From 4729d77332a4383770c780b7709d5e14f12a4d1e Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Wed, 8 Oct 2014 15:52:49 +0200 Subject: [PATCH] CRISv32: Implement early console Signed-off-by: Jesper Nilsson --- arch/cris/arch-v32/kernel/debugport.c | 82 ++++++++++++++++++--------- 1 file changed, 56 insertions(+), 26 deletions(-) diff --git a/arch/cris/arch-v32/kernel/debugport.c b/arch/cris/arch-v32/kernel/debugport.c index 610909b003f6..02e33ebe51ec 100644 --- a/arch/cris/arch-v32/kernel/debugport.c +++ b/arch/cris/arch-v32/kernel/debugport.c @@ -3,7 +3,9 @@ */ #include +#include #include +#include #include #include #include @@ -65,6 +67,7 @@ struct dbg_port ports[] = }, #endif }; + static struct dbg_port *port = #if defined(CONFIG_ETRAX_DEBUG_PORT0) &ports[0]; @@ -97,14 +100,19 @@ static struct dbg_port *kgdb_port = #endif #endif -static void -start_port(struct dbg_port* p) +static void start_port(struct dbg_port *p) { - if (!p) - return; + /* Set up serial port registers */ + reg_ser_rw_tr_ctrl tr_ctrl = {0}; + reg_ser_rw_tr_dma_en tr_dma_en = {0}; - if (p->started) + reg_ser_rw_rec_ctrl rec_ctrl = {0}; + reg_ser_rw_tr_baud_div tr_baud_div = {0}; + reg_ser_rw_rec_baud_div rec_baud_div = {0}; + + if (!p || p->started) return; + p->started = 1; if (p->nbr == 1) @@ -118,36 +126,24 @@ start_port(struct dbg_port* p) crisv32_pinmux_alloc_fixed(pinmux_ser4); #endif - /* Set up serial port registers */ - reg_ser_rw_tr_ctrl tr_ctrl = {0}; - reg_ser_rw_tr_dma_en tr_dma_en = {0}; - - reg_ser_rw_rec_ctrl rec_ctrl = {0}; - reg_ser_rw_tr_baud_div tr_baud_div = {0}; - reg_ser_rw_rec_baud_div rec_baud_div = {0}; - tr_ctrl.base_freq = rec_ctrl.base_freq = regk_ser_f29_493; tr_dma_en.en = rec_ctrl.dma_mode = regk_ser_no; tr_baud_div.div = rec_baud_div.div = 29493000 / p->baudrate / 8; tr_ctrl.en = rec_ctrl.en = 1; - if (p->parity == 'O') - { + if (p->parity == 'O') { tr_ctrl.par_en = regk_ser_yes; tr_ctrl.par = regk_ser_odd; rec_ctrl.par_en = regk_ser_yes; rec_ctrl.par = regk_ser_odd; - } - else if (p->parity == 'E') - { + } else if (p->parity == 'E') { tr_ctrl.par_en = regk_ser_yes; tr_ctrl.par = regk_ser_even; rec_ctrl.par_en = regk_ser_yes; rec_ctrl.par = regk_ser_odd; } - if (p->bits == 7) - { + if (p->bits == 7) { tr_ctrl.data_bits = regk_ser_bits7; rec_ctrl.data_bits = regk_ser_bits7; } @@ -161,8 +157,7 @@ start_port(struct dbg_port* p) #ifdef CONFIG_ETRAX_KGDB /* Use polling to get a single character from the kernel debug port */ -int -getDebugChar(void) +int getDebugChar(void) { reg_ser_rs_stat_din stat; reg_ser_rw_ack_intr ack_intr = { 0 }; @@ -179,8 +174,7 @@ getDebugChar(void) } /* Use polling to put a single character to the kernel debug port */ -void -putDebugChar(int val) +void putDebugChar(int val) { reg_ser_r_stat_din stat; do { @@ -190,12 +184,48 @@ putDebugChar(int val) } #endif /* CONFIG_ETRAX_KGDB */ +static void __init early_putch(int c) +{ + reg_ser_r_stat_din stat; + /* Wait until transmitter is ready and send. */ + do + stat = REG_RD(ser, port->instance, r_stat_din); + while (!stat.tr_rdy); + REG_WR_INT(ser, port->instance, rw_dout, c); +} + +static void __init +early_console_write(struct console *con, const char *s, unsigned n) +{ + extern void reset_watchdog(void); + int i; + + /* Send data. */ + for (i = 0; i < n; i++) { + /* TODO: the '\n' -> '\n\r' translation should be done at the + receiver. Remove it when the serial driver removes it. */ + if (s[i] == '\n') + early_putch('\r'); + early_putch(s[i]); + reset_watchdog(); + } +} + +static struct console early_console_dev __initdata = { + .name = "early", + .write = early_console_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + /* Register console for printk's, etc. */ -int __init -init_etrax_debug(void) +int __init init_etrax_debug(void) { start_port(port); + /* Register an early console if a debug port was chosen. */ + register_console(&early_console_dev); + #ifdef CONFIG_ETRAX_KGDB start_port(kgdb_port); #endif /* CONFIG_ETRAX_KGDB */ -- 2.39.2