64edac8ccce1d57570f82eb3e072d67a8d407c0e
[pandora-kernel.git] / drivers / scsi / isci / host.h
1 /*
2  * This file is provided under a dual BSD/GPLv2 license.  When using or
3  * redistributing this file, you may do so under either license.
4  *
5  * GPL LICENSE SUMMARY
6  *
7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of version 2 of the GNU General Public License as
11  * published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21  * The full GNU General Public License is included in this distribution
22  * in the file called LICENSE.GPL.
23  *
24  * BSD LICENSE
25  *
26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27  * All rights reserved.
28  *
29  * Redistribution and use in source and binary forms, with or without
30  * modification, are permitted provided that the following conditions
31  * are met:
32  *
33  *   * Redistributions of source code must retain the above copyright
34  *     notice, this list of conditions and the following disclaimer.
35  *   * Redistributions in binary form must reproduce the above copyright
36  *     notice, this list of conditions and the following disclaimer in
37  *     the documentation and/or other materials provided with the
38  *     distribution.
39  *   * Neither the name of Intel Corporation nor the names of its
40  *     contributors may be used to endorse or promote products derived
41  *     from this software without specific prior written permission.
42  *
43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54  */
55 #ifndef _SCI_HOST_H_
56 #define _SCI_HOST_H_
57
58 #include "scic_config_parameters.h"
59 #include "remote_device.h"
60 #include "phy.h"
61 #include "pool.h"
62 #include "sci_base_state_machine.h"
63 #include "remote_node_table.h"
64 #include "registers.h"
65 #include "scu_unsolicited_frame.h"
66 #include "unsolicited_frame_control.h"
67 #include "scic_sds_port_configuration_agent.h"
68
69 struct scic_sds_request;
70 struct scu_task_context;
71
72 /**
73  * struct scic_power_control -
74  *
75  * This structure defines the fields for managing power control for direct
76  * attached disk devices.
77  */
78 struct scic_power_control {
79         /**
80          * This field is set when the power control timer is running and cleared when
81          * it is not.
82          */
83         bool timer_started;
84
85         /**
86          * This field is the handle to the driver timer object.  This timer is used to
87          * control when the directed attached disks can consume power.
88          */
89         void *timer;
90
91         /**
92          * This field is used to keep track of how many phys are put into the
93          * requesters field.
94          */
95         u8 phys_waiting;
96
97         /**
98          * This field is used to keep track of how many phys have been granted to consume power
99          */
100         u8 phys_granted_power;
101
102         /**
103          * This field is an array of phys that we are waiting on. The phys are direct
104          * mapped into requesters via struct scic_sds_phy.phy_index
105          */
106         struct scic_sds_phy *requesters[SCI_MAX_PHYS];
107
108 };
109
110 /**
111  * struct scic_sds_controller -
112  *
113  * This structure represents the SCU controller object.
114  */
115 struct scic_sds_controller {
116         /**
117          * This field contains the information for the base controller state
118          * machine.
119          */
120         struct sci_base_state_machine state_machine;
121
122         /**
123          * This field is the driver timer object handler used to time the controller
124          * object start and stop requests.
125          */
126         void *timeout_timer;
127
128         /**
129          * This field contains the user parameters to be utilized for this
130          * core controller object.
131          */
132         union scic_user_parameters user_parameters;
133
134         /**
135          * This field contains the OEM parameters to be utilized for this
136          * core controller object.
137          */
138         union scic_oem_parameters oem_parameters;
139
140         /**
141          * This field contains the port configuration agent for this controller.
142          */
143         struct scic_sds_port_configuration_agent port_agent;
144
145         /**
146          * This field is the array of device objects that are currently constructed
147          * for this controller object.  This table is used as a fast lookup of device
148          * objects that need to handle device completion notifications from the
149          * hardware. The table is RNi based.
150          */
151         struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES];
152
153         /**
154          * This field is the array of IO request objects that are currently active for
155          * this controller object.  This table is used as a fast lookup of the io
156          * request object that need to handle completion queue notifications.  The
157          * table is TCi based.
158          */
159         struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS];
160
161         /**
162          * This field is the free RNi data structure
163          */
164         struct scic_remote_node_table available_remote_nodes;
165
166         /**
167          * This field is the TCi pool used to manage the task context index.
168          */
169         SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS);
170
171         /**
172          * This filed is the struct scic_power_control data used to controll when direct
173          * attached devices can consume power.
174          */
175         struct scic_power_control power_control;
176
177         /**
178          * This field is the array of sequence values for the IO Tag fields.  Even
179          * though only 4 bits of the field is used for the sequence the sequence is 16
180          * bits in size so the sequence can be bitwise or'd with the TCi to build the
181          * IO Tag value.
182          */
183         u16 io_request_sequence[SCI_MAX_IO_REQUESTS];
184
185         /**
186          * This field in the array of sequence values for the RNi.  These are used
187          * to control io request build to io request start operations.  The sequence
188          * value is recorded into an io request when it is built and is checked on
189          * the io request start operation to make sure that there was not a device
190          * hot plug between the build and start operation.
191          */
192         u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES];
193
194         /**
195          * This field is a pointer to the memory allocated by the driver for the task
196          * context table.  This data is shared between the hardware and software.
197          */
198         struct scu_task_context *task_context_table;
199
200         /**
201          * This field is a pointer to the memory allocated by the driver for the
202          * remote node context table.  This table is shared between the hardware and
203          * software.
204          */
205         union scu_remote_node_context *remote_node_context_table;
206
207         /**
208          * This field is a pointer to the completion queue.  This memory is
209          * written to by the hardware and read by the software.
210          */
211         u32 *completion_queue;
212
213         /**
214          * This field is the software copy of the completion queue get pointer.  The
215          * controller object writes this value to the hardware after processing the
216          * completion entries.
217          */
218         u32 completion_queue_get;
219
220         /**
221          * This field is the minimum of the number of hardware supported port entries
222          * and the software requested port entries.
223          */
224         u32 logical_port_entries;
225
226         /**
227          * This field is the minimum number of hardware supported completion queue
228          * entries and the software requested completion queue entries.
229          */
230         u32 completion_queue_entries;
231
232         /**
233          * This field is the minimum number of hardware supported event entries and
234          * the software requested event entries.
235          */
236         u32 completion_event_entries;
237
238         /**
239          * This field is the minimum number of devices supported by the hardware and
240          * the number of devices requested by the software.
241          */
242         u32 remote_node_entries;
243
244         /**
245          * This field is the minimum number of IO requests supported by the hardware
246          * and the number of IO requests requested by the software.
247          */
248         u32 task_context_entries;
249
250         /**
251          * This object contains all of the unsolicited frame specific
252          * data utilized by the core controller.
253          */
254         struct scic_sds_unsolicited_frame_control uf_control;
255
256         /* Phy Startup Data */
257         /**
258          * This field is the driver timer handle for controller phy request startup.
259          * On controller start the controller will start each PHY individually in
260          * order of phy index.
261          */
262         void *phy_startup_timer;
263
264         /**
265          * This field is set when the phy_startup_timer is running and is cleared when
266          * the phy_startup_timer is stopped.
267          */
268         bool phy_startup_timer_pending;
269
270         /**
271          * This field is the index of the next phy start.  It is initialized to 0 and
272          * increments for each phy index that is started.
273          */
274         u32 next_phy_to_start;
275
276         /**
277          * This field controlls the invalid link up notifications to the SCI_USER.  If
278          * an invalid_link_up notification is reported a bit for the PHY index is set
279          * so further notifications are not made.  Once the PHY object reports link up
280          * and is made part of a port then this bit for the PHY index is cleared.
281          */
282         u8 invalid_phy_mask;
283
284         /*
285          * This field saves the current interrupt coalescing number of the controller.
286          */
287         u16 interrupt_coalesce_number;
288
289         /*
290          * This field saves the current interrupt coalescing timeout value in microseconds.
291          */
292         u32 interrupt_coalesce_timeout;
293
294         /**
295          * This field is a pointer to the memory mapped register space for the
296          * struct smu_registers.
297          */
298         struct smu_registers __iomem *smu_registers;
299
300         /**
301          * This field is a pointer to the memory mapped register space for the
302          * struct scu_registers.
303          */
304         struct scu_registers __iomem *scu_registers;
305
306 };
307
308 struct isci_host {
309         struct scic_sds_controller sci;
310         union scic_oem_parameters oem_parameters;
311
312         int id; /* unique within a given pci device */
313         struct list_head timers;
314         void *core_ctrl_memory;
315         struct dma_pool *dma_pool;
316         struct isci_phy phys[SCI_MAX_PHYS];
317         struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */
318         struct sas_ha_struct sas_ha;
319
320         int can_queue;
321         spinlock_t queue_lock;
322         spinlock_t state_lock;
323
324         struct pci_dev *pdev;
325
326         enum isci_status status;
327         #define IHOST_START_PENDING 0
328         #define IHOST_STOP_PENDING 1
329         unsigned long flags;
330         wait_queue_head_t eventq;
331         struct Scsi_Host *shost;
332         struct tasklet_struct completion_tasklet;
333         struct list_head requests_to_complete;
334         struct list_head requests_to_errorback;
335         spinlock_t scic_lock;
336
337         struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES];
338 };
339
340 /**
341  * enum scic_sds_controller_states - This enumeration depicts all the states
342  *    for the common controller state machine.
343  */
344 enum scic_sds_controller_states {
345         /**
346          * Simply the initial state for the base controller state machine.
347          */
348         SCI_BASE_CONTROLLER_STATE_INITIAL = 0,
349
350         /**
351          * This state indicates that the controller is reset.  The memory for
352          * the controller is in it's initial state, but the controller requires
353          * initialization.
354          * This state is entered from the INITIAL state.
355          * This state is entered from the RESETTING state.
356          */
357         SCI_BASE_CONTROLLER_STATE_RESET,
358
359         /**
360          * This state is typically an action state that indicates the controller
361          * is in the process of initialization.  In this state no new IO operations
362          * are permitted.
363          * This state is entered from the RESET state.
364          */
365         SCI_BASE_CONTROLLER_STATE_INITIALIZING,
366
367         /**
368          * This state indicates that the controller has been successfully
369          * initialized.  In this state no new IO operations are permitted.
370          * This state is entered from the INITIALIZING state.
371          */
372         SCI_BASE_CONTROLLER_STATE_INITIALIZED,
373
374         /**
375          * This state indicates the the controller is in the process of becoming
376          * ready (i.e. starting).  In this state no new IO operations are permitted.
377          * This state is entered from the INITIALIZED state.
378          */
379         SCI_BASE_CONTROLLER_STATE_STARTING,
380
381         /**
382          * This state indicates the controller is now ready.  Thus, the user
383          * is able to perform IO operations on the controller.
384          * This state is entered from the STARTING state.
385          */
386         SCI_BASE_CONTROLLER_STATE_READY,
387
388         /**
389          * This state is typically an action state that indicates the controller
390          * is in the process of resetting.  Thus, the user is unable to perform
391          * IO operations on the controller.  A reset is considered destructive in
392          * most cases.
393          * This state is entered from the READY state.
394          * This state is entered from the FAILED state.
395          * This state is entered from the STOPPED state.
396          */
397         SCI_BASE_CONTROLLER_STATE_RESETTING,
398
399         /**
400          * This state indicates that the controller is in the process of stopping.
401          * In this state no new IO operations are permitted, but existing IO
402          * operations are allowed to complete.
403          * This state is entered from the READY state.
404          */
405         SCI_BASE_CONTROLLER_STATE_STOPPING,
406
407         /**
408          * This state indicates that the controller has successfully been stopped.
409          * In this state no new IO operations are permitted.
410          * This state is entered from the STOPPING state.
411          */
412         SCI_BASE_CONTROLLER_STATE_STOPPED,
413
414         /**
415          * This state indicates that the controller could not successfully be
416          * initialized.  In this state no new IO operations are permitted.
417          * This state is entered from the INITIALIZING state.
418          * This state is entered from the STARTING state.
419          * This state is entered from the STOPPING state.
420          * This state is entered from the RESETTING state.
421          */
422         SCI_BASE_CONTROLLER_STATE_FAILED,
423
424         SCI_BASE_CONTROLLER_MAX_STATES
425
426 };
427
428
429
430 /**
431  * struct isci_pci_info - This class represents the pci function containing the
432  *    controllers. Depending on PCI SKU, there could be up to 2 controllers in
433  *    the PCI function.
434  */
435 #define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS)
436
437 struct isci_pci_info {
438         struct msix_entry msix_entries[SCI_MAX_MSIX_INT];
439         struct isci_host *hosts[SCI_MAX_CONTROLLERS];
440         struct isci_orom *orom;
441 };
442
443 static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev)
444 {
445         return pci_get_drvdata(pdev);
446 }
447
448 #define for_each_isci_host(id, ihost, pdev) \
449         for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \
450              id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \
451              ihost = to_pci_info(pdev)->hosts[++id])
452
453 static inline enum isci_status isci_host_get_state(struct isci_host *isci_host)
454 {
455         return isci_host->status;
456 }
457
458 static inline void isci_host_change_state(struct isci_host *isci_host,
459                                           enum isci_status status)
460 {
461         unsigned long flags;
462
463         dev_dbg(&isci_host->pdev->dev,
464                 "%s: isci_host = %p, state = 0x%x",
465                 __func__,
466                 isci_host,
467                 status);
468         spin_lock_irqsave(&isci_host->state_lock, flags);
469         isci_host->status = status;
470         spin_unlock_irqrestore(&isci_host->state_lock, flags);
471
472 }
473
474 static inline int isci_host_can_queue(struct isci_host *isci_host, int num)
475 {
476         int ret = 0;
477         unsigned long flags;
478
479         spin_lock_irqsave(&isci_host->queue_lock, flags);
480         if ((isci_host->can_queue - num) < 0) {
481                 dev_dbg(&isci_host->pdev->dev,
482                         "%s: isci_host->can_queue = %d\n",
483                         __func__,
484                         isci_host->can_queue);
485                 ret = -SAS_QUEUE_FULL;
486
487         } else
488                 isci_host->can_queue -= num;
489
490         spin_unlock_irqrestore(&isci_host->queue_lock, flags);
491
492         return ret;
493 }
494
495 static inline void isci_host_can_dequeue(struct isci_host *isci_host, int num)
496 {
497         unsigned long flags;
498
499         spin_lock_irqsave(&isci_host->queue_lock, flags);
500         isci_host->can_queue += num;
501         spin_unlock_irqrestore(&isci_host->queue_lock, flags);
502 }
503
504 static inline void wait_for_start(struct isci_host *ihost)
505 {
506         wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags));
507 }
508
509 static inline void wait_for_stop(struct isci_host *ihost)
510 {
511         wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags));
512 }
513
514 static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev)
515 {
516         wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags));
517 }
518
519 static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev)
520 {
521         wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags));
522 }
523
524 static inline struct isci_host *dev_to_ihost(struct domain_device *dev)
525 {
526         return dev->port->ha->lldd_ha;
527 }
528
529 static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic)
530 {
531         /* XXX delete after merging scic_sds_contoller and isci_host */
532         struct isci_host *ihost = container_of(scic, typeof(*ihost), sci);
533
534         return ihost;
535 }
536
537 /**
538  * INCREMENT_QUEUE_GET() -
539  *
540  * This macro will increment the specified index to and if the index wraps to 0
541  * it will toggel the cycle bit.
542  */
543 #define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \
544         { \
545                 if ((index) + 1 == entry_count) {       \
546                         (index) = 0; \
547                         (cycle) = (cycle) ^ (bit_toggle); \
548                 } else { \
549                         index = index + 1; \
550                 } \
551         }
552
553 /**
554  * scic_sds_controller_get_port_configuration_agent() -
555  *
556  * This is a helper macro to get the port configuration agent from the
557  * controller object.
558  */
559 #define scic_sds_controller_get_port_configuration_agent(controller) \
560         (&(controller)->port_agent)
561
562 /**
563  * scic_sds_controller_get_protocol_engine_group() -
564  *
565  * This macro returns the protocol engine group for this controller object.
566  * Presently we only support protocol engine group 0 so just return that
567  */
568 #define scic_sds_controller_get_protocol_engine_group(controller) 0
569
570 /**
571  * scic_sds_io_tag_construct() -
572  *
573  * This macro constructs an IO tag from the sequence and index values.
574  */
575 #define scic_sds_io_tag_construct(sequence, task_index) \
576         ((sequence) << 12 | (task_index))
577
578 /**
579  * scic_sds_io_tag_get_sequence() -
580  *
581  * This macro returns the IO sequence from the IO tag value.
582  */
583 #define scic_sds_io_tag_get_sequence(io_tag) \
584         (((io_tag) & 0xF000) >> 12)
585
586 /**
587  * scic_sds_io_tag_get_index() -
588  *
589  * This macro returns the TCi from the io tag value
590  */
591 #define scic_sds_io_tag_get_index(io_tag) \
592         ((io_tag) & 0x0FFF)
593
594 /**
595  * scic_sds_io_sequence_increment() -
596  *
597  * This is a helper macro to increment the io sequence count. We may find in
598  * the future that it will be faster to store the sequence count in such a way
599  * as we dont perform the shift operation to build io tag values so therefore
600  * need a way to incrment them correctly
601  */
602 #define scic_sds_io_sequence_increment(value) \
603         ((value) = (((value) + 1) & 0x000F))
604
605 /* expander attached sata devices require 3 rnc slots */
606 static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev)
607 {
608         struct domain_device *dev = sci_dev_to_domain(sci_dev);
609
610         if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
611             !sci_dev->is_direct_attached)
612                 return SCU_STP_REMOTE_NODE_COUNT;
613         return SCU_SSP_REMOTE_NODE_COUNT;
614 }
615
616 /**
617  * scic_sds_controller_set_invalid_phy() -
618  *
619  * This macro will set the bit in the invalid phy mask for this controller
620  * object.  This is used to control messages reported for invalid link up
621  * notifications.
622  */
623 #define scic_sds_controller_set_invalid_phy(controller, phy) \
624         ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index))
625
626 /**
627  * scic_sds_controller_clear_invalid_phy() -
628  *
629  * This macro will clear the bit in the invalid phy mask for this controller
630  * object.  This is used to control messages reported for invalid link up
631  * notifications.
632  */
633 #define scic_sds_controller_clear_invalid_phy(controller, phy) \
634         ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
635
636 static inline struct device *scic_to_dev(struct scic_sds_controller *scic)
637 {
638         return &scic_to_ihost(scic)->pdev->dev;
639 }
640
641 static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy)
642 {
643         struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
644
645         if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host)
646                 return NULL;
647
648         return &iphy->isci_port->isci_host->pdev->dev;
649 }
650
651 static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port)
652 {
653         struct isci_port *iport = sci_port_to_iport(sci_port);
654
655         if (!iport || !iport->isci_host)
656                 return NULL;
657
658         return &iport->isci_host->pdev->dev;
659 }
660
661 static inline struct device *scirdev_to_dev(struct scic_sds_remote_device *sci_dev)
662 {
663         struct isci_remote_device *idev =
664                         container_of(sci_dev, typeof(*idev), sci);
665
666         if (!idev || !idev->isci_port || !idev->isci_port->isci_host)
667                 return NULL;
668
669         return &idev->isci_port->isci_host->pdev->dev;
670 }
671
672 enum {
673         ISCI_SI_REVA0,
674         ISCI_SI_REVA2,
675         ISCI_SI_REVB0,
676 };
677
678 extern int isci_si_rev;
679
680 static inline bool is_a0(void)
681 {
682         return isci_si_rev == ISCI_SI_REVA0;
683 }
684
685 static inline bool is_a2(void)
686 {
687         return isci_si_rev == ISCI_SI_REVA2;
688 }
689
690 static inline bool is_b0(void)
691 {
692         return isci_si_rev > ISCI_SI_REVA2;
693 }
694
695 void scic_sds_controller_post_request(struct scic_sds_controller *scic,
696                                       u32 request);
697 void scic_sds_controller_release_frame(struct scic_sds_controller *scic,
698                                        u32 frame_index);
699 void scic_sds_controller_copy_sata_response(void *response_buffer,
700                                             void *frame_header,
701                                             void *frame_buffer);
702 enum sci_status scic_sds_controller_allocate_remote_node_context(struct scic_sds_controller *scic,
703                                                                  struct scic_sds_remote_device *sci_dev,
704                                                                  u16 *node_id);
705 void scic_sds_controller_free_remote_node_context(
706         struct scic_sds_controller *scic,
707         struct scic_sds_remote_device *sci_dev,
708         u16 node_id);
709 union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer(
710         struct scic_sds_controller *scic,
711         u16 node_id);
712
713 struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic,
714                                              u16 io_tag);
715
716 struct scu_task_context *scic_sds_controller_get_task_context_buffer(
717         struct scic_sds_controller *scic,
718         u16 io_tag);
719
720 void scic_sds_controller_power_control_queue_insert(
721         struct scic_sds_controller *scic,
722         struct scic_sds_phy *sci_phy);
723
724 void scic_sds_controller_power_control_queue_remove(
725         struct scic_sds_controller *scic,
726         struct scic_sds_phy *sci_phy);
727
728 void scic_sds_controller_link_up(
729         struct scic_sds_controller *scic,
730         struct scic_sds_port *sci_port,
731         struct scic_sds_phy *sci_phy);
732
733 void scic_sds_controller_link_down(
734         struct scic_sds_controller *scic,
735         struct scic_sds_port *sci_port,
736         struct scic_sds_phy *sci_phy);
737
738 void scic_sds_controller_remote_device_stopped(
739         struct scic_sds_controller *scic,
740         struct scic_sds_remote_device *sci_dev);
741
742 void scic_sds_controller_copy_task_context(
743         struct scic_sds_controller *scic,
744         struct scic_sds_request *this_request);
745
746 void scic_sds_controller_register_setup(struct scic_sds_controller *scic);
747
748 enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req);
749 int isci_host_scan_finished(struct Scsi_Host *, unsigned long);
750 void isci_host_scan_start(struct Scsi_Host *);
751
752 int isci_host_init(struct isci_host *);
753
754 void isci_host_init_controller_names(
755         struct isci_host *isci_host,
756         unsigned int controller_idx);
757
758 void isci_host_deinit(
759         struct isci_host *);
760
761 void isci_host_port_link_up(
762         struct isci_host *,
763         struct scic_sds_port *,
764         struct scic_sds_phy *);
765 int isci_host_dev_found(struct domain_device *);
766
767 void isci_host_remote_device_start_complete(
768         struct isci_host *,
769         struct isci_remote_device *,
770         enum sci_status);
771
772 void scic_controller_disable_interrupts(
773         struct scic_sds_controller *scic);
774
775 enum sci_status scic_controller_start_io(
776         struct scic_sds_controller *scic,
777         struct scic_sds_remote_device *remote_device,
778         struct scic_sds_request *io_request,
779         u16 io_tag);
780
781 enum sci_task_status scic_controller_start_task(
782         struct scic_sds_controller *scic,
783         struct scic_sds_remote_device *remote_device,
784         struct scic_sds_request *task_request,
785         u16 io_tag);
786
787 enum sci_status scic_controller_terminate_request(
788         struct scic_sds_controller *scic,
789         struct scic_sds_remote_device *remote_device,
790         struct scic_sds_request *request);
791
792 enum sci_status scic_controller_complete_io(
793         struct scic_sds_controller *scic,
794         struct scic_sds_remote_device *remote_device,
795         struct scic_sds_request *io_request);
796
797 u16 scic_controller_allocate_io_tag(
798         struct scic_sds_controller *scic);
799
800 enum sci_status scic_controller_free_io_tag(
801         struct scic_sds_controller *scic,
802         u16 io_tag);
803 #endif