5 years agoOMAPDSS: reduce vsync/go timeouts
Grazvydas Ignotas [Thu, 25 Feb 2016 22:59:26 +0000 (00:59 +0200)]
OMAPDSS: reduce vsync/go timeouts

make timeouts closer to normal vsync timing so that the
program still get somewhat similar timing when the display
is turned off (like lid close on pandora)

5 years agoOMAPDSS: rearrange code, drop nested functions
Grazvydas Ignotas [Thu, 25 Feb 2016 22:51:25 +0000 (00:51 +0200)]
OMAPDSS: rearrange code, drop nested functions

no functional change

5 years agoOMAPDSS: TPO-TD03MTEA1: adjust timings
Grazvydas Ignotas [Thu, 25 Feb 2016 01:10:40 +0000 (03:10 +0200)]
OMAPDSS: TPO-TD03MTEA1: adjust timings

These new timings reduce .vfp to 0 to eliminate the time window between
VFP and vsync as explained here:
Vsyned programs now also have ~1.25ms more time to finish the frame and
perform a fbdev pan operation before DSS reads out the registers.

Note that on pandora, /usr/pandora/scripts/ needs
to be updated too.

5 years agoomap_hsmmc: be more conservative with dma params
Grazvydas Ignotas [Sun, 7 Feb 2016 17:03:07 +0000 (19:03 +0200)]
omap_hsmmc: be more conservative with dma params

dgame reported something what seems to be a SD read corruption he is
getting after a palemoon crash. After more testing done by him it
seems to be caused by 9e0b4807ca06, so only limit the tuned params
to MMC3 now to still get the wifi benefit.

Also revert parameters that are not helping wifi, just to be safe:

Testing is difficult and only dgame can reproduce it, so the exact
cause of his issue remains unclear.

5 years agoHID: logitech: fix Dual Action gamepad support
Grazvydas Ignotas [Sat, 13 Feb 2016 19:49:02 +0000 (21:49 +0200)]
HID: logitech: fix Dual Action gamepad support

The patch that added Logitech Dual Action gamepad support forgot to
update the special driver list for the device. This caused the logitech
driver not to probe unless kernel module load order was favorable.
Update the special driver list to fix it. Thanks to Simon Wood for the

Cc: Vitaly Katraew <>
Fixes: 56d0c8b7c8fb ("HID: add support for Logitech Dual Action gamepads")
Signed-off-by: Grazvydas Ignotas <>
5 years agoHID: add support for Logitech Dual Action gamepads
Vitaly Katraew [Sat, 30 Nov 2013 09:51:28 +0000 (13:51 +0400)]
HID: add support for Logitech Dual Action gamepads

I have two Logitech Dual Action gamepads, both have same Vendor/Device id pair.
Newest gamepad (A) can switch between old mode (HID) and XBox gamepad emulation
mode. Old gamepad (B) can only work in HID mode.  In HID mode gamepad A sends
many EPIPE errors during initialization and was disconnected immediately after
connect  to usb port. It works fine in Win and Mac. After adding NOGET quirk in
driver, it was working properly.  Gamepad B works fine before and after
changes. I tested both gamepads with 3.8.0 and 3.11.6 kernels  with modified
driver. Follow patch can apply for current git kernel version. I can send pcap
log from usb bus with both gamepads or any other additional information if it
is needed

Signed-off-by: Vitaly Katraew <>
Signed-off-by: Jiri Kosina <>
5 years agogadgetfs: set the error code
Grazvydas Ignotas [Sat, 27 Feb 2016 18:34:24 +0000 (20:34 +0200)]
gadgetfs: set the error code

Fixes: 98a0e0adabd49 ('gadgetfs: Fix leak on error in aio_read()')

5 years agoomap_vout: fix compiler warning
Hans Verkuil [Thu, 20 Jun 2013 19:28:16 +0000 (16:28 -0300)]
omap_vout: fix compiler warning

media-git/drivers/media/platform/omap/omap_vout.c: In function ‘omapvid_init’:
media-git/drivers/media/platform/omap/omap_vout.c:382:17: warning: ‘mode’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  vout->dss_mode = video_mode_to_dss_mode(vout);
media-git/drivers/media/platform/omap/omap_vout.c:332:23: note: ‘mode’ was declared here
  enum omap_color_mode mode;

Signed-off-by: Hans Verkuil <>
Cc: Laurent Pinchart <>
Cc: Prabhakar Lad <>
Acked-by: Lad, Prabhakar <>
Signed-off-by: Mauro Carvalho Chehab <>
[ backport]

5 years agortl8192c:dm: Properly initialize local array and set value.
Han Shen [Mon, 22 Apr 2013 20:35:07 +0000 (13:35 -0700)]
rtl8192c:dm: Properly initialize local array and set value.

GCC 4.8 is spitting out uninitialized-variable warnings against
"drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c".  This patch adds
initialization to the variable and properly sets its value.

Signed-off-by: Han Shen (
Acked-by: Larry Finger <>
Signed-off-by: John W. Linville <>
5 years agortlwifi: rtl8192c: Fix W=1 warning
Larry Finger [Fri, 1 Feb 2013 16:40:24 +0000 (10:40 -0600)]
rtlwifi: rtl8192c: Fix W=1 warning

When this driver is built with "make W=1", the following warning occurs:

drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:907:4: warning: comparison is always false due to limited range of data type [-Wtype-limits]

Signed-off-by: Larry Finger <>
Signed-off-by: John W. Linville <>
5 years agoblockdev: convert some macros to static inlines
Stephen Rothwell [Thu, 12 Jan 2012 08:17:30 +0000 (09:17 +0100)]
blockdev: convert some macros to static inlines

We prefer to program in C rather than preprocessor and it fixes this
warning when CONFIG_BLK_DEV_INTEGRITY is not set:

drivers/md/dm-table.c: In function 'dm_table_set_integrity':
drivers/md/dm-table.c:1285:3: warning: statement with no effect [-Wunused-value]

Signed-off-by: Stephen Rothwell <>
Signed-off-by: Jens Axboe <>
5 years agonetfilter: xt_LOG: don't use xchg() for simple assignment
Jan Beulich [Wed, 7 Mar 2012 23:45:44 +0000 (23:45 +0000)]
netfilter: xt_LOG: don't use xchg() for simple assignment

At least on ia64 the (bogus) use of xchg() here results in the compiler
warning about an unused expression result. As only an assignment is
intended here, convert it to such.

Signed-off-by: Jan Beulich <>
Acked-by: Eric Dumazet <>
Signed-off-by: Pablo Neira Ayuso <>
5 years agoecryptfs: fix printk format warning for size_t
Randy Dunlap [Wed, 29 Feb 2012 00:31:12 +0000 (16:31 -0800)]
ecryptfs: fix printk format warning for size_t

Fix printk format warning (from Linus's suggestion):

on i386:
  fs/ecryptfs/miscdev.c:433:38: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'

and on x86_64:
  fs/ecryptfs/miscdev.c:433:38: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'long unsigned int'

Signed-off-by: Randy Dunlap <>
Cc: Geert Uytterhoeven <>
Cc: Tyler Hicks <>
Cc: Dustin Kirkland <>
Signed-off-by: Linus Torvalds <>
5 years agoeCryptfs: Replace miscdev read/write magic numbers
Tyler Hicks [Sat, 14 Jan 2012 15:46:46 +0000 (16:46 +0100)]
eCryptfs: Replace miscdev read/write magic numbers

ecryptfs_miscdev_read() and ecryptfs_miscdev_write() contained many
magic numbers for specifying packet header field sizes and offsets. This
patch defines those values and replaces the magic values.

Signed-off-by: Tyler Hicks <>
5 years agoeCryptfs: Report errors in writes to /dev/ecryptfs
Tyler Hicks [Sat, 14 Jan 2012 14:51:37 +0000 (15:51 +0100)]
eCryptfs: Report errors in writes to /dev/ecryptfs

Errors in writes to /dev/ecryptfs were being incorrectly reported by
returning 0 or the value of the original write count.

This patch clears up the return code assignment in error paths.

Signed-off-by: Tyler Hicks <>
5 years agoALSA: snd-usb-caiaq: initialize card pointer
Daniel Mack [Mon, 18 Jun 2012 19:16:31 +0000 (21:16 +0200)]
ALSA: snd-usb-caiaq: initialize card pointer

Fixes the following warning:

  CC [M]  sound/usb/caiaq/device.o
sound/usb/caiaq/device.c: In function ‘snd_probe’:
sound/usb/caiaq/device.c:500:16: warning: ‘card’ may be used
uninitialized in this function [-Wmaybe-uninitialized]

Signed-off-by: Daniel Mack <>
Signed-off-by: Takashi Iwai <>
5 years agocifs: silence compiler warnings showing up with gcc-4.7.0
Jeff Layton [Mon, 26 Mar 2012 13:55:29 +0000 (09:55 -0400)]
cifs: silence compiler warnings showing up with gcc-4.7.0

gcc-4.7.0 has started throwing these warnings when building cifs.ko.

  CC [M]  fs/cifs/cifssmb.o
fs/cifs/cifssmb.c: In function ‘CIFSSMBSetCIFSACL’:
fs/cifs/cifssmb.c:3905:9: warning: array subscript is above array bounds [-Warray-bounds]
fs/cifs/cifssmb.c: In function ‘CIFSSMBSetFileInfo’:
fs/cifs/cifssmb.c:5711:8: warning: array subscript is above array bounds [-Warray-bounds]
fs/cifs/cifssmb.c: In function ‘CIFSSMBUnixSetFileInfo’:
fs/cifs/cifssmb.c:6001:25: warning: array subscript is above array bounds [-Warray-bounds]

This patch cleans up the code a bit by using the offsetof macro instead
of the funky "&pSMB->hdr.Protocol" construct.

Signed-off-by: Jeff Layton <>
Signed-off-by: Steve French <>
5 years agoBluetooth: Remove unused hci_le_ltk_reply()
Syam Sidhardhan [Thu, 12 Apr 2012 15:03:17 +0000 (20:33 +0530)]
Bluetooth: Remove unused hci_le_ltk_reply()

In this API, we were using sizeof operator for an array
given as function argument, which is invalid.
However this API is not used anywhere.

Signed-off-by: Syam Sidhardhan <>
Signed-off-by: Gustavo Padovan <>
5 years agoslub: Get rid of the node field
Christoph Lameter [Wed, 9 May 2012 15:09:56 +0000 (10:09 -0500)]
slub: Get rid of the node field

The node field is always page_to_nid(c->page). So its rather easy to
replace. Note that there maybe slightly more overhead in various hot paths
due to the need to shift the bits from page->flags. However, that is mostly
compensated for by a smaller footprint of the kmem_cache_cpu structure (this
patch reduces that to 3 words per cache) which allows better caching.

Signed-off-by: Christoph Lameter <>
Signed-off-by: Pekka Enberg <>
5 years agoarch/tile: allow building Linux with transparent huge pages enabled
Chris Metcalf [Wed, 28 Mar 2012 17:59:18 +0000 (13:59 -0400)]
arch/tile: allow building Linux with transparent huge pages enabled

The change adds some infrastructure for managing tile pmd's more generally,
using pte_pmd() and pmd_pte() methods to translate pmd values to and
from ptes, since on TILEPro a pmd is really just a nested structure
holding a pgd (aka pte).  Several existing pmd methods are moved into
this framework, and a whole raft of additional pmd accessors are defined
that are used by the transparent hugepage framework.

The tile PTE now has a "client2" bit.  The bit is used to indicate a
transparent huge page is in the process of being split into subpages.

This change also fixes a generic bug where the return value of the
generic pmdp_splitting_flush() was incorrect.

Signed-off-by: Chris Metcalf <>
5 years agoARM: 8328/1: remove empty preprocessor #else branch
Uwe Kleine-König [Wed, 25 Mar 2015 10:44:14 +0000 (11:44 +0100)]
ARM: 8328/1: remove empty preprocessor #else branch

When the patch for e16343c47e42 (ARM: 8160/1: drop warning about
return_address not using unwind tables) was created there was still more
code in said branch. Probably this simplification was just missed during
conflict resolution when the patch was applied.

Signed-off-by: Uwe Kleine-König <>
Signed-off-by: Russell King <>
5 years agoARM: 8160/1: drop warning about return_address not using unwind tables
Uwe Kleine-König [Wed, 24 Sep 2014 07:51:57 +0000 (08:51 +0100)]
ARM: 8160/1: drop warning about return_address not using unwind tables

The warning was introduced in 2009 (commit 4bf1fa5a34aa ([ARM] 5613/1:
implement CALLER_ADDRESSx)). The only "problem" here is that
CALLER_ADDRESSx for x > 1 returns NULL which doesn't do much harm.

The drawback of implementing a fix (i.e. use unwind tables to implement CALLER_ADDRESSx) is that much of the unwinder code would need to be marked as not

Signed-off-by: Uwe Kleine-König <>
Signed-off-by: Russell King <>
5 years agoARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
Behan Webster [Wed, 24 Sep 2014 00:06:46 +0000 (01:06 +0100)]
ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h

With compilers which follow the C99 standard (like modern versions of gcc and
clang), "extern inline" does the wrong thing (emits code for an externally
linkable version of the inline function). In this case using static inline
and removing the NULL version of return_address in return_address.c does
the right thing.

Signed-off-by: Behan Webster <>
Reviewed-by: Mark Charlebois <>
Acked-by: Steven Rostedt <>
Signed-off-by: Russell King <>
5 years agoARM: 7676/1: fix a wrong value returned from CALLER_ADDRn
Keun-O Park [Mon, 18 Mar 2013 06:32:53 +0000 (07:32 +0100)]
ARM: 7676/1: fix a wrong value returned from CALLER_ADDRn

This makes return_address() return a correct value for CALLER_ADDRn.
To have a correct value from CALLER_ADDRn, we need to fix three points.

* The unwind_frame() does not update frame->lr but frame->pc for backtrace.
So frame->pc is meaningful for backtrace.

* data.level should be adjusted by adding 2 additional iteration levels.
With the current +1 level adjustment, the result of CALLER_ADDR1 will
be the same return address with CALLER_ADDR0.

* The initialization of data.addr to NULL is needed.
When unwind_fame() fails right after data.level reaches zero,
the routine returns data.addr which has uninitialized garbage value.

Signed-off-by: Sahara <>
Reviewed-by: Dave Martin <>
Signed-off-by: Russell King <>
5 years agosched, trivial: Initialize root cgroup's sibling list
Glauber Costa [Tue, 1 Nov 2011 21:19:07 +0000 (19:19 -0200)]
sched, trivial: Initialize root cgroup's sibling list

Even though there are no siblings, the list should be
initialized to not contain bogus values.

Signed-off-by: Glauber Costa <>
Acked-by: Paul Menage <>
Acked-by: Paul Turner <>
Signed-off-by: Peter Zijlstra <>
Signed-off-by: Ingo Molnar <>
5 years agoscripts: dtc: fix compile warnings
Felipe Balbi [Thu, 26 Jan 2012 11:20:07 +0000 (13:20 +0200)]
scripts: dtc: fix compile warnings

Fix following compile warnings:

scripts/dtc/flattree.c: In function ‘flat_read_mem_reserve’:
scripts/dtc/flattree.c:700:14: warning: variable ‘p’ set but not used

scripts/dtc/dtc.c: In function ‘main’:
scripts/dtc/dtc.c:104:17: warning: variable ‘check’ set but not used

Signed-off-by: Felipe Balbi <>
Signed-off-by: Michal Marek <>
5 years agomusb: adjust vbus workaround ulpi write after 3.2.76
Grazvydas Ignotas [Fri, 26 Feb 2016 23:59:45 +0000 (01:59 +0200)]
musb: adjust vbus workaround ulpi write after 3.2.76

3.2 stable commit fff91a21b merged 705e63d2b29c8bbf091119084544d353bda70393
which swapped reg/val order

5 years agoMerge branch 'stable-3.2' into pandora-3.2
Grazvydas Ignotas [Sun, 28 Feb 2016 01:51:23 +0000 (03:51 +0200)]
Merge branch 'stable-3.2' into pandora-3.2

5 years agoLinux 3.2.78 v3.2.78
Ben Hutchings [Sat, 27 Feb 2016 14:28:50 +0000 (14:28 +0000)]
Linux 3.2.78

5 years agosched: fix __sched_setscheduler() vs load balancing race
Mike Galbraith [Wed, 17 Feb 2016 03:02:59 +0000 (04:02 +0100)]
sched: fix __sched_setscheduler() vs load balancing race

__sched_setscheduler() may release rq->lock in pull_rt_task() as a task is
being changed rt -> fair class.  load balancing may sneak in, move the task
behind __sched_setscheduler()'s back, which explodes in switched_to_fair()
when the passed but no longer valid rq is used.  Tell can_migrate_task() to
say no if ->pi_lock is held.

@stable: Kernels that predate SCHED_DEADLINE can use this simple (and tested)
check in lieu of backport of the full 18 patch mainline treatment.

Signed-off-by: Mike Galbraith <>
[bwh: Backported to 3.2:
 - Adjust numbering in the comment
 - Adjust filename]
Signed-off-by: Ben Hutchings <>
Cc: Byungchul Park <>
Cc: Peter Zijlstra <>
Cc: Willy Tarreau <>
5 years agopipe: Fix buffer offset after partially failed read
Ben Hutchings [Sat, 13 Feb 2016 02:34:52 +0000 (02:34 +0000)]
pipe: Fix buffer offset after partially failed read

Quoting the RHEL advisory:

> It was found that the fix for CVE-2015-1805 incorrectly kept buffer
> offset and buffer length in sync on a failed atomic read, potentially
> resulting in a pipe buffer state corruption. A local, unprivileged user
> could use this flaw to crash the system or leak kernel memory to user
> space. (CVE-2016-0774, Moderate)

The same flawed fix was applied to stable branches from 2.6.32.y to
3.14.y inclusive, and I was able to reproduce the issue on 3.2.y.
We need to give pipe_iov_copy_to_user() a separate offset variable
and only update the buffer offset if it succeeds.

Signed-off-by: Ben Hutchings <>
5 years agoiw_cxgb3: Fix incorrectly returning error on success
Hariprasad S [Fri, 11 Dec 2015 08:29:17 +0000 (13:59 +0530)]
iw_cxgb3: Fix incorrectly returning error on success

commit 67f1aee6f45059fd6b0f5b0ecb2c97ad0451f6b3 upstream.

The cxgb3_*_send() functions return NET_XMIT_ values, which are
positive integers values. So don't treat positive return values
as an error.

Signed-off-by: Steve Wise <>
Signed-off-by: Hariprasad Shenai <>
Signed-off-by: Doug Ledford <>
Signed-off-by: Ben Hutchings <>
5 years agopipe: limit the per-user amount of pages allocated in pipes
Willy Tarreau [Mon, 18 Jan 2016 15:36:09 +0000 (16:36 +0100)]
pipe: limit the per-user amount of pages allocated in pipes

commit 759c01142a5d0f364a462346168a56de28a80f52 upstream.

On no-so-small systems, it is possible for a single process to cause an
OOM condition by filling large pipes with data that are never read. A
typical process filling 4000 pipes with 1 MB of data will use 4 GB of
memory. On small systems it may be tricky to set the pipe max size to
prevent this from happening.

This patch makes it possible to enforce a per-user soft limit above
which new pipes will be limited to a single page, effectively limiting
them to 4 kB each, as well as a hard limit above which no new pipes may
be created for this user. This has the effect of protecting the system
against memory abuse without hurting other users, and still allowing
pipes to work correctly though with less data at once.

The limit are controlled by two new sysctls : pipe-user-pages-soft, and
pipe-user-pages-hard. Both may be disabled by setting them to zero. The
default soft limit allows the default number of FDs per process (1024)
to create pipes of the default size (64kB), thus reaching a limit of 64MB
before starting to create only smaller pipes. With 256 processes limited
to 1024 FDs each, this results in 1024*64kB + (256*1024 - 1024) * 4kB =
1084 MB of memory allocated for a user. The hard limit is disabled by
default to avoid breaking existing applications that make intensive use
of pipes (eg: for splicing).

Reported-by: Tetsuo Handa <>
Mitigates: CVE-2013-4312 (Linux 2.0+)
Suggested-by: Linus Torvalds <>
Signed-off-by: Willy Tarreau <>
Signed-off-by: Al Viro <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
5 years agounix: correctly track in-flight fds in sending process user_struct
Hannes Frederic Sowa [Wed, 3 Feb 2016 01:11:03 +0000 (02:11 +0100)]
unix: correctly track in-flight fds in sending process user_struct

commit 415e3d3e90ce9e18727e8843ae343eda5a58fad6 upstream.

The commit referenced in the Fixes tag incorrectly accounted the number
of in-flight fds over a unix domain socket to the original opener
of the file-descriptor. This allows another process to arbitrary
deplete the original file-openers resource limit for the maximum of
open files. Instead the sending processes and its struct cred should
be credited.

To do so, we add a reference counted struct user_struct pointer to the
scm_fp_list and use it to account for the number of inflight unix fds.

Fixes: 712f4aad406bb1 ("unix: properly account for FDs passed over unix sockets")
Reported-by: David Herrmann <>
Cc: David Herrmann <>
Cc: Willy Tarreau <>
Cc: Linus Torvalds <>
Suggested-by: Linus Torvalds <>
Signed-off-by: Hannes Frederic Sowa <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
5 years agounix: properly account for FDs passed over unix sockets
willy tarreau [Sun, 10 Jan 2016 06:54:56 +0000 (07:54 +0100)]
unix: properly account for FDs passed over unix sockets

commit 712f4aad406bb1ed67f3f98d04c044191f0ff593 upstream.

It is possible for a process to allocate and accumulate far more FDs than
the process' limit by sending them over a unix socket then closing them
to keep the process' fd count low.

This change addresses this problem by keeping track of the number of FDs
in flight per user and preventing non-privileged processes from having
more FDs in flight than their configured FD limit.

Reported-by: Tetsuo Handa <>
Mitigates: CVE-2013-4312 (Linux 2.0+)
Suggested-by: Linus Torvalds <>
Acked-by: Hannes Frederic Sowa <>
Signed-off-by: Willy Tarreau <>
Signed-off-by: David S. Miller <>
[carnil: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <>
5 years agoALSA: usb-audio: avoid freeing umidi object twice
Andrey Konovalov [Sat, 13 Feb 2016 08:08:06 +0000 (11:08 +0300)]
ALSA: usb-audio: avoid freeing umidi object twice

commit 07d86ca93db7e5cdf4743564d98292042ec21af7 upstream.

The 'umidi' object will be free'd on the error path by snd_usbmidi_free()
when tearing down the rawmidi interface. So we shouldn't try to free it
in snd_usbmidi_create() after having registered the rawmidi interface.

Found by KASAN.

Signed-off-by: Andrey Konovalov <>
Acked-by: Clemens Ladisch <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agobtrfs: properly set the termination value of ctx->pos in readdir
David Sterba [Fri, 13 Nov 2015 12:44:28 +0000 (13:44 +0100)]
btrfs: properly set the termination value of ctx->pos in readdir

commit bc4ef7592f657ae81b017207a1098817126ad4cb upstream.

The value of ctx->pos in the last readdir call is supposed to be set to
INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a
larger value, then it's LLONG_MAX.

There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++"
overflows (, on a
64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before
the increment.

We can get to that situation like that:

* emit all regular readdir entries
* still in the same call to readdir, bump the last pos to INT_MAX
* next call to readdir will not emit any entries, but will reach the
  bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX

Normally this is not a problem, but if we call readdir again, we'll find
'pos' set to LLONG_MAX and the unconditional increment will overflow.

The report from Victor at
( with debugging
print shows that pattern:

 Overflow: e
 Overflow: 7fffffff
 Overflow: 7fffffffffffffff
 PAX: size overflow detected in function btrfs_real_readdir
   fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0;
   context: dir_context;
 CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1
 Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015
  ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48
  ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78
  ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8
 Call Trace:
  [<ffffffff81742f0f>] dump_stack+0x4c/0x7f
  [<ffffffff811cb706>] report_size_overflow+0x36/0x40
  [<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0
  [<ffffffff811dafc8>] iterate_dir+0xa8/0x150
  [<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70
  [<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0
 Overflow: 1a
  [<ffffffff811db070>] ? iterate_dir+0x150/0x150
  [<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83

The jump from 7fffffff to 7fffffffffffffff happens when new dir entries
are not yet synced and are processed from the delayed list. Then the code
could go to the bump section again even though it might not emit any new
dir entries from the delayed list.

The fix avoids entering the "bump" section again once we've finished
emitting the entries, both for synced and delayed entries.

Reported-by: Victor <>
Signed-off-by: David Sterba <>
Tested-by: Holger Hoffstätte <>
Signed-off-by: Chris Mason <>
[bwh: Backported to 3.2:
 - s/ctx->pos/filp->f_pos/
 - Adjust context]
Signed-off-by: Ben Hutchings <>
5 years agoARM: 8519/1: ICST: try other dividends than 1
Linus Walleij [Wed, 10 Feb 2016 08:25:17 +0000 (09:25 +0100)]
ARM: 8519/1: ICST: try other dividends than 1

commit e972c37459c813190461dabfeaac228e00aae259 upstream.

Since the dawn of time the ICST code has only supported divide
by one or hang in an eternal loop. Luckily we were always dividing
by one because the reference frequency for the systems using
the ICSTs is 24MHz and the [min,max] values for the PLL input
if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop
will always terminate immediately without assigning any divisor
for the reference frequency.

But for the code to make sense, let's insert the missing i++

Reported-by: David Binderman <>
Signed-off-by: Linus Walleij <>
Signed-off-by: Russell King <>
Signed-off-by: Ben Hutchings <>
5 years agoahci: Intel DNV device IDs SATA
Alexandra Yates [Fri, 5 Feb 2016 23:27:49 +0000 (15:27 -0800)]
ahci: Intel DNV device IDs SATA

commit 342decff2b846b46fa61eb5ee40986fab79a9a32 upstream.

Adding Intel codename DNV platform device IDs for SATA.

Signed-off-by: Alexandra Yates <>
Signed-off-by: Tejun Heo <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: timer: Fix race at concurrent reads
Takashi Iwai [Mon, 8 Feb 2016 16:26:58 +0000 (17:26 +0100)]
ALSA: timer: Fix race at concurrent reads

commit 4dff5c7b7093b19c19d3a100f8a3ad87cb7cd9e7 upstream.

snd_timer_user_read() has a potential race among parallel reads, as
qhead and qused are updated outside the critical section due to
copy_to_user() calls.  Move them into the critical section, and also
sanitize the relevant code a bit.

Signed-off-by: Takashi Iwai <>
[bwh: Backported to 3.2: there's no check for tu->connected to fix up]
Signed-off-by: Ben Hutchings <>
5 years agoALSA: timer: Fix race between stop and interrupt
Takashi Iwai [Tue, 9 Feb 2016 11:02:32 +0000 (12:02 +0100)]
ALSA: timer: Fix race between stop and interrupt

commit ed8b1d6d2c741ab26d60d499d7fbb7ac801f0f51 upstream.

A slave timer element also unlinks at snd_timer_stop() but it takes
only slave_active_lock.  When a slave is assigned to a master,
however, this may become a race against the master's interrupt
handling, eventually resulting in a list corruption.  The actual bug
could be seen with a syzkaller fuzzer test case in BugLink below.

As a fix, we need to take timeri->timer->lock when timer isn't NULL,
i.e. assigned to a master, while the assignment to a master itself is
protected by slave_active_lock.

Signed-off-by: Takashi Iwai <>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <>
5 years agosctp: translate network order to host order when users get a hmacid
Xin Long [Wed, 3 Feb 2016 15:33:30 +0000 (23:33 +0800)]
sctp: translate network order to host order when users get a hmacid

commit 7a84bd46647ff181eb2659fdc99590e6f16e501d upstream.

Commit ed5a377d87dc ("sctp: translate host order to network order when
setting a hmacid") corrected the hmacid byte-order when setting a hmacid.
but the same issue also exists on getting a hmacid.

We fix it by changing hmacids to host order when users get them with

Fixes: Commit ed5a377d87dc ("sctp: translate host order to network order when setting a hmacid")
Signed-off-by: Xin Long <>
Acked-by: Marcelo Ricardo Leitner <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
5 years agoARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
Linus Walleij [Mon, 8 Feb 2016 08:14:37 +0000 (09:14 +0100)]
ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()

commit 5070fb14a0154f075c8b418e5bc58a620ae85a45 upstream.

When trying to set the ICST 307 clock to 25174000 Hz I ran into
this arithmetic error: the icst_hz_to_vco() correctly figure out
DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of
25174000 Hz out of the VCO. (I replicated the icst_hz() function
in a spreadsheet to verify this.)

However, when I called icst_hz() on these VCO settings it would
instead return 4122709 Hz. This causes an error in the common
clock driver for ICST as the common clock framework will call
.round_rate() on the clock which will utilize icst_hz_to_vco()
followed by icst_hz() suggesting the erroneous frequency, and
then the clock gets set to this.

The error did not manifest in the old clock framework since
this high frequency was only used by the CLCD, which calls
clk_set_rate() without first calling clk_round_rate() and since
the old clock framework would not call clk_round_rate() before
setting the frequency, the correct values propagated into
the VCO.

After some experimenting I figured out that it was due to a simple
arithmetic overflow: the divisor for 24Mhz reference frequency
as reference becomes 24000000*2*(99+8)=0x132212400 and the "1"
in bit 32 overflows and is lost.

But introducing an explicit 64-by-32 bit do_div() and casting
the divisor into (u64) we get the right frequency back, and the
right frequency gets set.

Tested on the ARM Versatile.

Cc: Pawel Moll <>
Signed-off-by: Linus Walleij <>
Signed-off-by: Russell King <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: timer: Fix wrong instance passed to slave callbacks
Takashi Iwai [Mon, 8 Feb 2016 16:36:25 +0000 (17:36 +0100)]
ALSA: timer: Fix wrong instance passed to slave callbacks

commit 117159f0b9d392fb433a7871426fad50317f06f7 upstream.

In snd_timer_notify1(), the wrong timer instance was passed for slave
ccallback function.  This leads to the access to the wrong data when
an incompatible master is handled (e.g. the master is the sequencer
timer and the slave is a user timer), as spotted by syzkaller fuzzer.

This patch fixes that wrong assignment.

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: dummy: Implement timer backend switching more safely
Takashi Iwai [Tue, 2 Feb 2016 14:27:36 +0000 (15:27 +0100)]
ALSA: dummy: Implement timer backend switching more safely

commit ddce57a6f0a2d8d1bfacfa77f06043bc760403c2 upstream.

Currently the selected timer backend is referred at any moment from
the running PCM callbacks.  When the backend is switched, it's
possible to lead to inconsistency from the running backend.  This was
pointed by syzkaller fuzzer, and the commit [7ee96216c31a: ALSA:
dummy: Disable switching timer backend via sysfs] disabled the dynamic
switching for avoiding the crash.

This patch improves the handling of timer backend switching.  It keeps
the reference to the selected backend during the whole operation of an
opened stream so that it won't be changed by other streams.

Together with this change, the hrtimer parameter is reenabled as
writable now.

NOTE: this patch also turned out to fix the still remaining race.
Namely, ops was still replaced dynamically at dummy_pcm_open:

  static int dummy_pcm_open(struct snd_pcm_substream *substream)
          dummy->timer_ops = &dummy_systimer_ops;
          if (hrtimer)
                  dummy->timer_ops = &dummy_hrtimer_ops;

Since dummy->timer_ops is common among all streams, and when the
replacement happens during accesses of other streams, it may lead to a
crash.  This was actually triggered by syzkaller fuzzer and KASAN.

This patch rewrites the code not to use the ops shared by all streams
any longer, too.

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
5 years agoklist: fix starting point removed bug in klist iterators
James Bottomley [Wed, 13 Jan 2016 16:10:31 +0000 (08:10 -0800)]
klist: fix starting point removed bug in klist iterators

commit 00cd29b799e3449f0c68b1cc77cd4a5f95b42d17 upstream.

The starting node for a klist iteration is often passed in from
somewhere way above the klist infrastructure, meaning there's no
guarantee the node is still on the list.  We've seen this in SCSI where
we use bus_find_device() to iterate through a list of devices.  In the
face of heavy hotplug activity, the last device returned by
bus_find_device() can be removed before the next call.  This leads to

Dec  3 13:22:02 localhost kernel: WARNING: CPU: 2 PID: 28073 at include/linux/kref.h:47 klist_iter_init_node+0x3d/0x50()
Dec  3 13:22:02 localhost kernel: Modules linked in: scsi_debug x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel joydev iTCO_wdt dcdbas ipmi_devintf acpi_power_meter iTCO_vendor_support ipmi_si imsghandler pcspkr wmi acpi_cpufreq tpm_tis tpm shpchp lpc_ich mfd_core nfsd nfs_acl lockd grace sunrpc tg3 ptp pps_core
Dec  3 13:22:02 localhost kernel: CPU: 2 PID: 28073 Comm: cat Not tainted 4.4.0-rc1+ #2
Dec  3 13:22:02 localhost kernel: Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013
Dec  3 13:22:02 localhost kernel: ffffffff81a20e77 ffff880613acfd18 ffffffff81321eef 0000000000000000
Dec  3 13:22:02 localhost kernel: ffff880613acfd50 ffffffff8107ca52 ffff88061176b198 0000000000000000
Dec  3 13:22:02 localhost kernel: ffffffff814542b0 ffff880610cfb100 ffff88061176b198 ffff880613acfd60
Dec  3 13:22:02 localhost kernel: Call Trace:
Dec  3 13:22:02 localhost kernel: [<ffffffff81321eef>] dump_stack+0x44/0x55
Dec  3 13:22:02 localhost kernel: [<ffffffff8107ca52>] warn_slowpath_common+0x82/0xc0
Dec  3 13:22:02 localhost kernel: [<ffffffff814542b0>] ? proc_scsi_show+0x20/0x20
Dec  3 13:22:02 localhost kernel: [<ffffffff8107cb4a>] warn_slowpath_null+0x1a/0x20
Dec  3 13:22:02 localhost kernel: [<ffffffff8167225d>] klist_iter_init_node+0x3d/0x50
Dec  3 13:22:02 localhost kernel: [<ffffffff81421d41>] bus_find_device+0x51/0xb0
Dec  3 13:22:02 localhost kernel: [<ffffffff814545ad>] scsi_seq_next+0x2d/0x40

And an eventual crash. It can actually occur in any hotplug system
which has a device finder and a starting device.

We can fix this globally by making sure the starting node for
klist_iter_init_node() is actually a member of the list before using it
(and by starting from the beginning if it isn't).

Reported-by: Ewan D. Milne <>
Tested-by: Ewan D. Milne <>
Signed-off-by: James Bottomley <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
5 years agocrypto: algif_skcipher - Do not dereference ctx without socket lock
Herbert Xu [Wed, 3 Feb 2016 13:39:26 +0000 (21:39 +0800)]
crypto: algif_skcipher - Do not dereference ctx without socket lock

commit 6454c2b83f719057069777132b13949e4c6b6350 upstream.

Any access to non-constant bits of the private context must be
done under the socket lock, in particular, this includes ctx->req.

This patch moves such accesses under the lock, and fetches the
tfm from the parent socket which is guaranteed to be constant,
rather than from ctx->req.

Signed-off-by: Herbert Xu <>
[bwh: Backported to 3.2:
 - Drop changes to skcipher_recvmsg_async
 - s/skcipher/ablkcipher/ in many places
 - s/skc->skcipher/skc->base/]
Signed-off-by: Ben Hutchings <>
5 years agocrypto: user - lock crypto_alg_list on alg dump
Mathias Krause [Mon, 1 Feb 2016 13:27:30 +0000 (14:27 +0100)]
crypto: user - lock crypto_alg_list on alg dump

commit 63e41ebc6630f39422d87f8a4bade1e793f37a01 upstream.

We miss to take the crypto_alg_sem semaphore when traversing the
crypto_alg_list for CRYPTO_MSG_GETALG dumps. This allows a race with
crypto_unregister_alg() removing algorithms from the list while we're
still traversing it, thereby leading to a use-after-free as show below:

[ 3482.071639] general protection fault: 0000 [#1] SMP
[ 3482.075639] Modules linked in: aes_x86_64 glue_helper lrw ablk_helper cryptd gf128mul ipv6 pcspkr serio_raw virtio_net microcode virtio_pci virtio_ring virtio sr_mod cdrom [last unloaded: aesni_intel]
[ 3482.075639] CPU: 1 PID: 11065 Comm: crconf Not tainted 4.3.4-grsec+ #126
[ 3482.075639] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 3482.075639] task: ffff88001cd41a40 ti: ffff88001cd422c8 task.ti: ffff88001cd422c8
[ 3482.075639] RIP: 0010:[<ffffffff93722bd3>]  [<ffffffff93722bd3>] strncpy+0x13/0x30
[ 3482.075639] RSP: 0018:ffff88001f713b60  EFLAGS: 00010202
[ 3482.075639] RAX: ffff88001f6c4430 RBX: ffff88001f6c43a0 RCX: ffff88001f6c4430
[ 3482.075639] RDX: 0000000000000040 RSI: fefefefefefeff16 RDI: ffff88001f6c4430
[ 3482.075639] RBP: ffff88001f713b60 R08: ffff88001f6c4470 R09: ffff88001f6c4480
[ 3482.075639] R10: 0000000000000002 R11: 0000000000000246 R12: ffff88001ce2aa28
[ 3482.075639] R13: ffff880000093700 R14: ffff88001f5e4bf8 R15: 0000000000003b20
[ 3482.075639] FS:  0000033826fa2700(0000) GS:ffff88001e900000(0000) knlGS:0000000000000000
[ 3482.075639] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3482.075639] CR2: ffffffffff600400 CR3: 00000000139ec000 CR4: 00000000001606f0
[ 3482.075639] Stack:
[ 3482.075639]  ffff88001f713bd8 ffffffff936ccd00 ffff88001e5c4200 ffff880000093700
[ 3482.075639]  ffff88001f713bd0 ffffffff938ef4bf 0000000000000000 0000000000003b20
[ 3482.075639]  ffff88001f5e4bf8 ffff88001f5e4848 0000000000000000 0000000000003b20
[ 3482.075639] Call Trace:
[ 3482.075639]  [<ffffffff936ccd00>] crypto_report_alg+0xc0/0x3e0
[ 3482.075639]  [<ffffffff938ef4bf>] ? __alloc_skb+0x16f/0x300
[ 3482.075639]  [<ffffffff936cd08a>] crypto_dump_report+0x6a/0x90
[ 3482.075639]  [<ffffffff93935707>] netlink_dump+0x147/0x2e0
[ 3482.075639]  [<ffffffff93935f99>] __netlink_dump_start+0x159/0x190
[ 3482.075639]  [<ffffffff936ccb13>] crypto_user_rcv_msg+0xc3/0x130
[ 3482.075639]  [<ffffffff936cd020>] ? crypto_report_alg+0x3e0/0x3e0
[ 3482.075639]  [<ffffffff936cc4b0>] ? alg_test_crc32c+0x120/0x120
[ 3482.075639]  [<ffffffff93933145>] ? __netlink_lookup+0xd5/0x120
[ 3482.075639]  [<ffffffff936cca50>] ? crypto_add_alg+0x1d0/0x1d0
[ 3482.075639]  [<ffffffff93938141>] netlink_rcv_skb+0xe1/0x130
[ 3482.075639]  [<ffffffff936cc4f8>] crypto_netlink_rcv+0x28/0x40
[ 3482.075639]  [<ffffffff939375a8>] netlink_unicast+0x108/0x180
[ 3482.075639]  [<ffffffff93937c21>] netlink_sendmsg+0x541/0x770
[ 3482.075639]  [<ffffffff938e31e1>] sock_sendmsg+0x21/0x40
[ 3482.075639]  [<ffffffff938e4763>] SyS_sendto+0xf3/0x130
[ 3482.075639]  [<ffffffff93444203>] ? bad_area_nosemaphore+0x13/0x20
[ 3482.075639]  [<ffffffff93444470>] ? __do_page_fault+0x80/0x3a0
[ 3482.075639]  [<ffffffff939d80cb>] entry_SYSCALL_64_fastpath+0x12/0x6e
[ 3482.075639] Code: 88 4a ff 75 ed 5d 48 0f ba 2c 24 3f c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 85 d2 48 89 f8 48 89 f9 4c 8d 04 17 48 89 e5 74 15 <0f> b6 16 80 fa 01 88 11 48 83 de ff 48 83 c1 01 4c 39 c1 75 eb
[ 3482.075639] RIP  [<ffffffff93722bd3>] strncpy+0x13/0x30

To trigger the race run the following loops simultaneously for a while:
  $ while : ; do modprobe aesni-intel; rmmod aesni-intel; done
  $ while : ; do crconf show all > /dev/null; done

Fix the race by taking the crypto_alg_sem read lock, thereby preventing
crypto_unregister_alg() from modifying the algorithm list during the

This bug has been detected by the PaX memory sanitize feature.

Signed-off-by: Mathias Krause <>
Cc: Steffen Klassert <>
Cc: PaX Team <>
Signed-off-by: Herbert Xu <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
5 years agoocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
xuejiufei [Fri, 5 Feb 2016 23:36:47 +0000 (15:36 -0800)]
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup

commit c95a51807b730e4681e2ecbdfd669ca52601959e upstream.

When recovery master down, dlm_do_local_recovery_cleanup() only remove
the $RECOVERY lock owned by dead node, but do not clear the refmap bit.
Which will make umount thread falling in dead loop migrating $RECOVERY
to the dead node.

Signed-off-by: xuejiufei <>
Reviewed-by: Joseph Qi <>
Cc: Mark Fasheh <>
Cc: Joel Becker <>
Cc: Junxiao Bi <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
5 years agomm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
Tetsuo Handa [Fri, 5 Feb 2016 23:36:30 +0000 (15:36 -0800)]
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress

commit 564e81a57f9788b1475127012e0fd44e9049e342 upstream.

Jan Stancek has reported that system occasionally hanging after "oom01"
testcase from LTP triggers OOM.  Guessing from a result that there is a
kworker thread doing memory allocation and the values between "Node 0
Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not
up-to-date for some reason.

According to commit 373ccbe59270 ("mm, vmstat: allow WQ concurrency to
discover memory reclaim doesn't make any progress"), it meant to force
the kworker thread to take a short sleep, but it by error used
schedule_timeout(1).  We missed that schedule_timeout() in state
TASK_RUNNING doesn't do anything.

Fix it by using schedule_timeout_uninterruptible(1) which forces the
kworker thread to take a short sleep in order to make sure that vmstat
is up-to-date.

Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Signed-off-by: Tetsuo Handa <>
Reported-by: Jan Stancek <>
Acked-by: Michal Hocko <>
Cc: Tejun Heo <>
Cc: Cristopher Lameter <>
Cc: Joonsoo Kim <>
Cc: Arkadiusz Miskiewicz <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
5 years agoscsi_dh_rdac: always retry MODE SELECT on command lock violation
Hannes Reinecke [Fri, 22 Jan 2016 14:42:41 +0000 (15:42 +0100)]
scsi_dh_rdac: always retry MODE SELECT on command lock violation

commit d2d06d4fe0f2cc2df9b17fefec96e6e1a1271d91 upstream.

If MODE SELECT returns with sense '05/91/36' (command lock violation)
it should always be retried without counting the number of retries.
During an HBA upgrade or similar circumstances one might see a flood
of MODE SELECT command from various HBAs, which will easily trigger
the sense code and exceed the retry count.

Signed-off-by: Hannes Reinecke <>
Reviewed-by: Johannes Thumshirn <>
Signed-off-by: Martin K. Petersen <>
Signed-off-by: Ben Hutchings <>
5 years agosaa7134-alsa: Only frees registered sound cards
Mauro Carvalho Chehab [Thu, 4 Feb 2016 17:59:43 +0000 (15:59 -0200)]
saa7134-alsa: Only frees registered sound cards

commit ac75fe5d8fe4a0bf063be18fb29684405279e79e upstream.

That prevents this bug:
[ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at 0000000000000540
[ 2382.270013] IP: [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd]
[ 2382.270013] PGD 0
[ 2382.270013] Oops: 0002 [#1] SMP
[ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops]
[ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ #4
[ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012  05/14/2008
[ 2382.270013] task: ffff880039c38000 ti: ffff88003c764000 task.ti: ffff88003c764000
[ 2382.270013] RIP: 0010:[<ffffffffa01fe616>]  [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd]
[ 2382.270013] RSP: 0018:ffff88003c767ea0  EFLAGS: 00010286
[ 2382.270013] RAX: ffff88003c767eb8 RBX: 0000000000000000 RCX: 0000000000006260
[ 2382.270013] RDX: ffffffffa020a060 RSI: ffffffffa0206de1 RDI: ffff88003c767eb0
[ 2382.270013] RBP: ffff88003c767ed8 R08: 0000000000019960 R09: ffffffff811a5412
[ 2382.270013] R10: ffffea0000d7c200 R11: 0000000000000000 R12: ffff88003c767ea8
[ 2382.270013] R13: 00007ffe760617f7 R14: 0000000000000000 R15: 0000557625d7f1e0
[ 2382.270013] FS:  00007f80bb1c0700(0000) GS:ffff88003f400000(0000) knlGS:0000000000000000
[ 2382.270013] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2382.270013] CR2: 0000000000000540 CR3: 000000003c00f000 CR4: 00000000000006f0
[ 2382.270013] Stack:
[ 2382.270013]  000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8
[ 2382.270013]  ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0
[ 2382.270013]  ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c
[ 2382.270013] Call Trace:
[ 2382.270013]  [<ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa]
[ 2382.270013]  [<ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0
[ 2382.270013]  [<ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d
[ 2382.270013] RIP  [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd]
[ 2382.270013]  RSP <ffff88003c767ea0>
[ 2382.270013] CR2: 0000000000000540

Signed-off-by: Mauro Carvalho Chehab <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
5 years agoALSA: timer: Fix leftover link at closing
Takashi Iwai [Thu, 4 Feb 2016 16:06:13 +0000 (17:06 +0100)]
ALSA: timer: Fix leftover link at closing

commit 094fd3be87b0f102589e2d5c3fa5d06b7e20496d upstream.

In ALSA timer core, the active timer instance is managed in
active_list linked list.  Each element is added / removed dynamically
at timer start, stop and in timer interrupt.  The problem is that
snd_timer_interrupt() has a thinko and leaves the element in
active_list when it's the last opened element.  This eventually leads
to list corruption or use-after-free error.

This hasn't been revealed because we used to delete the list forcibly
in snd_timer_stop() in the past.  However, the recent fix avoids the
double-stop behavior (in commit [f784beb75ce8: ALSA: timer: Fix link
corruption due to double start or stop]), and this leak hits reality.

This patch fixes the link management in snd_timer_interrupt().  Now it
simply unlinks no matter which stream is.

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agotda1004x: only update the frontend properties if locked
Mauro Carvalho Chehab [Wed, 3 Feb 2016 19:33:48 +0000 (17:33 -0200)]
tda1004x: only update the frontend properties if locked

commit e8beb02343e7582980c6705816cd957cf4f74c7a upstream.

The tda1004x was updating the properties cache before locking.
If the device is not locked, the data at the registers are just
random values with no real meaning.

This caused the driver to fail with libdvbv5, as such library
calls GET_PROPERTY from time to time, in order to return the
DVB stats.

Tested with a saa7134 card 78:
ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862

Signed-off-by: Mauro Carvalho Chehab <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
5 years agoxhci: Fix list corruption in urb dequeue at host removal
Mathias Nyman [Tue, 26 Jan 2016 15:50:12 +0000 (17:50 +0200)]
xhci: Fix list corruption in urb dequeue at host removal

commit 5c82171167adb8e4ac77b91a42cd49fb211a81a0 upstream.

xhci driver frees data for all devices, both usb2 and and usb3 the
first time usb_remove_hcd() is called, including td_list and and xhci_ring

When usb_remove_hcd() is called a second time for the second xhci bus it
will try to dequeue all pending urbs, and touches td_list which is already
freed for that endpoint.

Reported-by: Joe Lawrence <>
Tested-by: Joe Lawrence <>
Signed-off-by: Mathias Nyman <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
5 years agousb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
Lu Baolu [Tue, 26 Jan 2016 15:50:08 +0000 (17:50 +0200)]
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms

commit ccc04afb72cddbdf7c0e1c17e92886405a71b754 upstream.

Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well.

Signed-off-by: Lu Baolu <>
Signed-off-by: Mathias Nyman <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
5 years agoRevert "xhci: don't finish a TD if we get a short-transfer event mid TD"
Mathias Nyman [Tue, 26 Jan 2016 15:50:04 +0000 (17:50 +0200)]
Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"

commit a6835090716a85f2297668ba593bd00e1051e662 upstream.

This reverts commit e210c422b6fd ("xhci: don't finish a TD if we get a
short transfer event mid TD")

Turns out that most host controllers do not follow the xHCI specs and never
send the second event for the last TRB in the TD if there was a short event

Returning the URB directly after the first short-transfer event is far
better than never returning the URB. (class drivers usually timeout
after 30sec). For the hosts that do send the second event we will go
back to treating it as misplaced event and print an error message for it.

The origial patch was sent to stable kernels and needs to be reverted from
there as well

Signed-off-by: Mathias Nyman <>
Signed-off-by: Greg Kroah-Hartman <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
5 years agoALSA: seq: Fix lockdep warnings due to double mutex locks
Takashi Iwai [Wed, 3 Feb 2016 07:32:44 +0000 (08:32 +0100)]
ALSA: seq: Fix lockdep warnings due to double mutex locks

commit 7f0973e973cd74aa40747c9d38844560cd184ee8 upstream.

The port subscription code uses double mutex locks for source and
destination ports, and this may become racy once when wrongly set up.
It leads to lockdep warning splat, typically triggered by fuzzer like
syzkaller, although the actual deadlock hasn't been seen, so far.

This patch simplifies the handling by reducing to two single locks, so
that no lockdep warning will be trigger any longer.

By splitting to two actions, a still-in-progress element shall be
added in one list while handling another.  For ignoring this element,
a new check is added in deliver_to_subscribers().

Along with it, the code to add/remove the subscribers list element was
cleaned up and refactored.

Reported-by: Dmitry Vyukov <>
Tested-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: rawmidi: Fix race at copying & updating the position
Takashi Iwai [Wed, 3 Feb 2016 13:41:22 +0000 (14:41 +0100)]
ALSA: rawmidi: Fix race at copying & updating the position

commit 81f577542af15640cbcb6ef68baa4caa610cbbfc upstream.

The rawmidi read and write functions manage runtime stream status
such as runtime->appl_ptr and runtime->avail.  These point where to
copy the new data and how many bytes have been copied (or to be
read).  The problem is that rawmidi read/write call copy_from_user()
or copy_to_user(), and the runtime spinlock is temporarily unlocked
and relocked while copying user-space.  Since the current code
advances and updates the runtime status after the spin unlock/relock,
the copy and the update may be asynchronous, and eventually
runtime->avail might go to a negative value when many concurrent
accesses are done.  This may lead to memory corruption in the end.

For fixing this race, in this patch, the status update code is
performed in the same lock before the temporary unlock.  Also, the
spinlock is now taken more widely in snd_rawmidi_kernel_read1() for
protecting more properly during the whole operation.

Reported-by: Dmitry Vyukov <>
Tested-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: rawmidi: Make snd_rawmidi_transmit() race-free
Takashi Iwai [Sun, 31 Jan 2016 10:57:41 +0000 (11:57 +0100)]
ALSA: rawmidi: Make snd_rawmidi_transmit() race-free

commit 06ab30034ed9c200a570ab13c017bde248ddb2a6 upstream.

A kernel WARNING in snd_rawmidi_transmit_ack() is triggered by
syzkaller fuzzer:
  WARNING: CPU: 1 PID: 20739 at sound/core/rawmidi.c:1136
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff82999e2d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50
 [<ffffffff81352089>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482
 [<ffffffff813522b9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515
 [<ffffffff84f80bd5>] snd_rawmidi_transmit_ack+0x275/0x400 sound/core/rawmidi.c:1136
 [<ffffffff84fdb3c1>] snd_virmidi_output_trigger+0x4b1/0x5a0 sound/core/seq/seq_virmidi.c:163
 [<     inline     >] snd_rawmidi_output_trigger sound/core/rawmidi.c:150
 [<ffffffff84f87ed9>] snd_rawmidi_kernel_write1+0x549/0x780 sound/core/rawmidi.c:1223
 [<ffffffff84f89fd3>] snd_rawmidi_write+0x543/0xb30 sound/core/rawmidi.c:1273
 [<ffffffff817b0323>] __vfs_write+0x113/0x480 fs/read_write.c:528
 [<ffffffff817b1db7>] vfs_write+0x167/0x4a0 fs/read_write.c:577
 [<     inline     >] SYSC_write fs/read_write.c:624
 [<ffffffff817b50a1>] SyS_write+0x111/0x220 fs/read_write.c:616
 [<ffffffff86336c36>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185

Also a similar warning is found but in another path:
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff82be2c0d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50
 [<ffffffff81355139>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482
 [<ffffffff81355369>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515
 [<ffffffff8527e69a>] rawmidi_transmit_ack+0x24a/0x3b0 sound/core/rawmidi.c:1133
 [<ffffffff8527e851>] snd_rawmidi_transmit_ack+0x51/0x80 sound/core/rawmidi.c:1163
 [<ffffffff852d9046>] snd_virmidi_output_trigger+0x2b6/0x570 sound/core/seq/seq_virmidi.c:185
 [<     inline     >] snd_rawmidi_output_trigger sound/core/rawmidi.c:150
 [<ffffffff85285a0b>] snd_rawmidi_kernel_write1+0x4bb/0x760 sound/core/rawmidi.c:1252
 [<ffffffff85287b73>] snd_rawmidi_write+0x543/0xb30 sound/core/rawmidi.c:1302
 [<ffffffff817ba5f3>] __vfs_write+0x113/0x480 fs/read_write.c:528
 [<ffffffff817bc087>] vfs_write+0x167/0x4a0 fs/read_write.c:577
 [<     inline     >] SYSC_write fs/read_write.c:624
 [<ffffffff817bf371>] SyS_write+0x111/0x220 fs/read_write.c:616
 [<ffffffff86660276>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185

In the former case, the reason is that virmidi has an open code
calling snd_rawmidi_transmit_ack() with the value calculated outside
the spinlock.   We may use snd_rawmidi_transmit() in a loop just for
consuming the input data, but even there, there is a race between
snd_rawmidi_transmit_peek() and snd_rawmidi_tranmit_ack().

Similarly in the latter case, it calls snd_rawmidi_transmit_peek() and
snd_rawmidi_tranmit_ack() separately without protection, so they are
racy as well.

The patch tries to address these issues by the following ways:
- Introduce the unlocked versions of snd_rawmidi_transmit_peek() and
  snd_rawmidi_transmit_ack() to be called inside the explicit lock.
- Rewrite snd_rawmidi_transmit() to be race-free (the former case).
- Make the split calls (the latter case) protected in the rawmidi spin

Reported-by: Dmitry Vyukov <>
Tested-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
5 years agolibata: fix sff host state machine locking while polling
Tejun Heo [Mon, 1 Feb 2016 16:33:21 +0000 (11:33 -0500)]
libata: fix sff host state machine locking while polling

commit 8eee1d3ed5b6fc8e14389567c9a6f53f82bb7224 upstream.

The bulk of ATA host state machine is implemented by
ata_sff_hsm_move().  The function is called from either the interrupt
handler or, if polling, a work item.  Unlike from the interrupt path,
the polling path calls the function without holding the host lock and
ata_sff_hsm_move() selectively grabs the lock.

This is completely broken.  If an IRQ triggers while polling is in
progress, the two can easily race and end up accessing the hardware
and updating state machine state at the same time.  This can put the
state machine in an illegal state and lead to a crash like the

  kernel BUG at drivers/ata/libata-sff.c:1302!
  invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
  Modules linked in:
  CPU: 1 PID: 10679 Comm: syz-executor Not tainted 4.5.0-rc1+ #300
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  task: ffff88002bd00000 ti: ffff88002e048000 task.ti: ffff88002e048000
  RIP: 0010:[<ffffffff83a83409>]  [<ffffffff83a83409>] ata_sff_hsm_move+0x619/0x1c60
  Call Trace:
   [<ffffffff83a84c31>] __ata_sff_port_intr+0x1e1/0x3a0 drivers/ata/libata-sff.c:1584
   [<ffffffff83a85611>] ata_bmdma_port_intr+0x71/0x400 drivers/ata/libata-sff.c:2877
   [<     inline     >] __ata_sff_interrupt drivers/ata/libata-sff.c:1629
   [<ffffffff83a85bf3>] ata_bmdma_interrupt+0x253/0x580 drivers/ata/libata-sff.c:2902
   [<ffffffff81479f98>] handle_irq_event_percpu+0x108/0x7e0 kernel/irq/handle.c:157
   [<ffffffff8147a717>] handle_irq_event+0xa7/0x140 kernel/irq/handle.c:205
   [<ffffffff81484573>] handle_edge_irq+0x1e3/0x8d0 kernel/irq/chip.c:623
   [<     inline     >] generic_handle_irq_desc include/linux/irqdesc.h:146
   [<ffffffff811a92bc>] handle_irq+0x10c/0x2a0 arch/x86/kernel/irq_64.c:78
   [<ffffffff811a7e4d>] do_IRQ+0x7d/0x1a0 arch/x86/kernel/irq.c:240
   [<ffffffff86653d4c>] common_interrupt+0x8c/0x8c arch/x86/entry/entry_64.S:520
   [<     inline     >] rcu_lock_acquire include/linux/rcupdate.h:490
   [<     inline     >] rcu_read_lock include/linux/rcupdate.h:874
   [<ffffffff8164b4a1>] filemap_map_pages+0x131/0xba0 mm/filemap.c:2145
   [<     inline     >] do_fault_around mm/memory.c:2943
   [<     inline     >] do_read_fault mm/memory.c:2962
   [<     inline     >] do_fault mm/memory.c:3133
   [<     inline     >] handle_pte_fault mm/memory.c:3308
   [<     inline     >] __handle_mm_fault mm/memory.c:3418
   [<ffffffff816efb16>] handle_mm_fault+0x2516/0x49a0 mm/memory.c:3447
   [<ffffffff8127dc16>] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238
   [<ffffffff8127e358>] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331
   [<ffffffff8126f514>] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264
   [<ffffffff86655578>] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986

Fix it by ensuring that the polling path is holding the host lock
before entering ata_sff_hsm_move() so that all hardware accesses and
state updates are performed under the host lock.

Signed-off-by: Tejun Heo <>
Reported-and-tested-by: Dmitry Vyukov <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: timer: Fix link corruption due to double start or stop
Takashi Iwai [Sat, 30 Jan 2016 22:09:08 +0000 (23:09 +0100)]
ALSA: timer: Fix link corruption due to double start or stop

commit f784beb75ce82f4136f8a0960d3ee872f7109e09 upstream.

Although ALSA timer code got hardening for races, it still causes
use-after-free error.  This is however rather a corrupted linked list,
not actually the concurrent accesses.  Namely, when timer start is
triggered twice, list_add_tail() is called twice, too.  This ends
up with the link corruption and triggers KASAN error.

The simplest fix would be replacing list_add_tail() with
list_move_tail(), but fundamentally it's the problem that we don't
check the double start/stop correctly.  So, the right fix here is to
add the proper checks to snd_timer_start() and snd_timer_stop() (and
their variants).

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <>
5 years agoALSA: seq: Fix yet another races among ALSA timer accesses
Takashi Iwai [Sat, 30 Jan 2016 22:30:25 +0000 (23:30 +0100)]
ALSA: seq: Fix yet another races among ALSA timer accesses

commit 2cdc7b636d55cbcf42e1e6c8accd85e62d3e9ae8 upstream.

ALSA sequencer may open/close and control ALSA timer instance
dynamically either via sequencer events or direct ioctls.  These are
done mostly asynchronously, and it may call still some timer action
like snd_timer_start() while another is calling snd_timer_close().
Since the instance gets removed by snd_timer_close(), it may lead to
a use-after-free.

This patch tries to address such a race by protecting each
snd_timer_*() call via the existing spinlock and also by avoiding the
access to timer during close call.

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: pcm: Fix potential deadlock in OSS emulation
Takashi Iwai [Sun, 31 Jan 2016 09:32:37 +0000 (10:32 +0100)]
ALSA: pcm: Fix potential deadlock in OSS emulation

commit b248371628aad599a48540962f6b85a21a8a0c3f upstream.

There are potential deadlocks in PCM OSS emulation code while
accessing read/write and mmap concurrently.  This comes from the
infamous mmap_sem usage in copy_from/to_user().  Namely,

   snd_pcm_oss_write() ->
     &runtime->oss.params_lock ->
        copy_to_user() ->
  mmap() ->
    &mm->mmap_sem ->
      snd_pcm_oss_mmap() ->

Since we can't avoid taking params_lock from mmap code path, use
trylock variant and aborts with -EAGAIN as a workaround of this AB/BA

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer check
Takashi Iwai [Mon, 1 Feb 2016 11:04:55 +0000 (12:04 +0100)]
ALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer check

commit cc85f7a634cfaf9f0713c6aa06d08817424db37a upstream.

NULL user-space buffer can be passed even in a normal path, thus it's
not good to spew a kernel warning with stack trace at each time.
Just drop snd_BUG_ON() macro usage there.

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: seq: Fix race at closing in virmidi driver
Takashi Iwai [Mon, 1 Feb 2016 11:06:42 +0000 (12:06 +0100)]
ALSA: seq: Fix race at closing in virmidi driver

commit 2d1b5c08366acd46c35a2e9aba5d650cb5bf5c19 upstream.

The virmidi driver has an open race at closing its assigned rawmidi
device, and this may lead to use-after-free in

Plug the hole by properly protecting the linked list deletion and
calling in the right order in snd_virmidi_input_close().

Reported-by: Dmitry Vyukov <>
Tested-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agointel_scu_ipcutil: underflow in scu_reg_access()
Dan Carpenter [Tue, 26 Jan 2016 09:24:25 +0000 (12:24 +0300)]
intel_scu_ipcutil: underflow in scu_reg_access()

commit b1d353ad3d5835b16724653b33c05124e1b5acf1 upstream.

"count" is controlled by the user and it can be negative.  Let's prevent
that by making it unsigned.  You have to have CAP_SYS_RAWIO to call this
function so the bug is not as serious as it could be.

Fixes: 5369c02d951a ('intel_scu_ipc: Utility driver for intel scu ipc')
Signed-off-by: Dan Carpenter <>
Signed-off-by: Darren Hart <>
Signed-off-by: Ben Hutchings <>
5 years agocrypto: algif_hash - wait for crypto_ahash_init() to complete
Wang, Rui Y [Wed, 27 Jan 2016 09:08:37 +0000 (17:08 +0800)]
crypto: algif_hash - wait for crypto_ahash_init() to complete

commit fe09786178f9df713a4b2dd6b93c0a722346bf5e upstream.

hash_sendmsg/sendpage() need to wait for the completion
of crypto_ahash_init() otherwise it can cause panic.

Signed-off-by: Rui Wang <>
Signed-off-by: Herbert Xu <>
Signed-off-by: Ben Hutchings <>
5 years agox86/mm/pat: Avoid truncation when converting cpa->numpages to address
Matt Fleming [Fri, 29 Jan 2016 11:36:10 +0000 (11:36 +0000)]
x86/mm/pat: Avoid truncation when converting cpa->numpages to address

commit 742563777e8da62197d6cb4b99f4027f59454735 upstream.

There are a couple of nasty truncation bugs lurking in the pageattr
code that can be triggered when mapping EFI regions, e.g. when we pass
a cpa->pgd pointer. Because cpa->numpages is a 32-bit value, shifting
left by PAGE_SHIFT will truncate the resultant address to 32-bits.

Viorel-Cătălin managed to trigger this bug on his Dell machine that
provides a ~5GB EFI region which requires 1236992 pages to be mapped.
When calling populate_pud() the end of the region gets calculated
incorrectly in the following buggy expression,

  end = start + (cpa->numpages << PAGE_SHIFT);

And only 188416 pages are mapped. Next, populate_pud() gets invoked
for a second time because of the loop in __change_page_attr_set_clr(),
only this time no pages get mapped because shifting the remaining
number of pages (1048576) by PAGE_SHIFT is zero. At which point the
loop in __change_page_attr_set_clr() spins forever because we fail to
map progress.

Hitting this bug depends very much on the virtual address we pick to
map the large region at and how many pages we map on the initial run
through the loop. This explains why this issue was only recently hit
with the introduction of commit

  a5caa209ba9c ("x86/efi: Fix boot crash by mapping EFI memmap
   entries bottom-up at runtime, instead of top-down")

It's interesting to note that safe uses of cpa->numpages do exist in
the pageattr code. If instead of shifting ->numpages we multiply by
PAGE_SIZE, no truncation occurs because PAGE_SIZE is a UL value, and
so the result is unsigned long.

To avoid surprises when users try to convert very large cpa->numpages
values to addresses, change the data type from 'int' to 'unsigned
long', thereby making it suitable for shifting by PAGE_SHIFT without
any type casting.

The alternative would be to make liberal use of casting, but that is
far more likely to cause problems in the future when someone adds more
code and fails to cast properly; this bug was difficult enough to
track down in the first place.

Reported-and-tested-by: Viorel-Cătălin Răpițeanu <>
Acked-by: Borislav Petkov <>
Cc: Sai Praneeth Prakhya <>
Signed-off-by: Matt Fleming <>
Signed-off-by: Thomas Gleixner <>
Signed-off-by: Ben Hutchings <>
5 years agodrm/vmwgfx: respect 'nomodeset'
Rob Clark [Wed, 15 Oct 2014 19:00:47 +0000 (15:00 -0400)]
drm/vmwgfx: respect 'nomodeset'

commit 96c5d076f0a5e2023ecdb44d8261f87641ee71e0 upstream.

Signed-off-by: Rob Clark <>
Reviewed-by: Thomas Hellstrom <>.
Signed-off-by: Dave Airlie <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: dummy: Disable switching timer backend via sysfs
Takashi Iwai [Thu, 28 Jan 2016 06:54:16 +0000 (07:54 +0100)]
ALSA: dummy: Disable switching timer backend via sysfs

commit 7ee96216c31aabe1eb42fb91ff50dae9fcd014b2 upstream.

ALSA dummy driver can switch the timer backend between system timer
and hrtimer via its hrtimer module option.  This can be also switched
dynamically via sysfs, but it may lead to a memory corruption when
switching is done while a PCM stream is running; the stream instance
for the newly switched timer method tries to access the memory that
was allocated by another timer method although the sizes differ.

As the simplest fix, this patch just disables the switch via sysfs by
dropping the writable bit.

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agocrypto: shash - Fix has_key setting
Herbert Xu [Tue, 26 Jan 2016 16:16:37 +0000 (00:16 +0800)]
crypto: shash - Fix has_key setting

commit 00420a65fa2beb3206090ead86942484df2275f3 upstream.

The has_key logic is wrong for shash algorithms as they always
have a setkey function.  So we should instead be testing against

Fixes: a5596d633278 ("crypto: hash - Add crypto_ahash_has_setkey")
Reported-by: Stephan Mueller <>
Signed-off-by: Herbert Xu <>
Tested-by: Stephan Mueller <>
Signed-off-by: Ben Hutchings <>
5 years agotty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
Peter Hurley [Mon, 11 Jan 2016 06:40:55 +0000 (22:40 -0800)]
tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)

commit 5c17c861a357e9458001f021a7afa7aab9937439 upstream.

ioctl(TIOCGETD) retrieves the line discipline id directly from the
ldisc because the line discipline id (c_line) in termios is untrustworthy;
userspace may have set termios via ioctl(TCSETS*) without actually
changing the line discipline via ioctl(TIOCSETD).

However, directly accessing the current ldisc via tty->ldisc is
unsafe; the ldisc ptr dereferenced may be stale if the line discipline
is changing via ioctl(TIOCSETD) or hangup.

Wait for the line discipline reference (just like read() or write())
to retrieve the "current" line discipline id.

Signed-off-by: Peter Hurley <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
5 years agoSCSI: fix crashes in sd and sr runtime PM
Alan Stern [Wed, 20 Jan 2016 16:26:01 +0000 (11:26 -0500)]
SCSI: fix crashes in sd and sr runtime PM

commit 13b4389143413a1f18127c07f72c74cad5b563e8 upstream.

Runtime suspend during driver probe and removal can cause problems.
The driver's runtime_suspend or runtime_resume callbacks may invoked
before the driver has finished binding to the device or after the
driver has unbound from the device.

This problem shows up with the sd and sr drivers, and can cause disk
or CD/DVD drives to become unusable as a result.  The fix is simple.
The drivers store a pointer to the scsi_disk or scsi_cd structure as
their private device data when probing is finished, so we simply have
to be sure to clear the private data during removal and test it during
runtime suspend/resume.

This fixes <>.

Signed-off-by: Alan Stern <>
Reported-by: Paul Menzel <>
Reported-by: Erich Schubert <>
Reported-by: Alexandre Rossi <>
Tested-by: Paul Menzel <>
Tested-by: Erich Schubert <>
Signed-off-by: James Bottomley <>
[bwh: Backported to 3.2: drop changes to sr as it doesn't support runtime PM]
Signed-off-by: Ben Hutchings <>
5 years agoperf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
Markus Trippelsdorf [Mon, 14 Dec 2015 15:44:03 +0000 (16:44 +0100)]
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed

commit d4913cbd05bab685e49c8174896e563b2487d054 upstream.

The issue was pointed out by gcc-6's -Wmisleading-indentation.

Signed-off-by: Markus Trippelsdorf <>
Acked-by: Ingo Molnar <>
Cc: Ben Hutchings <>
Cc: Matt Fleming <>
Cc: Peter Zijlstra <>
Fixes: c97cf42219b7 ("perf top: Live TUI Annotation")
Signed-off-by: Arnaldo Carvalho de Melo <>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <>
5 years agorfkill: fix rfkill_fop_read wait_event usage
Johannes Berg [Tue, 26 Jan 2016 10:29:03 +0000 (11:29 +0100)]
rfkill: fix rfkill_fop_read wait_event usage

commit 6736fde9672ff6717ac576e9bba2fd5f3dfec822 upstream.

The code within wait_event_interruptible() is called with
!TASK_RUNNING, so mustn't call any functions that can sleep,
like mutex_lock().

Since we re-check the list_empty() in a loop after the wait,
it's safe to simply use list_empty() without locking.

This bug has existed forever, but was only discovered now
because all userspace implementations, including the default
'rfkill' tool, use poll() or select() to get a readable fd
before attempting to read.

Fixes: c64fb01627e24 ("rfkill: create useful userspace interface")
Reported-by: Dmitry Vyukov <>
Signed-off-by: Johannes Berg <>
Signed-off-by: Ben Hutchings <>
5 years agovirtio_pci: fix use after free on release
Michael S. Tsirkin [Thu, 14 Jan 2016 14:00:41 +0000 (16:00 +0200)]
virtio_pci: fix use after free on release

commit 2989be09a8a9d62a785137586ad941f916e08f83 upstream.

KASan detected a use-after-free error in virtio-pci remove code. In
virtio_pci_remove(), vp_dev is still used after being freed in
unregister_virtio_device() (in virtio_pci_release_dev() more

To fix, keep a reference until cleanup is done.

Fixes: 63bd62a08ca4 ("virtio_pci: defer kfree until release callback")
Reported-by: Jerome Marchand <>
Cc: Sasha Levin <>
Signed-off-by: Michael S. Tsirkin <>
Tested-by: Jerome Marchand <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
5 years agolibata: disable forced PORTS_IMPL for >= AHCI 1.3
Tejun Heo [Fri, 15 Jan 2016 20:13:05 +0000 (15:13 -0500)]
libata: disable forced PORTS_IMPL for >= AHCI 1.3

commit 566d1827df2ef0cbe921d3d6946ac3007b1a6938 upstream.

Some early controllers incorrectly reported zero ports in PORTS_IMPL
register and the ahci driver fabricates PORTS_IMPL from the number of
ports in those cases.  This hasn't mattered but with the new nvme
controllers there are cases where zero PORTS_IMPL is valid and should
be honored.

Disable the workaround for >= AHCI 1.3.

Signed-off-by: Tejun Heo <>
Reported-by: Andy Lutomirski <>
Cc: Sergei Shtylyov <>
Signed-off-by: Ben Hutchings <>
5 years agoPCI/AER: Flush workqueue on device remove to avoid use-after-free
Sebastian Andrzej Siewior [Mon, 25 Jan 2016 16:08:00 +0000 (10:08 -0600)]
PCI/AER: Flush workqueue on device remove to avoid use-after-free

commit 4ae2182b1e3407de369f8c5d799543b7db74221b upstream.

A Root Port's AER structure (rpc) contains a queue of events.  aer_irq()
enqueues AER status information and schedules aer_isr() to dequeue and
process it.  When we remove a device, aer_remove() waits for the queue to
be empty, then frees the rpc struct.

But aer_isr() references the rpc struct after dequeueing and possibly
emptying the queue, which can cause a use-after-free error as in the
following scenario with two threads, aer_isr() on the left and a
concurrent aer_remove() on the right:

  Thread A                      Thread B
  --------                      --------
                                  wait_event(rpc->prod_idx == rpc->cons_idx)
                                  # now blocked until queue becomes empty
  aer_isr():                      # ...
    rpc->cons_idx++               # unblocked because queue is now empty
    ...                           kfree(rpc)

To prevent this problem, use flush_work() to wait until the last scheduled
instance of aer_isr() has completed before freeing the rpc struct in

I reproduced this use-after-free by flashing a device FPGA and
re-enumerating the bus to find the new device.  With SLUB debug, this
crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in

  pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000
  Unable to handle kernel paging request for data at address 0x27ef9e3e
  Workqueue: events aer_isr
  GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0
  NIP [602f5328] pci_walk_bus+0xd4/0x104

[bhelgaas: changelog, stable tag]
Signed-off-by: Sebastian Andrzej Siewior <>
Signed-off-by: Bjorn Helgaas <>
Signed-off-by: Ben Hutchings <>
5 years agoUSB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
Greg Kroah-Hartman [Wed, 20 Jan 2016 07:43:13 +0000 (23:43 -0800)]
USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable

commit e03cdf22a2727c60307be6a729233edab3bfda9c upstream.

Harald Linden reports that the ftdi_sio driver works properly for the
Yaesu SCU-18 cable if the device ids are added to the driver.  So let's
add them.

Reported-by: Harald Linden <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
5 years agoALSA: seq: Degrade the error message for too many opens
Takashi Iwai [Mon, 25 Jan 2016 10:24:56 +0000 (11:24 +0100)]
ALSA: seq: Degrade the error message for too many opens

commit da10816e3d923565b470fec78a674baba794ed33 upstream.

ALSA OSS sequencer spews a kernel error message ("ALSA: seq_oss: too
many applications") when user-space tries to open more than the
limit.  This means that it can easily fill the log buffer.

Since it's merely a normal error, it's safe to suppress it via
pr_debug() instead.

Signed-off-by: Takashi Iwai <>
[bwh: Backported to 3.2: this was still using snd_printk()]
Signed-off-by: Ben Hutchings <>
5 years agoALSA: seq: Fix incorrect sanity check at snd_seq_oss_synth_cleanup()
Takashi Iwai [Mon, 25 Jan 2016 10:01:47 +0000 (11:01 +0100)]
ALSA: seq: Fix incorrect sanity check at snd_seq_oss_synth_cleanup()

commit 599151336638d57b98d92338aa59c048e3a3e97d upstream.

ALSA sequencer OSS emulation code has a sanity check for currently
opened devices, but there is a thinko there, eventually it spews
warnings and skips the operation wrongly like:
  WARNING: CPU: 1 PID: 7573 at sound/core/seq/oss/seq_oss_synth.c:311

Fix this off-by-one error.

Reported-by: Dmitry Vyukov <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
5 years agoUSB: serial: option: Adding support for Telit LE922
Daniele Palmas [Tue, 12 Jan 2016 16:22:06 +0000 (17:22 +0100)]
USB: serial: option: Adding support for Telit LE922

commit ff4e2494dc17b173468e1713fdf6237fd8578bc7 upstream.

This patch adds support for two PIDs of LE922.

Signed-off-by: Daniele Palmas <>
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
5 years agoUSB: serial: visor: fix crash on detecting device without write_urbs
Vladis Dronov [Tue, 12 Jan 2016 14:10:50 +0000 (15:10 +0100)]
USB: serial: visor: fix crash on detecting device without write_urbs

commit cb3232138e37129e88240a98a1d2aba2187ff57c upstream.

The visor driver crashes in clie_5_attach() when a specially crafted USB
device without bulk-out endpoint is detected. This fix adds a check that
the device has proper configuration expected by the driver.

Reported-by: Ralf Spenneberg <>
Signed-off-by: Vladis Dronov <>
Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices")
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
5 years agoUSB: visor: fix null-deref at probe
Johan Hovold [Tue, 12 Jan 2016 11:05:20 +0000 (12:05 +0100)]
USB: visor: fix null-deref at probe

commit cac9b50b0d75a1d50d6c056ff65c005f3224c8e0 upstream.

Fix null-pointer dereference at probe should a (malicious) Treo device
lack the expected endpoints.

Specifically, the Treo port-setup hack was dereferencing the bulk-in and
interrupt-in urbs without first making sure they had been allocated by

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
5 years agoUSB: cp210x: add ID for IAI USB to RS485 adaptor
Peter Dedecker [Fri, 8 Jan 2016 11:34:41 +0000 (12:34 +0100)]
USB: cp210x: add ID for IAI USB to RS485 adaptor

commit f487c54ddd544e1c9172cd510954f697b77b76e3 upstream.

Added the USB serial console device ID for IAI Corp. RCB-CV-USB
USB to RS485 adaptor.

Signed-off-by: Peter Dedecker <>
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
5 years agosctp: allow setting SCTP_SACK_IMMEDIATELY by the application
Marcelo Ricardo Leitner [Fri, 22 Jan 2016 20:29:49 +0000 (18:29 -0200)]
sctp: allow setting SCTP_SACK_IMMEDIATELY by the application

commit 27f7ed2b11d42ab6d796e96533c2076ec220affc upstream.

This patch extends commit b93d6471748d ("sctp: implement the sender side
for SACK-IMMEDIATELY extension") as it didn't white list
SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be
understood as an invalid flag and returning -EINVAL to the application.

Note that the actual handling of the flag is already there in

Fixes: b93d6471748d ("sctp: implement the sender side for SACK-IMMEDIATELY extension")
Signed-off-by: Marcelo Ricardo Leitner <>
Acked-by: Vlad Yasevich <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: drop the second hunk as we don't have SCTP_SNDINFO
 cmsg support]
Signed-off-by: Ben Hutchings <>
5 years agopptp: fix illegal memory access caused by multiple bind()s
Hannes Frederic Sowa [Fri, 22 Jan 2016 00:39:43 +0000 (01:39 +0100)]
pptp: fix illegal memory access caused by multiple bind()s

commit 9a368aff9cb370298fa02feeffa861f2db497c18 upstream.

Several times already this has been reported as kasan reports caused by
syzkaller and trinity and people always looked at RCU races, but it is
much more simple. :)

In case we bind a pptp socket multiple times, we simply add it to
the callid_sock list but don't remove the old binding. Thus the old
socket stays in the bucket with unused call_id indexes and doesn't get
cleaned up. This causes various forms of kasan reports which were hard
to pinpoint.

Simply don't allow multiple binds and correct error handling in
pptp_bind. Also keep sk_state bits in place in pptp_connect.

Fixes: 00959ade36acad ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Cc: Dmitry Kozlov <>
Cc: Sasha Levin <>
Cc: Dmitry Vyukov <>
Reported-by: Dmitry Vyukov <>
Cc: Dave Jones <>
Reported-by: Dave Jones <>
Signed-off-by: Hannes Frederic Sowa <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
5 years agoaf_unix: fix struct pid memory leak
Eric Dumazet [Sun, 24 Jan 2016 21:53:50 +0000 (13:53 -0800)]
af_unix: fix struct pid memory leak

commit fa0dc04df259ba2df3ce1920e9690c7842f8fa4b upstream.

Dmitry reported a struct pid leak detected by a syzkaller program.

Bug happens in unix_stream_recvmsg() when we break the loop when a
signal is pending, without properly releasing scm.

Fixes: b3ca9b02b007 ("net: fix multithreaded signal handling in unix recv routines")
Reported-by: Dmitry Vyukov <>
Signed-off-by: Eric Dumazet <>
Cc: Rainer Weikusat <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: cookie is *sicob->scm, not scm]
Signed-off-by: Ben Hutchings <>
5 years agocdc-acm:exclude Samsung phone 04e8:685d
Oliver Neukum [Mon, 18 Jan 2016 14:45:18 +0000 (15:45 +0100)]
cdc-acm:exclude Samsung phone 04e8:685d

commit e912e685f372ab62a2405a1acd923597f524e94a upstream.

This phone needs to be handled by a specialised firmware tool
and is reported to crash irrevocably if cdc-acm takes it.

Signed-off-by: Oliver Neukum <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
5 years agousb: cdc-acm: send zero packet for intel 7260 modem
Lu Baolu [Wed, 6 Jan 2016 07:10:04 +0000 (15:10 +0800)]
usb: cdc-acm: send zero packet for intel 7260 modem

commit ffdb1e369a73b380fce95b05f8498d92c43842b4 upstream.

For Intel 7260 modem, it is needed for host side to send zero
packet if the BULK OUT size is equal to USB endpoint max packet
length. Otherwise, modem side may still wait for more data and
cannot give response to host side.

Signed-off-by: Konrad Leszczynski <>
Signed-off-by: Lu Baolu <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
5 years agoitimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
Thomas Gleixner [Thu, 14 Jan 2016 16:54:48 +0000 (16:54 +0000)]
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper

commit 51cbb5242a41700a3f250ecfb48dcfb7e4375ea4 upstream.

As Helge reported for timerfd we have the same issue in itimers. We return
remaining time larger than the programmed relative time to user space in case
of CONFIG_TIME_LOW_RES=y. Use the proper function to adjust the extra time
added in hrtimer_start_range_ns().

Signed-off-by: Thomas Gleixner <>
Cc: Peter Zijlstra <>
Cc: Helge Deller <>
Cc: John Stultz <>
Signed-off-by: Thomas Gleixner <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
5 years agoposix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
Thomas Gleixner [Thu, 14 Jan 2016 16:54:47 +0000 (16:54 +0000)]
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper

commit 572c39172684c3711e4a03c9a7380067e2b0661c upstream.

As Helge reported for timerfd we have the same issue in posix timers. We
return remaining time larger than the programmed relative time to user space
in case of CONFIG_TIME_LOW_RES=y. Use the proper function to adjust the extra
time added in hrtimer_start_range_ns().

Signed-off-by: Thomas Gleixner <>
Cc: Peter Zijlstra <>
Cc: Helge Deller <>
Cc: John Stultz <>
Signed-off-by: Thomas Gleixner <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
5 years agotimerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
Thomas Gleixner [Thu, 14 Jan 2016 16:54:46 +0000 (16:54 +0000)]
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper

commit b62526ed11a1fe3861ab98d40b7fdab8981d788a upstream.

Helge reported that a relative timer can return a remaining time larger than
the programmed relative time on parisc and other architectures which have
CONFIG_TIME_LOW_RES set. This happens because we add a jiffie to the resulting
expiry time to prevent short timeouts.

Use the new function hrtimer_expires_remaining_adjusted() to calculate the
remaining time. It takes that extra added time into account for relative

Reported-and-tested-by: Helge Deller <>
Signed-off-by: Thomas Gleixner <>
Cc: Peter Zijlstra <>
Cc: John Stultz <>
Signed-off-by: Thomas Gleixner <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
5 years agohrtimer: Handle remaining time proper for TIME_LOW_RES
Thomas Gleixner [Thu, 14 Jan 2016 16:54:46 +0000 (16:54 +0000)]
hrtimer: Handle remaining time proper for TIME_LOW_RES

commit 203cbf77de59fc8f13502dcfd11350c6d4a5c95f upstream.

If CONFIG_TIME_LOW_RES is enabled we add a jiffie to the relative timeout to
prevent short sleeps, but we do not account for that in interfaces which
retrieve the remaining time.

Helge observed that timerfd can return a remaining time larger than the
relative timeout. That's not expected and breaks userland test programs.

Store the information that the timer was armed relative and provide functions
to adjust the remaining time. To avoid bloating the hrtimer struct make state
a u8, which as a bonus results in better code on x86 at least.

Reported-and-tested-by: Helge Deller <>
Signed-off-by: Thomas Gleixner <>
Cc: Peter Zijlstra <>
Cc: John Stultz <>
Signed-off-by: Thomas Gleixner <>
[bwh: Backported to 3.2:
 - Use #ifdef instead of IS_ENABLED() as that doesn't work for config
   symbols that don't exist on the current architecture
 - Use KTIME_LOW_RES directly instead of hrtimer_resolution
 - Use ktime_sub() instead of modifying ktime::tv64 directly
 - Adjust filename, context]
Signed-off-by: Ben Hutchings <>
5 years agoKVM: vmx: fix MPX detection
Paolo Bonzini [Wed, 26 Mar 2014 14:54:00 +0000 (15:54 +0100)]
KVM: vmx: fix MPX detection

commit 920c837785699bcc48f4a729ba9ee3492f620b95 upstream.

kvm_x86_ops is still NULL at this point.  Since kvm_init_msr_list
cannot fail, it is safe to initialize it before the call.

Fixes: 93c4adc7afedf9b0ec190066d45b6d67db5270da
Reported-by: Fengguang Wu <>
Tested-by: Jet Chen <>
Signed-off-by: Paolo Bonzini <>
Cc: Brad Spengler <>
[bwh: Dependency of "KVM: x86: expose MSR_TSC_AUX to userspace",
 applied in 3.2.77]
Signed-off-by: Ben Hutchings <>
5 years agoLinux 3.2.77 v3.2.77
Ben Hutchings [Sat, 13 Feb 2016 10:34:14 +0000 (10:34 +0000)]
Linux 3.2.77

5 years agousbvision: fix crash on detecting device with invalid configuration
Vladis Dronov [Mon, 16 Nov 2015 17:55:11 +0000 (15:55 -0200)]
usbvision: fix crash on detecting device with invalid configuration

commit fa52bd506f274b7619955917abfde355e3d19ffe upstream.

The usbvision driver crashes when a specially crafted usb device with invalid
number of interfaces or endpoints is detected. This fix adds checks that the
device has proper configuration expected by the driver.

Reported-by: Ralf Spenneberg <>
Signed-off-by: Vladis Dronov <>
Signed-off-by: Mauro Carvalho Chehab <>
[bwh: Backport to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
5 years agousbvision fix overflow of interfaces array
Oliver Neukum [Tue, 27 Oct 2015 11:51:34 +0000 (09:51 -0200)]
usbvision fix overflow of interfaces array

commit 588afcc1c0e45358159090d95bf7b246fb67565f upstream.

This fixes the crash reported in:
The interface number needs a sanity check.

Signed-off-by: Oliver Neukum <>
Cc: Vladis Dronov <>
Signed-off-by: Hans Verkuil <>
Signed-off-by: Mauro Carvalho Chehab <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
5 years agousbvision: fix leak of usb_dev on failure paths in usbvision_probe()
Alexey Khoroshilov [Fri, 27 Mar 2015 22:39:09 +0000 (19:39 -0300)]
usbvision: fix leak of usb_dev on failure paths in usbvision_probe()

commit afd270d1a45043cef14341bcceff62ed50e8dc9a upstream.

There is no usb_put_dev() on failure paths in usbvision_probe().

Found by Linux Driver Verification project (

Signed-off-by: Alexey Khoroshilov <>
Signed-off-by: Hans Verkuil <>
Signed-off-by: Mauro Carvalho Chehab <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>