drivers/net/wireless/rt2x00/rt2800usb.c

   1 /*
   2         Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
   3         Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
   4         Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
   5         Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
   6         Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
   7         <http://rt2x00.serialmonkey.com>
   8
   9         This program is free software; you can redistribute it and/or modify
  10         it under the terms of the GNU General Public License as published by
  11         the Free Software Foundation; either version 2 of the License, or
  12         (at your option) any later version.
  13
  14         This program is distributed in the hope that it will be useful,
  15         but WITHOUT ANY WARRANTY; without even the implied warranty of
  16         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17         GNU General Public License for more details.
  18
  19         You should have received a copy of the GNU General Public License
  20         along with this program; if not, write to the
  21         Free Software Foundation, Inc.,
  22         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  23  */
  24
  25 /*
  26         Module: rt2800usb
  27         Abstract: rt2800usb device specific routines.
  28         Supported chipsets: RT2800U.
  29  */
  30
  31 #include <linux/crc-ccitt.h>
  32 #include <linux/delay.h>
  33 #include <linux/etherdevice.h>
  34 #include <linux/init.h>
  35 #include <linux/kernel.h>
  36 #include <linux/module.h>
  37 #include <linux/usb.h>
  38
  39 #include "rt2x00.h"
  40 #include "rt2x00usb.h"
  41 #include "rt2800lib.h"
  42 #include "rt2800.h"
  43 #include "rt2800usb.h"
  44
  45 /*
  46  * Allow hardware encryption to be disabled.
  47  */
  48 static int modparam_nohwcrypt = 1;
  49 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  50 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  51
  52 /*
  53  * Firmware functions
  54  */
  55 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
  56 {
  57         return FIRMWARE_RT2870;
  58 }
  59
  60 static bool rt2800usb_check_crc(const u8 *data, const size_t len)
  61 {
  62         u16 fw_crc;
  63         u16 crc;
  64
  65         /*
  66          * The last 2 bytes in the firmware array are the crc checksum itself,
  67          * this means that we should never pass those 2 bytes to the crc
  68          * algorithm.
  69          */
  70         fw_crc = (data[len - 2] << 8 | data[len - 1]);
  71
  72         /*
  73          * Use the crc ccitt algorithm.
  74          * This will return the same value as the legacy driver which
  75          * used bit ordering reversion on the both the firmware bytes
  76          * before input input as well as on the final output.
  77          * Obviously using crc ccitt directly is much more efficient.
  78          */
  79         crc = crc_ccitt(~0, data, len - 2);
  80
  81         /*
  82          * There is a small difference between the crc-itu-t + bitrev and
  83          * the crc-ccitt crc calculation. In the latter method the 2 bytes
  84          * will be swapped, use swab16 to convert the crc to the correct
  85          * value.
  86          */
  87         crc = swab16(crc);
  88
  89         return fw_crc == crc;
  90 }
  91
  92 static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
  93                                     const u8 *data, const size_t len)
  94 {
  95         size_t offset = 0;
  96
  97         /*
  98          * Firmware files:
  99          * There are 2 variations of the rt2870 firmware.
 100          * a) size: 4kb
 101          * b) size: 8kb
 102          * Note that (b) contains 2 separate firmware blobs of 4k
 103          * within the file. The first blob is the same firmware as (a),
 104          * but the second blob is for the additional chipsets.
 105          */
 106         if (len != 4096 && len != 8192)
 107                 return FW_BAD_LENGTH;
 108
 109         /*
 110          * Check if we need the upper 4kb firmware data or not.
 111          */
 112         if ((len == 4096) &&
 113             !rt2x00_rt(rt2x00dev, RT2860) &&
 114             !rt2x00_rt(rt2x00dev, RT2872) &&
 115             !rt2x00_rt(rt2x00dev, RT3070))
 116                 return FW_BAD_VERSION;
 117
 118         /*
 119          * 8kb firmware files must be checked as if it were
 120          * 2 separate firmware files.
 121          */
 122         while (offset < len) {
 123                 if (!rt2800usb_check_crc(data + offset, 4096))
 124                         return FW_BAD_CRC;
 125
 126                 offset += 4096;
 127         }
 128
 129         return FW_OK;
 130 }
 131
 132 static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 133                                    const u8 *data, const size_t len)
 134 {
 135         unsigned int i;
 136         int status;
 137         u32 reg;
 138         u32 offset;
 139         u32 length;
 140
 141         /*
 142          * Check which section of the firmware we need.
 143          */
 144         if (rt2x00_rt(rt2x00dev, RT2860) ||
 145             rt2x00_rt(rt2x00dev, RT2872) ||
 146             rt2x00_rt(rt2x00dev, RT3070)) {
 147                 offset = 0;
 148                 length = 4096;
 149         } else {
 150                 offset = 4096;
 151                 length = 4096;
 152         }
 153
 154         /*
 155          * Wait for stable hardware.
 156          */
 157         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 158                 rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 159                 if (reg && reg != ~0)
 160                         break;
 161                 msleep(1);
 162         }
 163
 164         if (i == REGISTER_BUSY_COUNT) {
 165                 ERROR(rt2x00dev, "Unstable hardware.\n");
 166                 return -EBUSY;
 167         }
 168
 169         /*
 170          * Write firmware to device.
 171          */
 172         rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
 173                                             USB_VENDOR_REQUEST_OUT,
 174                                             FIRMWARE_IMAGE_BASE,
 175                                             data + offset, length,
 176                                             REGISTER_TIMEOUT32(length));
 177
 178         rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 179         rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
 180
 181         /*
 182          * Send firmware request to device to load firmware,
 183          * we need to specify a long timeout time.
 184          */
 185         status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
 186                                              0, USB_MODE_FIRMWARE,
 187                                              REGISTER_TIMEOUT_FIRMWARE);
 188         if (status < 0) {
 189                 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
 190                 return status;
 191         }
 192
 193         msleep(10);
 194         rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 195
 196         /*
 197          * Send signal to firmware during boot time.
 198          */
 199         rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
 200
 201         if (rt2x00_rt(rt2x00dev, RT3070) ||
 202             rt2x00_rt(rt2x00dev, RT3071) ||
 203             rt2x00_rt(rt2x00dev, RT3572)) {
 204                 udelay(200);
 205                 rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
 206                 udelay(10);
 207         }
 208
 209         /*
 210          * Wait for device to stabilize.
 211          */
 212         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 213                 rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 214                 if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
 215                         break;
 216                 msleep(1);
 217         }
 218
 219         if (i == REGISTER_BUSY_COUNT) {
 220                 ERROR(rt2x00dev, "PBF system register not ready.\n");
 221                 return -EBUSY;
 222         }
 223
 224         /*
 225          * Initialize firmware.
 226          */
 227         rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
 228         rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 229         msleep(1);
 230
 231         return 0;
 232 }
 233
 234 /*
 235  * Device state switch handlers.
 236  */
 237 static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 238                                 enum dev_state state)
 239 {
 240         u32 reg;
 241
 242         rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 243         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
 244                            (state == STATE_RADIO_RX_ON) ||
 245                            (state == STATE_RADIO_RX_ON_LINK));
 246         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 247 }
 248
 249 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 250 {
 251         u32 reg;
 252         u16 word;
 253
 254         /*
 255          * Initialize all registers.
 256          */
 257         if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
 258                      rt2800_init_registers(rt2x00dev) ||
 259                      rt2800_init_bbp(rt2x00dev) ||
 260                      rt2800_init_rfcsr(rt2x00dev)))
 261                 return -EIO;
 262
 263         rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 264         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
 265         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 266
 267         udelay(50);
 268
 269         rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 270         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
 271         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
 272         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
 273         rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 274
 275
 276         rt2800_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 277         rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
 278         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
 279         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
 280         /*
 281          * Total room for RX frames in kilobytes, PBF might still exceed
 282          * this limit so reduce the number to prevent errors.
 283          */
 284         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
 285                            ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3);
 286         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
 287         rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
 288         rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg);
 289
 290         rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 291         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
 292         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
 293         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 294
 295         /*
 296          * Initialize LED control
 297          */
 298         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
 299         rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
 300                               word & 0xff, (word >> 8) & 0xff);
 301
 302         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
 303         rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
 304                               word & 0xff, (word >> 8) & 0xff);
 305
 306         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
 307         rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
 308                               word & 0xff, (word >> 8) & 0xff);
 309
 310         return 0;
 311 }
 312
 313 static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 314 {
 315         u32 reg;
 316
 317         rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 318         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 319         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
 320         rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 321
 322         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
 323         rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
 324         rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
 325
 326         /* Wait for DMA, ignore error */
 327         rt2800_wait_wpdma_ready(rt2x00dev);
 328
 329         rt2x00usb_disable_radio(rt2x00dev);
 330 }
 331
 332 static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
 333                                enum dev_state state)
 334 {
 335         if (state == STATE_AWAKE)
 336                 rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
 337         else
 338                 rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
 339
 340         return 0;
 341 }
 342
 343 static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 344                                       enum dev_state state)
 345 {
 346         int retval = 0;
 347
 348         switch (state) {
 349         case STATE_RADIO_ON:
 350                 /*
 351                  * Before the radio can be enabled, the device first has
 352                  * to be woken up. After that it needs a bit of time
 353                  * to be fully awake and then the radio can be enabled.
 354                  */
 355                 rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
 356                 msleep(1);
 357                 retval = rt2800usb_enable_radio(rt2x00dev);
 358                 break;
 359         case STATE_RADIO_OFF:
 360                 /*
 361                  * After the radio has been disabled, the device should
 362                  * be put to sleep for powersaving.
 363                  */
 364                 rt2800usb_disable_radio(rt2x00dev);
 365                 rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
 366                 break;
 367         case STATE_RADIO_RX_ON:
 368         case STATE_RADIO_RX_ON_LINK:
 369         case STATE_RADIO_RX_OFF:
 370         case STATE_RADIO_RX_OFF_LINK:
 371                 rt2800usb_toggle_rx(rt2x00dev, state);
 372                 break;
 373         case STATE_RADIO_IRQ_ON:
 374         case STATE_RADIO_IRQ_OFF:
 375                 /* No support, but no error either */
 376                 break;
 377         case STATE_DEEP_SLEEP:
 378         case STATE_SLEEP:
 379         case STATE_STANDBY:
 380         case STATE_AWAKE:
 381                 retval = rt2800usb_set_state(rt2x00dev, state);
 382                 break;
 383         default:
 384                 retval = -ENOTSUPP;
 385                 break;
 386         }
 387
 388         if (unlikely(retval))
 389                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
 390                       state, retval);
 391
 392         return retval;
 393 }
 394
 395 /*
 396  * TX descriptor initialization
 397  */
 398 static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 399                                     struct sk_buff *skb,
 400                                     struct txentry_desc *txdesc)
 401 {
 402         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 403         __le32 *txi = skbdesc->desc;
 404         __le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)];
 405         u32 word;
 406
 407         /*
 408          * Initialize TX Info descriptor
 409          */
 410         rt2x00_desc_read(txwi, 0, &word);
 411         rt2x00_set_field32(&word, TXWI_W0_FRAG,
 412                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
 413         rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
 414         rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
 415         rt2x00_set_field32(&word, TXWI_W0_TS,
 416                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
 417         rt2x00_set_field32(&word, TXWI_W0_AMPDU,
 418                            test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
 419         rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
 420         rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
 421         rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
 422         rt2x00_set_field32(&word, TXWI_W0_BW,
 423                            test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
 424         rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
 425                            test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
 426         rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
 427         rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
 428         rt2x00_desc_write(txwi, 0, word);
 429
 430         rt2x00_desc_read(txwi, 1, &word);
 431         rt2x00_set_field32(&word, TXWI_W1_ACK,
 432                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
 433         rt2x00_set_field32(&word, TXWI_W1_NSEQ,
 434                            test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 435         rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
 436         rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
 437                            test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
 438                            txdesc->key_idx : 0xff);
 439         rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
 440                            skb->len - txdesc->l2pad);
 441         rt2x00_set_field32(&word, TXWI_W1_PACKETID,
 442                            skbdesc->entry->queue->qid + 1);
 443         rt2x00_desc_write(txwi, 1, word);
 444
 445         /*
 446          * Always write 0 to IV/EIV fields, hardware will insert the IV
 447          * from the IVEIV register when TXINFO_W0_WIV is set to 0.
 448          * When TXINFO_W0_WIV is set to 1 it will use the IV data
 449          * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
 450          * crypto entry in the registers should be used to encrypt the frame.
 451          */
 452         _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
 453         _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
 454
 455         /*
 456          * Initialize TX descriptor
 457          */
 458         rt2x00_desc_read(txi, 0, &word);
 459         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
 460                            skb->len + TXWI_DESC_SIZE);
 461         rt2x00_set_field32(&word, TXINFO_W0_WIV,
 462                            !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 463         rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
 464         rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
 465         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
 466         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
 467                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
 468         rt2x00_desc_write(txi, 0, word);
 469 }
 470
 471 /*
 472  * TX data initialization
 473  */
 474 static void rt2800usb_write_beacon(struct queue_entry *entry)
 475 {
 476         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 477         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 478         unsigned int beacon_base;
 479         u32 reg;
 480
 481         /*
 482          * Add the descriptor in front of the skb.
 483          */
 484         skb_push(entry->skb, entry->queue->desc_size);
 485         memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
 486         skbdesc->desc = entry->skb->data;
 487
 488         /*
 489          * Disable beaconing while we are reloading the beacon data,
 490          * otherwise we might be sending out invalid data.
 491          */
 492         rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 493         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
 494         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 495
 496         /*
 497          * Write entire beacon with descriptor to register.
 498          */
 499         beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
 500         rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
 501                                             USB_VENDOR_REQUEST_OUT, beacon_base,
 502                                             entry->skb->data, entry->skb->len,
 503                                             REGISTER_TIMEOUT32(entry->skb->len));
 504
 505         /*
 506          * Clean up the beacon skb.
 507          */
 508         dev_kfree_skb(entry->skb);
 509         entry->skb = NULL;
 510 }
 511
 512 static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 513 {
 514         int length;
 515
 516         /*
 517          * The length _must_ include 4 bytes padding,
 518          * it should always be multiple of 4,
 519          * but it must _not_ be a multiple of the USB packet size.
 520          */
 521         length = roundup(entry->skb->len + 4, 4);
 522         length += (4 * !(length % entry->queue->usb_maxpacket));
 523
 524         return length;
 525 }
 526
 527 static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 528                                     const enum data_queue_qid queue)
 529 {
 530         u32 reg;
 531
 532         if (queue != QID_BEACON) {
 533                 rt2x00usb_kick_tx_queue(rt2x00dev, queue);
 534                 return;
 535         }
 536
 537         rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 538         if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
 539                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
 540                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
 541                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
 542                 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 543         }
 544 }
 545
 546 /*
 547  * RX control handlers
 548  */
 549 static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 550                                   struct rxdone_entry_desc *rxdesc)
 551 {
 552         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 553         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 554         __le32 *rxi = (__le32 *)entry->skb->data;
 555         __le32 *rxwi;
 556         __le32 *rxd;
 557         u32 rxi0;
 558         u32 rxwi0;
 559         u32 rxwi1;
 560         u32 rxwi2;
 561         u32 rxwi3;
 562         u32 rxd0;
 563         int rx_pkt_len;
 564
 565         /*
 566          * RX frame format is :
 567          * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
 568          *          |<------------ rx_pkt_len -------------->|
 569          */
 570         rt2x00_desc_read(rxi, 0, &rxi0);
 571         rx_pkt_len = rt2x00_get_field32(rxi0, RXINFO_W0_USB_DMA_RX_PKT_LEN);
 572
 573         rxwi = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE);
 574
 575         /*
 576          * FIXME : we need to check for rx_pkt_len validity
 577          */
 578         rxd = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE + rx_pkt_len);
 579
 580         /*
 581          * Copy descriptor to the skbdesc->desc buffer, making it safe from
 582          * moving of frame data in rt2x00usb.
 583          */
 584         memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
 585
 586         /*
 587          * It is now safe to read the descriptor on all architectures.
 588          */
 589         rt2x00_desc_read(rxwi, 0, &rxwi0);
 590         rt2x00_desc_read(rxwi, 1, &rxwi1);
 591         rt2x00_desc_read(rxwi, 2, &rxwi2);
 592         rt2x00_desc_read(rxwi, 3, &rxwi3);
 593         rt2x00_desc_read(rxd, 0, &rxd0);
 594
 595         if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
 596                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 597
 598         if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
 599                 rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
 600                 rxdesc->cipher_status =
 601                     rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
 602         }
 603
 604         if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
 605                 /*
 606                  * Hardware has stripped IV/EIV data from 802.11 frame during
 607                  * decryption. Unfortunately the descriptor doesn't contain
 608                  * any fields with the EIV/IV data either, so they can't
 609                  * be restored by rt2x00lib.
 610                  */
 611                 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
 612
 613                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 614                         rxdesc->flags |= RX_FLAG_DECRYPTED;
 615                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
 616                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 617         }
 618
 619         if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
 620                 rxdesc->dev_flags |= RXDONE_MY_BSS;
 621
 622         if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
 623                 rxdesc->dev_flags |= RXDONE_L2PAD;
 624
 625         if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
 626                 rxdesc->flags |= RX_FLAG_SHORT_GI;
 627
 628         if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
 629                 rxdesc->flags |= RX_FLAG_40MHZ;
 630
 631         /*
 632          * Detect RX rate, always use MCS as signal type.
 633          */
 634         rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
 635         rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
 636         rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
 637
 638         /*
 639          * Mask of 0x8 bit to remove the short preamble flag.
 640          */
 641         if (rxdesc->rate_mode == RATE_MODE_CCK)
 642                 rxdesc->signal &= ~0x8;
 643
 644         rxdesc->rssi =
 645             (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
 646              rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
 647
 648         rxdesc->noise =
 649             (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
 650              rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
 651
 652         rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
 653
 654         /*
 655          * Remove RXWI descriptor from start of buffer.
 656          */
 657         skb_pull(entry->skb, skbdesc->desc_len);
 658 }
 659
 660 /*
 661  * Device probe functions.
 662  */
 663 static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 664 {
 665         if (rt2800_efuse_detect(rt2x00dev))
 666                 rt2800_read_eeprom_efuse(rt2x00dev);
 667         else
 668                 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
 669                                       EEPROM_SIZE);
 670
 671         return rt2800_validate_eeprom(rt2x00dev);
 672 }
 673
 674 static const struct rt2800_ops rt2800usb_rt2800_ops = {
 675         .register_read          = rt2x00usb_register_read,
 676         .register_read_lock     = rt2x00usb_register_read_lock,
 677         .register_write         = rt2x00usb_register_write,
 678         .register_write_lock    = rt2x00usb_register_write_lock,
 679
 680         .register_multiread     = rt2x00usb_register_multiread,
 681         .register_multiwrite    = rt2x00usb_register_multiwrite,
 682
 683         .regbusy_read           = rt2x00usb_regbusy_read,
 684 };
 685
 686 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 687 {
 688         int retval;
 689
 690         rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops;
 691
 692         /*
 693          * Allocate eeprom data.
 694          */
 695         retval = rt2800usb_validate_eeprom(rt2x00dev);
 696         if (retval)
 697                 return retval;
 698
 699         retval = rt2800_init_eeprom(rt2x00dev);
 700         if (retval)
 701                 return retval;
 702
 703         /*
 704          * Initialize hw specifications.
 705          */
 706         retval = rt2800_probe_hw_mode(rt2x00dev);
 707         if (retval)
 708                 return retval;
 709
 710         /*
 711          * This device has multiple filters for control frames
 712          * and has a separate filter for PS Poll frames.
 713          */
 714         __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
 715         __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
 716
 717         /*
 718          * This device requires firmware.
 719          */
 720         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
 721         __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
 722         if (!modparam_nohwcrypt)
 723                 __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 724
 725         /*
 726          * Set the rssi offset.
 727          */
 728         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
 729
 730         return 0;
 731 }
 732
 733 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 734         .probe_hw               = rt2800usb_probe_hw,
 735         .get_firmware_name      = rt2800usb_get_firmware_name,
 736         .check_firmware         = rt2800usb_check_firmware,
 737         .load_firmware          = rt2800usb_load_firmware,
 738         .initialize             = rt2x00usb_initialize,
 739         .uninitialize           = rt2x00usb_uninitialize,
 740         .clear_entry            = rt2x00usb_clear_entry,
 741         .set_device_state       = rt2800usb_set_device_state,
 742         .rfkill_poll            = rt2800_rfkill_poll,
 743         .link_stats             = rt2800_link_stats,
 744         .reset_tuner            = rt2800_reset_tuner,
 745         .link_tuner             = rt2800_link_tuner,
 746         .write_tx_desc          = rt2800usb_write_tx_desc,
 747         .write_tx_data          = rt2x00usb_write_tx_data,
 748         .write_beacon           = rt2800usb_write_beacon,
 749         .get_tx_data_len        = rt2800usb_get_tx_data_len,
 750         .kick_tx_queue          = rt2800usb_kick_tx_queue,
 751         .kill_tx_queue          = rt2x00usb_kill_tx_queue,
 752         .fill_rxdone            = rt2800usb_fill_rxdone,
 753         .config_shared_key      = rt2800_config_shared_key,
 754         .config_pairwise_key    = rt2800_config_pairwise_key,
 755         .config_filter          = rt2800_config_filter,
 756         .config_intf            = rt2800_config_intf,
 757         .config_erp             = rt2800_config_erp,
 758         .config_ant             = rt2800_config_ant,
 759         .config                 = rt2800_config,
 760 };
 761
 762 static const struct data_queue_desc rt2800usb_queue_rx = {
 763         .entry_num              = RX_ENTRIES,
 764         .data_size              = AGGREGATION_SIZE,
 765         .desc_size              = RXINFO_DESC_SIZE + RXWI_DESC_SIZE,
 766         .priv_size              = sizeof(struct queue_entry_priv_usb),
 767 };
 768
 769 static const struct data_queue_desc rt2800usb_queue_tx = {
 770         .entry_num              = TX_ENTRIES,
 771         .data_size              = AGGREGATION_SIZE,
 772         .desc_size              = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 773         .priv_size              = sizeof(struct queue_entry_priv_usb),
 774 };
 775
 776 static const struct data_queue_desc rt2800usb_queue_bcn = {
 777         .entry_num              = 8 * BEACON_ENTRIES,
 778         .data_size              = MGMT_FRAME_SIZE,
 779         .desc_size              = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 780         .priv_size              = sizeof(struct queue_entry_priv_usb),
 781 };
 782
 783 static const struct rt2x00_ops rt2800usb_ops = {
 784         .name                   = KBUILD_MODNAME,
 785         .max_sta_intf           = 1,
 786         .max_ap_intf            = 8,
 787         .eeprom_size            = EEPROM_SIZE,
 788         .rf_size                = RF_SIZE,
 789         .tx_queues              = NUM_TX_QUEUES,
 790         .extra_tx_headroom      = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 791         .rx                     = &rt2800usb_queue_rx,
 792         .tx                     = &rt2800usb_queue_tx,
 793         .bcn                    = &rt2800usb_queue_bcn,
 794         .lib                    = &rt2800usb_rt2x00_ops,
 795         .hw                     = &rt2800_mac80211_ops,
 796 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 797         .debugfs                = &rt2800_rt2x00debug,
 798 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 799 };
 800
 801 /*
 802  * rt2800usb module information.
 803  */
 804 static struct usb_device_id rt2800usb_device_table[] = {
 805         /* Abocom */
 806         { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
 807         { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
 808         { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
 809         /* Amit */
 810         { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
 811         /* Askey */
 812         { USB_DEVICE(0x1690, 0x0740), USB_DEVICE_DATA(&rt2800usb_ops) },
 813         /* ASUS */
 814         { USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
 815         { USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
 816         { USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
 817         /* AzureWave */
 818         { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
 819         /* Belkin */
 820         { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
 821         { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
 822         { USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
 823         /* Buffalo */
 824         { USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
 825         /* Conceptronic */
 826         { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
 827         { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
 828         { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
 829         { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
 830         { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
 831         { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
 832         { USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) },
 833         /* Corega */
 834         { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
 835         { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
 836         { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
 837         /* D-Link */
 838         { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
 839         { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
 840         /* Edimax */
 841         { USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
 842         { USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
 843         /* EnGenius */
 844         { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
 845         { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
 846         /* Gigabyte */
 847         { USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
 848         /* Hawking */
 849         { USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
 850         { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
 851         /* Linksys */
 852         { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
 853         { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
 854         /* Logitec */
 855         { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
 856         { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
 857         { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
 858         /* Motorola */
 859         { USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
 860         /* MSI */
 861         { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
 862         /* Philips */
 863         { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
 864         /* Planex */
 865         { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
 866         /* Ralink */
 867         { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
 868         { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
 869         /* Samsung */
 870         { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
 871         /* Siemens */
 872         { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
 873         /* Sitecom */
 874         { USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
 875         { USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
 876         { USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
 877         { USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
 878         { USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
 879         { USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
 880         /* SMC */
 881         { USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
 882         { USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
 883         { USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
 884         { USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
 885         { USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
 886         { USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
 887         /* Sparklan */
 888         { USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
 889         /* Sweex */
 890         { USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) },
 891         /* U-Media*/
 892         { USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
 893         /* ZCOM */
 894         { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
 895         { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
 896         /* Zinwell */
 897         { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
 898         { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
 899         /* Zyxel */
 900         { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
 901 #ifdef CONFIG_RT2800USB_RT30XX
 902         /* Abocom */
 903         { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
 904         { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
 905         { USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
 906         /* AirTies */
 907         { USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
 908         /* AzureWave */
 909         { USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
 910         /* Conceptronic */
 911         { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
 912         /* Corega */
 913         { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
 914         /* D-Link */
 915         { USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
 916         { USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) },
 917         { USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) },
 918         { USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
 919         /* Edimax */
 920         { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
 921         /* Encore */
 922         { USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
 923         /* EnGenius */
 924         { USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
 925         { USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
 926         { USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
 927         /* Gigabyte */
 928         { USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
 929         /* I-O DATA */
 930         { USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
 931         /* MSI */
 932         { USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
 933         /* Pegatron */
 934         { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
 935         { USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
 936         /* Planex */
 937         { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
 938         /* Quanta */
 939         { USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
 940         /* Ralink */
 941         { USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
 942         { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
 943         { USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
 944         { USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
 945         /* Sitecom */
 946         { USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
 947         { USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
 948         /* SMC */
 949         { USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
 950         /* Zinwell */
 951         { USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
 952         { USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
 953 #endif
 954 #ifdef CONFIG_RT2800USB_RT35XX
 955         /* Askey */
 956         { USB_DEVICE(0x1690, 0x0744), USB_DEVICE_DATA(&rt2800usb_ops) },
 957         /* Cisco */
 958         { USB_DEVICE(0x167b, 0x4001), USB_DEVICE_DATA(&rt2800usb_ops) },
 959         /* EnGenius */
 960         { USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
 961         /* I-O DATA */
 962         { USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
 963         /* Ralink */
 964         { USB_DEVICE(0x148f, 0x3370), USB_DEVICE_DATA(&rt2800usb_ops) },
 965         { USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
 966         { USB_DEVICE(0x148f, 0x8070), USB_DEVICE_DATA(&rt2800usb_ops) },
 967         /* Sitecom */
 968         { USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
 969         /* Zinwell */
 970         { USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
 971 #endif
 972 #ifdef CONFIG_RT2800USB_UNKNOWN
 973         /*
 974          * Unclear what kind of devices these are (they aren't supported by the
 975          * vendor driver).
 976          */
 977         /* Allwin */
 978         { USB_DEVICE(0x8516, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
 979         { USB_DEVICE(0x8516, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
 980         { USB_DEVICE(0x8516, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
 981         { USB_DEVICE(0x8516, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
 982         { USB_DEVICE(0x8516, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
 983         { USB_DEVICE(0x8516, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
 984         { USB_DEVICE(0x8516, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
 985         /* Amigo */
 986         { USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
 987         { USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
 988         /* Askey */
 989         { USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) },
 990         /* ASUS */
 991         { USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
 992         { USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
 993         { USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
 994         { USB_DEVICE(0x0b05, 0x1790), USB_DEVICE_DATA(&rt2800usb_ops) },
 995         { USB_DEVICE(0x1761, 0x0b05), USB_DEVICE_DATA(&rt2800usb_ops) },
 996         /* AzureWave */
 997         { USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
 998         { USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
 999         { USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
1000         /* Belkin */
1001         { USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) },
1002         /* Buffalo */
1003         { USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
1004         { USB_DEVICE(0x0411, 0x0148), USB_DEVICE_DATA(&rt2800usb_ops) },
1005         { USB_DEVICE(0x0411, 0x0150), USB_DEVICE_DATA(&rt2800usb_ops) },
1006         { USB_DEVICE(0x0411, 0x015d), USB_DEVICE_DATA(&rt2800usb_ops) },
1007         /* Conceptronic */
1008         { USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) },
1009         { USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
1010         /* Corega */
1011         { USB_DEVICE(0x07aa, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
1012         { USB_DEVICE(0x07aa, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
1013         { USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
1014         /* D-Link */
1015         { USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) },
1016         { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
1017         { USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) },
1018         { USB_DEVICE(0x07d1, 0x3c16), USB_DEVICE_DATA(&rt2800usb_ops) },
1019         /* Encore */
1020         { USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) },
1021         { USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
1022         /* EnGenius */
1023         { USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) },
1024         { USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) },
1025         { USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) },
1026         /* Gemtek */
1027         { USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
1028         /* Gigabyte */
1029         { USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) },
1030         /* Hawking */
1031         { USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
1032         { USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
1033         /* I-O DATA */
1034         { USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) },
1035         { USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) },
1036         /* LevelOne */
1037         { USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
1038         { USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
1039         /* Linksys */
1040         { USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
1041         { USB_DEVICE(0x1737, 0x0078), USB_DEVICE_DATA(&rt2800usb_ops) },
1042         { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
1043         /* Motorola */
1044         { USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
1045         /* MSI */
1046         { USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) },
1047         { USB_DEVICE(0x0db0, 0x3822), USB_DEVICE_DATA(&rt2800usb_ops) },
1048         { USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) },
1049         { USB_DEVICE(0x0db0, 0x3871), USB_DEVICE_DATA(&rt2800usb_ops) },
1050         { USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) },
1051         { USB_DEVICE(0x0db0, 0x822a), USB_DEVICE_DATA(&rt2800usb_ops) },
1052         { USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) },
1053         { USB_DEVICE(0x0db0, 0x871a), USB_DEVICE_DATA(&rt2800usb_ops) },
1054         { USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) },
1055         /* Ovislink */
1056         { USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
1057         /* Para */
1058         { USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) },
1059         /* Pegatron */
1060         { USB_DEVICE(0x05a6, 0x0101), USB_DEVICE_DATA(&rt2800usb_ops) },
1061         { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
1062         { USB_DEVICE(0x1d4d, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
1063         /* Planex */
1064         { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
1065         /* Qcom */
1066         { USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) },
1067         /* Sitecom */
1068         { USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
1069         { USB_DEVICE(0x0df6, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
1070         { USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
1071         { USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
1072         { USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) },
1073         { USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) },
1074         { USB_DEVICE(0x0df6, 0x004a), USB_DEVICE_DATA(&rt2800usb_ops) },
1075         { USB_DEVICE(0x0df6, 0x004d), USB_DEVICE_DATA(&rt2800usb_ops) },
1076         /* SMC */
1077         { USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
1078         { USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) },
1079         { USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) },
1080         { USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
1081         { USB_DEVICE(0x083a, 0xd522), USB_DEVICE_DATA(&rt2800usb_ops) },
1082         /* Sweex */
1083         { USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) },
1084         { USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) },
1085         /* Zyxel */
1086         { USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) },
1087 #endif
1088         { 0, }
1089 };
1090
1091 MODULE_AUTHOR(DRV_PROJECT);
1092 MODULE_VERSION(DRV_VERSION);
1093 MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
1094 MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
1095 MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
1096 MODULE_FIRMWARE(FIRMWARE_RT2870);
1097 MODULE_LICENSE("GPL");
1098
1099 static struct usb_driver rt2800usb_driver = {
1100         .name           = KBUILD_MODNAME,
1101         .id_table       = rt2800usb_device_table,
1102         .probe          = rt2x00usb_probe,
1103         .disconnect     = rt2x00usb_disconnect,
1104         .suspend        = rt2x00usb_suspend,
1105         .resume         = rt2x00usb_resume,
1106 };
1107
1108 static int __init rt2800usb_init(void)
1109 {
1110         return usb_register(&rt2800usb_driver);
1111 }
1112
1113 static void __exit rt2800usb_exit(void)
1114 {
1115         usb_deregister(&rt2800usb_driver);
1116 }
1117
1118 module_init(rt2800usb_init);
1119 module_exit(rt2800usb_exit);