Linux 2.6.12-rc6

Getting ready for the real release..

[PATCH] serial: update NEC VR4100 series serial support

- Changed the return value of unknown type to NULL.

- Deleted the NULL check of dev_id in siu_interrupt().

- Deleted the NULL check of port->membase in siu_shutdown().

- Added the NULL check of port->membase to siu_startup().

- Removed early_uart_ops. Now using vr41xx_siu standerd one.

- Changed KSEG1ADDR() in siu_console_setup() to ioremap().

- When uart_add_one_port() failed, changed to set NULL to port->dev.

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: deadlock in appldata

The system might hang when using appldata_mem with high I/O traffic and a
large number of devices.  The spinlocks bdev_lock and swaplock are acquired
via calls to si_meminfo() and si_swapinfo() from a tasklet, i.e.  interrupt
context, which can lead to a deadlock.  Replace tasklet with work queue.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: in_interrupt vs. in_atomic

The condition for no context in do_exception checks for hard and soft
interrupts by using in_interrupt() but not for preemption.  This is bad for
the users of __copy_from/to_user_inatomic because the fault handler might call
schedule although the preemption count is != 0.  Use in_atomic() instead
in_interrupt().

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: uml ptrace fixes

To make UML build and run on s390, I needed to do these two little
changes:

1) UML includes some of the subarch's (s390) headers. I had to
   change one of them with the following one-liner, to make this
   compile. AFAICS, this change doesn't break compilation of s390
   itself.

2) UML needs to intercept syscalls via ptrace to invalidate the syscall,
   read syscall's parameters and write the result with the result of
   UML's syscall processing. Also, UML needs to make sure, that the host
   does no syscall restart processing. On i386 for example, this can be
   done by writing -1 to orig_eax on the 2nd syscall interception
   (orig_eax is the syscall number, which after the interception is used
   as a "interrupt was a syscall" flag only.
   Unfortunately, s390 holds syscall number and syscall result in gpr2 and
   its "interrupt was a syscall" flag (trap) is unreachable via ptrace.
   So I changed the host to set trap to -1, if the syscall number is changed
   to an invalid value on the first syscall interception.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: ptrace peek and poke

The special cases of peek and poke on acrs[15] and the fpc register are not
handled correctly.  A poke on acrs[15] will clobber the 4 bytes after the
access registers in the thread_info structure.  That happens to be the kernel
stack pointer.  A poke on the fpc with an invalid value is not caught by the
validity check.  On the next context switch the broken fpc value will cause a
program check in the kernel.  Improving the checks in peek and poke fixes
this.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mpage_end_io_write() I/O error handling fix

When fsync() runs wait_on_page_writeback_range() it only inspects pages which
are actually under I/O (PAGECACHE_TAG_WRITEBACK).  If a page completed I/O
prior to wait_on_page_writeback_range() looking at it, it is supposed to have
recorded its I/O error state in the address_space.

But mpage_mpage_end_io_write() forgot to set the address_space error flag in
this case.

Signed-off-by: Qu Fuping <fs@ercist.iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Automatic merge of 'misc-fixes' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

Merge ... /spare/repo/netdev-2.6 branch r8169-fix

[PATCH] prom_find_machine_type typo breaks pSeries lpar boot

A typo in prom_find_machine_type from Ben's recent patch "ppc64: Fix
result code handling in prom_init" prevents pSeries LPAR systems from
booting.

Tested on a pSeries 570 and OpenPower 720 (both Power5 LPAR).

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge ... parisc-linux.org/~jejb/git/scsi-for-linus-2.6

[PATCH] m68knommu: fix scheduling and race problems in idle loop

Re-work the m68knommu specific idle code according to suggestions
from Nick Piggin <nickpiggin@yahoo.com.au>.

A couple of rules that we need to follow:

1. Preempt should now disabled over idle routines. Should only be enabled
to call schedule() then disabled again.

3. When cpu_idle finds (need_resched() == 'true'), it should call schedule().
It should not call schedule() otherwise.

Also fix interrupt locking around the need_resched() and cpu stop state
so that there is no race condition.

Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] USB: resolve Zaurus problem

This "obvious" one-liner is needed to recognize Zaurus SL 6000;
it just checks two GUIDs not just one.

OSDL bugids #4512 and #4545 seem to be duplicates of this report.

From: Gerald Skerbitz <gsker@tcfreenet.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[SCSI] fix slab corruption during ipr probe

With CONFIG_DEBUG_SLAB=y I see slab corruption messages during boot on
pSeries machines with IPR adapters with any 2.6.12-rc kernel.

The change which seems to have introduced the problem is "SCSI: revamp
target scanning routines" and may be found at:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111093946426333&w=2

In order to revert that in a 2.6.12-rc1 tree, I had to revert "target
code updates to support scanned targets" first:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111094132524649&w=2

With both patches reverted, the corruption messages go away.

ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21,
2005)
ipr 0001:d0:01.0: Found IOA with IRQ: 167
ipr 0001:d0:01.0: Starting IOA initialization sequence.
ipr 0001:d0:01.0: Adapter firmware version: 020A005C
ipr 0001:d0:01.0: IOA initialized.
scsi0 : IBM 570B Storage Adapter
  Vendor: IBM       Model: VSBPD4E1  U4SCSI  Rev: 4770
  Type:   Enclosure                          ANSI SCSI revision: 02
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM       Model: VSBPD4E1  U4SCSI  Rev: 4770
  Type:   Enclosure                          ANSI SCSI revision: 02
Slab corruption: start=c0000001e8de5268, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50)
080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a
Prev obj: start=c0000001e8de5050, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<0000000000000000>](0x0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Next obj: start=c0000001e8de5480, len=512
Redzone: 0x170fc2a5/0x170fc2a5.
Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228)
000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00
010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98
Slab corruption: start=c0000001e8de5268, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50)
080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a
Prev obj: start=c0000001e8de5050, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<0000000000000000>](0x0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Next obj: start=c0000001e8de5480, len=512
Redzone: 0x170fc2a5/0x170fc2a5.
Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228)
000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00
010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98
...

I did some digging and the problem seems to be a refcounting issue in
__scsi_add_device.  The target gets freed in scsi_target_reap, and
then __scsi_add_device tries to do another device_put on it.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: fix bad locking during eh_abort

Correct incorrect locking order in qla2xxx_eh_abort() handler which
would case a hang during certain code-paths.

With extra pieces to fix the irq state in the locks.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[PATCH] USB: CP2101 Add support for flow control

Added support to get/set flow control line levels using TIOCMGET and
TIOCMSET.
Added support for RTSCTS hardware flow control.
cp2101_get_config and cp2101_set_config modified to support long request
strings, required for configuring flow control.

Signed-off-by: Craig Shelley craig@microtron.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: update urb documentation

On Wed, May 04, 2005 at 01:37:30PM -0700, David Brownell wrote:
> On Wednesday 04 May 2005 12:19 pm, Roman Kagan wrote:
> > struct urb {
> >  /* private, usb core and host controller only fields in the urb */
> >  ...
> >  struct list_head urb_list; /* list pointer to all active urbs */
> >  ...
> > };
> >
> > Is it safe to use it for driver's purposes when the driver owns the urb,
> > that is, starting from the completion routine until the urb is submitted
> > with usb_submit_urb()?
>
> Right now, it should be.

Great!  FWIW I've briefly tested a modified version of usbatm using
the list head in struct urb instead of creating a wrapper struct, and I
haven't seen any failures yet.  So I tend to believe that your "should
be" actually means "is" :)

> > If it is, can it be guaranteed in future, e.g.
> > by moving the list head into the public section of struct urb?
>
> In fact I'm not sure why it ever got called "private" to usbcore/hcds.
> I thought the idea was that it should be like urb->status, reserved for
> whoever controls the URB.

OK then how about the following (essentially documentation) patch?

Signed-off-by: Roman Kagan <rkagan@mail.ru>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB Storage: Add unusual_devs for Trumpion Voice Recorder

The original entry of this patch was submitted by Filippo Bardelli
<filibard@libero.it>, with cleanups and patch-ification by me.

This corrects the subclass that the device reports.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: make MODALIAS code a bit smaller devices

This patch makes the code to provide modalias in sysfs for usb devices
56 bytes smaller in i386, while making it clear that the first part of
the modalias string is the same no matter what the device class is.

Signed-Off-By: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: add Option Card driver

This patch adds a new driver for "Option" cards.  This is a GSM data card,
controlled by three "serial ports" which are connected via an OHCI adapter,
all located on an oversized PC-Card.  It's sold by several GSM service
providers.

Traditionally, this card has been accessed via the standard serial driver
and appropriate vendor= and product= options.  However, testing has
revealed several problems with this approach, including hung data transfers
and lost data blocks when receiving.

Therefore, I've written a separate driver.

Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: add Vernier devices to HID blacklist

They aren't really HID devices.

Damm microsoft HID driver, that thing has caused more companies to have
to do this kind of hack...

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: hid-core: add Earthmate lt-20 productid to blacklist table

This patch adds the DeLorme Earthmate lt-20 productid to the hid
blacklist table.  This patch ensures the lt-20 can be claimed by the
appropriate driver (cypress_m8).

Adds the product id 0x200, of the DeLorme Earthmate lt-20, to the hid
blacklist table.

Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: add new wacom device to usb hid-core list

- add Intuos3 and Cintiq 21UX

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: remove drivers/usb/media/pwc/ChangeLog

This patch removes the outdated ChangeLog file for this driver.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: Support multiply-LUN devices in ub

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff -urp -X dontdiff linux-2.6.12-rc3/drivers/block/ub.c linux-2.6.12-rc3-lem/drivers/block/ub.c

Merge ... /pub/scm/linux/kernel/git/davem/net-2.6

[NET]: Fix HH_DATA_OFF.

When the hardware header size is a multiple of HH_DATA_MOD, HH_DATA_OFF()
incorrectly returns HH_DATA_MOD (instead of 0). This affects ieee80211 layer
as 802.11 header is 32 bytes long.

Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Fix locking in shaper driver.

 o use a semaphore instead of an opencoded and racy lock
 o move locking out of shaper_kick and into the callers - most just
   released the lock before calling shaper_kick
 o remove in_interrupt() tests.  from ->close we can always block, from
   ->hard_start_xmit and timer context never

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge of 'docs' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Merge ... /spare/repo/linux-2.6/.git branch HEAD

libata: kernel-doc warning fixes

libata: update inline source docs

[PATCH] drivers/net/hamradio/baycom_epp.c: cleanups

The times when tricky goto's produced better codes are long gone.

This patch should express the same in a better way.

(Also fixes the final gcc-4.0 x86 compile error)

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: remove decr_overclock

Now that we have HZ=1000 there is much less of a need for decr_overclock.
Remove it.

Leave spread_lpevents but move it into iSeries_setup.c.  We should look at
making event spreading the default some day.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: cleanup iseries runlight support

The iseries has a bar graph on the front panel that shows how busy it is.
The operating system sets and clears a bit in the CTRL register to control
it.

Instead of going to the complexity of using a thread info bit, just set and
clear it in the idle loop.

Also create two helper functions, ppc64_runlatch_on and ppc64_runlatch_off.

Finally don't use the short form of the SPR defines.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: cleanup SPR definitions

There are a bunch of irrelevant SPR definitions in asm/processer.h.  Cut
them down a bit, also add a DABR_TRANSLATION define which will be used
shortly.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: fix list scanning in __cleanup_transaction

Fix a bug in list scanning that can cause us to skip the last buffer on the
checkpoint list (and hence fail to do any progress under some rather
unfavorable conditions).

The problem is we first do jh=next_jh and then test

} while (jh!=last_jh);

Hence we skip the last buffer on the list (if it was not the only buffer on
the list).  As we already do jh=next_jh; in the beginning of the loop we
are safe to just remove the assignment in the end.  It can happen that 'jh'
will be freed at the point we test jh != last_jh but that does not matter
as we never *dereference* the pointer.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: fix log_do_checkpoint() assertion failure

Fix possible false assertion failure in log_do_checkpoint().  We might fail
to detect that we actually made a progress when cleaning up the checkpoint
lists if we don't retry after writing something to disk.  The patch was
confirmed to fix observed assertion failures for several users.

When we flushed some buffers we need to retry scanning the list.
Otherwise we can fail to detect our progress.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[IPV6]: Kill export of fl6_sock_lookup.

There is no usage of this EXPORT_SYMBOL in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ATM]: [drivers] kill pointless NULL checks and casts before kfree()

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ATM]: fix ATM makefile for out-of-source-tree builds

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPVS]: remove net/ipv4/ipvs/ip_vs_proto_icmp.c

ip_vs_proto_icmp.c was never finished.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] ppc64: Fix result code handling in prom_init

prom_init(), the trampoline code that "talks" to Open Firmware during
early boot, has various issues with managing OF result codes. Some of my
recent fixups in fact made the problem worse on some platforms.

This patch reworks it all. Tested on g5, Maple, POWER3 and POWER5.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge ... /pub/scm/linux/kernel/git/aegl/linux-2.6

Merge ... /linux/kernel/git/sfrench/cifs-2.6

[IA64] fix compilation warning in sys32_epoll_wait()

This gets rid of an unused variable `error' in sys_ia32.c:sys32_epoll_wait()

Getting rid of this one makes parsing the output of the kernecomp
autobuild easier --- searching for `Error' to find a problem kept
hitting this one, even though it's only a warning.

Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Cleanup compile warnings for ski config

The attached patch cleans up a compilation warning when ACPI
is turned off (i.e., when compiling for the Ski simulator).

Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge ... /pub/scm/linux/kernel/git/davem/net-2.6

Merge ... /linux/kernel/git/davem/sparc-2.6

Merge ... /pub/scm/linux/kernel/git/gregkh/usb-2.6

Merge ... /pub/scm/linux/kernel/git/gregkh/i2c-2.6

Merge ... /pub/scm/linux/kernel/git/gregkh/pci-2.6

[PATCH] ppc32/ppc64: cleanup /proc/device-tree

This cleans up the /proc/device-tree representation of the Open Firmware
device-tree on ppc and ppc64.  It does the following things:

 - Workaround an issue in some Apple device-trees where a property may
   exist with the same name as a child node of the parent.  We now
   simply "drop" the property instead of creating duplicate entries in
   /proc with random result...

 - Do not try to chop off the "@0" at the end of a node name whose unit
   address is 0.  This is not useful, inconsistent, and the code was
   buggy and didn't always work anyway.

 - Do not create symlinks for the short name and unit address parts of a
   node.  These were never really used, bloated the memory footprint of
   the device-tree with useless struct proc_dir_entry and their matching
   dentry and inode cache bloat.

This results in smaller code, smaller memory footprint, and a more
accurate view of the tree presented to userland.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Apple device-tree bug fix

This is the ppc32 patch equivalent to the just posted ppc64 one working
around a bug in Apple device-trees regarding the "cpus" nodes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: Fix a device-tree bug on Apple's

Apple's Open Firmware has a funny bug when creating the /cpus nodes
where it leaves a dangling '\0' character in the CPU name which ends up
appearing in the full path of the node. This is bogus and
confuses /proc/device-tree badly.

This patch strips those bogus zero's from the node full path when
reading the device-tree from Open Firmware. The "name" property is not
modified and still contains the spurrious 0 (it basically contains 0
tailing 0 instead of one) but that shouldn't be a problem.

An equivalent patch for ppc32 will follow shortly

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[SPARC64]: Refine PCI strbuf ctx-based flush.

The initial peek read PIO of the match register is just a waste.
Just do the flush writes first, as that is more efficient.

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] cpufreq-stats driver documentation

Documentation for cpufreq stats.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] cpufreq-stats driver updates

Changes to the cpufreq stats driver:
* Changes the way P-state transition table looks in /sysfs providing more
  clear output
* Changes the time unit in the output from HZ to clock_t

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Typos.

cpfureq developers cant spel.

Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] longhaul - adjust transition latency.

From patch by: Ken Staton <ken_staton@agilent.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Longhaul: Magic timer frobbing.

As mandated by the spec, disable timer around transitions.

From code by : Ken Staton <ken_staton@agilent.com
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] longhaul - disable PCI mastering around transition.

The spec states that we have to do this, which is *horrid*.

Based on code from: Ken Staton <ken_staton@agilent.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand governor default sampling downfactor as 1

[PATCH] [5/5] ondemand governor default sampling downfactor as 1

Make default sampling downfactor 1.
This works better with earlier auto downscaling change in ondemand governor.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand governor automatic downscaling

[PATCH] [4/5] ondemand governor automatic downscaling

Here is a change of policy for the ondemand governor. The modification
concerns the frequency downscaling. Instead of decreasing to a lower
frequency when the CPU usage is under 20%, this new policy automatically
scales to the optimal frequency. The optimal frequency being the lowest
frequency which provides enough power to not trigger the upscaling policy.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand,conservative governor idle_tick clean-up

[PATCH] [3/5] ondemand,conservative governor idle_tick clean-up

Ondemand and conservative governor clean-up, it factorises the idle ticks
measurement.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand,conservative governor store the idle ticks for all cpus

[PATCH] [2/5] ondemand,conservative governor store the idle ticks for all cpus

Ondemand, conservative governor did not store prev_cpu_idle_up into
prev_cpu_idle_down for other CPUs than the current CPU.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand,conservative minor bug-fix and cleanup

[PATCH] [1/5] ondemand,conservative minor bug-fix and cleanup

Attached patch fixes some minor issues with Alexander's patch and related
cleanup in both ondemand and conservative governor.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Allow ondemand stepping to be changed by user.

Adds support so that the cpufreq change stepping is no longer fixed at 5% and
can be changed dynamically by the user

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Prevents un-necessary cpufreq changes if we are already at min/max

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Add support to cpufreq_ondemand to ignore 'nice' cpu time

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Conservative cpufreq governer

A new cpufreq module, based on the ondemand one with my additional patches
just posted.  This one is more suitable for battery environments where its
probably more appealing to have the cpu freq gracefully increase and decrease
rather than flip between the min and max freq's.

N.B. Bruno Ducrot pointed out that the amd64's "do have unacceptable latency
between min and max freq transition, due to the step-by-step requirements
(200MHz IIRC)"; so AMD64 users would probably benefit from this too.

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] fix up comment in cpufreq.h

Fix up comment in cpufreq.h stating transition latency should be passed
in microseconds -- it was decided long ago to switch to nanoseconds.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] dual-core powernow-k8

With the release of the dual-core AMD Opterons last week,
it's high time that cpufreq supported them.  The attached
patch applies cleanly to 2.6.12-rc3 and updates powernow-k8
to support the latest Athlon 64 and Opteron processors.

Update the driver to version 1.40.0 and provide support
for dual-core processors.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] make cpufreq_gov_dbs static

This patch makes a needlessly global and EXPORT_SYMBOL'ed struct static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Recalibrate cpu_khz [2/2]

Some cpufreq drivers (at that time, only powernow-k7) need to recalibrate the
cpu_khz at runtime.

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Recalibrate cpu_khz [1/2]

We have to recalibrate cpu_khz in order to use the current FID instead the max
FID since some BIOS do not put the processor at maximum frequency at POST.
Also, some BIOS will change the processor frequency at our back after cpu_khz
was calibrate.  Finally, this will fix a long standing bug when we do
something like this:

# rmmod powernow-k7
# modprobe powernow-k7

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] AMD Elan SC520 cpufreq driver.

From: Sean Young <sean@mess.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] Add warning comment about default governors.

This comes up time and time again. Until its fixed, place this
comment in the Kconfig which should stem the flow of resubmissions.

Signed-off-by: Rob Weryk <rjweryk@uwo.ca>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] speedstep-smi: it works on at least one P4M

The speedstep-smi driver actually works on >=1 notebook with a
Pentium 4-M CPU where all other cpufreq drivers fail. Therefore,
allow speedstep-smi on P4Ms again, but warn users of likely failure

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] ondemand: trivial clean-ups

Trivial ondemand governor clean-ups:
- change from sampling_rate_in_HZ() to the official function
usecs_to_jiffies().
- use for_each_online_cpu() to instead of using "if (cpu_online(i))"

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] speedstep-centrino: Pentium 4 - M (HT) support

The Pentium 4 - Ms (HT) with CPUID 0xF34 and 0xF41 seem to support
centrino-like enhanced speedstep; however, no "table" support is possible.
Therefore, put NULL entries into speedstep-centrino.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] cpufreq-core: reduce warning messages.

cpufreq core is printing out messages at KERN_WARNING level that the core
recovers from without intervention, and that the system administrator can
do nothing about.  Patch below reduces the severity of these messages to
debug.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[CPUFREQ] powernow-k7: don't print khz element of FSB.

Signed-off-by: Dave Jones <davej@redhat.com>

libata: more docs updates

[IPSEC]: Fix esp_decap_data size verification in esp4.

Signed-off-by: Edgar E Iglesias <edgar@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix streaming buffer flushing on PCI and SBUS.

Firstly, if the direction is TODEVICE, then dirty data in the
streaming cache is impossible so we can elide the flush-flag
synchronization in that case.

Next, the context allocator is broken.  It is highly likely
that contexts get used multiple times for different dma
mappings, which confuses the strbuf flushing code and makes
it run inefficiently.

Signed-off-by: David S. Miller <davem@davemloft.net>

[PKT_SCHED]: Disable dsmark debugging messages by default

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PKT_SCHED]: make dsmark try using pfifo instead of noop while grafting

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PKT_SCHED]: Fix dsmark to count ignored indices while walking

Unused indices which are ignored while walking must still
be counted to avoid dumping the same index twice.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] UDF filesystem: array '__mon_yday' declared as not static

in fs/udf/udftime.c the global array '__mon_yday' is not static, and it
conflicts with the glibc one when the kernel is compiled as user mode.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcdp.c build fix

In file included from drivers/firmware/pcdp.c:18:
drivers/firmware/pcdp.h:48: error: field `addr' has incomplete type
drivers/firmware/pcdp.c: In function `setup_serial_console':
drivers/firmware/pcdp.c:27: error:  `ACPI_ADR_SPACE_SYSTEM_MEMORY' undeclared (first use in this  function)

Cc: <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] flush icache in correct context

flush_icache_range() is used in two different situation - in binfmt_elf.c &
co for user space mappings and module.c for kernel modules.  On m68k
flush_icache_range() doesn't know which data to flush, as it has separate
address spaces and the pointer argument can be valid in either address
space.

First I considered splitting flush_icache_range(), but this patch is
simpler.  Setting the correct context gives flush_icache_range() enough
information to flush the correct data.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: allow timer based profiling on iseries

We used to have an iseries specific profiler that used /proc/profile.  Now
thats gone we can use the generic timer based stuff.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] h8300 sleep problem

h8300 appears to sleep (halt) when need_resched IS set.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] acpi build fix: x86 setup.c

This is a neverending story

linux/acpi.h contains empty declarations for acpi_boot_init() &
acpi_boot_table_init() but they are nested inside #ifdef CONFIG_ACPI.

So we'll have to #ifdef in arch/i386/kernel/setup.c: setup_arch()

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64 CONFIG_ACPI=n build fix

Make CONFIG_X86_PM_TIMER dependent on CONFIG_ACPI

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: More fixes for compilation without CONFIG_ACPI

Suggested by Alexander Nyberg

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PCI Hotplug: more CPCI updates

Here is my third attempt at a patch to further update the CompactPCI
hotplug driver infrastructure to address the pci_enable_device issue
discussed on the list as well as a few other issues I discovered during
some more testing.  This version addresses a few more issues pointed out
by Prarit Bhargava.  Changes include:
- cpci_enable_device and its recursive calling of pci_enable_device on
  new devices removed.
- Use list_rwsem to avoid slot status change races between disable_slot
  and check_slots.
- Fixed oopsing in cpci_hp_unregister_bus caused by calling list_del on
  a slot after calling pci_hp_deregister.
- Removed kfree calls in cleanup_slots since release_slot will have
  done it already.
- Reworked init_slots a bit to fix latch and adapter file updating on
  subsequent calls to cpci_hp_start.
- Improved sanity checking in cpci_hp_register_controller.
- Now shut things down correctly in cpci_hotplug_exit.
- Switch to pci_get_slot instead of deprecated pci_find_slot.
- A bunch of CodingStyle fixes.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: amd74xx patch for new NVIDIA device IDs

Here's the 2.6 amd74xx patch for NVIDIA MCP51.

Signed-off-by: Andy Currid <acurrid@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug: SHPCHP driver doesn't enable PERR and SERR properly

Current shpchp driver doesn't seem to program command register to
enable PERR and SERR properly. The following patch fixes this issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>