11 years agoUSB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urb
Tomoki Sekiyama [Thu, 29 Mar 2012 23:51:36 +0000 (08:51 +0900)]
USB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urb

commit 532f17b5d59bf0deb6f1ff9bc1fb27d5b5011c09 upstream.

Current probing code is setting URB_NO_TRANSFER_DMA_MAP flag into a wrong urb
structure, and this causes BUG_ON with some USB host implementations.
This patch fixes the issue.

Signed-off-by: Tomoki Sekiyama <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
11 years agoUSB: yurex: Remove allocation of coherent buffer for setup-packet buffer
Tomoki Sekiyama [Thu, 29 Mar 2012 23:51:28 +0000 (08:51 +0900)]
USB: yurex: Remove allocation of coherent buffer for setup-packet buffer

commit 523fc5c14f6cad283e5a266eba0e343aed6e73d5 upstream.

Removes allocation of coherent buffer for the control-request setup-packet
buffer from the yurex driver. Using coherent buffers for setup-packet is
obsolete and does not work with some USB host implementations.

Signed-off-by: Tomoki Sekiyama <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
11 years agoxen/xenbus: Add quirk to deal with misconfigured backends.
Konrad Rzeszutek Wilk [Wed, 18 Apr 2012 02:21:38 +0000 (22:21 -0400)]
xen/xenbus: Add quirk to deal with misconfigured backends.

commit 3066616ce23aad5719c23a0f21f32676402cb44b upstream.

A rather annoying and common case is when booting a PVonHVM guest
and exposing the PV KBD and PV VFB - as broken toolstacks don't
always initialize the backends correctly.

Normally The HVM guest is using the VGA driver and the emulated
keyboard for this (though upstream version of QEMU implements
PV KBD, but still uses a VGA driver). We provide a very basic
two-stage wait mechanism - where we wait for 30 seconds for all
devices, and then for 270 for all them except the two mentioned.

That allows us to wait for the essential devices, like network
or disk for the full 6 minutes.

To trigger this, put this in your guest config:

vfb = [ 'vnc=1, vnclisten= ,vncunused=1']

instead of this:

Acked-by: Stefano Stabellini <>
[v3: Split delay in non-essential (30 seconds) and essential
 devices per Ian and Stefano suggestion]
[v4: Added comments per Stefano suggestion]
Signed-off-by: Konrad Rzeszutek Wilk <>
Signed-off-by: Ben Hutchings <>
11 years agoxen/gntdev: do not set VM_PFNMAP
Stefano Stabellini [Tue, 3 Apr 2012 17:05:47 +0000 (18:05 +0100)]
xen/gntdev: do not set VM_PFNMAP

commit e8e937be971d706061dc56220ff3605ab77622a7 upstream.

Since we are using the m2p_override we do have struct pages
corresponding to the user vma mmap'ed by gntdev.

Removing the VM_PFNMAP flag makes get_user_pages work on that vma.
An example test case would be using a Xen userspace block backend
(QDISK) on a file on NFS using O_DIRECT.

Signed-off-by: Stefano Stabellini <>
Signed-off-by: Konrad Rzeszutek Wilk <>
Signed-off-by: Ben Hutchings <>
11 years agommc: unbreak sdhci-esdhc-imx on i.MX25
Eric Bénard [Wed, 18 Apr 2012 00:30:20 +0000 (02:30 +0200)]
mmc: unbreak sdhci-esdhc-imx on i.MX25

commit b89152824f993a9572b47eb31f4579feadeac34c upstream.

This was broken by me in 37865fe91582582a6f6c00652f6a2b1ff71f8a78
("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more
extensive tests would have shown that read or write of data to the
card were failing (even if the partition table was correctly read).

Signed-off-by: Eric Bénard <>
Acked-by: Wolfram Sang <>
Signed-off-by: Chris Ball <>
Signed-off-by: Ben Hutchings <>
11 years agommc: fixes for eMMC v4.5 sanitize operation
Adrian Hunter [Thu, 5 Apr 2012 11:45:48 +0000 (14:45 +0300)]
mmc: fixes for eMMC v4.5 sanitize operation

commit 283028122db37621b124f079ca8eae5b64807ad4 upstream.

eMMC v4.5 sanitize operation erases all copies of unmapped
data.  However trim or erase operations must be used first
to unmap the required sectors.  That was not being done.

Fixes apply to linux 3.2 on.

Signed-off-by: Adrian Hunter <>
Acked-by: Jaehoon Chung <>
Acked-by: Linus Walleij <>
Signed-off-by: Chris Ball <>
Signed-off-by: Ben Hutchings <>
11 years agommc: fixes for eMMC v4.5 discard operation
Adrian Hunter [Thu, 5 Apr 2012 11:45:47 +0000 (14:45 +0300)]
mmc: fixes for eMMC v4.5 discard operation

commit 7194efb8f063ee3aa0cb50d9002348887e68ec10 upstream.

eMMC v4.5 discard operation is significantly different from the
existing trim operation because it is not guaranteed to work with
the new sanitize operation.  Consequently mmc_can_trim() is
separated from mmc_can_discard().

Also the new discard operation does not result in the sectors being
set to all-zeros, so discard_zeroes_data must not be set.

In addition, the new discard has the same timeout as trim, but from
v4.5 trim is defined to use the hc timeout.  The timeout calculation
is adjusted accordingly.

Fixes apply to linux 3.2 on.

Signed-off-by: Adrian Hunter <>
Acked-by: Jaehoon Chung <>
Acked-by: Linus Walleij <>
Signed-off-by: Chris Ball <>
Signed-off-by: Ben Hutchings <>
11 years agoARM: OMAP1: DMTIMER: fix broken timer clock source selection
Paul Walmsley [Wed, 11 Apr 2012 00:36:02 +0000 (18:36 -0600)]
ARM: OMAP1: DMTIMER: fix broken timer clock source selection

commit 6aaec67da1e41a0752a2b903b989e73b9f02e182 upstream.

DMTIMER source selection on OMAP1 is broken.  omap1_dm_timer_set_src()
tries to use __raw_{read,write}l() to read from and write to physical
addresses, but those functions take virtual addresses.

sparse caught this:

arch/arm/mach-omap1/timer.c:50:13: warning: incorrect type in argument 1 (different base types)
arch/arm/mach-omap1/timer.c:50:13:    expected void const volatile [noderef] <asn:2>*<noident>
arch/arm/mach-omap1/timer.c:50:13:    got unsigned int
arch/arm/mach-omap1/timer.c:52:9: warning: incorrect type in argument 1 (different base types)
arch/arm/mach-omap1/timer.c:52:9:    expected void const volatile [noderef] <asn:2>*<noident>
arch/arm/mach-omap1/timer.c:52:9:    got unsigned int

Fix by using omap_{read,writel}(), just like the other users of the
MOD_CONF_CTRL_1 register in the OMAP1 codebase.  Of course, in the long term,
removing omap_{read,write}l() is the appropriate thing to do; but
this will take some work to do this cleanly.

Looks like this was caused by 97933d6 (ARM: OMAP1: dmtimer: conversion
to platform devices) that dangerously moved code and changed it in
the same patch.

Signed-off-by: Paul Walmsley <>
Cc: Tarun Kanti DebBarma <>
[ updated comments to include the breaking commit]
Signed-off-by: Tony Lindgren <>
Signed-off-by: Ben Hutchings <>
11 years agoARM: clps711x: serial driver hungs are a result of call disable_irq within ISR
Alexander Shiyan [Tue, 27 Mar 2012 08:22:49 +0000 (12:22 +0400)]
ARM: clps711x: serial driver hungs are a result of call disable_irq within ISR

commit 7a6fbc9a887193a1e9f8658703881c528040afbc upstream.

Since 2.6.30-rc1 clps711x serial driver hungs system. This is a result
of call disable_irq from ISR. synchronize_irq waits for end of interrupt
and goes to infinite loop. This patch fix this problem.

Signed-off-by: Alexander Shiyan <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
11 years agoALSA: hda/conexant - Set up the missing docking-station pins
Takashi Iwai [Thu, 19 Apr 2012 13:18:08 +0000 (15:18 +0200)]
ALSA: hda/conexant - Set up the missing docking-station pins

commit d70f363222ef373c2037412f09a600357cfa1c7a upstream.

ThinkPad 410,420,510,520 and X201 with cx50585 & co chips have the
docking-station ports, but BIOS doesn't initialize for these pins.
Thus, like the former X200, we need to set up the pins manually in the

The odd part is that the same PCI SSID is used for X200 and T400, thus
we need to prepare individual fixup tables for cx5051 and others.

Bugzilla entries:

Reported-by: Josh Boyer <>
Reported-by: Jens Taprogge <>
Tested-by: Jens Taprogge <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
11 years agoALSA: hda/conexant - Don't set HP pin-control bit unconditionally
Takashi Iwai [Thu, 19 Apr 2012 13:15:25 +0000 (15:15 +0200)]
ALSA: hda/conexant - Don't set HP pin-control bit unconditionally

commit ca3649de026ff95c6f2847e8d096cf2f411c02b3 upstream.

Some output pins on Conexant chips have no HP control bit, but the
auto-parser initializes these pins unconditionally with PIN_HP.

Check the pin-capability and avoid the HP bit if not supported.

Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
11 years agocrypto: sha512 - Fix byte counter overflow in SHA-512
Kent Yoder [Thu, 5 Apr 2012 12:34:20 +0000 (20:34 +0800)]
crypto: sha512 - Fix byte counter overflow in SHA-512

commit 25c3d30c918207556ae1d6e663150ebdf902186b upstream.

The current code only increments the upper 64 bits of the SHA-512 byte
counter when the number of bytes hashed happens to hit 2^64 exactly.

This patch increments the upper 64 bits whenever the lower 64 bits

Signed-off-by: Kent Yoder <>
Signed-off-by: Herbert Xu <>
Signed-off-by: Ben Hutchings <>
11 years agoPerf: fix build breakage
Zeev Tarantov [Mon, 23 Apr 2012 06:37:04 +0000 (09:37 +0300)]
Perf: fix build breakage

[Patch not needed upstream as this is a backport build bugfix - gregkh

gcc correctly complains:

util/hist.c: In function ‘__hists__add_entry’:
util/hist.c:240:27: error: invalid type argument of ‘->’ (have ‘struct hist_entry’)
util/hist.c:241:23: error: invalid type argument of ‘->’ (have ‘struct hist_entry’)

for this new code:

+                       if (he-> != entry-> {
+                               he-> = entry->;
+                               if (he->
+                                       he->>referenced = true;
+                       }

because "entry" is a "struct hist_entry", not a pointer to a struct.

In mainline, "entry" is a pointer to struct passed as argument to the function.
So this is broken during backporting. But obviously not compile tested.

Signed-off-by: Zeev Tarantov <>
Cc: Signed-off-by: David S. Miller <>
Cc: Arnaldo Carvalho de Melo <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
11 years agoLinux 3.2.16 v3.2.16
Greg Kroah-Hartman [Sun, 22 Apr 2012 22:31:32 +0000 (15:31 -0700)]
Linux 3.2.16

11 years agodrm/radeon: fix load detect on rn50 with hardcoded EDIDs.
Dave Airlie [Thu, 19 Apr 2012 14:42:58 +0000 (15:42 +0100)]
drm/radeon: fix load detect on rn50 with hardcoded EDIDs.

commit a09d431f344d854e4fe9cfac44f78cb8202f3eb7 upstream.

When the force changes went in back in 3.3.0, we ended up returning
disconnected in the !force case, and the connected in when forced,
as it hit the hardcoded check.

Fix it so all exits go via the hardcoded check and stop spurious
modesets on platforms with hardcoded EDIDs.

Reported-by: Evan McNabb (Red Hat)
Reviewed-by: Alex Deucher <>
Signed-off-by: Dave Airlie <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrm/radeon: disable MSI on RV515
Dave Airlie [Fri, 13 Apr 2012 10:14:50 +0000 (11:14 +0100)]
drm/radeon: disable MSI on RV515

commit 16a5e32b83fd946312b9b13590c75d20c95c5202 upstream.

My rv515 card is very flaky with msi enabled. Every so often it loses a rearm
and never comes back, manually banging the rearm brings it back.

Reviewed-by: Alex Deucher <>
Signed-off-by: Dave Airlie <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrm/radeon/kms: fix the regression of DVI connector check
Takashi Iwai [Wed, 18 Apr 2012 13:21:07 +0000 (15:21 +0200)]
drm/radeon/kms: fix the regression of DVI connector check

commit e36325071832f1ba96ac54fb8ba1459f08b05dd8 upstream.

The check of the encoder type in the commit [e00e8b5e: drm/radeon/kms:
fix analog load detection on DVI-I connectors] is obviously wrong, and
it's the culprit of the regression on my workstation with DVI-analog
connection resulting in the blank output.

Fixed the typo now.

Signed-off-by: Takashi Iwai <>
Reviewed-by: Alex Deucher <>
Signed-off-by: Dave Airlie <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agofutex: Do not leak robust list to unprivileged process
Kees Cook [Mon, 19 Mar 2012 23:12:53 +0000 (16:12 -0700)]
futex: Do not leak robust list to unprivileged process

commit bdbb776f882f5ad431aa1e694c69c1c3d6a4a5b8 upstream.

It was possible to extract the robust list head address from a setuid
process if it had used set_robust_list(), allowing an ASLR info leak. This
changes the permission checks to be the same as those used for similar
info that comes out of /proc.

Running a setuid program that uses robust futexes would have had:
  cred->euid != pcred->euid
  cred->euid == pcred->uid
so the old permissions check would allow it. I'm not aware of any setuid
programs that use robust futexes, so this is just a preventative measure.

(This patch is based on changes from grsecurity.)

Signed-off-by: Kees Cook <>
Cc: Darren Hart <>
Cc: Peter Zijlstra <>
Cc: Jiri Kosina <>
Cc: Eric W. Biederman <>
Cc: David Howells <>
Cc: Serge E. Hallyn <>
Signed-off-by: Thomas Gleixner <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoBluetooth: Add support for BCM20702A0 [0a5c:21e3]
Jesse Sung [Thu, 22 Dec 2011 02:48:47 +0000 (10:48 +0800)]
Bluetooth: Add support for BCM20702A0 [0a5c:21e3]

commit c0190925dacd976a67044f4382d4effbed568dce upstream.

Add another vendor specific ID for BCM20702A0.

output of usb-devices:
T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e3 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=9439E5CBF66C
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Wen-chien Jesse Sung <>
Acked-by: Marcel Holtmann <>
Signed-off-by: Gustavo F. Padovan <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoBluetooth: Add Atheros maryann PIDVID support
Cho, Yu-Chen [Wed, 14 Mar 2012 20:01:21 +0000 (22:01 +0200)]
Bluetooth: Add Atheros maryann PIDVID support

commit 07c0ea874d43c299d185948452945a361052b6e3 upstream.

Add Atheros maryann 0cf3:311d PIDVID support
This module is AR3012 Series.

Include /sys/kernel/debug/usb/devices output here for reference

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=311d Rev= 0.01
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=311d Rev= 0.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Cho, Yu-Chen <>
cked-by: Marcel Holtmann <>
Signed-off-by: Johan Hedberg <>
Cc: Jonathan Nieder <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoBluetooth: Adding USB device 13d3:3375 as an Atheros AR3012.
Eran [Mon, 5 Dec 2011 22:15:29 +0000 (22:15 +0000)]
Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012.

commit 9498ba7a1d38d42eef4ef6d906ab1743c9f0fd6f upstream.

The bluetooth module in the Asus UX31/UX21 is based on Atheros AR3012
and requires a firmware to be uploaded before it's usable.

output of usb-devices for this module:
T:  Bus=01 Lev=02 Prnt=02 Port=07 Cnt=03 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3375 Rev=00.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: Eran <>
Tested-by: Michal Labedzki <>
Signed-off-by: Gustavo F. Padovan <>
Cc: Jonathan Nieder <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agospi-topcliff-pch: Support new device LAPIS Semiconductor ML7831 IOH
Tomoya MORINAGA [Fri, 28 Oct 2011 00:35:21 +0000 (09:35 +0900)]
spi-topcliff-pch: Support new device LAPIS Semiconductor ML7831 IOH

commit 92b3a5c1bc3c7da1ae4675d014124f4a97ddb632 upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Grant Likely <>
Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agospi-topcliff-pch: fix -Wuninitialized warning
Danny Kukawka [Tue, 14 Feb 2012 14:35:03 +0000 (15:35 +0100)]
spi-topcliff-pch: fix -Wuninitialized warning

commit de3bd7e6de25141c466773c2e0fa319b2fa93655 upstream.

Fix for:
drivers/spi/spi-topcliff-pch.c: In function ‘pch_spi_handler_sub’:
drivers/spi/spi-topcliff-pch.c:325:17: warning: ‘bpw_len’ may be
  used uninitialized in this function [-Wuninitialized]
drivers/spi/spi-topcliff-pch.c:325:42: warning: ‘rx_index’ may be
  used uninitialized in this function [-Wuninitialized]
drivers/spi/spi-topcliff-pch.c:325:42: warning: ‘tx_index’ may be
  used uninitialized in this function [-Wuninitialized]

Move usage of tx_index, rx_index and bpw_len into the same
block as where they are set to prevent uninitialized usage.

v2: instead of init variables with 0 move the whole block

[This patch title "warnings" makes you think "This patch is not
for bug fix".  However, this patch surely patch for bug fix.]

Signed-off-by: Danny Kukawka <>
Signed-off-by: Grant Likely <>
Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agopch_dma: Support new device LAPIS Semiconductor ML7831 IOH
Tomoya MORINAGA [Thu, 17 Nov 2011 07:14:23 +0000 (16:14 +0900)]
pch_dma: Support new device LAPIS Semiconductor ML7831 IOH

commit ca7fe2db892dcf91b2c72ee352eda4ff867903a7 upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Vinod Koul <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agopch_gbe: memory corruption calling pch_gbe_validate_option()
Dan Carpenter [Wed, 29 Feb 2012 21:17:08 +0000 (21:17 +0000)]
pch_gbe: memory corruption calling pch_gbe_validate_option()

commit 73f98eab9b9e0bab492ca06add5657d9e702ddb1 upstream.

pch_gbe_validate_option() modifies 32 bits of memory but we pass
&hw->phy.autoneg_advertised which only has 16 bits and &hw->mac.fc
which only has 8 bits.

Signed-off-by: Dan Carpenter <>
Signed-off-by: David S. Miller <>
Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agopch_gbe: Do not abort probe on bad MAC
Darren Hart [Mon, 16 Jan 2012 09:50:19 +0000 (09:50 +0000)]
pch_gbe: Do not abort probe on bad MAC

commit 2b53d07891630dead46d65c8f896955fd3ae0302 upstream.

If the MAC is invalid or not implemented, do not abort the probe. Issue
a warning and prevent bringing the interface up until a MAC is set manually
(via ifconfig $IFACE hw ether $MAC).

Tested on two platforms, one with a valid MAC, the other without a MAC. The real
MAC is used if present, the interface fails to come up until the MAC is set on
the other. They successfully get an IP over DHCP and pass a simple ping and
login over ssh test.

This is meant to allow the Inforce SYS940X development board:
(and others suffering from a missing MAC) to work with the mainline kernel.
Without this patch, the probe will fail and the interface will not be created,
preventing the user from configuring the MAC manually.

This does not make any attempt to address a missing or invalid MAC for the
pch_phub driver.

Signed-off-by: Darren Hart <>
CC: Arjan van de Ven <>
CC: Alan Cox <>
CC: Tomoya MORINAGA <>
CC: Jeff Kirsher <>
CC: "David S. Miller" <>
CC: Paul Gortmaker <>
CC: Jon Mason <>
CC: Mark Brown <>
CC: David Laight <David.Laight@ACULAB.COM>
CC: Joe Perches <>
Signed-off-by: David S. Miller <>
Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agosecurity: fix compile error in commoncap.c
Jonghwan Choi [Wed, 18 Apr 2012 21:23:04 +0000 (17:23 -0400)]
security: fix compile error in commoncap.c

commit 51b79bee627d526199b2f6a6bef8ee0c0739b6d1 upstream.

Add missing "personality.h"
security/commoncap.c: In function 'cap_bprm_set_creds':
security/commoncap.c:510: error: 'PER_CLEAR_ON_SETID' undeclared (first use in this function)
security/commoncap.c:510: error: (Each undeclared identifier is reported only once
security/commoncap.c:510: error: for each function it appears in.)

Signed-off-by: Jonghwan Choi <>
Acked-by: Serge Hallyn <>
Signed-off-by: James Morris <>
Cc: Eric Paris <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoACPICA: Fix to allow region arguments to reference other scopes
Lin Ming [Mon, 28 Nov 2011 01:46:02 +0000 (09:46 +0800)]
ACPICA: Fix to allow region arguments to reference other scopes

commit 8931d9ea78848b073bf299594f148b83abde4a5e upstream.

Allow referenced objects to be in a different scope.

ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349)

    Scope (_SB)
        Name (RAMB, 0xDF5A1018)
        OperationRegion (\RAMW, SystemMemory, RAMB, 0x00010000)

For above ASL code, we need to save scope node(\_SB) to lookup
the argument node(\_SB.RAMB).

Reported-by: Jim Green <>
Signed-off-by: Lin Ming <>
Signed-off-by: Bob Moore <>
Signed-off-by: Len Brown <>
Cc: Herton Ronaldo Krzesinski <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agousb: gadget: pch_udc: Reduce redundant interrupt
Tomoya MORINAGA [Thu, 12 Jan 2012 02:27:09 +0000 (11:27 +0900)]
usb: gadget: pch_udc: Reduce redundant interrupt

commit 833310402c54ad9b676b465fc53ad276b13d36be upstream.

USB Suspend interrupts occur frequently.

When it is called pch_udc_reconnect() in USB Suspend, it repeats reset and

pch_udc_reconnect() does not enable all interrupts.  When an enumeration event
occurred the driver enables all interrupts.

Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Felipe Balbi <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agousb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget connect/disconnect...
Tomoya MORINAGA [Thu, 12 Jan 2012 02:27:08 +0000 (11:27 +0900)]
usb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget connect/disconnect issue

commit 1c575d2d2e3ff2a7cb3c2e2165064199cfd8ad32 upstream.

After a USB cable is connect/disconnected, the system rarely freezes.

Since the USB device controller cannot know to disconnect the USB cable, when
it is used without detecting VBUS by GPIO, the UDC driver does not notify to
USB Gadget.

Since USB Gadget cannot know to disconnect, a false setting occurred when the
USB cable is connected/disconnect repeatedly.

Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Felipe Balbi <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agousb: gadget: pch_udc: Fix USB suspend issue
Tomoya MORINAGA [Thu, 12 Jan 2012 02:27:07 +0000 (11:27 +0900)]
usb: gadget: pch_udc: Fix USB suspend issue

commit 84566abba058b2aae8d603dfa90b5a3778a6714f upstream.

After USB Suspend, a system rarely freezes.

When USB Suspend occurred, the driver is not notifying
a gadget of the event.

Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Felipe Balbi <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agousb: gadget: pch_udc: Fix wrong return value
Tomoya MORINAGA [Thu, 12 Jan 2012 02:27:06 +0000 (11:27 +0900)]
usb: gadget: pch_udc: Fix wrong return value

commit c802672cd36cd063bfd54d54c8c34825ab5b2357 upstream.

If the return value of pch_udc_pcd_init() is False, the return value of
this function is unsettled.
Since pch_udc_pcd_init() always returns 0, there is not actually the issue.

If pch_udc_pcd_init() is True, the variable, retval, is not set for an
appropriate value.

Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Felipe Balbi <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agousb: gadget: pch_udc: Fix disconnect issue
Tomoya MORINAGA [Thu, 12 Jan 2012 02:27:05 +0000 (11:27 +0900)]
usb: gadget: pch_udc: Fix disconnect issue

commit c50a3bff0edb0acd49d8033a12ea4668e09a31ad upstream.

When the driver notifies a gadget of a disconnect event, a system
rarely freezes.

When the driver calls dev->driver->disconnect(), it is not calling

Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Felipe Balbi <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agogpio: Add missing spin_lock_init in gpio-pch driver
Axel Lin [Wed, 1 Feb 2012 02:51:53 +0000 (10:51 +0800)]
gpio: Add missing spin_lock_init in gpio-pch driver

commit d166370ad86b33b1111af3a0cdd7de94e03789a6 upstream.

This bug was introduced by commit d568a681
"gpio-pch: add spinlock in suspend/resume processing"
which adds a spinlock to struct pch_gpio but never init the spinlock.

Reported-by: Tomoya MORINAGA <>
Signed-off-by: Axel Lin <>
Acked-by: Linus Walleij <>
Signed-off-by: Grant Likely <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agopch_gpio: Support new device LAPIS Semiconductor ML7831 IOH
Tomoya MORINAGA [Fri, 28 Oct 2011 00:23:32 +0000 (09:23 +0900)]
pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH

commit 868fea0507308b6548bba7debe5f5c2d5ca47fca upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Grant Likely <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoBluetooth: hci_core: fix NULL-pointer dereference at unregister
Johan Hovold [Thu, 15 Mar 2012 13:48:41 +0000 (14:48 +0100)]
Bluetooth: hci_core: fix NULL-pointer dereference at unregister

commit 94324962066231a938564bebad0f941cd2d06bb2 upstream.

Make sure hci_dev_open returns immediately if hci_dev_unregister has
been called.

This fixes a race between hci_dev_open and hci_dev_unregister which can
lead to a NULL-pointer dereference.

Bug is 100% reproducible using hciattach and a disconnected serial port:

0. # hciattach -n /dev/ttyO1 any noflow

1. hci_dev_open called from hci_power_on grabs req lock
2. hci_init_req executes but device fails to initialise (times out
3. hci_dev_open is called from hci_sock_ioctl and sleeps on req lock
4. hci_uart_tty_close calls hci_dev_unregister and sleeps on req lock in
5. hci_dev_open (1) releases req lock
6. hci_dev_do_close grabs req lock and returns as device is not up
7. hci_dev_unregister sleeps in destroy_workqueue
8. hci_dev_open (3) grabs req lock, calls hci_init_req and eventually sleeps
9. hci_dev_unregister finishes, while hci_dev_open is still running...

[   79.627136] INFO: trying to register non-static key.
[   79.632354] the code is fine but needs lockdep annotation.
[   79.638122] turning off the locking correctness validator.
[   79.643920] [<c00188bc>] (unwind_backtrace+0x0/0xf8) from [<c00729c4>] (__lock_acquire+0x1590/0x1ab0)
[   79.653594] [<c00729c4>] (__lock_acquire+0x1590/0x1ab0) from [<c00733f8>] (lock_acquire+0x9c/0x128)
[   79.663085] [<c00733f8>] (lock_acquire+0x9c/0x128) from [<c0040a88>] (run_timer_softirq+0x150/0x3ac)
[   79.672668] [<c0040a88>] (run_timer_softirq+0x150/0x3ac) from [<c003a3b8>] (__do_softirq+0xd4/0x22c)
[   79.682281] [<c003a3b8>] (__do_softirq+0xd4/0x22c) from [<c003a924>] (irq_exit+0x8c/0x94)
[   79.690856] [<c003a924>] (irq_exit+0x8c/0x94) from [<c0013a50>] (handle_IRQ+0x34/0x84)
[   79.699157] [<c0013a50>] (handle_IRQ+0x34/0x84) from [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c)
[   79.708648] [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) from [<c037499c>] (__irq_usr+0x3c/0x60)
[   79.718048] Exception stack(0xcf281fb0 to 0xcf281ff8)
[   79.723358] 1fa0:                                     0001e6a0 be8dab00 0001e698 00036698
[   79.731933] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000
[   79.740509] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff
[   79.747497] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   79.756011] pgd = cf3b4000
[   79.758850] [00000000] *pgd=8f0c7831, *pte=00000000, *ppte=00000000
[   79.765502] Internal error: Oops: 80000007 [#1]
[   79.770294] Modules linked in:
[   79.773529] CPU: 0    Tainted: G        W     (3.3.0-rc6-00002-gb5d5c87 #421)
[   79.781066] PC is at 0x0
[   79.783721] LR is at run_timer_softirq+0x16c/0x3ac
[   79.788787] pc : [<00000000>]    lr : [<c0040aa4>]    psr: 60000113
[   79.788787] sp : cf281ee0  ip : 00000000  fp : cf280000
[   79.800903] r10: 00000004  r9 : 00000100  r8 : b6f234d0
[   79.806427] r7 : c0519c28  r6 : cf093488  r5 : c0561a00  r4 : 00000000
[   79.813323] r3 : 00000000  r2 : c054eee0  r1 : 00000001  r0 : 00000000
[   79.820190] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   79.827728] Control: 10c5387d  Table: 8f3b4019  DAC: 00000015
[   79.833801] Process gpsd (pid: 1265, stack limit = 0xcf2802e8)
[   79.839965] Stack: (0xcf281ee0 to 0xcf282000)
[   79.844573] 1ee0: 00000002 00000000 c0040a24 00000000 00000002 cf281f08 00200200 00000000
[   79.853210] 1f00: 00000000 cf281f18 cf281f08 00000000 00000000 00000000 cf281f18 cf281f18
[   79.861816] 1f20: 00000000 00000001 c056184c 00000000 00000001 b6f234d0 c0561848 00000004
[   79.870452] 1f40: cf280000 c003a3b8 c051e79c 00000001 00000000 00000100 3fa9e7b8 0000000a
[   79.879089] 1f60: 00000025 cf280000 00000025 00000000 00000000 b6f234d0 00000000 00000004
[   79.887756] 1f80: 00000000 c003a924 c053ad38 c0013a50 fa200000 cf281fb0 ffffffff c0008530
[   79.896362] 1fa0: 0001e6a0 0000aab8 80000010 c037499c 0001e6a0 be8dab00 0001e698 00036698
[   79.904998] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000
[   79.913665] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff 00fbf700 04ffff00
[   79.922302] [<c0040aa4>] (run_timer_softirq+0x16c/0x3ac) from [<c003a3b8>] (__do_softirq+0xd4/0x22c)
[   79.931945] [<c003a3b8>] (__do_softirq+0xd4/0x22c) from [<c003a924>] (irq_exit+0x8c/0x94)
[   79.940582] [<c003a924>] (irq_exit+0x8c/0x94) from [<c0013a50>] (handle_IRQ+0x34/0x84)
[   79.948913] [<c0013a50>] (handle_IRQ+0x34/0x84) from [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c)
[   79.958404] [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) from [<c037499c>] (__irq_usr+0x3c/0x60)
[   79.967773] Exception stack(0xcf281fb0 to 0xcf281ff8)
[   79.973083] 1fa0:                                     0001e6a0 be8dab00 0001e698 00036698
[   79.981658] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000
[   79.990234] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff
[   79.997161] Code: bad PC value
[   80.000396] ---[ end trace 6f6739840475f9ee ]---
[   80.005279] Kernel panic - not syncing: Fatal exception in interrupt

Signed-off-by: Johan Hovold <>
Acked-by: Marcel Holtmann <>
Signed-off-by: Johan Hedberg <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoxhci: Fix register save/restore order.
Sarah Sharp [Fri, 16 Mar 2012 20:19:35 +0000 (13:19 -0700)]
xhci: Fix register save/restore order.

commit c7713e736526d8c9f6f87716fb90562a8ffaff2c upstream.

The xHCI 1.0 spec errata released on June 13, 2011, changes the ordering
that the xHCI registers are saved and restored in.  It moves the
interrupt pending (IMAN) and interrupt control (IMOD) registers to be
saved and restored last.  I believe that's because the host controller
may attempt to fetch the event ring table when interrupts are
re-enabled.  Therefore we need to restore the event ring registers
before we re-enable interrupts.

This should be backported to kernels as old as 2.6.37, that contain the
commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power
management implementation"

Signed-off-by: Sarah Sharp <>
Tested-by: Elric Fu <>
Cc: Andiry Xu <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoath9k: fix max noise floor threshold
Rajkumar Manoharan [Thu, 15 Mar 2012 00:38:04 +0000 (06:08 +0530)]
ath9k: fix max noise floor threshold

commit 2ee0a07028d2cde6e131b73f029dae2b93c50f3a upstream.

Currently the maximum noise floor limit is set as too high (-60dB). The
assumption of having a higher threshold limit is that it would help
de-sensitize the receiver (reduce phy errors) from continuous
interference. But when we have a bursty interference where there are
collisions and then free air time and if the receiver is desensitized too
much, it will miss the normal packets too. Lets make use of chips
specific min, nom and max limits always. This patch helps to improve the
connection stability in congested networks.

Cc: Paul Stewart <>
Tested-by: Gary Morain <>
Signed-off-by: Madhan Jaganathan <>
Signed-off-by: Rajkumar Manoharan <>
Signed-off-by: John W. Linville <>
[bwh: Backported to 3.0/3.2: adjust context]
Signed-off-by: Ben Hutchings <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agofcaps: clear the same personality flags as suid when fcaps are used
Eric Paris [Tue, 17 Apr 2012 20:26:54 +0000 (16:26 -0400)]
fcaps: clear the same personality flags as suid when fcaps are used

commit d52fc5dde171f030170a6cb78034d166b13c9445 upstream.

If a process increases permissions using fcaps all of the dangerous
personality flags which are cleared for suid apps should also be cleared.
Thus programs given priviledge with fcaps will continue to have address space
randomization enabled even if the parent tried to disable it to make it
easier to attack.

Signed-off-by: Eric Paris <>
Reviewed-by: Serge Hallyn <>
Signed-off-by: James Morris <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoserial: PL011: move interrupt clearing
Linus Walleij [Wed, 21 Mar 2012 19:15:18 +0000 (20:15 +0100)]
serial: PL011: move interrupt clearing

commit c3d8b76f61586714cdc5f219ba45592a54caaa55 upstream.

Commit 360f748b204275229f8398cb2f9f53955db1503b
"serial: PL011: clear pending interrupts"
attempts to clear interrupts by writing to a
yet-unassigned memory address. This fixes the issue.

The breaking patch is marked for stable so should be
carried along with the other patch.

Cc: Shreshtha Kumar Sahu <>
Cc: Russell King <>
Cc: Nicolas Pitre <>
Reported-by: Viresh Kumar <>
Signed-off-by: Linus Walleij <>
Tested-by: Grant Likely <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoserial: PL011: clear pending interrupts
Linus Walleij [Tue, 13 Mar 2012 12:27:23 +0000 (13:27 +0100)]
serial: PL011: clear pending interrupts

commit 9b96fbacda34079dea0638ee1e92c56286f6114a upstream.

Chanho Min reported that when the boot loader transfers
control to the kernel, there may be pending interrupts
causing the UART to lock up in an eternal loop trying to
pick tokens from the FIFO (since the RX interrupt flag
indicates there are tokens) while in practice there are
no tokens - in fact there is only a pending IRQ flag.

This patch address the issue with a combination of two
patches suggested by Russell King that clears and mask
all interrupts at probe() and clears any pending error
and RX interrupts at port startup time.

We suspect the spurious interrupts are a side-effect of
switching the UART from FIFO to non-FIFO mode.

Cc: Shreshtha Kumar Sahu <>
Reported-by: Chanho Min <>
Suggested-by: Russell King <>
Signed-off-by: Linus Walleij <>
Reviewed-by: Jong-Sung Kim <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agofix tlb flushing for page table pages
Martin Schwidefsky [Wed, 11 Apr 2012 12:28:07 +0000 (14:28 +0200)]
fix tlb flushing for page table pages

commit cd94154cc6a28dd9dc271042c1a59c08d26da886 upstream.

Git commit 36409f6353fc2d7b6516e631415f938eadd92ffa "use generic RCU
page-table freeing code" introduced a tlb flushing bug. Partially revert
the above git commit and go back to s390 specific page table flush code.

For s390 the TLB can contain three types of entries, "normal" TLB
page-table entries, TLB combined region-and-segment-table (CRST) entries
and real-space entries. Linux does not use real-space entries which
leaves normal TLB entries and CRST entries. The CRST entries are
intermediate steps in the page-table translation called translation paths.
For example a 4K page access in a three-level page table setup will
create two CRST TLB entries and one page-table TLB entry. The advantage
of that approach is that a page access next to the previous one can reuse
the CRST entries and needs just a single read from memory to create the
page-table TLB entry. The disadvantage is that the TLB flushing rules are
more complicated, before any page-table may be freed the TLB needs to be

In short: the generic RCU page-table freeing code is incorrect for the
CRST entries, in particular the check for mm_users < 2 is troublesome.

This is applicable to 3.0+ kernels.

Signed-off-by: Martin Schwidefsky <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoxHCI: Correct the #define XHCI_LEGACY_DISABLE_SMI
Alex He [Fri, 30 Mar 2012 02:21:38 +0000 (10:21 +0800)]
xHCI: Correct the #define XHCI_LEGACY_DISABLE_SMI

commit 95018a53f7653e791bba1f54c8d75d9cb700d1bd upstream.

Re-define XHCI_LEGACY_DISABLE_SMI and used it in right way. All SMI enable
bits will be cleared to zero and flag bits 29:31 are also cleared to zero.
Other bits should be presvered as Table 146.

This patch should be backported to kernels as old as 2.6.31.

Signed-off-by: Alex He <>
Signed-off-by: Sarah Sharp <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoxHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI host
Elric Fu [Thu, 29 Mar 2012 07:47:50 +0000 (15:47 +0800)]
xHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI host

commit 457a4f61f9bfc3ae76e5b49f30f25d86bb696f67 upstream.

The suspend operation of VIA xHCI host have some issues and
hibernate operation works fine, so The XHCI_RESET_ON_RESUME
quirk is added for it.

This patch should base on "xHCI: Don't write zeroed pointer
to xHC registers" that is released by Sarah. Otherwise, the
host system error will ocurr in the hibernate operation

This should be backported to stable kernels as old as 2.6.37,
that contain the commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9
"xhci: Add reset on resume quirk for asrock p67 host".

Signed-off-by: Elric Fu <>
Signed-off-by: Sarah Sharp <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: fix bug of device descriptor got from superspeed device
Elric Fu [Mon, 26 Mar 2012 13:16:02 +0000 (21:16 +0800)]
USB: fix bug of device descriptor got from superspeed device

commit d8aec3dbdfd02627e198e7956ab4aaeba2a349fa upstream.

When the Seagate Goflex USB3.0 device is attached to VIA xHCI
host, sometimes the device will downgrade mode to high speed.
By the USB analyzer, I found the device finished the link
training process and worked at superspeed mode. But the device
descriptor got from the device shows the device works at 2.1.
It is very strange and seems like the device controller of
Seagate Goflex has a little confusion.

The first 8 bytes of device descriptor should be:
12 01 00 03 00 00 00 09

But the first 8 bytes of wrong device descriptor are:
12 01 10 02 00 00 00 40

The wrong device descriptor caused the initialization of mass
storage failed. After a while, the device would be recognized
as a high speed device and works fine.

This patch will warm reset the device to fix the issue after
finding the bcdUSB field of device descriptor isn't 0x0300
but the speed mode of device is superspeed.

This patch should be backported to kernels as old as 3.2, or ones that
contain the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore:
refine warm reset logic".

Signed-off-by: Elric Fu <>
Acked-by: Andiry Xu <>
Acked-by: Sergei Shtylyov <>
Signed-off-by: Sarah Sharp <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoxhci: Restore event ring dequeue pointer on resume.
Sarah Sharp [Fri, 16 Mar 2012 20:27:39 +0000 (13:27 -0700)]
xhci: Restore event ring dequeue pointer on resume.

commit fb3d85bc7193f23c9a564502df95564c49a32c91 upstream.

The xhci_save_registers() function saved the event ring dequeue pointer
in the s3 register structure, but xhci_restore_registers() never
restored it.  No other code in the xHCI successful resume path would
ever restore it either.  Fix that.

This should be backported to kernels as old as 2.6.37, that contain the
commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power
management implementation".

Signed-off-by: Sarah Sharp <>
Tested-by: Elric Fu <>
Cc: Andiry Xu <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoxhci: Don't write zeroed pointers to xHC registers.
Sarah Sharp [Fri, 16 Mar 2012 20:09:39 +0000 (13:09 -0700)]
xhci: Don't write zeroed pointers to xHC registers.

commit 159e1fcc9a60fc7daba23ee8fcdb99799de3fe84 upstream.

When xhci_mem_cleanup() is called, we can't be sure if the xHC is
actually halted.  We can ask the xHC to halt by writing to the RUN bit
in the command register, but that might timeout due to a HW hang.

If the host controller is still running, we should not write zeroed
values to the event ring dequeue pointers or base tables, the DCBAA
pointers, or the command ring pointers.  Eric Fu reports his VIA VL800
host accesses the event ring pointers after a failed register restore on
resume from suspend.  The hypothesis is that the host never actually
halted before the register write to change the event ring pointer to

Remove all writes of zeroed values to pointer registers in
xhci_mem_cleanup().  Instead, make all callers of the function reset the
host controller first, which will reset those registers to zero.
xhci_mem_init() is the only caller that doesn't first halt and reset the
host controller before calling xhci_mem_cleanup().

This should be backported to kernels as old as 2.6.32.

Signed-off-by: Sarah Sharp <>
Tested-by: Elric Fu <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoxhci: don't re-enable IE constantly
Felipe Balbi [Thu, 15 Mar 2012 14:37:08 +0000 (16:37 +0200)]
xhci: don't re-enable IE constantly

commit 4e833c0b87a30798e67f06120cecebef6ee9644c upstream.

While we're at that, define IMAN bitfield to aid readability.

The interrupt enable bit should be set once on driver init, and we
shouldn't need to continually re-enable it.  Commit c21599a3 introduced
a read of the irq_pending register, and that allows us to preserve the
state of the IE bit.  Before that commit, we were blindly writing 0x3 to
the register.

This patch should be backported to kernels as old as 2.6.36, or ones
that contain the commit c21599a36165dbc78b380846b254017a548b9de5 "USB:
xhci: Reduce reads and writes of interrupter registers".

Signed-off-by: Felipe Balbi <>
Signed-off-by: Sarah Sharp <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: don't ignore suspend errors for root hubs
Alan Stern [Wed, 28 Mar 2012 19:56:17 +0000 (15:56 -0400)]
USB: don't ignore suspend errors for root hubs

commit cd4376e23a59a2adf3084cb5f4a523e6d5fd4e49 upstream.

This patch (as1532) fixes a mistake in the USB suspend code.  When the
system is going to sleep, we should ignore errors in powering down USB
devices, because they don't really matter.  The devices will go to low
power anyway when the entire USB bus gets suspended (except for
SuperSpeed devices; maybe they will need special treatment later).

However we should not ignore errors in suspending root hubs,
especially if the error indicates that the suspend raced with a wakeup
request.  Doing so might leave the bus powered on while the system was
supposed to be asleep, or it might cause the suspend of the root hub's
parent controller device to fail, or it might cause a wakeup request
to be ignored.

The patch fixes the problem by ignoring errors only when the device in
question is not a root hub.

Signed-off-by: Alan Stern <>
Reported-by: Chen Peter <>
Tested-by: Chen Peter <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: don't clear urb->dev in scatter-gather library
Alan Stern [Thu, 22 Mar 2012 15:00:21 +0000 (11:00 -0400)]
USB: don't clear urb->dev in scatter-gather library

commit bcf398537630bf20b4dbe59ba855b69f404c93cf upstream.

This patch (as1517b) fixes an error in the USB scatter-gather library.
The library code uses urb->dev to determine whether or nor an URB is
currently active; the completion handler sets urb->dev to NULL.
However the core unlinking routines need to use urb->dev.  Since
unlinking always racing with completion, the completion handler must
not clear urb->dev -- it can lead to invalid memory accesses when a
transfer has to be cancelled.

This patch fixes the problem by getting rid of the lines that clear
urb->dev after urb has been submitted.  As a result we may end up
trying to unlink an URB that failed in submission or that has already
completed, so an extra check is added after each unlink to avoid
printing an error message when this happens.  The checks are updated
in both sg_complete() and sg_cancel(), and the second is updated to
match the first (currently it prints out unnecessary warning messages
if a device is unplugged while a transfer is in progress).

Signed-off-by: Alan Stern <>
Reported-and-tested-by: Illia Zaitsev <>
CC: Ming Lei <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: sierra: add support for Sierra Wireless MC7710
Anton Samokhvalov [Wed, 4 Apr 2012 18:26:01 +0000 (22:26 +0400)]
USB: sierra: add support for Sierra Wireless MC7710

commit c5d703dcc776cb542b41665f2b7e2ba054efb4a7 upstream.

Just add new device id. 3G works fine, LTE not tested.

Signed-off-by: Anton Samokhvalov <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: ftdi_sio: fix race condition in TIOCMIWAIT, and abort of TIOCMIWAIT when the...
Simon Arlott [Mon, 26 Mar 2012 22:27:59 +0000 (23:27 +0100)]
USB: ftdi_sio: fix race condition in TIOCMIWAIT, and abort of TIOCMIWAIT when the device is removed

commit 876ae50d94b02f3f523aa451b45ec5fb9c25d221 upstream.

There are two issues here, one is that the device is generating
spurious very fast modem status line changes somewhere:

CTS becomes high then low 18µs later:
[121226.924373] ftdi_process_packet: prev rng=0 dsr=10 dcd=0 cts=6
[121226.924378] ftdi_process_packet: status=10 prev=00 diff=10
[121226.924382] ftdi_process_packet: now rng=0 dsr=10 dcd=0 cts=7
(wake_up_interruptible is called)
[121226.924391] ftdi_process_packet: prev rng=0 dsr=10 dcd=0 cts=7
[121226.924394] ftdi_process_packet: status=00 prev=10 diff=10
[121226.924397] ftdi_process_packet: now rng=0 dsr=10 dcd=0 cts=8
(wake_up_interruptible is called)

This wakes up the task in TIOCMIWAIT:
[121226.924405] ftdi_ioctl: 19451 rng=0->0 dsr=10->10 dcd=0->0 cts=6->8
(wait from 20:51:46 returns and observes both changes)

Which then calls TIOCMIWAIT again:
20:51:46.400239 ioctl(3, TIOCMIWAIT, 0x20) = 0
22:11:09.441818 ioctl(3, TIOCMGET, [TIOCM_DTR|TIOCM_RTS]) = 0
22:11:09.442812 ioctl(3, TIOCMIWAIT, 0x20) = -1 EIO (Input/output error)
(the second wake_up_interruptible takes effect and an I/O error occurs)

The other issue is that TIOCMIWAIT will wait forever (unless the task is
interrupted) if the device is removed.

This change removes the -EIO return that occurs if the counts don't
appear to have changed. Multiple counts may have been processed as
one or the waiting task may have started waiting after recording the
current count.

It adds a bool to indicate that the device has been removed so that
TIOCMIWAIT doesn't wait forever, and wakes up any tasks so that they can
return -EIO.

Signed-off-by: Simon Arlott <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: ftdi_sio: fix status line change handling for TIOCMIWAIT and TIOCGICOUNT
Simon Arlott [Mon, 26 Mar 2012 20:19:40 +0000 (21:19 +0100)]
USB: ftdi_sio: fix status line change handling for TIOCMIWAIT and TIOCGICOUNT

commit fca5430d48d53eaf103498c33fd0d1984b9f448b upstream.

Handling of TIOCMIWAIT was changed by commit 1d749f9afa657f6ee9336b2bc1fcd750a647d157
 USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers

FTDI_STATUS_B0_MASK does not indicate the changed modem status lines,
it indicates the value of the current modem status lines. An xor is
still required to determine which lines have changed.

The count was only being incremented if the line was high. The only
reason TIOCMIWAIT still worked was because the status packet is
repeated every 1ms, so the count was always changing. The wakeup
itself still ran based on the status lines changing.

This change fixes handling of updates to the modem status lines and
allows multiple processes to use TIOCMIWAIT concurrently.

Tested with two processes waiting on different status lines being
toggled independently.

Signed-off-by: Simon Arlott <>
Cc: Uwe Bonnes <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: option: re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array
Santiago Garcia Mantinan [Mon, 19 Mar 2012 17:17:00 +0000 (18:17 +0100)]
USB: option: re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array

commit 9ac2feb22b5b821d81463bef92698ef7682a3145 upstream.


Signed-off-by: Santiago Garcia Mantinan <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: pl2303: fix DTR/RTS being raised on baud rate change
Johan Hovold [Fri, 23 Mar 2012 14:23:18 +0000 (15:23 +0100)]
USB: pl2303: fix DTR/RTS being raised on baud rate change

commit ce5c9851855bab190c9a142761d54ba583ab094c upstream.

DTR/RTS should only be raised when changing baudrate from B0 and not on
any baud rate change (> B0).

Reported-by: Søren Holm <>
Signed-off-by: Johan Hovold <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: serial: fix race between probe and open
Johan Hovold [Tue, 20 Mar 2012 15:59:33 +0000 (16:59 +0100)]
USB: serial: fix race between probe and open

commit a65a6f14dc24a90bde3f5d0073ba2364476200bf upstream.

Fix race between probe and open by making sure that the disconnected
flag is not cleared until all ports have been registered.

A call to tty_open while probe is running may get a reference to the
serial structure in serial_install before its ports have been
registered. This may lead to usb_serial_core calling driver open before
port is fully initialised.

With ftdi_sio this result in the following NULL-pointer dereference as
the private data has not been initialised at open:

[  199.698286] IP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio]
[  199.698297] *pde = 00000000
[  199.698303] Oops: 0000 [#1] PREEMPT SMP
[  199.698313] Modules linked in: ftdi_sio usbserial
[  199.698323]
[  199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J
[  199.698339] EIP: 0060:[<f811a089>] EFLAGS: 00010286 CPU: 0
[  199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio]
[  199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600
[  199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc
[  199.698356]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000)
[  199.698364] Stack:
[  199.698368]  f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800
[  199.698387]  00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222
[  199.698479]  22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab
[  199.698496] Call Trace:
[  199.698504]  [<f806e68e>] ? serial_activate+0x2e/0x70 [usbserial]
[  199.698511]  [<f806e6ab>] serial_activate+0x4b/0x70 [usbserial]
[  199.698521]  [<c126380c>] tty_port_open+0x7c/0xd0
[  199.698527]  [<f806e660>] ? serial_set_termios+0xa0/0xa0 [usbserial]
[  199.698534]  [<f806e76f>] serial_open+0x2f/0x70 [usbserial]
[  199.698540]  [<c125d07c>] tty_open+0x20c/0x510
[  199.698546]  [<c10e9eb7>] chrdev_open+0xe7/0x230
[  199.698553]  [<c10e48f2>] __dentry_open+0x1f2/0x390
[  199.698559]  [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50
[  199.698565]  [<c10e4b76>] nameidata_to_filp+0x66/0x80
[  199.698570]  [<c10e9dd0>] ? cdev_put+0x20/0x20
[  199.698576]  [<c10f3e08>] do_last+0x198/0x730
[  199.698581]  [<c10f4440>] path_openat+0xa0/0x350
[  199.698587]  [<c10f47d5>] do_filp_open+0x35/0x80
[  199.698593]  [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50
[  199.698599]  [<c10ff110>] ? alloc_fd+0xc0/0x100
[  199.698605]  [<c10f0b72>] ? getname_flags+0x72/0x120
[  199.698611]  [<c10e4450>] do_sys_open+0xf0/0x1c0
[  199.698617]  [<c11fcc08>] ? trace_hardirqs_on_thunk+0xc/0x10
[  199.698623]  [<c10e458e>] sys_open+0x2e/0x40
[  199.698628]  [<c144c990>] sysenter_do_call+0x12/0x36
[  199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24
[  199.698884] EIP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc
[  199.698893] CR2: 0000000000000078
[  199.698925] ---[ end trace 77c43ec023940cff ]---

Reported-and-tested-by: Ken Huang <>
Signed-off-by: Johan Hovold <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agopch_uart: Fix MSI setting issue
Tomoya MORINAGA [Mon, 2 Apr 2012 05:36:22 +0000 (14:36 +0900)]
pch_uart: Fix MSI setting issue

commit 867c902e07d5677e2a5b54c0435e589513abde48 upstream.

The following patch (MSI setting) is not enough.

commit e463595fd9c752fa4bf06b47df93ef9ade3c7cf0
Author: Alexander Stein <>
Date:   Mon Jul 4 08:58:31 2011 +0200

    pch_uart: Add MSI support

Signed-off-by: Alexander Stein <>
Signed-off-by: Greg Kroah-Hartman <>
To enable MSI mode, PCI bus-mastering must be enabled.
This patch enables the setting.

cc: Alexander Stein <>
Signed-off-by: Tomoya MORINAGA <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agonohz: Fix stale jiffies update in tick_nohz_restart()
Neal Cardwell [Tue, 27 Mar 2012 19:09:37 +0000 (15:09 -0400)]
nohz: Fix stale jiffies update in tick_nohz_restart()

commit 6f103929f8979d2638e58d7f7fda0beefcb8ee7e upstream.

Fix tick_nohz_restart() to not use a stale ktime_t "now" value when
calling tick_do_update_jiffies64(now).

If we reach this point in the loop it means that we crossed a tick
boundary since we grabbed the "now" timestamp, so at this point "now"
refers to a time in the old jiffy, so using the old value for "now" is
incorrect, and is likely to give us a stale jiffies value.

In particular, the first time through the loop the
tick_do_update_jiffies64(now) call is always a no-op, since the
caller, tick_nohz_restart_sched_tick(), will have already called
tick_do_update_jiffies64(now) with that "now" value.

Note that tick_nohz_stop_sched_tick() already uses the correct
approach: when we notice we cross a jiffy boundary, grab a new
timestamp with ktime_get(), and *then* update jiffies.

Signed-off-by: Neal Cardwell <>
Cc: Ben Segall <>
Cc: Ingo Molnar <>
Signed-off-by: Thomas Gleixner <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agovideo:uvesafb: Fix oops that uvesafb try to execute NX-protected page
Wang YanQing [Sun, 1 Apr 2012 00:54:02 +0000 (08:54 +0800)]
video:uvesafb: Fix oops that uvesafb try to execute NX-protected page

commit b78f29ca0516266431688c5eb42d39ce42ec039a upstream.

This patch fix the oops below that catched in my machine

[   81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev   , OEM: NVIDIA, VBE v3.0
[   81.609384] uvesafb: protected mode interface info at c000:d350
[   81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e
[   81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[   81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers
[   81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used
[   81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915
[   81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   81.744153] BUG: unable to handle kernel paging request at c00cd3b3
[   81.744159] IP: [<c00cd3b3>] 0xc00cd3b2
[   81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163
[   81.744171] Oops: 0011 [#1] SMP
[   81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect
[   81.744178]
[   81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer            Aspire 4741                    /Aspire 4741
[   81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0
[   81.744187] EIP is at 0xc00cd3b3
[   81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000
[   81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00
[   81.744192]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[   81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000)
[   81.744196] Stack:
[   81.744197]  f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0
[   81.744202]  f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000
[   81.744206]  f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400
[   81.744210] Call Trace:
[   81.744215]  [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb]
[   81.744222]  [<c124a9bc>] fb_pan_display+0x10c/0x160
[   81.744226]  [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb]
[   81.744230]  [<c12598dd>] bit_update_start+0x1d/0x50
[   81.744232]  [<c1255efe>] fbcon_switch+0x39e/0x550
[   81.744235]  [<c125a21a>] ? bit_cursor+0x4ea/0x560
[   81.744240]  [<c129b6cb>] redraw_screen+0x12b/0x220
[   81.744245]  [<c128843b>] ? tty_do_resize+0x3b/0xc0
[   81.744247]  [<c129ef42>] vc_do_resize+0x3d2/0x3e0
[   81.744250]  [<c129efb4>] vc_resize+0x14/0x20
[   81.744253]  [<c12586bd>] fbcon_init+0x29d/0x500
[   81.744255]  [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110
[   81.744258]  [<c129b378>] visual_init+0xb8/0x150
[   81.744261]  [<c129c16c>] bind_con_driver+0x16c/0x360
[   81.744264]  [<c129b47e>] ? register_con_driver+0x6e/0x190
[   81.744267]  [<c129c3a1>] take_over_console+0x41/0x50
[   81.744269]  [<c1257b7a>] fbcon_takeover+0x6a/0xd0
[   81.744272]  [<c12594b8>] fbcon_event_notify+0x758/0x790
[   81.744277]  [<c10929e2>] notifier_call_chain+0x42/0xb0
[   81.744280]  [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90
[   81.744283]  [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20
[   81.744285]  [<c124a5a1>] fb_notifier_call_chain+0x11/0x20
[   81.744288]  [<c124b759>] register_framebuffer+0x1d9/0x2b0
[   81.744293]  [<c1061c73>] ? ioremap_wc+0x33/0x40
[   81.744298]  [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb]
[   81.744302]  [<c12bb81f>] platform_drv_probe+0xf/0x20
[   81.744306]  [<c12ba558>] driver_probe_device+0x68/0x170
[   81.744309]  [<c12ba731>] __device_attach+0x41/0x50
[   81.744313]  [<c12b9088>] bus_for_each_drv+0x48/0x70
[   81.744316]  [<c12ba7f3>] device_attach+0x83/0xa0
[   81.744319]  [<c12ba6f0>] ? __driver_attach+0x90/0x90
[   81.744321]  [<c12b991f>] bus_probe_device+0x6f/0x90
[   81.744324]  [<c12b8a45>] device_add+0x5e5/0x680
[   81.744329]  [<c122a1a3>] ? kvasprintf+0x43/0x60
[   81.744332]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744335]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744339]  [<c12bbe9f>] platform_device_add+0xff/0x1b0
[   81.744343]  [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb]
[   81.744346]  [<c100111f>] do_one_initcall+0x2f/0x170
[   81.744350]  [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb]
[   81.744355]  [<c10c6994>] sys_init_module+0xf4/0x1410
[   81.744359]  [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30
[   81.744363]  [<c144cb10>] sysenter_do_call+0x12/0x36
[   81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66
[   81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00
[   81.744391] CR2: 00000000c00cd3b3
[   81.744393] ---[ end trace 18b2c87c925b54d6 ]---

Signed-off-by: Wang YanQing <>
Cc: Michal Januszewski <>
Cc: Alan Cox <>
Signed-off-by: Florian Tobias Schandinat <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoperf hists: Catch and handle out-of-date hist entry maps.
David Miller [Tue, 27 Mar 2012 07:14:18 +0000 (03:14 -0400)]
perf hists: Catch and handle out-of-date hist entry maps.

commit 63fa471dd49e9c9ce029d910d1024330d9b1b145 upstream.

When a process exec()'s, all the maps are retired, but we keep the hist
entries around which hold references to those outdated maps.

If the same library gets mapped in for which we have hist entries, a new
map will be created.  But when we take a perf entry hit within that map,
we'll find the existing hist entry with the older map.

This causes symbol translations to be done incorrectly.  For example,
the perf entry processing will lookup the correct uptodate map entry and
use that to calculate the symbol and DSO relative address.  But later
when we update the histogram we'll translate the address using the
outdated map file instead leading to conditions such as out-of-range
offsets in symbol__inc_addr_samples().

Therefore, update the map of the hist_entry dynamically at lookup/
creation time.

Signed-off-by: David S. Miller <>
Signed-off-by: Arnaldo Carvalho de Melo <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agocciss: Fix scsi tape io with more than 255 scatter gather elements
Stephen M. Cameron [Thu, 22 Mar 2012 20:40:09 +0000 (21:40 +0100)]
cciss: Fix scsi tape io with more than 255 scatter gather elements

commit bc67f63650fad6b3478d9ddfd5406d45a95987c9 upstream.

The total number of scatter gather elements in the CISS command
used by the scsi tape code was being cast to a u8, which can hold
at most 255 scatter gather elements.  It should have been cast to
a u16.  Without this patch the command gets rejected by the controller
since the total scatter gather count did not add up to the right
value resulting in an i/o error.

Signed-off-by: Stephen M. Cameron <>
Signed-off-by: Jens Axboe <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agocciss: Initialize scsi host max_sectors for tape drive support
Stephen M. Cameron [Thu, 22 Mar 2012 20:40:08 +0000 (21:40 +0100)]
cciss: Initialize scsi host max_sectors for tape drive support

commit 395d287526bb60411ff37b19ad9dd38b58ba8732 upstream.

The default is too small (1024 blocks), use h->cciss_max_sectors (8192 blocks)
Without this change, if you try to set the block size of a tape drive above
512*1024, via "mt -f /dev/st0 setblk nnn" where nnn is greater than 524288,
it won't work right.

Signed-off-by: Stephen M. Cameron <>
Signed-off-by: Jens Axboe <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agosparc64: Fix bootup crash on sun4v.
David S. Miller [Fri, 13 Apr 2012 18:56:22 +0000 (11:56 -0700)]
sparc64: Fix bootup crash on sun4v.

commit 9e0daff30fd7ecf698e5d20b0fa7f851e427cca5 upstream.

The DS driver registers as a subsys_initcall() but this can be too
early, in particular this risks registering before we've had a chance
to allocate and setup module_kset in kernel/params.c which is
performed also as a subsyts_initcall().

Register DS using device_initcall() insteal.

Signed-off-by: David S. Miller <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agosparc64: Eliminate obsolete __handle_softirq() function
Paul E. McKenney [Fri, 13 Apr 2012 03:35:13 +0000 (03:35 +0000)]
sparc64: Eliminate obsolete __handle_softirq() function

commit 3d3eeb2ef26112a200785e5fca58ec58dd33bf1e upstream.

The invocation of softirq is now handled by irq_exit(), so there is no
need for sparc64 to invoke it on the trap-return path.  In fact, doing so
is a bug because if the trap occurred in the idle loop, this invocation
can result in lockdep-RCU failures.  The problem is that RCU ignores idle
CPUs, and the sparc64 trap-return path to the softirq handlers fails to
tell RCU that the CPU must be considered non-idle while those handlers
are executing.  This means that RCU is ignoring any RCU read-side critical
sections in those handlers, which in turn means that RCU-protected data
can be yanked out from under those read-side critical sections.

The shiny new lockdep-RCU ability to detect RCU read-side critical sections
that RCU is ignoring located this problem.

The fix is straightforward: Make sparc64 stop manually invoking the
softirq handlers.

Reported-by: Meelis Roos <>
Suggested-by: David Miller <>
Signed-off-by: Paul E. McKenney <>
Tested-by: Meelis Roos <>
Signed-off-by: David S. Miller <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agotty: serial: altera_uart: Check for NULL platform_data in probe.
Yuriy Kozlov [Thu, 29 Mar 2012 07:55:27 +0000 (09:55 +0200)]
tty: serial: altera_uart: Check for NULL platform_data in probe.

commit acede70d6561f2d042d9dbb153d9a3469479c0ed upstream.

Follow altera_jtag_uart.  This fixes a crash if there is a mistake in the DTS.

Signed-off-by: Yuriy Kozlov <>
Signed-off-by: Tobias Klauser <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agostaging: iio: hmc5843: Fix crash in probe function.
Marek Belisko [Thu, 12 Apr 2012 19:48:03 +0000 (21:48 +0200)]
staging: iio: hmc5843: Fix crash in probe function.

commit 62d2feb9803f18c4e3c8a1a2c7e30a54df8a1d72 upstream.

Fix crash after issuing:
echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device

[   37.180999] device: '2-001e': device_add
[   37.188293] bus: 'i2c': add device 2-001e
[   37.194549] PM: Adding info for i2c:2-001e
[   37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843
[   37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e
[   37.224884] HMC5843 initialized
[   37.228759] ------------[ cut here ]------------
[   37.233612] kernel BUG at mm/slab.c:505!
[   37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT
[   37.243103] Modules linked in:
[   37.246337] CPU: 0    Not tainted  (3.3.1-gta04+ #28)
[   37.251647] PC is at kfree+0x84/0x144
[   37.255493] LR is at kfree+0x20/0x144
[   37.259338] pc : [<c00b408c>]    lr : [<c00b4028>]    psr: 40000093
[   37.259368] sp : de249cd8  ip : 0000000c  fp : 00000090
[   37.271362] r10: 0000000a  r9 : de229eac  r8 : c0236274
[   37.276855] r7 : c09d6490  r6 : a0000013  r5 : de229c00  r4 : de229c10
[   37.283691] r3 : c0f00218  r2 : 00000400  r1 : c0eea000  r0 : c00b4028
[   37.290527] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   37.298095] Control: 10c5387d  Table: 9e1d0019  DAC: 00000015
[   37.304107] Process sh (pid: 91, stack limit = 0xde2482f0)
[   37.309844] Stack: (0xde249cd8 to 0xde24a000)
[   37.314422] 9cc0:                                                       de229c10 de229c00
[   37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80
[   37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005
[   37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10
[   37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594
[   37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020
[   37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48
[   37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001
[   37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001
[   37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00
[   37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40
[   37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48
[   37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20
[   37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28
[   37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8
[   37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58
[   37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000
[   37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000
[   37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0
[   37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354
[   37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8
[   37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8
[   37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004
[   37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000
[   37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000
[   37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000
[   37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c)
[   37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990)
[   37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114)
[   37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8)
[   37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218)
[   37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84)
[   37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4)
[   37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c)
[   37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c)
[   37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c)
[   37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130)
[   37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24)
[   37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140)
[   37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178)
[   37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68)
[   37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c)
[   37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2)
[   37.700775] ---[ end trace aaf805debdb69390 ]---

Client data was assigned to iio_dev structure in probe but in
hmc5843_init_client function casted to private driver data structure which
is wrong. Possibly calling mutex_init(&data->lock); corrupt data
which the lead to above crash.

Signed-off-by: Marek Belisko <>
Acked-by: Jonathan Cameron <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agohugetlb: fix race condition in hugetlb_fault()
Chris Metcalf [Thu, 12 Apr 2012 19:49:15 +0000 (12:49 -0700)]
hugetlb: fix race condition in hugetlb_fault()

commit 66aebce747eaf9bc456bf1f1b217d8db843031d0 upstream.

The race is as follows:

Suppose a multi-threaded task forks a new process (on cpu A), thus
bumping up the ref count on all the pages.  While the fork is occurring
(and thus we have marked all the PTEs as read-only), another thread in
the original process (on cpu B) tries to write to a huge page, taking an
access violation from the write-protect and calling hugetlb_cow().  Now,
suppose the fork() fails.  It will undo the COW and decrement the ref
count on the pages, so the ref count on the huge page drops back to 1.
Meanwhile hugetlb_cow() also decrements the ref count by one on the
original page, since the original address space doesn't need it any
more, having copied a new page to replace the original page.  This
leaves the ref count at zero, and when we call unlock_page(), we panic.

fork on CPU A fault on CPU B
============= ==============
while duplicating vmas
if error
up_write(&parent->mmap_sem); ...
handle COW
page_mapcount(old_page) == 2
alloc and prepare new_page
handle error
fold new_page into pte
oops ==> unlock_page(page);

The solution is to take an extra reference to the page while we are
holding the lock on it.

Signed-off-by: Chris Metcalf <>
Cc: Hillf Danton <>
Cc: Michal Hocko <>
Cc: KAMEZAWA Hiroyuki <>
Cc: Hugh Dickins <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrivers/rtc/rtc-pl031.c: enable clock on all ST variants
Linus Walleij [Thu, 12 Apr 2012 19:49:16 +0000 (12:49 -0700)]
drivers/rtc/rtc-pl031.c: enable clock on all ST variants

commit 2f3972168353d355854d6381f1f360ce83b723e5 upstream.

The ST variants of the PL031 all require bit 26 in the control register
to be set before they work properly.  Discovered this when testing on
the Nomadik board where it would suprisingly just stand still.

Signed-off-by: Linus Walleij <>
Cc: Mian Yousaf Kaukab <>
Cc: Alessandro Rubini <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoia64: fix futex_atomic_cmpxchg_inatomic()
Luck, Tony [Mon, 16 Apr 2012 23:28:01 +0000 (16:28 -0700)]
ia64: fix futex_atomic_cmpxchg_inatomic()

commit c76f39bddb84f93f70a5520d9253ec0317bec216 upstream.

Michel Lespinasse cleaned up the futex calling conventions in commit
37a9d912b24f ("futex: Sanitize cmpxchg_futex_value_locked API").

But the ia64 implementation was subtly broken.  Gcc does not know that
register "r8" will be updated by the fault handler if the cmpxchg
instruction takes an exception.  So it feels safe in letting the
initialization of r8 slide to after the cmpxchg.  Result: we always
return 0 whether the user address faulted or not.

Fix by moving the initialization of r8 into the __asm__ code so gcc
won't move it.

Reported-by: <>
Tested-by: <>
Acked-by: Michel Lespinasse <>
Signed-off-by: Tony Luck <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoext4: address scalability issue by removing extent cache statistics
Theodore Ts'o [Mon, 16 Apr 2012 16:16:20 +0000 (12:16 -0400)]
ext4: address scalability issue by removing extent cache statistics

commit 9cd70b347e9761ea2d2ac3d758c529a48a8193e6 upstream.

Andi Kleen and Tim Chen have reported that under certain circumstances
the extent cache statistics are causing scalability problems due to
cache line bounces.

Signed-off-by: "Theodore Ts'o" <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoBluetooth: hci_ldisc: fix NULL-pointer dereference on tty_close
Johan Hovold [Thu, 15 Mar 2012 13:48:40 +0000 (14:48 +0100)]
Bluetooth: hci_ldisc: fix NULL-pointer dereference on tty_close

commit 33b69bf80a3704d45341928e4ff68b6ebd470686 upstream.

Do not close protocol driver until device has been unregistered.

This fixes a race between tty_close and hci_dev_open which can result in
a NULL-pointer dereference.

The line discipline closes the protocol driver while we may still have
hci_dev_open sleeping on the req_lock mutex resulting in a NULL-pointer
dereference when lock is acquired and hci_init_req called.

Bug is 100% reproducible using hciattach and a disconnected serial port:

0. # hciattach -n ttyO1 any noflow

1. hci_dev_open called from hci_power_on grabs req lock
2. hci_init_req executes but device fails to initialise (times out
3. hci_dev_open is called from hci_sock_ioctl and sleeps on req lock
4. hci_uart_tty_close detaches protocol driver and cancels init req
5. hci_dev_open (1) releases req lock
6. hci_dev_open (3) grabs req lock, calls hci_init_req, which triggers oops
   when request is prepared in hci_uart_send_frame

[  137.201263] Unable to handle kernel NULL pointer dereference at virtual address 00000028
[  137.209838] pgd = c0004000
[  137.212677] [00000028] *pgd=00000000
[  137.216430] Internal error: Oops: 17 [#1]
[  137.220642] Modules linked in:
[  137.223846] CPU: 0    Tainted: G        W     (3.3.0-rc6-dirty #406)
[  137.230529] PC is at __lock_acquire+0x5c/0x1ab0
[  137.235290] LR is at lock_acquire+0x9c/0x128
[  137.239776] pc : [<c0071490>]    lr : [<c00733f8>]    psr: 20000093
[  137.239776] sp : cf869dd8  ip : c0529554  fp : c051c730
[  137.251800] r10: 00000000  r9 : cf8673c0  r8 : 00000080
[  137.257293] r7 : 00000028  r6 : 00000002  r5 : 00000000  r4 : c053fd70
[  137.264129] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000001
[  137.270965] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[  137.278717] Control: 10c5387d  Table: 8f0f4019  DAC: 00000015
[  137.284729] Process kworker/u:1 (pid: 7, stack limit = 0xcf8682e8)
[  137.291229] Stack: (0xcf869dd8 to 0xcf86a000)
[  137.295776] 9dc0:                                                       c0529554 00000000
[  137.304351] 9de0: cf8673c0 cf868000 d03ea1ef cf868000 000001ef 00000470 00000000 00000002
[  137.312927] 9e00: cf8673c0 00000001 c051c730 c00716ec 0000000c 00000440 c0529554 00000001
[  137.321533] 9e20: c051c730 cf868000 d03ea1f3 00000000 c053b978 00000000 00000028 cf868000
[  137.330078] 9e40: 00000000 00000000 00000002 00000000 00000000 c00733f8 00000002 00000080
[  137.338684] 9e60: 00000000 c02a1d50 00000000 00000001 60000013 c0969a1c 60000093 c053b96c
[  137.347259] 9e80: 00000002 00000018 20000013 c02a1d50 cf0ac000 00000000 00000002 cf868000
[  137.355834] 9ea0: 00000089 c0374130 00000002 00000000 c02a1d50 cf0ac000 0000000c cf0fc540
[  137.364410] 9ec0: 00000018 c02a1d50 cf0fc540 00000000 cf0fc540 c0282238 c028220c cf178d80
[  137.372985] 9ee0: 127525d8 c02821cc 9a1fa451 c032727c 9a1fa451 127525d8 cf0fc540 cf0ac4ec
[  137.381561] 9f00: cf0ac000 cf0fc540 cf0ac584 c03285f4 c0328580 cf0ac4ec cf85c740 c05510cc
[  137.390136] 9f20: ce825400 c004c914 00000002 00000000 c004c884 ce8254f5 cf869f48 00000000
[  137.398712] 9f40: c0328580 ce825415 c0a7f914 c061af64 00000000 c048cf3c cf8673c0 cf85c740
[  137.407287] 9f60: c05510cc c051a66c c05510ec c05510c4 cf85c750 cf868000 00000089 c004d6ac
[  137.415863] 9f80: 00000000 c0073d14 00000001 cf853ed8 cf85c740 c004d558 00000013 00000000
[  137.424438] 9fa0: 00000000 00000000 00000000 c00516b0 00000000 00000000 cf85c740 00000000
[  137.433013] 9fc0: 00000001 dead4ead ffffffff ffffffff c0551674 00000000 00000000 c0450aa4
[  137.441589] 9fe0: cf869fe0 cf869fe0 cf853ed8 c005162c c0013b30 c0013b30 00ffff00 00ffff00
[  137.450164] [<c0071490>] (__lock_acquire+0x5c/0x1ab0) from [<c00733f8>] (lock_acquire+0x9c/0x128)
[  137.459503] [<c00733f8>] (lock_acquire+0x9c/0x128) from [<c0374130>] (_raw_spin_lock_irqsave+0x44/0x58)
[  137.469360] [<c0374130>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c02a1d50>] (skb_queue_tail+0x18/0x48)
[  137.479339] [<c02a1d50>] (skb_queue_tail+0x18/0x48) from [<c0282238>] (h4_enqueue+0x2c/0x34)
[  137.488189] [<c0282238>] (h4_enqueue+0x2c/0x34) from [<c02821cc>] (hci_uart_send_frame+0x34/0x68)
[  137.497497] [<c02821cc>] (hci_uart_send_frame+0x34/0x68) from [<c032727c>] (hci_send_frame+0x50/0x88)
[  137.507171] [<c032727c>] (hci_send_frame+0x50/0x88) from [<c03285f4>] (hci_cmd_work+0x74/0xd4)
[  137.516204] [<c03285f4>] (hci_cmd_work+0x74/0xd4) from [<c004c914>] (process_one_work+0x1a0/0x4ec)
[  137.525604] [<c004c914>] (process_one_work+0x1a0/0x4ec) from [<c004d6ac>] (worker_thread+0x154/0x344)
[  137.535278] [<c004d6ac>] (worker_thread+0x154/0x344) from [<c00516b0>] (kthread+0x84/0x90)
[  137.543975] [<c00516b0>] (kthread+0x84/0x90) from [<c0013b30>] (kernel_thread_exit+0x0/0x8)
[  137.552734] Code: e59f4e5c e5941000 e3510000 0a000031 (e5971000)
[  137.559234] ---[ end trace 1b75b31a2719ed1e ]---

Signed-off-by: Johan Hovold <>
Acked-by: Marcel Holtmann <>
Signed-off-by: Johan Hedberg <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoBluetooth: uart-ldisc: Fix memory leak
Johan Hovold [Wed, 11 Apr 2012 09:24:35 +0000 (11:24 +0200)]
Bluetooth: uart-ldisc: Fix memory leak

This is a partial, self-contained, minimal backport of commit
797fe796c4335b35d95d5326824513befdb5d1e9 upstream which fixes the memory

Bluetooth: uart-ldisc: Fix memory leak and remove destruct cb

We currently leak the hci_uart object if HCI_UART_PROTO_SET is never set
because the hci-destruct callback will then never be called.  This fix
removes the hci-destruct callback and frees the driver internal private
hci_uart object directly on tty-close. We call hci_unregister_dev() here
so the hci-core will never call our callbacks again (except destruct).
Therefore, we can safely free the driver internal data right away and
set the destruct callback to NULL.

Signed-off-by: David Herrmann <>
Acked-by: Marcel Holtmann <>
Signed-off-by: Johan Hedberg <>
Signed-off-by: Johan Hovold <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agomd/bitmap: prevent bitmap_daemon_work running while initialising bitmap
NeilBrown [Thu, 12 Apr 2012 06:05:06 +0000 (16:05 +1000)]
md/bitmap: prevent bitmap_daemon_work running while initialising bitmap

commit afbaa90b80b1ec66e5137cc3824746bfdf559b18 upstream.

If a bitmap is added while the array is active, it is possible
for bitmap_daemon_work to run while the bitmap is being
This is particularly a problem if bitmap_daemon_work sees
bitmap->filemap as non-NULL before it has been filled in properly.
So hold bitmap_info.mutex while filling in ->filemap
to prevent problems.

This patch is suitable for any -stable kernel, though it might not
apply cleanly before about 3.1.

Signed-off-by: NeilBrown <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE
Jonathan Austin [Thu, 12 Apr 2012 16:45:25 +0000 (17:45 +0100)]
ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE

commit 078c04545ba56da21567728a909a496df5ff730d upstream.

Currently when ThumbEE is not enabled (!CONFIG_ARM_THUMBEE) the ThumbEE
register states are not saved/restored at context switch. The default state
of the ThumbEE Ctrl register (TEECR) allows userspace accesses to the
ThumbEE Base Handler register (TEEHBR). This can cause unexpected behaviour
when people use ThumbEE on !CONFIG_ARM_THUMBEE kernels, as well as allowing
covert communication - eg between userspace tasks running inside chroot

This patch sets up TEECR in order to prevent user-space access to TEEHBR
when !CONFIG_ARM_THUMBEE. In this case, tasks are sent SIGILL if they try to
access TEEHBR.

Reviewed-by: Will Deacon <>
Signed-off-by: Jonathan Austin <>
Signed-off-by: Russell King <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoARM: 7379/1: DT: fix atags_to_fdt() second call site
Marc Zyngier [Wed, 11 Apr 2012 13:52:55 +0000 (14:52 +0100)]
ARM: 7379/1: DT: fix atags_to_fdt() second call site

commit 9c5fd9e85f574d9d0361b2b878f55732290afe5b upstream.

atags_to_fdt() returns 1 when it fails to find a valid FDT signature.
The CONFIG_ARM_ATAG_DTB_COMPAT code is supposed to retry with another
location, but only does so when the initial call doesn't fail.

Fix this by using the correct condition in the assembly code.

Acked-by: Nicolas Pitre <>
Signed-off-by: Marc Zyngier <>
Signed-off-by: Russell King <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agortlwifi: Add missing DMA buffer unmapping for PCI drivers
Larry Finger [Mon, 26 Mar 2012 15:48:20 +0000 (10:48 -0500)]
rtlwifi: Add missing DMA buffer unmapping for PCI drivers

commit 673f7786e205c87b5d978c62827b9a66d097bebb upstream.

In, a system with driver
rtl8192se used as an AP suffers from "Out of SW-IOMMU space" errors. These
are caused by the DMA buffers used for beacons never being unmapped.

This bug was also reported at

Reported-and-Tested-by: Da Xue <>
Signed-off-by: Larry Finger <>
Signed-off-by: John W. Linville <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrm/i915: make rc6 module parameter read-only
Jesse Barnes [Wed, 11 Apr 2012 16:39:02 +0000 (09:39 -0700)]
drm/i915: make rc6 module parameter read-only

commit f57f9c167af7cb3fd315e6a8ebe194a8aea0832a upstream.

People have been getting confused and thinking this is a runtime control.

Signed-off-by: Jesse Barnes <>
Signed-off-by: Daniel Vetter <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrm/i915: properly compute dp dithering for user-created modes
Daniel Vetter [Tue, 10 Apr 2012 08:42:36 +0000 (10:42 +0200)]
drm/i915: properly compute dp dithering for user-created modes

commit c4867936474183332db4c19791a65fdad6474fd5 upstream.

We've only computed whether we need to fall back to 6bpc due to dp
link bandwidth constrains in mode_valid, but not mode_fixup. Under
various circumstances X likes to create new modes which then lack
proper 6bpc flags (if required), resulting in mode_fixup failures and
ultimately black screens.

Chris Wilson pointed out that we still get things wrong for bpp > 24,
but that should be fixed in another patch (and it'll be easier because
this patch consolidates the logic).

The likely culprit for this regression is

commit 3d794f87238f74d80e78a7611c7fbde8a54c85c2
Author: Keith Packard <>
Date:   Wed Jan 25 08:16:25 2012 -0800

    drm/i915: Force explicit bpp selection for intel_dp_link_required

v2: Fix indentation and tune down the too bold claim that this should
fix the world. Both noticed by Chris Wilson.

v3: Try to really git add things.

Reported-and-tested-by: Brice Goglin <>
Reviewed-by: Adam Jackson <>
Signed-Off-by: Daniel Vetter <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrm/radeon: only add the mm i2c bus if the hw_i2c module param is set
Alex Deucher [Tue, 10 Apr 2012 16:14:27 +0000 (12:14 -0400)]
drm/radeon: only add the mm i2c bus if the hw_i2c module param is set

commit 46783150a6552f9513f08e62cfcc07125d6e502b upstream.

It seems it can corrupt the monitor EDID in certain cases on certain
boards when running sensors detect.  It's rarely used anyway outside
of AIW boards.

Signed-off-by: Alex Deucher <>
Acked-by: Jean Delvare <>
Signed-off-by: Dave Airlie <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g
Chris Wilson [Mon, 9 Apr 2012 12:59:46 +0000 (13:59 +0100)]
drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g

commit 27c1cbd06a7620b354cbb363834f3bb8df4f410d upstream.

The 845g shares the errata with i830 whereby executing a command
within 2 cachelines of the end of the ringbuffer may cause a GPU hang.

Signed-off-by: Chris Wilson <>
Signed-off-by: Daniel Vetter <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrm/radeon/kms: fix DVO setup on some r4xx chips
Alex Deucher [Tue, 3 Apr 2012 21:05:41 +0000 (17:05 -0400)]
drm/radeon/kms: fix DVO setup on some r4xx chips

commit afceb9319f21b18ee3bc15ee9a5f92e18ef8a8c9 upstream.

Some r4xx chips have the wrong frev in the
DVOEncoderControl table.  It should always be 1
on r4xx.  Fixes modesetting on DVO on r4xx chips
with the bad frev.

Reported by twied on #radeon.

Signed-off-by: Alex Deucher <>
Signed-off-by: Dave Airlie <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agodrm/i915: mask transcoder select bits before setting them on LVDS
Jesse Barnes [Thu, 12 Jan 2012 22:51:17 +0000 (14:51 -0800)]
drm/i915: mask transcoder select bits before setting them on LVDS

commit 7885d2052bd94395e337709cfba093a41f273ff1 upstream.

The transcoder port may changed from mode set to mode set, so make sure
to mask out the selection bits before setting the right ones or we'll
get black screens when going from transcoder B to A.

Tested-by: Vincent Vanackere <>
Signed-off-by: Jesse Barnes <>
Reviewed-by: Keith Packard <>
Signed-off-by: Keith Packard <>
Cc: Jonathan Nieder <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoLinux 3.2.15 v3.2.15
Greg Kroah-Hartman [Fri, 13 Apr 2012 16:11:03 +0000 (09:11 -0700)]
Linux 3.2.15

11 years agoBluetooth: Fix l2cap conn failures for ssp devices
Peter Hurley [Mon, 2 Apr 2012 11:44:56 +0000 (13:44 +0200)]
Bluetooth: Fix l2cap conn failures for ssp devices

commit 18daf1644e634bae951a6e3d4d19d89170209762 upstream

Commit 330605423c fixed l2cap conn establishment for non-ssp remote
devices by not setting HCI_CONN_ENCRYPT_PEND every time conn security
is tested (which was always returning failure on any subsequent
security checks).

However, this broke l2cap conn establishment for ssp remote devices
when an ACL link was already established at SDP-level security. This
fix ensures that encryption must be pending whenever authentication
is also pending.

Signed-off-by: Peter Hurley <>
Tested-by: Daniel Wagner <>
Acked-by: Marcel Holtmann <>
Signed-off-by: Johan Hedberg <>
11 years agoiommu/amd: Make sure IOMMU interrupts are re-enabled on resume
Joerg Roedel [Wed, 11 Apr 2012 16:40:38 +0000 (18:40 +0200)]
iommu/amd: Make sure IOMMU interrupts are re-enabled on resume

commit 9ddd592a191b32f2ee6c4b6ed2bd52665c3a49f5 upstream

Unfortunatly the interrupts for the event log and the
peripheral page-faults are only enabled at boot but not
re-enabled at resume. Fix that for 3.2.

Signed-off-by: Joerg Roedel <>
11 years agocred: copy_process() should clear child->replacement_session_keyring
Oleg Nesterov [Mon, 9 Apr 2012 19:03:50 +0000 (21:03 +0200)]
cred: copy_process() should clear child->replacement_session_keyring

commit 79549c6dfda0603dba9a70a53467ce62d9335c33 upstream.

keyctl_session_to_parent(task) sets ->replacement_session_keyring,
it should be processed and cleared by key_replace_session_keyring().

However, this task can fork before it notices TIF_NOTIFY_RESUME and
the new child gets the bogus ->replacement_session_keyring copied by
dup_task_struct(). This is obviously wrong and, if nothing else, this
leads to put_cred(already_freed_cred).

change copy_creds() to clear this member. If copy_process() fails
before this point the wrong ->replacement_session_keyring doesn't
matter, exit_creds() won't be called.

Signed-off-by: Oleg Nesterov <>
Acked-by: David Howells <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoASoC: ak4642: fixup: mute needs +1 step
Kuninori Morimoto [Thu, 5 Apr 2012 06:28:01 +0000 (23:28 -0700)]
ASoC: ak4642: fixup: mute needs +1 step

commit 1f99e44cf059d2ed43c5a0724fa738b83800f725 upstream.

ak4642 out_tlv is +12.0dB to -115.0 dB, and it supports mute.
But current settings didn't care +1 step for mute.
This patch adds it

Signed-off-by: Kuninori Morimoto <>
Signed-off-by: Mark Brown <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoioat: fix size of 'completion' for Xen
Dan Williams [Fri, 23 Mar 2012 20:36:42 +0000 (13:36 -0700)]
ioat: fix size of 'completion' for Xen

commit 275029353953c2117941ade84f02a2303912fad1 upstream.

Starting with v3.2 Jonathan reports that Xen crashes loading the ioatdma
driver.  A debug run shows:

  ioatdma 0000:00:16.4: desc[0]: (0x300cc7000->0x300cc7040) cookie: 0 flags: 0x2 ctl: 0x29 (op: 0 int_en: 1 compl: 1)
  ioatdma 0000:00:16.4: ioat_get_current_completion: phys_complete: 0xcc7000

...which shows that in this environment GFP_KERNEL memory may be backed
by a 64-bit dma address.  This breaks the driver's assumption that an
unsigned long should be able to contain the physical address for
descriptor memory.  Switch to dma_addr_t which beyond being the right
size, is the true type for the data i.e. an io-virtual address
inidicating the engine's last processed descriptor.

Reported-by: Jonathan Nieder <>
Reported-by: William Dauchy <>
Tested-by: William Dauchy <>
Tested-by: Dave Jiang <>
Signed-off-by: Dan Williams <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoUSB: Add Motorola Rokr E6 Id to the USBNet driver "zaurus"
Guan Xin [Mon, 26 Mar 2012 04:11:46 +0000 (04:11 +0000)]
USB: Add Motorola Rokr E6 Id to the USBNet driver "zaurus"

commit a2daf263107ba3eb6db33931881731fa51c95045 upstream.

Added Vendor/Device Id of Motorola Rokr E6 (22b8:6027) so it can be
recognized by the "zaurus" USBNet driver.
Applies to Linux 3.2.13 and
Signed-off-by: Guan Xin <>
Signed-off-by: David S. Miller <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agomfd: Clear twl6030 IRQ status register only once
Nishanth Menon [Thu, 23 Feb 2012 02:03:45 +0000 (20:03 -0600)]
mfd: Clear twl6030 IRQ status register only once

commit 3f8349e6e98ba0455437724589072523865eae5e upstream.

TWL6030 family of PMIC use a shadow interrupt status register
while kernel processes the current interrupt event.
However, any write(0 or 1) to register INT_STS_A, INT_STS_B or
INT_STS_C clears all 3 interrupt status registers.

Since clear of the interrupt is done on 32k clk, depending on I2C
bus speed, we could in-adverently clear the status of a interrupt
status pending on shadow register in the current implementation.
This is due to the fact that multi-byte i2c write operation into
three seperate status register could result in multiple load
and clear of status and result in lost interrupts.

Instead, doing a single byte write to INT_STS_A register with 0x0
will clear all three interrupt status registers without the related

Acked-by: Santosh Shilimkar <>
Signed-off-by: Nishanth Menon <>
Signed-off-by: Samuel Ortiz <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agosched/x86: Fix overflow in cyc2ns_offset
Salman Qazi [Sat, 10 Mar 2012 00:41:01 +0000 (16:41 -0800)]
sched/x86: Fix overflow in cyc2ns_offset

commit 9993bc635d01a6ee7f6b833b4ee65ce7c06350b1 upstream.

When a machine boots up, the TSC generally gets reset.  However,
when kexec is used to boot into a kernel, the TSC value would be
carried over from the previous kernel.  The computation of
cycns_offset in set_cyc2ns_scale is prone to an overflow, if the
machine has been up more than 208 days prior to the kexec.  The
overflow happens when we multiply *scale, even though there is
enough room to store the final answer.

We fix this issue by decomposing tsc_now into the quotient and
remainder of division by CYC2NS_SCALE_FACTOR and then performing
the multiplication separately on the two components.

Refactor code to share the calculation with the previous
fix in __cycles_2_ns().

Signed-off-by: Salman Qazi <>
Acked-by: John Stultz <>
Acked-by: Peter Zijlstra <>
Cc: Paul Turner <>
Cc: john stultz <>
Signed-off-by: Ingo Molnar <>
Cc: Mike Galbraith <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoFix length of buffer copied in __nfs4_get_acl_uncached
Sachin Prabhu [Thu, 22 Mar 2012 16:46:28 +0000 (16:46 +0000)]
Fix length of buffer copied in __nfs4_get_acl_uncached

commit 20e0fa98b751facf9a1101edaefbc19c82616a68 upstream.

_copy_from_pages() used to copy data from the temporary buffer to the
user passed buffer is passed the wrong size parameter when copying
data. res.acl_len contains both the bitmap and acl lenghts while
acl_len contains the acl length after adjusting for the bitmap size.

Signed-off-by: Sachin Prabhu <>
Signed-off-by: Trond Myklebust <>
Cc: Josh Boyer <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoacer-wmi: No wifi rfkill on Sony machines
Lee, Chun-Yi [Fri, 23 Mar 2012 04:36:44 +0000 (12:36 +0800)]
acer-wmi: No wifi rfkill on Sony machines

commit 5719b81988f3c24ff694dc3a37e35b35630a3966 upstream.

The wireless rfkill should charged by sony-laptop but not acer-wmi.
So, add Sony's SNY5001 acpi device to blacklist in acer-wmi.

Tested on Sony Vaio

Cc: Carlos Corbacho <>
Cc: Matthew Garrett <>
Cc: Mattia Dongili <>
Cc: Dimitris N <>
Tested-by: Dimitris N <>
Signed-off-by: Lee, Chun-Yi <>
Signed-off-by: Matthew Garrett <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoRevert "x86/ioapic: Add register level checks to detect bogus io-apic entries"
Greg Kroah-Hartman [Tue, 10 Apr 2012 23:04:49 +0000 (16:04 -0700)]
Revert "x86/ioapic: Add register level checks to detect bogus io-apic entries"

This reverts commit 273fb194e86b795b08a724c7646d0f694949070b
[73d63d038ee9f769f5e5b46792d227fe20e442c5 upstream]

It causes problems, so needs to be reverted from 3.2-stable for now.

Reported-by: Konrad Rzeszutek Wilk <>
Cc: Jon Dufresne <>
Cc: Suresh Siddha <>
Cc: <>
Cc: Josh Boyer <>
Cc: Ingo Molnar <>
Cc: Teck Choon Giam <>
Cc: Ben Guthro <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agoTOMOYO: Fix mount flags checking order.
Tetsuo Handa [Wed, 29 Feb 2012 12:53:22 +0000 (21:53 +0900)]
TOMOYO: Fix mount flags checking order.

commit df91e49477a9be15921cb2854e1d12a3bdb5e425 upstream.

Userspace can pass in arbitrary combinations of MS_* flags to mount().

passed, device name which should be checked for MS_BIND was not checked because

If both one of MS_BIND/MS_MOVE and MS_REMOUNT are passed, device name which
should not be checked for MS_REMOUNT was checked because MS_BIND/MS_MOVE had
higher priority than MS_REMOUNT.

Fix these bugs by changing priority to MS_REMOUNT -> MS_BIND ->

Also, unconditionally return -EINVAL if more than one of
generate inaccurate audit logs, for commit 7a2e8a8f "VFS: Sanity check mount
flags passed to change_mnt_propagation()" clarified that these flags must be
exclusively passed.

Signed-off-by: Tetsuo Handa <>
Signed-off-by: James Morris <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agox86/PCI: do not tie MSI MS-7253 use_crs quirk to BIOS version
Jonathan Nieder [Tue, 28 Feb 2012 21:31:35 +0000 (15:31 -0600)]
x86/PCI: do not tie MSI MS-7253 use_crs quirk to BIOS version

commit a97f4f5e524bcd09a85ef0b8821a14d35e69335f upstream.

Carlos was getting

WARNING: at drivers/pci/pci.c:118 pci_ioremap_bar+0x24/0x52()

when probing his sound card, and sound did not work.  After adding
pci=use_crs to the kernel command line, no more trouble.

Ok, we can add a quirk.  dmidecode output reveals that this is an MSI
MS-7253, for which we already have a quirk, but the short-sighted
author tied the quirk to a single BIOS version, making it not kick in
on Carlos's machine with BIOS V1.2.  If a later BIOS update makes it
no longer necessary to look at the _CRS info it will still be
harmless, so let's stop trying to guess which versions have and don't
have accurate _CRS tables.

Also see <>.

Reported-by: Carlos Luna <>
Reviewed-by: Bjorn Helgaas <>
Signed-off-by: Jonathan Nieder <>
Signed-off-by: Jesse Barnes <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agox86/PCI: use host bridge _CRS info on MSI MS-7253
Jonathan Nieder [Tue, 28 Feb 2012 18:51:10 +0000 (11:51 -0700)]
x86/PCI: use host bridge _CRS info on MSI MS-7253

commit 8411371709610c826bf65684f886bfdfb5780ca1 upstream.

In the spirit of commit 29cf7a30f8a0 ("x86/PCI: use host bridge _CRS
info on ASUS M2V-MX SE"), this DMI quirk turns on "pci_use_crs" by
default on a board that needs it.

This fixes boot failures and oopses introduced in 3e3da00c01d0
("x86/pci: AMD one chain system to use pci read out res").  The quirk
is quite targetted (to a specific board and BIOS version) for two

 (1) to emphasize that this method of tackling the problem one quirk
     at a time is a little insane

 (2) to give BIOS vendors an opportunity to use simpler tables and
     allow us to return to generic behavior (whatever that happens to
     be) with a later BIOS update

In other words, I am not at all happy with having quirks like this.
But it is even worse for the kernel not to work out of the box on
these machines, so...

Reported-by: Svante Signell <>
Signed-off-by: Jonathan Nieder <>
Signed-off-by: Bjorn Helgaas <>
Signed-off-by: Jesse Barnes <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agomodpost: Fix modpost license checking of vmlinux.o
Frank Rowand [Tue, 10 Apr 2012 00:59:03 +0000 (17:59 -0700)]
modpost: Fix modpost license checking of vmlinux.o

commit 258f742635360175564e9470eb060ff4d4b984e7 upstream.

Commit f02e8a6596b7 ("module: Sort exported symbols") sorts symbols
placing each of them in its own elf section.  This sorting and merging
into the canonical sections are done by the linker.

Unfortunately modpost to generate Module.symvers file parses vmlinux.o
(which is not linked yet) and all modules object files (which aren't
linked yet).  These aren't sanitized by the linker yet.  That breaks
modpost that can't detect license properly for modules.

This patch makes modpost aware of the new exported symbols structure.

[ This above is a slightly corrected version of the explanation of the
  problem, copied from commit 62a2635610db ("modpost: Fix modpost's
  license checking V3").  That commit fixed the problem for module
  object files, but not for vmlinux.o.  This patch fixes modpost for
  vmlinux.o. ]

Signed-off-by: Frank Rowand <>
Signed-off-by: Alessio Igor Bogani <>
Signed-off-by: Linus Torvalds <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agosysctl: fix write access to dmesg_restrict/kptr_restrict
Kees Cook [Wed, 4 Apr 2012 18:40:19 +0000 (11:40 -0700)]
sysctl: fix write access to dmesg_restrict/kptr_restrict

commit 620f6e8e855d6d447688a5f67a4e176944a084e8 upstream.

Commit bfdc0b4 adds code to restrict access to dmesg_restrict,
however, it incorrectly alters kptr_restrict rather than

The original patch from Richard Weinberger
( alters dmesg_restrict as
expected, and so the patch seems to have been misapplied.

This adds the CAP_SYS_ADMIN check to both dmesg_restrict and
kptr_restrict, since both are sensitive.

Reported-by: Phillip Lougher <>
Signed-off-by: Kees Cook <>
Acked-by: Serge Hallyn <>
Acked-by: Richard Weinberger <>
Signed-off-by: James Morris <>
Signed-off-by: Greg Kroah-Hartman <>
11 years agotcm_fc: Do not free tpg structure during wq allocation failure
Mark Rustad [Tue, 3 Apr 2012 17:24:52 +0000 (10:24 -0700)]
tcm_fc: Do not free tpg structure during wq allocation failure

commit 06383f10c49f507220594a455c6491ca6f8c94ab upstream.

Avoid freeing a registered tpg structure if an alloc_workqueue call
fails.  This fixes a bug where the failure was leaking memory associated
with se_portal_group setup during the original core_tpg_register() call.

Signed-off-by: Mark Rustad <>
Acked-by: Kiran Patil <>
Signed-off-by: Nicholas Bellinger <>
Signed-off-by: Greg Kroah-Hartman <>