From 05faadcf59507e8eea57ffbeea9cbb14c9a2ab3d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Oct 2011 18:09:14 -0700 Subject: [PATCH] lis3: fix regression of HP DriveGuard with 8bit chip Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a regression on HP laptops with 8bit chip. Writing CTRL2_BOOT_8B bit seems clearing the BIOS setup, and no proper interrupt for DriveGuard will be triggered any more. Since the init code there is basically only for embedded devices, put a pdata check so that the problematic initialization will be skipped for hp_accel stuff. Signed-off-by: Takashi Iwai Cc: Eric Piel Cc: Samu Onkalo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/lis3lv02d/lis3lv02d.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c index b928bc14e97b..8b51cd62d067 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d.c +++ b/drivers/misc/lis3lv02d/lis3lv02d.c @@ -375,12 +375,14 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3) * both have been read. So the value read will always be correct. * Set BOOT bit to refresh factory tuning values. */ - lis3->read(lis3, CTRL_REG2, ®); - if (lis3->whoami == WAI_12B) - reg |= CTRL2_BDU | CTRL2_BOOT; - else - reg |= CTRL2_BOOT_8B; - lis3->write(lis3, CTRL_REG2, reg); + if (lis3->pdata) { + lis3->read(lis3, CTRL_REG2, ®); + if (lis3->whoami == WAI_12B) + reg |= CTRL2_BDU | CTRL2_BOOT; + else + reg |= CTRL2_BOOT_8B; + lis3->write(lis3, CTRL_REG2, reg); + } /* LIS3 power on delay is quite long */ msleep(lis3->pwron_delay / lis3lv02d_get_odr()); -- 2.39.2