pandora-kernel.git
10 years agoMerge branch 'btrfs-3.0' of git://github.com/chrismason/linux
Linus Torvalds [Mon, 3 Oct 2011 19:17:44 +0000 (12:17 -0700)]
Merge branch 'btrfs-3.0' of git://github.com/chrismason/linux

* 'btrfs-3.0' of git://github.com/chrismason/linux:
  Btrfs: force a page fault if we have a shorty copy on a page boundary

10 years agoMerge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6
Linus Torvalds [Mon, 3 Oct 2011 02:23:44 +0000 (19:23 -0700)]
Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6

* 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6:
  mfd: Fix generic irq chip ack function name for jz4740-adc

10 years agoMerge branch 'for-linus' of git://github.com/tiwai/sound
Linus Torvalds [Mon, 3 Oct 2011 02:22:44 +0000 (19:22 -0700)]
Merge branch 'for-linus' of git://github.com/tiwai/sound

* 'for-linus' of git://github.com/tiwai/sound:
  ALSA: hda - Fix a regression of the position-buffer check

10 years agoMerge branch 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
Linus Torvalds [Sun, 2 Oct 2011 00:46:13 +0000 (17:46 -0700)]
Merge branch 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  perf tools: Fix raw sample reading

10 years agoMerge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for...
Linus Torvalds [Sat, 1 Oct 2011 15:37:25 +0000 (08:37 -0700)]
Merge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  irq: Fix check for already initialized irq_domain in irq_domain_add
  irq: Add declaration of irq_domain_simple_ops to irqdomain.h

* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  x86/rtc: Don't recursively acquire rtc_lock

* 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  posix-cpu-timers: Cure SMP wobbles
  sched: Fix up wchan borkage
  sched/rt: Migrate equal priority tasks to available CPUs

10 years agoBtrfs: force a page fault if we have a shorty copy on a page boundary
Josef Bacik [Fri, 30 Sep 2011 19:23:54 +0000 (15:23 -0400)]
Btrfs: force a page fault if we have a shorty copy on a page boundary

A user reported a problem where ceph was getting into 100% cpu usage while doing
some writing.  It turns out it's because we were doing a short write on a not
uptodate page, which means we'd fall back at one page at a time and fault the
page in.  The problem is our position is on the page boundary, so our fault in
logic wasn't actually reading the page, so we'd just spin forever or until the
page got read in by somebody else.  This will force a readpage if we end up
doing a short copy.  Alexandre could reproduce this easily with ceph and reports
it fixes his problem.  I also wrote a reproducer that no longer hangs my box
with this patch.  Thanks,

Reported-and-tested-by: Alexandre Oliva <aoliva@redhat.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
10 years agoMerge branch 'perf/urgent' of git://github.com/acmel/linux into perf/urgent
Ingo Molnar [Fri, 30 Sep 2011 18:08:56 +0000 (20:08 +0200)]
Merge branch 'perf/urgent' of git://github.com/acmel/linux into perf/urgent

10 years agoposix-cpu-timers: Cure SMP wobbles
Peter Zijlstra [Thu, 1 Sep 2011 10:42:04 +0000 (12:42 +0200)]
posix-cpu-timers: Cure SMP wobbles

David reported:

  Attached below is a watered-down version of rt/tst-cpuclock2.c from
  GLIBC.  Just build it with "gcc -o test test.c -lpthread -lrt" or
  similar.

  Run it several times, and you will see cases where the main thread
  will measure a process clock difference before and after the nanosleep
  which is smaller than the cpu-burner thread's individual thread clock
  difference.  This doesn't make any sense since the cpu-burner thread
  is part of the top-level process's thread group.

  I've reproduced this on both x86-64 and sparc64 (using both 32-bit and
  64-bit binaries).

  For example:

  [davem@boricha build-x86_64-linux]$ ./test
  process: before(0.001221967) after(0.498624371) diff(497402404)
  thread:  before(0.000081692) after(0.498316431) diff(498234739)
  self:    before(0.001223521) after(0.001240219) diff(16698)
  [davem@boricha build-x86_64-linux]$

  The diff of 'process' should always be >= the diff of 'thread'.

  I make sure to wrap the 'thread' clock measurements the most tightly
  around the nanosleep() call, and that the 'process' clock measurements
  are the outer-most ones.

  ---
  #include <unistd.h>
  #include <stdio.h>
  #include <stdlib.h>
  #include <time.h>
  #include <fcntl.h>
  #include <string.h>
  #include <errno.h>
  #include <pthread.h>

  static pthread_barrier_t barrier;

  static void *chew_cpu(void *arg)
  {
  pthread_barrier_wait(&barrier);
  while (1)
  __asm__ __volatile__("" : : : "memory");
  return NULL;
  }

  int main(void)
  {
  clockid_t process_clock, my_thread_clock, th_clock;
  struct timespec process_before, process_after;
  struct timespec me_before, me_after;
  struct timespec th_before, th_after;
  struct timespec sleeptime;
  unsigned long diff;
  pthread_t th;
  int err;

  err = clock_getcpuclockid(0, &process_clock);
  if (err)
  return 1;

  err = pthread_getcpuclockid(pthread_self(), &my_thread_clock);
  if (err)
  return 1;

  pthread_barrier_init(&barrier, NULL, 2);
  err = pthread_create(&th, NULL, chew_cpu, NULL);
  if (err)
  return 1;

  err = pthread_getcpuclockid(th, &th_clock);
  if (err)
  return 1;

  pthread_barrier_wait(&barrier);

  err = clock_gettime(process_clock, &process_before);
  if (err)
  return 1;

  err = clock_gettime(my_thread_clock, &me_before);
  if (err)
  return 1;

  err = clock_gettime(th_clock, &th_before);
  if (err)
  return 1;

  sleeptime.tv_sec = 0;
  sleeptime.tv_nsec = 500000000;
  nanosleep(&sleeptime, NULL);

  err = clock_gettime(th_clock, &th_after);
  if (err)
  return 1;

  err = clock_gettime(my_thread_clock, &me_after);
  if (err)
  return 1;

  err = clock_gettime(process_clock, &process_after);
  if (err)
  return 1;

  diff = process_after.tv_nsec - process_before.tv_nsec;
  printf("process: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 process_before.tv_sec, process_before.tv_nsec,
 process_after.tv_sec, process_after.tv_nsec, diff);
  diff = th_after.tv_nsec - th_before.tv_nsec;
  printf("thread:  before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 th_before.tv_sec, th_before.tv_nsec,
 th_after.tv_sec, th_after.tv_nsec, diff);
  diff = me_after.tv_nsec - me_before.tv_nsec;
  printf("self:    before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 me_before.tv_sec, me_before.tv_nsec,
 me_after.tv_sec, me_after.tv_nsec, diff);

  return 0;
  }

This is due to us using p->se.sum_exec_runtime in
thread_group_cputime() where we iterate the thread group and sum all
data. This does not take time since the last schedule operation (tick
or otherwise) into account. We can cure this by using
task_sched_runtime() at the cost of having to take locks.

This also means we can (and must) do away with
thread_group_sched_runtime() since the modified thread_group_cputime()
is now more accurate and would deadlock when called from
thread_group_sched_runtime().

Aside of that it makes the function safe on 32 bit systems. The old
code added t->se.sum_exec_runtime unprotected. sum_exec_runtime is a
64bit value and could be changed on another cpu at the same time.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1314874459.7945.22.camel@twins
Tested-by: David Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
10 years agoALSA: hda - Fix a regression of the position-buffer check
Takashi Iwai [Fri, 30 Sep 2011 06:52:26 +0000 (08:52 +0200)]
ALSA: hda - Fix a regression of the position-buffer check

The commit a810364a0424c297242c6c66071a42f7675a5568
    ALSA: hda - Handle -1 as invalid position, too
caused a regression on some machines that require the position-buffer
instead of LPIB, e.g. resulting in noises with mic recording with
PulseAudio.

This patch fixes the detection by delaying the test at the timing as
same as 3.0, i.e. doing the position check only when requested in
azx_position_ok().

Reported-and-tested-by: Rocko Requin <rockorequin@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoResource: fix wrong resource window calculation
Ram Pai [Thu, 22 Sep 2011 07:48:58 +0000 (15:48 +0800)]
Resource: fix wrong resource window calculation

__find_resource() incorrectly returns a resource window which overlaps
an existing allocated window.  This happens when the parent's
resource-window spans 0x00000000 to 0xffffffff and is entirely allocated
to all its children resource-windows.

__find_resource() looks for gaps in resource allocation among the
children resource windows.  When it encounters the last child window it
blindly tries the range next to one allocated to the last child.  Since
the last child's window ends at 0xffffffff the calculation overflows,
leading the algorithm to believe that any window in the range 0x0000000
to 0xfffffff is available for allocation.  This leads to a conflicting
window allocation.

Michal Ludvig reported this issue seen on his platform.  The following
patch fixes the problem and has been verified by Michal.  I believe this
bug has been there for ages.  It got exposed by git commit 2bbc6942273b
("PCI : ability to relocate assigned pci-resources")

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Tested-by: Michal Ludvig <mludvig@logix.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'for-linus' of git://github.com/NewDreamNetwork/ceph-client
Linus Torvalds [Fri, 30 Sep 2011 02:58:58 +0000 (19:58 -0700)]
Merge branch 'for-linus' of git://github.com/NewDreamNetwork/ceph-client

* 'for-linus' of git://github.com/NewDreamNetwork/ceph-client:
  libceph: fix pg_temp mapping update
  libceph: fix pg_temp mapping calculation
  libceph: fix linger request requeuing
  libceph: fix parse options memory leak
  libceph: initialize ack_stamp to avoid unnecessary connection reset

10 years agoMerge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus
Linus Torvalds [Fri, 30 Sep 2011 02:29:45 +0000 (19:29 -0700)]
Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus

* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus:
  [media] omap3isp: Fix build error in ispccdc.c
  [media] uvcvideo: Fix crash when linking entities
  [media] v4l: Make sure we hold a reference to the v4l2_device before using it
  [media] v4l: Fix use-after-free case in v4l2_device_release
  [media] uvcvideo: Set alternate setting 0 on resume if the bus has been reset
  [media] OMAP_VOUT: Fix build break caused by update_mode removal in DSS2

10 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 30 Sep 2011 02:28:26 +0000 (19:28 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: fix cio_tpi ignoring adapter interrupts
  [S390] gmap: always up mmap_sem properly
  [S390] Do not clobber personality flags on exec

10 years agoMerge git://github.com/davem330/sparc
Linus Torvalds [Fri, 30 Sep 2011 02:24:33 +0000 (19:24 -0700)]
Merge git://github.com/davem330/sparc

* git://github.com/davem330/sparc:
  sparc64: Force the execute bit in OpenFirmware's translation entries.
  sparc: Make '-p' boot option meaningful again.
  sparc, exec: remove redundant addr_limit assignment
  sparc64: Future proof Niagara cpu detection.

10 years agoMerge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux
Linus Torvalds [Fri, 30 Sep 2011 02:23:30 +0000 (19:23 -0700)]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux

* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux:
  drm/i915: FBC off for ironlake and older, otherwise on by default
  drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI
  drm/i915: Enable dither whenever display bpc < frame buffer bpc

10 years agopowerpc: Fix device-tree matching for Apple U4 bridge
Benjamin Herrenschmidt [Thu, 29 Sep 2011 05:57:01 +0000 (15:57 +1000)]
powerpc: Fix device-tree matching for Apple U4 bridge

Apple Quad G5 has some oddity in it's device-tree which causes the new
generic matching code to fail to relate nodes for PCI-E devices below U4
with their respective struct pci_dev.  This breaks graphics on those
machines among others.

This fixes it using a quirk which copies the node pointer from the host
bridge for the root complex, which makes the generic code work for the
children afterward.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agobootup: move 'usermodehelper_enable()' a little earlier
wangyanqing [Thu, 29 Sep 2011 07:09:40 +0000 (15:09 +0800)]
bootup: move 'usermodehelper_enable()' a little earlier

Commit d5767c53535a ("bootup: move 'usermodehelper_enable()' to the end
of do_basic_setup()") moved 'usermodehelper_enable()' to end of
do_basic_setup() to after the initcalls.  But then I get failed to let
uvesafb work on my computer, and lose the splash boot.

So maybe we could start usermodehelper_enable a little early to make
some task work that need eary init with the help of user mode.

[ I would *really* prefer that initcalls not call into user space - even
  the real 'init' hasn't been execve'd yet, after all! But for uvesafb
  it really does look like we don't have much choice.

  I considered doing this when we mount the root filesystem, but
  depending on config options that is in multiple places.  We could do
  the usermode helper enable as a rootfs_initcall()..

  So I'm just using wang yanqing's trivial patch.  It's not wonderful,
  but it's simple and should work.  We should revisit this some day,
  though.      - Linus ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoperf tools: Fix raw sample reading
Jiri Olsa [Thu, 29 Sep 2011 15:05:08 +0000 (17:05 +0200)]
perf tools: Fix raw sample reading

Wrong pointer is being passed for raw data sanity checking, when parsing
sample event.

This ends up with invalid event and perf record being stuck in
__perf_session__process_events function during processing build IDs
(process_buildids function).

Following command hangs up in my setup:
./perf record -e raw_syscalls:sys_enter ls

The fix is to use proper pointer to the raw data instead of the 'u'
union.

Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1317308709-9474-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agosparc64: Force the execute bit in OpenFirmware's translation entries.
David S. Miller [Thu, 29 Sep 2011 19:18:59 +0000 (12:18 -0700)]
sparc64: Force the execute bit in OpenFirmware's translation entries.

In the OF 'translations' property, the template TTEs in the mappings
never specify the executable bit.  This is the case even though some
of these mappings are for OF's code segment.

Therefore, we need to force the execute bit on in every mapping.

This problem can only really trigger on Niagara/sun4v machines and the
history behind this is a little complicated.

Previous to sun4v, the sun4u TTE entries lacked a hardware execute
permission bit.  So OF didn't have to ever worry about setting
anything to handle executable pages.  Any valid TTE loaded into the
I-TLB would be respected by the chip.

But sun4v Niagara chips have a real hardware enforced executable bit
in their TTEs.  So it has to be set or else the I-TLB throws an
instruction access exception with type code 6 (protection violation).

We've been extremely fortunate to not get bitten by this in the past.

The best I can tell is that the OF's mappings for it's executable code
were mapped using permanent locked mappings on sun4v in the past.
Therefore, the fact that we didn't have the exec bit set in the OF
translations we would use did not matter in practice.

Thanks to Greg Onufer for helping me track this down.

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobootup: move 'usermodehelper_enable()' to the end of do_basic_setup()
Linus Torvalds [Wed, 28 Sep 2011 17:23:44 +0000 (10:23 -0700)]
bootup: move 'usermodehelper_enable()' to the end of do_basic_setup()

Doing it just before starting to call into cpu_idle() made a sick kind
of sense only because the original bug we fixed (see commit
288d5abec831: "Boot up with usermodehelper disabled") was about problems
with some scheduler data structures not being initialized, and they had
better be initialized at that point.

But it really didn't make any other conceptual sense, and doing it after
the initial "schedule()" call for the idle thread actually opened up a
race: what if the main initialization thread did everything without
needing to sleep, and got all the way into user land too? Without
actually having scheduled back to the idle thread?

Now, in normal circumstances that doesn't ever happen, but it looks like
Richard Cochran triggered exactly that on his ARM IXP4xx machines:

  "I have some ARM IXP4xx based machines that use the two on chip MAC
   ports (aka NPEs).  The NPE needs a firmware in order to function.
   Ever since the following commit [that 288d5abec831 one], it is no
   longer possible to bring up the interfaces during the init scripts."

with a call trace showing an ioctl coming from user space. Richard says:

  "The init is busybox, and the startup script does mount, syslogd, and
   then ifup, so that all can go by quickly."

The fix is to move the usermodehelper_enable() into the main 'init'
thread, and just put it after we've done all our initcalls.  By then,
everything really should be up, but we've obviously not actually started
the user-mode portion of init yet.

Reported-and-tested-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agolibceph: fix pg_temp mapping update
Sage Weil [Wed, 28 Sep 2011 17:11:04 +0000 (10:11 -0700)]
libceph: fix pg_temp mapping update

The incremental map updates have a record for each pg_temp mapping that is
to be add/updated (len > 0) or removed (len == 0).  The old code was
written as if the updates were a complete enumeration; that was just wrong.
Update the code to remove 0-length entries and drop the rbtree traversal.

This avoids misdirected (and hung) requests that manifest as server
errors like

[WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11

Signed-off-by: Sage Weil <sage@newdream.net>
10 years agolibceph: fix pg_temp mapping calculation
Sage Weil [Wed, 28 Sep 2011 17:08:27 +0000 (10:08 -0700)]
libceph: fix pg_temp mapping calculation

We need to apply the modulo pg_num calculation before looking up a pgid in
the pg_temp mapping rbtree.  This fixes pg_temp mappings, and fixes
(some) misdirected requests that result in messages like

[WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11

on the server and stall make the client block without getting a reply (at
least until the pg_temp mapping goes way, but that can take a long long
time).

Reorder calc_pg_raw() a bit to make more sense.

Signed-off-by: Sage Weil <sage@newdream.net>
10 years agoMerge git://github.com/davem330/net
Linus Torvalds [Wed, 28 Sep 2011 15:39:05 +0000 (08:39 -0700)]
Merge git://github.com/davem330/net

* git://github.com/davem330/net:
  ipv6-multicast: Fix memory leak in IPv6 multicast.
  ipv6: check return value for dst_alloc
  net: check return value for dst_alloc
  ipv6-multicast: Fix memory leak in input path.
  bnx2x: add missing break in bnx2x_dcbnl_get_cap
  bnx2x: fix WOL by enablement PME in config space
  bnx2x: fix hw attention handling
  net: fix a typo in Documentation/networking/scaling.txt
  ath9k: Fix a dma warning/memory leak
  rtlwifi: rtl8192cu: Fix unitialized struct
  iwlagn: fix dangling scan request
  batman-adv: do_bcast has to be true for broadcast packets only
  cfg80211: Fix validation of AKM suites
  iwlegacy: do not use interruptible waits
  iwlegacy: fix command queue timeout
  ath9k_hw: Fix Rx DMA stuck for AR9003 chips

10 years agoMerge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6
Linus Torvalds [Wed, 28 Sep 2011 15:23:39 +0000 (08:23 -0700)]
Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6

* git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6:
  [SCSI] 3w-9xxx: fix iommu_iova leak
  [SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference
  [SCSI] scsi: qla4xxx needs libiscsi.o
  [SCSI] libsas: fix failure to revalidate domain for anything but the first expander child.
  [SCSI] aacraid: reset should disable MSI interrupt

10 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Wed, 28 Sep 2011 15:03:00 +0000 (08:03 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Free queue resources at blk_release_queue()

10 years agoMerge branch 'writeback-for-linus' of git://github.com/fengguang/linux
Linus Torvalds [Wed, 28 Sep 2011 15:01:05 +0000 (08:01 -0700)]
Merge branch 'writeback-for-linus' of git://github.com/fengguang/linux

* 'writeback-for-linus' of git://github.com/fengguang/linux:
  writeback: show raw dirtied_when in trace writeback_single_inode

10 years agoblock: Free queue resources at blk_release_queue()
Hannes Reinecke [Wed, 28 Sep 2011 14:07:01 +0000 (08:07 -0600)]
block: Free queue resources at blk_release_queue()

A kernel crash is observed when a mounted ext3/ext4 filesystem is
physically removed. The problem is that blk_cleanup_queue() frees up
some resources eg by calling elevator_exit(), which are not checked for
in normal operation. So we should rather move these calls to the
destructor function blk_release_queue() as at that point all remaining
references are gone. However, in doing so we have to ensure that any
externally supplied queue_lock is disconnected as the driver might free
up the lock after the call of blk_cleanup_queue(),

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
10 years agoMerge branch 'for-davem' of git://git.infradead.org/users/linville/wireless
David S. Miller [Wed, 28 Sep 2011 02:42:30 +0000 (22:42 -0400)]
Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless

10 years agoLinux 3.1-rc8 v3.1-rc8
Linus Torvalds [Tue, 27 Sep 2011 22:48:34 +0000 (15:48 -0700)]
Linux 3.1-rc8

10 years agoMerge branch 'for-linus' of git://github.com/tiwai/sound
Linus Torvalds [Tue, 27 Sep 2011 22:46:21 +0000 (15:46 -0700)]
Merge branch 'for-linus' of git://github.com/tiwai/sound

* 'for-linus' of git://github.com/tiwai/sound:
  ASoC: ssm2602: Re-enable oscillator after suspend
  ALSA: usb-audio: Check for possible chip NULL pointer before clearing probing flag
  ALSA: hda/realtek - Don't detect LO jack when identical with HP
  ALSA: hda/realtek - Avoid bogus HP-pin assignment
  ALSA: HDA: No power nids on 92HD93
  ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active

10 years agoMerge branch 'pm-fixes' of git://github.com/rjwysocki/linux-pm
Linus Torvalds [Tue, 27 Sep 2011 22:41:32 +0000 (15:41 -0700)]
Merge branch 'pm-fixes' of git://github.com/rjwysocki/linux-pm

* 'pm-fixes' of git://github.com/rjwysocki/linux-pm:
  PM / Clocks: Do not acquire a mutex under a spinlock

10 years agoMerge branch 'master' of git://git.infradead.org/users/linville/wireless into for...
John W. Linville [Tue, 27 Sep 2011 19:47:33 +0000 (15:47 -0400)]
Merge branch 'master' of git://git.infradead.org/users/linville/wireless into for-davem

10 years agoipv6-multicast: Fix memory leak in IPv6 multicast.
Ben Greear [Fri, 23 Sep 2011 13:11:01 +0000 (13:11 +0000)]
ipv6-multicast: Fix memory leak in IPv6 multicast.

If reg_vif_xmit cannot find a routing entry, be sure to
free the skb before returning the error.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoipv6: check return value for dst_alloc
Madalin Bucur [Mon, 26 Sep 2011 07:04:56 +0000 (07:04 +0000)]
ipv6: check return value for dst_alloc

return value of dst_alloc must be checked before use

Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: check return value for dst_alloc
Madalin Bucur [Mon, 26 Sep 2011 07:04:36 +0000 (07:04 +0000)]
net: check return value for dst_alloc

return value of dst_alloc must be checked before use

Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoipv6-multicast: Fix memory leak in input path.
Ben Greear [Tue, 27 Sep 2011 19:16:08 +0000 (15:16 -0400)]
ipv6-multicast: Fix memory leak in input path.

Have to free the skb before returning if we fail
the fib lookup.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge
David S. Miller [Tue, 27 Sep 2011 19:05:47 +0000 (15:05 -0400)]
Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge

10 years agobnx2x: add missing break in bnx2x_dcbnl_get_cap
Shmulik Ravid [Thu, 22 Sep 2011 02:33:33 +0000 (02:33 +0000)]
bnx2x: add missing break in bnx2x_dcbnl_get_cap

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobnx2x: fix WOL by enablement PME in config space
Dmitry Kravkov [Thu, 22 Sep 2011 02:33:32 +0000 (02:33 +0000)]
bnx2x: fix WOL by enablement PME in config space

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobnx2x: fix hw attention handling
Dmitry Kravkov [Thu, 22 Sep 2011 02:33:31 +0000 (02:33 +0000)]
bnx2x: fix hw attention handling

Use register name to initialize attention mask

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: fix a typo in Documentation/networking/scaling.txt
Jason Wang [Tue, 27 Sep 2011 17:26:27 +0000 (13:26 -0400)]
net: fix a typo in Documentation/networking/scaling.txt

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Tue, 27 Sep 2011 16:21:41 +0000 (18:21 +0200)]
Merge branch 'fix/asoc' into for-linus

10 years agovfs: remove LOOKUP_NO_AUTOMOUNT flag
Linus Torvalds [Tue, 27 Sep 2011 15:12:33 +0000 (08:12 -0700)]
vfs: remove LOOKUP_NO_AUTOMOUNT flag

That flag no longer makes sense, since we don't look up automount points
as eagerly any more.  Additionally, it turns out that the NO_AUTOMOUNT
handling was buggy to begin with: it would avoid automounting even for
cases where we really *needed* to do the automount handling, and could
return ENOENT for autofs entries that hadn't been instantiated yet.

With our new non-eager automount semantics, one discussion has been
about adding a AT_AUTOMOUNT flag to vfs_fstatat (and thus the
newfstatat() and fstatat64() system calls), but it's probably not worth
it: you can always force at least directory automounting by simply
adding the final '/' to the filename, which works for *all* of the stat
family system calls, old and new.

So AT_NO_AUTOMOUNT (and thus LOOKUP_NO_AUTOMOUNT) really were just a
result of our bad default behavior.

Acked-by: Ian Kent <raven@themaw.net>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoASoC: ssm2602: Re-enable oscillator after suspend
Lars-Peter Clausen [Tue, 27 Sep 2011 09:08:46 +0000 (11:08 +0200)]
ASoC: ssm2602: Re-enable oscillator after suspend

Currently the the internal oscillator is powered down when entering BIAS_OFF
state, but not re-enabled when going back to BIAS_STANDBY. As a result the
CODEC will stop working after suspend if the internal oscillator is used to
generate the sysclock signal. This patch fixes it by clearing the appropriate
bit in the power down register when the CODEC is re-enabled.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
10 years agoVFS: Fix the remaining automounter semantics regressions
Trond Myklebust [Tue, 27 Sep 2011 00:36:09 +0000 (20:36 -0400)]
VFS: Fix the remaining automounter semantics regressions

The concensus seems to be that system calls such as stat() etc should
not trigger an automount.  Neither should the l* versions.

This patch therefore adds a LOOKUP_AUTOMOUNT flag to tag those lookups
that _should_ trigger an automount on the last path element.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ Edited to leave out the cases that are already covered by LOOKUP_OPEN,
  LOOKUP_DIRECTORY and LOOKUP_CREATE - all of which also fundamentally
  force automounting for their own reasons   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agovfs pathname lookup: Add LOOKUP_AUTOMOUNT flag
Linus Torvalds [Tue, 27 Sep 2011 00:44:55 +0000 (17:44 -0700)]
vfs pathname lookup: Add LOOKUP_AUTOMOUNT flag

Since we've now turned around and made LOOKUP_FOLLOW *not* force an
automount, we want to add the ability to force an automount event on
lookup even if we don't happen to have one of the other flags that force
it implicitly (LOOKUP_OPEN, LOOKUP_DIRECTORY, LOOKUP_PARENT..)

Most cases will never want to use this, since you'd normally want to
delay automounting as long as possible, which usually implies
LOOKUP_OPEN (when we open a file or directory, we really cannot avoid
the automount any more).

But Trond argued sufficiently forcefully that at a minimum bind mounting
a file and quotactl will want to force the automount lookup.  Some other
cases (like nfs_follow_remote_path()) could use it too, although
LOOKUP_DIRECTORY would work there as well.

This commit just adds the flag and logic, no users yet, though.  It also
doesn't actually touch the LOOKUP_NO_AUTOMOUNT flag that is related, and
was made irrelevant by the same change that made us not follow on
LOOKUP_FOLLOW.

Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsung
Linus Torvalds [Mon, 26 Sep 2011 23:29:26 +0000 (16:29 -0700)]
Merge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsung

* 'samsung-fixes-3' of git://github.com/kgene/linux-samsung:
  ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver
  ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver
  ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt
  ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv

10 years agoARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver
Sylwester Nawrocki [Mon, 26 Sep 2011 22:00:59 +0000 (07:00 +0900)]
ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
10 years agoARM: S5PV210: Rename sclk_cam clocks for FIMC media driver
Sylwester Nawrocki [Mon, 26 Sep 2011 22:00:53 +0000 (07:00 +0900)]
ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
10 years agoMerge branch 'hwmon-for-linus' of git://github.com/groeck/linux
Linus Torvalds [Mon, 26 Sep 2011 20:35:43 +0000 (13:35 -0700)]
Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux

* 'hwmon-for-linus' of git://github.com/groeck/linux:
  hwmon: (coretemp) remove struct platform_data * parameter from create_core_data()
  hwmon: (coretemp) constify static data
  hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID
  hwmon: (ds620) Fix handling of negative temperatures
  hwmon: (w83791d) rename prototype parameter from 'register' to 'reg'
  hwmon: (coretemp) Don't use threshold registers for tempX_max
  hwmon: (coretemp) Let the user force TjMax
  hwmon: (coretemp) Drop duplicate function get_pkg_tjmax

10 years agoMerge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvm
Linus Torvalds [Mon, 26 Sep 2011 20:33:44 +0000 (13:33 -0700)]
Merge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvm

* 'kvm-updates/3.1' of git://github.com/avikivity/kvm:
  KVM: x86 emulator: fix Src2CL decode
  KVM: MMU: fix incorrect return of spte

10 years agoMerge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur...
Linus Torvalds [Mon, 26 Sep 2011 20:26:30 +0000 (13:26 -0700)]
Merge branch 'fixes' of ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op
  ARM: dma-mapping: free allocated page if unable to map
  ARM: fix vmlinux.lds.S discarding sections
  ARM: nommu: fix warning with checksyscalls.sh
  ARM: 7091/1: errata: D-cache line maintenance operation by MVA may not succeed

10 years agoath9k: Fix a dma warning/memory leak
Mohammed Shafi Shajakhan [Fri, 23 Sep 2011 09:03:14 +0000 (14:33 +0530)]
ath9k: Fix a dma warning/memory leak

proper dma_unmapping and freeing of skb's has to be done in the rx
cleanup for EDMA chipsets when the device is unloaded and this also
seems to address the following warning which shows up occasionally when
the device is unloaded

Call Trace:
[<c0148cd2>] warn_slowpath_common+0x72/0xa0
[<c03b669c>] ? dma_debug_device_change+0x19c/0x200
[<c03b669c>] ? dma_debug_device_change+0x19c/0x200
[<c0148da3>] warn_slowpath_fmt+0x33/0x40
[<c03b669c>] dma_debug_device_change+0x19c/0x200
[<c0657f12>] notifier_call_chain+0x82/0xb0
[<c0171370>] __blocking_notifier_call_chain+0x60/0x90
[<c01713bf>] blocking_notifier_call_chain+0x1f/0x30
[<c044f594>] __device_release_driver+0xa4/0xc0
[<c044f647>] driver_detach+0x97/0xa0
[<c044e65c>] bus_remove_driver+0x6c/0xe0
[<c029af0b>] ? sysfs_addrm_finish+0x4b/0x60
[<c0450109>] driver_unregister+0x49/0x80
[<c0299f54>] ? sysfs_remove_file+0x14/0x20
[<c03c3ab2>] pci_unregister_driver+0x32/0x80
[<f92c2162>] ath_pci_exit+0x12/0x20 [ath9k]
[<f92c8467>] ath9k_exit+0x17/0x36 [ath9k]
[<c06523cd>] ? mutex_unlock+0xd/0x10
[<c018e27f>] sys_delete_module+0x13f/0x200
[<c02139bb>] ? sys_munmap+0x4b/0x60
[<c06547c5>] ? restore_all+0xf/0xf
[<c0657a20>] ? spurious_fault+0xe0/0xe0
[<c01832f4>] ? trace_hardirqs_on_caller+0xf4/0x180
[<c065b863>] sysenter_do_call+0x12/0x38
 ---[ end trace 16e1c1521c06bcf9 ]---
Mapped at:
[<c03b7938>] debug_dma_map_page+0x48/0x120
[<f92ba3e8>] ath_rx_init+0x3f8/0x4b0 [ath9k]
[<f92b5ae4>] ath9k_init_device+0x4c4/0x7b0 [ath9k]
[<f92c2813>] ath_pci_probe+0x263/0x330 [ath9k]

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agortlwifi: rtl8192cu: Fix unitialized struct
Larry Finger [Fri, 23 Sep 2011 03:59:02 +0000 (22:59 -0500)]
rtlwifi: rtl8192cu: Fix unitialized struct

Driver rtl8192cu assigns a new struct rtl_tcb_desc object, but fails to
clear it.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [2.6.39+]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agoiwlagn: fix dangling scan request
Johannes Berg [Thu, 22 Sep 2011 21:59:04 +0000 (14:59 -0700)]
iwlagn: fix dangling scan request

If iwl_scan_initiate() fails for any reason,
priv->scan_request and priv->scan_vif are left
dangling. This can lead to a crash later when
iwl_bg_scan_completed() tries to run a pending
scan request.

In practice, this seems to be very rare due to
the STATUS_SCANNING check earlier. That check,
however, is wrong -- it should allow a scan to
be queued when a reset/roc scan is going on.
When a normal scan is already going on, a new
one can't be issued by mac80211, so that code
can be removed completely. I introduced this
bug when adding off-channel support in commit
266af4c745952e9bebf687dd68af58df553cb59d.

Cc: stable@kernel.org [3.0]
Reported-by: Peng Yan <peng.yan@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agoPM / Clocks: Do not acquire a mutex under a spinlock
Rafael J. Wysocki [Mon, 26 Sep 2011 17:40:23 +0000 (19:40 +0200)]
PM / Clocks: Do not acquire a mutex under a spinlock

Commit b7ab83e (PM: Use spinlock instead of mutex in clock
management functions) introduced a regression causing clocks_mutex
to be acquired under a spinlock.  This happens because
pm_clk_suspend() and pm_clk_resume() call pm_clk_acquire() under
pcd->lock, but pm_clk_acquire() executes clk_get() which causes
clocks_mutex to be acquired.  Similarly, __pm_clk_remove(),
executed under pcd->lock, calls clk_put(), which also causes
clocks_mutex to be acquired.

To fix those problems make pm_clk_add() call pm_clk_acquire(), so
that pm_clk_suspend() and pm_clk_resume() don't have to do that.
Change pm_clk_remove() and pm_clk_destroy() to separate
modifications of the pcd->clock_list list from the actual removal of
PM clock entry objects done by __pm_clk_remove().

Reported-and-tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years ago[S390] cio: fix cio_tpi ignoring adapter interrupts
Peter Oberparleiter [Mon, 26 Sep 2011 14:40:35 +0000 (16:40 +0200)]
[S390] cio: fix cio_tpi ignoring adapter interrupts

Ensure that adapter interrupts are correctly processed when they are
retrieved using TEST PENDING INTERRUPTION.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
10 years ago[S390] gmap: always up mmap_sem properly
Carsten Otte [Mon, 26 Sep 2011 14:40:34 +0000 (16:40 +0200)]
[S390] gmap: always up mmap_sem properly

If gmap_unmap_segment figures that the segment was not mapped in the
first place, it need to up mmap_sem on exit.

Cc: <stable@kernel.org>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
10 years ago[S390] Do not clobber personality flags on exec
Martin Schwidefsky [Mon, 26 Sep 2011 14:40:33 +0000 (16:40 +0200)]
[S390] Do not clobber personality flags on exec

Analog to git commit 59e4c3a2fe9cb1681bb2cff508ff79466f7585ba
do not clear the additional personality flags on exec. We
need to inherit the personality bits in PER_MASK across exec.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
10 years ago[SCSI] 3w-9xxx: fix iommu_iova leak
James Bottomley [Sun, 18 Sep 2011 14:56:20 +0000 (18:56 +0400)]
[SCSI] 3w-9xxx: fix iommu_iova leak

Following reports on the list, it looks like the 3e-9xxx driver will leak dma
mappings every time we get a transient queueing error back from the card.
This is because it maps the sg list in the routine that sends the command, but
doesn't unmap again in the transient failure path (even though the command is
sent back to the block layer).  Fix by unmapping before returning the status.

Reported-by: Chris Boot <bootc@bootc.net>
Tested-by: Chris Boot <bootc@bootc.net>
Acked-by: Adam Radford <aradford@gmail.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
10 years ago[SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference
Neil Horman [Tue, 6 Sep 2011 17:59:13 +0000 (13:59 -0400)]
[SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference

This oops was reported recently:
d:mon> e
cpu 0xd: Vector: 300 (Data Access) at [c0000000fd4c7120]
    pc: d00000000076f194: .t3_l2t_get+0x44/0x524 [cxgb3]
    lr: d000000000b02108: .init_act_open+0x150/0x3d4 [cxgb3i]
    sp: c0000000fd4c73a0
   msr: 8000000000009032
   dar: 0
 dsisr: 40000000
  current = 0xc0000000fd640d40
  paca    = 0xc00000000054ff80
    pid   = 5085, comm = iscsid
d:mon> t
[c0000000fd4c7450d000000000b02108 .init_act_open+0x150/0x3d4 [cxgb3i]
[c0000000fd4c7500d000000000e45378 .cxgbi_ep_connect+0x784/0x8e8 [libcxgbi]
[c0000000fd4c7650d000000000db33f0 .iscsi_if_rx+0x71c/0xb18
[scsi_transport_iscsi2]
[c0000000fd4c7740c000000000370c9c .netlink_data_ready+0x40/0xa4
[c0000000fd4c77c0c00000000036f010 .netlink_sendskb+0x4c/0x9c
[c0000000fd4c7850c000000000370c18 .netlink_sendmsg+0x358/0x39c
[c0000000fd4c7950c00000000033be24 .sock_sendmsg+0x114/0x1b8
[c0000000fd4c7b50c00000000033d208 .sys_sendmsg+0x218/0x2ac
[c0000000fd4c7d70c00000000033f55c .sys_socketcall+0x228/0x27c
[c0000000fd4c7e30c0000000000086a4 syscall_exit+0x0/0x40
--- Exception: c01 (System Call) at 00000080da560cfc

The root cause was an EEH error, which sent us down the offload_close path in
the cxgb3 driver, which in turn sets cdev->l2opt to NULL, without regard for
upper layer driver (like the cxgbi drivers) which might have execution contexts
in the middle of its use. The result is the oops above, when t3_l2t_get attempts
to dereference L2DATA(cdev)->nentries in arp_hash right after the EEH error handler sets it to NULL.

The fix is to prevent the setting of the NULL pointer until after there are no
further users of it.  The t3cdev->l2opt pointer is now converted to be an rcu
pointer and the L2DATA macro is now called under the protection of the
rcu_read_lock().  When the EEH error path:
t3_adapter_error->offload_close->cxgb3_offload_deactivate
Is exectured, setting of that l2opt pointer to NULL, is now gated on an rcu
quiescence point, preventing, allowing L2DATA callers to safely check for a NULL
pointer without concern that the underlying data will be freeded before the
pointer is dereferenced.

This has been tested by the reporter and shown to fix the reproted oops

[nhorman: fix up unitinialised variable reported by Dan Carpenter]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Karen Xie <kxie@chelsio.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
10 years agoALSA: usb-audio: Check for possible chip NULL pointer before clearing probing flag
Thomas Pfaff [Mon, 26 Sep 2011 13:43:59 +0000 (15:43 +0200)]
ALSA: usb-audio: Check for possible chip NULL pointer before clearing probing flag

Before clearing the probing flag in the error exit path, check that the
chip pointer is not NULL.

Signed-off-by: Thomas Pfaff <tpfaff@gmx.net>
Cc: <stable@kernel.org> [2.6.39+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoALSA: hda/realtek - Don't detect LO jack when identical with HP
Takashi Iwai [Mon, 26 Sep 2011 13:19:55 +0000 (15:19 +0200)]
ALSA: hda/realtek - Don't detect LO jack when identical with HP

The spec->autocfg.line_out_pins[] may contain the same pins as hp_pins[]
depending on the configuration.  When they are identical, detecting the
line_jack_present flag screws up the auto-mute because alc_line_automute()
is called unconditionally at initialization while it won't be triggered
by unsol events, thus the old line_jack_present flag is kept for the
whole run.

For fixing this buggy behavior, the driver needs to check whether the
line-outs are really individual, and skip if same as headphone jacks.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104

Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op
Will Deacon [Fri, 23 Sep 2011 13:34:12 +0000 (14:34 +0100)]
ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op

The SMP implementation of __futex_atomic_op clobbers oldval with the
status flag from the exclusive store. This causes it to always read as
zero when performing the FUTEX_OP_CMP_* operation.

This patch updates the ARM __futex_atomic_op implementations to take a
tmp argument, allowing us to store the strex status flag without
overwriting the register containing oldval.

Cc: stable@kernel.org
Reported-by: Minho Ban <mhban@samsung.com>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agosched: Fix up wchan borkage
Simon Kirby [Fri, 23 Sep 2011 00:03:46 +0000 (17:03 -0700)]
sched: Fix up wchan borkage

Commit c259e01a1ec ("sched: Separate the scheduler entry for
preemption") contained a boo-boo wrecking wchan output. It forgot to
put the new schedule() function in the __sched section and thereby
doesn't get properly ignored for things like wchan.

Tested-by: Simon Kirby <sim@hostway.ca>
Cc: stable@kernel.org # 2.6.39+
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110923000346.GA25425@hostway.ca
Signed-off-by: Ingo Molnar <mingo@elte.hu>
10 years agoALSA: hda/realtek - Avoid bogus HP-pin assignment
Takashi Iwai [Mon, 26 Sep 2011 08:41:21 +0000 (10:41 +0200)]
ALSA: hda/realtek - Avoid bogus HP-pin assignment

When the headphone pin is assigned as primary output to line_out_pins[],
the automatic HP-pin assignment by ASSID must be suppressed.  Otherwise
a wrong pin might be assigned to the headphone and breaks the auto-mute.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
10 years agoARM: dma-mapping: free allocated page if unable to map
Russell King [Thu, 22 Sep 2011 09:32:25 +0000 (10:32 +0100)]
ARM: dma-mapping: free allocated page if unable to map

If the attempt to map a page for DMA fails (eg, because we're out of
mapping space) then we must not hold on to the page we allocated for
DMA - doing so will result in a memory leak.

Cc: <stable@kernel.org>
Reported-by: Bryan Phillippe <bp@darkforest.org>
Tested-by: Bryan Phillippe <bp@darkforest.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: S5P: fix incorrect loop iterator usage on gpio-interrupt
Marek Szyprowski [Mon, 26 Sep 2011 04:16:45 +0000 (13:16 +0900)]
ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt

Loop iterator value after terminating list_for_each_entry()
is not NULL. This patch fixes incorrect iterator usage in
GPIO interrupt code for SAMSUNG S5P platforms.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
10 years agoARM: S3C2443: Fix bit-reset in setrate of clk_armdiv
Heiko Stuebner [Mon, 26 Sep 2011 01:30:29 +0000 (10:30 +0900)]
ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv

The changed statement should set the old armdiv bits to 0
and not everything else, before setting the new value.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
10 years agoptrace: PTRACE_LISTEN forgets to unlock ->siglock
Oleg Nesterov [Sun, 25 Sep 2011 17:46:22 +0000 (19:46 +0200)]
ptrace: PTRACE_LISTEN forgets to unlock ->siglock

If PTRACE_LISTEN fails after lock_task_sighand() it doesn't drop ->siglock.

Reported-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoKVM: x86 emulator: fix Src2CL decode
Avi Kivity [Tue, 13 Sep 2011 07:45:38 +0000 (10:45 +0300)]
KVM: x86 emulator: fix Src2CL decode

Src2CL decode (used for double width shifts) erronously decodes only bit 3
of %rcx, instead of bits 7:0.

Fix by decoding %cl in its entirety.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
10 years agoKVM: MMU: fix incorrect return of spte
Zhao Jin [Mon, 19 Sep 2011 04:19:51 +0000 (12:19 +0800)]
KVM: MMU: fix incorrect return of spte

__update_clear_spte_slow should return original spte while the
current code returns low half of original spte combined with high
half of new spte.

Signed-off-by: Zhao Jin <cronozhj@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
10 years agoALSA: HDA: No power nids on 92HD93
David Henningsson [Sat, 24 Sep 2011 06:30:44 +0000 (08:30 +0200)]
ALSA: HDA: No power nids on 92HD93

This patch is necessary to make internal speakers work on this chip.

Cc: stable@kernel.org
BugLink: http://bugs.launchpad.net/bugs/854468
Tested-by: Alex Wolfson <alex.wolfson@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoMerge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Fri, 23 Sep 2011 23:53:16 +0000 (16:53 -0700)]
Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi: Fix WARN when removing spi-fsl-spi module
  spi/imx: Fix spi-imx when the hardware SPI chipselects are used

10 years agospi: Fix WARN when removing spi-fsl-spi module
Jeff Harris [Fri, 23 Sep 2011 15:49:36 +0000 (11:49 -0400)]
spi: Fix WARN when removing spi-fsl-spi module

If CPM mode is not used, the fsl_dummy_rx variable is never allocated.  When
the cleanup attempts to free it, the reference count is zero and a WARN is
generated.  The same CPM mode check used in the initialize is applied to the
free as well.

Tested on 2.6.33 with the previous spi_mpc8xxx driver.  The renamed
spi-fsl-spi driver looks to have the same problem.

Signed-off-by: Jeff Harris <jeff_harris@kentrox.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10 years agoscsi: fix qla2xxx printk format warning
Randy Dunlap [Fri, 23 Sep 2011 22:40:50 +0000 (15:40 -0700)]
scsi: fix qla2xxx printk format warning

sector_t can be different types, so cast it to its largest possible
type.

  drivers/scsi/qla2xxx/qla_isr.c:1509:5: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'sector_t'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoscsi: SCSI_ISCI needs to select SCSI_SAS_HOST_SMP, fixes build error
Randy Dunlap [Fri, 23 Sep 2011 22:43:54 +0000 (15:43 -0700)]
scsi: SCSI_ISCI needs to select SCSI_SAS_HOST_SMP, fixes build error

SCSI_ISCI needs to select SCSI_SAS_HOST_SMP to ensure that all
needed symbols are available to it.

Fixes this build error:

  ERROR: "try_test_sas_gpio_gp_bit" [drivers/scsi/isci/isci.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'perf-tools-for-linus' of git://github.com/acmel/linux
Linus Torvalds [Fri, 23 Sep 2011 22:17:02 +0000 (15:17 -0700)]
Merge branch 'perf-tools-for-linus' of git://github.com/acmel/linux

* 'perf-tools-for-linus' of git://github.com/acmel/linux:
  perf python: Add missing perf_event__parse_sample 'swapped' parm

10 years agoMerge branch 'perf-tools-for-linus' of git://github.com/acmel/linux
Linus Torvalds [Fri, 23 Sep 2011 20:59:37 +0000 (13:59 -0700)]
Merge branch 'perf-tools-for-linus' of git://github.com/acmel/linux

* 'perf-tools-for-linus' of git://github.com/acmel/linux:
  perf tools: Add support for disabling -Werror via WERROR=0
  perf top: Fix userspace sample addr map offset
  perf symbols: Fix issue with binaries using 16-bytes buildids (v2)
  perf tool: Fix endianness handling of u32 data in samples
  perf sort: Fix symbol sort output by separating unresolved samples by type
  perf symbols: Synthesize anonymous mmap events
  perf record: Create events initially disabled and enable after init
  perf symbols: Add some heuristics for choosing the best duplicate symbol
  perf symbols: Preserve symbol scope when parsing /proc/kallsyms
  perf symbols: /proc/kallsyms does not sort module symbols
  perf symbols: Fix ppc64 SEGV in dso__load_sym with debuginfo files
  perf probe: Fix regression of variable finder

10 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 23 Sep 2011 19:05:53 +0000 (12:05 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: fix DDIA enable on some rs690 systems
  Revert "drm/radeon/kms: fix typo in r100_blit_copy"

10 years agoMerge branch 'for-linus' of git://github.com/tiwai/sound
Linus Torvalds [Fri, 23 Sep 2011 19:04:32 +0000 (12:04 -0700)]
Merge branch 'for-linus' of git://github.com/tiwai/sound

* 'for-linus' of git://github.com/tiwai/sound:
  ALSA: usb-audio - clear chip->probing on error exit
  ALSA: fm801: Gracefully handle failure of tuner auto-detect
  ALSA: fm801: Fix double free in case of error in tuner detection
  ASoC: Ensure we generate a driver name
  ASoC: Remove bitrotted wm8962_resume()
  ASoC: bf5xx-ad73311: Fix prototype for bf5xx_probe

10 years agoperf python: Add missing perf_event__parse_sample 'swapped' parm
Arnaldo Carvalho de Melo [Fri, 23 Sep 2011 18:38:53 +0000 (15:38 -0300)]
perf python: Add missing perf_event__parse_sample 'swapped' parm

Problem introduced in 936be50, that missed one perf_event__parse_sample
user, the python binding.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ja4phms9618ggi657plyuch2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agohwmon: (coretemp) remove struct platform_data * parameter from create_core_data()
Jan Beulich [Fri, 23 Sep 2011 10:40:08 +0000 (06:40 -0400)]
hwmon: (coretemp) remove struct platform_data * parameter from create_core_data()

The only caller of the function obtained the pointer solely for the
purpose of passing it to this function, while it can be easily
determined from the struct platform_device * parameter also passed.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
10 years agohwmon: (coretemp) constify static data
Jan Beulich [Fri, 23 Sep 2011 10:36:53 +0000 (06:36 -0400)]
hwmon: (coretemp) constify static data

These arrays won't ever be written to, so protect them from
unintentional modification.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
10 years agohwmon: (coretemp) don't use kernel assigned CPU number as platform device ID
Jan Beulich [Fri, 23 Sep 2011 10:35:00 +0000 (06:35 -0400)]
hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID

... as that has the potential to conflict with (particularly soft) CPU
hot removal and re-adding.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
[guenter.roeck@ericsson.com: use platform device ID as physical CPU id]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
10 years agoperf tools: Add support for disabling -Werror via WERROR=0
Darren Hart [Thu, 8 Sep 2011 20:42:39 +0000 (13:42 -0700)]
perf tools: Add support for disabling -Werror via WERROR=0

GCC often introduces new warnings with lots of false positives -
breaking -Werror builds. WERROR=0 allows one to build perf without much
fuss - while still encouraging people to send patches to avoid the fuss
of having to type WERROR=0.

Bisecting back to commits that produce a (mostly harmless) warning on
some compilers is more difficult. With WERROR=0 one could bisect without
worrying about harmless warnings.

Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/eac06c7cc4920e5d4830417d466161fb26c7359c.1315514559.git.dvhart@linux.intel.com
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf top: Fix userspace sample addr map offset
Arnaldo Carvalho de Melo [Wed, 14 Sep 2011 18:54:30 +0000 (15:54 -0300)]
perf top: Fix userspace sample addr map offset

The 'perf top' tool came from the kernel where we had each DSO (vmlinux,
modules) loaded just once at a time.

But userspace may have DSOs loaded in multiple addresses (shared
libraries), requiring that we use the just resolved map instead of the
first one found.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ag53wz0yllpgers0n2w7hchp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Fix issue with binaries using 16-bytes buildids (v2)
Stephane Eranian [Fri, 22 Oct 2010 15:25:01 +0000 (17:25 +0200)]
perf symbols: Fix issue with binaries using 16-bytes buildids (v2)

Buildid can vary in size. According to the man page of ld, buildid can
be 160 bits (sha1) or 128 bits (md5, uuid). Perf assumes buildid size of
20 bytes (160 bits) regardless. When dealing with md5 buildids, it would
thus read more than needed and that would cause mismatches and samples
without symbols.

This patch fixes this by taking into account the actual buildid size as
encoded int he section header. The leftover bytes are also cleared.

This second version fixes a minor issue with the memset() base position.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/4cc1af3c.8ee7d80a.5a28.ffff868e@mx.google.com
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tool: Fix endianness handling of u32 data in samples
David Ahern [Tue, 6 Sep 2011 15:12:26 +0000 (09:12 -0600)]
perf tool: Fix endianness handling of u32 data in samples

Currently, analyzing PPC data files on x86 the cpu field is always 0 and
the tid and pid are backwards. For example, analyzing a PPC file on PPC
the pid/tid fields show:

        rsyslogd  1210/1212

and analyzing the same PPC file using an x86 perf binary shows:

        rsyslogd  1212/1210

The problem is that the swap_op method for samples is
perf_event__all64_swap which assumes all elements in the sample_data
struct are u64s. cpu, tid and pid are u32s and need to be handled
individually. Given that the swap is done before the sample is parsed,
the simplest solution is to undo the 64-bit swap of those elements when
the sample is parsed and do the proper swap.

The RAW data field is generic and perf cannot have programmatic knowledge
of how to treat that data. Instead a warning is given to the user.

Thanks to Anton Blanchard for providing a data file for a mult-CPU
PPC system so I could verify the fix for the CPU fields.

v3 -> v4:
- fixed use of WARN_ONCE

v2 -> v3:
- used WARN_ONCE for message regarding raw data
- removed struct wrapper around union
- fixed whitespace issues

v1 -> v2:
- added a union for undoing the byte-swap on u64 and redoing swap on
  u32's to address compiler errors (see git commit 65014ab3)

Cc: Anton Blanchard <anton@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1315321946-16993-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf sort: Fix symbol sort output by separating unresolved samples by type
Anton Blanchard [Wed, 31 Aug 2011 01:51:45 +0000 (11:51 +1000)]
perf sort: Fix symbol sort output by separating unresolved samples by type

I took a profile that suggested 60% of total CPU time was in the
hypervisor:

...
    60.20%  [H] 0x33d43c
     4.43%  [k] ._spin_lock_irqsave
     1.07%  [k] ._spin_lock

Using perf stat to get the user/kernel/hypervisor breakdown contradicted
this.

The problem is we merge all unresolved samples into the one unknown
bucket. If add a comparison by sample type to sort__sym_cmp we get the
real picture:

...
    57.11%  [.] 0x80fbf63c
     4.43%  [k] ._spin_lock_irqsave
     1.07%  [k] ._spin_lock
     0.65%  [H] 0x33d43c

So it was almost all userspace, not hypervisor as the initial profile
suggested.

I found another issue while adding this. Symbol sorting sometimes shows
multiple entries for the unknown bucket:

...
    16.65%  [.] 0x6cd3a8
     7.25%  [.] 0x422460
     5.37%  [.] yylex
     4.79%  [.] malloc
     4.78%  [.] _int_malloc
     4.03%  [.] _int_free
     3.95%  [.] hash_source_code_string
     2.82%  [.] 0x532908
     2.64%  [.] 0x36b538
     0.94%  [H] 0x8000000000e132a4
     0.82%  [H] 0x800000000000e8b0

This happens because we aren't consistent with our sorting. On
one hand we check to see if both symbols match and for two unresolved
samples sym is NULL so we match:

        if (left->ms.sym == right->ms.sym)
                return 0;

On the other hand we use sample IP for unresolved samples when
comparing against a symbol:

       ip_l = left->ms.sym ? left->ms.sym->start : left->ip;
       ip_r = right->ms.sym ? right->ms.sym->start : right->ip;

This means unresolved samples end up spread across the rbtree and we
can't merge them all.

If we use cmp_null all unresolved samples will end up in the one bucket
and the output makes more sense:

...
    39.12%  [.] 0x36b538
     5.37%  [.] yylex
     4.79%  [.] malloc
     4.78%  [.] _int_malloc
     4.03%  [.] _int_free
     3.95%  [.] hash_source_code_string
     2.26%  [H] 0x800000000000e8b0

Acked-by: Eric B Munson <emunson@mgebm.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Link: http://lkml.kernel.org/r/20110831115145.4f598ab2@kryten
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Synthesize anonymous mmap events
Anton Blanchard [Mon, 29 Aug 2011 23:15:06 +0000 (09:15 +1000)]
perf symbols: Synthesize anonymous mmap events

perf_event__synthesize_mmap_events does not create anonymous mmap events
even though the kernel does. As a result an already running application
with dynamically created code will not get profiled - all samples end up
in the unknown bucket.

This patch skips any entries with '[' in the name to avoid adding events
for special regions (eg the vsyscall page). All other executable mmaps
are assumed to be anonymous and an event is synthesized.

Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Link: http://lkml.kernel.org/r/20110830091506.60b51fe8@kryten
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf record: Create events initially disabled and enable after init
David Ahern [Thu, 25 Aug 2011 16:17:55 +0000 (10:17 -0600)]
perf record: Create events initially disabled and enable after init

perf-record currently creates events enabled. When doing a system wide
collection (-a arg) this causes data collection for perf's
initialization activities -- eg., perf_event__synthesize_threads().

For some events (e.g., context switch S/W event or tracepoints like
syscalls) perf's initialization causes a lot of events to be captured
frequently generating "Check IO/CPU overload!" warnings on larger
systems (e.g., 2 socket, quad core, hyperthreading).

perf's initialization phase can be skipped by creating events
disabled and then enabling them once the initialization is done.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1314289075-14706-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Add some heuristics for choosing the best duplicate symbol
Anton Blanchard [Wed, 24 Aug 2011 06:40:17 +0000 (16:40 +1000)]
perf symbols: Add some heuristics for choosing the best duplicate symbol

Try and pick the best symbol based on a few heuristics:

-  Prefer a non weak symbol over a weak one
-  Prefer a global symbol over a non global one
-  Prefer a symbol with less underscores (idea taken from kallsyms.c)
-  If all else fails, choose the symbol with the longest name

Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065243.161953371@samba.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Preserve symbol scope when parsing /proc/kallsyms
Anton Blanchard [Wed, 24 Aug 2011 06:40:16 +0000 (16:40 +1000)]
perf symbols: Preserve symbol scope when parsing /proc/kallsyms

kallsyms__parse capitalises the symbol type, so every symbol is marked
global. Remove this and fix symbol_type__is_a to handle both local and
global symbols.

Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065243.077125989@samba.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: /proc/kallsyms does not sort module symbols
Anton Blanchard [Wed, 24 Aug 2011 06:40:15 +0000 (16:40 +1000)]
perf symbols: /proc/kallsyms does not sort module symbols

kallsyms__parse assumes that /proc/kallsyms is sorted and sets the end
of the previous symbol to the start of the current one.

Unfortunately module symbols are not sorted, eg:

ffffffffa0081f30 t e1000_clean_rx_irq   [e1000e]
ffffffffa00817a0 t e1000_alloc_rx_buffers       [e1000e]

Some symbols end up with a negative length and others have a length
larger than they should. This results in confusing perf output.

We already have a function to fixup the end of zero length symbols so
use that instead.

Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065242.969681349@samba.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Fix ppc64 SEGV in dso__load_sym with debuginfo files
Anton Blanchard [Wed, 24 Aug 2011 06:40:14 +0000 (16:40 +1000)]
perf symbols: Fix ppc64 SEGV in dso__load_sym with debuginfo files

64bit PowerPC debuginfo files have an empty function descriptor section.
I hit a SEGV when perf tried to use this section for symbol resolution.

To fix this we need to check the section is valid and we can do this by
checking for type SHT_PROGBITS.

Cc: <stable@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric B Munson <emunson@mgebm.net>
Link: http://lkml.kernel.org/r/20110824065242.895239970@samba.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf probe: Fix regression of variable finder
Masami Hiramatsu [Sat, 20 Aug 2011 05:39:23 +0000 (14:39 +0900)]
perf probe: Fix regression of variable finder

Fix to call convert_variable() if previous call does not fail.

To call convert_variable, it ensures "ret" is 0. However, since
"ret" has the return value of synthesize_perf_probe_arg() which
always returns positive value if it succeeded, perf probe doesn't
call convert_variable(). This will cause a SEGV when we add an
event with arguments.

This has to be fixed as it ensures "ret" is greater than 0
(or not negative).

This regression has been introduced by my previous patch, f182e3e1.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110820053922.3286.65805.stgit@fedora15
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Fri, 23 Sep 2011 13:26:37 +0000 (15:26 +0200)]
Merge branch 'fix/asoc' into for-linus

10 years agoALSA: usb-audio - clear chip->probing on error exit
Thomas Pfaff [Thu, 22 Sep 2011 16:26:06 +0000 (18:26 +0200)]
ALSA: usb-audio - clear chip->probing on error exit

The Terratec Aureon 5.1 USB sound card support is broken since kernel
2.6.39.
2.6.39 introduced power management support for USB sound cards that added
a probing flag in struct snd_usb_audio.

During the probe of the card it gives following error message :

usb 7-2: new full speed USB device number 2 using uhci_hcd
cannot find UAC_HEADER
snd-usb-audio: probe of 7-2:1.3 failed with error -5
input: USB Audio as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.3/input/input6
generic-usb 0003:0CCD:0028.0001: input: USB HID v1.00 Device [USB Audio]
on usb-0000:00:1d.1-2/input3

I can not comment about that "cannot find UAC_HEADER" error, but until
2.6.38 the card worked anyway.
With 2.6.39 chip->probing remains 1 on error exit, and any later ioctl
stops in snd_usb_autoresume with -ENODEV.

Signed-off-by: Thomas Pfaff <tpfaff@gmx.net>
Cc: <stable@kernel.org> [2.6.39+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agodrm/radeon/kms: fix DDIA enable on some rs690 systems
Alex Deucher [Thu, 22 Sep 2011 14:47:23 +0000 (10:47 -0400)]
drm/radeon/kms: fix DDIA enable on some rs690 systems

DVOOutputControl checks the value of of bios scratch reg 3
on some tables and assumes the encoder is already enabled
if the DFP2_ACTIVE bit is set.  Clear that bit so the table
sets the DDIA enable bit properly.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>