2d49de572ba1f14cd57fce9f430507569637266f
[pandora-kernel.git] / arch / arm / mach-pxa / tosa.c
1 /*
2  *  Support for Sharp SL-C6000x PDAs
3  *  Model: (Tosa)
4  *
5  *  Copyright (c) 2005 Dirk Opfer
6  *
7  *      Based on code written by Sharp/Lineo for 2.4 kernels
8  *
9  *  This program is free software; you can redistribute it and/or modify
10  *  it under the terms of the GNU General Public License version 2 as
11  *  published by the Free Software Foundation.
12  *
13  */
14
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
19 #include <linux/fs.h>
20 #include <linux/interrupt.h>
21 #include <linux/delay.h>
22 #include <linux/fb.h>
23 #include <linux/mmc/host.h>
24 #include <linux/mfd/tc6393xb.h>
25 #include <linux/mfd/tmio.h>
26 #include <linux/mtd/nand.h>
27 #include <linux/mtd/partitions.h>
28 #include <linux/pm.h>
29 #include <linux/gpio_keys.h>
30 #include <linux/input.h>
31 #include <linux/gpio.h>
32 #include <linux/pda_power.h>
33 #include <linux/rfkill.h>
34
35 #include <asm/setup.h>
36 #include <asm/mach-types.h>
37 #include <asm/arch/pxa2xx-regs.h>
38 #include <asm/arch/mfp-pxa25x.h>
39 #include <asm/arch/irda.h>
40 #include <asm/arch/i2c.h>
41 #include <asm/arch/mmc.h>
42 #include <asm/arch/udc.h>
43 #include <asm/arch/tosa_bt.h>
44
45 #include <asm/mach/arch.h>
46 #include <asm/arch/tosa.h>
47
48 #include <asm/hardware/scoop.h>
49 #include <asm/mach/sharpsl_param.h>
50
51 #include "generic.h"
52 #include "devices.h"
53
54 static unsigned long tosa_pin_config[] = {
55         GPIO78_nCS_2, /* Scoop */
56         GPIO80_nCS_4, /* tg6393xb */
57         GPIO33_nCS_5, /* Scoop */
58
59         // GPIO76 CARD_VCC_ON1
60
61         GPIO19_GPIO, /* Reset out */
62         GPIO1_RST | WAKEUP_ON_EDGE_FALL,
63
64         GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
65         GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
66         GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
67         GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
68         GPIO20_GPIO, /* EAR_IN */
69         GPIO22_GPIO, /* On */
70
71         GPIO5_GPIO, /* USB_IN */
72         GPIO32_GPIO, /* Pen IRQ */
73
74         GPIO7_GPIO, /* Jacket Detect */
75         GPIO14_GPIO, /* BAT0_CRG */
76         GPIO12_GPIO, /* BAT1_CRG */
77         GPIO17_GPIO, /* BAT0_LOW */
78         GPIO84_GPIO, /* BAT1_LOW */
79         GPIO38_GPIO, /* BAT_LOCK */
80
81         GPIO11_3_6MHz,
82         GPIO15_GPIO, /* TC6393XB IRQ */
83         GPIO18_RDY,
84         GPIO27_GPIO, /* LCD Sync */
85
86         /* MMC */
87         GPIO6_MMC_CLK,
88         GPIO8_MMC_CS0,
89         GPIO9_GPIO, /* Detect */
90         GPIO10_GPIO, /* nSD_INT */
91
92         /* CF */
93         GPIO13_GPIO, /* CD_IRQ */
94         GPIO21_GPIO, /* Main Slot IRQ */
95         GPIO36_GPIO, /* Jacket Slot IRQ */
96         GPIO48_nPOE,
97         GPIO49_nPWE,
98         GPIO50_nPIOR,
99         GPIO51_nPIOW,
100         GPIO52_nPCE_1,
101         GPIO53_nPCE_2,
102         GPIO54_nPSKTSEL,
103         GPIO55_nPREG,
104         GPIO56_nPWAIT,
105         GPIO57_nIOIS16,
106
107         /* AC97 */
108         GPIO31_AC97_SYNC,
109         GPIO30_AC97_SDATA_OUT,
110         GPIO28_AC97_BITCLK,
111         GPIO29_AC97_SDATA_IN_0,
112         // GPIO79 nAUD_IRQ
113
114         /* FFUART */
115         GPIO34_FFUART_RXD,
116         GPIO35_FFUART_CTS,
117         GPIO37_FFUART_DSR,
118         GPIO39_FFUART_TXD,
119         GPIO40_FFUART_DTR,
120         GPIO41_FFUART_RTS,
121
122         /* BTUART */
123         GPIO42_BTUART_RXD,
124         GPIO43_BTUART_TXD,
125         GPIO44_BTUART_CTS,
126         GPIO45_BTUART_RTS,
127
128         /* Keybd */
129         GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
130         GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
131         GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
132         GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
133         GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
134         GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
135         GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
136         GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
137         GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
138         GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
139         GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
140         GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
141         GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
142         GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
143         GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
144         GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
145         GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
146         GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
147
148         /* SPI */
149         GPIO81_SSP2_CLK_OUT,
150         GPIO82_SSP2_FRM_OUT,
151         GPIO83_SSP2_TXD,
152 };
153
154 static unsigned long tosa_pin_irda_off[] = {
155         GPIO46_STUART_RXD,
156         GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
157 };
158
159 static unsigned long tosa_pin_irda_on[] = {
160         GPIO46_STUART_RXD,
161         GPIO47_STUART_TXD,
162 };
163
164
165 /*
166  * SCOOP Device
167  */
168 static struct resource tosa_scoop_resources[] = {
169         [0] = {
170                 .start  = TOSA_CF_PHYS,
171                 .end    = TOSA_CF_PHYS + 0xfff,
172                 .flags  = IORESOURCE_MEM,
173         },
174 };
175
176 static struct scoop_config tosa_scoop_setup = {
177         .io_dir         = TOSA_SCOOP_IO_DIR,
178         .gpio_base      = TOSA_SCOOP_GPIO_BASE,
179 };
180
181 static struct platform_device tosascoop_device = {
182         .name           = "sharp-scoop",
183         .id             = 0,
184         .dev            = {
185                 .platform_data  = &tosa_scoop_setup,
186         },
187         .num_resources  = ARRAY_SIZE(tosa_scoop_resources),
188         .resource       = tosa_scoop_resources,
189 };
190
191
192 /*
193  * SCOOP Device Jacket
194  */
195 static struct resource tosa_scoop_jc_resources[] = {
196         [0] = {
197                 .start          = TOSA_SCOOP_PHYS + 0x40,
198                 .end            = TOSA_SCOOP_PHYS + 0xfff,
199                 .flags          = IORESOURCE_MEM,
200         },
201 };
202
203 static struct scoop_config tosa_scoop_jc_setup = {
204         .io_dir         = TOSA_SCOOP_JC_IO_DIR,
205         .gpio_base      = TOSA_SCOOP_JC_GPIO_BASE,
206 };
207
208 static struct platform_device tosascoop_jc_device = {
209         .name           = "sharp-scoop",
210         .id             = 1,
211         .dev            = {
212                 .platform_data  = &tosa_scoop_jc_setup,
213                 .parent         = &tosascoop_device.dev,
214         },
215         .num_resources  = ARRAY_SIZE(tosa_scoop_jc_resources),
216         .resource       = tosa_scoop_jc_resources,
217 };
218
219 /*
220  * PCMCIA
221  */
222 static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
223 {
224         .dev        = &tosascoop_device.dev,
225         .irq        = TOSA_IRQ_GPIO_CF_IRQ,
226         .cd_irq     = TOSA_IRQ_GPIO_CF_CD,
227         .cd_irq_str = "PCMCIA0 CD",
228 },{
229         .dev        = &tosascoop_jc_device.dev,
230         .irq        = TOSA_IRQ_GPIO_JC_CF_IRQ,
231         .cd_irq     = -1,
232 },
233 };
234
235 static struct scoop_pcmcia_config tosa_pcmcia_config = {
236         .devs         = &tosa_pcmcia_scoop[0],
237         .num_devs     = 2,
238 };
239
240 /*
241  * USB Device Controller
242  */
243 static struct pxa2xx_udc_mach_info udc_info __initdata = {
244         .gpio_pullup            = TOSA_GPIO_USB_PULLUP,
245         .gpio_vbus              = TOSA_GPIO_USB_IN,
246         .gpio_vbus_inverted     = 1,
247 };
248
249 /*
250  * MMC/SD Device
251  */
252 static struct pxamci_platform_data tosa_mci_platform_data;
253
254 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
255 {
256         int err;
257
258         tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
259
260         err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
261         if (err) {
262                 printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
263                 goto err_gpio_detect;
264         }
265         err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
266         if (err)
267                 goto err_gpio_detect_dir;
268
269         err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
270                           IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
271                                 "MMC/SD card detect", data);
272         if (err) {
273                 printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
274                 goto err_irq;
275         }
276
277         err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
278         if (err) {
279                 printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
280                 goto err_gpio_wp;
281         }
282         err = gpio_direction_input(TOSA_GPIO_SD_WP);
283         if (err)
284                 goto err_gpio_wp_dir;
285
286         err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
287         if (err) {
288                 printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
289                 goto err_gpio_pwr;
290         }
291         err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
292         if (err)
293                 goto err_gpio_pwr_dir;
294
295         err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
296         if (err) {
297                 printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
298                 goto err_gpio_int;
299         }
300         err = gpio_direction_input(TOSA_GPIO_nSD_INT);
301         if (err)
302                 goto err_gpio_int_dir;
303
304         return 0;
305
306 err_gpio_int_dir:
307         gpio_free(TOSA_GPIO_nSD_INT);
308 err_gpio_int:
309 err_gpio_pwr_dir:
310         gpio_free(TOSA_GPIO_PWR_ON);
311 err_gpio_pwr:
312 err_gpio_wp_dir:
313         gpio_free(TOSA_GPIO_SD_WP);
314 err_gpio_wp:
315         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
316 err_irq:
317 err_gpio_detect_dir:
318         gpio_free(TOSA_GPIO_nSD_DETECT);
319 err_gpio_detect:
320         return err;
321 }
322
323 static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
324 {
325         struct pxamci_platform_data* p_d = dev->platform_data;
326
327         if (( 1 << vdd) & p_d->ocr_mask) {
328                 gpio_set_value(TOSA_GPIO_PWR_ON, 1);
329         } else {
330                 gpio_set_value(TOSA_GPIO_PWR_ON, 0);
331         }
332 }
333
334 static int tosa_mci_get_ro(struct device *dev)
335 {
336         return gpio_get_value(TOSA_GPIO_SD_WP);
337 }
338
339 static void tosa_mci_exit(struct device *dev, void *data)
340 {
341         gpio_free(TOSA_GPIO_nSD_INT);
342         gpio_free(TOSA_GPIO_PWR_ON);
343         gpio_free(TOSA_GPIO_SD_WP);
344         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
345         gpio_free(TOSA_GPIO_nSD_DETECT);
346 }
347
348 static struct pxamci_platform_data tosa_mci_platform_data = {
349         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
350         .init           = tosa_mci_init,
351         .get_ro         = tosa_mci_get_ro,
352         .setpower       = tosa_mci_setpower,
353         .exit           = tosa_mci_exit,
354 };
355
356 /*
357  * Irda
358  */
359 static void tosa_irda_transceiver_mode(struct device *dev, int mode)
360 {
361         if (mode & IR_OFF) {
362                 gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
363                 pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
364                 gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
365         } else {
366                 pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_on));
367                 gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
368         }
369 }
370
371 static int tosa_irda_startup(struct device *dev)
372 {
373         int ret;
374
375         ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
376         if (ret)
377                 goto err_tx;
378         ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
379         if (ret)
380                 goto err_tx_dir;
381
382         ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
383         if (ret)
384                 goto err_pwr;
385
386         ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
387         if (ret)
388                 goto err_pwr_dir;
389
390         tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
391
392         return 0;
393
394 err_pwr_dir:
395         gpio_free(TOSA_GPIO_IR_POWERDWN);
396 err_pwr:
397 err_tx_dir:
398         gpio_free(TOSA_GPIO_IRDA_TX);
399 err_tx:
400         return ret;
401 }
402
403 static void tosa_irda_shutdown(struct device *dev)
404 {
405         tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
406         gpio_free(TOSA_GPIO_IR_POWERDWN);
407         gpio_free(TOSA_GPIO_IRDA_TX);
408 }
409
410 static struct pxaficp_platform_data tosa_ficp_platform_data = {
411         .transceiver_cap  = IR_SIRMODE | IR_OFF,
412         .transceiver_mode = tosa_irda_transceiver_mode,
413         .startup = tosa_irda_startup,
414         .shutdown = tosa_irda_shutdown,
415 };
416
417 /*
418  * Tosa AC IN
419  */
420 static int tosa_power_init(struct device *dev)
421 {
422         int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
423         if (ret)
424                 goto err_gpio_req;
425
426         ret = gpio_direction_input(TOSA_GPIO_AC_IN);
427         if (ret)
428                 goto err_gpio_in;
429
430         return 0;
431
432 err_gpio_in:
433         gpio_free(TOSA_GPIO_AC_IN);
434 err_gpio_req:
435         return ret;
436 }
437
438 static void tosa_power_exit(struct device *dev)
439 {
440         gpio_free(TOSA_GPIO_AC_IN);
441 }
442
443 static int tosa_power_ac_online(void)
444 {
445         return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
446 }
447
448 static char *tosa_ac_supplied_to[] = {
449         "main-battery",
450         "backup-battery",
451         "jacket-battery",
452 };
453
454 static struct pda_power_pdata tosa_power_data = {
455         .init                   = tosa_power_init,
456         .is_ac_online           = tosa_power_ac_online,
457         .exit                   = tosa_power_exit,
458         .supplied_to            = tosa_ac_supplied_to,
459         .num_supplicants        = ARRAY_SIZE(tosa_ac_supplied_to),
460 };
461
462 static struct resource tosa_power_resource[] = {
463         {
464                 .name           = "ac",
465                 .start          = gpio_to_irq(TOSA_GPIO_AC_IN),
466                 .end            = gpio_to_irq(TOSA_GPIO_AC_IN),
467                 .flags          = IORESOURCE_IRQ |
468                                   IORESOURCE_IRQ_HIGHEDGE |
469                                   IORESOURCE_IRQ_LOWEDGE,
470         },
471 };
472
473 static struct platform_device tosa_power_device = {
474         .name                   = "pda-power",
475         .id                     = -1,
476         .dev.platform_data      = &tosa_power_data,
477         .resource               = tosa_power_resource,
478         .num_resources          = ARRAY_SIZE(tosa_power_resource),
479 };
480
481 /*
482  * Tosa Keyboard
483  */
484 static struct platform_device tosakbd_device = {
485         .name           = "tosa-keyboard",
486         .id             = -1,
487 };
488
489 static struct gpio_keys_button tosa_gpio_keys[] = {
490         /*
491          * Two following keys are directly tied to "ON" button of tosa. Why?
492          * The first one can be used as a wakeup source, the second can't;
493          * also the first one is OR of ac_powered and on_button.
494          */
495         {
496                 .type   = EV_PWR,
497                 .code   = KEY_RESERVED,
498                 .gpio   = TOSA_GPIO_POWERON,
499                 .desc   = "Poweron",
500                 .wakeup = 1,
501                 .active_low = 1,
502         },
503         {
504                 .type   = EV_PWR,
505                 .code   = KEY_SUSPEND,
506                 .gpio   = TOSA_GPIO_ON_KEY,
507                 .desc   = "On key",
508                 /*
509                  * can't be used as wakeup
510                  * .wakeup      = 1,
511                  */
512                 .active_low = 1,
513         },
514         {
515                 .type   = EV_KEY,
516                 .code   = TOSA_KEY_RECORD,
517                 .gpio   = TOSA_GPIO_RECORD_BTN,
518                 .desc   = "Record Button",
519                 .wakeup = 1,
520                 .active_low = 1,
521         },
522         {
523                 .type   = EV_KEY,
524                 .code   = TOSA_KEY_SYNC,
525                 .gpio   = TOSA_GPIO_SYNC,
526                 .desc   = "Sync Button",
527                 .wakeup = 1,
528                 .active_low = 1,
529         },
530 };
531
532 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
533         .buttons        = tosa_gpio_keys,
534         .nbuttons       = ARRAY_SIZE(tosa_gpio_keys),
535 };
536
537 static struct platform_device tosa_gpio_keys_device = {
538         .name   = "gpio-keys",
539         .id     = -1,
540         .dev    = {
541                 .platform_data  = &tosa_gpio_keys_platform_data,
542         },
543 };
544
545 /*
546  * Tosa LEDs
547  */
548 static struct gpio_led tosa_gpio_leds[] = {
549         {
550                 .name                   = "tosa:amber:charge",
551                 .default_trigger        = "main-battery-charging",
552                 .gpio                   = TOSA_GPIO_CHRG_ERR_LED,
553         },
554         {
555                 .name                   = "tosa:green:mail",
556                 .default_trigger        = "nand-disk",
557                 .gpio                   = TOSA_GPIO_NOTE_LED,
558         },
559         {
560                 .name                   = "tosa:dual:wlan",
561                 .default_trigger        = "none",
562                 .gpio                   = TOSA_GPIO_WLAN_LED,
563         },
564         {
565                 .name                   = "tosa:blue:bluetooth",
566                 .default_trigger        = "tosa-bt",
567                 .gpio                   = TOSA_GPIO_BT_LED,
568         },
569 };
570
571 static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
572         .leds           = tosa_gpio_leds,
573         .num_leds       = ARRAY_SIZE(tosa_gpio_leds),
574 };
575
576 static struct platform_device tosaled_device = {
577         .name   = "leds-gpio",
578         .id     = -1,
579         .dev    = {
580                 .platform_data  = &tosa_gpio_leds_platform_data,
581         },
582 };
583
584 /*
585  * Toshiba Mobile IO Controller
586  */
587 static struct resource tc6393xb_resources[] = {
588         [0] = {
589                 .start  = TOSA_LCDC_PHYS,
590                 .end    = TOSA_LCDC_PHYS + 0x3ffffff,
591                 .flags  = IORESOURCE_MEM,
592         },
593
594         [1] = {
595                 .start  = TOSA_IRQ_GPIO_TC6393XB_INT,
596                 .end    = TOSA_IRQ_GPIO_TC6393XB_INT,
597                 .flags  = IORESOURCE_IRQ,
598         },
599 };
600
601
602 static int tosa_tc6393xb_enable(struct platform_device *dev)
603 {
604         int rc;
605
606         rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
607         if (rc)
608                 goto err_req_pclr;
609         rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
610         if (rc)
611                 goto err_req_suspend;
612         rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
613         if (rc)
614                 goto err_req_l3v;
615         rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
616         if (rc)
617                 goto err_dir_l3v;
618         rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
619         if (rc)
620                 goto err_dir_suspend;
621         rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
622         if (rc)
623                 goto err_dir_pclr;
624
625         mdelay(1);
626
627         gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
628
629         mdelay(10);
630
631         gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
632         gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
633
634         return 0;
635 err_dir_pclr:
636 err_dir_suspend:
637 err_dir_l3v:
638         gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
639 err_req_l3v:
640         gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
641 err_req_suspend:
642         gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
643 err_req_pclr:
644         return rc;
645 }
646
647 static int tosa_tc6393xb_disable(struct platform_device *dev)
648 {
649         gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
650         gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
651         gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
652
653         return 0;
654 }
655
656 static int tosa_tc6393xb_resume(struct platform_device *dev)
657 {
658         gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
659         mdelay(10);
660         gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
661         mdelay(10);
662
663         return 0;
664 }
665
666 static int tosa_tc6393xb_suspend(struct platform_device *dev)
667 {
668         gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
669         gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
670         return 0;
671 }
672
673 static struct mtd_partition tosa_nand_partition[] = {
674         {
675                 .name   = "smf",
676                 .offset = 0,
677                 .size   = 7 * 1024 * 1024,
678         },
679         {
680                 .name   = "root",
681                 .offset = MTDPART_OFS_APPEND,
682                 .size   = 28 * 1024 * 1024,
683         },
684         {
685                 .name   = "home",
686                 .offset = MTDPART_OFS_APPEND,
687                 .size   = MTDPART_SIZ_FULL,
688         },
689 };
690
691 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
692
693 static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
694         .options        = 0,
695         .offs           = 4,
696         .len            = 2,
697         .pattern        = scan_ff_pattern
698 };
699
700 static struct tmio_nand_data tosa_tc6393xb_nand_config = {
701         .num_partitions = ARRAY_SIZE(tosa_nand_partition),
702         .partition      = tosa_nand_partition,
703         .badblock_pattern = &tosa_tc6393xb_nand_bbt,
704 };
705
706 static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
707         .scr_pll2cr     = 0x0cc1,
708         .scr_gper       = 0x3300,
709         .scr_gpo_dsr    =
710                 TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
711         .scr_gpo_doecr  =
712                 TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
713
714         .irq_base       = IRQ_BOARD_START,
715         .gpio_base      = TOSA_TC6393XB_GPIO_BASE,
716
717         .enable         = tosa_tc6393xb_enable,
718         .disable        = tosa_tc6393xb_disable,
719         .suspend        = tosa_tc6393xb_suspend,
720         .resume         = tosa_tc6393xb_resume,
721
722         .nand_data      = &tosa_tc6393xb_nand_config,
723 };
724
725
726 static struct platform_device tc6393xb_device = {
727         .name   = "tc6393xb",
728         .id     = -1,
729         .dev    = {
730                 .platform_data  = &tosa_tc6393xb_setup,
731         },
732         .num_resources  = ARRAY_SIZE(tc6393xb_resources),
733         .resource       = tc6393xb_resources,
734 };
735
736 static struct tosa_bt_data tosa_bt_data = {
737         .gpio_pwr       = TOSA_GPIO_BT_PWR_EN,
738         .gpio_reset     = TOSA_GPIO_BT_RESET,
739 };
740
741 static struct platform_device tosa_bt_device = {
742         .name   = "tosa-bt",
743         .id     = -1,
744         .dev.platform_data = &tosa_bt_data,
745 };
746
747
748 static struct platform_device *devices[] __initdata = {
749         &tosascoop_device,
750         &tosascoop_jc_device,
751         &tc6393xb_device,
752         &tosa_power_device,
753         &tosakbd_device,
754         &tosa_gpio_keys_device,
755         &tosaled_device,
756         &tosa_bt_device,
757 };
758
759 static void tosa_poweroff(void)
760 {
761         arm_machine_restart('g');
762 }
763
764 static void tosa_restart(char mode)
765 {
766         /* Bootloader magic for a reboot */
767         if((MSC0 & 0xffff0000) == 0x7ff00000)
768                 MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
769
770         tosa_poweroff();
771 }
772
773 static void __init tosa_init(void)
774 {
775         int dummy;
776
777         pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
778         pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
779         gpio_set_wake(MFP_PIN_GPIO1, 1);
780         /* We can't pass to gpio-keys since it will drop the Reset altfunc */
781
782         init_gpio_reset(TOSA_GPIO_ON_RESET);
783
784         pm_power_off = tosa_poweroff;
785         arm_pm_restart = tosa_restart;
786
787         PCFR |= PCFR_OPDE;
788
789         /* enable batt_fault */
790         PMCR = 0x01;
791
792         dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
793         dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
794         dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
795
796         pxa_set_mci_info(&tosa_mci_platform_data);
797         pxa_set_udc_info(&udc_info);
798         pxa_set_ficp_info(&tosa_ficp_platform_data);
799         pxa_set_i2c_info(NULL);
800         platform_scoop_config = &tosa_pcmcia_config;
801
802         platform_add_devices(devices, ARRAY_SIZE(devices));
803 }
804
805 static void __init fixup_tosa(struct machine_desc *desc,
806                 struct tag *tags, char **cmdline, struct meminfo *mi)
807 {
808         sharpsl_save_param();
809         mi->nr_banks=1;
810         mi->bank[0].start = 0xa0000000;
811         mi->bank[0].node = 0;
812         mi->bank[0].size = (64*1024*1024);
813 }
814
815 MACHINE_START(TOSA, "SHARP Tosa")
816         .phys_io        = 0x40000000,
817         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
818         .fixup          = fixup_tosa,
819         .map_io         = pxa_map_io,
820         .init_irq       = pxa25x_init_irq,
821         .init_machine   = tosa_init,
822         .timer          = &pxa_timer,
823 MACHINE_END