irqrestore(phba->host->host_lock,
856 (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
857 spin_lock_irqsave(phba->host->host_lock, iflag);
860 if (cmdiocbp->iocb_flag & LPFC_IO_POLL)
863 spin_unlock_irqrestore(phba->host->host_lock,
865 (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
866 spin_lock_irqsave(phba->host->host_lock, iflag);
869 list_add_tail(&cmdiocbp->list, &phba->lpfc_iocb_list);
873 * Unknown initiating command based on the response iotag.
874 * This could be the case on the ELS ring because of
877 if (pring->ringno != LPFC_ELS_RING) {
879 * Ring <ringno> handler: unexpected completion IoTag
882 lpfc_printf_log(phba,
885 "%d:0322 Ring %d handler: unexpected "
886 "completion IoTag x%x Data: x%x x%x x%x x%x\n",
889 saveq->iocb.ulpIoTag,
890 saveq->iocb.ulpStatus,
891 saveq->iocb.un.ulpWord[4],
892 saveq->iocb.ulpCommand,
893 saveq->iocb.ulpContext);
896 spin_unlock_irqrestore(phba->host->host_lock, iflag);
901 * This routine presumes LPFC_FCP_RING handling and doesn't bother
902 * to check it explicitly.
905 lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
906 struct lpfc_sli_ring * pring, uint32_t mask)
909 struct lpfc_iocbq *cmdiocbq = NULL;
910 struct lpfc_iocbq rspiocbq;
913 uint32_t portRspPut, portRspMax;
917 uint32_t rsp_cmpl = 0;
918 void __iomem *to_slim;
920 spin_lock_irqsave(phba->host->host_lock, iflag);
921 pring->stats.iocb_event++;
923 /* The driver assumes SLI-2 mode */
924 pgp = (PGP *) &((MAILBOX_t *) phba->sli.MBhostaddr)
925 ->us.s2.port[pring->ringno];
928 * The next available response entry should never exceed the maximum
929 * entries. If it does, treat it as an adapter hardware error.
931 portRspMax = pring->numRiocb;
932 portRspPut = le32_to_cpu(pgp->rspPutInx);
933 if (unlikely(portRspPut >= portRspMax)) {
935 * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
936 * rsp ring <portRspMax>
938 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
939 "%d:0312 Ring %d handler: portRspPut %d "
940 "is bigger then rsp ring %d\n",
941 phba->brd_no, pring->ringno, portRspPut,
944 phba->hba_state = LPFC_HBA_ERROR;
946 /* All error attention handlers are posted to worker thread */
947 phba->work_ha |= HA_ERATT;
948 phba->work_hs = HS_FFER3;
950 wake_up(phba->work_wait);
952 spin_unlock_irqrestore(phba->host->host_lock, iflag);
957 while (pring->rspidx != portRspPut) {
958 irsp = (IOCB_t *) IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
959 type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
960 pring->stats.iocb_rsp++;
963 if (unlikely(irsp->ulpStatus)) {
964 /* Rsp ring <ringno> error: IOCB */
965 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
966 "%d:0326 Rsp Ring %d error: IOCB Data: "
967 "x%x x%x x%x x%x x%x x%x x%x x%x\n",
968 phba->brd_no, pring->ringno,
969 irsp->un.ulpWord[0], irsp->un.ulpWord[1],
970 irsp->un.ulpWord[2], irsp->un.ulpWord[3],
971 irsp->un.ulpWord[4], irsp->un.ulpWord[5],
972 *(((uint32_t *) irsp) + 6),
973 *(((uint32_t *) irsp) + 7));
977 case LPFC_ABORT_IOCB:
980 * Idle exchange closed via ABTS from port. No iocb
981 * resources need to be recovered.
983 if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
984 printk(KERN_INFO "%s: IOCB cmd 0x%x processed. "
985 "Skipping completion\n", __FUNCTION__,
990 rspiocbq.iocb.un.ulpWord[4] = irsp->un.ulpWord[4];
991 rspiocbq.iocb.ulpStatus = irsp->ulpStatus;
992 rspiocbq.iocb.ulpContext = irsp->ulpContext;
993 rspiocbq.iocb.ulpIoTag = irsp->ulpIoTag;
994 cmdiocbq = lpfc_sli_txcmpl_ring_iotag_lookup(phba,
997 if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
998 spin_unlock_irqrestore(
999 phba->host->host_lock, iflag);
1000 (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1002 spin_lock_irqsave(phba->host->host_lock,
1007 if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1008 char adaptermsg[LPFC_MAX_ADPTMSG];
1009 memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
1010 memcpy(&adaptermsg[0], (uint8_t *) irsp,
1012 dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
1013 phba->brd_no, adaptermsg);
1015 /* Unknown IOCB command */
1016 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1017 "%d:0321 Unknown IOCB command "
1018 "Data: x%x, x%x x%x x%x x%x\n",
1019 phba->brd_no, type, irsp->ulpCommand,
1020 irsp->ulpStatus, irsp->ulpIoTag,
1027 * The response IOCB has been processed. Update the ring
1028 * pointer in SLIM. If the port response put pointer has not
1029 * been updated, sync the pgp->rspPutInx and fetch the new port
1030 * response put pointer.
1032 if (++pring->rspidx >= portRspMax)
1035 to_slim = phba->MBslimaddr +
1036 (SLIMOFF + (pring->ringno * 2) + 1) * 4;
1037 writeb(pring->rspidx, to_slim);
1039 if (pring->rspidx == portRspPut)
1040 portRspPut = le32_to_cpu(pgp->rspPutInx);
1043 if ((rsp_cmpl > 0) && (mask & HA_R0RE_REQ)) {
1044 pring->stats.iocb_rsp_full++;
1045 status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
1046 writel(status, phba->CAregaddr);
1047 readl(phba->CAregaddr);
1049 if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1050 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1051 pring->stats.iocb_cmd_empty++;
1053 /* Force update of the local copy of cmdGetInx */
1054 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1055 lpfc_sli_resume_iocb(phba, pring);
1057 if ((pring->lpfc_sli_cmd_available))
1058 (pring->lpfc_sli_cmd_available) (phba, pring);
1062 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1068 lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
1069 struct lpfc_sli_ring * pring, uint32_t mask)
1072 IOCB_t *irsp = NULL;
1073 struct lpfc_iocbq *rspiocbp = NULL;
1074 struct lpfc_iocbq *next_iocb;
1075 struct lpfc_iocbq *cmdiocbp;
1076 struct lpfc_iocbq *saveq;
1077 struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
1081 uint8_t iocb_cmd_type;
1082 lpfc_iocb_type type;
1083 uint32_t status, free_saveq;
1084 uint32_t portRspPut, portRspMax;
1086 unsigned long iflag;
1087 void __iomem *to_slim;
1089 spin_lock_irqsave(phba->host->host_lock, iflag);
1090 pring->stats.iocb_event++;
1092 /* The driver assumes SLI-2 mode */
1093 mbox = (MAILBOX_t *) phba->sli.MBhostaddr;
1094 pgp = (PGP *) & mbox->us.s2.port[pring->ringno];
1095 hgp = (HGP *) & mbox->us.s2.host[pring->ringno];
1098 * The next available response entry should never exceed the maximum
1099 * entries. If it does, treat it as an adapter hardware error.
1101 portRspMax = pring->numRiocb;
1102 portRspPut = le32_to_cpu(pgp->rspPutInx);
1103 if (portRspPut >= portRspMax) {
1105 * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
1106 * rsp ring <portRspMax>
1108 lpfc_printf_log(phba,
1111 "%d:0312 Ring %d handler: portRspPut %d "
1112 "is bigger then rsp ring %d\n",
1114 pring->ringno, portRspPut, portRspMax);
1116 phba->hba_state = LPFC_HBA_ERROR;
1117 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1119 phba->work_hs = HS_FFER3;
1120 lpfc_handle_eratt(phba);
1126 lpfc_iocb_list = &phba->lpfc_iocb_list;
1127 while (pring->rspidx != portRspPut) {
1129 * Build a completion list and call the appropriate handler.
1130 * The process is to get the next available response iocb, get
1131 * a free iocb from the list, copy the response data into the
1132 * free iocb, insert to the continuation list, and update the
1133 * next response index to slim. This process makes response
1134 * iocb's in the ring available to DMA as fast as possible but
1135 * pays a penalty for a copy operation. Since the iocb is
1136 * only 32 bytes, this penalty is considered small relative to
1137 * the PCI reads for register values and a slim write. When
1138 * the ulpLe field is set, the entire Command has been
1141 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
1142 list_remove_head(lpfc_iocb_list, rspiocbp, struct lpfc_iocbq,
1144 if (rspiocbp == NULL) {
1145 printk(KERN_ERR "%s: out of buffers! Failing "
1146 "completion.\n", __FUNCTION__);
1150 lpfc_sli_pcimem_bcopy(entry, &rspiocbp->iocb, sizeof (IOCB_t));
1151 irsp = &rspiocbp->iocb;
1153 if (++pring->rspidx >= portRspMax)
1156 to_slim = phba->MBslimaddr + (SLIMOFF + (pring->ringno * 2)
1158 writeb(pring->rspidx, to_slim);
1160 if (list_empty(&(pring->iocb_continueq))) {
1161 list_add(&rspiocbp->list, &(pring->iocb_continueq));
1163 list_add_tail(&rspiocbp->list,
1164 &(pring->iocb_continueq));
1167 pring->iocb_continueq_cnt++;
1170 * By default, the driver expects to free all resources
1171 * associated with this iocb completion.
1174 saveq = list_get_first(&pring->iocb_continueq,
1175 struct lpfc_iocbq, list);
1176 irsp = &(saveq->iocb);
1177 list_del_init(&pring->iocb_continueq);
1178 pring->iocb_continueq_cnt = 0;
1180 pring->stats.iocb_rsp++;
1182 if (irsp->ulpStatus) {
1183 /* Rsp ring <ringno> error: IOCB */
1184 lpfc_printf_log(phba,
1187 "%d:0328 Rsp Ring %d error: IOCB Data: "
1188 "x%x x%x x%x x%x x%x x%x x%x x%x\n",
1191 irsp->un.ulpWord[0],
1192 irsp->un.ulpWord[1],
1193 irsp->un.ulpWord[2],
1194 irsp->un.ulpWord[3],
1195 irsp->un.ulpWord[4],
1196 irsp->un.ulpWord[5],
1197 *(((uint32_t *) irsp) + 6),
1198 *(((uint32_t *) irsp) + 7));
1202 * Fetch the IOCB command type and call the correct
1203 * completion routine. Solicited and Unsolicited
1204 * IOCBs on the ELS ring get freed back to the
1205 * lpfc_iocb_list by the discovery kernel thread.
1207 iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
1208 type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
1209 if (type == LPFC_SOL_IOCB) {
1210 spin_unlock_irqrestore(phba->host->host_lock,
1212 rc = lpfc_sli_process_sol_iocb(phba, pring,
1214 spin_lock_irqsave(phba->host->host_lock, iflag);
1215 } else if (type == LPFC_UNSOL_IOCB) {
1216 spin_unlock_irqrestore(phba->host->host_lock,
1218 rc = lpfc_sli_process_unsol_iocb(phba, pring,
1220 spin_lock_irqsave(phba->host->host_lock, iflag);
1221 } else if (type == LPFC_ABORT_IOCB) {
1222 if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
1224 lpfc_sli_txcmpl_ring_search_slow(pring,
1226 /* Call the specified completion
1228 if (cmdiocbp->iocb_cmpl) {
1229 spin_unlock_irqrestore(
1230 phba->host->host_lock,
1232 (cmdiocbp->iocb_cmpl) (phba,
1235 phba->host->host_lock,
1238 list_add_tail(&cmdiocbp->list,
1242 } else if (type == LPFC_UNKNOWN_IOCB) {
1243 if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1245 char adaptermsg[LPFC_MAX_ADPTMSG];
1247 memset(adaptermsg, 0,
1249 memcpy(&adaptermsg[0], (uint8_t *) irsp,
1251 dev_warn(&((phba->pcidev)->dev),
1253 phba->brd_no, adaptermsg);
1255 /* Unknown IOCB command */
1256 lpfc_printf_log(phba,
1259 "%d:0321 Unknown IOCB command "
1260 "Data: x%x x%x x%x x%x\n",
1270 if (!list_empty(&saveq->list)) {
1271 list_for_each_entry_safe(rspiocbp,
1275 list_add_tail(&rspiocbp->list,
1280 list_add_tail(&saveq->list, lpfc_iocb_list);
1285 * If the port response put pointer has not been updated, sync
1286 * the pgp->rspPutInx in the MAILBOX_tand fetch the new port
1287 * response put pointer.
1289 if (pring->rspidx == portRspPut) {
1290 portRspPut = le32_to_cpu(pgp->rspPutInx);
1292 } /* while (pring->rspidx != portRspPut) */
1294 if ((rspiocbp != 0) && (mask & HA_R0RE_REQ)) {
1295 /* At least one response entry has been freed */
1296 pring->stats.iocb_rsp_full++;
1297 /* SET RxRE_RSP in Chip Att register */
1298 status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
1299 writel(status, phba->CAregaddr);
1300 readl(phba->CAregaddr); /* flush */
1302 if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1303 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1304 pring->stats.iocb_cmd_empty++;
1306 /* Force update of the local copy of cmdGetInx */
1307 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1308 lpfc_sli_resume_iocb(phba, pring);
1310 if ((pring->lpfc_sli_cmd_available))
1311 (pring->lpfc_sli_cmd_available) (phba, pring);
1315 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1320 lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
1322 struct lpfc_iocbq *iocb, *next_iocb;
1323 IOCB_t *icmd = NULL, *cmd = NULL;
1329 /* Error everything on txq and txcmplq
1332 spin_lock_irq(phba->host->host_lock);
1333 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
1334 list_del_init(&iocb->list);
1335 if (iocb->iocb_cmpl) {
1337 icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
1338 icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
1339 spin_unlock_irq(phba->host->host_lock);
1340 (iocb->iocb_cmpl) (phba, iocb, iocb);
1341 spin_lock_irq(phba->host->host_lock);
1343 list_add_tail(&iocb->list, &phba->lpfc_iocb_list);
1347 INIT_LIST_HEAD(&(pring->txq));
1349 /* Next issue ABTS for everything on the txcmplq */
1350 list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
1354 * Imediate abort of IOCB, clear fast_lookup entry,
1355 * if any, deque and call compl
1357 iotag = cmd->ulpIoTag;
1358 if (iotag && pring->fast_lookup &&
1359 (iotag < pring->fast_iotag))
1360 pring->fast_lookup[iotag] = NULL;
1362 list_del_init(&iocb->list);
1363 pring->txcmplq_cnt--;
1365 if (iocb->iocb_cmpl) {
1366 cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
1367 cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
1368 spin_unlock_irq(phba->host->host_lock);
1369 (iocb->iocb_cmpl) (phba, iocb, iocb);
1370 spin_lock_irq(phba->host->host_lock);
1372 list_add_tail(&iocb->list, &phba->lpfc_iocb_list);
1376 INIT_LIST_HEAD(&pring->txcmplq);
1377 pring->txcmplq_cnt = 0;
1378 spin_unlock_irq(phba->host->host_lock);
1383 /******************************************************************************
1384 * lpfc_sli_send_reset
1386 * Note: After returning from this function, the HBA cannot be accessed for
1387 * 1 ms. Since we do not wish to delay in interrupt context, it is the
1388 * responsibility of the caller to perform the mdelay(1) and flush via readl().
1389 ******************************************************************************/
1391 lpfc_sli_send_reset(struct lpfc_hba * phba, uint16_t skip_post)
1394 volatile uint32_t word0;
1395 void __iomem *to_slim;
1396 unsigned long flags = 0;
1398 spin_lock_irqsave(phba->host->host_lock, flags);
1400 /* A board reset must use REAL SLIM. */
1401 phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
1404 swpmb = (MAILBOX_t *) & word0;
1405 swpmb->mbxCommand = MBX_RESTART;
1408 to_slim = phba->MBslimaddr;
1409 writel(*(uint32_t *) swpmb, to_slim);
1410 readl(to_slim); /* flush */
1412 /* Only skip post after fc_ffinit is completed */
1414 word0 = 1; /* This is really setting up word1 */
1416 word0 = 0; /* This is really setting up word1 */
1418 to_slim = phba->MBslimaddr + sizeof (uint32_t);
1419 writel(*(uint32_t *) swpmb, to_slim);
1420 readl(to_slim); /* flush */
1422 /* Turn off parity checking and serr during the physical reset */
1423 pci_read_config_word(phba->pcidev, PCI_COMMAND, &phba->pci_cfg_value);
1424 pci_write_config_word(phba->pcidev, PCI_COMMAND,
1425 (phba->pci_cfg_value &
1426 ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
1428 writel(HC_INITFF, phba->HCregaddr);
1430 phba->hba_state = LPFC_INIT_START;
1431 spin_unlock_irqrestore(phba->host->host_lock, flags);
1437 lpfc_sli_brdreset(struct lpfc_hba * phba, uint16_t skip_post)
1439 struct lpfc_sli_ring *pring;
1441 struct lpfc_dmabuf *mp, *next_mp;
1442 unsigned long flags = 0;
1444 lpfc_sli_send_reset(phba, skip_post);
1447 spin_lock_irqsave(phba->host->host_lock, flags);
1448 /* Risk the write on flush case ie no delay after the readl */
1449 readl(phba->HCregaddr); /* flush */
1450 /* Now toggle INITFF bit set by lpfc_sli_send_reset */
1451 writel(0, phba->HCregaddr);
1452 readl(phba->HCregaddr); /* flush */
1454 /* Restore PCI cmd register */
1455 pci_write_config_word(phba->pcidev, PCI_COMMAND, phba->pci_cfg_value);
1457 /* perform board reset */
1458 phba->fc_eventTag = 0;
1460 phba->fc_prevDID = Mask_DID;
1463 lpfc_printf_log(phba,
1466 "%d:0325 Reset HBA Data: x%x x%x x%x\n",
1472 /* Initialize relevant SLI info */
1473 for (i = 0; i < phba->sli.num_rings; i++) {
1474 pring = &phba->sli.ring[i];
1477 pring->next_cmdidx = 0;
1478 pring->local_getidx = 0;
1480 pring->missbufcnt = 0;
1482 spin_unlock_irqrestore(phba->host->host_lock, flags);
1490 spin_lock_irqsave(phba->host->host_lock, flags);
1491 /* Cleanup preposted buffers on the ELS ring */
1492 pring = &phba->sli.ring[LPFC_ELS_RING];
1493 list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
1494 list_del(&mp->list);
1495 pring->postbufq_cnt--;
1496 lpfc_mbuf_free(phba, mp->virt, mp->phys);
1499 spin_unlock_irqrestore(phba->host->host_lock, flags);
1501 for (i = 0; i < phba->sli.num_rings; i++)
1502 lpfc_sli_abort_iocb_ring(phba, &phba->sli.ring[i]);
1508 lpfc_sli_chipset_init(struct lpfc_hba *phba)
1510 uint32_t status, i = 0;
1512 /* Read the HBA Host Status Register */
1513 status = readl(phba->HSregaddr);
1515 /* Check status register to see what current state is */
1517 while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) {
1519 /* Check every 100ms for 5 retries, then every 500ms for 5, then
1520 * every 2.5 sec for 5, then reset board and every 2.5 sec for
1524 /* Adapter failed to init, timeout, status reg
1526 lpfc_printf_log(phba,
1529 "%d:0436 Adapter failed to init, "
1530 "timeout, status reg x%x\n",
1533 phba->hba_state = LPFC_HBA_ERROR;
1537 /* Check to see if any errors occurred during init */
1538 if (status & HS_FFERM) {
1539 /* ERROR: During chipset initialization */
1540 /* Adapter failed to init, chipset, status reg
1542 lpfc_printf_log(phba,
1545 "%d:0437 Adapter failed to init, "
1546 "chipset, status reg x%x\n",
1549 phba->hba_state = LPFC_HBA_ERROR;
1555 } else if (i <= 10) {
1562 lpfc_sli_brdreset(phba, 0);
1564 /* Read the HBA Host Status Register */
1565 status = readl(phba->HSregaddr);
1568 /* Check to see if any errors occurred during init */
1569 if (status & HS_FFERM) {
1570 /* ERROR: During chipset initialization */
1571 /* Adapter failed to init, chipset, status reg <status> */
1572 lpfc_printf_log(phba,
1575 "%d:0438 Adapter failed to init, chipset, "
1579 phba->hba_state = LPFC_HBA_ERROR;
1583 /* Clear all interrupt enable conditions */
1584 writel(0, phba->HCregaddr);
1585 readl(phba->HCregaddr); /* flush */
1587 /* setup host attn register */
1588 writel(0xffffffff, phba->HAregaddr);
1589 readl(phba->HAregaddr); /* flush */
1594 lpfc_sli_hba_setup(struct lpfc_hba * phba)
1597 uint32_t resetcount = 0, rc = 0, done = 0;
1599 pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1601 phba->hba_state = LPFC_HBA_ERROR;
1605 while (resetcount < 2 && !done) {
1606 phba->hba_state = 0;
1607 lpfc_sli_brdreset(phba, 0);
1609 rc = lpfc_sli_chipset_init(phba);
1615 /* Call pre CONFIG_PORT mailbox command initialization. A value of 0
1616 * means the call was successful. Any other nonzero value is a failure,
1617 * but if ERESTART is returned, the driver may reset the HBA and try
1620 rc = lpfc_config_port_prep(phba);
1621 if (rc == -ERESTART) {
1622 phba->hba_state = 0;
1628 phba->hba_state = LPFC_INIT_MBX_CMDS;
1629 lpfc_config_port(phba, pmb);
1630 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
1631 if (rc == MBX_SUCCESS)
1634 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1635 "%d:0442 Adapter failed to init, mbxCmd x%x "
1636 "CONFIG_PORT, mbxStatus x%x Data: x%x\n",
1637 phba->brd_no, pmb->mb.mbxCommand,
1638 pmb->mb.mbxStatus, 0);
1639 phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
1643 goto lpfc_sli_hba_setup_error;
1645 rc = lpfc_sli_ring_map(phba, pmb);
1648 goto lpfc_sli_hba_setup_error;
1650 phba->sli.sli_flag |= LPFC_PROCESS_LA;
1652 rc = lpfc_config_port_post(phba);
1654 goto lpfc_sli_hba_setup_error;
1656 goto lpfc_sli_hba_setup_exit;
1657 lpfc_sli_hba_setup_error:
1658 phba->hba_state = LPFC_HBA_ERROR;
1659 lpfc_sli_hba_setup_exit:
1660 mempool_free(pmb, phba->mbox_mem_pool);
1665 lpfc_mbox_abort(struct lpfc_hba * phba)
1667 LPFC_MBOXQ_t *pmbox;
1670 if (phba->sli.mbox_active) {
1671 del_timer_sync(&phba->sli.mbox_tmo);
1672 phba->work_hba_events &= ~WORKER_MBOX_TMO;
1673 pmbox = phba->sli.mbox_active;
1675 phba->sli.mbox_active = NULL;
1676 if (pmbox->mbox_cmpl) {
1677 mb->mbxStatus = MBX_NOT_FINISHED;
1678 (pmbox->mbox_cmpl) (phba, pmbox);
1680 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1683 /* Abort all the non active mailbox commands. */
1684 spin_lock_irq(phba->host->host_lock);
1685 pmbox = lpfc_mbox_get(phba);
1688 if (pmbox->mbox_cmpl) {
1689 mb->mbxStatus = MBX_NOT_FINISHED;
1690 spin_unlock_irq(phba->host->host_lock);
1691 (pmbox->mbox_cmpl) (phba, pmbox);
1692 spin_lock_irq(phba->host->host_lock);
1694 pmbox = lpfc_mbox_get(phba);
1696 spin_unlock_irq(phba->host->host_lock);
1700 /*! lpfc_mbox_timeout
1704 * \param hba Pointer to per struct lpfc_hba structure
1705 * \param l1 Pointer to the driver's mailbox queue.
1711 * This routine handles mailbox timeout events at timer interrupt context.
1714 lpfc_mbox_timeout(unsigned long ptr)
1716 struct lpfc_hba *phba;
1717 unsigned long iflag;
1719 phba = (struct lpfc_hba *)ptr;
1720 spin_lock_irqsave(phba->host->host_lock, iflag);
1721 if (!(phba->work_hba_events & WORKER_MBOX_TMO)) {
1722 phba->work_hba_events |= WORKER_MBOX_TMO;
1723 if (phba->work_wait)
1724 wake_up(phba->work_wait);
1726 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1730 lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
1732 LPFC_MBOXQ_t *pmbox;
1735 spin_lock_irq(phba->host->host_lock);
1736 if (!(phba->work_hba_events & WORKER_MBOX_TMO)) {
1737 spin_unlock_irq(phba->host->host_lock);
1741 pmbox = phba->sli.mbox_active;
1744 /* Mbox cmd <mbxCommand> timeout */
1745 lpfc_printf_log(phba,
1748 "%d:0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
1753 phba->sli.mbox_active);
1755 if (phba->sli.mbox_active == pmbox) {
1756 phba->sli.mbox_active = NULL;
1757 if (pmbox->mbox_cmpl) {
1758 mb->mbxStatus = MBX_NOT_FINISHED;
1759 spin_unlock_irq(phba->host->host_lock);
1760 (pmbox->mbox_cmpl) (phba, pmbox);
1761 spin_lock_irq(phba->host->host_lock);
1763 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1766 spin_unlock_irq(phba->host->host_lock);
1767 lpfc_mbox_abort(phba);
1772 lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
1776 struct lpfc_sli *psli;
1777 uint32_t status, evtctr;
1780 unsigned long drvr_flag = 0;
1781 volatile uint32_t word0, ldata;
1782 void __iomem *to_slim;
1786 spin_lock_irqsave(phba->host->host_lock, drvr_flag);
1790 status = MBX_SUCCESS;
1792 if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
1793 /* Polling for a mbox command when another one is already active
1794 * is not allowed in SLI. Also, the driver must have established
1795 * SLI2 mode to queue and process multiple mbox commands.
1798 if (flag & MBX_POLL) {
1799 spin_unlock_irqrestore(phba->host->host_lock,
1802 /* Mbox command <mbxCommand> cannot issue */
1803 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
1804 return (MBX_NOT_FINISHED);
1807 if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
1808 spin_unlock_irqrestore(phba->host->host_lock,
1810 /* Mbox command <mbxCommand> cannot issue */
1811 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
1812 return (MBX_NOT_FINISHED);
1815 /* Handle STOP IOCB processing flag. This is only meaningful
1816 * if we are not polling for mbox completion.
1818 if (flag & MBX_STOP_IOCB) {
1819 flag &= ~MBX_STOP_IOCB;
1820 /* Now flag each ring */
1821 for (i = 0; i < psli->num_rings; i++) {
1822 /* If the ring is active, flag it */
1823 if (psli->ring[i].cmdringaddr) {
1824 psli->ring[i].flag |=
1830 /* Another mailbox command is still being processed, queue this
1831 * command to be processed later.
1833 lpfc_mbox_put(phba, pmbox);
1835 /* Mbox cmd issue - BUSY */
1836 lpfc_printf_log(phba,
1839 "%d:0308 Mbox cmd issue - BUSY Data: x%x x%x x%x x%x\n",
1846 psli->slistat.mbox_busy++;
1847 spin_unlock_irqrestore(phba->host->host_lock,
1853 /* Handle STOP IOCB processing flag. This is only meaningful
1854 * if we are not polling for mbox completion.
1856 if (flag & MBX_STOP_IOCB) {
1857 flag &= ~MBX_STOP_IOCB;
1858 if (flag == MBX_NOWAIT) {
1859 /* Now flag each ring */
1860 for (i = 0; i < psli->num_rings; i++) {
1861 /* If the ring is active, flag it */
1862 if (psli->ring[i].cmdringaddr) {
1863 psli->ring[i].flag |=
1870 psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
1872 /* If we are not polling, we MUST be in SLI2 mode */
1873 if (flag != MBX_POLL) {
1874 if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
1875 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1876 spin_unlock_irqrestore(phba->host->host_lock,
1878 /* Mbox command <mbxCommand> cannot issue */
1879 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag);
1880 return (MBX_NOT_FINISHED);
1882 /* timeout active mbox command */
1883 mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO);
1886 /* Mailbox cmd <cmd> issue */
1887 lpfc_printf_log(phba,
1890 "%d:0309 Mailbox cmd x%x issue Data: x%x x%x x%x\n",
1897 psli->slistat.mbox_cmd++;
1898 evtctr = psli->slistat.mbox_event;
1900 /* next set own bit for the adapter and copy over command word */
1901 mb->mbxOwner = OWN_CHIP;
1903 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
1905 /* First copy command data to host SLIM area */
1906 mbox = (MAILBOX_t *) psli->MBhostaddr;
1907 lpfc_sli_pcimem_bcopy(mb, mbox, MAILBOX_CMD_SIZE);
1909 if (mb->mbxCommand == MBX_CONFIG_PORT) {
1910 /* copy command data into host mbox for cmpl */
1911 mbox = (MAILBOX_t *) psli->MBhostaddr;
1912 lpfc_sli_pcimem_bcopy(mb, mbox, MAILBOX_CMD_SIZE);
1915 /* First copy mbox command data to HBA SLIM, skip past first
1917 to_slim = phba->MBslimaddr + sizeof (uint32_t);
1918 lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0],
1919 MAILBOX_CMD_SIZE - sizeof (uint32_t));
1921 /* Next copy over first word, with mbxOwner set */
1922 ldata = *((volatile uint32_t *)mb);
1923 to_slim = phba->MBslimaddr;
1924 writel(ldata, to_slim);
1925 readl(to_slim); /* flush */
1927 if (mb->mbxCommand == MBX_CONFIG_PORT) {
1928 /* switch over to host mailbox */
1929 psli->sli_flag |= LPFC_SLI2_ACTIVE;
1934 /* interrupt board to doit right away */
1935 writel(CA_MBATT, phba->CAregaddr);
1936 readl(phba->CAregaddr); /* flush */
1940 /* Don't wait for it to finish, just return */
1941 psli->mbox_active = pmbox;
1946 psli->mbox_active = NULL;
1947 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
1948 /* First read mbox status word */
1949 mbox = (MAILBOX_t *) psli->MBhostaddr;
1950 word0 = *((volatile uint32_t *)mbox);
1951 word0 = le32_to_cpu(word0);
1953 /* First read mbox status word */
1954 word0 = readl(phba->MBslimaddr);
1957 /* Read the HBA Host Attention Register */
1958 ha_copy = readl(phba->HAregaddr);
1960 /* Wait for command to complete */
1961 while (((word0 & OWN_CHIP) == OWN_CHIP)
1962 || !(ha_copy & HA_MBATT)) {
1964 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1965 spin_unlock_irqrestore(phba->host->host_lock,
1967 return (MBX_NOT_FINISHED);
1970 /* Check if we took a mbox interrupt while we were
1972 if (((word0 & OWN_CHIP) != OWN_CHIP)
1973 && (evtctr != psli->slistat.mbox_event))
1976 spin_unlock_irqrestore(phba->host->host_lock,
1979 /* Can be in interrupt context, do not sleep */
1980 /* (or might be called with interrupts disabled) */
1983 spin_lock_irqsave(phba->host->host_lock, drvr_flag);
1985 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
1986 /* First copy command data */
1987 mbox = (MAILBOX_t *) psli->MBhostaddr;
1988 word0 = *((volatile uint32_t *)mbox);
1989 word0 = le32_to_cpu(word0);
1990 if (mb->mbxCommand == MBX_CONFIG_PORT) {
1992 volatile uint32_t slimword0;
1993 /* Check real SLIM for any errors */
1994 slimword0 = readl(phba->MBslimaddr);
1995 slimmb = (MAILBOX_t *) & slimword0;
1996 if (((slimword0 & OWN_CHIP) != OWN_CHIP)
1997 && slimmb->mbxStatus) {
2004 /* First copy command data */
2005 word0 = readl(phba->MBslimaddr);
2007 /* Read the HBA Host Attention Register */
2008 ha_copy = readl(phba->HAregaddr);
2011 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2012 /* First copy command data */
2013 mbox = (MAILBOX_t *) psli->MBhostaddr;
2014 /* copy results back to user */
2015 lpfc_sli_pcimem_bcopy(mbox, mb, MAILBOX_CMD_SIZE);
2017 /* First copy command data */
2018 lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
2020 if ((mb->mbxCommand == MBX_DUMP_MEMORY) &&
2022 lpfc_memcpy_from_slim((void *)pmbox->context2,
2023 phba->MBslimaddr + DMP_RSP_OFFSET,
2024 mb->un.varDmp.word_cnt);
2028 writel(HA_MBATT, phba->HAregaddr);
2029 readl(phba->HAregaddr); /* flush */
2031 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2032 status = mb->mbxStatus;
2035 spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2040 lpfc_sli_ringtx_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
2041 struct lpfc_iocbq * piocb)
2043 /* Insert the caller's iocb in the txq tail for later processing. */
2044 list_add_tail(&piocb->list, &pring->txq);
2049 static struct lpfc_iocbq *
2050 lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2051 struct lpfc_iocbq ** piocb)
2053 struct lpfc_iocbq * nextiocb;
2055 nextiocb = lpfc_sli_ringtx_get(phba, pring);
2065 lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2066 struct lpfc_iocbq *piocb, uint32_t flag)
2068 struct lpfc_iocbq *nextiocb;
2072 * We should never get an IOCB if we are in a < LINK_DOWN state
2074 if (unlikely(phba->hba_state < LPFC_LINK_DOWN))
2078 * Check to see if we are blocking IOCB processing because of a
2079 * outstanding mbox command.
2081 if (unlikely(pring->flag & LPFC_STOP_IOCB_MBX))
2084 if (unlikely(phba->hba_state == LPFC_LINK_DOWN)) {
2086 * Only CREATE_XRI, CLOSE_XRI, ABORT_XRI, and QUE_RING_BUF
2087 * can be issued if the link is not up.
2089 switch (piocb->iocb.ulpCommand) {
2090 case CMD_QUE_RING_BUF_CN:
2091 case CMD_QUE_RING_BUF64_CN:
2092 case CMD_CLOSE_XRI_CN:
2093 case CMD_ABORT_XRI_CN:
2095 * For IOCBs, like QUE_RING_BUF, that have no rsp ring
2096 * completion, iocb_cmpl MUST be 0.
2098 if (piocb->iocb_cmpl)
2099 piocb->iocb_cmpl = NULL;
2101 case CMD_CREATE_XRI_CR:
2108 * For FCP commands, we must be in a state where we can process link
2111 } else if (unlikely(pring->ringno == phba->sli.fcp_ring &&
2112 !(phba->sli.sli_flag & LPFC_PROCESS_LA)))
2116 * Check to see if this is a high priority command.
2117 * If so bypass tx queue processing.
2119 if (unlikely((flag & SLI_IOCB_HIGH_PRIORITY) &&
2120 (iocb = lpfc_sli_next_iocb_slot(phba, pring)))) {
2121 lpfc_sli_submit_iocb(phba, pring, iocb, piocb);
2125 while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
2126 (nextiocb = lpfc_sli_next_iocb(phba, pring, &piocb)))
2127 lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
2130 lpfc_sli_update_ring(phba, pring);
2132 lpfc_sli_update_full_ring(phba, pring);
2135 return IOCB_SUCCESS;
2140 pring->stats.iocb_cmd_delay++;
2144 if (!(flag & SLI_IOCB_RET_IOCB)) {
2145 lpfc_sli_ringtx_put(phba, pring, piocb);
2146 return IOCB_SUCCESS;
2153 lpfc_sli_setup(struct lpfc_hba *phba)
2156 struct lpfc_sli *psli = &phba->sli;
2157 struct lpfc_sli_ring *pring;
2159 psli->num_rings = MAX_CONFIGURED_RINGS;
2161 psli->fcp_ring = LPFC_FCP_RING;
2162 psli->next_ring = LPFC_FCP_NEXT_RING;
2163 psli->ip_ring = LPFC_IP_RING;
2165 for (i = 0; i < psli->num_rings; i++) {
2166 pring = &psli->ring[i];
2168 case LPFC_FCP_RING: /* ring 0 - FCP */
2169 /* numCiocb and numRiocb are used in config_port */
2170 pring->numCiocb = SLI2_IOCB_CMD_R0_ENTRIES;
2171 pring->numRiocb = SLI2_IOCB_RSP_R0_ENTRIES;
2172 pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2173 pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2174 pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2175 pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2176 pring->iotag_ctr = 0;
2178 (phba->cfg_hba_queue_depth * 2);
2179 pring->fast_iotag = pring->iotag_max;
2180 pring->num_mask = 0;
2182 case LPFC_IP_RING: /* ring 1 - IP */
2183 /* numCiocb and numRiocb are used in config_port */
2184 pring->numCiocb = SLI2_IOCB_CMD_R1_ENTRIES;
2185 pring->numRiocb = SLI2_IOCB_RSP_R1_ENTRIES;
2186 pring->num_mask = 0;
2188 case LPFC_ELS_RING: /* ring 2 - ELS / CT */
2189 /* numCiocb and numRiocb are used in config_port */
2190 pring->numCiocb = SLI2_IOCB_CMD_R2_ENTRIES;
2191 pring->numRiocb = SLI2_IOCB_RSP_R2_ENTRIES;
2192 pring->fast_iotag = 0;
2193 pring->iotag_ctr = 0;
2194 pring->iotag_max = 4096;
2195 pring->num_mask = 4;
2196 pring->prt[0].profile = 0; /* Mask 0 */
2197 pring->prt[0].rctl = FC_ELS_REQ;
2198 pring->prt[0].type = FC_ELS_DATA;
2199 pring->prt[0].lpfc_sli_rcv_unsol_event =
2200 lpfc_els_unsol_event;
2201 pring->prt[1].profile = 0; /* Mask 1 */
2202 pring->prt[1].rctl = FC_ELS_RSP;
2203 pring->prt[1].type = FC_ELS_DATA;
2204 pring->prt[1].lpfc_sli_rcv_unsol_event =
2205 lpfc_els_unsol_event;
2206 pring->prt[2].profile = 0; /* Mask 2 */
2207 /* NameServer Inquiry */
2208 pring->prt[2].rctl = FC_UNSOL_CTL;
2210 pring->prt[2].type = FC_COMMON_TRANSPORT_ULP;
2211 pring->prt[2].lpfc_sli_rcv_unsol_event =
2212 lpfc_ct_unsol_event;
2213 pring->prt[3].profile = 0; /* Mask 3 */
2214 /* NameServer response */
2215 pring->prt[3].rctl = FC_SOL_CTL;
2217 pring->prt[3].type = FC_COMMON_TRANSPORT_ULP;
2218 pring->prt[3].lpfc_sli_rcv_unsol_event =
2219 lpfc_ct_unsol_event;
2222 totiocb += (pring->numCiocb + pring->numRiocb);
2224 if (totiocb > MAX_SLI2_IOCB) {
2225 /* Too many cmd / rsp ring entries in SLI2 SLIM */
2226 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2227 "%d:0462 Too many cmd / rsp ring entries in "
2228 "SLI2 SLIM Data: x%x x%x\n",
2229 phba->brd_no, totiocb, MAX_SLI2_IOCB);
2236 lpfc_sli_queue_setup(struct lpfc_hba * phba)
2238 struct lpfc_sli *psli;
2239 struct lpfc_sli_ring *pring;
2243 spin_lock_irq(phba->host->host_lock);
2244 INIT_LIST_HEAD(&psli->mboxq);
2245 /* Initialize list headers for txq and txcmplq as double linked lists */
2246 for (i = 0; i < psli->num_rings; i++) {
2247 pring = &psli->ring[i];
2249 pring->next_cmdidx = 0;
2250 pring->local_getidx = 0;
2252 INIT_LIST_HEAD(&pring->txq);
2253 INIT_LIST_HEAD(&pring->txcmplq);
2254 INIT_LIST_HEAD(&pring->iocb_continueq);
2255 INIT_LIST_HEAD(&pring->postbufq);
2256 cnt = pring->fast_iotag;
2257 spin_unlock_irq(phba->host->host_lock);
2259 pring->fast_lookup =
2260 kmalloc(cnt * sizeof (struct lpfc_iocbq *),
2262 if (pring->fast_lookup == 0) {
2265 memset((char *)pring->fast_lookup, 0,
2266 cnt * sizeof (struct lpfc_iocbq *));
2268 spin_lock_irq(phba->host->host_lock);
2270 spin_unlock_irq(phba->host->host_lock);
2275 lpfc_sli_hba_down(struct lpfc_hba * phba)
2277 struct lpfc_sli *psli;
2278 struct lpfc_sli_ring *pring;
2280 struct lpfc_iocbq *iocb, *next_iocb;
2281 IOCB_t *icmd = NULL;
2283 unsigned long flags = 0;
2286 lpfc_hba_down_prep(phba);
2288 spin_lock_irqsave(phba->host->host_lock, flags);
2290 for (i = 0; i < psli->num_rings; i++) {
2291 pring = &psli->ring[i];
2292 pring->flag |= LPFC_DEFERRED_RING_EVENT;
2295 * Error everything on the txq since these iocbs have not been
2296 * given to the FW yet.
2300 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
2301 list_del_init(&iocb->list);
2302 if (iocb->iocb_cmpl) {
2304 icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
2305 icmd->un.ulpWord[4] = IOERR_SLI_DOWN;
2306 spin_unlock_irqrestore(phba->host->host_lock,
2308 (iocb->iocb_cmpl) (phba, iocb, iocb);
2309 spin_lock_irqsave(phba->host->host_lock, flags);
2311 list_add_tail(&iocb->list,
2312 &phba->lpfc_iocb_list);
2316 INIT_LIST_HEAD(&(pring->txq));
2318 if (pring->fast_lookup) {
2319 kfree(pring->fast_lookup);
2320 pring->fast_lookup = NULL;
2325 spin_unlock_irqrestore(phba->host->host_lock, flags);
2327 /* Return any active mbox cmds */
2328 del_timer_sync(&psli->mbox_tmo);
2329 spin_lock_irqsave(phba->host->host_lock, flags);
2330 phba->work_hba_events &= ~WORKER_MBOX_TMO;
2331 if (psli->mbox_active) {
2332 pmb = psli->mbox_active;
2333 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
2334 if (pmb->mbox_cmpl) {
2335 spin_unlock_irqrestore(phba->host->host_lock, flags);
2336 pmb->mbox_cmpl(phba,pmb);
2337 spin_lock_irqsave(phba->host->host_lock, flags);
2340 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2341 psli->mbox_active = NULL;
2343 /* Return any pending mbox cmds */
2344 while ((pmb = lpfc_mbox_get(phba)) != NULL) {
2345 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
2346 if (pmb->mbox_cmpl) {
2347 spin_unlock_irqrestore(phba->host->host_lock, flags);
2348 pmb->mbox_cmpl(phba,pmb);
2349 spin_lock_irqsave(phba->host->host_lock, flags);
2353 INIT_LIST_HEAD(&psli->mboxq);
2355 spin_unlock_irqrestore(phba->host->host_lock, flags);
2358 * Provided the hba is not in an error state, reset it. It is not
2359 * capable of IO anymore.
2361 if (phba->hba_state != LPFC_HBA_ERROR) {
2362 phba->hba_state = LPFC_INIT_START;
2363 lpfc_sli_brdreset(phba, 1);
2370 lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
2372 uint32_t *src = srcp;
2373 uint32_t *dest = destp;
2377 for (i = 0; i < (int)cnt; i += sizeof (uint32_t)) {
2379 ldata = le32_to_cpu(ldata);
2387 lpfc_sli_ringpostbuf_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
2388 struct lpfc_dmabuf * mp)
2390 /* Stick struct lpfc_dmabuf at end of postbufq so driver can look it up
2392 list_add_tail(&mp->list, &pring->postbufq);
2394 pring->postbufq_cnt++;
2399 struct lpfc_dmabuf *
2400 lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2403 struct lpfc_dmabuf *mp, *next_mp;
2404 struct list_head *slp = &pring->postbufq;
2406 /* Search postbufq, from the begining, looking for a match on phys */
2407 list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
2408 if (mp->phys == phys) {
2409 list_del_init(&mp->list);
2410 pring->postbufq_cnt--;
2415 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2416 "%d:0410 Cannot find virtual addr for mapped buf on "
2417 "ring %d Data x%llx x%p x%p x%x\n",
2418 phba->brd_no, pring->ringno, (unsigned long long)phys,
2419 slp->next, slp->prev, pring->postbufq_cnt);
2424 lpfc_sli_abort_elsreq_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
2425 struct lpfc_iocbq * rspiocb)
2427 struct lpfc_dmabuf *buf_ptr, *buf_ptr1;
2428 /* Free the resources associated with the ELS_REQUEST64 IOCB the driver
2430 * In this case, context2 = cmd, context2->next = rsp, context3 = bpl
2432 if (cmdiocb->context2) {
2433 buf_ptr1 = (struct lpfc_dmabuf *) cmdiocb->context2;
2435 /* Free the response IOCB before completing the abort
2438 list_remove_head((&buf_ptr1->list), buf_ptr,
2439 struct lpfc_dmabuf, list);
2441 lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
2444 lpfc_mbuf_free(phba, buf_ptr1->virt, buf_ptr1->phys);
2448 if (cmdiocb->context3) {
2449 buf_ptr = (struct lpfc_dmabuf *) cmdiocb->context3;
2450 lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
2454 list_add_tail(&cmdiocb->list, &phba->lpfc_iocb_list);
2459 lpfc_sli_issue_abort_iotag32(struct lpfc_hba * phba,
2460 struct lpfc_sli_ring * pring,
2461 struct lpfc_iocbq * cmdiocb)
2463 struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
2464 struct lpfc_iocbq *abtsiocbp = NULL;
2465 IOCB_t *icmd = NULL;
2466 IOCB_t *iabt = NULL;
2468 /* issue ABTS for this IOCB based on iotag */
2469 list_remove_head(lpfc_iocb_list, abtsiocbp, struct lpfc_iocbq, list);
2470 if (abtsiocbp == NULL)
2472 memset(abtsiocbp, 0, sizeof (struct lpfc_iocbq));
2474 iabt = &abtsiocbp->iocb;
2475 icmd = &cmdiocb->iocb;
2476 switch (icmd->ulpCommand) {
2477 case CMD_ELS_REQUEST64_CR:
2478 /* Even though we abort the ELS command, the firmware may access
2479 * the BPL or other resources before it processes our
2480 * ABORT_MXRI64. Thus we must delay reusing the cmdiocb
2481 * resources till the actual abort request completes.
2483 abtsiocbp->context1 = (void *)((unsigned long)icmd->ulpCommand);
2484 abtsiocbp->context2 = cmdiocb->context2;
2485 abtsiocbp->context3 = cmdiocb->context3;
2486 cmdiocb->context2 = NULL;
2487 cmdiocb->context3 = NULL;
2488 abtsiocbp->iocb_cmpl = lpfc_sli_abort_elsreq_cmpl;
2491 list_add_tail(&abtsiocbp->list, lpfc_iocb_list);
2495 iabt->un.amxri.abortType = ABORT_TYPE_ABTS;
2496 iabt->un.amxri.iotag32 = icmd->un.elsreq64.bdl.ulpIoTag32;
2499 iabt->ulpClass = CLASS3;
2500 iabt->ulpCommand = CMD_ABORT_MXRI64_CN;
2502 if (lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0) == IOCB_ERROR) {
2503 list_add_tail(&abtsiocbp->list, lpfc_iocb_list);
2511 lpfc_sli_validate_iocb_cmd(struct lpfc_scsi_buf *lpfc_cmd, uint16_t tgt_id,
2512 uint64_t lun_id, struct lpfc_iocbq *iocb,
2513 uint32_t ctx, lpfc_ctx_cmd ctx_cmd)
2517 if (lpfc_cmd == NULL)
2522 if ((lpfc_cmd->pCmd->device->id == tgt_id) &&
2523 (lpfc_cmd->pCmd->device->lun == lun_id))
2527 if (lpfc_cmd->pCmd->device->id == tgt_id)
2531 if (iocb->iocb.ulpContext == ctx)
2537 printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
2538 __FUNCTION__, ctx_cmd);
2546 lpfc_sli_sum_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2547 uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd ctx_cmd)
2549 struct lpfc_iocbq *iocb, *next_iocb;
2551 struct lpfc_scsi_buf *lpfc_cmd;
2552 int sum = 0, ret_val = 0;
2554 /* Next check the txcmplq */
2555 list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
2558 /* Must be a FCP command */
2559 if ((cmd->ulpCommand != CMD_FCP_ICMND64_CR) &&
2560 (cmd->ulpCommand != CMD_FCP_IWRITE64_CR) &&
2561 (cmd->ulpCommand != CMD_FCP_IREAD64_CR)) {
2565 /* context1 MUST be a struct lpfc_scsi_buf */
2566 lpfc_cmd = (struct lpfc_scsi_buf *) (iocb->context1);
2567 ret_val = lpfc_sli_validate_iocb_cmd(lpfc_cmd, tgt_id, lun_id,
2577 lpfc_sli_abort_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2578 uint16_t tgt_id, uint64_t lun_id, uint32_t ctx,
2579 lpfc_ctx_cmd abort_cmd)
2581 struct lpfc_iocbq *iocb, *next_iocb;
2582 struct lpfc_iocbq *abtsiocb = NULL;
2583 struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
2585 struct lpfc_scsi_buf *lpfc_cmd;
2586 int errcnt = 0, ret_val = 0;
2588 list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
2591 /* Must be a FCP command */
2592 if ((cmd->ulpCommand != CMD_FCP_ICMND64_CR) &&
2593 (cmd->ulpCommand != CMD_FCP_IWRITE64_CR) &&
2594 (cmd->ulpCommand != CMD_FCP_IREAD64_CR)) {
2598 /* context1 MUST be a struct lpfc_scsi_buf */
2599 lpfc_cmd = (struct lpfc_scsi_buf *) (iocb->context1);
2600 ret_val = lpfc_sli_validate_iocb_cmd(lpfc_cmd, tgt_id, lun_id,
2601 iocb, ctx, abort_cmd);
2605 /* issue ABTS for this IOCB based on iotag */
2606 list_remove_head(lpfc_iocb_list, abtsiocb, struct lpfc_iocbq,
2608 if (abtsiocb == NULL) {
2612 memset(abtsiocb, 0, sizeof (struct lpfc_iocbq));
2614 abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
2615 abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
2616 abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
2617 abtsiocb->iocb.ulpLe = 1;
2618 abtsiocb->iocb.ulpClass = cmd->ulpClass;
2620 if (phba->hba_state >= LPFC_LINK_UP)
2621 abtsiocb->iocb.ulpCommand = CMD_ABORT_XRI_CN;
2623 abtsiocb->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
2625 ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
2626 if (ret_val == IOCB_ERROR) {
2627 list_add_tail(&abtsiocb->list, lpfc_iocb_list);
2637 lpfc_sli_wake_iocb_high_priority(struct lpfc_hba * phba,
2638 struct lpfc_iocbq * queue1,
2639 struct lpfc_iocbq * queue2)
2641 if (queue1->context2 && queue2)
2642 memcpy(queue1->context2, queue2, sizeof (struct lpfc_iocbq));
2644 /* The waiter is looking for LPFC_IO_HIPRI bit to be set
2645 as a signal to wake up */
2646 queue1->iocb_flag |= LPFC_IO_HIPRI;
2651 lpfc_sli_issue_iocb_wait_high_priority(struct lpfc_hba * phba,
2652 struct lpfc_sli_ring * pring,
2653 struct lpfc_iocbq * piocb,
2655 struct lpfc_iocbq * prspiocbq,
2658 int j, delay_time, retval = IOCB_ERROR;
2660 /* The caller must left context1 empty. */
2661 if (piocb->context_un.hipri_wait_queue != 0) {
2666 * If the caller has provided a response iocbq buffer, context2 must
2667 * be NULL or its an error.
2669 if (prspiocbq && piocb->context2) {
2673 piocb->context2 = prspiocbq;
2675 /* Setup callback routine and issue the command. */
2676 piocb->iocb_cmpl = lpfc_sli_wake_iocb_high_priority;
2677 retval = lpfc_sli_issue_iocb(phba, pring, piocb,
2678 flag | SLI_IOCB_HIGH_PRIORITY);
2679 if (retval != IOCB_SUCCESS) {
2680 piocb->context2 = NULL;
2685 * This high-priority iocb was sent out-of-band. Poll for its
2686 * completion rather than wait for a signal. Note that the host_lock
2687 * is held by the midlayer and must be released here to allow the
2688 * interrupt handlers to complete the IO and signal this routine via
2690 * Also, the delay_time is computed to be one second longer than
2691 * the scsi command timeout to give the FW time to abort on
2692 * timeout rather than the driver just giving up. Typically,
2693 * the midlayer does not specify a time for this command so the
2694 * driver is free to enforce its own timeout.
2697 delay_time = ((timeout + 1) * 1000) >> 6;
2698 retval = IOCB_ERROR;
2699 spin_unlock_irq(phba->host->host_lock);
2700 for (j = 0; j < 64; j++) {
2702 if (piocb->iocb_flag & LPFC_IO_HIPRI) {
2703 piocb->iocb_flag &= ~LPFC_IO_HIPRI;
2704 retval = IOCB_SUCCESS;
2709 spin_lock_irq(phba->host->host_lock);
2710 piocb->context2 = NULL;
2714 lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq,
2717 DECLARE_WAIT_QUEUE_HEAD(done_q);
2718 DECLARE_WAITQUEUE(wq_entry, current);
2719 uint32_t timeleft = 0;
2722 /* The caller must leave context1 empty. */
2723 if (pmboxq->context1 != 0) {
2724 return (MBX_NOT_FINISHED);
2727 /* setup wake call as IOCB callback */
2728 pmboxq->mbox_cmpl = lpfc_sli_wake_mbox_wait;
2729 /* setup context field to pass wait_queue pointer to wake function */
2730 pmboxq->context1 = &done_q;
2732 /* start to sleep before we wait, to avoid races */
2733 set_current_state(TASK_INTERRUPTIBLE);
2734 add_wait_queue(&done_q, &wq_entry);
2736 /* now issue the command */
2737 retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
2739 if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
2740 timeleft = schedule_timeout(timeout * HZ);
2741 pmboxq->context1 = NULL;
2742 /* if schedule_timeout returns 0, we timed out and were not
2744 if (timeleft == 0) {
2745 retval = MBX_TIMEOUT;
2747 retval = MBX_SUCCESS;
2752 set_current_state(TASK_RUNNING);
2753 remove_wait_queue(&done_q, &wq_entry);
2758 lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs)
2760 struct lpfc_hba *phba;
2762 uint32_t work_ha_copy;
2763 unsigned long status;
2768 * Get the driver's phba structure from the dev_id and
2769 * assume the HBA is not interrupting.
2771 phba = (struct lpfc_hba *) dev_id;
2773 if (unlikely(!phba))
2776 phba->sli.slistat.sli_intr++;
2779 * Call the HBA to see if it is interrupting. If not, don't claim
2783 /* Ignore all interrupts during initialization. */
2784 if (unlikely(phba->hba_state < LPFC_LINK_DOWN))
2788 * Read host attention register to determine interrupt source
2789 * Clear Attention Sources, except Error Attention (to
2790 * preserve status) and Link Attention
2792 spin_lock(phba->host->host_lock);
2793 ha_copy = readl(phba->HAregaddr);
2794 writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
2795 readl(phba->HAregaddr); /* flush */
2796 spin_unlock(phba->host->host_lock);
2798 if (unlikely(!ha_copy))
2801 work_ha_copy = ha_copy & phba->work_ha_mask;
2803 if (unlikely(work_ha_copy)) {
2804 if (work_ha_copy & HA_LATT) {
2805 if (phba->sli.sli_flag & LPFC_PROCESS_LA) {
2807 * Turn off Link Attention interrupts
2808 * until CLEAR_LA done
2810 spin_lock(phba->host->host_lock);
2811 phba->sli.sli_flag &= ~LPFC_PROCESS_LA;
2812 control = readl(phba->HCregaddr);
2813 control &= ~HC_LAINT_ENA;
2814 writel(control, phba->HCregaddr);
2815 readl(phba->HCregaddr); /* flush */
2816 spin_unlock(phba->host->host_lock);
2819 work_ha_copy &= ~HA_LATT;
2822 if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) {
2823 for (i = 0; i < phba->sli.num_rings; i++) {
2824 if (work_ha_copy & (HA_RXATT << (4*i))) {
2826 * Turn off Slow Rings interrupts
2828 spin_lock(phba->host->host_lock);
2829 control = readl(phba->HCregaddr);
2830 control &= ~(HC_R0INT_ENA << i);
2831 writel(control, phba->HCregaddr);
2832 readl(phba->HCregaddr); /* flush */
2833 spin_unlock(phba->host->host_lock);
2838 if (work_ha_copy & HA_ERATT) {
2839 phba->hba_state = LPFC_HBA_ERROR;
2841 * There was a link/board error. Read the
2842 * status register to retrieve the error event
2845 phba->sli.slistat.err_attn_event++;
2846 /* Save status info */
2847 phba->work_hs = readl(phba->HSregaddr);
2848 phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
2849 phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
2851 /* Clear Chip error bit */
2852 writel(HA_ERATT, phba->HAregaddr);
2853 readl(phba->HAregaddr); /* flush */
2856 * Reseting the HBA is the only reliable way
2857 * to shutdown interrupt when there is a
2860 lpfc_sli_send_reset(phba, phba->hba_state);
2863 spin_lock(phba->host->host_lock);
2864 phba->work_ha |= work_ha_copy;
2865 if (phba->work_wait)
2866 wake_up(phba->work_wait);
2867 spin_unlock(phba->host->host_lock);
2870 ha_copy &= ~(phba->work_ha_mask);
2873 * Process all events on FCP ring. Take the optimized path for
2874 * FCP IO. Any other IO is slow path and is handled by
2875 * the worker thread.
2877 status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING)));
2878 status >>= (4*LPFC_FCP_RING);
2879 if (status & HA_RXATT)
2880 lpfc_sli_handle_fast_ring_event(phba,
2881 &phba->sli.ring[LPFC_FCP_RING],
2885 } /* lpfc_intr_handler */