vfs: missed source of ->f_pos races

commit 0e665d5d1125f9f4ccff56a75e814f10f88861a2 upstream.

compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing
as sys_{read,write}{,v}().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

NFSv3: Ensure that do_proc_get_root() reports errors correctly

commit 086600430493e04b802bee6e5b3ce0458e4eb77f upstream.

If the rpc call to NFS3PROC_FSINFO fails, then we need to report that
error so that the mount fails. Otherwise we can end up with a
superblock with completely unusable values for block sizes, maxfilesize,
etc.

Reported-by: Yuanming Chen <hikvision_linux@163.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: split ATRM support out from the ATPX handler (v3)

commit c61e2775873f603148e8e998a938721b7d222d24 upstream.

There are systems that use ATRM, but not ATPX.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41265

V2: fix #ifdefs as per Greg's comments
V3: fix it harder

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: fix use after free in ATRM bios reading code.

commit de47a9cd62771e3e78954d855d2304fbad4c5a44 upstream.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=45503

Reported-and-Debugged-by: mlambda@gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: finish getting bios earlier

commit 211fa4fc4e13492151e698d92b0dff56b29928ec upstream.

Return a number of bytes read in radeon_atrm_get_bios_chunk() and
properly check this value in radeon_atrm_get_bios().
If radeon_atrm_get_bios_chunk() read less bytes then were requested,
it means that it finished reading bios data.

Prior to this patch, condition in radeon_atrm_get_bios() was always
equivalent to "if (ATRM_BIOS_PAGE <= 0)", so it was always false,
thus radeon_atrm_get_bios() was trying to read past the bios data
wasting boot time.

On my lenovo ideapad u455 laptop this patch drops bios reading time
from ~5.5s to ~1.5s.

Signed-off-by: Igor Murzov <e-mail@date.by>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: fix invalid memory access in radeon_atrm_get_bios()

commit a3f83ab1a717c0e6c2f59a4cfdaa10707cc35c55 upstream.

At a boot time I observed following bug:

 BUG: unable to handle kernel paging request at ffff8800a4244000
 IP: [<ffffffff81275b5b>] memcpy+0xb/0x120
 PGD 1816063 PUD 1fe7d067 PMD 1ff9f067 PTE 80000000a4244160
 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
 CPU 0
 Modules linked in: btusb bluetooth brcmsmac brcmutil crc8 cordic b43 radeon(+)
  mac80211 cfg80211 ttm ohci_hcd drm_kms_helper rfkill drm ssb agpgart mmc_core
  sp5100_tco video battery ac thermal processor rtc_cmos thermal_sys snd_hda_codec_hdmi
  joydev snd_hda_codec_conexant button bcma pcmcia snd_hda_intel snd_hda_codec
  snd_hwdep snd_pcm shpchp pcmcia_core k8temp snd_timer atl1c snd psmouse hwmon
  i2c_piix4 i2c_algo_bit soundcore evdev i2c_core ehci_hcd sg serio_raw snd_page_alloc
  loop btrfs

 Pid: 1008, comm: modprobe Not tainted 3.3.0-rc1 #21 LENOVO 20046                           /AMD CRB
 RIP: 0010:[<ffffffff81275b5b>]  [<ffffffff81275b5b>] memcpy+0xb/0x120
 RSP: 0018:ffff8800aa72db00  EFLAGS: 00010246
 RAX: ffff8800a4150000 RBX: 0000000000001000 RCX: 0000000000000087
 RDX: 0000000000000000 RSI: ffff8800a4244000 RDI: ffff8800a4150bc8
 RBP: ffff8800aa72db78 R08: 0000000000000010 R09: ffffffff8174bbec
 R10: ffffffff812ee010 R11: 0000000000000001 R12: 0000000000001000
 R13: 0000000000010000 R14: ffff8800a4140000 R15: ffff8800aaba1800
 FS:  00007ff9a3bd4720(0000) GS:ffff8800afa00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff8800a4244000 CR3: 00000000a9c18000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process modprobe (pid: 1008, threadinfo ffff8800aa72c000, task ffff8800aa0e4000)
 Stack:
  ffffffffa04e7c7b 0000000000000001 0000000000010000 ffff8800aa72db28
  ffffffff00000001 0000000000001000 ffffffff8113cbef 0000000000000020
  ffff8800a4243420 ffff880000000002 ffff8800aa72db08 ffff8800a9d42000
 Call Trace:
  [<ffffffffa04e7c7b>] ? radeon_atrm_get_bios_chunk+0x8b/0xd0 [radeon]
  [<ffffffff8113cbef>] ? kmalloc_order_trace+0x3f/0xb0
  [<ffffffffa04a9298>] radeon_get_bios+0x68/0x2f0 [radeon]
  [<ffffffffa04c7a30>] rv770_init+0x40/0x280 [radeon]
  [<ffffffffa047d740>] radeon_device_init+0x560/0x600 [radeon]
  [<ffffffffa047ef4f>] radeon_driver_load_kms+0xaf/0x170 [radeon]
  [<ffffffffa043cdde>] drm_get_pci_dev+0x18e/0x2c0 [drm]
  [<ffffffffa04e7e95>] radeon_pci_probe+0xad/0xb5 [radeon]
  [<ffffffff81296c5f>] local_pci_probe+0x5f/0xd0
  [<ffffffff81297418>] pci_device_probe+0x88/0xb0
  [<ffffffff813417aa>] ? driver_sysfs_add+0x7a/0xb0
  [<ffffffff813418d8>] really_probe+0x68/0x180
  [<ffffffff81341be5>] driver_probe_device+0x45/0x70
  [<ffffffff81341cb3>] __driver_attach+0xa3/0xb0
  [<ffffffff81341c10>] ? driver_probe_device+0x70/0x70
  [<ffffffff813400ce>] bus_for_each_dev+0x5e/0x90
  [<ffffffff8134172e>] driver_attach+0x1e/0x20
  [<ffffffff81341298>] bus_add_driver+0xc8/0x280
  [<ffffffff813422c6>] driver_register+0x76/0x140
  [<ffffffff812976d6>] __pci_register_driver+0x66/0xe0
  [<ffffffffa043d021>] drm_pci_init+0x111/0x120 [drm]
  [<ffffffff8133c67a>] ? vga_switcheroo_register_handler+0x3a/0x60
  [<ffffffffa0229000>] ? 0xffffffffa0228fff
  [<ffffffffa02290ec>] radeon_init+0xec/0xee [radeon]
  [<ffffffff810002f2>] do_one_initcall+0x42/0x180
  [<ffffffff8109d8d2>] sys_init_module+0x92/0x1e0
  [<ffffffff815407a9>] system_call_fastpath+0x16/0x1b
 Code: 58 2a 43 50 88 43 4e 48 83 c4 08 5b c9 c3 66 90 e8 cb fd ff ff eb
  e6 90 90 90 90 90 90 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48
  a5 89 d1 f3 a4 c3 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c
 RIP  [<ffffffff81275b5b>] memcpy+0xb/0x120
  RSP <ffff8800aa72db00>
 CR2: ffff8800a4244000
 ---[ end trace fcffa1599cf56382 ]---

Call to acpi_evaluate_object() not always returns 4096 bytes chunks,
on my system it can return 2048 bytes chunk, so pass the length of
retrieved chunk to memcpy(), not the length of the recieving buffer.

Signed-off-by: Igor Murzov <e-mail@date.by>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: convert radeon vfct code to use acpi_get_table_with_size

commit 7c3906d04a4587dceaa78cc1ae6b14e6454ee02a upstream.

Allows us to verify the table size.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ACPI: export symbol acpi_get_table_with_size

commit 4f81f986761a7663db7d24d24cd6ae68008f1fc2 upstream.

We need it in the radeon drm module to fetch
and verify the vbios image on UEFI systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: implement ACPI VFCT vbios fetch (v3)

commit 268ba0a99f89a84dc5eb312470896113d0709c74 upstream.

This is required for pure UEFI systems.  The vbios is stored
in ACPI rather than at the legacy vga location.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=26891

V2: fix #ifdefs as per Greg's comments
V3: fix it harder

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping

commit 52e9b39d9a89ae33662596bd30e62dd56bddbe73 upstream.

There is a more recent APU stepping with a new PCI ID
shipping in the same board by Fujitsu which needs the
same quirk to correctly mark the back plane connectors.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon/kms: upstream atombios.h updates

commit bf68adb4df2ac27a8f1b24894c007c9ef1c4195a upstream.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

netconsole: remove a redundant netconsole_target_put()

commit 72d3eb13b5c0abe7d63efac41f39c5b644c7bbaa upstream.

This netconsole_target_put() is obviously redundant, and it
causes a kernel segfault when removing a bridge device which has
netconsole running on it.

This is caused by:

commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093
Author: Amerigo Wang <amwang@redhat.com>
Date:   Thu May 19 21:39:10 2011 +0000

    netpoll: disable netpoll when enslave a device

Cc: David Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - don't create dysfunctional mixer controls for ca0132

commit c41999a23929f30808bae6009d8065052d4d73fd upstream.

It's possible that these amps are settable somehow, e g through
secret codec verbs, but for now, don't create the controls (as
they won't be working anyway, and cause errors in amixer).

BugLink: https://bugs.launchpad.net/bugs/1038651
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts

commit 67a806d9499353fabd5b5ff07337f3aa88a1c3ba upstream.

The following build error occurred during an alpha build:

  net/core/sock.c:274:36: error: initializer element is not constant

Dave Anglin says:
> Here is the line in sock.i:
>
> struct static_key memalloc_socks = ((struct static_key) { .enabled =
> ((atomic_t) { (0) }) });

The above line contains two compound literals.  It also uses a designated
initializer to initialize the field enabled.  A compound literal is not a
constant expression.

The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

alpha: Don't export SOCK_NONBLOCK to user space.

commit a2fa3ccd7b43665fe14cb562761a6c3d26a1d13f upstream.

Currently we export SOCK_NONBLOCK to user space but that conflicts with
the definition from glibc leading to compilation errors in user programs
(e.g.  see Debian bug #658460).

The generic socket.h restricts the definition of SOCK_NONBLOCK to the
kernel, as does the MIPS specific socket.h, so let's do the same on
Alpha.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: CDC ACM: Fix NULL pointer dereference

commit 99f347caa4568cb803862730b3b1f1942639523f upstream.

If a device specifies zero endpoints in its interface descriptor,
the kernel oopses in acm_probe(). Even though that's clearly an
invalid descriptor, we should test wether we have all endpoints.
This is especially bad as this oops can be triggered by just
plugging a USB device in.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: emi62: remove __devinit* from the struct usb_device_id table

commit 83957df21dd94655d2b026e0944a69ff37b83988 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: winbond: remove __devinit* from the struct usb_device_id table

commit 43a34695d9cd79c6659f09da6d3b0624f3dd169f upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Pavel Machek <pavel@ucw.cz>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: "John W. Linville" <linville@tuxdriver.com>
CC: Eliad Peller <eliad@wizery.com>
CC: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: vt6656: remove __devinit* from the struct usb_device_id table

commit 4d088876f24887cd15a29db923f5f37db6a99f21 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Forest Bond <forest@alittletooquiet.net>
CC: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jesper Juhl <jj@chaosbits.net>
CC: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: rtl8187: remove __devinit* from the struct usb_device_id table

commit a3433179d0822ccfa8e80aa4d1d52843bd2dcc63 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Herton Ronaldo Krzesinski <herton@canonical.com>
CC: Hin-Tak Leung <htl10@users.sourceforge.net>
CC: Larry Finger <Larry.Finger@lwfinger.net>
CC: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: p54usb: remove __devinit* from the struct usb_device_id table

commit b9c4167cbbafddac3462134013bc15e63e4c53ef upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Christian Lamparter <chunkeey@googlemail.com>
CC: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: spca506: remove __devinit* from the struct usb_device_id table

commit e694d518886c7afedcdd1732477832b2e32744e4 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: smsusb: remove __devinit* from the struct usb_device_id table

commit d04dbd1c0ec17a13326c8f2279399c225836a79f upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Mauro Carvalho Chehab <mchehab@infradead.org>
CC: Michael Krufky <mkrufky@linuxtv.org>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Doron Cohen <doronc@siano-ms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ASoC: wm9712: Fix microphone source selection

commit ccf795847a38235ee4a56a24129ce75147d6ba8f upstream.

Currently the microphone input source is not selectable as while there is
a DAPM widget it's not connected to anything so it won't be properly
instantiated. Add something more correct for the input structure to get
things going, even though it's not hooked into the rest of the routing
map and so won't actually achieve anything except allowing the relevant
register bits to be written.

Reported-by: Christop Fritz <chf.fritz@googlemail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

PM / Runtime: Clear power.deferred_resume on success in rpm_suspend()

commit 58a34de7b1a920d287d17d2ca08bc9aaf7e6d35b upstream.

The power.deferred_resume can only be set if the runtime PM status
of device is RPM_SUSPENDING and it should be cleared after its
status has been changed, regardless of whether or not the runtime
suspend has been successful.  However, it only is cleared on
suspend failure, while it may remain set on successful suspend and
is happily leaked to rpm_resume() executed in that case.

That shouldn't happen, so if power.deferred_resume is set in
rpm_suspend() after the status has been changed to RPM_SUSPENDED,
clear it before calling rpm_resume().  Then, it doesn't need to be
cleared before changing the status to RPM_SUSPENDING any more,
because it's always cleared after the status has been changed to
either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set

commit 7f321c26c04807834fef4c524d2b21573423fc74 upstream.

For devices whose power.no_callbacks flag is set, rpm_resume()
should return 1 if the device's parent is already active, so that
the callers of pm_runtime_get() don't think that they have to wait
for the device to resume (asynchronously) in that case (the core
won't queue up an asynchronous resume in that case, so there's
nothing to wait for anyway).

Modify the code accordingly (and make sure that an idle notification
will be queued up on success, even if 1 is to be returned).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ext4: fix long mount times on very big file systems

commit 0548bbb85337e532ca2ed697c3e9b227ff2ed4b4 upstream.

Commit 8aeb00ff85a: "ext4: fix overhead calculation used by
ext4_statfs()" introduced a O(n**2) calculation which makes very large
file systems take forever to mount.  Fix this with an optimization for
non-bigalloc file systems.  (For bigalloc file systems the overhead
needs to be set in the the superblock.)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

target: fix NULL pointer dereference bug alloc_page() fails to get memory

commit d0e27c88d795fb9647153063ec48051fd84e1731 upstream.

I am hitting this bug when the target is low in memory that fails the
alloc_page() for the newly submitted command. This is a sort of off-by-one
bug causing NULL pointer dereference in __free_page() since 'i' here is
really the counter of total pages that have been successfully allocated here.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Open-FCoE.org <devel@open-fcoe.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

NFS: Alias the nfs module to nfs4

commit 425e776d93a7a5070b77d4f458a5bab0f924652c upstream.

This allows distros to remove the line from their modprobe
configuration.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

md: Don't truncate size at 4TB for RAID0 and Linear

commit 667a5313ecd7308d79629c0738b0db588b0b0a4e upstream.

commit 27a7b260f71439c40546b43588448faac01adb93
   md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.

changed 0.90 metadata handling to truncated size to 4TB as that is
all that 0.90 can record.
However for RAID0 and Linear, 0.90 doesn't need to record the size, so
this truncation is not needed and causes working arrays to become too small.

So avoid the truncation for RAID0 and Linear

This bug was introduced in 3.1 and is suitable for any stable kernels
from then onwards.
As the offending commit was tagged for 'stable', any stable kernel
that it was applied to should also get this patch.  That includes
at least 2.6.32, 2.6.33 and 3.0. (Thanks to Ben Hutchings for
providing that list).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

dccp: check ccid before dereferencing

commit 276bdb82dedb290511467a5a4fdbe9f0b52dce6f upstream.

ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with
a NULL ccid pointer leading to a NULL pointer dereference. This could
lead to a privilege escalation if the attacker is able to map page 0 and
prepare it with a fake ccid_ops pointer.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

IB/srp: Fix a race condition

commit 220329916c72ee3d54ae7262b215a050f04a18fc upstream.

Avoid a crash caused by the scmnd->scsi_done(scmnd) call in
srp_process_rsp() being invoked with scsi_done == NULL.  This can
happen if a reply is received during or after a command abort.

Reported-by: Joseph Glanville <joseph.glanville@orionvm.com.au>
Reference: http://marc.info/?l=linux-rdma&m=134314367801595
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

PCI: EHCI: Fix crash during hibernation on ASUS computers

commit 0b68c8e2c3afaf9807eb1ebe0ccfb3b809570aa4 upstream.

Commit dbf0e4c (PCI: EHCI: fix crash during suspend on ASUS
computers) added a workaround for an ASUS suspend issue related to
USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut
down the EHCI controller during system suspend if its PCI command
register doesn't contain 0 at that time.

It turns out that the same workaround is necessary in the analogous
hibernation code path, so add it.

References: https://bugzilla.kernel.org/show_bug.cgi?id=45811
Reported-and-tested-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

vfs: canonicalize create mode in build_open_flags()

commit e68726ff72cf7ba5e7d789857fcd9a75ca573f03 upstream.

Userspace can pass weird create mode in open(2) that we canonicalize to
"(mode & S_IALLUGO) | S_IFREG" in vfs_create().

The problem is that we use the uncanonicalized mode before calling vfs_create()
with unforseen consequences.

So do the canonicalization early in build_open_flags().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

audit: fix refcounting in audit-tree

commit a2140fc0cb0325bb6384e788edd27b9a568714e2 upstream.

Refcounting of fsnotify_mark in audit tree is broken.  E.g:

                              refcount
create_chunk
  alloc_chunk                 1
  fsnotify_add_mark           2

untag_chunk
  fsnotify_get_mark           3
  fsnotify_destroy_mark
    audit_tree_freeing_mark   2
  fsnotify_put_mark           1
  fsnotify_put_mark           0
  via destroy_list
    fsnotify_mark_destroy    -1

This was reported by various people as triggering Oops when stopping auditd.

We could just remove the put_mark from audit_tree_freeing_mark() but that would
break freeing via inode destruction.  So this patch simply omits a put_mark
after calling destroy_mark or adds a get_mark before.

The additional get_mark is necessary where there's no other put_mark after
fsnotify_destroy_mark() since it assumes that the caller is holding a reference
(or the inode is keeping the mark pinned, not the case here AFAICS).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Valentin Avram <aval13@gmail.com>
Reported-by: Peter Moody <pmoody@google.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

audit: don't free_chunk() after fsnotify_add_mark()

commit 0fe33aae0e94b4097dd433c9399e16e17d638cd8 upstream.

Don't do free_chunk() after fsnotify_add_mark().  That one does a delayed unref
via the destroy list and this results in use-after-free.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915: reorder edp disabling to fix ivb MacBook Air

commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 upstream.

eDP is tons of fun. It turns out that at least the new MacBook Air 5,1
model absolutely doesn't like the new force vdd dance we've introduced
in

commit 6cb49835da0426f69a2931bc2a0a8156344b0e41
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun May 20 17:14:50 2012 +0200

    drm/i915: enable vdd when switching off the eDP panel

But that patch also tried to fix some neat edp sequence issue with the
force_vdd timings. Closer inspection reveals that we've raised
force_vdd only to do the aux channel communication dp_sink_dpms. If we
move the edp_panel_off below that, we don't need any force_vdd for the
disable sequence, which makes the Air happy.

Unfortunately the reporter of the original bug that the above commit
fixed is travelling, so we can't test whether this regresses things.
But my theory is that since we don't check for any power-off ->
force_vdd-on delays in edp_panel_vdd_on, this was the actual
root-cause of this failure. With that force_vdd dance completely
eliminated, I'm hopeful the original bug stays fixed, too.

For reference the old bug, which hopefully doesn't get broken by this:

https://bugzilla.kernel.org/show_bug.cgi?id=43163

In any case, regression fixers win over plain bugfixes, so this needs
to go in asap.

v2: The crucial pieces seems to be to clear the force_vdd flag
uncoditionally, too, in edp_panel_off. Looks like this is left behind
by the firmware somehow.

v3: The Apple firmware seems to switch off the panel on it's own, hence
we still need to keep force_vdd on, but properly clear it when switching
the panel off.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671
Tested-by: Roberto Romer <sildurin@gmail.com>
Tested-by: Daniel Wagner <wagi@monom.org>
Tested-by: Keith Packard <keithp@keithp.com>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate

commit af5e7d84b0ec45b2b614b0d6e3657cbdceaa21f9 upstream.

Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
[bwh: Backported to 3.2: register value is in the local 'data' variable]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ath9k: fix decrypt_error initialization in ath_rx_tasklet()

commit e1352fde5682ab1bdd2a9e5d75c22d1fe210ef77 upstream.

ath_rx_tasklet() calls ath9k_rx_skb_preprocess() and ath9k_rx_skb_postprocess()
in a loop over the received frames. The decrypt_error flag is
initialized to false
just outside ath_rx_tasklet() loop. ath9k_rx_accept(), called by
ath9k_rx_skb_preprocess(),
only sets decrypt_error to true and never to false.
Then ath_rx_tasklet() calls ath9k_rx_skb_postprocess() and passes
decrypt_error to it.
So, after a decryption error, in ath9k_rx_skb_postprocess(), we can
have a leftover value
from another processed frame. In that case, the frame will not be marked with
RX_FLAG_DECRYPTED even if it is decrypted correctly.
When using CCMP encryption this issue can lead to connection stuck
because of CCMP
PN corruption and a waste of CPU time since mac80211 tries to decrypt an already
deciphered frame with ieee80211_aes_ccm_decrypt.
Fix the issue initializing decrypt_error flag at the begging of the
ath_rx_tasklet() loop.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mutex: Place lock in contended state after fastpath_lock failure

commit 0bce9c46bf3b15f485d82d7e81dabed6ebcc24b1 upstream.

ARM recently moved to asm-generic/mutex-xchg.h for its mutex
implementation after the previous implementation was found to be missing
some crucial memory barriers. However, this has revealed some problems
running hackbench on SMP platforms due to the way in which the
MUTEX_SPIN_ON_OWNER code operates.

The symptoms are that a bunch of hackbench tasks are left waiting on an
unlocked mutex and therefore never get woken up to claim it. This boils
down to the following sequence of events:

        Task A        Task B        Task C        Lock value
0                                                     1
1       lock()                                        0
2                     lock()                          0
3                     spin(A)                         0
4       unlock()                                      1
5                                   lock()            0
6                     cmpxchg(1,0)                    0
7                     contended()                    -1
8       lock()                                        0
9       spin(C)                                       0
10                                  unlock()          1
11      cmpxchg(1,0)                                  0
12      unlock()                                      1

At this point, the lock is unlocked, but Task B is in an uninterruptible
sleep with nobody to wake it up.

This patch fixes the problem by ensuring we put the lock into the
contended state if we fail to acquire it on the fastpath, ensuring that
any blocked waiters are woken up when the mutex is released.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-6e9lrw2avczr0617fzl5vqb8@git.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sched: fix divide by zero at {thread_group,task}_times

commit bea6832cc8c4a0a9a65dd17da6aaa657fe27bc3e upstream.

On architectures where cputime_t is 64 bit type, is possible to trigger
divide by zero on do_div(temp, (__force u32) total) line, if total is a
non zero number but has lower 32 bit's zeroed. Removing casting is not
a good solution since some do_div() implementations do cast to u32
internally.

This problem can be triggered in practice on very long lived processes:

  PID: 2331   TASK: ffff880472814b00  CPU: 2   COMMAND: "oraagent.bin"
   #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b
   #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2
   #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00
   #3 [ffff880472a51cd0] die at ffffffff8100f26b
   #4 [ffff880472a51d00] do_trap at ffffffff814f03f4
   #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff
   #6 [ffff880472a51e00] divide_error at ffffffff8100be7b
      [exception RIP: thread_group_times+0x56]
      RIP: ffffffff81056a16  RSP: ffff880472a51eb8  RFLAGS: 00010046
      RAX: bc3572c9fe12d194  RBX: ffff880874150800  RCX: 0000000110266fad
      RDX: 0000000000000000  RSI: ffff880472a51eb8  RDI: 001038ae7d9633dc
      RBP: ffff880472a51ef8   R8: 00000000b10a3a64   R9: ffff880874150800
      R10: 00007fcba27ab680  R11: 0000000000000202  R12: ffff880472a51f08
      R13: ffff880472a51f10  R14: 0000000000000000  R15: 0000000000000007
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
   #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d
   #8 [ffff880472a51f40] sys_times at ffffffff81088524
   #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2
      RIP: 0000003808caac3a  RSP: 00007fcba27ab6d8  RFLAGS: 00000202
      RAX: 0000000000000064  RBX: ffffffff8100b0f2  RCX: 0000000000000000
      RDX: 00007fcba27ab6e0  RSI: 000000000076d58e  RDI: 00007fcba27ab6e0
      RBP: 00007fcba27ab700   R8: 0000000000000020   R9: 000000000000091b
      R10: 00007fcba27ab680  R11: 0000000000000202  R12: 00007fff9ca41940
      R13: 0000000000000000  R14: 00007fcba27ac9c0  R15: 00007fff9ca41940
      ORIG_RAX: 0000000000000064  CS: 0033  SS: 002b

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2:
 - Adjust filename
 - Most conversions in the original code are implicit]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - fix Copyright debug message

commit 088c820b732dbfd515fc66d459d5f5777f79b406 upstream.

As spec said, 1 indicates no copyright is asserted.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915: ignore eDP bpc settings from vbt

commit 4344b813f105a19f793f1fd93ad775b784648b95 upstream.

This has originally been introduced to not oversubscribe the dp links
in

commit 885a5fb5b120a5c7e0b3baad7b0feb5a89f76c18
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date:   Tue Jan 12 05:38:31 2010 +0800

    drm/i915: fix pixel color depth setting on eDP

Since then we've fixed up the dp link bandwidth calculation code and
should now automatically fall back to 6bpc dithering. So this is
unnecessary.

Furthermore it seems to break the new MacbookPro with retina display,
hence let's just rip this out.

Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Cc: Benoit Gschwind <gschwind@gnu-log.net>
Cc: Francois Rigaut <frigaut@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Tested-by: Bernhard Froemel <froemel at vmars tuwien.ac.at>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
--

Testing feedback highgly welcome, and thanks for Benoit for finding
out that the bpc computations are busted.
-Daniel
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems

commit 730a8128cd8978467eb1cf546b11014acb57d433 upstream.

Commit 5a783cbc4836 ("ARM: 7478/1: errata: extend workaround for erratum
 #720789") added workarounds for erratum #720789 to the range TLB
invalidation functions with the observation that the erratum only
affects SMP platforms. However, when running an SMP_ON_UP kernel on a
uniprocessor platform we must take care to preserve the ASID as the
workaround is not required.

This patch ensures that we don't set the ASID to 0 when flushing the TLB
on such a system, preserving the original behaviour with the workaround
disabled.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: 7488/1: mm: use 5 bits for swapfile type encoding

commit f5f2025ef3e2cdb593707cbf87378761f17befbe upstream.

Page migration encodes the pfn in the offset field of a swp_entry_t.
For LPAE, we support physical addresses of up to 36 bits (due to
sparsemem limitations with the size of page flags), requiring 24 bits
to represent a pfn. A further 3 bits are used to encode a swp_entry into
a pte, leaving 5 bits for the type field. Furthermore, the core code
defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not
get used.

This patch reduces the width of the type field to 5 bits, allowing us
to create up to 31 swapfiles of 64GB each.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled

commit 3d9fb0038a9b02febb01efc79a4a5d97f1822a90 upstream.

VFPv4 support depends on the VFPv3 context save/restore code, so only
advertise support in the hwcaps if the kernel can actually handle it.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop

commit b1b552a69b8805e7e338074a9e8b670b4a795218 upstream.

This patch fixes an issue introduced by patch:

    72c973d usb: gadget: add usb_endpoint_descriptor to struct usb_ep

Without this patch we see a kworker taking 100% CPU, after this sequence:

- Connect gadget to a windows host
- load g_ether
- ifconfig up <ip>; ifconfig down; ifconfig up
- ping <windows host>

The "ifconfig down" results in calling eth_stop(), which will call
usb_ep_disable() and, if the carrier is still ok, usb_ep_enable():

         usb_ep_disable(link->in_ep);
         usb_ep_disable(link->out_ep);
         if (netif_carrier_ok(net)) {
                 usb_ep_enable(link->in_ep);
                 usb_ep_enable(link->out_ep);
         }

The ep should stay enabled, but will not, as ep_disable set the desc
pointer to NULL, therefore the subsequent ep_enable will fail. This leads
to permanent rescheduling of the eth_work() worker as usb_ep_queue()
(called by the worker) will fail due to the unconfigured endpoint.

We fix this issue by saving the ep descriptors and re-assign them before
usb_ep_enable().

Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: serial: mos7840: Fixup mos7840_chars_in_buffer()

commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream.

 * Use the buffer content length as opposed to the total buffer size.  This can
   be a real problem when using the mos7840 as a usb serial-console as all
   kernel output is truncated during boot.

Signed-off-by: Mark Ferrell <mferrell@uplogix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: support the new interfaces of Huawei Data Card devices in option driver

commit ee6f827df9107139e8960326e49e1376352ced4d upstream.

In this patch, we add new declarations into option.c to support the new
interfaces of Huawei Data Card devices. And at the same time, remove the
redundant declarations from option.c.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: add USB_VENDOR_AND_INTERFACE_INFO() macro

commit d81a5d1956731c453b85c141458d4ff5d6cc5366 upstream.

A lot of Broadcom Bluetooth devices provides vendor specific interface
class and we are getting flooded by patches adding new device support.
This change will help us enable support for any other Broadcom with vendor
specific device that arrives in the future.

Only the product id changes for those devices, so this macro would be
perfect for us:

{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Henrik Rydberg <rydberg@bitmath.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: option: Add Vodafone/Huawei K5005 support

commit 4cbbb039a9719fb3bba73d255c6a95bc6dc6428b upstream.

Tested-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: ftdi_sio: Add VID/PID for Kondo Serial USB

commit 7724a1edbe463b06d4e7831a41149ba095b16c53 upstream.

This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter
interface:
http://www.kondo-robot.com/EN/wp/?cat=28

Tested by controlling an RCB3 board using libRCB3.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk.

commit 5cb7df2b2d3afee7638b3ef23a5bcb89c6f07bd9 upstream.

Gary reports that with recent kernels, he notices more xHCI driver
warnings:

xhci_hcd 0000:03:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?

We think his Etron xHCI host controller may have the same buggy behavior
as the Fresco Logic xHCI host.  When a short transfer is received, the
host will mark the transfer as successfully completed when it should be
marking it with a short completion.

Fix this by turning on the XHCI_TRUST_TX_LENGTH quirk when the Etron
host is discovered.  Note that Gary has revision 1, but if Etron fixes
this bug in future revisions, the quirk will have no effect.

This patch should be backported to kernels as old as 2.6.36, that
contain a backported version of commit
1530bbc6272d9da1e39ef8e06190d42c13a02733 "xhci: Add new short TX quirk
for Fresco Logic host."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Gary E. Miller <gem@rellim.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xhci: Increase reset timeout for Renesas 720201 host.

commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b upstream.

The NEC/Renesas 720201 xHCI host controller does not complete its reset
within 250 milliseconds.  In fact, it takes about 9 seconds to reset the
host controller, and 1 second for the host to be ready for doorbell
rings.  Extend the reset and CNR polling timeout to 10 seconds each.

This patch should be backported to kernels as old as 2.6.31, that
contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci:
BIOS handoff and HW initialization."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Edwin Klein Mentink <e.kleinmentink@zonnet.nl>
[bwh: Backported to 3.2: result of second handshake call is returned directly]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Bluetooth: Fix legacy pairing with some devices

commit a9ea3ed9b71cc3271dd59e76f65748adcaa76422 upstream.

Some devices e.g. some Android based phones don't do SDP search before
pairing and cancel legacy pairing when ACL is disconnected.

PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT
is only received after remote user entered PIN.

In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT
(2 seconds) is being used to timeout ACL connection. This results in
problems with legacy pairing as remote user has only few seconds to
enter PIN before ACL is disconnected.

Increase disconnect timeout for incomming connection to
HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists.

To avoid keeping ACL alive for too long after SDP search set ACL
timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected.

2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8
    status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01
    Role: Slave
2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00
2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 42
2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:02:72:D6:6A:3F mode 0
2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3
    handle 42 slots 5
2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 42
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 42 page 1
2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 42 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000
2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0'
2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2
    handle 42
2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3
    status 0x13 handle 42
    Error: Remote User Terminated Connection
2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 42 reason 0x13
    Reason: Remote User Terminated Connection

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
[bwh: Backported to 3.2:
 - Adjust context
 - hci_conn_ssp_enabled() is not defined; open-code the condition]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fuse: verify all ioctl retry iov elements

commit fb6ccff667712c46b4501b920ea73a326e49626a upstream.

Commit 7572777eef78ebdee1ecb7c258c0ef94d35bad16 attempted to verify that
the total iovec from the client doesn't overflow iov_length() but it
only checked the first element.  The iovec could still overflow by
starting with a small element.  The obvious fix is to check all the
elements.

The overflow case doesn't look dangerous to the kernel as the copy is
limited by the length after the overflow.  This fix restores the
intention of returning an error instead of successfully copying less
than the iovec represented.

I found this by code inspection.  I built it but don't have a test case.
I'm cc:ing stable because the initial commit did as well.

Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ext4: avoid kmemcheck complaint from reading uninitialized memory

commit 7e731bc9a12339f344cddf82166b82633d99dd86 upstream.

Commit 03179fe923 introduced a kmemcheck complaint in
ext4_da_get_block_prep() because we save and restore
ei->i_da_metadata_calc_last_lblock even though it is left
uninitialized in the case where i_da_metadata_calc_len is zero.

This doesn't hurt anything, but silencing the kmemcheck complaint
makes it easier for people to find real bugs.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=45631
(which is marked as a regression).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

pnfs: defer release of pages in layoutget

commit 8554116e17eef055d9dd58a94b3427cb2ad1c317 upstream.

we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.

hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.

Signed-off-by: Idan Kedar <idank@tonian.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fix page number calculation bug for block layout decode buffer

commit 10bd295a0b6488ebe634b72a11d8986bd3af3819 upstream.

Signed-off-by: Jim Rees <rees@umich.edu>
Suggested-by: Andy Adamson <andros@netapp.com>
Suggested-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

NFSv4.1 fix page number calculation bug for filelayout decode buffers

commit e5265a0c587423bbd21a6b39a572cecff16b9346 upstream.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

NFS: Use kcalloc() when allocating arrays

commit 7d9dea915fe333357912bce2d624ee848dfbd890 upstream.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

nfs: tear down caches in nfs_init_writepagecache when allocation fails

commit 3dd4765fce04c0b4af1e0bc4c0b10f906f95fabc upstream.

...and ensure that we tear down the nfs_commit_data cache too when
unloading the module.

Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: drop the nfs_cdata_cachep cleanup; it doesn't exist]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

HID: add ASUS AIO keyboard model AK1D

commit 2d8767bb421574dfcf48e4be0751ce7d8f73d5d7 upstream.

Add Asus All-In-One PC keyboard model AK1D.

BugLink: https://bugs.launchpad.net/bugs/1027789
Signed-off-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Linux 3.2.28

drm/radeon: do not reenable crtc after moving vram start address

commit 81ee8fb6b52ec69eeed37fe7943446af1dccecc5 upstream.

It seems we can not update the crtc scanout address. After disabling
crtc, update to base address do not take effect after crtc being
reenable leading to at least frame being scanout from the old crtc
base address. Disabling crtc display request lead to same behavior.

So after changing the vram address if we don't keep crtc disabled
we will have the GPU trying to read some random system memory address
with some iommu this will broke the crtc engine and will lead to
broken display and iommu error message.

So to avoid this, disable crtc. For flicker less boot we will need
to avoid moving the vram start address.

This patch should also fix :

https://bugs.freedesktop.org/show_bug.cgi?id=42373

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: fix bank tiling parameters on cayman

commit 5b23c9045a8b61352986270b2d109edf5085e113 upstream.

Handle the 16 bank case.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: fix bank tiling parameters on evergreen

commit c8d15edc17d836686d1f071e564800e1a2724fa6 upstream.

Handle the 16 bank case.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/compat: fix mmap compat system calls

commit e85871218513c54f7dfdb6009043cb638f2fecbe upstream.

The native 31 bit and the compat behaviour for the mmap system calls differ:

In native 31 bit mode the passed in address for the mmap system call will be
unmodified passed to sys_mmap_pgoff().
In compat mode however the passed in address will be modified with
compat_ptr() which masks out the most significant bit.

The result is that in native 31 bit mode each mmap request (with MAP_FIXED)
will fail where the most significat bit is set, while in compat mode it
may succeed.

This odd behaviour was introduced with d3815898 "[S390] mmap: add missing
compat_ptr conversion to both mmap compat syscalls".

To restore a consistent behaviour accross native and compat mode this
patch functionally reverts the above mentioned commit.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/compat: fix compat wrappers for process_vm system calls

commit 82aabdb6f1eb61e0034ec23901480f5dd23db7c4 upstream.

The compat wrappers incorrectly called the non compat versions of
the system process_vm system calls.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915: correctly order the ring init sequence

commit 0d8957c8a90bbb5d34fab9a304459448a5131e06 upstream.

We may only start to set up the new register values after having
confirmed that the ring is truely off. Otherwise the hw might lose the
newly written register values. This is caught later on in the init
sequence, when we check whether the register writes have stuck.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522
Tested-by: Yang Guang <guang.a.yang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915: Add wait_for in init_ring_common

commit f01db988ef6f6c70a6cc36ee71e4a98a68901229 upstream.

I have seen a number of "blt ring initialization failed" messages
where the ctl or start registers are not the correct value. Upon further
inspection, if the code just waited a little bit, it would read the
correct value. Adding the wait_for to these reads should eliminate the
issue.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Input: eeti_ts: pass gpio value instead of IRQ

commit 4eef6cbfcc03b294d9d334368a851b35b496ce53 upstream.

The EETI touchscreen asserts its IRQ line as soon as it has data in its
internal buffers. The line is automatically deasserted once all data has
been read via I2C. Hence, the driver has to monitor the GPIO line and
cannot simply rely on the interrupt handler reception.

In the current implementation of the driver, irq_to_gpio() is used to
determine the GPIO number from the i2c_client's IRQ value.

As irq_to_gpio() is not available on all platforms, this patch changes
this and makes the driver ignore the passed in IRQ. Instead, a GPIO is
added to the platform_data struct and gpio_to_irq is used to derive the
IRQ from that GPIO. If this fails, bail out. The driver is only able to
work in environments where the touchscreen GPIO can be mapped to an
IRQ.

Without this patch, building raumfeld_defconfig results in:

drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: linux-input@vger.kernel.org
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
[bwh: Backported to 3.2: raumfeld_controller_i2c_board_info.irq was
 initialised using gpio_to_irq(), but this doesn't seem to matter]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: pxa: remove irq_to_gpio from ezx-pcap driver

commit 59ee93a528b94ef4e81a08db252b0326feff171f upstream.

The irq_to_gpio function was removed from the pxa platform
in linux-3.2, and this driver has been broken since.

There is actually no in-tree user of this driver that adds
this platform device, but the driver can and does get enabled
on some platforms.

Without this patch, building ezx_defconfig results in:

drivers/mfd/ezx-pcap.c: In function 'pcap_isr_work':
drivers/mfd/ezx-pcap.c:205:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - Fix double quirk for Quanta FL1 / Lenovo Ideapad

commit 012e7eb1e501d0120e0383b81477f63091f5e365 upstream.

The same ID is twice in the quirk table, so the second one is not used.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - remove quirk for Dell Vostro 1015

commit e9fc83cb2e5877801a255a37ddbc5be996ea8046 upstream.

This computer is confirmed working with model=auto on kernel 3.2.
Also, parsing fails with hda-emu with the current model.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

e1000e: NIC goes up and immediately goes down

commit b7ec70be01a87f2c85df3ae11046e74f9b67e323 upstream.

Found that commit d478eb44 was a bad commit.
If the link partner is transmitting codeword (even if NULL codeword),
then the RXCW.C bit will be set so check for RXCW.CW is unnecessary.
Ref: RH BZ 840642

Reported-by: Fabio Futigami <ffutigam@redhat.com>
Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
CC: Marcelo Ricardo Leitner <mleitner@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - add dock support for Thinkpad X230

commit c8415a48fcb7a29889f4405d38c57db351e4b50a upstream.

As with the ThinkPad Models X230 Tablet and T530 the X230 needs a qurik to
correctly set up the pins for the dock port.

Signed-off-by: Felix Kaechele <felix@fetzig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

iwlwifi: disable greenfield transmissions as a workaround

commit 50e2a30cf6fcaeb2d27360ba614dd169a10041c5 upstream.

There's a bug that causes the rate scaling to get stuck
when it has to use single-stream rates with a peer that
can do GF and SGI; the two are incompatible so we can't
use them together, but that causes the algorithm to not
work at all, it always rejects updates.

Disable greenfield for now to prevent that problem.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rt61pci: fix NULL pointer dereference in config_lna_gain

commit deee0214def5d8a32b8112f11d9c2b1696e9c0cb upstream.

We can not pass NULL libconf->conf->channel to rt61pci_config() as it
is dereferenced unconditionally in rt61pci_config_lna_gain() subroutine.

Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=44361

Reported-and-tested-by: <dolohow@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

cfg80211: process pending events when unregistering net device

commit 1f6fc43e621167492ed4b7f3b4269c584c3d6ccc upstream.

libertas currently calls cfg80211_disconnected() when it is being
brought down. This causes an event to be allocated, but since the
wdev is already removed from the rdev by the time that the event
processing work executes, the event is never processed or freed.
http://article.gmane.org/gmane.linux.kernel.wireless.general/95666

Fix this leak, and other possible situations, by processing the event
queue when a device is being unregistered. Thanks to Johannes Berg for
the suggestion.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - add dock support for Thinkpad T430s

commit 4407be6ba217514b1bc01488f8b56467d309e416 upstream.

Add a model/fixup string "lenovo-dock", for Thinkpad T430s, to allow
sound in docking station.

Tested on Lenovo T430s with ThinkPad Mini Dock Plus Series 3

Signed-off-by: Philipp A. Mohrenweiser <phiamo@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfig

commit 3bed491c8d28329e34f8a31e3fe64d03f3a350f1 upstream.

The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig,
this caused severe breakage of userland applications since the upper
limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is
set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr
if needed.

Quoting Russell King [1]:

"4096 is also fine for ARM too. There's not much point in having
defconfigs change it - that would just be pure noise in the config
files."

the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig
altogether.

This problem was introduced by commit cde7c41 (ARM: configs: add
defconfig for mach-mxs).

[1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ath9k: Add PID/VID support for AR1111

commit d4e5979c0da95791aa717c18e162540c7a596360 upstream.

AR1111 is same as AR9485. The h/w
difference between them is quite insignificant,
Felix suggests only very few baseband features
may not be available in AR1111. The h/w code for
AR9485 is already present, so AR1111 should
work fine with the addition of its PID/VID.

Cc: Felix Bitterli <felixb@qca.qualcomm.com>
Reported-by: Tim Bentley <Tim.Bentley@Gmail.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Tested-by: Tim Bentley <Tim.Bentley@Gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mac80211: cancel mesh path timer

commit dd4c9260e7f23f2e951cbfb2726e468c6d30306c upstream.

The mesh path timer needs to be canceled when
leaving the mesh as otherwise it could fire
after the interface has been removed already.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

KVM: VMX: Advertise CPU_BASED_RDPMC_EXITING for nested guests

Based on commit fee84b079d5ddee2247b5c1f53162c330c622902 upstream.

  Intercept RDPMC and forward it to the PMU emulation code.

Newer vmx support will only allow to load the kvm_intel module
if RDPMC_EXITING is supported. Even without the actual support
this part of the change is required on 3.2 hosts.

BugLink: http://bugs.launchpad.net/bugs/1031090
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/i915: fixup seqno allocation logic for lazy_request

commit 53d227f282eb9fa4c7cdbfd691fa372b7ca8c4c3 upstream.

Currently we reserve seqnos only when we emit the request to the ring
(by bumping dev_priv->next_seqno), but start using it much earlier for
ring->oustanding_lazy_request. When 2 threads compete for the gpu and
run on two different rings (e.g. ddx on blitter vs. compositor)
hilarity ensued, especially when we get constantly interrupted while
reserving buffers.

Breakage seems to have been introduced in

commit 6f392d548658a17600da7faaf8a5df25ee5f01f6
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Sat Aug 7 11:01:22 2010 +0100

    drm/i915: Use a common seqno for all rings.

This patch fixes up the seqno reservation logic by moving it into
i915_gem_next_request_seqno. The ring->add_request functions now
superflously still return the new seqno through a pointer, that will
be refactored in the next patch.

Note that with this change we now unconditionally allocate a seqno,
even when ->add_request might fail because the rings are full and the
gpu died. But this does not open up a new can of worms because we can
already leave behind an outstanding_request_seqno if e.g. the caller
gets interrupted with a signal while stalling for the gpu in the
eviciton paths. And with the bugfix we only ever have one seqno
allocated per ring (and only that ring), so there are no ordering
issues with multiple outstanding seqnos on the same ring.

v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it
clear that we only have one seqno counter for all rings. Suggested by
Chris Wilson.

v3: As suggested by Chris Wilson use i915_gem_next_request_seqno
instead of ring->oustanding_lazy_request to make the follow-up
refactoring more clearly correct. Also improve the commit message
with issues discussed on irc.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181
Tested-by: Nicolas Kalkhof nkalkhof()at()web.de
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hfsplus: fix overflow in sector calculations in hfsplus_submit_bio

commit a6dc8c04218eb752ff79cdc24a995cf51866caed upstream.

The variable io_size was unsigned int, which caused the wrong sector number
to be calculated after aligning it. This then caused mount to fail with big
volumes, as backup volume header information was searched from a
wrong sector.

Signed-off-by: Janne Kalliomäki <janne@tuxera.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtlwifi: rtl8192cu: Change buffer allocation for synchronous reads

commit 3ce4d85b76010525adedcc2555fa164bf706a2f3 upstream.

In commit a7959c1, the USB part of rtlwifi was switched to convert
_usb_read_sync() to using a preallocated buffer rather than one
that has been acquired using kmalloc. Although this routine is named
as though it were synchronous, there seem to be simultaneous users,
and the selection of the index to the data buffer is not multi-user
safe. This situation is addressed by adding a new spinlock. The routine
cannot sleep, thus a mutex is not allowed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

e1000: add dropped DMA receive enable back in for WoL

commit b868179c47e9e8eadcd04c1f3105998e528988a3 upstream.

Commit d5bc77a223b0e9b9dfb002048d2b34a79e7d0b48 broke Wake-on-LAN by
inadvertently dropping the enabling of DMA receives.

Restore the enabling of DMA receives for WoL.

This is applicable to 3.1+ stable trees.

Reported-by: Tobias Klausmann <klausman@schwarzvogel.de>
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net/tun: fix ioctl() based info leaks

[ Upstream commits a117dacde0288f3ec60b6e5bcedae8fa37ee0dfc
  and 8bbb181308bc348e02bfdbebdedd4e4ec9d452ce ]

The tun module leaks up to 36 bytes of memory by not fully initializing
a structure located on the stack that gets copied to user memory by the
TUNGETIFF and SIOCGIFHWADDR ioctl()s.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tcp: perform DMA to userspace only if there is a task waiting for it

[ Upstream commit 59ea33a68a9083ac98515e4861c00e71efdc49a1 ]

Back in 2006, commit 1a2449a87b ("[I/OAT]: TCP recv offload to I/OAT")
added support for receive offloading to IOAT dma engine if available.

The code in tcp_rcv_established() tries to perform early DMA copy if
applicable. It however does so without checking whether the userspace
task is actually expecting the data in the buffer.

This is not a problem under normal circumstances, but there is a corner
case where this doesn't work -- and that's when MSG_TRUNC flag to
recvmsg() is used.

If the IOAT dma engine is not used, the code properly checks whether
there is a valid ucopy.task and the socket is owned by userspace, but
misses the check in the dmaengine case.

This problem can be observed in real trivially -- for example 'tbench' is a
good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing
IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they
have been already early-copied in tcp_rcv_established() using dma engine.

This patch introduces the same check we are performing in the simple
iovec copy case to the IOAT case as well. It fixes the indefinite
recvmsg(MSG_TRUNC) hangs.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: fix rtnetlink IFF_PROMISC and IFF_ALLMULTI handling

[ Upstream commit b1beb681cba5358f62e6187340660ade226a5fcc ]

When device flags are set using rtnetlink, IFF_PROMISC and IFF_ALLMULTI
flags are handled specially. Function dev_change_flags sets IFF_PROMISC and
IFF_ALLMULTI bits in dev->gflags according to the passed value but
do_setlink passes a result of rtnl_dev_combine_flags which takes those bits
from dev->flags.

This can be easily trigerred by doing:

tcpdump -i eth0 &
ip l s up eth0

ip sets IFF_UP flag in ifi_flags and ifi_change, which is combined with
IFF_PROMISC by rtnl_dev_combine_flags, causing __dev_change_flags to set
IFF_PROMISC in gflags.

Reported-by: Max Matveev <makc@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: kaweth.c: use GFP_ATOMIC under spin_lock

[ Upstream commit e4c7f259c5be99dcfc3d98f913590663b0305bf8 ]

The problem is that we call this with a spin lock held.  The call tree
is:
kaweth_start_xmit() holds kaweth->device_lock.
-> kaweth_async_set_rx_mode()
   -> kaweth_control()
      -> kaweth_internal_control_msg()

The kaweth_internal_control_msg() function is only called from
kaweth_control() which used GFP_ATOMIC for its allocations.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tcp: Add TCP_USER_TIMEOUT negative value check

[ Upstream commit 42493570100b91ef663c4c6f0c0fdab238f9d3c2 ]

TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But
patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative
values. If a user assign -1 to it, the socket will set successfully and wait
for 4294967295 miliseconds. This patch add a negative value check to avoid
this issue.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

wanmain: comparing array with NULL

[ Upstream commit 8b72ff6484fe303e01498b58621810a114f3cf09 ]

gcc really should warn about these !

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

caif: fix NULL pointer check

[ Upstream commit c66b9b7d365444b433307ebb18734757cb668a02 ]

Reported-by: <rucsoftsec@gmail.com>
Resolves-bug: http://bugzilla.kernel.org/show_bug?44441
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

cipso: don't follow a NULL pointer when setsockopt() is called

[ Upstream commit 89d7ae34cdda4195809a5a987f697a517a2a3177 ]

As reported by Alan Cox, and verified by Lin Ming, when a user
attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL
tag the kernel dies a terrible death when it attempts to follow a NULL
pointer (the skb argument to cipso_v4_validate() is NULL when called via
the setsockopt() syscall).

This patch fixes this by first checking to ensure that the skb is
non-NULL before using it to find the incoming network interface.  In
the unlikely case where the skb is NULL and the user attempts to add
a CIPSO option with the _TAG_LOCAL tag we return an error as this is
not something we want to allow.

A simple reproducer, kindly supplied by Lin Ming, although you must
have the CIPSO DOI #3 configure on the system first or you will be
caught early in cipso_v4_validate():

#include <sys/types.h>
#include <sys/socket.h>
#include <linux/ip.h>
#include <linux/in.h>
#include <string.h>

struct local_tag {
char type;
char length;
char info[4];
};

struct cipso {
char type;
char length;
char doi[4];
struct local_tag local;
};

int main(int argc, char **argv)
{
int sockfd;
struct cipso cipso = {
.type = IPOPT_CIPSO,
.length = sizeof(struct cipso),
.local = {
.type = 128,
.length = sizeof(struct local_tag),
},
};

memset(cipso.doi, 0, 4);
cipso.doi[3] = 3;

sockfd = socket(AF_INET, SOCK_DGRAM, 0);
#define SOL_IP 0
setsockopt(sockfd, SOL_IP, IP_OPTIONS,
&cipso, sizeof(struct cipso));

return 0;
}

CC: Lin Ming <mlin@ss.pku.edu.cn>
Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

caif: Fix access to freed pernet memory

[ Upstream commit 96f80d123eff05c3cd4701463786b87952a6c3ac ]

unregister_netdevice_notifier() must be called before
unregister_pernet_subsys() to avoid accessing already freed
pernet memory. This fixes the following oops when doing rmmod:

Call Trace:
 [<ffffffffa0f802bd>] caif_device_notify+0x4d/0x5a0 [caif]
 [<ffffffff81552ba9>] unregister_netdevice_notifier+0xb9/0x100
 [<ffffffffa0f86dcc>] caif_device_exit+0x1c/0x250 [caif]
 [<ffffffff810e7734>] sys_delete_module+0x1a4/0x300
 [<ffffffff810da82d>] ? trace_hardirqs_on_caller+0x15d/0x1e0
 [<ffffffff813517de>] ? trace_hardirqs_on_thunk+0x3a/0x3
 [<ffffffff81696bad>] system_call_fastpath+0x1a/0x1f

RIP
 [<ffffffffa0f7f561>] caif_get+0x51/0xb0 [caif]

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sctp: Fix list corruption resulting from freeing an association on a list

[ Upstream commit 2eebc1e188e9e45886ee00662519849339884d6d ]

A few days ago Dave Jones reported this oops:

[22766.294255] general protection fault: 0000 [#1] PREEMPT SMP
[22766.295376] CPU 0
[22766.295384] Modules linked in:
[22766.387137]  ffffffffa169f292 6b6b6b6b6b6b6b6b ffff880147c03a90
ffff880147c03a74
[22766.387135] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000
[22766.387136] Process trinity-watchdo (pid: 10896, threadinfo ffff88013e7d2000,
[22766.387137] Stack:
[22766.387140]  ffff880147c03a10
[22766.387140]  ffffffffa169f2b6
[22766.387140]  ffff88013ed95728
[22766.387143]  0000000000000002
[22766.387143]  0000000000000000
[22766.387143]  ffff880003fad062
[22766.387144]  ffff88013c120000
[22766.387144]
[22766.387145] Call Trace:
[22766.387145]  <IRQ>
[22766.387150]  [<ffffffffa169f292>] ? __sctp_lookup_association+0x62/0xd0
[sctp]
[22766.387154]  [<ffffffffa169f2b6>] __sctp_lookup_association+0x86/0xd0 [sctp]
[22766.387157]  [<ffffffffa169f597>] sctp_rcv+0x207/0xbb0 [sctp]
[22766.387161]  [<ffffffff810d4da8>] ? trace_hardirqs_off_caller+0x28/0xd0
[22766.387163]  [<ffffffff815827e3>] ? nf_hook_slow+0x133/0x210
[22766.387166]  [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0
[22766.387168]  [<ffffffff8159043d>] ip_local_deliver_finish+0x18d/0x4c0
[22766.387169]  [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0
[22766.387171]  [<ffffffff81590a07>] ip_local_deliver+0x47/0x80
[22766.387172]  [<ffffffff8158fd80>] ip_rcv_finish+0x150/0x680
[22766.387174]  [<ffffffff81590c54>] ip_rcv+0x214/0x320
[22766.387176]  [<ffffffff81558c07>] __netif_receive_skb+0x7b7/0x910
[22766.387178]  [<ffffffff8155856c>] ? __netif_receive_skb+0x11c/0x910
[22766.387180]  [<ffffffff810d423e>] ? put_lock_stats.isra.25+0xe/0x40
[22766.387182]  [<ffffffff81558f83>] netif_receive_skb+0x23/0x1f0
[22766.387183]  [<ffffffff815596a9>] ? dev_gro_receive+0x139/0x440
[22766.387185]  [<ffffffff81559280>] napi_skb_finish+0x70/0xa0
[22766.387187]  [<ffffffff81559cb5>] napi_gro_receive+0xf5/0x130
[22766.387218]  [<ffffffffa01c4679>] e1000_receive_skb+0x59/0x70 [e1000e]
[22766.387242]  [<ffffffffa01c5aab>] e1000_clean_rx_irq+0x28b/0x460 [e1000e]
[22766.387266]  [<ffffffffa01c9c18>] e1000e_poll+0x78/0x430 [e1000e]
[22766.387268]  [<ffffffff81559fea>] net_rx_action+0x1aa/0x3d0
[22766.387270]  [<ffffffff810a495f>] ? account_system_vtime+0x10f/0x130
[22766.387273]  [<ffffffff810734d0>] __do_softirq+0xe0/0x420
[22766.387275]  [<ffffffff8169826c>] call_softirq+0x1c/0x30
[22766.387278]  [<ffffffff8101db15>] do_softirq+0xd5/0x110
[22766.387279]  [<ffffffff81073bc5>] irq_exit+0xd5/0xe0
[22766.387281]  [<ffffffff81698b03>] do_IRQ+0x63/0xd0
[22766.387283]  [<ffffffff8168ee2f>] common_interrupt+0x6f/0x6f
[22766.387283]  <EOI>
[22766.387284]
[22766.387285]  [<ffffffff8168eed9>] ? retint_swapgs+0x13/0x1b
[22766.387285] Code: c0 90 5d c3 66 0f 1f 44 00 00 4c 89 c8 5d c3 0f 1f 00 55 48
89 e5 48 83
ec 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 <0f> b7 87 98 00 00 00
48 89 fb
49 89 f5 66 c1 c0 08 66 39 46 02
[22766.387307]
[22766.387307] RIP
[22766.387311]  [<ffffffffa168a2c9>] sctp_assoc_is_match+0x19/0x90 [sctp]
[22766.387311]  RSP <ffff880147c039b0>
[22766.387142]  ffffffffa16ab120
[22766.599537] ---[ end trace 3f6dae82e37b17f5 ]---
[22766.601221] Kernel panic - not syncing: Fatal exception in interrupt

It appears from his analysis and some staring at the code that this is likely
occuring because an association is getting freed while still on the
sctp_assoc_hashtable.  As a result, we get a gpf when traversing the hashtable
while a freed node corrupts part of the list.

Nominally I would think that an mibalanced refcount was responsible for this,
but I can't seem to find any obvious imbalance.  What I did note however was
that the two places where we create an association using
sctp_primitive_ASSOCIATE (__sctp_connect and sctp_sendmsg), have failure paths
which free a newly created association after calling sctp_primitive_ASSOCIATE.
sctp_primitive_ASSOCIATE brings us into the sctp_sf_do_prm_asoc path, which
issues a SCTP_CMD_NEW_ASOC side effect, which in turn adds a new association to
the aforementioned hash table.  the sctp command interpreter that process side
effects has not way to unwind previously processed commands, so freeing the
association from the __sctp_connect or sctp_sendmsg error path would lead to a
freed association remaining on this hash table.

I've fixed this but modifying sctp_[un]hash_established to use hlist_del_init,
which allows us to proerly use hlist_unhashed to check if the node is on a
hashlist safely during a delete.  That in turn alows us to safely call
sctp_unhash_established in the __sctp_connect and sctp_sendmsg error paths
before freeing them, regardles of what the associations state is on the hash
list.

I noted, while I was doing this, that the __sctp_unhash_endpoint was using
hlist_unhsashed in a simmilar fashion, but never nullified any removed nodes
pointers to make that function work properly, so I fixed that up in a simmilar
fashion.

I attempted to test this using a virtual guest running the SCTP_RR test from
netperf in a loop while running the trinity fuzzer, both in a loop.  I wasn't
able to recreate the problem prior to this fix, nor was I able to trigger the
failure after (neither of which I suppose is suprising).  Given the trace above
however, I think its likely that this is what we hit.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: davej@redhat.com
CC: davej@redhat.com
CC: "David S. Miller" <davem@davemloft.net>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Sridhar Samudrala <sri@us.ibm.com>
CC: linux-sctp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sch_sfb: Fix missing NULL check

[ Upstream commit 7ac2908e4b2edaec60e9090ddb4d9ceb76c05e7d ]

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44461

Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>