From ee8c9571191e588ede9a220ded807e33c4897d91 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Sat, 30 May 2009 14:00:17 +0100 Subject: [PATCH] RealView: Move the IRQ_* definitions out of the board-*.h files The IRQ_* macros need to be made visible via the mach/irqs.h file but without the additional macros defined in the board-*.h files. Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/core.c | 3 + .../arm/mach-realview/include/mach/board-eb.h | 105 -------------- .../mach-realview/include/mach/board-pb1176.h | 78 ----------- .../mach-realview/include/mach/board-pb11mp.h | 101 -------------- .../mach-realview/include/mach/board-pba8.h | 77 ----------- .../mach-realview/include/mach/board-pbx.h | 95 ------------- arch/arm/mach-realview/include/mach/irqs-eb.h | 129 ++++++++++++++++++ .../mach-realview/include/mach/irqs-pb1176.h | 99 ++++++++++++++ .../mach-realview/include/mach/irqs-pb11mp.h | 122 +++++++++++++++++ .../mach-realview/include/mach/irqs-pba8.h | 98 +++++++++++++ .../arm/mach-realview/include/mach/irqs-pbx.h | 115 ++++++++++++++++ arch/arm/mach-realview/include/mach/irqs.h | 10 +- arch/arm/oprofile/op_model_mpcore.c | 1 + 13 files changed, 572 insertions(+), 461 deletions(-) create mode 100644 arch/arm/mach-realview/include/mach/irqs-eb.h create mode 100644 arch/arm/mach-realview/include/mach/irqs-pb1176.h create mode 100644 arch/arm/mach-realview/include/mach/irqs-pb11mp.h create mode 100644 arch/arm/mach-realview/include/mach/irqs-pba8.h create mode 100644 arch/arm/mach-realview/include/mach/irqs-pbx.h diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 346cbf0cd13e..9ea9c05093cd 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -48,6 +48,9 @@ #include +#include +#include + #include "core.h" #include "clock.h" diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 268d7701fa9b..794a8d91a6a6 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -62,111 +62,6 @@ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ #endif -#define IRQ_EB_GIC_START 32 - -/* - * RealView EB interrupt sources - */ -#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ -#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ -#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ -#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ -#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ -#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ -#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ -#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ -#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ -#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ -#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ -#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ -#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ -#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ -#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ -#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ - -/* - * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) - */ -#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) -#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) -#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) -#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) -#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) -#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) -#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) -#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) -#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) -#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) -#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ -#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ -#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ -#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ -#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) -#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) - -#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) -#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) -#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) -#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) -#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) -#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) -#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) -#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) -#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) -#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) -#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) -#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) - -#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) -#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) -#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) - -#define IRQ_EB11MP_UART2 -1 -#define IRQ_EB11MP_UART3 -1 -#define IRQ_EB11MP_CLCD -1 -#define IRQ_EB11MP_DMA -1 -#define IRQ_EB11MP_WDOG -1 -#define IRQ_EB11MP_GPIO0 -1 -#define IRQ_EB11MP_GPIO1 -1 -#define IRQ_EB11MP_GPIO2 -1 -#define IRQ_EB11MP_SCI -1 -#define IRQ_EB11MP_SSP -1 - -#define NR_GIC_EB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_EB - */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_EB) \ - && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_EB -#endif - -#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ - && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_EB11MP -#endif - /* * Core tile identification (REALVIEW_SYS_PROCID) */ diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index e4d0e8046ea5..98f8e7eeacc2 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -73,82 +73,4 @@ #define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ -/* - * Irqs - */ -#define IRQ_DC1176_GIC_START 32 -#define IRQ_PB1176_GIC_START 64 - -/* - * ARM1176 DevChip interrupt sources (primary GIC) - */ -#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ -#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ -#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ -#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ -#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ -#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) -#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) -#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) -#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) -#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ -#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ -#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ -#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ -#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ - -#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ -#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ - -/* - * RealView PB1176 interrupt sources (secondary GIC) - */ -#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ -#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ -#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ -#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ -#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) -#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ -#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ -#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) -#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) -#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ -#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ - -#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) - -#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ - -#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) -#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) -#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ -#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ - -#define IRQ_PB1176_GPIO0 -1 -#define IRQ_PB1176_SSP -1 -#define IRQ_PB1176_SCTL -1 - -#define NR_GIC_PB1176 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB1176 - */ -#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB1176) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB1176 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB1176 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB1176 */ - #endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index 53ea0e7a1267..f0d68e0fea01 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -81,105 +81,4 @@ #define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ #define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ -/* - * Irqs - */ -#define IRQ_TC11MP_GIC_START 32 -#define IRQ_PB11MP_GIC_START 64 - -/* - * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) - */ -#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) -#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) -#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) -#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) -#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) -#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) -#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) -#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) -#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) -#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) -#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ -#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ -#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ -#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ -#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) -#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) - -#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) -#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) -#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) -#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) -#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) -#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) -#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) -#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) -#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) -#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) -#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) -#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) - -#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) -#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) -#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) - -/* - * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) - */ -#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ -#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ -#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ -#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ -#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ -#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ -#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ -#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ -#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PB11MP_SMC -1 -#define IRQ_PB11MP_SCTL -1 - -#define NR_GIC_PB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB11MP - */ -#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB11MP) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB11MP -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB11MP -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB11MP */ - #endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h index 307f97b16e5b..4dfc67a4f45f 100644 --- a/arch/arm/mach-realview/include/mach/board-pba8.h +++ b/arch/arm/mach-realview/include/mach/board-pba8.h @@ -70,81 +70,4 @@ #define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ #define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ -/* - * Irqs - */ -#define IRQ_PBA8_GIC_START 32 - -/* L220 -#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) -#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) -#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) -*/ - -/* - * PB-A8 on-board gic irq sources - */ -#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ -#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ -#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ -#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ -#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ -#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ -#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ -#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ -#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ -#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ -#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ - -/* ... */ -#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) -#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) -#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) -#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) - -#define IRQ_PBA8_SMC -1 -#define IRQ_PBA8_SCTL -1 - -#define NR_GIC_PBA8 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBA8 - */ -#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) - -#if defined(CONFIG_MACH_REALVIEW_PBA8) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBA8 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBA8 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBA8 */ - #endif /* __ASM_ARCH_BOARD_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h index c26509388828..848bfff6d8f1 100644 --- a/arch/arm/mach-realview/include/mach/board-pbx.h +++ b/arch/arm/mach-realview/include/mach/board-pbx.h @@ -80,101 +80,6 @@ #define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */ #define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */ -/* - * Irqs - */ -#define IRQ_PBX_GIC_START 32 - -/* L220 -#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29) -#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30) -#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31) -*/ - -/* - * PB-X on-board gic irq sources - */ -#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */ -#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */ -#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */ -#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */ -#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */ -#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */ -#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */ -#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */ -#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */ -#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */ -#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */ -#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33) -#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34) -#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35) -#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36) -#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37) -#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38) -#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39) - -#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */ -#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ -#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ -/* ... */ -#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ -#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45) -#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46) -#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47) - -/* ... */ -#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) -#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51) -#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52) -#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53) - -#define IRQ_PBX_SMC -1 -#define IRQ_PBX_SCTL -1 - -#define NR_GIC_PBX 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBX - */ -#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PBX) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBX -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBX -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBX */ - /* * Core tile identification (REALVIEW_SYS_PROCID) */ diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h new file mode 100644 index 000000000000..204d5378f309 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-eb.h @@ -0,0 +1,129 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-eb.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_EB_H +#define __MACH_IRQS_EB_H + +#define IRQ_EB_GIC_START 32 + +/* + * RealView EB interrupt sources + */ +#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ +#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ +#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ +#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ +#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ +#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ +#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ +#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ +#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ +#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ +#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ +#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ +#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ +#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ +#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ +#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ + +/* + * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) + */ +#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) +#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) +#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) +#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) +#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) +#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) +#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) +#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) +#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) +#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) +#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ +#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ +#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ +#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ +#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) +#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) + +#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) +#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) +#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) +#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) +#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) +#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) +#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) +#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) +#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) +#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) +#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) +#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) + +#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) +#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) +#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) + +#define IRQ_EB11MP_UART2 -1 +#define IRQ_EB11MP_UART3 -1 +#define IRQ_EB11MP_CLCD -1 +#define IRQ_EB11MP_DMA -1 +#define IRQ_EB11MP_WDOG -1 +#define IRQ_EB11MP_GPIO0 -1 +#define IRQ_EB11MP_GPIO1 -1 +#define IRQ_EB11MP_GPIO2 -1 +#define IRQ_EB11MP_SCI -1 +#define IRQ_EB11MP_SSP -1 + +#define NR_GIC_EB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_EB + */ +#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_EB) \ + && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_EB +#endif + +#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ + && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_EB11MP +#endif + +#endif /* __MACH_IRQS_EB_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h new file mode 100644 index 000000000000..2410d4f8ddd3 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -0,0 +1,99 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pb1176.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PB1176_H +#define __MACH_IRQS_PB1176_H + +#define IRQ_DC1176_GIC_START 32 +#define IRQ_PB1176_GIC_START 64 + +/* + * ARM1176 DevChip interrupt sources (primary GIC) + */ +#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ +#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ +#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ +#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ +#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ +#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) +#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) +#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) +#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) +#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ +#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ +#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ +#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ + +#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ +#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ + +/* + * RealView PB1176 interrupt sources (secondary GIC) + */ +#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ +#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ +#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ +#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ +#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) +#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ +#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ +#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) +#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) +#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ +#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ + +#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) + +#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ + +#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) +#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) +#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ +#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ + +#define IRQ_PB1176_GPIO0 -1 +#define IRQ_PB1176_SSP -1 +#define IRQ_PB1176_SCTL -1 + +#define NR_GIC_PB1176 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB1176 + */ +#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB1176) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB1176 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB1176 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB1176 */ + +#endif /* __MACH_IRQS_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h new file mode 100644 index 000000000000..34e255add21e --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h @@ -0,0 +1,122 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pb11mp.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PB11MP_H +#define __MACH_IRQS_PB11MP_H + +#define IRQ_TC11MP_GIC_START 32 +#define IRQ_PB11MP_GIC_START 64 + +/* + * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) + */ +#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) +#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) +#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) +#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) +#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) +#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) +#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) +#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) +#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) +#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) +#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ +#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ +#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ +#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ +#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) +#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) + +#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) +#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) +#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) +#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) +#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) +#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) +#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) +#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) +#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) +#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) +#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) +#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) + +#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) +#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) + +/* + * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) + */ +#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ +#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ +#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ +#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ +#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ +#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ +#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ +#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ +#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PB11MP_SMC -1 +#define IRQ_PB11MP_SCTL -1 + +#define NR_GIC_PB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB11MP + */ +#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB11MP) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB11MP +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB11MP +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB11MP */ + +#endif /* __MACH_IRQS_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h new file mode 100644 index 000000000000..86792a9f2ab6 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h @@ -0,0 +1,98 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pba8.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PBA8_H +#define __MACH_IRQS_PBA8_H + +#define IRQ_PBA8_GIC_START 32 + +/* L220 +#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) +#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) +#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) +*/ + +/* + * PB-A8 on-board gic irq sources + */ +#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ +#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ +#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ +#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ +#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ + +/* ... */ +#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) +#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) +#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) +#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) + +#define IRQ_PBA8_SMC -1 +#define IRQ_PBA8_SCTL -1 + +#define NR_GIC_PBA8 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBA8 + */ +#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) + +#if defined(CONFIG_MACH_REALVIEW_PBA8) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBA8 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBA8 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBA8 */ + +#endif /* __MACH_IRQS_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h new file mode 100644 index 000000000000..deaad4302b17 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pbx.h + * + * Copyright (C) 2009 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __MACH_IRQS_PBX_H +#define __MACH_IRQS_PBX_H + +#define IRQ_PBX_GIC_START 32 + +/* L220 +#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29) +#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30) +#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31) +*/ + +/* + * PBX on-board gic irq sources + */ +#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */ +#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */ +#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */ +#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */ +#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */ +#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33) +#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34) +#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35) +#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36) +#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37) +#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38) +#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39) + +#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */ +#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ +#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ +/* ... */ +#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ +#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45) +#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46) +#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47) + +/* ... */ +#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) +#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51) +#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52) +#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53) + +#define IRQ_PBX_SMC -1 +#define IRQ_PBX_SCTL -1 + +#define NR_GIC_PBX 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBX + */ +#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PBX) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBX +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBX +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBX */ + +#endif /* __MACH_IRQS_PBX_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h index e9e38264671e..78854f2fa323 100644 --- a/arch/arm/mach-realview/include/mach/irqs.h +++ b/arch/arm/mach-realview/include/mach/irqs.h @@ -22,11 +22,11 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c index 853d42bb8682..4ce0f9801e2e 100644 --- a/arch/arm/oprofile/op_model_mpcore.c +++ b/arch/arm/oprofile/op_model_mpcore.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include "op_counter.h" -- 2.39.2