From 4073f942698785397d8e51d3cefeebdc31a26b26 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 15 Apr 2014 07:31:21 -0300 Subject: [PATCH] [media] ARM: S5PV210: Remove camera support from mach-goni.c S5PV210 is going to get DT support, so we can remove the camera bits from the only board using camera on S5PV210. This allows to clean the exynos4-is driver by dropping code for non-dt platforms. This patch can be dropped if a patch removing the whole board file is applied first. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Acked-by: Kukjin Kim Signed-off-by: Mauro Carvalho Chehab --- arch/arm/mach-s5pv210/mach-goni.c | 51 ------------------------------- 1 file changed, 51 deletions(-) diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index b41a38a75844..6c719eccb94e 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -49,11 +49,6 @@ #include #include #include -#include - -#include -#include -#include #include "common.h" @@ -285,14 +280,6 @@ static void __init goni_tsp_init(void) /* USB OTG */ static struct s3c_hsotg_plat goni_hsotg_pdata; -static void goni_camera_init(void) -{ - s5pv210_fimc_setup_gpio(S5P_CAMPORT_A); - - /* Set max driver strength on CAM_A_CLKOUT pin. */ - s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4); -} - /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) @@ -825,34 +812,6 @@ static void goni_setup_sdhci(void) s3c_sdhci2_set_platdata(&goni_hsmmc2_data); }; -static struct noon010pc30_platform_data noon010pc30_pldata = { - .clk_rate = 16000000UL, - .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */ - .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */ -}; - -static struct i2c_board_info noon010pc30_board_info = { - I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1), - .platform_data = &noon010pc30_pldata, -}; - -static struct fimc_source_info goni_camera_sensors[] = { - { - .mux_id = 0, - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, - .board_info = &noon010pc30_board_info, - .i2c_bus_num = 0, - .clk_frequency = 16000000UL, - }, -}; - -static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { - .source_info = goni_camera_sensors, - .num_clients = ARRAY_SIZE(goni_camera_sensors), -}; - /* Audio device */ static struct platform_device goni_device_audio = { .name = "smdk-audio", @@ -874,10 +833,6 @@ static struct platform_device *goni_devices[] __initdata = { &s5p_device_mixer, &s5p_device_sdo, &s3c_device_i2c0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -946,14 +901,8 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); - /* FIMC */ - s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata), - &s5p_device_fimc_md); - s3c_hsotg_set_platdata(&goni_hsotg_pdata); - goni_camera_init(); - /* SPI */ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); -- 2.39.2