drivers/scsi/aacraid/aachba.c

   1 /*
   2  *      Adaptec AAC series RAID controller driver
   3  *      (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
   4  *
   5  * based on the old aacraid driver that is..
   6  * Adaptec aacraid device driver for Linux.
   7  *
   8  * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2, or (at your option)
  13  * any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; see the file COPYING.  If not, write to
  22  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  23  *
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/init.h>
  28 #include <linux/types.h>
  29 #include <linux/pci.h>
  30 #include <linux/spinlock.h>
  31 #include <linux/slab.h>
  32 #include <linux/completion.h>
  33 #include <linux/blkdev.h>
  34 #include <linux/dma-mapping.h>
  35 #include <asm/semaphore.h>
  36 #include <asm/uaccess.h>
  37
  38 #include <scsi/scsi.h>
  39 #include <scsi/scsi_cmnd.h>
  40 #include <scsi/scsi_device.h>
  41 #include <scsi/scsi_host.h>
  42
  43 #include "aacraid.h"
  44
  45 /* values for inqd_pdt: Peripheral device type in plain English */
  46 #define INQD_PDT_DA     0x00    /* Direct-access (DISK) device */
  47 #define INQD_PDT_PROC   0x03    /* Processor device */
  48 #define INQD_PDT_CHNGR  0x08    /* Changer (jukebox, scsi2) */
  49 #define INQD_PDT_COMM   0x09    /* Communication device (scsi2) */
  50 #define INQD_PDT_NOLUN2 0x1f    /* Unknown Device (scsi2) */
  51 #define INQD_PDT_NOLUN  0x7f    /* Logical Unit Not Present */
  52
  53 #define INQD_PDT_DMASK  0x1F    /* Peripheral Device Type Mask */
  54 #define INQD_PDT_QMASK  0xE0    /* Peripheral Device Qualifer Mask */
  55
  56 /*
  57  *      Sense codes
  58  */
  59
  60 #define SENCODE_NO_SENSE                        0x00
  61 #define SENCODE_END_OF_DATA                     0x00
  62 #define SENCODE_BECOMING_READY                  0x04
  63 #define SENCODE_INIT_CMD_REQUIRED               0x04
  64 #define SENCODE_PARAM_LIST_LENGTH_ERROR         0x1A
  65 #define SENCODE_INVALID_COMMAND                 0x20
  66 #define SENCODE_LBA_OUT_OF_RANGE                0x21
  67 #define SENCODE_INVALID_CDB_FIELD               0x24
  68 #define SENCODE_LUN_NOT_SUPPORTED               0x25
  69 #define SENCODE_INVALID_PARAM_FIELD             0x26
  70 #define SENCODE_PARAM_NOT_SUPPORTED             0x26
  71 #define SENCODE_PARAM_VALUE_INVALID             0x26
  72 #define SENCODE_RESET_OCCURRED                  0x29
  73 #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET     0x3E
  74 #define SENCODE_INQUIRY_DATA_CHANGED            0x3F
  75 #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED     0x39
  76 #define SENCODE_DIAGNOSTIC_FAILURE              0x40
  77 #define SENCODE_INTERNAL_TARGET_FAILURE         0x44
  78 #define SENCODE_INVALID_MESSAGE_ERROR           0x49
  79 #define SENCODE_LUN_FAILED_SELF_CONFIG          0x4c
  80 #define SENCODE_OVERLAPPED_COMMAND              0x4E
  81
  82 /*
  83  *      Additional sense codes
  84  */
  85
  86 #define ASENCODE_NO_SENSE                       0x00
  87 #define ASENCODE_END_OF_DATA                    0x05
  88 #define ASENCODE_BECOMING_READY                 0x01
  89 #define ASENCODE_INIT_CMD_REQUIRED              0x02
  90 #define ASENCODE_PARAM_LIST_LENGTH_ERROR        0x00
  91 #define ASENCODE_INVALID_COMMAND                0x00
  92 #define ASENCODE_LBA_OUT_OF_RANGE               0x00
  93 #define ASENCODE_INVALID_CDB_FIELD              0x00
  94 #define ASENCODE_LUN_NOT_SUPPORTED              0x00
  95 #define ASENCODE_INVALID_PARAM_FIELD            0x00
  96 #define ASENCODE_PARAM_NOT_SUPPORTED            0x01
  97 #define ASENCODE_PARAM_VALUE_INVALID            0x02
  98 #define ASENCODE_RESET_OCCURRED                 0x00
  99 #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET    0x00
 100 #define ASENCODE_INQUIRY_DATA_CHANGED           0x03
 101 #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED    0x00
 102 #define ASENCODE_DIAGNOSTIC_FAILURE             0x80
 103 #define ASENCODE_INTERNAL_TARGET_FAILURE        0x00
 104 #define ASENCODE_INVALID_MESSAGE_ERROR          0x00
 105 #define ASENCODE_LUN_FAILED_SELF_CONFIG         0x00
 106 #define ASENCODE_OVERLAPPED_COMMAND             0x00
 107
 108 #define BYTE0(x) (unsigned char)(x)
 109 #define BYTE1(x) (unsigned char)((x) >> 8)
 110 #define BYTE2(x) (unsigned char)((x) >> 16)
 111 #define BYTE3(x) (unsigned char)((x) >> 24)
 112
 113 /*------------------------------------------------------------------------------
 114  *              S T R U C T S / T Y P E D E F S
 115  *----------------------------------------------------------------------------*/
 116 /* SCSI inquiry data */
 117 struct inquiry_data {
 118         u8 inqd_pdt;    /* Peripheral qualifier | Peripheral Device Type  */
 119         u8 inqd_dtq;    /* RMB | Device Type Qualifier  */
 120         u8 inqd_ver;    /* ISO version | ECMA version | ANSI-approved version */
 121         u8 inqd_rdf;    /* AENC | TrmIOP | Response data format */
 122         u8 inqd_len;    /* Additional length (n-4) */
 123         u8 inqd_pad1[2];/* Reserved - must be zero */
 124         u8 inqd_pad2;   /* RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */
 125         u8 inqd_vid[8]; /* Vendor ID */
 126         u8 inqd_pid[16];/* Product ID */
 127         u8 inqd_prl[4]; /* Product Revision Level */
 128 };
 129
 130 /*
 131  *              M O D U L E   G L O B A L S
 132  */
 133
 134 static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap);
 135 static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg);
 136 static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg);
 137 static int aac_send_srb_fib(struct scsi_cmnd* scsicmd);
 138 #ifdef AAC_DETAILED_STATUS_INFO
 139 static char *aac_get_status_string(u32 status);
 140 #endif
 141
 142 /*
 143  *      Non dasd selection is handled entirely in aachba now
 144  */
 145
 146 static int nondasd = -1;
 147 static int dacmode = -1;
 148
 149 int aac_commit = -1;
 150 int startup_timeout = 180;
 151 int aif_timeout = 120;
 152
 153 module_param(nondasd, int, S_IRUGO|S_IWUSR);
 154 MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on");
 155 module_param(dacmode, int, S_IRUGO|S_IWUSR);
 156 MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on");
 157 module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
 158 MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on");
 159 module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
 160 MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for adapter to have it's kernel up and\nrunning. This is typically adjusted for large systems that do not have a BIOS.");
 161 module_param(aif_timeout, int, S_IRUGO|S_IWUSR);
 162 MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for applications to pick up AIFs before\nderegistering them. This is typically adjusted for heavily burdened systems.");
 163
 164 int numacb = -1;
 165 module_param(numacb, int, S_IRUGO|S_IWUSR);
 166 MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware.");
 167
 168 int acbsize = -1;
 169 module_param(acbsize, int, S_IRUGO|S_IWUSR);
 170 MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware.");
 171
 172 int update_interval = 30 * 60;
 173 module_param(update_interval, int, S_IRUGO|S_IWUSR);
 174 MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync updates issued to adapter.");
 175
 176 int check_interval = 24 * 60 * 60;
 177 module_param(check_interval, int, S_IRUGO|S_IWUSR);
 178 MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health checks.");
 179
 180 int check_reset = 1;
 181 module_param(check_reset, int, S_IRUGO|S_IWUSR);
 182 MODULE_PARM_DESC(check_reset, "If adapter fails health check, reset the adapter.");
 183
 184 int expose_physicals = -1;
 185 module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
 186 MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. -1=protect 0=off, 1=on");
 187
 188 int aac_reset_devices = 0;
 189 module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR);
 190 MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization.");
 191
 192 static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
 193                 struct fib *fibptr) {
 194         struct scsi_device *device;
 195
 196         if (unlikely(!scsicmd || !scsicmd->scsi_done )) {
 197                 dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"))
 198 ;
 199                 aac_fib_complete(fibptr);
 200                 aac_fib_free(fibptr);
 201                 return 0;
 202         }
 203         scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
 204         device = scsicmd->device;
 205         if (unlikely(!device || !scsi_device_online(device))) {
 206                 dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
 207                 aac_fib_complete(fibptr);
 208                 aac_fib_free(fibptr);
 209                 return 0;
 210         }
 211         return 1;
 212 }
 213
 214 /**
 215  *      aac_get_config_status   -       check the adapter configuration
 216  *      @common: adapter to query
 217  *
 218  *      Query config status, and commit the configuration if needed.
 219  */
 220 int aac_get_config_status(struct aac_dev *dev, int commit_flag)
 221 {
 222         int status = 0;
 223         struct fib * fibptr;
 224
 225         if (!(fibptr = aac_fib_alloc(dev)))
 226                 return -ENOMEM;
 227
 228         aac_fib_init(fibptr);
 229         {
 230                 struct aac_get_config_status *dinfo;
 231                 dinfo = (struct aac_get_config_status *) fib_data(fibptr);
 232
 233                 dinfo->command = cpu_to_le32(VM_ContainerConfig);
 234                 dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS);
 235                 dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data));
 236         }
 237
 238         status = aac_fib_send(ContainerCommand,
 239                             fibptr,
 240                             sizeof (struct aac_get_config_status),
 241                             FsaNormal,
 242                             1, 1,
 243                             NULL, NULL);
 244         if (status < 0 ) {
 245                 printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n");
 246         } else {
 247                 struct aac_get_config_status_resp *reply
 248                   = (struct aac_get_config_status_resp *) fib_data(fibptr);
 249                 dprintk((KERN_WARNING
 250                   "aac_get_config_status: response=%d status=%d action=%d\n",
 251                   le32_to_cpu(reply->response),
 252                   le32_to_cpu(reply->status),
 253                   le32_to_cpu(reply->data.action)));
 254                 if ((le32_to_cpu(reply->response) != ST_OK) ||
 255                      (le32_to_cpu(reply->status) != CT_OK) ||
 256                      (le32_to_cpu(reply->data.action) > CFACT_PAUSE)) {
 257                         printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n");
 258                         status = -EINVAL;
 259                 }
 260         }
 261         aac_fib_complete(fibptr);
 262         /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
 263         if (status >= 0) {
 264                 if ((aac_commit == 1) || commit_flag) {
 265                         struct aac_commit_config * dinfo;
 266                         aac_fib_init(fibptr);
 267                         dinfo = (struct aac_commit_config *) fib_data(fibptr);
 268
 269                         dinfo->command = cpu_to_le32(VM_ContainerConfig);
 270                         dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG);
 271
 272                         status = aac_fib_send(ContainerCommand,
 273                                     fibptr,
 274                                     sizeof (struct aac_commit_config),
 275                                     FsaNormal,
 276                                     1, 1,
 277                                     NULL, NULL);
 278                         aac_fib_complete(fibptr);
 279                 } else if (aac_commit == 0) {
 280                         printk(KERN_WARNING
 281                           "aac_get_config_status: Foreign device configurations are being ignored\n");
 282                 }
 283         }
 284         aac_fib_free(fibptr);
 285         return status;
 286 }
 287
 288 /**
 289  *      aac_get_containers      -       list containers
 290  *      @common: adapter to probe
 291  *
 292  *      Make a list of all containers on this controller
 293  */
 294 int aac_get_containers(struct aac_dev *dev)
 295 {
 296         struct fsa_dev_info *fsa_dev_ptr;
 297         u32 index;
 298         int status = 0;
 299         struct fib * fibptr;
 300         struct aac_get_container_count *dinfo;
 301         struct aac_get_container_count_resp *dresp;
 302         int maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
 303
 304         if (!(fibptr = aac_fib_alloc(dev)))
 305                 return -ENOMEM;
 306
 307         aac_fib_init(fibptr);
 308         dinfo = (struct aac_get_container_count *) fib_data(fibptr);
 309         dinfo->command = cpu_to_le32(VM_ContainerConfig);
 310         dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT);
 311
 312         status = aac_fib_send(ContainerCommand,
 313                     fibptr,
 314                     sizeof (struct aac_get_container_count),
 315                     FsaNormal,
 316                     1, 1,
 317                     NULL, NULL);
 318         if (status >= 0) {
 319                 dresp = (struct aac_get_container_count_resp *)fib_data(fibptr);
 320                 maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
 321                 aac_fib_complete(fibptr);
 322         }
 323         aac_fib_free(fibptr);
 324
 325         if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
 326                 maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
 327         fsa_dev_ptr = kzalloc(sizeof(*fsa_dev_ptr) * maximum_num_containers,
 328                         GFP_KERNEL);
 329         if (!fsa_dev_ptr)
 330                 return -ENOMEM;
 331
 332         dev->fsa_dev = fsa_dev_ptr;
 333         dev->maximum_num_containers = maximum_num_containers;
 334
 335         for (index = 0; index < dev->maximum_num_containers; ) {
 336                 fsa_dev_ptr[index].devname[0] = '\0';
 337
 338                 status = aac_probe_container(dev, index);
 339
 340                 if (status < 0) {
 341                         printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
 342                         break;
 343                 }
 344
 345                 /*
 346                  *      If there are no more containers, then stop asking.
 347                  */
 348                 if (++index >= status)
 349                         break;
 350         }
 351         return status;
 352 }
 353
 354 static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigned int offset, unsigned int len)
 355 {
 356         void *buf;
 357         int transfer_len;
 358         struct scatterlist *sg = scsi_sglist(scsicmd);
 359
 360         buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
 361         transfer_len = min(sg->length, len + offset);
 362
 363         transfer_len -= offset;
 364         if (buf && transfer_len > 0)
 365                 memcpy(buf + offset, data, transfer_len);
 366
 367         kunmap_atomic(buf - sg->offset, KM_IRQ0);
 368
 369 }
 370
 371 static void get_container_name_callback(void *context, struct fib * fibptr)
 372 {
 373         struct aac_get_name_resp * get_name_reply;
 374         struct scsi_cmnd * scsicmd;
 375
 376         scsicmd = (struct scsi_cmnd *) context;
 377
 378         if (!aac_valid_context(scsicmd, fibptr))
 379                 return;
 380
 381         dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies));
 382         BUG_ON(fibptr == NULL);
 383
 384         get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr);
 385         /* Failure is irrelevant, using default value instead */
 386         if ((le32_to_cpu(get_name_reply->status) == CT_OK)
 387          && (get_name_reply->data[0] != '\0')) {
 388                 char *sp = get_name_reply->data;
 389                 sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0';
 390                 while (*sp == ' ')
 391                         ++sp;
 392                 if (*sp) {
 393                         char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)];
 394                         int count = sizeof(d);
 395                         char *dp = d;
 396                         do {
 397                                 *dp++ = (*sp) ? *sp++ : ' ';
 398                         } while (--count > 0);
 399                         aac_internal_transfer(scsicmd, d,
 400                           offsetof(struct inquiry_data, inqd_pid), sizeof(d));
 401                 }
 402         }
 403
 404         scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
 405
 406         aac_fib_complete(fibptr);
 407         aac_fib_free(fibptr);
 408         scsicmd->scsi_done(scsicmd);
 409 }
 410
 411 /**
 412  *      aac_get_container_name  -       get container name, none blocking.
 413  */
 414 static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 415 {
 416         int status;
 417         struct aac_get_name *dinfo;
 418         struct fib * cmd_fibcontext;
 419         struct aac_dev * dev;
 420
 421         dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 422
 423         if (!(cmd_fibcontext = aac_fib_alloc(dev)))
 424                 return -ENOMEM;
 425
 426         aac_fib_init(cmd_fibcontext);
 427         dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
 428
 429         dinfo->command = cpu_to_le32(VM_ContainerConfig);
 430         dinfo->type = cpu_to_le32(CT_READ_NAME);
 431         dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
 432         dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
 433
 434         status = aac_fib_send(ContainerCommand,
 435                   cmd_fibcontext,
 436                   sizeof (struct aac_get_name),
 437                   FsaNormal,
 438                   0, 1,
 439                   (fib_callback) get_container_name_callback,
 440                   (void *) scsicmd);
 441
 442         /*
 443          *      Check that the command queued to the controller
 444          */
 445         if (status == -EINPROGRESS) {
 446                 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
 447                 return 0;
 448         }
 449
 450         printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
 451         aac_fib_complete(cmd_fibcontext);
 452         aac_fib_free(cmd_fibcontext);
 453         return -1;
 454 }
 455
 456 static int aac_probe_container_callback2(struct scsi_cmnd * scsicmd)
 457 {
 458         struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
 459
 460         if ((fsa_dev_ptr[scmd_id(scsicmd)].valid & 1))
 461                 return aac_scsi_cmd(scsicmd);
 462
 463         scsicmd->result = DID_NO_CONNECT << 16;
 464         scsicmd->scsi_done(scsicmd);
 465         return 0;
 466 }
 467
 468 static void _aac_probe_container2(void * context, struct fib * fibptr)
 469 {
 470         struct fsa_dev_info *fsa_dev_ptr;
 471         int (*callback)(struct scsi_cmnd *);
 472         struct scsi_cmnd * scsicmd = (struct scsi_cmnd *)context;
 473
 474
 475         if (!aac_valid_context(scsicmd, fibptr))
 476                 return;
 477
 478         scsicmd->SCp.Status = 0;
 479         fsa_dev_ptr = fibptr->dev->fsa_dev;
 480         if (fsa_dev_ptr) {
 481                 struct aac_mount * dresp = (struct aac_mount *) fib_data(fibptr);
 482                 fsa_dev_ptr += scmd_id(scsicmd);
 483
 484                 if ((le32_to_cpu(dresp->status) == ST_OK) &&
 485                     (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
 486                     (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
 487                         fsa_dev_ptr->valid = 1;
 488                         fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
 489                         fsa_dev_ptr->size
 490                           = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
 491                             (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
 492                         fsa_dev_ptr->ro = ((le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) != 0);
 493                 }
 494                 if ((fsa_dev_ptr->valid & 1) == 0)
 495                         fsa_dev_ptr->valid = 0;
 496                 scsicmd->SCp.Status = le32_to_cpu(dresp->count);
 497         }
 498         aac_fib_complete(fibptr);
 499         aac_fib_free(fibptr);
 500         callback = (int (*)(struct scsi_cmnd *))(scsicmd->SCp.ptr);
 501         scsicmd->SCp.ptr = NULL;
 502         (*callback)(scsicmd);
 503         return;
 504 }
 505
 506 static void _aac_probe_container1(void * context, struct fib * fibptr)
 507 {
 508         struct scsi_cmnd * scsicmd;
 509         struct aac_mount * dresp;
 510         struct aac_query_mount *dinfo;
 511         int status;
 512
 513         dresp = (struct aac_mount *) fib_data(fibptr);
 514         dresp->mnt[0].capacityhigh = 0;
 515         if ((le32_to_cpu(dresp->status) != ST_OK) ||
 516             (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE)) {
 517                 _aac_probe_container2(context, fibptr);
 518                 return;
 519         }
 520         scsicmd = (struct scsi_cmnd *) context;
 521
 522         if (!aac_valid_context(scsicmd, fibptr))
 523                 return;
 524
 525         aac_fib_init(fibptr);
 526
 527         dinfo = (struct aac_query_mount *)fib_data(fibptr);
 528
 529         dinfo->command = cpu_to_le32(VM_NameServe64);
 530         dinfo->count = cpu_to_le32(scmd_id(scsicmd));
 531         dinfo->type = cpu_to_le32(FT_FILESYS);
 532
 533         status = aac_fib_send(ContainerCommand,
 534                           fibptr,
 535                           sizeof(struct aac_query_mount),
 536                           FsaNormal,
 537                           0, 1,
 538                           _aac_probe_container2,
 539                           (void *) scsicmd);
 540         /*
 541          *      Check that the command queued to the controller
 542          */
 543         if (status == -EINPROGRESS)
 544                 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
 545         else if (status < 0) {
 546                 /* Inherit results from VM_NameServe, if any */
 547                 dresp->status = cpu_to_le32(ST_OK);
 548                 _aac_probe_container2(context, fibptr);
 549         }
 550 }
 551
 552 static int _aac_probe_container(struct scsi_cmnd * scsicmd, int (*callback)(struct scsi_cmnd *))
 553 {
 554         struct fib * fibptr;
 555         int status = -ENOMEM;
 556
 557         if ((fibptr = aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) {
 558                 struct aac_query_mount *dinfo;
 559
 560                 aac_fib_init(fibptr);
 561
 562                 dinfo = (struct aac_query_mount *)fib_data(fibptr);
 563
 564                 dinfo->command = cpu_to_le32(VM_NameServe);
 565                 dinfo->count = cpu_to_le32(scmd_id(scsicmd));
 566                 dinfo->type = cpu_to_le32(FT_FILESYS);
 567                 scsicmd->SCp.ptr = (char *)callback;
 568
 569                 status = aac_fib_send(ContainerCommand,
 570                           fibptr,
 571                           sizeof(struct aac_query_mount),
 572                           FsaNormal,
 573                           0, 1,
 574                           _aac_probe_container1,
 575                           (void *) scsicmd);
 576                 /*
 577                  *      Check that the command queued to the controller
 578                  */
 579                 if (status == -EINPROGRESS) {
 580                         scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
 581                         return 0;
 582                 }
 583                 if (status < 0) {
 584                         scsicmd->SCp.ptr = NULL;
 585                         aac_fib_complete(fibptr);
 586                         aac_fib_free(fibptr);
 587                 }
 588         }
 589         if (status < 0) {
 590                 struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
 591                 if (fsa_dev_ptr) {
 592                         fsa_dev_ptr += scmd_id(scsicmd);
 593                         if ((fsa_dev_ptr->valid & 1) == 0) {
 594                                 fsa_dev_ptr->valid = 0;
 595                                 return (*callback)(scsicmd);
 596                         }
 597                 }
 598         }
 599         return status;
 600 }
 601
 602 /**
 603  *      aac_probe_container             -       query a logical volume
 604  *      @dev: device to query
 605  *      @cid: container identifier
 606  *
 607  *      Queries the controller about the given volume. The volume information
 608  *      is updated in the struct fsa_dev_info structure rather than returned.
 609  */
 610 static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd)
 611 {
 612         scsicmd->device = NULL;
 613         return 0;
 614 }
 615
 616 int aac_probe_container(struct aac_dev *dev, int cid)
 617 {
 618         struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL);
 619         struct scsi_device *scsidev = kmalloc(sizeof(*scsidev), GFP_KERNEL);
 620         int status;
 621
 622         if (!scsicmd || !scsidev) {
 623                 kfree(scsicmd);
 624                 kfree(scsidev);
 625                 return -ENOMEM;
 626         }
 627         scsicmd->list.next = NULL;
 628         scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))aac_probe_container_callback1;
 629
 630         scsicmd->device = scsidev;
 631         scsidev->sdev_state = 0;
 632         scsidev->id = cid;
 633         scsidev->host = dev->scsi_host_ptr;
 634
 635         if (_aac_probe_container(scsicmd, aac_probe_container_callback1) == 0)
 636                 while (scsicmd->device == scsidev)
 637                         schedule();
 638         kfree(scsidev);
 639         status = scsicmd->SCp.Status;
 640         kfree(scsicmd);
 641         return status;
 642 }
 643
 644 /* Local Structure to set SCSI inquiry data strings */
 645 struct scsi_inq {
 646         char vid[8];         /* Vendor ID */
 647         char pid[16];        /* Product ID */
 648         char prl[4];         /* Product Revision Level */
 649 };
 650
 651 /**
 652  *      InqStrCopy      -       string merge
 653  *      @a:     string to copy from
 654  *      @b:     string to copy to
 655  *
 656  *      Copy a String from one location to another
 657  *      without copying \0
 658  */
 659
 660 static void inqstrcpy(char *a, char *b)
 661 {
 662
 663         while(*a != (char)0)
 664                 *b++ = *a++;
 665 }
 666
 667 static char *container_types[] = {
 668         "None",
 669         "Volume",
 670         "Mirror",
 671         "Stripe",
 672         "RAID5",
 673         "SSRW",
 674         "SSRO",
 675         "Morph",
 676         "Legacy",
 677         "RAID4",
 678         "RAID10",
 679         "RAID00",
 680         "V-MIRRORS",
 681         "PSEUDO R4",
 682         "RAID50",
 683         "RAID5D",
 684         "RAID5D0",
 685         "RAID1E",
 686         "RAID6",
 687         "RAID60",
 688         "Unknown"
 689 };
 690
 691
 692
 693 /* Function: setinqstr
 694  *
 695  * Arguments: [1] pointer to void [1] int
 696  *
 697  * Purpose: Sets SCSI inquiry data strings for vendor, product
 698  * and revision level. Allows strings to be set in platform dependant
 699  * files instead of in OS dependant driver source.
 700  */
 701
 702 static void setinqstr(struct aac_dev *dev, void *data, int tindex)
 703 {
 704         struct scsi_inq *str;
 705
 706         str = (struct scsi_inq *)(data); /* cast data to scsi inq block */
 707         memset(str, ' ', sizeof(*str));
 708
 709         if (dev->supplement_adapter_info.AdapterTypeText[0]) {
 710                 char * cp = dev->supplement_adapter_info.AdapterTypeText;
 711                 int c = sizeof(str->vid);
 712                 while (*cp && *cp != ' ' && --c)
 713                         ++cp;
 714                 c = *cp;
 715                 *cp = '\0';
 716                 inqstrcpy (dev->supplement_adapter_info.AdapterTypeText,
 717                   str->vid);
 718                 *cp = c;
 719                 while (*cp && *cp != ' ')
 720                         ++cp;
 721                 while (*cp == ' ')
 722                         ++cp;
 723                 /* last six chars reserved for vol type */
 724                 c = 0;
 725                 if (strlen(cp) > sizeof(str->pid)) {
 726                         c = cp[sizeof(str->pid)];
 727                         cp[sizeof(str->pid)] = '\0';
 728                 }
 729                 inqstrcpy (cp, str->pid);
 730                 if (c)
 731                         cp[sizeof(str->pid)] = c;
 732         } else {
 733                 struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype);
 734
 735                 inqstrcpy (mp->vname, str->vid);
 736                 /* last six chars reserved for vol type */
 737                 inqstrcpy (mp->model, str->pid);
 738         }
 739
 740         if (tindex < ARRAY_SIZE(container_types)){
 741                 char *findit = str->pid;
 742
 743                 for ( ; *findit != ' '; findit++); /* walk till we find a space */
 744                 /* RAID is superfluous in the context of a RAID device */
 745                 if (memcmp(findit-4, "RAID", 4) == 0)
 746                         *(findit -= 4) = ' ';
 747                 if (((findit - str->pid) + strlen(container_types[tindex]))
 748                  < (sizeof(str->pid) + sizeof(str->prl)))
 749                         inqstrcpy (container_types[tindex], findit + 1);
 750         }
 751         inqstrcpy ("V1.0", str->prl);
 752 }
 753
 754 static void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code,
 755                       u8 a_sense_code, u8 incorrect_length,
 756                       u8 bit_pointer, u16 field_pointer,
 757                       u32 residue)
 758 {
 759         sense_buf[0] = 0xF0;    /* Sense data valid, err code 70h (current error) */
 760         sense_buf[1] = 0;       /* Segment number, always zero */
 761
 762         if (incorrect_length) {
 763                 sense_buf[2] = sense_key | 0x20;/* Set ILI bit | sense key */
 764                 sense_buf[3] = BYTE3(residue);
 765                 sense_buf[4] = BYTE2(residue);
 766                 sense_buf[5] = BYTE1(residue);
 767                 sense_buf[6] = BYTE0(residue);
 768         } else
 769                 sense_buf[2] = sense_key;       /* Sense key */
 770
 771         if (sense_key == ILLEGAL_REQUEST)
 772                 sense_buf[7] = 10;      /* Additional sense length */
 773         else
 774                 sense_buf[7] = 6;       /* Additional sense length */
 775
 776         sense_buf[12] = sense_code;     /* Additional sense code */
 777         sense_buf[13] = a_sense_code;   /* Additional sense code qualifier */
 778         if (sense_key == ILLEGAL_REQUEST) {
 779                 sense_buf[15] = 0;
 780
 781                 if (sense_code == SENCODE_INVALID_PARAM_FIELD)
 782                         sense_buf[15] = 0x80;/* Std sense key specific field */
 783                 /* Illegal parameter is in the parameter block */
 784
 785                 if (sense_code == SENCODE_INVALID_CDB_FIELD)
 786                         sense_buf[15] = 0xc0;/* Std sense key specific field */
 787                 /* Illegal parameter is in the CDB block */
 788                 sense_buf[15] |= bit_pointer;
 789                 sense_buf[16] = field_pointer >> 8;     /* MSB */
 790                 sense_buf[17] = field_pointer;          /* LSB */
 791         }
 792 }
 793
 794 static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
 795 {
 796         if (lba & 0xffffffff00000000LL) {
 797                 int cid = scmd_id(cmd);
 798                 dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
 799                 cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
 800                         SAM_STAT_CHECK_CONDITION;
 801                 set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
 802                             HARDWARE_ERROR,
 803                             SENCODE_INTERNAL_TARGET_FAILURE,
 804                             ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
 805                             0, 0);
 806                 memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
 807                   (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(cmd->sense_buffer))
 808                     ? sizeof(cmd->sense_buffer)
 809                     : sizeof(dev->fsa_dev[cid].sense_data));
 810                 cmd->scsi_done(cmd);
 811                 return 1;
 812         }
 813         return 0;
 814 }
 815
 816 static int aac_bounds_64(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
 817 {
 818         return 0;
 819 }
 820
 821 static void io_callback(void *context, struct fib * fibptr);
 822
 823 static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
 824 {
 825         u16 fibsize;
 826         struct aac_raw_io *readcmd;
 827         aac_fib_init(fib);
 828         readcmd = (struct aac_raw_io *) fib_data(fib);
 829         readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
 830         readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
 831         readcmd->count = cpu_to_le32(count<<9);
 832         readcmd->cid = cpu_to_le16(scmd_id(cmd));
 833         readcmd->flags = cpu_to_le16(IO_TYPE_READ);
 834         readcmd->bpTotal = 0;
 835         readcmd->bpComplete = 0;
 836
 837         aac_build_sgraw(cmd, &readcmd->sg);
 838         fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentryraw));
 839         BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
 840         /*
 841          *      Now send the Fib to the adapter
 842          */
 843         return aac_fib_send(ContainerRawIo,
 844                           fib,
 845                           fibsize,
 846                           FsaNormal,
 847                           0, 1,
 848                           (fib_callback) io_callback,
 849                           (void *) cmd);
 850 }
 851
 852 static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
 853 {
 854         u16 fibsize;
 855         struct aac_read64 *readcmd;
 856         aac_fib_init(fib);
 857         readcmd = (struct aac_read64 *) fib_data(fib);
 858         readcmd->command = cpu_to_le32(VM_CtHostRead64);
 859         readcmd->cid = cpu_to_le16(scmd_id(cmd));
 860         readcmd->sector_count = cpu_to_le16(count);
 861         readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
 862         readcmd->pad   = 0;
 863         readcmd->flags = 0;
 864
 865         aac_build_sg64(cmd, &readcmd->sg);
 866         fibsize = sizeof(struct aac_read64) +
 867                 ((le32_to_cpu(readcmd->sg.count) - 1) *
 868                  sizeof (struct sgentry64));
 869         BUG_ON (fibsize > (fib->dev->max_fib_size -
 870                                 sizeof(struct aac_fibhdr)));
 871         /*
 872          *      Now send the Fib to the adapter
 873          */
 874         return aac_fib_send(ContainerCommand64,
 875                           fib,
 876                           fibsize,
 877                           FsaNormal,
 878                           0, 1,
 879                           (fib_callback) io_callback,
 880                           (void *) cmd);
 881 }
 882
 883 static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
 884 {
 885         u16 fibsize;
 886         struct aac_read *readcmd;
 887         aac_fib_init(fib);
 888         readcmd = (struct aac_read *) fib_data(fib);
 889         readcmd->command = cpu_to_le32(VM_CtBlockRead);
 890         readcmd->cid = cpu_to_le16(scmd_id(cmd));
 891         readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
 892         readcmd->count = cpu_to_le32(count * 512);
 893
 894         aac_build_sg(cmd, &readcmd->sg);
 895         fibsize = sizeof(struct aac_read) +
 896                         ((le32_to_cpu(readcmd->sg.count) - 1) *
 897                          sizeof (struct sgentry));
 898         BUG_ON (fibsize > (fib->dev->max_fib_size -
 899                                 sizeof(struct aac_fibhdr)));
 900         /*
 901          *      Now send the Fib to the adapter
 902          */
 903         return aac_fib_send(ContainerCommand,
 904                           fib,
 905                           fibsize,
 906                           FsaNormal,
 907                           0, 1,
 908                           (fib_callback) io_callback,
 909                           (void *) cmd);
 910 }
 911
 912 static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
 913 {
 914         u16 fibsize;
 915         struct aac_raw_io *writecmd;
 916         aac_fib_init(fib);
 917         writecmd = (struct aac_raw_io *) fib_data(fib);
 918         writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
 919         writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
 920         writecmd->count = cpu_to_le32(count<<9);
 921         writecmd->cid = cpu_to_le16(scmd_id(cmd));
 922         writecmd->flags = fua ?
 923                 cpu_to_le16(IO_TYPE_WRITE|IO_SUREWRITE) :
 924                 cpu_to_le16(IO_TYPE_WRITE);
 925         writecmd->bpTotal = 0;
 926         writecmd->bpComplete = 0;
 927
 928         aac_build_sgraw(cmd, &writecmd->sg);
 929         fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentryraw));
 930         BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
 931         /*
 932          *      Now send the Fib to the adapter
 933          */
 934         return aac_fib_send(ContainerRawIo,
 935                           fib,
 936                           fibsize,
 937                           FsaNormal,
 938                           0, 1,
 939                           (fib_callback) io_callback,
 940                           (void *) cmd);
 941 }
 942
 943 static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
 944 {
 945         u16 fibsize;
 946         struct aac_write64 *writecmd;
 947         aac_fib_init(fib);
 948         writecmd = (struct aac_write64 *) fib_data(fib);
 949         writecmd->command = cpu_to_le32(VM_CtHostWrite64);
 950         writecmd->cid = cpu_to_le16(scmd_id(cmd));
 951         writecmd->sector_count = cpu_to_le16(count);
 952         writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
 953         writecmd->pad   = 0;
 954         writecmd->flags = 0;
 955
 956         aac_build_sg64(cmd, &writecmd->sg);
 957         fibsize = sizeof(struct aac_write64) +
 958                 ((le32_to_cpu(writecmd->sg.count) - 1) *
 959                  sizeof (struct sgentry64));
 960         BUG_ON (fibsize > (fib->dev->max_fib_size -
 961                                 sizeof(struct aac_fibhdr)));
 962         /*
 963          *      Now send the Fib to the adapter
 964          */
 965         return aac_fib_send(ContainerCommand64,
 966                           fib,
 967                           fibsize,
 968                           FsaNormal,
 969                           0, 1,
 970                           (fib_callback) io_callback,
 971                           (void *) cmd);
 972 }
 973
 974 static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
 975 {
 976         u16 fibsize;
 977         struct aac_write *writecmd;
 978         aac_fib_init(fib);
 979         writecmd = (struct aac_write *) fib_data(fib);
 980         writecmd->command = cpu_to_le32(VM_CtBlockWrite);
 981         writecmd->cid = cpu_to_le16(scmd_id(cmd));
 982         writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
 983         writecmd->count = cpu_to_le32(count * 512);
 984         writecmd->sg.count = cpu_to_le32(1);
 985         /* ->stable is not used - it did mean which type of write */
 986
 987         aac_build_sg(cmd, &writecmd->sg);
 988         fibsize = sizeof(struct aac_write) +
 989                 ((le32_to_cpu(writecmd->sg.count) - 1) *
 990                  sizeof (struct sgentry));
 991         BUG_ON (fibsize > (fib->dev->max_fib_size -
 992                                 sizeof(struct aac_fibhdr)));
 993         /*
 994          *      Now send the Fib to the adapter
 995          */
 996         return aac_fib_send(ContainerCommand,
 997                           fib,
 998                           fibsize,
 999                           FsaNormal,
1000                           0, 1,
1001                           (fib_callback) io_callback,
1002                           (void *) cmd);
1003 }
1004
1005 static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd)
1006 {
1007         struct aac_srb * srbcmd;
1008         u32 flag;
1009         u32 timeout;
1010
1011         aac_fib_init(fib);
1012         switch(cmd->sc_data_direction){
1013         case DMA_TO_DEVICE:
1014                 flag = SRB_DataOut;
1015                 break;
1016         case DMA_BIDIRECTIONAL:
1017                 flag = SRB_DataIn | SRB_DataOut;
1018                 break;
1019         case DMA_FROM_DEVICE:
1020                 flag = SRB_DataIn;
1021                 break;
1022         case DMA_NONE:
1023         default:        /* shuts up some versions of gcc */
1024                 flag = SRB_NoDataXfer;
1025                 break;
1026         }
1027
1028         srbcmd = (struct aac_srb*) fib_data(fib);
1029         srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
1030         srbcmd->channel  = cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd)));
1031         srbcmd->id       = cpu_to_le32(scmd_id(cmd));
1032         srbcmd->lun      = cpu_to_le32(cmd->device->lun);
1033         srbcmd->flags    = cpu_to_le32(flag);
1034         timeout = cmd->timeout_per_command/HZ;
1035         if (timeout == 0)
1036                 timeout = 1;
1037         srbcmd->timeout  = cpu_to_le32(timeout);  // timeout in seconds
1038         srbcmd->retry_limit = 0; /* Obsolete parameter */
1039         srbcmd->cdb_size = cpu_to_le32(cmd->cmd_len);
1040         return srbcmd;
1041 }
1042
1043 static void aac_srb_callback(void *context, struct fib * fibptr);
1044
1045 static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)
1046 {
1047         u16 fibsize;
1048         struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
1049
1050         aac_build_sg64(cmd, (struct sgmap64*) &srbcmd->sg);
1051         srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
1052
1053         memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1054         memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
1055         /*
1056          *      Build Scatter/Gather list
1057          */
1058         fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
1059                 ((le32_to_cpu(srbcmd->sg.count) & 0xff) *
1060                  sizeof (struct sgentry64));
1061         BUG_ON (fibsize > (fib->dev->max_fib_size -
1062                                 sizeof(struct aac_fibhdr)));
1063
1064         /*
1065          *      Now send the Fib to the adapter
1066          */
1067         return aac_fib_send(ScsiPortCommand64, fib,
1068                                 fibsize, FsaNormal, 0, 1,
1069                                   (fib_callback) aac_srb_callback,
1070                                   (void *) cmd);
1071 }
1072
1073 static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd)
1074 {
1075         u16 fibsize;
1076         struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
1077
1078         aac_build_sg(cmd, (struct sgmap*)&srbcmd->sg);
1079         srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
1080
1081         memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1082         memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
1083         /*
1084          *      Build Scatter/Gather list
1085          */
1086         fibsize = sizeof (struct aac_srb) +
1087                 (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
1088                  sizeof (struct sgentry));
1089         BUG_ON (fibsize > (fib->dev->max_fib_size -
1090                                 sizeof(struct aac_fibhdr)));
1091
1092         /*
1093          *      Now send the Fib to the adapter
1094          */
1095         return aac_fib_send(ScsiPortCommand, fib, fibsize, FsaNormal, 0, 1,
1096                                   (fib_callback) aac_srb_callback, (void *) cmd);
1097 }
1098
1099 int aac_get_adapter_info(struct aac_dev* dev)
1100 {
1101         struct fib* fibptr;
1102         int rcode;
1103         u32 tmp;
1104         struct aac_adapter_info *info;
1105         struct aac_bus_info *command;
1106         struct aac_bus_info_response *bus_info;
1107
1108         if (!(fibptr = aac_fib_alloc(dev)))
1109                 return -ENOMEM;
1110
1111         aac_fib_init(fibptr);
1112         info = (struct aac_adapter_info *) fib_data(fibptr);
1113         memset(info,0,sizeof(*info));
1114
1115         rcode = aac_fib_send(RequestAdapterInfo,
1116                          fibptr,
1117                          sizeof(*info),
1118                          FsaNormal,
1119                          -1, 1, /* First `interrupt' command uses special wait */
1120                          NULL,
1121                          NULL);
1122
1123         if (rcode < 0) {
1124                 aac_fib_complete(fibptr);
1125                 aac_fib_free(fibptr);
1126                 return rcode;
1127         }
1128         memcpy(&dev->adapter_info, info, sizeof(*info));
1129
1130         if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) {
1131                 struct aac_supplement_adapter_info * info;
1132
1133                 aac_fib_init(fibptr);
1134
1135                 info = (struct aac_supplement_adapter_info *) fib_data(fibptr);
1136
1137                 memset(info,0,sizeof(*info));
1138
1139                 rcode = aac_fib_send(RequestSupplementAdapterInfo,
1140                                  fibptr,
1141                                  sizeof(*info),
1142                                  FsaNormal,
1143                                  1, 1,
1144                                  NULL,
1145                                  NULL);
1146
1147                 if (rcode >= 0)
1148                         memcpy(&dev->supplement_adapter_info, info, sizeof(*info));
1149         }
1150
1151
1152         /*
1153          * GetBusInfo
1154          */
1155
1156         aac_fib_init(fibptr);
1157
1158         bus_info = (struct aac_bus_info_response *) fib_data(fibptr);
1159
1160         memset(bus_info, 0, sizeof(*bus_info));
1161
1162         command = (struct aac_bus_info *)bus_info;
1163
1164         command->Command = cpu_to_le32(VM_Ioctl);
1165         command->ObjType = cpu_to_le32(FT_DRIVE);
1166         command->MethodId = cpu_to_le32(1);
1167         command->CtlCmd = cpu_to_le32(GetBusInfo);
1168
1169         rcode = aac_fib_send(ContainerCommand,
1170                          fibptr,
1171                          sizeof (*bus_info),
1172                          FsaNormal,
1173                          1, 1,
1174                          NULL, NULL);
1175
1176         if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) {
1177                 dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus);
1178                 dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
1179         }
1180
1181         if (!dev->in_reset) {
1182                 char buffer[16];
1183                 tmp = le32_to_cpu(dev->adapter_info.kernelrev);
1184                 printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
1185                         dev->name,
1186                         dev->id,
1187                         tmp>>24,
1188                         (tmp>>16)&0xff,
1189                         tmp&0xff,
1190                         le32_to_cpu(dev->adapter_info.kernelbuild),
1191                         (int)sizeof(dev->supplement_adapter_info.BuildDate),
1192                         dev->supplement_adapter_info.BuildDate);
1193                 tmp = le32_to_cpu(dev->adapter_info.monitorrev);
1194                 printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
1195                         dev->name, dev->id,
1196                         tmp>>24,(tmp>>16)&0xff,tmp&0xff,
1197                         le32_to_cpu(dev->adapter_info.monitorbuild));
1198                 tmp = le32_to_cpu(dev->adapter_info.biosrev);
1199                 printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
1200                         dev->name, dev->id,
1201                         tmp>>24,(tmp>>16)&0xff,tmp&0xff,
1202                         le32_to_cpu(dev->adapter_info.biosbuild));
1203                 buffer[0] = '\0';
1204                 if (aac_show_serial_number(
1205                   shost_to_class(dev->scsi_host_ptr), buffer))
1206                         printk(KERN_INFO "%s%d: serial %s",
1207                           dev->name, dev->id, buffer);
1208                 if (dev->supplement_adapter_info.VpdInfo.Tsid[0]) {
1209                         printk(KERN_INFO "%s%d: TSID %.*s\n",
1210                           dev->name, dev->id,
1211                           (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid),
1212                           dev->supplement_adapter_info.VpdInfo.Tsid);
1213                 }
1214                 if (!check_reset ||
1215                   (dev->supplement_adapter_info.SupportedOptions2 &
1216                   le32_to_cpu(AAC_OPTION_IGNORE_RESET))) {
1217                         printk(KERN_INFO "%s%d: Reset Adapter Ignored\n",
1218                           dev->name, dev->id);
1219                 }
1220         }
1221
1222         dev->nondasd_support = 0;
1223         dev->raid_scsi_mode = 0;
1224         if(dev->adapter_info.options & AAC_OPT_NONDASD){
1225                 dev->nondasd_support = 1;
1226         }
1227
1228         /*
1229          * If the firmware supports ROMB RAID/SCSI mode and we are currently
1230          * in RAID/SCSI mode, set the flag. For now if in this mode we will
1231          * force nondasd support on. If we decide to allow the non-dasd flag
1232          * additional changes changes will have to be made to support
1233          * RAID/SCSI.  the function aac_scsi_cmd in this module will have to be
1234          * changed to support the new dev->raid_scsi_mode flag instead of
1235          * leaching off of the dev->nondasd_support flag. Also in linit.c the
1236          * function aac_detect will have to be modified where it sets up the
1237          * max number of channels based on the aac->nondasd_support flag only.
1238          */
1239         if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) &&
1240             (dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) {
1241                 dev->nondasd_support = 1;
1242                 dev->raid_scsi_mode = 1;
1243         }
1244         if (dev->raid_scsi_mode != 0)
1245                 printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
1246                                 dev->name, dev->id);
1247
1248         if(nondasd != -1) {
1249                 dev->nondasd_support = (nondasd!=0);
1250         }
1251         if(dev->nondasd_support != 0){
1252                 printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
1253         }
1254
1255         dev->dac_support = 0;
1256         if( (sizeof(dma_addr_t) > 4) && (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)){
1257                 printk(KERN_INFO "%s%d: 64bit support enabled.\n", dev->name, dev->id);
1258                 dev->dac_support = 1;
1259         }
1260
1261         if(dacmode != -1) {
1262                 dev->dac_support = (dacmode!=0);
1263         }
1264         if(dev->dac_support != 0) {
1265                 if (!pci_set_dma_mask(dev->pdev, DMA_64BIT_MASK) &&
1266                         !pci_set_consistent_dma_mask(dev->pdev, DMA_64BIT_MASK)) {
1267                         printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
1268                                 dev->name, dev->id);
1269                 } else if (!pci_set_dma_mask(dev->pdev, DMA_32BIT_MASK) &&
1270                         !pci_set_consistent_dma_mask(dev->pdev, DMA_32BIT_MASK)) {
1271                         printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
1272                                 dev->name, dev->id);
1273                         dev->dac_support = 0;
1274                 } else {
1275                         printk(KERN_WARNING"%s%d: No suitable DMA available.\n",
1276                                 dev->name, dev->id);
1277                         rcode = -ENOMEM;
1278                 }
1279         }
1280         /*
1281          * Deal with configuring for the individualized limits of each packet
1282          * interface.
1283          */
1284         dev->a_ops.adapter_scsi = (dev->dac_support)
1285                                 ? aac_scsi_64
1286                                 : aac_scsi_32;
1287         if (dev->raw_io_interface) {
1288                 dev->a_ops.adapter_bounds = (dev->raw_io_64)
1289                                         ? aac_bounds_64
1290                                         : aac_bounds_32;
1291                 dev->a_ops.adapter_read = aac_read_raw_io;
1292                 dev->a_ops.adapter_write = aac_write_raw_io;
1293         } else {
1294                 dev->a_ops.adapter_bounds = aac_bounds_32;
1295                 dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size -
1296                         sizeof(struct aac_fibhdr) -
1297                         sizeof(struct aac_write) + sizeof(struct sgentry)) /
1298                                 sizeof(struct sgentry);
1299                 if (dev->dac_support) {
1300                         dev->a_ops.adapter_read = aac_read_block64;
1301                         dev->a_ops.adapter_write = aac_write_block64;
1302                         /*
1303                          * 38 scatter gather elements
1304                          */
1305                         dev->scsi_host_ptr->sg_tablesize =
1306                                 (dev->max_fib_size -
1307                                 sizeof(struct aac_fibhdr) -
1308                                 sizeof(struct aac_write64) +
1309                                 sizeof(struct sgentry64)) /
1310                                         sizeof(struct sgentry64);
1311                 } else {
1312                         dev->a_ops.adapter_read = aac_read_block;
1313                         dev->a_ops.adapter_write = aac_write_block;
1314                 }
1315                 dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
1316                 if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
1317                         /*
1318                          * Worst case size that could cause sg overflow when
1319                          * we break up SG elements that are larger than 64KB.
1320                          * Would be nice if we could tell the SCSI layer what
1321                          * the maximum SG element size can be. Worst case is
1322                          * (sg_tablesize-1) 4KB elements with one 64KB
1323                          * element.
1324                          *      32bit -> 468 or 238KB   64bit -> 424 or 212KB
1325                          */
1326                         dev->scsi_host_ptr->max_sectors =
1327                           (dev->scsi_host_ptr->sg_tablesize * 8) + 112;
1328                 }
1329         }
1330
1331         aac_fib_complete(fibptr);
1332         aac_fib_free(fibptr);
1333
1334         return rcode;
1335 }
1336
1337
1338 static void io_callback(void *context, struct fib * fibptr)
1339 {
1340         struct aac_dev *dev;
1341         struct aac_read_reply *readreply;
1342         struct scsi_cmnd *scsicmd;
1343         u32 cid;
1344
1345         scsicmd = (struct scsi_cmnd *) context;
1346
1347         if (!aac_valid_context(scsicmd, fibptr))
1348                 return;
1349
1350         dev = fibptr->dev;
1351         cid = scmd_id(scsicmd);
1352
1353         if (nblank(dprintk(x))) {
1354                 u64 lba;
1355                 switch (scsicmd->cmnd[0]) {
1356                 case WRITE_6:
1357                 case READ_6:
1358                         lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
1359                             (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1360                         break;
1361                 case WRITE_16:
1362                 case READ_16:
1363                         lba = ((u64)scsicmd->cmnd[2] << 56) |
1364                               ((u64)scsicmd->cmnd[3] << 48) |
1365                               ((u64)scsicmd->cmnd[4] << 40) |
1366                               ((u64)scsicmd->cmnd[5] << 32) |
1367                               ((u64)scsicmd->cmnd[6] << 24) |
1368                               (scsicmd->cmnd[7] << 16) |
1369                               (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1370                         break;
1371                 case WRITE_12:
1372                 case READ_12:
1373                         lba = ((u64)scsicmd->cmnd[2] << 24) |
1374                               (scsicmd->cmnd[3] << 16) |
1375                               (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1376                         break;
1377                 default:
1378                         lba = ((u64)scsicmd->cmnd[2] << 24) |
1379                                (scsicmd->cmnd[3] << 16) |
1380                                (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1381                         break;
1382                 }
1383                 printk(KERN_DEBUG
1384                   "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
1385                   smp_processor_id(), (unsigned long long)lba, jiffies);
1386         }
1387
1388         BUG_ON(fibptr == NULL);
1389
1390         scsi_dma_unmap(scsicmd);
1391
1392         readreply = (struct aac_read_reply *)fib_data(fibptr);
1393         if (le32_to_cpu(readreply->status) == ST_OK)
1394                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1395         else {
1396 #ifdef AAC_DETAILED_STATUS_INFO
1397                 printk(KERN_WARNING "io_callback: io failed, status = %d\n",
1398                   le32_to_cpu(readreply->status));
1399 #endif
1400                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
1401                 set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
1402                                     HARDWARE_ERROR,
1403                                     SENCODE_INTERNAL_TARGET_FAILURE,
1404                                     ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
1405                                     0, 0);
1406                 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1407                   (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer))
1408                     ? sizeof(scsicmd->sense_buffer)
1409                     : sizeof(dev->fsa_dev[cid].sense_data));
1410         }
1411         aac_fib_complete(fibptr);
1412         aac_fib_free(fibptr);
1413
1414         scsicmd->scsi_done(scsicmd);
1415 }
1416
1417 static int aac_read(struct scsi_cmnd * scsicmd)
1418 {
1419         u64 lba;
1420         u32 count;
1421         int status;
1422         struct aac_dev *dev;
1423         struct fib * cmd_fibcontext;
1424
1425         dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1426         /*
1427          *      Get block address and transfer length
1428          */
1429         switch (scsicmd->cmnd[0]) {
1430         case READ_6:
1431                 dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd)));
1432
1433                 lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
1434                         (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1435                 count = scsicmd->cmnd[4];
1436
1437                 if (count == 0)
1438                         count = 256;
1439                 break;
1440         case READ_16:
1441                 dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd)));
1442
1443                 lba =   ((u64)scsicmd->cmnd[2] << 56) |
1444                         ((u64)scsicmd->cmnd[3] << 48) |
1445                         ((u64)scsicmd->cmnd[4] << 40) |
1446                         ((u64)scsicmd->cmnd[5] << 32) |
1447                         ((u64)scsicmd->cmnd[6] << 24) |
1448                         (scsicmd->cmnd[7] << 16) |
1449                         (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1450                 count = (scsicmd->cmnd[10] << 24) |
1451                         (scsicmd->cmnd[11] << 16) |
1452                         (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
1453                 break;
1454         case READ_12:
1455                 dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd)));
1456
1457                 lba = ((u64)scsicmd->cmnd[2] << 24) |
1458                         (scsicmd->cmnd[3] << 16) |
1459                         (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1460                 count = (scsicmd->cmnd[6] << 24) |
1461                         (scsicmd->cmnd[7] << 16) |
1462                         (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1463                 break;
1464         default:
1465                 dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd)));
1466
1467                 lba = ((u64)scsicmd->cmnd[2] << 24) |
1468                         (scsicmd->cmnd[3] << 16) |
1469                         (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1470                 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
1471                 break;
1472         }
1473         dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
1474           smp_processor_id(), (unsigned long long)lba, jiffies));
1475         if (aac_adapter_bounds(dev,scsicmd,lba))
1476                 return 0;
1477         /*
1478          *      Alocate and initialize a Fib
1479          */
1480         if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
1481                 return -1;
1482         }
1483
1484         status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count);
1485
1486         /*
1487          *      Check that the command queued to the controller
1488          */
1489         if (status == -EINPROGRESS) {
1490                 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1491                 return 0;
1492         }
1493
1494         printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status);
1495         /*
1496          *      For some reason, the Fib didn't queue, return QUEUE_FULL
1497          */
1498         scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
1499         scsicmd->scsi_done(scsicmd);
1500         aac_fib_complete(cmd_fibcontext);
1501         aac_fib_free(cmd_fibcontext);
1502         return 0;
1503 }
1504
1505 static int aac_write(struct scsi_cmnd * scsicmd)
1506 {
1507         u64 lba;
1508         u32 count;
1509         int fua;
1510         int status;
1511         struct aac_dev *dev;
1512         struct fib * cmd_fibcontext;
1513
1514         dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1515         /*
1516          *      Get block address and transfer length
1517          */
1518         if (scsicmd->cmnd[0] == WRITE_6)        /* 6 byte command */
1519         {
1520                 lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1521                 count = scsicmd->cmnd[4];
1522                 if (count == 0)
1523                         count = 256;
1524                 fua = 0;
1525         } else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */
1526                 dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd)));
1527
1528                 lba =   ((u64)scsicmd->cmnd[2] << 56) |
1529                         ((u64)scsicmd->cmnd[3] << 48) |
1530                         ((u64)scsicmd->cmnd[4] << 40) |
1531                         ((u64)scsicmd->cmnd[5] << 32) |
1532                         ((u64)scsicmd->cmnd[6] << 24) |
1533                         (scsicmd->cmnd[7] << 16) |
1534                         (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1535                 count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) |
1536                         (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
1537                 fua = scsicmd->cmnd[1] & 0x8;
1538         } else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */
1539                 dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd)));
1540
1541                 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16)
1542                     | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1543                 count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16)
1544                       | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1545                 fua = scsicmd->cmnd[1] & 0x8;
1546         } else {
1547                 dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd)));
1548                 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1549                 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
1550                 fua = scsicmd->cmnd[1] & 0x8;
1551         }
1552         dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
1553           smp_processor_id(), (unsigned long long)lba, jiffies));
1554         if (aac_adapter_bounds(dev,scsicmd,lba))
1555                 return 0;
1556         /*
1557          *      Allocate and initialize a Fib then setup a BlockWrite command
1558          */
1559         if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
1560                 scsicmd->result = DID_ERROR << 16;
1561                 scsicmd->scsi_done(scsicmd);
1562                 return 0;
1563         }
1564
1565         status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
1566
1567         /*
1568          *      Check that the command queued to the controller
1569          */
1570         if (status == -EINPROGRESS) {
1571                 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1572                 return 0;
1573         }
1574
1575         printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status);
1576         /*
1577          *      For some reason, the Fib didn't queue, return QUEUE_FULL
1578          */
1579         scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
1580         scsicmd->scsi_done(scsicmd);
1581
1582         aac_fib_complete(cmd_fibcontext);
1583         aac_fib_free(cmd_fibcontext);
1584         return 0;
1585 }
1586
1587 static void synchronize_callback(void *context, struct fib *fibptr)
1588 {
1589         struct aac_synchronize_reply *synchronizereply;
1590         struct scsi_cmnd *cmd;
1591
1592         cmd = context;
1593
1594         if (!aac_valid_context(cmd, fibptr))
1595                 return;
1596
1597         dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n",
1598                                 smp_processor_id(), jiffies));
1599         BUG_ON(fibptr == NULL);
1600
1601
1602         synchronizereply = fib_data(fibptr);
1603         if (le32_to_cpu(synchronizereply->status) == CT_OK)
1604                 cmd->result = DID_OK << 16 |
1605                         COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1606         else {
1607                 struct scsi_device *sdev = cmd->device;
1608                 struct aac_dev *dev = fibptr->dev;
1609                 u32 cid = sdev_id(sdev);
1610                 printk(KERN_WARNING
1611                      "synchronize_callback: synchronize failed, status = %d\n",
1612                      le32_to_cpu(synchronizereply->status));
1613                 cmd->result = DID_OK << 16 |
1614                         COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
1615                 set_sense((u8 *)&dev->fsa_dev[cid].sense_data,
1616                                     HARDWARE_ERROR,
1617                                     SENCODE_INTERNAL_TARGET_FAILURE,
1618                                     ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
1619                                     0, 0);
1620                 memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1621                   min(sizeof(dev->fsa_dev[cid].sense_data),
1622                           sizeof(cmd->sense_buffer)));
1623         }
1624
1625         aac_fib_complete(fibptr);
1626         aac_fib_free(fibptr);
1627         cmd->scsi_done(cmd);
1628 }
1629
1630 static int aac_synchronize(struct scsi_cmnd *scsicmd)
1631 {
1632         int status;
1633         struct fib *cmd_fibcontext;
1634         struct aac_synchronize *synchronizecmd;
1635         struct scsi_cmnd *cmd;
1636         struct scsi_device *sdev = scsicmd->device;
1637         int active = 0;
1638         struct aac_dev *aac;
1639         unsigned long flags;
1640
1641         /*
1642          * Wait for all outstanding queued commands to complete to this
1643          * specific target (block).
1644          */
1645         spin_lock_irqsave(&sdev->list_lock, flags);
1646         list_for_each_entry(cmd, &sdev->cmd_list, list)
1647                 if (cmd != scsicmd && cmd->SCp.phase == AAC_OWNER_FIRMWARE) {
1648                         ++active;
1649                         break;
1650                 }
1651
1652         spin_unlock_irqrestore(&sdev->list_lock, flags);
1653
1654         /*
1655          *      Yield the processor (requeue for later)
1656          */
1657         if (active)
1658                 return SCSI_MLQUEUE_DEVICE_BUSY;
1659
1660         aac = (struct aac_dev *)scsicmd->device->host->hostdata;
1661         if (aac->in_reset)
1662                 return SCSI_MLQUEUE_HOST_BUSY;
1663
1664         /*
1665          *      Allocate and initialize a Fib
1666          */
1667         if (!(cmd_fibcontext = aac_fib_alloc(aac)))
1668                 return SCSI_MLQUEUE_HOST_BUSY;
1669
1670         aac_fib_init(cmd_fibcontext);
1671
1672         synchronizecmd = fib_data(cmd_fibcontext);
1673         synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
1674         synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
1675         synchronizecmd->cid = cpu_to_le32(scmd_id(scsicmd));
1676         synchronizecmd->count =
1677              cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
1678
1679         /*
1680          *      Now send the Fib to the adapter
1681          */
1682         status = aac_fib_send(ContainerCommand,
1683                   cmd_fibcontext,
1684                   sizeof(struct aac_synchronize),
1685                   FsaNormal,
1686                   0, 1,
1687                   (fib_callback)synchronize_callback,
1688                   (void *)scsicmd);
1689
1690         /*
1691          *      Check that the command queued to the controller
1692          */
1693         if (status == -EINPROGRESS) {
1694                 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1695                 return 0;
1696         }
1697
1698         printk(KERN_WARNING
1699                 "aac_synchronize: aac_fib_send failed with status: %d.\n", status);
1700         aac_fib_complete(cmd_fibcontext);
1701         aac_fib_free(cmd_fibcontext);
1702         return SCSI_MLQUEUE_HOST_BUSY;
1703 }
1704
1705 /**
1706  *      aac_scsi_cmd()          -       Process SCSI command
1707  *      @scsicmd:               SCSI command block
1708  *
1709  *      Emulate a SCSI command and queue the required request for the
1710  *      aacraid firmware.
1711  */
1712
1713 int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
1714 {
1715         u32 cid;
1716         struct Scsi_Host *host = scsicmd->device->host;
1717         struct aac_dev *dev = (struct aac_dev *)host->hostdata;
1718         struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev;
1719
1720         if (fsa_dev_ptr == NULL)
1721                 return -1;
1722         /*
1723          *      If the bus, id or lun is out of range, return fail
1724          *      Test does not apply to ID 16, the pseudo id for the controller
1725          *      itself.
1726          */
1727         cid = scmd_id(scsicmd);
1728         if (cid != host->this_id) {
1729                 if (scmd_channel(scsicmd) == CONTAINER_CHANNEL) {
1730                         if((cid >= dev->maximum_num_containers) ||
1731                                         (scsicmd->device->lun != 0)) {
1732                                 scsicmd->result = DID_NO_CONNECT << 16;
1733                                 scsicmd->scsi_done(scsicmd);
1734                                 return 0;
1735                         }
1736
1737                         /*
1738                          *      If the target container doesn't exist, it may have
1739                          *      been newly created
1740                          */
1741                         if ((fsa_dev_ptr[cid].valid & 1) == 0) {
1742                                 switch (scsicmd->cmnd[0]) {
1743                                 case SERVICE_ACTION_IN:
1744                                         if (!(dev->raw_io_interface) ||
1745                                             !(dev->raw_io_64) ||
1746                                             ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
1747                                                 break;
1748                                 case INQUIRY:
1749                                 case READ_CAPACITY:
1750                                 case TEST_UNIT_READY:
1751                                         if (dev->in_reset)
1752                                                 return -1;
1753                                         return _aac_probe_container(scsicmd,
1754                                                         aac_probe_container_callback2);
1755                                 default:
1756                                         break;
1757                                 }
1758                         }
1759                 } else {  /* check for physical non-dasd devices */
1760                         if ((dev->nondasd_support == 1) || expose_physicals) {
1761                                 if (dev->in_reset)
1762                                         return -1;
1763                                 return aac_send_srb_fib(scsicmd);
1764                         } else {
1765                                 scsicmd->result = DID_NO_CONNECT << 16;
1766                                 scsicmd->scsi_done(scsicmd);
1767                                 return 0;
1768                         }
1769                 }
1770         }
1771         /*
1772          * else Command for the controller itself
1773          */
1774         else if ((scsicmd->cmnd[0] != INQUIRY) &&       /* only INQUIRY & TUR cmnd supported for controller */
1775                 (scsicmd->cmnd[0] != TEST_UNIT_READY))
1776         {
1777                 dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0]));
1778                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
1779                 set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
1780                             ILLEGAL_REQUEST,
1781                             SENCODE_INVALID_COMMAND,
1782                             ASENCODE_INVALID_COMMAND, 0, 0, 0, 0);
1783                 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1784                   (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer))
1785                     ? sizeof(scsicmd->sense_buffer)
1786                     : sizeof(dev->fsa_dev[cid].sense_data));
1787                 scsicmd->scsi_done(scsicmd);
1788                 return 0;
1789         }
1790
1791
1792         /* Handle commands here that don't really require going out to the adapter */
1793         switch (scsicmd->cmnd[0]) {
1794         case INQUIRY:
1795         {
1796                 struct inquiry_data inq_data;
1797
1798                 dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid));
1799                 memset(&inq_data, 0, sizeof (struct inquiry_data));
1800
1801                 inq_data.inqd_ver = 2;  /* claim compliance to SCSI-2 */
1802                 inq_data.inqd_rdf = 2;  /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
1803                 inq_data.inqd_len = 31;
1804                 /*Format for "pad2" is  RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */
1805                 inq_data.inqd_pad2= 0x32 ;       /*WBus16|Sync|CmdQue */
1806                 /*
1807                  *      Set the Vendor, Product, and Revision Level
1808                  *      see: <vendor>.c i.e. aac.c
1809                  */
1810                 if (cid == host->this_id) {
1811                         setinqstr(dev, (void *) (inq_data.inqd_vid), ARRAY_SIZE(container_types));
1812                         inq_data.inqd_pdt = INQD_PDT_PROC;      /* Processor device */
1813                         aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
1814                         scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1815                         scsicmd->scsi_done(scsicmd);
1816                         return 0;
1817                 }
1818                 if (dev->in_reset)
1819                         return -1;
1820                 setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
1821                 inq_data.inqd_pdt = INQD_PDT_DA;        /* Direct/random access device */
1822                 aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
1823                 return aac_get_container_name(scsicmd);
1824         }
1825         case SERVICE_ACTION_IN:
1826                 if (!(dev->raw_io_interface) ||
1827                     !(dev->raw_io_64) ||
1828                     ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
1829                         break;
1830         {
1831                 u64 capacity;
1832                 char cp[13];
1833
1834                 dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n"));
1835                 capacity = fsa_dev_ptr[cid].size - 1;
1836                 cp[0] = (capacity >> 56) & 0xff;
1837                 cp[1] = (capacity >> 48) & 0xff;
1838                 cp[2] = (capacity >> 40) & 0xff;
1839                 cp[3] = (capacity >> 32) & 0xff;
1840                 cp[4] = (capacity >> 24) & 0xff;
1841                 cp[5] = (capacity >> 16) & 0xff;
1842                 cp[6] = (capacity >> 8) & 0xff;
1843                 cp[7] = (capacity >> 0) & 0xff;
1844                 cp[8] = 0;
1845                 cp[9] = 0;
1846                 cp[10] = 2;
1847                 cp[11] = 0;
1848                 cp[12] = 0;
1849                 aac_internal_transfer(scsicmd, cp, 0,
1850                   min_t(size_t, scsicmd->cmnd[13], sizeof(cp)));
1851                 if (sizeof(cp) < scsicmd->cmnd[13]) {
1852                         unsigned int len, offset = sizeof(cp);
1853
1854                         memset(cp, 0, offset);
1855                         do {
1856                                 len = min_t(size_t, scsicmd->cmnd[13] - offset,
1857                                                 sizeof(cp));
1858                                 aac_internal_transfer(scsicmd, cp, offset, len);
1859                         } while ((offset += len) < scsicmd->cmnd[13]);
1860                 }
1861
1862                 /* Do not cache partition table for arrays */
1863                 scsicmd->device->removable = 1;
1864
1865                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1866                 scsicmd->scsi_done(scsicmd);
1867
1868                 return 0;
1869         }
1870
1871         case READ_CAPACITY:
1872         {
1873                 u32 capacity;
1874                 char cp[8];
1875
1876                 dprintk((KERN_DEBUG "READ CAPACITY command.\n"));
1877                 if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
1878                         capacity = fsa_dev_ptr[cid].size - 1;
1879                 else
1880                         capacity = (u32)-1;
1881
1882                 cp[0] = (capacity >> 24) & 0xff;
1883                 cp[1] = (capacity >> 16) & 0xff;
1884                 cp[2] = (capacity >> 8) & 0xff;
1885                 cp[3] = (capacity >> 0) & 0xff;
1886                 cp[4] = 0;
1887                 cp[5] = 0;
1888                 cp[6] = 2;
1889                 cp[7] = 0;
1890                 aac_internal_transfer(scsicmd, cp, 0, sizeof(cp));
1891                 /* Do not cache partition table for arrays */
1892                 scsicmd->device->removable = 1;
1893
1894                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1895                 scsicmd->scsi_done(scsicmd);
1896
1897                 return 0;
1898         }
1899
1900         case MODE_SENSE:
1901         {
1902                 char mode_buf[7];
1903                 int mode_buf_length = 4;
1904
1905                 dprintk((KERN_DEBUG "MODE SENSE command.\n"));
1906                 mode_buf[0] = 3;        /* Mode data length */
1907                 mode_buf[1] = 0;        /* Medium type - default */
1908                 mode_buf[2] = 0;        /* Device-specific param,
1909                                            bit 8: 0/1 = write enabled/protected
1910                                            bit 4: 0/1 = FUA enabled */
1911                 if (dev->raw_io_interface)
1912                         mode_buf[2] = 0x10;
1913                 mode_buf[3] = 0;        /* Block descriptor length */
1914                 if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
1915                   ((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
1916                         mode_buf[0] = 6;
1917                         mode_buf[4] = 8;
1918                         mode_buf[5] = 1;
1919                         mode_buf[6] = 0x04; /* WCE */
1920                         mode_buf_length = 7;
1921                         if (mode_buf_length > scsicmd->cmnd[4])
1922                                 mode_buf_length = scsicmd->cmnd[4];
1923                 }
1924                 aac_internal_transfer(scsicmd, mode_buf, 0, mode_buf_length);
1925                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1926                 scsicmd->scsi_done(scsicmd);
1927
1928                 return 0;
1929         }
1930         case MODE_SENSE_10:
1931         {
1932                 char mode_buf[11];
1933                 int mode_buf_length = 8;
1934
1935                 dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n"));
1936                 mode_buf[0] = 0;        /* Mode data length (MSB) */
1937                 mode_buf[1] = 6;        /* Mode data length (LSB) */
1938                 mode_buf[2] = 0;        /* Medium type - default */
1939                 mode_buf[3] = 0;        /* Device-specific param,
1940                                            bit 8: 0/1 = write enabled/protected
1941                                            bit 4: 0/1 = FUA enabled */
1942                 if (dev->raw_io_interface)
1943                         mode_buf[3] = 0x10;
1944                 mode_buf[4] = 0;        /* reserved */
1945                 mode_buf[5] = 0;        /* reserved */
1946                 mode_buf[6] = 0;        /* Block descriptor length (MSB) */
1947                 mode_buf[7] = 0;        /* Block descriptor length (LSB) */
1948                 if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
1949                   ((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
1950                         mode_buf[1] = 9;
1951                         mode_buf[8] = 8;
1952                         mode_buf[9] = 1;
1953                         mode_buf[10] = 0x04; /* WCE */
1954                         mode_buf_length = 11;
1955                         if (mode_buf_length > scsicmd->cmnd[8])
1956                                 mode_buf_length = scsicmd->cmnd[8];
1957                 }
1958                 aac_internal_transfer(scsicmd, mode_buf, 0, mode_buf_length);
1959
1960                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1961                 scsicmd->scsi_done(scsicmd);
1962
1963                 return 0;
1964         }
1965         case REQUEST_SENSE:
1966                 dprintk((KERN_DEBUG "REQUEST SENSE command.\n"));
1967                 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, sizeof (struct sense_data));
1968                 memset(&dev->fsa_dev[cid].sense_data, 0, sizeof (struct sense_data));
1969                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1970                 scsicmd->scsi_done(scsicmd);
1971                 return 0;
1972
1973         case ALLOW_MEDIUM_REMOVAL:
1974                 dprintk((KERN_DEBUG "LOCK command.\n"));
1975                 if (scsicmd->cmnd[4])
1976                         fsa_dev_ptr[cid].locked = 1;
1977                 else
1978                         fsa_dev_ptr[cid].locked = 0;
1979
1980                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1981                 scsicmd->scsi_done(scsicmd);
1982                 return 0;
1983         /*
1984          *      These commands are all No-Ops
1985          */
1986         case TEST_UNIT_READY:
1987         case RESERVE:
1988         case RELEASE:
1989         case REZERO_UNIT:
1990         case REASSIGN_BLOCKS:
1991         case SEEK_10:
1992         case START_STOP:
1993                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1994                 scsicmd->scsi_done(scsicmd);
1995                 return 0;
1996         }
1997
1998         switch (scsicmd->cmnd[0])
1999         {
2000                 case READ_6:
2001                 case READ_10:
2002                 case READ_12:
2003                 case READ_16:
2004                         if (dev->in_reset)
2005                                 return -1;
2006                         /*
2007                          *      Hack to keep track of ordinal number of the device that
2008                          *      corresponds to a container. Needed to convert
2009                          *      containers to /dev/sd device names
2010                          */
2011
2012                         if (scsicmd->request->rq_disk)
2013                                 strlcpy(fsa_dev_ptr[cid].devname,
2014                                 scsicmd->request->rq_disk->disk_name,
2015                                 min(sizeof(fsa_dev_ptr[cid].devname),
2016                                 sizeof(scsicmd->request->rq_disk->disk_name) + 1));
2017
2018                         return aac_read(scsicmd);
2019
2020                 case WRITE_6:
2021                 case WRITE_10:
2022                 case WRITE_12:
2023                 case WRITE_16:
2024                         if (dev->in_reset)
2025                                 return -1;
2026                         return aac_write(scsicmd);
2027
2028                 case SYNCHRONIZE_CACHE:
2029                         /* Issue FIB to tell Firmware to flush it's cache */
2030                         return aac_synchronize(scsicmd);
2031
2032                 default:
2033                         /*
2034                          *      Unhandled commands
2035                          */
2036                         dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]));
2037                         scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2038                         set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
2039                                 ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
2040                                 ASENCODE_INVALID_COMMAND, 0, 0, 0, 0);
2041                         memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2042                           (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer))
2043                             ? sizeof(scsicmd->sense_buffer)
2044                             : sizeof(dev->fsa_dev[cid].sense_data));
2045                         scsicmd->scsi_done(scsicmd);
2046                         return 0;
2047         }
2048 }
2049
2050 static int query_disk(struct aac_dev *dev, void __user *arg)
2051 {
2052         struct aac_query_disk qd;
2053         struct fsa_dev_info *fsa_dev_ptr;
2054
2055         fsa_dev_ptr = dev->fsa_dev;
2056         if (!fsa_dev_ptr)
2057                 return -EBUSY;
2058         if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk)))
2059                 return -EFAULT;
2060         if (qd.cnum == -1)
2061                 qd.cnum = qd.id;
2062         else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1))
2063         {
2064                 if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers)
2065                         return -EINVAL;
2066                 qd.instance = dev->scsi_host_ptr->host_no;
2067                 qd.bus = 0;
2068                 qd.id = CONTAINER_TO_ID(qd.cnum);
2069                 qd.lun = CONTAINER_TO_LUN(qd.cnum);
2070         }
2071         else return -EINVAL;
2072
2073         qd.valid = fsa_dev_ptr[qd.cnum].valid;
2074         qd.locked = fsa_dev_ptr[qd.cnum].locked;
2075         qd.deleted = fsa_dev_ptr[qd.cnum].deleted;
2076
2077         if (fsa_dev_ptr[qd.cnum].devname[0] == '\0')
2078                 qd.unmapped = 1;
2079         else
2080                 qd.unmapped = 0;
2081
2082         strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname,
2083           min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1));
2084
2085         if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk)))
2086                 return -EFAULT;
2087         return 0;
2088 }
2089
2090 static int force_delete_disk(struct aac_dev *dev, void __user *arg)
2091 {
2092         struct aac_delete_disk dd;
2093         struct fsa_dev_info *fsa_dev_ptr;
2094
2095         fsa_dev_ptr = dev->fsa_dev;
2096         if (!fsa_dev_ptr)
2097                 return -EBUSY;
2098
2099         if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
2100                 return -EFAULT;
2101
2102         if (dd.cnum >= dev->maximum_num_containers)
2103                 return -EINVAL;
2104         /*
2105          *      Mark this container as being deleted.
2106          */
2107         fsa_dev_ptr[dd.cnum].deleted = 1;
2108         /*
2109          *      Mark the container as no longer valid
2110          */
2111         fsa_dev_ptr[dd.cnum].valid = 0;
2112         return 0;
2113 }
2114
2115 static int delete_disk(struct aac_dev *dev, void __user *arg)
2116 {
2117         struct aac_delete_disk dd;
2118         struct fsa_dev_info *fsa_dev_ptr;
2119
2120         fsa_dev_ptr = dev->fsa_dev;
2121         if (!fsa_dev_ptr)
2122                 return -EBUSY;
2123
2124         if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
2125                 return -EFAULT;
2126
2127         if (dd.cnum >= dev->maximum_num_containers)
2128                 return -EINVAL;
2129         /*
2130          *      If the container is locked, it can not be deleted by the API.
2131          */
2132         if (fsa_dev_ptr[dd.cnum].locked)
2133                 return -EBUSY;
2134         else {
2135                 /*
2136                  *      Mark the container as no longer being valid.
2137                  */
2138                 fsa_dev_ptr[dd.cnum].valid = 0;
2139                 fsa_dev_ptr[dd.cnum].devname[0] = '\0';
2140                 return 0;
2141         }
2142 }
2143
2144 int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg)
2145 {
2146         switch (cmd) {
2147         case FSACTL_QUERY_DISK:
2148                 return query_disk(dev, arg);
2149         case FSACTL_DELETE_DISK:
2150                 return delete_disk(dev, arg);
2151         case FSACTL_FORCE_DELETE_DISK:
2152                 return force_delete_disk(dev, arg);
2153         case FSACTL_GET_CONTAINERS:
2154                 return aac_get_containers(dev);
2155         default:
2156                 return -ENOTTY;
2157         }
2158 }
2159
2160 /**
2161  *
2162  * aac_srb_callback
2163  * @context: the context set in the fib - here it is scsi cmd
2164  * @fibptr: pointer to the fib
2165  *
2166  * Handles the completion of a scsi command to a non dasd device
2167  *
2168  */
2169
2170 static void aac_srb_callback(void *context, struct fib * fibptr)
2171 {
2172         struct aac_dev *dev;
2173         struct aac_srb_reply *srbreply;
2174         struct scsi_cmnd *scsicmd;
2175
2176         scsicmd = (struct scsi_cmnd *) context;
2177
2178         if (!aac_valid_context(scsicmd, fibptr))
2179                 return;
2180
2181         BUG_ON(fibptr == NULL);
2182
2183         dev = fibptr->dev;
2184
2185         srbreply = (struct aac_srb_reply *) fib_data(fibptr);
2186
2187         scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */
2188         /*
2189          *      Calculate resid for sg
2190          */
2191
2192         scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
2193                        - le32_to_cpu(srbreply->data_xfer_length));
2194
2195         scsi_dma_unmap(scsicmd);
2196
2197         /*
2198          * First check the fib status
2199          */
2200
2201         if (le32_to_cpu(srbreply->status) != ST_OK){
2202                 int len;
2203                 printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
2204                 len = (le32_to_cpu(srbreply->sense_data_size) >
2205                                 sizeof(scsicmd->sense_buffer)) ?
2206                                 sizeof(scsicmd->sense_buffer) :
2207                                 le32_to_cpu(srbreply->sense_data_size);
2208                 scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2209                 memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
2210         }
2211
2212         /*
2213          * Next check the srb status
2214          */
2215         switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
2216         case SRB_STATUS_ERROR_RECOVERY:
2217         case SRB_STATUS_PENDING:
2218         case SRB_STATUS_SUCCESS:
2219                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
2220                 break;
2221         case SRB_STATUS_DATA_OVERRUN:
2222                 switch(scsicmd->cmnd[0]){
2223                 case  READ_6:
2224                 case  WRITE_6:
2225                 case  READ_10:
2226                 case  WRITE_10:
2227                 case  READ_12:
2228                 case  WRITE_12:
2229                 case  READ_16:
2230                 case  WRITE_16:
2231                         if(le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow ) {
2232                                 printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
2233                         } else {
2234                                 printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
2235                         }
2236                         scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
2237                         break;
2238                 case INQUIRY: {
2239                         scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
2240                         break;
2241                 }
2242                 default:
2243                         scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
2244                         break;
2245                 }
2246                 break;
2247         case SRB_STATUS_ABORTED:
2248                 scsicmd->result = DID_ABORT << 16 | ABORT << 8;
2249                 break;
2250         case SRB_STATUS_ABORT_FAILED:
2251                 // Not sure about this one - but assuming the hba was trying to abort for some reason
2252                 scsicmd->result = DID_ERROR << 16 | ABORT << 8;
2253                 break;
2254         case SRB_STATUS_PARITY_ERROR:
2255                 scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
2256                 break;
2257         case SRB_STATUS_NO_DEVICE:
2258         case SRB_STATUS_INVALID_PATH_ID:
2259         case SRB_STATUS_INVALID_TARGET_ID:
2260         case SRB_STATUS_INVALID_LUN:
2261         case SRB_STATUS_SELECTION_TIMEOUT:
2262                 scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
2263                 break;
2264
2265         case SRB_STATUS_COMMAND_TIMEOUT:
2266         case SRB_STATUS_TIMEOUT:
2267                 scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
2268                 break;
2269
2270         case SRB_STATUS_BUSY:
2271                 scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
2272                 break;
2273
2274         case SRB_STATUS_BUS_RESET:
2275                 scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
2276                 break;
2277
2278         case SRB_STATUS_MESSAGE_REJECTED:
2279                 scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
2280                 break;
2281         case SRB_STATUS_REQUEST_FLUSHED:
2282         case SRB_STATUS_ERROR:
2283         case SRB_STATUS_INVALID_REQUEST:
2284         case SRB_STATUS_REQUEST_SENSE_FAILED:
2285         case SRB_STATUS_NO_HBA:
2286         case SRB_STATUS_UNEXPECTED_BUS_FREE:
2287         case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
2288         case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
2289         case SRB_STATUS_DELAYED_RETRY:
2290         case SRB_STATUS_BAD_FUNCTION:
2291         case SRB_STATUS_NOT_STARTED:
2292         case SRB_STATUS_NOT_IN_USE:
2293         case SRB_STATUS_FORCE_ABORT:
2294         case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
2295         default:
2296 #ifdef AAC_DETAILED_STATUS_INFO
2297                 printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
2298                         le32_to_cpu(srbreply->srb_status) & 0x3F,
2299                         aac_get_status_string(
2300                                 le32_to_cpu(srbreply->srb_status) & 0x3F),
2301                         scsicmd->cmnd[0],
2302                         le32_to_cpu(srbreply->scsi_status));
2303 #endif
2304                 scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
2305                 break;
2306         }
2307         if (le32_to_cpu(srbreply->scsi_status) == 0x02 ){  // Check Condition
2308                 int len;
2309                 scsicmd->result |= SAM_STAT_CHECK_CONDITION;
2310                 len = (le32_to_cpu(srbreply->sense_data_size) >
2311                                 sizeof(scsicmd->sense_buffer)) ?
2312                                 sizeof(scsicmd->sense_buffer) :
2313                                 le32_to_cpu(srbreply->sense_data_size);
2314 #ifdef AAC_DETAILED_STATUS_INFO
2315                 printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
2316                                         le32_to_cpu(srbreply->status), len);
2317 #endif
2318                 memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
2319
2320         }
2321         /*
2322          * OR in the scsi status (already shifted up a bit)
2323          */
2324         scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
2325
2326         aac_fib_complete(fibptr);
2327         aac_fib_free(fibptr);
2328         scsicmd->scsi_done(scsicmd);
2329 }
2330
2331 /**
2332  *
2333  * aac_send_scb_fib
2334  * @scsicmd: the scsi command block
2335  *
2336  * This routine will form a FIB and fill in the aac_srb from the
2337  * scsicmd passed in.
2338  */
2339
2340 static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
2341 {
2342         struct fib* cmd_fibcontext;
2343         struct aac_dev* dev;
2344         int status;
2345
2346         dev = (struct aac_dev *)scsicmd->device->host->hostdata;
2347         if (scmd_id(scsicmd) >= dev->maximum_num_physicals ||
2348                         scsicmd->device->lun > 7) {
2349                 scsicmd->result = DID_NO_CONNECT << 16;
2350                 scsicmd->scsi_done(scsicmd);
2351                 return 0;
2352         }
2353
2354         /*
2355          *      Allocate and initialize a Fib then setup a BlockWrite command
2356          */
2357         if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
2358                 return -1;
2359         }
2360         status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
2361
2362         /*
2363          *      Check that the command queued to the controller
2364          */
2365         if (status == -EINPROGRESS) {
2366                 scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2367                 return 0;
2368         }
2369
2370         printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status);
2371         aac_fib_complete(cmd_fibcontext);
2372         aac_fib_free(cmd_fibcontext);
2373
2374         return -1;
2375 }
2376
2377 static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg)
2378 {
2379         struct aac_dev *dev;
2380         unsigned long byte_count = 0;
2381         int nseg;
2382
2383         dev = (struct aac_dev *)scsicmd->device->host->hostdata;
2384         // Get rid of old data
2385         psg->count = 0;
2386         psg->sg[0].addr = 0;
2387         psg->sg[0].count = 0;
2388
2389         nseg = scsi_dma_map(scsicmd);
2390         BUG_ON(nseg < 0);
2391         if (nseg) {
2392                 struct scatterlist *sg;
2393                 int i;
2394
2395                 psg->count = cpu_to_le32(nseg);
2396
2397                 scsi_for_each_sg(scsicmd, sg, nseg, i) {
2398                         psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg));
2399                         psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
2400                         byte_count += sg_dma_len(sg);
2401                 }
2402                 /* hba wants the size to be exact */
2403                 if (byte_count > scsi_bufflen(scsicmd)) {
2404                         u32 temp = le32_to_cpu(psg->sg[i-1].count) -
2405                                 (byte_count - scsi_bufflen(scsicmd));
2406                         psg->sg[i-1].count = cpu_to_le32(temp);
2407                         byte_count = scsi_bufflen(scsicmd);
2408                 }
2409                 /* Check for command underflow */
2410                 if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
2411                         printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
2412                                         byte_count, scsicmd->underflow);
2413                 }
2414         }
2415         return byte_count;
2416 }
2417
2418
2419 static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg)
2420 {
2421         struct aac_dev *dev;
2422         unsigned long byte_count = 0;
2423         u64 addr;
2424         int nseg;
2425
2426         dev = (struct aac_dev *)scsicmd->device->host->hostdata;
2427         // Get rid of old data
2428         psg->count = 0;
2429         psg->sg[0].addr[0] = 0;
2430         psg->sg[0].addr[1] = 0;
2431         psg->sg[0].count = 0;
2432
2433         nseg = scsi_dma_map(scsicmd);
2434         BUG_ON(nseg < 0);
2435         if (nseg) {
2436                 struct scatterlist *sg;
2437                 int i;
2438
2439                 scsi_for_each_sg(scsicmd, sg, nseg, i) {
2440                         int count = sg_dma_len(sg);
2441                         addr = sg_dma_address(sg);
2442                         psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
2443                         psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
2444                         psg->sg[i].count = cpu_to_le32(count);
2445                         byte_count += count;
2446                 }
2447                 psg->count = cpu_to_le32(nseg);
2448                 /* hba wants the size to be exact */
2449                 if (byte_count > scsi_bufflen(scsicmd)) {
2450                         u32 temp = le32_to_cpu(psg->sg[i-1].count) -
2451                                 (byte_count - scsi_bufflen(scsicmd));
2452                         psg->sg[i-1].count = cpu_to_le32(temp);
2453                         byte_count = scsi_bufflen(scsicmd);
2454                 }
2455                 /* Check for command underflow */
2456                 if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
2457                         printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
2458                                         byte_count, scsicmd->underflow);
2459                 }
2460         }
2461         return byte_count;
2462 }
2463
2464 static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg)
2465 {
2466         unsigned long byte_count = 0;
2467         int nseg;
2468
2469         // Get rid of old data
2470         psg->count = 0;
2471         psg->sg[0].next = 0;
2472         psg->sg[0].prev = 0;
2473         psg->sg[0].addr[0] = 0;
2474         psg->sg[0].addr[1] = 0;
2475         psg->sg[0].count = 0;
2476         psg->sg[0].flags = 0;
2477
2478         nseg = scsi_dma_map(scsicmd);
2479         BUG_ON(nseg < 0);
2480         if (nseg) {
2481                 struct scatterlist *sg;
2482                 int i;
2483
2484                 scsi_for_each_sg(scsicmd, sg, nseg, i) {
2485                         int count = sg_dma_len(sg);
2486                         u64 addr = sg_dma_address(sg);
2487                         psg->sg[i].next = 0;
2488                         psg->sg[i].prev = 0;
2489                         psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32));
2490                         psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff));
2491                         psg->sg[i].count = cpu_to_le32(count);
2492                         psg->sg[i].flags = 0;
2493                         byte_count += count;
2494                 }
2495                 psg->count = cpu_to_le32(nseg);
2496                 /* hba wants the size to be exact */
2497                 if (byte_count > scsi_bufflen(scsicmd)) {
2498                         u32 temp = le32_to_cpu(psg->sg[i-1].count) -
2499                                 (byte_count - scsi_bufflen(scsicmd));
2500                         psg->sg[i-1].count = cpu_to_le32(temp);
2501                         byte_count = scsi_bufflen(scsicmd);
2502                 }
2503                 /* Check for command underflow */
2504                 if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
2505                         printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
2506                                         byte_count, scsicmd->underflow);
2507                 }
2508         }
2509         return byte_count;
2510 }
2511
2512 #ifdef AAC_DETAILED_STATUS_INFO
2513
2514 struct aac_srb_status_info {
2515         u32     status;
2516         char    *str;
2517 };
2518
2519
2520 static struct aac_srb_status_info srb_status_info[] = {
2521         { SRB_STATUS_PENDING,           "Pending Status"},
2522         { SRB_STATUS_SUCCESS,           "Success"},
2523         { SRB_STATUS_ABORTED,           "Aborted Command"},
2524         { SRB_STATUS_ABORT_FAILED,      "Abort Failed"},
2525         { SRB_STATUS_ERROR,             "Error Event"},
2526         { SRB_STATUS_BUSY,              "Device Busy"},
2527         { SRB_STATUS_INVALID_REQUEST,   "Invalid Request"},
2528         { SRB_STATUS_INVALID_PATH_ID,   "Invalid Path ID"},
2529         { SRB_STATUS_NO_DEVICE,         "No Device"},
2530         { SRB_STATUS_TIMEOUT,           "Timeout"},
2531         { SRB_STATUS_SELECTION_TIMEOUT, "Selection Timeout"},
2532         { SRB_STATUS_COMMAND_TIMEOUT,   "Command Timeout"},
2533         { SRB_STATUS_MESSAGE_REJECTED,  "Message Rejected"},
2534         { SRB_STATUS_BUS_RESET,         "Bus Reset"},
2535         { SRB_STATUS_PARITY_ERROR,      "Parity Error"},
2536         { SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"},
2537         { SRB_STATUS_NO_HBA,            "No HBA"},
2538         { SRB_STATUS_DATA_OVERRUN,      "Data Overrun/Data Underrun"},
2539         { SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"},
2540         { SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"},
2541         { SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"},
2542         { SRB_STATUS_REQUEST_FLUSHED,   "Request Flushed"},
2543         { SRB_STATUS_DELAYED_RETRY,     "Delayed Retry"},
2544         { SRB_STATUS_INVALID_LUN,       "Invalid LUN"},
2545         { SRB_STATUS_INVALID_TARGET_ID, "Invalid TARGET ID"},
2546         { SRB_STATUS_BAD_FUNCTION,      "Bad Function"},
2547         { SRB_STATUS_ERROR_RECOVERY,    "Error Recovery"},
2548         { SRB_STATUS_NOT_STARTED,       "Not Started"},
2549         { SRB_STATUS_NOT_IN_USE,        "Not In Use"},
2550         { SRB_STATUS_FORCE_ABORT,       "Force Abort"},
2551         { SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"},
2552         { 0xff,                         "Unknown Error"}
2553 };
2554
2555 char *aac_get_status_string(u32 status)
2556 {
2557         int i;
2558
2559         for (i = 0; i < ARRAY_SIZE(srb_status_info); i++)
2560                 if (srb_status_info[i].status == status)
2561                         return srb_status_info[i].str;
2562
2563         return "Bad Status Code";
2564 }
2565
2566 #endif