drivers/net/wireless/rt2x00/rt2x00dev.c

   1 /*
   2         Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
   3         Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
   4         <http://rt2x00.serialmonkey.com>
   5
   6         This program is free software; you can redistribute it and/or modify
   7         it under the terms of the GNU General Public License as published by
   8         the Free Software Foundation; either version 2 of the License, or
   9         (at your option) any later version.
  10
  11         This program is distributed in the hope that it will be useful,
  12         but WITHOUT ANY WARRANTY; without even the implied warranty of
  13         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14         GNU General Public License for more details.
  15
  16         You should have received a copy of the GNU General Public License
  17         along with this program; if not, write to the
  18         Free Software Foundation, Inc.,
  19         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20  */
  21
  22 /*
  23         Module: rt2x00lib
  24         Abstract: rt2x00 generic device routines.
  25  */
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/slab.h>
  30 #include <linux/log2.h>
  31
  32 #include "rt2x00.h"
  33 #include "rt2x00lib.h"
  34
  35 /*
  36  * Utility functions.
  37  */
  38 u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
  39                          struct ieee80211_vif *vif)
  40 {
  41         /*
  42          * When in STA mode, bssidx is always 0 otherwise local_address[5]
  43          * contains the bss number, see BSS_ID_MASK comments for details.
  44          */
  45         if (rt2x00dev->intf_sta_count)
  46                 return 0;
  47         return vif->addr[5] & (rt2x00dev->ops->max_ap_intf - 1);
  48 }
  49 EXPORT_SYMBOL_GPL(rt2x00lib_get_bssidx);
  50
  51 /*
  52  * Radio control handlers.
  53  */
  54 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
  55 {
  56         int status;
  57
  58         /*
  59          * Don't enable the radio twice.
  60          * And check if the hardware button has been disabled.
  61          */
  62         if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
  63                 return 0;
  64
  65         /*
  66          * Initialize all data queues.
  67          */
  68         rt2x00queue_init_queues(rt2x00dev);
  69
  70         /*
  71          * Enable radio.
  72          */
  73         status =
  74             rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON);
  75         if (status)
  76                 return status;
  77
  78         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
  79
  80         rt2x00leds_led_radio(rt2x00dev, true);
  81         rt2x00led_led_activity(rt2x00dev, true);
  82
  83         set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
  84
  85         /*
  86          * Enable queues.
  87          */
  88         rt2x00queue_start_queues(rt2x00dev);
  89         rt2x00link_start_tuner(rt2x00dev);
  90         rt2x00link_start_agc(rt2x00dev);
  91         if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
  92                 rt2x00link_start_vcocal(rt2x00dev);
  93
  94         /*
  95          * Start watchdog monitoring.
  96          */
  97         rt2x00link_start_watchdog(rt2x00dev);
  98
  99         return 0;
 100 }
 101
 102 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 103 {
 104         if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 105                 return;
 106
 107         /*
 108          * Stop watchdog monitoring.
 109          */
 110         rt2x00link_stop_watchdog(rt2x00dev);
 111
 112         /*
 113          * Stop all queues
 114          */
 115         rt2x00link_stop_agc(rt2x00dev);
 116         if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
 117                 rt2x00link_stop_vcocal(rt2x00dev);
 118         rt2x00link_stop_tuner(rt2x00dev);
 119         rt2x00queue_stop_queues(rt2x00dev);
 120         rt2x00queue_flush_queues(rt2x00dev, true);
 121
 122         /*
 123          * Disable radio.
 124          */
 125         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
 126         rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
 127         rt2x00led_led_activity(rt2x00dev, false);
 128         rt2x00leds_led_radio(rt2x00dev, false);
 129 }
 130
 131 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 132                                           struct ieee80211_vif *vif)
 133 {
 134         struct rt2x00_dev *rt2x00dev = data;
 135         struct rt2x00_intf *intf = vif_to_intf(vif);
 136
 137         /*
 138          * It is possible the radio was disabled while the work had been
 139          * scheduled. If that happens we should return here immediately,
 140          * note that in the spinlock protected area above the delayed_flags
 141          * have been cleared correctly.
 142          */
 143         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 144                 return;
 145
 146         if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags))
 147                 rt2x00queue_update_beacon(rt2x00dev, vif);
 148 }
 149
 150 static void rt2x00lib_intf_scheduled(struct work_struct *work)
 151 {
 152         struct rt2x00_dev *rt2x00dev =
 153             container_of(work, struct rt2x00_dev, intf_work);
 154
 155         /*
 156          * Iterate over each interface and perform the
 157          * requested configurations.
 158          */
 159         ieee80211_iterate_active_interfaces(rt2x00dev->hw,
 160                                             IEEE80211_IFACE_ITER_RESUME_ALL,
 161                                             rt2x00lib_intf_scheduled_iter,
 162                                             rt2x00dev);
 163 }
 164
 165 static void rt2x00lib_autowakeup(struct work_struct *work)
 166 {
 167         struct rt2x00_dev *rt2x00dev =
 168             container_of(work, struct rt2x00_dev, autowakeup_work.work);
 169
 170         if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 171                 return;
 172
 173         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 174                 ERROR(rt2x00dev, "Device failed to wakeup.\n");
 175         clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
 176 }
 177
 178 /*
 179  * Interrupt context handlers.
 180  */
 181 static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
 182                                      struct ieee80211_vif *vif)
 183 {
 184         struct rt2x00_dev *rt2x00dev = data;
 185         struct sk_buff *skb;
 186
 187         /*
 188          * Only AP mode interfaces do broad- and multicast buffering
 189          */
 190         if (vif->type != NL80211_IFTYPE_AP)
 191                 return;
 192
 193         /*
 194          * Send out buffered broad- and multicast frames
 195          */
 196         skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
 197         while (skb) {
 198                 rt2x00mac_tx(rt2x00dev->hw, NULL, skb);
 199                 skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
 200         }
 201 }
 202
 203 static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac,
 204                                         struct ieee80211_vif *vif)
 205 {
 206         struct rt2x00_dev *rt2x00dev = data;
 207
 208         if (vif->type != NL80211_IFTYPE_AP &&
 209             vif->type != NL80211_IFTYPE_ADHOC &&
 210             vif->type != NL80211_IFTYPE_MESH_POINT &&
 211             vif->type != NL80211_IFTYPE_WDS)
 212                 return;
 213
 214         /*
 215          * Update the beacon without locking. This is safe on PCI devices
 216          * as they only update the beacon periodically here. This should
 217          * never be called for USB devices.
 218          */
 219         WARN_ON(rt2x00_is_usb(rt2x00dev));
 220         rt2x00queue_update_beacon_locked(rt2x00dev, vif);
 221 }
 222
 223 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
 224 {
 225         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 226                 return;
 227
 228         /* send buffered bc/mc frames out for every bssid */
 229         ieee80211_iterate_active_interfaces_atomic(
 230                 rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
 231                 rt2x00lib_bc_buffer_iter, rt2x00dev);
 232         /*
 233          * Devices with pre tbtt interrupt don't need to update the beacon
 234          * here as they will fetch the next beacon directly prior to
 235          * transmission.
 236          */
 237         if (test_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags))
 238                 return;
 239
 240         /* fetch next beacon */
 241         ieee80211_iterate_active_interfaces_atomic(
 242                 rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
 243                 rt2x00lib_beaconupdate_iter, rt2x00dev);
 244 }
 245 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
 246
 247 void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev)
 248 {
 249         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 250                 return;
 251
 252         /* fetch next beacon */
 253         ieee80211_iterate_active_interfaces_atomic(
 254                 rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
 255                 rt2x00lib_beaconupdate_iter, rt2x00dev);
 256 }
 257 EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
 258
 259 void rt2x00lib_dmastart(struct queue_entry *entry)
 260 {
 261         set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 262         rt2x00queue_index_inc(entry, Q_INDEX);
 263 }
 264 EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
 265
 266 void rt2x00lib_dmadone(struct queue_entry *entry)
 267 {
 268         set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
 269         clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 270         rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE);
 271 }
 272 EXPORT_SYMBOL_GPL(rt2x00lib_dmadone);
 273
 274 static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry)
 275 {
 276         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 277         struct ieee80211_bar *bar = (void *) entry->skb->data;
 278         struct rt2x00_bar_list_entry *bar_entry;
 279         int ret;
 280
 281         if (likely(!ieee80211_is_back_req(bar->frame_control)))
 282                 return 0;
 283
 284         /*
 285          * Unlike all other frames, the status report for BARs does
 286          * not directly come from the hardware as it is incapable of
 287          * matching a BA to a previously send BAR. The hardware will
 288          * report all BARs as if they weren't acked at all.
 289          *
 290          * Instead the RX-path will scan for incoming BAs and set the
 291          * block_acked flag if it sees one that was likely caused by
 292          * a BAR from us.
 293          *
 294          * Remove remaining BARs here and return their status for
 295          * TX done processing.
 296          */
 297         ret = 0;
 298         rcu_read_lock();
 299         list_for_each_entry_rcu(bar_entry, &rt2x00dev->bar_list, list) {
 300                 if (bar_entry->entry != entry)
 301                         continue;
 302
 303                 spin_lock_bh(&rt2x00dev->bar_list_lock);
 304                 /* Return whether this BAR was blockacked or not */
 305                 ret = bar_entry->block_acked;
 306                 /* Remove the BAR from our checklist */
 307                 list_del_rcu(&bar_entry->list);
 308                 spin_unlock_bh(&rt2x00dev->bar_list_lock);
 309                 kfree_rcu(bar_entry, head);
 310
 311                 break;
 312         }
 313         rcu_read_unlock();
 314
 315         return ret;
 316 }
 317
 318 void rt2x00lib_txdone(struct queue_entry *entry,
 319                       struct txdone_entry_desc *txdesc)
 320 {
 321         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 322         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 323         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 324         unsigned int header_length, i;
 325         u8 rate_idx, rate_flags, retry_rates;
 326         u8 skbdesc_flags = skbdesc->flags;
 327         bool success;
 328
 329         /*
 330          * Unmap the skb.
 331          */
 332         rt2x00queue_unmap_skb(entry);
 333
 334         /*
 335          * Remove the extra tx headroom from the skb.
 336          */
 337         skb_pull(entry->skb, rt2x00dev->ops->extra_tx_headroom);
 338
 339         /*
 340          * Signal that the TX descriptor is no longer in the skb.
 341          */
 342         skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
 343
 344         /*
 345          * Determine the length of 802.11 header.
 346          */
 347         header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 348
 349         /*
 350          * Remove L2 padding which was added during
 351          */
 352         if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags))
 353                 rt2x00queue_remove_l2pad(entry->skb, header_length);
 354
 355         /*
 356          * If the IV/EIV data was stripped from the frame before it was
 357          * passed to the hardware, we should now reinsert it again because
 358          * mac80211 will expect the same data to be present it the
 359          * frame as it was passed to us.
 360          */
 361         if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags))
 362                 rt2x00crypto_tx_insert_iv(entry->skb, header_length);
 363
 364         /*
 365          * Send frame to debugfs immediately, after this call is completed
 366          * we are going to overwrite the skb->cb array.
 367          */
 368         rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
 369
 370         /*
 371          * Determine if the frame has been successfully transmitted and
 372          * remove BARs from our check list while checking for their
 373          * TX status.
 374          */
 375         success =
 376             rt2x00lib_txdone_bar_status(entry) ||
 377             test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
 378             test_bit(TXDONE_UNKNOWN, &txdesc->flags);
 379
 380         /*
 381          * Update TX statistics.
 382          */
 383         rt2x00dev->link.qual.tx_success += success;
 384         rt2x00dev->link.qual.tx_failed += !success;
 385
 386         rate_idx = skbdesc->tx_rate_idx;
 387         rate_flags = skbdesc->tx_rate_flags;
 388         retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ?
 389             (txdesc->retry + 1) : 1;
 390
 391         /*
 392          * Initialize TX status
 393          */
 394         memset(&tx_info->status, 0, sizeof(tx_info->status));
 395         tx_info->status.ack_signal = 0;
 396
 397         /*
 398          * Frame was send with retries, hardware tried
 399          * different rates to send out the frame, at each
 400          * retry it lowered the rate 1 step except when the
 401          * lowest rate was used.
 402          */
 403         for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
 404                 tx_info->status.rates[i].idx = rate_idx - i;
 405                 tx_info->status.rates[i].flags = rate_flags;
 406
 407                 if (rate_idx - i == 0) {
 408                         /*
 409                          * The lowest rate (index 0) was used until the
 410                          * number of max retries was reached.
 411                          */
 412                         tx_info->status.rates[i].count = retry_rates - i;
 413                         i++;
 414                         break;
 415                 }
 416                 tx_info->status.rates[i].count = 1;
 417         }
 418         if (i < (IEEE80211_TX_MAX_RATES - 1))
 419                 tx_info->status.rates[i].idx = -1; /* terminate */
 420
 421         if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 422                 if (success)
 423                         tx_info->flags |= IEEE80211_TX_STAT_ACK;
 424                 else
 425                         rt2x00dev->low_level_stats.dot11ACKFailureCount++;
 426         }
 427
 428         /*
 429          * Every single frame has it's own tx status, hence report
 430          * every frame as ampdu of size 1.
 431          *
 432          * TODO: if we can find out how many frames were aggregated
 433          * by the hw we could provide the real ampdu_len to mac80211
 434          * which would allow the rc algorithm to better decide on
 435          * which rates are suitable.
 436          */
 437         if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
 438             tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
 439                 tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
 440                 tx_info->status.ampdu_len = 1;
 441                 tx_info->status.ampdu_ack_len = success ? 1 : 0;
 442
 443                 if (!success)
 444                         tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
 445         }
 446
 447         if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 448                 if (success)
 449                         rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
 450                 else
 451                         rt2x00dev->low_level_stats.dot11RTSFailureCount++;
 452         }
 453
 454         /*
 455          * Only send the status report to mac80211 when it's a frame
 456          * that originated in mac80211. If this was a extra frame coming
 457          * through a mac80211 library call (RTS/CTS) then we should not
 458          * send the status report back.
 459          */
 460         if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
 461                 if (test_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags))
 462                         ieee80211_tx_status(rt2x00dev->hw, entry->skb);
 463                 else
 464                         ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
 465         } else
 466                 dev_kfree_skb_any(entry->skb);
 467
 468         /*
 469          * Make this entry available for reuse.
 470          */
 471         entry->skb = NULL;
 472         entry->flags = 0;
 473
 474         rt2x00dev->ops->lib->clear_entry(entry);
 475
 476         rt2x00queue_index_inc(entry, Q_INDEX_DONE);
 477
 478         /*
 479          * If the data queue was below the threshold before the txdone
 480          * handler we must make sure the packet queue in the mac80211 stack
 481          * is reenabled when the txdone handler has finished. This has to be
 482          * serialized with rt2x00mac_tx(), otherwise we can wake up queue
 483          * before it was stopped.
 484          */
 485         spin_lock_bh(&entry->queue->tx_lock);
 486         if (!rt2x00queue_threshold(entry->queue))
 487                 rt2x00queue_unpause_queue(entry->queue);
 488         spin_unlock_bh(&entry->queue->tx_lock);
 489 }
 490 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 491
 492 void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
 493 {
 494         struct txdone_entry_desc txdesc;
 495
 496         txdesc.flags = 0;
 497         __set_bit(status, &txdesc.flags);
 498         txdesc.retry = 0;
 499
 500         rt2x00lib_txdone(entry, &txdesc);
 501 }
 502 EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
 503
 504 static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
 505 {
 506         struct ieee80211_mgmt *mgmt = (void *)data;
 507         u8 *pos, *end;
 508
 509         pos = (u8 *)mgmt->u.beacon.variable;
 510         end = data + len;
 511         while (pos < end) {
 512                 if (pos + 2 + pos[1] > end)
 513                         return NULL;
 514
 515                 if (pos[0] == ie)
 516                         return pos;
 517
 518                 pos += 2 + pos[1];
 519         }
 520
 521         return NULL;
 522 }
 523
 524 static void rt2x00lib_sleep(struct work_struct *work)
 525 {
 526         struct rt2x00_dev *rt2x00dev =
 527             container_of(work, struct rt2x00_dev, sleep_work);
 528
 529         if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 530                 return;
 531
 532         /*
 533          * Check again is powersaving is enabled, to prevent races from delayed
 534          * work execution.
 535          */
 536         if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
 537                 rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
 538                                  IEEE80211_CONF_CHANGE_PS);
 539 }
 540
 541 static void rt2x00lib_rxdone_check_ba(struct rt2x00_dev *rt2x00dev,
 542                                       struct sk_buff *skb,
 543                                       struct rxdone_entry_desc *rxdesc)
 544 {
 545         struct rt2x00_bar_list_entry *entry;
 546         struct ieee80211_bar *ba = (void *)skb->data;
 547
 548         if (likely(!ieee80211_is_back(ba->frame_control)))
 549                 return;
 550
 551         if (rxdesc->size < sizeof(*ba) + FCS_LEN)
 552                 return;
 553
 554         rcu_read_lock();
 555         list_for_each_entry_rcu(entry, &rt2x00dev->bar_list, list) {
 556
 557                 if (ba->start_seq_num != entry->start_seq_num)
 558                         continue;
 559
 560 #define TID_CHECK(a, b) (                                               \
 561         ((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) ==        \
 562         ((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)))          \
 563
 564                 if (!TID_CHECK(ba->control, entry->control))
 565                         continue;
 566
 567 #undef TID_CHECK
 568
 569                 if (compare_ether_addr(ba->ra, entry->ta))
 570                         continue;
 571
 572                 if (compare_ether_addr(ba->ta, entry->ra))
 573                         continue;
 574
 575                 /* Mark BAR since we received the according BA */
 576                 spin_lock_bh(&rt2x00dev->bar_list_lock);
 577                 entry->block_acked = 1;
 578                 spin_unlock_bh(&rt2x00dev->bar_list_lock);
 579                 break;
 580         }
 581         rcu_read_unlock();
 582
 583 }
 584
 585 static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
 586                                       struct sk_buff *skb,
 587                                       struct rxdone_entry_desc *rxdesc)
 588 {
 589         struct ieee80211_hdr *hdr = (void *) skb->data;
 590         struct ieee80211_tim_ie *tim_ie;
 591         u8 *tim;
 592         u8 tim_len;
 593         bool cam;
 594
 595         /* If this is not a beacon, or if mac80211 has no powersaving
 596          * configured, or if the device is already in powersaving mode
 597          * we can exit now. */
 598         if (likely(!ieee80211_is_beacon(hdr->frame_control) ||
 599                    !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS)))
 600                 return;
 601
 602         /* min. beacon length + FCS_LEN */
 603         if (skb->len <= 40 + FCS_LEN)
 604                 return;
 605
 606         /* and only beacons from the associated BSSID, please */
 607         if (!(rxdesc->dev_flags & RXDONE_MY_BSS) ||
 608             !rt2x00dev->aid)
 609                 return;
 610
 611         rt2x00dev->last_beacon = jiffies;
 612
 613         tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM);
 614         if (!tim)
 615                 return;
 616
 617         if (tim[1] < sizeof(*tim_ie))
 618                 return;
 619
 620         tim_len = tim[1];
 621         tim_ie = (struct ieee80211_tim_ie *) &tim[2];
 622
 623         /* Check whenever the PHY can be turned off again. */
 624
 625         /* 1. What about buffered unicast traffic for our AID? */
 626         cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid);
 627
 628         /* 2. Maybe the AP wants to send multicast/broadcast data? */
 629         cam |= (tim_ie->bitmap_ctrl & 0x01);
 630
 631         if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
 632                 queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
 633 }
 634
 635 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
 636                                         struct rxdone_entry_desc *rxdesc)
 637 {
 638         struct ieee80211_supported_band *sband;
 639         const struct rt2x00_rate *rate;
 640         unsigned int i;
 641         int signal = rxdesc->signal;
 642         int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
 643
 644         switch (rxdesc->rate_mode) {
 645         case RATE_MODE_CCK:
 646         case RATE_MODE_OFDM:
 647                 /*
 648                  * For non-HT rates the MCS value needs to contain the
 649                  * actually used rate modulation (CCK or OFDM).
 650                  */
 651                 if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
 652                         signal = RATE_MCS(rxdesc->rate_mode, signal);
 653
 654                 sband = &rt2x00dev->bands[rt2x00dev->curr_band];
 655                 for (i = 0; i < sband->n_bitrates; i++) {
 656                         rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
 657                         if (((type == RXDONE_SIGNAL_PLCP) &&
 658                              (rate->plcp == signal)) ||
 659                             ((type == RXDONE_SIGNAL_BITRATE) &&
 660                               (rate->bitrate == signal)) ||
 661                             ((type == RXDONE_SIGNAL_MCS) &&
 662                               (rate->mcs == signal))) {
 663                                 return i;
 664                         }
 665                 }
 666                 break;
 667         case RATE_MODE_HT_MIX:
 668         case RATE_MODE_HT_GREENFIELD:
 669                 if (signal >= 0 && signal <= 76)
 670                         return signal;
 671                 break;
 672         default:
 673                 break;
 674         }
 675
 676         WARNING(rt2x00dev, "Frame received with unrecognized signal, "
 677                 "mode=0x%.4x, signal=0x%.4x, type=%d.\n",
 678                 rxdesc->rate_mode, signal, type);
 679         return 0;
 680 }
 681
 682 void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
 683 {
 684         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 685         struct rxdone_entry_desc rxdesc;
 686         struct sk_buff *skb;
 687         struct ieee80211_rx_status *rx_status;
 688         unsigned int header_length;
 689         int rate_idx;
 690
 691         if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
 692             !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 693                 goto submit_entry;
 694
 695         if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 696                 goto submit_entry;
 697
 698         /*
 699          * Allocate a new sk_buffer. If no new buffer available, drop the
 700          * received frame and reuse the existing buffer.
 701          */
 702         skb = rt2x00queue_alloc_rxskb(entry, gfp);
 703         if (!skb)
 704                 goto submit_entry;
 705
 706         /*
 707          * Unmap the skb.
 708          */
 709         rt2x00queue_unmap_skb(entry);
 710
 711         /*
 712          * Extract the RXD details.
 713          */
 714         memset(&rxdesc, 0, sizeof(rxdesc));
 715         rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
 716
 717         /*
 718          * Check for valid size in case we get corrupted descriptor from
 719          * hardware.
 720          */
 721         if (unlikely(rxdesc.size == 0 ||
 722                      rxdesc.size > entry->queue->data_size)) {
 723                 ERROR(rt2x00dev, "Wrong frame size %d max %d.\n",
 724                         rxdesc.size, entry->queue->data_size);
 725                 dev_kfree_skb(entry->skb);
 726                 goto renew_skb;
 727         }
 728
 729         /*
 730          * The data behind the ieee80211 header must be
 731          * aligned on a 4 byte boundary.
 732          */
 733         header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 734
 735         /*
 736          * Hardware might have stripped the IV/EIV/ICV data,
 737          * in that case it is possible that the data was
 738          * provided separately (through hardware descriptor)
 739          * in which case we should reinsert the data into the frame.
 740          */
 741         if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
 742             (rxdesc.flags & RX_FLAG_IV_STRIPPED))
 743                 rt2x00crypto_rx_insert_iv(entry->skb, header_length,
 744                                           &rxdesc);
 745         else if (header_length &&
 746                  (rxdesc.size > header_length) &&
 747                  (rxdesc.dev_flags & RXDONE_L2PAD))
 748                 rt2x00queue_remove_l2pad(entry->skb, header_length);
 749
 750         /* Trim buffer to correct size */
 751         skb_trim(entry->skb, rxdesc.size);
 752
 753         /*
 754          * Translate the signal to the correct bitrate index.
 755          */
 756         rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
 757         if (rxdesc.rate_mode == RATE_MODE_HT_MIX ||
 758             rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD)
 759                 rxdesc.flags |= RX_FLAG_HT;
 760
 761         /*
 762          * Check if this is a beacon, and more frames have been
 763          * buffered while we were in powersaving mode.
 764          */
 765         rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc);
 766
 767         /*
 768          * Check for incoming BlockAcks to match to the BlockAckReqs
 769          * we've send out.
 770          */
 771         rt2x00lib_rxdone_check_ba(rt2x00dev, entry->skb, &rxdesc);
 772
 773         /*
 774          * Update extra components
 775          */
 776         rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
 777         rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
 778         rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
 779
 780         /*
 781          * Initialize RX status information, and send frame
 782          * to mac80211.
 783          */
 784         rx_status = IEEE80211_SKB_RXCB(entry->skb);
 785
 786         /* Ensure that all fields of rx_status are initialized
 787          * properly. The skb->cb array was used for driver
 788          * specific informations, so rx_status might contain
 789          * garbage.
 790          */
 791         memset(rx_status, 0, sizeof(*rx_status));
 792
 793         rx_status->mactime = rxdesc.timestamp;
 794         rx_status->band = rt2x00dev->curr_band;
 795         rx_status->freq = rt2x00dev->curr_freq;
 796         rx_status->rate_idx = rate_idx;
 797         rx_status->signal = rxdesc.rssi;
 798         rx_status->flag = rxdesc.flags;
 799         rx_status->antenna = rt2x00dev->link.ant.active.rx;
 800
 801         ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
 802
 803 renew_skb:
 804         /*
 805          * Replace the skb with the freshly allocated one.
 806          */
 807         entry->skb = skb;
 808
 809 submit_entry:
 810         entry->flags = 0;
 811         rt2x00queue_index_inc(entry, Q_INDEX_DONE);
 812         if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
 813             test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 814                 rt2x00dev->ops->lib->clear_entry(entry);
 815 }
 816 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
 817
 818 /*
 819  * Driver initialization handlers.
 820  */
 821 const struct rt2x00_rate rt2x00_supported_rates[12] = {
 822         {
 823                 .flags = DEV_RATE_CCK,
 824                 .bitrate = 10,
 825                 .ratemask = BIT(0),
 826                 .plcp = 0x00,
 827                 .mcs = RATE_MCS(RATE_MODE_CCK, 0),
 828         },
 829         {
 830                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 831                 .bitrate = 20,
 832                 .ratemask = BIT(1),
 833                 .plcp = 0x01,
 834                 .mcs = RATE_MCS(RATE_MODE_CCK, 1),
 835         },
 836         {
 837                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 838                 .bitrate = 55,
 839                 .ratemask = BIT(2),
 840                 .plcp = 0x02,
 841                 .mcs = RATE_MCS(RATE_MODE_CCK, 2),
 842         },
 843         {
 844                 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 845                 .bitrate = 110,
 846                 .ratemask = BIT(3),
 847                 .plcp = 0x03,
 848                 .mcs = RATE_MCS(RATE_MODE_CCK, 3),
 849         },
 850         {
 851                 .flags = DEV_RATE_OFDM,
 852                 .bitrate = 60,
 853                 .ratemask = BIT(4),
 854                 .plcp = 0x0b,
 855                 .mcs = RATE_MCS(RATE_MODE_OFDM, 0),
 856         },
 857         {
 858                 .flags = DEV_RATE_OFDM,
 859                 .bitrate = 90,
 860                 .ratemask = BIT(5),
 861                 .plcp = 0x0f,
 862                 .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
 863         },
 864         {
 865                 .flags = DEV_RATE_OFDM,
 866                 .bitrate = 120,
 867                 .ratemask = BIT(6),
 868                 .plcp = 0x0a,
 869                 .mcs = RATE_MCS(RATE_MODE_OFDM, 2),
 870         },
 871         {
 872                 .flags = DEV_RATE_OFDM,
 873                 .bitrate = 180,
 874                 .ratemask = BIT(7),
 875                 .plcp = 0x0e,
 876                 .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
 877         },
 878         {
 879                 .flags = DEV_RATE_OFDM,
 880                 .bitrate = 240,
 881                 .ratemask = BIT(8),
 882                 .plcp = 0x09,
 883                 .mcs = RATE_MCS(RATE_MODE_OFDM, 4),
 884         },
 885         {
 886                 .flags = DEV_RATE_OFDM,
 887                 .bitrate = 360,
 888                 .ratemask = BIT(9),
 889                 .plcp = 0x0d,
 890                 .mcs = RATE_MCS(RATE_MODE_OFDM, 5),
 891         },
 892         {
 893                 .flags = DEV_RATE_OFDM,
 894                 .bitrate = 480,
 895                 .ratemask = BIT(10),
 896                 .plcp = 0x08,
 897                 .mcs = RATE_MCS(RATE_MODE_OFDM, 6),
 898         },
 899         {
 900                 .flags = DEV_RATE_OFDM,
 901                 .bitrate = 540,
 902                 .ratemask = BIT(11),
 903                 .plcp = 0x0c,
 904                 .mcs = RATE_MCS(RATE_MODE_OFDM, 7),
 905         },
 906 };
 907
 908 static void rt2x00lib_channel(struct ieee80211_channel *entry,
 909                               const int channel, const int tx_power,
 910                               const int value)
 911 {
 912         /* XXX: this assumption about the band is wrong for 802.11j */
 913         entry->band = channel <= 14 ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 914         entry->center_freq = ieee80211_channel_to_frequency(channel,
 915                                                             entry->band);
 916         entry->hw_value = value;
 917         entry->max_power = tx_power;
 918         entry->max_antenna_gain = 0xff;
 919 }
 920
 921 static void rt2x00lib_rate(struct ieee80211_rate *entry,
 922                            const u16 index, const struct rt2x00_rate *rate)
 923 {
 924         entry->flags = 0;
 925         entry->bitrate = rate->bitrate;
 926         entry->hw_value = index;
 927         entry->hw_value_short = index;
 928
 929         if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
 930                 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
 931 }
 932
 933 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 934                                     struct hw_mode_spec *spec)
 935 {
 936         struct ieee80211_hw *hw = rt2x00dev->hw;
 937         struct ieee80211_channel *channels;
 938         struct ieee80211_rate *rates;
 939         unsigned int num_rates;
 940         unsigned int i;
 941
 942         num_rates = 0;
 943         if (spec->supported_rates & SUPPORT_RATE_CCK)
 944                 num_rates += 4;
 945         if (spec->supported_rates & SUPPORT_RATE_OFDM)
 946                 num_rates += 8;
 947
 948         channels = kcalloc(spec->num_channels, sizeof(*channels), GFP_KERNEL);
 949         if (!channels)
 950                 return -ENOMEM;
 951
 952         rates = kcalloc(num_rates, sizeof(*rates), GFP_KERNEL);
 953         if (!rates)
 954                 goto exit_free_channels;
 955
 956         /*
 957          * Initialize Rate list.
 958          */
 959         for (i = 0; i < num_rates; i++)
 960                 rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
 961
 962         /*
 963          * Initialize Channel list.
 964          */
 965         for (i = 0; i < spec->num_channels; i++) {
 966                 rt2x00lib_channel(&channels[i],
 967                                   spec->channels[i].channel,
 968                                   spec->channels_info[i].max_power, i);
 969         }
 970
 971         /*
 972          * Intitialize 802.11b, 802.11g
 973          * Rates: CCK, OFDM.
 974          * Channels: 2.4 GHz
 975          */
 976         if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
 977                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
 978                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
 979                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
 980                 rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
 981                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 982                     &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
 983                 memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
 984                        &spec->ht, sizeof(spec->ht));
 985         }
 986
 987         /*
 988          * Intitialize 802.11a
 989          * Rates: OFDM.
 990          * Channels: OFDM, UNII, HiperLAN2.
 991          */
 992         if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
 993                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
 994                     spec->num_channels - 14;
 995                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
 996                     num_rates - 4;
 997                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
 998                 rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
 999                 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
1000                     &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
1001                 memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
1002                        &spec->ht, sizeof(spec->ht));
1003         }
1004
1005         return 0;
1006
1007  exit_free_channels:
1008         kfree(channels);
1009         ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
1010         return -ENOMEM;
1011 }
1012
1013 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
1014 {
1015         if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
1016                 ieee80211_unregister_hw(rt2x00dev->hw);
1017
1018         if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
1019                 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
1020                 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates);
1021                 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
1022                 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
1023         }
1024
1025         kfree(rt2x00dev->spec.channels_info);
1026 }
1027
1028 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
1029 {
1030         struct hw_mode_spec *spec = &rt2x00dev->spec;
1031         int status;
1032
1033         if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
1034                 return 0;
1035
1036         /*
1037          * Initialize HW modes.
1038          */
1039         status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
1040         if (status)
1041                 return status;
1042
1043         /*
1044          * Initialize HW fields.
1045          */
1046         rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
1047
1048         /*
1049          * Initialize extra TX headroom required.
1050          */
1051         rt2x00dev->hw->extra_tx_headroom =
1052                 max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
1053                       rt2x00dev->ops->extra_tx_headroom);
1054
1055         /*
1056          * Take TX headroom required for alignment into account.
1057          */
1058         if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags))
1059                 rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
1060         else if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags))
1061                 rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
1062
1063         /*
1064          * Tell mac80211 about the size of our private STA structure.
1065          */
1066         rt2x00dev->hw->sta_data_size = sizeof(struct rt2x00_sta);
1067
1068         /*
1069          * Allocate tx status FIFO for driver use.
1070          */
1071         if (test_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags)) {
1072                 /*
1073                  * Allocate the txstatus fifo. In the worst case the tx
1074                  * status fifo has to hold the tx status of all entries
1075                  * in all tx queues. Hence, calculate the kfifo size as
1076                  * tx_queues * entry_num and round up to the nearest
1077                  * power of 2.
1078                  */
1079                 int kfifo_size =
1080                         roundup_pow_of_two(rt2x00dev->ops->tx_queues *
1081                                            rt2x00dev->ops->tx->entry_num *
1082                                            sizeof(u32));
1083
1084                 status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size,
1085                                      GFP_KERNEL);
1086                 if (status)
1087                         return status;
1088         }
1089
1090         /*
1091          * Initialize tasklets if used by the driver. Tasklets are
1092          * disabled until the interrupts are turned on. The driver
1093          * has to handle that.
1094          */
1095 #define RT2X00_TASKLET_INIT(taskletname) \
1096         if (rt2x00dev->ops->lib->taskletname) { \
1097                 tasklet_init(&rt2x00dev->taskletname, \
1098                              rt2x00dev->ops->lib->taskletname, \
1099                              (unsigned long)rt2x00dev); \
1100         }
1101
1102         RT2X00_TASKLET_INIT(txstatus_tasklet);
1103         RT2X00_TASKLET_INIT(pretbtt_tasklet);
1104         RT2X00_TASKLET_INIT(tbtt_tasklet);
1105         RT2X00_TASKLET_INIT(rxdone_tasklet);
1106         RT2X00_TASKLET_INIT(autowake_tasklet);
1107
1108 #undef RT2X00_TASKLET_INIT
1109
1110         /*
1111          * Register HW.
1112          */
1113         status = ieee80211_register_hw(rt2x00dev->hw);
1114         if (status)
1115                 return status;
1116
1117         set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
1118
1119         return 0;
1120 }
1121
1122 /*
1123  * Initialization/uninitialization handlers.
1124  */
1125 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
1126 {
1127         if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
1128                 return;
1129
1130         /*
1131          * Unregister extra components.
1132          */
1133         rt2x00rfkill_unregister(rt2x00dev);
1134
1135         /*
1136          * Allow the HW to uninitialize.
1137          */
1138         rt2x00dev->ops->lib->uninitialize(rt2x00dev);
1139
1140         /*
1141          * Free allocated queue entries.
1142          */
1143         rt2x00queue_uninitialize(rt2x00dev);
1144 }
1145
1146 static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
1147 {
1148         int status;
1149
1150         if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
1151                 return 0;
1152
1153         /*
1154          * Allocate all queue entries.
1155          */
1156         status = rt2x00queue_initialize(rt2x00dev);
1157         if (status)
1158                 return status;
1159
1160         /*
1161          * Initialize the device.
1162          */
1163         status = rt2x00dev->ops->lib->initialize(rt2x00dev);
1164         if (status) {
1165                 rt2x00queue_uninitialize(rt2x00dev);
1166                 return status;
1167         }
1168
1169         set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
1170
1171         return 0;
1172 }
1173
1174 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
1175 {
1176         int retval;
1177
1178         if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
1179                 return 0;
1180
1181         /*
1182          * If this is the first interface which is added,
1183          * we should load the firmware now.
1184          */
1185         retval = rt2x00lib_load_firmware(rt2x00dev);
1186         if (retval)
1187                 return retval;
1188
1189         /*
1190          * Initialize the device.
1191          */
1192         retval = rt2x00lib_initialize(rt2x00dev);
1193         if (retval)
1194                 return retval;
1195
1196         rt2x00dev->intf_ap_count = 0;
1197         rt2x00dev->intf_sta_count = 0;
1198         rt2x00dev->intf_associated = 0;
1199
1200         /* Enable the radio */
1201         retval = rt2x00lib_enable_radio(rt2x00dev);
1202         if (retval)
1203                 return retval;
1204
1205         set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
1206
1207         return 0;
1208 }
1209
1210 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
1211 {
1212         if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
1213                 return;
1214
1215         /*
1216          * Perhaps we can add something smarter here,
1217          * but for now just disabling the radio should do.
1218          */
1219         rt2x00lib_disable_radio(rt2x00dev);
1220
1221         rt2x00dev->intf_ap_count = 0;
1222         rt2x00dev->intf_sta_count = 0;
1223         rt2x00dev->intf_associated = 0;
1224 }
1225
1226 static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev)
1227 {
1228         struct ieee80211_iface_limit *if_limit;
1229         struct ieee80211_iface_combination *if_combination;
1230
1231         if (rt2x00dev->ops->max_ap_intf < 2)
1232                 return;
1233
1234         /*
1235          * Build up AP interface limits structure.
1236          */
1237         if_limit = &rt2x00dev->if_limits_ap;
1238         if_limit->max = rt2x00dev->ops->max_ap_intf;
1239         if_limit->types = BIT(NL80211_IFTYPE_AP);
1240
1241         /*
1242          * Build up AP interface combinations structure.
1243          */
1244         if_combination = &rt2x00dev->if_combinations[IF_COMB_AP];
1245         if_combination->limits = if_limit;
1246         if_combination->n_limits = 1;
1247         if_combination->max_interfaces = if_limit->max;
1248         if_combination->num_different_channels = 1;
1249
1250         /*
1251          * Finally, specify the possible combinations to mac80211.
1252          */
1253         rt2x00dev->hw->wiphy->iface_combinations = rt2x00dev->if_combinations;
1254         rt2x00dev->hw->wiphy->n_iface_combinations = 1;
1255 }
1256
1257 /*
1258  * driver allocation handlers.
1259  */
1260 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
1261 {
1262         int retval = -ENOMEM;
1263
1264         /*
1265          * Set possible interface combinations.
1266          */
1267         rt2x00lib_set_if_combinations(rt2x00dev);
1268
1269         /*
1270          * Allocate the driver data memory, if necessary.
1271          */
1272         if (rt2x00dev->ops->drv_data_size > 0) {
1273                 rt2x00dev->drv_data = kzalloc(rt2x00dev->ops->drv_data_size,
1274                                               GFP_KERNEL);
1275                 if (!rt2x00dev->drv_data) {
1276                         retval = -ENOMEM;
1277                         goto exit;
1278                 }
1279         }
1280
1281         spin_lock_init(&rt2x00dev->irqmask_lock);
1282         mutex_init(&rt2x00dev->csr_mutex);
1283         INIT_LIST_HEAD(&rt2x00dev->bar_list);
1284         spin_lock_init(&rt2x00dev->bar_list_lock);
1285
1286         set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1287
1288         /*
1289          * Make room for rt2x00_intf inside the per-interface
1290          * structure ieee80211_vif.
1291          */
1292         rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
1293
1294         /*
1295          * rt2x00 devices can only use the last n bits of the MAC address
1296          * for virtual interfaces.
1297          */
1298         rt2x00dev->hw->wiphy->addr_mask[ETH_ALEN - 1] =
1299                 (rt2x00dev->ops->max_ap_intf - 1);
1300
1301         /*
1302          * Determine which operating modes are supported, all modes
1303          * which require beaconing, depend on the availability of
1304          * beacon entries.
1305          */
1306         rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
1307         if (rt2x00dev->ops->bcn->entry_num > 0)
1308                 rt2x00dev->hw->wiphy->interface_modes |=
1309                     BIT(NL80211_IFTYPE_ADHOC) |
1310                     BIT(NL80211_IFTYPE_AP) |
1311                     BIT(NL80211_IFTYPE_MESH_POINT) |
1312                     BIT(NL80211_IFTYPE_WDS);
1313
1314         rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
1315
1316         /*
1317          * Initialize work.
1318          */
1319         rt2x00dev->workqueue =
1320             alloc_ordered_workqueue(wiphy_name(rt2x00dev->hw->wiphy), 0);
1321         if (!rt2x00dev->workqueue) {
1322                 retval = -ENOMEM;
1323                 goto exit;
1324         }
1325
1326         INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
1327         INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
1328         INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
1329
1330         /*
1331          * Let the driver probe the device to detect the capabilities.
1332          */
1333         retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
1334         if (retval) {
1335                 ERROR(rt2x00dev, "Failed to allocate device.\n");
1336                 goto exit;
1337         }
1338
1339         /*
1340          * Allocate queue array.
1341          */
1342         retval = rt2x00queue_allocate(rt2x00dev);
1343         if (retval)
1344                 goto exit;
1345
1346         /*
1347          * Initialize ieee80211 structure.
1348          */
1349         retval = rt2x00lib_probe_hw(rt2x00dev);
1350         if (retval) {
1351                 ERROR(rt2x00dev, "Failed to initialize hw.\n");
1352                 goto exit;
1353         }
1354
1355         /*
1356          * Register extra components.
1357          */
1358         rt2x00link_register(rt2x00dev);
1359         rt2x00leds_register(rt2x00dev);
1360         rt2x00debug_register(rt2x00dev);
1361         rt2x00rfkill_register(rt2x00dev);
1362
1363         return 0;
1364
1365 exit:
1366         rt2x00lib_remove_dev(rt2x00dev);
1367
1368         return retval;
1369 }
1370 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
1371
1372 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
1373 {
1374         clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1375
1376         /*
1377          * Disable radio.
1378          */
1379         rt2x00lib_disable_radio(rt2x00dev);
1380
1381         /*
1382          * Stop all work.
1383          */
1384         cancel_work_sync(&rt2x00dev->intf_work);
1385         cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
1386         cancel_work_sync(&rt2x00dev->sleep_work);
1387         if (rt2x00_is_usb(rt2x00dev)) {
1388                 hrtimer_cancel(&rt2x00dev->txstatus_timer);
1389                 cancel_work_sync(&rt2x00dev->rxdone_work);
1390                 cancel_work_sync(&rt2x00dev->txdone_work);
1391         }
1392         if (rt2x00dev->workqueue)
1393                 destroy_workqueue(rt2x00dev->workqueue);
1394
1395         /*
1396          * Free the tx status fifo.
1397          */
1398         kfifo_free(&rt2x00dev->txstatus_fifo);
1399
1400         /*
1401          * Kill the tx status tasklet.
1402          */
1403         tasklet_kill(&rt2x00dev->txstatus_tasklet);
1404         tasklet_kill(&rt2x00dev->pretbtt_tasklet);
1405         tasklet_kill(&rt2x00dev->tbtt_tasklet);
1406         tasklet_kill(&rt2x00dev->rxdone_tasklet);
1407         tasklet_kill(&rt2x00dev->autowake_tasklet);
1408
1409         /*
1410          * Uninitialize device.
1411          */
1412         rt2x00lib_uninitialize(rt2x00dev);
1413
1414         /*
1415          * Free extra components
1416          */
1417         rt2x00debug_deregister(rt2x00dev);
1418         rt2x00leds_unregister(rt2x00dev);
1419
1420         /*
1421          * Free ieee80211_hw memory.
1422          */
1423         rt2x00lib_remove_hw(rt2x00dev);
1424
1425         /*
1426          * Free firmware image.
1427          */
1428         rt2x00lib_free_firmware(rt2x00dev);
1429
1430         /*
1431          * Free queue structures.
1432          */
1433         rt2x00queue_free(rt2x00dev);
1434
1435         /*
1436          * Free the driver data.
1437          */
1438         if (rt2x00dev->drv_data)
1439                 kfree(rt2x00dev->drv_data);
1440 }
1441 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
1442
1443 /*
1444  * Device state handlers
1445  */
1446 #ifdef CONFIG_PM
1447 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
1448 {
1449         DEBUG(rt2x00dev, "Going to sleep.\n");
1450
1451         /*
1452          * Prevent mac80211 from accessing driver while suspended.
1453          */
1454         if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
1455                 return 0;
1456
1457         /*
1458          * Cleanup as much as possible.
1459          */
1460         rt2x00lib_uninitialize(rt2x00dev);
1461
1462         /*
1463          * Suspend/disable extra components.
1464          */
1465         rt2x00leds_suspend(rt2x00dev);
1466         rt2x00debug_deregister(rt2x00dev);
1467
1468         /*
1469          * Set device mode to sleep for power management,
1470          * on some hardware this call seems to consistently fail.
1471          * From the specifications it is hard to tell why it fails,
1472          * and if this is a "bad thing".
1473          * Overall it is safe to just ignore the failure and
1474          * continue suspending. The only downside is that the
1475          * device will not be in optimal power save mode, but with
1476          * the radio and the other components already disabled the
1477          * device is as good as disabled.
1478          */
1479         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP))
1480                 WARNING(rt2x00dev, "Device failed to enter sleep state, "
1481                         "continue suspending.\n");
1482
1483         return 0;
1484 }
1485 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
1486
1487 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
1488 {
1489         DEBUG(rt2x00dev, "Waking up.\n");
1490
1491         /*
1492          * Restore/enable extra components.
1493          */
1494         rt2x00debug_register(rt2x00dev);
1495         rt2x00leds_resume(rt2x00dev);
1496
1497         /*
1498          * We are ready again to receive requests from mac80211.
1499          */
1500         set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1501
1502         return 0;
1503 }
1504 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
1505 #endif /* CONFIG_PM */
1506
1507 /*
1508  * rt2x00lib module information.
1509  */
1510 MODULE_AUTHOR(DRV_PROJECT);
1511 MODULE_VERSION(DRV_VERSION);
1512 MODULE_DESCRIPTION("rt2x00 library");
1513 MODULE_LICENSE("GPL");