drivers/acpi/acpica/utxface.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utxface - External interfaces, miscellaneous utility functions
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #define EXPORT_ACPI_INTERFACES
  45
  46 #include <acpi/acpi.h>
  47 #include "accommon.h"
  48 #include "acdebug.h"
  49
  50 #define _COMPONENT          ACPI_UTILITIES
  51 ACPI_MODULE_NAME("utxface")
  52
  53 /*******************************************************************************
  54  *
  55  * FUNCTION:    acpi_terminate
  56  *
  57  * PARAMETERS:  None
  58  *
  59  * RETURN:      Status
  60  *
  61  * DESCRIPTION: Shutdown the ACPICA subsystem and release all resources.
  62  *
  63  ******************************************************************************/
  64 acpi_status acpi_terminate(void)
  65 {
  66         acpi_status status;
  67
  68         ACPI_FUNCTION_TRACE(acpi_terminate);
  69
  70         /* Just exit if subsystem is already shutdown */
  71
  72         if (acpi_gbl_shutdown) {
  73                 ACPI_ERROR((AE_INFO, "ACPI Subsystem is already terminated"));
  74                 return_ACPI_STATUS(AE_OK);
  75         }
  76
  77         /* Subsystem appears active, go ahead and shut it down */
  78
  79         acpi_gbl_shutdown = TRUE;
  80         acpi_gbl_startup_flags = 0;
  81         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n"));
  82
  83         /* Terminate the AML Debugger if present */
  84
  85         ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
  86
  87         /* Shutdown and free all resources */
  88
  89         acpi_ut_subsystem_shutdown();
  90
  91         /* Free the mutex objects */
  92
  93         acpi_ut_mutex_terminate();
  94
  95 #ifdef ACPI_DEBUGGER
  96
  97         /* Shut down the debugger */
  98
  99         acpi_db_terminate();
 100 #endif
 101
 102         /* Now we can shutdown the OS-dependent layer */
 103
 104         status = acpi_os_terminate();
 105         return_ACPI_STATUS(status);
 106 }
 107
 108 ACPI_EXPORT_SYMBOL(acpi_terminate)
 109
 110 #ifndef ACPI_ASL_COMPILER
 111 #ifdef ACPI_FUTURE_USAGE
 112 /*******************************************************************************
 113  *
 114  * FUNCTION:    acpi_subsystem_status
 115  *
 116  * PARAMETERS:  None
 117  *
 118  * RETURN:      Status of the ACPI subsystem
 119  *
 120  * DESCRIPTION: Other drivers that use the ACPI subsystem should call this
 121  *              before making any other calls, to ensure the subsystem
 122  *              initialized successfully.
 123  *
 124  ******************************************************************************/
 125 acpi_status acpi_subsystem_status(void)
 126 {
 127
 128         if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
 129                 return (AE_OK);
 130         } else {
 131                 return (AE_ERROR);
 132         }
 133 }
 134
 135 ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
 136
 137 /*******************************************************************************
 138  *
 139  * FUNCTION:    acpi_get_system_info
 140  *
 141  * PARAMETERS:  out_buffer      - A buffer to receive the resources for the
 142  *                                device
 143  *
 144  * RETURN:      status          - the status of the call
 145  *
 146  * DESCRIPTION: This function is called to get information about the current
 147  *              state of the ACPI subsystem. It will return system information
 148  *              in the out_buffer.
 149  *
 150  *              If the function fails an appropriate status will be returned
 151  *              and the value of out_buffer is undefined.
 152  *
 153  ******************************************************************************/
 154 acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer)
 155 {
 156         struct acpi_system_info *info_ptr;
 157         acpi_status status;
 158
 159         ACPI_FUNCTION_TRACE(acpi_get_system_info);
 160
 161         /* Parameter validation */
 162
 163         status = acpi_ut_validate_buffer(out_buffer);
 164         if (ACPI_FAILURE(status)) {
 165                 return_ACPI_STATUS(status);
 166         }
 167
 168         /* Validate/Allocate/Clear caller buffer */
 169
 170         status =
 171             acpi_ut_initialize_buffer(out_buffer,
 172                                       sizeof(struct acpi_system_info));
 173         if (ACPI_FAILURE(status)) {
 174                 return_ACPI_STATUS(status);
 175         }
 176
 177         /*
 178          * Populate the return buffer
 179          */
 180         info_ptr = (struct acpi_system_info *)out_buffer->pointer;
 181
 182         info_ptr->acpi_ca_version = ACPI_CA_VERSION;
 183
 184         /* System flags (ACPI capabilities) */
 185
 186         info_ptr->flags = ACPI_SYS_MODE_ACPI;
 187
 188         /* Timer resolution - 24 or 32 bits  */
 189
 190         if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
 191                 info_ptr->timer_resolution = 24;
 192         } else {
 193                 info_ptr->timer_resolution = 32;
 194         }
 195
 196         /* Clear the reserved fields */
 197
 198         info_ptr->reserved1 = 0;
 199         info_ptr->reserved2 = 0;
 200
 201         /* Current debug levels */
 202
 203         info_ptr->debug_layer = acpi_dbg_layer;
 204         info_ptr->debug_level = acpi_dbg_level;
 205
 206         return_ACPI_STATUS(AE_OK);
 207 }
 208
 209 ACPI_EXPORT_SYMBOL(acpi_get_system_info)
 210
 211 /*****************************************************************************
 212  *
 213  * FUNCTION:    acpi_install_initialization_handler
 214  *
 215  * PARAMETERS:  handler             - Callback procedure
 216  *              function            - Not (currently) used, see below
 217  *
 218  * RETURN:      Status
 219  *
 220  * DESCRIPTION: Install an initialization handler
 221  *
 222  * TBD: When a second function is added, must save the Function also.
 223  *
 224  ****************************************************************************/
 225 acpi_status
 226 acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
 227 {
 228
 229         if (!handler) {
 230                 return (AE_BAD_PARAMETER);
 231         }
 232
 233         if (acpi_gbl_init_handler) {
 234                 return (AE_ALREADY_EXISTS);
 235         }
 236
 237         acpi_gbl_init_handler = handler;
 238         return (AE_OK);
 239 }
 240
 241 ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
 242 #endif                          /*  ACPI_FUTURE_USAGE  */
 243
 244 /*****************************************************************************
 245  *
 246  * FUNCTION:    acpi_purge_cached_objects
 247  *
 248  * PARAMETERS:  None
 249  *
 250  * RETURN:      Status
 251  *
 252  * DESCRIPTION: Empty all caches (delete the cached objects)
 253  *
 254  ****************************************************************************/
 255 acpi_status acpi_purge_cached_objects(void)
 256 {
 257         ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
 258
 259         (void)acpi_os_purge_cache(acpi_gbl_state_cache);
 260         (void)acpi_os_purge_cache(acpi_gbl_operand_cache);
 261         (void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
 262         (void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
 263
 264         return_ACPI_STATUS(AE_OK);
 265 }
 266
 267 ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)
 268
 269 /*****************************************************************************
 270  *
 271  * FUNCTION:    acpi_install_interface
 272  *
 273  * PARAMETERS:  interface_name      - The interface to install
 274  *
 275  * RETURN:      Status
 276  *
 277  * DESCRIPTION: Install an _OSI interface to the global list
 278  *
 279  ****************************************************************************/
 280 acpi_status acpi_install_interface(acpi_string interface_name)
 281 {
 282         acpi_status status;
 283         struct acpi_interface_info *interface_info;
 284
 285         /* Parameter validation */
 286
 287         if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) {
 288                 return (AE_BAD_PARAMETER);
 289         }
 290
 291         status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
 292         if (ACPI_FAILURE(status)) {
 293                 return (status);
 294         }
 295
 296         /* Check if the interface name is already in the global list */
 297
 298         interface_info = acpi_ut_get_interface(interface_name);
 299         if (interface_info) {
 300                 /*
 301                  * The interface already exists in the list. This is OK if the
 302                  * interface has been marked invalid -- just clear the bit.
 303                  */
 304                 if (interface_info->flags & ACPI_OSI_INVALID) {
 305                         interface_info->flags &= ~ACPI_OSI_INVALID;
 306                         status = AE_OK;
 307                 } else {
 308                         status = AE_ALREADY_EXISTS;
 309                 }
 310         } else {
 311                 /* New interface name, install into the global list */
 312
 313                 status = acpi_ut_install_interface(interface_name);
 314         }
 315
 316         acpi_os_release_mutex(acpi_gbl_osi_mutex);
 317         return (status);
 318 }
 319
 320 ACPI_EXPORT_SYMBOL(acpi_install_interface)
 321
 322 /*****************************************************************************
 323  *
 324  * FUNCTION:    acpi_remove_interface
 325  *
 326  * PARAMETERS:  interface_name      - The interface to remove
 327  *
 328  * RETURN:      Status
 329  *
 330  * DESCRIPTION: Remove an _OSI interface from the global list
 331  *
 332  ****************************************************************************/
 333 acpi_status acpi_remove_interface(acpi_string interface_name)
 334 {
 335         acpi_status status;
 336
 337         /* Parameter validation */
 338
 339         if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) {
 340                 return (AE_BAD_PARAMETER);
 341         }
 342
 343         status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
 344         if (ACPI_FAILURE(status)) {
 345                 return (status);
 346         }
 347
 348         status = acpi_ut_remove_interface(interface_name);
 349
 350         acpi_os_release_mutex(acpi_gbl_osi_mutex);
 351         return (status);
 352 }
 353
 354 ACPI_EXPORT_SYMBOL(acpi_remove_interface)
 355
 356 /*****************************************************************************
 357  *
 358  * FUNCTION:    acpi_install_interface_handler
 359  *
 360  * PARAMETERS:  handler             - The _OSI interface handler to install
 361  *                                    NULL means "remove existing handler"
 362  *
 363  * RETURN:      Status
 364  *
 365  * DESCRIPTION: Install a handler for the predefined _OSI ACPI method.
 366  *              invoked during execution of the internal implementation of
 367  *              _OSI. A NULL handler simply removes any existing handler.
 368  *
 369  ****************************************************************************/
 370 acpi_status acpi_install_interface_handler(acpi_interface_handler handler)
 371 {
 372         acpi_status status;
 373
 374         status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
 375         if (ACPI_FAILURE(status)) {
 376                 return (status);
 377         }
 378
 379         if (handler && acpi_gbl_interface_handler) {
 380                 status = AE_ALREADY_EXISTS;
 381         } else {
 382                 acpi_gbl_interface_handler = handler;
 383         }
 384
 385         acpi_os_release_mutex(acpi_gbl_osi_mutex);
 386         return (status);
 387 }
 388
 389 ACPI_EXPORT_SYMBOL(acpi_install_interface_handler)
 390
 391 /*****************************************************************************
 392  *
 393  * FUNCTION:    acpi_update_interfaces
 394  *
 395  * PARAMETERS:  action              - Actions to be performed during the
 396  *                                    update
 397  *
 398  * RETURN:      Status
 399  *
 400  * DESCRIPTION: Update _OSI interface strings, disabling or enabling OS vendor
 401  *              string or/and feature group strings.
 402  *
 403  ****************************************************************************/
 404 acpi_status acpi_update_interfaces(u8 action)
 405 {
 406         acpi_status status;
 407
 408         status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
 409         if (ACPI_FAILURE(status)) {
 410                 return (status);
 411         }
 412
 413         status = acpi_ut_update_interfaces(action);
 414
 415         acpi_os_release_mutex(acpi_gbl_osi_mutex);
 416         return (status);
 417 }
 418
 419 /*****************************************************************************
 420  *
 421  * FUNCTION:    acpi_check_address_range
 422  *
 423  * PARAMETERS:  space_id            - Address space ID
 424  *              address             - Start address
 425  *              length              - Length
 426  *              warn                - TRUE if warning on overlap desired
 427  *
 428  * RETURN:      Count of the number of conflicts detected.
 429  *
 430  * DESCRIPTION: Check if the input address range overlaps any of the
 431  *              ASL operation region address ranges.
 432  *
 433  ****************************************************************************/
 434
 435 u32
 436 acpi_check_address_range(acpi_adr_space_type space_id,
 437                          acpi_physical_address address,
 438                          acpi_size length, u8 warn)
 439 {
 440         u32 overlaps;
 441         acpi_status status;
 442
 443         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 444         if (ACPI_FAILURE(status)) {
 445                 return (0);
 446         }
 447
 448         overlaps = acpi_ut_check_address_range(space_id, address,
 449                                                (u32)length, warn);
 450
 451         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 452         return (overlaps);
 453 }
 454
 455 ACPI_EXPORT_SYMBOL(acpi_check_address_range)
 456 #endif                          /* !ACPI_ASL_COMPILER */
 457 /*******************************************************************************
 458  *
 459  * FUNCTION:    acpi_decode_pld_buffer
 460  *
 461  * PARAMETERS:  in_buffer           - Buffer returned by _PLD method
 462  *              length              - Length of the in_buffer
 463  *              return_buffer       - Where the decode buffer is returned
 464  *
 465  * RETURN:      Status and the decoded _PLD buffer. User must deallocate
 466  *              the buffer via ACPI_FREE.
 467  *
 468  * DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into
 469  *              a local struct that is much more useful to an ACPI driver.
 470  *
 471  ******************************************************************************/
 472 acpi_status
 473 acpi_decode_pld_buffer(u8 *in_buffer,
 474                        acpi_size length, struct acpi_pld_info ** return_buffer)
 475 {
 476         struct acpi_pld_info *pld_info;
 477         u32 *buffer = ACPI_CAST_PTR(u32, in_buffer);
 478         u32 dword;
 479
 480         /* Parameter validation */
 481
 482         if (!in_buffer || !return_buffer || (length < 16)) {
 483                 return (AE_BAD_PARAMETER);
 484         }
 485
 486         pld_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pld_info));
 487         if (!pld_info) {
 488                 return (AE_NO_MEMORY);
 489         }
 490
 491         /* First 32-bit DWord */
 492
 493         ACPI_MOVE_32_TO_32(&dword, &buffer[0]);
 494         pld_info->revision = ACPI_PLD_GET_REVISION(&dword);
 495         pld_info->ignore_color = ACPI_PLD_GET_IGNORE_COLOR(&dword);
 496         pld_info->color = ACPI_PLD_GET_COLOR(&dword);
 497
 498         /* Second 32-bit DWord */
 499
 500         ACPI_MOVE_32_TO_32(&dword, &buffer[1]);
 501         pld_info->width = ACPI_PLD_GET_WIDTH(&dword);
 502         pld_info->height = ACPI_PLD_GET_HEIGHT(&dword);
 503
 504         /* Third 32-bit DWord */
 505
 506         ACPI_MOVE_32_TO_32(&dword, &buffer[2]);
 507         pld_info->user_visible = ACPI_PLD_GET_USER_VISIBLE(&dword);
 508         pld_info->dock = ACPI_PLD_GET_DOCK(&dword);
 509         pld_info->lid = ACPI_PLD_GET_LID(&dword);
 510         pld_info->panel = ACPI_PLD_GET_PANEL(&dword);
 511         pld_info->vertical_position = ACPI_PLD_GET_VERTICAL(&dword);
 512         pld_info->horizontal_position = ACPI_PLD_GET_HORIZONTAL(&dword);
 513         pld_info->shape = ACPI_PLD_GET_SHAPE(&dword);
 514         pld_info->group_orientation = ACPI_PLD_GET_ORIENTATION(&dword);
 515         pld_info->group_token = ACPI_PLD_GET_TOKEN(&dword);
 516         pld_info->group_position = ACPI_PLD_GET_POSITION(&dword);
 517         pld_info->bay = ACPI_PLD_GET_BAY(&dword);
 518
 519         /* Fourth 32-bit DWord */
 520
 521         ACPI_MOVE_32_TO_32(&dword, &buffer[3]);
 522         pld_info->ejectable = ACPI_PLD_GET_EJECTABLE(&dword);
 523         pld_info->ospm_eject_required = ACPI_PLD_GET_OSPM_EJECT(&dword);
 524         pld_info->cabinet_number = ACPI_PLD_GET_CABINET(&dword);
 525         pld_info->card_cage_number = ACPI_PLD_GET_CARD_CAGE(&dword);
 526         pld_info->reference = ACPI_PLD_GET_REFERENCE(&dword);
 527         pld_info->rotation = ACPI_PLD_GET_ROTATION(&dword);
 528         pld_info->order = ACPI_PLD_GET_ORDER(&dword);
 529
 530         if (length >= ACPI_PLD_BUFFER_SIZE) {
 531
 532                 /* Fifth 32-bit DWord (Revision 2 of _PLD) */
 533
 534                 ACPI_MOVE_32_TO_32(&dword, &buffer[4]);
 535                 pld_info->vertical_offset = ACPI_PLD_GET_VERT_OFFSET(&dword);
 536                 pld_info->horizontal_offset = ACPI_PLD_GET_HORIZ_OFFSET(&dword);
 537         }
 538
 539         *return_buffer = pld_info;
 540         return (AE_OK);
 541 }
 542
 543 ACPI_EXPORT_SYMBOL(acpi_decode_pld_buffer)