[PATCH] x86_64: Support more than 8 cores on AMD systems

Use physical mode instead of logical mode to address more CPUs.  This is also
used in the CPU hotplug case to avoid a race.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove the broadcast options that were added for cpuhotplug

Will be obsolete with physflat.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove IA32_* build tools in Makefile

Not used anymore since quite some time. Just uses -m32 instead.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Create per CPU machine check sysfs directories

This patch will create machinecheck sysdev directories per CPU.  All of the
cpus still share the same ctl banks.  When compiled with CONFIG_HOTPLUG_CPU,
it will also bring up/down sysdev directories as cpus go up/down.  I have
tested the patch along with CONFIG_HOTPLUG_CPU option on in 2.6.13-rc1 kernel.

Minor changes by AK: remove useless unload function

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Print a boot message for hotplug memory zones

From: Keith Manning

Print a boot message for hotplug memory zones

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix overflow in NUMA hash function setup

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix incorrectly defined MSR_K8_SYSCFG

Harmless because the kernel didn't use it.  Noticed by Travis Betak

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix some typos in system.h comments

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove obsolete eat_key prototype

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix some comments in tlbflush.h

Were either outdated or misleading.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Some updates for boot-options.txt

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Improve CONFIG_GART_IOMMU description and make it default y

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove unused variable in delay.c

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Some cleanup in setup64.c

Minor cleanup.

Move things into their include files, remove obsolete includes, fix
indentation, remove obsolete special cases etc.

I also added the per cpu section to asm-generic/sections.h and fixed
init/main.c to use it.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Clarify Booting processor ... message

No need to print kernel addresses there and clarify what the APIC-ID is.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Minor clean up to CPU setup - use smp_processor_id instead of custom hack

Does not change any semantics because numa_add_cpu checks for CPU 0 anyways.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Move cpu_present/possible_map parsing earlier

Various code needs this information now before the actual SMP bootup.  Instead
of computing it on the fly while booting the other CPUs set it up now while
initial MPtable/MADT parsing.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: i386/x86_64: remove prototypes for not existing functions in smp.h

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Use for_each_cpu_mask for clustered IPI flush

Makes it slightly more efficient.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Always ack IPIs even on errors

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: cpu hotplug changes kills nmi watchdog

When the x86_64 cpu hotplug changes went in it added a check in
default_do_nmi() which kills NMI delivery on any CPU but the BSP.

The NMI watchdog is brought up quite some time before the online bit is set
in num_online_cpus so this won't work very well.  The nmi watchdogs on cpus
that are not BSP will never be reprogrammed and no NMIs.

Why was this check added? How does an offlined cpu receive an NMI?

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Cc: <ashok.raj@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Linux 2.6.13-rc4

[PATCH] fix gconfig crash

I ran glade-2 on the glade file, fixed two missing stock icons and
cleaned up the C code that inserts the single/split/full modes. The
rest of the patch is minor cleanups only. I refrained from using all
the included xpm icons in images.c (like qconf.cc does) in favour of
using the stock Gtk+ icons instead. Oh, yes there was a "back" bug
in split mode that I also removed, oh well...

It has been tested with success by several people, including
Jesper Juhl, Randy Dunlap and myself.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert broken "statement with no effect" warning fix

It may shut up gcc, but it also incorrectly changes the semantics of the
smp_call_function() helpers.

You can fix the warning other ways if you are interested (create another
inline function that takes no arguments and returns zero), but
preferably gcc just shouldn't complain about unused return values from
statement expressions in the first place.

Merge /pub/scm/linux/kernel/git/perex/alsa

[PATCH] speed up on find_first_bit for i386 (let compiler do the work)

Avoid using "rep scas", just let the compiler select a sequence of
regular instructions.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] alpha: fix "statement with no effect" warnings

Apparently gcc 4.0 complains about "({ 0; });", which leads to -Werror
breakage in one of the alpha oprofile modules.

One might could argue that this is a gcc bug, in that statement-expressions
should be considered to be function-like rather than statement-like for the
purposes of this warning.  But it's just as easy to use an inline function
in the first place, side-stepping the issue.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PCDP: if PCDP contains parity information, use it

If the PCDP supplies parity, use it (only none/even/odd supported), and
don't append parity/stop bit arguments unless baud is present.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] e1000: no need for reboot notifier

sys_reboot() now calls device_suspend(), so it is no longer necessary for
the e1000 driver to register a reboot notifier [in fact doing so results in
e1000_suspend() getting called twice].

(akpm: we need to fast-track this.  It's causing ia64 to oops on shutdown)

Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: <cramerj@intel.com>
Cc: <john.ronciak@intel.com>
Cc: <ganesh.venkatesan@intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] SELinux: default labeling of MLS field

Implement kernel labeling of the MLS (multilevel security) field of
security contexts for files which have no existing MLS field.  This is to
enable upgrades of a system from non-MLS to MLS without performing a full
filesystem relabel including all of the mountpoints, which would be quite
painful for users.

With this patch, with MLS enabled, if a file has no MLS field, the kernel
internally adds an MLS field to the in-core inode (but not to the on-disk
file).  This MLS field added is the default for the superblock, allowing
per-mountpoint control over the values via fixed policy or mount options.

This patch has been tested by enabling MLS without relabeling its
filesystem, and seems to be working correctly.

Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cs89x0: collect tx_bytes statistics

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix incorrect Asus k7m irq router detection

This patch:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111955644929114&w=2
uncovered a k7m bios bug, where the VT82C686A router is reported as
being "586-compatible". The two chips have different pirq mapping, so
this leads to "irq routing conflict" on many pci devices.

The suggested fix was discussed with Aleksey Gorelov, who helped me
to identify the problem as a probable bios bug.

Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss per disk queue

This patch adds per disk queue functionality to cciss.  Sometime back I
submitted a patch but it looks like only part of what I needed.  In the 2.6
kernel if we have more than one logical volume the driver will Oops during
rmmod.  It seems all of the queues actually point back to the same queue.
So after deleting the first volume you hit a null pointer on the second
one.

This has been tested in our labs.  There is no difference in performance,
it just fixes the Oops.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: disable read prefetch/write burst on old O2Micro bridges

Older O2Micro bridges have problems with both read prefetch and write burst
depending on the combination of the chipset, bridge, cardbus card.  safest is
to disable read prefetch and write burst on those old bridges.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] yenta: free_irq() on suspend.

Resume doesn't seem to work without.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: fix sharing IRQs and request_irq without IRQ_HANDLE_PRESENT

Debugging and description from: Noah Misch <noah@cs.caltech.edu>

When a driver calls pcmcia_request_irq with IRQ_HANDLE_PRESENT unset, it looks
for an open IRQ by request_irq()ing with a dummy handler and NULL dev_info.
free_irq uses dev_info as a key for identifying the handler to free among
those sharing an IRQ, so request_irq returns -EINVAL if dev_info is NULL and
the IRQ may be shared.  That unknown error code is the -EINVAL.

It looks like only pcnet_cs and axnet_cs are affected.  Most other drivers let
pcmcia_request_irq install their interrupt handlers.  sym53c500_cs requests
its IRQ manually, but it cannot share an IRQ.

The appended patch changes pcmcia_request_irq to pass an arbitrary, unique,
non-NULL dev_info with the dummy handler.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: update documentation

Update the PCMCIA documentation to reflect some more, though older, changes.
Parts extracted from an e-mail from Randy Dunlap with his consent.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: fix many device IDs

If the product-id-string contains the '+' , '&' ,'_', it was not converted
properly from the /etc/pcmcia/config(pcmcia-cs config file).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: avoid duble iounmap of one address

Avoid double iounmap of one address, and disable cis_virt if set_mem_map
failed.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: update au1000 to work with recent changes

Get the au1000 PCMCIA socket drivers to work.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: remove duplicates in orinoco_cs

Remove duplicates from the device id table.

Signed-off-by: Jarkko Raja <jar@pcuf.fi>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: fix comment

There are two problems with the message about missing callback functions: it's
not written in correct English and it lacks newline at the end.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: ide-cs id_table update

SanDisk ConnectPlus has two functions.  Function 0 is prism2 card, currently
only supported by HostAP (not in the kernel).  Function 1 is 128M flash,
supported by ide-cs.  This patch adds an entry for function 1 to ide-cs.c.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] bio_clone fix

Fix bug introduced in 2.6.11-rc2: when we clone a BIO we need to copy over the
current index into it as well.

It corrupts data with some MD setups.

See http://bugzilla.kernel.org/show_bug.cgi?id=4946

Huuuuuuuuge thanks to Matthew Stapleton <matthew4196@gmail.com> for doggedly
chasing this one down.

Acked-by: Jens Axboe <axboe@suse.de>
Cc: <linux-raid@vger.kernel.org>
Cc: <dm-devel@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[ALSA] version 1.0.9b

[ALSA] wavefront - declare initialization data as static

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] via82xx - Fix dxs_support of twinhead laptop

VIA82xx driver
Changed the dxs_support value of twinhead laptop to DXS_SRC.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Jack Sense support for AD1980 and AD1888

AC97 Codec
Attached patch adds 'Jack Sense' controls for AD1980 and AD1888 chips.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] vx-driver - Fix the calculation of frequency parameter

Digigram VX core
Fixed the calculation of frequency parameter of vx boards.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda driver, correct bug in model 'auto'

HDA Codec driver
- Correct some index variable inversion in patch_cmedia.c

Signed-off-by: Nicolas Graziano <nicolas.graziano@wanadoo.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] sound/core Fix the sparse warning 'implicit cast to nocast type'

Memalloc module,ALSA Core,Instrument layer
Fix the sparse warning 'implicit cast to nocast type'

File/Subsystem:sound/core

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] usb-audio - change quirk type handling

USB generic driver
Make the quirk type an enum instead of a #defined integer, and use a
table for the quirk constructor functions instead of a big switch
statement.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] usb-audio - add support for Miditech USB MIDI keyboards

USB generic driver
Add support for Miditech Midistart and MidiStudio keyboards (another
case of devices using the standard protocol but having no descriptors).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] seq-midi - silently ignore non-MIDI events

ALSA sequencer
When non-MIDI sequencer events are sent to a RawMIDI port, silently
ignore them instead of returning a confusing error code which may upset
the sequencer and abort the current write() to /dev/snd/seq.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] ac97 - remove unused variable

AC97 Codec
remove a variable made obsolete by the last change

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] ac97: Fix volume control bit size detection for STAC9704.

AC97 Codec

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ALSA] emu10k1: Add EMU 1212m card entry and document it as not supported yet.

EMU10K1/EMU10K2 driver

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ALSA] Fix-up sleeping in sound/usb

USB generic driver,USB USX2Y
Description: Fix-up sleeping in sound/usb. Replace big_mdelay() with
msleep() to guarantee the task delays as expected. This also involved
replacing/removing custom sleep functions.

Patch is compile-tested.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix-up sleeping in sound/ppc

PPC AWACS driver,PPC PMAC driver,PPC Tumbler driver
Description: Fix-up sleeping in sound/ppc. Replace big_mdelay() with
msleep() to guarantee the task delays as expected. This also involved
replacing/removing custom sleep functions.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] sound/pci: fix-up sleeping paths

ENS1370/1+ driver,ES1968 driver,Intel8x0 driver,VIA82xx driver
VIA82xx-modem driver,AC97 Codec,ALI5451 driver,CS46xx driver
MIXART driver,RME HDSP driver,Trident driver,YMFPCI driver
Description: Fix-up sleeping in sound/pci. These changes fall under the
following two categories:

        1) Replace schedule_timeout() with msleep() to guarantee the
        task delays as expected. This also involved replacing/removing
        custom sleep functions.
        2) Do not assume jiffies will only increment by one if you
        request a 1 jiffy sleep, i.e. use time_after/time_before in
        while loops.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ens1371 - added extra delay for ac97 codec initialization

ENS1370/1+ driver

Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] typo-fix and snd_assert()-expression-split

ALSA Core
This patch corrects a typo in the kerneldocs of snd_info_get_str().
It also splits the expressions of snd_assert() in snd_info_unregister()
into one-expression-per-call for better debugging.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] fix compiler warning

GUS Library
This patch fixes a compiler warning if sequencer is disabled.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] snd-emu10k1: Fixes recognition of Audigy ES.

EMU10K1/EMU10K2 driver
Fixes ALSA bug #1237.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ALSA] emu10k1: Add module option uint subsystem.

EMU10K1/EMU10K2 driver
It allows the user to force the snd-emu10k1 module to think the user
has a particular sound card. Useful if their particular sound card
is not yet recognised.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ALSA] via82xx - changed MSI K7T266 Pro2 - 4005:4710 in white list (SRC enable)

VIA82xx driver

Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hdsp - Add 'Sample Clock Source Locking' control

RME HDSP driver
Added 'Sample Clock Source Locking' control.  If this switch is on,
the clock source can't be changed via PCM hw_params API (as sample rate).
This will fix the problem of OSS-emulation, for example.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda: add sigmatel hp detect support

HDA Codec driver
Adds support for detecting hp insertion/removal and enable/disable of
lineouts based on unsolicited events.

Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda: enable unsolicited responses

HDA Intel driver
Patch enables unsolicited responses on the HDA controller. Without
the UREN bit set, the controller will not place unsolicited responses
in a RIRB.

Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] usb-audio - use bDeviceSubClass to detect MOTU FastLane

USB generic driver
MOTU builds other USB MIDI interfaces with the same product ID as the
FastLane, so we have to check the bDeviceSubClass field to differentiate
between them.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] usb-audio - rename QUIRK_MIDI_MOTU to QUIRK_MIDI_RAW

USB generic driver
Rename the protocol used by the MOTU FastLane to 'raw' because it might
be useful with other devices, and there are other MOTU interfaces that
do not use this protocol.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] usb-audio - enable high speed transfers with Audiy 2 NX

USB generic driver
This patch enables the boot commands to activate high speed mode (and
associated sample formats like 8 channels with 24 bits at 96 kHz) on the
SB Audigy 2 NX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] emu10k1: Added tested status comments.

EMU10K1/EMU10K2 driver

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ALSA] emu10k1: Sort by card id.

EMU10K1/EMU10K2 driver

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ALSA] snd-emu10k1: Tidy mixer controls.

EMU10K1/EMU10K2 driver

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ALSA] snd-emu10k1: Card capabilities tidy up.

EMU10K1/EMU10K2 driver

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ALSA] via82xx - added MSI K7T266 Pro2 - 4005:4710 to white list (DXS enable)

VIA82xx driver
Reporter: Marko Kohtala <marko.kohtala@gmail.com>

Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] usb-audio: add support for an unknown Yamaha USB MIDI device

USB generic driver
Add a quirk for the Yamaha USB MIDI device with USB ID 0x103d.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] Add ARM PXA2xx AC97 driver

Documentation,ARM,/arm/Makefile,ARM PXA2XX driver
Added ARM PXA2xx AC97 driver by Nicolas Pitre
(moved from alsa-driver tree).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Add DBRI driver on Sparcs

Documentation,SPARC,/sparc/Makefile
Add the DBRI driver on Sparcs by Martin Habets <mhabets@users.sourceforge.net>
(moved from alsa-driver tree).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Add help texts to Kconfig

SPARC
Added simple help texts to Kconfig of Sparc sound drivers.
(Better texts are appreciated :)

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] maestro3 - Clean up

Maestro3 driver
- Clean up maestro3 code
- Use msleep()
- Don't enable hw-vol irq when not defined

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Fix resume of intel8x0

Intel8x0 driver,AC97 Codec
Fix resume of intel8x0 driver.  The ac97 codec didn't restore some registers
properly, and the restore of ICH4 SPDIF and SDIN settings was missing.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] cmipci - Add Mic Boost capture switch

CMIPCI driver
Added 'Mic Boost Capture Switch' and 'Phone' switches.
The existing playback switch is renamed as 'Mic Boost Playback Switch'.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] vxpocket - Remove unused code

Digigram VX Pocket driver
Removed unused files (dropped by the last change).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Fix and clean-up of vxpocket driver

Documentation,PCMCIA Kconfig,Digigram VX Pocket driver
- Fixed Oops with request_firmware()
- Detect the card type in runtime (vxpoocket v2 or 440)
- snd-vxp440 driver is merged to snd-vxpocket
- Clean up the code

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Use kstrdup

HDA Codec driver
Use the new kstrdup() function instead of in-house one.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Fix dependency of GUS driver

ALSA sequencer
Add the missing snd-seq-midi-emul to SND_GUS_SYNTH list.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] cleanup and typo-correction

ALSA Core
This patch changes, adds and remove some comments, which will
make now more sense and fit on a 80-char line. It also changes
the order of snd_power_wait() to make the file more readable.
It removes the device.c comment in front of _snd_minor,
cause snd_minor has nothing to do with device.c.
The both typos in the kernel-docs were corrected too.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Fix two typos and changes on snd_assert()

ALSA Core
Both typos were in the kerneldocs.

I splitted the snd_assert() calls in one-expression-per-call for better
debugging.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda-codec - Add entry for Acer APFV

HDA Codec driver
Added the model entry for Acer APFV.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda-codec - Add 6stack model for ALC880

Documentation,HDA Codec driver
- Added a new '6stack' model for ALC880.
- Fixed the typo in 6stack-digout model name.
- Added description for missing models in ALSA-Configuration.txt.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Add new pci device id (SB400) to atiixp-modem

ATIIXP-modem driver
I didn't actually test whether the modem works, but at least the driver
loads and initializes fine.  Please consider inclusion.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] trident - Shut up compile warnings

Trident driver
Shut up compile warnings about uninitialized variables.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda-codec - SigmaTel HDA resume support

HDA Codec driver
Adds resume support to the SigmaTel HDA patch. Please apply.

Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda-codec - SigmaTel HDA multichannel support

HDA Codec driver
Adds 6/8 channel support to the SigmaTel HDA patch. Please apply.

Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] usb-audio - fix capture of non-48k sample rates on Audigy 2 NX

USB generic driver
On the SB Audigy 2 NX, capturing with sample rates that are not a
multiple of 48 kHz does not seem to work, so disable it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] usb-audio - high speed audio support

USB generic driver
Add support for endpoints with bInterval > 1, and decoding of the
wMaxPacketSize field of high-speed endpoints.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] hda-codec - Fix oops with ALC880

HDA Codec driver
- Fixed oops with ALC880 auto-config mode
- Fixed a wrong config table entry for ALC880

Signed-off-by: Takashi Iwai <tiwai@suse.de>