drivers/net/e1000/e1000_main.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2006 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include "e1000.h"
  30
  31 char e1000_driver_name[] = "e1000";
  32 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
  33 #ifndef CONFIG_E1000_NAPI
  34 #define DRIVERNAPI
  35 #else
  36 #define DRIVERNAPI "-NAPI"
  37 #endif
  38 #define DRV_VERSION "7.2.9-k4"DRIVERNAPI
  39 char e1000_driver_version[] = DRV_VERSION;
  40 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
  41
  42 /* e1000_pci_tbl - PCI Device ID Table
  43  *
  44  * Last entry must be all 0s
  45  *
  46  * Macro expands to...
  47  *   {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  48  */
  49 static struct pci_device_id e1000_pci_tbl[] = {
  50         INTEL_E1000_ETHERNET_DEVICE(0x1000),
  51         INTEL_E1000_ETHERNET_DEVICE(0x1001),
  52         INTEL_E1000_ETHERNET_DEVICE(0x1004),
  53         INTEL_E1000_ETHERNET_DEVICE(0x1008),
  54         INTEL_E1000_ETHERNET_DEVICE(0x1009),
  55         INTEL_E1000_ETHERNET_DEVICE(0x100C),
  56         INTEL_E1000_ETHERNET_DEVICE(0x100D),
  57         INTEL_E1000_ETHERNET_DEVICE(0x100E),
  58         INTEL_E1000_ETHERNET_DEVICE(0x100F),
  59         INTEL_E1000_ETHERNET_DEVICE(0x1010),
  60         INTEL_E1000_ETHERNET_DEVICE(0x1011),
  61         INTEL_E1000_ETHERNET_DEVICE(0x1012),
  62         INTEL_E1000_ETHERNET_DEVICE(0x1013),
  63         INTEL_E1000_ETHERNET_DEVICE(0x1014),
  64         INTEL_E1000_ETHERNET_DEVICE(0x1015),
  65         INTEL_E1000_ETHERNET_DEVICE(0x1016),
  66         INTEL_E1000_ETHERNET_DEVICE(0x1017),
  67         INTEL_E1000_ETHERNET_DEVICE(0x1018),
  68         INTEL_E1000_ETHERNET_DEVICE(0x1019),
  69         INTEL_E1000_ETHERNET_DEVICE(0x101A),
  70         INTEL_E1000_ETHERNET_DEVICE(0x101D),
  71         INTEL_E1000_ETHERNET_DEVICE(0x101E),
  72         INTEL_E1000_ETHERNET_DEVICE(0x1026),
  73         INTEL_E1000_ETHERNET_DEVICE(0x1027),
  74         INTEL_E1000_ETHERNET_DEVICE(0x1028),
  75         INTEL_E1000_ETHERNET_DEVICE(0x1049),
  76         INTEL_E1000_ETHERNET_DEVICE(0x104A),
  77         INTEL_E1000_ETHERNET_DEVICE(0x104B),
  78         INTEL_E1000_ETHERNET_DEVICE(0x104C),
  79         INTEL_E1000_ETHERNET_DEVICE(0x104D),
  80         INTEL_E1000_ETHERNET_DEVICE(0x105E),
  81         INTEL_E1000_ETHERNET_DEVICE(0x105F),
  82         INTEL_E1000_ETHERNET_DEVICE(0x1060),
  83         INTEL_E1000_ETHERNET_DEVICE(0x1075),
  84         INTEL_E1000_ETHERNET_DEVICE(0x1076),
  85         INTEL_E1000_ETHERNET_DEVICE(0x1077),
  86         INTEL_E1000_ETHERNET_DEVICE(0x1078),
  87         INTEL_E1000_ETHERNET_DEVICE(0x1079),
  88         INTEL_E1000_ETHERNET_DEVICE(0x107A),
  89         INTEL_E1000_ETHERNET_DEVICE(0x107B),
  90         INTEL_E1000_ETHERNET_DEVICE(0x107C),
  91         INTEL_E1000_ETHERNET_DEVICE(0x107D),
  92         INTEL_E1000_ETHERNET_DEVICE(0x107E),
  93         INTEL_E1000_ETHERNET_DEVICE(0x107F),
  94         INTEL_E1000_ETHERNET_DEVICE(0x108A),
  95         INTEL_E1000_ETHERNET_DEVICE(0x108B),
  96         INTEL_E1000_ETHERNET_DEVICE(0x108C),
  97         INTEL_E1000_ETHERNET_DEVICE(0x1096),
  98         INTEL_E1000_ETHERNET_DEVICE(0x1098),
  99         INTEL_E1000_ETHERNET_DEVICE(0x1099),
 100         INTEL_E1000_ETHERNET_DEVICE(0x109A),
 101         INTEL_E1000_ETHERNET_DEVICE(0x10A4),
 102         INTEL_E1000_ETHERNET_DEVICE(0x10B5),
 103         INTEL_E1000_ETHERNET_DEVICE(0x10B9),
 104         INTEL_E1000_ETHERNET_DEVICE(0x10BA),
 105         INTEL_E1000_ETHERNET_DEVICE(0x10BB),
 106         INTEL_E1000_ETHERNET_DEVICE(0x10BC),
 107         INTEL_E1000_ETHERNET_DEVICE(0x10C4),
 108         INTEL_E1000_ETHERNET_DEVICE(0x10C5),
 109         /* required last entry */
 110         {0,}
 111 };
 112
 113 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 114
 115 int e1000_up(struct e1000_adapter *adapter);
 116 void e1000_down(struct e1000_adapter *adapter);
 117 void e1000_reinit_locked(struct e1000_adapter *adapter);
 118 void e1000_reset(struct e1000_adapter *adapter);
 119 int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
 120 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 121 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 122 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 123 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
 124 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
 125                              struct e1000_tx_ring *txdr);
 126 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 127                              struct e1000_rx_ring *rxdr);
 128 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
 129                              struct e1000_tx_ring *tx_ring);
 130 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
 131                              struct e1000_rx_ring *rx_ring);
 132 void e1000_update_stats(struct e1000_adapter *adapter);
 133
 134 static int e1000_init_module(void);
 135 static void e1000_exit_module(void);
 136 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 137 static void __devexit e1000_remove(struct pci_dev *pdev);
 138 static int e1000_alloc_queues(struct e1000_adapter *adapter);
 139 static int e1000_sw_init(struct e1000_adapter *adapter);
 140 static int e1000_open(struct net_device *netdev);
 141 static int e1000_close(struct net_device *netdev);
 142 static void e1000_configure_tx(struct e1000_adapter *adapter);
 143 static void e1000_configure_rx(struct e1000_adapter *adapter);
 144 static void e1000_setup_rctl(struct e1000_adapter *adapter);
 145 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
 146 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
 147 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
 148                                 struct e1000_tx_ring *tx_ring);
 149 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 150                                 struct e1000_rx_ring *rx_ring);
 151 static void e1000_set_multi(struct net_device *netdev);
 152 static void e1000_update_phy_info(unsigned long data);
 153 static void e1000_watchdog(unsigned long data);
 154 static void e1000_82547_tx_fifo_stall(unsigned long data);
 155 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 156 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
 157 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 158 static int e1000_set_mac(struct net_device *netdev, void *p);
 159 static irqreturn_t e1000_intr(int irq, void *data);
 160 static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
 161                                     struct e1000_tx_ring *tx_ring);
 162 #ifdef CONFIG_E1000_NAPI
 163 static int e1000_clean(struct net_device *poll_dev, int *budget);
 164 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 165                                     struct e1000_rx_ring *rx_ring,
 166                                     int *work_done, int work_to_do);
 167 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 168                                        struct e1000_rx_ring *rx_ring,
 169                                        int *work_done, int work_to_do);
 170 #else
 171 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 172                                     struct e1000_rx_ring *rx_ring);
 173 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 174                                        struct e1000_rx_ring *rx_ring);
 175 #endif
 176 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 177                                    struct e1000_rx_ring *rx_ring,
 178                                    int cleaned_count);
 179 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 180                                       struct e1000_rx_ring *rx_ring,
 181                                       int cleaned_count);
 182 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
 183 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 184                            int cmd);
 185 void e1000_set_ethtool_ops(struct net_device *netdev);
 186 static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
 187 static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
 188 static void e1000_tx_timeout(struct net_device *dev);
 189 static void e1000_reset_task(struct net_device *dev);
 190 static void e1000_smartspeed(struct e1000_adapter *adapter);
 191 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
 192                                        struct sk_buff *skb);
 193
 194 static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
 195 static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 196 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 197 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 198
 199 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 200 #ifdef CONFIG_PM
 201 static int e1000_resume(struct pci_dev *pdev);
 202 #endif
 203 static void e1000_shutdown(struct pci_dev *pdev);
 204
 205 #ifdef CONFIG_NET_POLL_CONTROLLER
 206 /* for netdump / net console */
 207 static void e1000_netpoll (struct net_device *netdev);
 208 #endif
 209
 210 extern void e1000_check_options(struct e1000_adapter *adapter);
 211
 212 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 213                      pci_channel_state_t state);
 214 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
 215 static void e1000_io_resume(struct pci_dev *pdev);
 216
 217 static struct pci_error_handlers e1000_err_handler = {
 218         .error_detected = e1000_io_error_detected,
 219         .slot_reset = e1000_io_slot_reset,
 220         .resume = e1000_io_resume,
 221 };
 222
 223 static struct pci_driver e1000_driver = {
 224         .name     = e1000_driver_name,
 225         .id_table = e1000_pci_tbl,
 226         .probe    = e1000_probe,
 227         .remove   = __devexit_p(e1000_remove),
 228 #ifdef CONFIG_PM
 229         /* Power Managment Hooks */
 230         .suspend  = e1000_suspend,
 231         .resume   = e1000_resume,
 232 #endif
 233         .shutdown = e1000_shutdown,
 234         .err_handler = &e1000_err_handler
 235 };
 236
 237 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
 238 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
 239 MODULE_LICENSE("GPL");
 240 MODULE_VERSION(DRV_VERSION);
 241
 242 static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
 243 module_param(debug, int, 0);
 244 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 245
 246 /**
 247  * e1000_init_module - Driver Registration Routine
 248  *
 249  * e1000_init_module is the first routine called when the driver is
 250  * loaded. All it does is register with the PCI subsystem.
 251  **/
 252
 253 static int __init
 254 e1000_init_module(void)
 255 {
 256         int ret;
 257         printk(KERN_INFO "%s - version %s\n",
 258                e1000_driver_string, e1000_driver_version);
 259
 260         printk(KERN_INFO "%s\n", e1000_copyright);
 261
 262         ret = pci_register_driver(&e1000_driver);
 263
 264         return ret;
 265 }
 266
 267 module_init(e1000_init_module);
 268
 269 /**
 270  * e1000_exit_module - Driver Exit Cleanup Routine
 271  *
 272  * e1000_exit_module is called just before the driver is removed
 273  * from memory.
 274  **/
 275
 276 static void __exit
 277 e1000_exit_module(void)
 278 {
 279         pci_unregister_driver(&e1000_driver);
 280 }
 281
 282 module_exit(e1000_exit_module);
 283
 284 static int e1000_request_irq(struct e1000_adapter *adapter)
 285 {
 286         struct net_device *netdev = adapter->netdev;
 287         int flags, err = 0;
 288
 289         flags = IRQF_SHARED;
 290 #ifdef CONFIG_PCI_MSI
 291         if (adapter->hw.mac_type > e1000_82547_rev_2) {
 292                 adapter->have_msi = TRUE;
 293                 if ((err = pci_enable_msi(adapter->pdev))) {
 294                         DPRINTK(PROBE, ERR,
 295                          "Unable to allocate MSI interrupt Error: %d\n", err);
 296                         adapter->have_msi = FALSE;
 297                 }
 298         }
 299         if (adapter->have_msi)
 300                 flags &= ~IRQF_SHARED;
 301 #endif
 302         if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
 303                                netdev->name, netdev)))
 304                 DPRINTK(PROBE, ERR,
 305                         "Unable to allocate interrupt Error: %d\n", err);
 306
 307         return err;
 308 }
 309
 310 static void e1000_free_irq(struct e1000_adapter *adapter)
 311 {
 312         struct net_device *netdev = adapter->netdev;
 313
 314         free_irq(adapter->pdev->irq, netdev);
 315
 316 #ifdef CONFIG_PCI_MSI
 317         if (adapter->have_msi)
 318                 pci_disable_msi(adapter->pdev);
 319 #endif
 320 }
 321
 322 /**
 323  * e1000_irq_disable - Mask off interrupt generation on the NIC
 324  * @adapter: board private structure
 325  **/
 326
 327 static void
 328 e1000_irq_disable(struct e1000_adapter *adapter)
 329 {
 330         atomic_inc(&adapter->irq_sem);
 331         E1000_WRITE_REG(&adapter->hw, IMC, ~0);
 332         E1000_WRITE_FLUSH(&adapter->hw);
 333         synchronize_irq(adapter->pdev->irq);
 334 }
 335
 336 /**
 337  * e1000_irq_enable - Enable default interrupt generation settings
 338  * @adapter: board private structure
 339  **/
 340
 341 static void
 342 e1000_irq_enable(struct e1000_adapter *adapter)
 343 {
 344         if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
 345                 E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
 346                 E1000_WRITE_FLUSH(&adapter->hw);
 347         }
 348 }
 349
 350 static void
 351 e1000_update_mng_vlan(struct e1000_adapter *adapter)
 352 {
 353         struct net_device *netdev = adapter->netdev;
 354         uint16_t vid = adapter->hw.mng_cookie.vlan_id;
 355         uint16_t old_vid = adapter->mng_vlan_id;
 356         if (adapter->vlgrp) {
 357                 if (!adapter->vlgrp->vlan_devices[vid]) {
 358                         if (adapter->hw.mng_cookie.status &
 359                                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
 360                                 e1000_vlan_rx_add_vid(netdev, vid);
 361                                 adapter->mng_vlan_id = vid;
 362                         } else
 363                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 364
 365                         if ((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
 366                                         (vid != old_vid) &&
 367                                         !adapter->vlgrp->vlan_devices[old_vid])
 368                                 e1000_vlan_rx_kill_vid(netdev, old_vid);
 369                 } else
 370                         adapter->mng_vlan_id = vid;
 371         }
 372 }
 373
 374 /**
 375  * e1000_release_hw_control - release control of the h/w to f/w
 376  * @adapter: address of board private structure
 377  *
 378  * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
 379  * For ASF and Pass Through versions of f/w this means that the
 380  * driver is no longer loaded. For AMT version (only with 82573) i
 381  * of the f/w this means that the network i/f is closed.
 382  *
 383  **/
 384
 385 static void
 386 e1000_release_hw_control(struct e1000_adapter *adapter)
 387 {
 388         uint32_t ctrl_ext;
 389         uint32_t swsm;
 390         uint32_t extcnf;
 391
 392         /* Let firmware taken over control of h/w */
 393         switch (adapter->hw.mac_type) {
 394         case e1000_82571:
 395         case e1000_82572:
 396         case e1000_80003es2lan:
 397                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 398                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 399                                 ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
 400                 break;
 401         case e1000_82573:
 402                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 403                 E1000_WRITE_REG(&adapter->hw, SWSM,
 404                                 swsm & ~E1000_SWSM_DRV_LOAD);
 405         case e1000_ich8lan:
 406                 extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 407                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 408                                 extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
 409                 break;
 410         default:
 411                 break;
 412         }
 413 }
 414
 415 /**
 416  * e1000_get_hw_control - get control of the h/w from f/w
 417  * @adapter: address of board private structure
 418  *
 419  * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
 420  * For ASF and Pass Through versions of f/w this means that
 421  * the driver is loaded. For AMT version (only with 82573)
 422  * of the f/w this means that the network i/f is open.
 423  *
 424  **/
 425
 426 static void
 427 e1000_get_hw_control(struct e1000_adapter *adapter)
 428 {
 429         uint32_t ctrl_ext;
 430         uint32_t swsm;
 431         uint32_t extcnf;
 432
 433         /* Let firmware know the driver has taken over */
 434         switch (adapter->hw.mac_type) {
 435         case e1000_82571:
 436         case e1000_82572:
 437         case e1000_80003es2lan:
 438                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 439                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 440                                 ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 441                 break;
 442         case e1000_82573:
 443                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 444                 E1000_WRITE_REG(&adapter->hw, SWSM,
 445                                 swsm | E1000_SWSM_DRV_LOAD);
 446                 break;
 447         case e1000_ich8lan:
 448                 extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
 449                 E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
 450                                 extcnf | E1000_EXTCNF_CTRL_SWFLAG);
 451                 break;
 452         default:
 453                 break;
 454         }
 455 }
 456
 457 int
 458 e1000_up(struct e1000_adapter *adapter)
 459 {
 460         struct net_device *netdev = adapter->netdev;
 461         int i;
 462
 463         /* hardware has been reset, we need to reload some things */
 464
 465         e1000_set_multi(netdev);
 466
 467         e1000_restore_vlan(adapter);
 468
 469         e1000_configure_tx(adapter);
 470         e1000_setup_rctl(adapter);
 471         e1000_configure_rx(adapter);
 472         /* call E1000_DESC_UNUSED which always leaves
 473          * at least 1 descriptor unused to make sure
 474          * next_to_use != next_to_clean */
 475         for (i = 0; i < adapter->num_rx_queues; i++) {
 476                 struct e1000_rx_ring *ring = &adapter->rx_ring[i];
 477                 adapter->alloc_rx_buf(adapter, ring,
 478                                       E1000_DESC_UNUSED(ring));
 479         }
 480
 481         adapter->tx_queue_len = netdev->tx_queue_len;
 482
 483 #ifdef CONFIG_E1000_NAPI
 484         netif_poll_enable(netdev);
 485 #endif
 486         e1000_irq_enable(adapter);
 487
 488         clear_bit(__E1000_DOWN, &adapter->flags);
 489
 490         mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
 491         return 0;
 492 }
 493
 494 /**
 495  * e1000_power_up_phy - restore link in case the phy was powered down
 496  * @adapter: address of board private structure
 497  *
 498  * The phy may be powered down to save power and turn off link when the
 499  * driver is unloaded and wake on lan is not enabled (among others)
 500  * *** this routine MUST be followed by a call to e1000_reset ***
 501  *
 502  **/
 503
 504 void e1000_power_up_phy(struct e1000_adapter *adapter)
 505 {
 506         uint16_t mii_reg = 0;
 507
 508         /* Just clear the power down bit to wake the phy back up */
 509         if (adapter->hw.media_type == e1000_media_type_copper) {
 510                 /* according to the manual, the phy will retain its
 511                  * settings across a power-down/up cycle */
 512                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 513                 mii_reg &= ~MII_CR_POWER_DOWN;
 514                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 515         }
 516 }
 517
 518 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 519 {
 520         /* Power down the PHY so no link is implied when interface is down *
 521          * The PHY cannot be powered down if any of the following is TRUE *
 522          * (a) WoL is enabled
 523          * (b) AMT is active
 524          * (c) SoL/IDER session is active */
 525         if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
 526            adapter->hw.media_type == e1000_media_type_copper) {
 527                 uint16_t mii_reg = 0;
 528
 529                 switch (adapter->hw.mac_type) {
 530                 case e1000_82540:
 531                 case e1000_82545:
 532                 case e1000_82545_rev_3:
 533                 case e1000_82546:
 534                 case e1000_82546_rev_3:
 535                 case e1000_82541:
 536                 case e1000_82541_rev_2:
 537                 case e1000_82547:
 538                 case e1000_82547_rev_2:
 539                         if (E1000_READ_REG(&adapter->hw, MANC) &
 540                             E1000_MANC_SMBUS_EN)
 541                                 goto out;
 542                         break;
 543                 case e1000_82571:
 544                 case e1000_82572:
 545                 case e1000_82573:
 546                 case e1000_80003es2lan:
 547                 case e1000_ich8lan:
 548                         if (e1000_check_mng_mode(&adapter->hw) ||
 549                             e1000_check_phy_reset_block(&adapter->hw))
 550                                 goto out;
 551                         break;
 552                 default:
 553                         goto out;
 554                 }
 555                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 556                 mii_reg |= MII_CR_POWER_DOWN;
 557                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 558                 mdelay(1);
 559         }
 560 out:
 561         return;
 562 }
 563
 564 void
 565 e1000_down(struct e1000_adapter *adapter)
 566 {
 567         struct net_device *netdev = adapter->netdev;
 568
 569         /* signal that we're down so the interrupt handler does not
 570          * reschedule our watchdog timer */
 571         set_bit(__E1000_DOWN, &adapter->flags);
 572
 573         e1000_irq_disable(adapter);
 574
 575         del_timer_sync(&adapter->tx_fifo_stall_timer);
 576         del_timer_sync(&adapter->watchdog_timer);
 577         del_timer_sync(&adapter->phy_info_timer);
 578
 579 #ifdef CONFIG_E1000_NAPI
 580         netif_poll_disable(netdev);
 581 #endif
 582         netdev->tx_queue_len = adapter->tx_queue_len;
 583         adapter->link_speed = 0;
 584         adapter->link_duplex = 0;
 585         netif_carrier_off(netdev);
 586         netif_stop_queue(netdev);
 587
 588         e1000_reset(adapter);
 589         e1000_clean_all_tx_rings(adapter);
 590         e1000_clean_all_rx_rings(adapter);
 591 }
 592
 593 void
 594 e1000_reinit_locked(struct e1000_adapter *adapter)
 595 {
 596         WARN_ON(in_interrupt());
 597         while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 598                 msleep(1);
 599         e1000_down(adapter);
 600         e1000_up(adapter);
 601         clear_bit(__E1000_RESETTING, &adapter->flags);
 602 }
 603
 604 void
 605 e1000_reset(struct e1000_adapter *adapter)
 606 {
 607         uint32_t pba, manc;
 608         uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
 609
 610         /* Repartition Pba for greater than 9k mtu
 611          * To take effect CTRL.RST is required.
 612          */
 613
 614         switch (adapter->hw.mac_type) {
 615         case e1000_82547:
 616         case e1000_82547_rev_2:
 617                 pba = E1000_PBA_30K;
 618                 break;
 619         case e1000_82571:
 620         case e1000_82572:
 621         case e1000_80003es2lan:
 622                 pba = E1000_PBA_38K;
 623                 break;
 624         case e1000_82573:
 625                 pba = E1000_PBA_12K;
 626                 break;
 627         case e1000_ich8lan:
 628                 pba = E1000_PBA_8K;
 629                 break;
 630         default:
 631                 pba = E1000_PBA_48K;
 632                 break;
 633         }
 634
 635         if ((adapter->hw.mac_type != e1000_82573) &&
 636            (adapter->netdev->mtu > E1000_RXBUFFER_8192))
 637                 pba -= 8; /* allocate more FIFO for Tx */
 638
 639
 640         if (adapter->hw.mac_type == e1000_82547) {
 641                 adapter->tx_fifo_head = 0;
 642                 adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
 643                 adapter->tx_fifo_size =
 644                         (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
 645                 atomic_set(&adapter->tx_fifo_stall, 0);
 646         }
 647
 648         E1000_WRITE_REG(&adapter->hw, PBA, pba);
 649
 650         /* flow control settings */
 651         /* Set the FC high water mark to 90% of the FIFO size.
 652          * Required to clear last 3 LSB */
 653         fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
 654         /* We can't use 90% on small FIFOs because the remainder
 655          * would be less than 1 full frame.  In this case, we size
 656          * it to allow at least a full frame above the high water
 657          *  mark. */
 658         if (pba < E1000_PBA_16K)
 659                 fc_high_water_mark = (pba * 1024) - 1600;
 660
 661         adapter->hw.fc_high_water = fc_high_water_mark;
 662         adapter->hw.fc_low_water = fc_high_water_mark - 8;
 663         if (adapter->hw.mac_type == e1000_80003es2lan)
 664                 adapter->hw.fc_pause_time = 0xFFFF;
 665         else
 666                 adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
 667         adapter->hw.fc_send_xon = 1;
 668         adapter->hw.fc = adapter->hw.original_fc;
 669
 670         /* Allow time for pending master requests to run */
 671         e1000_reset_hw(&adapter->hw);
 672         if (adapter->hw.mac_type >= e1000_82544)
 673                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
 674
 675         if (e1000_init_hw(&adapter->hw))
 676                 DPRINTK(PROBE, ERR, "Hardware Error\n");
 677         e1000_update_mng_vlan(adapter);
 678         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
 679         E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
 680
 681         e1000_reset_adaptive(&adapter->hw);
 682         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
 683
 684         if (!adapter->smart_power_down &&
 685             (adapter->hw.mac_type == e1000_82571 ||
 686              adapter->hw.mac_type == e1000_82572)) {
 687                 uint16_t phy_data = 0;
 688                 /* speed up time to link by disabling smart power down, ignore
 689                  * the return value of this function because there is nothing
 690                  * different we would do if it failed */
 691                 e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
 692                                    &phy_data);
 693                 phy_data &= ~IGP02E1000_PM_SPD;
 694                 e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
 695                                     phy_data);
 696         }
 697
 698         if ((adapter->en_mng_pt) &&
 699             (adapter->hw.mac_type >= e1000_82540) &&
 700             (adapter->hw.mac_type < e1000_82571) &&
 701             (adapter->hw.media_type == e1000_media_type_copper)) {
 702                 manc = E1000_READ_REG(&adapter->hw, MANC);
 703                 manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
 704                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
 705         }
 706 }
 707
 708 /**
 709  * e1000_probe - Device Initialization Routine
 710  * @pdev: PCI device information struct
 711  * @ent: entry in e1000_pci_tbl
 712  *
 713  * Returns 0 on success, negative on failure
 714  *
 715  * e1000_probe initializes an adapter identified by a pci_dev structure.
 716  * The OS initialization, configuring of the adapter private structure,
 717  * and a hardware reset occur.
 718  **/
 719
 720 static int __devinit
 721 e1000_probe(struct pci_dev *pdev,
 722             const struct pci_device_id *ent)
 723 {
 724         struct net_device *netdev;
 725         struct e1000_adapter *adapter;
 726         unsigned long mmio_start, mmio_len;
 727         unsigned long flash_start, flash_len;
 728
 729         static int cards_found = 0;
 730         static int global_quad_port_a = 0; /* global ksp3 port a indication */
 731         int i, err, pci_using_dac;
 732         uint16_t eeprom_data = 0;
 733         uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
 734         if ((err = pci_enable_device(pdev)))
 735                 return err;
 736
 737         if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
 738             !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
 739                 pci_using_dac = 1;
 740         } else {
 741                 if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
 742                     (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
 743                         E1000_ERR("No usable DMA configuration, aborting\n");
 744                         goto err_dma;
 745                 }
 746                 pci_using_dac = 0;
 747         }
 748
 749         if ((err = pci_request_regions(pdev, e1000_driver_name)))
 750                 goto err_pci_reg;
 751
 752         pci_set_master(pdev);
 753
 754         err = -ENOMEM;
 755         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
 756         if (!netdev)
 757                 goto err_alloc_etherdev;
 758
 759         SET_MODULE_OWNER(netdev);
 760         SET_NETDEV_DEV(netdev, &pdev->dev);
 761
 762         pci_set_drvdata(pdev, netdev);
 763         adapter = netdev_priv(netdev);
 764         adapter->netdev = netdev;
 765         adapter->pdev = pdev;
 766         adapter->hw.back = adapter;
 767         adapter->msg_enable = (1 << debug) - 1;
 768
 769         mmio_start = pci_resource_start(pdev, BAR_0);
 770         mmio_len = pci_resource_len(pdev, BAR_0);
 771
 772         err = -EIO;
 773         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
 774         if (!adapter->hw.hw_addr)
 775                 goto err_ioremap;
 776
 777         for (i = BAR_1; i <= BAR_5; i++) {
 778                 if (pci_resource_len(pdev, i) == 0)
 779                         continue;
 780                 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
 781                         adapter->hw.io_base = pci_resource_start(pdev, i);
 782                         break;
 783                 }
 784         }
 785
 786         netdev->open = &e1000_open;
 787         netdev->stop = &e1000_close;
 788         netdev->hard_start_xmit = &e1000_xmit_frame;
 789         netdev->get_stats = &e1000_get_stats;
 790         netdev->set_multicast_list = &e1000_set_multi;
 791         netdev->set_mac_address = &e1000_set_mac;
 792         netdev->change_mtu = &e1000_change_mtu;
 793         netdev->do_ioctl = &e1000_ioctl;
 794         e1000_set_ethtool_ops(netdev);
 795         netdev->tx_timeout = &e1000_tx_timeout;
 796         netdev->watchdog_timeo = 5 * HZ;
 797 #ifdef CONFIG_E1000_NAPI
 798         netdev->poll = &e1000_clean;
 799         netdev->weight = 64;
 800 #endif
 801         netdev->vlan_rx_register = e1000_vlan_rx_register;
 802         netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
 803         netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
 804 #ifdef CONFIG_NET_POLL_CONTROLLER
 805         netdev->poll_controller = e1000_netpoll;
 806 #endif
 807         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 808
 809         netdev->mem_start = mmio_start;
 810         netdev->mem_end = mmio_start + mmio_len;
 811         netdev->base_addr = adapter->hw.io_base;
 812
 813         adapter->bd_number = cards_found;
 814
 815         /* setup the private structure */
 816
 817         if ((err = e1000_sw_init(adapter)))
 818                 goto err_sw_init;
 819
 820         err = -EIO;
 821         /* Flash BAR mapping must happen after e1000_sw_init
 822          * because it depends on mac_type */
 823         if ((adapter->hw.mac_type == e1000_ich8lan) &&
 824            (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
 825                 flash_start = pci_resource_start(pdev, 1);
 826                 flash_len = pci_resource_len(pdev, 1);
 827                 adapter->hw.flash_address = ioremap(flash_start, flash_len);
 828                 if (!adapter->hw.flash_address)
 829                         goto err_flashmap;
 830         }
 831
 832         if (e1000_check_phy_reset_block(&adapter->hw))
 833                 DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 834
 835         if (adapter->hw.mac_type >= e1000_82543) {
 836                 netdev->features = NETIF_F_SG |
 837                                    NETIF_F_HW_CSUM |
 838                                    NETIF_F_HW_VLAN_TX |
 839                                    NETIF_F_HW_VLAN_RX |
 840                                    NETIF_F_HW_VLAN_FILTER;
 841                 if (adapter->hw.mac_type == e1000_ich8lan)
 842                         netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
 843         }
 844
 845 #ifdef NETIF_F_TSO
 846         if ((adapter->hw.mac_type >= e1000_82544) &&
 847            (adapter->hw.mac_type != e1000_82547))
 848                 netdev->features |= NETIF_F_TSO;
 849
 850 #ifdef NETIF_F_TSO6
 851         if (adapter->hw.mac_type > e1000_82547_rev_2)
 852                 netdev->features |= NETIF_F_TSO6;
 853 #endif
 854 #endif
 855         if (pci_using_dac)
 856                 netdev->features |= NETIF_F_HIGHDMA;
 857
 858         netdev->features |= NETIF_F_LLTX;
 859
 860         adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
 861
 862         /* initialize eeprom parameters */
 863
 864         if (e1000_init_eeprom_params(&adapter->hw)) {
 865                 E1000_ERR("EEPROM initialization failed\n");
 866                 goto err_eeprom;
 867         }
 868
 869         /* before reading the EEPROM, reset the controller to
 870          * put the device in a known good starting state */
 871
 872         e1000_reset_hw(&adapter->hw);
 873
 874         /* make sure the EEPROM is good */
 875
 876         if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
 877                 DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
 878                 goto err_eeprom;
 879         }
 880
 881         /* copy the MAC address out of the EEPROM */
 882
 883         if (e1000_read_mac_addr(&adapter->hw))
 884                 DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
 885         memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
 886         memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
 887
 888         if (!is_valid_ether_addr(netdev->perm_addr)) {
 889                 DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
 890                 goto err_eeprom;
 891         }
 892
 893         e1000_get_bus_info(&adapter->hw);
 894
 895         init_timer(&adapter->tx_fifo_stall_timer);
 896         adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
 897         adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
 898
 899         init_timer(&adapter->watchdog_timer);
 900         adapter->watchdog_timer.function = &e1000_watchdog;
 901         adapter->watchdog_timer.data = (unsigned long) adapter;
 902
 903         init_timer(&adapter->phy_info_timer);
 904         adapter->phy_info_timer.function = &e1000_update_phy_info;
 905         adapter->phy_info_timer.data = (unsigned long) adapter;
 906
 907         INIT_WORK(&adapter->reset_task,
 908                 (void (*)(void *))e1000_reset_task, netdev);
 909
 910         e1000_check_options(adapter);
 911
 912         /* Initial Wake on LAN setting
 913          * If APM wake is enabled in the EEPROM,
 914          * enable the ACPI Magic Packet filter
 915          */
 916
 917         switch (adapter->hw.mac_type) {
 918         case e1000_82542_rev2_0:
 919         case e1000_82542_rev2_1:
 920         case e1000_82543:
 921                 break;
 922         case e1000_82544:
 923                 e1000_read_eeprom(&adapter->hw,
 924                         EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 925                 eeprom_apme_mask = E1000_EEPROM_82544_APM;
 926                 break;
 927         case e1000_ich8lan:
 928                 e1000_read_eeprom(&adapter->hw,
 929                         EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
 930                 eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
 931                 break;
 932         case e1000_82546:
 933         case e1000_82546_rev_3:
 934         case e1000_82571:
 935         case e1000_80003es2lan:
 936                 if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
 937                         e1000_read_eeprom(&adapter->hw,
 938                                 EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
 939                         break;
 940                 }
 941                 /* Fall Through */
 942         default:
 943                 e1000_read_eeprom(&adapter->hw,
 944                         EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
 945                 break;
 946         }
 947         if (eeprom_data & eeprom_apme_mask)
 948                 adapter->eeprom_wol |= E1000_WUFC_MAG;
 949
 950         /* now that we have the eeprom settings, apply the special cases
 951          * where the eeprom may be wrong or the board simply won't support
 952          * wake on lan on a particular port */
 953         switch (pdev->device) {
 954         case E1000_DEV_ID_82546GB_PCIE:
 955                 adapter->eeprom_wol = 0;
 956                 break;
 957         case E1000_DEV_ID_82546EB_FIBER:
 958         case E1000_DEV_ID_82546GB_FIBER:
 959         case E1000_DEV_ID_82571EB_FIBER:
 960                 /* Wake events only supported on port A for dual fiber
 961                  * regardless of eeprom setting */
 962                 if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
 963                         adapter->eeprom_wol = 0;
 964                 break;
 965         case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 966         case E1000_DEV_ID_82571EB_QUAD_COPPER:
 967         case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
 968                 /* if quad port adapter, disable WoL on all but port A */
 969                 if (global_quad_port_a != 0)
 970                         adapter->eeprom_wol = 0;
 971                 else
 972                         adapter->quad_port_a = 1;
 973                 /* Reset for multiple quad port adapters */
 974                 if (++global_quad_port_a == 4)
 975                         global_quad_port_a = 0;
 976                 break;
 977         }
 978
 979         /* initialize the wol settings based on the eeprom settings */
 980         adapter->wol = adapter->eeprom_wol;
 981
 982         /* print bus type/speed/width info */
 983         {
 984         struct e1000_hw *hw = &adapter->hw;
 985         DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
 986                 ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
 987                  (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
 988                 ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
 989                  (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
 990                  (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
 991                  (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
 992                  (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
 993                 ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
 994                  (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
 995                  (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
 996                  "32-bit"));
 997         }
 998
 999         for (i = 0; i < 6; i++)
1000                 printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':');
1001
1002         /* reset the hardware with the new settings */
1003         e1000_reset(adapter);
1004
1005         /* If the controller is 82573 and f/w is AMT, do not set
1006          * DRV_LOAD until the interface is up.  For all other cases,
1007          * let the f/w know that the h/w is now under the control
1008          * of the driver. */
1009         if (adapter->hw.mac_type != e1000_82573 ||
1010             !e1000_check_mng_mode(&adapter->hw))
1011                 e1000_get_hw_control(adapter);
1012
1013         strcpy(netdev->name, "eth%d");
1014         if ((err = register_netdev(netdev)))
1015                 goto err_register;
1016
1017         /* tell the stack to leave us alone until e1000_open() is called */
1018         netif_carrier_off(netdev);
1019         netif_stop_queue(netdev);
1020
1021         DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
1022
1023         cards_found++;
1024         return 0;
1025
1026 err_register:
1027         e1000_release_hw_control(adapter);
1028 err_eeprom:
1029         if (!e1000_check_phy_reset_block(&adapter->hw))
1030                 e1000_phy_hw_reset(&adapter->hw);
1031
1032         if (adapter->hw.flash_address)
1033                 iounmap(adapter->hw.flash_address);
1034 err_flashmap:
1035 #ifdef CONFIG_E1000_NAPI
1036         for (i = 0; i < adapter->num_rx_queues; i++)
1037                 dev_put(&adapter->polling_netdev[i]);
1038 #endif
1039
1040         kfree(adapter->tx_ring);
1041         kfree(adapter->rx_ring);
1042 #ifdef CONFIG_E1000_NAPI
1043         kfree(adapter->polling_netdev);
1044 #endif
1045 err_sw_init:
1046         iounmap(adapter->hw.hw_addr);
1047 err_ioremap:
1048         free_netdev(netdev);
1049 err_alloc_etherdev:
1050         pci_release_regions(pdev);
1051 err_pci_reg:
1052 err_dma:
1053         pci_disable_device(pdev);
1054         return err;
1055 }
1056
1057 /**
1058  * e1000_remove - Device Removal Routine
1059  * @pdev: PCI device information struct
1060  *
1061  * e1000_remove is called by the PCI subsystem to alert the driver
1062  * that it should release a PCI device.  The could be caused by a
1063  * Hot-Plug event, or because the driver is going to be removed from
1064  * memory.
1065  **/
1066
1067 static void __devexit
1068 e1000_remove(struct pci_dev *pdev)
1069 {
1070         struct net_device *netdev = pci_get_drvdata(pdev);
1071         struct e1000_adapter *adapter = netdev_priv(netdev);
1072         uint32_t manc;
1073 #ifdef CONFIG_E1000_NAPI
1074         int i;
1075 #endif
1076
1077         flush_scheduled_work();
1078
1079         if (adapter->hw.mac_type >= e1000_82540 &&
1080             adapter->hw.mac_type < e1000_82571 &&
1081             adapter->hw.media_type == e1000_media_type_copper) {
1082                 manc = E1000_READ_REG(&adapter->hw, MANC);
1083                 if (manc & E1000_MANC_SMBUS_EN) {
1084                         manc |= E1000_MANC_ARP_EN;
1085                         E1000_WRITE_REG(&adapter->hw, MANC, manc);
1086                 }
1087         }
1088
1089         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
1090          * would have already happened in close and is redundant. */
1091         e1000_release_hw_control(adapter);
1092
1093         unregister_netdev(netdev);
1094 #ifdef CONFIG_E1000_NAPI
1095         for (i = 0; i < adapter->num_rx_queues; i++)
1096                 dev_put(&adapter->polling_netdev[i]);
1097 #endif
1098
1099         if (!e1000_check_phy_reset_block(&adapter->hw))
1100                 e1000_phy_hw_reset(&adapter->hw);
1101
1102         kfree(adapter->tx_ring);
1103         kfree(adapter->rx_ring);
1104 #ifdef CONFIG_E1000_NAPI
1105         kfree(adapter->polling_netdev);
1106 #endif
1107
1108         iounmap(adapter->hw.hw_addr);
1109         if (adapter->hw.flash_address)
1110                 iounmap(adapter->hw.flash_address);
1111         pci_release_regions(pdev);
1112
1113         free_netdev(netdev);
1114
1115         pci_disable_device(pdev);
1116 }
1117
1118 /**
1119  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1120  * @adapter: board private structure to initialize
1121  *
1122  * e1000_sw_init initializes the Adapter private data structure.
1123  * Fields are initialized based on PCI device information and
1124  * OS network device settings (MTU size).
1125  **/
1126
1127 static int __devinit
1128 e1000_sw_init(struct e1000_adapter *adapter)
1129 {
1130         struct e1000_hw *hw = &adapter->hw;
1131         struct net_device *netdev = adapter->netdev;
1132         struct pci_dev *pdev = adapter->pdev;
1133 #ifdef CONFIG_E1000_NAPI
1134         int i;
1135 #endif
1136
1137         /* PCI config space info */
1138
1139         hw->vendor_id = pdev->vendor;
1140         hw->device_id = pdev->device;
1141         hw->subsystem_vendor_id = pdev->subsystem_vendor;
1142         hw->subsystem_id = pdev->subsystem_device;
1143
1144         pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
1145
1146         pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
1147
1148         adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
1149         adapter->rx_ps_bsize0 = E1000_RXBUFFER_128;
1150         hw->max_frame_size = netdev->mtu +
1151                              ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
1152         hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
1153
1154         /* identify the MAC */
1155
1156         if (e1000_set_mac_type(hw)) {
1157                 DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
1158                 return -EIO;
1159         }
1160
1161         switch (hw->mac_type) {
1162         default:
1163                 break;
1164         case e1000_82541:
1165         case e1000_82547:
1166         case e1000_82541_rev_2:
1167         case e1000_82547_rev_2:
1168                 hw->phy_init_script = 1;
1169                 break;
1170         }
1171
1172         e1000_set_media_type(hw);
1173
1174         hw->wait_autoneg_complete = FALSE;
1175         hw->tbi_compatibility_en = TRUE;
1176         hw->adaptive_ifs = TRUE;
1177
1178         /* Copper options */
1179
1180         if (hw->media_type == e1000_media_type_copper) {
1181                 hw->mdix = AUTO_ALL_MODES;
1182                 hw->disable_polarity_correction = FALSE;
1183                 hw->master_slave = E1000_MASTER_SLAVE;
1184         }
1185
1186         adapter->num_tx_queues = 1;
1187         adapter->num_rx_queues = 1;
1188
1189         if (e1000_alloc_queues(adapter)) {
1190                 DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
1191                 return -ENOMEM;
1192         }
1193
1194 #ifdef CONFIG_E1000_NAPI
1195         for (i = 0; i < adapter->num_rx_queues; i++) {
1196                 adapter->polling_netdev[i].priv = adapter;
1197                 adapter->polling_netdev[i].poll = &e1000_clean;
1198                 adapter->polling_netdev[i].weight = 64;
1199                 dev_hold(&adapter->polling_netdev[i]);
1200                 set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
1201         }
1202         spin_lock_init(&adapter->tx_queue_lock);
1203 #endif
1204
1205         atomic_set(&adapter->irq_sem, 1);
1206         spin_lock_init(&adapter->stats_lock);
1207
1208         set_bit(__E1000_DOWN, &adapter->flags);
1209
1210         return 0;
1211 }
1212
1213 /**
1214  * e1000_alloc_queues - Allocate memory for all rings
1215  * @adapter: board private structure to initialize
1216  *
1217  * We allocate one ring per queue at run-time since we don't know the
1218  * number of queues at compile-time.  The polling_netdev array is
1219  * intended for Multiqueue, but should work fine with a single queue.
1220  **/
1221
1222 static int __devinit
1223 e1000_alloc_queues(struct e1000_adapter *adapter)
1224 {
1225         int size;
1226
1227         size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
1228         adapter->tx_ring = kmalloc(size, GFP_KERNEL);
1229         if (!adapter->tx_ring)
1230                 return -ENOMEM;
1231         memset(adapter->tx_ring, 0, size);
1232
1233         size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
1234         adapter->rx_ring = kmalloc(size, GFP_KERNEL);
1235         if (!adapter->rx_ring) {
1236                 kfree(adapter->tx_ring);
1237                 return -ENOMEM;
1238         }
1239         memset(adapter->rx_ring, 0, size);
1240
1241 #ifdef CONFIG_E1000_NAPI
1242         size = sizeof(struct net_device) * adapter->num_rx_queues;
1243         adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
1244         if (!adapter->polling_netdev) {
1245                 kfree(adapter->tx_ring);
1246                 kfree(adapter->rx_ring);
1247                 return -ENOMEM;
1248         }
1249         memset(adapter->polling_netdev, 0, size);
1250 #endif
1251
1252         return E1000_SUCCESS;
1253 }
1254
1255 /**
1256  * e1000_open - Called when a network interface is made active
1257  * @netdev: network interface device structure
1258  *
1259  * Returns 0 on success, negative value on failure
1260  *
1261  * The open entry point is called when a network interface is made
1262  * active by the system (IFF_UP).  At this point all resources needed
1263  * for transmit and receive operations are allocated, the interrupt
1264  * handler is registered with the OS, the watchdog timer is started,
1265  * and the stack is notified that the interface is ready.
1266  **/
1267
1268 static int
1269 e1000_open(struct net_device *netdev)
1270 {
1271         struct e1000_adapter *adapter = netdev_priv(netdev);
1272         int err;
1273
1274         /* disallow open during test */
1275         if (test_bit(__E1000_TESTING, &adapter->flags))
1276                 return -EBUSY;
1277
1278         /* allocate transmit descriptors */
1279         if ((err = e1000_setup_all_tx_resources(adapter)))
1280                 goto err_setup_tx;
1281
1282         /* allocate receive descriptors */
1283         if ((err = e1000_setup_all_rx_resources(adapter)))
1284                 goto err_setup_rx;
1285
1286         err = e1000_request_irq(adapter);
1287         if (err)
1288                 goto err_req_irq;
1289
1290         e1000_power_up_phy(adapter);
1291
1292         if ((err = e1000_up(adapter)))
1293                 goto err_up;
1294         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1295         if ((adapter->hw.mng_cookie.status &
1296                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1297                 e1000_update_mng_vlan(adapter);
1298         }
1299
1300         /* If AMT is enabled, let the firmware know that the network
1301          * interface is now open */
1302         if (adapter->hw.mac_type == e1000_82573 &&
1303             e1000_check_mng_mode(&adapter->hw))
1304                 e1000_get_hw_control(adapter);
1305
1306         return E1000_SUCCESS;
1307
1308 err_up:
1309         e1000_power_down_phy(adapter);
1310         e1000_free_irq(adapter);
1311 err_req_irq:
1312         e1000_free_all_rx_resources(adapter);
1313 err_setup_rx:
1314         e1000_free_all_tx_resources(adapter);
1315 err_setup_tx:
1316         e1000_reset(adapter);
1317
1318         return err;
1319 }
1320
1321 /**
1322  * e1000_close - Disables a network interface
1323  * @netdev: network interface device structure
1324  *
1325  * Returns 0, this is not allowed to fail
1326  *
1327  * The close entry point is called when an interface is de-activated
1328  * by the OS.  The hardware is still under the drivers control, but
1329  * needs to be disabled.  A global MAC reset is issued to stop the
1330  * hardware, and all transmit and receive resources are freed.
1331  **/
1332
1333 static int
1334 e1000_close(struct net_device *netdev)
1335 {
1336         struct e1000_adapter *adapter = netdev_priv(netdev);
1337
1338         WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
1339         e1000_down(adapter);
1340         e1000_power_down_phy(adapter);
1341         e1000_free_irq(adapter);
1342
1343         e1000_free_all_tx_resources(adapter);
1344         e1000_free_all_rx_resources(adapter);
1345
1346         /* kill manageability vlan ID if supported, but not if a vlan with
1347          * the same ID is registered on the host OS (let 8021q kill it) */
1348         if ((adapter->hw.mng_cookie.status &
1349                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
1350              !(adapter->vlgrp &&
1351                           adapter->vlgrp->vlan_devices[adapter->mng_vlan_id])) {
1352                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
1353         }
1354
1355         /* If AMT is enabled, let the firmware know that the network
1356          * interface is now closed */
1357         if (adapter->hw.mac_type == e1000_82573 &&
1358             e1000_check_mng_mode(&adapter->hw))
1359                 e1000_release_hw_control(adapter);
1360
1361         return 0;
1362 }
1363
1364 /**
1365  * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1366  * @adapter: address of board private structure
1367  * @start: address of beginning of memory
1368  * @len: length of memory
1369  **/
1370 static boolean_t
1371 e1000_check_64k_bound(struct e1000_adapter *adapter,
1372                       void *start, unsigned long len)
1373 {
1374         unsigned long begin = (unsigned long) start;
1375         unsigned long end = begin + len;
1376
1377         /* First rev 82545 and 82546 need to not allow any memory
1378          * write location to cross 64k boundary due to errata 23 */
1379         if (adapter->hw.mac_type == e1000_82545 ||
1380             adapter->hw.mac_type == e1000_82546) {
1381                 return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
1382         }
1383
1384         return TRUE;
1385 }
1386
1387 /**
1388  * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1389  * @adapter: board private structure
1390  * @txdr:    tx descriptor ring (for a specific queue) to setup
1391  *
1392  * Return 0 on success, negative on failure
1393  **/
1394
1395 static int
1396 e1000_setup_tx_resources(struct e1000_adapter *adapter,
1397                          struct e1000_tx_ring *txdr)
1398 {
1399         struct pci_dev *pdev = adapter->pdev;
1400         int size;
1401
1402         size = sizeof(struct e1000_buffer) * txdr->count;
1403         txdr->buffer_info = vmalloc(size);
1404         if (!txdr->buffer_info) {
1405                 DPRINTK(PROBE, ERR,
1406                 "Unable to allocate memory for the transmit descriptor ring\n");
1407                 return -ENOMEM;
1408         }
1409         memset(txdr->buffer_info, 0, size);
1410
1411         /* round up to nearest 4K */
1412
1413         txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1414         E1000_ROUNDUP(txdr->size, 4096);
1415
1416         txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1417         if (!txdr->desc) {
1418 setup_tx_desc_die:
1419                 vfree(txdr->buffer_info);
1420                 DPRINTK(PROBE, ERR,
1421                 "Unable to allocate memory for the transmit descriptor ring\n");
1422                 return -ENOMEM;
1423         }
1424
1425         /* Fix for errata 23, can't cross 64kB boundary */
1426         if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1427                 void *olddesc = txdr->desc;
1428                 dma_addr_t olddma = txdr->dma;
1429                 DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
1430                                      "at %p\n", txdr->size, txdr->desc);
1431                 /* Try again, without freeing the previous */
1432                 txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1433                 /* Failed allocation, critical failure */
1434                 if (!txdr->desc) {
1435                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1436                         goto setup_tx_desc_die;
1437                 }
1438
1439                 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1440                         /* give up */
1441                         pci_free_consistent(pdev, txdr->size, txdr->desc,
1442                                             txdr->dma);
1443                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1444                         DPRINTK(PROBE, ERR,
1445                                 "Unable to allocate aligned memory "
1446                                 "for the transmit descriptor ring\n");
1447                         vfree(txdr->buffer_info);
1448                         return -ENOMEM;
1449                 } else {
1450                         /* Free old allocation, new allocation was successful */
1451                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1452                 }
1453         }
1454         memset(txdr->desc, 0, txdr->size);
1455
1456         txdr->next_to_use = 0;
1457         txdr->next_to_clean = 0;
1458         spin_lock_init(&txdr->tx_lock);
1459
1460         return 0;
1461 }
1462
1463 /**
1464  * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1465  *                                (Descriptors) for all queues
1466  * @adapter: board private structure
1467  *
1468  * Return 0 on success, negative on failure
1469  **/
1470
1471 int
1472 e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
1473 {
1474         int i, err = 0;
1475
1476         for (i = 0; i < adapter->num_tx_queues; i++) {
1477                 err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
1478                 if (err) {
1479                         DPRINTK(PROBE, ERR,
1480                                 "Allocation for Tx Queue %u failed\n", i);
1481                         for (i-- ; i >= 0; i--)
1482                                 e1000_free_tx_resources(adapter,
1483                                                         &adapter->tx_ring[i]);
1484                         break;
1485                 }
1486         }
1487
1488         return err;
1489 }
1490
1491 /**
1492  * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1493  * @adapter: board private structure
1494  *
1495  * Configure the Tx unit of the MAC after a reset.
1496  **/
1497
1498 static void
1499 e1000_configure_tx(struct e1000_adapter *adapter)
1500 {
1501         uint64_t tdba;
1502         struct e1000_hw *hw = &adapter->hw;
1503         uint32_t tdlen, tctl, tipg, tarc;
1504         uint32_t ipgr1, ipgr2;
1505
1506         /* Setup the HW Tx Head and Tail descriptor pointers */
1507
1508         switch (adapter->num_tx_queues) {
1509         case 1:
1510         default:
1511                 tdba = adapter->tx_ring[0].dma;
1512                 tdlen = adapter->tx_ring[0].count *
1513                         sizeof(struct e1000_tx_desc);
1514                 E1000_WRITE_REG(hw, TDLEN, tdlen);
1515                 E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
1516                 E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
1517                 E1000_WRITE_REG(hw, TDT, 0);
1518                 E1000_WRITE_REG(hw, TDH, 0);
1519                 adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
1520                 adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
1521                 break;
1522         }
1523
1524         /* Set the default values for the Tx Inter Packet Gap timer */
1525
1526         if (hw->media_type == e1000_media_type_fiber ||
1527             hw->media_type == e1000_media_type_internal_serdes)
1528                 tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
1529         else
1530                 tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
1531
1532         switch (hw->mac_type) {
1533         case e1000_82542_rev2_0:
1534         case e1000_82542_rev2_1:
1535                 tipg = DEFAULT_82542_TIPG_IPGT;
1536                 ipgr1 = DEFAULT_82542_TIPG_IPGR1;
1537                 ipgr2 = DEFAULT_82542_TIPG_IPGR2;
1538                 break;
1539         case e1000_80003es2lan:
1540                 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1541                 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
1542                 break;
1543         default:
1544                 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1545                 ipgr2 = DEFAULT_82543_TIPG_IPGR2;
1546                 break;
1547         }
1548         tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
1549         tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
1550         E1000_WRITE_REG(hw, TIPG, tipg);
1551
1552         /* Set the Tx Interrupt Delay register */
1553
1554         E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
1555         if (hw->mac_type >= e1000_82540)
1556                 E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
1557
1558         /* Program the Transmit Control Register */
1559
1560         tctl = E1000_READ_REG(hw, TCTL);
1561         tctl &= ~E1000_TCTL_CT;
1562         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
1563                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1564
1565         if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
1566                 tarc = E1000_READ_REG(hw, TARC0);
1567                 /* set the speed mode bit, we'll clear it if we're not at
1568                  * gigabit link later */
1569                 tarc |= (1 << 21);
1570                 E1000_WRITE_REG(hw, TARC0, tarc);
1571         } else if (hw->mac_type == e1000_80003es2lan) {
1572                 tarc = E1000_READ_REG(hw, TARC0);
1573                 tarc |= 1;
1574                 E1000_WRITE_REG(hw, TARC0, tarc);
1575                 tarc = E1000_READ_REG(hw, TARC1);
1576                 tarc |= 1;
1577                 E1000_WRITE_REG(hw, TARC1, tarc);
1578         }
1579
1580         e1000_config_collision_dist(hw);
1581
1582         /* Setup Transmit Descriptor Settings for eop descriptor */
1583         adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
1584                 E1000_TXD_CMD_IFCS;
1585
1586         if (hw->mac_type < e1000_82543)
1587                 adapter->txd_cmd |= E1000_TXD_CMD_RPS;
1588         else
1589                 adapter->txd_cmd |= E1000_TXD_CMD_RS;
1590
1591         /* Cache if we're 82544 running in PCI-X because we'll
1592          * need this to apply a workaround later in the send path. */
1593         if (hw->mac_type == e1000_82544 &&
1594             hw->bus_type == e1000_bus_type_pcix)
1595                 adapter->pcix_82544 = 1;
1596
1597         E1000_WRITE_REG(hw, TCTL, tctl);
1598
1599 }
1600
1601 /**
1602  * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1603  * @adapter: board private structure
1604  * @rxdr:    rx descriptor ring (for a specific queue) to setup
1605  *
1606  * Returns 0 on success, negative on failure
1607  **/
1608
1609 static int
1610 e1000_setup_rx_resources(struct e1000_adapter *adapter,
1611                          struct e1000_rx_ring *rxdr)
1612 {
1613         struct pci_dev *pdev = adapter->pdev;
1614         int size, desc_len;
1615
1616         size = sizeof(struct e1000_buffer) * rxdr->count;
1617         rxdr->buffer_info = vmalloc(size);
1618         if (!rxdr->buffer_info) {
1619                 DPRINTK(PROBE, ERR,
1620                 "Unable to allocate memory for the receive descriptor ring\n");
1621                 return -ENOMEM;
1622         }
1623         memset(rxdr->buffer_info, 0, size);
1624
1625         size = sizeof(struct e1000_ps_page) * rxdr->count;
1626         rxdr->ps_page = kmalloc(size, GFP_KERNEL);
1627         if (!rxdr->ps_page) {
1628                 vfree(rxdr->buffer_info);
1629                 DPRINTK(PROBE, ERR,
1630                 "Unable to allocate memory for the receive descriptor ring\n");
1631                 return -ENOMEM;
1632         }
1633         memset(rxdr->ps_page, 0, size);
1634
1635         size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
1636         rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
1637         if (!rxdr->ps_page_dma) {
1638                 vfree(rxdr->buffer_info);
1639                 kfree(rxdr->ps_page);
1640                 DPRINTK(PROBE, ERR,
1641                 "Unable to allocate memory for the receive descriptor ring\n");
1642                 return -ENOMEM;
1643         }
1644         memset(rxdr->ps_page_dma, 0, size);
1645
1646         if (adapter->hw.mac_type <= e1000_82547_rev_2)
1647                 desc_len = sizeof(struct e1000_rx_desc);
1648         else
1649                 desc_len = sizeof(union e1000_rx_desc_packet_split);
1650
1651         /* Round up to nearest 4K */
1652
1653         rxdr->size = rxdr->count * desc_len;
1654         E1000_ROUNDUP(rxdr->size, 4096);
1655
1656         rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1657
1658         if (!rxdr->desc) {
1659                 DPRINTK(PROBE, ERR,
1660                 "Unable to allocate memory for the receive descriptor ring\n");
1661 setup_rx_desc_die:
1662                 vfree(rxdr->buffer_info);
1663                 kfree(rxdr->ps_page);
1664                 kfree(rxdr->ps_page_dma);
1665                 return -ENOMEM;
1666         }
1667
1668         /* Fix for errata 23, can't cross 64kB boundary */
1669         if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1670                 void *olddesc = rxdr->desc;
1671                 dma_addr_t olddma = rxdr->dma;
1672                 DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
1673                                      "at %p\n", rxdr->size, rxdr->desc);
1674                 /* Try again, without freeing the previous */
1675                 rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1676                 /* Failed allocation, critical failure */
1677                 if (!rxdr->desc) {
1678                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1679                         DPRINTK(PROBE, ERR,
1680                                 "Unable to allocate memory "
1681                                 "for the receive descriptor ring\n");
1682                         goto setup_rx_desc_die;
1683                 }
1684
1685                 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1686                         /* give up */
1687                         pci_free_consistent(pdev, rxdr->size, rxdr->desc,
1688                                             rxdr->dma);
1689                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1690                         DPRINTK(PROBE, ERR,
1691                                 "Unable to allocate aligned memory "
1692                                 "for the receive descriptor ring\n");
1693                         goto setup_rx_desc_die;
1694                 } else {
1695                         /* Free old allocation, new allocation was successful */
1696                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1697                 }
1698         }
1699         memset(rxdr->desc, 0, rxdr->size);
1700
1701         rxdr->next_to_clean = 0;
1702         rxdr->next_to_use = 0;
1703
1704         return 0;
1705 }
1706
1707 /**
1708  * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1709  *                                (Descriptors) for all queues
1710  * @adapter: board private structure
1711  *
1712  * Return 0 on success, negative on failure
1713  **/
1714
1715 int
1716 e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
1717 {
1718         int i, err = 0;
1719
1720         for (i = 0; i < adapter->num_rx_queues; i++) {
1721                 err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
1722                 if (err) {
1723                         DPRINTK(PROBE, ERR,
1724                                 "Allocation for Rx Queue %u failed\n", i);
1725                         for (i-- ; i >= 0; i--)
1726                                 e1000_free_rx_resources(adapter,
1727                                                         &adapter->rx_ring[i]);
1728                         break;
1729                 }
1730         }
1731
1732         return err;
1733 }
1734
1735 /**
1736  * e1000_setup_rctl - configure the receive control registers
1737  * @adapter: Board private structure
1738  **/
1739 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1740                         (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1741 static void
1742 e1000_setup_rctl(struct e1000_adapter *adapter)
1743 {
1744         uint32_t rctl, rfctl;
1745         uint32_t psrctl = 0;
1746 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
1747         uint32_t pages = 0;
1748 #endif
1749
1750         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1751
1752         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1753
1754         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
1755                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1756                 (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
1757
1758         if (adapter->hw.tbi_compatibility_on == 1)
1759                 rctl |= E1000_RCTL_SBP;
1760         else
1761                 rctl &= ~E1000_RCTL_SBP;
1762
1763         if (adapter->netdev->mtu <= ETH_DATA_LEN)
1764                 rctl &= ~E1000_RCTL_LPE;
1765         else
1766                 rctl |= E1000_RCTL_LPE;
1767
1768         /* Setup buffer sizes */
1769         rctl &= ~E1000_RCTL_SZ_4096;
1770         rctl |= E1000_RCTL_BSEX;
1771         switch (adapter->rx_buffer_len) {
1772                 case E1000_RXBUFFER_256:
1773                         rctl |= E1000_RCTL_SZ_256;
1774                         rctl &= ~E1000_RCTL_BSEX;
1775                         break;
1776                 case E1000_RXBUFFER_512:
1777                         rctl |= E1000_RCTL_SZ_512;
1778                         rctl &= ~E1000_RCTL_BSEX;
1779                         break;
1780                 case E1000_RXBUFFER_1024:
1781                         rctl |= E1000_RCTL_SZ_1024;
1782                         rctl &= ~E1000_RCTL_BSEX;
1783                         break;
1784                 case E1000_RXBUFFER_2048:
1785                 default:
1786                         rctl |= E1000_RCTL_SZ_2048;
1787                         rctl &= ~E1000_RCTL_BSEX;
1788                         break;
1789                 case E1000_RXBUFFER_4096:
1790                         rctl |= E1000_RCTL_SZ_4096;
1791                         break;
1792                 case E1000_RXBUFFER_8192:
1793                         rctl |= E1000_RCTL_SZ_8192;
1794                         break;
1795                 case E1000_RXBUFFER_16384:
1796                         rctl |= E1000_RCTL_SZ_16384;
1797                         break;
1798         }
1799
1800 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
1801         /* 82571 and greater support packet-split where the protocol
1802          * header is placed in skb->data and the packet data is
1803          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
1804          * In the case of a non-split, skb->data is linearly filled,
1805          * followed by the page buffers.  Therefore, skb->data is
1806          * sized to hold the largest protocol header.
1807          */
1808         /* allocations using alloc_page take too long for regular MTU
1809          * so only enable packet split for jumbo frames */
1810         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
1811         if ((adapter->hw.mac_type >= e1000_82571) && (pages <= 3) &&
1812             PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
1813                 adapter->rx_ps_pages = pages;
1814         else
1815                 adapter->rx_ps_pages = 0;
1816 #endif
1817         if (adapter->rx_ps_pages) {
1818                 /* Configure extra packet-split registers */
1819                 rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
1820                 rfctl |= E1000_RFCTL_EXTEN;
1821                 /* disable packet split support for IPv6 extension headers,
1822                  * because some malformed IPv6 headers can hang the RX */
1823                 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
1824                           E1000_RFCTL_NEW_IPV6_EXT_DIS);
1825
1826                 E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
1827
1828                 rctl |= E1000_RCTL_DTYP_PS;
1829
1830                 psrctl |= adapter->rx_ps_bsize0 >>
1831                         E1000_PSRCTL_BSIZE0_SHIFT;
1832
1833                 switch (adapter->rx_ps_pages) {
1834                 case 3:
1835                         psrctl |= PAGE_SIZE <<
1836                                 E1000_PSRCTL_BSIZE3_SHIFT;
1837                 case 2:
1838                         psrctl |= PAGE_SIZE <<
1839                                 E1000_PSRCTL_BSIZE2_SHIFT;
1840                 case 1:
1841                         psrctl |= PAGE_SIZE >>
1842                                 E1000_PSRCTL_BSIZE1_SHIFT;
1843                         break;
1844                 }
1845
1846                 E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
1847         }
1848
1849         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1850 }
1851
1852 /**
1853  * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1854  * @adapter: board private structure
1855  *
1856  * Configure the Rx unit of the MAC after a reset.
1857  **/
1858
1859 static void
1860 e1000_configure_rx(struct e1000_adapter *adapter)
1861 {
1862         uint64_t rdba;
1863         struct e1000_hw *hw = &adapter->hw;
1864         uint32_t rdlen, rctl, rxcsum, ctrl_ext;
1865
1866         if (adapter->rx_ps_pages) {
1867                 /* this is a 32 byte descriptor */
1868                 rdlen = adapter->rx_ring[0].count *
1869                         sizeof(union e1000_rx_desc_packet_split);
1870                 adapter->clean_rx = e1000_clean_rx_irq_ps;
1871                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
1872         } else {
1873                 rdlen = adapter->rx_ring[0].count *
1874                         sizeof(struct e1000_rx_desc);
1875                 adapter->clean_rx = e1000_clean_rx_irq;
1876                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
1877         }
1878
1879         /* disable receives while setting up the descriptors */
1880         rctl = E1000_READ_REG(hw, RCTL);
1881         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
1882
1883         /* set the Receive Delay Timer Register */
1884         E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
1885
1886         if (hw->mac_type >= e1000_82540) {
1887                 E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
1888                 if (adapter->itr > 1)
1889                         E1000_WRITE_REG(hw, ITR,
1890                                 1000000000 / (adapter->itr * 256));
1891         }
1892
1893         if (hw->mac_type >= e1000_82571) {
1894                 ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
1895                 /* Reset delay timers after every interrupt */
1896                 ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
1897 #ifdef CONFIG_E1000_NAPI
1898                 /* Auto-Mask interrupts upon ICR read. */
1899                 ctrl_ext |= E1000_CTRL_EXT_IAME;
1900 #endif
1901                 E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
1902                 E1000_WRITE_REG(hw, IAM, ~0);
1903                 E1000_WRITE_FLUSH(hw);
1904         }
1905
1906         /* Setup the HW Rx Head and Tail Descriptor Pointers and
1907          * the Base and Length of the Rx Descriptor Ring */
1908         switch (adapter->num_rx_queues) {
1909         case 1:
1910         default:
1911                 rdba = adapter->rx_ring[0].dma;
1912                 E1000_WRITE_REG(hw, RDLEN, rdlen);
1913                 E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
1914                 E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
1915                 E1000_WRITE_REG(hw, RDT, 0);
1916                 E1000_WRITE_REG(hw, RDH, 0);
1917                 adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
1918                 adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
1919                 break;
1920         }
1921
1922         /* Enable 82543 Receive Checksum Offload for TCP and UDP */
1923         if (hw->mac_type >= e1000_82543) {
1924                 rxcsum = E1000_READ_REG(hw, RXCSUM);
1925                 if (adapter->rx_csum == TRUE) {
1926                         rxcsum |= E1000_RXCSUM_TUOFL;
1927
1928                         /* Enable 82571 IPv4 payload checksum for UDP fragments
1929                          * Must be used in conjunction with packet-split. */
1930                         if ((hw->mac_type >= e1000_82571) &&
1931                             (adapter->rx_ps_pages)) {
1932                                 rxcsum |= E1000_RXCSUM_IPPCSE;
1933                         }
1934                 } else {
1935                         rxcsum &= ~E1000_RXCSUM_TUOFL;
1936                         /* don't need to clear IPPCSE as it defaults to 0 */
1937                 }
1938                 E1000_WRITE_REG(hw, RXCSUM, rxcsum);
1939         }
1940
1941         /* enable early receives on 82573, only takes effect if using > 2048
1942          * byte total frame size.  for example only for jumbo frames */
1943 #define E1000_ERT_2048 0x100
1944         if (hw->mac_type == e1000_82573)
1945                 E1000_WRITE_REG(hw, ERT, E1000_ERT_2048);
1946
1947         /* Enable Receives */
1948         E1000_WRITE_REG(hw, RCTL, rctl);
1949 }
1950
1951 /**
1952  * e1000_free_tx_resources - Free Tx Resources per Queue
1953  * @adapter: board private structure
1954  * @tx_ring: Tx descriptor ring for a specific queue
1955  *
1956  * Free all transmit software resources
1957  **/
1958
1959 static void
1960 e1000_free_tx_resources(struct e1000_adapter *adapter,
1961                         struct e1000_tx_ring *tx_ring)
1962 {
1963         struct pci_dev *pdev = adapter->pdev;
1964
1965         e1000_clean_tx_ring(adapter, tx_ring);
1966
1967         vfree(tx_ring->buffer_info);
1968         tx_ring->buffer_info = NULL;
1969
1970         pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
1971
1972         tx_ring->desc = NULL;
1973 }
1974
1975 /**
1976  * e1000_free_all_tx_resources - Free Tx Resources for All Queues
1977  * @adapter: board private structure
1978  *
1979  * Free all transmit software resources
1980  **/
1981
1982 void
1983 e1000_free_all_tx_resources(struct e1000_adapter *adapter)
1984 {
1985         int i;
1986
1987         for (i = 0; i < adapter->num_tx_queues; i++)
1988                 e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
1989 }
1990
1991 static void
1992 e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
1993                         struct e1000_buffer *buffer_info)
1994 {
1995         if (buffer_info->dma) {
1996                 pci_unmap_page(adapter->pdev,
1997                                 buffer_info->dma,
1998                                 buffer_info->length,
1999                                 PCI_DMA_TODEVICE);
2000                 buffer_info->dma = 0;
2001         }
2002         if (buffer_info->skb) {
2003                 dev_kfree_skb_any(buffer_info->skb);
2004                 buffer_info->skb = NULL;
2005         }
2006         /* buffer_info must be completely set up in the transmit path */
2007 }
2008
2009 /**
2010  * e1000_clean_tx_ring - Free Tx Buffers
2011  * @adapter: board private structure
2012  * @tx_ring: ring to be cleaned
2013  **/
2014
2015 static void
2016 e1000_clean_tx_ring(struct e1000_adapter *adapter,
2017                     struct e1000_tx_ring *tx_ring)
2018 {
2019         struct e1000_buffer *buffer_info;
2020         unsigned long size;
2021         unsigned int i;
2022
2023         /* Free all the Tx ring sk_buffs */
2024
2025         for (i = 0; i < tx_ring->count; i++) {
2026                 buffer_info = &tx_ring->buffer_info[i];
2027                 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
2028         }
2029
2030         size = sizeof(struct e1000_buffer) * tx_ring->count;
2031         memset(tx_ring->buffer_info, 0, size);
2032
2033         /* Zero out the descriptor ring */
2034
2035         memset(tx_ring->desc, 0, tx_ring->size);
2036
2037         tx_ring->next_to_use = 0;
2038         tx_ring->next_to_clean = 0;
2039         tx_ring->last_tx_tso = 0;
2040
2041         writel(0, adapter->hw.hw_addr + tx_ring->tdh);
2042         writel(0, adapter->hw.hw_addr + tx_ring->tdt);
2043 }
2044
2045 /**
2046  * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2047  * @adapter: board private structure
2048  **/
2049
2050 static void
2051 e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
2052 {
2053         int i;
2054
2055         for (i = 0; i < adapter->num_tx_queues; i++)
2056                 e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
2057 }
2058
2059 /**
2060  * e1000_free_rx_resources - Free Rx Resources
2061  * @adapter: board private structure
2062  * @rx_ring: ring to clean the resources from
2063  *
2064  * Free all receive software resources
2065  **/
2066
2067 static void
2068 e1000_free_rx_resources(struct e1000_adapter *adapter,
2069                         struct e1000_rx_ring *rx_ring)
2070 {
2071         struct pci_dev *pdev = adapter->pdev;
2072
2073         e1000_clean_rx_ring(adapter, rx_ring);
2074
2075         vfree(rx_ring->buffer_info);
2076         rx_ring->buffer_info = NULL;
2077         kfree(rx_ring->ps_page);
2078         rx_ring->ps_page = NULL;
2079         kfree(rx_ring->ps_page_dma);
2080         rx_ring->ps_page_dma = NULL;
2081
2082         pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
2083
2084         rx_ring->desc = NULL;
2085 }
2086
2087 /**
2088  * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2089  * @adapter: board private structure
2090  *
2091  * Free all receive software resources
2092  **/
2093
2094 void
2095 e1000_free_all_rx_resources(struct e1000_adapter *adapter)
2096 {
2097         int i;
2098
2099         for (i = 0; i < adapter->num_rx_queues; i++)
2100                 e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
2101 }
2102
2103 /**
2104  * e1000_clean_rx_ring - Free Rx Buffers per Queue
2105  * @adapter: board private structure
2106  * @rx_ring: ring to free buffers from
2107  **/
2108
2109 static void
2110 e1000_clean_rx_ring(struct e1000_adapter *adapter,
2111                     struct e1000_rx_ring *rx_ring)
2112 {
2113         struct e1000_buffer *buffer_info;
2114         struct e1000_ps_page *ps_page;
2115         struct e1000_ps_page_dma *ps_page_dma;
2116         struct pci_dev *pdev = adapter->pdev;
2117         unsigned long size;
2118         unsigned int i, j;
2119
2120         /* Free all the Rx ring sk_buffs */
2121         for (i = 0; i < rx_ring->count; i++) {
2122                 buffer_info = &rx_ring->buffer_info[i];
2123                 if (buffer_info->skb) {
2124                         pci_unmap_single(pdev,
2125                                          buffer_info->dma,
2126                                          buffer_info->length,
2127                                          PCI_DMA_FROMDEVICE);
2128
2129                         dev_kfree_skb(buffer_info->skb);
2130                         buffer_info->skb = NULL;
2131                 }
2132                 ps_page = &rx_ring->ps_page[i];
2133                 ps_page_dma = &rx_ring->ps_page_dma[i];
2134                 for (j = 0; j < adapter->rx_ps_pages; j++) {
2135                         if (!ps_page->ps_page[j]) break;
2136                         pci_unmap_page(pdev,
2137                                        ps_page_dma->ps_page_dma[j],
2138                                        PAGE_SIZE, PCI_DMA_FROMDEVICE);
2139                         ps_page_dma->ps_page_dma[j] = 0;
2140                         put_page(ps_page->ps_page[j]);
2141                         ps_page->ps_page[j] = NULL;
2142                 }
2143         }
2144
2145         size = sizeof(struct e1000_buffer) * rx_ring->count;
2146         memset(rx_ring->buffer_info, 0, size);
2147         size = sizeof(struct e1000_ps_page) * rx_ring->count;
2148         memset(rx_ring->ps_page, 0, size);
2149         size = sizeof(struct e1000_ps_page_dma) * rx_ring->count;
2150         memset(rx_ring->ps_page_dma, 0, size);
2151
2152         /* Zero out the descriptor ring */
2153
2154         memset(rx_ring->desc, 0, rx_ring->size);
2155
2156         rx_ring->next_to_clean = 0;
2157         rx_ring->next_to_use = 0;
2158
2159         writel(0, adapter->hw.hw_addr + rx_ring->rdh);
2160         writel(0, adapter->hw.hw_addr + rx_ring->rdt);
2161 }
2162
2163 /**
2164  * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2165  * @adapter: board private structure
2166  **/
2167
2168 static void
2169 e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
2170 {
2171         int i;
2172
2173         for (i = 0; i < adapter->num_rx_queues; i++)
2174                 e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
2175 }
2176
2177 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2178  * and memory write and invalidate disabled for certain operations
2179  */
2180 static void
2181 e1000_enter_82542_rst(struct e1000_adapter *adapter)
2182 {
2183         struct net_device *netdev = adapter->netdev;
2184         uint32_t rctl;
2185
2186         e1000_pci_clear_mwi(&adapter->hw);
2187
2188         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2189         rctl |= E1000_RCTL_RST;
2190         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2191         E1000_WRITE_FLUSH(&adapter->hw);
2192         mdelay(5);
2193
2194         if (netif_running(netdev))
2195                 e1000_clean_all_rx_rings(adapter);
2196 }
2197
2198 static void
2199 e1000_leave_82542_rst(struct e1000_adapter *adapter)
2200 {
2201         struct net_device *netdev = adapter->netdev;
2202         uint32_t rctl;
2203
2204         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2205         rctl &= ~E1000_RCTL_RST;
2206         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2207         E1000_WRITE_FLUSH(&adapter->hw);
2208         mdelay(5);
2209
2210         if (adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
2211                 e1000_pci_set_mwi(&adapter->hw);
2212
2213         if (netif_running(netdev)) {
2214                 /* No need to loop, because 82542 supports only 1 queue */
2215                 struct e1000_rx_ring *ring = &adapter->rx_ring[0];
2216                 e1000_configure_rx(adapter);
2217                 adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
2218         }
2219 }
2220
2221 /**
2222  * e1000_set_mac - Change the Ethernet Address of the NIC
2223  * @netdev: network interface device structure
2224  * @p: pointer to an address structure
2225  *
2226  * Returns 0 on success, negative on failure
2227  **/
2228
2229 static int
2230 e1000_set_mac(struct net_device *netdev, void *p)
2231 {
2232         struct e1000_adapter *adapter = netdev_priv(netdev);
2233         struct sockaddr *addr = p;
2234
2235         if (!is_valid_ether_addr(addr->sa_data))
2236                 return -EADDRNOTAVAIL;
2237
2238         /* 82542 2.0 needs to be in reset to write receive address registers */
2239
2240         if (adapter->hw.mac_type == e1000_82542_rev2_0)
2241                 e1000_enter_82542_rst(adapter);
2242
2243         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2244         memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
2245
2246         e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2247
2248         /* With 82571 controllers, LAA may be overwritten (with the default)
2249          * due to controller reset from the other port. */
2250         if (adapter->hw.mac_type == e1000_82571) {
2251                 /* activate the work around */
2252                 adapter->hw.laa_is_present = 1;
2253
2254                 /* Hold a copy of the LAA in RAR[14] This is done so that
2255                  * between the time RAR[0] gets clobbered  and the time it
2256                  * gets fixed (in e1000_watchdog), the actual LAA is in one
2257                  * of the RARs and no incoming packets directed to this port
2258                  * are dropped. Eventaully the LAA will be in RAR[0] and
2259                  * RAR[14] */
2260                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
2261                                         E1000_RAR_ENTRIES - 1);
2262         }
2263
2264         if (adapter->hw.mac_type == e1000_82542_rev2_0)
2265                 e1000_leave_82542_rst(adapter);
2266
2267         return 0;
2268 }
2269
2270 /**
2271  * e1000_set_multi - Multicast and Promiscuous mode set
2272  * @netdev: network interface device structure
2273  *
2274  * The set_multi entry point is called whenever the multicast address
2275  * list or the network interface flags are updated.  This routine is
2276  * responsible for configuring the hardware for proper multicast,
2277  * promiscuous mode, and all-multi behavior.
2278  **/
2279
2280 static void
2281 e1000_set_multi(struct net_device *netdev)
2282 {
2283         struct e1000_adapter *adapter = netdev_priv(netdev);
2284         struct e1000_hw *hw = &adapter->hw;
2285         struct dev_mc_list *mc_ptr;
2286         uint32_t rctl;
2287         uint32_t hash_value;
2288         int i, rar_entries = E1000_RAR_ENTRIES;
2289         int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
2290                                 E1000_NUM_MTA_REGISTERS_ICH8LAN :
2291                                 E1000_NUM_MTA_REGISTERS;
2292
2293         if (adapter->hw.mac_type == e1000_ich8lan)
2294                 rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
2295
2296         /* reserve RAR[14] for LAA over-write work-around */
2297         if (adapter->hw.mac_type == e1000_82571)
2298                 rar_entries--;
2299
2300         /* Check for Promiscuous and All Multicast modes */
2301
2302         rctl = E1000_READ_REG(hw, RCTL);
2303
2304         if (netdev->flags & IFF_PROMISC) {
2305                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2306         } else if (netdev->flags & IFF_ALLMULTI) {
2307                 rctl |= E1000_RCTL_MPE;
2308                 rctl &= ~E1000_RCTL_UPE;
2309         } else {
2310                 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2311         }
2312
2313         E1000_WRITE_REG(hw, RCTL, rctl);
2314
2315         /* 82542 2.0 needs to be in reset to write receive address registers */
2316
2317         if (hw->mac_type == e1000_82542_rev2_0)
2318                 e1000_enter_82542_rst(adapter);
2319
2320         /* load the first 14 multicast address into the exact filters 1-14
2321          * RAR 0 is used for the station MAC adddress
2322          * if there are not 14 addresses, go ahead and clear the filters
2323          * -- with 82571 controllers only 0-13 entries are filled here
2324          */
2325         mc_ptr = netdev->mc_list;
2326
2327         for (i = 1; i < rar_entries; i++) {
2328                 if (mc_ptr) {
2329                         e1000_rar_set(hw, mc_ptr->dmi_addr, i);
2330                         mc_ptr = mc_ptr->next;
2331                 } else {
2332                         E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
2333                         E1000_WRITE_FLUSH(hw);
2334                         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
2335                         E1000_WRITE_FLUSH(hw);
2336                 }
2337         }
2338
2339         /* clear the old settings from the multicast hash table */
2340
2341         for (i = 0; i < mta_reg_count; i++) {
2342                 E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
2343                 E1000_WRITE_FLUSH(hw);
2344         }
2345
2346         /* load any remaining addresses into the hash table */
2347
2348         for (; mc_ptr; mc_ptr = mc_ptr->next) {
2349                 hash_value = e1000_hash_mc_addr(hw, mc_ptr->dmi_addr);
2350                 e1000_mta_set(hw, hash_value);
2351         }
2352
2353         if (hw->mac_type == e1000_82542_rev2_0)
2354                 e1000_leave_82542_rst(adapter);
2355 }
2356
2357 /* Need to wait a few seconds after link up to get diagnostic information from
2358  * the phy */
2359
2360 static void
2361 e1000_update_phy_info(unsigned long data)
2362 {
2363         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2364         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
2365 }
2366
2367 /**
2368  * e1000_82547_tx_fifo_stall - Timer Call-back
2369  * @data: pointer to adapter cast into an unsigned long
2370  **/
2371
2372 static void
2373 e1000_82547_tx_fifo_stall(unsigned long data)
2374 {
2375         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2376         struct net_device *netdev = adapter->netdev;
2377         uint32_t tctl;
2378
2379         if (atomic_read(&adapter->tx_fifo_stall)) {
2380                 if ((E1000_READ_REG(&adapter->hw, TDT) ==
2381                     E1000_READ_REG(&adapter->hw, TDH)) &&
2382                    (E1000_READ_REG(&adapter->hw, TDFT) ==
2383                     E1000_READ_REG(&adapter->hw, TDFH)) &&
2384                    (E1000_READ_REG(&adapter->hw, TDFTS) ==
2385                     E1000_READ_REG(&adapter->hw, TDFHS))) {
2386                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2387                         E1000_WRITE_REG(&adapter->hw, TCTL,
2388                                         tctl & ~E1000_TCTL_EN);
2389                         E1000_WRITE_REG(&adapter->hw, TDFT,
2390                                         adapter->tx_head_addr);
2391                         E1000_WRITE_REG(&adapter->hw, TDFH,
2392                                         adapter->tx_head_addr);
2393                         E1000_WRITE_REG(&adapter->hw, TDFTS,
2394                                         adapter->tx_head_addr);
2395                         E1000_WRITE_REG(&adapter->hw, TDFHS,
2396                                         adapter->tx_head_addr);
2397                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2398                         E1000_WRITE_FLUSH(&adapter->hw);
2399
2400                         adapter->tx_fifo_head = 0;
2401                         atomic_set(&adapter->tx_fifo_stall, 0);
2402                         netif_wake_queue(netdev);
2403                 } else {
2404                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
2405                 }
2406         }
2407 }
2408
2409 /**
2410  * e1000_watchdog - Timer Call-back
2411  * @data: pointer to adapter cast into an unsigned long
2412  **/
2413 static void
2414 e1000_watchdog(unsigned long data)
2415 {
2416         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2417         struct net_device *netdev = adapter->netdev;
2418         struct e1000_tx_ring *txdr = adapter->tx_ring;
2419         uint32_t link, tctl;
2420         int32_t ret_val;
2421
2422         ret_val = e1000_check_for_link(&adapter->hw);
2423         if ((ret_val == E1000_ERR_PHY) &&
2424             (adapter->hw.phy_type == e1000_phy_igp_3) &&
2425             (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
2426                 /* See e1000_kumeran_lock_loss_workaround() */
2427                 DPRINTK(LINK, INFO,
2428                         "Gigabit has been disabled, downgrading speed\n");
2429         }
2430
2431         if (adapter->hw.mac_type == e1000_82573) {
2432                 e1000_enable_tx_pkt_filtering(&adapter->hw);
2433                 if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
2434                         e1000_update_mng_vlan(adapter);
2435         }
2436
2437         if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
2438            !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
2439                 link = !adapter->hw.serdes_link_down;
2440         else
2441                 link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
2442
2443         if (link) {
2444                 if (!netif_carrier_ok(netdev)) {
2445                         boolean_t txb2b = 1;
2446                         e1000_get_speed_and_duplex(&adapter->hw,
2447                                                    &adapter->link_speed,
2448                                                    &adapter->link_duplex);
2449
2450                         DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
2451                                adapter->link_speed,
2452                                adapter->link_duplex == FULL_DUPLEX ?
2453                                "Full Duplex" : "Half Duplex");
2454
2455                         /* tweak tx_queue_len according to speed/duplex
2456                          * and adjust the timeout factor */
2457                         netdev->tx_queue_len = adapter->tx_queue_len;
2458                         adapter->tx_timeout_factor = 1;
2459                         switch (adapter->link_speed) {
2460                         case SPEED_10:
2461                                 txb2b = 0;
2462                                 netdev->tx_queue_len = 10;
2463                                 adapter->tx_timeout_factor = 8;
2464                                 break;
2465                         case SPEED_100:
2466                                 txb2b = 0;
2467                                 netdev->tx_queue_len = 100;
2468                                 /* maybe add some timeout factor ? */
2469                                 break;
2470                         }
2471
2472                         if ((adapter->hw.mac_type == e1000_82571 ||
2473                              adapter->hw.mac_type == e1000_82572) &&
2474                             txb2b == 0) {
2475                                 uint32_t tarc0;
2476                                 tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
2477                                 tarc0 &= ~(1 << 21);
2478                                 E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
2479                         }
2480
2481 #ifdef NETIF_F_TSO
2482                         /* disable TSO for pcie and 10/100 speeds, to avoid
2483                          * some hardware issues */
2484                         if (!adapter->tso_force &&
2485                             adapter->hw.bus_type == e1000_bus_type_pci_express){
2486                                 switch (adapter->link_speed) {
2487                                 case SPEED_10:
2488                                 case SPEED_100:
2489                                         DPRINTK(PROBE,INFO,
2490                                         "10/100 speed: disabling TSO\n");
2491                                         netdev->features &= ~NETIF_F_TSO;
2492 #ifdef NETIF_F_TSO6
2493                                         netdev->features &= ~NETIF_F_TSO6;
2494 #endif
2495                                         break;
2496                                 case SPEED_1000:
2497                                         netdev->features |= NETIF_F_TSO;
2498 #ifdef NETIF_F_TSO6
2499                                         netdev->features |= NETIF_F_TSO6;
2500 #endif
2501                                         break;
2502                                 default:
2503                                         /* oops */
2504                                         break;
2505                                 }
2506                         }
2507 #endif
2508
2509                         /* enable transmits in the hardware, need to do this
2510                          * after setting TARC0 */
2511                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2512                         tctl |= E1000_TCTL_EN;
2513                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2514
2515                         netif_carrier_on(netdev);
2516                         netif_wake_queue(netdev);
2517                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2518                         adapter->smartspeed = 0;
2519                 }
2520         } else {
2521                 if (netif_carrier_ok(netdev)) {
2522                         adapter->link_speed = 0;
2523                         adapter->link_duplex = 0;
2524                         DPRINTK(LINK, INFO, "NIC Link is Down\n");
2525                         netif_carrier_off(netdev);
2526                         netif_stop_queue(netdev);
2527                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2528
2529                         /* 80003ES2LAN workaround--
2530                          * For packet buffer work-around on link down event;
2531                          * disable receives in the ISR and
2532                          * reset device here in the watchdog
2533                          */
2534                         if (adapter->hw.mac_type == e1000_80003es2lan)
2535                                 /* reset device */
2536                                 schedule_work(&adapter->reset_task);
2537                 }
2538
2539                 e1000_smartspeed(adapter);
2540         }
2541
2542         e1000_update_stats(adapter);
2543
2544         adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
2545         adapter->tpt_old = adapter->stats.tpt;
2546         adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
2547         adapter->colc_old = adapter->stats.colc;
2548
2549         adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
2550         adapter->gorcl_old = adapter->stats.gorcl;
2551         adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
2552         adapter->gotcl_old = adapter->stats.gotcl;
2553
2554         e1000_update_adaptive(&adapter->hw);
2555
2556         if (!netif_carrier_ok(netdev)) {
2557                 if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
2558                         /* We've lost link, so the controller stops DMA,
2559                          * but we've got queued Tx work that's never going
2560                          * to get done, so reset controller to flush Tx.
2561                          * (Do the reset outside of interrupt context). */
2562                         adapter->tx_timeout_count++;
2563                         schedule_work(&adapter->reset_task);
2564                 }
2565         }
2566
2567         /* Dynamic mode for Interrupt Throttle Rate (ITR) */
2568         if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) {
2569                 /* Symmetric Tx/Rx gets a reduced ITR=2000; Total
2570                  * asymmetrical Tx or Rx gets ITR=8000; everyone
2571                  * else is between 2000-8000. */
2572                 uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000;
2573                 uint32_t dif = (adapter->gotcl > adapter->gorcl ?
2574                         adapter->gotcl - adapter->gorcl :
2575                         adapter->gorcl - adapter->gotcl) / 10000;
2576                 uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
2577                 E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256));
2578         }
2579
2580         /* Cause software interrupt to ensure rx ring is cleaned */
2581         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
2582
2583         /* Force detection of hung controller every watchdog period */
2584         adapter->detect_tx_hung = TRUE;
2585
2586         /* With 82571 controllers, LAA may be overwritten due to controller
2587          * reset from the other port. Set the appropriate LAA in RAR[0] */
2588         if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
2589                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2590
2591         /* Reset the timer */
2592         mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
2593 }
2594
2595 #define E1000_TX_FLAGS_CSUM             0x00000001
2596 #define E1000_TX_FLAGS_VLAN             0x00000002
2597 #define E1000_TX_FLAGS_TSO              0x00000004
2598 #define E1000_TX_FLAGS_IPV4             0x00000008
2599 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
2600 #define E1000_TX_FLAGS_VLAN_SHIFT       16
2601
2602 static int
2603 e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2604           struct sk_buff *skb)
2605 {
2606 #ifdef NETIF_F_TSO
2607         struct e1000_context_desc *context_desc;
2608         struct e1000_buffer *buffer_info;
2609         unsigned int i;
2610         uint32_t cmd_length = 0;
2611         uint16_t ipcse = 0, tucse, mss;
2612         uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
2613         int err;
2614
2615         if (skb_is_gso(skb)) {
2616                 if (skb_header_cloned(skb)) {
2617                         err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2618                         if (err)
2619                                 return err;
2620                 }
2621
2622                 hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
2623                 mss = skb_shinfo(skb)->gso_size;
2624                 if (skb->protocol == htons(ETH_P_IP)) {
2625                         skb->nh.iph->tot_len = 0;
2626                         skb->nh.iph->check = 0;
2627                         skb->h.th->check =
2628                                 ~csum_tcpudp_magic(skb->nh.iph->saddr,
2629                                                    skb->nh.iph->daddr,
2630                                                    0,
2631                                                    IPPROTO_TCP,
2632                                                    0);
2633                         cmd_length = E1000_TXD_CMD_IP;
2634                         ipcse = skb->h.raw - skb->data - 1;
2635 #ifdef NETIF_F_TSO6
2636                 } else if (skb->protocol == htons(ETH_P_IPV6)) {
2637                         skb->nh.ipv6h->payload_len = 0;
2638                         skb->h.th->check =
2639                                 ~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
2640                                                  &skb->nh.ipv6h->daddr,
2641                                                  0,
2642                                                  IPPROTO_TCP,
2643                                                  0);
2644                         ipcse = 0;
2645 #endif
2646                 }
2647                 ipcss = skb->nh.raw - skb->data;
2648                 ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
2649                 tucss = skb->h.raw - skb->data;
2650                 tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
2651                 tucse = 0;
2652
2653                 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
2654                                E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
2655
2656                 i = tx_ring->next_to_use;
2657                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2658                 buffer_info = &tx_ring->buffer_info[i];
2659
2660                 context_desc->lower_setup.ip_fields.ipcss  = ipcss;
2661                 context_desc->lower_setup.ip_fields.ipcso  = ipcso;
2662                 context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
2663                 context_desc->upper_setup.tcp_fields.tucss = tucss;
2664                 context_desc->upper_setup.tcp_fields.tucso = tucso;
2665                 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
2666                 context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
2667                 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
2668                 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
2669
2670                 buffer_info->time_stamp = jiffies;
2671                 buffer_info->next_to_watch = i;
2672
2673                 if (++i == tx_ring->count) i = 0;
2674                 tx_ring->next_to_use = i;
2675
2676                 return TRUE;
2677         }
2678 #endif
2679
2680         return FALSE;
2681 }
2682
2683 static boolean_t
2684 e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2685               struct sk_buff *skb)
2686 {
2687         struct e1000_context_desc *context_desc;
2688         struct e1000_buffer *buffer_info;
2689         unsigned int i;
2690         uint8_t css;
2691
2692         if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2693                 css = skb->h.raw - skb->data;
2694
2695                 i = tx_ring->next_to_use;
2696                 buffer_info = &tx_ring->buffer_info[i];
2697                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2698
2699                 context_desc->upper_setup.tcp_fields.tucss = css;
2700                 context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
2701                 context_desc->upper_setup.tcp_fields.tucse = 0;
2702                 context_desc->tcp_seg_setup.data = 0;
2703                 context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
2704
2705                 buffer_info->time_stamp = jiffies;
2706                 buffer_info->next_to_watch = i;
2707
2708                 if (unlikely(++i == tx_ring->count)) i = 0;
2709                 tx_ring->next_to_use = i;
2710
2711                 return TRUE;
2712         }
2713
2714         return FALSE;
2715 }
2716
2717 #define E1000_MAX_TXD_PWR       12
2718 #define E1000_MAX_DATA_PER_TXD  (1<<E1000_MAX_TXD_PWR)
2719
2720 static int
2721 e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2722              struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
2723              unsigned int nr_frags, unsigned int mss)
2724 {
2725         struct e1000_buffer *buffer_info;
2726         unsigned int len = skb->len;
2727         unsigned int offset = 0, size, count = 0, i;
2728         unsigned int f;
2729         len -= skb->data_len;
2730
2731         i = tx_ring->next_to_use;
2732
2733         while (len) {
2734                 buffer_info = &tx_ring->buffer_info[i];
2735                 size = min(len, max_per_txd);
2736 #ifdef NETIF_F_TSO
2737                 /* Workaround for Controller erratum --
2738                  * descriptor for non-tso packet in a linear SKB that follows a
2739                  * tso gets written back prematurely before the data is fully
2740                  * DMA'd to the controller */
2741                 if (!skb->data_len && tx_ring->last_tx_tso &&
2742                     !skb_is_gso(skb)) {
2743                         tx_ring->last_tx_tso = 0;
2744                         size -= 4;
2745                 }
2746
2747                 /* Workaround for premature desc write-backs
2748                  * in TSO mode.  Append 4-byte sentinel desc */
2749                 if (unlikely(mss && !nr_frags && size == len && size > 8))
2750                         size -= 4;
2751 #endif
2752                 /* work-around for errata 10 and it applies
2753                  * to all controllers in PCI-X mode
2754                  * The fix is to make sure that the first descriptor of a
2755                  * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2756                  */
2757                 if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
2758                                 (size > 2015) && count == 0))
2759                         size = 2015;
2760
2761                 /* Workaround for potential 82544 hang in PCI-X.  Avoid
2762                  * terminating buffers within evenly-aligned dwords. */
2763                 if (unlikely(adapter->pcix_82544 &&
2764                    !((unsigned long)(skb->data + offset + size - 1) & 4) &&
2765                    size > 4))
2766                         size -= 4;
2767
2768                 buffer_info->length = size;
2769                 buffer_info->dma =
2770                         pci_map_single(adapter->pdev,
2771                                 skb->data + offset,
2772                                 size,
2773                                 PCI_DMA_TODEVICE);
2774                 buffer_info->time_stamp = jiffies;
2775                 buffer_info->next_to_watch = i;
2776
2777                 len -= size;
2778                 offset += size;
2779                 count++;
2780                 if (unlikely(++i == tx_ring->count)) i = 0;
2781         }
2782
2783         for (f = 0; f < nr_frags; f++) {
2784                 struct skb_frag_struct *frag;
2785
2786                 frag = &skb_shinfo(skb)->frags[f];
2787                 len = frag->size;
2788                 offset = frag->page_offset;
2789
2790                 while (len) {
2791                         buffer_info = &tx_ring->buffer_info[i];
2792                         size = min(len, max_per_txd);
2793 #ifdef NETIF_F_TSO
2794                         /* Workaround for premature desc write-backs
2795                          * in TSO mode.  Append 4-byte sentinel desc */
2796                         if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
2797                                 size -= 4;
2798 #endif
2799                         /* Workaround for potential 82544 hang in PCI-X.
2800                          * Avoid terminating buffers within evenly-aligned
2801                          * dwords. */
2802                         if (unlikely(adapter->pcix_82544 &&
2803                            !((unsigned long)(frag->page+offset+size-1) & 4) &&
2804                            size > 4))
2805                                 size -= 4;
2806
2807                         buffer_info->length = size;
2808                         buffer_info->dma =
2809                                 pci_map_page(adapter->pdev,
2810                                         frag->page,
2811                                         offset,
2812                                         size,
2813                                         PCI_DMA_TODEVICE);
2814                         buffer_info->time_stamp = jiffies;
2815                         buffer_info->next_to_watch = i;
2816
2817                         len -= size;
2818                         offset += size;
2819                         count++;
2820                         if (unlikely(++i == tx_ring->count)) i = 0;
2821                 }
2822         }
2823
2824         i = (i == 0) ? tx_ring->count - 1 : i - 1;
2825         tx_ring->buffer_info[i].skb = skb;
2826         tx_ring->buffer_info[first].next_to_watch = i;
2827
2828         return count;
2829 }
2830
2831 static void
2832 e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2833                int tx_flags, int count)
2834 {
2835         struct e1000_tx_desc *tx_desc = NULL;
2836         struct e1000_buffer *buffer_info;
2837         uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
2838         unsigned int i;
2839
2840         if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
2841                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
2842                              E1000_TXD_CMD_TSE;
2843                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2844
2845                 if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
2846                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
2847         }
2848
2849         if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
2850                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
2851                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2852         }
2853
2854         if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
2855                 txd_lower |= E1000_TXD_CMD_VLE;
2856                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
2857         }
2858
2859         i = tx_ring->next_to_use;
2860
2861         while (count--) {
2862                 buffer_info = &tx_ring->buffer_info[i];
2863                 tx_desc = E1000_TX_DESC(*tx_ring, i);
2864                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
2865                 tx_desc->lower.data =
2866                         cpu_to_le32(txd_lower | buffer_info->length);
2867                 tx_desc->upper.data = cpu_to_le32(txd_upper);
2868                 if (unlikely(++i == tx_ring->count)) i = 0;
2869         }
2870
2871         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
2872
2873         /* Force memory writes to complete before letting h/w
2874          * know there are new descriptors to fetch.  (Only
2875          * applicable for weak-ordered memory model archs,
2876          * such as IA-64). */
2877         wmb();
2878
2879         tx_ring->next_to_use = i;
2880         writel(i, adapter->hw.hw_addr + tx_ring->tdt);
2881         /* we need this if more than one processor can write to our tail
2882          * at a time, it syncronizes IO on IA64/Altix systems */
2883         mmiowb();
2884 }
2885
2886 /**
2887  * 82547 workaround to avoid controller hang in half-duplex environment.
2888  * The workaround is to avoid queuing a large packet that would span
2889  * the internal Tx FIFO ring boundary by notifying the stack to resend
2890  * the packet at a later time.  This gives the Tx FIFO an opportunity to
2891  * flush all packets.  When that occurs, we reset the Tx FIFO pointers
2892  * to the beginning of the Tx FIFO.
2893  **/
2894
2895 #define E1000_FIFO_HDR                  0x10
2896 #define E1000_82547_PAD_LEN             0x3E0
2897
2898 static int
2899 e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
2900 {
2901         uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
2902         uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
2903
2904         E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
2905
2906         if (adapter->link_duplex != HALF_DUPLEX)
2907                 goto no_fifo_stall_required;
2908
2909         if (atomic_read(&adapter->tx_fifo_stall))
2910                 return 1;
2911
2912         if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
2913                 atomic_set(&adapter->tx_fifo_stall, 1);
2914                 return 1;
2915         }
2916
2917 no_fifo_stall_required:
2918         adapter->tx_fifo_head += skb_fifo_len;
2919         if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
2920                 adapter->tx_fifo_head -= adapter->tx_fifo_size;
2921         return 0;
2922 }
2923
2924 #define MINIMUM_DHCP_PACKET_SIZE 282
2925 static int
2926 e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
2927 {
2928         struct e1000_hw *hw =  &adapter->hw;
2929         uint16_t length, offset;
2930         if (vlan_tx_tag_present(skb)) {
2931                 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
2932                         ( adapter->hw.mng_cookie.status &
2933                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
2934                         return 0;
2935         }
2936         if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
2937                 struct ethhdr *eth = (struct ethhdr *) skb->data;
2938                 if ((htons(ETH_P_IP) == eth->h_proto)) {
2939                         const struct iphdr *ip =
2940                                 (struct iphdr *)((uint8_t *)skb->data+14);
2941                         if (IPPROTO_UDP == ip->protocol) {
2942                                 struct udphdr *udp =
2943                                         (struct udphdr *)((uint8_t *)ip +
2944                                                 (ip->ihl << 2));
2945                                 if (ntohs(udp->dest) == 67) {
2946                                         offset = (uint8_t *)udp + 8 - skb->data;
2947                                         length = skb->len - offset;
2948
2949                                         return e1000_mng_write_dhcp_info(hw,
2950                                                         (uint8_t *)udp + 8,
2951                                                         length);
2952                                 }
2953                         }
2954                 }
2955         }
2956         return 0;
2957 }
2958
2959 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
2960 {
2961         struct e1000_adapter *adapter = netdev_priv(netdev);
2962         struct e1000_tx_ring *tx_ring = adapter->tx_ring;
2963
2964         netif_stop_queue(netdev);
2965         /* Herbert's original patch had:
2966          *  smp_mb__after_netif_stop_queue();
2967          * but since that doesn't exist yet, just open code it. */
2968         smp_mb();
2969
2970         /* We need to check again in a case another CPU has just
2971          * made room available. */
2972         if (likely(E1000_DESC_UNUSED(tx_ring) < size))
2973                 return -EBUSY;
2974
2975         /* A reprieve! */
2976         netif_start_queue(netdev);
2977         ++adapter->restart_queue;
2978         return 0;
2979 }
2980
2981 static int e1000_maybe_stop_tx(struct net_device *netdev,
2982                                struct e1000_tx_ring *tx_ring, int size)
2983 {
2984         if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
2985                 return 0;
2986         return __e1000_maybe_stop_tx(netdev, size);
2987 }
2988
2989 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
2990 static int
2991 e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
2992 {
2993         struct e1000_adapter *adapter = netdev_priv(netdev);
2994         struct e1000_tx_ring *tx_ring;
2995         unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
2996         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
2997         unsigned int tx_flags = 0;
2998         unsigned int len = skb->len;
2999         unsigned long flags;
3000         unsigned int nr_frags = 0;
3001         unsigned int mss = 0;
3002         int count = 0;
3003         int tso;
3004         unsigned int f;
3005         len -= skb->data_len;
3006
3007         /* This goes back to the question of how to logically map a tx queue
3008          * to a flow.  Right now, performance is impacted slightly negatively
3009          * if using multiple tx queues.  If the stack breaks away from a
3010          * single qdisc implementation, we can look at this again. */
3011         tx_ring = adapter->tx_ring;
3012
3013         if (unlikely(skb->len <= 0)) {
3014                 dev_kfree_skb_any(skb);
3015                 return NETDEV_TX_OK;
3016         }
3017
3018         /* 82571 and newer doesn't need the workaround that limited descriptor
3019          * length to 4kB */
3020         if (adapter->hw.mac_type >= e1000_82571)
3021                 max_per_txd = 8192;
3022
3023 #ifdef NETIF_F_TSO
3024         mss = skb_shinfo(skb)->gso_size;
3025         /* The controller does a simple calculation to
3026          * make sure there is enough room in the FIFO before
3027          * initiating the DMA for each buffer.  The calc is:
3028          * 4 = ceil(buffer len/mss).  To make sure we don't
3029          * overrun the FIFO, adjust the max buffer len if mss
3030          * drops. */
3031         if (mss) {
3032                 uint8_t hdr_len;
3033                 max_per_txd = min(mss << 2, max_per_txd);
3034                 max_txd_pwr = fls(max_per_txd) - 1;
3035
3036                 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
3037                 * points to just header, pull a few bytes of payload from
3038                 * frags into skb->data */
3039                 hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
3040                 if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
3041                         switch (adapter->hw.mac_type) {
3042                                 unsigned int pull_size;
3043                         case e1000_82571:
3044                         case e1000_82572:
3045                         case e1000_82573:
3046                         case e1000_ich8lan:
3047                                 pull_size = min((unsigned int)4, skb->data_len);
3048                                 if (!__pskb_pull_tail(skb, pull_size)) {
3049                                         DPRINTK(DRV, ERR,
3050                                                 "__pskb_pull_tail failed.\n");
3051                                         dev_kfree_skb_any(skb);
3052                                         return NETDEV_TX_OK;
3053                                 }
3054                                 len = skb->len - skb->data_len;
3055                                 break;
3056                         default:
3057                                 /* do nothing */
3058                                 break;
3059                         }
3060                 }
3061         }
3062
3063         /* reserve a descriptor for the offload context */
3064         if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
3065                 count++;
3066         count++;
3067 #else
3068         if (skb->ip_summed == CHECKSUM_PARTIAL)
3069                 count++;
3070 #endif
3071
3072 #ifdef NETIF_F_TSO
3073         /* Controller Erratum workaround */
3074         if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
3075                 count++;
3076 #endif
3077
3078         count += TXD_USE_COUNT(len, max_txd_pwr);
3079
3080         if (adapter->pcix_82544)
3081                 count++;
3082
3083         /* work-around for errata 10 and it applies to all controllers
3084          * in PCI-X mode, so add one more descriptor to the count
3085          */
3086         if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
3087                         (len > 2015)))
3088                 count++;
3089
3090         nr_frags = skb_shinfo(skb)->nr_frags;
3091         for (f = 0; f < nr_frags; f++)
3092                 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
3093                                        max_txd_pwr);
3094         if (adapter->pcix_82544)
3095                 count += nr_frags;
3096
3097
3098         if (adapter->hw.tx_pkt_filtering &&
3099             (adapter->hw.mac_type == e1000_82573))
3100                 e1000_transfer_dhcp_info(adapter, skb);
3101
3102         local_irq_save(flags);
3103         if (!spin_trylock(&tx_ring->tx_lock)) {
3104                 /* Collision - tell upper layer to requeue */
3105                 local_irq_restore(flags);
3106                 return NETDEV_TX_LOCKED;
3107         }
3108
3109         /* need: count + 2 desc gap to keep tail from touching
3110          * head, otherwise try next time */
3111         if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) {
3112                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3113                 return NETDEV_TX_BUSY;
3114         }
3115
3116         if (unlikely(adapter->hw.mac_type == e1000_82547)) {
3117                 if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
3118                         netif_stop_queue(netdev);
3119                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
3120                         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3121                         return NETDEV_TX_BUSY;
3122                 }
3123         }
3124
3125         if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
3126                 tx_flags |= E1000_TX_FLAGS_VLAN;
3127                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
3128         }
3129
3130         first = tx_ring->next_to_use;
3131
3132         tso = e1000_tso(adapter, tx_ring, skb);
3133         if (tso < 0) {
3134                 dev_kfree_skb_any(skb);
3135                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3136                 return NETDEV_TX_OK;
3137         }
3138
3139         if (likely(tso)) {
3140                 tx_ring->last_tx_tso = 1;
3141                 tx_flags |= E1000_TX_FLAGS_TSO;
3142         } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
3143                 tx_flags |= E1000_TX_FLAGS_CSUM;
3144
3145         /* Old method was to assume IPv4 packet by default if TSO was enabled.
3146          * 82571 hardware supports TSO capabilities for IPv6 as well...
3147          * no longer assume, we must. */
3148         if (likely(skb->protocol == htons(ETH_P_IP)))
3149                 tx_flags |= E1000_TX_FLAGS_IPV4;
3150
3151         e1000_tx_queue(adapter, tx_ring, tx_flags,
3152                        e1000_tx_map(adapter, tx_ring, skb, first,
3153                                     max_per_txd, nr_frags, mss));
3154
3155         netdev->trans_start = jiffies;
3156
3157         /* Make sure there is space in the ring for the next send. */
3158         e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
3159
3160         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3161         return NETDEV_TX_OK;
3162 }
3163
3164 /**
3165  * e1000_tx_timeout - Respond to a Tx Hang
3166  * @netdev: network interface device structure
3167  **/
3168
3169 static void
3170 e1000_tx_timeout(struct net_device *netdev)
3171 {
3172         struct e1000_adapter *adapter = netdev_priv(netdev);
3173
3174         /* Do the reset outside of interrupt context */
3175         adapter->tx_timeout_count++;
3176         schedule_work(&adapter->reset_task);
3177 }
3178
3179 static void
3180 e1000_reset_task(struct net_device *netdev)
3181 {
3182         struct e1000_adapter *adapter = netdev_priv(netdev);
3183
3184         e1000_reinit_locked(adapter);
3185 }
3186
3187 /**
3188  * e1000_get_stats - Get System Network Statistics
3189  * @netdev: network interface device structure
3190  *
3191  * Returns the address of the device statistics structure.
3192  * The statistics are actually updated from the timer callback.
3193  **/
3194
3195 static struct net_device_stats *
3196 e1000_get_stats(struct net_device *netdev)
3197 {
3198         struct e1000_adapter *adapter = netdev_priv(netdev);
3199
3200         /* only return the current stats */
3201         return &adapter->net_stats;
3202 }
3203
3204 /**
3205  * e1000_change_mtu - Change the Maximum Transfer Unit
3206  * @netdev: network interface device structure
3207  * @new_mtu: new value for maximum frame size
3208  *
3209  * Returns 0 on success, negative on failure
3210  **/
3211
3212 static int
3213 e1000_change_mtu(struct net_device *netdev, int new_mtu)
3214 {
3215         struct e1000_adapter *adapter = netdev_priv(netdev);
3216         int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
3217         uint16_t eeprom_data = 0;
3218
3219         if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
3220             (max_frame > MAX_JUMBO_FRAME_SIZE)) {
3221                 DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
3222                 return -EINVAL;
3223         }
3224
3225         /* Adapter-specific max frame size limits. */
3226         switch (adapter->hw.mac_type) {
3227         case e1000_undefined ... e1000_82542_rev2_1:
3228         case e1000_ich8lan:
3229                 if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3230                         DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
3231                         return -EINVAL;
3232                 }
3233                 break;
3234         case e1000_82573:
3235                 /* Jumbo Frames not supported if:
3236                  * - this is not an 82573L device
3237                  * - ASPM is enabled in any way (0x1A bits 3:2) */
3238                 e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1,
3239                                   &eeprom_data);
3240                 if ((adapter->hw.device_id != E1000_DEV_ID_82573L) ||
3241                     (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
3242                         if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3243                                 DPRINTK(PROBE, ERR,
3244                                         "Jumbo Frames not supported.\n");
3245                                 return -EINVAL;
3246                         }
3247                         break;
3248                 }
3249                 /* ERT will be enabled later to enable wire speed receives */
3250
3251                 /* fall through to get support */
3252         case e1000_82571:
3253         case e1000_82572:
3254         case e1000_80003es2lan:
3255 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3256                 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
3257                         DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
3258                         return -EINVAL;
3259                 }
3260                 break;
3261         default:
3262                 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3263                 break;
3264         }
3265
3266         /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3267          * means we reserve 2 more, this pushes us to allocate from the next
3268          * larger slab size
3269          * i.e. RXBUFFER_2048 --> size-4096 slab */
3270
3271         if (max_frame <= E1000_RXBUFFER_256)
3272                 adapter->rx_buffer_len = E1000_RXBUFFER_256;
3273         else if (max_frame <= E1000_RXBUFFER_512)
3274                 adapter->rx_buffer_len = E1000_RXBUFFER_512;
3275         else if (max_frame <= E1000_RXBUFFER_1024)
3276                 adapter->rx_buffer_len = E1000_RXBUFFER_1024;
3277         else if (max_frame <= E1000_RXBUFFER_2048)
3278                 adapter->rx_buffer_len = E1000_RXBUFFER_2048;
3279         else if (max_frame <= E1000_RXBUFFER_4096)
3280                 adapter->rx_buffer_len = E1000_RXBUFFER_4096;
3281         else if (max_frame <= E1000_RXBUFFER_8192)
3282                 adapter->rx_buffer_len = E1000_RXBUFFER_8192;
3283         else if (max_frame <= E1000_RXBUFFER_16384)
3284                 adapter->rx_buffer_len = E1000_RXBUFFER_16384;
3285
3286         /* adjust allocation if LPE protects us, and we aren't using SBP */
3287         if (!adapter->hw.tbi_compatibility_on &&
3288             ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
3289              (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
3290                 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
3291
3292         netdev->mtu = new_mtu;
3293
3294         if (netif_running(netdev))
3295                 e1000_reinit_locked(adapter);
3296
3297         adapter->hw.max_frame_size = max_frame;
3298
3299         return 0;
3300 }
3301
3302 /**
3303  * e1000_update_stats - Update the board statistics counters
3304  * @adapter: board private structure
3305  **/
3306
3307 void
3308 e1000_update_stats(struct e1000_adapter *adapter)
3309 {
3310         struct e1000_hw *hw = &adapter->hw;
3311         struct pci_dev *pdev = adapter->pdev;
3312         unsigned long flags;
3313         uint16_t phy_tmp;
3314
3315 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3316
3317         /*
3318          * Prevent stats update while adapter is being reset, or if the pci
3319          * connection is down.
3320          */
3321         if (adapter->link_speed == 0)
3322                 return;
3323         if (pdev->error_state && pdev->error_state != pci_channel_io_normal)
3324                 return;
3325
3326         spin_lock_irqsave(&adapter->stats_lock, flags);
3327
3328         /* these counters are modified from e1000_adjust_tbi_stats,
3329          * called from the interrupt context, so they must only
3330          * be written while holding adapter->stats_lock
3331          */
3332
3333         adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
3334         adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
3335         adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
3336         adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
3337         adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
3338         adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
3339         adapter->stats.roc += E1000_READ_REG(hw, ROC);
3340
3341         if (adapter->hw.mac_type != e1000_ich8lan) {
3342                 adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
3343                 adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
3344                 adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
3345                 adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
3346                 adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
3347                 adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
3348         }
3349
3350         adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
3351         adapter->stats.mpc += E1000_READ_REG(hw, MPC);
3352         adapter->stats.scc += E1000_READ_REG(hw, SCC);
3353         adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
3354         adapter->stats.mcc += E1000_READ_REG(hw, MCC);
3355         adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
3356         adapter->stats.dc += E1000_READ_REG(hw, DC);
3357         adapter->stats.sec += E1000_READ_REG(hw, SEC);
3358         adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
3359         adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
3360         adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
3361         adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
3362         adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
3363         adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
3364         adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
3365         adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
3366         adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
3367         adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
3368         adapter->stats.ruc += E1000_READ_REG(hw, RUC);
3369         adapter->stats.rfc += E1000_READ_REG(hw, RFC);
3370         adapter->stats.rjc += E1000_READ_REG(hw, RJC);
3371         adapter->stats.torl += E1000_READ_REG(hw, TORL);
3372         adapter->stats.torh += E1000_READ_REG(hw, TORH);
3373         adapter->stats.totl += E1000_READ_REG(hw, TOTL);
3374         adapter->stats.toth += E1000_READ_REG(hw, TOTH);
3375         adapter->stats.tpr += E1000_READ_REG(hw, TPR);
3376
3377         if (adapter->hw.mac_type != e1000_ich8lan) {
3378                 adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
3379                 adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
3380                 adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
3381                 adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
3382                 adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
3383                 adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
3384         }
3385
3386         adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
3387         adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
3388
3389         /* used for adaptive IFS */
3390
3391         hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
3392         adapter->stats.tpt += hw->tx_packet_delta;
3393         hw->collision_delta = E1000_READ_REG(hw, COLC);
3394         adapter->stats.colc += hw->collision_delta;
3395
3396         if (hw->mac_type >= e1000_82543) {
3397                 adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
3398                 adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
3399                 adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
3400                 adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
3401                 adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
3402                 adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
3403         }
3404         if (hw->mac_type > e1000_82547_rev_2) {
3405                 adapter->stats.iac += E1000_READ_REG(hw, IAC);
3406                 adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
3407
3408                 if (adapter->hw.mac_type != e1000_ich8lan) {
3409                         adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
3410                         adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
3411                         adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
3412                         adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
3413                         adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
3414                         adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
3415                         adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
3416                 }
3417         }
3418
3419         /* Fill out the OS statistics structure */
3420         adapter->net_stats.rx_packets = adapter->stats.gprc;
3421         adapter->net_stats.tx_packets = adapter->stats.gptc;
3422         adapter->net_stats.rx_bytes = adapter->stats.gorcl;
3423         adapter->net_stats.tx_bytes = adapter->stats.gotcl;
3424         adapter->net_stats.multicast = adapter->stats.mprc;
3425         adapter->net_stats.collisions = adapter->stats.colc;
3426
3427         /* Rx Errors */
3428
3429         /* RLEC on some newer hardware can be incorrect so build
3430         * our own version based on RUC and ROC */
3431         adapter->net_stats.rx_errors = adapter->stats.rxerrc +
3432                 adapter->stats.crcerrs + adapter->stats.algnerrc +
3433                 adapter->stats.ruc + adapter->stats.roc +
3434                 adapter->stats.cexterr;
3435         adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
3436         adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
3437         adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
3438         adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
3439         adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
3440
3441         /* Tx Errors */
3442         adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
3443         adapter->net_stats.tx_errors = adapter->stats.txerrc;
3444         adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
3445         adapter->net_stats.tx_window_errors = adapter->stats.latecol;
3446         adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
3447
3448         /* Tx Dropped needs to be maintained elsewhere */
3449
3450         /* Phy Stats */
3451         if (hw->media_type == e1000_media_type_copper) {
3452                 if ((adapter->link_speed == SPEED_1000) &&
3453                    (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
3454                         phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
3455                         adapter->phy_stats.idle_errors += phy_tmp;
3456                 }
3457
3458                 if ((hw->mac_type <= e1000_82546) &&
3459                    (hw->phy_type == e1000_phy_m88) &&
3460                    !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
3461                         adapter->phy_stats.receive_errors += phy_tmp;
3462         }
3463
3464         spin_unlock_irqrestore(&adapter->stats_lock, flags);
3465 }
3466
3467 /**
3468  * e1000_intr - Interrupt Handler
3469  * @irq: interrupt number
3470  * @data: pointer to a network interface device structure
3471  **/
3472
3473 static irqreturn_t
3474 e1000_intr(int irq, void *data)
3475 {
3476         struct net_device *netdev = data;
3477         struct e1000_adapter *adapter = netdev_priv(netdev);
3478         struct e1000_hw *hw = &adapter->hw;
3479         uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
3480 #ifndef CONFIG_E1000_NAPI
3481         int i;
3482 #else
3483         /* Interrupt Auto-Mask...upon reading ICR,
3484          * interrupts are masked.  No need for the
3485          * IMC write, but it does mean we should
3486          * account for it ASAP. */
3487         if (likely(hw->mac_type >= e1000_82571))
3488                 atomic_inc(&adapter->irq_sem);
3489 #endif
3490
3491         if (unlikely(!icr)) {
3492 #ifdef CONFIG_E1000_NAPI
3493                 if (hw->mac_type >= e1000_82571)
3494                         e1000_irq_enable(adapter);
3495 #endif
3496                 return IRQ_NONE;  /* Not our interrupt */
3497         }
3498
3499         if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
3500                 hw->get_link_status = 1;
3501                 /* 80003ES2LAN workaround--
3502                  * For packet buffer work-around on link down event;
3503                  * disable receives here in the ISR and
3504                  * reset adapter in watchdog
3505                  */
3506                 if (netif_carrier_ok(netdev) &&
3507                     (adapter->hw.mac_type == e1000_80003es2lan)) {
3508                         /* disable receives */
3509                         rctl = E1000_READ_REG(hw, RCTL);
3510                         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
3511                 }
3512                 /* guard against interrupt when we're going down */
3513                 if (!test_bit(__E1000_DOWN, &adapter->flags))
3514                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
3515         }
3516
3517 #ifdef CONFIG_E1000_NAPI
3518         if (unlikely(hw->mac_type < e1000_82571)) {
3519                 atomic_inc(&adapter->irq_sem);
3520                 E1000_WRITE_REG(hw, IMC, ~0);
3521                 E1000_WRITE_FLUSH(hw);
3522         }
3523         if (likely(netif_rx_schedule_prep(netdev)))
3524                 __netif_rx_schedule(netdev);
3525         else
3526                 /* this really should not happen! if it does it is basically a
3527                  * bug, but not a hard error, so enable ints and continue */
3528                 e1000_irq_enable(adapter);
3529 #else
3530         /* Writing IMC and IMS is needed for 82547.
3531          * Due to Hub Link bus being occupied, an interrupt
3532          * de-assertion message is not able to be sent.
3533          * When an interrupt assertion message is generated later,
3534          * two messages are re-ordered and sent out.
3535          * That causes APIC to think 82547 is in de-assertion
3536          * state, while 82547 is in assertion state, resulting
3537          * in dead lock. Writing IMC forces 82547 into
3538          * de-assertion state.
3539          */
3540         if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) {
3541                 atomic_inc(&adapter->irq_sem);
3542                 E1000_WRITE_REG(hw, IMC, ~0);
3543         }
3544
3545         for (i = 0; i < E1000_MAX_INTR; i++)
3546                 if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
3547                    !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
3548                         break;
3549
3550         if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
3551                 e1000_irq_enable(adapter);
3552
3553 #endif
3554         return IRQ_HANDLED;
3555 }
3556
3557 #ifdef CONFIG_E1000_NAPI
3558 /**
3559  * e1000_clean - NAPI Rx polling callback
3560  * @adapter: board private structure
3561  **/
3562
3563 static int
3564 e1000_clean(struct net_device *poll_dev, int *budget)
3565 {
3566         struct e1000_adapter *adapter;
3567         int work_to_do = min(*budget, poll_dev->quota);
3568         int tx_cleaned = 0, work_done = 0;
3569
3570         /* Must NOT use netdev_priv macro here. */
3571         adapter = poll_dev->priv;
3572
3573         /* Keep link state information with original netdev */
3574         if (!netif_carrier_ok(poll_dev))
3575                 goto quit_polling;
3576
3577         /* e1000_clean is called per-cpu.  This lock protects
3578          * tx_ring[0] from being cleaned by multiple cpus
3579          * simultaneously.  A failure obtaining the lock means
3580          * tx_ring[0] is currently being cleaned anyway. */
3581         if (spin_trylock(&adapter->tx_queue_lock)) {
3582                 tx_cleaned = e1000_clean_tx_irq(adapter,
3583                                                 &adapter->tx_ring[0]);
3584                 spin_unlock(&adapter->tx_queue_lock);
3585         }
3586
3587         adapter->clean_rx(adapter, &adapter->rx_ring[0],
3588                           &work_done, work_to_do);
3589
3590         *budget -= work_done;
3591         poll_dev->quota -= work_done;
3592
3593         /* If no Tx and not enough Rx work done, exit the polling mode */
3594         if ((!tx_cleaned && (work_done == 0)) ||
3595            !netif_running(poll_dev)) {
3596 quit_polling:
3597                 netif_rx_complete(poll_dev);
3598                 e1000_irq_enable(adapter);
3599                 return 0;
3600         }
3601
3602         return 1;
3603 }
3604
3605 #endif
3606 /**
3607  * e1000_clean_tx_irq - Reclaim resources after transmit completes
3608  * @adapter: board private structure
3609  **/
3610
3611 static boolean_t
3612 e1000_clean_tx_irq(struct e1000_adapter *adapter,
3613                    struct e1000_tx_ring *tx_ring)
3614 {
3615         struct net_device *netdev = adapter->netdev;
3616         struct e1000_tx_desc *tx_desc, *eop_desc;
3617         struct e1000_buffer *buffer_info;
3618         unsigned int i, eop;
3619 #ifdef CONFIG_E1000_NAPI
3620         unsigned int count = 0;
3621 #endif
3622         boolean_t cleaned = FALSE;
3623
3624         i = tx_ring->next_to_clean;
3625         eop = tx_ring->buffer_info[i].next_to_watch;
3626         eop_desc = E1000_TX_DESC(*tx_ring, eop);
3627
3628         while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
3629                 for (cleaned = FALSE; !cleaned; ) {
3630                         tx_desc = E1000_TX_DESC(*tx_ring, i);
3631                         buffer_info = &tx_ring->buffer_info[i];
3632                         cleaned = (i == eop);
3633
3634                         e1000_unmap_and_free_tx_resource(adapter, buffer_info);
3635                         tx_desc->upper.data = 0;
3636
3637                         if (unlikely(++i == tx_ring->count)) i = 0;
3638                 }
3639
3640                 eop = tx_ring->buffer_info[i].next_to_watch;
3641                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3642 #ifdef CONFIG_E1000_NAPI
3643 #define E1000_TX_WEIGHT 64
3644                 /* weight of a sort for tx, to avoid endless transmit cleanup */
3645                 if (count++ == E1000_TX_WEIGHT) break;
3646 #endif
3647         }
3648
3649         tx_ring->next_to_clean = i;
3650
3651 #define TX_WAKE_THRESHOLD 32
3652         if (unlikely(cleaned && netif_carrier_ok(netdev) &&
3653                      E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
3654                 /* Make sure that anybody stopping the queue after this
3655                  * sees the new next_to_clean.
3656                  */
3657                 smp_mb();
3658                 if (netif_queue_stopped(netdev)) {
3659                         netif_wake_queue(netdev);
3660                         ++adapter->restart_queue;
3661                 }
3662         }
3663
3664         if (adapter->detect_tx_hung) {
3665                 /* Detect a transmit hang in hardware, this serializes the
3666                  * check with the clearing of time_stamp and movement of i */
3667                 adapter->detect_tx_hung = FALSE;
3668                 if (tx_ring->buffer_info[eop].dma &&
3669                     time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
3670                                (adapter->tx_timeout_factor * HZ))
3671                     && !(E1000_READ_REG(&adapter->hw, STATUS) &
3672                          E1000_STATUS_TXOFF)) {
3673
3674                         /* detected Tx unit hang */
3675                         DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
3676                                         "  Tx Queue             <%lu>\n"
3677                                         "  TDH                  <%x>\n"
3678                                         "  TDT                  <%x>\n"
3679                                         "  next_to_use          <%x>\n"
3680                                         "  next_to_clean        <%x>\n"
3681                                         "buffer_info[next_to_clean]\n"
3682                                         "  time_stamp           <%lx>\n"
3683                                         "  next_to_watch        <%x>\n"
3684                                         "  jiffies              <%lx>\n"
3685                                         "  next_to_watch.status <%x>\n",
3686                                 (unsigned long)((tx_ring - adapter->tx_ring) /
3687                                         sizeof(struct e1000_tx_ring)),
3688                                 readl(adapter->hw.hw_addr + tx_ring->tdh),
3689                                 readl(adapter->hw.hw_addr + tx_ring->tdt),
3690                                 tx_ring->next_to_use,
3691                                 tx_ring->next_to_clean,
3692                                 tx_ring->buffer_info[eop].time_stamp,
3693                                 eop,
3694                                 jiffies,
3695                                 eop_desc->upper.fields.status);
3696                         netif_stop_queue(netdev);
3697                 }
3698         }
3699         return cleaned;
3700 }
3701
3702 /**
3703  * e1000_rx_checksum - Receive Checksum Offload for 82543
3704  * @adapter:     board private structure
3705  * @status_err:  receive descriptor status and error fields
3706  * @csum:        receive descriptor csum field
3707  * @sk_buff:     socket buffer with received data
3708  **/
3709
3710 static void
3711 e1000_rx_checksum(struct e1000_adapter *adapter,
3712                   uint32_t status_err, uint32_t csum,
3713                   struct sk_buff *skb)
3714 {
3715         uint16_t status = (uint16_t)status_err;
3716         uint8_t errors = (uint8_t)(status_err >> 24);
3717         skb->ip_summed = CHECKSUM_NONE;
3718
3719         /* 82543 or newer only */
3720         if (unlikely(adapter->hw.mac_type < e1000_82543)) return;
3721         /* Ignore Checksum bit is set */
3722         if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
3723         /* TCP/UDP checksum error bit is set */
3724         if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
3725                 /* let the stack verify checksum errors */
3726                 adapter->hw_csum_err++;
3727                 return;
3728         }
3729         /* TCP/UDP Checksum has not been calculated */
3730         if (adapter->hw.mac_type <= e1000_82547_rev_2) {
3731                 if (!(status & E1000_RXD_STAT_TCPCS))
3732                         return;
3733         } else {
3734                 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
3735                         return;
3736         }
3737         /* It must be a TCP or UDP packet with a valid checksum */
3738         if (likely(status & E1000_RXD_STAT_TCPCS)) {
3739                 /* TCP checksum is good */
3740                 skb->ip_summed = CHECKSUM_UNNECESSARY;
3741         } else if (adapter->hw.mac_type > e1000_82547_rev_2) {
3742                 /* IP fragment with UDP payload */
3743                 /* Hardware complements the payload checksum, so we undo it
3744                  * and then put the value in host order for further stack use.
3745                  */
3746                 csum = ntohl(csum ^ 0xFFFF);
3747                 skb->csum = csum;
3748                 skb->ip_summed = CHECKSUM_COMPLETE;
3749         }
3750         adapter->hw_csum_good++;
3751 }
3752
3753 /**
3754  * e1000_clean_rx_irq - Send received data up the network stack; legacy
3755  * @adapter: board private structure
3756  **/
3757
3758 static boolean_t
3759 #ifdef CONFIG_E1000_NAPI
3760 e1000_clean_rx_irq(struct e1000_adapter *adapter,
3761                    struct e1000_rx_ring *rx_ring,
3762                    int *work_done, int work_to_do)
3763 #else
3764 e1000_clean_rx_irq(struct e1000_adapter *adapter,
3765                    struct e1000_rx_ring *rx_ring)
3766 #endif
3767 {
3768         struct net_device *netdev = adapter->netdev;
3769         struct pci_dev *pdev = adapter->pdev;
3770         struct e1000_rx_desc *rx_desc, *next_rxd;
3771         struct e1000_buffer *buffer_info, *next_buffer;
3772         unsigned long flags;
3773         uint32_t length;
3774         uint8_t last_byte;
3775         unsigned int i;
3776         int cleaned_count = 0;
3777         boolean_t cleaned = FALSE;
3778
3779         i = rx_ring->next_to_clean;
3780         rx_desc = E1000_RX_DESC(*rx_ring, i);
3781         buffer_info = &rx_ring->buffer_info[i];
3782
3783         while (rx_desc->status & E1000_RXD_STAT_DD) {
3784                 struct sk_buff *skb;
3785                 u8 status;
3786
3787 #ifdef CONFIG_E1000_NAPI
3788                 if (*work_done >= work_to_do)
3789                         break;
3790                 (*work_done)++;
3791 #endif
3792                 status = rx_desc->status;
3793                 skb = buffer_info->skb;
3794                 buffer_info->skb = NULL;
3795
3796                 prefetch(skb->data - NET_IP_ALIGN);
3797
3798                 if (++i == rx_ring->count) i = 0;
3799                 next_rxd = E1000_RX_DESC(*rx_ring, i);
3800                 prefetch(next_rxd);
3801
3802                 next_buffer = &rx_ring->buffer_info[i];
3803
3804                 cleaned = TRUE;
3805                 cleaned_count++;
3806                 pci_unmap_single(pdev,
3807                                  buffer_info->dma,
3808                                  buffer_info->length,
3809                                  PCI_DMA_FROMDEVICE);
3810
3811                 length = le16_to_cpu(rx_desc->length);
3812
3813                 if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
3814                         /* All receives must fit into a single buffer */
3815                         E1000_DBG("%s: Receive packet consumed multiple"
3816                                   " buffers\n", netdev->name);
3817                         /* recycle */
3818                         buffer_info->skb = skb;
3819                         goto next_desc;
3820                 }
3821
3822                 if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
3823                         last_byte = *(skb->data + length - 1);
3824                         if (TBI_ACCEPT(&adapter->hw, status,
3825                                       rx_desc->errors, length, last_byte)) {
3826                                 spin_lock_irqsave(&adapter->stats_lock, flags);
3827                                 e1000_tbi_adjust_stats(&adapter->hw,
3828                                                        &adapter->stats,
3829                                                        length, skb->data);
3830                                 spin_unlock_irqrestore(&adapter->stats_lock,
3831                                                        flags);
3832                                 length--;
3833                         } else {
3834                                 /* recycle */
3835                                 buffer_info->skb = skb;
3836                                 goto next_desc;
3837                         }
3838                 }
3839
3840                 /* adjust length to remove Ethernet CRC, this must be
3841                  * done after the TBI_ACCEPT workaround above */
3842                 length -= 4;
3843
3844                 /* code added for copybreak, this should improve
3845                  * performance for small packets with large amounts
3846                  * of reassembly being done in the stack */
3847 #define E1000_CB_LENGTH 256
3848                 if (length < E1000_CB_LENGTH) {
3849                         struct sk_buff *new_skb =
3850                             netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
3851                         if (new_skb) {
3852                                 skb_reserve(new_skb, NET_IP_ALIGN);
3853                                 memcpy(new_skb->data - NET_IP_ALIGN,
3854                                        skb->data - NET_IP_ALIGN,
3855                                        length + NET_IP_ALIGN);
3856                                 /* save the skb in buffer_info as good */
3857                                 buffer_info->skb = skb;
3858                                 skb = new_skb;
3859                         }
3860                         /* else just continue with the old one */
3861                 }
3862                 /* end copybreak code */
3863                 skb_put(skb, length);
3864
3865                 /* Receive Checksum Offload */
3866                 e1000_rx_checksum(adapter,
3867                                   (uint32_t)(status) |
3868                                   ((uint32_t)(rx_desc->errors) << 24),
3869                                   le16_to_cpu(rx_desc->csum), skb);
3870
3871                 skb->protocol = eth_type_trans(skb, netdev);
3872 #ifdef CONFIG_E1000_NAPI
3873                 if (unlikely(adapter->vlgrp &&
3874                             (status & E1000_RXD_STAT_VP))) {
3875                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
3876                                                  le16_to_cpu(rx_desc->special) &
3877                                                  E1000_RXD_SPC_VLAN_MASK);
3878                 } else {
3879                         netif_receive_skb(skb);
3880                 }
3881 #else /* CONFIG_E1000_NAPI */
3882                 if (unlikely(adapter->vlgrp &&
3883                             (status & E1000_RXD_STAT_VP))) {
3884                         vlan_hwaccel_rx(skb, adapter->vlgrp,
3885                                         le16_to_cpu(rx_desc->special) &
3886                                         E1000_RXD_SPC_VLAN_MASK);
3887                 } else {
3888                         netif_rx(skb);
3889                 }
3890 #endif /* CONFIG_E1000_NAPI */
3891                 netdev->last_rx = jiffies;
3892
3893 next_desc:
3894                 rx_desc->status = 0;
3895
3896                 /* return some buffers to hardware, one at a time is too slow */
3897                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
3898                         adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
3899                         cleaned_count = 0;
3900                 }
3901
3902                 /* use prefetched values */
3903                 rx_desc = next_rxd;
3904                 buffer_info = next_buffer;
3905         }
3906         rx_ring->next_to_clean = i;
3907
3908         cleaned_count = E1000_DESC_UNUSED(rx_ring);
3909         if (cleaned_count)
3910                 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
3911
3912         return cleaned;
3913 }
3914
3915 /**
3916  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
3917  * @adapter: board private structure
3918  **/
3919
3920 static boolean_t
3921 #ifdef CONFIG_E1000_NAPI
3922 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
3923                       struct e1000_rx_ring *rx_ring,
3924                       int *work_done, int work_to_do)
3925 #else
3926 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
3927                       struct e1000_rx_ring *rx_ring)
3928 #endif
3929 {
3930         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
3931         struct net_device *netdev = adapter->netdev;
3932         struct pci_dev *pdev = adapter->pdev;
3933         struct e1000_buffer *buffer_info, *next_buffer;
3934         struct e1000_ps_page *ps_page;
3935         struct e1000_ps_page_dma *ps_page_dma;
3936         struct sk_buff *skb;
3937         unsigned int i, j;
3938         uint32_t length, staterr;
3939         int cleaned_count = 0;
3940         boolean_t cleaned = FALSE;
3941
3942         i = rx_ring->next_to_clean;
3943         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
3944         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
3945         buffer_info = &rx_ring->buffer_info[i];
3946
3947         while (staterr & E1000_RXD_STAT_DD) {
3948                 ps_page = &rx_ring->ps_page[i];
3949                 ps_page_dma = &rx_ring->ps_page_dma[i];
3950 #ifdef CONFIG_E1000_NAPI
3951                 if (unlikely(*work_done >= work_to_do))
3952                         break;
3953                 (*work_done)++;
3954 #endif
3955                 skb = buffer_info->skb;
3956
3957                 /* in the packet split case this is header only */
3958                 prefetch(skb->data - NET_IP_ALIGN);
3959
3960                 if (++i == rx_ring->count) i = 0;
3961                 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
3962                 prefetch(next_rxd);
3963
3964                 next_buffer = &rx_ring->buffer_info[i];
3965
3966                 cleaned = TRUE;
3967                 cleaned_count++;
3968                 pci_unmap_single(pdev, buffer_info->dma,
3969                                  buffer_info->length,
3970                                  PCI_DMA_FROMDEVICE);
3971
3972                 if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
3973                         E1000_DBG("%s: Packet Split buffers didn't pick up"
3974                                   " the full packet\n", netdev->name);
3975                         dev_kfree_skb_irq(skb);
3976                         goto next_desc;
3977                 }
3978
3979                 if (unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
3980                         dev_kfree_skb_irq(skb);
3981                         goto next_desc;
3982                 }
3983
3984                 length = le16_to_cpu(rx_desc->wb.middle.length0);
3985
3986                 if (unlikely(!length)) {
3987                         E1000_DBG("%s: Last part of the packet spanning"
3988                                   " multiple descriptors\n", netdev->name);
3989                         dev_kfree_skb_irq(skb);
3990                         goto next_desc;
3991                 }
3992
3993                 /* Good Receive */
3994                 skb_put(skb, length);
3995
3996                 {
3997                 /* this looks ugly, but it seems compiler issues make it
3998                    more efficient than reusing j */
3999                 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
4000
4001                 /* page alloc/put takes too long and effects small packet
4002                  * throughput, so unsplit small packets and save the alloc/put*/
4003                 if (l1 && ((length + l1) <= adapter->rx_ps_bsize0)) {
4004                         u8 *vaddr;
4005                         /* there is no documentation about how to call
4006                          * kmap_atomic, so we can't hold the mapping
4007                          * very long */
4008                         pci_dma_sync_single_for_cpu(pdev,
4009                                 ps_page_dma->ps_page_dma[0],
4010                                 PAGE_SIZE,
4011                                 PCI_DMA_FROMDEVICE);
4012                         vaddr = kmap_atomic(ps_page->ps_page[0],
4013                                             KM_SKB_DATA_SOFTIRQ);
4014                         memcpy(skb->tail, vaddr, l1);
4015                         kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
4016                         pci_dma_sync_single_for_device(pdev,
4017                                 ps_page_dma->ps_page_dma[0],
4018                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
4019                         /* remove the CRC */
4020                         l1 -= 4;
4021                         skb_put(skb, l1);
4022                         goto copydone;
4023                 } /* if */
4024                 }
4025
4026                 for (j = 0; j < adapter->rx_ps_pages; j++) {
4027                         if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
4028                                 break;
4029                         pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
4030                                         PAGE_SIZE, PCI_DMA_FROMDEVICE);
4031                         ps_page_dma->ps_page_dma[j] = 0;
4032                         skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
4033                                            length);
4034                         ps_page->ps_page[j] = NULL;
4035                         skb->len += length;
4036                         skb->data_len += length;
4037                         skb->truesize += length;
4038                 }
4039
4040                 /* strip the ethernet crc, problem is we're using pages now so
4041                  * this whole operation can get a little cpu intensive */
4042                 pskb_trim(skb, skb->len - 4);
4043
4044 copydone:
4045                 e1000_rx_checksum(adapter, staterr,
4046                                   le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
4047                 skb->protocol = eth_type_trans(skb, netdev);
4048
4049                 if (likely(rx_desc->wb.upper.header_status &
4050                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
4051                         adapter->rx_hdr_split++;
4052 #ifdef CONFIG_E1000_NAPI
4053                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
4054                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
4055                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
4056                                 E1000_RXD_SPC_VLAN_MASK);
4057                 } else {
4058                         netif_receive_skb(skb);
4059                 }
4060 #else /* CONFIG_E1000_NAPI */
4061                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
4062                         vlan_hwaccel_rx(skb, adapter->vlgrp,
4063                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
4064                                 E1000_RXD_SPC_VLAN_MASK);
4065                 } else {
4066                         netif_rx(skb);
4067                 }
4068 #endif /* CONFIG_E1000_NAPI */
4069                 netdev->last_rx = jiffies;
4070
4071 next_desc:
4072                 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
4073                 buffer_info->skb = NULL;
4074
4075                 /* return some buffers to hardware, one at a time is too slow */
4076                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4077                         adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4078                         cleaned_count = 0;
4079                 }
4080
4081                 /* use prefetched values */
4082                 rx_desc = next_rxd;
4083                 buffer_info = next_buffer;
4084
4085                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
4086         }
4087         rx_ring->next_to_clean = i;
4088
4089         cleaned_count = E1000_DESC_UNUSED(rx_ring);
4090         if (cleaned_count)
4091                 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4092
4093         return cleaned;
4094 }
4095
4096 /**
4097  * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4098  * @adapter: address of board private structure
4099  **/
4100
4101 static void
4102 e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
4103                        struct e1000_rx_ring *rx_ring,
4104                        int cleaned_count)
4105 {
4106         struct net_device *netdev = adapter->netdev;
4107         struct pci_dev *pdev = adapter->pdev;
4108         struct e1000_rx_desc *rx_desc;
4109         struct e1000_buffer *buffer_info;
4110         struct sk_buff *skb;
4111         unsigned int i;
4112         unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
4113
4114         i = rx_ring->next_to_use;
4115         buffer_info = &rx_ring->buffer_info[i];
4116
4117         while (cleaned_count--) {
4118                 skb = buffer_info->skb;
4119                 if (skb) {
4120                         skb_trim(skb, 0);
4121                         goto map_skb;
4122                 }
4123
4124                 skb = netdev_alloc_skb(netdev, bufsz);
4125                 if (unlikely(!skb)) {
4126                         /* Better luck next round */
4127                         adapter->alloc_rx_buff_failed++;
4128                         break;
4129                 }
4130
4131                 /* Fix for errata 23, can't cross 64kB boundary */
4132                 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4133                         struct sk_buff *oldskb = skb;
4134                         DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
4135                                              "at %p\n", bufsz, skb->data);
4136                         /* Try again, without freeing the previous */
4137                         skb = netdev_alloc_skb(netdev, bufsz);
4138                         /* Failed allocation, critical failure */
4139                         if (!skb) {
4140                                 dev_kfree_skb(oldskb);
4141                                 break;
4142                         }
4143
4144                         if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4145                                 /* give up */
4146                                 dev_kfree_skb(skb);
4147                                 dev_kfree_skb(oldskb);
4148                                 break; /* while !buffer_info->skb */
4149                         }
4150
4151                         /* Use new allocation */
4152                         dev_kfree_skb(oldskb);
4153                 }
4154                 /* Make buffer alignment 2 beyond a 16 byte boundary
4155                  * this will result in a 16 byte aligned IP header after
4156                  * the 14 byte MAC header is removed
4157                  */
4158                 skb_reserve(skb, NET_IP_ALIGN);
4159
4160                 buffer_info->skb = skb;
4161                 buffer_info->length = adapter->rx_buffer_len;
4162 map_skb:
4163                 buffer_info->dma = pci_map_single(pdev,
4164                                                   skb->data,
4165                                                   adapter->rx_buffer_len,
4166                                                   PCI_DMA_FROMDEVICE);
4167
4168                 /* Fix for errata 23, can't cross 64kB boundary */
4169                 if (!e1000_check_64k_bound(adapter,
4170                                         (void *)(unsigned long)buffer_info->dma,
4171                                         adapter->rx_buffer_len)) {
4172                         DPRINTK(RX_ERR, ERR,
4173                                 "dma align check failed: %u bytes at %p\n",
4174                                 adapter->rx_buffer_len,
4175                                 (void *)(unsigned long)buffer_info->dma);
4176                         dev_kfree_skb(skb);
4177                         buffer_info->skb = NULL;
4178
4179                         pci_unmap_single(pdev, buffer_info->dma,
4180                                          adapter->rx_buffer_len,
4181                                          PCI_DMA_FROMDEVICE);
4182
4183                         break; /* while !buffer_info->skb */
4184                 }
4185                 rx_desc = E1000_RX_DESC(*rx_ring, i);
4186                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4187
4188                 if (unlikely(++i == rx_ring->count))
4189                         i = 0;
4190                 buffer_info = &rx_ring->buffer_info[i];
4191         }
4192
4193         if (likely(rx_ring->next_to_use != i)) {
4194                 rx_ring->next_to_use = i;
4195                 if (unlikely(i-- == 0))
4196                         i = (rx_ring->count - 1);
4197
4198                 /* Force memory writes to complete before letting h/w
4199                  * know there are new descriptors to fetch.  (Only
4200                  * applicable for weak-ordered memory model archs,
4201                  * such as IA-64). */
4202                 wmb();
4203                 writel(i, adapter->hw.hw_addr + rx_ring->rdt);
4204         }
4205 }
4206
4207 /**
4208  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
4209  * @adapter: address of board private structure
4210  **/
4211
4212 static void
4213 e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
4214                           struct e1000_rx_ring *rx_ring,
4215                           int cleaned_count)
4216 {
4217         struct net_device *netdev = adapter->netdev;
4218         struct pci_dev *pdev = adapter->pdev;
4219         union e1000_rx_desc_packet_split *rx_desc;
4220         struct e1000_buffer *buffer_info;
4221         struct e1000_ps_page *ps_page;
4222         struct e1000_ps_page_dma *ps_page_dma;
4223         struct sk_buff *skb;
4224         unsigned int i, j;
4225
4226         i = rx_ring->next_to_use;
4227         buffer_info = &rx_ring->buffer_info[i];
4228         ps_page = &rx_ring->ps_page[i];
4229         ps_page_dma = &rx_ring->ps_page_dma[i];
4230
4231         while (cleaned_count--) {
4232                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
4233
4234                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
4235                         if (j < adapter->rx_ps_pages) {
4236                                 if (likely(!ps_page->ps_page[j])) {
4237                                         ps_page->ps_page[j] =
4238                                                 alloc_page(GFP_ATOMIC);
4239                                         if (unlikely(!ps_page->ps_page[j])) {
4240                                                 adapter->alloc_rx_buff_failed++;
4241                                                 goto no_buffers;
4242                                         }
4243                                         ps_page_dma->ps_page_dma[j] =
4244                                                 pci_map_page(pdev,
4245                                                             ps_page->ps_page[j],
4246                                                             0, PAGE_SIZE,
4247                                                             PCI_DMA_FROMDEVICE);
4248                                 }
4249                                 /* Refresh the desc even if buffer_addrs didn't
4250                                  * change because each write-back erases
4251                                  * this info.
4252                                  */
4253                                 rx_desc->read.buffer_addr[j+1] =
4254                                      cpu_to_le64(ps_page_dma->ps_page_dma[j]);
4255                         } else
4256                                 rx_desc->read.buffer_addr[j+1] = ~0;
4257                 }
4258
4259                 skb = netdev_alloc_skb(netdev,
4260                                        adapter->rx_ps_bsize0 + NET_IP_ALIGN);
4261
4262                 if (unlikely(!skb)) {
4263                         adapter->alloc_rx_buff_failed++;
4264                         break;
4265                 }
4266
4267                 /* Make buffer alignment 2 beyond a 16 byte boundary
4268                  * this will result in a 16 byte aligned IP header after
4269                  * the 14 byte MAC header is removed
4270                  */
4271                 skb_reserve(skb, NET_IP_ALIGN);
4272
4273                 buffer_info->skb = skb;
4274                 buffer_info->length = adapter->rx_ps_bsize0;
4275                 buffer_info->dma = pci_map_single(pdev, skb->data,
4276                                                   adapter->rx_ps_bsize0,
4277                                                   PCI_DMA_FROMDEVICE);
4278
4279                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
4280
4281                 if (unlikely(++i == rx_ring->count)) i = 0;
4282                 buffer_info = &rx_ring->buffer_info[i];
4283                 ps_page = &rx_ring->ps_page[i];
4284                 ps_page_dma = &rx_ring->ps_page_dma[i];
4285         }
4286
4287 no_buffers:
4288         if (likely(rx_ring->next_to_use != i)) {
4289                 rx_ring->next_to_use = i;
4290                 if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
4291
4292                 /* Force memory writes to complete before letting h/w
4293                  * know there are new descriptors to fetch.  (Only
4294                  * applicable for weak-ordered memory model archs,
4295                  * such as IA-64). */
4296                 wmb();
4297                 /* Hardware increments by 16 bytes, but packet split
4298                  * descriptors are 32 bytes...so we increment tail
4299                  * twice as much.
4300                  */
4301                 writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
4302         }
4303 }
4304
4305 /**
4306  * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4307  * @adapter:
4308  **/
4309
4310 static void
4311 e1000_smartspeed(struct e1000_adapter *adapter)
4312 {
4313         uint16_t phy_status;
4314         uint16_t phy_ctrl;
4315
4316         if ((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
4317            !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
4318                 return;
4319
4320         if (adapter->smartspeed == 0) {
4321                 /* If Master/Slave config fault is asserted twice,
4322                  * we assume back-to-back */
4323                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
4324                 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4325                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
4326                 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4327                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
4328                 if (phy_ctrl & CR_1000T_MS_ENABLE) {
4329                         phy_ctrl &= ~CR_1000T_MS_ENABLE;
4330                         e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
4331                                             phy_ctrl);
4332                         adapter->smartspeed++;
4333                         if (!e1000_phy_setup_autoneg(&adapter->hw) &&
4334                            !e1000_read_phy_reg(&adapter->hw, PHY_CTRL,
4335                                                &phy_ctrl)) {
4336                                 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4337                                              MII_CR_RESTART_AUTO_NEG);
4338                                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL,
4339                                                     phy_ctrl);
4340                         }
4341                 }
4342                 return;
4343         } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
4344                 /* If still no link, perhaps using 2/3 pair cable */
4345                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
4346                 phy_ctrl |= CR_1000T_MS_ENABLE;
4347                 e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
4348                 if (!e1000_phy_setup_autoneg(&adapter->hw) &&
4349                    !e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
4350                         phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4351                                      MII_CR_RESTART_AUTO_NEG);
4352                         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
4353                 }
4354         }
4355         /* Restart process after E1000_SMARTSPEED_MAX iterations */
4356         if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
4357                 adapter->smartspeed = 0;
4358 }
4359
4360 /**
4361  * e1000_ioctl -
4362  * @netdev:
4363  * @ifreq:
4364  * @cmd:
4365  **/
4366
4367 static int
4368 e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4369 {
4370         switch (cmd) {
4371         case SIOCGMIIPHY:
4372         case SIOCGMIIREG:
4373         case SIOCSMIIREG:
4374                 return e1000_mii_ioctl(netdev, ifr, cmd);
4375         default:
4376                 return -EOPNOTSUPP;
4377         }
4378 }
4379
4380 /**
4381  * e1000_mii_ioctl -
4382  * @netdev:
4383  * @ifreq:
4384  * @cmd:
4385  **/
4386
4387 static int
4388 e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4389 {
4390         struct e1000_adapter *adapter = netdev_priv(netdev);
4391         struct mii_ioctl_data *data = if_mii(ifr);
4392         int retval;
4393         uint16_t mii_reg;
4394         uint16_t spddplx;
4395         unsigned long flags;
4396
4397         if (adapter->hw.media_type != e1000_media_type_copper)
4398                 return -EOPNOTSUPP;
4399
4400         switch (cmd) {
4401         case SIOCGMIIPHY:
4402                 data->phy_id = adapter->hw.phy_addr;
4403                 break;
4404         case SIOCGMIIREG:
4405                 if (!capable(CAP_NET_ADMIN))
4406                         return -EPERM;
4407                 spin_lock_irqsave(&adapter->stats_lock, flags);
4408                 if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
4409                                    &data->val_out)) {
4410                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
4411                         return -EIO;
4412                 }
4413                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4414                 break;
4415         case SIOCSMIIREG:
4416                 if (!capable(CAP_NET_ADMIN))
4417                         return -EPERM;
4418                 if (data->reg_num & ~(0x1F))
4419                         return -EFAULT;
4420                 mii_reg = data->val_in;
4421                 spin_lock_irqsave(&adapter->stats_lock, flags);
4422                 if (e1000_write_phy_reg(&adapter->hw, data->reg_num,
4423                                         mii_reg)) {
4424                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
4425                         return -EIO;
4426                 }
4427                 if (adapter->hw.media_type == e1000_media_type_copper) {
4428                         switch (data->reg_num) {
4429                         case PHY_CTRL:
4430                                 if (mii_reg & MII_CR_POWER_DOWN)
4431                                         break;
4432                                 if (mii_reg & MII_CR_AUTO_NEG_EN) {
4433                                         adapter->hw.autoneg = 1;
4434                                         adapter->hw.autoneg_advertised = 0x2F;
4435                                 } else {
4436                                         if (mii_reg & 0x40)
4437                                                 spddplx = SPEED_1000;
4438                                         else if (mii_reg & 0x2000)
4439                                                 spddplx = SPEED_100;
4440                                         else
4441                                                 spddplx = SPEED_10;
4442                                         spddplx += (mii_reg & 0x100)
4443                                                    ? DUPLEX_FULL :
4444                                                    DUPLEX_HALF;
4445                                         retval = e1000_set_spd_dplx(adapter,
4446                                                                     spddplx);
4447                                         if (retval) {
4448                                                 spin_unlock_irqrestore(
4449                                                         &adapter->stats_lock,
4450                                                         flags);
4451                                                 return retval;
4452                                         }
4453                                 }
4454                                 if (netif_running(adapter->netdev))
4455                                         e1000_reinit_locked(adapter);
4456                                 else
4457                                         e1000_reset(adapter);
4458                                 break;
4459                         case M88E1000_PHY_SPEC_CTRL:
4460                         case M88E1000_EXT_PHY_SPEC_CTRL:
4461                                 if (e1000_phy_reset(&adapter->hw)) {
4462                                         spin_unlock_irqrestore(
4463                                                 &adapter->stats_lock, flags);
4464                                         return -EIO;
4465                                 }
4466                                 break;
4467                         }
4468                 } else {
4469                         switch (data->reg_num) {
4470                         case PHY_CTRL:
4471                                 if (mii_reg & MII_CR_POWER_DOWN)
4472                                         break;
4473                                 if (netif_running(adapter->netdev))
4474                                         e1000_reinit_locked(adapter);
4475                                 else
4476                                         e1000_reset(adapter);
4477                                 break;
4478                         }
4479                 }
4480                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4481                 break;
4482         default:
4483                 return -EOPNOTSUPP;
4484         }
4485         return E1000_SUCCESS;
4486 }
4487
4488 void
4489 e1000_pci_set_mwi(struct e1000_hw *hw)
4490 {
4491         struct e1000_adapter *adapter = hw->back;
4492         int ret_val = pci_set_mwi(adapter->pdev);
4493
4494         if (ret_val)
4495                 DPRINTK(PROBE, ERR, "Error in setting MWI\n");
4496 }
4497
4498 void
4499 e1000_pci_clear_mwi(struct e1000_hw *hw)
4500 {
4501         struct e1000_adapter *adapter = hw->back;
4502
4503         pci_clear_mwi(adapter->pdev);
4504 }
4505
4506 void
4507 e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4508 {
4509         struct e1000_adapter *adapter = hw->back;
4510
4511         pci_read_config_word(adapter->pdev, reg, value);
4512 }
4513
4514 void
4515 e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4516 {
4517         struct e1000_adapter *adapter = hw->back;
4518
4519         pci_write_config_word(adapter->pdev, reg, *value);
4520 }
4521
4522 int32_t
4523 e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4524 {
4525     struct e1000_adapter *adapter = hw->back;
4526     uint16_t cap_offset;
4527
4528     cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
4529     if (!cap_offset)
4530         return -E1000_ERR_CONFIG;
4531
4532     pci_read_config_word(adapter->pdev, cap_offset + reg, value);
4533
4534     return E1000_SUCCESS;
4535 }
4536
4537 void
4538 e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
4539 {
4540         outl(value, port);
4541 }
4542
4543 static void
4544 e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
4545 {
4546         struct e1000_adapter *adapter = netdev_priv(netdev);
4547         uint32_t ctrl, rctl;
4548
4549         e1000_irq_disable(adapter);
4550         adapter->vlgrp = grp;
4551
4552         if (grp) {
4553                 /* enable VLAN tag insert/strip */
4554                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4555                 ctrl |= E1000_CTRL_VME;
4556                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4557
4558                 if (adapter->hw.mac_type != e1000_ich8lan) {
4559                         /* enable VLAN receive filtering */
4560                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4561                         rctl |= E1000_RCTL_VFE;
4562                         rctl &= ~E1000_RCTL_CFIEN;
4563                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4564                         e1000_update_mng_vlan(adapter);
4565                 }
4566         } else {
4567                 /* disable VLAN tag insert/strip */
4568                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4569                 ctrl &= ~E1000_CTRL_VME;
4570                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4571
4572                 if (adapter->hw.mac_type != e1000_ich8lan) {
4573                         /* disable VLAN filtering */
4574                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4575                         rctl &= ~E1000_RCTL_VFE;
4576                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4577                         if (adapter->mng_vlan_id !=
4578                             (uint16_t)E1000_MNG_VLAN_NONE) {
4579                                 e1000_vlan_rx_kill_vid(netdev,
4580                                                        adapter->mng_vlan_id);
4581                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4582                         }
4583                 }
4584         }
4585
4586         e1000_irq_enable(adapter);
4587 }
4588
4589 static void
4590 e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
4591 {
4592         struct e1000_adapter *adapter = netdev_priv(netdev);
4593         uint32_t vfta, index;
4594
4595         if ((adapter->hw.mng_cookie.status &
4596              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4597             (vid == adapter->mng_vlan_id))
4598                 return;
4599         /* add VID to filter table */
4600         index = (vid >> 5) & 0x7F;
4601         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
4602         vfta |= (1 << (vid & 0x1F));
4603         e1000_write_vfta(&adapter->hw, index, vfta);
4604 }
4605
4606 static void
4607 e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
4608 {
4609         struct e1000_adapter *adapter = netdev_priv(netdev);
4610         uint32_t vfta, index;
4611
4612         e1000_irq_disable(adapter);
4613
4614         if (adapter->vlgrp)
4615                 adapter->vlgrp->vlan_devices[vid] = NULL;
4616
4617         e1000_irq_enable(adapter);
4618
4619         if ((adapter->hw.mng_cookie.status &
4620              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4621             (vid == adapter->mng_vlan_id)) {
4622                 /* release control to f/w */
4623                 e1000_release_hw_control(adapter);
4624                 return;
4625         }
4626
4627         /* remove VID from filter table */
4628         index = (vid >> 5) & 0x7F;
4629         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
4630         vfta &= ~(1 << (vid & 0x1F));
4631         e1000_write_vfta(&adapter->hw, index, vfta);
4632 }
4633
4634 static void
4635 e1000_restore_vlan(struct e1000_adapter *adapter)
4636 {
4637         e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
4638
4639         if (adapter->vlgrp) {
4640                 uint16_t vid;
4641                 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
4642                         if (!adapter->vlgrp->vlan_devices[vid])
4643                                 continue;
4644                         e1000_vlan_rx_add_vid(adapter->netdev, vid);
4645                 }
4646         }
4647 }
4648
4649 int
4650 e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
4651 {
4652         adapter->hw.autoneg = 0;
4653
4654         /* Fiber NICs only allow 1000 gbps Full duplex */
4655         if ((adapter->hw.media_type == e1000_media_type_fiber) &&
4656                 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
4657                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
4658                 return -EINVAL;
4659         }
4660
4661         switch (spddplx) {
4662         case SPEED_10 + DUPLEX_HALF:
4663                 adapter->hw.forced_speed_duplex = e1000_10_half;
4664                 break;
4665         case SPEED_10 + DUPLEX_FULL:
4666                 adapter->hw.forced_speed_duplex = e1000_10_full;
4667                 break;
4668         case SPEED_100 + DUPLEX_HALF:
4669                 adapter->hw.forced_speed_duplex = e1000_100_half;
4670                 break;
4671         case SPEED_100 + DUPLEX_FULL:
4672                 adapter->hw.forced_speed_duplex = e1000_100_full;
4673                 break;
4674         case SPEED_1000 + DUPLEX_FULL:
4675                 adapter->hw.autoneg = 1;
4676                 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
4677                 break;
4678         case SPEED_1000 + DUPLEX_HALF: /* not supported */
4679         default:
4680                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
4681                 return -EINVAL;
4682         }
4683         return 0;
4684 }
4685
4686 #ifdef CONFIG_PM
4687 /* Save/restore 16 or 64 dwords of PCI config space depending on which
4688  * bus we're on (PCI(X) vs. PCI-E)
4689  */
4690 #define PCIE_CONFIG_SPACE_LEN 256
4691 #define PCI_CONFIG_SPACE_LEN 64
4692 static int
4693 e1000_pci_save_state(struct e1000_adapter *adapter)
4694 {
4695         struct pci_dev *dev = adapter->pdev;
4696         int size;
4697         int i;
4698
4699         if (adapter->hw.mac_type >= e1000_82571)
4700                 size = PCIE_CONFIG_SPACE_LEN;
4701         else
4702                 size = PCI_CONFIG_SPACE_LEN;
4703
4704         WARN_ON(adapter->config_space != NULL);
4705
4706         adapter->config_space = kmalloc(size, GFP_KERNEL);
4707         if (!adapter->config_space) {
4708                 DPRINTK(PROBE, ERR, "unable to allocate %d bytes\n", size);
4709                 return -ENOMEM;
4710         }
4711         for (i = 0; i < (size / 4); i++)
4712                 pci_read_config_dword(dev, i * 4, &adapter->config_space[i]);
4713         return 0;
4714 }
4715
4716 static void
4717 e1000_pci_restore_state(struct e1000_adapter *adapter)
4718 {
4719         struct pci_dev *dev = adapter->pdev;
4720         int size;
4721         int i;
4722
4723         if (adapter->config_space == NULL)
4724                 return;
4725
4726         if (adapter->hw.mac_type >= e1000_82571)
4727                 size = PCIE_CONFIG_SPACE_LEN;
4728         else
4729                 size = PCI_CONFIG_SPACE_LEN;
4730         for (i = 0; i < (size / 4); i++)
4731                 pci_write_config_dword(dev, i * 4, adapter->config_space[i]);
4732         kfree(adapter->config_space);
4733         adapter->config_space = NULL;
4734         return;
4735 }
4736 #endif /* CONFIG_PM */
4737
4738 static int
4739 e1000_suspend(struct pci_dev *pdev, pm_message_t state)
4740 {
4741         struct net_device *netdev = pci_get_drvdata(pdev);
4742         struct e1000_adapter *adapter = netdev_priv(netdev);
4743         uint32_t ctrl, ctrl_ext, rctl, manc, status;
4744         uint32_t wufc = adapter->wol;
4745 #ifdef CONFIG_PM
4746         int retval = 0;
4747 #endif
4748
4749         netif_device_detach(netdev);
4750
4751         if (netif_running(netdev)) {
4752                 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
4753                 e1000_down(adapter);
4754         }
4755
4756 #ifdef CONFIG_PM
4757         /* Implement our own version of pci_save_state(pdev) because pci-
4758          * express adapters have 256-byte config spaces. */
4759         retval = e1000_pci_save_state(adapter);
4760         if (retval)
4761                 return retval;
4762 #endif
4763
4764         status = E1000_READ_REG(&adapter->hw, STATUS);
4765         if (status & E1000_STATUS_LU)
4766                 wufc &= ~E1000_WUFC_LNKC;
4767
4768         if (wufc) {
4769                 e1000_setup_rctl(adapter);
4770                 e1000_set_multi(netdev);
4771
4772                 /* turn on all-multi mode if wake on multicast is enabled */
4773                 if (wufc & E1000_WUFC_MC) {
4774                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4775                         rctl |= E1000_RCTL_MPE;
4776                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4777                 }
4778
4779                 if (adapter->hw.mac_type >= e1000_82540) {
4780                         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4781                         /* advertise wake from D3Cold */
4782                         #define E1000_CTRL_ADVD3WUC 0x00100000
4783                         /* phy power management enable */
4784                         #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4785                         ctrl |= E1000_CTRL_ADVD3WUC |
4786                                 E1000_CTRL_EN_PHY_PWR_MGMT;
4787                         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4788                 }
4789
4790                 if (adapter->hw.media_type == e1000_media_type_fiber ||
4791                    adapter->hw.media_type == e1000_media_type_internal_serdes) {
4792                         /* keep the laser running in D3 */
4793                         ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
4794                         ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
4795                         E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
4796                 }
4797
4798                 /* Allow time for pending master requests to run */
4799                 e1000_disable_pciex_master(&adapter->hw);
4800
4801                 E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
4802                 E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
4803                 pci_enable_wake(pdev, PCI_D3hot, 1);
4804                 pci_enable_wake(pdev, PCI_D3cold, 1);
4805         } else {
4806                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
4807                 E1000_WRITE_REG(&adapter->hw, WUFC, 0);
4808                 pci_enable_wake(pdev, PCI_D3hot, 0);
4809                 pci_enable_wake(pdev, PCI_D3cold, 0);
4810         }
4811
4812         if (adapter->hw.mac_type >= e1000_82540 &&
4813             adapter->hw.mac_type < e1000_82571 &&
4814             adapter->hw.media_type == e1000_media_type_copper) {
4815                 manc = E1000_READ_REG(&adapter->hw, MANC);
4816                 if (manc & E1000_MANC_SMBUS_EN) {
4817                         manc |= E1000_MANC_ARP_EN;
4818                         E1000_WRITE_REG(&adapter->hw, MANC, manc);
4819                         pci_enable_wake(pdev, PCI_D3hot, 1);
4820                         pci_enable_wake(pdev, PCI_D3cold, 1);
4821                 }
4822         }
4823
4824         if (adapter->hw.phy_type == e1000_phy_igp_3)
4825                 e1000_phy_powerdown_workaround(&adapter->hw);
4826
4827         if (netif_running(netdev))
4828                 e1000_free_irq(adapter);
4829
4830         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
4831          * would have already happened in close and is redundant. */
4832         e1000_release_hw_control(adapter);
4833
4834         pci_disable_device(pdev);
4835
4836         pci_set_power_state(pdev, pci_choose_state(pdev, state));
4837
4838         return 0;
4839 }
4840
4841 #ifdef CONFIG_PM
4842 static int
4843 e1000_resume(struct pci_dev *pdev)
4844 {
4845         struct net_device *netdev = pci_get_drvdata(pdev);
4846         struct e1000_adapter *adapter = netdev_priv(netdev);
4847         uint32_t manc, err;
4848
4849         pci_set_power_state(pdev, PCI_D0);
4850         e1000_pci_restore_state(adapter);
4851         if ((err = pci_enable_device(pdev))) {
4852                 printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
4853                 return err;
4854         }
4855         pci_set_master(pdev);
4856
4857         pci_enable_wake(pdev, PCI_D3hot, 0);
4858         pci_enable_wake(pdev, PCI_D3cold, 0);
4859
4860         if (netif_running(netdev) && (err = e1000_request_irq(adapter)))
4861                 return err;
4862
4863         e1000_power_up_phy(adapter);
4864         e1000_reset(adapter);
4865         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
4866
4867         if (netif_running(netdev))
4868                 e1000_up(adapter);
4869
4870         netif_device_attach(netdev);
4871
4872         if (adapter->hw.mac_type >= e1000_82540 &&
4873             adapter->hw.mac_type < e1000_82571 &&
4874             adapter->hw.media_type == e1000_media_type_copper) {
4875                 manc = E1000_READ_REG(&adapter->hw, MANC);
4876                 manc &= ~(E1000_MANC_ARP_EN);
4877                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
4878         }
4879
4880         /* If the controller is 82573 and f/w is AMT, do not set
4881          * DRV_LOAD until the interface is up.  For all other cases,
4882          * let the f/w know that the h/w is now under the control
4883          * of the driver. */
4884         if (adapter->hw.mac_type != e1000_82573 ||
4885             !e1000_check_mng_mode(&adapter->hw))
4886                 e1000_get_hw_control(adapter);
4887
4888         return 0;
4889 }
4890 #endif
4891
4892 static void e1000_shutdown(struct pci_dev *pdev)
4893 {
4894         e1000_suspend(pdev, PMSG_SUSPEND);
4895 }
4896
4897 #ifdef CONFIG_NET_POLL_CONTROLLER
4898 /*
4899  * Polling 'interrupt' - used by things like netconsole to send skbs
4900  * without having to re-enable interrupts. It's not called while
4901  * the interrupt routine is executing.
4902  */
4903 static void
4904 e1000_netpoll(struct net_device *netdev)
4905 {
4906         struct e1000_adapter *adapter = netdev_priv(netdev);
4907
4908         disable_irq(adapter->pdev->irq);
4909         e1000_intr(adapter->pdev->irq, netdev);
4910         e1000_clean_tx_irq(adapter, adapter->tx_ring);
4911 #ifndef CONFIG_E1000_NAPI
4912         adapter->clean_rx(adapter, adapter->rx_ring);
4913 #endif
4914         enable_irq(adapter->pdev->irq);
4915 }
4916 #endif
4917
4918 /**
4919  * e1000_io_error_detected - called when PCI error is detected
4920  * @pdev: Pointer to PCI device
4921  * @state: The current pci conneection state
4922  *
4923  * This function is called after a PCI bus error affecting
4924  * this device has been detected.
4925  */
4926 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
4927 {
4928         struct net_device *netdev = pci_get_drvdata(pdev);
4929         struct e1000_adapter *adapter = netdev->priv;
4930
4931         netif_device_detach(netdev);
4932
4933         if (netif_running(netdev))
4934                 e1000_down(adapter);
4935         pci_disable_device(pdev);
4936
4937         /* Request a slot slot reset. */
4938         return PCI_ERS_RESULT_NEED_RESET;
4939 }
4940
4941 /**
4942  * e1000_io_slot_reset - called after the pci bus has been reset.
4943  * @pdev: Pointer to PCI device
4944  *
4945  * Restart the card from scratch, as if from a cold-boot. Implementation
4946  * resembles the first-half of the e1000_resume routine.
4947  */
4948 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
4949 {
4950         struct net_device *netdev = pci_get_drvdata(pdev);
4951         struct e1000_adapter *adapter = netdev->priv;
4952
4953         if (pci_enable_device(pdev)) {
4954                 printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
4955                 return PCI_ERS_RESULT_DISCONNECT;
4956         }
4957         pci_set_master(pdev);
4958
4959         pci_enable_wake(pdev, PCI_D3hot, 0);
4960         pci_enable_wake(pdev, PCI_D3cold, 0);
4961
4962         e1000_reset(adapter);
4963         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
4964
4965         return PCI_ERS_RESULT_RECOVERED;
4966 }
4967
4968 /**
4969  * e1000_io_resume - called when traffic can start flowing again.
4970  * @pdev: Pointer to PCI device
4971  *
4972  * This callback is called when the error recovery driver tells us that
4973  * its OK to resume normal operation. Implementation resembles the
4974  * second-half of the e1000_resume routine.
4975  */
4976 static void e1000_io_resume(struct pci_dev *pdev)
4977 {
4978         struct net_device *netdev = pci_get_drvdata(pdev);
4979         struct e1000_adapter *adapter = netdev->priv;
4980         uint32_t manc, swsm;
4981
4982         if (netif_running(netdev)) {
4983                 if (e1000_up(adapter)) {
4984                         printk("e1000: can't bring device back up after reset\n");
4985                         return;
4986                 }
4987         }
4988
4989         netif_device_attach(netdev);
4990
4991         if (adapter->hw.mac_type >= e1000_82540 &&
4992             adapter->hw.mac_type < e1000_82571 &&
4993             adapter->hw.media_type == e1000_media_type_copper) {
4994                 manc = E1000_READ_REG(&adapter->hw, MANC);
4995                 manc &= ~(E1000_MANC_ARP_EN);
4996                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
4997         }
4998
4999         switch (adapter->hw.mac_type) {
5000         case e1000_82573:
5001                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
5002                 E1000_WRITE_REG(&adapter->hw, SWSM,
5003                                 swsm | E1000_SWSM_DRV_LOAD);
5004                 break;
5005         default:
5006                 break;
5007         }
5008
5009         if (netif_running(netdev))
5010                 mod_timer(&adapter->watchdog_timer, jiffies);
5011 }
5012
5013 /* e1000_main.c */