arch/arm/mm/mmu.c

   1 /*
   2  *  linux/arch/arm/mm/mmu.c
   3  *
   4  *  Copyright (C) 1995-2005 Russell King
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #include <linux/module.h>
  11 #include <linux/kernel.h>
  12 #include <linux/errno.h>
  13 #include <linux/init.h>
  14 #include <linux/mman.h>
  15 #include <linux/nodemask.h>
  16 #include <linux/memblock.h>
  17 #include <linux/fs.h>
  18 #include <linux/vmalloc.h>
  19 #include <linux/sizes.h>
  20
  21 #include <asm/cp15.h>
  22 #include <asm/cputype.h>
  23 #include <asm/sections.h>
  24 #include <asm/cachetype.h>
  25 #include <asm/setup.h>
  26 #include <asm/smp_plat.h>
  27 #include <asm/tlb.h>
  28 #include <asm/highmem.h>
  29 #include <asm/system_info.h>
  30 #include <asm/traps.h>
  31
  32 #include <asm/mach/arch.h>
  33 #include <asm/mach/map.h>
  34
  35 #include "mm.h"
  36
  37 /*
  38  * empty_zero_page is a special page that is used for
  39  * zero-initialized data and COW.
  40  */
  41 struct page *empty_zero_page;
  42 EXPORT_SYMBOL(empty_zero_page);
  43
  44 /*
  45  * The pmd table for the upper-most set of pages.
  46  */
  47 pmd_t *top_pmd;
  48
  49 #define CPOLICY_UNCACHED        0
  50 #define CPOLICY_BUFFERED        1
  51 #define CPOLICY_WRITETHROUGH    2
  52 #define CPOLICY_WRITEBACK       3
  53 #define CPOLICY_WRITEALLOC      4
  54
  55 static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
  56 static unsigned int ecc_mask __initdata = 0;
  57 pgprot_t pgprot_user;
  58 pgprot_t pgprot_kernel;
  59
  60 EXPORT_SYMBOL(pgprot_user);
  61 EXPORT_SYMBOL(pgprot_kernel);
  62
  63 struct cachepolicy {
  64         const char      policy[16];
  65         unsigned int    cr_mask;
  66         pmdval_t        pmd;
  67         pteval_t        pte;
  68 };
  69
  70 static struct cachepolicy cache_policies[] __initdata = {
  71         {
  72                 .policy         = "uncached",
  73                 .cr_mask        = CR_W|CR_C,
  74                 .pmd            = PMD_SECT_UNCACHED,
  75                 .pte            = L_PTE_MT_UNCACHED,
  76         }, {
  77                 .policy         = "buffered",
  78                 .cr_mask        = CR_C,
  79                 .pmd            = PMD_SECT_BUFFERED,
  80                 .pte            = L_PTE_MT_BUFFERABLE,
  81         }, {
  82                 .policy         = "writethrough",
  83                 .cr_mask        = 0,
  84                 .pmd            = PMD_SECT_WT,
  85                 .pte            = L_PTE_MT_WRITETHROUGH,
  86         }, {
  87                 .policy         = "writeback",
  88                 .cr_mask        = 0,
  89                 .pmd            = PMD_SECT_WB,
  90                 .pte            = L_PTE_MT_WRITEBACK,
  91         }, {
  92                 .policy         = "writealloc",
  93                 .cr_mask        = 0,
  94                 .pmd            = PMD_SECT_WBWA,
  95                 .pte            = L_PTE_MT_WRITEALLOC,
  96         }
  97 };
  98
  99 /*
 100  * These are useful for identifying cache coherency
 101  * problems by allowing the cache or the cache and
 102  * writebuffer to be turned off.  (Note: the write
 103  * buffer should not be on and the cache off).
 104  */
 105 static int __init early_cachepolicy(char *p)
 106 {
 107         int i;
 108
 109         for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
 110                 int len = strlen(cache_policies[i].policy);
 111
 112                 if (memcmp(p, cache_policies[i].policy, len) == 0) {
 113                         cachepolicy = i;
 114                         cr_alignment &= ~cache_policies[i].cr_mask;
 115                         cr_no_alignment &= ~cache_policies[i].cr_mask;
 116                         break;
 117                 }
 118         }
 119         if (i == ARRAY_SIZE(cache_policies))
 120                 printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
 121         /*
 122          * This restriction is partly to do with the way we boot; it is
 123          * unpredictable to have memory mapped using two different sets of
 124          * memory attributes (shared, type, and cache attribs).  We can not
 125          * change these attributes once the initial assembly has setup the
 126          * page tables.
 127          */
 128         if (cpu_architecture() >= CPU_ARCH_ARMv6) {
 129                 printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
 130                 cachepolicy = CPOLICY_WRITEBACK;
 131         }
 132         flush_cache_all();
 133         set_cr(cr_alignment);
 134         return 0;
 135 }
 136 early_param("cachepolicy", early_cachepolicy);
 137
 138 static int __init early_nocache(char *__unused)
 139 {
 140         char *p = "buffered";
 141         printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
 142         early_cachepolicy(p);
 143         return 0;
 144 }
 145 early_param("nocache", early_nocache);
 146
 147 static int __init early_nowrite(char *__unused)
 148 {
 149         char *p = "uncached";
 150         printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
 151         early_cachepolicy(p);
 152         return 0;
 153 }
 154 early_param("nowb", early_nowrite);
 155
 156 #ifndef CONFIG_ARM_LPAE
 157 static int __init early_ecc(char *p)
 158 {
 159         if (memcmp(p, "on", 2) == 0)
 160                 ecc_mask = PMD_PROTECTION;
 161         else if (memcmp(p, "off", 3) == 0)
 162                 ecc_mask = 0;
 163         return 0;
 164 }
 165 early_param("ecc", early_ecc);
 166 #endif
 167
 168 static int __init noalign_setup(char *__unused)
 169 {
 170         cr_alignment &= ~CR_A;
 171         cr_no_alignment &= ~CR_A;
 172         set_cr(cr_alignment);
 173         return 1;
 174 }
 175 __setup("noalign", noalign_setup);
 176
 177 #ifndef CONFIG_SMP
 178 void adjust_cr(unsigned long mask, unsigned long set)
 179 {
 180         unsigned long flags;
 181
 182         mask &= ~CR_A;
 183
 184         set &= mask;
 185
 186         local_irq_save(flags);
 187
 188         cr_no_alignment = (cr_no_alignment & ~mask) | set;
 189         cr_alignment = (cr_alignment & ~mask) | set;
 190
 191         set_cr((get_cr() & ~mask) | set);
 192
 193         local_irq_restore(flags);
 194 }
 195 #endif
 196
 197 #define PROT_PTE_DEVICE         L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
 198 #define PROT_SECT_DEVICE        PMD_TYPE_SECT|PMD_SECT_AP_WRITE
 199
 200 static struct mem_type mem_types[] = {
 201         [MT_DEVICE] = {           /* Strongly ordered / ARMv6 shared device */
 202                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
 203                                   L_PTE_SHARED,
 204                 .prot_l1        = PMD_TYPE_TABLE,
 205                 .prot_sect      = PROT_SECT_DEVICE | PMD_SECT_S,
 206                 .domain         = DOMAIN_IO,
 207         },
 208         [MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
 209                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
 210                 .prot_l1        = PMD_TYPE_TABLE,
 211                 .prot_sect      = PROT_SECT_DEVICE,
 212                 .domain         = DOMAIN_IO,
 213         },
 214         [MT_DEVICE_CACHED] = {    /* ioremap_cached */
 215                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED,
 216                 .prot_l1        = PMD_TYPE_TABLE,
 217                 .prot_sect      = PROT_SECT_DEVICE | PMD_SECT_WB,
 218                 .domain         = DOMAIN_IO,
 219         },
 220         [MT_DEVICE_WC] = {      /* ioremap_wc */
 221                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
 222                 .prot_l1        = PMD_TYPE_TABLE,
 223                 .prot_sect      = PROT_SECT_DEVICE,
 224                 .domain         = DOMAIN_IO,
 225         },
 226         [MT_UNCACHED] = {
 227                 .prot_pte       = PROT_PTE_DEVICE,
 228                 .prot_l1        = PMD_TYPE_TABLE,
 229                 .prot_sect      = PMD_TYPE_SECT | PMD_SECT_XN,
 230                 .domain         = DOMAIN_IO,
 231         },
 232         [MT_CACHECLEAN] = {
 233                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 234                 .domain    = DOMAIN_KERNEL,
 235         },
 236 #ifndef CONFIG_ARM_LPAE
 237         [MT_MINICLEAN] = {
 238                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
 239                 .domain    = DOMAIN_KERNEL,
 240         },
 241 #endif
 242         [MT_LOW_VECTORS] = {
 243                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 244                                 L_PTE_RDONLY,
 245                 .prot_l1   = PMD_TYPE_TABLE,
 246                 .domain    = DOMAIN_USER,
 247         },
 248         [MT_HIGH_VECTORS] = {
 249                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 250                                 L_PTE_USER | L_PTE_RDONLY,
 251                 .prot_l1   = PMD_TYPE_TABLE,
 252                 .domain    = DOMAIN_USER,
 253         },
 254         [MT_MEMORY] = {
 255                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 256                 .prot_l1   = PMD_TYPE_TABLE,
 257                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 258                 .domain    = DOMAIN_KERNEL,
 259         },
 260         [MT_ROM] = {
 261                 .prot_sect = PMD_TYPE_SECT,
 262                 .domain    = DOMAIN_KERNEL,
 263         },
 264         [MT_MEMORY_NONCACHED] = {
 265                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 266                                 L_PTE_MT_BUFFERABLE,
 267                 .prot_l1   = PMD_TYPE_TABLE,
 268                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 269                 .domain    = DOMAIN_KERNEL,
 270         },
 271         [MT_MEMORY_DTCM] = {
 272                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 273                                 L_PTE_XN,
 274                 .prot_l1   = PMD_TYPE_TABLE,
 275                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 276                 .domain    = DOMAIN_KERNEL,
 277         },
 278         [MT_MEMORY_ITCM] = {
 279                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 280                 .prot_l1   = PMD_TYPE_TABLE,
 281                 .domain    = DOMAIN_KERNEL,
 282         },
 283         [MT_MEMORY_SO] = {
 284                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 285                                 L_PTE_MT_UNCACHED,
 286                 .prot_l1   = PMD_TYPE_TABLE,
 287                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
 288                                 PMD_SECT_UNCACHED | PMD_SECT_XN,
 289                 .domain    = DOMAIN_KERNEL,
 290         },
 291         [MT_MEMORY_DMA_READY] = {
 292                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 293                 .prot_l1   = PMD_TYPE_TABLE,
 294                 .domain    = DOMAIN_KERNEL,
 295         },
 296 };
 297
 298 const struct mem_type *get_mem_type(unsigned int type)
 299 {
 300         return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
 301 }
 302 EXPORT_SYMBOL(get_mem_type);
 303
 304 /*
 305  * Adjust the PMD section entries according to the CPU in use.
 306  */
 307 static void __init build_mem_type_table(void)
 308 {
 309         struct cachepolicy *cp;
 310         unsigned int cr = get_cr();
 311         pteval_t user_pgprot, kern_pgprot, vecs_pgprot;
 312         int cpu_arch = cpu_architecture();
 313         int i;
 314
 315         if (cpu_arch < CPU_ARCH_ARMv6) {
 316 #if defined(CONFIG_CPU_DCACHE_DISABLE)
 317                 if (cachepolicy > CPOLICY_BUFFERED)
 318                         cachepolicy = CPOLICY_BUFFERED;
 319 #elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
 320                 if (cachepolicy > CPOLICY_WRITETHROUGH)
 321                         cachepolicy = CPOLICY_WRITETHROUGH;
 322 #endif
 323         }
 324         if (cpu_arch < CPU_ARCH_ARMv5) {
 325                 if (cachepolicy >= CPOLICY_WRITEALLOC)
 326                         cachepolicy = CPOLICY_WRITEBACK;
 327                 ecc_mask = 0;
 328         }
 329         if (is_smp())
 330                 cachepolicy = CPOLICY_WRITEALLOC;
 331
 332         /*
 333          * Strip out features not present on earlier architectures.
 334          * Pre-ARMv5 CPUs don't have TEX bits.  Pre-ARMv6 CPUs or those
 335          * without extended page tables don't have the 'Shared' bit.
 336          */
 337         if (cpu_arch < CPU_ARCH_ARMv5)
 338                 for (i = 0; i < ARRAY_SIZE(mem_types); i++)
 339                         mem_types[i].prot_sect &= ~PMD_SECT_TEX(7);
 340         if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3())
 341                 for (i = 0; i < ARRAY_SIZE(mem_types); i++)
 342                         mem_types[i].prot_sect &= ~PMD_SECT_S;
 343
 344         /*
 345          * ARMv5 and lower, bit 4 must be set for page tables (was: cache
 346          * "update-able on write" bit on ARM610).  However, Xscale and
 347          * Xscale3 require this bit to be cleared.
 348          */
 349         if (cpu_is_xscale() || cpu_is_xsc3()) {
 350                 for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 351                         mem_types[i].prot_sect &= ~PMD_BIT4;
 352                         mem_types[i].prot_l1 &= ~PMD_BIT4;
 353                 }
 354         } else if (cpu_arch < CPU_ARCH_ARMv6) {
 355                 for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 356                         if (mem_types[i].prot_l1)
 357                                 mem_types[i].prot_l1 |= PMD_BIT4;
 358                         if (mem_types[i].prot_sect)
 359                                 mem_types[i].prot_sect |= PMD_BIT4;
 360                 }
 361         }
 362
 363         /*
 364          * Mark the device areas according to the CPU/architecture.
 365          */
 366         if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) {
 367                 if (!cpu_is_xsc3()) {
 368                         /*
 369                          * Mark device regions on ARMv6+ as execute-never
 370                          * to prevent speculative instruction fetches.
 371                          */
 372                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN;
 373                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
 374                         mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
 375                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
 376                 }
 377                 if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 378                         /*
 379                          * For ARMv7 with TEX remapping,
 380                          * - shared device is SXCB=1100
 381                          * - nonshared device is SXCB=0100
 382                          * - write combine device mem is SXCB=0001
 383                          * (Uncached Normal memory)
 384                          */
 385                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1);
 386                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1);
 387                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
 388                 } else if (cpu_is_xsc3()) {
 389                         /*
 390                          * For Xscale3,
 391                          * - shared device is TEXCB=00101
 392                          * - nonshared device is TEXCB=01000
 393                          * - write combine device mem is TEXCB=00100
 394                          * (Inner/Outer Uncacheable in xsc3 parlance)
 395                          */
 396                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED;
 397                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
 398                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
 399                 } else {
 400                         /*
 401                          * For ARMv6 and ARMv7 without TEX remapping,
 402                          * - shared device is TEXCB=00001
 403                          * - nonshared device is TEXCB=01000
 404                          * - write combine device mem is TEXCB=00100
 405                          * (Uncached Normal in ARMv6 parlance).
 406                          */
 407                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
 408                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
 409                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
 410                 }
 411         } else {
 412                 /*
 413                  * On others, write combining is "Uncached/Buffered"
 414                  */
 415                 mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
 416         }
 417
 418         /*
 419          * Now deal with the memory-type mappings
 420          */
 421         cp = &cache_policies[cachepolicy];
 422         vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 423
 424         /*
 425          * Enable CPU-specific coherency if supported.
 426          * (Only available on XSC3 at the moment.)
 427          */
 428         if (arch_is_coherent() && cpu_is_xsc3()) {
 429                 mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 430                 mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
 431                 mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 432                 mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 433                 mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 434         }
 435         /*
 436          * ARMv6 and above have extended page tables.
 437          */
 438         if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
 439 #ifndef CONFIG_ARM_LPAE
 440                 /*
 441                  * Mark cache clean areas and XIP ROM read only
 442                  * from SVC mode and no access from userspace.
 443                  */
 444                 mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 445                 mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 446                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 447 #endif
 448
 449                 if (is_smp()) {
 450                         /*
 451                          * Mark memory with the "shared" attribute
 452                          * for SMP systems
 453                          */
 454                         user_pgprot |= L_PTE_SHARED;
 455                         kern_pgprot |= L_PTE_SHARED;
 456                         vecs_pgprot |= L_PTE_SHARED;
 457                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
 458                         mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
 459                         mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
 460                         mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 461                         mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 462                         mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
 463                         mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 464                         mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 465                         mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 466                 }
 467         }
 468
 469         /*
 470          * Non-cacheable Normal - intended for memory areas that must
 471          * not cause dirty cache line writebacks when used
 472          */
 473         if (cpu_arch >= CPU_ARCH_ARMv6) {
 474                 if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 475                         /* Non-cacheable Normal is XCB = 001 */
 476                         mem_types[MT_MEMORY_NONCACHED].prot_sect |=
 477                                 PMD_SECT_BUFFERED;
 478                 } else {
 479                         /* For both ARMv6 and non-TEX-remapping ARMv7 */
 480                         mem_types[MT_MEMORY_NONCACHED].prot_sect |=
 481                                 PMD_SECT_TEX(1);
 482                 }
 483         } else {
 484                 mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
 485         }
 486
 487 #ifdef CONFIG_ARM_LPAE
 488         /*
 489          * Do not generate access flag faults for the kernel mappings.
 490          */
 491         for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 492                 mem_types[i].prot_pte |= PTE_EXT_AF;
 493                 if (mem_types[i].prot_sect)
 494                         mem_types[i].prot_sect |= PMD_SECT_AF;
 495         }
 496         kern_pgprot |= PTE_EXT_AF;
 497         vecs_pgprot |= PTE_EXT_AF;
 498 #endif
 499
 500         for (i = 0; i < 16; i++) {
 501                 unsigned long v = pgprot_val(protection_map[i]);
 502                 protection_map[i] = __pgprot(v | user_pgprot);
 503         }
 504
 505         mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
 506         mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
 507
 508         pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
 509         pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
 510                                  L_PTE_DIRTY | kern_pgprot);
 511
 512         mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 513         mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 514         mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
 515         mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
 516         mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 517         mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
 518         mem_types[MT_ROM].prot_sect |= cp->pmd;
 519
 520         switch (cp->pmd) {
 521         case PMD_SECT_WT:
 522                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
 523                 break;
 524         case PMD_SECT_WB:
 525         case PMD_SECT_WBWA:
 526                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
 527                 break;
 528         }
 529         printk("Memory policy: ECC %sabled, Data cache %s\n",
 530                 ecc_mask ? "en" : "dis", cp->policy);
 531
 532         for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 533                 struct mem_type *t = &mem_types[i];
 534                 if (t->prot_l1)
 535                         t->prot_l1 |= PMD_DOMAIN(t->domain);
 536                 if (t->prot_sect)
 537                         t->prot_sect |= PMD_DOMAIN(t->domain);
 538         }
 539 }
 540
 541 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 542 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 543                               unsigned long size, pgprot_t vma_prot)
 544 {
 545         if (!pfn_valid(pfn))
 546                 return pgprot_noncached(vma_prot);
 547         else if (file->f_flags & O_SYNC)
 548                 return pgprot_writecombine(vma_prot);
 549         return vma_prot;
 550 }
 551 EXPORT_SYMBOL(phys_mem_access_prot);
 552 #endif
 553
 554 #define vectors_base()  (vectors_high() ? 0xffff0000 : 0)
 555
 556 static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
 557 {
 558         void *ptr = __va(memblock_alloc(sz, align));
 559         memset(ptr, 0, sz);
 560         return ptr;
 561 }
 562
 563 static void __init *early_alloc(unsigned long sz)
 564 {
 565         return early_alloc_aligned(sz, sz);
 566 }
 567
 568 static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
 569 {
 570         if (pmd_none(*pmd)) {
 571                 pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
 572                 __pmd_populate(pmd, __pa(pte), prot);
 573         }
 574         BUG_ON(pmd_bad(*pmd));
 575         return pte_offset_kernel(pmd, addr);
 576 }
 577
 578 static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 579                                   unsigned long end, unsigned long pfn,
 580                                   const struct mem_type *type)
 581 {
 582         pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
 583         do {
 584                 set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
 585                 pfn++;
 586         } while (pte++, addr += PAGE_SIZE, addr != end);
 587 }
 588
 589 static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 590                                       unsigned long end, phys_addr_t phys,
 591                                       const struct mem_type *type)
 592 {
 593         pmd_t *pmd = pmd_offset(pud, addr);
 594
 595         /*
 596          * Try a section mapping - end, addr and phys must all be aligned
 597          * to a section boundary.  Note that PMDs refer to the individual
 598          * L1 entries, whereas PGDs refer to a group of L1 entries making
 599          * up one logical pointer to an L2 table.
 600          */
 601         if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
 602                 pmd_t *p = pmd;
 603
 604 #ifndef CONFIG_ARM_LPAE
 605                 if (addr & SECTION_SIZE)
 606                         pmd++;
 607 #endif
 608
 609                 do {
 610                         *pmd = __pmd(phys | type->prot_sect);
 611                         phys += SECTION_SIZE;
 612                 } while (pmd++, addr += SECTION_SIZE, addr != end);
 613
 614                 flush_pmd_entry(p);
 615         } else {
 616                 /*
 617                  * No need to loop; pte's aren't interested in the
 618                  * individual L1 entries.
 619                  */
 620                 alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
 621         }
 622 }
 623
 624 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 625         unsigned long end, unsigned long phys, const struct mem_type *type)
 626 {
 627         pud_t *pud = pud_offset(pgd, addr);
 628         unsigned long next;
 629
 630         do {
 631                 next = pud_addr_end(addr, end);
 632                 alloc_init_section(pud, addr, next, phys, type);
 633                 phys += next - addr;
 634         } while (pud++, addr = next, addr != end);
 635 }
 636
 637 #ifndef CONFIG_ARM_LPAE
 638 static void __init create_36bit_mapping(struct map_desc *md,
 639                                         const struct mem_type *type)
 640 {
 641         unsigned long addr, length, end;
 642         phys_addr_t phys;
 643         pgd_t *pgd;
 644
 645         addr = md->virtual;
 646         phys = __pfn_to_phys(md->pfn);
 647         length = PAGE_ALIGN(md->length);
 648
 649         if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) {
 650                 printk(KERN_ERR "MM: CPU does not support supersection "
 651                        "mapping for 0x%08llx at 0x%08lx\n",
 652                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 653                 return;
 654         }
 655
 656         /* N.B. ARMv6 supersections are only defined to work with domain 0.
 657          *      Since domain assignments can in fact be arbitrary, the
 658          *      'domain == 0' check below is required to insure that ARMv6
 659          *      supersections are only allocated for domain 0 regardless
 660          *      of the actual domain assignments in use.
 661          */
 662         if (type->domain) {
 663                 printk(KERN_ERR "MM: invalid domain in supersection "
 664                        "mapping for 0x%08llx at 0x%08lx\n",
 665                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 666                 return;
 667         }
 668
 669         if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) {
 670                 printk(KERN_ERR "MM: cannot create mapping for 0x%08llx"
 671                        " at 0x%08lx invalid alignment\n",
 672                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 673                 return;
 674         }
 675
 676         /*
 677          * Shift bits [35:32] of address into bits [23:20] of PMD
 678          * (See ARMv6 spec).
 679          */
 680         phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
 681
 682         pgd = pgd_offset_k(addr);
 683         end = addr + length;
 684         do {
 685                 pud_t *pud = pud_offset(pgd, addr);
 686                 pmd_t *pmd = pmd_offset(pud, addr);
 687                 int i;
 688
 689                 for (i = 0; i < 16; i++)
 690                         *pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER);
 691
 692                 addr += SUPERSECTION_SIZE;
 693                 phys += SUPERSECTION_SIZE;
 694                 pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
 695         } while (addr != end);
 696 }
 697 #endif  /* !CONFIG_ARM_LPAE */
 698
 699 /*
 700  * Create the page directory entries and any necessary
 701  * page tables for the mapping specified by `md'.  We
 702  * are able to cope here with varying sizes and address
 703  * offsets, and we take full advantage of sections and
 704  * supersections.
 705  */
 706 static void __init create_mapping(struct map_desc *md)
 707 {
 708         unsigned long addr, length, end;
 709         phys_addr_t phys;
 710         const struct mem_type *type;
 711         pgd_t *pgd;
 712
 713         if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
 714                 printk(KERN_WARNING "BUG: not creating mapping for 0x%08llx"
 715                        " at 0x%08lx in user region\n",
 716                        (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
 717                 return;
 718         }
 719
 720         if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
 721             md->virtual >= PAGE_OFFSET &&
 722             (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
 723                 printk(KERN_WARNING "BUG: mapping for 0x%08llx"
 724                        " at 0x%08lx out of vmalloc space\n",
 725                        (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
 726         }
 727
 728         type = &mem_types[md->type];
 729
 730 #ifndef CONFIG_ARM_LPAE
 731         /*
 732          * Catch 36-bit addresses
 733          */
 734         if (md->pfn >= 0x100000) {
 735                 create_36bit_mapping(md, type);
 736                 return;
 737         }
 738 #endif
 739
 740         addr = md->virtual & PAGE_MASK;
 741         phys = __pfn_to_phys(md->pfn);
 742         length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
 743
 744         if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
 745                 printk(KERN_WARNING "BUG: map for 0x%08llx at 0x%08lx can not "
 746                        "be mapped using pages, ignoring.\n",
 747                        (long long)__pfn_to_phys(md->pfn), addr);
 748                 return;
 749         }
 750
 751         pgd = pgd_offset_k(addr);
 752         end = addr + length;
 753         do {
 754                 unsigned long next = pgd_addr_end(addr, end);
 755
 756                 alloc_init_pud(pgd, addr, next, phys, type);
 757
 758                 phys += next - addr;
 759                 addr = next;
 760         } while (pgd++, addr != end);
 761 }
 762
 763 /*
 764  * Create the architecture specific mappings
 765  */
 766 void __init iotable_init(struct map_desc *io_desc, int nr)
 767 {
 768         struct map_desc *md;
 769         struct vm_struct *vm;
 770
 771         if (!nr)
 772                 return;
 773
 774         vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm));
 775
 776         for (md = io_desc; nr; md++, nr--) {
 777                 create_mapping(md);
 778                 vm->addr = (void *)(md->virtual & PAGE_MASK);
 779                 vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
 780                 vm->phys_addr = __pfn_to_phys(md->pfn);
 781                 vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
 782                 vm->flags |= VM_ARM_MTYPE(md->type);
 783                 vm->caller = iotable_init;
 784                 vm_area_add_early(vm++);
 785         }
 786 }
 787
 788 #ifndef CONFIG_ARM_LPAE
 789
 790 /*
 791  * The Linux PMD is made of two consecutive section entries covering 2MB
 792  * (see definition in include/asm/pgtable-2level.h).  However a call to
 793  * create_mapping() may optimize static mappings by using individual
 794  * 1MB section mappings.  This leaves the actual PMD potentially half
 795  * initialized if the top or bottom section entry isn't used, leaving it
 796  * open to problems if a subsequent ioremap() or vmalloc() tries to use
 797  * the virtual space left free by that unused section entry.
 798  *
 799  * Let's avoid the issue by inserting dummy vm entries covering the unused
 800  * PMD halves once the static mappings are in place.
 801  */
 802
 803 static void __init pmd_empty_section_gap(unsigned long addr)
 804 {
 805         struct vm_struct *vm;
 806
 807         vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
 808         vm->addr = (void *)addr;
 809         vm->size = SECTION_SIZE;
 810         vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
 811         vm->caller = pmd_empty_section_gap;
 812         vm_area_add_early(vm);
 813 }
 814
 815 static void __init fill_pmd_gaps(void)
 816 {
 817         struct vm_struct *vm;
 818         unsigned long addr, next = 0;
 819         pmd_t *pmd;
 820
 821         /* we're still single threaded hence no lock needed here */
 822         for (vm = vmlist; vm; vm = vm->next) {
 823                 if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
 824                         continue;
 825                 addr = (unsigned long)vm->addr;
 826                 if (addr < next)
 827                         continue;
 828
 829                 /*
 830                  * Check if this vm starts on an odd section boundary.
 831                  * If so and the first section entry for this PMD is free
 832                  * then we block the corresponding virtual address.
 833                  */
 834                 if ((addr & ~PMD_MASK) == SECTION_SIZE) {
 835                         pmd = pmd_off_k(addr);
 836                         if (pmd_none(*pmd))
 837                                 pmd_empty_section_gap(addr & PMD_MASK);
 838                 }
 839
 840                 /*
 841                  * Then check if this vm ends on an odd section boundary.
 842                  * If so and the second section entry for this PMD is empty
 843                  * then we block the corresponding virtual address.
 844                  */
 845                 addr += vm->size;
 846                 if ((addr & ~PMD_MASK) == SECTION_SIZE) {
 847                         pmd = pmd_off_k(addr) + 1;
 848                         if (pmd_none(*pmd))
 849                                 pmd_empty_section_gap(addr);
 850                 }
 851
 852                 /* no need to look at any vm entry until we hit the next PMD */
 853                 next = (addr + PMD_SIZE - 1) & PMD_MASK;
 854         }
 855 }
 856
 857 #else
 858 #define fill_pmd_gaps() do { } while (0)
 859 #endif
 860
 861 static void * __initdata vmalloc_min =
 862         (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
 863
 864 /*
 865  * vmalloc=size forces the vmalloc area to be exactly 'size'
 866  * bytes. This can be used to increase (or decrease) the vmalloc
 867  * area - the default is 240m.
 868  */
 869 static int __init early_vmalloc(char *arg)
 870 {
 871         unsigned long vmalloc_reserve = memparse(arg, NULL);
 872
 873         if (vmalloc_reserve < SZ_16M) {
 874                 vmalloc_reserve = SZ_16M;
 875                 printk(KERN_WARNING
 876                         "vmalloc area too small, limiting to %luMB\n",
 877                         vmalloc_reserve >> 20);
 878         }
 879
 880         if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
 881                 vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
 882                 printk(KERN_WARNING
 883                         "vmalloc area is too big, limiting to %luMB\n",
 884                         vmalloc_reserve >> 20);
 885         }
 886
 887         vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
 888         return 0;
 889 }
 890 early_param("vmalloc", early_vmalloc);
 891
 892 phys_addr_t arm_lowmem_limit __initdata = 0;
 893
 894 void __init sanity_check_meminfo(void)
 895 {
 896         int i, j, highmem = 0;
 897
 898         for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 899                 struct membank *bank = &meminfo.bank[j];
 900                 *bank = meminfo.bank[i];
 901
 902                 if (bank->start > ULONG_MAX)
 903                         highmem = 1;
 904
 905 #ifdef CONFIG_HIGHMEM
 906                 if (__va(bank->start) >= vmalloc_min ||
 907                     __va(bank->start) < (void *)PAGE_OFFSET)
 908                         highmem = 1;
 909
 910                 bank->highmem = highmem;
 911
 912                 /*
 913                  * Split those memory banks which are partially overlapping
 914                  * the vmalloc area greatly simplifying things later.
 915                  */
 916                 if (!highmem && __va(bank->start) < vmalloc_min &&
 917                     bank->size > vmalloc_min - __va(bank->start)) {
 918                         if (meminfo.nr_banks >= NR_BANKS) {
 919                                 printk(KERN_CRIT "NR_BANKS too low, "
 920                                                  "ignoring high memory\n");
 921                         } else {
 922                                 memmove(bank + 1, bank,
 923                                         (meminfo.nr_banks - i) * sizeof(*bank));
 924                                 meminfo.nr_banks++;
 925                                 i++;
 926                                 bank[1].size -= vmalloc_min - __va(bank->start);
 927                                 bank[1].start = __pa(vmalloc_min - 1) + 1;
 928                                 bank[1].highmem = highmem = 1;
 929                                 j++;
 930                         }
 931                         bank->size = vmalloc_min - __va(bank->start);
 932                 }
 933 #else
 934                 bank->highmem = highmem;
 935
 936                 /*
 937                  * Highmem banks not allowed with !CONFIG_HIGHMEM.
 938                  */
 939                 if (highmem) {
 940                         printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
 941                                "(!CONFIG_HIGHMEM).\n",
 942                                (unsigned long long)bank->start,
 943                                (unsigned long long)bank->start + bank->size - 1);
 944                         continue;
 945                 }
 946
 947                 /*
 948                  * Check whether this memory bank would entirely overlap
 949                  * the vmalloc area.
 950                  */
 951                 if (__va(bank->start) >= vmalloc_min ||
 952                     __va(bank->start) < (void *)PAGE_OFFSET) {
 953                         printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
 954                                "(vmalloc region overlap).\n",
 955                                (unsigned long long)bank->start,
 956                                (unsigned long long)bank->start + bank->size - 1);
 957                         continue;
 958                 }
 959
 960                 /*
 961                  * Check whether this memory bank would partially overlap
 962                  * the vmalloc area.
 963                  */
 964                 if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
 965                     __va(bank->start + bank->size - 1) <= __va(bank->start)) {
 966                         unsigned long newsize = vmalloc_min - __va(bank->start);
 967                         printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
 968                                "to -%.8llx (vmalloc region overlap).\n",
 969                                (unsigned long long)bank->start,
 970                                (unsigned long long)bank->start + bank->size - 1,
 971                                (unsigned long long)bank->start + newsize - 1);
 972                         bank->size = newsize;
 973                 }
 974 #endif
 975                 if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
 976                         arm_lowmem_limit = bank->start + bank->size;
 977
 978                 j++;
 979         }
 980 #ifdef CONFIG_HIGHMEM
 981         if (highmem) {
 982                 const char *reason = NULL;
 983
 984                 if (cache_is_vipt_aliasing()) {
 985                         /*
 986                          * Interactions between kmap and other mappings
 987                          * make highmem support with aliasing VIPT caches
 988                          * rather difficult.
 989                          */
 990                         reason = "with VIPT aliasing cache";
 991                 }
 992                 if (reason) {
 993                         printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
 994                                 reason);
 995                         while (j > 0 && meminfo.bank[j - 1].highmem)
 996                                 j--;
 997                 }
 998         }
 999 #endif
1000         meminfo.nr_banks = j;
1001         high_memory = __va(arm_lowmem_limit - 1) + 1;
1002         memblock_set_current_limit(arm_lowmem_limit);
1003 }
1004
1005 static inline void prepare_page_table(void)
1006 {
1007         unsigned long addr;
1008         phys_addr_t end;
1009
1010         /*
1011          * Clear out all the mappings below the kernel image.
1012          */
1013         for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
1014                 pmd_clear(pmd_off_k(addr));
1015
1016 #ifdef CONFIG_XIP_KERNEL
1017         /* The XIP kernel is mapped in the module area -- skip over it */
1018         addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
1019 #endif
1020         for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
1021                 pmd_clear(pmd_off_k(addr));
1022
1023         /*
1024          * Find the end of the first block of lowmem.
1025          */
1026         end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
1027         if (end >= arm_lowmem_limit)
1028                 end = arm_lowmem_limit;
1029
1030         /*
1031          * Clear out all the kernel space mappings, except for the first
1032          * memory bank, up to the vmalloc region.
1033          */
1034         for (addr = __phys_to_virt(end);
1035              addr < VMALLOC_START; addr += PMD_SIZE)
1036                 pmd_clear(pmd_off_k(addr));
1037 }
1038
1039 #ifdef CONFIG_ARM_LPAE
1040 /* the first page is reserved for pgd */
1041 #define SWAPPER_PG_DIR_SIZE     (PAGE_SIZE + \
1042                                  PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
1043 #else
1044 #define SWAPPER_PG_DIR_SIZE     (PTRS_PER_PGD * sizeof(pgd_t))
1045 #endif
1046
1047 /*
1048  * Reserve the special regions of memory
1049  */
1050 void __init arm_mm_memblock_reserve(void)
1051 {
1052         /*
1053          * Reserve the page tables.  These are already in use,
1054          * and can only be in node 0.
1055          */
1056         memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
1057
1058 #ifdef CONFIG_SA1111
1059         /*
1060          * Because of the SA1111 DMA bug, we want to preserve our
1061          * precious DMA-able memory...
1062          */
1063         memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
1064 #endif
1065 }
1066
1067 /*
1068  * Set up the device mappings.  Since we clear out the page tables for all
1069  * mappings above VMALLOC_START, we will remove any debug device mappings.
1070  * This means you have to be careful how you debug this function, or any
1071  * called function.  This means you can't use any function or debugging
1072  * method which may touch any device, otherwise the kernel _will_ crash.
1073  */
1074 static void __init devicemaps_init(struct machine_desc *mdesc)
1075 {
1076         struct map_desc map;
1077         unsigned long addr;
1078         void *vectors;
1079
1080         /*
1081          * Allocate the vector page early.
1082          */
1083         vectors = early_alloc(PAGE_SIZE);
1084
1085         early_trap_init(vectors);
1086
1087         for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
1088                 pmd_clear(pmd_off_k(addr));
1089
1090         /*
1091          * Map the kernel if it is XIP.
1092          * It is always first in the modulearea.
1093          */
1094 #ifdef CONFIG_XIP_KERNEL
1095         map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
1096         map.virtual = MODULES_VADDR;
1097         map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
1098         map.type = MT_ROM;
1099         create_mapping(&map);
1100 #endif
1101
1102         /*
1103          * Map the cache flushing regions.
1104          */
1105 #ifdef FLUSH_BASE
1106         map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
1107         map.virtual = FLUSH_BASE;
1108         map.length = SZ_1M;
1109         map.type = MT_CACHECLEAN;
1110         create_mapping(&map);
1111 #endif
1112 #ifdef FLUSH_BASE_MINICACHE
1113         map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
1114         map.virtual = FLUSH_BASE_MINICACHE;
1115         map.length = SZ_1M;
1116         map.type = MT_MINICLEAN;
1117         create_mapping(&map);
1118 #endif
1119
1120         /*
1121          * Create a mapping for the machine vectors at the high-vectors
1122          * location (0xffff0000).  If we aren't using high-vectors, also
1123          * create a mapping at the low-vectors virtual address.
1124          */
1125         map.pfn = __phys_to_pfn(virt_to_phys(vectors));
1126         map.virtual = 0xffff0000;
1127         map.length = PAGE_SIZE;
1128         map.type = MT_HIGH_VECTORS;
1129         create_mapping(&map);
1130
1131         if (!vectors_high()) {
1132                 map.virtual = 0;
1133                 map.type = MT_LOW_VECTORS;
1134                 create_mapping(&map);
1135         }
1136
1137         /*
1138          * Ask the machine support to map in the statically mapped devices.
1139          */
1140         if (mdesc->map_io)
1141                 mdesc->map_io();
1142         fill_pmd_gaps();
1143
1144         /*
1145          * Finally flush the caches and tlb to ensure that we're in a
1146          * consistent state wrt the writebuffer.  This also ensures that
1147          * any write-allocated cache lines in the vector page are written
1148          * back.  After this point, we can start to touch devices again.
1149          */
1150         local_flush_tlb_all();
1151         flush_cache_all();
1152 }
1153
1154 static void __init kmap_init(void)
1155 {
1156 #ifdef CONFIG_HIGHMEM
1157         pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
1158                 PKMAP_BASE, _PAGE_KERNEL_TABLE);
1159 #endif
1160 }
1161
1162 static void __init map_lowmem(void)
1163 {
1164         struct memblock_region *reg;
1165
1166         /* Map all the lowmem memory banks. */
1167         for_each_memblock(memory, reg) {
1168                 phys_addr_t start = reg->base;
1169                 phys_addr_t end = start + reg->size;
1170                 struct map_desc map;
1171
1172                 if (end > arm_lowmem_limit)
1173                         end = arm_lowmem_limit;
1174                 if (start >= end)
1175                         break;
1176
1177                 map.pfn = __phys_to_pfn(start);
1178                 map.virtual = __phys_to_virt(start);
1179                 map.length = end - start;
1180                 map.type = MT_MEMORY;
1181
1182                 create_mapping(&map);
1183         }
1184 }
1185
1186 /*
1187  * paging_init() sets up the page tables, initialises the zone memory
1188  * maps, and sets up the zero page, bad page and bad page tables.
1189  */
1190 void __init paging_init(struct machine_desc *mdesc)
1191 {
1192         void *zero_page;
1193
1194         memblock_set_current_limit(arm_lowmem_limit);
1195
1196         build_mem_type_table();
1197         prepare_page_table();
1198         map_lowmem();
1199         dma_contiguous_remap();
1200         devicemaps_init(mdesc);
1201         kmap_init();
1202
1203         top_pmd = pmd_off_k(0xffff0000);
1204
1205         /* allocate the zero page. */
1206         zero_page = early_alloc(PAGE_SIZE);
1207
1208         bootmem_init();
1209
1210         empty_zero_page = virt_to_page(zero_page);
1211         __flush_dcache_page(NULL, empty_zero_page);
1212 }