mmc: omap: don't set wrong voltage select for mmc2
[pandora-u-boot.git] / Makefile
index 9d43499..670e36f 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -23,8 +23,8 @@
 
 VERSION = 2013
 PATCHLEVEL = 01
-SUBLEVEL =
-EXTRAVERSION = -rc2
+SUBLEVEL = 01
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -316,6 +316,7 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
 LIBS-y += drivers/rtc/librtc.o
 LIBS-y += drivers/serial/libserial.o
+LIBS-y += drivers/sound/libsound.o
 LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
 LIBS-y += drivers/twserial/libtws.o
 LIBS-y += drivers/usb/eth/libusb_eth.o
@@ -510,7 +511,7 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-               elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+               elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
                        -o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -554,10 +555,8 @@ GEN_UBOOT = \
                        $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
 else
 GEN_UBOOT = \
-               UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
-               sed  -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
                cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
-                       $$UNDEF_LST $(__OBJS) \
+                       $(__OBJS) \
                        --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
                        -Map u-boot.map -o u-boot
 endif
@@ -590,11 +589,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot
 $(LDSCRIPT):   depend
                $(MAKE) -C $(dir $@) $(notdir $@)
 
-# The following line expands into whole rule which generates u-boot.lst,
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
-$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+$(obj)u-boot.lds: $(LDSCRIPT)
                $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 nand_spl:      $(TIMESTAMP_FILE) $(VERSION_FILE) depend
@@ -727,6 +722,13 @@ tools: $(VERSION_FILE) $(TIMESTAMP_FILE)
        $(MAKE) -C $@ all
 endif  # config.mk
 
+# ARM relocations should all be R_ARM_RELATIVE.
+checkarmreloc: $(obj)u-boot
+       @if test "R_ARM_RELATIVE" != \
+               "`readelf -r $< | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
+               then echo "$< contains relocations other than \
+               R_ARM_RELATIVE"; false; fi
+
 $(VERSION_FILE):
                @mkdir -p $(dir $(VERSION_FILE))
                @( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
@@ -830,7 +832,6 @@ clean:
               $(obj)board/matrix_vision/*/bootscript.img                 \
               $(obj)board/voiceblue/eeprom                               \
               $(obj)u-boot.lds                                           \
-              $(obj)include/u-boot.lst                                   \
               $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]          \
               $(obj)arch/blackfin/cpu/init.{lds,elf}
        @rm -f $(obj)include/bmp_logo.h
@@ -867,8 +868,9 @@ clobber:    tidy
        @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
        @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
        @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
-       @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
-       @rm -f $(obj)MLO
+       @rm -f $(obj)spl/u-boot-spl.lds
+       @rm -f $(obj)MLO MLO.byteswap
+       @rm -f $(obj)SPL
        @rm -f $(obj)tools/xway-swap-bytes
        @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
        @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c