ext4: reinforce check of i_dtime when clearing high fields of uid and gid

commit 93e3b4e6631d2a74a8cf7429138096862ff9f452 upstream.

Now, ext4_do_update_inode() clears high 16-bit fields of uid/gid
of deleted and evicted inode to fix up interoperability with old
kernels. However, it checks only i_dtime of an inode to determine
whether the inode was deleted and evicted, and this is very risky,
because i_dtime can be used for the pointer maintaining orphan inode
list, too. We need to further check whether the i_dtime is being
used for the orphan inode list even if the i_dtime is not NULL.

We found that high 16-bit fields of uid/gid of inode are unintentionally
and permanently cleared when the inode truncation is just triggered,
but not finished, and the inode metadata, whose high uid/gid bits are
cleared, is written on disk, and the sudden power-off follows that
in order.

Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

cx231xx: fix GPIOs for Pixelview SBTVD hybrid

commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream.

This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filenames]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

cx231xx: don't return error on success

commit 1871d718a9db649b70f0929d2778dc01bc49b286 upstream.

The cx231xx_set_agc_analog_digital_mux_select() callers
expect it to return 0 or an error. Returning a positive value
makes the first attempt to switch between analog/digital to fail.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mb86a20s: fix the locking logic

commit dafb65fb98d85d8e78405e82c83e81975e5d5480 upstream.

On this frontend, it takes a while to start output normal
TS data. That only happens on state S9. On S8, the TS output
is enabled, but it is not reliable enough.

However, the zigzag loop is too fast to let it sync.

As, on practical tests, the zigzag software loop doesn't
seem to be helping, but just slowing down the tuning, let's
switch to hardware algorithm, as the tuners used on such
devices are capable of work with frequency drifts without
any help from software.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtlwifi: Fix missing country code for Great Britain

commit 0c9d3491530773858ff9d705ec2a9c382f449230 upstream.

Some RTL8821AE devices sold in Great Britain have the country code of
0x25 encoded in their EEPROM. This value is not tested in the routine
that establishes the regulatory info for the chip. The fix is to set
this code to have the same capabilities as the EU countries. In addition,
the channels allowed for COUNTRY_CODE_ETSI were more properly suited
for China and Israel, not the EU. This problem has also been fixed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtlwifi: Update regulatory database

commit 02b5fffbe9e02f5d63fa4a801fb807cf0aab4fc9 upstream.

Driver rtlwifi maintains its own regulatory information, The Chrome Autotest
(https://www.chromium.org/chromium-os/testing/autotest-user-doc)
showed some errors. This patch adds the necessary information for rtlwifi.

Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

netfilter: restart search if moved to other chain

commit 95a8d19f28e6b29377a880c6264391a62e07fccc upstream.

In case nf_conntrack_tuple_taken did not find a conflicting entry
check that all entries in this hash slot were tested and restart
in case an entry was moved to another chain.

Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: ea781f197d6a ("netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and get rid of call_rcu()")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.2:
 - Adjust context
 - Use NF_CT_STAT_INC(), not the _ATOMIC variant, since we disable BHs]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: trace full payload of all SAN records (req,resp,iels)

commit aceeffbb59bb91404a0bda32a542d7ebf878433a upstream.

This was lost with commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
but is necessary for problem determination, e.g. to see the
currently active zone set during automatic port scan.

For the large GPN_FT response (4 pages), save space by not dumping
any empty residual entries.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Reviewed-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: fix payload trace length for SAN request&response

commit 94db3725f049ead24c96226df4a4fb375b880a77 upstream.

commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
started to add FC_CT_HDR_LEN which made zfcp dump random data
out of bounds for RSPN GS responses because u.rspn.rsp
is the largest and last field in the union of struct zfcp_fc_req.
Other request/response types only happened to stay within bounds
due to the padding of the union or
due to the trace capping of u.gspn.rsp to ZFCP_DBF_SAN_MAX_PAYLOAD.

Timestamp      : ...
Area           : SAN
Subarea        : 00
Level          : 1
Exception      : -
CPU id         : ..
Caller         : ...
Record id      : 2
Tag            : fsscth2
Request id     : 0x...
Destination ID : 0x00fffffc
Payload short  : 01000000 fc020000 80020000 00000000
                 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx <===
                 00000000 00000000 00000000 00000000
Payload length : 32                                  <===

struct zfcp_fc_req {
    [0] struct zfcp_fsf_ct_els ct_els;
   [56] struct scatterlist sg_req;
   [96] struct scatterlist sg_rsp;
        union {
            struct {req; rsp;} adisc;    SIZE: 28+28=   56
            struct {req; rsp;} gid_pn;   SIZE: 24+20=   44
            struct {rspsg; req;} gpn_ft; SIZE: 40*4+20=180
            struct {req; rsp;} gspn;     SIZE: 20+273= 293
            struct {req; rsp;} rspn;     SIZE: 277+16= 293
  [136] } u;
}
SIZE: 432

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Reviewed-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: fix D_ID field with actual value on tracing SAN responses

commit 771bf03537ddfa4a4dde62ef9dfbc82e4f77ab20 upstream.

With commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
we lost the N_Port-ID where an ELS response comes from.
With commit 7c7dc196814b9e1d5cc254dc579a5fa78ae524f7
("[SCSI] zfcp: Simplify handling of ct and els requests")
we lost the N_Port-ID where a CT response comes from.
It's especially useful if the request SAN trace record
with D_ID was already lost due to trace buffer wrap.

GS uses an open WKA port handle and ELS just a D_ID, and
only for ELS we could get D_ID from QTCB bottom via zfcp_fsf_req.
To cover both cases, add a new field to zfcp_fsf_ct_els
and fill it in on request to use in SAN response trace.
Strictly speaking the D_ID on SAN response is the FC frame's S_ID.
We don't need a field for the other end which is always us.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Fixes: 7c7dc196814b ("[SCSI] zfcp: Simplify handling of ct and els requests")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: restore tracing of handle for port and LUN with HBA records

commit 7c964ffe586bc0c3d9febe9bf97a2e4b2866e5b7 upstream.

This information was lost with
commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
but is required to debug e.g. invalid handle situations.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: trace on request for open and close of WKA port

commit d27a7cb91960cf1fdd11b10071e601828cbf4b1f upstream.

Since commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
HBA records no longer contain WWPN, D_ID, or LUN
to reduce duplicate information which is already in REC records.
In contrast to "regular" target ports, we don't use recovery to open
WKA ports such as directory/nameserver, so we don't get REC records.
Therefore, introduce pseudo REC running records without any
actual recovery action but including D_ID of WKA port on open/close.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: restore: Dont use 0 to indicate invalid LUN in rec trace

commit 0102a30a6ff60f4bb4c07358ca3b1f92254a6c25 upstream.

bring back
commit d21e9daa63e009ce5b87bbcaa6d11ce48e07bbbe
("[SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec trace")
which was lost with
commit ae0904f60fab7cb20c48d32eefdd735e478b91fb
("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.")

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: retain trace level for SCSI and HBA FSF response records

commit 35f040df97fa0e94c7851c054ec71533c88b4b81 upstream.

While retaining the actual filtering according to trace level,
the following commits started to write such filtered records
with a hardcoded record level of 1 instead of the actual record level:
commit 250a1352b95e1db3216e5c5d4f4365bea5122f4a
("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.")
commit a54ca0f62f953898b05549391ac2a8a4dad6482b
("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")

Now we can distinguish written records again for offline level filtering.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 250a1352b95e ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.")
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: close window with unblocked rport during rport gone

commit 4eeaa4f3f1d6c47b69f70e222297a4df4743363e upstream.

On a successful end of reopen port forced,
zfcp_erp_strategy_followup_success() re-uses the port erp_action
and the subsequent zfcp_erp_action_cleanup() now
sees ZFCP_ERP_SUCCEEDED with
erp_action->action==ZFCP_ERP_ACTION_REOPEN_PORT
instead of ZFCP_ERP_ACTION_REOPEN_PORT_FORCED
but must not perform zfcp_scsi_schedule_rport_register().

We can detect this because the fresh port reopen erp_action
is in its very first step ZFCP_ERP_STEP_UNINITIALIZED.

Otherwise this opens a time window with unblocked rport
(until the followup port reopen recovery would block it again).
If a scsi_cmnd timeout occurs during this time window
fc_timed_out() cannot work as desired and such command
would indeed time out and trigger scsi_eh. This prevents
a clean and timely path failover.
This should not happen if the path issue can be recovered
on FC transport layer such as path issues involving RSCNs.

Also, unnecessary and repeated DID_IMM_RETRY for pending and
undesired new requests occur because internally zfcp still
has its zfcp_port blocked.

As follow-on errors with scsi_eh, it can cause,
in the worst case, permanently lost paths due to one of:
sd <scsidev>: [<scsidisk>] Medium access timeout failure. Offlining disk!
sd <scsidev>: Device offlined - not ready after error recovery

For fix validation and to aid future debugging with other recoveries
we now also trace (un)blocking of rports.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 5767620c383a ("[SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED")
Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors")
Fixes: 5f852be9e11d ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI")
Fixes: 338151e06608 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable")
Fixes: 3859f6a248cb ("[PATCH] zfcp: add rports to enable scsi_add_device to work again")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: fix ELS/GS request&response length for hardware data router

commit 70369f8e15b220f50a16348c79a61d3f7054813c upstream.

In the hardware data router case, introduced with kernel 3.2
commit 86a9668a8d29 ("[SCSI] zfcp: support for hardware data router")
the ELS/GS request&response length needs to be initialized
as in the chained SBAL case.

Otherwise, the FCP channel rejects ELS requests with
FSF_REQUEST_SIZE_TOO_LARGE.

Such ELS requests can be issued by user space through BSG / HBA API,
or zfcp itself uses ADISC ELS for remote port link test on RSCN.
The latter can cause a short path outage due to
unnecessary remote target port recovery because the always
failing ADISC cannot detect extremely short path interruptions
beyond the local FCP channel.

Below example is decoded with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : SAN
Subarea        : 00
Level          : 1
Exception      : -
CPU id         : ..
Caller         : zfcp_dbf_san_req+0408
Record id      : 1
Tag            : fssels1
Request id     : 0x<reqid>
Destination ID : 0x00<target d_id>
Payload info   : 52000000 00000000 <our wwpn       >           [ADISC]
                 <our wwnn       > 00<s_id> 00000000
                 00000000 00000000 00000000 00000000

Timestamp      : ...
Area           : HBA
Subarea        : 00
Level          : 1
Exception      : -
CPU id         : ..
Caller         : zfcp_dbf_hba_fsf_res+0740
Record id      : 1
Tag            : fs_ferr
Request id     : 0x<reqid>
Request status : 0x00000010
FSF cmnd       : 0x0000000b               [FSF_QTCB_SEND_ELS]
FSF sequence no: 0x...
FSF issued     : ...
FSF stat       : 0x00000061   [FSF_REQUEST_SIZE_TOO_LARGE]
FSF stat qual  : 00000000 00000000 00000000 00000000
Prot stat      : 0x00000100
Prot stat qual : 00000000 00000000 00000000 00000000

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 86a9668a8d29 ("[SCSI] zfcp: support for hardware data router")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

zfcp: fix fc_host port_type with NPIV

commit bd77befa5bcff8c51613de271913639edf85fbc2 upstream.

For an NPIV-enabled FCP device, zfcp can erroneously show
"NPort (fabric via point-to-point)" instead of "NPIV VPORT"
for the port_type sysfs attribute of the corresponding
fc_host.
s390-tools that can be affected are dbginfo.sh and ziomon.

zfcp_fsf_exchange_config_evaluate() ignores
fsf_qtcb_bottom_config.connection_features indicating NPIV
and only sets fc_host_port_type to FC_PORTTYPE_NPORT if
fsf_qtcb_bottom_config.fc_topology is FSF_TOPO_FABRIC.

Only the independent zfcp_fsf_exchange_port_evaluate()
evaluates connection_features to overwrite fc_host_port_type
to FC_PORTTYPE_NPIV in case of NPIV.
Code was introduced with upstream kernel 2.6.30
commit 0282985da5923fa6365adcc1a1586ae0c13c1617
("[SCSI] zfcp: Report fc_host_port_type as NPIV").

This works during FCP device recovery (such as set online)
because it performs FSF_QTCB_EXCHANGE_CONFIG_DATA followed by
FSF_QTCB_EXCHANGE_PORT_DATA in sequence.

However, the zfcp-specific scsi host sysfs attributes
"requests", "megabytes", or "seconds_active" trigger only
zfcp_fsf_exchange_config_evaluate() resetting fc_host
port_type to FC_PORTTYPE_NPORT despite NPIV.

The zfcp-specific scsi host sysfs attribute "utilization"
triggers only zfcp_fsf_exchange_port_evaluate() correcting
the fc_host port_type again in case of NPIV.

Evaluate fsf_qtcb_bottom_config.connection_features
in zfcp_fsf_exchange_config_evaluate() where it belongs to.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 0282985da592 ("[SCSI] zfcp: Report fc_host_port_type as NPIV")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fbdev/efifb: Fix 16 color palette entry calculation

commit d50b3f43db739f03fcf8c0a00664b3d2fed0496e upstream.

When using efifb with a 16-bit (5:6:5) visual, fbcon's text is rendered
in the wrong colors - e.g. text gray (#aaaaaa) is rendered as green
(#50bc50) and neighboring pixels have slightly different values
(such as #50bc78).

The reason is that fbcon loads its 16 color palette through
efifb_setcolreg(), which in turn calculates a 32-bit value to write
into memory for each palette index.
Until now, this code could only handle 8-bit visuals and didn't mask
overlapping values when ORing them.

With this patch, fbcon displays the correct colors when a qemu VM is
booted in 16-bit mode (in GRUB: "set gfxpayload=800x600x16").

Fixes: 7c83172b98e5 ("x86_64 EFI boot support: EFI frame buffer driver")  # v2.6.24+
Signed-off-by: Max Staudt <mstaudt@suse.de>
Acked-By: Peter Jones <pjones@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Linux 3.2.84

ext3: NULL dereference in ext3_evict_inode()

commit bcdd0c1600903e9222abfcde28947406020ccb5d upstream.

This is an fsfuzzer bug.  ->s_journal is set at the end of
ext3_load_journal() but we try to use it in the error handling from
ext3_get_journal() while it's still NULL.

[  337.039041] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024
[  337.040380] IP: [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.041687] PGD 0
[  337.043118] Oops: 0002 [#1] SMP
[  337.044483] CPU 3
[  337.044495] Modules linked in: ecb md4 cifs fuse kvm_intel kvm brcmsmac brcmutil crc8 cordic r8169 [last unloaded: scsi_wait_scan]
[  337.047633]
[  337.049259] Pid: 8308, comm: mount Not tainted 3.2.0-rc2-next-20111121+ #24 SAMSUNG ELECTRONICS CO., LTD. RV411/RV511/E3511/S3511    /RV411/RV511/E3511/S3511
[  337.051064] RIP: 0010:[<ffffffff816e6539>]  [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.052879] RSP: 0018:ffff8800b1d11ae8  EFLAGS: 00010282
[  337.054668] RAX: 0000000000000100 RBX: 0000000000000000 RCX: ffff8800b77c2000
[  337.056400] RDX: ffff8800a97b5c00 RSI: 0000000000000000 RDI: 0000000000000024
[  337.058099] RBP: ffff8800b1d11ae8 R08: 6000000000000000 R09: e018000000000000
[  337.059841] R10: ff67366cc2607c03 R11: 00000000110688e6 R12: 0000000000000000
[  337.061607] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8800a78f06e8
[  337.063385] FS:  00007f9d95652800(0000) GS:ffff8800b7180000(0000) knlGS:0000000000000000
[  337.065110] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  337.066801] CR2: 0000000000000024 CR3: 00000000aef2c000 CR4: 00000000000006e0
[  337.068581] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  337.070321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  337.072105] Process mount (pid: 8308, threadinfo ffff8800b1d10000, task ffff8800b1d02be0)
[  337.073800] Stack:
[  337.075487]  ffff8800b1d11b08 ffffffff811f48cf ffff88007ac9b158 0000000000000000
[  337.077255]  ffff8800b1d11b38 ffffffff8119405d ffff88007ac9b158 ffff88007ac9b250
[  337.078851]  ffffffff8181bda0 ffffffff8181bda0 ffff8800b1d11b68 ffffffff81131e31
[  337.080284] Call Trace:
[  337.081706]  [<ffffffff811f48cf>] log_start_commit+0x1f/0x40
[  337.083107]  [<ffffffff8119405d>] ext3_evict_inode+0x1fd/0x2a0
[  337.084490]  [<ffffffff81131e31>] evict+0xa1/0x1a0
[  337.085857]  [<ffffffff81132031>] iput+0x101/0x210
[  337.087220]  [<ffffffff811339d1>] iget_failed+0x21/0x30
[  337.088581]  [<ffffffff811905fc>] ext3_iget+0x15c/0x450
[  337.089936]  [<ffffffff8118b0c1>] ? ext3_rsv_window_add+0x81/0x100
[  337.091284]  [<ffffffff816df9a4>] ext3_get_journal+0x15/0xde
[  337.092641]  [<ffffffff811a2e9b>] ext3_fill_super+0xf2b/0x1c30
[  337.093991]  [<ffffffff810ddf7d>] ? register_shrinker+0x4d/0x60
[  337.095332]  [<ffffffff8111c112>] mount_bdev+0x1a2/0x1e0
[  337.096680]  [<ffffffff811a1f70>] ? ext3_setup_super+0x210/0x210
[  337.098026]  [<ffffffff8119a770>] ext3_mount+0x10/0x20
[  337.099362]  [<ffffffff8111cbee>] mount_fs+0x3e/0x1b0
[  337.100759]  [<ffffffff810eda1b>] ? __alloc_percpu+0xb/0x10
[  337.102330]  [<ffffffff81135385>] vfs_kern_mount+0x65/0xc0
[  337.103889]  [<ffffffff8113611f>] do_kern_mount+0x4f/0x100
[  337.105442]  [<ffffffff811378fc>] do_mount+0x19c/0x890
[  337.106989]  [<ffffffff810e8456>] ? memdup_user+0x46/0x90
[  337.108572]  [<ffffffff810e84f3>] ? strndup_user+0x53/0x70
[  337.110114]  [<ffffffff811383fb>] sys_mount+0x8b/0xe0
[  337.111617]  [<ffffffff816ed93b>] system_call_fastpath+0x16/0x1b
[  337.113133] Code: 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b 5d c3 0f 1f 84 00 00 00 00 00 55 b8 00 01 00 00 48 89 e5 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 0c 0f 1f 00 f3 90 0f b6 07 38
[  337.116588] RIP  [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.118260]  RSP <ffff8800b1d11ae8>
[  337.119998] CR2: 0000000000000024
[  337.188701] ---[ end trace c36d790becac1615 ]---

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xenbus: don't look up transaction IDs for ordinary writes

commit 9a035a40f7f3f6708b79224b86c5777a3334f7ea upstream.

This should really only be done for XS_TRANSACTION_END messages, or
else at least some of the xenstore-* tools don't work anymore.

Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition")
Reported-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ed Swierk <eswierk@skyportsystems.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xenbus: don't BUG() on user mode induced condition

commit 0beef634b86a1350c31da5fcc2992f0d7c8a622b upstream.

Inability to locate a user mode specified transaction ID should not
lead to a kernel crash. For other than XS_TRANSACTION_START also
don't issue anything to xenbus if the specified ID doesn't match that
of any active transaction.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ed Swierk <eswierk@skyportsystems.com>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usbvision: revert commit 588afcc1

commit d5468d7afaa9c9e961e150f0455a14a9f4872a98 upstream.

Commit 588afcc1c0e4 ("[media] usbvision fix overflow of interfaces
array")' should be reverted, because:

* "!dev->actconfig->interface[ifnum]" won't catch a case where the value
is not NULL but some garbage. This way the system may crash later with
GPF.

* "(ifnum >= USB_MAXINTERFACES)" does not cover all the error
conditions. "ifnum" should be compared to "dev->actconfig->
desc.bNumInterfaces", i.e. compared to the number of "struct
usb_interface" kzalloc()-ed, not to USB_MAXINTERFACES.

* There is a "struct usb_device" leak in this error path, as there is
usb_get_dev(), but no usb_put_dev() on this path.

* There is a bug of the same type several lines below with number of
endpoints. The code is accessing hard-coded second endpoint
("interface->endpoint[1].desc") which may not exist. It would be great
to handle this in the same patch too.

* All the concerns above are resolved by already-accepted commit fa52bd50
("[media] usbvision: fix crash on detecting device with invalid
configuration")

* Mailing list message:
http://www.spinics.net/lists/linux-media/msg94832.html

Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

posix_acl: Clear SGID bit when setting file permissions

commit 073931017b49d9458aa351605b43a7e34598caef upstream.

When file permissions are modified via chmod(2) and the user is not in
the owning group or capable of CAP_FSETID, the setgid bit is cleared in
inode_change_ok().  Setting a POSIX ACL via setxattr(2) sets the file
permissions as well as the new ACL, but doesn't clear the setgid bit in
a similar way; this allows to bypass the check in chmod(2).  Fix that.

References: CVE-2016-7097
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[bwh: Backported to 3.2:
 - Drop changes to ceph, f2fs, hfsplus, orangefs
 - Use capable() instead of capable_wrt_inode_uidgid()
 - Update ext3 and generic_acl.c as well
 - In gfs2, jfs, and xfs, take care to avoid leaking the allocated ACL if
   posix_acl_update_mode() determines it's not needed
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Btrfs: skip adding an acl attribute if we don't have to

commit 755ac67f83e515af55adbfe55134eb7d90839cdb upstream.

If the acl can be exactly represented in the traditional file
mode permission bits, we don't set another acl attribute.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fs: Avoid premature clearing of capabilities

commit 030b533c4fd4d2ec3402363323de4bb2983c9cee upstream.

Currently, notify_change() clears capabilities or IMA attributes by
calling security_inode_killpriv() before calling into ->setattr. Thus it
happens before any other permission checks in inode_change_ok() and user
is thus allowed to trigger clearing of capabilities or IMA attributes
for any file he can look up e.g. by calling chown for that file. This is
unexpected and can lead to user DoSing a system.

Fix the problem by calling security_inode_killpriv() at the end of
inode_change_ok() instead of from notify_change(). At that moment we are
sure user has permissions to do the requested change.

References: CVE-2015-1350
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fs: Give dentry to inode_change_ok() instead of inode

commit 31051c85b5e2aaaf6315f74c72a732673632a905 upstream.

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
[bwh: Backported to 3.2:
 - Drop changes to f2fs, lustre, orangefs, overlayfs
 - Adjust filenames, context
 - In nfsd, pass dentry to nfsd_sanitize_attrs()
 - In xfs, pass dentry to xfs_change_file_space(), xfs_set_mode(),
   xfs_setattr_nonsize(), and xfs_setattr_size()
 - Update ext3 as well
 - Mark pohmelfs as BROKEN; it's long dead upstream]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

firewire: net: guard against rx buffer overflows

commit 667121ace9dbafb368618dbabcf07901c962ddac upstream.

The IP-over-1394 driver firewire-net lacked input validation when
handling incoming fragmented datagrams.  A maliciously formed fragment
with a respectively large datagram_offset would cause a memcpy past the
datagram buffer.

So, drop any packets carrying a fragment with offset + length larger
than datagram_size.

In addition, ensure that
  - GASP header, unfragmented encapsulation header, or fragment
    encapsulation header actually exists before we access it,
  - the encapsulated datagram or fragment is of nonzero size.

Reported-by: Eyal Itkin <eyal.itkin@gmail.com>
Reviewed-by: Eyal Itkin <eyal.itkin@gmail.com>
Fixes: CVE 2016-8633
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
[bwh: Backported to 3.2: fwnet_receive_broadcast() never matches IPv6 packets]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

scsi: arcmsr: Buffer overflow in arcmsr_iop_message_xfer()

commit 7bc2b55a5c030685b399bb65b6baa9ccc3d1f167 upstream.

We need to put an upper bound on "user_len" so the memcpy() doesn't
overflow.

Reported-by: Marco Grassi <marco.gra@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Use literal 1032 insetad of ARCMSR_API_DATA_BUFLEN]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

KEYS: Fix short sprintf buffer in /proc/keys show function

commit 03dab869b7b239c4e013ec82aea22e181e441cfc upstream.

This fixes CVE-2016-7042.

Fix a short sprintf buffer in proc_keys_show().  If the gcc stack protector
is turned on, this can cause a panic due to stack corruption.

The problem is that xbuf[] is not big enough to hold a 64-bit timeout
rendered as weeks:

(gdb) p 0xffffffffffffffffULL/(60*60*24*7)
$2 = 30500568904943

That's 14 chars plus NUL, not 11 chars plus NUL.

Expand the buffer to 16 chars.

I think the unpatched code apparently works if the stack-protector is not
enabled because on a 32-bit machine the buffer won't be overflowed and on a
64-bit machine there's a 64-bit aligned pointer at one side and an int that
isn't checked again on the other side.

The panic incurred looks something like:

Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81352ebe
CPU: 0 PID: 1692 Comm: reproducer Not tainted 4.7.2-201.fc24.x86_64 #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 0000000000000086 00000000fbbd2679 ffff8800a044bc00 ffffffff813d941f
 ffffffff81a28d58 ffff8800a044bc98 ffff8800a044bc88 ffffffff811b2cb6
 ffff880000000010 ffff8800a044bc98 ffff8800a044bc30 00000000fbbd2679
Call Trace:
 [<ffffffff813d941f>] dump_stack+0x63/0x84
 [<ffffffff811b2cb6>] panic+0xde/0x22a
 [<ffffffff81352ebe>] ? proc_keys_show+0x3ce/0x3d0
 [<ffffffff8109f7f9>] __stack_chk_fail+0x19/0x30
 [<ffffffff81352ebe>] proc_keys_show+0x3ce/0x3d0
 [<ffffffff81350410>] ? key_validate+0x50/0x50
 [<ffffffff8134db30>] ? key_default_cmp+0x20/0x20
 [<ffffffff8126b31c>] seq_read+0x2cc/0x390
 [<ffffffff812b6b12>] proc_reg_read+0x42/0x70
 [<ffffffff81244fc7>] __vfs_read+0x37/0x150
 [<ffffffff81357020>] ? security_file_permission+0xa0/0xc0
 [<ffffffff81246156>] vfs_read+0x96/0x130
 [<ffffffff81247635>] SyS_read+0x55/0xc0
 [<ffffffff817eb872>] entry_SYSCALL_64_fastpath+0x1a/0xa4

Reported-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Bluetooth: Fix potential NULL dereference in RFCOMM bind callback

commit 951b6a0717db97ce420547222647bcc40bf1eacd upstream.

addr can be NULL and it should not be dereferenced before NULL checking.

Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
[bwh: Backported to 3.2:
 - There's no 'chan' variable
 - Keep using batostr() to log addresses
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mm,ksm: fix endless looping in allocating memory when ksm enable

commit 5b398e416e880159fe55eefd93c6588fa072cd66 upstream.

I hit the following hung task when runing a OOM LTP test case with 4.1
kernel.

Call trace:
[<ffffffc000086a88>] __switch_to+0x74/0x8c
[<ffffffc000a1bae0>] __schedule+0x23c/0x7bc
[<ffffffc000a1c09c>] schedule+0x3c/0x94
[<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350
[<ffffffc000a1e32c>] down_write+0x64/0x80
[<ffffffc00021f794>] __ksm_exit+0x90/0x19c
[<ffffffc0000be650>] mmput+0x118/0x11c
[<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74
[<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4
[<ffffffc0000d0f34>] get_signal+0x444/0x5e0
[<ffffffc000089fcc>] do_signal+0x1d8/0x450
[<ffffffc00008a35c>] do_notify_resume+0x70/0x78

The oom victim cannot terminate because it needs to take mmap_sem for
write while the lock is held by ksmd for read which loops in the page
allocator

ksm_do_scan
scan_get_next_rmap_item
down_read
get_next_rmap_item
alloc_rmap_item   #ksmd will loop permanently.

There is no way forward because the oom victim cannot release any memory
in 4.1 based kernel.  Since 4.6 we have the oom reaper which would solve
this problem because it would release the memory asynchronously.
Nevertheless we can relax alloc_rmap_item requirements and use
__GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan
would just retry later after the lock got dropped.

Such a patch would be also easy to backport to older stable kernels which
do not have oom_reaper.

While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed
by the allocation failure.

Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Suggested-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route

commit 2cf750704bb6d7ed8c7d732e071dd1bc890ea5e8 upstream.

Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid
instead of the previous dst_pid which was copied from in_skb's portid.
Since the skb is new the portid is 0 at that point so the packets are sent
to the kernel and we get scheduling while atomic or a deadlock (depending
on where it happens) by trying to acquire rtnl two times.
Also since this is RTM_GETROUTE, it can be triggered by a normal user.

Here's the sleeping while atomic trace:
[ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0
[ 7858.212881] 2 locks held by swapper/0/0:
[ 7858.213013]  #0:  (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350
[ 7858.213422]  #1:  (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130
[ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179
[ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 7858.214108]  0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000
[ 7858.214412]  ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e
[ 7858.214716]  000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f
[ 7858.215251] Call Trace:
[ 7858.215412]  <IRQ>  [<ffffffff813a7804>] dump_stack+0x85/0xc1
[ 7858.215662]  [<ffffffff810a4a72>] ___might_sleep+0x192/0x250
[ 7858.215868]  [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100
[ 7858.216072]  [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0
[ 7858.216279]  [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460
[ 7858.216487]  [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40
[ 7858.216687]  [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260
[ 7858.216900]  [<ffffffff81573c70>] rtnl_unicast+0x20/0x30
[ 7858.217128]  [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0
[ 7858.217351]  [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130
[ 7858.217581]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.217785]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.217990]  [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350
[ 7858.218192]  [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350
[ 7858.218415]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.218656]  [<ffffffff810fde10>] run_timer_softirq+0x260/0x640
[ 7858.218865]  [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f
[ 7858.219068]  [<ffffffff816637c8>] __do_softirq+0xe8/0x54f
[ 7858.219269]  [<ffffffff8107a948>] irq_exit+0xb8/0xc0
[ 7858.219463]  [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50
[ 7858.219678]  [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0
[ 7858.219897]  <EOI>  [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10
[ 7858.220165]  [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10
[ 7858.220373]  [<ffffffff810298e3>] default_idle+0x23/0x190
[ 7858.220574]  [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20
[ 7858.220790]  [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60
[ 7858.221016]  [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0
[ 7858.221257]  [<ffffffff8164f995>] rest_init+0x135/0x140
[ 7858.221469]  [<ffffffff81f83014>] start_kernel+0x50e/0x51b
[ 7858.221670]  [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120
[ 7858.221894]  [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c
[ 7858.222113]  [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a

Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2:
 - Use 'pid' instead of 'portid' where necessary
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tracing: Move mutex to protect against resetting of seq data

commit 1245800c0f96eb6ebb368593e251d66c01e61022 upstream.

The iter->seq can be reset outside the protection of the mutex. So can
reading of user data. Move the mutex up to the beginning of the function.

Fixes: d7350c3f45694 ("tracing/core: make the read callbacks reentrants")
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

can: dev: fix deadlock reported after bus-off

commit 9abefcb1aaa58b9d5aa40a8bb12c87d02415e4c8 upstream.

A timer was used to restart after the bus-off state, leading to a
relatively large can_restart() executed in an interrupt context,
which in turn sets up pinctrl. When this happens during system boot,
there is a high probability of grabbing the pinctrl_list_mutex,
which is locked already by the probe() of other device, making the
kernel suspect a deadlock condition [1].

To resolve this issue, the restart_timer is replaced by a delayed
work.

[1] https://github.com/victronenergy/venus/issues/24

Signed-off-by: Sergei Miroshnichenko <sergeimir@emcraft.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

btrfs: ensure that file descriptor used with subvol ioctls is a dir

commit 325c50e3cebb9208009083e841550f98a863bfa0 upstream.

If the subvol/snapshot create/destroy ioctls are passed a regular file
with execute permissions set, we'll eventually Oops while trying to do
inode->i_op->lookup via lookup_one_len.

This patch ensures that the file descriptor refers to a directory.

Fixes: cb8e70901d (Btrfs: Fix subvolume creation locking rules)
Fixes: 76dda93c6a (Btrfs: add snapshot/subvolume destroy ioctl)
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
[bwh: Backported to 3.2:
 - Open-code file_inode()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

i2c-eg20t: fix race between i2c init and interrupt enable

commit 371a015344b6e270e7e3632107d9554ec6d27a6b upstream.

the eg20t driver call request_irq() function before the pch_base_address,
base address of i2c controller's register, is assigned an effective value.

there is one possible scenario that an interrupt which isn't inside eg20t
arrives immediately after request_irq() is executed when i2c controller
shares an interrupt number with others. since the interrupt handler
pch_i2c_handler() has already active as shared action, it will be called
and read its own register to determine if this interrupt is from itself.

At that moment, since base address of i2c registers is not remapped
in kernel space yet,so the INT handler will access an illegal address
and then a error occurs.

Signed-off-by: Yadi.hu <yadi.hu@windriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ocfs2: fix start offset to ocfs2_zero_range_for_truncate()

commit d21c353d5e99c56cdd5b5c1183ffbcaf23b8b960 upstream.

If we punch a hole on a reflink such that following conditions are met:

1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
   (hole range > MAX_CONTIG_BYTES(1MB)),

we dont COW the first cluster starting at the start offset.  But in this
case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out.  This will modify the
cluster in place and zero it in the source too.

Fix this by skipping this cluster in such a scenario.

To reproduce:

1. Create a random file of say 10 MB
     xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink  it
     reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary  with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
     fallocate -p -o 0 -l 1048615 reflnktest
4. sync
5. Check the  first cluster in the source file. (It will be zeroed out).
    dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C

Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reported-by: Saar Maoz <saar.maoz@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ocfs2/dlm: fix race between convert and migration

commit e6f0c6e6170fec175fe676495f29029aecdf486c upstream.

Commit ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery")
checks if lockres master has changed to identify whether new master has
finished recovery or not.  This will introduce a race that right after
old master does umount ( means master will change), a new convert
request comes.

In this case, it will reset lockres state to DLM_RECOVERING and then
retry convert, and then fail with lockres->l_action being set to
OCFS2_AST_INVALID, which will cause inconsistent lock level between
ocfs2 and dlm, and then finally BUG.

Since dlm recovery will clear lock->convert_pending in
dlm_move_lockres_to_recovery_list, we can use it to correctly identify
the race case between convert and recovery.  So fix it.

Fixes: ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery")
Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.com
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xfrm: Fix memory leak of aead algorithm name

commit b588479358ce26f32138e0f0a7ab0678f8e3e601 upstream.

commit 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms")
introduced aead. The function attach_aead kmemdup()s the algorithm
name during xfrm_state_construct().
However this memory is never freed.
Implementation has since been slightly modified in
commit ee5c23176fcc ("xfrm: Clone states properly on migration")
without resolving this leak.
This patch adds a kfree() call for the aead algorithm name.

Fixes: 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Acked-by: Rami Rosen <roszenrami@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

openrisc: fix the fix of copy_from_user()

commit 8e4b72054f554967827e18be1de0e8122e6efc04 upstream.

Since commit acb2505d0119 ("openrisc: fix copy_from_user()"),
copy_from_user() returns the number of bytes requested, not the
number of bytes not copied.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: acb2505d0119 ("openrisc: fix copy_from_user()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

avr32: fix 'undefined reference to `___copy_from_user'

commit 65c0044ca8d7c7bbccae37f0ff2972f0210e9f41 upstream.

avr32 builds fail with:

arch/avr32/kernel/built-in.o: In function `arch_ptrace':
(.text+0x650): undefined reference to `___copy_from_user'
arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined
reference to `___copy_from_user'
kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax':
(.text+0x5dd8): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin':
sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `ptrace_has_cap':
ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user'
kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to
`___copy_from_user' follow

Fixes: 8630c32275ba ("avr32: fix copy_from_user()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

irda: Free skb on irda_accept error path.

commit 8ab86c00e349cef9fb14719093a7f198bcc72629 upstream.

skb is not freed if newsk is NULL. Rework the error path so free_skb is
unconditionally called on function exit.

Fixes: c3ea9fa27413 ("[IrDA] af_irda: IRDA_ASSERT cleanups")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

IB/ipoib: Don't allow MC joins during light MC flush

commit 344bacca8cd811809fc33a249f2738ab757d327f upstream.

This fix solves a race between light flush and on the fly joins.
Light flush doesn't set the device to down and unset IPOIB_OPER_UP
flag, this means that if while flushing we have a MC join in progress
and the QP was attached to BC MGID we can have a mismatches when
re-attaching a QP to the BC MGID.

The light flush would set the broadcast group to NULL causing an on
the fly join to rejoin and reattach to the BC MCG as well as adding
the BC MGID to the multicast list. The flush process would later on
remove the BC MGID and detach it from the QP. On the next flush
the BC MGID is present in the multicast list but not found when trying
to detach it because of the previous double attach and single detach.

[18332.714265] ------------[ cut here ]------------
[18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core]
...
[18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
[18332.779411]  0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000
[18332.784960]  0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300
[18332.790547]  ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280
[18332.796199] Call Trace:
[18332.798015]  [<ffffffff813fed47>] dump_stack+0x63/0x8c
[18332.801831]  [<ffffffff8109add1>] __warn+0xd1/0xf0
[18332.805403]  [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20
[18332.809706]  [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core]
[18332.814384]  [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib]
[18332.820031]  [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib]
[18332.825220]  [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib]
[18332.830290]  [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib]
[18332.834911]  [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0
[18332.839741]  [<ffffffff81772bd1>] rollback_registered+0x31/0x40
[18332.844091]  [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80
[18332.848880]  [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib]
[18332.853848]  [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib]
[18332.858474]  [<ffffffff81520c08>] dev_attr_store+0x18/0x30
[18332.862510]  [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50
[18332.866349]  [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170
[18332.870471]  [<ffffffff81207198>] __vfs_write+0x28/0xe0
[18332.874152]  [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50
[18332.878274]  [<ffffffff81208062>] vfs_write+0xa2/0x1a0
[18332.881896]  [<ffffffff812093a6>] SyS_write+0x46/0xa0
[18332.885632]  [<ffffffff810039b7>] do_syscall_64+0x57/0xb0
[18332.889709]  [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25
[18332.894727] ---[ end trace 09ebbe31f831ef17 ]---

Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: change bInterval default to 10 ms

commit 08c5cd37480f59ea39682f4585d92269be6b1424 upstream.

Some full-speed mceusb infrared transceivers contain invalid endpoint
descriptors for their interrupt endpoints, with bInterval set to 0.
In the past they have worked out okay with the mceusb driver, because
the driver sets the bInterval field in the descriptor to 1,
overwriting whatever value may have been there before.  However, this
approach was never sanctioned by the USB core, and in fact it does not
work with xHCI controllers, because they use the bInterval value that
was present when the configuration was installed.

Currently usbcore uses 32 ms as the default interval if the value in
the endpoint descriptor is invalid.  It turns out that these IR
transceivers don't work properly unless the interval is set to 10 ms
or below.  To work around this mceusb problem, this patch changes the
endpoint-descriptor parsing routine, making the default interval value
be 10 ms rather than 32 ms.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Wade Berrier <wberrier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

avr32: fix copy_from_user()

commit 8630c32275bac2de6ffb8aea9d9b11663e7ad28e upstream.

really ugly, but apparently avr32 compilers turns access_ok() into
something so bad that they want it in assembler.  Left that way,
zeroing added in inline wrapper.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

microblaze: fix __get_user()

commit e98b9e37ae04562d52c96f46b3cf4c2e80222dc1 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

microblaze: fix copy_from_user()

commit d0cf385160c12abd109746cad1f13e3b3e8b50b8 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

m32r: fix __get_user()

commit c90a3bc5061d57e7931a9b7ad14784e1a0ed497d upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

blackfin: fix copy_from_user()

commit 8f035983dd826d7e04f67b28acf8e2f08c347e41 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sparc32: fix copy_from_user()

commit 917400cecb4b52b5cde5417348322bb9c8272fa6 upstream.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sh: fix copy_from_user()

commit 6e050503a150b2126620c1a1e9b3a368fcd51eac upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sh64: failing __get_user() should zero

commit c6852389228df9fb3067f94f3b651de2a7921b36 upstream.

It could be done in exception-handling bits in __get_user_b() et.al.,
but the surgery involved would take more knowledge of sh64 details
than I have or _want_ to have.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

score: fix copy_from_user() and friends

commit b615e3c74621e06cd97f86373ca90d43d6d998aa upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

score: fix __get_user/get_user

commit c2f18fa4cbb3ad92e033a24efa27583978ce9600 upstream.

* should zero on any failure
* __get_user() should use __copy_from_user(), not copy_from_user()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390: get_user() should zero on failure

commit fd2d2b191fe75825c4c7a6f12f3fef35aaed7dd7 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ppc32: fix copy_from_user()

commit 224264657b8b228f949b42346e09ed8c90136a8e upstream.

should clear on access_ok() failures.  Also remove the useless
range truncation logics.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: no calls to check_object_size()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

parisc: fix copy_from_user()

commit aace880feea38875fbc919761b77e5732a3659ef upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

openrisc: fix copy_from_user()

commit acb2505d0119033a80c85ac8d02dccae41271667 upstream.

... that should zero on faults.  Also remove the <censored> helpful
logics wrt range truncation copied from ppc32.  Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mn10300: copy_from_user() should zero on access_ok() failure...

commit ae7cc577ec2a4a6151c9e928fd1f595d953ecef1 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: include <linux/string.h> to get declaration of memset()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mn10300: failing __get_user() and get_user() should zero

commit 43403eabf558d2800b429cd886e996fd555aa542 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ia64: copy_from_user() should zero the destination on access_ok() failure

commit a5e541f796f17228793694d64b507f5f57db4cd7 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: no calls to check_object_size()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hexagon: fix strncpy_from_user() error return

commit f35c1e0671728d1c9abc405d05ef548b5fcb2fc4 upstream.

It's -EFAULT, not -1 (and contrary to the comment in there,
__strnlen_user() can return 0 - on faults).

Acked-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

frv: fix clear_user()

commit 3b8767a8f00cc6538ba6b1cf0f88502e2fd2eb90 upstream.

It should check access_ok().  Otherwise a bunch of places turn into
trivially exploitable rootholes.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

cris: buggered copy_from_user/copy_to_user/clear_user

commit eb47e0293baaa3044022059f1fa9ff474bfe35cb upstream.

* copy_from_user() on access_ok() failure ought to zero the destination
* none of those primitives should skip the access_ok() check in case of
small constant size.

Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

asm-generic: make get_user() clear the destination on errors

commit 9ad18b75c2f6e4a78ce204e79f37781f8815c0fa upstream.

both for access_ok() failures and for faults halfway through

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

crypto: skcipher - Fix blkcipher walk OOM crash

commit acdb04d0b36769b3e05990c488dc74d8b7ac8060 upstream.

When we need to allocate a temporary blkcipher_walk_next and it
fails, the code is supposed to take the slow path of processing
the data block by block.  However, due to an unrelated change
we instead end up dereferencing the NULL pointer.

This patch fixes it by moving the unrelated bsize setting out
of the way so that we enter the slow path as inteded.

Fixes: 7607bd8ff03b ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block")
Reported-by: xiakaixu <xiakaixu@huawei.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[bwh: Backported to 3.2: s/walk_blocksize/blocksize/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: sa1111: fix pcmcia suspend/resume

commit 06dfe5cc0cc684e735cb0232fdb756d30780b05d upstream.

SA1111 PCMCIA was broken when PCMCIA switched to using dev_pm_ops for
the PCMCIA socket class.  PCMCIA used to handle suspend/resume via the
socket hosting device, which happened at normal device suspend/resume
time.

However, the referenced commit changed this: much of the resume now
happens much earlier, in the noirq resume handler of dev_pm_ops.

However, on SA1111, the PCMCIA device is not accessible as the SA1111
has not been resumed at _noirq time.  It's slightly worse than that,
because the SA1111 has already been put to sleep at _noirq time, so
suspend doesn't work properly.

Fix this by converting the core SA1111 code to use dev_pm_ops as well,
and performing its own suspend/resume at noirq time.

This fixes these errors in the kernel log:

pcmcia_socket pcmcia_socket0: time out after reset
pcmcia_socket pcmcia_socket1: time out after reset

and the resulting lack of PCMCIA cards after a S2RAM cycle.

Fixes: d7646f7632549 ("pcmcia: use dev_pm_ops for class pcmcia_socket_class")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

NFSv4.1: Fix the CREATE_SESSION slot number accounting

commit b519d408ea32040b1c7e10b155a3ee9a36660947 upstream.

Ensure that we conform to the algorithm described in RFC5661, section
18.36.4 for when to bump the sequence id. In essence we do it for all
cases except when the RPC call timed out, or in case of the server returning
NFS4ERR_DELAY or NFS4ERR_STALE_CLIENTID.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[bwh: Backported to 3.2:
 - Add the 'out' label
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl

commit f6d7c1b5598b6407c3f1da795dd54acf99c1990c upstream.

This fixes subpage writes when using 4-bit HW ECC.

There has been numerous reports about ECC errors with devices using this
driver for a while.  Also the 4-bit ECC has been reported as broken with
subpages in [1] and with 16 bits NANDs in the driver and in mach* board
files both in mainline and in the vendor BSPs.

What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to
try reinitializing the ECC engine:
- R/W on whole pages properly generates/checks RS code
- try writing the 1st subpage only of a blank page, the subpage is well
  written and the RS code properly generated, re-reading the same page
  the HW detects some ECC error, reading the same page again no ECC
  error is detected

Note that the ECC engine is already reinitialized in the 1-bit case.

Tested on my LCDK with UBI+UBIFS using subpages.
This could potentially get rid of the issue workarounded in [1].

[1] 28c015a9daab ("mtd: davinci-nand: disable subpage write for keystone-nand")

Fixes: 6a4123e581b3 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage")
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

asm-generic: make copy_from_user() zero the destination properly

commit 2545e5da080b4839dd859e3b09343a884f6ab0e3 upstream.

... in all cases, including the failing access_ok()

Note that some architectures using asm-generic/uaccess.h have
__copy_from_user() not zeroing the tail on failure halfway
through.  This variant works either way.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

alpha: fix copy_from_user()

commit 2561d309dfd1555e781484af757ed0115035ddb3 upstream.

it should clear the destination even when access_ok() fails.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xfrm_user: propagate sec ctx allocation errors

commit 2f30ea5090cbc57ea573cdc66421264b3de3fb0a upstream.

When we fail to attach the security context in xfrm_state_construct()
we'll return 0 as error value which, in turn, will wrongly claim success
to userland when, in fact, we won't be adding / updating the XFRM state.

This is a regression introduced by commit fd21150a0fe1 ("[XFRM] netlink:
Inline attach_encap_tmpl(), attach_sec_ctx(), and attach_one_addr()").

Fix it by propagating the error returned by security_xfrm_state_alloc()
in this case.

Fixes: fd21150a0fe1 ("[XFRM] netlink: Inline attach_encap_tmpl()...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: rawmidi: Fix possible deadlock with virmidi registration

commit 816f318b2364262a51024096da7ca3b84e78e3b5 upstream.

When a seq-virmidi driver is initialized, it registers a rawmidi
instance with its callback to create an associated seq kernel client.
Currently it's done throughly in rawmidi's register_mutex context.
Recently it was found that this may lead to a deadlock another rawmidi
device that is being attached with the sequencer is accessed, as both
open with the same register_mutex.  This was actually triggered by
syzkaller, as Dmitry Vyukov reported:

======================================================
 [ INFO: possible circular locking dependency detected ]
 4.8.0-rc1+ #11 Not tainted
 -------------------------------------------------------
 syz-executor/7154 is trying to acquire lock:
  (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341

 but task is already holding lock:
  (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&grp->list_mutex){++++.+}:
    [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
    [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22
    [<     inline     >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681
    [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822
    [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418
    [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101
    [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297
    [<     inline     >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383
    [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450
    [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645
    [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164
    [<     inline     >] __snd_device_register sound/core/device.c:162
    [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212
    [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749
    [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123
    [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564
    ......

 -> #0 (register_mutex#5){+.+.+.}:
    [<     inline     >] check_prev_add kernel/locking/lockdep.c:1829
    [<     inline     >] check_prevs_add kernel/locking/lockdep.c:1939
    [<     inline     >] validate_chain kernel/locking/lockdep.c:2266
    [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335
    [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
    [<     inline     >] __mutex_lock_common kernel/locking/mutex.c:521
    [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621
    [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
    [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188
    [<     inline     >] subscribe_port sound/core/seq/seq_ports.c:427
    [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510
    [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579
    [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480
    [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225
    [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440
    [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375
    [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281
    [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274
    [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138
    [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639
    ......

 other info that might help us debug this:

 Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&grp->list_mutex);
                                lock(register_mutex#5);
                                lock(&grp->list_mutex);
   lock(register_mutex#5);

 *** DEADLOCK ***
======================================================

The fix is to simply move the registration parts in
snd_rawmidi_dev_register() to the outside of the register_mutex lock.
The lock is needed only to manage the linked list, and it's not
necessarily to cover the whole initialization process.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: timer: Fix zero-division by continue of uninitialized instance

commit 9f8a7658bcafb2a7853f7a2eae8a94e87e6e695b upstream.

When a user timer instance is continued without the explicit start
beforehand, the system gets eventually zero-division error like:

  divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
  CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
   task: ffff88003c9b2280 task.stack: ffff880027280000
   RIP: 0010:[<ffffffff858e1a6c>]  [<     inline     >] ktime_divns include/linux/ktime.h:195
   RIP: 0010:[<ffffffff858e1a6c>]  [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62
  Call Trace:
   <IRQ>
   [<     inline     >] __run_hrtimer kernel/time/hrtimer.c:1238
   [<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302
   [<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336
   [<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933
   [<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957
   [<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487
   <EOI>
   .....

Although a similar issue was spotted and a fix patch was merged in
commit [6b760bb2c63a: ALSA: timer: fix division by zero after
SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of
iceberg.

In this patch, we fix the issue a bit more drastically.  Basically the
continue of an uninitialized timer is supposed to be a fresh start, so
we do it for user timers.  For the direct snd_timer_continue() call,
there is no way to pass the initial tick value, so we kick out for the
uninitialized case.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2:
 - Adjust context
 - In _snd_timer_stop(), check the value of 'event' instead of 'stop']
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: timer: Code cleanup

commit c3b1681375dc6e71d89a3ae00cc3ce9e775a8917 upstream.

This is a minor code cleanup without any functional changes:
- Kill keep_flag argument from _snd_timer_stop(), as all callers pass
  only it false.
- Remove redundant NULL check in _snd_timer_stop().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust to apply after previously backported
 "ALSA: timer: Fix race between stop and interrupt"]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

crypto: cryptd - initialize child shash_desc on import

commit 0bd2223594a4dcddc1e34b15774a3a4776f7749e upstream.

When calling .import() on a cryptd ahash_request, the structure members
that describe the child transform in the shash_desc need to be initialized
like they are when calling .init()

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sched/core: Fix a race between try_to_wake_up() and a woken up task

commit 135e8c9250dd5c8c9aae5984fde6f230d0cbfeaf upstream.

The origin of the issue I've seen is related to
a missing memory barrier between check for task->state and
the check for task->on_rq.

The task being woken up is already awake from a schedule()
and is doing the following:

do {
schedule()
set_current_state(TASK_(UN)INTERRUPTIBLE);
} while (!cond);

The waker, actually gets stuck doing the following in
try_to_wake_up():

while (p->on_cpu)
cpu_relax();

Analysis:

The instance I've seen involves the following race:

 CPU1 CPU2

 while () {
   if (cond)
     break;
   do {
     schedule();
     set_current_state(TASK_UN..)
   } while (!cond);
wakeup_routine()
  spin_lock_irqsave(wait_lock)
   raw_spin_lock_irqsave(wait_lock)   wake_up_process()
 }   try_to_wake_up()
 set_current_state(TASK_RUNNING);   ..
 list_del(&waiter.list);

CPU2 wakes up CPU1, but before it can get the wait_lock and set
current state to TASK_RUNNING the following occurs:

 CPU3
 wakeup_routine()
 raw_spin_lock_irqsave(wait_lock)
 if (!list_empty)
   wake_up_process()
   try_to_wake_up()
   raw_spin_lock_irqsave(p->pi_lock)
   ..
   if (p->on_rq && ttwu_wakeup())
   ..
   while (p->on_cpu)
     cpu_relax()
   ..

CPU3 tries to wake up the task on CPU1 again since it finds
it on the wait_queue, CPU1 is spinning on wait_lock, but immediately
after CPU2, CPU3 got it.

CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and
the task is spinning on the wait_lock. Interestingly since p->on_rq
is checked under pi_lock, I've noticed that try_to_wake_up() finds
p->on_rq to be 0. This was the most confusing bit of the analysis,
but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq
check is not reliable without this fix IMHO. The race is visible
(based on the analysis) only when ttwu_queue() does a remote wakeup
via ttwu_queue_remote. In which case the p->on_rq change is not
done uder the pi_lock.

The result is that after a while the entire system locks up on
the raw_spin_irqlock_save(wait_lock) and the holder spins infintely

Reproduction of the issue:

The issue can be reproduced after a long run on my system with 80
threads and having to tweak available memory to very low and running
memory stress-ng mmapfork test. It usually takes a long time to
reproduce. I am trying to work on a test case that can reproduce
the issue faster, but thats work in progress. I am still testing the
changes on my still in a loop and the tests seem OK thus far.

Big thanks to Benjamin and Nick for helping debug this as well.
Ben helped catch the missing barrier, Nick caught every missing
bit in my theory.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[ Updated comment to clarify matching barriers. Many
  architectures do not have a full barrier in switch_to()
  so that cannot be relied upon. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <nicholas.piggin@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

iio: accel: kxsd9: Fix scaling bug

commit 307fe9dd11ae44d4f8881ee449a7cbac36e1f5de upstream.

All the scaling of the KXSD9 involves multiplication with a
fraction number < 1.

However the scaling value returned from IIO_INFO_SCALE was
unpredictable as only the micros of the value was assigned, and
not the integer part, resulting in scaling like this:

$cat in_accel_scale
-1057462640.011978

Fix this by assigning zero to the integer part.

Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

IB/ipoib: Fix memory corruption in ipoib cm mode connect flow

commit 546481c2816ea3c061ee9d5658eb48070f69212e upstream.

When a new CM connection is being requested, ipoib driver copies data
from the path pointer in the CM/tx object, the path object might be
invalid at the point and memory corruption will happened later when now
the CM driver will try using that data.

The next scenario demonstrates it:
neigh_add_path --> ipoib_cm_create_tx -->
queue_work (pointer to path is in the cm/tx struct)
#while the work is still in the queue,
#the port goes down and causes the ipoib_flush_paths:
ipoib_flush_paths --> path_free --> kfree(path)
#at this point the work scheduled starts.
ipoib_cm_tx_start --> copy from the (invalid)path pointer:
(memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);)
 -> memory corruption.

To fix that the driver now starts the CM/tx connection only if that
specific path exists in the general paths database.
This check is protected with the relevant locks, and uses the gid from
the neigh member in the CM/tx object which is valid according to the ref
count that was taken by the CM/tx.

Fixes: 839fcaba35 ('IPoIB: Connected mode experimental support')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
[bwh: Backported to 3.2: s/neigh->daddr/neigh->neighbour->ha/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

IB/core: Fix use after free in send_leave function

commit 68c6bcdd8bd00394c234b915ab9b97c74104130c upstream.

The function send_leave sets the member: group->query_id
(group->query_id = ret) after calling the sa_query, but leave_handler
can be executed before the setting and it might delete the group object,
and will get a memory corruption.

Additionally, this patch gets rid of group->query_id variable which is
not used.

Fixes: faec2f7b96b5 ('IB/sa: Track multicast join/leave requests')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86/paravirt: Do not trace _paravirt_ident_*() functions

commit 15301a570754c7af60335d094dd2d1808b0641a5 upstream.

Łukasz Daniluk reported that on a RHEL kernel that his machine would lock up
after enabling function tracer. I asked him to bisect the functions within
available_filter_functions, which he did and it came down to three:

  _paravirt_nop(), _paravirt_ident_32() and _paravirt_ident_64()

It was found that this is only an issue when noreplace-paravirt is added
to the kernel command line.

This means that those functions are most likely called within critical
sections of the funtion tracer, and must not be traced.

In newer kenels _paravirt_nop() is defined within gcc asm(), and is no
longer an issue.  But both _paravirt_ident_{32,64}() causes the
following splat when they are traced:

 mm/pgtable-generic.c:33: bad pmd ffff8800d2435150(0000000001d00054)
 mm/pgtable-generic.c:33: bad pmd ffff8800d3624190(0000000001d00070)
 mm/pgtable-generic.c:33: bad pmd ffff8800d36a5110(0000000001d00054)
 mm/pgtable-generic.c:33: bad pmd ffff880118eb1450(0000000001d00054)
 NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [systemd-journal:469]
 Modules linked in: e1000e
 CPU: 2 PID: 469 Comm: systemd-journal Not tainted 4.6.0-rc4-test+ #513
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
 task: ffff880118f740c0 ti: ffff8800d4aec000 task.ti: ffff8800d4aec000
 RIP: 0010:[<ffffffff81134148>]  [<ffffffff81134148>] queued_spin_lock_slowpath+0x118/0x1a0
 RSP: 0018:ffff8800d4aefb90  EFLAGS: 00000246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011eb16d40
 RDX: ffffffff82485760 RSI: 000000001f288820 RDI: ffffea0000008030
 RBP: ffff8800d4aefb90 R08: 00000000000c0000 R09: 0000000000000000
 R10: ffffffff821c8e0e R11: 0000000000000000 R12: ffff880000200fb8
 R13: 00007f7a4e3f7000 R14: ffffea000303f600 R15: ffff8800d4b562e0
 FS:  00007f7a4e3d7840(0000) GS:ffff88011eb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f7a4e3f7000 CR3: 00000000d3e71000 CR4: 00000000001406e0
 Call Trace:
   _raw_spin_lock+0x27/0x30
   handle_pte_fault+0x13db/0x16b0
   handle_mm_fault+0x312/0x670
   __do_page_fault+0x1b1/0x4e0
   do_page_fault+0x22/0x30
   page_fault+0x28/0x30
   __vfs_read+0x28/0xe0
   vfs_read+0x86/0x130
   SyS_read+0x46/0xa0
   entry_SYSCALL_64_fastpath+0x1e/0xa8
 Code: 12 48 c1 ea 0c 83 e8 01 83 e2 30 48 98 48 81 c2 40 6d 01 00 48 03 14 c5 80 6a 5d 82 48 89 0a 8b 41 08 85 c0 75 09 f3 90 8b 41 08 <85> c0 74 f7 4c 8b 09 4d 85 c9 74 08 41 0f 18 09 eb 02 f3 90 8b

Reported-by: Łukasz Daniluk <lukasz.daniluk@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: timer: fix NULL pointer dereference in read()/ioctl() race

commit 11749e086b2766cccf6217a527ef5c5604ba069c upstream.

I got this with syzkaller:

    ==================================================================
    BUG: KASAN: null-ptr-deref on address 0000000000000020
    Read of size 32 by task syz-executor/22519
    CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2
    014
     0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90
     ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80
     ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68
    Call Trace:
     [<ffffffff81f9f141>] dump_stack+0x83/0xb2
     [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0
     [<ffffffff8161ff74>] kasan_report+0x34/0x40
     [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790
     [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0
     [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20
     [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790
     [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
     [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250
     [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0
     [<ffffffff8127c278>] ? do_group_exit+0x108/0x330
     [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0
     [<ffffffff81674dfe>] __vfs_read+0x10e/0x550
     [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
     [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50
     [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60
     [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190
     [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380
     [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0
     [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0
     [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0
     [<ffffffff81675355>] vfs_read+0x115/0x330
     [<ffffffff81676371>] SyS_read+0xd1/0x1a0
     [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
     [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20
     [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0
     [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0
     [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25
    ==================================================================

There are a couple of problems that I can see:

 - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets
   tu->queue/tu->tqueue to NULL on memory allocation failure, so read()
   would get a NULL pointer dereference like the above splat

 - the same ioctl() can free tu->queue/to->tqueue which means read()
   could potentially see (and dereference) the freed pointer

We can fix both by taking the ioctl_lock mutex when dereferencing
->queue/->tqueue, since that's always held over all the ioctl() code.

Just looking at the code I find it likely that there are more problems
here such as tu->qhead pointing outside the buffer if the size is
changed concurrently using SNDRV_TIMER_IOCTL_PARAMS.

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: timer: fix NULL pointer dereference on memory allocation failure

commit 8ddc05638ee42b18ba4fe99b5fb647fa3ad20456 upstream.

I hit this with syzkaller:

    kasan: CONFIG_KASAN_INLINE enabled
    kasan: GPF could be caused by NULL-ptr deref or user memory access
    general protection fault: 0000 [#1] PREEMPT SMP KASAN
    CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    task: ffff88011278d600 task.stack: ffff8801120c0000
    RIP: 0010:[<ffffffff82c8ba07>]  [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100
    RSP: 0018:ffff8801120c7a60  EFLAGS: 00010006
    RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007
    RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048
    RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790
    R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980
    R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286
    FS:  00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0
    Stack:
     ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0
     ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000
     ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0
    Call Trace:
     [<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670
     [<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0
     [<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830
     [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90
     [<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050
     [<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0
     [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200
     [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0
     [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0
     [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190
     [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0
     [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0
     [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0
     [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46
    RIP  [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100
     RSP <ffff8801120c7a60>
    ---[ end trace 5955b08db7f2b029 ]---

This can happen if snd_hrtimer_open() fails to allocate memory and
returns an error, which is currently not checked by snd_timer_open():

    ioctl(SNDRV_TIMER_IOCTL_SELECT)
     - snd_timer_user_tselect()
- snd_timer_close()
   - snd_hrtimer_close()
      - (struct snd_timer *) t->private_data = NULL
        - snd_timer_open()
           - snd_hrtimer_open()
              - kzalloc() fails; t->private_data is still NULL

    ioctl(SNDRV_TIMER_IOCTL_START)
     - snd_timer_user_start()
- snd_timer_start()
   - snd_timer_start1()
      - snd_hrtimer_start()
- t->private_data == NULL // boom

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: don't put_device() since snd_timer_instance_new()
 doesn't take a device reference]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE

commit 6b760bb2c63a9e322c0e4a0b5daf335ad93d5a33 upstream.

I got this:

    divide error: 0000 [#1] PREEMPT SMP KASAN
    CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    task: ffff8801120a9580 task.stack: ffff8801120b0000
    RIP: 0010:[<ffffffff82c8bd9a>]  [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0
    RSP: 0018:ffff88011aa87da8  EFLAGS: 00010006
    RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000
    RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001
    RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048
    R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00
    R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000
    FS:  00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0
    Stack:
     0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76
     ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0
     00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0
    Call Trace:
     <IRQ>
     [<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00
     [<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130
     [<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0
     [<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0
     [<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0
     [<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0
     [<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0
     [<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0
     [<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0
     <EOI>
     [<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60
     [<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670
     [<ffffffff82c87015>] snd_timer_continue+0x45/0x80
     [<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830
     [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90
     [<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0
     [<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050
     [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200
     [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0
     [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0
     [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190
     [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0
     [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0
     [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0
     [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00
    RIP  [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0
     RSP <ffff88011aa87da8>
    ---[ end trace 6aa380f756a21074 ]---

The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a
completely new/unused timer -- it will have ->sticks == 0, which causes a
divide by 0 in snd_hrtimer_callback().

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fs/seq_file: fix out-of-bounds read

commit 088bf2ff5d12e2e32ee52a4024fec26e582f44d3 upstream.

seq_read() is a nasty piece of work, not to mention buggy.

It has (I think) an old bug which allows unprivileged userspace to read
beyond the end of m->buf.

I was getting these:

    BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880
    Read of size 2713 by task trinity-c2/1329
    CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    Call Trace:
      kasan_object_err+0x1c/0x80
      kasan_report_error+0x2cb/0x7e0
      kasan_report+0x4e/0x80
      check_memory_region+0x13e/0x1a0
      kasan_check_read+0x11/0x20
      seq_read+0xcd2/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      entry_SYSCALL64_slow_path+0x25/0x25
    Object at ffff880116889100, in cache kmalloc-4096 size: 4096
    Allocated:
    PID = 1329
      save_stack_trace+0x26/0x80
      save_stack+0x46/0xd0
      kasan_kmalloc+0xad/0xe0
      __kmalloc+0x1aa/0x4a0
      seq_buf_alloc+0x35/0x40
      seq_read+0x7d8/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      return_from_SYSCALL_64+0x0/0x6a
    Freed:
    PID = 0
    (stack is not available)
    Memory state around the buggy address:
     ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ^
     ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ==================================================================
    Disabling lock debugging due to kernel taint

This seems to be the same thing that Dave Jones was seeing here:

  https://lkml.org/lkml/2016/8/12/334

There are multiple issues here:

  1) If we enter the function with a non-empty buffer, there is an attempt
     to flush it. But it was not clearing m->from after doing so, which
     means that if we try to do this flush twice in a row without any call
     to traverse() in between, we are going to be reading from the wrong
     place -- the splat above, fixed by this patch.

  2) If there's a short write to userspace because of page faults, the
     buffer may already contain multiple lines (i.e. pos has advanced by
     more than 1), but we don't save the progress that was made so the
     next call will output what we've already returned previously. Since
     that is a much less serious issue (and I have a headache after
     staring at seq_read() for the past 8 hours), I'll leave that for now.

Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: option: add WeTelecom 0x6802 and 0x6803 products

commit 40d9c32525cba79130612650b1abc47c0c0f19a8 upstream.

These product IDs are listed in Windows driver.
0x6803 corresponds to WeTelecom WM-D300.
0x6802 name is unknown.

Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86/apic: Do not init irq remapping if ioapic is disabled

commit 2e63ad4bd5dd583871e6602f9d398b9322d358d9 upstream.

native_smp_prepare_cpus
  -> default_setup_apic_routing
    -> enable_IR_x2apic
      -> irq_remapping_prepare
        -> intel_prepare_irq_remapping
          -> intel_setup_irq_remapping

So IR table is setup even if "noapic" boot parameter is added. As a result we
crash later when the interrupt affinity is set due to a half initialized
remapping infrastructure.

Prevent remap initialization when IOAPIC is disabled.

Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ubifs: Fix assertion in layout_in_gaps()

commit c0082e985fdf77b02fc9e0dac3b58504dcf11b7a upstream.

An assertion in layout_in_gaps() verifies that the gap_lebs pointer is
below the maximum bound. When computing this maximum bound the idx_lebs
count is multiplied by sizeof(int), while C pointers arithmetic does take
into account the size of the pointed elements implicitly already. Remove
the multiplication to fix the assertion.

Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system")
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: avoid left shift by -1

commit 53e5f36fbd2453ad69a3369a1db62dc06c30a4aa upstream.

UBSAN complains about a left shift by -1 in proc_do_submiturb().  This
can occur when an URB is submitted for a bulk or control endpoint on
a high-speed device, since the code doesn't bother to check the
endpoint type; normally only interrupt or isochronous endpoints have
a nonzero bInterval value.

Aside from the fact that the operation is illegal, it shouldn't matter
because the result isn't used.  Still, in theory it could cause a
hardware exception or other problem, so we should work around it.
This patch avoids doing the left shift unless the shift amount is >= 0.

The same piece of code has another problem.  When checking the device
speed (the exponential encoding for interrupt endpoints is used only
by high-speed or faster devices), we need to look for speed >=
USB_SPEED_SUPER as well as speed == USB_SPEED HIGH.  The patch adds
this check.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Vittorio Zecca <zeccav@gmail.com>
Tested-by: Vittorio Zecca <zeccav@gmail.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: fix typo in wMaxPacketSize validation

commit 6c73358c83ce870c0cf32413e5cadb3b9a39c606 upstream.

The maximum value allowed for wMaxPacketSize of a high-speed interrupt
endpoint is 1024 bytes, not 1023.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()

commit f4693b08cc901912a87369c46537b94ed4084ea0 upstream.

We can't assign -EINVAL to a u16.

Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver')
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm: Reject page_flip for !DRIVER_MODESET

commit 6f00975c619064a18c23fd3aced325ae165a73b9 upstream.

Somehow this one slipped through, which means drivers without modeset
support can be oopsed (since those also don't call
drm_mode_config_init, which means the crtc lookup will chase an
uninitalized idr).

Reported-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

iio: accel: kxsd9: Fix raw read return

commit 7ac61a062f3147dc23e3f12b9dfe7c4dd35f9cb8 upstream.

Any readings from the raw interface of the KXSD9 driver will
return an empty string, because it does not return
IIO_VAL_INT but rather some random value from the accelerometer
to the caller.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: option: add WeTelecom WM-D200

commit 6695593e4a7659db49ac6eca98c164f7b5589f72 upstream.

Add support for WeTelecom WM-D200.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22de ProdID=6801 Rev=00.00
S:  Manufacturer=WeTelecom Incorporated
S:  Product=WeTelecom Mobile Products
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

parisc: Fix order of EREFUSED define in errno.h

commit 3eb53b20d7bd1374598cfb1feaa081fcac0e76cd upstream.

When building gccgo in userspace, errno.h gets parsed and the go include file
sysinfo.go is generated.

Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED
is defined later on in errno.h, this leads to go complaining that EREFUSED
isn't defined yet.

Fix this trivial problem by moving the define of EREFUSED down after
ECONNREFUSED in errno.h (and clean up the indenting while touching this line).

Signed-off-by: Helge Deller <deller@gmx.de>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

commit 47af45d684b5f3ae000ad448db02ce4f13f73273 upstream.

The commit 4097461897df ("Input: i8042 - break load dependency ...")
correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do
the same for AUX port(s), which results in communication on KBD and AUX
ports to clash with each other.

Fixes: 4097461897df ("Input: i8042 - break load dependency ...")
Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: fix radeon_move_blit on 32bit systems

commit 13f479b9df4e2bbf2d16e7e1b02f3f55f70e2455 upstream.

This bug seems to be present for a very long time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tcp: fix use after free in tcp_xmit_retransmit_queue()

commit bb1fceca22492109be12640d49f5ea5a544c6bb4 upstream.

When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the
tail of the write queue using tcp_add_write_queue_tail()

Then it attempts to copy user data into this fresh skb.

If the copy fails, we undo the work and remove the fresh skb.

Unfortunately, this undo lacks the change done to tp->highest_sack and
we can leave a dangling pointer (to a freed skb)

Later, tcp_xmit_retransmit_queue() can dereference this pointer and
access freed memory. For regular kernels where memory is not unmapped,
this might cause SACK bugs because tcp_highest_sack_seq() is buggy,
returning garbage instead of tp->snd_nxt, but with various debug
features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel.

This bug was found by Marco Grassi thanks to syzkaller.

Fixes: 6859d49475d4 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb")
Reported-by: Marco Grassi <marco.gra@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xhci: don't dereference a xhci member after removing xhci

commit f1f6d9a8b540df22b87a5bf6bc104edaade81f47 upstream.

Remove the hcd after checking for the xhci last quirks, not before.

This caused a hang on a Alpine Ridge xhci based maching which remove
the whole xhci controller when unplugging the last usb device

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>