From 2709781be6141798162f1089df728fb218a590df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:41 +0100 Subject: [PATCH] I2C: S3C2410: Check ACK on byte transmission We should check for the reception of an ACK after transmitting each data byte. The address send has been correctly checking this, but the data write byte state should have also been checking for these failures. As part of the same fix, we remove the ACK checking from the receive path where it should not have been checking for an ACK which our hardware was sending. Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-s3c2410.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1305ef190fc1..7ad22c53564d 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -323,7 +323,17 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * end of the message, and if so, work out what to do */ + if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) { + if (iicstat & S3C2410_IICSTAT_LASTBIT) { + dev_dbg(i2c->dev, "WRITE: No Ack\n"); + + s3c24xx_i2c_stop(i2c, -ECONNREFUSED); + goto out_ack; + } + } + retry_write: + if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; writeb(byte, i2c->regs + S3C2410_IICDS); @@ -377,17 +387,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * going to do any more read/write */ - if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) && - !(is_msglast(i2c) && is_lastmsg(i2c))) { - - if (iicstat & S3C2410_IICSTAT_LASTBIT) { - dev_dbg(i2c->dev, "READ: No Ack\n"); - - s3c24xx_i2c_stop(i2c, -ECONNREFUSED); - goto out_ack; - } - } - byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; -- 2.39.2