2 tristate "Remote Controller adapters"
6 Enable support for Remote Controllers on Linux. This is
7 needed in order to support several video capture adapters,
8 standalone IR receivers/transmitters, and RF receivers.
10 Enable this option if you have a video capture board even
11 if you don't need IR, as otherwise, you may not be able to
12 compile the driver for your adapter.
21 Enable this option to build the Linux Infrared Remote
22 Control (LIRC) core device interface driver. The LIRC
23 interface passes raw IR to and from userspace, where the
24 LIRC daemon handles protocol decoding for IR reception and
25 encoding for IR transmitting (aka "blasting").
27 source "drivers/media/rc/keymaps/Kconfig"
30 tristate "Enable IR raw decoder for the NEC protocol"
36 Enable this option if you have IR with NEC protocol, and
37 if the IR is decoded in software
40 tristate "Enable IR raw decoder for the RC-5 protocol"
46 Enable this option if you have IR with RC-5 protocol, and
47 if the IR is decoded in software
50 tristate "Enable IR raw decoder for the RC6 protocol"
56 Enable this option if you have an infrared remote control which
57 uses the RC6 protocol, and you need software decoding support.
60 tristate "Enable IR raw decoder for the JVC protocol"
66 Enable this option if you have an infrared remote control which
67 uses the JVC protocol, and you need software decoding support.
69 config IR_SONY_DECODER
70 tristate "Enable IR raw decoder for the Sony protocol"
75 Enable this option if you have an infrared remote control which
76 uses the Sony protocol, and you need software decoding support.
78 config IR_RC5_SZ_DECODER
79 tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
85 Enable this option if you have IR with RC-5 (streamzap) protocol,
86 and if the IR is decoded in software. (The Streamzap PC Remote
87 uses an IR protocol that is almost standard RC-5, but not quite,
88 as it uses an additional bit).
90 config IR_MCE_KBD_DECODER
91 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
97 Enable this option if you have a Microsoft Remote Keyboard for
98 Windows Media Center Edition, which you would like to use with
99 a raw IR receiver in your system.
102 tristate "Enable IR to LIRC bridge"
108 Enable this option to pass raw IR to and from userspace via
112 tristate "ATI / X10 USB RF remote control"
113 depends on USB_ARCH_HAS_HCD
117 Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
118 These are RF remotes with USB receivers.
119 The ATI remote comes with many of ATI's All-In-Wonder video cards.
120 The X10 "Lola" remote is available at:
121 <http://www.x10.com/products/lola_sg1.htm>
122 This driver provides mouse pointer, left and right mouse buttons,
123 and maps all the other remote buttons to keypress events.
125 To compile this driver as a module, choose M here: the module will be
129 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
133 Say Y here to enable support for integrated infrared receiver
134 /transceiver made by ENE.
136 You can see if you have it by looking at lspnp output.
137 Output should include ENE0100 ENE0200 or something similar.
139 To compile this driver as a module, choose M here: the
140 module will be called ene_ir.
143 tristate "SoundGraph iMON Receiver and Display"
144 depends on USB_ARCH_HAS_HCD
148 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
149 IR Receiver and/or LCD/VFD/VGA display.
151 To compile this driver as a module, choose M here: the
152 module will be called imon.
155 tristate "Windows Media Center Ed. eHome Infrared Transceiver"
156 depends on USB_ARCH_HAS_HCD
160 Say Y here if you want to use a Windows Media Center Edition
161 eHome Infrared Transceiver.
163 To compile this driver as a module, choose M here: the
164 module will be called mceusb.
167 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
171 Say Y here to enable support for integrated infrared receivers
172 /transceivers made by ITE Tech Inc. These are found in
173 several ASUS devices, like the ASUS Digimatrix or the ASUS
176 To compile this driver as a module, choose M here: the
177 module will be called ite-cir.
180 tristate "Fintek Consumer Infrared Transceiver"
184 Say Y here to enable support for integrated infrared receiver
185 /transciever made by Fintek. This chip is found on assorted
186 Jetway motherboards (and of course, possibly others).
188 To compile this driver as a module, choose M here: the
189 module will be called fintek-cir.
192 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
196 Say Y here to enable support for integrated infrared receiver
197 /transciever made by Nuvoton (formerly Winbond). This chip is
198 found in the ASRock ION 330HT, as well as assorted Intel
199 DP55-series motherboards (and of course, possibly others).
201 To compile this driver as a module, choose M here: the
202 module will be called nuvoton-cir.
205 tristate "RedRat3 IR Transceiver"
206 depends on USB_ARCH_HAS_HCD
210 Say Y here if you want to use a RedRat3 Infrared Transceiver.
212 To compile this driver as a module, choose M here: the
213 module will be called redrat3.
216 tristate "Streamzap PC Remote IR Receiver"
217 depends on USB_ARCH_HAS_HCD
221 Say Y here if you want to use a Streamzap PC Remote
224 To compile this driver as a module, choose M here: the
225 module will be called streamzap.
227 config IR_WINBOND_CIR
228 tristate "Winbond IR remote control"
229 depends on X86 && PNP
236 Say Y here if you want to use the IR remote functionality found
237 in some Winbond SuperI/O chips. Currently only the WPCD376I
238 chip is supported (included in some Intel Media series
241 To compile this driver as a module, choose M here: the module will
242 be called winbond_cir.
245 tristate "Remote Control Loopback Driver"
248 Say Y here if you want support for the remote control loopback
249 driver which allows TX data to be sent back as RX data.
250 This is mostly useful for debugging purposes.
252 If you're not sure, select N here.
254 To compile this driver as a module, choose M here: the module will
255 be called rc_loopback.