#include "wl1251_debugfs.h"
#include "wl1251_boot.h"
+/* HACK */
+#ifndef FIF_PROBE_REQ
+#define FIF_PROBE_REQ 0
+#endif
+
void wl1251_enable_interrupts(struct wl1251 *wl)
{
wl->if_ops->enable_irq(wl);
}
wl->nvs_len = fw->size;
- wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+ wl->nvs = kmemdup(fw->data, wl->nvs_len, GFP_KERNEL);
if (!wl->nvs) {
wl1251_error("could not allocate memory for the nvs file");
goto out;
}
- memcpy(wl->nvs, fw->data, wl->nvs_len);
-
ret = 0;
out:
goto out;
}
- /* No NVS from netlink, try to get it from the filesystem */
- if (wl->nvs == NULL) {
+ if (wl->nvs == NULL && !wl->use_eeprom) {
+ /* No NVS from netlink, try to get it from the filesystem */
ret = wl1251_fetch_nvs(wl);
if (ret < 0)
goto out;
wl1251_tx_complete(wl);
}
- if (intr & (WL1251_ACX_INTR_EVENT_A |
- WL1251_ACX_INTR_EVENT_B)) {
- wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)",
- intr);
- if (intr & WL1251_ACX_INTR_EVENT_A)
- wl1251_event_handle(wl, 0);
- else
- wl1251_event_handle(wl, 1);
+ if (intr & WL1251_ACX_INTR_EVENT_A) {
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_A");
+ wl1251_event_handle(wl, 0);
+ }
+
+ if (intr & WL1251_ACX_INTR_EVENT_B) {
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_B");
+ wl1251_event_handle(wl, 1);
}
if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
mutex_unlock(&wl->mutex);
}
-static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
- u16 beacon_interval, u8 dtim_period)
+/* Atomic irq handler */
+void wl1251_irq(struct wl1251 *wl)
{
- int ret;
+ unsigned long flags;
- ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
- DEFAULT_HW_GEN_MODULATION_TYPE,
- wl->tx_mgmt_frm_rate,
- wl->tx_mgmt_frm_mod);
- if (ret < 0)
- goto out;
+ wl1251_debug(DEBUG_IRQ, "IRQ");
+ /* complete the ELP completion */
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ if (wl->elp_compl) {
+ complete(wl->elp_compl);
+ wl->elp_compl = NULL;
+ }
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
- ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
- dtim_period);
- if (ret < 0)
- goto out;
+ ieee80211_queue_work(wl->hw, &wl->irq_work);
+}
+EXPORT_SYMBOL_GPL(wl1251_irq);
+
+static void wl1251_convert_filters(struct wl1251 *wl,
+ unsigned int mac80211_filters)
+{
+ wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
+
+ if (mac80211_filters & FIF_PROMISC_IN_BSS) {
+ wl->rx_config |= CFG_BSSID_FILTER_EN;
+ wl->rx_config &= ~CFG_UNI_FILTER_EN;
+ }
+ if (mac80211_filters & FIF_ALLMULTI)
+ /*
+ * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
+ * all multicast frames
+ */
+ wl->rx_config &= ~CFG_MC_FILTER_EN;
+ if (mac80211_filters & FIF_FCSFAIL)
+ wl->rx_filter |= CFG_RX_FCS_ERROR;
+ if (mac80211_filters & FIF_BCN_PRBRESP_PROMISC) {
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ wl->rx_config &= ~CFG_SSID_FILTER_EN;
+ }
+ if (mac80211_filters & FIF_CONTROL)
+ wl->rx_filter |= CFG_RX_CTL_EN;
+ if (mac80211_filters & FIF_OTHER_BSS)
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ if (mac80211_filters & FIF_PROBE_REQ)
+ wl->rx_filter |= CFG_RX_PREQ_EN;
/*
- * FIXME: we should wait for JOIN_EVENT_COMPLETE_ID but to simplify
- * locking we just sleep instead, for now
+ * If we have no associated BSSID, the filter must be disabled
+ * or else association will break
*/
- msleep(10);
+ if (is_zero_ether_addr(wl->bssid))
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
-out:
- return ret;
+ wl1251_debug(DEBUG_FILTERS, "rx_config %04x, rx_filter %04x",
+ wl->rx_config, wl->rx_filter);
}
-static void wl1251_filter_work(struct work_struct *work)
+static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+ u16 beacon_interval, u8 dtim_period)
{
- struct wl1251 *wl =
- container_of(work, struct wl1251, filter_work);
int ret;
- mutex_lock(&wl->mutex);
-
- if (wl->state == WL1251_STATE_OFF)
+ ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
+ DEFAULT_HW_GEN_MODULATION_TYPE,
+ wl->tx_mgmt_frm_rate,
+ wl->tx_mgmt_frm_mod);
+ if (ret < 0)
goto out;
- ret = wl1251_ps_elp_wakeup(wl);
+ /* Join uses filters, update them */
+ wl1251_convert_filters(wl, wl->mac80211_filters);
+
+ ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
+ dtim_period);
if (ret < 0)
goto out;
- ret = wl1251_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
- wl->dtim_period);
+ ret = wl1251_event_wait(wl, JOIN_EVENT_COMPLETE_ID, 100);
if (ret < 0)
- goto out_sleep;
-
-out_sleep:
- wl1251_ps_elp_sleep(wl);
+ wl1251_warning("join timeout");
out:
- mutex_unlock(&wl->mutex);
+ return ret;
}
static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct wl1251 *wl = hw->priv;
+ unsigned long flags;
skb_queue_tail(&wl->tx_queue, skb);
* The workqueue is slow to process the tx_queue and we need stop
* the queue here, otherwise the queue will get too long.
*/
- if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_MAX_LENGTH) {
+ if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_HIGH_WATERMARK) {
wl1251_debug(DEBUG_TX, "op_tx: tx_queue full, stop queues");
- ieee80211_stop_queues(wl->hw);
- /*
- * FIXME: this is racy, the variable is not properly
- * protected. Maybe fix this by removing the stupid
- * variable altogether and checking the real queue state?
- */
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ ieee80211_stop_queues(wl->hw);
wl->tx_queue_stopped = true;
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
}
return NETDEV_TX_OK;
static int wl1251_op_start(struct ieee80211_hw *hw)
{
struct wl1251 *wl = hw->priv;
+ struct wiphy *wiphy = hw->wiphy;
int ret = 0;
wl1251_debug(DEBUG_MAC80211, "mac80211 start");
wl1251_info("firmware booted (%s)", wl->fw_ver);
+ /* update hw/fw version info in wiphy struct */
+ wiphy->hw_version = wl->chip_id;
+ strncpy(wiphy->fw_version, wl->fw_ver, sizeof(wiphy->fw_version));
+
out:
if (ret < 0)
wl1251_power_off(wl);
cancel_work_sync(&wl->irq_work);
cancel_work_sync(&wl->tx_work);
- cancel_work_sync(&wl->filter_work);
mutex_lock(&wl->mutex);
wl->rx_last_id = 0;
wl->next_tx_complete = 0;
wl->elp = false;
- wl->psm = 0;
+ wl->station_mode = STATION_ACTIVE_MODE;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
wl->channel = WL1251_DEFAULT_CHANNEL;
if (channel != wl->channel) {
wl->channel = channel;
- ret = wl1251_join(wl, wl->bss_type, wl->channel,
- wl->beacon_int, wl->dtim_period);
+ /*
+ * Use ENABLE_RX command for channel switching when no
+ * interface is present (monitor mode only).
+ * This leaves the tx path disabled in firmware, whereas
+ * the usual JOIN command seems to transmit some frames
+ * at firmware level.
+ */
+ if (wl->vif == NULL) {
+ ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1);
+ } else {
+ ret = wl1251_join(wl, wl->bss_type, wl->channel,
+ wl->beacon_int, wl->dtim_period);
+ }
if (ret < 0)
goto out_sleep;
}
wl->psm_requested = false;
- if (wl->psm) {
+ if (wl->station_mode != STATION_ACTIVE_MODE) {
+ ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ goto out_sleep;
+ }
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+ if (conf->flags & IEEE80211_CONF_IDLE) {
+ ret = wl1251_ps_set_mode(wl, STATION_IDLE);
+ if (ret < 0)
+ goto out_sleep;
+ } else {
ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
if (ret < 0)
goto out_sleep;
+ ret = wl1251_join(wl, wl->bss_type, wl->channel,
+ wl->beacon_int, wl->dtim_period);
+ if (ret < 0)
+ goto out_sleep;
}
}
FIF_FCSFAIL | \
FIF_BCN_PRBRESP_PROMISC | \
FIF_CONTROL | \
- FIF_OTHER_BSS)
+ FIF_OTHER_BSS | \
+ FIF_PROBE_REQ)
static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed,
unsigned int *total,u64 multicast)
{
struct wl1251 *wl = hw->priv;
+ int ret;
wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
+ wl1251_debug(DEBUG_FILTERS, "configure filter %x %x", *total, changed);
*total &= WL1251_SUPPORTED_FILTERS;
changed &= WL1251_SUPPORTED_FILTERS;
/* no filters which we support changed */
return;
- /* FIXME: wl->rx_config and wl->rx_filter are not protected */
+ mutex_lock(&wl->mutex);
- wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
- wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
+ wl->mac80211_filters = *total;
+ wl1251_convert_filters(wl, *total);
- if (*total & FIF_PROMISC_IN_BSS) {
- wl->rx_config |= CFG_BSSID_FILTER_EN;
- wl->rx_config |= CFG_RX_ALL_GOOD;
- }
- if (*total & FIF_ALLMULTI)
- /*
- * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
- * all multicast frames
- */
- wl->rx_config &= ~CFG_MC_FILTER_EN;
- if (*total & FIF_FCSFAIL)
- wl->rx_filter |= CFG_RX_FCS_ERROR;
- if (*total & FIF_BCN_PRBRESP_PROMISC) {
- wl->rx_config &= ~CFG_BSSID_FILTER_EN;
- wl->rx_config &= ~CFG_SSID_FILTER_EN;
- }
- if (*total & FIF_CONTROL)
- wl->rx_filter |= CFG_RX_CTL_EN;
- if (*total & FIF_OTHER_BSS)
- wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+ if (wl->state == WL1251_STATE_OFF)
+ goto out;
- /*
- * FIXME: workqueues need to be properly cancelled on stop(), for
- * now let's just disable changing the filter settings. They will
- * be updated any on config().
- */
- /* schedule_work(&wl->filter_work); */
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ /* apply configured filters */
+ wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
}
/* HW encryption */
ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
req->n_channels, WL1251_SCAN_NUM_PROBES);
if (ret < 0) {
+ wl1251_debug(DEBUG_SCAN, "scan failed %d", ret);
wl->scanning = false;
goto out_sleep;
}
if (changed & BSS_CHANGED_BEACON) {
beacon = ieee80211_beacon_get(hw, vif);
+ if (!beacon)
+ goto out_sleep;
+
ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
beacon->len);
.conf_tx = wl1251_op_conf_tx,
};
+static int wl1251_read_eeprom_byte(struct wl1251 *wl, off_t offset, u8 *data)
+{
+ unsigned long timeout;
+
+ wl1251_reg_write32(wl, EE_ADDR, offset);
+ wl1251_reg_write32(wl, EE_CTL, EE_CTL_READ);
+
+ /* EE_CTL_READ clears when data is ready */
+ timeout = jiffies + msecs_to_jiffies(100);
+ while (1) {
+ if (!(wl1251_reg_read32(wl, EE_CTL) & EE_CTL_READ))
+ break;
+
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ msleep(1);
+ }
+
+ *data = wl1251_reg_read32(wl, EE_DATA);
+ return 0;
+}
+
+static int wl1251_read_eeprom(struct wl1251 *wl, off_t offset,
+ u8 *data, size_t len)
+{
+ size_t i;
+ int ret;
+
+ wl1251_reg_write32(wl, EE_START, 0);
+
+ for (i = 0; i < len; i++) {
+ ret = wl1251_read_eeprom_byte(wl, offset + i, &data[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wl1251_read_eeprom_mac(struct wl1251 *wl)
+{
+ u8 mac[ETH_ALEN];
+ int i, ret;
+
+ wl1251_set_partition(wl, 0, 0, REGISTERS_BASE, REGISTERS_DOWN_SIZE);
+
+ ret = wl1251_read_eeprom(wl, 0x1c, mac, sizeof(mac));
+ if (ret < 0) {
+ wl1251_warning("failed to read MAC address from EEPROM");
+ return ret;
+ }
+
+ /* MAC is stored in reverse order */
+ for (i = 0; i < ETH_ALEN; i++)
+ wl->mac_addr[i] = mac[ETH_ALEN - i - 1];
+
+ return 0;
+}
+
static int wl1251_register_hw(struct wl1251 *wl)
{
int ret;
IEEE80211_HW_BEACON_FILTER |
IEEE80211_HW_SUPPORTS_UAPSD;
- wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
wl->hw->wiphy->max_scan_ssids = 1;
wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1251_band_2ghz;
wl->hw->queues = 4;
+ if (wl->use_eeprom)
+ wl1251_read_eeprom_mac(wl);
+
ret = wl1251_register_hw(wl);
if (ret)
goto out;
skb_queue_head_init(&wl->tx_queue);
- INIT_WORK(&wl->filter_work, wl1251_filter_work);
INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->scanning = false;
wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
wl->elp = false;
- wl->psm = 0;
+ wl->station_mode = STATION_ACTIVE_MODE;
wl->psm_requested = false;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
-MODULE_ALIAS("spi:wl1251");
MODULE_FIRMWARE(WL1251_FW_NAME);