From 3a20446f02bfb71d68ae9ec673268bb7823f878c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 1 Aug 2013 17:09:23 -0400 Subject: [PATCH] USB: EHCI: keep better track of resuming ports The ehci-hcd driver isn't as careful as it should be about the way it uses ehci->resuming_ports. One of the omissions was fixed recently by commit 47a64a13d54 (USB: EHCI: Fix resume signalling on remote wakeup), but there are other places that need attention: When a port's suspend feature is explicitly cleared, the corresponding bit in resuming_ports should be set and the core should be notified about the port resume. We don't need to clear a resuming_ports bit when a reset completes. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 6dce37555c4f..6d0e59306ed9 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -801,6 +801,8 @@ static int ehci_hub_control ( ehci_writel(ehci, temp | PORT_RESUME, status_reg); ehci->reset_done[wIndex] = jiffies + msecs_to_jiffies(20); + set_bit(wIndex, &ehci->resuming_ports); + usb_hcd_start_port_resume(&hcd->self, wIndex); break; case USB_PORT_FEAT_C_SUSPEND: clear_bit(wIndex, &ehci->port_c_suspend); @@ -911,7 +913,6 @@ static int ehci_hub_control ( ehci->reset_done[wIndex])) { status |= USB_PORT_STAT_C_RESET << 16; ehci->reset_done [wIndex] = 0; - clear_bit(wIndex, &ehci->resuming_ports); /* force reset to complete */ ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET), -- 2.39.2