From 9b289c7b9a8c9200798c4d181d59c87341958cf3 Mon Sep 17 00:00:00 2001 From: Roland Vossen Date: Tue, 3 May 2011 11:35:06 +0200 Subject: [PATCH] staging: brcm80211: replaced WL_ERROR in two files. Code cleanup. Use Linux functions instead of Broadcom specific one. On spots where the wiphy object is not yet available, pr_err() is used instead. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley Cc: Henry Ptasinski Cc: Roland Vossen Signed-off-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- .../staging/brcm80211/brcmsmac/wl_mac80211.c | 214 ++++++++++-------- .../staging/brcm80211/brcmsmac/wlc_antsel.c | 7 +- 2 files changed, 121 insertions(+), 100 deletions(-) diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c index f2e481f03c64..7e9ed523b48b 100644 --- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c +++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c @@ -156,7 +156,7 @@ static void wl_ops_tx(struct ieee80211_hw *hw, struct sk_buff *skb) WL_LOCK(wl); if (!wl->pub->up) { - WL_ERROR("ops->tx called while down\n"); + wiphy_err(wl->wiphy, "ops->tx called while down\n"); kfree_skb(skb); goto done; } @@ -204,8 +204,8 @@ wl_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) vif->type != NL80211_IFTYPE_STATION && vif->type != NL80211_IFTYPE_WDS && vif->type != NL80211_IFTYPE_ADHOC) { - WL_ERROR("%s: Attempt to add type %d, only STA for now\n", - __func__, vif->type); + wiphy_err(hw->wiphy, "%s: Attempt to add type %d, only" + " STA for now\n", __func__, vif->type); return -EOPNOTSUPP; } @@ -215,7 +215,8 @@ wl_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) WL_UNLOCK(wl); if (err != 0) { - WL_ERROR("%s: wl_up() returned %d\n", __func__, err); + wiphy_err(hw->wiphy, "%s: wl_up() returned %d\n", __func__, + err); } return err; } @@ -250,7 +251,8 @@ ieee_set_channel(struct ieee80211_hw *hw, struct ieee80211_channel *chan, break; case NL80211_CHAN_HT40MINUS: case NL80211_CHAN_HT40PLUS: - WL_ERROR("%s: Need to implement 40 Mhz Channels!\n", __func__); + wiphy_err(hw->wiphy, + "%s: Need to implement 40 Mhz Channels!\n", __func__); err = 1; break; } @@ -266,13 +268,14 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed) struct wl_info *wl = HW_TO_WL(hw); int err = 0; int new_int; + struct wiphy *wiphy = hw->wiphy; WL_LOCK(wl); if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { if (wlc_iovar_setint (wl->wlc, "bcn_li_bcn", conf->listen_interval)) { - WL_ERROR("%s: Error setting listen_interval\n", - __func__); + wiphy_err(wiphy, "%s: Error setting listen_interval\n", + __func__); err = -EIO; goto config_out; } @@ -280,25 +283,27 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed) ASSERT(new_int == conf->listen_interval); } if (changed & IEEE80211_CONF_CHANGE_MONITOR) - WL_ERROR("%s: change monitor mode: %s (implement)\n", __func__, - conf->flags & IEEE80211_CONF_MONITOR ? - "true" : "false"); + wiphy_err(wiphy, "%s: change monitor mode: %s (implement)\n", + __func__, conf->flags & IEEE80211_CONF_MONITOR ? + "true" : "false"); if (changed & IEEE80211_CONF_CHANGE_PS) - WL_ERROR("%s: change power-save mode: %s (implement)\n", - __func__, conf->flags & IEEE80211_CONF_PS ? - "true" : "false"); + wiphy_err(wiphy, "%s: change power-save mode: %s (implement)\n", + __func__, conf->flags & IEEE80211_CONF_PS ? + "true" : "false"); if (changed & IEEE80211_CONF_CHANGE_POWER) { if (wlc_iovar_setint (wl->wlc, "qtxpower", conf->power_level * 4)) { - WL_ERROR("%s: Error setting power_level\n", __func__); + wiphy_err(wiphy, "%s: Error setting power_level\n", + __func__); err = -EIO; goto config_out; } wlc_iovar_getint(wl->wlc, "qtxpower", &new_int); if (new_int != (conf->power_level * 4)) - WL_ERROR("%s: Power level req != actual, %d %d\n", - __func__, conf->power_level * 4, new_int); + wiphy_err(wiphy, "%s: Power level req != actual, %d %d" + "\n", __func__, conf->power_level * 4, + new_int); } if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { err = ieee_set_channel(hw, conf->channel, conf->channel_type); @@ -307,13 +312,13 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed) if (wlc_set (wl->wlc, WLC_SET_SRL, conf->short_frame_max_tx_count) < 0) { - WL_ERROR("%s: Error setting srl\n", __func__); + wiphy_err(wiphy, "%s: Error setting srl\n", __func__); err = -EIO; goto config_out; } if (wlc_set(wl->wlc, WLC_SET_LRL, conf->long_frame_max_tx_count) < 0) { - WL_ERROR("%s: Error setting lrl\n", __func__); + wiphy_err(wiphy, "%s: Error setting lrl\n", __func__); err = -EIO; goto config_out; } @@ -330,25 +335,27 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_bss_conf *info, u32 changed) { struct wl_info *wl = HW_TO_WL(hw); + struct wiphy *wiphy = hw->wiphy; int val; if (changed & BSS_CHANGED_ASSOC) { /* association status changed (associated/disassociated) * also implies a change in the AID. */ - WL_ERROR("%s: %s: %sassociated\n", KBUILD_MODNAME, __func__, - info->assoc ? "" : "dis"); + wiphy_err(wiphy, "%s: %s: %sassociated\n", KBUILD_MODNAME, + __func__, info->assoc ? "" : "dis"); wlc_associate_upd(wl->wlc, info->assoc); } if (changed & BSS_CHANGED_ERP_CTS_PROT) { /* CTS protection changed */ - WL_ERROR("%s: use_cts_prot: %s (implement)\n", __func__, - info->use_cts_prot ? "true" : "false"); + wiphy_err(wiphy, "%s: use_cts_prot: %s (implement)\n", __func__, + info->use_cts_prot ? "true" : "false"); } if (changed & BSS_CHANGED_ERP_PREAMBLE) { /* preamble changed */ - WL_ERROR("%s: short preamble: %s (implement)\n", __func__, - info->use_short_preamble ? "true" : "false"); + wiphy_err(wiphy, "%s: short preamble: %s (implement)\n", + __func__, info->use_short_preamble ? "true" : + "false"); } if (changed & BSS_CHANGED_ERP_SLOT) { /* slot timing changed */ @@ -373,8 +380,8 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_BASIC_RATES) { /* Basic rateset changed */ - WL_ERROR("%s: Need to change Basic Rates: 0x%x (implement)\n", - __func__, (u32) info->basic_rates); + wiphy_err(wiphy, "%s: Need to change Basic Rates: 0x%x" + " (implement)\n", __func__, (u32) info->basic_rates); } if (changed & BSS_CHANGED_BEACON_INT) { /* Beacon interval changed */ @@ -389,41 +396,42 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_BEACON) { /* Beacon data changed, retrieve new beacon (beaconing modes) */ - WL_ERROR("%s: beacon changed\n", __func__); + wiphy_err(wiphy, "%s: beacon changed\n", __func__); } if (changed & BSS_CHANGED_BEACON_ENABLED) { /* Beaconing should be enabled/disabled (beaconing modes) */ - WL_ERROR("%s: Beacon enabled: %s\n", __func__, - info->enable_beacon ? "true" : "false"); + wiphy_err(wiphy, "%s: Beacon enabled: %s\n", __func__, + info->enable_beacon ? "true" : "false"); } if (changed & BSS_CHANGED_CQM) { /* Connection quality monitor config changed */ - WL_ERROR("%s: cqm change: threshold %d, hys %d (implement)\n", - __func__, info->cqm_rssi_thold, info->cqm_rssi_hyst); + wiphy_err(wiphy, "%s: cqm change: threshold %d, hys %d " + " (implement)\n", __func__, info->cqm_rssi_thold, + info->cqm_rssi_hyst); } if (changed & BSS_CHANGED_IBSS) { /* IBSS join status changed */ - WL_ERROR("%s: IBSS joined: %s (implement)\n", __func__, - info->ibss_joined ? "true" : "false"); + wiphy_err(wiphy, "%s: IBSS joined: %s (implement)\n", __func__, + info->ibss_joined ? "true" : "false"); } if (changed & BSS_CHANGED_ARP_FILTER) { /* Hardware ARP filter address list or state changed */ - WL_ERROR("%s: arp filtering: enabled %s, count %d (implement)\n", - __func__, info->arp_filter_enabled ? "true" : "false", - info->arp_addr_cnt); + wiphy_err(wiphy, "%s: arp filtering: enabled %s, count %d" + " (implement)\n", __func__, info->arp_filter_enabled ? + "true" : "false", info->arp_addr_cnt); } if (changed & BSS_CHANGED_QOS) { /* * QoS for this association was enabled/disabled. * Note that it is only ever disabled for station mode. */ - WL_ERROR("%s: qos enabled: %s (implement)\n", __func__, - info->qos ? "true" : "false"); + wiphy_err(wiphy, "%s: qos enabled: %s (implement)\n", __func__, + info->qos ? "true" : "false"); } if (changed & BSS_CHANGED_IDLE) { /* Idle changed for this BSS/interface */ - WL_ERROR("%s: BSS idle: %s (implement)\n", __func__, - info->idle ? "true" : "false"); + wiphy_err(wiphy, "%s: BSS idle: %s (implement)\n", __func__, + info->idle ? "true" : "false"); } return; } @@ -434,21 +442,22 @@ wl_ops_configure_filter(struct ieee80211_hw *hw, unsigned int *total_flags, u64 multicast) { struct wl_info *wl = hw->priv; + struct wiphy *wiphy = hw->wiphy; changed_flags &= MAC_FILTERS; *total_flags &= MAC_FILTERS; if (changed_flags & FIF_PROMISC_IN_BSS) - WL_ERROR("FIF_PROMISC_IN_BSS\n"); + wiphy_err(wiphy, "FIF_PROMISC_IN_BSS\n"); if (changed_flags & FIF_ALLMULTI) - WL_ERROR("FIF_ALLMULTI\n"); + wiphy_err(wiphy, "FIF_ALLMULTI\n"); if (changed_flags & FIF_FCSFAIL) - WL_ERROR("FIF_FCSFAIL\n"); + wiphy_err(wiphy, "FIF_FCSFAIL\n"); if (changed_flags & FIF_PLCPFAIL) - WL_ERROR("FIF_PLCPFAIL\n"); + wiphy_err(wiphy, "FIF_PLCPFAIL\n"); if (changed_flags & FIF_CONTROL) - WL_ERROR("FIF_CONTROL\n"); + wiphy_err(wiphy, "FIF_CONTROL\n"); if (changed_flags & FIF_OTHER_BSS) - WL_ERROR("FIF_OTHER_BSS\n"); + wiphy_err(wiphy, "FIF_OTHER_BSS\n"); if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { WL_LOCK(wl); if (*total_flags & FIF_BCN_PRBRESP_PROMISC) { @@ -489,7 +498,7 @@ static void wl_ops_sw_scan_complete(struct ieee80211_hw *hw) static void wl_ops_set_tsf(struct ieee80211_hw *hw, u64 tsf) { - WL_ERROR("%s: Enter\n", __func__); + wiphy_err(hw->wiphy, "%s: Enter\n", __func__); return; } @@ -526,7 +535,8 @@ wl_ops_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, { switch (cmd) { default: - WL_ERROR("%s: Unknown cmd = %d\n", __func__, cmd); + wiphy_err(hw->wiphy, "%s: Unknown cmd = %d\n", __func__, + cmd); break; } return; @@ -547,7 +557,7 @@ wl_ops_conf_tx(struct ieee80211_hw *hw, u16 queue, static u64 wl_ops_get_tsf(struct ieee80211_hw *hw) { - WL_ERROR("%s: Enter\n", __func__); + wiphy_err(hw->wiphy, "%s: Enter\n", __func__); return 0; } @@ -617,7 +627,8 @@ wl_ops_ampdu_action(struct ieee80211_hw *hw, status = wlc_aggregatable(wl->wlc, tid); WL_UNLOCK(wl); if (!status) { - /* WL_ERROR("START: tid %d is not agg' able, return FAILURE to stack\n", tid); */ + wiphy_err(wl->wiphy, "START: tid %d is not agg\'able\n", + tid); return -1; } /* XXX: Use the starting sequence number provided ... */ @@ -636,7 +647,8 @@ wl_ops_ampdu_action(struct ieee80211_hw *hw, /* Power save wakeup */ break; default: - WL_ERROR("%s: Invalid command, ignoring\n", __func__); + wiphy_err(wl->wiphy, "%s: Invalid command, ignoring\n", + __func__); } return 0; @@ -714,7 +726,6 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, err = 0; if (unit < 0) { - WL_ERROR("wl%d: unit number overflow, exiting\n", unit); return NULL; } @@ -745,7 +756,7 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, wl->regsva = ioremap_nocache(base_addr, PCI_BAR0_WINSZ); if (wl->regsva == NULL) { - WL_ERROR("wl%d: ioremap() failed\n", unit); + wiphy_err(wl->wiphy, "wl%d: ioremap() failed\n", unit); goto fail; } spin_lock_init(&wl->lock); @@ -753,8 +764,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, /* prepare ucode */ if (wl_request_fw(wl, (struct pci_dev *)btparam) < 0) { - WL_ERROR("%s: Failed to find firmware usually in %s\n", - KBUILD_MODNAME, "/lib/firmware/brcm"); + wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in " + "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm"); wl_release_fw(wl); wl_remove((struct pci_dev *)btparam); goto fail1; @@ -765,8 +776,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, wl->regsva, wl->bcm_bustype, btparam, &err); wl_release_fw(wl); if (!wl->wlc) { - WL_ERROR("%s: wlc_attach() failed with code %d\n", - KBUILD_MODNAME, err); + wiphy_err(wl->wiphy, "%s: wlc_attach() failed with code %d\n", + KBUILD_MODNAME, err); goto fail; } wl->pub = wlc_pub(wl->wlc); @@ -777,12 +788,13 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, if (wlc_iovar_setint(wl->wlc, "mpc", 0)) { - WL_ERROR("wl%d: Error setting MPC variable to 0\n", unit); + wiphy_err(wl->wiphy, "wl%d: Error setting MPC variable to 0\n", + unit); } /* register our interrupt handler */ if (request_irq(irq, wl_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) { - WL_ERROR("wl%d: request_irq() failed\n", unit); + wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit); goto fail; } wl->irq = irq; @@ -792,7 +804,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, NULL); if (ieee_hw_init(hw)) { - WL_ERROR("wl%d: %s: ieee_hw_init failed!\n", unit, __func__); + wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit, + __func__); goto fail; } @@ -802,8 +815,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, err = ieee80211_register_hw(hw); if (err) { - WL_ERROR("%s: ieee80211_register_hw failed, status %d\n", - __func__, err); + wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status" + "%d\n", __func__, err); } if (wl->pub->srom_ccode[0]) @@ -811,8 +824,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, else err = wl_set_hint(wl, "US"); if (err) { - WL_ERROR("%s: regulatory_hint failed, status %d\n", - __func__, err); + wiphy_err(wl->wiphy, "%s: regulatory_hint failed, status %d\n", + __func__, err); } wl_found++; @@ -1007,7 +1020,7 @@ static int ieee_hw_rate_init(struct ieee80211_hw *hw) hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL; if (wlc_get(wl->wlc, WLC_GET_PHYLIST, (int *)&phy_list) < 0) { - WL_ERROR("Phy list failed\n"); + wiphy_err(hw->wiphy, "Phy list failed\n"); } if (phy_list[0] == 'n' || phy_list[0] == 'c') { @@ -1093,9 +1106,9 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) rc = pci_enable_device(pdev); if (rc) { - WL_ERROR("%s: Cannot enable device %d-%d_%d\n", - __func__, pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn)); + pr_err("%s: Cannot enable device %d-%d_%d\n", + __func__, pdev->bus->number, PCI_SLOT(pdev->devfn), + PCI_FUNC(pdev->devfn)); return -ENODEV; } pci_set_master(pdev); @@ -1106,7 +1119,7 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) hw = ieee80211_alloc_hw(sizeof(struct wl_info), &wl_ops); if (!hw) { - WL_ERROR("%s: ieee80211_alloc_hw failed\n", __func__); + pr_err("%s: ieee80211_alloc_hw failed\n", __func__); rc = -ENOMEM; goto err_1; } @@ -1121,13 +1134,13 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) PCI_BUS, pdev, pdev->irq); if (!wl) { - WL_ERROR("%s: %s: wl_attach failed!\n", - KBUILD_MODNAME, __func__); + pr_err("%s: %s: wl_attach failed!\n", KBUILD_MODNAME, + __func__); return -ENODEV; } return 0; err_1: - WL_ERROR("%s: err_1: Major hoarkage\n", __func__); + pr_err("%s: err_1: Major hoarkage\n", __func__); return 0; } @@ -1141,7 +1154,8 @@ static int wl_suspend(struct pci_dev *pdev, pm_message_t state) hw = pci_get_drvdata(pdev); wl = HW_TO_WL(hw); if (!wl) { - WL_ERROR("wl: wl_suspend: pci_get_drvdata failed\n"); + wiphy_err(wl->wiphy, + "wl_suspend: pci_get_drvdata failed\n"); return -ENODEV; } @@ -1166,7 +1180,8 @@ static int wl_resume(struct pci_dev *pdev) hw = pci_get_drvdata(pdev); wl = HW_TO_WL(hw); if (!wl) { - WL_ERROR("wl: wl_resume: pci_get_drvdata failed\n"); + wiphy_err(wl->wiphy, + "wl: wl_resume: pci_get_drvdata failed\n"); return -ENODEV; } @@ -1206,7 +1221,7 @@ static void wl_remove(struct pci_dev *pdev) hw = pci_get_drvdata(pdev); wl = HW_TO_WL(hw); if (!wl) { - WL_ERROR("wl: wl_remove: pci_get_drvdata failed\n"); + pr_err("wl: wl_remove: pci_get_drvdata failed\n"); return; } @@ -1214,7 +1229,7 @@ static void wl_remove(struct pci_dev *pdev) status = wlc_chipmatch(pdev->vendor, pdev->device); WL_UNLOCK(wl); if (!status) { - WL_ERROR("wl: wl_remove: wlc_chipmatch failed\n"); + wiphy_err(wl->wiphy, "wl: wl_remove: wlc_chipmatch failed\n"); return; } if (wl->wlc) { @@ -1369,7 +1384,7 @@ static void wl_free(struct wl_info *wl) void wl_txflowcontrol(struct wl_info *wl, struct wl_if *wlif, bool state, int prio) { - WL_ERROR("Shouldn't be here %s\n", __func__); + wiphy_err(wl->wiphy, "Shouldn't be here %s\n", __func__); } /* @@ -1587,7 +1602,8 @@ struct wl_timer *wl_init_timer(struct wl_info *wl, void (*fn) (void *arg), t = kzalloc(sizeof(struct wl_timer), GFP_ATOMIC); if (!t) { - WL_ERROR("wl%d: wl_init_timer: out of memory\n", wl->pub->unit); + wiphy_err(wl->wiphy, "wl%d: wl_init_timer: out of memory\n", + wl->pub->unit); return 0; } @@ -1618,8 +1634,8 @@ void wl_add_timer(struct wl_info *wl, struct wl_timer *t, uint ms, int periodic) { #ifdef BCMDBG if (t->set) { - WL_ERROR("%s: Already set. Name: %s, per %d\n", - __func__, t->name, periodic); + wiphy_err(wl->wiphy, "%s: Already set. Name: %s, per %d\n", + __func__, t->name, periodic); } #endif ASSERT(!t->set); @@ -1754,8 +1770,8 @@ int wl_ucode_init_buf(struct wl_info *wl, void **pbuf, u32 idx) pdata = wl->fw.fw_bin[i]->data + hdr->offset; *pbuf = kmalloc(hdr->len, GFP_ATOMIC); if (*pbuf == NULL) { - WL_ERROR("fail to alloc %d bytes\n", - hdr->len); + wiphy_err(wl->wiphy, "fail to alloc %d" + " bytes\n", hdr->len); goto fail; } memcpy(*pbuf, pdata, hdr->len); @@ -1763,7 +1779,8 @@ int wl_ucode_init_buf(struct wl_info *wl, void **pbuf, u32 idx) } } } - WL_ERROR("ERROR: ucode buf tag:%d can not be found!\n", idx); + wiphy_err(wl->wiphy, "ERROR: ucode buf tag:%d can not be found!\n", + idx); *pbuf = NULL; fail: return -BCME_NOTFOUND; @@ -1790,7 +1807,7 @@ int wl_ucode_init_uint(struct wl_info *wl, u32 *data, u32 idx) } } } - WL_ERROR("ERROR: ucode tag:%d can not be found!\n", idx); + wiphy_err(wl->wiphy, "ERROR: ucode tag:%d can not be found!\n", idx); return -1; } @@ -1813,16 +1830,16 @@ static int wl_request_fw(struct wl_info *wl, struct pci_dev *pdev) UCODE_LOADER_API_VER); status = request_firmware(&wl->fw.fw_bin[i], fw_name, device); if (status) { - WL_ERROR("%s: fail to load firmware %s\n", - KBUILD_MODNAME, fw_name); + wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", + KBUILD_MODNAME, fw_name); return status; } sprintf(fw_name, "%s_hdr-%d.fw", wl_firmwares[i], UCODE_LOADER_API_VER); status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device); if (status) { - WL_ERROR("%s: fail to load firmware %s\n", - KBUILD_MODNAME, fw_name); + wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", + KBUILD_MODNAME, fw_name); return status; } wl->fw.hdr_num_entries[i] = @@ -1874,16 +1891,17 @@ int wl_check_firmwares(struct wl_info *wl) if (fw == NULL && fw_hdr == NULL) { break; } else if (fw == NULL || fw_hdr == NULL) { - WL_ERROR("%s: invalid bin/hdr fw\n", __func__); + wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n", + __func__); rc = -EBADF; } else if (fw_hdr->size % sizeof(struct wl_fw_hdr)) { - WL_ERROR("%s: non integral fw hdr file size %zu/%zu\n", - __func__, fw_hdr->size, - sizeof(struct wl_fw_hdr)); + wiphy_err(wl->wiphy, "%s: non integral fw hdr file " + "size %zu/%zu\n", __func__, fw_hdr->size, + sizeof(struct wl_fw_hdr)); rc = -EBADF; } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) { - WL_ERROR("%s: out of bounds fw file size %zu\n", - __func__, fw->size); + wiphy_err(wl->wiphy, "%s: out of bounds fw file size " + "%zu\n", __func__, fw->size); rc = -EBADF; } else { /* check if ucode section overruns firmware image */ @@ -1892,15 +1910,17 @@ int wl_check_firmwares(struct wl_info *wl) !rc; entry++, ucode_hdr++) { if (ucode_hdr->offset + ucode_hdr->len > fw->size) { - WL_ERROR("%s: conflicting bin/hdr\n", - __func__); + wiphy_err(wl->wiphy, + "%s: conflicting bin/hdr\n", + __func__); rc = -EBADF; } } } } if (rc == 0 && wl->fw.fw_cnt != i) { - WL_ERROR("%s: invalid fw_cnt=%d\n", __func__, wl->fw.fw_cnt); + wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__, + wl->fw.fw_cnt); rc = -EBADF; } return rc; diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c index 85a73a978d4f..0121ce3ec493 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c @@ -98,8 +98,8 @@ struct antsel_info *wlc_antsel_attach(struct wlc_info *wlc) asi = kzalloc(sizeof(struct antsel_info), GFP_ATOMIC); if (!asi) { - WL_ERROR("wl%d: wlc_antsel_attach: out of mem\n", - wlc->pub->unit); + wiphy_err(wlc->wiphy, "wl%d: wlc_antsel_attach: out of mem\n", + wlc->pub->unit); return NULL; } @@ -128,7 +128,8 @@ struct antsel_info *wlc_antsel_attach(struct wlc_info *wlc) asi->antsel_avail = false; } else { asi->antsel_avail = false; - WL_ERROR("wlc_antsel_attach: 2o3 board cfg invalid\n"); + wiphy_err(wlc->wiphy, "wlc_antsel_attach: 2o3 " + "board cfg invalid\n"); ASSERT(0); } break; -- 2.39.2