net: mv88e61xx: fix autonegotiation on ports

phy_reset should be called before autoneg is setup

The only boards using MV88E61XX_SWITCH are:
 - alliedtelesis/SBx81LIFKW
 - alliedtelesis/SBx81LIFXCAT
 - gateworks/gw_ventana

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index ea54a15..c1e2860 100644 (file)
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -945,14 +945,14 @@ static int mv88e61xx_phy_config(struct phy_device *phydev)
                                continue;
                        }
 
-                       res = genphy_config_aneg(phydev);
+                       res = phy_reset(phydev);
                        if (res < 0) {
-                               printf("Error setting PHY %i autoneg\n", i);
+                               printf("Error resetting PHY %i\n", i);
                                continue;
                        }
-                       res = phy_reset(phydev);
+                       res = genphy_config_aneg(phydev);
                        if (res < 0) {
-                               printf("Error resetting PHY %i\n", i);
+                               printf("Error setting PHY %i autoneg\n", i);
                                continue;
                        }