9 years agoALSA: asihpi: Fix unlocked snd_pcm_stop() call
Takashi Iwai [Thu, 11 Jul 2013 15:55:57 +0000 (17:55 +0200)]
ALSA: asihpi: Fix unlocked snd_pcm_stop() call

commit 60478295d6876619f8f47f6d1a5c25eaade69ee3 upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Signed-off-by: Takashi Iwai <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
9 years agousb: dwc3: fix wrong bit mask in dwc3_event_type
Huang Rui [Wed, 26 Jun 2013 17:08:11 +0000 (01:08 +0800)]
usb: dwc3: fix wrong bit mask in dwc3_event_type

commit 1974d494dea05ea227cb42f5e918828801e237aa upstream.

Per dwc3 2.50a spec, the is_devspec bit is used to distinguish the
Device Endpoint-Specific Event or Device-Specific Event (DEVT). If the
bit is 1, the event is represented Device-Specific Event, then use
[7:1] bits as Device Specific Event to marked the type. It has 7 bits,
and we can see the reserved8_31 variable name which means from 8 to 31
bits marked reserved, actually there are 24 bits not 25 bits between
that. And 1 + 7 + 24 = 32, the event size is 4 byes.

So in dwc3_event_type, the bit mask should be:
is_devspec [0] 1  bit
type [7:1] 7  bits
reserved8_31 [31:8] 24 bits

This patch should be backported to kernels as old as 3.2, that contain
the commit 72246da40f3719af3bfd104a2365b32537c27d83 "usb: Introduce
DesignWare USB3 DRD Driver".

Signed-off-by: Huang Rui <>
Signed-off-by: Felipe Balbi <>
Signed-off-by: Ben Hutchings <>
9 years agousb: dwc3: gadget: don't prevent gadget from being probed if we fail
Felipe Balbi [Mon, 15 Jul 2013 09:36:35 +0000 (12:36 +0300)]
usb: dwc3: gadget: don't prevent gadget from being probed if we fail

commit cdcedd6981194e511cc206887db661d016069d68 upstream.

In case we fail our ->udc_start() callback, we
should be ready to accept another modprobe following
the failed one.

We had forgotten to clear dwc->gadget_driver back
to NULL and, because of that, we were preventing
gadget driver modprobe from being retried.

Signed-off-by: Felipe Balbi <>
Signed-off-by: Ben Hutchings <>
9 years agoACPI / memhotplug: Fix a stale pointer in error path
Toshi Kani [Wed, 10 Jul 2013 16:47:13 +0000 (10:47 -0600)]
ACPI / memhotplug: Fix a stale pointer in error path

commit d19f503e22316a84c39bc19445e0e4fdd49b3532 upstream.

device->driver_data needs to be cleared when releasing its data,
mem_device, in an error path of acpi_memory_device_add().

The function evaluates the _CRS of memory device objects, and fails
when it gets an unexpected resource or cannot allocate memory.  A
kernel crash or data corruption may occur when the kernel accesses
the stale pointer.

Signed-off-by: Toshi Kani <>
Reviewed-by: Yasuaki Ishimatsu <>
Signed-off-by: Rafael J. Wysocki <>
Signed-off-by: Ben Hutchings <>
9 years agoext4: don't allow ext4_free_blocks() to fail due to ENOMEM
Theodore Ts'o [Sat, 13 Jul 2013 04:40:35 +0000 (00:40 -0400)]
ext4: don't allow ext4_free_blocks() to fail due to ENOMEM

commit e7676a704ee0a1ef71a6b23760b5a8f6896cb1a1 upstream.

The filesystem should not be marked inconsistent if ext4_free_blocks()
is not able to allocate memory.  Unfortunately some callers (most
notably ext4_truncate) don't have a way to reflect an error back up to
the VFS.  And even if we did, most userspace applications won't deal
with most system calls returning ENOMEM anyway.

Reported-by: Nagachandra P <>
Signed-off-by: "Theodore Ts'o" <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
9 years agolockd: protect nlm_blocked access in nlmsvc_retry_blocked
David Jeffery [Wed, 10 Jul 2013 17:19:50 +0000 (13:19 -0400)]
lockd: protect nlm_blocked access in nlmsvc_retry_blocked

commit 1c327d962fc420aea046c16215a552710bde8231 upstream.

In nlmsvc_retry_blocked, the check that the list is non-empty and acquiring
the pointer of the first entry is unprotected by any lock.  This allows a rare
race condition when there is only one entry on the list.  A function such as
nlmsvc_grant_callback() can be called, which will temporarily remove the entry
from the list.  Between the list_empty() and list_entry(),the list may become
empty, causing an invalid pointer to be used as an nlm_block, leading to a
possible crash.

This patch adds the nlm_block_lock around these calls to prevent concurrent
use of the nlm_blocked list.

This was a regression introduced by
f904be9cc77f361d37d71468b13ff3d1a1823dea  "lockd: Mostly remove BKL from
the server".

Cc: Bryan Schumaker <>
Signed-off-by: David Jeffery <>
Signed-off-by: J. Bruce Fields <>
Signed-off-by: Ben Hutchings <>
9 years agoASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK
Fabio Estevam [Thu, 4 Jul 2013 23:01:03 +0000 (20:01 -0300)]
ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK

commit 5c78dfe87ea04b501ee000a7f03b9432ac9d008c upstream.

SGTL5000_PLL_FRAC_DIV_MASK is used to mask bits 0-10 (11 bits in total) of
register CHIP_PLL_CTRL, so fix the mask to accomodate all this bit range.

Reported-by: Oskar Schirmer <>
Signed-off-by: Fabio Estevam <>
Signed-off-by: Mark Brown <>
Signed-off-by: Ben Hutchings <>
9 years agoASoC: sglt5000: Fix the default value of CHIP_SSS_CTRL
Fabio Estevam [Thu, 4 Jul 2013 23:01:02 +0000 (20:01 -0300)]
ASoC: sglt5000: Fix the default value of CHIP_SSS_CTRL

commit 016fcab8ff46fca29375d484226ec91932aa4a07 upstream.

According to the sgtl5000 reference manual, the default value of CHIP_SSS_CTRL
is 0x10.

Reported-by: Oskar Schirmer <>
Signed-off-by: Fabio Estevam <>
Signed-off-by: Mark Brown <>
[bwh: Backported to 3.2: format of register defaults array is different]
Signed-off-by: Ben Hutchings <>
9 years agoxen/blkback: Check for insane amounts of request on the ring (v6).
Konrad Rzeszutek Wilk [Wed, 23 Jan 2013 21:54:32 +0000 (16:54 -0500)]
xen/blkback: Check for insane amounts of request on the ring (v6).

commit 8e3f8755545cc4a7f4da8e9ef76d6d32e0dca576 upstream.

Check that the ring does not have an insane amount of requests
(more than there could fit on the ring).

If we detect this case we will stop processing the requests
and wait until the XenBus disconnects the ring.

The existing check RING_REQUEST_CONS_OVERFLOW which checks for how
many responses we have created in the past (rsp_prod_pvt) vs
requests consumed (req_cons) and whether said difference is greater or
equal to the size of the ring, does not catch this case.

Wha the condition does check if there is a need to process more
as we still have a backlog of responses to finish. Note that both
of those values (rsp_prod_pvt and req_cons) are not exposed on the
shared ring.

To understand this problem a mini crash course in ring protocol
response/request updates is in place.

There are four entries: req_prod and rsp_prod; req_event and rsp_event
to track the ring entries. We are only concerned about the first two -
which set the tone of this bug.

The req_prod is a value incremented by frontend for each request put
on the ring. Conversely the rsp_prod is a value incremented by the backend
for each response put on the ring (rsp_prod gets set by rsp_prod_pvt when
pushing the responses on the ring).  Both values can
wrap and are modulo the size of the ring (in block case that is 32).
Please see RING_GET_REQUEST and RING_GET_RESPONSE for the more details.

The culprit here is that if the difference between the
req_prod and req_cons is greater than the ring size we have a problem.
Fortunately for us, the '__do_block_io_op' loop:

rc = blk_rings->common.req_cons;
rp = blk_rings->common.sring->req_prod;

while (rc != rp) {

blk_rings->common.req_cons = ++rc; /* before make_response() */


will loop up to the point when rc == rp. The macros inside of the
loop (RING_GET_REQUEST) is smart and is indexing based on the modulo
of the ring size. If the frontend has provided a bogus req_prod value
we will loop until the 'rc == rp' - which means we could be processing
already processed requests (or responses) often.

The reason the RING_REQUEST_CONS_OVERFLOW is not helping here is
b/c it only tracks how many responses we have internally produced
and whether we would should process more. The astute reader will
notice that the macro RING_REQUEST_CONS_OVERFLOW provides two
arguments - more on this later.

For example, if we were to enter this function with these values:

        blk_rings->common.sring->req_prod =  X+31415 (X is the value from
the last time __do_block_io_op was called).
        blk_rings->common.req_cons = X
        blk_rings->common.rsp_prod_pvt = X

The RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, blk_rings->common.req_cons)
is doing:

req_cons - rsp_prod_pvt >= 32

Which is,
X - X >= 32 or 0 >= 32

And that is false, so we continue on looping (this bug).

If we re-use said macro RING_REQUEST_CONS_OVERFLOW and pass in the rp
instead (sring->req_prod) of rc, the this macro can do the check:

     req_prod - rsp_prov_pvt >= 32

Which is,
       X + 31415 - X >= 32 , or 31415 >= 32

which is true, so we can error out and break out of the function.

Unfortunatly the difference between rsp_prov_pvt and req_prod can be
at 32 (which would error out in the macro). This condition exists when
the backend is lagging behind with the responses and still has not finished
responding to all of them (so make_response has not been called), and
the rsp_prov_pvt + 32 == req_cons. This ends up with us not being able
to use said macro.

Hence introducing a new macro called RING_REQUEST_PROD_OVERFLOW which does
a simple check of:

    req_prod - rsp_prod_pvt > RING_SIZE

And with the X values from above:

   X + 31415 - X > 32

Returns true. Also not that if the ring is full (which is where
the RING_REQUEST_CONS_OVERFLOW triggered), we would not hit the
same condition:

   X + 32 - X > 32

Which is false.

Lets use that macro.
Note that in v5 of this patchset the macro was different - we used an
earlier version.

[v1: Move the check outside the loop]
[v2: Add a pr_warn as suggested by David]
[v3: Use RING_REQUEST_CONS_OVERFLOW as suggested by Jan]
[v4: Move wake_up after kthread_stop as suggested by Jan]
[v6: Use RING_REQUEST_PROD_OVERFLOW - Jan's version]
Signed-off-by: Konrad Rzeszutek Wilk <>
Reviewed-by: Jan Beulich <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
9 years agoxen/io/ring.h: new macro to detect whether there are too many requests on the ring
Jan Beulich [Mon, 17 Jun 2013 19:16:33 +0000 (15:16 -0400)]
xen/io/ring.h: new macro to detect whether there are too many requests on the ring

commit 8d9256906a97c24e97e016482b9be06ea2532b05 upstream.

Backends may need to protect themselves against an insane number of
produced requests stored by a frontend, in case they iterate over
requests until reaching the req_prod value. There can't be more
requests on the ring than the difference between produced requests
and produced (but possibly not yet published) responses.

This is a more strict alternative to a patch previously posted by
Konrad Rzeszutek Wilk <>.

Signed-off-by: Jan Beulich <>
Signed-off-by: Konrad Rzeszutek Wilk <>
Signed-off-by: Ben Hutchings <>
9 years agotracing: Use current_uid() for critical time tracing
Steven Rostedt (Red Hat) [Fri, 31 May 2013 01:10:37 +0000 (21:10 -0400)]
tracing: Use current_uid() for critical time tracing

commit f17a5194859a82afe4164e938b92035b86c55794 upstream.

The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.

When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.

During testing, this RCU lockdep dump appeared:

[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G        W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021]  #0:  (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G        W    3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021]  0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021]  ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021]  ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021]  [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021]  [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021]  [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021]  [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021]  [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021]  [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021]  [<ffffffff8154bdca>] int_signal+0x12/0x17

What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.

The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).

As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.

This fixes the RCU suspicious splat.

Signed-off-by: Steven Rostedt <>
Signed-off-by: Ben Hutchings <>
9 years agofanotify: info leak in copy_event_to_user()
Dan Carpenter [Mon, 8 Jul 2013 22:59:40 +0000 (15:59 -0700)]
fanotify: info leak in copy_event_to_user()

commit de1e0c40aceb9d5bff09c3a3b97b2f1b178af53f upstream.

The ->reserved field isn't cleared so we leak one byte of stack
information to userspace.

Signed-off-by: Dan Carpenter <>
Cc: Eric Paris <>
Cc: Al Viro <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
9 years agoFix incorrect memset in bnx2fc_parse_fcp_rsp
Andi Kleen [Mon, 3 Sep 2012 18:50:30 +0000 (20:50 +0200)]
Fix incorrect memset in bnx2fc_parse_fcp_rsp

commit 16da05b1158d1bcb31656e636a8736a663b1cf1f upstream.

gcc 4.8 warns because the memset only clears sizeof(char *) bytes, not
the whole buffer. Use the correct buffer size and clear the whole sense

/backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c: In
function 'bnx2fc_parse_fcp_rsp':
warning: argument to 'sizeof' in 'memset' call is the same expression as
the destination; did you mean to provide an explicit length?
   memset(sc_cmd->sense_buffer, 0, sizeof(sc_cmd->sense_buffer));

Signed-off-by: Andi Kleen <>
Acked-by: Bhanu Prakash Gollapudi <>
Signed-off-by: James Bottomley <>
Signed-off-by: Ben Hutchings <>
9 years agovirtio_net: fix race in RX VQ processing
Michael S. Tsirkin [Tue, 9 Jul 2013 10:19:18 +0000 (13:19 +0300)]
virtio_net: fix race in RX VQ processing

commit cbdadbbf0c790f79350a8f36029208944c5487d0 upstream.

virtio net called virtqueue_enable_cq on RX path after napi_complete, so
with NAPI_STATE_SCHED clear - outside the implicit napi lock.
This violates the requirement to synchronize virtqueue_enable_cq wrt
virtqueue_add_buf.  In particular, used event can move backwards,
causing us to lose interrupts.
In a debug build, this can trigger panic within START_USE.

Jason Wang reports that he can trigger the races artificially,
by adding udelay() in virtqueue_enable_cb() after virtio_mb().

However, we must call napi_complete to clear NAPI_STATE_SCHED before
polling the virtqueue for used buffers, otherwise napi_schedule_prep in
a callback will fail, causing us to lose RX events.

To fix, call virtqueue_enable_cb_prepare with NAPI_STATE_SCHED
set (under napi lock), later call virtqueue_poll with
NAPI_STATE_SCHED clear (outside the lock).

Reported-by: Jason Wang <>
Tested-by: Jason Wang <>
Acked-by: Jason Wang <>
Signed-off-by: Michael S. Tsirkin <>
Signed-off-by: David S. Miller <>
[wg: Backported to 3.2]
Signed-off-by: Wolfram Gloger <>
Signed-off-by: Ben Hutchings <>
9 years agovirtio: support unlocked queue poll
Michael S. Tsirkin [Tue, 9 Jul 2013 10:19:18 +0000 (13:19 +0300)]
virtio: support unlocked queue poll

commit cc229884d3f77ec3b1240e467e0236c3e0647c0c upstream.

This adds a way to check ring empty state after enable_cb outside any
locks. Will be used by virtio_net.

Note: there's room for more optimization: caller is likely to have a
memory barrier already, which means we might be able to get rid of a
barrier here.  Deferring this optimization until we do some

Signed-off-by: Michael S. Tsirkin <>
Signed-off-by: David S. Miller <>
[wg: Backported to 3.2]
Signed-off-by: Wolfram Gloger <>
Signed-off-by: Ben Hutchings <>
9 years agosparc: tsb must be flushed before tlb
Dave Kleikamp [Tue, 18 Jun 2013 14:05:36 +0000 (09:05 -0500)]
sparc: tsb must be flushed before tlb

commit 23a01138efe216f8084cfaa74b0b90dd4b097441 upstream.

This fixes a race where a cpu may re-load a tlb from a stale tsb right
after it has been flushed by a remote function call.

I still see some instability when stressing the system with parallel
kernel builds while creating memory pressure by writing to
/proc/sys/vm/nr_hugepages, but this patch improves the stability

Signed-off-by: Dave Kleikamp <>
Acked-by: Bob Picco <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agosparc64 address-congruence property
bob picco [Tue, 11 Jun 2013 18:54:51 +0000 (14:54 -0400)]
sparc64 address-congruence property

commit 771a37ff4d80b80db3b0df3e7696f14b298c67b7 upstream.

The Machine Description (MD) property "address-congruence-offset" is
optional. According to the MD specification the value is assumed 0UL when
not present. This caused early boot failure on T5.

Signed-off-by: Bob Picco <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agosparc32: vm_area_struct access for old Sun SPARCs.
Olivier DANET [Wed, 10 Jul 2013 20:56:10 +0000 (13:56 -0700)]
sparc32: vm_area_struct access for old Sun SPARCs.

commit 961246b4ed8da3bcf4ee1eb9147f341013553e3c upstream.

Commit e4c6bfd2d79d063017ab19a18915f0bc759f32d9 ("mm: rearrange
vm_area_struct for fewer cache misses") changed the layout of the
vm_area_struct structure, it broke several SPARC32 assembly routines
which used numerical constants for accessing the vm_mm field.

This patch defines the VMA_VM_MM constant to replace the immediate values.

Signed-off-by: Olivier DANET <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agovlan: fix a race in egress prio management
Eric Dumazet [Thu, 18 Jul 2013 16:35:10 +0000 (09:35 -0700)]
vlan: fix a race in egress prio management

[ Upstream commit 3e3aac497513c669e1c62c71e1d552ea85c1d974 ]

egress_priority_map[] hash table updates are protected by rtnl,
and we never remove elements until device is dismantled.

We have to make sure that before inserting an new element in hash table,
all its fields are committed to memory or else another cpu could
find corrupt values and crash.

Signed-off-by: Eric Dumazet <>
Cc: Patrick McHardy <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoatl1e: unmap partially mapped skb on dma error and free skb
Neil Horman [Tue, 16 Jul 2013 14:49:41 +0000 (10:49 -0400)]
atl1e: unmap partially mapped skb on dma error and free skb

[ Upstream commit 584ec4355355ffac43571b02a314d43eb2f7fcbf ]

Ben Hutchings pointed out that my recent update to atl1e
in commit 352900b583b2852152a1e05ea0e8b579292e731e
("atl1e: fix dma mapping warnings") was missing a bit of code.

Specifically it reset the hardware tx ring to its origional state when
we hit a dma error, but didn't unmap any exiting mappings from the
operation.  This patch fixes that up.  It also remembers to free the
skb in the event that an error occurs, so we don't leak.  Untested, as
I don't have hardware.  I think its pretty straightforward, but please
review closely.

Signed-off-by: Neil Horman <>
CC: Ben Hutchings <>
CC: Jay Cliburn <>
CC: Chris Snook <>
CC: "David S. Miller" <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoatl1e: fix dma mapping warnings
Neil Horman [Fri, 12 Jul 2013 14:58:48 +0000 (10:58 -0400)]
atl1e: fix dma mapping warnings

[ Upstream commit 352900b583b2852152a1e05ea0e8b579292e731e ]

Recently had this backtrace reported:
WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930()
Hardware name: System Product Name
ATL1E 0000:02:00.0: DMA-API: device driver failed to check map error[device
address=0x00000000cbfd1000] [size=90 bytes] [mapped as single]
Modules linked in: xt_conntrack nf_conntrack ebtable_filter ebtables
ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek iTCO_wdt
iTCO_vendor_support snd_hda_intel acpi_cpufreq mperf coretemp btrfs zlib_deflate
snd_hda_codec snd_hwdep microcode raid6_pq libcrc32c snd_seq usblp serio_raw xor
snd_seq_device joydev snd_pcm snd_page_alloc snd_timer snd lpc_ich i2c_i801
soundcore mfd_core atl1e asus_atk0110 ata_generic pata_acpi radeon i2c_algo_bit
drm_kms_helper ttm drm i2c_core pata_marvell uinput
Pid: 314, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.3.fc19.x86_64 #1
Call Trace:
 <IRQ>  [<ffffffff81069106>] warn_slowpath_common+0x66/0x80
 [<ffffffff8106916c>] warn_slowpath_fmt+0x4c/0x50
 [<ffffffff8138151d>] check_unmap+0x47d/0x930
 [<ffffffff810ad048>] ? sched_clock_cpu+0xa8/0x100
 [<ffffffff81381a2f>] debug_dma_unmap_page+0x5f/0x70
 [<ffffffff8137ce30>] ? unmap_single+0x20/0x30
 [<ffffffffa01569a1>] atl1e_intr+0x3a1/0x5b0 [atl1e]
 [<ffffffff810d53fd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff81119636>] handle_irq_event_percpu+0x56/0x390
 [<ffffffff811199ad>] handle_irq_event+0x3d/0x60
 [<ffffffff8111cb6a>] handle_fasteoi_irq+0x5a/0x100
 [<ffffffff8101c36f>] handle_irq+0xbf/0x150
 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50
 [<ffffffff81073b10>] ? irq_enter+0x50/0xa0
 [<ffffffff8172738d>] do_IRQ+0x4d/0xc0
 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50
 [<ffffffff8171c6b2>] common_interrupt+0x72/0x72
 <EOI>  [<ffffffff810db5b2>] ? lock_release+0xc2/0x310
 [<ffffffff8109ea04>] lg_local_unlock_cpu+0x24/0x50
 [<ffffffff811dcb2f>] file_sb_list_del+0x3f/0x50
 [<ffffffff811dcb6d>] fput+0x2d/0xc0
 [<ffffffff811d8ea1>] filp_close+0x61/0x90
 [<ffffffff811fae4d>] __close_fd+0x8d/0x150
 [<ffffffff811d8ef0>] sys_close+0x20/0x50
 [<ffffffff81725699>] system_call_fastpath+0x16/0x1b

The usual straighforward failure to check for dma_mapping_error after a map
operation is completed.

This patch should fix it, the reporter wandered off after filing this bz:

and I don't have hardware to test, but the fix is pretty straightforward, so I
figured I'd post it for review.

Signed-off-by: Neil Horman <>
CC: Jay Cliburn <>
CC: Chris Snook <>
CC: "David S. Miller" <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoifb: fix oops when loading the ifb failed
dingtianhong [Thu, 11 Jul 2013 11:04:06 +0000 (19:04 +0800)]
ifb: fix oops when loading the ifb failed

[ Upstream commit f2966cd5691058b8674a20766525bedeaea9cbcf ]

If __rtnl_link_register() return faild when loading the ifb, it will
take the wrong path and get oops, so fix it just like dummy.

Signed-off-by: Ding Tianhong <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agodummy: fix oops when loading the dummy failed
dingtianhong [Thu, 11 Jul 2013 11:04:02 +0000 (19:04 +0800)]
dummy: fix oops when loading the dummy failed

[ Upstream commit 2c8a01894a12665d8059fad8f0a293c98a264121 ]

We rename the dummy in modprobe.conf like this:

install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy
install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy

We got oops when we run the command:

modprobe dummy0
modprobe dummy1

------------[ cut here ]------------

[ 3302.187584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 3302.195411] IP: [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.201844] PGD 85c94a067 PUD 8517bd067 PMD 0
[ 3302.206305] Oops: 0002 [#1] SMP
[ 3302.299737] task: ffff88105ccea300 ti: ffff880eba4a0000 task.ti: ffff880eba4a0000
[ 3302.307186] RIP: 0010:[<ffffffff813fe62a>]  [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.316044] RSP: 0018:ffff880eba4a1dd8  EFLAGS: 00010246
[ 3302.321332] RAX: 0000000000000000 RBX: ffffffff81a9d738 RCX: 0000000000000002
[ 3302.328436] RDX: 0000000000000000 RSI: ffffffffa04d602c RDI: ffff880eba4a1dd8
[ 3302.335541] RBP: ffff880eba4a1e18 R08: dead000000200200 R09: dead000000100100
[ 3302.342644] R10: 0000000000000080 R11: 0000000000000003 R12: ffffffff81a9d788
[ 3302.349748] R13: ffffffffa04d7020 R14: ffffffff81a9d670 R15: ffff880eba4a1dd8
[ 3302.364910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3302.370630] CR2: 0000000000000008 CR3: 000000085e15e000 CR4: 00000000000427e0
[ 3302.377734] DR0: 0000000000000003 DR1: 00000000000000b0 DR2: 0000000000000001
[ 3302.384838] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3302.391940] Stack:
[ 3302.393944]  ffff880eba4a1dd8 ffff880eba4a1dd8 ffff880eba4a1e18 ffffffffa04d70c0
[ 3302.401350]  00000000ffffffef ffffffffa01a8000 0000000000000000 ffffffff816111c8
[ 3302.408758]  ffff880eba4a1e48 ffffffffa01a80be ffff880eba4a1e48 ffffffffa04d70c0
[ 3302.416164] Call Trace:
[ 3302.418605]  [<ffffffffa01a8000>] ? 0xffffffffa01a7fff
[ 3302.423727]  [<ffffffffa01a80be>] dummy_init_module+0xbe/0x1000 [dummy0]
[ 3302.430405]  [<ffffffffa01a8000>] ? 0xffffffffa01a7fff
[ 3302.435535]  [<ffffffff81000322>] do_one_initcall+0x152/0x1b0
[ 3302.441263]  [<ffffffff810ab24b>] do_init_module+0x7b/0x200
[ 3302.446824]  [<ffffffff810ad3d2>] load_module+0x4e2/0x530
[ 3302.452215]  [<ffffffff8127ae40>] ? ddebug_dyndbg_boot_param_cb+0x60/0x60
[ 3302.458979]  [<ffffffff810ad5f1>] SyS_init_module+0xd1/0x130
[ 3302.464627]  [<ffffffff814b9652>] system_call_fastpath+0x16/0x1b
[ 3302.490090] RIP  [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.496607]  RSP <ffff880eba4a1dd8>
[ 3302.500084] CR2: 0000000000000008
[ 3302.503466] ---[ end trace 8342d49cd49f78ed ]---

The reason is that when loading dummy, if __rtnl_link_register() return failed,
the init_module should return and avoid take the wrong path.

Signed-off-by: Tan Xiaojun <>
Signed-off-by: Ding Tianhong <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years ago9p: fix off by one causing access violations and memory corruption
Sasha Levin [Thu, 11 Jul 2013 17:16:54 +0000 (13:16 -0400)]
9p: fix off by one causing access violations and memory corruption

[ Upstream commit 110ecd69a9feea82a152bbf9b12aba57e6396883 ]

p9_release_pages() would attempt to dereference one value past the end of
pages[]. This would cause the following crashes:

[ 6293.171817] BUG: unable to handle kernel paging request at ffff8807c96f3000
[ 6293.174146] IP: [<ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.176447] PGD 79c5067 PUD 82c1e3067 PMD 82c197067 PTE 80000007c96f3060
[ 6293.180060] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 6293.180060] Modules linked in:
[ 6293.180060] CPU: 62 PID: 174043 Comm: modprobe Tainted: G        W    3.10.0-next-20130710-sasha #3954
[ 6293.180060] task: ffff8807b803b000 ti: ffff880787dde000 task.ti: ffff880787dde000
[ 6293.180060] RIP: 0010:[<ffffffff8412793b>]  [<ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.214316] RSP: 0000:ffff880787ddfc28  EFLAGS: 00010202
[ 6293.214316] RAX: 0000000000000001 RBX: ffff8807c96f2ff8 RCX: 0000000000000000
[ 6293.222017] RDX: ffff8807b803b000 RSI: 0000000000000001 RDI: ffffea001c7e3d40
[ 6293.222017] RBP: ffff880787ddfc48 R08: 0000000000000000 R09: 0000000000000000
[ 6293.222017] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001
[ 6293.222017] R13: 0000000000000001 R14: ffff8807cc50c070 R15: ffff8807cc50c070
[ 6293.222017] FS:  00007f572641d700(0000) GS:ffff8807f3600000(0000) knlGS:0000000000000000
[ 6293.256784] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 6293.256784] CR2: ffff8807c96f3000 CR3: 00000007c8e81000 CR4: 00000000000006e0
[ 6293.256784] Stack:
[ 6293.256784]  ffff880787ddfcc8 ffff880787ddfcc8 0000000000000000 ffff880787ddfcc8
[ 6293.256784]  ffff880787ddfd48 ffffffff84128be8 ffff880700000002 0000000000000001
[ 6293.256784]  ffff8807b803b000 ffff880787ddfce0 0000100000000000 0000000000000000
[ 6293.256784] Call Trace:
[ 6293.256784]  [<ffffffff84128be8>] p9_virtio_zc_request+0x598/0x630
[ 6293.256784]  [<ffffffff8115c610>] ? wake_up_bit+0x40/0x40
[ 6293.256784]  [<ffffffff841209b1>] p9_client_zc_rpc+0x111/0x3a0
[ 6293.256784]  [<ffffffff81174b78>] ? sched_clock_cpu+0x108/0x120
[ 6293.256784]  [<ffffffff84122a21>] p9_client_read+0xe1/0x2c0
[ 6293.256784]  [<ffffffff81708a90>] v9fs_file_read+0x90/0xc0
[ 6293.256784]  [<ffffffff812bd073>] vfs_read+0xc3/0x130
[ 6293.256784]  [<ffffffff811a78bd>] ? trace_hardirqs_on+0xd/0x10
[ 6293.256784]  [<ffffffff812bd5a2>] SyS_read+0x62/0xa0
[ 6293.256784]  [<ffffffff841a1a00>] tracesys+0xdd/0xe2
[ 6293.256784] Code: 66 90 48 89 fb 41 89 f5 48 8b 3f 48 85 ff 74 29 85 f6 74 25 45 31 e4 66 0f 1f 84 00 00 00 00 00 e8 eb 14 12 fd 41 ff c4 49 63 c4 <48> 8b 3c c3 48 85 ff 74 05 45 39 e5 75 e7 48 83 c4 08 5b 41 5c
[ 6293.256784] RIP  [<ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.256784]  RSP <ffff880787ddfc28>
[ 6293.256784] CR2: ffff8807c96f3000
[ 6293.256784] ---[ end trace 50822ee72cd360fc ]---

Signed-off-by: Sasha Levin <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agomacvtap: correctly linearize skb when zerocopy is used
Jason Wang [Wed, 10 Jul 2013 05:43:28 +0000 (13:43 +0800)]
macvtap: correctly linearize skb when zerocopy is used

[ Upstream commit 61d46bf979d5cd7c164709a80ad5676a35494aae ]

Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to
linearize parts of the skb to let the rest of iov to be fit in
the frags, we need count copylen into linear when calling macvtap_alloc_skb()
instead of partly counting it into data_len. Since this breaks
zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should
be zero at beginning. This cause nr_frags to be increased wrongly without
setting the correct frags.

This bug were introduced from b92946e2919134ebe2a4083e4302236295ea2a73
(macvtap: zerocopy: validate vectors before building skb).

Cc: Michael S. Tsirkin <>
Signed-off-by: Jason Wang <>
Acked-by: Michael S. Tsirkin <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoifb: fix rcu_sched self-detected stalls
dingtianhong [Wed, 10 Jul 2013 04:04:02 +0000 (12:04 +0800)]
ifb: fix rcu_sched self-detected stalls

[ Upstream commit 440d57bc5ff55ec1efb3efc9cbe9420b4bbdfefa ]

According to the commit 16b0dc29c1af9df341428f4c49ada4f626258082
(dummy: fix rcu_sched self-detected stalls)

Eric Dumazet fix the problem in dummy, but the ifb will occur the
same problem like the dummy modules.

Trying to "modprobe ifb numifbs=30000" triggers :

INFO: rcu_sched self-detected stall on CPU

After this splat, RTNL is locked and reboot is needed.

We must call cond_resched() to avoid this, even holding RTNL.

Signed-off-by: Ding Tianhong <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agosunvnet: vnet_port_remove must call unregister_netdev
Dave Kleikamp [Mon, 1 Jul 2013 21:49:22 +0000 (16:49 -0500)]
sunvnet: vnet_port_remove must call unregister_netdev

[ Upstream commit aabb9875d02559ab9b928cd6f259a5cc4c21a589 ]

The missing call to unregister_netdev() leaves the interface active
after the driver is unloaded by rmmod.

Signed-off-by: Dave Kleikamp <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size
Hannes Frederic Sowa [Tue, 2 Jul 2013 06:04:05 +0000 (08:04 +0200)]
ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size

[ Upstream commit 75a493e60ac4bbe2e977e7129d6d8cbb0dd236be ]

If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track
of this when appending the second frame on a corked socket. This results
in the following splat:

[37598.993962] ------------[ cut here ]------------
[37598.994008] kernel BUG at net/core/skbuff.c:2064!
[37598.994008] invalid opcode: 0000 [#1] SMP
[37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
+nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
+scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm
[37598.994008]  snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc
+dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
[37598.994008] CPU 0
[37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG
[37598.994008] RIP: 0010:[<ffffffff815443a5>]  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008] RSP: 0018:ffff88003670da18  EFLAGS: 00010202
[37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0
[37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00
[37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040
[37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8
[37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000
[37598.994008] FS:  00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
[37598.994008] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0
[37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0)
[37598.994008] Stack:
[37598.994008]  ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8
[37598.994008]  ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200
[37598.994008]  0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4
[37598.994008] Call Trace:
[37598.994008]  [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0
[37598.994008]  [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0
[37598.994008]  [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40
[37598.994008]  [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10
[37598.994008]  [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90
[37598.994008]  [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0
[37598.994008]  [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30
[37598.994008]  [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0
[37598.994008]  [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0
[37598.994008]  [<ffffffff8153d97d>] sys_sendto+0x12d/0x180
[37598.994008]  [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0
[37598.994008]  [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240
[37598.994008]  [<ffffffff8166a7e7>] tracesys+0xdd/0xe2
[37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48
[37598.994008] RIP  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008]  RSP <ffff88003670da18>
[37599.007323] ---[ end trace d69f6a17f8ac8eee ]---

While there, also check if path mtu discovery is activated for this
socket. The logic was adapted from ip6_append_data when first writing
on the corked socket.

This bug was introduced with commit
0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec

b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao
   feng, thanks!).
c) Change mtu to unsigned int, else we get a warning about
   non-matching types because of the min()-macro type-check.

Acked-by: Gao feng <>
Cc: YOSHIFUJI Hideaki <>
Signed-off-by: Hannes Frederic Sowa <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data
Hannes Frederic Sowa [Mon, 1 Jul 2013 18:21:30 +0000 (20:21 +0200)]
ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data

[ Upstream commit 8822b64a0fa64a5dd1dfcf837c5b0be83f8c05d1 ]

We accidentally call down to ip6_push_pending_frames when uncorking
pending AF_INET data on a ipv6 socket. This results in the following
splat (from Dave Jones):

skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:126!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth
+netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c
CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37
task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000
RIP: 0010:[<ffffffff816e759c>]  [<ffffffff816e759c>] skb_panic+0x63/0x65
RSP: 0018:ffff8801e6431de8  EFLAGS: 00010282
RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006
RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520
RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800
R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800
FS:  00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
 ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4
 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6
 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0
Call Trace:
 [<ffffffff8159a9aa>] skb_push+0x3a/0x40
 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0
 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140
 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0
 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20
 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0
 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0
 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40
 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20
 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0
 [<ffffffff816f5d54>] tracesys+0xdd/0xe2
Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55
RIP  [<ffffffff816e759c>] skb_panic+0x63/0x65
 RSP <ffff8801e6431de8>

This patch adds a check if the pending data is of address family AF_INET
and directly calls udp_push_ending_frames from udp_v6_push_pending_frames
if that is the case.

This bug was found by Dave Jones with trinity.

(Also move the initialization of fl6 below the AF_INET check, even if
not strictly necessary.)

Cc: Dave Jones <>
Cc: YOSHIFUJI Hideaki <>
Signed-off-by: Hannes Frederic Sowa <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agol2tp: add missing .owner to struct pppox_proto
Wei Yongjun [Tue, 2 Jul 2013 01:02:07 +0000 (09:02 +0800)]
l2tp: add missing .owner to struct pppox_proto

[ Upstream commit e1558a93b61962710733dc8c11a2bc765607f1cd ]

Add missing .owner of struct pppox_proto. This prevents the
module from being removed from underneath its users.

Signed-off-by: Wei Yongjun <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoipv6,mcast: always hold idev->lock before mca_lock
Amerigo Wang [Sat, 29 Jun 2013 13:30:49 +0000 (21:30 +0800)]
ipv6,mcast: always hold idev->lock before mca_lock

[ Upstream commit 8965779d2c0e6ab246c82a405236b1fb2adae6b2, with
  some bits from commit b7b1bfce0bb68bd8f6e62a28295922785cc63781
  ("ipv6: split duplicate address detection and router solicitation timer")
  to get the __ipv6_get_lladdr() used by this patch. ]

dingtianhong reported the following deadlock detected by lockdep:

 [ INFO: possible circular locking dependency detected ] #1 Not tainted
 ksoftirqd/0/3 is trying to acquire lock:
  (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120

 but task is already holding lock:
  (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mc->mca_lock){+.+...}:
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60
        [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120
        [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60
        [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80
        [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0
        [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80
        [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20
        [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60
        [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80
        [<ffffffff813d9360>] dev_change_flags+0x40/0x70
        [<ffffffff813ea627>] do_setlink+0x237/0x8a0
        [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600
        [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310
        [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0
        [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40
        [<ffffffff81403e20>] netlink_unicast+0x140/0x180
        [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380
        [<ffffffff813c4252>] sock_sendmsg+0x112/0x130
        [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460
        [<ffffffff813c5544>] sys_sendmsg+0x44/0x70
        [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b

 -> #0 (&ndev->lock){+.+...}:
        [<ffffffff810a798e>] check_prev_add+0x3de/0x440
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f6c82>] rt_read_lock+0x42/0x60
        [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120
        [<ffffffff8149b036>] mld_newpack+0xb6/0x160
        [<ffffffff8149b18b>] add_grhead+0xab/0xc0
        [<ffffffff8149d03b>] add_grec+0x3ab/0x460
        [<ffffffff8149d14a>] mld_send_report+0x5a/0x150
        [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0
        [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0
        [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0
        [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0
        [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0
        [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210
        [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0
        [<ffffffff8106c7de>] kthread+0xae/0xc0
        [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10

actually we can just hold idev->lock before taking pmc->mca_lock,
and avoid taking idev->lock again when iterating idev->addr_list,
since the upper callers of mld_newpack() already take

Reported-by: dingtianhong <>
Cc: dingtianhong <>
Cc: Hideaki YOSHIFUJI <>
Cc: David S. Miller <>
Cc: Hannes Frederic Sowa <>
Tested-by: Ding Tianhong <>
Tested-by: Chen Weilong <>
Signed-off-by: Cong Wang <>
Acked-by: Hannes Frederic Sowa <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agonet: Swap ver and type in pppoe_hdr
Changli Gao [Fri, 28 Jun 2013 16:15:51 +0000 (00:15 +0800)]
net: Swap ver and type in pppoe_hdr

[ Upstream commit b1a5a34bd0b8767ea689e68f8ea513e9710b671e ]

Ver and type in pppoe_hdr should be swapped as defined by RFC2516

Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agox25: Fix broken locking in ioctl error paths.
Dave Jones [Fri, 28 Jun 2013 16:13:52 +0000 (12:13 -0400)]
x25: Fix broken locking in ioctl error paths.

[ Upstream commit 4ccb93ce7439b63c31bc7597bfffd13567fa483d ]

Two of the x25 ioctl cases have error paths that break out of the function without
unlocking the socket, leading to this warning:

[ BUG: lock held when returning to user space! ]
3.10.0-rc7+ #36 Not tainted
trinity-child2/31407 is leaving the kernel with locks still held!
1 lock held by trinity-child2/31407:
 #0:  (sk_lock-AF_X25){+.+.+.}, at: [<ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25]

Signed-off-by: Dave Jones <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoneighbour: fix a race in neigh_destroy()
Eric Dumazet [Fri, 28 Jun 2013 09:37:42 +0000 (02:37 -0700)]
neighbour: fix a race in neigh_destroy()

[ Upstream commit c9ab4d85de222f3390c67aedc9c18a50e767531e ]

There is a race in neighbour code, because neigh_destroy() uses
skb_queue_purge(&neigh->arp_queue) without holding neighbour lock,
while other parts of the code assume neighbour rwlock is what
protects arp_queue

Convert all skb_queue_purge() calls to the __skb_queue_purge() variant

Use __skb_queue_head_init() instead of skb_queue_head_init()
to make clear we do not use arp_queue.lock

And hold neigh->lock in neigh_destroy() to close the race.

Reported-by: Joe Jin <>
Signed-off-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agosh_eth: fix unhandled RFE interrupt
Sergei Shtylyov [Thu, 20 Jun 2013 21:12:21 +0000 (01:12 +0400)]
sh_eth: fix unhandled RFE interrupt

[ Upstream commit ca8c35852138ee0585eaffe6b9f10a5261ea7771 ]

EESR.RFE (receive FIFO overflow) interrupt is enabled by the driver on all SoCs
and sh_eth_error() handles it but it's not present in any initializer/assignment
of the 'eesr_err_check' field of 'struct sh_eth_cpu_data'. This leads to that
interrupt not being handled and cleared, and finally to disabling IRQ and the
driver being non-functional.

Modify DEFAULT_EESR_ERR_CHECK macro and all explicit initializers of the above
mentioned field to contain the EESR.RFE bit. Remove useless backslashes from the
initializers, while at it.

Signed-off-by: Sergei Shtylyov <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoaf_key: fix info leaks in notify messages
Mathias Krause [Wed, 26 Jun 2013 21:52:30 +0000 (23:52 +0200)]
af_key: fix info leaks in notify messages

[ Upstream commit a5cc68f3d63306d0d288f31edfc2ae6ef8ecd887 ]

key_notify_sa_flush() and key_notify_policy_flush() miss to initialize
the sadb_msg_reserved member of the broadcasted message and thereby
leak 2 bytes of heap memory to listeners. Fix that.

Signed-off-by: Mathias Krause <>
Cc: Steffen Klassert <>
Cc: "David S. Miller" <>
Cc: Herbert Xu <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoipv6: ip6_sk_dst_check() must not assume ipv6 dst
Eric Dumazet [Wed, 26 Jun 2013 11:15:07 +0000 (04:15 -0700)]
ipv6: ip6_sk_dst_check() must not assume ipv6 dst

[ Upstream commit a963a37d384d71ad43b3e9e79d68d42fbe0901f3 ]

It's possible to use AF_INET6 sockets and to connect to an IPv4
destination. After this, socket dst cache is a pointer to a rtable,
not rt6_info.

ip6_sk_dst_check() should check the socket dst cache is IPv6, or else
various corruptions/crashes can happen.

Dave Jones can reproduce immediate crash with
trinity -q -l off -n -c sendmsg -c connect

With help from Hannes Frederic Sowa

Reported-by: Dave Jones <>
Reported-by: Hannes Frederic Sowa <>
Signed-off-by: Eric Dumazet <>
Acked-by: Hannes Frederic Sowa <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agomacvtap: fix recovery from gup errors
Michael S. Tsirkin [Sun, 23 Jun 2013 14:26:58 +0000 (17:26 +0300)]
macvtap: fix recovery from gup errors

[ Upstream commit 4c7ab054ab4f5d63625508ed6f8a607184cae7c2 ]

get user pages might fail partially in macvtap zero copy
mode. To recover we need to put all pages that we got,
but code used a wrong index resulting in double-free

Reported-by: Brad Hubbard <>
Signed-off-by: Michael S. Tsirkin <>
Acked-by: Jason Wang <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoipv6: don't call addrconf_dst_alloc again when enable lo
Gao feng [Sun, 16 Jun 2013 03:14:30 +0000 (11:14 +0800)]
ipv6: don't call addrconf_dst_alloc again when enable lo

[ Upstream commit a881ae1f625c599b460cc8f8a7fcb1c438f699ad ]

If we disable all of the net interfaces, and enable
un-lo interface before lo interface, we already allocated
the addrconf dst in ipv6_add_addr. So we shouldn't allocate
it again when we enable lo interface.

Otherwise the message below will be triggered.
unregister_netdevice: waiting for sit1 to become free. Usage count = 1

This problem is introduced by commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"

Signed-off-by: Gao feng <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agobridge: fix switched interval for MLD Query types
Linus Lüssing [Sun, 16 Jun 2013 21:20:34 +0000 (23:20 +0200)]
bridge: fix switched interval for MLD Query types

[ Upstream commit 32de868cbc6bee010d2cee95b5071b25ecbec8c3 ]

General Queries (the one with the Multicast Address field
set to zero / '::') are supposed to have a Maximum Response Delay
of [Query Response Interval], while for Multicast-Address-Specific
Queries it is [Last Listener Query Interval] - not the other way
round. (see RFC2710, section 7.3+7.8)

Signed-off-by: Linus Lüssing <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoLinux 3.2.49 v3.2.49
Ben Hutchings [Sat, 27 Jul 2013 04:34:36 +0000 (05:34 +0100)]
Linux 3.2.49

9 years agoMAINTAINERS: add stable_kernel_rules.txt to stable maintainer information
Greg Kroah-Hartman [Tue, 18 Jun 2013 19:58:12 +0000 (12:58 -0700)]
MAINTAINERS: add stable_kernel_rules.txt to stable maintainer information

commit 7b175c46720f8e6b92801bb634c93d1016f80c62 upstream.

This hopefully will help point developers to the proper way that patches
should be submitted for inclusion in the stable kernel releases.

Reported-by: David Howells <>
Acked-by: David Howells <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
9 years agoMAINTAINERS: Greg's suse email address is dead
Greg KH [Wed, 1 Feb 2012 04:02:00 +0000 (20:02 -0800)]
MAINTAINERS: Greg's suse email address is dead

commit 879a5a001b62a020e074d460b3a7c0fd993f9832 upstream.

My email address has changed, the one is now dead, so update all
of my MAINTAINER entries with the correct one so that patches don't get

Also change the status of some of my entries as I'm supposed to be doing
this stuff now for real.

Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
9 years agoext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs
Jan Kara [Fri, 31 May 2013 23:38:56 +0000 (19:38 -0400)]
ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs

commit a60697f411eb365fb09e639e6f183fe33d1eb796 upstream.

On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before

Signed-off-by: Jan Kara <>
Signed-off-by: Theodore Ts'o <>
Signed-off-by: Ben Hutchings <>
9 years agoext4: fix overflow when counting used blocks on 32-bit architectures
Jan Kara [Fri, 31 May 2013 23:39:56 +0000 (19:39 -0400)]
ext4: fix overflow when counting used blocks on 32-bit architectures

commit 8af8eecc1331dbf5e8c662022272cf667e213da5 upstream.

The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).

Signed-off-by: Jan Kara <>
Signed-off-by: Theodore Ts'o <>
Signed-off-by: Ben Hutchings <>
9 years agodrivers/cdrom/cdrom.c: use kzalloc() for failing hardware
Jonathan Salwan [Wed, 3 Jul 2013 22:01:13 +0000 (15:01 -0700)]
drivers/cdrom/cdrom.c: use kzalloc() for failing hardware

commit 542db01579fbb7ea7d1f7bb9ddcef1559df660b2 upstream.

In drivers/cdrom/cdrom.c mmc_ioctl_cdrom_read_data() allocates a memory
area with kmalloc in line 2885.

  2885         cgc->buffer = kmalloc(blocksize, GFP_KERNEL);
  2886         if (cgc->buffer == NULL)
  2887                 return -ENOMEM;

In line 2908 we can find the copy_to_user function:

  2908         if (!ret && copy_to_user(arg, cgc->buffer, blocksize))

The cgc->buffer is never cleaned and initialized before this function.
If ret = 0 with the previous basic block, it's possible to display some
memory bytes in kernel space from userspace.

When we read a block from the disk it normally fills the ->buffer but if
the drive is malfunctioning there is a chance that it would only be
partially filled.  The result is an leak information to userspace.

Signed-off-by: Dan Carpenter <>
Cc: Jens Axboe <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
9 years agopch_uart: fix a deadlock when pch_uart as console
Liang Li [Sat, 19 Jan 2013 09:52:10 +0000 (17:52 +0800)]
pch_uart: fix a deadlock when pch_uart as console

commit 384e301e3519599b000c1a2ecd938b533fc15d85 upstream.

When we use pch_uart as system console like 'console=ttyPCH0,115200',
then 'send break' to it. We'll encounter the deadlock on a cpu/core,
with interrupts disabled on the core. When we happen to have all irqs
affinity to cpu0 then the deadlock on cpu0 actually deadlock whole

In pch_uart_interrupt, we have spin_lock_irqsave(&priv->lock, flags)
then call pch_uart_err_ir when break is received. Then the call to
dev_err would actually call to pch_console_write then we'll run into
another spin_lock(&priv->lock), with interrupts disabled.

So in the call sequence lead by pch_uart_interrupt, we should be
carefully to call functions that will 'print message to console' only
in case the uart port is not being used as serial console.

Signed-off-by: Liang Li <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
9 years agoperf: Fix mmap() accounting hole
Peter Zijlstra [Tue, 4 Jun 2013 08:44:21 +0000 (10:44 +0200)]
perf: Fix mmap() accounting hole

commit 9bb5d40cd93c9dd4be74834b1dcb1ba03629716b upstream.

Vince's fuzzer once again found holes. This time it spotted a leak in
the locked page accounting.

When an event had redirected output and its close() was the last
reference to the buffer we didn't have a vm context to undo accounting.

Change the code to destroy the buffer on the last munmap() and detach
all redirected events at that time. This provides us the right context
to undo the vm accounting.

[Backporting for 3.4-stable.
VM_RESERVED flag was replaced with pair 'VM_DONTEXPAND | VM_DONTDUMP' in
314e51b9 since 3.7.0-rc1, and 314e51b9 comes from a big patchset, we didn't
backport the patchset, so I restored 'VM_DNOTEXPAND | VM_DONTDUMP' as before:
+ vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 -- zliu]

Reported-and-tested-by: Vince Weaver <>
Signed-off-by: Peter Zijlstra <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Zhouping Liu <>
Signed-off-by: Greg Kroah-Hartman <>
[bwh: Backported to 3.2: drop unrelated addition of braces in free_event()]
Signed-off-by: Ben Hutchings <>
9 years agoperf: Fix perf mmap bugs
Peter Zijlstra [Tue, 28 May 2013 08:55:48 +0000 (10:55 +0200)]
perf: Fix perf mmap bugs

commit 26cb63ad11e04047a64309362674bcbbd6a6f246 upstream.

Vince reported a problem found by his perf specific trinity

Al noticed 2 problems with perf's mmap():

 - it has issues against fork() since we use vma->vm_mm for accounting.
 - it has an rb refcount leak on double mmap().

We fix the issues against fork() by using VM_DONTCOPY; I don't
think there's code out there that uses this; we didn't hear
about weird accounting problems/crashes. If we do need this to
work, the previously proposed VM_PINNED could make this work.

Aside from the rb reference leak spotted by Al, Vince's example
prog was indeed doing a double mmap() through the use of

This exposes another problem, since we now have 2 events with
one buffer, the accounting gets screwy because we account per
event. Fix this by making the buffer responsible for its own

[Backporting for 3.4-stable.
VM_RESERVED flag was replaced with pair 'VM_DONTEXPAND | VM_DONTDUMP' in
314e51b9 since 3.7.0-rc1, and 314e51b9 comes from a big patchset, we didn't
backport the patchset, so I restored 'VM_DNOTEXPAND | VM_DONTDUMP' as before:
-       vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP;
+       vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 -- zliu]

Reported-by: Vince Weaver <>
Signed-off-by: Peter Zijlstra <>
Cc: Al Viro <>
Cc: Paul Mackerras <>
Cc: Arnaldo Carvalho de Melo <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Zhouping Liu <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
9 years agoceph: fix statvfs fr_size
Sage Weil [Fri, 22 Feb 2013 23:31:00 +0000 (15:31 -0800)]
ceph: fix statvfs fr_size

commit 92a49fb0f79f3300e6e50ddf56238e70678e4202 upstream.

Different versions of glibc are broken in different ways, but the short of
it is that for the time being, frsize should == bsize, and be used as the
multiple for the blocks, free, and available fields.  This mirrors what is
done for NFS.  The previous reporting of the page size for frsize meant
that newer glibc and df would report a very small value for the fs size.


Signed-off-by: Sage Weil <>
Reviewed-by: Greg Farnum <>
Signed-off-by: Ben Hutchings <>
9 years agoperf: Fix perf_lock_task_context() vs RCU
Peter Zijlstra [Fri, 12 Jul 2013 09:08:33 +0000 (11:08 +0200)]
perf: Fix perf_lock_task_context() vs RCU

commit 058ebd0eba3aff16b144eabf4510ed9510e1416e upstream.

Jiri managed to trigger this warning:

 [] ======================================================
 [] [ INFO: possible circular locking dependency detected ]
 [] 3.10.0+ #228 Tainted: G        W
 [] -------------------------------------------------------
 [] p/6613 is trying to acquire lock:
 []  (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250
 [] but task is already holding lock:
 []  (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0
 [] which lock already depends on the new lock.
 [] the existing dependency chain (in reverse order) is:
 [] -> #4 (&ctx->lock){-.-...}:
 [] -> #3 (&rq->lock){-.-.-.}:
 [] -> #2 (&p->pi_lock){-.-.-.}:
 [] -> #1 (&rnp->nocb_gp_wq[1]){......}:
 [] -> #0 (rcu_node_0){..-...}:

Paul was quick to explain that due to preemptible RCU we cannot call
rcu_read_unlock() while holding scheduler (or nested) locks when part
of the read side critical section was preemptible.

Therefore solve it by making the entire RCU read side non-preemptible.

Also pull out the retry from under the non-preempt to play nice with RT.

Reported-by: Jiri Olsa <>
Helped-out-by: Paul E. McKenney <>
Signed-off-by: Peter Zijlstra <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Ben Hutchings <>
9 years agoperf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario
Jiri Olsa [Tue, 9 Jul 2013 15:44:11 +0000 (17:44 +0200)]
perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario

commit 06f417968beac6e6b614e17b37d347aa6a6b1d30 upstream.

The '!ctx->is_active' check has a valid scenario, so
there's no need for the warning.

The reason is that there's a time window between the
'ctx->is_active' check in the perf_event_enable() function
and the __perf_event_enable() function having:

  - IRQs on
  - ctx->lock unlocked

where the task could be killed and 'ctx' deactivated by
perf_event_exit_task(), ending up with the warning below.

So remove the WARN_ON_ONCE() check and add comments to
explain it all.

This addresses the following warning reported by Vince Weaver:

[  324.983534] ------------[ cut here ]------------
[  324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190()
[  324.984420] Modules linked in:
[  324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246
[  324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010
[  324.984420]  0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00
[  324.984420]  ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860
[  324.984420]  0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a
[  324.984420] Call Trace:
[  324.984420]  <IRQ>  [<ffffffff8160ea0b>] dump_stack+0x19/0x1b
[  324.984420]  [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0
[  324.984420]  [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20
[  324.984420]  [<ffffffff81134437>] __perf_event_enable+0x187/0x190
[  324.984420]  [<ffffffff81130030>] remote_function+0x40/0x50
[  324.984420]  [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130
[  324.984420]  [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40
[  324.984420]  [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80
[  324.984420]  <EOI>  [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70
[  324.984420]  [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210
[  324.984420]  [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60
[  324.984420]  [<ffffffff81086946>] do_exit+0x2b6/0xa40
[  324.984420]  [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30
[  324.984420]  [<ffffffff81087279>] do_group_exit+0x49/0xc0
[  324.984420]  [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620
[  324.984420]  [<ffffffff81043057>] do_signal+0x57/0x5a0
[  324.984420]  [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0
[  324.984420]  [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe
[  324.984420]  [<ffffffff816166cd>] ? retint_signal+0x11/0x84
[  324.984420]  [<ffffffff81043605>] do_notify_resume+0x65/0x80
[  324.984420]  [<ffffffff81616702>] retint_signal+0x46/0x84
[  324.984420] ---[ end trace 442ec2f04db3771a ]---

Reported-by: Vince Weaver <>
Signed-off-by: Jiri Olsa <>
Suggested-by: Peter Zijlstra <>
Cc: Corey Ashford <>
Cc: Frederic Weisbecker <>
Cc: Ingo Molnar <>
Cc: Namhyung Kim <>
Cc: Paul Mackerras <>
Cc: Arnaldo Carvalho de Melo <>
Signed-off-by: Peter Zijlstra <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Ben Hutchings <>
9 years agoperf: Clone child context from parent context pmu
Jiri Olsa [Tue, 9 Jul 2013 15:44:10 +0000 (17:44 +0200)]
perf: Clone child context from parent context pmu

commit 734df5ab549ca44f40de0f07af1c8803856dfb18 upstream.

Currently when the child context for inherited events is
created, it's based on the pmu object of the first event
of the parent context.

This is wrong for the following scenario:

  - HW context having HW and SW event
  - HW event got removed (closed)
  - SW event stays in HW context as the only event
    and its pmu is used to clone the child context

The issue starts when the cpu context object is touched
based on the pmu context object (__get_cpu_context). In
this case the HW context will work with SW cpu context
ending up with following WARN below.

Fixing this by using parent context pmu object to clone
from child context.

Addresses the following warning reported by Vince Weaver:

[ 2716.472065] ------------[ cut here ]------------
[ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x)
[ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn
[ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2
[ 2716.476035] Hardware name: AOpen   DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2
[ 2716.476035]  0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18
[ 2716.476035]  ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad
[ 2716.476035]  ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550
[ 2716.476035] Call Trace:
[ 2716.476035]  [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70
[ 2716.476035]  [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f
[ 2716.476035]  [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194
[ 2716.476035]  [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c
[ 2716.476035]  [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394
[ 2716.476035]  [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98
[ 2716.476035]  [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad
[ 2716.476035]  [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1
[ 2716.476035]  [<ffffffff8100205d>] ? do_signal+0x3c/0x432
[ 2716.476035]  [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141
[ 2716.476035]  [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90
[ 2716.476035]  [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118
[ 2716.476035]  [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c
[ 2716.476035]  [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6
[ 2716.476035]  [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d
[ 2716.476035]  [<ffffffff813654f5>] ? retint_signal+0x3d/0x78
[ 2716.476035] ---[ end trace 827178d8a5966c3d ]---

Reported-by: Vince Weaver <>
Signed-off-by: Jiri Olsa <>
Cc: Corey Ashford <>
Cc: Frederic Weisbecker <>
Cc: Ingo Molnar <>
Cc: Namhyung Kim <>
Cc: Paul Mackerras <>
Cc: Arnaldo Carvalho de Melo <>
Signed-off-by: Peter Zijlstra <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Ben Hutchings <>
9 years agoiscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow
Jörn Engel [Wed, 3 Jul 2013 15:35:11 +0000 (11:35 -0400)]
iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow

commit 0fbfc46fb0b2f543a8b539e94c6c293ebc0b05a6 upstream.

This patch fixes a potential buffer overflow while processing
iscsi_node_auth input for configfs attributes within NodeACL
tfc_tpg_nacl_auth_cit context.

Signed-off-by: Joern Engel <>
Signed-off-by: Nicholas Bellinger <>
Signed-off-by: Ben Hutchings <>
9 years agomegaraid_sas: fix memory leak if SGL has zero length entries
Bjørn Mork [Wed, 21 Nov 2012 08:54:48 +0000 (09:54 +0100)]
megaraid_sas: fix memory leak if SGL has zero length entries

commit 7a6a731bd00ca90d0e250867c3b9c05b5ff0fa49 upstream.

commit 98cb7e44 ([SCSI] megaraid_sas: Sanity check user
supplied length before passing it to dma_alloc_coherent())
introduced a memory leak.  Memory allocated for entries
following zero length SGL entries will not be freed.


Signed-off-by: Bjørn Mork <>
Acked-by: Adam Radford <>
Signed-off-by: James Bottomley <>
Signed-off-by: Ben Hutchings <>
9 years agohpfs: better test for errors
Mikulas Patocka [Thu, 4 Jul 2013 16:42:29 +0000 (18:42 +0200)]
hpfs: better test for errors

commit 3ebacb05044f82c5f0bb456a894eb9dc57d0ed90 upstream.

The test if bitmap access is out of bound could errorneously pass if the
device size is divisible by 16384 sectors and we are asking for one bitmap
after the end.

Check for invalid size in the superblock. Invalid size could cause integer
overflows in the rest of the code.

Signed-off-by: Mikulas Patocka <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
9 years agonbd: correct disconnect behavior
Paul Clements [Wed, 3 Jul 2013 22:09:04 +0000 (15:09 -0700)]
nbd: correct disconnect behavior

commit c378f70adbc1bbecd9e6db145019f14b2f688c7c upstream.

Currently, when a disconnect is requested by the user (via NBD_DISCONNECT
ioctl) the return from NBD_DO_IT is undefined (it is usually one of
several error codes).  This means that nbd-client does not know if a
manual disconnect was performed or whether a network error occurred.
Because of this, nbd-client's persist mode (which tries to reconnect after
error, but not after manual disconnect) does not always work correctly.

This change fixes this by causing NBD_DO_IT to always return 0 if a user
requests a disconnect.  This means that nbd-client can correctly either
persist the connection (if an error occurred) or disconnect (if the user
requested it).

Signed-off-by: Paul Clements <>
Acked-by: Rob Landley <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
[bwh: Backported to 3.2: adjust device pointer name]
Signed-off-by: Ben Hutchings <>
9 years agodrivers/rtc/rtc-rv3029c2.c: fix disabling AIE irq
Axel Lin [Wed, 3 Jul 2013 22:06:45 +0000 (15:06 -0700)]
drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irq

commit 29ecd78c0fd6ee05f2c6b07b23823a6ae43c13ff upstream.

In the disable AIE irq code path, current code passes "1" to enable
parameter of rv3029c2_rtc_i2c_alarm_set_irq().  Thus it does not disable
AIE irq.

Signed-off-by: Axel Lin <>
Acked-by: Heiko Schocher <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
9 years agocrypto: sanitize argument for format string
Kees Cook [Wed, 3 Jul 2013 22:01:15 +0000 (15:01 -0700)]
crypto: sanitize argument for format string

commit 1c8fca1d92e14859159a82b8a380d220139b7344 upstream.

The template lookup interface does not provide a way to use format
strings, so make sure that the interface cannot be abused accidentally.

Signed-off-by: Kees Cook <>
Cc: Herbert Xu <>
Cc: "David S. Miller" <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
9 years agoblock: do not pass disk names as format strings
Kees Cook [Wed, 3 Jul 2013 22:01:14 +0000 (15:01 -0700)]
block: do not pass disk names as format strings

commit ffc8b30866879ed9ba62bd0a86fecdbd51cd3d19 upstream.

Disk names may contain arbitrary strings, so they must not be
interpreted as format strings.  It seems that only md allows arbitrary
strings to be used for disk names, but this could allow for a local
memory corruption from uid 0 into ring 0.


Signed-off-by: Kees Cook <>
Cc: Jens Axboe <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
[bwh: Backported to 3.2: adjust device pointer name in nbd.c]
Signed-off-by: Ben Hutchings <>
9 years agoocfs2: xattr: fix inlined xattr reflink
Junxiao Bi [Wed, 3 Jul 2013 22:01:03 +0000 (15:01 -0700)]
ocfs2: xattr: fix inlined xattr reflink

commit ef962df057aaafd714f5c22ba3de1be459571fdf upstream.

Inlined xattr shared free space of inode block with inlined data or data
extent record, so the size of the later two should be adjusted when
inlined xattr is enabled.  See ocfs2_xattr_ibody_init().  But this isn't
done well when reflink.  For inode with inlined data, its max inlined
data size is adjusted in ocfs2_duplicate_inline_data(), no problem.  But
for inode with data extent record, its record count isn't adjusted.  Fix
it, or data extent record and inlined xattr may overwrite each other,
then cause data corruption or xattr failure.

One panic caused by this bug in our test environment is the following:

  kernel BUG at fs/ocfs2/xattr.c:1435!
  invalid opcode: 0000 [#1] SMP
  Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1
  RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2]
  RSP: e02b:ffff88007a587948  EFLAGS: 00010283
  RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4
  RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68
  RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010
  R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68
  FS:  00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
  CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process multi_reflink_t
  Call Trace:
    ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2]
    ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2]
    ocfs2_xa_set+0xcc/0x250 [ocfs2]
    ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2]
    __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2]
    ocfs2_xattr_set+0x6c6/0x890 [ocfs2]
    ocfs2_xattr_user_set+0x46/0x50 [ocfs2]

Signed-off-by: Junxiao Bi <>
Reviewed-by: Jie Liu <>
Acked-by: Joel Becker <>
Cc: Mark Fasheh <>
Cc: Sunil Mushran <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
9 years agodrivers/dma/pl330.c: fix locking in pl330_free_chan_resources()
Bartlomiej Zolnierkiewicz [Wed, 3 Jul 2013 22:00:43 +0000 (15:00 -0700)]
drivers/dma/pl330.c: fix locking in pl330_free_chan_resources()

commit da331ba8e9c5de72a27e50f71105395bba6eebe0 upstream.

tasklet_kill() may sleep so call it before taking pch->lock.

Fixes following lockup:

  BUG: scheduling while atomic: cat/2383/0x00000002
  Modules linked in:
  BUG: spinlock lockup suspected on CPU#0, swapper/0/0
   lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1

Signed-off-by: Bartlomiej Zolnierkiewicz <>
Signed-off-by: Kyungmin Park <>
Acked-by: Jassi Brar <>
Cc: Vinod Koul <>
Cc: Tomasz Figa <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Ben Hutchings <>
9 years agolibceph: Fix NULL pointer dereference in auth client code
Tyler Hicks [Thu, 20 Jun 2013 20:13:59 +0000 (13:13 -0700)]
libceph: Fix NULL pointer dereference in auth client code

commit 2cb33cac622afde897aa02d3dcd9fbba8bae839e upstream.

A malicious monitor can craft an auth reply message that could cause a
NULL function pointer dereference in the client's kernel.

To prevent this, the auth_none protocol handler needs an empty
ceph_auth_client_ops->build_request() function.


Signed-off-by: Tyler Hicks <>
Reported-by: Chanam Park <>
Reviewed-by: Seth Arnold <>
Reviewed-by: Sage Weil <>
Signed-off-by: Ben Hutchings <>
9 years agotracing: Fix irqs-off tag display in syscall tracing
zhangwei(Jovi) [Wed, 10 Apr 2013 03:26:23 +0000 (11:26 +0800)]
tracing: Fix irqs-off tag display in syscall tracing

commit 11034ae9c20f4057a6127fc965906417978e69b2 upstream.

All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't
disable irqs.

 [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
 [root@jovi tracing]# cat trace
 # tracer: nop
 # entries-in-buffer/entries-written: 13/13   #P:2
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-513   [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-513   [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
         sendmail-771   [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6)

The reason is syscall tracing doesn't record irq_flags into buffer.
The proper display is:

 [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
 [root@jovi tracing]# cat trace
 # tracer: nop
 # entries-in-buffer/entries-written: 14/14   #P:2
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-514   [001] ....    46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-514   [001] ....    46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
            <...>-920   [001] ....    47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0)

Signed-off-by: zhangwei(Jovi) <>
Signed-off-by: Steven Rostedt <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
9 years agonfsd4: fix decoding of compounds across page boundaries
J. Bruce Fields [Fri, 21 Jun 2013 15:48:11 +0000 (11:48 -0400)]
nfsd4: fix decoding of compounds across page boundaries

commit 247500820ebd02ad87525db5d9b199e5b66f6636 upstream.

A freebsd NFSv4.0 client was getting rare IO errors expanding a tarball.
A network trace showed the server returning BAD_XDR on the final getattr
of a getattr+write+getattr compound.  The final getattr started on a
page boundary.

I believe the Linux client ignores errors on the post-write getattr, and
that that's why we haven't seen this before.

Reported-by: Rick Macklem <>
Signed-off-by: J. Bruce Fields <>
Signed-off-by: Ben Hutchings <>
9 years agojbd2: fix theoretical race in jbd2__journal_restart
Theodore Ts'o [Mon, 1 Jul 2013 12:12:40 +0000 (08:12 -0400)]
jbd2: fix theoretical race in jbd2__journal_restart

commit 39c04153fda8c32e85b51c96eb5511a326ad7609 upstream.

Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released.  In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.

On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock.  It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system.  But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots.  :-)

Signed-off-by: "Theodore Ts'o" <>
Signed-off-by: Ben Hutchings <>
9 years agoext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
Al Viro [Mon, 1 Jul 2013 12:12:38 +0000 (08:12 -0400)]
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()

commit 64cb927371cd2ec43758d8a094a003d27bc3d0dc upstream.

Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir().  All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.

Signed-off-by: Al Viro <>
Signed-off-by: "Theodore Ts'o" <>
Signed-off-by: Ben Hutchings <>
9 years agopowerpc/smp: Section mismatch from smp_release_cpus to __initdata spinning_secondaries
Chen Gang [Wed, 20 Mar 2013 06:30:12 +0000 (14:30 +0800)]
powerpc/smp: Section mismatch from smp_release_cpus to __initdata spinning_secondaries

commit 8246aca7058f3f2c2ae503081777965cd8df7b90 upstream.

the smp_release_cpus is a normal funciton and called in normal environments,
  but it calls the __initdata spinning_secondaries.
  need modify spinning_secondaries to match smp_release_cpus.

the related warning:
  (the linker report boot_paca.33377, but it should be spinning_secondaries)


WARNING: arch/powerpc/kernel/built-in.o(.text+0x23176): Section mismatch in reference from the function .smp_release_cpus() to the variable
The function .smp_release_cpus() references
the variable __initdata boot_paca.33377.
This is often because .smp_release_cpus lacks a __initdata
annotation or the annotation of boot_paca.33377 is wrong.

WARNING: arch/powerpc/kernel/built-in.o(.text+0x231fe): Section mismatch in reference from the function .smp_release_cpus() to the variable
The function .smp_release_cpus() references
the variable __initdata boot_paca.33377.
This is often because .smp_release_cpus lacks a __initdata
annotation or the annotation of boot_paca.33377 is wrong.


Signed-off-by: Chen Gang <>
Signed-off-by: Benjamin Herrenschmidt <>
Signed-off-by: Ben Hutchings <>
9 years agoRevert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835...
Greg Kroah-Hartman [Sun, 30 Jun 2013 16:03:06 +0000 (09:03 -0700)]
Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"

commit 828c6a102b1f2b8583fadc0e779c46b31d448f0b upstream.

This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366.

As reported by Stefan, this device already works with the parport_serial
driver, so the 8250_pci driver should not also try to grab it as well.

Reported-by: Stefan Seyfried <>
Cc: Wang YanQing <>
Signed-off-by: Greg Kroah-Hartman <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
9 years agoUBIFS: fix a horrid bug
Artem Bityutskiy [Fri, 28 Jun 2013 11:15:15 +0000 (14:15 +0300)]
UBIFS: fix a horrid bug

commit 605c912bb843c024b1ed173dc427cd5c08e5d54d upstream.

Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no
mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are
in the middle of 'ubifs_readdir()'.

This means that 'file->private_data' can be freed while 'ubifs_readdir()' uses
it, and this is a very bad bug: not only 'ubifs_readdir()' can return garbage,
but this may corrupt memory and lead to all kinds of problems like crashes an
security holes.

This patch fixes the problem by using the 'file->f_version' field, which
'->llseek()' always unconditionally sets to zero. We set it to 1 in
'ubifs_readdir()' and whenever we detect that it became 0, we know there was a
seek and it is time to clear the state saved in 'file->private_data'.

I tested this patch by writing a user-space program which runds readdir and
seek in parallell. I could easily crash the kernel without these patches, but
could not crash it with these patches.

Reported-by: Al Viro <>
Tested-by: Artem Bityutskiy <>
Signed-off-by: Artem Bityutskiy <>
Signed-off-by: Al Viro <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
9 years agoUBIFS: prepare to fix a horrid bug
Artem Bityutskiy [Fri, 28 Jun 2013 11:15:14 +0000 (14:15 +0300)]
UBIFS: prepare to fix a horrid bug

commit 33f1a63ae84dfd9ad298cf275b8f1887043ced36 upstream.

Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no
mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are
in the middle of 'ubifs_readdir()'.

First of all, this means that 'file->private_data' can be freed while
'ubifs_readdir()' uses it.  But this particular patch does not fix the problem.
This patch is only a preparation, and the fix will follow next.

In this patch we make 'ubifs_readdir()' stop using 'file->f_pos' directly,
because 'file->f_pos' can be changed by '->llseek()' at any point. This may
lead 'ubifs_readdir()' to returning inconsistent data: directory entry names
may correspond to incorrect file positions.

So here we introduce a local variable 'pos', read 'file->f_pose' once at very
the beginning, and then stick to 'pos'. The result of this is that when
'ubifs_dir_llseek()' changes 'file->f_pos' while we are in the middle of
'ubifs_readdir()', the latter "wins".

Reported-by: Al Viro <>
Tested-by: Artem Bityutskiy <>
Signed-off-by: Artem Bityutskiy <>
Signed-off-by: Al Viro <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
9 years agoxen/time: remove blocked time accounting from xen "clockchip"
Laszlo Ersek [Tue, 18 Oct 2011 20:42:59 +0000 (22:42 +0200)]
xen/time: remove blocked time accounting from xen "clockchip"

commit 0b0c002c340e78173789f8afaa508070d838cf3d upstream.

... because the "clock_event_device framework" already accounts for idle
time through the "event_handler" function pointer in

The patch is intended as the completion of [1]. It should fix the double
idle times seen in PV guests' /proc/stat [2]. It should be orthogonal to
stolen time accounting (the removed code seems to be isolated).

The approach may be completely misguided.


John took the time to retest this patch on top of v3.10 and reported:
"idle time is correctly incremented for pv and hvm for the normal
case, nohz=off and nohz=idle." so lets put this patch in.

Signed-off-by: Laszlo Ersek <>
Signed-off-by: John Haxby <>
Signed-off-by: Konrad Rzeszutek Wilk <>
Signed-off-by: Ben Hutchings <>
9 years agotimer: Fix jiffies wrap behavior of round_jiffies_common()
Bart Van Assche [Tue, 21 May 2013 18:43:50 +0000 (20:43 +0200)]
timer: Fix jiffies wrap behavior of round_jiffies_common()

commit 9e04d3804d3ac97d8c03a41d78d0f0674b5d01e1 upstream.

Direct compare of jiffies related values does not work in the wrap
around case. Replace it with time_is_after_jiffies().

Signed-off-by: Bart Van Assche <>
Cc: Arjan van de Ven <>
Cc: Stephen Rothwell <>
Signed-off-by: Thomas Gleixner <>
Signed-off-by: Ben Hutchings <>
9 years agowriteback: Fix periodic writeback after fs mount
Jan Kara [Fri, 28 Jun 2013 14:04:02 +0000 (16:04 +0200)]
writeback: Fix periodic writeback after fs mount

commit a5faeaf9109578e65e1a32e2a3e76c8b47e7dcb6 upstream.

Code in blkdev.c moves a device inode to default_backing_dev_info when
the last reference to the device is put and moves the device inode back
to its bdi when the first reference is acquired. This includes moving to
wb.b_dirty list if the device inode is dirty. The code however doesn't
setup timer to wake corresponding flusher thread and while wb.b_dirty
list is non-empty __mark_inode_dirty() will not set it up either. Thus
periodic writeback is effectively disabled until a sync(2) call which can
lead to unexpected data loss in case of crash or power failure.

Fix the problem by setting up a timer for periodic writeback in case we
add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi().

Reported-by: Bert De Jonghe <>
Signed-off-by: Jan Kara <>
Signed-off-by: Jens Axboe <>
Signed-off-by: Ben Hutchings <>
9 years agogenirq: Fix can_request_irq() for IRQs without an action
Ben Hutchings [Fri, 28 Jun 2013 01:40:30 +0000 (02:40 +0100)]
genirq: Fix can_request_irq() for IRQs without an action

commit 2779db8d37d4b542d9ca2575f5f178dbeaca6c86 upstream.

Commit 02725e7471b8 ('genirq: Use irq_get/put functions'),
inadvertently changed can_request_irq() to return 0 for IRQs that have
no action.  This causes pcibios_lookup_irq() to select only IRQs that
already have an action with IRQF_SHARED set, or to fail if there are
none.  Change can_request_irq() to return 1 for IRQs that have no
action (if the first two conditions are met).

Reported-by: Bjarni Ingi Gislason <>
Tested-by: Bjarni Ingi Gislason <> (against 3.2)
Signed-off-by: Ben Hutchings <>
Signed-off-by: Thomas Gleixner <>
9 years agodlci: validate the net device in dlci_del()
Zefan Li [Wed, 26 Jun 2013 07:31:58 +0000 (15:31 +0800)]
dlci: validate the net device in dlci_del()

commit 578a1310f2592ba90c5674bca21c1dbd1adf3f0a upstream.

We triggered an oops while running trinity with 3.4 kernel:

BUG: unable to handle kernel paging request at 0000000100000d07
IP: [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci]
PGD 640c0d067 PUD 0
Oops: 0000 [#1] PREEMPT SMP
Pid: 7302, comm: trinity-child3 Not tainted 40 Huawei Technologies Co., Ltd. Tecal RH2285          /BC11BTSA
RIP: 0010:[<ffffffffa0109738>]  [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci]
Call Trace:
  [<ffffffff8137c5c3>] sock_ioctl+0x153/0x280
  [<ffffffff81195494>] do_vfs_ioctl+0xa4/0x5e0
  [<ffffffff8118354a>] ? fget_light+0x3ea/0x490
  [<ffffffff81195a1f>] sys_ioctl+0x4f/0x80
  [<ffffffff81478b69>] system_call_fastpath+0x16/0x1b

It's because the net device is not a dlci device.

Reported-by: Li Jinyue <>
Signed-off-by: Li Zefan <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agodlci: acquire rtnl_lock before calling __dev_get_by_name()
Zefan Li [Wed, 26 Jun 2013 07:29:54 +0000 (15:29 +0800)]
dlci: acquire rtnl_lock before calling __dev_get_by_name()

commit 11eb2645cbf38a08ae491bf6c602eea900ec0bb5 upstream.

Otherwise the net device returned can be freed at anytime.

Signed-off-by: Li Zefan <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
9 years agoHandle big endianness in NTLM (ntlmv2) authentication
Steve French [Tue, 25 Jun 2013 19:03:16 +0000 (14:03 -0500)]
Handle big endianness in NTLM (ntlmv2) authentication

commit fdf96a907c1fbb93c633e2b7ede3b8df26d6a4c0 upstream.

This is RH bug 970891
Uppercasing of username during calculation of ntlmv2 hash fails
because UniStrupr function does not handle big endian wchars.

Also fix a comment in the same code to reflect its correct usage.

[To make it easier for stable (rather than require 2nd patch) fixed
this patch of Shirish's to remove endian warning generated
by sparse -- steve f.]

Reported-by: steve <>
Signed-off-by: Shirish Pargaonkar <>
Reviewed-by: Jeff Layton <>
Signed-off-by: Steve French <>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <>
9 years agocgroup: fix RCU accesses to task->cgroups
Tejun Heo [Tue, 25 Jun 2013 18:48:32 +0000 (11:48 -0700)]
cgroup: fix RCU accesses to task->cgroups

commit 14611e51a57df10240817d8ada510842faf0ec51 upstream.

task->cgroups is a RCU pointer pointing to struct css_set.  A task
switches to a different css_set on cgroup migration but a css_set
doesn't change once created and its pointers to cgroup_subsys_states
aren't RCU protected.

task_subsys_state[_check]() is the macro to acquire css given a task
and subsys_id pair.  It RCU-dereferences task->cgroups->subsys[] not
task->cgroups, so the RCU pointer task->cgroups ends up being
dereferenced without read_barrier_depends() after it.  It's broken.

Fix it by introducing task_css_set[_check]() which does
RCU-dereference on task->cgroups.  task_subsys_state[_check]() is
reimplemented to directly dereference ->subsys[] of the css_set
returned from task_css_set[_check]().

This removes some of sparse RCU warnings in cgroup.

v2: Fixed unbalanced parenthsis and there's no need to use
    rcu_dereference_raw() when !CONFIG_PROVE_RCU.  Both spotted by Li.

Signed-off-by: Tejun Heo <>
Reported-by: Fengguang Wu <>
Acked-by: Li Zefan <>
[bwh: Backported to 3.2:
 - Adjust context
 - Remove CONFIG_PROVE_RCU condition
 - s/lockdep_is_held(&cgroup_mutex)/cgroup_lock_is_held()/]
Signed-off-by: Ben Hutchings <>
9 years agosd: Fix parsing of 'temporary ' cache mode prefix
Ben Hutchings [Mon, 27 May 2013 18:07:19 +0000 (19:07 +0100)]
sd: Fix parsing of 'temporary ' cache mode prefix

commit 2ee3e26c673e75c05ef8b914f54fadee3d7b9c88 upstream.

Commit 39c60a0948cc '[SCSI] sd: fix array cache flushing bug causing
performance problems' added temp as a pointer to "temporary " and used
sizeof(temp) - 1 as its length.  But sizeof(temp) is the size of the
pointer, not the size of the string constant.  Change temp to a static
array so that sizeof() does what was intended.

Signed-off-by: Ben Hutchings <>
Signed-off-by: James Bottomley <>
9 years agosd: fix array cache flushing bug causing performance problems
James Bottomley [Wed, 24 Apr 2013 21:02:53 +0000 (14:02 -0700)]
sd: fix array cache flushing bug causing performance problems

commit 39c60a0948cc06139e2fbfe084f83cb7e7deae3b upstream.

Some arrays synchronize their full non volatile cache when the sd driver sends
a SYNCHRONIZE CACHE command.  Unfortunately, they can have Terrabytes of this
and we send a SYNCHRONIZE CACHE for every barrier if an array reports it has a
writeback cache.  This leads to massive slowdowns on journalled filesystems.

The fix is to allow userspace to turn off the writeback cache setting as a
temporary measure (i.e. without doing the MODE SELECT to write it back to the
device), so even though the device reported it has a writeback cache, the
user, knowing that the cache is non volatile and all they care about is
filesystem correctness, can turn that bit off in the kernel and avoid the
performance ruinous (and safety irrelevant) SYNCHRONIZE CACHE commands.

The way you do this is add a 'temporary' prefix when performing the usual
cache setting operations, so

echo temporary write through > /sys/class/scsi_disk/<disk>/cache_type

Reported-by: Ric Wheeler <>
Signed-off-by: James Bottomley <>
Signed-off-by: Ben Hutchings <>
9 years agoperf: Disable monitoring on setuid processes for regular users
Stephane Eranian [Thu, 20 Jun 2013 09:36:28 +0000 (11:36 +0200)]
perf: Disable monitoring on setuid processes for regular users

commit 2976b10f05bd7f6dab9f9e7524451ddfed656a89 upstream.

There was a a bug in setup_new_exec(), whereby
the test to disabled perf monitoring was not
correct because the new credentials for the
process were not yet committed and therefore
the get_dumpable() test was never firing.

The patch fixes the problem by moving the
perf_event test until after the credentials
are committed.

Signed-off-by: Stephane Eranian <>
Tested-by: Jiri Olsa <>
Acked-by: Peter Zijlstra <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Ben Hutchings <>
9 years agovgacon.c: add cond reschedule points in vgacon_do_font_op
Marcelo Tosatti [Thu, 20 Jun 2013 21:05:56 +0000 (18:05 -0300)]
vgacon.c: add cond reschedule points in vgacon_do_font_op

commit 7e6d72c15ff4cc0c27573901bb05f9eddbd71ed4 upstream.

Booting a 64-vcpu KVM guest, with CONFIG_PREEMPT_VOLUNTARY,
can result in a soft lockup:

BUG: soft lockup - CPU#41 stuck for 67s! [setfont:1505]
 RIP: 0010:[<ffffffff812c48da>]
[<ffffffff812c48da>] vgacon_do_font_op.clone.0+0x1ba/0x550

This is due to the 8192 (cmapsz) IO operations taking longer than expected
due to lock contention in QEMU.

Add conditional resched points in between writes allowing other tasks to

Signed-off-by: Marcelo Tosatti <>
Signed-off-by: Dave Airlie <>
[bwh: Backported to 3.2: add #include <linux/sched.h>, already present
Signed-off-by: Ben Hutchings <>
9 years agofutex: Take hugepages into account when generating futex_key
Zhang Yi [Tue, 25 Jun 2013 13:19:31 +0000 (21:19 +0800)]
futex: Take hugepages into account when generating futex_key

commit 13d60f4b6ab5b702dc8d2ee20999f98a93728aec upstream.

The futex_keys of process shared futexes are generated from the page
offset, the mapping host and the mapping index of the futex user space
address. This should result in an unique identifier for each futex.

Though this is not true when futexes are located in different subpages
of an hugepage. The reason is, that the mapping index for all those
futexes evaluates to the index of the base page of the hugetlbfs
mapping. So a futex at offset 0 of the hugepage mapping and another
one at offset PAGE_SIZE of the same hugepage mapping have identical
futex_keys. This happens because the futex code blindly uses

Steps to reproduce the bug:

1. Map a file from hugetlbfs. Initialize pthread_mutex1 at offset 0
   and pthread_mutex2 at offset PAGE_SIZE of the hugetlbfs

   The mutexes must be initialized as PTHREAD_PROCESS_SHARED because
   PTHREAD_PROCESS_PRIVATE mutexes are not affected by this issue as
   their keys solely depend on the user space address.

2. Lock mutex1 and mutex2

3. Create thread1 and in the thread function lock mutex1, which
   results in thread1 blocking on the locked mutex1.

4. Create thread2 and in the thread function lock mutex2, which
   results in thread2 blocking on the locked mutex2.

5. Unlock mutex2. Despite the fact that mutex2 got unlocked, thread2
   still blocks on mutex2 because the futex_key points to mutex1.

To solve this issue we need to take the normal page index of the page
which contains the futex into account, if the futex is in an hugetlbfs
mapping. In other words, we calculate the normal page mapping index of
the subpage in the hugetlbfs mapping.

Mappings which are not based on hugetlbfs are not affected and still
use page->index.

Thanks to Mel Gorman who provided a patch for adding proper evaluation
functions to the hugetlbfs code to avoid exposing hugetlbfs specific
details to the futex code.

[ tglx: Massaged changelog ]

Signed-off-by: Zhang Yi <>
Reviewed-by: Jiang Biao <>
Tested-by: Ma Chenggong <>
Reviewed-by: 'Mel Gorman' <>
Acked-by: 'Darren Hart' <>
Cc: 'Peter Zijlstra' <>
Signed-off-by: Thomas Gleixner <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
9 years agoUSB: option,qcserial: move Novatel Gobi1K IDs to qcserial
Dan Williams [Thu, 20 Jun 2013 21:07:40 +0000 (16:07 -0500)]
USB: option,qcserial: move Novatel Gobi1K IDs to qcserial

commit a254810a86aaaac4ac6ba44fa934558b042a17a7 upstream.

These devices are all Gobi1K devices (according to the Windows INF
files) and should be handled by qcserial instead of option.  Their
network port is handled by qmi_wwan.

Signed-off-by: Dan Williams <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
9 years agompt2sas: fix firmware failure with wrong task attribute
Sreekanth Reddy [Fri, 1 Feb 2013 19:28:20 +0000 (00:58 +0530)]
mpt2sas: fix firmware failure with wrong task attribute

commit 48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream.

When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.

Signed-off-by: Sreekanth Reddy <>
Signed-off-by: James Bottomley <>
Signed-off-by: Ben Hutchings <>
9 years agompt2sas: Fix for device scan following host reset could get stuck in a infinite loop
Sreekanth Reddy [Fri, 1 Feb 2013 19:26:18 +0000 (00:56 +0530)]
mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop

commit 6241f22ca12a26ee149cbe31b27bac97dbdc8bc4 upstream.

Modified device scan routine so each configuration page read breaks from the
while loop when the ioc_status is not equal to MPI2_IOCSTATUS_SUCCESS.

[jejb: checkpatch fixes]
Signed-off-by: Sreekanth Reddy <>
Signed-off-by: James Bottomley <>
[bwh: Backported to 3.2; adjust context]
Signed-off-by: Ben Hutchings <>
9 years agompt2sas: Fix for issue Missing delay not getting set during system bootup
Reddy, Sreekanth [Tue, 26 Feb 2013 11:29:59 +0000 (16:59 +0530)]
mpt2sas: Fix for issue Missing delay not getting set during system bootup

commit b0df96a0068daee4f9c2189c29b9053eb6e46b17 upstream.

Missing delay is not getting set properly. The reason is that it is not
defined in the same file from where it is being invoked.  The fix is to move
the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c.

Signed-off-by: Sreekanth Reddy <>
Signed-off-by: James Bottomley <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
9 years agoARM: 7765/1: perf: Record the user-mode PC in the call chain.
Jed Davis [Thu, 20 Jun 2013 09:16:29 +0000 (10:16 +0100)]
ARM: 7765/1: perf: Record the user-mode PC in the call chain.

commit c5f927a6f62196226915f12194c9d0df4e2210d7 upstream.

With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip.

It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.

Signed-off-by: Jed Davis <>
Signed-off-by: Will Deacon <>
Signed-off-by: Russell King <>
Signed-off-by: Ben Hutchings <>
9 years agoiommu/amd: Only unmap large pages from the first pte
Alex Williamson [Fri, 21 Jun 2013 20:33:19 +0000 (14:33 -0600)]
iommu/amd: Only unmap large pages from the first pte

commit 60d0ca3cfd199b6612bbbbf4999a3470dad38bb1 upstream.

If we use a large mapping, the expectation is that only unmaps from
the first pte in the superpage are supported.  Unmaps from offsets
into the superpage should fail (ie. return zero sized unmap).  In the
current code, unmapping from an offset clears the size of the full
mapping starting from an offset.  For instance, if we map a 16k
physically contiguous range at IOVA 0x0 with a large page, then
attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and
the unmap returns 16k unmapped.  This potentially incorrectly clears
valid mappings and confuses drivers like VFIO that use the unmap size
to release pinned pages.

Fix by refusing to unmap from offsets into the page.

Signed-off-by: Alex Williamson <>
Signed-off-by: Joerg Roedel <>
Signed-off-by: Ben Hutchings <>
9 years agoBluetooth: Fix invalid length check in l2cap_information_rsp()
Jaganath Kanakkassery [Fri, 21 Jun 2013 14:25:11 +0000 (19:55 +0530)]
Bluetooth: Fix invalid length check in l2cap_information_rsp()

commit 3f6fa3d489e127ca5a5b298eabac3ff5dbe0e112 upstream.

The length check is invalid since the length varies with type of
info response.

This was introduced by the commit cb3b3152b2f5939d67005cff841a1ca748b19888

Because of this, l2cap info rsp is not handled and command reject is sent.

> ACL data: handle 11 flags 0x02 dlen 16
        L2CAP(s): Info rsp: type 2 result 0
          Extended feature mask 0x00b8
            Enhanced Retransmission mode
            Streaming mode
            FCS Option
            Fixed Channels
< ACL data: handle 11 flags 0x00 dlen 10
        L2CAP(s): Command rej: reason 0
          Command not understood

Signed-off-by: Jaganath Kanakkassery <>
Signed-off-by: Chan-Yeol Park <>
Acked-by: Johan Hedberg <>
Signed-off-by: Gustavo Padovan <>
Signed-off-by: Ben Hutchings <>
9 years agoahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs
Seth Heasley [Wed, 19 Jun 2013 23:36:45 +0000 (16:36 -0700)]
ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs

commit 1cfc7df3de10c40ed459e13cce6de616023bf41c upstream.

This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <>
Signed-off-by: Tejun Heo <>
Signed-off-by: Ben Hutchings <>
9 years agoata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs
Seth Heasley [Wed, 19 Jun 2013 23:25:37 +0000 (16:25 -0700)]
ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs

commit c7e8695bfa0611b39493a9dfe8bab9f63f9809bd upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <>
Signed-off-by: Tejun Heo <>
Signed-off-by: Ben Hutchings <>
9 years agohw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot()
Oleg Nesterov [Thu, 20 Jun 2013 15:50:09 +0000 (17:50 +0200)]
hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot()

commit c790b0ad23f427c7522ffed264706238c57c007e upstream.

fetch_bp_busy_slots() and toggle_bp_slot() use
for_each_online_cpu(), this is obviously wrong wrt cpu_up() or
cpu_down(), we can over/under account the per-cpu numbers.

For example:

# echo 0 >> /sys/devices/system/cpu/cpu1/online
# perf record -e mem:0x10 -p 1 &
# echo 1 >> /sys/devices/system/cpu/cpu1/online
# perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10 -C1 -a &
# taskset -p 0x2 1

triggers the same WARN_ONCE("Can't find any breakpoint slot") in

Reported-by: Vince Weaver <>
Signed-off-by: Oleg Nesterov <>
Acked-by: Frederic Weisbecker <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Ben Hutchings <>
9 years agortlwifi: rtl8192cu: Fix duplicate if test
Larry Finger [Tue, 18 Jun 2013 18:25:05 +0000 (13:25 -0500)]
rtlwifi: rtl8192cu: Fix duplicate if test

commit 10d0b9030a3f86e1e26c710c7580524d7787d688 upstream.

A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the
same condition twice. The problem was found using cppcheck-1.49, and the
proper fix was verified against the pre-mac80211 version of the code.

This patch was originally included as commit 1288aa4, but was accidentally
reverted in a later patch.

Reported-by: David Binderman <> [original report]
Reported-by: Andrea Morello <> [report of accidental reversion]
Signed-off-by: Larry Finger <>
Signed-off-by: John W. Linville <>
Signed-off-by: Ben Hutchings <>
9 years agomedia: dmxdev: remove dvb_ringbuffer_flush() on writer side
Soeren Moch [Thu, 6 Jun 2013 00:26:23 +0000 (21:26 -0300)]
media: dmxdev: remove dvb_ringbuffer_flush() on writer side

commit 414abbd2cd4c2618895f02ed3a76ec6647281436 upstream.

In dvb_ringbuffer lock-less synchronizationof reader and writer threads is done
with separateread and write pointers. Sincedvb_ringbuffer_flush() modifies the
read pointer, this function must not be called from the writer thread.
This patch removes the dvb_ringbuffer_flush() calls in the dmxdev ringbuffer
write functions, this fixes Oopses "Unable to handle kernel paging request"
I could observe for the call chaindvb_demux_read ->dvb_dmxdev_buffer_read ->
dvb_ringbuffer_read_user -> __copy_to_user (the reader side of the ringbuffer).
The flush calls at the write side are not necessary anyway since ringbuffer_flush
is also called in dvb_dmxdev_buffer_read() when an error condition is set in the
This patch should also be applied to stable kernels.

Signed-off-by: Soeren Moch <>
Reviewed-by: Sakari Ailus <>
Signed-off-by: Mauro Carvalho Chehab <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
9 years agodrivers: hv: switch to use mb() instead of smp_mb()
Jason Wang [Tue, 18 Jun 2013 05:04:23 +0000 (13:04 +0800)]
drivers: hv: switch to use mb() instead of smp_mb()

commit 35848f68b07df3f917cb13fc3c134718669f569b upstream.

Even if guest were compiled without SMP support, it could not assume that host
wasn't. So switch to use mb() instead of smp_mb() to force memory barriers for
UP guest.

Signed-off-by: Jason Wang <>
Cc: Haiyang Zhang <>
Signed-off-by: K. Y. Srinivasan <>
Signed-off-by: Greg Kroah-Hartman <>
[bwh: Backported to 3.2:
 - Drop changes to functions that don't exist here
 - hv_ringbuffer_write() has only a write memory barrier]
Signed-off-by: Ben Hutchings <>
9 years agoxhci: check for failed dma pool allocation
Mathias Nyman [Mon, 17 Jun 2013 16:56:33 +0000 (09:56 -0700)]
xhci: check for failed dma pool allocation

commit 025f880cb2e4d7218d0422d4b07bea1a68959c38 upstream.

Fail and free the container context in case dma_pool_alloc() can't allocate
the raw context data part of it

This patch should be backported to kernels as old as 2.6.31, that
contain the commit d115b04818e57bdbc7ccde4d0660b15e33013dc8 "USB: xhci:
Support for 64-byte contexts".

Signed-off-by: Mathias Nyman <>
Signed-off-by: Sarah Sharp <>
Cc: John Youn <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
9 years agoALSA: hda - Cache the MUX selection for generic HDMI
Takashi Iwai [Tue, 18 Jun 2013 14:14:22 +0000 (16:14 +0200)]
ALSA: hda - Cache the MUX selection for generic HDMI

commit bddee96b5d0db869f47b195fe48c614ca824203c upstream.

When a selection to a converter MUX is changed in hdmi_pcm_open(), it
should be cached so that the given connection can be restored properly
at PM resume.  We need just to replace the corresponding
snd_hda_codec_write() call with snd_hda_codec_write_cache().

Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
9 years agortlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND
Larry Finger [Mon, 17 Jun 2013 18:25:49 +0000 (13:25 -0500)]
rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND

commit c4d827c5ccc3a49227dbf9d4b248a2e86f388023 upstream.

This is a new device for this driver.

Reported-by: Tobias Kluge <>
Signed-off-by: Larry Finger <>
Cc: Tobias Kluge <>
Signed-off-by: John W. Linville <>
Signed-off-by: Ben Hutchings <>