gpio: Add VIA VX855 GPIO driver
authorDaniel Drake <dsd@laptop.org>
Thu, 30 Sep 2010 20:55:48 +0000 (21:55 +0100)
committerSamuel Ortiz <sameo@linux.intel.com>
Thu, 28 Oct 2010 22:29:51 +0000 (00:29 +0200)
This is needed for supporting the upcoming VX855 camera and OLPC DCON
drivers, as well as the advanced viafb features on non-OLPC hardware
based on this chip.

Based on earlier work by Harald Welte.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
drivers/gpio/Kconfig
drivers/gpio/Makefile
drivers/gpio/vx855_gpio.c [new file with mode: 0644]

index dd9b4ba..3143ac7 100644 (file)
@@ -116,6 +116,18 @@ config GPIO_SCH
          This driver can also be built as a module. If so, the module
          will be called sch-gpio.
 
+config GPIO_VX855
+       tristate "VIA VX855/VX875 GPIO"
+       depends on GPIOLIB
+       select MFD_CORE
+       select MFD_VX855
+       help
+         Support access to the VX855/VX875 GPIO lines through the gpio library.
+
+         This driver provides common support for accessing the device,
+         additional drivers must be enabled in order to use the
+         functionality of the device.
+
 comment "I2C GPIO expanders:"
 
 config GPIO_MAX7300
index da2ecde..bdf3dde 100644 (file)
@@ -40,3 +40,4 @@ obj-$(CONFIG_GPIO_SCH)                += sch_gpio.o
 obj-$(CONFIG_GPIO_RDC321X)     += rdc321x-gpio.o
 obj-$(CONFIG_GPIO_JANZ_TTL)    += janz-ttl.o
 obj-$(CONFIG_GPIO_SX150X)      += sx150x.o
+obj-$(CONFIG_GPIO_VX855)       += vx855_gpio.o
diff --git a/drivers/gpio/vx855_gpio.c b/drivers/gpio/vx855_gpio.c
new file mode 100644 (file)
index 0000000..8a98ee5
--- /dev/null
@@ -0,0 +1,332 @@
+/*
+ * Linux GPIOlib driver for the VIA VX855 integrated southbridge GPIO
+ *
+ * Copyright (C) 2009 VIA Technologies, Inc.
+ * Copyright (C) 2010 One Laptop per Child
+ * Author: Harald Welte <HaraldWelte@viatech.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+
+#define MODULE_NAME "vx855_gpio"
+
+/* The VX855 south bridge has the following GPIO pins:
+ *     GPI 0...13      General Purpose Input
+ *     GPO 0...12      General Purpose Output
+ *     GPIO 0...14     General Purpose I/O (Open-Drain)
+ */
+
+#define NR_VX855_GPI   14
+#define NR_VX855_GPO   13
+#define NR_VX855_GPIO  15
+
+#define NR_VX855_GPInO (NR_VX855_GPI + NR_VX855_GPO)
+#define NR_VX855_GP    (NR_VX855_GPI + NR_VX855_GPO + NR_VX855_GPIO)
+
+struct vx855_gpio {
+       struct gpio_chip gpio;
+       spinlock_t lock;
+       u32 io_gpi;
+       u32 io_gpo;
+       bool gpi_reserved;
+       bool gpo_reserved;
+};
+
+/* resolve a GPIx into the corresponding bit position */
+static inline u_int32_t gpi_i_bit(int i)
+{
+       if (i < 10)
+               return 1 << i;
+       else
+               return 1 << (i + 14);
+}
+
+static inline u_int32_t gpo_o_bit(int i)
+{
+       if (i < 11)
+               return 1 << i;
+       else
+               return 1 << (i + 14);
+}
+
+static inline u_int32_t gpio_i_bit(int i)
+{
+       if (i < 14)
+               return 1 << (i + 10);
+       else
+               return 1 << (i + 14);
+}
+
+static inline u_int32_t gpio_o_bit(int i)
+{
+       if (i < 14)
+               return 1 << (i + 11);
+       else
+               return 1 << (i + 13);
+}
+
+/* Mapping betwee numeric GPIO ID and the actual GPIO hardware numbering:
+ * 0..13       GPI 0..13
+ * 14..26      GPO 0..12
+ * 27..41      GPIO 0..14
+ */
+
+static int vx855gpio_direction_input(struct gpio_chip *gpio,
+                                    unsigned int nr)
+{
+       struct vx855_gpio *vg = container_of(gpio, struct vx855_gpio, gpio);
+       unsigned long flags;
+       u_int32_t reg_out;
+
+       /* Real GPI bits are always in input direction */
+       if (nr < NR_VX855_GPI)
+               return 0;
+
+       /* Real GPO bits cannot be put in output direction */
+       if (nr < NR_VX855_GPInO)
+               return -EINVAL;
+
+       /* Open Drain GPIO have to be set to one */
+       spin_lock_irqsave(&vg->lock, flags);
+       reg_out = inl(vg->io_gpo);
+       reg_out |= gpio_o_bit(nr - NR_VX855_GPInO);
+       outl(reg_out, vg->io_gpo);
+       spin_unlock_irqrestore(&vg->lock, flags);
+
+       return 0;
+}
+
+static int vx855gpio_get(struct gpio_chip *gpio, unsigned int nr)
+{
+       struct vx855_gpio *vg = container_of(gpio, struct vx855_gpio, gpio);
+       u_int32_t reg_in;
+       int ret = 0;
+
+       if (nr < NR_VX855_GPI) {
+               reg_in = inl(vg->io_gpi);
+               if (reg_in & gpi_i_bit(nr))
+                       ret = 1;
+       } else if (nr < NR_VX855_GPInO) {
+               /* GPO don't have an input bit, we need to read it
+                * back from the output register */
+               reg_in = inl(vg->io_gpo);
+               if (reg_in & gpo_o_bit(nr - NR_VX855_GPI))
+                       ret = 1;
+       } else {
+               reg_in = inl(vg->io_gpi);
+               if (reg_in & gpio_i_bit(nr - NR_VX855_GPInO))
+                       ret = 1;
+       }
+
+       return ret;
+}
+
+static void vx855gpio_set(struct gpio_chip *gpio, unsigned int nr,
+                         int val)
+{
+       struct vx855_gpio *vg = container_of(gpio, struct vx855_gpio, gpio);
+       unsigned long flags;
+       u_int32_t reg_out;
+
+       /* True GPI cannot be switched to output mode */
+       if (nr < NR_VX855_GPI)
+               return;
+
+       spin_lock_irqsave(&vg->lock, flags);
+       reg_out = inl(vg->io_gpo);
+       if (nr < NR_VX855_GPInO) {
+               if (val)
+                       reg_out |= gpo_o_bit(nr - NR_VX855_GPI);
+               else
+                       reg_out &= ~gpo_o_bit(nr - NR_VX855_GPI);
+       } else {
+               if (val)
+                       reg_out |= gpio_o_bit(nr - NR_VX855_GPInO);
+               else
+                       reg_out &= ~gpio_o_bit(nr - NR_VX855_GPInO);
+       }
+       outl(reg_out, vg->io_gpo);
+       spin_unlock_irqrestore(&vg->lock, flags);
+}
+
+static int vx855gpio_direction_output(struct gpio_chip *gpio,
+                                     unsigned int nr, int val)
+{
+       /* True GPI cannot be switched to output mode */
+       if (nr < NR_VX855_GPI)
+               return -EINVAL;
+
+       /* True GPO don't need to be switched to output mode,
+        * and GPIO are open-drain, i.e. also need no switching,
+        * so all we do is set the level */
+       vx855gpio_set(gpio, nr, val);
+
+       return 0;
+}
+
+static const char *vx855gpio_names[NR_VX855_GP] = {
+       "VX855_GPI0", "VX855_GPI1", "VX855_GPI2", "VX855_GPI3", "VX855_GPI4",
+       "VX855_GPI5", "VX855_GPI6", "VX855_GPI7", "VX855_GPI8", "VX855_GPI9",
+       "VX855_GPI10", "VX855_GPI11", "VX855_GPI12", "VX855_GPI13",
+       "VX855_GPO0", "VX855_GPO1", "VX855_GPO2", "VX855_GPO3", "VX855_GPO4",
+       "VX855_GPO5", "VX855_GPO6", "VX855_GPO7", "VX855_GPO8", "VX855_GPO9",
+       "VX855_GPO10", "VX855_GPO11", "VX855_GPO12",
+       "VX855_GPIO0", "VX855_GPIO1", "VX855_GPIO2", "VX855_GPIO3",
+       "VX855_GPIO4", "VX855_GPIO5", "VX855_GPIO6", "VX855_GPIO7",
+       "VX855_GPIO8", "VX855_GPIO9", "VX855_GPIO10", "VX855_GPIO11",
+       "VX855_GPIO12", "VX855_GPIO13", "VX855_GPIO14"
+};
+
+static void vx855gpio_gpio_setup(struct vx855_gpio *vg)
+{
+       struct gpio_chip *c = &vg->gpio;
+
+       c->label = "VX855 South Bridge";
+       c->owner = THIS_MODULE;
+       c->direction_input = vx855gpio_direction_input;
+       c->direction_output = vx855gpio_direction_output;
+       c->get = vx855gpio_get;
+       c->set = vx855gpio_set;
+       c->dbg_show = NULL;
+       c->base = 0;
+       c->ngpio = NR_VX855_GP;
+       c->can_sleep = 0;
+       c->names = vx855gpio_names;
+}
+
+/* This platform device is ordinarily registered by the vx855 mfd driver */
+static __devinit int vx855gpio_probe(struct platform_device *pdev)
+{
+       struct resource *res_gpi;
+       struct resource *res_gpo;
+       struct vx855_gpio *vg;
+       int ret;
+
+       res_gpi = platform_get_resource(pdev, IORESOURCE_IO, 0);
+       res_gpo = platform_get_resource(pdev, IORESOURCE_IO, 1);
+       if (!res_gpi || !res_gpo)
+               return -EBUSY;
+
+       vg = kzalloc(sizeof(*vg), GFP_KERNEL);
+       if (!vg)
+               return -ENOMEM;
+
+       platform_set_drvdata(pdev, vg);
+
+       dev_info(&pdev->dev, "found VX855 GPIO controller\n");
+       vg->io_gpi = res_gpi->start;
+       vg->io_gpo = res_gpo->start;
+       spin_lock_init(&vg->lock);
+
+       /*
+        * A single byte is used to control various GPIO ports on the VX855,
+        * and in the case of the OLPC XO-1.5, some of those ports are used
+        * for switches that are interpreted and exposed through ACPI. ACPI
+        * will have reserved the region, so our own reservation will not
+        * succeed. Ignore and continue.
+        */
+
+       if (!request_region(res_gpi->start, resource_size(res_gpi),
+                       MODULE_NAME "_gpi"))
+               dev_warn(&pdev->dev,
+                       "GPI I/O resource busy, probably claimed by ACPI\n");
+       else
+               vg->gpi_reserved = true;
+
+       if (!request_region(res_gpo->start, resource_size(res_gpo),
+                       MODULE_NAME "_gpo"))
+               dev_warn(&pdev->dev,
+                       "GPO I/O resource busy, probably claimed by ACPI\n");
+       else
+               vg->gpo_reserved = true;
+
+       vx855gpio_gpio_setup(vg);
+
+       ret = gpiochip_add(&vg->gpio);
+       if (ret) {
+               dev_err(&pdev->dev, "failed to register GPIOs\n");
+               goto out_release;
+       }
+
+       return 0;
+
+out_release:
+       if (vg->gpi_reserved)
+               release_region(res_gpi->start, resource_size(res_gpi));
+       if (vg->gpo_reserved)
+               release_region(res_gpi->start, resource_size(res_gpo));
+       platform_set_drvdata(pdev, NULL);
+       kfree(vg);
+       return ret;
+}
+
+static int __devexit vx855gpio_remove(struct platform_device *pdev)
+{
+       struct vx855_gpio *vg = platform_get_drvdata(pdev);
+       struct resource *res;
+
+       if (gpiochip_remove(&vg->gpio))
+               dev_err(&pdev->dev, "unable to remove gpio_chip?\n");
+
+       if (vg->gpi_reserved) {
+               res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+               release_region(res->start, resource_size(res));
+       }
+       if (vg->gpo_reserved) {
+               res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+               release_region(res->start, resource_size(res));
+       }
+
+       platform_set_drvdata(pdev, NULL);
+       kfree(vg);
+       return 0;
+}
+
+static struct platform_driver vx855gpio_driver = {
+       .driver = {
+               .name   = MODULE_NAME,
+               .owner  = THIS_MODULE,
+       },
+       .probe          = vx855gpio_probe,
+       .remove         = __devexit_p(vx855gpio_remove),
+};
+
+static int vx855gpio_init(void)
+{
+       return platform_driver_register(&vx855gpio_driver);
+}
+module_init(vx855gpio_init);
+
+static void vx855gpio_exit(void)
+{
+       platform_driver_unregister(&vx855gpio_driver);
+}
+module_exit(vx855gpio_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>");
+MODULE_DESCRIPTION("GPIO driver for the VIA VX855 chipset");
+MODULE_ALIAS("platform:vx855_gpio");