pandora-kernel.git
8 years agoext2: Fix fs corruption in ext2_get_xip_mem()
Jan Kara [Tue, 5 Nov 2013 00:15:38 +0000 (01:15 +0100)]
ext2: Fix fs corruption in ext2_get_xip_mem()

Commit 8e3dffc651cb "Ext2: mark inode dirty after the function
dquot_free_block_nodirty is called" unveiled a bug in __ext2_get_block()
called from ext2_get_xip_mem(). That function called ext2_get_block()
mistakenly asking it to map 0 blocks while 1 was intended. Before the
above mentioned commit things worked out fine by luck but after that commit
we started returning that we allocated 0 blocks while we in fact
allocated 1 block and thus allocation was looping until all blocks in
the filesystem were exhausted.

Fix the problem by properly asking for one block and also add assertion
in ext2_get_blocks() to catch similar problems.

Reported-and-tested-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
8 years agoquota: info leak in quota_getquota()
Dan Carpenter [Fri, 1 Nov 2013 10:21:54 +0000 (13:21 +0300)]
quota: info leak in quota_getquota()

The if_dqblk struct has a 4 byte hole at the end of the struct so
uninitialized stack information is leaked to user space.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
8 years agojbd: Revert "jbd: remove dependency on __GFP_NOFAIL"
Jan Kara [Thu, 31 Oct 2013 19:37:15 +0000 (20:37 +0100)]
jbd: Revert "jbd: remove dependency on __GFP_NOFAIL"

This reverts commit 05713082ab7690a2b22b044cfc867f346c39cd2d. The idea
to remove __GFP_NOFAIL was opposed by Andrew Morton. Although mm guys do
want to get rid of __GFP_NOFAIL users, opencoding the allocation retry
is even worse.

See emails following
http://www.gossamer-threads.com/lists/linux/kernel/1809153#1809153

Signed-off-by: Jan Kara <jack@suse.cz>
8 years agoudf: fix for pathetic mount times in case of invalid file system
Peter A. Felvegi [Fri, 18 Oct 2013 18:07:44 +0000 (20:07 +0200)]
udf: fix for pathetic mount times in case of invalid file system

The UDF driver was not strict enough about checking the IDs in the
VSDs when mounting, which resulted in reading through all the sectors
of the block device in some unfortunate cases. Eg, trying to mount my
uninitialized 200G SSD partition (all 0xFF bytes) took ~350 minutes to
fail, because the code expected some of the valid IDs or a zero byte.
During this, the mount couldn't be killed, sync from the cmdline
blocked, and the machine froze into the shutdown. Valid filesystems
(extX, btrfs, ntfs) were rejected by the mere accident of having a
zero byte at just the right place in some of their sectors, close
enough to the beginning not to generate excess I/O. The fix adds a
hard limit on the VSD sector offset, adds the two missing VSD IDs, and
stops scanning when encountering an invalid ID. Also replaced the
magic number 32768 with a more meaningful #define, and supressed the
bogus message about failing to read the first sector if no UDF fs was
detected.

Signed-off-by: Peter A. Felvegi <petschy@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
8 years agoext3: Count journal as bsddf overhead in ext3_statfs
Eric Sandeen [Tue, 15 Oct 2013 23:45:17 +0000 (18:45 -0500)]
ext3: Count journal as bsddf overhead in ext3_statfs

ext4 counts journal space as bsddf overhead, but ext3 does not.

For some reason when I patched ext4 I thought I should leave
ext3 alone, but frankly it makes more sense to fix it, I think.

Otherwise we get inconsistent behavior from ext3 under ext3.ko,
and ext3 under ext4.ko, which is not at all desirable...

This is testable by xfstests shared/289, though it will need
modification because it currently special-cases ext3.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
8 years agoLinux 3.12-rc5 v3.12-rc5
Linus Torvalds [Sun, 13 Oct 2013 22:41:28 +0000 (15:41 -0700)]
Linux 3.12-rc5

8 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Sun, 13 Oct 2013 18:41:26 +0000 (11:41 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog fixes from Wim Van Sebroeck:
 "This will fix a deadlock on the ts72xx_wdt driver, fix bitmasks in the
  kempld_wdt driver and fix a section mismatch in the sunxi_wdt driver"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: sunxi: Fix section mismatch
  watchdog: kempld_wdt: Fix bit mask definition
  watchdog: ts72xx_wdt: locking bug in ioctl

8 years agowatchdog: sunxi: Fix section mismatch
Maxime Ripard [Sat, 5 Oct 2013 14:20:17 +0000 (16:20 +0200)]
watchdog: sunxi: Fix section mismatch

This driver has a section mismatch, for probe and remove functions,
leading to the following warning during the compilation.

WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in
reference from the variable sunxi_wdt_driver to the function
.init.text:sunxi_wdt_probe()
The variable sunxi_wdt_driver references
the function __init sunxi_wdt_probe()

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
8 years agowatchdog: kempld_wdt: Fix bit mask definition
Jingoo Han [Mon, 23 Sep 2013 10:16:57 +0000 (19:16 +0900)]
watchdog: kempld_wdt: Fix bit mask definition

STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)'
handles [9:8] bits. Thus, it should be fixed in order to handle
[5:4] bits.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
8 years agowatchdog: ts72xx_wdt: locking bug in ioctl
Dan Carpenter [Fri, 23 Aug 2013 08:40:59 +0000 (11:40 +0300)]
watchdog: ts72xx_wdt: locking bug in ioctl

Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a
interruptible deadlock.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
8 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Sun, 13 Oct 2013 16:59:10 +0000 (09:59 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A small batch of fixes this week, mostly OMAP related.  Nothing stands
  out as particularly controversial.

  Also a fix for a 3.12-rc1 timer regression for Exynos platforms,
  including the Chromebooks"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: exynos: dts: Update 5250 arch timer node with clock frequency
  ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
  ARM: mach-omap2: board-generic: fix undefined symbol
  ARM: dts: Fix pinctrl mask for omap3
  ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
  ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT

8 years agoARM: exynos: dts: Update 5250 arch timer node with clock frequency
Yuvaraj Kumar C D [Wed, 18 Sep 2013 10:11:53 +0000 (15:41 +0530)]
ARM: exynos: dts: Update 5250 arch timer node with clock frequency

Without the "clock-frequency" property in arch timer node, could able
to see the below crash dump.

[<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14)
[<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0)
[<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18)
[<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74)
[<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c)
[<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134)
[<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c)
[<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58)
[<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c)
[<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c)

THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set
up the CNTFRQ register as expected by arch_timer. Instead, we have to specify
the frequency in the device tree like this.

Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
[olof: Changed subject, added comment, elaborated on commit message]
Signed-off-by: Olof Johansson <olof@lixom.net>
8 years agoMerge tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kerne...
Olof Johansson [Sun, 13 Oct 2013 16:33:32 +0000 (09:33 -0700)]
Merge tag 'fixes-against-v3.12-rc3-take2' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Few fixes for omap3 related hangs and errors that people have
noticed now that people are actually using the device tree
based booting for omap3.

Also one regression fix for timer compile for dra7xx when
omap5 is not selected, and a LED regression fix for n900.

* tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
  ARM: mach-omap2: board-generic: fix undefined symbol
  ARM: dts: Fix pinctrl mask for omap3
  ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
  ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT

Signed-off-by: Olof Johansson <olof@lixom.net>
8 years agoMerge branch 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Sun, 13 Oct 2013 16:13:28 +0000 (09:13 -0700)]
Merge branch 'parisc-3.12' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
 "This patchset includes a bugfix to prevent a kernel crash when memory
  in page zero is accessed by the kernel itself, e.g.  via
  probe_kernel_read().

  Furthermore we now export flush_cache_page() which is needed
  (indirectly) by the lustre filesystem.  The other patches remove
  unused functions and optimizes the page fault handler to only evaluate
  variables if needed, which again protects against possible kernel
  crashes"

* 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: let probe_kernel_read() capture access to page zero
  parisc: optimize variable initialization in do_page_fault
  parisc: fix interruption handler to respect pagefault_disable()
  parisc: mark parisc_terminate() noreturn and cold.
  parisc: remove unused syscall_ipi() function.
  parisc: kill SMP single function call interrupt
  parisc: Export flush_cache_page() (needed by lustre)

8 years agoMerge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Sun, 13 Oct 2013 16:02:03 +0000 (09:02 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine fixes from Vinod Koul:
 "Another week, time to send another fixes request taking time out of
  extended weekend for the festivities in this part of the world.

  We have two fixes from Sergei for rcar driver and one fixing memory
  leak of edma driver by Geyslan"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: edma.c: remove edma_desc leakage
  rcar-hpbdma: add parameter to set_slave() method
  rcar-hpbdma: remove shdma_free_irq() calls

8 years agoparisc: let probe_kernel_read() capture access to page zero
Helge Deller [Wed, 9 Oct 2013 21:47:03 +0000 (23:47 +0200)]
parisc: let probe_kernel_read() capture access to page zero

Signed-off-by: Helge Deller <deller@gmx.de>
8 years agoparisc: optimize variable initialization in do_page_fault
John David Anglin [Sat, 5 Oct 2013 14:55:36 +0000 (10:55 -0400)]
parisc: optimize variable initialization in do_page_fault

The attached change defers the initialization of the variables tsk, mm
and flags until they are needed. As a result, the code won't crash if a
kernel probe is done with a corrupt context and the code will be better
optimized.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
8 years agoparisc: fix interruption handler to respect pagefault_disable()
Helge Deller [Tue, 1 Oct 2013 19:54:46 +0000 (21:54 +0200)]
parisc: fix interruption handler to respect pagefault_disable()

Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel.  The
problem is, that in print_worker_info() we try to read the workqueue info via
the probe_kernel_read() functions which use pagefault_disable() to avoid
crashes like this:
    probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq));
    probe_kernel_read(&wq, &pwq->wq, sizeof(wq));
    probe_kernel_read(name, wq->name, sizeof(name) - 1);

The problem here is, that the first probe_kernel_read(&pwq) might return zero
in pwq and as such the following probe_kernel_reads() try to access contents of
the page zero which is read protected and generate a kernel segfault.

With this patch we fix the interruption handler to call parisc_terminate()
directly only if pagefault_disable() was not called (in which case
preempt_count()==0).  Otherwise we hand over to the pagefault handler which
will try to look up the faulting address in the fixup tables.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.0+
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
8 years agoparisc: mark parisc_terminate() noreturn and cold.
Helge Deller [Wed, 9 Oct 2013 21:12:46 +0000 (23:12 +0200)]
parisc: mark parisc_terminate() noreturn and cold.

Signed-off-by: Helge Deller <deller@gmx.de>
8 years agoparisc: remove unused syscall_ipi() function.
Helge Deller [Wed, 9 Oct 2013 21:10:14 +0000 (23:10 +0200)]
parisc: remove unused syscall_ipi() function.

Signed-off-by: Helge Deller <deller@gmx.de>
8 years agoparisc: kill SMP single function call interrupt
Jiang Liu [Wed, 11 Sep 2013 16:07:18 +0000 (00:07 +0800)]
parisc: kill SMP single function call interrupt

Commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic
similar to smp_call_function_single()" has unified the way to handle
single and multiple cross-CPU function calls. Now only one interrupt
is needed for architecture specific code to support generic SMP function
call interfaces, so kill the redundant single function call interrupt.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
8 years agoparisc: Export flush_cache_page() (needed by lustre)
Geert Uytterhoeven [Thu, 5 Sep 2013 09:33:15 +0000 (11:33 +0200)]
parisc: Export flush_cache_page() (needed by lustre)

ERROR: "flush_cache_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined!

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
8 years agovfs: allow O_PATH file descriptors for fstatfs()
Linus Torvalds [Mon, 30 Sep 2013 15:35:10 +0000 (08:35 -0700)]
vfs: allow O_PATH file descriptors for fstatfs()

Olga reported that file descriptors opened with O_PATH do not work with
fstatfs(), found during further development of ksh93's thread support.

There is no reason to not allow O_PATH file descriptors here (fstatfs is
very much a path operation), so use "fdget_raw()".  See commit
55815f70147d ("vfs: make O_PATH file descriptors usable for 'fstat()'")
for a very similar issue reported for fstat() by the same team.

Reported-and-tested-by: ольга крыжановская <olga.kryzhanovska@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org # O_PATH introduced in 3.0+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 12 Oct 2013 19:55:15 +0000 (12:55 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 bugfixes from Ted Ts'o:
 "A bug fix and performance regression fix for ext4"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix memory leak in xattr
  ext4: fix performance regression in writeback of random writes

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Sat, 12 Oct 2013 19:54:24 +0000 (12:54 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "We've got more bug fixes in my for-linus branch:

  One of these fixes another corner of the compression oops from last
  time.  Miao nailed down some problems with concurrent snapshot
  deletion and drive balancing.

  I kept out one of his patches for more testing, but these are all
  stable"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix oops caused by the space balance and dead roots
  Btrfs: insert orphan roots into fs radix tree
  Btrfs: limit delalloc pages outside of find_delalloc_range
  Btrfs: use right root when checking for hash collision

8 years agoMerge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Sat, 12 Oct 2013 18:53:43 +0000 (11:53 -0700)]
Merge tag 'sound-3.12' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "All stable fixes except for a trivial headset mic fixup: the removal
  of bogus frame checks in snd-usb-usx2y driver that have regressed in
  the recent kernel versions, the HD-audio HDMI channel map fix, and a
  few HD-audio device-specific fixes"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack
  ALSA: hda - Add a headset mic model for ALC269 and friends
  ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model)
  ALSA: hda - Add fixup for ASUS N56VZ
  ALSA: hda - hdmi: Fix channel map switch not taking effect
  ALSA: hda - Fix mono speakers and headset mic on Dell Vostro 5470
  ALSA: snd-usb-usx2y: remove bogus frame checks

8 years agoMerge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Linus Torvalds [Sat, 12 Oct 2013 18:52:40 +0000 (11:52 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "We had various reports of problems with deferred probing in the I2C
  subsystem, so this pull requst is a little bigger than usual.

  Most issues should be addressed now so devices will be found
  correctly.  A few ususal driver bugfixes are in here, too"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-mux-pinctrl: use deferred probe when adapter not found
  i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found
  i2c: i2c-mux-gpio: use deferred probing
  i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors
  i2c: omap: Clear ARDY bit twice
  i2c: Not all adapters have a parent
  i2c: i2c-stu300: replace platform_driver_probe to support deferred probing
  i2c: i2c-mxs: replace platform_driver_probe to support deferred probing
  i2c: i2c-imx: replace platform_driver_probe to support deferred probing
  i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing

8 years agoext4: fix memory leak in xattr
Dave Jones [Fri, 11 Oct 2013 00:05:35 +0000 (20:05 -0400)]
ext4: fix memory leak in xattr

If we take the 2nd retry path in ext4_expand_extra_isize_ea, we
potentionally return from the function without having freed these
allocations.  If we don't do the return, we over-write the previous
allocation pointers, so we leak either way.

Spotted with Coverity.

[ Fixed by tytso to set is and bs to NULL after freeing these
  pointers, in case in the retry loop we later end up triggering an
  error causing a jump to cleanup, at which point we could have a double
  free bug. -- Ted ]

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@vger.kernel.org
8 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 12 Oct 2013 18:06:18 +0000 (11:06 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull gcc "asm goto" miscompilation workaround from Ingo Molnar:
 "This is the fix for the GCC miscompilation discussed in the following
  lkml thread:

    [x86] BUG: unable to handle kernel paging request at 00740060

  The bug in GCC has been fixed by Jakub and the fix will be part of the
  GCC 4.8.2 release expected to be released next week - so the quirk's
  version test checks for <= 4.8.1.

  The quirk is only added to compiler-gcc4.h and not to the higher level
  compiler.h because all asm goto uses are behind a feature check"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  compiler/gcc4: Add quirk for 'asm goto' miscompilation bug

8 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 12 Oct 2013 17:36:03 +0000 (10:36 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "A build fix and a reboot quirk"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Add reboot quirk for Dell Latitude E5410
  x86, build, pci: Fix PCI_MSI build on !SMP

8 years agoMerge tag 'arc-fixes-for-3.12-part3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 12 Oct 2013 17:34:14 +0000 (10:34 -0700)]
Merge tag 'arc-fixes-for-3.12-part3' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fix from Vineet Gupta:
 "Fix for broken gdb 'jump'"

* tag 'arc-fixes-for-3.12-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc"

8 years agoARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc"
Vineet Gupta [Thu, 10 Oct 2013 14:03:57 +0000 (19:33 +0530)]
ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc"

ARCompact TRAP_S insn used for breakpoints, commits before exception is
taken (updating architectural PC). So ptregs->ret contains next-PC and
not the breakpoint PC itself. This is different from other restartable
exceptions such as TLB Miss where ptregs->ret has exact faulting PC.
gdb needs to know exact-PC hence ARC ptrace GETREGSET provides for
@stop_pc which returns ptregs->ret vs. EFA depending on the
situation.

However, writing stop_pc (SETREGSET request), which updates ptregs->ret
doesn't makes sense stop_pc doesn't always correspond to that reg as
described above.

This was not an issue so far since user_regs->ret / user_regs->stop_pc
had same value and both writing to ptregs->ret was OK, needless, but NOT
broken, hence not observed.

With gdb "jump", they diverge, and user_regs->ret updating ptregs is
overwritten immediately with stop_pc, which this patch fixes.

Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
8 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Fri, 11 Oct 2013 18:24:58 +0000 (11:24 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fix from Ralf Baechle:
 "Just one fix.  The stack protector was loading the value of the canary
  instead of its address"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: stack protector: Fix per-task canary switch

8 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 11 Oct 2013 17:41:21 +0000 (10:41 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "All over the map..

   - nouveau:
     disable MSI, needs more work, will try again next merge window
   - radeon:
      audio + uvd regression fixes, dpm fixes, reset fixes
   - i915:
     the dpms fix might fix your haswell

  And one pain in the ass revert, so we have VGA arbitration that when
  implemented 4-5 years ago really hoped that GPUs could remove
  themselves from arbitration completely once they had a kernel driver.

  It seems Intel hw designers decided that was too nice a facility to
  allow us to have so they removed it when they went on-die (so since
  Ironlake at least).  Now Alex Williamson added support for VGA
  arbitration for newer GPUs however this now exposes itself to
  userspace as requireing arbitration of GPU VGA regions and the X
  server gets involved and disables things that it can't handle when VGA
  access is possibly required around every operation.

  So in order to not break userspace we just reverted things back to the
  old known broken status so maybe we can try and design out way out.

  Ville also had a patch to use stop machine for the two times Intel
  needs to access VGA space, that might be acceptable with some rework,
  but for now myself and Daniel agreed to just go back"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (23 commits)
  Revert "i915: Update VGA arbiter support for newer devices"
  Revert "drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done"
  drm/radeon: re-enable sw ACR support on pre-DCE4
  drm/radeon/dpm: disable bapm on TN asics
  drm/radeon: improve soft reset on CIK
  drm/radeon: improve soft reset on SI
  drm/radeon/dpm: off by one in si_set_mc_special_registers()
  drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers()
  drm/radeon: forever loop on error in radeon_do_test_moves()
  drm/radeon: fix hw contexts for SUMO2 asics
  drm/radeon: fix typo in CP DMA register headers
  drm/radeon/dpm: disable multiple UVD states
  drm/radeon: use hw generated CTS/N values for audio
  drm/radeon: fix N/CTS clock matching for audio
  drm/radeon: use 64-bit math to calculate CTS values for audio (v2)
  drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation
  Revert "drm/fb-helper: don't sleep for screen unblank when an oops is in progress"
  drm/gma500: fix things after get/put page helpers
  drm/nouveau/mc: disable msi support by default, it's busted in tons of places
  drm/i915: Only apply DPMS to the encoder if enabled
  ...

8 years agoALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack
David Henningsson [Fri, 11 Oct 2013 11:46:04 +0000 (13:46 +0200)]
ALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack

Just got the positive confirmation from a tester:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227093/comments/28

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Add a headset mic model for ALC269 and friends
David Henningsson [Fri, 11 Oct 2013 08:18:46 +0000 (10:18 +0200)]
ALSA: hda - Add a headset mic model for ALC269 and friends

Using the headset mic model will cause the headset mic to be labeled
"headset mic" instead of just "mic".

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model)
David Henningsson [Fri, 11 Oct 2013 08:18:45 +0000 (10:18 +0200)]
ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model)

The external mic showed up with a precense detect of "always present",
essentially disabling the internal mic. Therefore turn off presence
detection for this pin.

Note: The external mic seems not yet working, but an internal mic is
certainly better than no mic at all.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1227093
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agocompiler/gcc4: Add quirk for 'asm goto' miscompilation bug
Ingo Molnar [Thu, 10 Oct 2013 08:16:30 +0000 (10:16 +0200)]
compiler/gcc4: Add quirk for 'asm goto' miscompilation bug

Fengguang Wu, Oleg Nesterov and Peter Zijlstra tracked down
a kernel crash to a GCC bug: GCC miscompiles certain 'asm goto'
constructs, as outlined here:

  http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670

Implement a workaround suggested by Jakub Jelinek.

Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agoRevert "i915: Update VGA arbiter support for newer devices"
Dave Airlie [Fri, 11 Oct 2013 05:12:04 +0000 (15:12 +1000)]
Revert "i915: Update VGA arbiter support for newer devices"

This reverts commit 81b5c7bc8de3e6f63419139c2fc91bf81dea8a7d.

Adding drm/i915 into the vga arbiter chain means that X (in a piece of
well-meant paranoia) will do a get/put on the vga decoding around
_every_ accel call down into the ddx. Which results in some nice
performance disasters [1]. This really breaks userspace, by disabling
DRI for everyone, and stops OpenGL from working, this isn't limited
to just the i915 but both the integrated and discrete GPUs on
multi-gpu systems, in other words this causes untold worlds of pain,

Ville tried to come up with a Great Hack to fiddle the required VGA
I/O ops behind everyone's back using stop_machine, but that didn't
really work out [2]. Given that we're fairly late in the -rc stage for
such games let's just revert this all.

One thing we might want to keep is to delay the disabling of the vga
decoding until the fbdev emulation and the fbcon screen is set up. If
we kill vga mem decoding beforehand fbcon can end up with a white
square in the top-left corner it tried to save from the vga memory for
a seamless transition. And we have bug reports on older platforms
which seem to match these symptoms.

But again that's something to play around with in -next.

References: [1] http://lists.x.org/archives/xorg-devel/2013-September/037763.html
References: [2] http://www.spinics.net/lists/intel-gfx/msg34062.html
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agoRevert "drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done"
Dave Airlie [Fri, 11 Oct 2013 05:11:52 +0000 (15:11 +1000)]
Revert "drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done"

This reverts commit 6e1b4fdad5157bb9e88777d525704aba24389bee.

This is part of a revert due to a userspace breakage, better explained in the revert of 1a1a4cbf4906a13c0c377f708df5d94168e7b582.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agoMerge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Fri, 11 Oct 2013 03:07:15 +0000 (13:07 +1000)]
Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Regression fixes for audio and UVD, several hang fixes,
some DPM fixes.

* 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: re-enable sw ACR support on pre-DCE4
  drm/radeon/dpm: disable bapm on TN asics
  drm/radeon: improve soft reset on CIK
  drm/radeon: improve soft reset on SI
  drm/radeon/dpm: off by one in si_set_mc_special_registers()
  drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers()
  drm/radeon: forever loop on error in radeon_do_test_moves()
  drm/radeon: fix hw contexts for SUMO2 asics
  drm/radeon: fix typo in CP DMA register headers
  drm/radeon/dpm: disable multiple UVD states
  drm/radeon: use hw generated CTS/N values for audio
  drm/radeon: fix N/CTS clock matching for audio
  drm/radeon: use 64-bit math to calculate CTS values for audio (v2)
  drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation

8 years agodma: edma.c: remove edma_desc leakage
Geyslan G. Bem [Mon, 7 Oct 2013 22:19:58 +0000 (19:19 -0300)]
dma: edma.c: remove edma_desc leakage

Free memory allocated to edma_desc when failing to allocate slot.

Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
8 years agorcar-hpbdma: add parameter to set_slave() method
Sergei Shtylyov [Wed, 25 Sep 2013 22:31:37 +0000 (02:31 +0400)]
rcar-hpbdma: add parameter to set_slave() method

Commit 4981c4dc194efb18f0e9a02f1b43e926f2f0d2bb (DMA: shdma: switch DT mode to
use configuration data from a match table) added a new parameter to set_slave()
method but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a
(dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the
old prototype which caused this warning:

drivers/dma/sh/rcar-hpbdma.c:485: warning: initialization from incompatible
pointer type

The newly added parameter  is used to override DMA slave address from 'struct
hpb_dmae_slave_config', so we have to add the 'slave_addr' field to 'struct
hpb_dmae_chan', conditionally assign it in set_slave() method, and return in
slave_addr() method.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
8 years agorcar-hpbdma: remove shdma_free_irq() calls
Sergei Shtylyov [Wed, 25 Sep 2013 22:28:37 +0000 (02:28 +0400)]
rcar-hpbdma: remove shdma_free_irq() calls

Commit c1c63a14f4f2419d093acd7164eccdff315baa86 (DMA: shdma: switch to managed
resource allocation) got rid of shdma_free_irq() but  unfortunately got merged
later than commit c4f6c41ba790bbbfcebb4c47a709ac8ff1fe1af9 (dma: add driver for
R-Car HPB-DMAC), so that the HPB-DMAC driver retained the calls and got broken:

drivers/dma/sh/rcar-hpbdma.c: In function `hpb_dmae_alloc_chan_resources':
drivers/dma/sh/rcar-hpbdma.c:435: error: implicit declaration of function
`shdma_free_irq'

Fix this compilation error by removing the remaining shdma_free_irq() calls.

Reported-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
8 years agoBtrfs: fix oops caused by the space balance and dead roots
Miao Xie [Wed, 25 Sep 2013 13:47:44 +0000 (21:47 +0800)]
Btrfs: fix oops caused by the space balance and dead roots

When doing space balance and subvolume destroy at the same time, we met
the following oops:

kernel BUG at fs/btrfs/relocation.c:2247!
RIP: 0010: [<ffffffffa04cec16>] prepare_to_merge+0x154/0x1f0 [btrfs]
Call Trace:
 [<ffffffffa04b5ab7>] relocate_block_group+0x466/0x4e6 [btrfs]
 [<ffffffffa04b5c7a>] btrfs_relocate_block_group+0x143/0x275 [btrfs]
 [<ffffffffa0495c56>] btrfs_relocate_chunk.isra.27+0x5c/0x5a2 [btrfs]
 [<ffffffffa0459871>] ? btrfs_item_key_to_cpu+0x15/0x31 [btrfs]
 [<ffffffffa048b46a>] ? btrfs_get_token_64+0x7e/0xcd [btrfs]
 [<ffffffffa04a3467>] ? btrfs_tree_read_unlock_blocking+0xb2/0xb7 [btrfs]
 [<ffffffffa049907d>] btrfs_balance+0x9c7/0xb6f [btrfs]
 [<ffffffffa049ef84>] btrfs_ioctl_balance+0x234/0x2ac [btrfs]
 [<ffffffffa04a1e8e>] btrfs_ioctl+0xd87/0x1ef9 [btrfs]
 [<ffffffff81122f53>] ? path_openat+0x234/0x4db
 [<ffffffff813c3b78>] ? __do_page_fault+0x31d/0x391
 [<ffffffff810f8ab6>] ? vma_link+0x74/0x94
 [<ffffffff811250f5>] vfs_ioctl+0x1d/0x39
 [<ffffffff811258c8>] do_vfs_ioctl+0x32d/0x3e2
 [<ffffffff811259d4>] SyS_ioctl+0x57/0x83
 [<ffffffff813c3bfa>] ? do_page_fault+0xe/0x10
 [<ffffffff813c73c2>] system_call_fastpath+0x16/0x1b

It is because we returned the error number if the reference of the root was 0
when doing space relocation. It was not right here, because though the root
was dead(refs == 0), but the space it held still need be relocated, or we
could not remove the block group. So in this case, we should return the root
no matter it is dead or not.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
8 years agoBtrfs: insert orphan roots into fs radix tree
Miao Xie [Wed, 25 Sep 2013 13:47:43 +0000 (21:47 +0800)]
Btrfs: insert orphan roots into fs radix tree

Now we don't drop all the deleted snapshots/subvolumes before the space
balance. It means we have to relocate the space which is held by the dead
snapshots/subvolumes. So we must into them into fs radix tree, or we would
forget to commit the change of them when doing transaction commit, and it
would corrupt the metadata.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
8 years agoBtrfs: limit delalloc pages outside of find_delalloc_range
Josef Bacik [Tue, 8 Oct 2013 02:11:09 +0000 (22:11 -0400)]
Btrfs: limit delalloc pages outside of find_delalloc_range

Liu fixed part of this problem and unfortunately I steered him in slightly the
wrong direction and so didn't completely fix the problem.  The problem is we
limit the size of the delalloc range we are looking for to max bytes and then we
try to lock that range.  If we fail to lock the pages in that range we will
shrink the max bytes to a single page and re loop.  However if our first page is
inside of the delalloc range then we will end up limiting the end of the range
to a period before our first page.  This is illustrated below

[0 -------- delalloc range --------- 256mb]
                                  [page]

So find_delalloc_range will return with delalloc_start as 0 and end as 128mb,
and then we will notice that delalloc_start < *start and adjust it up, but not
adjust delalloc_end up, so things go sideways.  To fix this we need to not limit
the max bytes in find_delalloc_range, but in find_lock_delalloc_range and that
way we don't end up with this confusion.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
8 years agoBtrfs: use right root when checking for hash collision
Josef Bacik [Wed, 9 Oct 2013 16:24:04 +0000 (12:24 -0400)]
Btrfs: use right root when checking for hash collision

btrfs_rename was using the root of the old dir instead of the root of the new
dir when checking for a hash collision, so if you tried to move a file into a
subvol it would freak out because it would see the file you are trying to move
in its current root.  This fixes the bug where this would fail

btrfs subvol create test1
btrfs subvol create test2
mv test1 test2.

Thanks to Chris Murphy for catching this,

Cc: stable@vger.kernel.org
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
8 years agobcache: Fix a null ptr deref regression
Kent Overstreet [Fri, 11 Oct 2013 00:31:15 +0000 (17:31 -0700)]
bcache: Fix a null ptr deref regression

Commit c0f04d88e46d ("bcache: Fix flushes in writeback mode") was fixing
a reported data corruption bug, but it seems some last minute
refactoring or rebasing introduced a null pointer deref.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Fri, 11 Oct 2013 01:16:02 +0000 (18:16 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix root cause of crash/error seen in applesmc driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (applesmc) Always read until end of data

8 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Fri, 11 Oct 2013 01:15:23 +0000 (18:15 -0700)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild fix from Michal Marek:
 "Here is an ARM Makefile fix that you even acked.  After nobody wanted
  to take it, it ended up in the kbuild tree"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  arm, kbuild: make "make install" not depend on vmlinux

8 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Thu, 10 Oct 2013 20:57:10 +0000 (13:57 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog fix from Wim Van Sebroeck:
 "Make sure that the hpwdt driver will not load auxilary iLO devices"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: hpwdt: Patch to ignore auxilary iLO devices

8 years agokobject: show debug info on delayed kobject release
Fengguang Wu [Wed, 9 Oct 2013 01:26:21 +0000 (09:26 +0800)]
kobject: show debug info on delayed kobject release

Useful for locating buggy drivers on kernel oops.

It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is
hopefully only enabled in debug kernels (like maybe the Fedora rawhide
one, or at developers), so being a bit more verbose is likely ok.

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agowatchdog: hpwdt: Patch to ignore auxilary iLO devices
Mingarelli, Thomas [Fri, 9 Aug 2013 16:31:09 +0000 (16:31 +0000)]
watchdog: hpwdt: Patch to ignore auxilary iLO devices

This patch is to prevent hpwdt from loading on any auxilary iLO devices defined
after the initial (or main) iLO device. All auxilary iLO devices will have a
subsystem device ID set to 0x1979 in order for hpwdt to differentiate between
the two types.

Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Tested-by: Lisa Mitchell <lisa.mitchell@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
8 years agoMerge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso...
Linus Torvalds [Thu, 10 Oct 2013 19:31:43 +0000 (12:31 -0700)]
Merge tag 'random_for_linus' of git://git./linux/kernel/git/tytso/random

Pull /dev/random changes from Ted Ts'o:
 "These patches are designed to enable improvements to /dev/random for
  non-x86 platforms, in particular MIPS and ARM"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: allow architectures to optionally define random_get_entropy()
  random: run random_int_secret_init() run after all late_initcalls

8 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 10 Oct 2013 18:33:48 +0000 (11:33 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Fixes for 3.12-rc5: two old PPC bugs and one new (3.12-rc2) x86 bug"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: ppc: booke: check range page invalidation progress on page setup
  KVM: PPC: Book3S HV: Fix typo in saving DSCR
  KVM: nVMX: fix shadow on EPT

8 years agoMerge tag 'spi-v3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Linus Torvalds [Thu, 10 Oct 2013 18:33:02 +0000 (11:33 -0700)]
Merge tag 'spi-v3.12-rc4' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "This is all driver updates, mostly fixes for error handling paths
  except for the s3c64xx and hspi fixes for trying to use runtime PM
  before it is enabled and the pxa2xx fix for interactions between power
  management and interrupt handling"

* tag 'spi-v3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: atmel: Fix incorrect error path
  spi/hspi: fixup Runtime PM enable timing
  spi/s3c64xx: Ensure runtime PM is enabled prior to registration
  spi/clps711x: drop clk_put for devm_clk_get in spi_clps711x_probe()
  spi: fix return value check in dspi_probe()
  spi: mpc512x: fix error return code in mpc512x_psc_spi_do_probe()
  spi: clps711x: Don't call kfree() after spi_master_put/spi_unregister_master
  spi/pxa2xx: check status register as well to determine if the device is off

8 years agorandom: allow architectures to optionally define random_get_entropy()
Theodore Ts'o [Sat, 21 Sep 2013 17:58:22 +0000 (13:58 -0400)]
random: allow architectures to optionally define random_get_entropy()

Allow architectures which have a disabled get_cycles() function to
provide a random_get_entropy() function which provides a fine-grained,
rapidly changing counter that can be used by the /dev/random driver.

For example, an architecture might have a rapidly changing register
used to control random TLB cache eviction, or DRAM refresh that
doesn't meet the requirements of get_cycles(), but which is good
enough for the needs of the random driver.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
8 years agoMerge tag 'for-linus-20131008' of git://git.infradead.org/linux-mtd
Linus Torvalds [Thu, 10 Oct 2013 18:30:33 +0000 (11:30 -0700)]
Merge tag 'for-linus-20131008' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Brian Norris:
 - fix a small memory leak in some new ONFI code
 - account for additional odd variations of Micron SPI flash

Acked by David Woodhouse.

* tag 'for-linus-20131008' of git://git.infradead.org/linux-mtd:
  mtd: m25p80: Fix 4 byte addressing mode for Micron devices.
  mtd: nand: fix memory leak in ONFI extended parameter page

8 years agodrm/radeon: re-enable sw ACR support on pre-DCE4
Alex Deucher [Thu, 10 Oct 2013 15:47:01 +0000 (11:47 -0400)]
drm/radeon: re-enable sw ACR support on pre-DCE4

HW ACR support may have issues on some older chips, so
use SW ACR for now until we've tested further.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: Rafał Miłecki <zajec5@gmail.com>
8 years agokvm: ppc: booke: check range page invalidation progress on page setup
Bharat Bhushan [Wed, 7 Aug 2013 10:03:46 +0000 (15:33 +0530)]
kvm: ppc: booke: check range page invalidation progress on page setup

When the MM code is invalidating a range of pages, it calls the KVM
kvm_mmu_notifier_invalidate_range_start() notifier function, which calls
kvm_unmap_hva_range(), which arranges to flush all the TLBs for guest pages.
However, the Linux PTEs for the range being flushed are still valid at
that point.  We are not supposed to establish any new references to pages
in the range until the ...range_end() notifier gets called.
The PPC-specific KVM code doesn't get any explicit notification of that;
instead, we are supposed to use mmu_notifier_retry() to test whether we
are or have been inside a range flush notifier pair while we have been
referencing a page.

This patch calls the mmu_notifier_retry() while mapping the guest
page to ensure we are not referencing a page when in range invalidation.

This call is inside a region locked with kvm->mmu_lock, which is the
same lock that is called by the KVM MMU notifier functions, thus
ensuring that no new notification can proceed while we are in the
locked region.

Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
[Backported to 3.12 - Paolo]
Reviewed-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
8 years agoKVM: PPC: Book3S HV: Fix typo in saving DSCR
Paul Mackerras [Fri, 20 Sep 2013 23:53:28 +0000 (09:53 +1000)]
KVM: PPC: Book3S HV: Fix typo in saving DSCR

This fixes a typo in the code that saves the guest DSCR (Data Stream
Control Register) into the kvm_vcpu_arch struct on guest exit.  The
effect of the typo was that the DSCR value was saved in the wrong place,
so changes to the DSCR by the guest didn't persist across guest exit
and entry, and some host kernel memory got corrupted.

Cc: stable@vger.kernel.org [v3.1+]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
8 years agoKVM: nVMX: fix shadow on EPT
Gleb Natapov [Wed, 9 Oct 2013 16:13:19 +0000 (19:13 +0300)]
KVM: nVMX: fix shadow on EPT

72f857950f6f19 broke shadow on EPT. This patch reverts it and fixes PAE
on nEPT (which reverted commit fixed) in other way.

Shadow on EPT is now broken because while L1 builds shadow page table
for L2 (which is PAE while L2 is in real mode) it never loads L2's
GUEST_PDPTR[0-3].  They do not need to be loaded because without nested
virtualization HW does this during guest entry if EPT is disabled,
but in our case L0 emulates L2's vmentry while EPT is enables, so we
cannot rely on vmcs12->guest_pdptr[0-3] to contain up-to-date values
and need to re-read PDPTEs from L2 memory. This is what kvm_set_cr3()
is doing, but by clearing cache bits during L2 vmentry we drop values
that kvm_set_cr3() read from memory.

So why the same code does not work for PAE on nEPT? kvm_set_cr3()
reads pdptes into vcpu->arch.walk_mmu->pdptrs[]. walk_mmu points to
vcpu->arch.nested_mmu while nested guest is running, but ept_load_pdptrs()
uses vcpu->arch.mmu which contain incorrect values. Fix that by using
walk_mmu in ept_(load|save)_pdptrs.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
8 years agoi2c: i2c-mux-pinctrl: use deferred probe when adapter not found
Wolfram Sang [Thu, 10 Oct 2013 08:19:13 +0000 (10:19 +0200)]
i2c: i2c-mux-pinctrl: use deferred probe when adapter not found

If it is not there yet, it might appear later.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agoi2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found
Wolfram Sang [Thu, 10 Oct 2013 08:19:13 +0000 (10:19 +0200)]
i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found

If it is not there yet, it might appear later.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agoi2c: i2c-mux-gpio: use deferred probing
Ionut Nicu [Wed, 9 Oct 2013 09:50:45 +0000 (11:50 +0200)]
i2c: i2c-mux-gpio: use deferred probing

If the i2c-parent bus driver is not loaded, returning
-ENODEV will force people to unload and then reload the
module again to get it working.

Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agoi2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors
Ionut Nicu [Tue, 8 Oct 2013 13:51:53 +0000 (15:51 +0200)]
i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors

of_get_named_gpio could return -E_PROBE_DEFER or another
error code. This error should be passed further instead
of being ignored.

Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agoi2c: omap: Clear ARDY bit twice
Taras Kondratiuk [Mon, 7 Oct 2013 10:41:59 +0000 (13:41 +0300)]
i2c: omap: Clear ARDY bit twice

Initially commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac
"i2c-omap: Double clear of ARDY status in IRQ handler"
added a workaround for undocumented errata ProDB0017052.
But then commit 1d7afc95946487945cc7f5019b41255b72224b70
"i2c: omap: ack IRQ in parts" refactored code and missed
one of ARDY clearings. So current code violates errata.
It causes often i2c bus timeouts on my Pandaboard.

This patch adds a second clearing in place.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
8 years agoi2c: Not all adapters have a parent
Jean Delvare [Thu, 10 Oct 2013 06:04:06 +0000 (08:04 +0200)]
i2c: Not all adapters have a parent

The code in acpi_i2c_register_devices() assumes that all i2c adapters
have a parent. This is not necessarily the case, for example the
i2c-stub driver instantiate a virtual i2c adapter without a parent.
Check for this to avoid a NULL pointer deference.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agoi2c: i2c-stu300: replace platform_driver_probe to support deferred probing
Wolfram Sang [Tue, 8 Oct 2013 20:35:36 +0000 (22:35 +0200)]
i2c: i2c-stu300: replace platform_driver_probe to support deferred probing

Subsystems like pinctrl and gpio rightfully make use of deferred probing at
core level. Now, deferred drivers won't be retried if they don't have a .probe
function specified in the driver struct. Fix this driver to have that, so the
devices it supports won't get lost in a deferred probe.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agoi2c: i2c-mxs: replace platform_driver_probe to support deferred probing
Wolfram Sang [Tue, 8 Oct 2013 20:35:35 +0000 (22:35 +0200)]
i2c: i2c-mxs: replace platform_driver_probe to support deferred probing

Subsystems like pinctrl and gpio rightfully make use of deferred probing at
core level. Now, deferred drivers won't be retried if they don't have a .probe
function specified in the driver struct. Fix this driver to have that, so the
devices it supports won't get lost in a deferred probe.

Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agoi2c: i2c-imx: replace platform_driver_probe to support deferred probing
Wolfram Sang [Tue, 8 Oct 2013 20:35:34 +0000 (22:35 +0200)]
i2c: i2c-imx: replace platform_driver_probe to support deferred probing

Subsystems like pinctrl and gpio rightfully make use of deferred probing at
core level. Now, deferred drivers won't be retried if they don't have a .probe
function specified in the driver struct. Fix this driver to have that, so the
devices it supports won't get lost in a deferred probe.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agoi2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing
Wolfram Sang [Tue, 8 Oct 2013 20:35:33 +0000 (22:35 +0200)]
i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing

Subsystems like pinctrl and gpio rightfully make use of deferred probing at
core level. Now, deferred drivers won't be retried if they don't have a .probe
function specified in the driver struct. Fix this driver to have that, so the
devices it supports won't get lost in a deferred probe.

Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
8 years agodrm/radeon/dpm: disable bapm on TN asics
Alex Deucher [Tue, 8 Oct 2013 01:25:39 +0000 (21:25 -0400)]
drm/radeon/dpm: disable bapm on TN asics

Causes hangs on certain boards.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=70053

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
8 years agodrm/radeon: improve soft reset on CIK
Alex Deucher [Wed, 2 Oct 2013 18:54:44 +0000 (14:54 -0400)]
drm/radeon: improve soft reset on CIK

Disable CG/PG before resetting.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
8 years agodrm/radeon: improve soft reset on SI
Alex Deucher [Wed, 2 Oct 2013 18:50:57 +0000 (14:50 -0400)]
drm/radeon: improve soft reset on SI

Disable CG/PG and stop the rlc before resetting.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
8 years agodrm/radeon/dpm: off by one in si_set_mc_special_registers()
Dan Carpenter [Sat, 28 Sep 2013 09:35:31 +0000 (12:35 +0300)]
drm/radeon/dpm: off by one in si_set_mc_special_registers()

These checks should be ">=" instead of ">".  j is used as an offset into
the table->mc_reg_address[] array and that has
SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE (16) elements.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
8 years agodrm/radeon/dpm/btc: off by one in btc_set_mc_special_registers()
Dan Carpenter [Fri, 27 Sep 2013 20:18:39 +0000 (23:18 +0300)]
drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers()

It should be ">=" instead of ">" here.  The table->mc_reg_address[]
array has SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE (16) elements.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
8 years agodrm/radeon: forever loop on error in radeon_do_test_moves()
Dan Carpenter [Mon, 1 Jul 2013 16:39:34 +0000 (19:39 +0300)]
drm/radeon: forever loop on error in radeon_do_test_moves()

The error path does this:

for (--i; i >= 0; --i) {

which is a forever loop because "i" is unsigned.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
8 years agodrm/radeon: fix hw contexts for SUMO2 asics
wojciech kapuscinski [Tue, 1 Oct 2013 23:54:33 +0000 (19:54 -0400)]
drm/radeon: fix hw contexts for SUMO2 asics

They have 4 rather than 8.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=63599

Signed-off-by: wojciech kapuscinski <wojtask9@wp.pl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
8 years agodrm/radeon: fix typo in CP DMA register headers
Alex Deucher [Tue, 1 Oct 2013 20:40:45 +0000 (16:40 -0400)]
drm/radeon: fix typo in CP DMA register headers

Wrong bit offset for SRC endian swapping.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
8 years agodrm/radeon/dpm: disable multiple UVD states
Alex Deucher [Mon, 30 Sep 2013 23:11:24 +0000 (19:11 -0400)]
drm/radeon/dpm: disable multiple UVD states

Always use the regular UVD state for now.  This fixes
a performance regression with UVD playback on certain APUs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
8 years agodrm/radeon: use hw generated CTS/N values for audio
Alex Deucher [Fri, 27 Sep 2013 22:22:15 +0000 (18:22 -0400)]
drm/radeon: use hw generated CTS/N values for audio

Use the hw generated values rather than calculating
them in the driver.  There may be some older r6xx
asics where this doesn't work correctly.  This remains
to be seen.

See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
8 years agodrm/radeon: fix N/CTS clock matching for audio
Alex Deucher [Fri, 27 Sep 2013 22:19:42 +0000 (18:19 -0400)]
drm/radeon: fix N/CTS clock matching for audio

The drm code that calculates the 1001 clocks rounds up
rather than truncating.  This allows the table to match
properly on those modes.

See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
8 years agodrm/radeon: use 64-bit math to calculate CTS values for audio (v2)
Alex Deucher [Fri, 27 Sep 2013 22:09:54 +0000 (18:09 -0400)]
drm/radeon: use 64-bit math to calculate CTS values for audio (v2)

Avoid losing precision.  See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675

v2: fix math as per Anssi's comments.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
8 years agodrm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation
Alex Deucher [Fri, 27 Sep 2013 22:44:39 +0000 (18:44 -0400)]
drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation

Return -ENOMEM if the allocation fails.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
8 years agoRevert "drm/fb-helper: don't sleep for screen unblank when an oops is in progress"
Dave Airlie [Wed, 9 Oct 2013 21:05:41 +0000 (07:05 +1000)]
Revert "drm/fb-helper: don't sleep for screen unblank when an oops is in progress"

This reverts commit 928c2f0c006bf7f381f58af2b2786d2a858ae311.

This patch double applied, two checks for the price of one.

Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agohwmon: (applesmc) Always read until end of data
Henrik Rydberg [Wed, 2 Oct 2013 17:15:03 +0000 (19:15 +0200)]
hwmon: (applesmc) Always read until end of data

The crash reported and investigated in commit 5f4513 turned out to be
caused by a change to the read interface on newer (2012) SMCs.

Tests by Chris show that simply reading the data valid line is enough
for the problem to go away. Additional tests show that the newer SMCs
no longer wait for the number of requested bytes, but start sending
data right away.  Apparently the number of bytes to read is no longer
specified as before, but instead found out by reading until end of
data. Failure to read until end of data confuses the state machine,
which eventually causes the crash.

As a remedy, assuming bit0 is the read valid line, make sure there is
nothing more to read before leaving the read function.

Tested to resolve the original problem, and runtested on MBA3,1,
MBP4,1, MBP8,2, MBP10,1, MBP10,2. The patch seems to have no effect on
machines before 2012.

Tested-by: Chris Murphy <chris@cmurf.com>
Cc: stable@vger.kernel.org
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
8 years agoMerge remote-tracking branch 'nouveau/drm-nouveau-next' into drm-fixes
Dave Airlie [Wed, 9 Oct 2013 06:09:25 +0000 (16:09 +1000)]
Merge remote-tracking branch 'nouveau/drm-nouveau-next' into drm-fixes

Disable MSIs for now until we can fix them up

* nouveau/drm-nouveau-next:
  drm/nouveau/mc: disable msi support by default, it's busted in tons of places

8 years agodrm/gma500: fix things after get/put page helpers
Rob Clark [Tue, 8 Oct 2013 20:31:59 +0000 (16:31 -0400)]
drm/gma500: fix things after get/put page helpers

Commit 8b9ba7a3 'drm/gma500: use gem get/put page helpers' was missing a
line, which resulted in garbled screen.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Guillaume CLÉMENT <gclement@baobob.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agoARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config fixes-against-v3.12-rc3-take2
Pali Rohár [Mon, 23 Sep 2013 12:50:12 +0000 (14:50 +0200)]
ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config

File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs
attribute if value is higher than max_current specified in board file. By default
global C variables are zero, so changing always failed. This patch adding missing
max_current and setting it to max safe value 100 (10 mA).

It is unclear which commit exactly caused this regression as the lp5523
driver was broken and was hiding the platform data breakage. Now
the driver is fixed so this should be fixed as well.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Joerg Reisenweber <joerg@openmoko.org>
[tony@atomide.com: updated comments to describe regression]
Signed-off-by: Tony Lindgren <tony@atomide.com>
8 years agoALSA: hda - Add fixup for ASUS N56VZ
Takashi Iwai [Tue, 8 Oct 2013 17:57:50 +0000 (19:57 +0200)]
ALSA: hda - Add fixup for ASUS N56VZ

ASUS N56VZ needs a fixup for the bass speaker pin, which was already
provided via model=asus-mode4.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=841645
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoARM: mach-omap2: board-generic: fix undefined symbol
Simon Barth [Tue, 8 Oct 2013 08:50:33 +0000 (10:50 +0200)]
ARM: mach-omap2: board-generic: fix undefined symbol

Since dra7 reuses the  function 'omap5_realtime_timer_init' in
arch/arm/mach-omap2/board-generic.c as timer init function, it has to be
built for this SoC as well.

Signed-off-by: Simon Barth <Simon.Pe.Barth@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
8 years agoARM: dts: Fix pinctrl mask for omap3
Tony Lindgren [Mon, 7 Oct 2013 17:22:01 +0000 (10:22 -0700)]
ARM: dts: Fix pinctrl mask for omap3

The wake-up interrupt bit is available on omap3/4/5 processors
unlike what we claim. Without fixing it we cannot use it on
omap3 and the system configured for wake-up events will just
hang on wake-up.

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
8 years agoARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
Nishanth Menon [Mon, 7 Oct 2013 20:43:49 +0000 (15:43 -0500)]
ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree

SoC family definitions at the moment are reactive to board needs
as a result, beagle-xm would matchup with ti,omap3 which invokes
omap3430_init_early instead of omap3630_init_early. Obviously, this is
the wrong behavior.

With clock node dts conversion, we get the following warnings before
system hangs as a result and 3630 based platforms fails to boot
(uart4 clocks are only present in OMAP3630 and not present in
OMAP3430):

...
omap_hwmod: uart4: cannot clk_get main_clk uart4_fck
omap_hwmod: uart4: cannot _init_clocks

WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434
_init+0x6c/0x80()
omap_hwmod: uart4: couldn't init clocks
...

WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126
_enable+0x254/0x280()
omap_hwmod: timer12: enabled state can only be entered from
initialized, idle, or disabled state
...

WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224
_idle+0xd4/0xf8()
omap_hwmod: timer12: idle state can only be entered from enabled state

WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126
_enable+0x254/0x280()
omap_hwmod: uart4: enabled state can only be entered from
initialized, idle, or disabled state

So, add specific compatiblity for 3630 to allow match for Beagle-XM
platform.

Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: left out ti,omap343x, updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
8 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 8 Oct 2013 16:23:12 +0000 (09:23 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Various fixlets:

  On the kernel side:

   - fix a race
   - fix a bug in the handling of the perf ring-buffer data page

  On the tooling side:

   - fix the handling of certain corrupted perf.data files
   - fix a bug in 'perf probe'
   - fix a bug in 'perf record + perf sched'
   - fix a bug in 'make install'
   - fix a bug in libaudit feature-detection on certain distros"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf session: Fix infinite loop on invalid perf.data file
  perf tools: Fix installation of libexec components
  perf probe: Fix to find line information for probe list
  perf tools: Fix libaudit test
  perf stat: Set child_pid after perf_evlist__prepare_workload()
  perf tools: Add default handler for mmap2 events
  perf/x86: Clean up cap_user_time* setting
  perf: Fix perf_pmu_migrate_context

8 years agoALSA: hda - hdmi: Fix channel map switch not taking effect
Anssi Hannula [Mon, 7 Oct 2013 16:24:52 +0000 (19:24 +0300)]
ALSA: hda - hdmi: Fix channel map switch not taking effect

Currently hdmi_setup_audio_infoframe() reprograms the HDA channel
mapping only when the infoframe is not up-to-date or the non-PCM flag
has changed.

However, when just the channel map has been changed, the infoframe may
still be up-to-date and non-PCM flag may not have changed, so the new
channel map is not actually programmed into the HDA codec.

Notably, this failing case is also always triggered when the device is
already in a prepared state and a new channel map is configured while
changing only the channel positions (for example, plain
"speaker-test -c2 -m FR,FL").

Fix that by always programming the channel map in
hdmi_setup_audio_infoframe(). Tested on Intel HDMI.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agodrm/nouveau/mc: disable msi support by default, it's busted in tons of places
Ben Skeggs [Tue, 8 Oct 2013 06:23:36 +0000 (16:23 +1000)]
drm/nouveau/mc: disable msi support by default, it's busted in tons of places

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
8 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Tue, 8 Oct 2013 05:29:09 +0000 (07:29 +0200)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 * The libaudit test was failing in some systems due to a unescaped newline, fix
   it so that the 'trace' tool can be built in such systems.

 * Fix installation of libexec components.

 * Add default handler for mmap2 events so that tools that don't explicitely
   define an MMAP2 handler don't crash, fix from David Ahern.

 * Fix to find line information for probe list, from Masami Hiramatsu.

 * Set child_pid after perf_evlist__prepare_workload(), fix from Namhyung Kim.

 * Fix infinite loop on invalid perf.data file, from Namhyung Kim.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agopowerpc/irq: Don't switch to irq stack from softirq stack
Benjamin Herrenschmidt [Mon, 7 Oct 2013 21:08:24 +0000 (08:08 +1100)]
powerpc/irq: Don't switch to irq stack from softirq stack

irq_exit() is now called on the irq stack, which can trigger a switch to
the softirq stack from the irq stack.  If an interrupt happens at that
point, we will not properly detect the re-entrancy and clobber the
original return context on the irq stack.

This fixes it.  The side effect is to prevent all nesting from softirq
stack to irq stack even in the "safe" case but it's simpler that way and
matches what x86_64 does.

Reported-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>