2 * Copyright (c) 2008 Atheros Communications Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include <linux/nl80211.h>
22 #define ATH_PCI_VERSION "0.1"
24 static char *dev_info = "ath9k";
26 MODULE_AUTHOR("Atheros Communications");
27 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
28 MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
29 MODULE_LICENSE("Dual BSD/GPL");
31 static struct pci_device_id ath_pci_id_table[] __devinitdata = {
32 { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
33 { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
34 { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
35 { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
36 { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
37 { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
41 static void ath_detach(struct ath_softc *sc);
43 /* return bus cachesize in 4B word units */
45 static void bus_read_cachesize(struct ath_softc *sc, int *csz)
49 pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp);
53 * This check was put in to avoid "unplesant" consequences if
54 * the bootrom has not fully initialized all PCI devices.
55 * Sometimes the cache line size register is not set
59 *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
62 static void ath_cache_conf_rate(struct ath_softc *sc,
63 struct ieee80211_conf *conf)
65 switch (conf->channel->band) {
66 case IEEE80211_BAND_2GHZ:
67 if (conf_is_ht20(conf))
69 sc->hw_rate_table[ATH9K_MODE_11NG_HT20];
70 else if (conf_is_ht40_minus(conf))
72 sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS];
73 else if (conf_is_ht40_plus(conf))
75 sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS];
78 sc->hw_rate_table[ATH9K_MODE_11G];
80 case IEEE80211_BAND_5GHZ:
81 if (conf_is_ht20(conf))
83 sc->hw_rate_table[ATH9K_MODE_11NA_HT20];
84 else if (conf_is_ht40_minus(conf))
86 sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS];
87 else if (conf_is_ht40_plus(conf))
89 sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS];
92 sc->hw_rate_table[ATH9K_MODE_11A];
100 static void ath_update_txpow(struct ath_softc *sc)
102 struct ath_hal *ah = sc->sc_ah;
105 if (sc->sc_curtxpow != sc->sc_config.txpowlimit) {
106 ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit);
107 /* read back in case value is clamped */
108 ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
109 sc->sc_curtxpow = txpow;
113 static u8 parse_mpdudensity(u8 mpdudensity)
116 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
117 * 0 for no restriction
126 switch (mpdudensity) {
132 /* Our lower layer calculations limit our precision to
148 static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
150 struct ath_rate_table *rate_table = NULL;
151 struct ieee80211_supported_band *sband;
152 struct ieee80211_rate *rate;
156 case IEEE80211_BAND_2GHZ:
157 rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
159 case IEEE80211_BAND_5GHZ:
160 rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
166 if (rate_table == NULL)
169 sband = &sc->sbands[band];
170 rate = sc->rates[band];
172 if (rate_table->rate_cnt > ATH_RATE_MAX)
173 maxrates = ATH_RATE_MAX;
175 maxrates = rate_table->rate_cnt;
177 for (i = 0; i < maxrates; i++) {
178 rate[i].bitrate = rate_table->info[i].ratekbps / 100;
179 rate[i].hw_value = rate_table->info[i].ratecode;
181 DPRINTF(sc, ATH_DBG_CONFIG, "Rate: %2dMbps, ratecode: %2d\n",
182 rate[i].bitrate / 10, rate[i].hw_value);
186 static int ath_setup_channels(struct ath_softc *sc)
188 struct ath_hal *ah = sc->sc_ah;
189 int nchan, i, a = 0, b = 0;
190 u8 regclassids[ATH_REGCLASSIDS_MAX];
192 struct ieee80211_supported_band *band_2ghz;
193 struct ieee80211_supported_band *band_5ghz;
194 struct ieee80211_channel *chan_2ghz;
195 struct ieee80211_channel *chan_5ghz;
196 struct ath9k_channel *c;
198 /* Fill in ah->ah_channels */
199 if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (u32 *)&nchan,
200 regclassids, ATH_REGCLASSIDS_MAX,
201 &nregclass, CTRY_DEFAULT, false, 1)) {
202 u32 rd = ah->ah_currentRD;
203 DPRINTF(sc, ATH_DBG_FATAL,
204 "Unable to collect channel list; "
205 "regdomain likely %u country code %u\n",
210 band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ];
211 band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ];
212 chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ];
213 chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ];
215 for (i = 0; i < nchan; i++) {
216 c = &ah->ah_channels[i];
217 if (IS_CHAN_2GHZ(c)) {
218 chan_2ghz[a].band = IEEE80211_BAND_2GHZ;
219 chan_2ghz[a].center_freq = c->channel;
220 chan_2ghz[a].max_power = c->maxTxPower;
221 c->chan = &chan_2ghz[a];
223 if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
224 chan_2ghz[a].flags |= IEEE80211_CHAN_NO_IBSS;
225 if (c->channelFlags & CHANNEL_PASSIVE)
226 chan_2ghz[a].flags |= IEEE80211_CHAN_PASSIVE_SCAN;
228 band_2ghz->n_channels = ++a;
230 DPRINTF(sc, ATH_DBG_CONFIG, "2MHz channel: %d, "
231 "channelFlags: 0x%x\n",
232 c->channel, c->channelFlags);
233 } else if (IS_CHAN_5GHZ(c)) {
234 chan_5ghz[b].band = IEEE80211_BAND_5GHZ;
235 chan_5ghz[b].center_freq = c->channel;
236 chan_5ghz[b].max_power = c->maxTxPower;
237 c->chan = &chan_5ghz[a];
239 if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
240 chan_5ghz[b].flags |= IEEE80211_CHAN_NO_IBSS;
241 if (c->channelFlags & CHANNEL_PASSIVE)
242 chan_5ghz[b].flags |= IEEE80211_CHAN_PASSIVE_SCAN;
244 band_5ghz->n_channels = ++b;
246 DPRINTF(sc, ATH_DBG_CONFIG, "5MHz channel: %d, "
247 "channelFlags: 0x%x\n",
248 c->channel, c->channelFlags);
256 * Set/change channels. If the channel is really being changed, it's done
257 * by reseting the chip. To accomplish this we must first cleanup any pending
258 * DMA, then restart stuff.
260 static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan)
262 struct ath_hal *ah = sc->sc_ah;
263 bool fastcc = true, stopped;
264 struct ieee80211_hw *hw = sc->hw;
265 struct ieee80211_channel *channel = hw->conf.channel;
268 if (sc->sc_flags & SC_OP_INVALID)
271 if (hchan->channel != sc->sc_ah->ah_curchan->channel ||
272 hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags ||
273 (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) ||
274 (sc->sc_flags & SC_OP_FULL_RESET)) {
276 * This is only performed if the channel settings have
279 * To switch channels clear any pending DMA operations;
280 * wait long enough for the RX fifo to drain, reset the
281 * hardware at the new frequency, and then re-enable
282 * the relevant bits of the h/w.
284 ath9k_hw_set_interrupts(ah, 0);
285 ath_draintxq(sc, false);
286 stopped = ath_stoprecv(sc);
288 /* XXX: do not flush receive queue here. We don't want
289 * to flush data frames already in queue because of
290 * changing channel. */
292 if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
295 DPRINTF(sc, ATH_DBG_CONFIG,
296 "(%u MHz) -> (%u MHz), chanwidth: %d\n",
297 sc->sc_ah->ah_curchan->channel,
298 channel->center_freq, sc->tx_chan_width);
300 spin_lock_bh(&sc->sc_resetlock);
302 r = ath9k_hw_reset(ah, hchan, fastcc);
304 DPRINTF(sc, ATH_DBG_FATAL,
305 "Unable to reset channel (%u Mhz) "
307 channel->center_freq, r);
308 spin_unlock_bh(&sc->sc_resetlock);
311 spin_unlock_bh(&sc->sc_resetlock);
313 sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE;
314 sc->sc_flags &= ~SC_OP_FULL_RESET;
316 if (ath_startrecv(sc) != 0) {
317 DPRINTF(sc, ATH_DBG_FATAL,
318 "Unable to restart recv logic\n");
322 ath_cache_conf_rate(sc, &hw->conf);
323 ath_update_txpow(sc);
324 ath9k_hw_set_interrupts(ah, sc->sc_imask);
330 * This routine performs the periodic noise floor calibration function
331 * that is used to adjust and optimize the chip performance. This
332 * takes environmental changes (location, temperature) into account.
333 * When the task is complete, it reschedules itself depending on the
334 * appropriate interval that was calculated.
336 static void ath_ani_calibrate(unsigned long data)
338 struct ath_softc *sc;
340 bool longcal = false;
341 bool shortcal = false;
342 bool aniflag = false;
343 unsigned int timestamp = jiffies_to_msecs(jiffies);
346 sc = (struct ath_softc *)data;
350 * don't calibrate when we're scanning.
351 * we are most likely not on our home channel.
353 if (sc->rx.rxfilter & FIF_BCN_PRBRESP_PROMISC)
356 /* Long calibration runs independently of short calibration. */
357 if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) {
359 DPRINTF(sc, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
360 sc->sc_ani.sc_longcal_timer = timestamp;
363 /* Short calibration applies only while sc_caldone is false */
364 if (!sc->sc_ani.sc_caldone) {
365 if ((timestamp - sc->sc_ani.sc_shortcal_timer) >=
366 ATH_SHORT_CALINTERVAL) {
368 DPRINTF(sc, ATH_DBG_ANI, "shortcal @%lu\n", jiffies);
369 sc->sc_ani.sc_shortcal_timer = timestamp;
370 sc->sc_ani.sc_resetcal_timer = timestamp;
373 if ((timestamp - sc->sc_ani.sc_resetcal_timer) >=
374 ATH_RESTART_CALINTERVAL) {
375 sc->sc_ani.sc_caldone = ath9k_hw_reset_calvalid(ah);
376 if (sc->sc_ani.sc_caldone)
377 sc->sc_ani.sc_resetcal_timer = timestamp;
381 /* Verify whether we must check ANI */
382 if ((timestamp - sc->sc_ani.sc_checkani_timer) >=
383 ATH_ANI_POLLINTERVAL) {
385 sc->sc_ani.sc_checkani_timer = timestamp;
388 /* Skip all processing if there's nothing to do. */
389 if (longcal || shortcal || aniflag) {
390 /* Call ANI routine if necessary */
392 ath9k_hw_ani_monitor(ah, &sc->sc_halstats,
395 /* Perform calibration if necessary */
396 if (longcal || shortcal) {
397 bool iscaldone = false;
399 if (ath9k_hw_calibrate(ah, ah->ah_curchan,
400 sc->sc_rx_chainmask, longcal,
403 sc->sc_ani.sc_noise_floor =
404 ath9k_hw_getchan_noise(ah,
407 DPRINTF(sc, ATH_DBG_ANI,
408 "calibrate chan %u/%x nf: %d\n",
409 ah->ah_curchan->channel,
410 ah->ah_curchan->channelFlags,
411 sc->sc_ani.sc_noise_floor);
413 DPRINTF(sc, ATH_DBG_ANY,
414 "calibrate chan %u/%x failed\n",
415 ah->ah_curchan->channel,
416 ah->ah_curchan->channelFlags);
418 sc->sc_ani.sc_caldone = iscaldone;
423 * Set timer interval based on previous results.
424 * The interval must be the shortest necessary to satisfy ANI,
425 * short calibration and long calibration.
427 cal_interval = ATH_LONG_CALINTERVAL;
428 if (sc->sc_ah->ah_config.enable_ani)
429 cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL);
430 if (!sc->sc_ani.sc_caldone)
431 cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL);
433 mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval));
437 * Update tx/rx chainmask. For legacy association,
438 * hard code chainmask to 1x1, for 11n association, use
439 * the chainmask configuration.
441 static void ath_update_chainmask(struct ath_softc *sc, int is_ht)
443 sc->sc_flags |= SC_OP_CHAINMASK_UPDATE;
445 sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask;
446 sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask;
448 sc->sc_tx_chainmask = 1;
449 sc->sc_rx_chainmask = 1;
452 DPRINTF(sc, ATH_DBG_CONFIG, "tx chmask: %d, rx chmask: %d\n",
453 sc->sc_tx_chainmask, sc->sc_rx_chainmask);
456 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
460 an = (struct ath_node *)sta->drv_priv;
462 if (sc->sc_flags & SC_OP_TXAGGR)
463 ath_tx_node_init(sc, an);
465 an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
466 sta->ht_cap.ampdu_factor);
467 an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
470 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
472 struct ath_node *an = (struct ath_node *)sta->drv_priv;
474 if (sc->sc_flags & SC_OP_TXAGGR)
475 ath_tx_node_cleanup(sc, an);
478 static void ath9k_tasklet(unsigned long data)
480 struct ath_softc *sc = (struct ath_softc *)data;
481 u32 status = sc->sc_intrstatus;
483 if (status & ATH9K_INT_FATAL) {
484 /* need a chip reset */
485 ath_reset(sc, false);
490 (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
491 spin_lock_bh(&sc->rx.rxflushlock);
492 ath_rx_tasklet(sc, 0);
493 spin_unlock_bh(&sc->rx.rxflushlock);
495 /* XXX: optimize this */
496 if (status & ATH9K_INT_TX)
500 /* re-enable hardware interrupt */
501 ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
504 static irqreturn_t ath_isr(int irq, void *dev)
506 struct ath_softc *sc = dev;
507 struct ath_hal *ah = sc->sc_ah;
508 enum ath9k_int status;
512 if (sc->sc_flags & SC_OP_INVALID) {
514 * The hardware is not ready/present, don't
515 * touch anything. Note this can happen early
516 * on if the IRQ is shared.
520 if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */
525 * Figure out the reason(s) for the interrupt. Note
526 * that the hal returns a pseudo-ISR that may include
527 * bits we haven't explicitly enabled so we mask the
528 * value to insure we only process bits we requested.
530 ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
532 status &= sc->sc_imask; /* discard unasked-for bits */
535 * If there are no status bits set, then this interrupt was not
536 * for me (should have been caught above).
541 sc->sc_intrstatus = status;
543 if (status & ATH9K_INT_FATAL) {
544 /* need a chip reset */
546 } else if (status & ATH9K_INT_RXORN) {
547 /* need a chip reset */
550 if (status & ATH9K_INT_SWBA) {
551 /* schedule a tasklet for beacon handling */
552 tasklet_schedule(&sc->bcon_tasklet);
554 if (status & ATH9K_INT_RXEOL) {
556 * NB: the hardware should re-read the link when
557 * RXE bit is written, but it doesn't work
558 * at least on older hardware revs.
563 if (status & ATH9K_INT_TXURN)
564 /* bump tx trigger level */
565 ath9k_hw_updatetxtriglevel(ah, true);
566 /* XXX: optimize this */
567 if (status & ATH9K_INT_RX)
569 if (status & ATH9K_INT_TX)
571 if (status & ATH9K_INT_BMISS)
573 /* carrier sense timeout */
574 if (status & ATH9K_INT_CST)
576 if (status & ATH9K_INT_MIB) {
578 * Disable interrupts until we service the MIB
579 * interrupt; otherwise it will continue to
582 ath9k_hw_set_interrupts(ah, 0);
584 * Let the hal handle the event. We assume
585 * it will clear whatever condition caused
588 ath9k_hw_procmibevent(ah, &sc->sc_halstats);
589 ath9k_hw_set_interrupts(ah, sc->sc_imask);
591 if (status & ATH9K_INT_TIM_TIMER) {
592 if (!(ah->ah_caps.hw_caps &
593 ATH9K_HW_CAP_AUTOSLEEP)) {
594 /* Clear RxAbort bit so that we can
596 ath9k_hw_setrxabort(ah, 0);
603 ath_debug_stat_interrupt(sc, status);
606 /* turn off every interrupt except SWBA */
607 ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA));
608 tasklet_schedule(&sc->intr_tq);
614 static int ath_get_channel(struct ath_softc *sc,
615 struct ieee80211_channel *chan)
619 for (i = 0; i < sc->sc_ah->ah_nchan; i++) {
620 if (sc->sc_ah->ah_channels[i].channel == chan->center_freq)
627 static u32 ath_get_extchanmode(struct ath_softc *sc,
628 struct ieee80211_channel *chan,
629 enum nl80211_channel_type channel_type)
633 switch (chan->band) {
634 case IEEE80211_BAND_2GHZ:
635 switch(channel_type) {
636 case NL80211_CHAN_NO_HT:
637 case NL80211_CHAN_HT20:
638 chanmode = CHANNEL_G_HT20;
640 case NL80211_CHAN_HT40PLUS:
641 chanmode = CHANNEL_G_HT40PLUS;
643 case NL80211_CHAN_HT40MINUS:
644 chanmode = CHANNEL_G_HT40MINUS;
648 case IEEE80211_BAND_5GHZ:
649 switch(channel_type) {
650 case NL80211_CHAN_NO_HT:
651 case NL80211_CHAN_HT20:
652 chanmode = CHANNEL_A_HT20;
654 case NL80211_CHAN_HT40PLUS:
655 chanmode = CHANNEL_A_HT40PLUS;
657 case NL80211_CHAN_HT40MINUS:
658 chanmode = CHANNEL_A_HT40MINUS;
669 static int ath_keyset(struct ath_softc *sc, u16 keyix,
670 struct ath9k_keyval *hk, const u8 mac[ETH_ALEN])
674 status = ath9k_hw_set_keycache_entry(sc->sc_ah,
675 keyix, hk, mac, false);
677 return status != false;
680 static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
681 struct ath9k_keyval *hk,
687 key_txmic = key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
688 key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
691 /* Group key installation */
692 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
693 return ath_keyset(sc, keyix, hk, addr);
695 if (!sc->sc_splitmic) {
697 * data key goes at first index,
698 * the hal handles the MIC keys at index+64.
700 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
701 memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
702 return ath_keyset(sc, keyix, hk, addr);
705 * TX key goes at first index, RX key at +32.
706 * The hal handles the MIC keys at index+64.
708 memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
709 if (!ath_keyset(sc, keyix, hk, NULL)) {
710 /* Txmic entry failed. No need to proceed further */
711 DPRINTF(sc, ATH_DBG_KEYCACHE,
712 "Setting TX MIC Key Failed\n");
716 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
717 /* XXX delete tx key on failure? */
718 return ath_keyset(sc, keyix + 32, hk, addr);
721 static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc)
725 for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 2; i++) {
726 if (test_bit(i, sc->sc_keymap) ||
727 test_bit(i + 64, sc->sc_keymap))
728 continue; /* At least one part of TKIP key allocated */
729 if (sc->sc_splitmic &&
730 (test_bit(i + 32, sc->sc_keymap) ||
731 test_bit(i + 64 + 32, sc->sc_keymap)))
732 continue; /* At least one part of TKIP key allocated */
734 /* Found a free slot for a TKIP key */
740 static int ath_reserve_key_cache_slot(struct ath_softc *sc)
744 /* First, try to find slots that would not be available for TKIP. */
745 if (sc->sc_splitmic) {
746 for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 4; i++) {
747 if (!test_bit(i, sc->sc_keymap) &&
748 (test_bit(i + 32, sc->sc_keymap) ||
749 test_bit(i + 64, sc->sc_keymap) ||
750 test_bit(i + 64 + 32, sc->sc_keymap)))
752 if (!test_bit(i + 32, sc->sc_keymap) &&
753 (test_bit(i, sc->sc_keymap) ||
754 test_bit(i + 64, sc->sc_keymap) ||
755 test_bit(i + 64 + 32, sc->sc_keymap)))
757 if (!test_bit(i + 64, sc->sc_keymap) &&
758 (test_bit(i , sc->sc_keymap) ||
759 test_bit(i + 32, sc->sc_keymap) ||
760 test_bit(i + 64 + 32, sc->sc_keymap)))
762 if (!test_bit(i + 64 + 32, sc->sc_keymap) &&
763 (test_bit(i, sc->sc_keymap) ||
764 test_bit(i + 32, sc->sc_keymap) ||
765 test_bit(i + 64, sc->sc_keymap)))
769 for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 2; i++) {
770 if (!test_bit(i, sc->sc_keymap) &&
771 test_bit(i + 64, sc->sc_keymap))
773 if (test_bit(i, sc->sc_keymap) &&
774 !test_bit(i + 64, sc->sc_keymap))
779 /* No partially used TKIP slots, pick any available slot */
780 for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax; i++) {
781 /* Do not allow slots that could be needed for TKIP group keys
782 * to be used. This limitation could be removed if we know that
783 * TKIP will not be used. */
784 if (i >= 64 && i < 64 + IEEE80211_WEP_NKID)
786 if (sc->sc_splitmic) {
787 if (i >= 32 && i < 32 + IEEE80211_WEP_NKID)
789 if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID)
793 if (!test_bit(i, sc->sc_keymap))
794 return i; /* Found a free slot for a key */
797 /* No free slot found */
801 static int ath_key_config(struct ath_softc *sc,
803 struct ieee80211_key_conf *key)
805 struct ath9k_keyval hk;
806 const u8 *mac = NULL;
810 memset(&hk, 0, sizeof(hk));
814 hk.kv_type = ATH9K_CIPHER_WEP;
817 hk.kv_type = ATH9K_CIPHER_TKIP;
820 hk.kv_type = ATH9K_CIPHER_AES_CCM;
826 hk.kv_len = key->keylen;
827 memcpy(hk.kv_val, key->key, key->keylen);
829 if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
830 /* For now, use the default keys for broadcast keys. This may
831 * need to change with virtual interfaces. */
833 } else if (key->keyidx) {
834 struct ieee80211_vif *vif;
837 vif = sc->sc_vaps[0];
838 if (vif->type != NL80211_IFTYPE_AP) {
839 /* Only keyidx 0 should be used with unicast key, but
840 * allow this for client mode for now. */
846 if (key->alg == ALG_TKIP)
847 idx = ath_reserve_key_cache_slot_tkip(sc);
849 idx = ath_reserve_key_cache_slot(sc);
851 return -EIO; /* no free key cache entries */
854 if (key->alg == ALG_TKIP)
855 ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac);
857 ret = ath_keyset(sc, idx, &hk, mac);
862 set_bit(idx, sc->sc_keymap);
863 if (key->alg == ALG_TKIP) {
864 set_bit(idx + 64, sc->sc_keymap);
865 if (sc->sc_splitmic) {
866 set_bit(idx + 32, sc->sc_keymap);
867 set_bit(idx + 64 + 32, sc->sc_keymap);
874 static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
876 ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx);
877 if (key->hw_key_idx < IEEE80211_WEP_NKID)
880 clear_bit(key->hw_key_idx, sc->sc_keymap);
881 if (key->alg != ALG_TKIP)
884 clear_bit(key->hw_key_idx + 64, sc->sc_keymap);
885 if (sc->sc_splitmic) {
886 clear_bit(key->hw_key_idx + 32, sc->sc_keymap);
887 clear_bit(key->hw_key_idx + 64 + 32, sc->sc_keymap);
891 static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
893 #define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
894 #define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
896 ht_info->ht_supported = true;
897 ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
898 IEEE80211_HT_CAP_SM_PS |
899 IEEE80211_HT_CAP_SGI_40 |
900 IEEE80211_HT_CAP_DSSSCCK40;
902 ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536;
903 ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8;
904 /* set up supported mcs set */
905 memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
906 ht_info->mcs.rx_mask[0] = 0xff;
907 ht_info->mcs.rx_mask[1] = 0xff;
908 ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
911 static void ath9k_bss_assoc_info(struct ath_softc *sc,
912 struct ieee80211_vif *vif,
913 struct ieee80211_bss_conf *bss_conf)
915 struct ath_vap *avp = (void *)vif->drv_priv;
917 if (bss_conf->assoc) {
918 DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
919 bss_conf->aid, sc->sc_curbssid);
921 /* New association, store aid */
922 if (avp->av_opmode == NL80211_IFTYPE_STATION) {
923 sc->sc_curaid = bss_conf->aid;
924 ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid,
928 /* Configure the beacon */
929 ath_beacon_config(sc, 0);
930 sc->sc_flags |= SC_OP_BEACONS;
932 /* Reset rssi stats */
933 sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER;
934 sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER;
935 sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
936 sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
939 mod_timer(&sc->sc_ani.timer,
940 jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
943 DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISSOC\n");
948 /********************************/
950 /********************************/
952 static void ath_led_brightness(struct led_classdev *led_cdev,
953 enum led_brightness brightness)
955 struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
956 struct ath_softc *sc = led->sc;
958 switch (brightness) {
960 if (led->led_type == ATH_LED_ASSOC ||
961 led->led_type == ATH_LED_RADIO)
962 sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
963 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
964 (led->led_type == ATH_LED_RADIO) ? 1 :
965 !!(sc->sc_flags & SC_OP_LED_ASSOCIATED));
968 if (led->led_type == ATH_LED_ASSOC)
969 sc->sc_flags |= SC_OP_LED_ASSOCIATED;
970 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
977 static int ath_register_led(struct ath_softc *sc, struct ath_led *led,
983 led->led_cdev.name = led->name;
984 led->led_cdev.default_trigger = trigger;
985 led->led_cdev.brightness_set = ath_led_brightness;
987 ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
989 DPRINTF(sc, ATH_DBG_FATAL,
990 "Failed to register led:%s", led->name);
996 static void ath_unregister_led(struct ath_led *led)
998 if (led->registered) {
999 led_classdev_unregister(&led->led_cdev);
1000 led->registered = 0;
1004 static void ath_deinit_leds(struct ath_softc *sc)
1006 ath_unregister_led(&sc->assoc_led);
1007 sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
1008 ath_unregister_led(&sc->tx_led);
1009 ath_unregister_led(&sc->rx_led);
1010 ath_unregister_led(&sc->radio_led);
1011 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
1014 static void ath_init_leds(struct ath_softc *sc)
1019 /* Configure gpio 1 for output */
1020 ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
1021 AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
1022 /* LED off, active low */
1023 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
1025 trigger = ieee80211_get_radio_led_name(sc->hw);
1026 snprintf(sc->radio_led.name, sizeof(sc->radio_led.name),
1027 "ath9k-%s:radio", wiphy_name(sc->hw->wiphy));
1028 ret = ath_register_led(sc, &sc->radio_led, trigger);
1029 sc->radio_led.led_type = ATH_LED_RADIO;
1033 trigger = ieee80211_get_assoc_led_name(sc->hw);
1034 snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name),
1035 "ath9k-%s:assoc", wiphy_name(sc->hw->wiphy));
1036 ret = ath_register_led(sc, &sc->assoc_led, trigger);
1037 sc->assoc_led.led_type = ATH_LED_ASSOC;
1041 trigger = ieee80211_get_tx_led_name(sc->hw);
1042 snprintf(sc->tx_led.name, sizeof(sc->tx_led.name),
1043 "ath9k-%s:tx", wiphy_name(sc->hw->wiphy));
1044 ret = ath_register_led(sc, &sc->tx_led, trigger);
1045 sc->tx_led.led_type = ATH_LED_TX;
1049 trigger = ieee80211_get_rx_led_name(sc->hw);
1050 snprintf(sc->rx_led.name, sizeof(sc->rx_led.name),
1051 "ath9k-%s:rx", wiphy_name(sc->hw->wiphy));
1052 ret = ath_register_led(sc, &sc->rx_led, trigger);
1053 sc->rx_led.led_type = ATH_LED_RX;
1060 ath_deinit_leds(sc);
1063 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1065 /*******************/
1067 /*******************/
1069 static void ath_radio_enable(struct ath_softc *sc)
1071 struct ath_hal *ah = sc->sc_ah;
1072 struct ieee80211_channel *channel = sc->hw->conf.channel;
1075 spin_lock_bh(&sc->sc_resetlock);
1077 r = ath9k_hw_reset(ah, ah->ah_curchan, false);
1080 DPRINTF(sc, ATH_DBG_FATAL,
1081 "Unable to reset channel %u (%uMhz) ",
1082 "reset status %u\n",
1083 channel->center_freq, r);
1085 spin_unlock_bh(&sc->sc_resetlock);
1087 ath_update_txpow(sc);
1088 if (ath_startrecv(sc) != 0) {
1089 DPRINTF(sc, ATH_DBG_FATAL,
1090 "Unable to restart recv logic\n");
1094 if (sc->sc_flags & SC_OP_BEACONS)
1095 ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */
1097 /* Re-Enable interrupts */
1098 ath9k_hw_set_interrupts(ah, sc->sc_imask);
1101 ath9k_hw_cfg_output(ah, ATH_LED_PIN,
1102 AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
1103 ath9k_hw_set_gpio(ah, ATH_LED_PIN, 0);
1105 ieee80211_wake_queues(sc->hw);
1108 static void ath_radio_disable(struct ath_softc *sc)
1110 struct ath_hal *ah = sc->sc_ah;
1111 struct ieee80211_channel *channel = sc->hw->conf.channel;
1114 ieee80211_stop_queues(sc->hw);
1117 ath9k_hw_set_gpio(ah, ATH_LED_PIN, 1);
1118 ath9k_hw_cfg_gpio_input(ah, ATH_LED_PIN);
1120 /* Disable interrupts */
1121 ath9k_hw_set_interrupts(ah, 0);
1123 ath_draintxq(sc, false); /* clear pending tx frames */
1124 ath_stoprecv(sc); /* turn off frame recv */
1125 ath_flushrecv(sc); /* flush recv queue */
1127 spin_lock_bh(&sc->sc_resetlock);
1128 r = ath9k_hw_reset(ah, ah->ah_curchan, false);
1130 DPRINTF(sc, ATH_DBG_FATAL,
1131 "Unable to reset channel %u (%uMhz) "
1132 "reset status %u\n",
1133 channel->center_freq, r);
1135 spin_unlock_bh(&sc->sc_resetlock);
1137 ath9k_hw_phy_disable(ah);
1138 ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
1141 static bool ath_is_rfkill_set(struct ath_softc *sc)
1143 struct ath_hal *ah = sc->sc_ah;
1145 return ath9k_hw_gpio_get(ah, ah->ah_rfkill_gpio) ==
1146 ah->ah_rfkill_polarity;
1149 /* h/w rfkill poll function */
1150 static void ath_rfkill_poll(struct work_struct *work)
1152 struct ath_softc *sc = container_of(work, struct ath_softc,
1153 rf_kill.rfkill_poll.work);
1156 if (sc->sc_flags & SC_OP_INVALID)
1159 radio_on = !ath_is_rfkill_set(sc);
1162 * enable/disable radio only when there is a
1163 * state change in RF switch
1165 if (radio_on == !!(sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED)) {
1166 enum rfkill_state state;
1168 if (sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED) {
1169 state = radio_on ? RFKILL_STATE_SOFT_BLOCKED
1170 : RFKILL_STATE_HARD_BLOCKED;
1171 } else if (radio_on) {
1172 ath_radio_enable(sc);
1173 state = RFKILL_STATE_UNBLOCKED;
1175 ath_radio_disable(sc);
1176 state = RFKILL_STATE_HARD_BLOCKED;
1179 if (state == RFKILL_STATE_HARD_BLOCKED)
1180 sc->sc_flags |= SC_OP_RFKILL_HW_BLOCKED;
1182 sc->sc_flags &= ~SC_OP_RFKILL_HW_BLOCKED;
1184 rfkill_force_state(sc->rf_kill.rfkill, state);
1187 queue_delayed_work(sc->hw->workqueue, &sc->rf_kill.rfkill_poll,
1188 msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL));
1191 /* s/w rfkill handler */
1192 static int ath_sw_toggle_radio(void *data, enum rfkill_state state)
1194 struct ath_softc *sc = data;
1197 case RFKILL_STATE_SOFT_BLOCKED:
1198 if (!(sc->sc_flags & (SC_OP_RFKILL_HW_BLOCKED |
1199 SC_OP_RFKILL_SW_BLOCKED)))
1200 ath_radio_disable(sc);
1201 sc->sc_flags |= SC_OP_RFKILL_SW_BLOCKED;
1203 case RFKILL_STATE_UNBLOCKED:
1204 if ((sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED)) {
1205 sc->sc_flags &= ~SC_OP_RFKILL_SW_BLOCKED;
1206 if (sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED) {
1207 DPRINTF(sc, ATH_DBG_FATAL, "Can't turn on the"
1208 "radio as it is disabled by h/w\n");
1211 ath_radio_enable(sc);
1219 /* Init s/w rfkill */
1220 static int ath_init_sw_rfkill(struct ath_softc *sc)
1222 sc->rf_kill.rfkill = rfkill_allocate(wiphy_dev(sc->hw->wiphy),
1224 if (!sc->rf_kill.rfkill) {
1225 DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n");
1229 snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
1230 "ath9k-%s:rfkill", wiphy_name(sc->hw->wiphy));
1231 sc->rf_kill.rfkill->name = sc->rf_kill.rfkill_name;
1232 sc->rf_kill.rfkill->data = sc;
1233 sc->rf_kill.rfkill->toggle_radio = ath_sw_toggle_radio;
1234 sc->rf_kill.rfkill->state = RFKILL_STATE_UNBLOCKED;
1235 sc->rf_kill.rfkill->user_claim_unsupported = 1;
1240 /* Deinitialize rfkill */
1241 static void ath_deinit_rfkill(struct ath_softc *sc)
1243 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
1244 cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
1246 if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) {
1247 rfkill_unregister(sc->rf_kill.rfkill);
1248 sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED;
1249 sc->rf_kill.rfkill = NULL;
1253 static int ath_start_rfkill_poll(struct ath_softc *sc)
1255 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
1256 queue_delayed_work(sc->hw->workqueue,
1257 &sc->rf_kill.rfkill_poll, 0);
1259 if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
1260 if (rfkill_register(sc->rf_kill.rfkill)) {
1261 DPRINTF(sc, ATH_DBG_FATAL,
1262 "Unable to register rfkill\n");
1263 rfkill_free(sc->rf_kill.rfkill);
1265 /* Deinitialize the device */
1268 free_irq(sc->pdev->irq, sc);
1269 pci_iounmap(sc->pdev, sc->mem);
1270 pci_release_region(sc->pdev, 0);
1271 pci_disable_device(sc->pdev);
1272 ieee80211_free_hw(sc->hw);
1275 sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
1281 #endif /* CONFIG_RFKILL */
1283 static void ath_detach(struct ath_softc *sc)
1285 struct ieee80211_hw *hw = sc->hw;
1288 DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
1290 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1291 ath_deinit_rfkill(sc);
1293 ath_deinit_leds(sc);
1295 ieee80211_unregister_hw(hw);
1299 tasklet_kill(&sc->intr_tq);
1300 tasklet_kill(&sc->bcon_tasklet);
1302 if (!(sc->sc_flags & SC_OP_INVALID))
1303 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
1305 /* cleanup tx queues */
1306 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1307 if (ATH_TXQ_SETUP(sc, i))
1308 ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1310 ath9k_hw_detach(sc->sc_ah);
1311 ath9k_exit_debug(sc);
1314 static int ath_init(u16 devid, struct ath_softc *sc)
1316 struct ath_hal *ah = NULL;
1321 /* XXX: hardware will not be ready until ath_open() being called */
1322 sc->sc_flags |= SC_OP_INVALID;
1324 if (ath9k_init_debug(sc) < 0)
1325 printk(KERN_ERR "Unable to create debugfs files\n");
1327 spin_lock_init(&sc->sc_resetlock);
1328 mutex_init(&sc->mutex);
1329 tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
1330 tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
1334 * Cache line size is used to size and align various
1335 * structures used to communicate with the hardware.
1337 bus_read_cachesize(sc, &csz);
1338 /* XXX assert csz is non-zero */
1339 sc->sc_cachelsz = csz << 2; /* convert to bytes */
1341 ah = ath9k_hw_attach(devid, sc, sc->mem, &status);
1343 DPRINTF(sc, ATH_DBG_FATAL,
1344 "Unable to attach hardware; HAL status %u\n", status);
1350 /* Get the hardware key cache size. */
1351 sc->sc_keymax = ah->ah_caps.keycache_size;
1352 if (sc->sc_keymax > ATH_KEYMAX) {
1353 DPRINTF(sc, ATH_DBG_KEYCACHE,
1354 "Warning, using only %u entries in %u key cache\n",
1355 ATH_KEYMAX, sc->sc_keymax);
1356 sc->sc_keymax = ATH_KEYMAX;
1360 * Reset the key cache since some parts do not
1361 * reset the contents on initial power up.
1363 for (i = 0; i < sc->sc_keymax; i++)
1364 ath9k_hw_keyreset(ah, (u16) i);
1366 /* Collect the channel list using the default country code */
1368 error = ath_setup_channels(sc);
1372 /* default to MONITOR mode */
1373 sc->sc_ah->ah_opmode = NL80211_IFTYPE_MONITOR;
1376 /* Setup rate tables */
1378 ath_rate_attach(sc);
1379 ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
1380 ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
1383 * Allocate hardware transmit queues: one queue for
1384 * beacon frames and one data queue for each QoS
1385 * priority. Note that the hal handles reseting
1386 * these queues at the needed time.
1388 sc->beacon.beaconq = ath_beaconq_setup(ah);
1389 if (sc->beacon.beaconq == -1) {
1390 DPRINTF(sc, ATH_DBG_FATAL,
1391 "Unable to setup a beacon xmit queue\n");
1395 sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
1396 if (sc->beacon.cabq == NULL) {
1397 DPRINTF(sc, ATH_DBG_FATAL,
1398 "Unable to setup CAB xmit queue\n");
1403 sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME;
1404 ath_cabq_update(sc);
1406 for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
1407 sc->tx.hwq_map[i] = -1;
1409 /* Setup data queues */
1410 /* NB: ensure BK queue is the lowest priority h/w queue */
1411 if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
1412 DPRINTF(sc, ATH_DBG_FATAL,
1413 "Unable to setup xmit queue for BK traffic\n");
1418 if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
1419 DPRINTF(sc, ATH_DBG_FATAL,
1420 "Unable to setup xmit queue for BE traffic\n");
1424 if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
1425 DPRINTF(sc, ATH_DBG_FATAL,
1426 "Unable to setup xmit queue for VI traffic\n");
1430 if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
1431 DPRINTF(sc, ATH_DBG_FATAL,
1432 "Unable to setup xmit queue for VO traffic\n");
1437 /* Initializes the noise floor to a reasonable default value.
1438 * Later on this will be updated during ANI processing. */
1440 sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR;
1441 setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc);
1443 if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1444 ATH9K_CIPHER_TKIP, NULL)) {
1446 * Whether we should enable h/w TKIP MIC.
1447 * XXX: if we don't support WME TKIP MIC, then we wouldn't
1448 * report WMM capable, so it's always safe to turn on
1449 * TKIP MIC in this case.
1451 ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
1456 * Check whether the separate key cache entries
1457 * are required to handle both tx+rx MIC keys.
1458 * With split mic keys the number of stations is limited
1459 * to 27 otherwise 59.
1461 if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1462 ATH9K_CIPHER_TKIP, NULL)
1463 && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1464 ATH9K_CIPHER_MIC, NULL)
1465 && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
1467 sc->sc_splitmic = 1;
1469 /* turn on mcast key search if possible */
1470 if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
1471 (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
1474 sc->sc_config.txpowlimit = ATH_TXPOWER_MAX;
1475 sc->sc_config.txpowlimit_override = 0;
1477 /* 11n Capabilities */
1478 if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
1479 sc->sc_flags |= SC_OP_TXAGGR;
1480 sc->sc_flags |= SC_OP_RXAGGR;
1483 sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask;
1484 sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask;
1486 ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
1487 sc->rx.defant = ath9k_hw_getdefantenna(ah);
1489 ath9k_hw_getmac(ah, sc->sc_myaddr);
1490 if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) {
1491 ath9k_hw_getbssidmask(ah, sc->sc_bssidmask);
1492 ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask);
1493 ath9k_hw_setbssidmask(ah, sc->sc_bssidmask);
1496 sc->beacon.slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */
1498 /* initialize beacon slots */
1499 for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++)
1500 sc->beacon.bslot[i] = ATH_IF_ID_ANY;
1502 /* save MISC configurations */
1503 sc->sc_config.swBeaconProcess = 1;
1505 /* setup channels and rates */
1507 sc->sbands[IEEE80211_BAND_2GHZ].channels =
1508 sc->channels[IEEE80211_BAND_2GHZ];
1509 sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
1510 sc->rates[IEEE80211_BAND_2GHZ];
1511 sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
1513 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) {
1514 sc->sbands[IEEE80211_BAND_5GHZ].channels =
1515 sc->channels[IEEE80211_BAND_5GHZ];
1516 sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
1517 sc->rates[IEEE80211_BAND_5GHZ];
1518 sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
1523 /* cleanup tx queues */
1524 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1525 if (ATH_TXQ_SETUP(sc, i))
1526 ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1529 ath9k_hw_detach(ah);
1534 static int ath_attach(u16 devid, struct ath_softc *sc)
1536 struct ieee80211_hw *hw = sc->hw;
1539 DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
1541 error = ath_init(devid, sc);
1545 /* get mac address from hardware and set in mac80211 */
1547 SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr);
1549 hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
1550 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1551 IEEE80211_HW_SIGNAL_DBM |
1552 IEEE80211_HW_AMPDU_AGGREGATION;
1554 hw->wiphy->interface_modes =
1555 BIT(NL80211_IFTYPE_AP) |
1556 BIT(NL80211_IFTYPE_STATION) |
1557 BIT(NL80211_IFTYPE_ADHOC);
1561 hw->max_rate_tries = ATH_11N_TXMAXTRY;
1562 hw->sta_data_size = sizeof(struct ath_node);
1563 hw->vif_data_size = sizeof(struct ath_vap);
1565 hw->rate_control_algorithm = "ath9k_rate_control";
1567 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
1568 setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
1569 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes))
1570 setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
1573 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &sc->sbands[IEEE80211_BAND_2GHZ];
1574 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes))
1575 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
1576 &sc->sbands[IEEE80211_BAND_5GHZ];
1578 /* initialize tx/rx engine */
1579 error = ath_tx_init(sc, ATH_TXBUF);
1583 error = ath_rx_init(sc, ATH_RXBUF);
1587 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1588 /* Initialze h/w Rfkill */
1589 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
1590 INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
1592 /* Initialize s/w rfkill */
1593 if (ath_init_sw_rfkill(sc))
1597 error = ieee80211_register_hw(hw);
1599 /* Initialize LED control */
1608 int ath_reset(struct ath_softc *sc, bool retry_tx)
1610 struct ath_hal *ah = sc->sc_ah;
1611 struct ieee80211_hw *hw = sc->hw;
1614 ath9k_hw_set_interrupts(ah, 0);
1615 ath_draintxq(sc, retry_tx);
1619 spin_lock_bh(&sc->sc_resetlock);
1620 r = ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, false);
1622 DPRINTF(sc, ATH_DBG_FATAL,
1623 "Unable to reset hardware; reset status %u\n", r);
1624 spin_unlock_bh(&sc->sc_resetlock);
1626 if (ath_startrecv(sc) != 0)
1627 DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
1630 * We may be doing a reset in response to a request
1631 * that changes the channel so update any state that
1632 * might change as a result.
1634 ath_cache_conf_rate(sc, &hw->conf);
1636 ath_update_txpow(sc);
1638 if (sc->sc_flags & SC_OP_BEACONS)
1639 ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */
1641 ath9k_hw_set_interrupts(ah, sc->sc_imask);
1645 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
1646 if (ATH_TXQ_SETUP(sc, i)) {
1647 spin_lock_bh(&sc->tx.txq[i].axq_lock);
1648 ath_txq_schedule(sc, &sc->tx.txq[i]);
1649 spin_unlock_bh(&sc->tx.txq[i].axq_lock);
1658 * This function will allocate both the DMA descriptor structure, and the
1659 * buffers it contains. These are used to contain the descriptors used
1662 int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
1663 struct list_head *head, const char *name,
1664 int nbuf, int ndesc)
1666 #define DS2PHYS(_dd, _ds) \
1667 ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
1668 #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
1669 #define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
1671 struct ath_desc *ds;
1673 int i, bsize, error;
1675 DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
1678 /* ath_desc must be a multiple of DWORDs */
1679 if ((sizeof(struct ath_desc) % 4) != 0) {
1680 DPRINTF(sc, ATH_DBG_FATAL, "ath_desc not DWORD aligned\n");
1681 ASSERT((sizeof(struct ath_desc) % 4) == 0);
1687 dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
1690 * Need additional DMA memory because we can't use
1691 * descriptors that cross the 4K page boundary. Assume
1692 * one skipped descriptor per 4K page.
1694 if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
1696 ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
1699 while (ndesc_skipped) {
1700 dma_len = ndesc_skipped * sizeof(struct ath_desc);
1701 dd->dd_desc_len += dma_len;
1703 ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
1707 /* allocate descriptors */
1708 dd->dd_desc = pci_alloc_consistent(sc->pdev,
1710 &dd->dd_desc_paddr);
1711 if (dd->dd_desc == NULL) {
1716 DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
1717 dd->dd_name, ds, (u32) dd->dd_desc_len,
1718 ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
1720 /* allocate buffers */
1721 bsize = sizeof(struct ath_buf) * nbuf;
1722 bf = kmalloc(bsize, GFP_KERNEL);
1727 memset(bf, 0, bsize);
1730 INIT_LIST_HEAD(head);
1731 for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
1733 bf->bf_daddr = DS2PHYS(dd, ds);
1735 if (!(sc->sc_ah->ah_caps.hw_caps &
1736 ATH9K_HW_CAP_4KB_SPLITTRANS)) {
1738 * Skip descriptor addresses which can cause 4KB
1739 * boundary crossing (addr + length) with a 32 dword
1742 while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
1743 ASSERT((caddr_t) bf->bf_desc <
1744 ((caddr_t) dd->dd_desc +
1749 bf->bf_daddr = DS2PHYS(dd, ds);
1752 list_add_tail(&bf->list, head);
1756 pci_free_consistent(sc->pdev,
1757 dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
1759 memset(dd, 0, sizeof(*dd));
1761 #undef ATH_DESC_4KB_BOUND_CHECK
1762 #undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
1766 void ath_descdma_cleanup(struct ath_softc *sc,
1767 struct ath_descdma *dd,
1768 struct list_head *head)
1770 pci_free_consistent(sc->pdev,
1771 dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
1773 INIT_LIST_HEAD(head);
1774 kfree(dd->dd_bufptr);
1775 memset(dd, 0, sizeof(*dd));
1778 int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
1784 qnum = sc->tx.hwq_map[ATH9K_WME_AC_VO];
1787 qnum = sc->tx.hwq_map[ATH9K_WME_AC_VI];
1790 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
1793 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BK];
1796 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
1803 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
1808 case ATH9K_WME_AC_VO:
1811 case ATH9K_WME_AC_VI:
1814 case ATH9K_WME_AC_BE:
1817 case ATH9K_WME_AC_BK:
1828 /**********************/
1829 /* mac80211 callbacks */
1830 /**********************/
1832 static int ath9k_start(struct ieee80211_hw *hw)
1834 struct ath_softc *sc = hw->priv;
1835 struct ieee80211_channel *curchan = hw->conf.channel;
1836 struct ath9k_channel *init_channel;
1839 DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
1840 "initial channel: %d MHz\n", curchan->center_freq);
1842 /* setup initial channel */
1844 pos = ath_get_channel(sc, curchan);
1846 DPRINTF(sc, ATH_DBG_FATAL, "Invalid channel: %d\n", curchan->center_freq);
1850 sc->tx_chan_width = ATH9K_HT_MACMODE_20;
1851 sc->sc_ah->ah_channels[pos].chanmode =
1852 (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A;
1853 init_channel = &sc->sc_ah->ah_channels[pos];
1855 /* Reset SERDES registers */
1856 ath9k_hw_configpcipowersave(sc->sc_ah, 0);
1859 * The basic interface to setting the hardware in a good
1860 * state is ``reset''. On return the hardware is known to
1861 * be powered up and with interrupts disabled. This must
1862 * be followed by initialization of the appropriate bits
1863 * and then setup of the interrupt mask.
1865 spin_lock_bh(&sc->sc_resetlock);
1866 r = ath9k_hw_reset(sc->sc_ah, init_channel, false);
1868 DPRINTF(sc, ATH_DBG_FATAL,
1869 "Unable to reset hardware; reset status %u "
1870 "(freq %u MHz)\n", r,
1871 curchan->center_freq);
1872 spin_unlock_bh(&sc->sc_resetlock);
1875 spin_unlock_bh(&sc->sc_resetlock);
1878 * This is needed only to setup initial state
1879 * but it's best done after a reset.
1881 ath_update_txpow(sc);
1884 * Setup the hardware after reset:
1885 * The receive engine is set going.
1886 * Frame transmit is handled entirely
1887 * in the frame output path; there's nothing to do
1888 * here except setup the interrupt mask.
1890 if (ath_startrecv(sc) != 0) {
1891 DPRINTF(sc, ATH_DBG_FATAL,
1892 "Unable to start recv logic\n");
1896 /* Setup our intr mask. */
1897 sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX
1898 | ATH9K_INT_RXEOL | ATH9K_INT_RXORN
1899 | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
1901 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT)
1902 sc->sc_imask |= ATH9K_INT_GTT;
1904 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
1905 sc->sc_imask |= ATH9K_INT_CST;
1908 * Enable MIB interrupts when there are hardware phy counters.
1909 * Note we only do this (at the moment) for station mode.
1911 if (ath9k_hw_phycounters(sc->sc_ah) &&
1912 ((sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) ||
1913 (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC)))
1914 sc->sc_imask |= ATH9K_INT_MIB;
1916 * Some hardware processes the TIM IE and fires an
1917 * interrupt when the TIM bit is set. For hardware
1918 * that does, if not overridden by configuration,
1919 * enable the TIM interrupt when operating as station.
1921 if ((sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
1922 (sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) &&
1923 !sc->sc_config.swBeaconProcess)
1924 sc->sc_imask |= ATH9K_INT_TIM;
1926 ath_cache_conf_rate(sc, &hw->conf);
1928 sc->sc_flags &= ~SC_OP_INVALID;
1930 /* Disable BMISS interrupt when we're not associated */
1931 sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
1932 ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
1934 ieee80211_wake_queues(sc->hw);
1936 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1937 r = ath_start_rfkill_poll(sc);
1942 static int ath9k_tx(struct ieee80211_hw *hw,
1943 struct sk_buff *skb)
1945 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1946 struct ath_softc *sc = hw->priv;
1947 struct ath_tx_control txctl;
1948 int hdrlen, padsize;
1950 memset(&txctl, 0, sizeof(struct ath_tx_control));
1953 * As a temporary workaround, assign seq# here; this will likely need
1954 * to be cleaned up to work better with Beacon transmission and virtual
1957 if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
1958 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1959 if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
1960 sc->tx.seq_no += 0x10;
1961 hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
1962 hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
1965 /* Add the padding after the header if this is not already done */
1966 hdrlen = ieee80211_get_hdrlen_from_skb(skb);
1968 padsize = hdrlen % 4;
1969 if (skb_headroom(skb) < padsize)
1971 skb_push(skb, padsize);
1972 memmove(skb->data, skb->data + padsize, hdrlen);
1975 /* Check if a tx queue is available */
1977 txctl.txq = ath_test_get_txq(sc, skb);
1981 DPRINTF(sc, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
1983 if (ath_tx_start(sc, skb, &txctl) != 0) {
1984 DPRINTF(sc, ATH_DBG_XMIT, "TX failed\n");
1990 dev_kfree_skb_any(skb);
1994 static void ath9k_stop(struct ieee80211_hw *hw)
1996 struct ath_softc *sc = hw->priv;
1998 if (sc->sc_flags & SC_OP_INVALID) {
1999 DPRINTF(sc, ATH_DBG_ANY, "Device not present\n");
2003 DPRINTF(sc, ATH_DBG_CONFIG, "Cleaning up\n");
2005 ieee80211_stop_queues(sc->hw);
2007 /* make sure h/w will not generate any interrupt
2008 * before setting the invalid flag. */
2009 ath9k_hw_set_interrupts(sc->sc_ah, 0);
2011 if (!(sc->sc_flags & SC_OP_INVALID)) {
2012 ath_draintxq(sc, false);
2014 ath9k_hw_phy_disable(sc->sc_ah);
2016 sc->rx.rxlink = NULL;
2018 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
2019 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
2020 cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
2022 /* disable HAL and put h/w to sleep */
2023 ath9k_hw_disable(sc->sc_ah);
2024 ath9k_hw_configpcipowersave(sc->sc_ah, 1);
2026 sc->sc_flags |= SC_OP_INVALID;
2028 DPRINTF(sc, ATH_DBG_CONFIG, "Driver halt\n");
2031 static int ath9k_add_interface(struct ieee80211_hw *hw,
2032 struct ieee80211_if_init_conf *conf)
2034 struct ath_softc *sc = hw->priv;
2035 struct ath_vap *avp = (void *)conf->vif->drv_priv;
2036 enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
2038 /* Support only vap for now */
2043 switch (conf->type) {
2044 case NL80211_IFTYPE_STATION:
2045 ic_opmode = NL80211_IFTYPE_STATION;
2047 case NL80211_IFTYPE_ADHOC:
2048 ic_opmode = NL80211_IFTYPE_ADHOC;
2050 case NL80211_IFTYPE_AP:
2051 ic_opmode = NL80211_IFTYPE_AP;
2054 DPRINTF(sc, ATH_DBG_FATAL,
2055 "Interface type %d not yet supported\n", conf->type);
2059 DPRINTF(sc, ATH_DBG_CONFIG, "Attach a VAP of type: %d\n", ic_opmode);
2061 /* Set the VAP opmode */
2062 avp->av_opmode = ic_opmode;
2065 if (ic_opmode == NL80211_IFTYPE_AP)
2066 ath9k_hw_set_tsfadjust(sc->sc_ah, 1);
2068 sc->sc_vaps[0] = conf->vif;
2071 /* Set the device opmode */
2072 sc->sc_ah->ah_opmode = ic_opmode;
2074 if (conf->type == NL80211_IFTYPE_AP) {
2075 /* TODO: is this a suitable place to start ANI for AP mode? */
2077 mod_timer(&sc->sc_ani.timer,
2078 jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
2084 static void ath9k_remove_interface(struct ieee80211_hw *hw,
2085 struct ieee80211_if_init_conf *conf)
2087 struct ath_softc *sc = hw->priv;
2088 struct ath_vap *avp = (void *)conf->vif->drv_priv;
2090 DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n");
2093 del_timer_sync(&sc->sc_ani.timer);
2095 /* Reclaim beacon resources */
2096 if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP ||
2097 sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC) {
2098 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
2099 ath_beacon_return(sc, avp);
2102 sc->sc_flags &= ~SC_OP_BEACONS;
2104 sc->sc_vaps[0] = NULL;
2108 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
2110 struct ath_softc *sc = hw->priv;
2111 struct ieee80211_conf *conf = &hw->conf;
2113 mutex_lock(&sc->mutex);
2114 if (changed & (IEEE80211_CONF_CHANGE_CHANNEL |
2115 IEEE80211_CONF_CHANGE_HT)) {
2116 struct ieee80211_channel *curchan = hw->conf.channel;
2119 DPRINTF(sc, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
2120 curchan->center_freq);
2122 pos = ath_get_channel(sc, curchan);
2124 DPRINTF(sc, ATH_DBG_FATAL, "Invalid channel: %d\n",
2125 curchan->center_freq);
2126 mutex_unlock(&sc->mutex);
2130 sc->tx_chan_width = ATH9K_HT_MACMODE_20;
2131 sc->sc_ah->ah_channels[pos].chanmode =
2132 (curchan->band == IEEE80211_BAND_2GHZ) ?
2133 CHANNEL_G : CHANNEL_A;
2135 if (conf->ht.enabled) {
2136 if (conf->ht.channel_type == NL80211_CHAN_HT40PLUS ||
2137 conf->ht.channel_type == NL80211_CHAN_HT40MINUS)
2138 sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
2140 sc->sc_ah->ah_channels[pos].chanmode =
2141 ath_get_extchanmode(sc, curchan,
2142 conf->ht.channel_type);
2145 ath_update_chainmask(sc, conf->ht.enabled);
2147 if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
2148 DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
2149 mutex_unlock(&sc->mutex);
2154 if (changed & IEEE80211_CONF_CHANGE_POWER)
2155 sc->sc_config.txpowlimit = 2 * conf->power_level;
2157 mutex_unlock(&sc->mutex);
2161 static int ath9k_config_interface(struct ieee80211_hw *hw,
2162 struct ieee80211_vif *vif,
2163 struct ieee80211_if_conf *conf)
2165 struct ath_softc *sc = hw->priv;
2166 struct ath_hal *ah = sc->sc_ah;
2167 struct ath_vap *avp = (void *)vif->drv_priv;
2171 /* TODO: Need to decide which hw opmode to use for multi-interface
2173 if (vif->type == NL80211_IFTYPE_AP &&
2174 ah->ah_opmode != NL80211_IFTYPE_AP) {
2175 ah->ah_opmode = NL80211_IFTYPE_STATION;
2176 ath9k_hw_setopmode(ah);
2177 ath9k_hw_write_associd(ah, sc->sc_myaddr, 0);
2178 /* Request full reset to get hw opmode changed properly */
2179 sc->sc_flags |= SC_OP_FULL_RESET;
2182 if ((conf->changed & IEEE80211_IFCC_BSSID) &&
2183 !is_zero_ether_addr(conf->bssid)) {
2184 switch (vif->type) {
2185 case NL80211_IFTYPE_STATION:
2186 case NL80211_IFTYPE_ADHOC:
2188 memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN);
2190 ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid,
2193 /* Set aggregation protection mode parameters */
2194 sc->sc_config.ath_aggr_prot = 0;
2196 DPRINTF(sc, ATH_DBG_CONFIG,
2197 "RX filter 0x%x bssid %pM aid 0x%x\n",
2198 rfilt, sc->sc_curbssid, sc->sc_curaid);
2200 /* need to reconfigure the beacon */
2201 sc->sc_flags &= ~SC_OP_BEACONS ;
2209 if ((conf->changed & IEEE80211_IFCC_BEACON) &&
2210 ((vif->type == NL80211_IFTYPE_ADHOC) ||
2211 (vif->type == NL80211_IFTYPE_AP))) {
2213 * Allocate and setup the beacon frame.
2215 * Stop any previous beacon DMA. This may be
2216 * necessary, for example, when an ibss merge
2217 * causes reconfiguration; we may be called
2218 * with beacon transmission active.
2220 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
2222 error = ath_beacon_alloc(sc, 0);
2226 ath_beacon_sync(sc, 0);
2229 /* Check for WLAN_CAPABILITY_PRIVACY ? */
2230 if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
2231 for (i = 0; i < IEEE80211_WEP_NKID; i++)
2232 if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
2233 ath9k_hw_keysetmac(sc->sc_ah,
2238 /* Only legacy IBSS for now */
2239 if (vif->type == NL80211_IFTYPE_ADHOC)
2240 ath_update_chainmask(sc, 0);
2245 #define SUPPORTED_FILTERS \
2246 (FIF_PROMISC_IN_BSS | \
2250 FIF_BCN_PRBRESP_PROMISC | \
2253 /* FIXME: sc->sc_full_reset ? */
2254 static void ath9k_configure_filter(struct ieee80211_hw *hw,
2255 unsigned int changed_flags,
2256 unsigned int *total_flags,
2258 struct dev_mc_list *mclist)
2260 struct ath_softc *sc = hw->priv;
2263 changed_flags &= SUPPORTED_FILTERS;
2264 *total_flags &= SUPPORTED_FILTERS;
2266 sc->rx.rxfilter = *total_flags;
2267 rfilt = ath_calcrxfilter(sc);
2268 ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
2270 if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
2271 if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
2272 ath9k_hw_write_associd(sc->sc_ah, ath_bcast_mac, 0);
2275 DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
2278 static void ath9k_sta_notify(struct ieee80211_hw *hw,
2279 struct ieee80211_vif *vif,
2280 enum sta_notify_cmd cmd,
2281 struct ieee80211_sta *sta)
2283 struct ath_softc *sc = hw->priv;
2286 case STA_NOTIFY_ADD:
2287 ath_node_attach(sc, sta);
2289 case STA_NOTIFY_REMOVE:
2290 ath_node_detach(sc, sta);
2297 static int ath9k_conf_tx(struct ieee80211_hw *hw,
2299 const struct ieee80211_tx_queue_params *params)
2301 struct ath_softc *sc = hw->priv;
2302 struct ath9k_tx_queue_info qi;
2305 if (queue >= WME_NUM_AC)
2308 qi.tqi_aifs = params->aifs;
2309 qi.tqi_cwmin = params->cw_min;
2310 qi.tqi_cwmax = params->cw_max;
2311 qi.tqi_burstTime = params->txop;
2312 qnum = ath_get_hal_qnum(queue, sc);
2314 DPRINTF(sc, ATH_DBG_CONFIG,
2315 "Configure tx [queue/halq] [%d/%d], "
2316 "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
2317 queue, qnum, params->aifs, params->cw_min,
2318 params->cw_max, params->txop);
2320 ret = ath_txq_update(sc, qnum, &qi);
2322 DPRINTF(sc, ATH_DBG_FATAL, "TXQ Update failed\n");
2327 static int ath9k_set_key(struct ieee80211_hw *hw,
2328 enum set_key_cmd cmd,
2329 const u8 *local_addr,
2331 struct ieee80211_key_conf *key)
2333 struct ath_softc *sc = hw->priv;
2336 DPRINTF(sc, ATH_DBG_KEYCACHE, "Set HW Key\n");
2340 ret = ath_key_config(sc, addr, key);
2342 key->hw_key_idx = ret;
2343 /* push IV and Michael MIC generation to stack */
2344 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
2345 if (key->alg == ALG_TKIP)
2346 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
2351 ath_key_delete(sc, key);
2360 static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
2361 struct ieee80211_vif *vif,
2362 struct ieee80211_bss_conf *bss_conf,
2365 struct ath_softc *sc = hw->priv;
2367 if (changed & BSS_CHANGED_ERP_PREAMBLE) {
2368 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
2369 bss_conf->use_short_preamble);
2370 if (bss_conf->use_short_preamble)
2371 sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
2373 sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
2376 if (changed & BSS_CHANGED_ERP_CTS_PROT) {
2377 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
2378 bss_conf->use_cts_prot);
2379 if (bss_conf->use_cts_prot &&
2380 hw->conf.channel->band != IEEE80211_BAND_5GHZ)
2381 sc->sc_flags |= SC_OP_PROTECT_ENABLE;
2383 sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
2386 if (changed & BSS_CHANGED_ASSOC) {
2387 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
2389 ath9k_bss_assoc_info(sc, vif, bss_conf);
2393 static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
2396 struct ath_softc *sc = hw->priv;
2397 struct ath_hal *ah = sc->sc_ah;
2399 tsf = ath9k_hw_gettsf64(ah);
2404 static void ath9k_reset_tsf(struct ieee80211_hw *hw)
2406 struct ath_softc *sc = hw->priv;
2407 struct ath_hal *ah = sc->sc_ah;
2409 ath9k_hw_reset_tsf(ah);
2412 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
2413 enum ieee80211_ampdu_mlme_action action,
2414 struct ieee80211_sta *sta,
2417 struct ath_softc *sc = hw->priv;
2421 case IEEE80211_AMPDU_RX_START:
2422 if (!(sc->sc_flags & SC_OP_RXAGGR))
2425 case IEEE80211_AMPDU_RX_STOP:
2427 case IEEE80211_AMPDU_TX_START:
2428 ret = ath_tx_aggr_start(sc, sta, tid, ssn);
2430 DPRINTF(sc, ATH_DBG_FATAL,
2431 "Unable to start TX aggregation\n");
2433 ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
2435 case IEEE80211_AMPDU_TX_STOP:
2436 ret = ath_tx_aggr_stop(sc, sta, tid);
2438 DPRINTF(sc, ATH_DBG_FATAL,
2439 "Unable to stop TX aggregation\n");
2441 ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
2443 case IEEE80211_AMPDU_TX_RESUME:
2444 ath_tx_aggr_resume(sc, sta, tid);
2447 DPRINTF(sc, ATH_DBG_FATAL, "Unknown AMPDU action\n");
2453 static struct ieee80211_ops ath9k_ops = {
2455 .start = ath9k_start,
2457 .add_interface = ath9k_add_interface,
2458 .remove_interface = ath9k_remove_interface,
2459 .config = ath9k_config,
2460 .config_interface = ath9k_config_interface,
2461 .configure_filter = ath9k_configure_filter,
2462 .sta_notify = ath9k_sta_notify,
2463 .conf_tx = ath9k_conf_tx,
2464 .bss_info_changed = ath9k_bss_info_changed,
2465 .set_key = ath9k_set_key,
2466 .get_tsf = ath9k_get_tsf,
2467 .reset_tsf = ath9k_reset_tsf,
2468 .ampdu_action = ath9k_ampdu_action,
2474 } ath_mac_bb_names[] = {
2475 { AR_SREV_VERSION_5416_PCI, "5416" },
2476 { AR_SREV_VERSION_5416_PCIE, "5418" },
2477 { AR_SREV_VERSION_9100, "9100" },
2478 { AR_SREV_VERSION_9160, "9160" },
2479 { AR_SREV_VERSION_9280, "9280" },
2480 { AR_SREV_VERSION_9285, "9285" }
2486 } ath_rf_names[] = {
2488 { AR_RAD5133_SREV_MAJOR, "5133" },
2489 { AR_RAD5122_SREV_MAJOR, "5122" },
2490 { AR_RAD2133_SREV_MAJOR, "2133" },
2491 { AR_RAD2122_SREV_MAJOR, "2122" }
2495 * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
2498 ath_mac_bb_name(u32 mac_bb_version)
2502 for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) {
2503 if (ath_mac_bb_names[i].version == mac_bb_version) {
2504 return ath_mac_bb_names[i].name;
2512 * Return the RF name. "????" is returned if the RF is unknown.
2515 ath_rf_name(u16 rf_version)
2519 for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) {
2520 if (ath_rf_names[i].version == rf_version) {
2521 return ath_rf_names[i].name;
2528 static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
2531 struct ath_softc *sc;
2532 struct ieee80211_hw *hw;
2538 if (pci_enable_device(pdev))
2541 ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
2544 printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
2548 ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
2551 printk(KERN_ERR "ath9k: 32-bit DMA consistent "
2552 "DMA enable failed\n");
2557 * Cache line size is used to size and align various
2558 * structures used to communicate with the hardware.
2560 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
2563 * Linux 2.4.18 (at least) writes the cache line size
2564 * register as a 16-bit wide register which is wrong.
2565 * We must have this setup properly for rx buffer
2566 * DMA to work so force a reasonable value here if it
2569 csz = L1_CACHE_BYTES / sizeof(u32);
2570 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
2573 * The default setting of latency timer yields poor results,
2574 * set it to the value used by other systems. It may be worth
2575 * tweaking this setting more.
2577 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
2579 pci_set_master(pdev);
2582 * Disable the RETRY_TIMEOUT register (0x41) to keep
2583 * PCI Tx retries from interfering with C3 CPU state.
2585 pci_read_config_dword(pdev, 0x40, &val);
2586 if ((val & 0x0000ff00) != 0)
2587 pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
2589 ret = pci_request_region(pdev, 0, "ath9k");
2591 dev_err(&pdev->dev, "PCI memory region reserve error\n");
2596 mem = pci_iomap(pdev, 0, 0);
2598 printk(KERN_ERR "PCI memory map error\n") ;
2603 hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
2605 printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
2609 SET_IEEE80211_DEV(hw, &pdev->dev);
2610 pci_set_drvdata(pdev, hw);
2617 if (ath_attach(id->device, sc) != 0) {
2622 /* setup interrupt service routine */
2624 if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
2625 printk(KERN_ERR "%s: request_irq failed\n",
2626 wiphy_name(hw->wiphy));
2633 "%s: Atheros AR%s MAC/BB Rev:%x "
2634 "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
2635 wiphy_name(hw->wiphy),
2636 ath_mac_bb_name(ah->ah_macVersion),
2638 ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
2640 (unsigned long)mem, pdev->irq);
2646 ieee80211_free_hw(hw);
2648 pci_iounmap(pdev, mem);
2650 pci_release_region(pdev, 0);
2652 pci_disable_device(pdev);
2656 static void ath_pci_remove(struct pci_dev *pdev)
2658 struct ieee80211_hw *hw = pci_get_drvdata(pdev);
2659 struct ath_softc *sc = hw->priv;
2663 free_irq(pdev->irq, sc);
2664 pci_iounmap(pdev, sc->mem);
2665 pci_release_region(pdev, 0);
2666 pci_disable_device(pdev);
2667 ieee80211_free_hw(hw);
2672 static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
2674 struct ieee80211_hw *hw = pci_get_drvdata(pdev);
2675 struct ath_softc *sc = hw->priv;
2677 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
2679 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
2680 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
2681 cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
2684 pci_save_state(pdev);
2685 pci_disable_device(pdev);
2686 pci_set_power_state(pdev, 3);
2691 static int ath_pci_resume(struct pci_dev *pdev)
2693 struct ieee80211_hw *hw = pci_get_drvdata(pdev);
2694 struct ath_softc *sc = hw->priv;
2698 err = pci_enable_device(pdev);
2701 pci_restore_state(pdev);
2703 * Suspend/Resume resets the PCI configuration space, so we have to
2704 * re-disable the RETRY_TIMEOUT register (0x41) to keep
2705 * PCI Tx retries from interfering with C3 CPU state
2707 pci_read_config_dword(pdev, 0x40, &val);
2708 if ((val & 0x0000ff00) != 0)
2709 pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
2712 ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
2713 AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
2714 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
2716 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
2718 * check the h/w rfkill state on resume
2719 * and start the rfkill poll timer
2721 if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
2722 queue_delayed_work(sc->hw->workqueue,
2723 &sc->rf_kill.rfkill_poll, 0);
2729 #endif /* CONFIG_PM */
2731 MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
2733 static struct pci_driver ath_pci_driver = {
2735 .id_table = ath_pci_id_table,
2736 .probe = ath_pci_probe,
2737 .remove = ath_pci_remove,
2739 .suspend = ath_pci_suspend,
2740 .resume = ath_pci_resume,
2741 #endif /* CONFIG_PM */
2744 static int __init init_ath_pci(void)
2748 printk(KERN_INFO "%s: %s\n", dev_info, ATH_PCI_VERSION);
2750 /* Register rate control algorithm */
2751 error = ath_rate_control_register();
2754 "Unable to register rate control algorithm: %d\n",
2756 ath_rate_control_unregister();
2760 if (pci_register_driver(&ath_pci_driver) < 0) {
2762 "ath_pci: No devices found, driver not installed.\n");
2763 ath_rate_control_unregister();
2764 pci_unregister_driver(&ath_pci_driver);
2770 module_init(init_ath_pci);
2772 static void __exit exit_ath_pci(void)
2774 ath_rate_control_unregister();
2775 pci_unregister_driver(&ath_pci_driver);
2776 printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
2778 module_exit(exit_ath_pci);