arch/blackfin/mach-bf548/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/mtd.h>
  12 #include <linux/mtd/partitions.h>
  13 #include <linux/mtd/physmap.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/spi/flash.h>
  16 #include <linux/irq.h>
  17 #include <linux/i2c.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <asm/bfin5xx_spi.h>
  21 #include <asm/dma.h>
  22 #include <asm/gpio.h>
  23 #include <asm/nand.h>
  24 #include <asm/dpmc.h>
  25 #include <asm/portmux.h>
  26 #include <asm/bfin_sdh.h>
  27 #include <mach/bf54x_keys.h>
  28 #include <linux/input.h>
  29 #include <linux/spi/ad7877.h>
  30
  31 /*
  32  * Name the Board for the /proc/cpuinfo
  33  */
  34 const char bfin_board_name[] = "ADI BF548-EZKIT";
  35
  36 /*
  37  *  Driver needs to know address, irq and flag pin.
  38  */
  39
  40 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  41 #include <linux/usb/isp1760.h>
  42 static struct resource bfin_isp1760_resources[] = {
  43         [0] = {
  44                 .start  = 0x2C0C0000,
  45                 .end    = 0x2C0C0000 + 0xfffff,
  46                 .flags  = IORESOURCE_MEM,
  47         },
  48         [1] = {
  49                 .start  = IRQ_PG7,
  50                 .end    = IRQ_PG7,
  51                 .flags  = IORESOURCE_IRQ,
  52         },
  53 };
  54
  55 static struct isp1760_platform_data isp1760_priv = {
  56         .is_isp1761 = 0,
  57         .bus_width_16 = 1,
  58         .port1_otg = 0,
  59         .analog_oc = 0,
  60         .dack_polarity_high = 0,
  61         .dreq_polarity_high = 0,
  62 };
  63
  64 static struct platform_device bfin_isp1760_device = {
  65         .name           = "isp1760",
  66         .id             = 0,
  67         .dev = {
  68                 .platform_data = &isp1760_priv,
  69         },
  70         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  71         .resource       = bfin_isp1760_resources,
  72 };
  73 #endif
  74
  75 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
  76
  77 #include <mach/bf54x-lq043.h>
  78
  79 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
  80         .width =        95,
  81         .height =       54,
  82         .xres =         {480, 480, 480},
  83         .yres =         {272, 272, 272},
  84         .bpp =          {24, 24, 24},
  85         .disp =         GPIO_PE3,
  86 };
  87
  88 static struct resource bf54x_lq043_resources[] = {
  89         {
  90                 .start = IRQ_EPPI0_ERR,
  91                 .end = IRQ_EPPI0_ERR,
  92                 .flags = IORESOURCE_IRQ,
  93         },
  94 };
  95
  96 static struct platform_device bf54x_lq043_device = {
  97         .name           = "bf54x-lq043",
  98         .id             = -1,
  99         .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
 100         .resource       = bf54x_lq043_resources,
 101         .dev            = {
 102                 .platform_data = &bf54x_lq043_data,
 103         },
 104 };
 105 #endif
 106
 107 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
 108 static const unsigned int bf548_keymap[] = {
 109         KEYVAL(0, 0, KEY_ENTER),
 110         KEYVAL(0, 1, KEY_HELP),
 111         KEYVAL(0, 2, KEY_0),
 112         KEYVAL(0, 3, KEY_BACKSPACE),
 113         KEYVAL(1, 0, KEY_TAB),
 114         KEYVAL(1, 1, KEY_9),
 115         KEYVAL(1, 2, KEY_8),
 116         KEYVAL(1, 3, KEY_7),
 117         KEYVAL(2, 0, KEY_DOWN),
 118         KEYVAL(2, 1, KEY_6),
 119         KEYVAL(2, 2, KEY_5),
 120         KEYVAL(2, 3, KEY_4),
 121         KEYVAL(3, 0, KEY_UP),
 122         KEYVAL(3, 1, KEY_3),
 123         KEYVAL(3, 2, KEY_2),
 124         KEYVAL(3, 3, KEY_1),
 125 };
 126
 127 static struct bfin_kpad_platform_data bf54x_kpad_data = {
 128         .rows                   = 4,
 129         .cols                   = 4,
 130         .keymap                 = bf548_keymap,
 131         .keymapsize             = ARRAY_SIZE(bf548_keymap),
 132         .repeat                 = 0,
 133         .debounce_time          = 5000, /* ns (5ms) */
 134         .coldrive_time          = 1000, /* ns (1ms) */
 135         .keyup_test_interval    = 50, /* ms (50ms) */
 136 };
 137
 138 static struct resource bf54x_kpad_resources[] = {
 139         {
 140                 .start = IRQ_KEY,
 141                 .end = IRQ_KEY,
 142                 .flags = IORESOURCE_IRQ,
 143         },
 144 };
 145
 146 static struct platform_device bf54x_kpad_device = {
 147         .name           = "bf54x-keys",
 148         .id             = -1,
 149         .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
 150         .resource       = bf54x_kpad_resources,
 151         .dev            = {
 152                 .platform_data = &bf54x_kpad_data,
 153         },
 154 };
 155 #endif
 156
 157 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 158 #include <asm/bfin_rotary.h>
 159
 160 static struct bfin_rotary_platform_data bfin_rotary_data = {
 161         /*.rotary_up_key     = KEY_UP,*/
 162         /*.rotary_down_key   = KEY_DOWN,*/
 163         .rotary_rel_code   = REL_WHEEL,
 164         .rotary_button_key = KEY_ENTER,
 165         .debounce          = 10,        /* 0..17 */
 166         .mode              = ROT_QUAD_ENC | ROT_DEBE,
 167 };
 168
 169 static struct resource bfin_rotary_resources[] = {
 170         {
 171                 .start = IRQ_CNT,
 172                 .end = IRQ_CNT,
 173                 .flags = IORESOURCE_IRQ,
 174         },
 175 };
 176
 177 static struct platform_device bfin_rotary_device = {
 178         .name           = "bfin-rotary",
 179         .id             = -1,
 180         .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
 181         .resource       = bfin_rotary_resources,
 182         .dev            = {
 183                 .platform_data = &bfin_rotary_data,
 184         },
 185 };
 186 #endif
 187
 188 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 189 #include <linux/input/adxl34x.h>
 190 static const struct adxl34x_platform_data adxl34x_info = {
 191         .x_axis_offset = 0,
 192         .y_axis_offset = 0,
 193         .z_axis_offset = 0,
 194         .tap_threshold = 0x31,
 195         .tap_duration = 0x10,
 196         .tap_latency = 0x60,
 197         .tap_window = 0xF0,
 198         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 199         .act_axis_control = 0xFF,
 200         .activity_threshold = 5,
 201         .inactivity_threshold = 3,
 202         .inactivity_time = 4,
 203         .free_fall_threshold = 0x7,
 204         .free_fall_time = 0x20,
 205         .data_rate = 0x8,
 206         .data_range = ADXL_FULL_RES,
 207
 208         .ev_type = EV_ABS,
 209         .ev_code_x = ABS_X,             /* EV_REL */
 210         .ev_code_y = ABS_Y,             /* EV_REL */
 211         .ev_code_z = ABS_Z,             /* EV_REL */
 212
 213         .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 214
 215 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 216 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 217         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 218         .fifo_mode = ADXL_FIFO_STREAM,
 219         .orientation_enable = ADXL_EN_ORIENTATION_3D,
 220         .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
 221         .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
 222         /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
 223         .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 224 };
 225 #endif
 226
 227 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 228 static struct platform_device rtc_device = {
 229         .name = "rtc-bfin",
 230         .id   = -1,
 231 };
 232 #endif
 233
 234 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 235 #ifdef CONFIG_SERIAL_BFIN_UART0
 236 static struct resource bfin_uart0_resources[] = {
 237         {
 238                 .start = UART0_DLL,
 239                 .end = UART0_RBR+2,
 240                 .flags = IORESOURCE_MEM,
 241         },
 242         {
 243                 .start = IRQ_UART0_RX,
 244                 .end = IRQ_UART0_RX+1,
 245                 .flags = IORESOURCE_IRQ,
 246         },
 247         {
 248                 .start = IRQ_UART0_ERROR,
 249                 .end = IRQ_UART0_ERROR,
 250                 .flags = IORESOURCE_IRQ,
 251         },
 252         {
 253                 .start = CH_UART0_TX,
 254                 .end = CH_UART0_TX,
 255                 .flags = IORESOURCE_DMA,
 256         },
 257         {
 258                 .start = CH_UART0_RX,
 259                 .end = CH_UART0_RX,
 260                 .flags = IORESOURCE_DMA,
 261         },
 262 };
 263
 264 unsigned short bfin_uart0_peripherals[] = {
 265         P_UART0_TX, P_UART0_RX, 0
 266 };
 267
 268 static struct platform_device bfin_uart0_device = {
 269         .name = "bfin-uart",
 270         .id = 0,
 271         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 272         .resource = bfin_uart0_resources,
 273         .dev = {
 274                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 275         },
 276 };
 277 #endif
 278 #ifdef CONFIG_SERIAL_BFIN_UART1
 279 static struct resource bfin_uart1_resources[] = {
 280         {
 281                 .start = UART1_DLL,
 282                 .end = UART1_RBR+2,
 283                 .flags = IORESOURCE_MEM,
 284         },
 285         {
 286                 .start = IRQ_UART1_RX,
 287                 .end = IRQ_UART1_RX+1,
 288                 .flags = IORESOURCE_IRQ,
 289         },
 290         {
 291                 .start = IRQ_UART1_ERROR,
 292                 .end = IRQ_UART1_ERROR,
 293                 .flags = IORESOURCE_IRQ,
 294         },
 295         {
 296                 .start = CH_UART1_TX,
 297                 .end = CH_UART1_TX,
 298                 .flags = IORESOURCE_DMA,
 299         },
 300         {
 301                 .start = CH_UART1_RX,
 302                 .end = CH_UART1_RX,
 303                 .flags = IORESOURCE_DMA,
 304         },
 305 #ifdef CONFIG_BFIN_UART1_CTSRTS
 306         {       /* CTS pin -- 0 means not supported */
 307                 .start = GPIO_PE10,
 308                 .end = GPIO_PE10,
 309                 .flags = IORESOURCE_IO,
 310         },
 311         {       /* RTS pin -- 0 means not supported */
 312                 .start = GPIO_PE9,
 313                 .end = GPIO_PE9,
 314                 .flags = IORESOURCE_IO,
 315         },
 316 #endif
 317 };
 318
 319 unsigned short bfin_uart1_peripherals[] = {
 320         P_UART1_TX, P_UART1_RX,
 321 #ifdef CONFIG_BFIN_UART1_CTSRTS
 322         P_UART1_RTS, P_UART1_CTS,
 323 #endif
 324         0
 325 };
 326
 327 static struct platform_device bfin_uart1_device = {
 328         .name = "bfin-uart",
 329         .id = 1,
 330         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 331         .resource = bfin_uart1_resources,
 332         .dev = {
 333                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 334         },
 335 };
 336 #endif
 337 #ifdef CONFIG_SERIAL_BFIN_UART2
 338 static struct resource bfin_uart2_resources[] = {
 339         {
 340                 .start = UART2_DLL,
 341                 .end = UART2_RBR+2,
 342                 .flags = IORESOURCE_MEM,
 343         },
 344         {
 345                 .start = IRQ_UART2_RX,
 346                 .end = IRQ_UART2_RX+1,
 347                 .flags = IORESOURCE_IRQ,
 348         },
 349         {
 350                 .start = IRQ_UART2_ERROR,
 351                 .end = IRQ_UART2_ERROR,
 352                 .flags = IORESOURCE_IRQ,
 353         },
 354         {
 355                 .start = CH_UART2_TX,
 356                 .end = CH_UART2_TX,
 357                 .flags = IORESOURCE_DMA,
 358         },
 359         {
 360                 .start = CH_UART2_RX,
 361                 .end = CH_UART2_RX,
 362                 .flags = IORESOURCE_DMA,
 363         },
 364 };
 365
 366 unsigned short bfin_uart2_peripherals[] = {
 367         P_UART2_TX, P_UART2_RX, 0
 368 };
 369
 370 static struct platform_device bfin_uart2_device = {
 371         .name = "bfin-uart",
 372         .id = 2,
 373         .num_resources = ARRAY_SIZE(bfin_uart2_resources),
 374         .resource = bfin_uart2_resources,
 375         .dev = {
 376                 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 377         },
 378 };
 379 #endif
 380 #ifdef CONFIG_SERIAL_BFIN_UART3
 381 static struct resource bfin_uart3_resources[] = {
 382         {
 383                 .start = UART3_DLL,
 384                 .end = UART3_RBR+2,
 385                 .flags = IORESOURCE_MEM,
 386         },
 387         {
 388                 .start = IRQ_UART3_RX,
 389                 .end = IRQ_UART3_RX+1,
 390                 .flags = IORESOURCE_IRQ,
 391         },
 392         {
 393                 .start = IRQ_UART3_ERROR,
 394                 .end = IRQ_UART3_ERROR,
 395                 .flags = IORESOURCE_IRQ,
 396         },
 397         {
 398                 .start = CH_UART3_TX,
 399                 .end = CH_UART3_TX,
 400                 .flags = IORESOURCE_DMA,
 401         },
 402         {
 403                 .start = CH_UART3_RX,
 404                 .end = CH_UART3_RX,
 405                 .flags = IORESOURCE_DMA,
 406         },
 407 #ifdef CONFIG_BFIN_UART3_CTSRTS
 408         {       /* CTS pin -- 0 means not supported */
 409                 .start = GPIO_PB3,
 410                 .end = GPIO_PB3,
 411                 .flags = IORESOURCE_IO,
 412         },
 413         {       /* RTS pin -- 0 means not supported */
 414                 .start = GPIO_PB2,
 415                 .end = GPIO_PB2,
 416                 .flags = IORESOURCE_IO,
 417         },
 418 #endif
 419 };
 420
 421 unsigned short bfin_uart3_peripherals[] = {
 422         P_UART3_TX, P_UART3_RX,
 423 #ifdef CONFIG_BFIN_UART3_CTSRTS
 424         P_UART3_RTS, P_UART3_CTS,
 425 #endif
 426         0
 427 };
 428
 429 static struct platform_device bfin_uart3_device = {
 430         .name = "bfin-uart",
 431         .id = 3,
 432         .num_resources = ARRAY_SIZE(bfin_uart3_resources),
 433         .resource = bfin_uart3_resources,
 434         .dev = {
 435                 .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
 436         },
 437 };
 438 #endif
 439 #endif
 440
 441 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 442 #ifdef CONFIG_BFIN_SIR0
 443 static struct resource bfin_sir0_resources[] = {
 444         {
 445                 .start = 0xFFC00400,
 446                 .end = 0xFFC004FF,
 447                 .flags = IORESOURCE_MEM,
 448         },
 449         {
 450                 .start = IRQ_UART0_RX,
 451                 .end = IRQ_UART0_RX+1,
 452                 .flags = IORESOURCE_IRQ,
 453         },
 454         {
 455                 .start = CH_UART0_RX,
 456                 .end = CH_UART0_RX+1,
 457                 .flags = IORESOURCE_DMA,
 458         },
 459 };
 460 static struct platform_device bfin_sir0_device = {
 461         .name = "bfin_sir",
 462         .id = 0,
 463         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 464         .resource = bfin_sir0_resources,
 465 };
 466 #endif
 467 #ifdef CONFIG_BFIN_SIR1
 468 static struct resource bfin_sir1_resources[] = {
 469         {
 470                 .start = 0xFFC02000,
 471                 .end = 0xFFC020FF,
 472                 .flags = IORESOURCE_MEM,
 473         },
 474         {
 475                 .start = IRQ_UART1_RX,
 476                 .end = IRQ_UART1_RX+1,
 477                 .flags = IORESOURCE_IRQ,
 478         },
 479         {
 480                 .start = CH_UART1_RX,
 481                 .end = CH_UART1_RX+1,
 482                 .flags = IORESOURCE_DMA,
 483         },
 484 };
 485 static struct platform_device bfin_sir1_device = {
 486         .name = "bfin_sir",
 487         .id = 1,
 488         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 489         .resource = bfin_sir1_resources,
 490 };
 491 #endif
 492 #ifdef CONFIG_BFIN_SIR2
 493 static struct resource bfin_sir2_resources[] = {
 494         {
 495                 .start = 0xFFC02100,
 496                 .end = 0xFFC021FF,
 497                 .flags = IORESOURCE_MEM,
 498         },
 499         {
 500                 .start = IRQ_UART2_RX,
 501                 .end = IRQ_UART2_RX+1,
 502                 .flags = IORESOURCE_IRQ,
 503         },
 504         {
 505                 .start = CH_UART2_RX,
 506                 .end = CH_UART2_RX+1,
 507                 .flags = IORESOURCE_DMA,
 508         },
 509 };
 510 static struct platform_device bfin_sir2_device = {
 511         .name = "bfin_sir",
 512         .id = 2,
 513         .num_resources = ARRAY_SIZE(bfin_sir2_resources),
 514         .resource = bfin_sir2_resources,
 515 };
 516 #endif
 517 #ifdef CONFIG_BFIN_SIR3
 518 static struct resource bfin_sir3_resources[] = {
 519         {
 520                 .start = 0xFFC03100,
 521                 .end = 0xFFC031FF,
 522                 .flags = IORESOURCE_MEM,
 523         },
 524         {
 525                 .start = IRQ_UART3_RX,
 526                 .end = IRQ_UART3_RX+1,
 527                 .flags = IORESOURCE_IRQ,
 528         },
 529         {
 530                 .start = CH_UART3_RX,
 531                 .end = CH_UART3_RX+1,
 532                 .flags = IORESOURCE_DMA,
 533         },
 534 };
 535 static struct platform_device bfin_sir3_device = {
 536         .name = "bfin_sir",
 537         .id = 3,
 538         .num_resources = ARRAY_SIZE(bfin_sir3_resources),
 539         .resource = bfin_sir3_resources,
 540 };
 541 #endif
 542 #endif
 543
 544 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 545 #include <linux/smsc911x.h>
 546
 547 static struct resource smsc911x_resources[] = {
 548         {
 549                 .name = "smsc911x-memory",
 550                 .start = 0x24000000,
 551                 .end = 0x24000000 + 0xFF,
 552                 .flags = IORESOURCE_MEM,
 553         },
 554         {
 555                 .start = IRQ_PE8,
 556                 .end = IRQ_PE8,
 557                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 558         },
 559 };
 560
 561 static struct smsc911x_platform_config smsc911x_config = {
 562         .flags = SMSC911X_USE_32BIT,
 563         .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 564         .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 565         .phy_interface = PHY_INTERFACE_MODE_MII,
 566 };
 567
 568 static struct platform_device smsc911x_device = {
 569         .name = "smsc911x",
 570         .id = 0,
 571         .num_resources = ARRAY_SIZE(smsc911x_resources),
 572         .resource = smsc911x_resources,
 573         .dev = {
 574                 .platform_data = &smsc911x_config,
 575         },
 576 };
 577 #endif
 578
 579 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 580 static struct resource musb_resources[] = {
 581         [0] = {
 582                 .start  = 0xFFC03C00,
 583                 .end    = 0xFFC040FF,
 584                 .flags  = IORESOURCE_MEM,
 585         },
 586         [1] = { /* general IRQ */
 587                 .start  = IRQ_USB_INT0,
 588                 .end    = IRQ_USB_INT0,
 589                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 590         },
 591         [2] = { /* DMA IRQ */
 592                 .start  = IRQ_USB_DMA,
 593                 .end    = IRQ_USB_DMA,
 594                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 595         },
 596 };
 597
 598 static struct musb_hdrc_config musb_config = {
 599         .multipoint     = 0,
 600         .dyn_fifo       = 0,
 601         .soft_con       = 1,
 602         .dma            = 1,
 603         .num_eps        = 8,
 604         .dma_channels   = 8,
 605         .gpio_vrsel     = GPIO_PE7,
 606 };
 607
 608 static struct musb_hdrc_platform_data musb_plat = {
 609 #if defined(CONFIG_USB_MUSB_OTG)
 610         .mode           = MUSB_OTG,
 611 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 612         .mode           = MUSB_HOST,
 613 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 614         .mode           = MUSB_PERIPHERAL,
 615 #endif
 616         .config         = &musb_config,
 617 };
 618
 619 static u64 musb_dmamask = ~(u32)0;
 620
 621 static struct platform_device musb_device = {
 622         .name           = "musb_hdrc",
 623         .id             = 0,
 624         .dev = {
 625                 .dma_mask               = &musb_dmamask,
 626                 .coherent_dma_mask      = 0xffffffff,
 627                 .platform_data          = &musb_plat,
 628         },
 629         .num_resources  = ARRAY_SIZE(musb_resources),
 630         .resource       = musb_resources,
 631 };
 632 #endif
 633
 634 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 635 unsigned short bfin_can_peripherals[] = {
 636         P_CAN0_RX, P_CAN0_TX, 0
 637 };
 638
 639 static struct resource bfin_can_resources[] = {
 640         {
 641                 .start = 0xFFC02A00,
 642                 .end = 0xFFC02FFF,
 643                 .flags = IORESOURCE_MEM,
 644         },
 645         {
 646                 .start = IRQ_CAN0_RX,
 647                 .end = IRQ_CAN0_RX,
 648                 .flags = IORESOURCE_IRQ,
 649         },
 650         {
 651                 .start = IRQ_CAN0_TX,
 652                 .end = IRQ_CAN0_TX,
 653                 .flags = IORESOURCE_IRQ,
 654         },
 655         {
 656                 .start = IRQ_CAN0_ERROR,
 657                 .end = IRQ_CAN0_ERROR,
 658                 .flags = IORESOURCE_IRQ,
 659         },
 660 };
 661
 662 static struct platform_device bfin_can_device = {
 663         .name = "bfin_can",
 664         .num_resources = ARRAY_SIZE(bfin_can_resources),
 665         .resource = bfin_can_resources,
 666         .dev = {
 667                 .platform_data = &bfin_can_peripherals, /* Passed to driver */
 668         },
 669 };
 670 #endif
 671
 672 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 673 static struct resource bfin_atapi_resources[] = {
 674         {
 675                 .start = 0xFFC03800,
 676                 .end = 0xFFC0386F,
 677                 .flags = IORESOURCE_MEM,
 678         },
 679         {
 680                 .start = IRQ_ATAPI_ERR,
 681                 .end = IRQ_ATAPI_ERR,
 682                 .flags = IORESOURCE_IRQ,
 683         },
 684 };
 685
 686 static struct platform_device bfin_atapi_device = {
 687         .name = "pata-bf54x",
 688         .id = -1,
 689         .num_resources = ARRAY_SIZE(bfin_atapi_resources),
 690         .resource = bfin_atapi_resources,
 691 };
 692 #endif
 693
 694 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 695 static struct mtd_partition partition_info[] = {
 696         {
 697                 .name = "linux kernel(nand)",
 698                 .offset = 0,
 699                 .size = 4 * 1024 * 1024,
 700         },
 701         {
 702                 .name = "file system(nand)",
 703                 .offset = MTDPART_OFS_APPEND,
 704                 .size = MTDPART_SIZ_FULL,
 705         },
 706 };
 707
 708 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 709         .page_size = NFC_PG_SIZE_256,
 710         .data_width = NFC_NWIDTH_8,
 711         .partitions = partition_info,
 712         .nr_partitions = ARRAY_SIZE(partition_info),
 713         .rd_dly = 3,
 714         .wr_dly = 3,
 715 };
 716
 717 static struct resource bf5xx_nand_resources[] = {
 718         {
 719                 .start = 0xFFC03B00,
 720                 .end = 0xFFC03B4F,
 721                 .flags = IORESOURCE_MEM,
 722         },
 723         {
 724                 .start = CH_NFC,
 725                 .end = CH_NFC,
 726                 .flags = IORESOURCE_IRQ,
 727         },
 728 };
 729
 730 static struct platform_device bf5xx_nand_device = {
 731         .name = "bf5xx-nand",
 732         .id = 0,
 733         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 734         .resource = bf5xx_nand_resources,
 735         .dev = {
 736                 .platform_data = &bf5xx_nand_platform,
 737         },
 738 };
 739 #endif
 740
 741 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 742
 743 static struct bfin_sd_host bfin_sdh_data = {
 744         .dma_chan = CH_SDH,
 745         .irq_int0 = IRQ_SDH_MASK0,
 746         .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
 747 };
 748
 749 static struct platform_device bf54x_sdh_device = {
 750         .name = "bfin-sdh",
 751         .id = 0,
 752         .dev = {
 753                 .platform_data = &bfin_sdh_data,
 754         },
 755 };
 756 #endif
 757
 758 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 759 static struct mtd_partition ezkit_partitions[] = {
 760         {
 761                 .name       = "bootloader(nor)",
 762                 .size       = 0x40000,
 763                 .offset     = 0,
 764         }, {
 765                 .name       = "linux kernel(nor)",
 766                 .size       = 0x400000,
 767                 .offset     = MTDPART_OFS_APPEND,
 768         }, {
 769                 .name       = "file system(nor)",
 770                 .size       = MTDPART_SIZ_FULL,
 771                 .offset     = MTDPART_OFS_APPEND,
 772         }
 773 };
 774
 775 static struct physmap_flash_data ezkit_flash_data = {
 776         .width      = 2,
 777         .parts      = ezkit_partitions,
 778         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 779 };
 780
 781 static struct resource ezkit_flash_resource = {
 782         .start = 0x20000000,
 783         .end   = 0x21ffffff,
 784         .flags = IORESOURCE_MEM,
 785 };
 786
 787 static struct platform_device ezkit_flash_device = {
 788         .name          = "physmap-flash",
 789         .id            = 0,
 790         .dev = {
 791                 .platform_data = &ezkit_flash_data,
 792         },
 793         .num_resources = 1,
 794         .resource      = &ezkit_flash_resource,
 795 };
 796 #endif
 797
 798 #if defined(CONFIG_MTD_M25P80) \
 799         || defined(CONFIG_MTD_M25P80_MODULE)
 800 /* SPI flash chip (m25p16) */
 801 static struct mtd_partition bfin_spi_flash_partitions[] = {
 802         {
 803                 .name = "bootloader(spi)",
 804                 .size = 0x00040000,
 805                 .offset = 0,
 806                 .mask_flags = MTD_CAP_ROM
 807         }, {
 808                 .name = "linux kernel(spi)",
 809                 .size = MTDPART_SIZ_FULL,
 810                 .offset = MTDPART_OFS_APPEND,
 811         }
 812 };
 813
 814 static struct flash_platform_data bfin_spi_flash_data = {
 815         .name = "m25p80",
 816         .parts = bfin_spi_flash_partitions,
 817         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 818         .type = "m25p16",
 819 };
 820
 821 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 822         .enable_dma = 0,         /* use dma transfer with this chip*/
 823         .bits_per_word = 8,
 824 };
 825 #endif
 826
 827 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 828         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 829 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 830         .enable_dma = 0,
 831         .bits_per_word = 16,
 832 };
 833 #endif
 834
 835 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 836 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 837         .enable_dma = 0,
 838         .bits_per_word = 16,
 839 };
 840
 841 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 842         .model                  = 7877,
 843         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 844         .x_plate_ohms           = 419,
 845         .y_plate_ohms           = 486,
 846         .pressure_max           = 1000,
 847         .pressure_min           = 0,
 848         .stopacq_polarity       = 1,
 849         .first_conversion_delay = 3,
 850         .acquisition_time       = 1,
 851         .averaging              = 1,
 852         .pen_down_acc_interval  = 1,
 853 };
 854 #endif
 855
 856 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 857 static struct bfin5xx_spi_chip spidev_chip_info = {
 858         .enable_dma = 0,
 859         .bits_per_word = 8,
 860 };
 861 #endif
 862
 863 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
 864 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
 865         .enable_dma = 0,         /* use dma transfer with this chip*/
 866         .bits_per_word = 8,
 867 };
 868 #endif
 869
 870 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 871 #if defined(CONFIG_MTD_M25P80) \
 872         || defined(CONFIG_MTD_M25P80_MODULE)
 873         {
 874                 /* the modalias must be the same as spi device driver name */
 875                 .modalias = "m25p80", /* Name of spi_driver for this device */
 876                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 877                 .bus_num = 0, /* Framework bus number */
 878                 .chip_select = 1, /* SPI_SSEL1*/
 879                 .platform_data = &bfin_spi_flash_data,
 880                 .controller_data = &spi_flash_chip_info,
 881                 .mode = SPI_MODE_3,
 882         },
 883 #endif
 884 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 885         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 886         {
 887                 .modalias = "ad1836",
 888                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 889                 .bus_num = 1,
 890                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 891                 .controller_data = &ad1836_spi_chip_info,
 892         },
 893 #endif
 894 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 895         {
 896                 .modalias               = "ad7877",
 897                 .platform_data          = &bfin_ad7877_ts_info,
 898                 .irq                    = IRQ_PB4,      /* old boards (<=Rev 1.3) use IRQ_PJ11 */
 899                 .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
 900                 .bus_num                = 0,
 901                 .chip_select            = 2,
 902                 .controller_data = &spi_ad7877_chip_info,
 903         },
 904 #endif
 905 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 906         {
 907                 .modalias = "spidev",
 908                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 909                 .bus_num = 0,
 910                 .chip_select = 1,
 911                 .controller_data = &spidev_chip_info,
 912         },
 913 #endif
 914 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
 915         {
 916                 .modalias               = "adxl34x",
 917                 .platform_data          = &adxl34x_info,
 918                 .irq                    = IRQ_PC5,
 919                 .max_speed_hz           = 5000000,     /* max spi clock (SCK) speed in HZ */
 920                 .bus_num                = 1,
 921                 .chip_select            = 2,
 922                 .controller_data = &spi_adxl34x_chip_info,
 923                 .mode = SPI_MODE_3,
 924         },
 925 #endif
 926 };
 927 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 928 /* SPI (0) */
 929 static struct resource bfin_spi0_resource[] = {
 930         [0] = {
 931                 .start = SPI0_REGBASE,
 932                 .end   = SPI0_REGBASE + 0xFF,
 933                 .flags = IORESOURCE_MEM,
 934         },
 935         [1] = {
 936                 .start = CH_SPI0,
 937                 .end   = CH_SPI0,
 938                 .flags = IORESOURCE_DMA,
 939         },
 940         [2] = {
 941                 .start = IRQ_SPI0,
 942                 .end   = IRQ_SPI0,
 943                 .flags = IORESOURCE_IRQ,
 944         }
 945 };
 946
 947 /* SPI (1) */
 948 static struct resource bfin_spi1_resource[] = {
 949         [0] = {
 950                 .start = SPI1_REGBASE,
 951                 .end   = SPI1_REGBASE + 0xFF,
 952                 .flags = IORESOURCE_MEM,
 953         },
 954         [1] = {
 955                 .start = CH_SPI1,
 956                 .end   = CH_SPI1,
 957                 .flags = IORESOURCE_DMA,
 958         },
 959         [2] = {
 960                 .start = IRQ_SPI1,
 961                 .end   = IRQ_SPI1,
 962                 .flags = IORESOURCE_IRQ,
 963         }
 964 };
 965
 966 /* SPI controller data */
 967 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
 968         .num_chipselect = 3,
 969         .enable_dma = 1,  /* master has the ability to do dma transfer */
 970         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 971 };
 972
 973 static struct platform_device bf54x_spi_master0 = {
 974         .name = "bfin-spi",
 975         .id = 0, /* Bus number */
 976         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 977         .resource = bfin_spi0_resource,
 978         .dev = {
 979                 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
 980                 },
 981 };
 982
 983 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
 984         .num_chipselect = 3,
 985         .enable_dma = 1,  /* master has the ability to do dma transfer */
 986         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 987 };
 988
 989 static struct platform_device bf54x_spi_master1 = {
 990         .name = "bfin-spi",
 991         .id = 1, /* Bus number */
 992         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
 993         .resource = bfin_spi1_resource,
 994         .dev = {
 995                 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
 996                 },
 997 };
 998 #endif  /* spi master and devices */
 999
1000 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1001 static struct resource bfin_twi0_resource[] = {
1002         [0] = {
1003                 .start = TWI0_REGBASE,
1004                 .end   = TWI0_REGBASE + 0xFF,
1005                 .flags = IORESOURCE_MEM,
1006         },
1007         [1] = {
1008                 .start = IRQ_TWI0,
1009                 .end   = IRQ_TWI0,
1010                 .flags = IORESOURCE_IRQ,
1011         },
1012 };
1013
1014 static struct platform_device i2c_bfin_twi0_device = {
1015         .name = "i2c-bfin-twi",
1016         .id = 0,
1017         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1018         .resource = bfin_twi0_resource,
1019 };
1020
1021 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1022 static struct resource bfin_twi1_resource[] = {
1023         [0] = {
1024                 .start = TWI1_REGBASE,
1025                 .end   = TWI1_REGBASE + 0xFF,
1026                 .flags = IORESOURCE_MEM,
1027         },
1028         [1] = {
1029                 .start = IRQ_TWI1,
1030                 .end   = IRQ_TWI1,
1031                 .flags = IORESOURCE_IRQ,
1032         },
1033 };
1034
1035 static struct platform_device i2c_bfin_twi1_device = {
1036         .name = "i2c-bfin-twi",
1037         .id = 1,
1038         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
1039         .resource = bfin_twi1_resource,
1040 };
1041 #endif
1042 #endif
1043
1044 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
1045 };
1046
1047 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1048 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
1049 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1050         {
1051                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1052         },
1053 #endif
1054 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1055         {
1056                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1057                 .irq = 212,
1058         },
1059 #endif
1060 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1061         {
1062                 I2C_BOARD_INFO("adxl34x", 0x53),
1063                 .irq = IRQ_PC5,
1064                 .platform_data = (void *)&adxl34x_info,
1065         },
1066 #endif
1067 };
1068 #endif
1069
1070 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1071 #include <linux/gpio_keys.h>
1072
1073 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1074         {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
1075         {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
1076         {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
1077         {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
1078 };
1079
1080 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1081         .buttons        = bfin_gpio_keys_table,
1082         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1083 };
1084
1085 static struct platform_device bfin_device_gpiokeys = {
1086         .name      = "gpio-keys",
1087         .dev = {
1088                 .platform_data = &bfin_gpio_keys_data,
1089         },
1090 };
1091 #endif
1092
1093 static const unsigned int cclk_vlev_datasheet[] =
1094 {
1095 /*
1096  * Internal VLEV BF54XSBBC1533
1097  ****temporarily using these values until data sheet is updated
1098  */
1099         VRPAIR(VLEV_085, 150000000),
1100         VRPAIR(VLEV_090, 250000000),
1101         VRPAIR(VLEV_110, 276000000),
1102         VRPAIR(VLEV_115, 301000000),
1103         VRPAIR(VLEV_120, 525000000),
1104         VRPAIR(VLEV_125, 550000000),
1105         VRPAIR(VLEV_130, 600000000),
1106 };
1107
1108 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1109         .tuple_tab = cclk_vlev_datasheet,
1110         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1111         .vr_settling_time = 25 /* us */,
1112 };
1113
1114 static struct platform_device bfin_dpmc = {
1115         .name = "bfin dpmc",
1116         .dev = {
1117                 .platform_data = &bfin_dmpc_vreg_data,
1118         },
1119 };
1120
1121 static struct platform_device *ezkit_devices[] __initdata = {
1122
1123         &bfin_dpmc,
1124
1125 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1126         &rtc_device,
1127 #endif
1128
1129 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1130 #ifdef CONFIG_SERIAL_BFIN_UART0
1131         &bfin_uart0_device,
1132 #endif
1133 #ifdef CONFIG_SERIAL_BFIN_UART1
1134         &bfin_uart1_device,
1135 #endif
1136 #ifdef CONFIG_SERIAL_BFIN_UART2
1137         &bfin_uart2_device,
1138 #endif
1139 #ifdef CONFIG_SERIAL_BFIN_UART3
1140         &bfin_uart3_device,
1141 #endif
1142 #endif
1143
1144 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1145 #ifdef CONFIG_BFIN_SIR0
1146         &bfin_sir0_device,
1147 #endif
1148 #ifdef CONFIG_BFIN_SIR1
1149         &bfin_sir1_device,
1150 #endif
1151 #ifdef CONFIG_BFIN_SIR2
1152         &bfin_sir2_device,
1153 #endif
1154 #ifdef CONFIG_BFIN_SIR3
1155         &bfin_sir3_device,
1156 #endif
1157 #endif
1158
1159 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
1160         &bf54x_lq043_device,
1161 #endif
1162
1163 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
1164         &smsc911x_device,
1165 #endif
1166
1167 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1168         &musb_device,
1169 #endif
1170
1171 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1172         &bfin_isp1760_device,
1173 #endif
1174
1175 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
1176         &bfin_can_device,
1177 #endif
1178
1179 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
1180         &bfin_atapi_device,
1181 #endif
1182
1183 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1184         &bf5xx_nand_device,
1185 #endif
1186
1187 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
1188         &bf54x_sdh_device,
1189 #endif
1190
1191 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1192         &bf54x_spi_master0,
1193         &bf54x_spi_master1,
1194 #endif
1195
1196 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
1197         &bf54x_kpad_device,
1198 #endif
1199
1200 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1201         &bfin_rotary_device,
1202 #endif
1203
1204 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1205         &i2c_bfin_twi0_device,
1206 #if !defined(CONFIG_BF542)
1207         &i2c_bfin_twi1_device,
1208 #endif
1209 #endif
1210
1211 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1212         &bfin_device_gpiokeys,
1213 #endif
1214
1215 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1216         &ezkit_flash_device,
1217 #endif
1218 };
1219
1220 static int __init ezkit_init(void)
1221 {
1222         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1223
1224         i2c_register_board_info(0, bfin_i2c_board_info0,
1225                                 ARRAY_SIZE(bfin_i2c_board_info0));
1226 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1227         i2c_register_board_info(1, bfin_i2c_board_info1,
1228                                 ARRAY_SIZE(bfin_i2c_board_info1));
1229 #endif
1230
1231         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
1232
1233         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1234
1235         return 0;
1236 }
1237
1238 arch_initcall(ezkit_init);