11 years agox86: Fix S4 regression
Takashi Iwai [Sun, 23 Oct 2011 21:19:12 +0000 (23:19 +0200)]
x86: Fix S4 regression

Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4
regression since 2.6.39, namely the machine reboots occasionally at S4
resume.  It doesn't happen always, overall rate is about 1/20.  But,
like other bugs, once when this happens, it continues to happen.

This patch fixes the problem by essentially reverting the memory
assignment in the older way.

Signed-off-by: Takashi Iwai <>
Cc: <>
Cc: Rafael J. Wysocki <>
Cc: Yinghai Lu <>
[ We'll hopefully find the real fix, but that's too late for 3.1 now ]
Signed-off-by: Linus Torvalds <>
11 years agoMerge branch 'samsung-fixes-4' of git://
Linus Torvalds [Sun, 23 Oct 2011 07:44:40 +0000 (10:44 +0300)]
Merge branch 'samsung-fixes-4' of git://

* 'samsung-fixes-4' of git://
  ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM
  ARM: S5P: fix offset calculation on gpio-interrupt

11 years agoMerge branch 'hwmon-for-linus' of git://
Linus Torvalds [Sun, 23 Oct 2011 07:43:31 +0000 (10:43 +0300)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://
  hwmon: (w83627ehf) Fix negative 8-bit temperature values

11 years agoARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM
Domenico Andreoli [Fri, 21 Oct 2011 19:00:53 +0000 (04:00 +0900)]
ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM

- register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be
  conditionally compiled out, it is already optimized out on !CONFIG_PM
- fix also s3c2412 and s3c2416 affected by the same build issue

s3c2440.c fails to build if !CONFIG_PM because in such case
s3c2410_pm_syscore_ops is not defined. Same error should happen also
in s3c2410.c and s3c2442.c

Signed-off-by: Domenico Andreoli <>
Signed-off-by: Kukjin Kim <>
11 years agoMerge git://
Linus Torvalds [Fri, 21 Oct 2011 14:02:18 +0000 (17:02 +0300)]
Merge git://

* git://
  crypto: ghash - Avoid null pointer dereference if no key is set

11 years agoMerge branch 'fix/hda' of git://
Linus Torvalds [Fri, 21 Oct 2011 14:01:21 +0000 (17:01 +0300)]
Merge branch 'fix/hda' of git://

* 'fix/hda' of git://
  ALSA: HDA: conexant support for Lenovo T520/W520
  ALSA: hda - Add position_fix quirk for Dell Inspiron 1010

11 years agocrypto: ghash - Avoid null pointer dereference if no key is set
Nick Bowler [Thu, 20 Oct 2011 12:16:55 +0000 (14:16 +0200)]
crypto: ghash - Avoid null pointer dereference if no key is set

The ghash_update function passes a pointer to gf128mul_4k_lle which will
be NULL if ghash_setkey is not called or if the most recent call to
ghash_setkey failed to allocate memory.  This causes an oops.  Fix this
up by returning an error code in the null case.

This is trivially triggered from unprivileged userspace through the
AF_ALG interface by simply writing to the socket without setting a key.

The ghash_final function has a similar issue, but triggering it requires
a memory allocation failure in ghash_setkey _after_ at least one
successful call to ghash_update.

  BUG: unable to handle kernel NULL pointer dereference at 00000670
  IP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul]
  *pde = 00000000
  Oops: 0000 [#1] PREEMPT SMP
  Modules linked in: ghash_generic gf128mul algif_hash af_alg nfs lockd nfs_acl sunrpc bridge ipv6 stp llc

  Pid: 1502, comm: hashatron Tainted: G        W   3.1.0-rc9-00085-ge9308cf #32 Bochs Bochs
  EIP: 0060:[<d88c92d4>] EFLAGS: 00000202 CPU: 0
  EIP is at gf128mul_4k_lle+0x23/0x60 [gf128mul]
  EAX: d69db1f0 EBX: d6b8ddac ECX: 00000004 EDX: 00000000
  ESI: 00000670 EDI: d6b8ddac EBP: d6b8ddc8 ESP: d6b8dda4
   DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
  Process hashatron (pid: 1502, ti=d6b8c000 task=d6810000 task.ti=d6b8c000)
   00000000 d69db1f0 00000163 00000000 d6b8ddc8 c101a520 d69db1f0 d52aa000
   00000ff0 d6b8dde8 d88d310f d6b8a3f8 d52aa000 00001000 d88d502c d6b8ddfc
   00001000 d6b8ddf4 c11676ed d69db1e8 d6b8de24 c11679ad d52aa000 00000000
  Call Trace:
   [<c101a520>] ? kmap_atomic_prot+0x37/0xa6
   [<d88d310f>] ghash_update+0x85/0xbe [ghash_generic]
   [<c11676ed>] crypto_shash_update+0x18/0x1b
   [<c11679ad>] shash_ahash_update+0x22/0x36
   [<c11679cc>] shash_async_update+0xb/0xd
   [<d88ce0ba>] hash_sendpage+0xba/0xf2 [algif_hash]
   [<c121b24c>] kernel_sendpage+0x39/0x4e
   [<d88ce000>] ? 0xd88cdfff
   [<c121b298>] sock_sendpage+0x37/0x3e
   [<c121b261>] ? kernel_sendpage+0x4e/0x4e
   [<c10b4dbc>] pipe_to_sendpage+0x56/0x61
   [<c10b4e1f>] splice_from_pipe_feed+0x58/0xcd
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b51f5>] __splice_from_pipe+0x36/0x55
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b6383>] splice_from_pipe+0x51/0x64
   [<c10b63c2>] ? default_file_splice_write+0x2c/0x2c
   [<c10b63d5>] generic_splice_sendpage+0x13/0x15
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b527f>] do_splice_from+0x5d/0x67
   [<c10b6865>] sys_splice+0x2bf/0x363
   [<c129373b>] ? sysenter_exit+0xf/0x16
   [<c104dc1e>] ? trace_hardirqs_on_caller+0x10e/0x13f
   [<c129370c>] sysenter_do_call+0x12/0x32
  Code: 83 c4 0c 5b 5e 5f c9 c3 55 b9 04 00 00 00 89 e5 57 8d 7d e4 56 53 8d 5d e4 83 ec 18 89 45 e0 89 55 dc 0f b6 70 0f c1 e6 04 01 d6 <f3> a5 be 0f 00 00 00 4e 89 d8 e8 48 ff ff ff 8b 45 e0 89 da 0f
  EIP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] SS:ESP 0068:d6b8dda4
  CR2: 0000000000000670
  ---[ end trace 4eaa2a86a8e2da24 ]---
  note: hashatron[1502] exited with preempt_count 1
  BUG: scheduling while atomic: hashatron/1502/0x10000002
  INFO: lockdep is turned off.

Signed-off-by: Nick Bowler <>
Cc: [2.6.37+]
Signed-off-by: Herbert Xu <>
11 years agoARM: S5P: fix offset calculation on gpio-interrupt
Marek Szyprowski [Fri, 21 Oct 2011 09:04:54 +0000 (18:04 +0900)]
ARM: S5P: fix offset calculation on gpio-interrupt

Offsets of the irq controller registers were calculated
correctly only for first GPIO bank. This patch fixes
calculation of the register offsets for all GPIO banks.

Reported-by: Sylwester Nawrocki <>
Signed-off-by: Marek Szyprowski <>
Signed-off-by: Kyungmin Park <>
Signed-off-by: Kukjin Kim <>
11 years agoMerge git://
Linus Torvalds [Thu, 20 Oct 2011 19:16:28 +0000 (22:16 +0300)]
Merge git://git./linux/kernel/git/davem/sparc

* git://
  sparc: Add alignment flag to PCI expansion resources
  sparc: Avoid calling sigprocmask()
  sparc: Use set_current_blocked()
  sparc32,leon: SRMMU MMU Table probe fix

11 years agoMerge git://
Linus Torvalds [Thu, 20 Oct 2011 19:15:20 +0000 (22:15 +0300)]
Merge git://git./linux/kernel/git/davem/net

* git://
  fib_rules: fix unresolved_rules counting
  r8169: fix wrong eee setting for rlt8111evl
  r8169: fix driver shutdown WoL regression.
  ehea: Change maintainer to me
  pptp: pptp_rcv_core() misses pskb_may_pull() call
  tproxy: copy transparent flag when creating a time wait
  pptp: fix skb leak in pptp_xmit()
  bonding: use local function pointer of bond->recv_probe in bond_handle_frame
  smsc911x: Add support for SMSC LAN89218
  tg3: negate USE_PHYLIB flag check
  netconsole: enable netconsole can make net_device refcnt incorrent
  bluetooth: Properly clone LSM attributes to newly created child connections
  l2tp: fix a potential skb leak in l2tp_xmit_skb()
  bridge: fix hang on removal of bridge via netlink
  x25: Prevent skb overreads when checking call user data
  x25: Handle undersized/fragmented skbs
  x25: Validate incoming call user data lengths
  udplite: fast-path computation of checksum coverage
  IPVS netns shutdown/startup dead-lock
  netfilter: nf_conntrack: fix event flooding in GRE protocol tracker

11 years agohwmon: (w83627ehf) Fix negative 8-bit temperature values
Jean Delvare [Thu, 20 Oct 2011 07:06:45 +0000 (03:06 -0400)]
hwmon: (w83627ehf) Fix negative 8-bit temperature values

Since 8-bit temperature values are now handled in 16-bit struct
members, values have to be cast to s8 for negative temperatures to be
properly handled. This is broken since kernel version 2.6.39
(commit bce26c58df86599c9570cee83eac58bdaae760e4.)

Signed-off-by: Jean Delvare <>
Cc: Guenter Roeck <>
Cc: # 2.6.39+
Signed-off-by: Guenter Roeck <>
11 years agomm: fix race between mremap and removing migration entry
Hugh Dickins [Wed, 19 Oct 2011 19:50:35 +0000 (12:50 -0700)]
mm: fix race between mremap and removing migration entry

I don't usually pay much attention to the stale "? " addresses in
stack backtraces, but this lucky report from Pawel Sikora hints that
mremap's move_ptes() has inadequate locking against page migration.

 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page():
 kernel BUG at include/linux/swapops.h:105!
 RIP: 0010:[<ffffffff81127b76>]  [<ffffffff81127b76>]
  [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0
  [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120
  [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310
  [<ffffffff81102a31>] handle_mm_fault+0x181/0x310
  [<ffffffff81106097>] ? vma_adjust+0x537/0x570
  [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0
  [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570
  [<ffffffff81421d5f>] page_fault+0x1f/0x30

mremap's down_write of mmap_sem, together with i_mmap_mutex or lock,
and pagetable locks, were good enough before page migration (with its
requirement that every migration entry be found) came in, and enough
while migration always held mmap_sem; but not enough nowadays, when
there's memory hotremove and compaction.

The danger is that move_ptes() lets a migration entry dodge around
behind remove_migration_pte()'s back, so it's in the old location when
looking at the new, then in the new location when looking at the old.

Either mremap's move_ptes() must additionally take anon_vma lock(), or
migration's remove_migration_pte() must stop peeking for is_swap_entry()
before it takes pagetable lock.

Consensus chooses the latter: we prefer to add overhead to migration
than to mremapping, which gets used by JVMs and by exec stack setup.

Reported-and-tested-by: Paweł Sikora <>
Signed-off-by: Hugh Dickins <>
Acked-by: Andrea Arcangeli <>
Acked-by: Mel Gorman <>
Signed-off-by: Linus Torvalds <>
11 years agosparc: Add alignment flag to PCI expansion resources
Kjetil Oftedal [Wed, 19 Oct 2011 23:20:50 +0000 (16:20 -0700)]
sparc: Add alignment flag to PCI expansion resources

Currently no type of alignment is specified for PCI expansion roms while
parsing the openfirmware tree. This causes calls to pci_map_rom() to fail.
IORESOURCE_SIZEALIGN is the default alignment used for rom resouces in
pci/probe.c, and has been verified to work with various cards on a ultra 10.

Signed-off-By: Kjetil Oftedal <>
Signed-off-by: David S. Miller <>
11 years agofib_rules: fix unresolved_rules counting
Yan, Zheng [Mon, 17 Oct 2011 15:20:28 +0000 (15:20 +0000)]
fib_rules: fix unresolved_rules counting

we should decrease ops->unresolved_rules when deleting a unresolved rule.

Signed-off-by: Zheng Yan <>
Acked-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
11 years agor8169: fix wrong eee setting for rlt8111evl
hayeswang [Thu, 13 Oct 2011 20:14:37 +0000 (20:14 +0000)]
r8169: fix wrong eee setting for rlt8111evl

Correct the wrong parameter for setting EEE for RTL8111E-VL.

Signed-off-by: Hayes Wang <>
Signed-off-by: David S. Miller <>
11 years agor8169: fix driver shutdown WoL regression.
françois romieu [Fri, 14 Oct 2011 00:57:45 +0000 (00:57 +0000)]
r8169: fix driver shutdown WoL regression.

Due to commit 92fc43b4159b518f5baae57301f26d770b0834c9 ("r8169: modify the
flow of the hw reset."), rtl8169_hw_reset stomps during driver shutdown on
RxConfig bits which are needed for WOL on some versions of the hardware.

As these bits were formerly set from the r81{0x, 68}_pll_power_down methods,
factor them out for use in the driver shutdown (rtl_shutdown) handler.

I favored __rtl8169_get_wol() -hardware state indication- over
RTL_FEATURE_WOL as the latter has become a good candidate for removal.

Signed-off-by: Francois Romieu <>
Cc: Hayes <>
Tested-by: Marc Ballarin <>
Signed-off-by: David S. Miller <>
11 years agoehea: Change maintainer to me
Thadeu Lima de Souza Cascardo [Thu, 13 Oct 2011 09:56:19 +0000 (09:56 +0000)]
ehea: Change maintainer to me

Breno Leitao has passed the maintainership to me.

Signed-off-by: Thadeu Lima de Souza Cascardo <>
Cc: Breno Leitao <>
Acked-by: Breno Leitão <>
Signed-off-by: David S. Miller <>
11 years agoMerge branch 'v4l_for_linus' of git://
Linus Torvalds [Wed, 19 Oct 2011 13:44:11 +0000 (06:44 -0700)]
Merge branch 'v4l_for_linus' of git://

* 'v4l_for_linus' of git://
  [media] videodev: fix a NULL pointer dereference in v4l2_device_release()

11 years agoMerge branch 'drm-fixes' of git://
Linus Torvalds [Wed, 19 Oct 2011 13:43:24 +0000 (06:43 -0700)]
Merge branch 'drm-fixes' of git://

* 'drm-fixes' of git://
  drm/radeon/kms/atom: fix handling of FB scratch indices
  drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP bridges (v2)
  drm/radeon/kms/DCE4.1: ss is not supported on the internal pplls
  drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mapping
  ttm: Fix error-path using an uninitialized value

11 years ago[media] videodev: fix a NULL pointer dereference in v4l2_device_release()
Antonio Ospite [Wed, 12 Oct 2011 20:59:26 +0000 (17:59 -0300)]
[media] videodev: fix a NULL pointer dereference in v4l2_device_release()

The change in 8280b66 does not cover the case when v4l2_dev is already
NULL, fix that.

With a Kinect sensor, seen as an USB camera using GSPCA in this context,
a NULL pointer dereference BUG can be triggered by just unplugging the
device after the camera driver has been loaded.

Signed-off-by: Antonio Ospite <>
Signed-off-by: Mauro Carvalho Chehab <>
11 years agodrm/radeon/kms/atom: fix handling of FB scratch indices
Alex Deucher [Wed, 19 Oct 2011 00:10:05 +0000 (20:10 -0400)]
drm/radeon/kms/atom: fix handling of FB scratch indices

FB scratch indices are dword indices, but we were treating
them as byte indices.  As such, we were getting the wrong
FB scratch data for non-0 indices.  Fix the indices and
guard the indexing against indices larger than the scratch

Fixes memory corruption on some boards if data was written
past the end of the FB scratch array.

Signed-off-by: Alex Deucher <>
Reported-by: Dave Airlie <>
Tested-by: Dave Airlie <>
Signed-off-by: Dave Airlie <>
11 years agopptp: pptp_rcv_core() misses pskb_may_pull() call
Eric Dumazet [Mon, 17 Oct 2011 17:59:53 +0000 (17:59 +0000)]
pptp: pptp_rcv_core() misses pskb_may_pull() call

e1000e uses paged frags, so any layer incorrectly pulling bytes from skb
can trigger a BUG in skb_pull()

[951.142737]  [<ffffffff813d2f36>] skb_pull+0x15/0x17
[951.142737]  [<ffffffffa0286824>] pptp_rcv_core+0x126/0x19a [pptp]
[951.152725]  [<ffffffff813d17c4>] sk_receive_skb+0x69/0x105
[951.163558]  [<ffffffffa0286993>] pptp_rcv+0xc8/0xdc [pptp]
[951.165092]  [<ffffffffa02800a3>] gre_rcv+0x62/0x75 [gre]
[951.165092]  [<ffffffff81410784>] ip_local_deliver_finish+0x150/0x1c1
[951.177599]  [<ffffffff81410634>] ? ip_local_deliver_finish+0x0/0x1c1
[951.177599]  [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58
[951.177599]  [<ffffffff81410996>] ip_local_deliver+0x51/0x55
[951.177599]  [<ffffffff814105b9>] ip_rcv_finish+0x31a/0x33e
[951.177599]  [<ffffffff8141029f>] ? ip_rcv_finish+0x0/0x33e
[951.204898]  [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58
[951.214651]  [<ffffffff81410bb5>] ip_rcv+0x21b/0x246

pptp_rcv_core() is a nice example of a function assuming everything it
needs is available in skb head.

Reported-by: Bradley Peterson <>
Signed-off-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
11 years agotproxy: copy transparent flag when creating a time wait
KOVACS Krisztian [Tue, 18 Oct 2011 10:17:35 +0000 (10:17 +0000)]
tproxy: copy transparent flag when creating a time wait

The transparent socket option setting was not copied to the time wait
socket when an inet socket was being replaced by a time wait socket. This
broke the --transparent option of the socket match and may have caused
that FIN packets belonging to sockets in FIN_WAIT2 or TIME_WAIT state
were being dropped by the packet filter.

Signed-off-by: KOVACS Krisztian <>
Signed-off-by: David S. Miller <>
11 years agopptp: fix skb leak in pptp_xmit()
Eric Dumazet [Mon, 17 Oct 2011 17:01:47 +0000 (17:01 +0000)]
pptp: fix skb leak in pptp_xmit()

In case we cant transmit skb, we must free it

Signed-off-by: Eric Dumazet <>
CC: Dmitry Kozlov <>
Signed-off-by: David S. Miller <>
11 years agobonding: use local function pointer of bond->recv_probe in bond_handle_frame
Mitsuo Hayasaka [Wed, 12 Oct 2011 16:04:29 +0000 (16:04 +0000)]
bonding: use local function pointer of bond->recv_probe in bond_handle_frame

The bond->recv_probe is called in bond_handle_frame() when
a packet is received, but bond_close() sets it to NULL. So,
a panic occurs when both functions work in parallel.

Why this happen:
After null pointer check of bond->recv_probe, an sk_buff is
duplicated and bond->recv_probe is called in bond_handle_frame.
So, a panic occurs when bond_close() is called between the
check and call of bond->recv_probe.

This patch uses a local function pointer of bond->recv_probe
in bond_handle_frame(). So, it can avoid the null pointer

Signed-off-by: Mitsuo Hayasaka <>
Cc: Jay Vosburgh <>
Cc: Andy Gospodarek <>
Cc: Eric Dumazet <>
Cc: WANG Cong <>
Acked-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
11 years agosmsc911x: Add support for SMSC LAN89218
Phil Edworthy [Wed, 12 Oct 2011 02:29:39 +0000 (02:29 +0000)]
smsc911x: Add support for SMSC LAN89218

LAN89218 is register compatible with LAN911x.

Signed-off-by: Phil Edworthy <>
Signed-off-by: David S. Miller <>
11 years agotg3: negate USE_PHYLIB flag check
Jiri Pirko [Tue, 11 Oct 2011 23:00:41 +0000 (23:00 +0000)]
tg3: negate USE_PHYLIB flag check

USE_PHYLIB flag in tg3_remove_one() is being checked incorrectly. This
results tg3_phy_fini->phy_disconnect is never called and when tg3 module
is removed.

In my case this resulted in panics in phy_state_machine calling function

So correct this check.

Signed-off-by: Jiri Pirko <>
Acked-by: Matt Carlson <>
Signed-off-by: David S. Miller <>
11 years agonetconsole: enable netconsole can make net_device refcnt incorrent
Gao feng [Tue, 11 Oct 2011 16:08:11 +0000 (16:08 +0000)]
netconsole: enable netconsole can make net_device refcnt incorrent

There is no check if netconsole is enabled current.
so when exec echo 1 > enabled;
the reference of net_device will increment always.

Signed-off-by: Gao feng <>
Acked-by: Flavio Leitner <>
Signed-off-by: David S. Miller <>
11 years agobluetooth: Properly clone LSM attributes to newly created child connections
Paul Moore [Fri, 7 Oct 2011 09:40:59 +0000 (09:40 +0000)]
bluetooth: Properly clone LSM attributes to newly created child connections

The Bluetooth stack has internal connection handlers for all of the various
Bluetooth protocols, and unfortunately, they are currently lacking the LSM
hooks found in the core network stack's connection handlers.  I say
unfortunately, because this can cause problems for users who have have an
LSM enabled and are using certain Bluetooth devices.  See one problem
report below:


In order to keep things simple at this point in time, this patch fixes the
problem by cloning the parent socket's LSM attributes to the newly created
child socket.  If we decide we need a more elaborate LSM marking mechanism
for Bluetooth (I somewhat doubt this) we can always revisit this decision
in the future.

Reported-by: James M. Cape <>
Signed-off-by: Paul Moore <>
Acked-by: James Morris <>
Signed-off-by: David S. Miller <>
11 years agol2tp: fix a potential skb leak in l2tp_xmit_skb()
Eric Dumazet [Fri, 7 Oct 2011 05:35:46 +0000 (05:35 +0000)]
l2tp: fix a potential skb leak in l2tp_xmit_skb()

l2tp_xmit_skb() can leak one skb if skb_cow_head() returns an error.

Signed-off-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
11 years agobridge: fix hang on removal of bridge via netlink
stephen hemminger [Thu, 6 Oct 2011 11:19:41 +0000 (11:19 +0000)]
bridge: fix hang on removal of bridge via netlink

Need to cleanup bridge device timers and ports when being bridge
device is being removed via netlink.

This fixes the problem of observed when doing:
 ip link add br0 type bridge
 ip link set dev eth1 master br0
 ip link set br0 up
 ip link del br0

which would cause br0 to hang in unregister_netdev because
of leftover reference count.

Reported-by: Sridhar Samudrala <>
Signed-off-by: Stephen Hemminger <>
Acked-by: Sridhar Samudrala <>
Signed-off-by: David S. Miller <>
11 years agocputimer: Cure lock inversion
Peter Zijlstra [Mon, 17 Oct 2011 09:50:30 +0000 (11:50 +0200)]
cputimer: Cure lock inversion

There's a lock inversion between the cputimer->lock and rq->lock;
notably the two callchains involved are:



Where the first one is enabling a CLOCK_PROCESS_CPUTIME_ID timer, and
the second one is keeping up-to-date.

This problem was introduced by e8abccb7193 ("posix-cpu-timers: Cure
SMP accounting oddities").

Cure the problem by removing the cputimer->lock and rq->lock nesting,
this leaves concurrent enablers doing duplicate work, but the time
wasted should be on the same order otherwise wasted spinning on the
lock and the greater-than assignment filter should ensure we preserve

Reported-by: Dave Jones <>
Reported-by: Simon Kirby <>
Signed-off-by: Peter Zijlstra <>
Cc: Linus Torvalds <>
Cc: Martin Schwidefsky <>
Signed-off-by: Thomas Gleixner <>
11 years agodrm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP bridges (v2)
Alex Deucher [Wed, 12 Oct 2011 22:49:53 +0000 (18:49 -0400)]
drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP bridges (v2)

Settings in this table reflect the physical panel/connector rather
than the internal dig encoding.

v2: fix typo for DRM_MODE_CONNECTOR_VGA case.

Signed-off-by: Alex Deucher <>
Signed-off-by: Dave Airlie <>
11 years agodrm/radeon/kms/DCE4.1: ss is not supported on the internal pplls
Alex Deucher [Wed, 12 Oct 2011 22:44:33 +0000 (18:44 -0400)]
drm/radeon/kms/DCE4.1: ss is not supported on the internal pplls

It's handled via external clock.  It should already be protected
by the external ss flag, but add an explicit check just in case.

Signed-off-by: Alex Deucher <>
Signed-off-by: Dave Airlie <>
11 years agodrm/radeon/kms/DCE4.1: fix dig encoder to transmitter mapping
Alex Deucher [Wed, 12 Oct 2011 22:44:32 +0000 (18:44 -0400)]
drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mapping

llano has fully routeable dig encoders similar to DCE3.2 while
ontario has a hardcoded mapping similar to DCE4.0.

Signed-off-by: Alex Deucher <>
Signed-off-by: Dave Airlie <>
11 years agoALSA: HDA: conexant support for Lenovo T520/W520
Daniel Suchy [Tue, 18 Oct 2011 09:09:44 +0000 (11:09 +0200)]
ALSA: HDA: conexant support for Lenovo T520/W520

This is patch for Conexant codec of Intel HDA driver, adding new quirk
for Lenovo Thinkpad T520 and W520. Conexant autodetection works fine for
T520 (similar subsystem ID is used also in W520 model) and detects more
mixer features compared to generic (fallback) Lenovo quirk with
hardcoded options in Conexant codec.

Patch was activelly tested with Linux 3.0.4, 3.0.6 and 3.0.7 without any

Signed-off-by: Daniel Suchy <>
Cc: <> [3.0+]
Signed-off-by: Takashi Iwai <>
11 years agoALSA: hda - Add position_fix quirk for Dell Inspiron 1010
Takashi Iwai [Tue, 18 Oct 2011 08:44:05 +0000 (10:44 +0200)]
ALSA: hda - Add position_fix quirk for Dell Inspiron 1010

The previous fix for the position-buffer check gives yet another
regression on a Dell laptop.  The safest fix right now is to add a
static quirk for this device (and better to apply it for stable
kernels too).

Reported-by: Éric Piel <>
Cc: <>
Signed-off-by: Takashi Iwai <>
11 years agottm: Fix error-path using an uninitialized value
Thomas Hellstrom [Mon, 17 Oct 2011 11:27:34 +0000 (13:27 +0200)]
ttm: Fix error-path using an uninitialized value

Pointed out by Michel Daenzer.

Signed-off-by: Thomas Hellstrom <>
Signed-off-by: Dave Airlie <>
11 years agoLinux 3.1-rc10 v3.1-rc10
Linus Torvalds [Tue, 18 Oct 2011 04:06:23 +0000 (21:06 -0700)]
Linux 3.1-rc10

11 years agoMerge branch 'nf' of git://
David S. Miller [Mon, 17 Oct 2011 23:38:03 +0000 (19:38 -0400)]
Merge branch 'nf' of git://

11 years agox25: Prevent skb overreads when checking call user data
Matthew Daley [Fri, 14 Oct 2011 18:45:05 +0000 (18:45 +0000)]
x25: Prevent skb overreads when checking call user data

x25_find_listener does not check that the amount of call user data given
in the skb is big enough in per-socket comparisons, hence buffer
overreads may occur.  Fix this by adding a check.

Signed-off-by: Matthew Daley <>
Cc: Eric Dumazet <>
Cc: Andrew Hendry <>
Cc: stable <>
Acked-by: Andrew Hendry <>
Signed-off-by: David S. Miller <>
11 years agox25: Handle undersized/fragmented skbs
Matthew Daley [Fri, 14 Oct 2011 18:45:04 +0000 (18:45 +0000)]
x25: Handle undersized/fragmented skbs

There are multiple locations in the X.25 packet layer where a skb is
assumed to be of at least a certain size and that all its data is
currently available at skb->data.  These assumptions are not checked,
hence buffer overreads may occur.  Use pskb_may_pull to check these
minimal size assumptions and ensure that data is available at skb->data
when necessary, as well as use skb_copy_bits where needed.

Signed-off-by: Matthew Daley <>
Cc: Eric Dumazet <>
Cc: Andrew Hendry <>
Cc: stable <>
Acked-by: Andrew Hendry <>
Signed-off-by: David S. Miller <>
11 years agox25: Validate incoming call user data lengths
Matthew Daley [Fri, 14 Oct 2011 18:45:03 +0000 (18:45 +0000)]
x25: Validate incoming call user data lengths

X.25 call user data is being copied in its entirety from incoming messages
without consideration to the size of the destination buffers, leading to
possible buffer overflows. Validate incoming call user data lengths before
these copies are performed.

It appears this issue was noticed some time ago, however nothing seemed to
come of it: see and
commit 8db09f26f912f7c90c764806e804b558da520d4f.

Signed-off-by: Matthew Daley <>
Acked-by: Eric Dumazet <>
Tested-by: Andrew Hendry <>
Cc: stable <>
Signed-off-by: David S. Miller <>
11 years agoudplite: fast-path computation of checksum coverage
Gerrit Renker [Mon, 17 Oct 2011 23:07:30 +0000 (19:07 -0400)]
udplite: fast-path computation of checksum coverage

Commit 903ab86d195cca295379699299c5fc10beba31c7 of 1 March this year ("udp: Add
lockless transmit path") introduced a new fast TX path that broke the checksum
coverage computation of UDP-lite, which so far depended on up->len (only set
if the socket is locked and 0 in the fast path).

Fixed by providing both fast- and slow-path computation of checksum coverage.
The latter can be removed when UDP(-lite)v6 also uses a lockless transmit path.

Reported-by: Thomas Volkert <>
Signed-off-by: Gerrit Renker <>
Signed-off-by: David S. Miller <>
11 years agoAvoid using variable-length arrays in kernel/sys.c
Linus Torvalds [Mon, 17 Oct 2011 15:24:24 +0000 (08:24 -0700)]
Avoid using variable-length arrays in kernel/sys.c

The size is always valid, but variable-length arrays generate worse code
for no good reason (unless the function happens to be inlined and the
compiler sees the length for the simple constant it is).

Also, there seems to be some code generation problem on POWER, where
Henrik Bakken reports that register r28 can get corrupted under some
subtle circumstances (interrupt happening at the wrong time?).  That all
indicates some seriously broken compiler issues, but since variable
length arrays are bad regardless, there's little point in trying to
chase it down.

"Just don't do that, then".

Reported-by: Henrik Grindal Bakken <>
Cc: Benjamin Herrenschmidt <>
Signed-off-by: Linus Torvalds <>
11 years agoMerge branch 'fixes' of
Linus Torvalds [Sun, 16 Oct 2011 20:08:27 +0000 (13:08 -0700)]
Merge branch 'fixes' of

* 'fixes' of
  ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUS
  ARM: 7122/1: localtimer: add header linux/errno.h explicitly
  ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9
  ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGES

11 years agoARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUS
Zoltan Devai [Mon, 10 Oct 2011 13:54:12 +0000 (14:54 +0100)]
ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUS

This is unneeded and causes an abort on the SPMP8000 platform.

Acked-by: Linus Walleij <>
Signed-off-by: Zoltan Devai <>
Signed-off-by: Russell King <>
11 years agoARM: 7122/1: localtimer: add header linux/errno.h explicitly
Shawn Guo [Thu, 6 Oct 2011 13:57:24 +0000 (14:57 +0100)]
ARM: 7122/1: localtimer: add header linux/errno.h explicitly

Per the text in  Documentation/SubmitChecklist as below, we should
explicitly have header linux/errno.h in localtimer.h for ENXIO

1: If you use a facility then #include the file that defines/declares
   that facility.  Don't depend on other header files pulling in ones
   that you use.

Otherwise, we may run into some compiling error like the following one,
if any file includes localtimer.h without CONFIG_LOCAL_TIMERS defined.

  arch/arm/include/asm/localtimer.h: In function ‘local_timer_setup’:
  arch/arm/include/asm/localtimer.h:53:10: error: ‘ENXIO’ undeclared (first use in this function)

Signed-off-by: Shawn Guo <>
Signed-off-by: Russell King <>
11 years agoARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9
Will Deacon [Mon, 3 Oct 2011 17:30:53 +0000 (18:30 +0100)]
ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9

Using COHERENT_LINE_{MISS,HIT} for cache misses and references
respectively is completely wrong. Instead, use the L1D events which
are a better and more useful approximation despite ignoring instruction

Reported-by: Alasdair Grant <>
Reported-by: Matt Horsnell <>
Reported-by: Michael Williams <>
Cc: Jean Pihet <>
Signed-off-by: Will Deacon <>
Signed-off-by: Russell King <>
11 years agoMerge branch 'hwmon-for-linus' of git://
Linus Torvalds [Fri, 14 Oct 2011 20:29:09 +0000 (08:29 +1200)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://
  hwmon: (w83627ehf) Properly report thermal diode sensors

11 years agoMerge branch 'gpio/merge' of git://
Linus Torvalds [Fri, 14 Oct 2011 05:07:52 +0000 (17:07 +1200)]
Merge branch 'gpio/merge' of git://

* 'gpio/merge' of git://
  gpio-pca953x: fix gpio_base
  gpio/omap: fix build error with certain OMAP1 configs

11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Fri, 14 Oct 2011 05:06:39 +0000 (17:06 +1200)]
Merge branch 'for-linus' of git://

* 'for-linus' of git://
  xfs: revert to using a kthread for AIL pushing
  xfs: force the log if we encounter pinned buffers in .iop_pushbuf
  xfs: do not update xa_last_pushed_lsn for locked items

11 years agoMerge branch 'stable' of git://
Linus Torvalds [Fri, 14 Oct 2011 04:59:11 +0000 (16:59 +1200)]
Merge branch 'stable' of git://

* 'stable' of git://
  tile: revert change from <asm/atomic.h> to <linux/atomic.h> in asm files

11 years agoMerge branch 'x86-urgent-for-linus' of git://
Linus Torvalds [Fri, 14 Oct 2011 04:54:56 +0000 (16:54 +1200)]
Merge branch 'x86-urgent-for-linus' of git://

* 'x86-urgent-for-linus' of git://
  x86: Default to vsyscall=native for now

11 years agox86, mrst: use a temporary variable for SFI irq
Mika Westerberg [Thu, 13 Oct 2011 09:04:20 +0000 (12:04 +0300)]
x86, mrst: use a temporary variable for SFI irq

SFI tables reside in RAM and should not be modified once they are
written.  Current code went to set pentry->irq to zero which causes
subsequent reads to fail with invalid SFI table checksum.  This will
break kexec as the second kernel fails to validate SFI tables.

To fix this we use temporary variable for irq number.

Signed-off-by: Mika Westerberg <>
Reviewed-by: Kirill A. Shutemov <>
Signed-off-by: Linus Torvalds <>
11 years agohwmon: (w83627ehf) Properly report thermal diode sensors
Jean Delvare [Thu, 13 Oct 2011 19:49:08 +0000 (15:49 -0400)]
hwmon: (w83627ehf) Properly report thermal diode sensors

The w83627ehf driver is improperly reporting thermal diode sensors as
type 2, instead of 3. This caused "sensors" and possibly other
monitoring tools to report these sensors as "transistor" instead of
"thermal diode".

Furthermore, diode subtype selection (CPU vs. external) is only
supported by the original W83627EHF/EHG. All later models only support
CPU diode type, and some (NCT6776F) don't even have the register in
question so we should avoid reading from it.

Signed-off-by: Jean Delvare <>
Signed-off-by: Guenter Roeck <>
11 years agogpio-pca953x: fix gpio_base
Hartmut Knaack [Mon, 10 Oct 2011 22:22:45 +0000 (00:22 +0200)]
gpio-pca953x: fix gpio_base

gpio_base was set to 0 if no system platform data or open firmware
platform data was provided. This led to conflicts, if any other gpiochip
with a gpiobase of 0 was instantiated already. Setting it to -1 will
automatically use the first one available.

Signed-off-by: Hartmut Knaack <>
Signed-off-by: Grant Likely <>
11 years agogpio/omap: fix build error with certain OMAP1 configs
Janusz Krzysztofik [Tue, 23 Aug 2011 11:42:24 +0000 (13:42 +0200)]
gpio/omap: fix build error with certain OMAP1 configs

With commit f64ad1a0e21a, "gpio/omap: cleanup _set_gpio_wakeup(), remove
ifdefs", access to build time conditionally omitted 'suspend_wakeup'
member of the 'gpio_bank' structure has been placed unconditionally in
function _set_gpio_wakeup(), which is always built. This resulted in the
driver compilation broken for certain OMAP1, i.e., non-OMAP16xx,

Really required or not in previously excluded cases, define this
structure member unconditionally as a fix.

Tested with a custom OMAP1510 only configuration.

Signed-off-by: Janusz Krzysztofik <>
Acked-by: Kevin Hilman <>
Tested-by: Aaro Koskinen <>
Signed-off-by: Grant Likely <>
11 years agotile: revert change from <asm/atomic.h> to <linux/atomic.h> in asm files
Chris Metcalf [Wed, 5 Oct 2011 21:09:29 +0000 (17:09 -0400)]
tile: revert change from <asm/atomic.h> to <linux/atomic.h> in asm files

The 32-bit TILEPro support uses some #defines in <asm/atomic_32.h>
for atomic support routines in assembly.  To make this more explicit,
I've turned those includes into includes of <asm/atomic_32.h>, which
should hopefully make it clear that they shouldn't be bombed into
<linux/atomic.h> in any cleanups.

Signed-off-by: Chris Metcalf <>
11 years agoMerge git://
Linus Torvalds [Thu, 13 Oct 2011 06:25:45 +0000 (18:25 +1200)]
Merge git://git./linux/kernel/git/davem/net

* git://
  mscan: too much data copied to CAN frame due to 16 bit accesses
  gro: refetch inet6_protos[] after pulling ext headers
  bnx2x: fix cl_id allocation for non-eth clients for NPAR mode
  mlx4_en: fix endianness with blue frame support

11 years agoide: Fix file references in drivers/ide/
Johann Felix Soden [Mon, 10 Oct 2011 18:37:00 +0000 (11:37 -0700)]
ide: Fix file references in drivers/ide/

Fix file references in drivers/ide/

There are a lot of file references to now moved or deleted files in the
whole tree, especially in documentation and Kconfig files.  This patch
fixes the references in drivers/ide/.

Signed-off-by: Johann Felix Soden <>
Signed-off-by: Randy Dunlap <>
Acked-by: David S. Miller <>
Signed-off-by: Linus Torvalds <>
11 years agoMerge branch 'btrfs-3.0' of git://
Linus Torvalds [Thu, 13 Oct 2011 06:20:40 +0000 (18:20 +1200)]
Merge branch 'btrfs-3.0' of git://

* 'btrfs-3.0' of git://
  Btrfs: make sure not to defrag extents past i_size
  Btrfs: fix recursive auto-defrag

11 years agosparc: Avoid calling sigprocmask()
David S. Miller [Wed, 12 Oct 2011 19:27:35 +0000 (12:27 -0700)]
sparc: Avoid calling sigprocmask()

Use set_current_blocked() instead.

Signed-off-by: David S. Miller <>
11 years agosparc: Use set_current_blocked()
Matt Fleming [Thu, 11 Aug 2011 13:57:02 +0000 (14:57 +0100)]
sparc: Use set_current_blocked()

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Cc: Oleg Nesterov <>
Cc: "David S. Miller" <>
Signed-off-by: Matt Fleming <>
Signed-off-by: David S. Miller <>
11 years agoIPVS netns shutdown/startup dead-lock
Hans Schillstrom [Tue, 11 Oct 2011 01:54:35 +0000 (10:54 +0900)]
IPVS netns shutdown/startup dead-lock

ip_vs_mutext is used by both netns shutdown code and startup
and both implicit uses sk_lock-AF_INET mutex.

cleanup CPU-1         startup CPU-2
ip_vs_dst_event()     ip_vs_genl_set_cmd()
 sk_lock-AF_INET     __ip_vs_mutex

A new mutex placed in ip_vs netns struct called sync_mutex is added.

Comments from Julian and Simon added.
This patch has been running for more than 3 month now and it seems to work.

Ver. 3
    IP_VS_SO_GET_DAEMON in do_ip_vs_get_ctl protected by sync_mutex
    instead of __ip_vs_mutex as sugested by Julian.

Signed-off-by: Hans Schillstrom <>
Acked-by: Julian Anastasov <>
Signed-off-by: Simon Horman <>
Signed-off-by: Pablo Neira Ayuso <>
11 years agoxfs: revert to using a kthread for AIL pushing
Christoph Hellwig [Tue, 11 Oct 2011 15:14:10 +0000 (11:14 -0400)]
xfs: revert to using a kthread for AIL pushing

Currently we have a few issues with the way the workqueue code is used to
implement AIL pushing:

 - it accidentally uses the same workqueue as the syncer action, and thus
   can be prevented from running if there are enough sync actions active
   in the system.
 - it doesn't use the HIGHPRI flag to queue at the head of the queue of
   work items

At this point I'm not confident enough in getting all the workqueue flags and
tweaks right to provide a perfectly reliable execution context for AIL
pushing, which is the most important piece in XFS to make forward progress
when the log fills.

Revert back to use a kthread per filesystem which fixes all the above issues
at the cost of having a task struct and stack around for each mounted
filesystem.  In addition this also gives us much better ways to diagnose
any issues involving hung AIL pushing and removes a small amount of code.

Signed-off-by: Christoph Hellwig <>
Reported-by: Stefan Priebe <>
Tested-by: Stefan Priebe <>
Reviewed-by: Dave Chinner <>
Signed-off-by: Alex Elder <>
11 years agoxfs: force the log if we encounter pinned buffers in .iop_pushbuf
Christoph Hellwig [Tue, 11 Oct 2011 15:14:09 +0000 (15:14 +0000)]
xfs: force the log if we encounter pinned buffers in .iop_pushbuf

We need to check for pinned buffers even in .iop_pushbuf given that inode
items flush into the same buffers that may be pinned directly due operations
on the unlinked inode list operating directly on buffers.  To do this add a
return value to .iop_pushbuf that tells the AIL push about this and use
the existing log force mechanisms to unpin it.

Signed-off-by: Christoph Hellwig <>
Reported-by: Stefan Priebe <>
Tested-by: Stefan Priebe <>
Reviewed-by: Dave Chinner <>
Signed-off-by: Alex Elder <>
11 years agoxfs: do not update xa_last_pushed_lsn for locked items
Christoph Hellwig [Tue, 11 Oct 2011 15:14:08 +0000 (15:14 +0000)]
xfs: do not update xa_last_pushed_lsn for locked items

If an item was locked we should not update xa_last_pushed_lsn and thus skip
it when restarting the AIL scan as we need to be able to lock and write it
out as soon as possible.  Otherwise heavy lock contention might starve AIL
pushing too easily, especially given the larger backoff once we moved
xa_last_pushed_lsn all the way to the target lsn.

Signed-off-by: Christoph Hellwig <>
Reported-by: Stefan Priebe <>
Tested-by: Stefan Priebe <>
Reviewed-by: Dave Chinner <>
Signed-off-by: Alex Elder <>
11 years agoBtrfs: make sure not to defrag extents past i_size
Chris Mason [Tue, 11 Oct 2011 15:41:40 +0000 (11:41 -0400)]
Btrfs: make sure not to defrag extents past i_size

The btrfs file defrag code will loop through the extents and
force COW on them.  But there is a concurrent truncate in the middle of
the defrag, it might end up defragging the same range over and over

The problem is that writepage won't go through and do anything on pages
past i_size, so the cow won't happen, so the file will appear to still
be fragmented.  defrag will end up hitting the same extents again and

In the worst case, the truncate can actually live lock with the defrag
because the defrag keeps creating new ordered extents which the truncate
code keeps waiting on.

The fix here is to make defrag check for i_size inside the main loop,
instead of just once before the looping starts.

Signed-off-by: Chris Mason <>
11 years agox86: Default to vsyscall=native for now
Adrian Bunk [Wed, 5 Oct 2011 21:40:47 +0000 (00:40 +0300)]
x86: Default to vsyscall=native for now

This UML breakage:

  linux-[3800] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb9c498 ax:ffffffffff600000 si:0 di:606790
  linux-[3856] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb13168 ax:ffffffffff600000 si:0 di:606790

Is caused by commit 3ae36655 ("x86-64: Rework vsyscall emulation and add
vsyscall= parameter") - the vsyscall emulation code is not fully cooked
yet as UML relies on some rather fragile SIGSEGV semantics.

Linus suggested in to default
to vsyscall=native for now, this patch implements that.

Signed-off-by: Adrian Bunk <>
Acked-by: Andrew Lutomirski <>
Cc: H. Peter Anvin <>
Signed-off-by: Ingo Molnar <>
11 years agoBtrfs: fix recursive auto-defrag
Li Zefan [Mon, 10 Oct 2011 19:43:34 +0000 (15:43 -0400)]
Btrfs: fix recursive auto-defrag

Follow those steps:

  # mount -o autodefrag /dev/sda7 /mnt
  # dd if=/dev/urandom of=/mnt/tmp bs=200K count=1
  # sync
  # dd if=/dev/urandom of=/mnt/tmp bs=8K count=1 conv=notrunc

and then it'll go into a loop: writeback -> defrag -> writeback ...

It's because writeback writes [8K, 200K] and then writes [0, 8K].

I tried to make writeback know if the pages are dirtied by defrag,
but the patch was a bit intrusive. Here I simply set writeback_index
when we defrag a file.

Signed-off-by: Li Zefan <>
Signed-off-by: Chris Mason <>
11 years agomscan: too much data copied to CAN frame due to 16 bit accesses
Wolfgang Grandegger [Fri, 7 Oct 2011 09:28:14 +0000 (09:28 +0000)]
mscan: too much data copied to CAN frame due to 16 bit accesses

Due to the 16 bit access to mscan registers there's too much data copied to
the zero initialized CAN frame when having an odd number of bytes to copy.
This patch ensures that only the requested bytes are copied by using an
8 bit access for the remaining byte.

Reported-by: Andre Naujoks <>
Signed-off-by: Oliver Hartkopp <>
Signed-off-by: Wolfgang Grandegger <>
Signed-off-by: David S. Miller <>
11 years agogro: refetch inet6_protos[] after pulling ext headers
Yan, Zheng [Sat, 8 Oct 2011 22:34:35 +0000 (22:34 +0000)]
gro: refetch inet6_protos[] after pulling ext headers

ipv6_gro_receive() doesn't update the protocol ops after pulling
the ext headers. It looks like a typo.

Signed-off-by: Zheng Yan <>
Acked-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
11 years agobnx2x: fix cl_id allocation for non-eth clients for NPAR mode
Dmitry Kravkov [Sun, 9 Oct 2011 23:57:36 +0000 (23:57 +0000)]
bnx2x: fix cl_id allocation for non-eth clients for NPAR mode

There are some consolidations of NPAR configuration
when FCoE and iSCSI L2 clients will get the same id,
in this case FCoE ring will be non-functional.

Signed-off-by: Dmitry Kravkov <>
Signed-off-by: Eilon Greenstein <>
Signed-off-by: David S. Miller <>
11 years agomlx4_en: fix endianness with blue frame support
Thadeu Lima de Souza Cascardo [Mon, 10 Oct 2011 06:42:23 +0000 (06:42 +0000)]
mlx4_en: fix endianness with blue frame support

The doorbell register was being unconditionally swapped. In x86, that
meant it was being swapped to BE and written to the descriptor and to
memory, depending on the case of blue frame support or writing to
doorbell register. On PPC, this meant it was being swapped to LE and
then swapped back to BE while writing to the register. But in the blue
frame case, it was being written as LE to the descriptor.

The fix is not to swap doorbell unconditionally, write it to the
register as BE and convert it to BE when writing it to the descriptor.

Signed-off-by: Thadeu Lima de Souza Cascardo <>
Reported-by: Richard Hendrickson <>
Cc: Eli Cohen <>
Cc: Yevgeny Petrilin <>
Cc: Benjamin Herrenschmidt <>
Signed-off-by: David S. Miller <>
11 years agoMerge git://
Linus Torvalds [Mon, 10 Oct 2011 02:53:11 +0000 (14:53 +1200)]
Merge git://

* git://
  [CIFS] Fix first time message on mount, ntlmv2 upgrade delayed to 3.2

11 years agoMerge branch 'fixes' of git://
Linus Torvalds [Mon, 10 Oct 2011 02:48:27 +0000 (14:48 +1200)]
Merge branch 'fixes' of git://

* 'fixes' of git://
  ARM: mach-ux500: enable fix for ARM errata 754322
  ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_init
  ARM: OMAP: Fix i2c init for twl4030
  ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1

11 years agoARM: tegra: fix compilation error due to mach/hardware.h removal
Marc Dietrich [Fri, 7 Oct 2011 15:31:41 +0000 (08:31 -0700)]
ARM: tegra: fix compilation error due to mach/hardware.h removal

This fixes a compilation error in cpu-tegra.c which was introduced in
dc8d966bccde ("ARM: convert PCI defines to variables") which removed the
now obsolete mach/hardware.h from the mach-tegra subtree.

Signed-off-by: Marc Dietrich <>
Signed-off-by: Olof Johansson <>
Cc: Sergei Shtylyov <>
Signed-off-by: Linus Torvalds <>
11 years agoMerge branch 'drm-fixes' of git://
Linus Torvalds [Mon, 10 Oct 2011 02:43:06 +0000 (14:43 +1200)]
Merge branch 'drm-fixes' of git://

* 'drm-fixes' of git://
  drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1
  drm/radeon/kms: fix dp_detect handling for DP bridge chips
  drm/radeon/kms: retry aux transactions if there are status flags

11 years agoMAINTAINERS: Update tegra maintainer information
Olof Johansson [Fri, 7 Oct 2011 20:27:48 +0000 (13:27 -0700)]
MAINTAINERS: Update tegra maintainer information

A couple of changes to the Tegra maintainership setup:

I'm very glad to bring on Stephen Warren on board as a maintainer. The
work he has done so far is excellent, and the fact that he works for
Nvidia means he has long-term interest in the platform.

Erik Gilling did an astounding amount of work on getting things up and
running but has been a silent partner on the maintainership side for a
while, and is stepping down. Thanks for your contributions so far, Erik.

Finally, update the git URL since I'll take over running the main repo
for a while.

Overall maintainership model isn't changing much at this time: We'll all
three review patches as appropriate, and one of us will collect the main
repo (me at this time).

Signed-off-by: Olof Johansson <>
Cc: Erik Gilling <>
Acked-by: Colin Cross <>
Acked-by: Stephen Warren <>
Signed-off-by: Linus Torvalds <>
11 years agoMerge branch 'upstream' of git://
Linus Torvalds [Mon, 10 Oct 2011 02:39:03 +0000 (14:39 +1200)]
Merge branch 'upstream' of git://

* 'upstream' of git:// (29 commits)
  MIPS: Call oops_enter, oops_exit in die
  staging/octeon: Software should check the checksum of no tcp/udp packets
  MIPS: Octeon: Enable C0_UserLocal probing.
  MIPS: No branches in delay slots for huge pages in handle_tlbl
  MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC
  MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2)
  MIPS: Compat: Use 32-bit wrapper for compat_sys_futex.
  MIPS: Alchemy: DB1200: Disable cascade IRQ in handler
  SERIAL: Lantiq: Set timeout in uart_port
  MIPS: Lantiq: Fix setting the PCI bus speed on AR9
  MIPS: Lantiq: Fix external interrupt sources
  MIPS: tlbex: Fix build error in R3000 code.
  MIPS: Alchemy: Include Au1100 in PM code.
  MIPS: Alchemy: Fix typo in MAC0 registration
  MIPS: MSP71xx: Fix build error.
  MIPS: Handle __put_user() sleeping.
  MIPS: Allow forced irq threading
  MIPS: i8259: Mark cascade interrupt non-threaded

11 years agoMerge branch 'omap/fixes-for-3.1' into fixes
Arnd Bergmann [Sat, 8 Oct 2011 20:21:07 +0000 (22:21 +0200)]
Merge branch 'omap/fixes-for-3.1' into fixes

11 years ago[CIFS] Fix first time message on mount, ntlmv2 upgrade delayed to 3.2
Steve French [Fri, 7 Oct 2011 04:14:07 +0000 (23:14 -0500)]
[CIFS] Fix first time message on mount, ntlmv2 upgrade delayed to 3.2

Microsoft has a bug with ntlmv2 that requires use of ntlmssp, but
we didn't get the required information on when/how to use ntlmssp to
old (but once very popular) legacy servers (various NT4 fixpacks
for example) until too late to merge for 3.1.  Will upgrade
to NTLMv2 in NTLMSSP in 3.2

Signed-off-by: Steve French <>
Reviewed-by: Jeff Layton <>
11 years agosparc32,leon: SRMMU MMU Table probe fix
Daniel Hellstrom [Thu, 8 Sep 2011 03:11:15 +0000 (03:11 +0000)]
sparc32,leon: SRMMU MMU Table probe fix

The LEON MMU Model (SRMMU) does not implement MMu Table probing
in hardware, instead it is implemented in software. However the
software implementation does not return the PTE as it should which
always results in INVALID entires and the PROM mappings are not
inherited as they should during startup. The following patch
removes the masking of the PTE.

Signed-off-by: Daniel Hellstrom <>
Signed-off-by: David S. Miller <>
11 years agoARM: mach-ux500: enable fix for ARM errata 754322
srinidhi kasagar [Tue, 20 Sep 2011 05:45:46 +0000 (11:15 +0530)]
ARM: mach-ux500: enable fix for ARM errata 754322

This applies ARM errata fix 754322 for all ux500 platforms.

Signed-off-by: srinidhi kasagar <>
Signed-off-by: Linus Walleij <>
11 years agoMerge git://
Linus Torvalds [Thu, 6 Oct 2011 23:15:10 +0000 (16:15 -0700)]
Merge git://

* git://
  net: fix typos in Documentation/networking/scaling.txt
  bridge: leave carrier on for empty bridge
  netfilter: Use proper rwlock init function
  tcp: properly update lost_cnt_hint during shifting
  tcp: properly handle md5sig_pool references
  macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode

11 years agox86/PCI: use host bridge _CRS info on ASUS M2V-MX SE
Paul Menzel [Wed, 31 Aug 2011 15:07:10 +0000 (17:07 +0200)]
x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE

In summary, this DMI quirk uses the _CRS info by default for the ASUS
M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk
added by commit 2491762cfb47 ("x86/PCI: use host bridge _CRS info on
ASRock ALiveSATA2-GLAN") whose commit message should be read for further

Since commit 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci
read out res") Linux gives the following oops:

    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:20:01.0: setting latency timer to 64
    BUG: unable to handle kernel paging request at ffffc90011c08000
    IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
    PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173
    Oops: 0009 [#1] SMP
    last sysfs file: /sys/module/snd_pcm/initstate
    CPU 0
    Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan]
    Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name
    RIP: 0010:[<ffffffffa0578402>]  [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
    RSP: 0018:ffff88013153fe50  EFLAGS: 00010286
    RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006
    RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
    RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040
    R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400
    R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090
    FS:  0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0)
     0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400
     ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8
     ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232
    Call Trace:
     [<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186
     [<ffffffff811ad232>] ? local_pci_probe+0x49/0x92
     [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b
     [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b
     [<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b
     [<ffffffff8105fd3f>] ? kthread+0x7a/0x82
     [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10
     [<ffffffff8105fcc5>] ? kthread+0x0/0x82
     [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10
    Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be
    RIP  [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
     RSP <ffff88013153fe50>
    CR2: ffffc90011c08000
    ---[ end trace 8d1f3ebc136437fd ]---

Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem.

    $ dmesg | grep -i crs # with the quirk
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

The match has to be against the DMI board entries though since the vendor entries are not populated.

    DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304    10/30/2007

This quirk should be removed when `pci=use_crs` is enabled for machines
from 2006 or earlier or some other solution is implemented.

Using coreboot [1] with this board the problem does not exist but this
quirk also does not affect it either. To be safe though the check is
tightened to only take effect when the BIOS from American Megatrends is

        15:13 < ruik> but coreboot does not need that
        15:13 < ruik> because i have there only one root bus
        15:13 < ruik> the audio is behind a bridge

        $ sudo dmidecode
        BIOS Information
                Vendor: American Megatrends Inc.
                Version: 0304
                Release Date: 10/30/2007



Cc: (2.6.34)
Cc: Thomas Gleixner <>
Cc: Ingo Molnar <>
Cc: H. Peter Anvin <>
Signed-off-by: Paul Menzel <>
Signed-off-by: Bjorn Helgaas <>
Acked-by: Jesse Barnes <>
Signed-off-by: Linus Torvalds <>
11 years agonet: fix typos in Documentation/networking/scaling.txt
Benjamin Poirier [Tue, 4 Oct 2011 04:00:30 +0000 (04:00 +0000)]
net: fix typos in Documentation/networking/scaling.txt

The second hunk fixes rps_sock_flow_table but has to re-wrap the paragraph.

Signed-off-by: Benjamin Poirier <>
Signed-off-by: David S. Miller <>
11 years agobridge: leave carrier on for empty bridge
stephen hemminger [Mon, 3 Oct 2011 18:14:45 +0000 (18:14 +0000)]
bridge: leave carrier on for empty bridge

This resolves a regression seen by some users of bridging.
Some users use the bridge like a dummy device.
They expect to be able to put an IPv6 address on the device
with no ports attached. Although there are better ways of doing
this, there is no reason to not allow it.

Note: the bridge still will reflect the state of ports in the
bridge if there are any added.

Signed-off-by: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
11 years agoMerge branch 'for-linus' of
Linus Torvalds [Thu, 6 Oct 2011 15:31:47 +0000 (08:31 -0700)]
Merge branch 'for-linus' of

* 'for-linus' of
  dm crypt: always disable discard_zeroes_data
  dm: raid fix write_mostly arg validation
  dm table: avoid crash if integrity profile changes
  dm: flakey fix corrupt_bio_byte error path

11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Thu, 6 Oct 2011 15:30:03 +0000 (08:30 -0700)]
Merge branch 'for-linus' of git://

* 'for-linus' of git://
  md: Avoid waking up a thread after it has been freed.

11 years agodrm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1
Alex Deucher [Wed, 5 Oct 2011 22:36:50 +0000 (18:36 -0400)]
drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1

The encoders are supposedly fully routeable, but changing the mapping
doesn't always seem to take.  Using a hardcoded mapping is much more


Signed-off-by: Alex Deucher <>
Tested-by: Simon Farnsworth <>
Signed-off-by: Dave Airlie <>
11 years agonetfilter: Use proper rwlock init function
Thomas Gleixner [Wed, 5 Oct 2011 03:24:43 +0000 (03:24 +0000)]
netfilter: Use proper rwlock init function

Replace the open coded initialization with the init function.

Signed-off-by: Thomas Gleixner <>
Acked-by: Hans Schillstrom <>
Signed-off-by: David S. Miller <>
11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Wed, 5 Oct 2011 16:22:38 +0000 (09:22 -0700)]
Merge branch 'for-linus' of git://

* 'for-linus' of git://
  Input: wacom - revert "Cintiq 21UX2 does not have menu strips"

11 years agoMerge git://
Linus Torvalds [Wed, 5 Oct 2011 16:16:11 +0000 (09:16 -0700)]
Merge git://

* git://
  [SCSI] libsas: fix panic when single phy is disabled on a wide port
  [SCSI] qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload

11 years agodrm/radeon/kms: fix dp_detect handling for DP bridge chips
Alex Deucher [Tue, 4 Oct 2011 16:23:24 +0000 (12:23 -0400)]
drm/radeon/kms: fix dp_detect handling for DP bridge chips

The HPD pin is not reliable for detecting whether a monitor
is connected or not.  Skip HPD and just use DDC or load

Fixes phantom VGA connected bugs.

[Michel: fixes phantom VGA bugs on his llano system.]

Signed-off-by: Alex Deucher <>
Reviewed-by: Michel Dänzer <>
Tested-by: Michel Dänzer <>
Signed-off-by: Dave Airlie <>
11 years agodrm/radeon/kms: retry aux transactions if there are status flags
Alex Deucher [Tue, 4 Oct 2011 21:23:15 +0000 (17:23 -0400)]
drm/radeon/kms: retry aux transactions if there are status flags

If there are error flags in the aux status, retry the transaction.
This makes aux much more reliable, especially on llano systems.

Signed-off-by: Alex Deucher <>
Reviewed-by: Michel Dänzer <>
Signed-off-by: Dave Airlie <>
11 years agoInput: wacom - revert "Cintiq 21UX2 does not have menu strips"
Jason Gerecke [Wed, 5 Oct 2011 05:50:45 +0000 (22:50 -0700)]
Input: wacom - revert "Cintiq 21UX2 does not have menu strips"

This reverts commit 71c86ce59791bcd67af937bbea719a508079d7c2.
The 21UX2 does have touchstrips, but they are in a somewhat-
hidden location.

Signed-off-by: Jason Gerecke <>
Acked-by: Ping Cheng <>
Signed-off-by: Dmitry Torokhov <>
11 years agotcp: properly update lost_cnt_hint during shifting
Yan, Zheng [Sun, 2 Oct 2011 04:21:50 +0000 (04:21 +0000)]
tcp: properly update lost_cnt_hint during shifting

lost_skb_hint is used by tcp_mark_head_lost() to mark the first unhandled skb.
lost_cnt_hint is the number of packets or sacked packets before the lost_skb_hint;
When shifting a skb that is before the lost_skb_hint, if tcp_is_fack() is ture,
the skb has already been counted in the lost_cnt_hint; if tcp_is_fack() is false,
tcp_sacktag_one() will increase the lost_cnt_hint. So tcp_shifted_skb() does not
need to adjust the lost_cnt_hint by itself. When shifting a skb that is equal to
lost_skb_hint, the shifted packets will not be counted by tcp_mark_head_lost().
So tcp_shifted_skb() should adjust the lost_cnt_hint even tcp_is_fack(tp) is true.

Signed-off-by: Zheng Yan <>
Signed-off-by: David S. Miller <>
11 years agotcp: properly handle md5sig_pool references
Yan, Zheng [Thu, 29 Sep 2011 17:10:10 +0000 (17:10 +0000)]
tcp: properly handle md5sig_pool references

tcp_v4_clear_md5_list() assumes that multiple tcp md5sig peers
only hold one reference to md5sig_pool. but tcp_v4_md5_do_add()
increases use count of md5sig_pool for each peer. This patch
makes tcp_v4_md5_do_add() only increases use count for the first
tcp md5sig peer.

Signed-off-by: Zheng Yan <>
Signed-off-by: David S. Miller <>