11 years agofirmware: Refer to the co-maintained linux-firmware.git repository
Ben Hutchings [Wed, 21 Dec 2011 03:54:24 +0000 (03:54 +0000)]
firmware: Refer to the co-maintained linux-firmware.git repository

David and I are sharing maintenance of this repository.  Patches
should be sent to both of us.

Signed-off-by: Ben Hutchings <>
Signed-off-by: Linus Torvalds <>
11 years agoMerge git://
Linus Torvalds [Wed, 21 Dec 2011 02:39:37 +0000 (18:39 -0800)]
Merge git://

* git://
  mtd: plat_ram: call mtd_device_register only if partition data exists
  mtd: pxa2xx-flash.c: It used to fall back to provided table.
  mtd: gpmi: add missing include 'module.h'
  mtd: ndfc: fix typo in structure dereference

11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Wed, 21 Dec 2011 02:31:34 +0000 (18:31 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://
  mmc: vub300: fix type of firmware_rom_wait_states module parameter
  Revert "mmc: enable runtime PM by default"
  mmc: sdhci: remove "state" argument from sdhci_suspend_host

11 years agoSELinux: Fix RCU deref check warning in sel_netport_insert()
David Howells [Tue, 13 Dec 2011 14:49:04 +0000 (14:49 +0000)]
SELinux: Fix RCU deref check warning in sel_netport_insert()

Fix the following bug in sel_netport_insert() where rcu_dereference() should
be rcu_dereference_protected() as sel_netport_lock is held.

[ INFO: suspicious rcu_dereference_check() usage. ]
security/selinux/netport.c:127 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by ossec-rootcheck/3323:
 #0:  (sel_netport_lock){+.....}, at: [<ffffffff8117d775>] sel_netport_sid+0xbb/0x226

stack backtrace:
Pid: 3323, comm: ossec-rootcheck Not tainted 3.1.0-rc8-fsdevel+ #1095
Call Trace:
 [<ffffffff8105cfb7>] lockdep_rcu_dereference+0xa7/0xb0
 [<ffffffff8117d871>] sel_netport_sid+0x1b7/0x226
 [<ffffffff8117d6ba>] ? sel_netport_avc_callback+0xbc/0xbc
 [<ffffffff8117556c>] selinux_socket_bind+0x115/0x230
 [<ffffffff810a5388>] ? might_fault+0x4e/0x9e
 [<ffffffff810a53d1>] ? might_fault+0x97/0x9e
 [<ffffffff81171cf4>] security_socket_bind+0x11/0x13
 [<ffffffff812ba967>] sys_bind+0x56/0x95
 [<ffffffff81380dac>] ? sysret_check+0x27/0x62
 [<ffffffff8105b767>] ? trace_hardirqs_on_caller+0x11e/0x155
 [<ffffffff81076fcd>] ? audit_syscall_entry+0x17b/0x1ae
 [<ffffffff811b5eae>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff81380d7b>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <>
Acked-by: Paul Moore <>
Acked-by: Eric Dumazet <>
Signed-off-by: James Morris <>
11 years agoMerge branch 'evm-fixes' of git://
James Morris [Wed, 21 Dec 2011 00:28:16 +0000 (11:28 +1100)]
Merge branch 'evm-fixes' of git://git./linux/kernel/git/kasatkin/linux-digsig into for-linus

11 years agoMerge branch 'for-3.2-fixes' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:44:18 +0000 (11:44 -0800)]
Merge branch 'for-3.2-fixes' of git://git./linux/kernel/git/tj/cgroup

* 'for-3.2-fixes' of git://
  cgroups: fix a css_set not found bug in cgroup_attach_proc

11 years agoMerge branch 'x86-urgent-for-linus' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:43:08 +0000 (11:43 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'x86-urgent-for-linus' of git://
  x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT

11 years agoMerge branch 'timers-urgent-for-linus' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:42:38 +0000 (11:42 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'timers-urgent-for-linus' of git://
  time/clocksource: Fix kernel-doc warnings
  rtc: m41t80: Workaround broken alarm functionality
  rtc: Expire alarms after the time is set.

11 years agoMerge branch 'perf-urgent-for-linus' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:41:17 +0000 (11:41 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'perf-urgent-for-linus' of git://
  oprofile: Fix uninitialized memory access when writing to writing to oprofilefs

11 years agoMerge branch 'stable/for-linus-fixes-3.2' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:40:48 +0000 (11:40 -0800)]
Merge branch 'stable/for-linus-fixes-3.2' of git://git./linux/kernel/git/konrad/xen

* 'stable/for-linus-fixes-3.2' of git://
  Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"

11 years agoMerge branch 'sh-fixes-for-linus' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:39:21 +0000 (11:39 -0800)]
Merge branch 'sh-fixes-for-linus' of git://

* 'sh-fixes-for-linus' of git://
  sh: fix build warning in board-sh7757lcr

11 years agoMerge branch 'rmobile-fixes-for-linus' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:32:18 +0000 (11:32 -0800)]
Merge branch 'rmobile-fixes-for-linus' of git://

* 'rmobile-fixes-for-linus' of git://
  ARM: mach-shmobile: SH73A0 external Ethernet fix
  ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix
  ARM: mach-shmobile: Kota2 TPU LED platform data
  ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix
  ARM: mach-shmobile: Kota2 PINT fix

11 years agoMerge branch 'bugfixes' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:31:56 +0000 (11:31 -0800)]
Merge branch 'bugfixes' of git://

* 'bugfixes' of git://
  NFS: Fix a regression in nfs_file_llseek()
  NFSv4: Do not accept delegated opens when a delegation recall is in effect
  NFSv4: Ensure correct locking when accessing the 'lock_states' list
  NFSv4.1: Ensure that we handle _all_ SEQUENCE status bits.
  NFSv4: Don't error if we handled it in nfs4_recovery_handle_error
  SUNRPC: Ensure we always bump the backlog queue in xprt_free_slot
  SUNRPC: Fix the execution time statistics in the face of RPC restarts

11 years agoMerge branch 'drm-fixes' of git://
Linus Torvalds [Tue, 20 Dec 2011 19:31:44 +0000 (11:31 -0800)]
Merge branch 'drm-fixes' of git://

* 'drm-fixes' of git://
  vmwgfx: Clip cliprects against screen boundaries in present and dirty
  vmwgfx: Resend the cursor after legacy modeset
  vmwgfx: Do better culling of presents
  vmwgfx: Refactor kms code to use vmw_user_lookup_handle helper
  vmwgfx: Add helper function to get surface or dmabuf
  vmwgfx: Refactor cursor update
  vmwgfx: Remove dmabuf check in present ioctl
  vmwgfx: Use the revised fifo hw version register when present

11 years agoMerge branch 'v4l_for_linus' of git://
Linus Torvalds [Tue, 20 Dec 2011 18:49:39 +0000 (10:49 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media

* 'v4l_for_linus' of git:// (31 commits)
  Revert "[media] af9015: limit I2C access to keep FW happy"
  [media] s5p-fimc: Fix camera input configuration in subdev operations
  [media] m5mols: Fix logic in sanity check
  [media] ati_remote: switch to single-byte scancodes
  [media] V4L: mt9m111: fix uninitialised mutex
  [media] V4L: omap1_camera: fix missing <linux/module.h> include
  [media] V4L: mt9t112: use after free in mt9t112_probe()
  [media] V4L: soc-camera: fix compiler warnings on 64-bit platforms
  [media] s5p_mfc_enc: fix s/H264/H263/ typo
  [media] omap_vout: Fix compile error in 3.1
  [media] au0828: add missing models 72101, 72201 & 72261 to the model matrix
  [media] au0828: add missing USB ID 2040:7213
  [media] au0828: add missing USB ID 2040:7260
  [media] [trivial] omap24xxcam-dma: Fix logical test
  [media] omap_vout: fix crash if no driver for a display
  [media] media: video: s5p-tv: fix build break
  [media] omap3isp: fix compilation of ispvideo.c
  [media] m5mols: Fix set_fmt to return proper pixel format code
  [media] s5p-fimc: Use correct fourcc for RGB565 colour format
  [media] s5p-fimc: Fail driver probing when sensor configuration is wrong

11 years agobinary_sysctl(): fix memory leak
Michel Lespinasse [Tue, 20 Dec 2011 01:12:06 +0000 (17:12 -0800)]
binary_sysctl(): fix memory leak

binary_sysctl() calls sysctl_getname() which allocates from names_cache
slab usin __getname()

The matching function to free the name is __putname(), and not putname()
which should be used only to match getname() allocations.

This is because when auditing is enabled, putname() calls audit_putname
*instead* (not in addition) to __putname().  Then, if a syscall is in
progress, audit_putname does not release the name - instead, it expects
the name to get released when the syscall completes, but that will happen
only if audit_getname() was called previously, i.e.  if the name was
allocated with getname() rather than the naked __getname().  So,
__getname() followed by putname() ends up leaking memory.

Signed-off-by: Michel Lespinasse <>
Acked-by: Al Viro <>
Cc: Christoph Hellwig <>
Cc: Eric Paris <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
11 years agomm/vmalloc.c: remove static declaration of va from __get_vm_area_node
Kautuk Consul [Tue, 20 Dec 2011 01:12:04 +0000 (17:12 -0800)]
mm/vmalloc.c: remove static declaration of va from __get_vm_area_node

Static storage is not required for the struct vmap_area in

Removing "static" to store this variable on the stack instead.

Signed-off-by: Kautuk Consul <>
Acked-by: David Rientjes <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
11 years agoipmi_watchdog: restore settings when BMC reset
Corey Minyard [Tue, 20 Dec 2011 01:12:02 +0000 (17:12 -0800)]
ipmi_watchdog: restore settings when BMC reset

If the BMC gets reset, it will return 0x80 response errors.

In less than a week
# grep "Error 80 on cmd 22" /var/log/kernel |wc -l

In this case, it is probably a good idea to restore the IPMI settings.

Signed-off-by: Corey Minyard <>
Tested-by: Arkadiusz Miśkiewicz <>
Reported-by: Arkadiusz Miśkiewicz <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
11 years agooom: fix integer overflow of points in oom_badness
Frantisek Hrbata [Tue, 20 Dec 2011 01:11:59 +0000 (17:11 -0800)]
oom: fix integer overflow of points in oom_badness

An integer overflow will happen on 64bit archs if task's sum of rss,
swapents and nr_ptes exceeds (2^31)/1000 value.  This was introduced by

f755a04 oom: use pte pages in OOM score

where the oom score computation was divided into several steps and it's no
longer computed as one expression in unsigned long(rss, swapents, nr_pte
are unsigned long), where the result value assigned to points(int) is in
range(1..1000).  So there could be an int overflow while computing

176          points *= 1000;

and points may have negative value. Meaning the oom score for a mem hog task
will be one.

196          if (points <= 0)
197                  return 1;

For example:
[ 3366]     0  3366 35390480 24303939   5       0             0 oom01
Out of memory: Kill process 3366 (oom01) score 1 or sacrifice child

Here the oom1 process consumes more than 24303939(rss)*4096~=92GB physical
memory, but it's oom score is one.

In this situation the mem hog task is skipped and oom killer kills another and
most probably innocent task with oom score greater than one.

The points variable should be of type long instead of int to prevent the
int overflow.

Signed-off-by: Frantisek Hrbata <>
Acked-by: KOSAKI Motohiro <>
Acked-by: Oleg Nesterov <>
Acked-by: David Rientjes <>
Cc: <> [2.6.36+]
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
11 years agomemcg: keep root group unchanged if creation fails
Hillf Danton [Tue, 20 Dec 2011 01:11:57 +0000 (17:11 -0800)]
memcg: keep root group unchanged if creation fails

If the request is to create non-root group and we fail to meet it, we
should leave the root unchanged.

Signed-off-by: Hillf Danton <>
Acked-by: Hugh Dickins <>
Acked-by: KAMEZAWA Hiroyuki <>
Acked-by: Michal Hocko <>
Cc: Balbir Singh <>
Cc: David Rientjes <>
Cc: Andrea Arcangeli <>
Cc: Johannes Weiner <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
11 years agonilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
Haogang Chen [Tue, 20 Dec 2011 01:11:56 +0000 (17:11 -0800)]
nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()

There is a potential integer overflow in nilfs_ioctl_clean_segments().
When a large argv[n].v_nmembs is passed from the userspace, the subsequent
call to vmalloc() will allocate a buffer smaller than expected, which
leads to out-of-bound access in nilfs_ioctl_move_blocks() and

The following check does not prevent the overflow because nsegs is also
controlled by the userspace and could be very large.

if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment)
goto out_free;

This patch clamps argv[n].v_nmembs to UINT_MAX / argv[n].v_size, and
returns -EINVAL when overflow.

Signed-off-by: Haogang Chen <>
Signed-off-by: Ryusuke Konishi <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
11 years agonilfs2: unbreak compat ioctl
Thomas Meyer [Tue, 20 Dec 2011 01:11:55 +0000 (17:11 -0800)]
nilfs2: unbreak compat ioctl

commit 828b1c50ae ("nilfs2: add compat ioctl") incidentally broke all
other NILFS compat ioctls.  Make them work again.

Signed-off-by: Thomas Meyer <>
Signed-off-by: Ryusuke Konishi <>
Tested-by: Ryusuke Konishi <>
Cc: <> [3.0+]
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
11 years agocpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
David Rientjes [Tue, 20 Dec 2011 01:11:52 +0000 (17:11 -0800)]
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask

Kernels where MAX_NUMNODES > BITS_PER_LONG may temporarily see an empty
nodemask in a tsk's mempolicy if its previous nodemask is remapped onto a
new set of allowed cpuset nodes where the two nodemasks, as a result of
the remap, are now disjoint.

c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing
cpuset's mems") adds get_mems_allowed() to prevent the set of allowed
nodes from changing for a thread.  This causes any update to a set of
allowed nodes to stall until put_mems_allowed() is called.

This stall is unncessary, however, if at least one node remains unchanged
in the update to the set of allowed nodes.  This was addressed by
89e8a244b97e ("cpusets: avoid looping when storing to mems_allowed if one
node remains set"), but it's still possible that an empty nodemask may be
read from a mempolicy because the old nodemask may be remapped to the new
nodemask during rebind.  To prevent this, only avoid the stall if there is
no mempolicy for the thread being changed.

This is a temporary solution until all reads from mempolicy nodemasks can
be guaranteed to not be empty without the get_mems_allowed()

Also moves the check for nodemask intersection inside task_lock() so that
tsk->mems_allowed cannot change.  This ensures that nothing can set this
tsk's mems_allowed out from under us and also protects tsk->mempolicy.

Reported-by: Miao Xie <>
Signed-off-by: David Rientjes <>
Cc: KOSAKI Motohiro <>
Cc: Paul Menage <>
Cc: Stephen Rothwell <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
11 years agoevm: prevent racing during tfm allocation
Dmitry Kasatkin [Mon, 5 Dec 2011 11:17:42 +0000 (13:17 +0200)]
evm: prevent racing during tfm allocation

There is a small chance of racing during tfm allocation.
This patch fixes it.

Signed-off-by: Dmitry Kasatkin <>
Acked-by: Mimi Zohar <>
Signed-off-by: James Morris <>
11 years agoevm: key must be set once during initialization
Dmitry Kasatkin [Mon, 5 Dec 2011 11:17:41 +0000 (13:17 +0200)]
evm: key must be set once during initialization

On multi-core systems, setting of the key before every caclculation,
causes invalid HMAC calculation for other tfm users, because internal
state (ipad, opad) can be invalid before set key call returns.
It needs to be set only once during initialization.

Signed-off-by: Dmitry Kasatkin <>
Acked-by: Mimi Zohar <>
Signed-off-by: James Morris <>
11 years agommc: vub300: fix type of firmware_rom_wait_states module parameter
Rusty Russell [Thu, 15 Dec 2011 03:04:50 +0000 (13:34 +1030)]
mmc: vub300: fix type of firmware_rom_wait_states module parameter

You didn't mean this to be a bool.

Signed-off-by: Rusty Russell <>
Acked-by: Tony Olech <>
Cc: <>
Signed-off-by: Chris Ball <>
11 years agoRevert "mmc: enable runtime PM by default"
Ohad Ben-Cohen [Mon, 19 Dec 2011 23:51:38 +0000 (15:51 -0800)]
Revert "mmc: enable runtime PM by default"

When SDIO runtime PM was originally introduced, we immediately faced
two regressions with two different chipsets, and in response decided
not to enable it by default.

With the recent work on the 8686 we hoped we found all the gotchas,
so 08da834 did make sense (at least experimentally).

Unfortunately we now see that some setups out there still refuse to
work when SDIO runtime PM is enabled by default (see, and obviously
we can't live with these kind of regressions.

This reverts commit 08da834a24312157f512224691ad1fddd11c1073.

Signed-off-by: Ohad Ben-Cohen <>
Cc: Daniel Drake <>
Signed-off-by: Chris Ball <>
11 years agommc: sdhci: remove "state" argument from sdhci_suspend_host
Manuel Lauss [Thu, 3 Nov 2011 10:09:45 +0000 (11:09 +0100)]
mmc: sdhci: remove "state" argument from sdhci_suspend_host

Drop the "state" argument from sdhci_suspend_host.  Its only user is the
PCI glue;  this allows to move all SDHCI glues to use dev_pm_ops instead.

Signed-off-by: Manuel Lauss <>
Acked-by: Adrian Hunter <>
Signed-off-by: Chris Ball <>
11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Mon, 19 Dec 2011 23:13:53 +0000 (15:13 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://
  IB/qib: Correct sense on freectxts increment and decrement
  RDMA/cma: Verify private data length
  IB/mlx4: Fix shutdown crash accessing a non-existent bitmap

11 years agoMerge branch 'for-3.2-fixes' of git://
Linus Torvalds [Mon, 19 Dec 2011 23:13:36 +0000 (15:13 -0800)]
Merge branch 'for-3.2-fixes' of git://git./linux/kernel/git/tj/percpu

* 'for-3.2-fixes' of git://
  percpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses

11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Mon, 19 Dec 2011 23:11:12 +0000 (15:11 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://
  Input: synaptics - fix touchpad not working after S2R on Vostro V13
  Input: cma3000_d0x - fix signedness bug in cma3000_thread_irq()
  Input: wacom - add product id used by Samsung Slate 7

11 years agox86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
Clemens Ladisch [Mon, 19 Dec 2011 21:07:58 +0000 (22:07 +0100)]
x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT

When printing the code bytes in show_registers(), the markers around the
byte at the fault address could make the printk() format string look
like a valid log level and facility code.  This would prevent this byte
from being printed and result in a spurious newline:

[ 7555.765589] Code: 8b 32 e9 94 00 00 00 81 7d 00 ff 00 00 00 0f 87 96 00 00 00 48 8b 83 c0 00 00 00 44 89 e2 44 89 e6 48 89 df 48 8b 80 d8 02 00 00
[ 7555.765683]  8b 48 28 48 89 d0 81 e2 ff 0f 00 00 48 c1 e8 0c 48 c1 e0 04

Add KERN_CONT where needed, and elsewhere in show_registers() for

Signed-off-by: Clemens Ladisch <>
Signed-off-by: H. Peter Anvin <>
11 years agoMerge branches 'cma', 'mlx4' and 'qib' into for-next
Roland Dreier [Mon, 19 Dec 2011 17:19:49 +0000 (09:19 -0800)]
Merge branches 'cma', 'mlx4' and 'qib' into for-next

11 years agoIB/qib: Correct sense on freectxts increment and decrement
Mike Marciniszyn [Fri, 2 Dec 2011 17:41:30 +0000 (12:41 -0500)]
IB/qib: Correct sense on freectxts increment and decrement

Commit 53ab1c64983 ("IB/qib: Correct nfreectxts for multiple HCAs")
reversed the increments and decrements of dd->nfreectxts.  Fix it.

Reviewed-by: Ram Vepa <>
Signed-off-by: Mike Marciniszyn <>
Signed-off-by: Roland Dreier <>
11 years agoRDMA/cma: Verify private data length
Sean Hefty [Tue, 6 Dec 2011 21:17:11 +0000 (21:17 +0000)]
RDMA/cma: Verify private data length

private_data_len is defined as a u8.  If the user specifies a large
private_data size (> 220 bytes), we will calculate a total length that
exceeds 255, resulting in private_data_len wrapping back to 0.  This
can lead to overwriting random kernel memory.  Avoid this by verifying
that the resulting size fits into a u8.

Reported-by: B. Thery <>
Addresses: <>
Signed-off-by: Sean Hefty <>
Signed-off-by: Roland Dreier <>
11 years agocgroups: fix a css_set not found bug in cgroup_attach_proc
Mandeep Singh Baines [Thu, 15 Dec 2011 19:36:43 +0000 (11:36 -0800)]
cgroups: fix a css_set not found bug in cgroup_attach_proc

There is a BUG when migrating a PF_EXITING proc. Since css_set_prefetch()
is not called for the PF_EXITING case, find_existing_css_set() will return
NULL inside cgroup_task_migrate() causing a BUG.

This bug is easy to reproduce. Create a zombie and echo its pid to

$ cat zombie.c
\#include <unistd.h>

int main()
  if (fork())
  return 0;

We are hitting this bug pretty regularly on ChromeOS.

This bug is already fixed by Tejun Heo's cgroup patchset which is
targetted for the next merge window:

I've create a smaller patch here which just fixes this bug so that a
fix can be merged into the current release and stable.

Signed-off-by: Mandeep Singh Baines <>
Reviewed-by: Li Zefan <>
Signed-off-by: Tejun Heo <>
Cc: KAMEZAWA Hiroyuki <>
Cc: Frederic Weisbecker <>
Cc: Oleg Nesterov <>
Cc: Andrew Morton <>
Cc: Paul Menage <>
Cc: Olof Johansson <>
11 years agooprofile: Fix uninitialized memory access when writing to writing to oprofilefs
Robert Richter [Mon, 19 Dec 2011 15:38:30 +0000 (16:38 +0100)]
oprofile: Fix uninitialized memory access when writing to writing to oprofilefs

If oprofilefs_ulong_from_user() is called with count equals
zero, *val remains unchanged. Depending on the implementation it
might be uninitialized.

Change oprofilefs_ulong_from_user()'s interface to return count
on success. Thus, we are able to return early if count equals
zero which avoids using *val uninitialized. Fixing all users of
oprofilefs_ulong_ from_user().

This follows write syscall implementation when count is zero:
"If count is zero ... [and if] no errors are detected, 0 will be
returned without causing any other effect." (man 2 write)

Reported-By: Mike Waychison <>
Signed-off-by: Robert Richter <>
Cc: Andrew Morton <>
Cc: <>
Cc: oprofile-list <>
Signed-off-by: Ingo Molnar <>
11 years agoRevert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
Konrad Rzeszutek Wilk [Mon, 19 Dec 2011 14:30:35 +0000 (09:30 -0500)]
Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"

This reverts commit ddacf5ef684a655abe2bb50c4b2a5b72ae0d5e05.
As when booting the kernel under Amazon EC2 as an HVM guest it ends up
hanging during startup. Reverting this we loose the fix for kexec
booting to the crash kernels.

Fixes Canonical BZ #901305 (

Tested-by: Alessandro Salvatori <>
Reported-by: Stefan Bader <>
Acked-by: Ian Campbell <>
Signed-off-by: Konrad Rzeszutek Wilk <>
11 years agovmwgfx: Clip cliprects against screen boundaries in present and dirty
Jakob Bornecrantz [Mon, 28 Nov 2011 12:19:15 +0000 (13:19 +0100)]
vmwgfx: Clip cliprects against screen boundaries in present and dirty

Signed-off-by: Jakob Bornecrantz <>
Reviewed-by: Thomas Hellstrom <>
Signed-off-by: Dave Airlie <>
11 years agovmwgfx: Resend the cursor after legacy modeset
Jakob Bornecrantz [Mon, 28 Nov 2011 12:19:14 +0000 (13:19 +0100)]
vmwgfx: Resend the cursor after legacy modeset

Signed-off-by: Jakob Bornecrantz <>
Reviewed-by: Thomas Hellstrom <>
Signed-off-by: Dave Airlie <>
11 years agovmwgfx: Do better culling of presents
Jakob Bornecrantz [Mon, 28 Nov 2011 12:19:13 +0000 (13:19 +0100)]
vmwgfx: Do better culling of presents

Signed-off-by: Jakob Bornecrantz <>
Reviewed-by: Thomas Hellstrom <>
Signed-off-by: Dave Airlie <>
11 years agovmwgfx: Refactor kms code to use vmw_user_lookup_handle helper
Jakob Bornecrantz [Mon, 28 Nov 2011 12:19:12 +0000 (13:19 +0100)]
vmwgfx: Refactor kms code to use vmw_user_lookup_handle helper

Signed-off-by: Jakob Bornecrantz <>
Signed-off-by: Thomas Hellstrom <>
Signed-off-by: Dave Airlie <>
11 years agovmwgfx: Add helper function to get surface or dmabuf
Jakob Bornecrantz [Mon, 28 Nov 2011 12:19:11 +0000 (13:19 +0100)]
vmwgfx: Add helper function to get surface or dmabuf

Signed-off-by: Jakob Bornecrantz <>
Reviewed-by: Thomas Hellstrom <>
Signed-off-by: Dave Airlie <>
11 years agovmwgfx: Refactor cursor update
Jakob Bornecrantz [Mon, 28 Nov 2011 12:19:10 +0000 (13:19 +0100)]
vmwgfx: Refactor cursor update

Signed-off-by: Jakob Bornecrantz <>
Reviewed-by: Thomas Hellstrom <>
Signed-off-by: Dave Airlie <>
11 years agovmwgfx: Remove dmabuf check in present ioctl
Jakob Bornecrantz [Mon, 28 Nov 2011 12:19:09 +0000 (13:19 +0100)]
vmwgfx: Remove dmabuf check in present ioctl

Doesn't protect any error code and only gets in the way of debugging.

Signed-off-by: Jakob Bornecrantz <>
Reviewed-by: Thomas Hellstrom <>
Signed-off-by: Dave Airlie <>
11 years agovmwgfx: Use the revised fifo hw version register when present
Thomas Hellstrom [Mon, 28 Nov 2011 12:19:08 +0000 (13:19 +0100)]
vmwgfx: Use the revised fifo hw version register when present

The driver implements the needed resource management required
to use that register.

Signed-off-by: Thomas Hellstrom <>
Reviewed-by: Jakob Bornecrantz <>
Signed-off-by: Dave Airlie <>
11 years agomtd: plat_ram: call mtd_device_register only if partition data exists
Ilya Yanok [Mon, 12 Dec 2011 23:37:56 +0000 (00:37 +0100)]
mtd: plat_ram: call mtd_device_register only if partition data exists

mtd_device_parse_register() registers the device as a whole if no
partition data is passed so there is no reason to call
mtd_device_register() after that.

Signed-off-by: Ilya Yanok <>
Signed-off-by: Artem Bityutskiy <>
Signed-off-by: David Woodhouse <>
11 years agotime/clocksource: Fix kernel-doc warnings
Kusanagi Kouichi [Mon, 19 Dec 2011 09:13:19 +0000 (18:13 +0900)]
time/clocksource: Fix kernel-doc warnings

Fix various KernelDoc build warnings.

Signed-off-by: Kusanagi Kouichi <>
Cc: John Stultz <>
Signed-off-by: Ingo Molnar <>
11 years agoMerge git://
Linus Torvalds [Sun, 18 Dec 2011 22:28:31 +0000 (14:28 -0800)]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git:// (22 commits)
  [SCSI] fcoe: fix fcoe in a DCB environment by adding DCB notifiers to set skb priority
  [SCSI] bnx2i: Fixed kernel panic caused by unprotected task->sc->request deref
  [SCSI] qla4xxx: check for failed conn setup
  [SCSI] qla4xxx: a small loop fix
  [SCSI] qla4xxx: fix flash/ddb support
  [SCSI] zfcp: return early from slave_destroy if slave_alloc returned early
  [SCSI] fcoe: Fix preempt count leak in fcoe_filter_frames()
  [SCSI] qla2xxx: Update version number to
  [SCSI] qla2xxx: Submit all chained IOCBs for passthrough commands on request queue 0.
  [SCSI] qla2xxx: Correct fc_host port_state display.
  [SCSI] qla2xxx: Disable generating pause frames when firmware hang detected for ISP82xx.
  [SCSI] qla2xxx: Clear mailbox busy flag during premature mailbox completion for ISP82xx.
  [SCSI] qla2xxx: Encapsulate prematurely completing mailbox commands during ISP82xx firmware hang.
  [SCSI] qla2xxx: Display IPE error message for ISP82xx.
  [SCSI] qla2xxx: Return the correct value for a mailbox command if 82xx is in reset recovery.
  [SCSI] qla2xxx: Enable Minidump by default with default capture mask 0x1f.
  [SCSI] qla2xxx: Stop unconditional completion of mailbox commands issued in interrupt mode during firmware hang.
  [SCSI] qla2xxx: Revert back the request queue mapping to request queue 0.
  [SCSI] qla2xxx: Don't call alloc_fw_dump for ISP82XX.
  [SCSI] qla2xxx: Check for SCSI status on underruns.

11 years agoMerge branch 'for-linus/i2c-32-rc6' of git://
Linus Torvalds [Sun, 18 Dec 2011 22:14:46 +0000 (14:14 -0800)]
Merge branch 'for-linus/i2c-32-rc6' of git://

* 'for-linus/i2c-32-rc6' of git://
  i2c-eg20t: correct the driver init order of pch_i2c_probe()
  I2C: OMAP: fix FIFO usage for OMAP4
  i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio
  i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle

11 years agopci: Fix hotplug of Express Module with pci bridges
Yinghai Lu [Sun, 18 Dec 2011 02:33:37 +0000 (18:33 -0800)]
pci: Fix hotplug of Express Module with pci bridges

I noticed that hotplug of one setup does not work with recent change in
pci tree.

After checking the bridge conf setup, I noticed that the bridges get
assigned but do not get enabled.

The reason is the following commit, while simply ignores bridge
resources when enabling a pci device:

| commit bbef98ab0f019f1b0c25c1acdf1683c68933d41b
| Author: Ram Pai <>
| Date:   Sun Nov 6 10:33:10 2011 +0800
|    PCI: defer enablement of SRIOV BARS
|    NOTE: Note, there is subtle change in the pci_enable_device() API.  Any
|    driver that depends on SRIOV BARS to be enabled in pci_enable_device()
|    can fail.

Put back bridge resource and ROM resource checking to fix the problem.

That should fix regression like BIOS does not assign correct resource to

Discussion can be found at:

Signed-off-by: Yinghai Lu <>
Acked-by: Jesse Barnes <>
Signed-off-by: Linus Torvalds <>
11 years agoi2c-eg20t: correct the driver init order of pch_i2c_probe()
Feng Tang [Tue, 29 Nov 2011 07:19:10 +0000 (15:19 +0800)]
i2c-eg20t: correct the driver init order of pch_i2c_probe()

Before registering an adapter to i2c subsystem, we need make sure
driver is ready for incoming i2c xfer, becasue the i2c_add_adapter()
may trigger a i2c device driver's proble function which may start
some real i2c xfer. I met this issue when integrating a TSC2007 i2c
touch screen device with the i2c-eg20t driver.

This patch will call request_irq() and hw init before calling

Signed-off-by: Feng Tang <>
Signed-off-by: Ben Dooks <>
11 years agoI2C: OMAP: fix FIFO usage for OMAP4
Shubhrajyoti D [Tue, 6 Dec 2011 18:25:58 +0000 (10:25 -0800)]
I2C: OMAP: fix FIFO usage for OMAP4

Currently the fifo depth is set to zero for OMAP4 which disables
the FIFO usage. This patch enables the FIFO usage for I2C transactions
on OMAP4 also.

Tested on omap4430 and 3430.

Tested-and-Reported-by: Nishanth Menon <>
Signed-off-by: Shubhrajyoti D <>
Signed-off-by: Kevin Hilman <>
Signed-off-by: Ben Dooks <>
11 years agoi2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio
Tushar Behera [Fri, 9 Dec 2011 10:03:55 +0000 (15:33 +0530)]
i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio

s3c24xx_i2c_parse_dt_gpio is called when cfg_gpio is not defined
in the platform data of the i2c device. When DT is not enabled,
the above function always returns -EINVAL. Since there can be
some i2c devices which don't need to configure any gpio lines,
the probe of such devices would fail here. Changing the default
return value to success would fix this issue.

Signed-off-by: Tushar Behera <>
Signed-off-by: Ben Dooks <>
11 years agoi2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle
Mark Brown [Fri, 9 Dec 2011 12:55:03 +0000 (20:55 +0800)]
i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle

Be a bit more friendly.

Signed-off-by: Mark Brown <>
Signed-off-by: Ben Dooks <>
11 years agoMerge branches 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git...
Linus Torvalds [Sat, 17 Dec 2011 22:03:50 +0000 (14:03 -0800)]
Merge branches 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'perf-urgent-for-linus' of git://
  perf events: Fix ring_buffer_wakeup() brown paperbag bug

* 'sched-urgent-for-linus' of git://
  sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling
  MAINTAINERS: Update tip.git related git trees

11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Sat, 17 Dec 2011 18:40:51 +0000 (10:40 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci

* 'for-linus' of git://
  PCI: Set device power state to PCI_D0 for device without native PM support
  PCI hotplug: Always allow acpiphp to handle non-PCIe bridges
  PCI: fix ats compile failure
  PCI: defer enablement of SRIOV BARS

11 years agoLinux 3.2-rc6 v3.2-rc6
Linus Torvalds [Sat, 17 Dec 2011 02:36:26 +0000 (18:36 -0800)]
Linux 3.2-rc6

11 years agoRevert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a"
Linus Torvalds [Fri, 16 Dec 2011 20:58:39 +0000 (12:58 -0800)]
Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a"

This reverts commit eb1711bb94991e93669c5a1b5f84f11be2d51ea1.

It blows up the i915 seqno tracking, resulting in the

BUG_ON(seqno == 0);

in i915_wait_request() triggering, which will cause lock-ups.

See for example

Reported-requested-and-tested-by: Dirk Hohndel <>
Reported-by: Richard Eames <>
Reported-by: Rocko Requin <>
Acked-by: Daniel Vetter <>
Cc: Dave Airlie <>
Cc: Chris Wilson <>
Cc: Keith Packard <>
Cc: Eric Anholt <>
Signed-off-by: Linus Torvalds <>
11 years agoMerge git://
Linus Torvalds [Fri, 16 Dec 2011 20:26:26 +0000 (12:26 -0800)]
Merge git://git./linux/kernel/git/davem/sparc

* git://
  sparc32: Be less strict in matching %lo part of relocation.
  sbus: convert drivers/sbus/char/* to use module_platform_driver()
  bbc_i2c: Remove unneeded err variable
  sparc: Use kmemdup rather than duplicating its implementation

11 years agoMerge git://
Linus Torvalds [Fri, 16 Dec 2011 20:17:32 +0000 (12:17 -0800)]
Merge git://git./linux/kernel/git/davem/net

* git://
  ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow().
  sch_gred: should not use GFP_KERNEL while holding a spinlock
  ipip, sit: copy after register_netdevice
  ipv6: Fix for adding multicast route for loopback device automatically.
  ssb: fix init regression with SoCs
  rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition
  mac80211: fix another race in aggregation start
  fsl_pq_mdio: Clean up tbi address configuration
  ppp: fix pptp double release_sock in pptp_bind()
  net/fec: fix the use of pdev->id
  ath9k: fix check for antenna diversity support
  batman-adv: delete global entry in case of roaming
  batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM
  Bluetooth: Correct version check in hci_setup
  btusb: fix a memory leak in btusb_send_frame()
  Bluetooth: bnep: Fix module reference
  Bluetooth: cmtp: Fix module reference
  Bluetooth: btmrvl: support Marvell Bluetooth device SD8797

11 years agoMerge branches 'for-linus' and 'for-linus-3.2' of git://
Linus Torvalds [Fri, 16 Dec 2011 20:15:50 +0000 (12:15 -0800)]
Merge branches 'for-linus' and 'for-linus-3.2' of git://git./linux/kernel/git/mason/linux-btrfs

* 'for-linus' of git://
  Btrfs: unplug every once and a while
  Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code
  Btrfs: only set cache_generation if we setup the block group
  Btrfs: don't panic if orphan item already exists
  Btrfs: fix leaked space in truncate
  Btrfs: fix how we do delalloc reservations and how we free reservations on error
  Btrfs: deal with enospc from dirtying inodes properly
  Btrfs: fix num_workers_starting bug and other bugs in async thread
  BTRFS: Establish i_ops before calling d_instantiate
  Btrfs: add a cond_resched() into the worker loop
  Btrfs: fix ctime update of on-disk inode
  btrfs: keep orphans for subvolume deletion
  Btrfs: fix inaccurate available space on raid0 profile
  Btrfs: fix wrong disk space information of the files
  Btrfs: fix wrong i_size when truncating a file to a larger size
  Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror

* 'for-linus-3.2' of git://
  btrfs: lower the dirty balance poll interval

11 years agoMerge branch 'drm-intel-fixes' of git://
Linus Torvalds [Fri, 16 Dec 2011 19:27:56 +0000 (11:27 -0800)]
Merge branch 'drm-intel-fixes' of git://

* 'drm-intel-fixes' of git://
  drm/i915/dp: Dither down to 6bpc if it makes the mode fit
  drm/i915: enable semaphores on per-device defaults
  drm/i915: don't set unpin_work if vblank_get fails
  drm/i915: By default, enable RC6 on IVB and SNB when reasonable
  iommu: Export intel_iommu_enabled to signal when iommu is in use
  drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
  drm/i915: prevent division by zero when asking for chipset power
  drm/i915: add PCH info to i915_capabilities
  drm/i915: set the right SDVO transcoder for CPT
  drm/i915: no-lvds quirk for ASUS AT5NM10T-I
  drm/i915: Treat pre-gen4 backlight duty cycle value consistently
  drm/i915: Hook up Ivybridge eDP
  drm/i915: add multi-threaded forcewake support

11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Fri, 16 Dec 2011 19:14:42 +0000 (11:14 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound

* 'for-linus' of git://
  ALSA: HDA: Use LPIB Position fix for Intel SCH Poulsbo
  ALSA: hda: fix mute led polarity for HP laptops with buggy BIOS
  ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based device
  ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails
  ASoC: WM8958: correctly show firmware magic on mismatch
  ASoC: mxs: Add appropriate MODULE_ALIAS()
  ASoC: mxs: Add missing MODULE_LICENSE("GPL")
  ASoC: Fix WM8996 24.576MHz clock operation
  ASoC: Include linux/module.h for smdk2443_wm9710
  ASoC: Fix a typo in jive_wm8750
  ASoC: Fix build dependency for SND_SOC_JZ4740_CODEC
  ASoC: Include linux/io.h for jz4740 codec

11 years agoMerge branch 'gpio/merge' of git://
Linus Torvalds [Fri, 16 Dec 2011 19:13:49 +0000 (11:13 -0800)]
Merge branch 'gpio/merge' of git://

* 'gpio/merge' of git://
  gpio: Fix DA9052 GPIO build errors.
  gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121
  gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip
  gpio-ml-ioh: fix a bug in the interrupt handler
  gpio: pl061: drop extra check for NULL platform_data

11 years agoMerge branch 'fixes' of git://
Linus Torvalds [Fri, 16 Dec 2011 18:07:50 +0000 (10:07 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/arm/arm-soc

* 'fixes' of git://
  ARM: OMAP: rx51: fix USB
  ARM: OMAP: mcbsp: Fix possible memory corruption
  arm/imx: fix power button on imx51 babbage board
  ARM: imx: fix cpufreq build errors
  ARM: mx5: add __initconst for fec pdata
  MXC PWM: should active during DOZE/WAIT/DBG mode
  ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS
  ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep
  ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210
  ARM: SAMSUNG: remove duplicated header include

11 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Fri, 16 Dec 2011 18:05:14 +0000 (10:05 -0800)]
Merge branch 'for-linus' of git://

* 'for-linus' of git://
  block: don't kick empty queue in blk_drain_queue()
  block/swim3: Locking fixes
  loop: Fix discard_alignment default setting
  cfq-iosched: fix cfq_cic_link() race confition
  cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails
  cciss: fix flush cache transfer length
  cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler
  loop: fix loop block driver discard and encryption comment
  block: initialize request_queue's numa node during

11 years agobtrfs: lower the dirty balance poll interval
Wu Fengguang [Fri, 16 Dec 2011 17:32:57 +0000 (12:32 -0500)]
btrfs: lower the dirty balance poll interval

Tests show that the original large intervals can easily make the dirty
limit exceeded on 100 concurrent dd's. So adapt to as large as the
next check point selected by the dirty throttling algorithm.

Signed-off-by: Wu Fengguang <>
Signed-off-by: Chris Mason <>
11 years agodrm/i915/dp: Dither down to 6bpc if it makes the mode fit
Adam Jackson [Tue, 13 Dec 2011 23:41:00 +0000 (15:41 -0800)]
drm/i915/dp: Dither down to 6bpc if it makes the mode fit

Some active adaptors (VGA usually) only have two lanes at 2.7GHz.
That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc.

Fixes Asus UX31 panel being black at startup due to no valid modes since

v2: Rebased to current code, resulting in the fix applying to EDP panels as
    well.  Also changed from spatio-temporal to just spatial dithering on
    pre-ironlake, to be conssitent (and less visual flicker)

Signed-off-by: Adam Jackson <>
Signed-off-by: Eric Anholt <>
Tested-by: Eric Anholt <>
Tested-by: Dirk Hohndel <>
Signed-off-by: Keith Packard <>
11 years agodrm/i915: enable semaphores on per-device defaults
Eugeni Dodonov [Sat, 10 Dec 2011 01:16:37 +0000 (17:16 -0800)]
drm/i915: enable semaphores on per-device defaults

This adds a default setting for semaphores parameter, and enables
semaphores by default on IVB.

For now, as semaphores interaction with VTd causes random issues on
SNB, we do not enable them by default. But they can still be enabled
via the semaphores=1 kernel parameter.

v2: enables semaphores on SNB when IO remapping is disabled, with base
on Keith Packard patch.

CC: Daniel Vetter <>
CC: Ben Widawsky <>
CC: Keith Packard <>
CC: Jesse Barnes <>
CC: Chris Wilson <>
Reviewed-by: Chris Wilson <>
Reviewed-by: Daniel Vetter <>
Signed-off-by: Eugeni Dodonov <>
Signed-off-by: Keith Packard <>
11 years agodrm/i915: don't set unpin_work if vblank_get fails
Jesse Barnes [Mon, 29 Aug 2011 16:45:28 +0000 (09:45 -0700)]
drm/i915: don't set unpin_work if vblank_get fails

This fixes a race where we may try to finish a page flip and decrement
the refcount even if our vblank_get failed and we ended up with a
spurious flip pending interrupt.


Signed-off-by: Jesse Barnes <>
Signed-off-by: Keith Packard <>
11 years agodrm/i915: By default, enable RC6 on IVB and SNB when reasonable
Keith Packard [Thu, 17 Nov 2011 06:24:52 +0000 (22:24 -0800)]
drm/i915: By default, enable RC6 on IVB and SNB when reasonable

RC6 should always work on IVB, and should work on SNB whenever IO
remapping is disabled. RC6 never works on Ironlake. Make the default
value for the parameter follow these guidelines. Setting the value
to either 0 or 1 will force the specified behavior.

Signed-off-by: Keith Packard <>
Reviewed-by: Kenneth Graunke <>
Reviewed-by: Eugeni Dodonov <>
Cc: Ted Phelps <>
Cc: Peter <>
Cc: Lukas Hejtmanek <>
Cc: Andrew Lutomirski <>
11 years agoiommu: Export intel_iommu_enabled to signal when iommu is in use
Eugeni Dodonov [Wed, 23 Nov 2011 18:42:14 +0000 (16:42 -0200)]
iommu: Export intel_iommu_enabled to signal when iommu is in use

In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar
is enabled. The new 'intel_iommu_enabled' variable signals when the
iommu code is in operation.

Cc: Ted Phelps <>
Cc: Peter <>
Cc: Lukas Hejtmanek <>
Cc: Andrew Lutomirski <>
CC: Daniel Vetter <>
Cc: Eugeni Dodonov <>
Signed-off-by: Keith Packard <>
11 years agodrm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
Chris Wilson [Mon, 20 Jun 2011 13:45:50 +0000 (14:45 +0100)]
drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check

We were checking whether the supplied edid matched the connector it was
read from. We do this in case a DDC read returns an EDID for another
device on a multifunction or otherwise interesting card. However, we
failed to include LVDS as a digital device and so rejecting an otherwise
valid EDID.

Fixes the detection of the secondary SDVO LVDS panel on the Libretto

Signed-off-by: Chris Wilson <>
Reviewed-by: Adam Jackson <>
Signed-off-by: Keith Packard <>
11 years agodrm/i915: prevent division by zero when asking for chipset power
Eugeni Dodonov [Thu, 10 Nov 2011 15:55:15 +0000 (13:55 -0200)]
drm/i915: prevent division by zero when asking for chipset power

This prevents an in-kernel division by zero which happens when we are
asking for i915_chipset_val too quickly, or within a race condition
between the power monitoring thread and userspace accesses via debugfs.

The issue can be reproduced easily via the following command:
while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; done

This is particularly dangerous because it can be triggered by
a non-privileged user by just reading the debugfs entry.

This issue was also found independently by Konstantin Belousov
<>, who proposed a similar patch.

Reported-by: Konstantin Belousov <>
Acked-by: Jesse Barnes <>
Acked-by: Keith Packard <>
Reviewed-by: Chris Wilson <>
Cc: <>
Signed-off-by: Eugeni Dodonov <>
Signed-off-by: Keith Packard <>
11 years agodrm/i915: add PCH info to i915_capabilities
Paulo Zanoni [Fri, 14 Oct 2011 21:17:41 +0000 (18:17 -0300)]
drm/i915: add PCH info to i915_capabilities

Signed-off-by: Chris Wilson <>
Signed-off-by: Paulo Zanoni <>
Signed-off-by: Keith Packard <>
11 years agodrm/i915: set the right SDVO transcoder for CPT
Paulo Zanoni [Fri, 14 Oct 2011 21:16:22 +0000 (18:16 -0300)]
drm/i915: set the right SDVO transcoder for CPT

v2: add a CPT-specific macro, make code cleaner
v3: fix commit message

Signed-off-by: Paulo Zanoni <>
Reviewed-by: Chris Wilson <>
Signed-off-by: Keith Packard <>
11 years agodrm/i915: no-lvds quirk for ASUS AT5NM10T-I
Adam Jackson [Mon, 28 Nov 2011 17:22:56 +0000 (12:22 -0500)]
drm/i915: no-lvds quirk for ASUS AT5NM10T-I

Signed-off-by: Adam Jackson <>
Signed-off-by: Keith Packard <>
11 years agosched: Fix select_idle_sibling() regression in selecting an idle SMT sibling
Peter Zijlstra [Thu, 15 Dec 2011 19:47:00 +0000 (11:47 -0800)]
sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling

Mike Galbraith reported that this recent commit:

   commit 4dcfe1025b513c2c1da5bf5586adb0e80148f612
   Author: Peter Zijlstra <>
   Date:   Thu Nov 10 13:01:10 2011 +0100

       sched: Avoid SMT siblings in select_idle_sibling() if possible

stopped selecting an idle SMT sibling when there are no idle
cores in a single socket system.

Intent of the select_idle_sibling() was to fallback to an idle
SMT sibling, if it fails to identify an idle core. But this
fallback was not happening on systems where all the scheduler
domains had `SD_SHARE_PKG_RESOURCES' flag set.

Fix it. Slightly bigger patch of cleaning all these goto's etc
is queued up for the next release.

Reported-by: Mike Galbraith <>
Reported-by: Alex Shi <>
Signed-off-by: Peter Zijlstra <>
Signed-off-by: Suresh Siddha <>
Signed-off-by: Ingo Molnar <>
11 years agoMerge branch 'samsung-fixes-3' of git://
Olof Johansson [Fri, 16 Dec 2011 07:34:17 +0000 (23:34 -0800)]
Merge branch 'samsung-fixes-3' of git://git./linux/kernel/git/kgene/linux-samsung into fixes

11 years agoMerge branch 'fixes' of git://
Olof Johansson [Fri, 16 Dec 2011 04:58:37 +0000 (20:58 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

11 years agoNFS: Fix a regression in nfs_file_llseek()
Trond Myklebust [Thu, 15 Dec 2011 23:38:10 +0000 (18:38 -0500)]
NFS: Fix a regression in nfs_file_llseek()

After commit 06222e491e663dac939f04b125c9dc52126a75c4 (fs: handle
SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek)
the behaviour of llseek() was changed so that it always revalidates
the file size. The bug appears to be due to a logic error in the
afore-mentioned commit, which always evaluates to 'true'.

Reported-by: Roel Kluin <>
Signed-off-by: Trond Myklebust <>
Cc: [>=3.1]
11 years agoMerge branch 'linux-next' of git://
Linus Torvalds [Thu, 15 Dec 2011 22:16:47 +0000 (14:16 -0800)]
Merge branch 'linux-next' of git://git./linux/kernel/git/konrad/ibft

* 'linux-next' of git://
  ibft: Fix finding IBFT ACPI table on UEFI

11 years agoMerge branch 'staging-linus' of git://
Linus Torvalds [Thu, 15 Dec 2011 22:15:01 +0000 (14:15 -0800)]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging

* 'staging-linus' of git://
  staging: r8712u: Add new USB ID
  staging: tidspbridge: request dmtimer clocks on init
  staging: tidspbridge: include module.h by default

11 years agoMerge branch 'usb-linus' of git://
Linus Torvalds [Thu, 15 Dec 2011 22:14:41 +0000 (14:14 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb

* 'usb-linus' of git://
  USB: option: Removing one bogus and adding some new Huawei combinations
  USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.
  usb: option: Add Huawei E398 controlling interfaces
  usb: renesas_usbhs: add hcd->has_tt for low/full speed
  usb: renesas_usbhs: typofix: irq_dtch control DTCHE
  usb: gadget: storage: release superspeed descriptors.

11 years agoARM: unwinder: fix bisection to find origin in .idx section
Uwe Kleine-König [Thu, 15 Dec 2011 20:47:56 +0000 (21:47 +0100)]
ARM: unwinder: fix bisection to find origin in .idx section

The bisection implemented in unwind_find_origin() stopped to early.  If
there is only a single entry left to check the original code just took
the end point as origin which might be wrong.

This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding
for XIP kernels").

Reported-and-tested-by: Nick Bowler <>
Signed-off-by: Uwe Kleine-König <>
Signed-off-by: Linus Torvalds <>
11 years agoBtrfs: unplug every once and a while
Chris Mason [Thu, 15 Dec 2011 20:38:41 +0000 (15:38 -0500)]
Btrfs: unplug every once and a while

The btrfs io submission threads can build up massive plug lists.  This
keeps things more reasonable so we don't hand over huge dumps of IO at

Signed-off-by: Chris Mason <>
11 years agopercpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses
Eugene Surovegin [Thu, 15 Dec 2011 19:25:59 +0000 (11:25 -0800)]
percpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses

per_cpu_ptr_to_phys() incorrectly rounds up its result for non-kmalloc
case to the page boundary, which is bogus for any non-page-aligned

This affects the only in-tree user of this function - sysfs handler
for per-cpu 'crash_notes' physical address.  The trouble is that the
crash_notes per-cpu variable is not page-aligned:

crash_notes = 0xc08e8ed4
 CPU 0: 3711f000
 CPU 1: 37129000
 CPU 2: 37133000
 CPU 3: 3713d000

So, the per-cpu addresses are:
 crash_notes on CPU 0: f7a07ed4 => phys 36b57ed4
 crash_notes on CPU 1: f7a11ed4 => phys 36b4ded4
 crash_notes on CPU 2: f7a1bed4 => phys 36b43ed4
 crash_notes on CPU 3: f7a25ed4 => phys 36b39ed4

However, /sys/devices/system/cpu/cpu*/crash_notes says:
 /sys/devices/system/cpu/cpu0/crash_notes: 36b57000
 /sys/devices/system/cpu/cpu1/crash_notes: 36b4d000
 /sys/devices/system/cpu/cpu2/crash_notes: 36b43000
 /sys/devices/system/cpu/cpu3/crash_notes: 36b39000

As you can see, all values are rounded down to a page
boundary. Consequently, this is where kexec sets up the NOTE segments,
and thus where the secondary kernel is looking for them. However, when
the first kernel crashes, it saves the notes to the unaligned
addresses, where they are not found.

Fix it by adding offset_in_page() to the translated page address.

-tj: Combined Eugene's and Petr's commit messages.

Signed-off-by: Eugene Surovegin <>
Signed-off-by: Tejun Heo <>
Reported-by: Petr Tesarik <>
11 years agoblock: don't kick empty queue in blk_drain_queue()
Tejun Heo [Thu, 15 Dec 2011 19:03:04 +0000 (20:03 +0100)]
block: don't kick empty queue in blk_drain_queue()

While probing, fd sets up queue, probes hardware and tears down the
queue if probing fails.  In the process, blk_drain_queue() kicks the
queue which failed to finish initialization and fd is unhappy about

  floppy0: no floppy controllers found
  ------------[ cut here ]------------
  WARNING: at drivers/block/floppy.c:2929 do_fd_request+0xbf/0xd0()
  Hardware name: To Be Filled By O.E.M.
  VFS: do_fd_request called on non-open device
  Modules linked in:
  Pid: 1, comm: swapper Not tainted 3.2.0-rc4-00077-g5983fe2 #2
  Call Trace:
   [<ffffffff81039a6a>] warn_slowpath_common+0x7a/0xb0
   [<ffffffff81039b41>] warn_slowpath_fmt+0x41/0x50
   [<ffffffff813d657f>] do_fd_request+0xbf/0xd0
   [<ffffffff81322b95>] blk_drain_queue+0x65/0x80
   [<ffffffff81322c93>] blk_cleanup_queue+0xe3/0x1a0
   [<ffffffff818a809d>] floppy_init+0xdeb/0xe28
   [<ffffffff818a72b2>] ? daring+0x6b/0x6b
   [<ffffffff810002af>] do_one_initcall+0x3f/0x170
   [<ffffffff81884b34>] kernel_init+0x9d/0x11e
   [<ffffffff810317c2>] ? schedule_tail+0x22/0xa0
   [<ffffffff815dbb14>] kernel_thread_helper+0x4/0x10
   [<ffffffff81884a97>] ? start_kernel+0x2be/0x2be
   [<ffffffff815dbb10>] ? gs_change+0xb/0xb

Avoid it by making blk_drain_queue() kick queue iff dispatch queue has
something on it.

Signed-off-by: Tejun Heo <>
Reported-by: Ralf Hildebrandt <>
Reported-by: Wu Fengguang <>
Tested-by: Sergei Trofimovich <>
Signed-off-by: Jens Axboe <>
11 years agoMerge branch 'stable/for-linus-fixes-3.2' of git://
Linus Torvalds [Thu, 15 Dec 2011 18:52:40 +0000 (10:52 -0800)]
Merge branch 'stable/for-linus-fixes-3.2' of git://git./linux/kernel/git/konrad/xen

* 'stable/for-linus-fixes-3.2' of git://
  xen/swiotlb: Use page alignment for early buffer allocation.
  xen: only limit memory map to maximum reservation for domain 0.

11 years agoMerge branch 'for-chris' of
Chris Mason [Thu, 15 Dec 2011 18:43:49 +0000 (13:43 -0500)]
Merge branch 'for-chris' of git./linux/kernel/git/josef/btrfs-work into integration


Signed-off-by: Chris Mason <>
11 years agoBtrfs: deal with NULL srv_rsv in the delalloc inode reservation code
Chris Mason [Thu, 15 Dec 2011 18:36:29 +0000 (13:36 -0500)]
Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code

btrfs_update_inode is sometimes called with a null reservation.

Signed-off-by: Chris Mason <>
11 years agogpio: Fix DA9052 GPIO build errors.
Ashish Jangam [Thu, 15 Dec 2011 09:25:46 +0000 (14:55 +0530)]
gpio: Fix DA9052 GPIO build errors.

This patch is functionally tested on Samsung SMDKV6410.

Reported-by: Stephen Rothwell <>
Signed-off-by: David Dajun Chen <>
Signed-off-by: Ashish Jangam <>
[grant.likely: don't create an unnecessary header file]
Signed-off-by: Grant Likely <>
11 years agoxen/swiotlb: Use page alignment for early buffer allocation.
Konrad Rzeszutek Wilk [Thu, 15 Dec 2011 16:28:46 +0000 (11:28 -0500)]
xen/swiotlb: Use page alignment for early buffer allocation.

This fixes an odd bug found on a Dell PowerEdge 1850/0RC130
(BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask
would fail with:

ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO

The issue was the Xen-SWIOTLB was allocated such as that the end of
buffer was stradling a page (and also above 4GB). The fix was
spotted by Kalev Leonid  which was to piggyback on git commit
e79f86b2ef9c0a8c47225217c1018b7d3d90101c "swiotlb: Use page alignment
for early buffer allocation" which:

We could call free_bootmem_late() if swiotlb is not used, and
it will shrink to page alignment.

So alloc them with page alignment at first, to avoid lose two pages

And doing that fixes the outstanding issue.

Suggested-by: "Kalev, Leonid" <>
Reported-and-Tested-by: "Taylor, Neal E" <>
Signed-off-by: Konrad Rzeszutek Wilk <>
11 years agoxen: only limit memory map to maximum reservation for domain 0.
Ian Campbell [Wed, 14 Dec 2011 12:16:08 +0000 (12:16 +0000)]
xen: only limit memory map to maximum reservation for domain 0.

d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM"
clamped the total amount of RAM to the current maximum reservation. This is
correct for dom0 but is not correct for guest domains. In order to boot a guest
"pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for
future memory expansion the guest must derive max_pfn from the e820 provided by
the toolstack and not the current maximum reservation (which can reflect only
the current maximum, not the guest lifetime max). The existing algorithm
already behaves this correctly if we do not artificially limit the maximum
number of pages for the guest case.

For a guest booted with maxmem=512, memory=128 this results in:
 [    0.000000] BIOS-provided physical RAM map:
 [    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
 [    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
-[    0.000000]  Xen: 0000000000100000 - 0000000008100000 (usable)
-[    0.000000]  Xen: 0000000008100000 - 0000000020800000 (unusable)
+[    0.000000]  Xen: 0000000000100000 - 0000000020800000 (usable)
 [    0.000000] NX (Execute Disable) protection: active
 [    0.000000] DMI not present or invalid.
 [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
 [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
-[    0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000
+[    0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000
 [    0.000000] initial memory mapped : 0 - 027ff000
 [    0.000000] Base memory trampoline at [c009f000] 9f000 size 4096
-[    0.000000] init_memory_mapping: 0000000000000000-0000000008100000
-[    0.000000]  0000000000 - 0008100000 page 4k
-[    0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000
+[    0.000000] init_memory_mapping: 0000000000000000-0000000020800000
+[    0.000000]  0000000000 - 0020800000 page 4k
+[    0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000
 [    0.000000] xen: setting RW the range 27e8000 - 27ff000
 [    0.000000] 0MB HIGHMEM available.
-[    0.000000] 129MB LOWMEM available.
-[    0.000000]   mapped low ram: 0 - 08100000
-[    0.000000]   low ram: 0 - 08100000
+[    0.000000] 520MB LOWMEM available.
+[    0.000000]   mapped low ram: 0 - 20800000
+[    0.000000]   low ram: 0 - 20800000

With this change "xl mem-set <domain> 512M" will successfully increase the
guest RAM (by reducing the balloon).

There is no change for dom0.

Reported-and-Tested-by: George Shuklin <>
Signed-off-by: Ian Campbell <>
Reviewed-by: David Vrabel <>
Signed-off-by: Konrad Rzeszutek Wilk <>
11 years agoBtrfs: only set cache_generation if we setup the block group
Josef Bacik [Tue, 13 Dec 2011 21:04:54 +0000 (16:04 -0500)]
Btrfs: only set cache_generation if we setup the block group

A user reported a problem booting into a new kernel with the old format inodes.
He was panicing in cow_file_range while writing out the inode cache.  This is
because if the block group is not cached we'll just skip writing out the cache,
however if it gets dirtied again in the same transaction and it finished caching
we'd go ahead and write it out, but since we set cache_generation to the transid
we think we've already truncated it and will just carry on, running into
cow_file_range and blowing up.  We need to make sure we only set
cache_generation if we've done the truncate.  The user tested this patch and
verified that the panic no longer occured.  Thanks,

Reported-and-Tested-by: Klaus Bitto <>
Signed-off-by: Josef Bacik <>
11 years agoBtrfs: don't panic if orphan item already exists
Josef Bacik [Tue, 13 Dec 2011 17:55:58 +0000 (12:55 -0500)]
Btrfs: don't panic if orphan item already exists

I've been hitting this BUG_ON() in btrfs_orphan_add when running xfstest 269 in
a loop.  This is because we will add an orphan item, do the truncate, the
truncate will fail for whatever reason (*cough*ENOSPC*cough*) and then we're
left with an orphan item still in the fs.  Then we come back later to do another
truncate and it blows up because we already have an orphan item.  This is ok so
just fix the BUG_ON() to only BUG() if ret is not EEXIST.  Thanks,

Signed-off-by: Josef Bacik <>
11 years agoBtrfs: fix leaked space in truncate
Josef Bacik [Fri, 9 Dec 2011 18:26:22 +0000 (13:26 -0500)]
Btrfs: fix leaked space in truncate

We were occasionaly leaking space when running xfstest 269.  This is because if
we failed to start the transaction in the truncate loop we'd just goto out, but
we need to break so that the inode is removed from the orphan list and the space
is properly freed.  Thanks,

Signed-off-by: Josef Bacik <>
11 years agoBtrfs: fix how we do delalloc reservations and how we free reservations on error
Josef Bacik [Fri, 9 Dec 2011 16:18:51 +0000 (11:18 -0500)]
Btrfs: fix how we do delalloc reservations and how we free reservations on error

Running xfstests 269 with some tracing my scripts kept spitting out errors about
releasing bytes that we didn't actually have reserved.  This took me down a huge
rabbit hole and it turns out the way we deal with reserved_extents is wrong,
we need to only be setting it if the reservation succeeds, otherwise the free()
method will come in and unreserve space that isn't actually reserved yet, which
can lead to other warnings and such.  The math was all working out right in the
end, but it caused all sorts of other issues in addition to making my scripts
yell and scream and generally make it impossible for me to track down the
original issue I was looking for.  The other problem is with our error handling
in the reservation code.  There are two cases that we need to deal with

1) We raced with free.  In this case free won't free anything because csum_bytes
is modified before we dro the lock in our reservation path, so free rightly
doesn't release any space because the reservation code may be depending on that
reservation.  However if we fail, we need the reservation side to do the free at
that point since that space is no longer in use.  So as it stands the code was
doing this fine and it worked out, except in case #2

2) We don't race with free.  Nobody comes in and changes anything, and our
reservation fails.  In this case we didn't reserve anything anyway and we just
need to clean up csum_bytes but not free anything.  So we keep track of
csum_bytes before we drop the lock and if it hasn't changed we know we can just
decrement csum_bytes and carry on.

Because of the case where we can race with free()'s since we have to drop our
spin_lock to do the reservation, I'm going to serialize all reservations with
the i_mutex.  We already get this for free in the heavy use paths, truncate and
file write all hold the i_mutex, just needed to add it to page_mkwrite and
various ioctl/balance things.  With this patch my space leak scripts no longer
scream bloody murder.  Thanks,

Signed-off-by: Josef Bacik <>
11 years agoBtrfs: deal with enospc from dirtying inodes properly
Josef Bacik [Wed, 30 Nov 2011 15:45:38 +0000 (10:45 -0500)]
Btrfs: deal with enospc from dirtying inodes properly

Now that we're properly keeping track of delayed inode space we've been getting
a lot of warnings out of btrfs_dirty_inode() when running xfstest 83.  This is
because a bunch of people call mark_inode_dirty, which is void so we can't
return ENOSPC.  This needs to be fixed in a few areas

1) file_update_time - this updates the mtime and such when writing to a file,
which will call mark_inode_dirty.  So copy file_update_time into btrfs so we can
call btrfs_dirty_inode directly and return an error if we get one appropriately.

2) fix symlinks to use btrfs_setattr for ->setattr.  For some reason we weren't
setting ->setattr for symlinks, even though we should have been.  This catches
one of the cases where we were getting errors in mark_inode_dirty.

3) Fix btrfs_setattr and btrfs_setsize to call btrfs_dirty_inode directly
instead of mark_inode_dirty.  This lets us return errors properly for truncate
and chown/anything related to setattr.

4) Add a new btrfs_fs_dirty_inode which will just call btrfs_dirty_inode and
print an error if we have one.  The only remaining user we can't control for
this is touch_atime(), but we don't really want to keep people from walking
down the tree if we don't have space to save the atime update, so just complain
but don't worry about it.

With this patch xfstests 83 complains a handful of times instead of hundreds of
times.  Thanks,

Signed-off-by: Josef Bacik <>