aa225be8dee893b38950c21c47cb04a36b1dde11
[pandora-kernel.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26 /*
27  * Please use this file (iwl-dev.h) for driver implementation definitions.
28  * Please use iwl-commands.h for uCode API definitions.
29  */
30
31 #ifndef __iwl_dev_h__
32 #define __iwl_dev_h__
33
34 #include <linux/interrupt.h>
35 #include <linux/kernel.h>
36 #include <linux/wait.h>
37 #include <linux/leds.h>
38 #include <linux/slab.h>
39 #include <net/ieee80211_radiotap.h>
40
41 #include "iwl-eeprom.h"
42 #include "iwl-csr.h"
43 #include "iwl-prph.h"
44 #include "iwl-debug.h"
45 #include "iwl-agn-hw.h"
46 #include "iwl-led.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49 #include "iwl-agn-tt.h"
50 #include "iwl-bus.h"
51 #include "iwl-trans.h"
52 #include "iwl-shared.h"
53
54 struct iwl_tx_queue;
55
56 /* CT-KILL constants */
57 #define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
58 #define CT_KILL_THRESHOLD          114 /* in Celsius */
59 #define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
60
61 /* Default noise level to report when noise measurement is not available.
62  *   This may be because we're:
63  *   1)  Not associated  no beacon statistics being sent to driver)
64  *   2)  Scanning (noise measurement does not apply to associated channel)
65  * Use default noise value of -127 ... this is below the range of measurable
66  *   Rx dBm for all agn devices, so it can indicate "unmeasurable" to user.
67  *   Also, -127 works better than 0 when averaging frames with/without
68  *   noise info (e.g. averaging might be done in app); measured dBm values are
69  *   always negative ... using a negative value as the default keeps all
70  *   averages within an s8's (used in some apps) range of negative values. */
71 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
72
73 /*
74  * RTS threshold here is total size [2347] minus 4 FCS bytes
75  * Per spec:
76  *   a value of 0 means RTS on all data/management packets
77  *   a value > max MSDU size means no RTS
78  * else RTS for data/management frames where MPDU is larger
79  *   than RTS value.
80  */
81 #define DEFAULT_RTS_THRESHOLD     2347U
82 #define MIN_RTS_THRESHOLD         0U
83 #define MAX_RTS_THRESHOLD         2347U
84 #define MAX_MSDU_SIZE             2304U
85 #define MAX_MPDU_SIZE             2346U
86 #define DEFAULT_BEACON_INTERVAL   200U
87 #define DEFAULT_SHORT_RETRY_LIMIT 7U
88 #define DEFAULT_LONG_RETRY_LIMIT  4U
89
90 #define IWL_NUM_SCAN_RATES         (2)
91
92 /*
93  * One for each channel, holds all channel setup data
94  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
95  *     with one another!
96  */
97 struct iwl_channel_info {
98         struct iwl_eeprom_channel eeprom;       /* EEPROM regulatory limit */
99         struct iwl_eeprom_channel ht40_eeprom;  /* EEPROM regulatory limit for
100                                                  * HT40 channel */
101
102         u8 channel;       /* channel number */
103         u8 flags;         /* flags copied from EEPROM */
104         s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
105         s8 curr_txpow;    /* (dBm) regulatory/spectrum/user (not h/w) limit */
106         s8 min_power;     /* always 0 */
107         s8 scan_power;    /* (dBm) regul. eeprom, direct scans, any rate */
108
109         u8 group_index;   /* 0-4, maps channel to group1/2/3/4/5 */
110         u8 band_index;    /* 0-4, maps channel to band1/2/3/4/5 */
111         enum ieee80211_band band;
112
113         /* HT40 channel info */
114         s8 ht40_max_power_avg;  /* (dBm) regul. eeprom, normal Tx, any rate */
115         u8 ht40_flags;          /* flags copied from EEPROM */
116         u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
117 };
118
119 /*
120  * Minimum number of queues. MAX_NUM is defined in hw specific files.
121  * Set the minimum to accommodate
122  *  - 4 standard TX queues
123  *  - the command queue
124  *  - 4 PAN TX queues
125  *  - the PAN multicast queue, and
126  *  - the AUX (TX during scan dwell) queue.
127  */
128 #define IWL_MIN_NUM_QUEUES      11
129
130 /*
131  * Command queue depends on iPAN support.
132  */
133 #define IWL_DEFAULT_CMD_QUEUE_NUM       4
134 #define IWL_IPAN_CMD_QUEUE_NUM          9
135
136 #define IEEE80211_DATA_LEN              2304
137 #define IEEE80211_4ADDR_LEN             30
138 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
139 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
140
141 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
142 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
143 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
144
145 #define IWL_SUPPORTED_RATES_IE_LEN         8
146
147 #define IWL_INVALID_RATE     0xFF
148 #define IWL_INVALID_VALUE    -1
149
150 union iwl_ht_rate_supp {
151         u16 rates;
152         struct {
153                 u8 siso_rate;
154                 u8 mimo_rate;
155         };
156 };
157
158 #define CFG_HT_RX_AMPDU_FACTOR_8K   (0x0)
159 #define CFG_HT_RX_AMPDU_FACTOR_16K  (0x1)
160 #define CFG_HT_RX_AMPDU_FACTOR_32K  (0x2)
161 #define CFG_HT_RX_AMPDU_FACTOR_64K  (0x3)
162 #define CFG_HT_RX_AMPDU_FACTOR_DEF  CFG_HT_RX_AMPDU_FACTOR_64K
163 #define CFG_HT_RX_AMPDU_FACTOR_MAX  CFG_HT_RX_AMPDU_FACTOR_64K
164 #define CFG_HT_RX_AMPDU_FACTOR_MIN  CFG_HT_RX_AMPDU_FACTOR_8K
165
166 /*
167  * Maximal MPDU density for TX aggregation
168  * 4 - 2us density
169  * 5 - 4us density
170  * 6 - 8us density
171  * 7 - 16us density
172  */
173 #define CFG_HT_MPDU_DENSITY_2USEC   (0x4)
174 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
175 #define CFG_HT_MPDU_DENSITY_8USEC   (0x6)
176 #define CFG_HT_MPDU_DENSITY_16USEC  (0x7)
177 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
178 #define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
179 #define CFG_HT_MPDU_DENSITY_MIN     (0x1)
180
181 struct iwl_ht_config {
182         bool single_chain_sufficient;
183         enum ieee80211_smps_mode smps; /* current smps mode */
184 };
185
186 /* QoS structures */
187 struct iwl_qos_info {
188         int qos_active;
189         struct iwl_qosparam_cmd def_qos_parm;
190 };
191
192 /*
193  * Structure should be accessed with sta_lock held. When station addition
194  * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only
195  * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock
196  * held.
197  */
198 struct iwl_station_entry {
199         struct iwl_addsta_cmd sta;
200         u8 used, ctxid;
201         struct iwl_link_quality_cmd *lq;
202 };
203
204 /*
205  * iwl_station_priv: Driver's private station information
206  *
207  * When mac80211 creates a station it reserves some space (hw->sta_data_size)
208  * in the structure for use by driver. This structure is places in that
209  * space.
210  */
211 struct iwl_station_priv {
212         struct iwl_rxon_context *ctx;
213         struct iwl_lq_sta lq_sta;
214         atomic_t pending_frames;
215         bool client;
216         bool asleep;
217         u8 max_agg_bufsize;
218         u8 sta_id;
219 };
220
221 /**
222  * struct iwl_vif_priv - driver's private per-interface information
223  *
224  * When mac80211 allocates a virtual interface, it can allocate
225  * space for us to put data into.
226  */
227 struct iwl_vif_priv {
228         struct iwl_rxon_context *ctx;
229         u8 ibss_bssid_sta_id;
230 };
231
232 /* v1/v2 uCode file layout */
233 struct iwl_ucode_header {
234         __le32 ver;     /* major/minor/API/serial */
235         union {
236                 struct {
237                         __le32 inst_size;       /* bytes of runtime code */
238                         __le32 data_size;       /* bytes of runtime data */
239                         __le32 init_size;       /* bytes of init code */
240                         __le32 init_data_size;  /* bytes of init data */
241                         __le32 boot_size;       /* bytes of bootstrap code */
242                         u8 data[0];             /* in same order as sizes */
243                 } v1;
244                 struct {
245                         __le32 build;           /* build number */
246                         __le32 inst_size;       /* bytes of runtime code */
247                         __le32 data_size;       /* bytes of runtime data */
248                         __le32 init_size;       /* bytes of init code */
249                         __le32 init_data_size;  /* bytes of init data */
250                         __le32 boot_size;       /* bytes of bootstrap code */
251                         u8 data[0];             /* in same order as sizes */
252                 } v2;
253         } u;
254 };
255
256 /*
257  * new TLV uCode file layout
258  *
259  * The new TLV file format contains TLVs, that each specify
260  * some piece of data. To facilitate "groups", for example
261  * different instruction image with different capabilities,
262  * bundled with the same init image, an alternative mechanism
263  * is provided:
264  * When the alternative field is 0, that means that the item
265  * is always valid. When it is non-zero, then it is only
266  * valid in conjunction with items of the same alternative,
267  * in which case the driver (user) selects one alternative
268  * to use.
269  */
270
271 enum iwl_ucode_tlv_type {
272         IWL_UCODE_TLV_INVALID           = 0, /* unused */
273         IWL_UCODE_TLV_INST              = 1,
274         IWL_UCODE_TLV_DATA              = 2,
275         IWL_UCODE_TLV_INIT              = 3,
276         IWL_UCODE_TLV_INIT_DATA         = 4,
277         IWL_UCODE_TLV_BOOT              = 5,
278         IWL_UCODE_TLV_PROBE_MAX_LEN     = 6, /* a u32 value */
279         IWL_UCODE_TLV_PAN               = 7,
280         IWL_UCODE_TLV_RUNT_EVTLOG_PTR   = 8,
281         IWL_UCODE_TLV_RUNT_EVTLOG_SIZE  = 9,
282         IWL_UCODE_TLV_RUNT_ERRLOG_PTR   = 10,
283         IWL_UCODE_TLV_INIT_EVTLOG_PTR   = 11,
284         IWL_UCODE_TLV_INIT_EVTLOG_SIZE  = 12,
285         IWL_UCODE_TLV_INIT_ERRLOG_PTR   = 13,
286         IWL_UCODE_TLV_ENHANCE_SENS_TBL  = 14,
287         IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
288         IWL_UCODE_TLV_WOWLAN_INST       = 16,
289         IWL_UCODE_TLV_WOWLAN_DATA       = 17,
290         IWL_UCODE_TLV_FLAGS             = 18,
291 };
292
293 /**
294  * enum iwl_ucode_tlv_flag - ucode API flags
295  * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
296  *      was a separate TLV but moved here to save space.
297  * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
298  *      treats good CRC threshold as a boolean
299  * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
300  * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
301  */
302 enum iwl_ucode_tlv_flag {
303         IWL_UCODE_TLV_FLAGS_PAN         = BIT(0),
304         IWL_UCODE_TLV_FLAGS_NEWSCAN     = BIT(1),
305         IWL_UCODE_TLV_FLAGS_MFP         = BIT(2),
306         IWL_UCODE_TLV_FLAGS_P2P         = BIT(3),
307 };
308
309 struct iwl_ucode_tlv {
310         __le16 type;            /* see above */
311         __le16 alternative;     /* see comment */
312         __le32 length;          /* not including type/length fields */
313         u8 data[0];
314 } __packed;
315
316 #define IWL_TLV_UCODE_MAGIC     0x0a4c5749
317
318 struct iwl_tlv_ucode_header {
319         /*
320          * The TLV style ucode header is distinguished from
321          * the v1/v2 style header by first four bytes being
322          * zero, as such is an invalid combination of
323          * major/minor/API/serial versions.
324          */
325         __le32 zero;
326         __le32 magic;
327         u8 human_readable[64];
328         __le32 ver;             /* major/minor/API/serial */
329         __le32 build;
330         __le64 alternatives;    /* bitmask of valid alternatives */
331         /*
332          * The data contained herein has a TLV layout,
333          * see above for the TLV header and types.
334          * Note that each TLV is padded to a length
335          * that is a multiple of 4 for alignment.
336          */
337         u8 data[0];
338 };
339
340 struct iwl_sensitivity_ranges {
341         u16 min_nrg_cck;
342         u16 max_nrg_cck;
343
344         u16 nrg_th_cck;
345         u16 nrg_th_ofdm;
346
347         u16 auto_corr_min_ofdm;
348         u16 auto_corr_min_ofdm_mrc;
349         u16 auto_corr_min_ofdm_x1;
350         u16 auto_corr_min_ofdm_mrc_x1;
351
352         u16 auto_corr_max_ofdm;
353         u16 auto_corr_max_ofdm_mrc;
354         u16 auto_corr_max_ofdm_x1;
355         u16 auto_corr_max_ofdm_mrc_x1;
356
357         u16 auto_corr_max_cck;
358         u16 auto_corr_max_cck_mrc;
359         u16 auto_corr_min_cck;
360         u16 auto_corr_min_cck_mrc;
361
362         u16 barker_corr_th_min;
363         u16 barker_corr_th_min_mrc;
364         u16 nrg_th_cca;
365 };
366
367
368 #define KELVIN_TO_CELSIUS(x) ((x)-273)
369 #define CELSIUS_TO_KELVIN(x) ((x)+273)
370
371
372 /******************************************************************************
373  *
374  * Functions implemented in core module which are forward declared here
375  * for use by iwl-[4-5].c
376  *
377  * NOTE:  The implementation of these functions are not hardware specific
378  * which is why they are in the core module files.
379  *
380  * Naming convention --
381  * iwl_         <-- Is part of iwlwifi
382  * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
383  *
384  ****************************************************************************/
385 extern void iwl_update_chain_flags(struct iwl_priv *priv);
386 extern const u8 iwl_bcast_addr[ETH_ALEN];
387
388 #define IWL_OPERATION_MODE_AUTO     0
389 #define IWL_OPERATION_MODE_HT_ONLY  1
390 #define IWL_OPERATION_MODE_MIXED    2
391 #define IWL_OPERATION_MODE_20MHZ    3
392
393 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
394
395 /* Sensitivity and chain noise calibration */
396 #define INITIALIZATION_VALUE            0xFFFF
397 #define IWL_CAL_NUM_BEACONS             16
398 #define MAXIMUM_ALLOWED_PATHLOSS        15
399
400 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
401
402 #define MAX_FA_OFDM  50
403 #define MIN_FA_OFDM  5
404 #define MAX_FA_CCK   50
405 #define MIN_FA_CCK   5
406
407 #define AUTO_CORR_STEP_OFDM       1
408
409 #define AUTO_CORR_STEP_CCK     3
410 #define AUTO_CORR_MAX_TH_CCK   160
411
412 #define NRG_DIFF               2
413 #define NRG_STEP_CCK           2
414 #define NRG_MARGIN             8
415 #define MAX_NUMBER_CCK_NO_FA 100
416
417 #define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
418
419 #define CHAIN_A             0
420 #define CHAIN_B             1
421 #define CHAIN_C             2
422 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
423 #define ALL_BAND_FILTER                 0xFF00
424 #define IN_BAND_FILTER                  0xFF
425 #define MIN_AVERAGE_NOISE_MAX_VALUE     0xFFFFFFFF
426
427 #define NRG_NUM_PREV_STAT_L     20
428 #define NUM_RX_CHAINS           3
429
430 enum iwlagn_false_alarm_state {
431         IWL_FA_TOO_MANY = 0,
432         IWL_FA_TOO_FEW = 1,
433         IWL_FA_GOOD_RANGE = 2,
434 };
435
436 enum iwlagn_chain_noise_state {
437         IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
438         IWL_CHAIN_NOISE_ACCUMULATE,
439         IWL_CHAIN_NOISE_CALIBRATED,
440         IWL_CHAIN_NOISE_DONE,
441 };
442
443
444 /* Opaque calibration results */
445 struct iwl_calib_result {
446         struct list_head list;
447         size_t cmd_len;
448         struct iwl_calib_hdr hdr;
449         /* data follows */
450 };
451
452 /* Sensitivity calib data */
453 struct iwl_sensitivity_data {
454         u32 auto_corr_ofdm;
455         u32 auto_corr_ofdm_mrc;
456         u32 auto_corr_ofdm_x1;
457         u32 auto_corr_ofdm_mrc_x1;
458         u32 auto_corr_cck;
459         u32 auto_corr_cck_mrc;
460
461         u32 last_bad_plcp_cnt_ofdm;
462         u32 last_fa_cnt_ofdm;
463         u32 last_bad_plcp_cnt_cck;
464         u32 last_fa_cnt_cck;
465
466         u32 nrg_curr_state;
467         u32 nrg_prev_state;
468         u32 nrg_value[10];
469         u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
470         u32 nrg_silence_ref;
471         u32 nrg_energy_idx;
472         u32 nrg_silence_idx;
473         u32 nrg_th_cck;
474         s32 nrg_auto_corr_silence_diff;
475         u32 num_in_cck_no_fa;
476         u32 nrg_th_ofdm;
477
478         u16 barker_corr_th_min;
479         u16 barker_corr_th_min_mrc;
480         u16 nrg_th_cca;
481 };
482
483 /* Chain noise (differential Rx gain) calib data */
484 struct iwl_chain_noise_data {
485         u32 active_chains;
486         u32 chain_noise_a;
487         u32 chain_noise_b;
488         u32 chain_noise_c;
489         u32 chain_signal_a;
490         u32 chain_signal_b;
491         u32 chain_signal_c;
492         u16 beacon_count;
493         u8 disconn_array[NUM_RX_CHAINS];
494         u8 delta_gain_code[NUM_RX_CHAINS];
495         u8 radio_write;
496         u8 state;
497 };
498
499 #define EEPROM_SEM_TIMEOUT 10           /* milliseconds */
500 #define EEPROM_SEM_RETRY_LIMIT 1000     /* number of attempts (not time) */
501
502 enum {
503         MEASUREMENT_READY = (1 << 0),
504         MEASUREMENT_ACTIVE = (1 << 1),
505 };
506
507 enum iwl_nvm_type {
508         NVM_DEVICE_TYPE_EEPROM = 0,
509         NVM_DEVICE_TYPE_OTP,
510 };
511
512 /*
513  * Two types of OTP memory access modes
514  *   IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
515  *                              based on physical memory addressing
516  *   IWL_OTP_ACCESS_RELATIVE - relative address mode,
517  *                             based on logical memory addressing
518  */
519 enum iwl_access_mode {
520         IWL_OTP_ACCESS_ABSOLUTE,
521         IWL_OTP_ACCESS_RELATIVE,
522 };
523
524 /**
525  * enum iwl_pa_type - Power Amplifier type
526  * @IWL_PA_SYSTEM:  based on uCode configuration
527  * @IWL_PA_INTERNAL: use Internal only
528  */
529 enum iwl_pa_type {
530         IWL_PA_SYSTEM = 0,
531         IWL_PA_INTERNAL = 1,
532 };
533
534 /* reply_tx_statistics (for _agn devices) */
535 struct reply_tx_error_statistics {
536         u32 pp_delay;
537         u32 pp_few_bytes;
538         u32 pp_bt_prio;
539         u32 pp_quiet_period;
540         u32 pp_calc_ttak;
541         u32 int_crossed_retry;
542         u32 short_limit;
543         u32 long_limit;
544         u32 fifo_underrun;
545         u32 drain_flow;
546         u32 rfkill_flush;
547         u32 life_expire;
548         u32 dest_ps;
549         u32 host_abort;
550         u32 bt_retry;
551         u32 sta_invalid;
552         u32 frag_drop;
553         u32 tid_disable;
554         u32 fifo_flush;
555         u32 insuff_cf_poll;
556         u32 fail_hw_drop;
557         u32 sta_color_mismatch;
558         u32 unknown;
559 };
560
561 /* reply_agg_tx_statistics (for _agn devices) */
562 struct reply_agg_tx_error_statistics {
563         u32 underrun;
564         u32 bt_prio;
565         u32 few_bytes;
566         u32 abort;
567         u32 last_sent_ttl;
568         u32 last_sent_try;
569         u32 last_sent_bt_kill;
570         u32 scd_query;
571         u32 bad_crc32;
572         u32 response;
573         u32 dump_tx;
574         u32 delay_tx;
575         u32 unknown;
576 };
577
578 /* management statistics */
579 enum iwl_mgmt_stats {
580         MANAGEMENT_ASSOC_REQ = 0,
581         MANAGEMENT_ASSOC_RESP,
582         MANAGEMENT_REASSOC_REQ,
583         MANAGEMENT_REASSOC_RESP,
584         MANAGEMENT_PROBE_REQ,
585         MANAGEMENT_PROBE_RESP,
586         MANAGEMENT_BEACON,
587         MANAGEMENT_ATIM,
588         MANAGEMENT_DISASSOC,
589         MANAGEMENT_AUTH,
590         MANAGEMENT_DEAUTH,
591         MANAGEMENT_ACTION,
592         MANAGEMENT_MAX,
593 };
594 /* control statistics */
595 enum iwl_ctrl_stats {
596         CONTROL_BACK_REQ =  0,
597         CONTROL_BACK,
598         CONTROL_PSPOLL,
599         CONTROL_RTS,
600         CONTROL_CTS,
601         CONTROL_ACK,
602         CONTROL_CFEND,
603         CONTROL_CFENDACK,
604         CONTROL_MAX,
605 };
606
607 struct traffic_stats {
608 #ifdef CONFIG_IWLWIFI_DEBUGFS
609         u32 mgmt[MANAGEMENT_MAX];
610         u32 ctrl[CONTROL_MAX];
611         u32 data_cnt;
612         u64 data_bytes;
613 #endif
614 };
615
616 /*
617  * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
618  * to perform continuous uCode event logging operation if enabled
619  */
620 #define UCODE_TRACE_PERIOD (100)
621
622 /*
623  * iwl_event_log: current uCode event log position
624  *
625  * @ucode_trace: enable/disable ucode continuous trace timer
626  * @num_wraps: how many times the event buffer wraps
627  * @next_entry:  the entry just before the next one that uCode would fill
628  * @non_wraps_count: counter for no wrap detected when dump ucode events
629  * @wraps_once_count: counter for wrap once detected when dump ucode events
630  * @wraps_more_count: counter for wrap more than once detected
631  *                    when dump ucode events
632  */
633 struct iwl_event_log {
634         bool ucode_trace;
635         u32 num_wraps;
636         u32 next_entry;
637         int non_wraps_count;
638         int wraps_once_count;
639         int wraps_more_count;
640 };
641
642 /*
643  * This is the threshold value of plcp error rate per 100mSecs.  It is
644  * used to set and check for the validity of plcp_delta.
645  */
646 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN  (1)
647 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF  (50)
648 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF     (100)
649 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF (200)
650 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX  (255)
651 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE      (0)
652
653 #define IWL_DELAY_NEXT_FORCE_RF_RESET  (HZ*3)
654 #define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
655
656 /* TX queue watchdog timeouts in mSecs */
657 #define IWL_DEF_WD_TIMEOUT      (2000)
658 #define IWL_LONG_WD_TIMEOUT     (10000)
659 #define IWL_MAX_WD_TIMEOUT      (120000)
660
661 /* BT Antenna Coupling Threshold (dB) */
662 #define IWL_BT_ANTENNA_COUPLING_THRESHOLD       (35)
663
664 /* Firmware reload counter and Timestamp */
665 #define IWL_MIN_RELOAD_DURATION         1000 /* 1000 ms */
666 #define IWL_MAX_CONTINUE_RELOAD_CNT     4
667
668
669 enum iwl_reset {
670         IWL_RF_RESET = 0,
671         IWL_FW_RESET,
672         IWL_MAX_FORCE_RESET,
673 };
674
675 struct iwl_force_reset {
676         int reset_request_count;
677         int reset_success_count;
678         int reset_reject_count;
679         unsigned long reset_duration;
680         unsigned long last_force_reset_jiffies;
681 };
682
683 /* extend beacon time format bit shifting  */
684 /*
685  * for _agn devices
686  * bits 31:22 - extended
687  * bits 21:0  - interval
688  */
689 #define IWLAGN_EXT_BEACON_TIME_POS      22
690
691 struct iwl_rxon_context {
692         struct ieee80211_vif *vif;
693
694         /*
695          * We could use the vif to indicate active, but we
696          * also need it to be active during disabling when
697          * we already removed the vif for type setting.
698          */
699         bool always_active, is_active;
700
701         bool ht_need_multiple_chains;
702
703         enum iwl_rxon_context_id ctxid;
704
705         u32 interface_modes, exclusive_interface_modes;
706         u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
707
708         /*
709          * We declare this const so it can only be
710          * changed via explicit cast within the
711          * routines that actually update the physical
712          * hardware.
713          */
714         const struct iwl_rxon_cmd active;
715         struct iwl_rxon_cmd staging;
716
717         struct iwl_rxon_time_cmd timing;
718
719         struct iwl_qos_info qos_data;
720
721         u8 bcast_sta_id, ap_sta_id;
722
723         u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
724         u8 qos_cmd;
725         u8 wep_key_cmd;
726
727         struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
728         u8 key_mapping_keys;
729
730         __le32 station_flags;
731
732         int beacon_int;
733
734         struct {
735                 bool non_gf_sta_present;
736                 u8 protection;
737                 bool enabled, is_40mhz;
738                 u8 extension_chan_offset;
739         } ht;
740
741         u8 bssid[ETH_ALEN];
742         bool preauth_bssid;
743
744         bool last_tx_rejected;
745 };
746
747 enum iwl_scan_type {
748         IWL_SCAN_NORMAL,
749         IWL_SCAN_RADIO_RESET,
750         IWL_SCAN_ROC,
751 };
752
753 #ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
754 struct iwl_testmode_trace {
755         u32 buff_size;
756         u32 total_size;
757         u32 num_chunks;
758         u8 *cpu_addr;
759         u8 *trace_addr;
760         dma_addr_t dma_addr;
761         bool trace_enabled;
762 };
763 struct iwl_testmode_sram {
764         u32 buff_size;
765         u32 num_chunks;
766         u8 *buff_addr;
767         bool sram_readed;
768 };
769 #endif
770
771 struct iwl_wipan_noa_data {
772         struct rcu_head rcu_head;
773         u32 length;
774         u8 data[];
775 };
776
777 struct iwl_priv {
778
779         /*data shared among all the driver's layers */
780         struct iwl_shared _shrd;
781         struct iwl_shared *shrd;
782
783         /* ieee device used by generic ieee processing code */
784         struct ieee80211_hw *hw;
785         struct ieee80211_channel *ieee_channels;
786         struct ieee80211_rate *ieee_rates;
787         struct kmem_cache *tx_cmd_pool;
788         struct iwl_cfg *cfg;
789
790         enum ieee80211_band band;
791
792         void (*pre_rx_handler)(struct iwl_priv *priv,
793                                struct iwl_rx_mem_buffer *rxb);
794         int (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
795                                        struct iwl_rx_mem_buffer *rxb,
796                                        struct iwl_device_cmd *cmd);
797
798         struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
799
800         /* spectrum measurement report caching */
801         struct iwl_spectrum_notification measure_report;
802         u8 measurement_status;
803
804         /* ucode beacon time */
805         u32 ucode_beacon_time;
806         int missed_beacon_threshold;
807
808         /* track IBSS manager (last beacon) status */
809         u32 ibss_manager;
810
811         /* jiffies when last recovery from statistics was performed */
812         unsigned long rx_statistics_jiffies;
813
814         /*counters */
815         u32 rx_handlers_stats[REPLY_MAX];
816
817         /* force reset */
818         struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
819
820         /* firmware reload counter and timestamp */
821         unsigned long reload_jiffies;
822         int reload_count;
823
824         /* we allocate array of iwl_channel_info for NIC's valid channels.
825          *    Access via channel # using indirect index array */
826         struct iwl_channel_info *channel_info;  /* channel info array */
827         u8 channel_count;       /* # of channels */
828
829         /* thermal calibration */
830         s32 temperature;        /* Celsius */
831         s32 last_temperature;
832
833         /* init calibration results */
834         struct list_head calib_results;
835
836         struct iwl_wipan_noa_data __rcu *noa_data;
837
838         /* Scan related variables */
839         unsigned long scan_start;
840         unsigned long scan_start_tsf;
841         void *scan_cmd;
842         enum ieee80211_band scan_band;
843         struct cfg80211_scan_request *scan_request;
844         struct ieee80211_vif *scan_vif;
845         enum iwl_scan_type scan_type;
846         u8 scan_tx_ant[IEEE80211_NUM_BANDS];
847         u8 mgmt_tx_ant;
848
849         /* max number of station keys */
850         u8 sta_key_max_num;
851
852         bool new_scan_threshold_behaviour;
853
854         /* EEPROM MAC addresses */
855         struct mac_address addresses[2];
856
857         /* uCode images, save to reload in case of failure */
858         int fw_index;                   /* firmware we're trying to load */
859         u32 ucode_ver;                  /* version of ucode, copy of
860                                            iwl_ucode.ver */
861
862         char firmware_name[25];
863
864         struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
865
866         __le16 switch_channel;
867
868         u16 active_rate;
869
870         u8 start_calib;
871         struct iwl_sensitivity_data sensitivity_data;
872         struct iwl_chain_noise_data chain_noise_data;
873         bool enhance_sensitivity_table;
874         __le16 sensitivity_tbl[HD_TABLE_SIZE];
875         __le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES];
876
877         struct iwl_ht_config current_ht_config;
878
879         /* Rate scaling data */
880         u8 retry_rate;
881
882         int activity_timer_active;
883
884         /* counts mgmt, ctl, and data packets */
885         struct traffic_stats tx_stats;
886         struct traffic_stats rx_stats;
887
888         struct iwl_power_mgr power_data;
889         struct iwl_tt_mgmt thermal_throttle;
890
891         /* station table variables */
892         int num_stations;
893         struct iwl_station_entry stations[IWLAGN_STATION_COUNT];
894         unsigned long ucode_key_table;
895
896         u8 mac80211_registered;
897
898         /* Indication if ieee80211_ops->open has been called */
899         u8 is_open;
900
901         enum nl80211_iftype iw_mode;
902
903         /* Last Rx'd beacon timestamp */
904         u64 timestamp;
905
906         struct {
907                 __le32 flag;
908                 struct statistics_general_common common;
909                 struct statistics_rx_non_phy rx_non_phy;
910                 struct statistics_rx_phy rx_ofdm;
911                 struct statistics_rx_ht_phy rx_ofdm_ht;
912                 struct statistics_rx_phy rx_cck;
913                 struct statistics_tx tx;
914 #ifdef CONFIG_IWLWIFI_DEBUGFS
915                 struct statistics_bt_activity bt_activity;
916                 __le32 num_bt_kills, accum_num_bt_kills;
917 #endif
918         } statistics;
919 #ifdef CONFIG_IWLWIFI_DEBUGFS
920         struct {
921                 struct statistics_general_common common;
922                 struct statistics_rx_non_phy rx_non_phy;
923                 struct statistics_rx_phy rx_ofdm;
924                 struct statistics_rx_ht_phy rx_ofdm_ht;
925                 struct statistics_rx_phy rx_cck;
926                 struct statistics_tx tx;
927                 struct statistics_bt_activity bt_activity;
928         } accum_stats, delta_stats, max_delta_stats;
929 #endif
930
931         /*
932          * reporting the number of tids has AGG on. 0 means
933          * no AGGREGATION
934          */
935         u8 agg_tids_count;
936
937         struct iwl_rx_phy_res last_phy_res;
938         bool last_phy_res_valid;
939
940         struct completion firmware_loading_complete;
941
942         u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
943         u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
944
945         /*
946          * chain noise reset and gain commands are the
947          * two extra calibration commands follows the standard
948          * phy calibration commands
949          */
950         u8 phy_calib_chain_noise_reset_cmd;
951         u8 phy_calib_chain_noise_gain_cmd;
952
953         /* counts reply_tx error */
954         struct reply_tx_error_statistics reply_tx_stats;
955         struct reply_agg_tx_error_statistics reply_agg_tx_stats;
956
957         /* remain-on-channel offload support */
958         struct ieee80211_channel *hw_roc_channel;
959         struct delayed_work hw_roc_disable_work;
960         enum nl80211_channel_type hw_roc_chantype;
961         int hw_roc_duration;
962         bool hw_roc_setup, hw_roc_start_notified;
963
964         /* bt coex */
965         u8 bt_enable_flag;
966         u8 bt_status;
967         u8 bt_traffic_load, last_bt_traffic_load;
968         bool bt_ch_announce;
969         bool bt_full_concurrent;
970         bool bt_ant_couple_ok;
971         __le32 kill_ack_mask;
972         __le32 kill_cts_mask;
973         __le16 bt_valid;
974         u16 bt_on_thresh;
975         u16 bt_duration;
976         u16 dynamic_frag_thresh;
977         u8 bt_ci_compliance;
978         struct work_struct bt_traffic_change_work;
979         bool bt_enable_pspoll;
980         struct iwl_rxon_context *cur_rssi_ctx;
981         bool bt_is_sco;
982
983         struct work_struct restart;
984         struct work_struct scan_completed;
985         struct work_struct abort_scan;
986
987         struct work_struct beacon_update;
988         struct iwl_rxon_context *beacon_ctx;
989         struct sk_buff *beacon_skb;
990         void *beacon_cmd;
991
992         struct work_struct tt_work;
993         struct work_struct ct_enter;
994         struct work_struct ct_exit;
995         struct work_struct start_internal_scan;
996         struct work_struct tx_flush;
997         struct work_struct bt_full_concurrency;
998         struct work_struct bt_runtime_config;
999
1000         struct delayed_work scan_check;
1001
1002         /* TX Power */
1003         s8 tx_power_user_lmt;
1004         s8 tx_power_device_lmt;
1005         s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
1006         s8 tx_power_next;
1007
1008 #ifdef CONFIG_IWLWIFI_DEBUGFS
1009         /* debugfs */
1010         u16 tx_traffic_idx;
1011         u16 rx_traffic_idx;
1012         u8 *tx_traffic;
1013         u8 *rx_traffic;
1014         struct dentry *debugfs_dir;
1015         u32 dbgfs_sram_offset, dbgfs_sram_len;
1016         bool disable_ht40;
1017         void *wowlan_sram;
1018 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1019
1020         struct work_struct txpower_work;
1021         u32 disable_sens_cal;
1022         u32 disable_chain_noise_cal;
1023         struct work_struct run_time_calib_work;
1024         struct timer_list statistics_periodic;
1025         struct timer_list ucode_trace;
1026         struct timer_list watchdog;
1027
1028         struct iwl_event_log event_log;
1029
1030         struct led_classdev led;
1031         unsigned long blink_on, blink_off;
1032         bool led_registered;
1033 #ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
1034         struct iwl_testmode_trace testmode_trace;
1035         struct iwl_testmode_sram testmode_sram;
1036         u32 tm_fixed_rate;
1037 #endif
1038
1039         /* WoWLAN GTK rekey data */
1040         u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN];
1041         __le64 replay_ctr;
1042         __le16 last_seq_ctl;
1043         bool have_rekey_data;
1044 }; /*iwl_priv */
1045
1046 extern struct iwl_mod_params iwlagn_mod_params;
1047
1048 static inline struct iwl_rxon_context *
1049 iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif)
1050 {
1051         struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
1052
1053         return vif_priv->ctx;
1054 }
1055
1056 #define for_each_context(priv, ctx)                             \
1057         for (ctx = &priv->contexts[IWL_RXON_CTX_BSS];           \
1058              ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++)    \
1059                 if (priv->shrd->valid_contexts & BIT(ctx->ctxid))
1060
1061 static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
1062 {
1063         return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1064 }
1065
1066 static inline int iwl_is_associated(struct iwl_priv *priv,
1067                                     enum iwl_rxon_context_id ctxid)
1068 {
1069         return iwl_is_associated_ctx(&priv->contexts[ctxid]);
1070 }
1071
1072 static inline int iwl_is_any_associated(struct iwl_priv *priv)
1073 {
1074         struct iwl_rxon_context *ctx;
1075         for_each_context(priv, ctx)
1076                 if (iwl_is_associated_ctx(ctx))
1077                         return true;
1078         return false;
1079 }
1080
1081 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1082 {
1083         if (ch_info == NULL)
1084                 return 0;
1085         return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1086 }
1087
1088 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1089 {
1090         return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1091 }
1092
1093 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1094 {
1095         return ch_info->band == IEEE80211_BAND_5GHZ;
1096 }
1097
1098 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1099 {
1100         return ch_info->band == IEEE80211_BAND_2GHZ;
1101 }
1102
1103 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1104 {
1105         return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1106 }
1107
1108 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1109 {
1110         return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1111 }
1112
1113 #endif                          /* __iwl_dev_h__ */